path: root/Bindings/remoteproc/qcom,sc7280-adsp-pil.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-adsp-pil.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm SC7280 ADSP Peripheral Image Loader

maintainers:
  - Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>

description:
  This document describes the hardware for a component that loads and boots firmware
  on the Qualcomm Technology Inc. ADSP.

properties:
  compatible:
    enum:
      - qcom,sc7280-adsp-pil

  reg:
    items:
      - description: qdsp6ss register
      - description: efuse q6ss register

  iommus:
    items:
      - description: Phandle to apps_smmu node with sid mask

  interrupts:
    items:
      - description: Watchdog interrupt
      - description: Fatal interrupt
      - description: Ready interrupt
      - description: Handover interrupt
      - description: Stop acknowledge interrupt
      - description: Shutdown acknowledge interrupt

  interrupt-names:
    items:
      - const: wdog
      - const: fatal
      - const: ready
      - const: handover
      - const: stop-ack
      - const: shutdown-ack

  clocks:
    items:
      - description: XO clock
      - description: GCC CFG NOC LPASS clock

  clock-names:
    items:
      - const: xo
      - const: gcc_cfg_noc_lpass

  power-domains:
    items:
      - description: LCX power domain

  resets:
    items:
      - description: PDC AUDIO SYNC RESET
      - description: CC LPASS restart

  reset-names:
    items:
      - const: pdc_sync
      - const: cc_lpass

  memory-region:
    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  qcom,halt-regs:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description:
      Phandle reference to a syscon representing TCSR followed by the
      four offsets within syscon for q6, modem, nc and qv6 halt registers.
    items:
      - items:
          - description: phandle to TCSR_MUTEX registers
          - description: offset to the Q6 halt register
          - description: offset to the modem halt register
          - description: offset to the nc halt register
          - description: offset to the vq6 halt register

  qcom,smem-states:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description: States used by the AP to signal the Hexagon core
    items:
      - description: Stop the modem

  qcom,smem-state-names:
    description: The names of the state bits used for SMP2P output
    const: stop

  qcom,qmp:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: Reference to the AOSS side-channel message RAM.

  glink-edge:
    $ref: qcom,glink-edge.yaml#
    type: object
    unevaluatedProperties: false
    description: |
      Qualcomm G-Link subnode which represents communication edge, channels
      and devices related to the ADSP.

    properties:
      label:
        const: lpass

      gpr: true
      apr: false
      fastrpc: false

    required:
      - label

required:
  - compatible
  - reg
  - interrupts
  - interrupt-names
  - clocks
  - clock-names
  - power-domains
  - resets
  - reset-names
  - qcom,halt-regs
  - memory-region
  - qcom,smem-states
  - qcom,smem-state-names
  - qcom,qmp

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/qcom,rpmh.h>
    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
    #include <dt-bindings/clock/qcom,lpass-sc7280.h>
    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
    #include <dt-bindings/power/qcom-rpmpd.h>
    #include <dt-bindings/mailbox/qcom-ipcc.h>

    remoteproc@3000000 {
        compatible = "qcom,sc7280-adsp-pil";
        reg = <0x03000000 0x5000>,
              <0x0355b000 0x10>;

        interrupts-extended = <&pdc 162 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;

        interrupt-names = "wdog", "fatal", "ready",
                "handover", "stop-ack", "shutdown-ack";

        clocks = <&rpmhcc RPMH_CXO_CLK>,
                 <&gcc GCC_CFG_NOC_LPASS_CLK>;
        clock-names = "xo", "gcc_cfg_noc_lpass";

        power-domains = <&rpmhpd SC7280_LCX>;

        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
        reset-names = "pdc_sync", "cc_lpass";

        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;

        memory-region = <&adsp_mem>;

        qcom,smem-states = <&adsp_smp2p_out 0>;
        qcom,smem-state-names = "stop";

        qcom,qmp = <&aoss_qmp>;

        glink-edge {
            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
                                         IPCC_MPROC_SIGNAL_GLINK_QMP
                                         IRQ_TYPE_EDGE_RISING>;
            mboxes = <&ipcc IPCC_CLIENT_LPASS
                            IPCC_MPROC_SIGNAL_GLINK_QMP>;

            label = "lpass";
            qcom,remote-pid = <2>;
        };
    };