vdev_disk: rewrite BIO filling machinery to avoid split pages

This commit tackles a number of issues in the way BIOs (`struct bio`)
are constructed for submission to the Linux block layer.

The kernel has a hard upper limit on the number of pages/segments that
can be added to a BIO, as well as a separate limit for each device
(related to its queue depth and other scheduling characteristics).

ZFS counts the number of memory pages in the request ABD
(`abd_nr_pages_off()`, and then uses that as the number of segments to
put into the BIO, up to the hard upper limit. If it requires more than
the limit, it will create multiple BIOs.

Leaving aside the fact that page count method is wrong (see below), not
limiting to the device segment max means that the device driver will
need to split the BIO in half. This is alone is not necessarily a
problem, but it interacts with another issue to cause a much larger
problem.

The kernel function to add a segment to a BIO (`bio_add_page()`) takes a
`struct page` pointer, and offset+len within it. `struct page` can
represent a run of contiguous memory pages (known as a "compound page").
In can be of arbitrary length.

The ZFS functions that count ABD pages and load them into the BIO
(`abd_nr_pages_off()`, `bio_map()` and `abd_bio_map_off()`) will never
consider a page to be more than `PAGE_SIZE` (4K), even if the `struct
page` is for multiple pages. In this case, it will load the same `struct
page` into the BIO multiple times, with the offset adjusted each time.

With a sufficiently large ABD, this can easily lead to the BIO being
entirely filled much earlier than it could have been. This is also
further contributes to the problem caused by the incorrect segment limit
calculation, as its much easier to go past the device limit, and so
require a split.

Again, this is not a problem on its own.

The logic for "never submit more than `PAGE_SIZE`" is actually a little
more subtle. It will actually never submit a buffer that crosses a 4K
page boundary.

In practice, this is fine, as most ABDs are scattered, that is a list of
complete 4K pages, and so are loaded in as such.

Linear ABDs are typically allocated from slabs, and for small sizes they
are frequently not aligned to page boundaries. For example, a 12K
allocation can span four pages, eg:

     -- 4K -- -- 4K -- -- 4K -- -- 4K --
    |        |        |        |        |
          :## ######## ######## ######:    [1K, 4K, 4K, 3K]

Such an allocation would be loaded into a BIO as you see:

    [1K, 4K, 4K, 3K]

This tends not to be a problem in practice, because even if the BIO were
filled and needed to be split, each half would still have either a start
or end aligned to the logical block size of the device (assuming 4K at
least).

---

In ideal circumstances, these shortcomings don't cause any particular
problems. Its when they start to interact with other ZFS features that
things get interesting.

Aggregation will create a "gang" ABD, which is simply a list of other
ABDs. Iterating over a gang ABD is just iterating over each ABD within
it in turn.

Because the segments are simply loaded in order, we can end up with
uneven segments either side of the "gap" between the two ABDs. For
example, two 12K ABDs might be aggregated and then loaded as:

    [1K, 4K, 4K, 3K, 2K, 4K, 4K, 2K]

Should a split occur, each individual BIO can end up either having an
start or end offset that is not aligned to the logical block size, which
some drivers (eg SCSI) will reject. However, this tends not to happen
because the default aggregation limit usually keeps the BIO small enough
to not require more than one split, and most pages are actually full 4K
pages, so hitting an uneven gap is very rare anyway.

If the pool is under particular memory pressure, then an IO can be
broken down into a "gang block", a 512-byte block composed of a header
and up to three block pointers. Each points to a fragment of the
original write, or in turn, another gang block, breaking the original
data up over and over until space can be found in the pool for each of
them.

Each gang header is a separate 512-byte memory allocation from a slab,
that needs to be written down to disk. When the gang header is added to
the BIO, its a single 512-byte segment.

Pulling all this together, consider a large aggregated write of gang
blocks. This results a BIO containing lots of 512-byte segments. Given
our tendency to overfill the BIO, a split is likely, and most possible
split points will yield a pair of BIOs that are misaligned. Drivers that
care, like the SCSI driver, will reject them.

---

This commit is a substantial refactor and rewrite of much of `vdev_disk`
to sort all this out.

`vdev_bio_max_segs()` now returns the ideal maximum size for the device,
if available. There's also a tuneable `zfs_vdev_disk_max_segs` to
override this, to assist with testing.

We scan the ABD up front to count the number of pages within it, and to
confirm that if we submitted all those pages to one or more BIOs, it
could be split at any point with creating a misaligned BIO.  If the
pages in the BIO are not usable (as in any of the above situations), the
ABD is linearised, and then checked again. This is the same technique
used in `vdev_geom` on FreeBSD, adjusted for Linux's variable page size
and allocator quirks.

`vbio_t` is a cleanup and enhancement of the old `dio_request_t`. The
idea is simply that it can hold all the state needed to create, submit
and return multiple BIOs, including all the refcounts, the ABD copy if
it was needed, and so on. Apart from what I hope is a clearer interface,
the major difference is that because we know how many BIOs we'll need up
front, we don't need the old overflow logic that would grow the BIO
array, throw away all the old work and restart. We can get it right from
the start.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes #15533
Closes #15588

3 files changed, 447 insertions, 3 deletions

diff --git a/include/os/linux/kernel/linux/mod_compat.h b/include/os/linux/kernel/linux/mod_compat.h
index 8e20a9613539..039865b703ef 100644
--- a/include/os/linux/kernel/linux/mod_compat.h
+++ b/include/os/linux/kernel/linux/mod_compat.h
@@ -68,6 +68,7 @@ enum scope_prefix_types {
 	zfs_trim,
 	zfs_txg,
 	zfs_vdev,
+	zfs_vdev_disk,
 	zfs_vdev_file,
 	zfs_vdev_mirror,
 	zfs_vnops,
diff --git a/man/man4/zfs.4 b/man/man4/zfs.4
index 759a68784aca..61f1df9c81d5 100644
--- a/man/man4/zfs.4
+++ b/man/man4/zfs.4
@@ -2,6 +2,7 @@
 .\" Copyright (c) 2013 by Turbo Fredriksson <turbo@bayour.com>. All rights reserved.
 .\" Copyright (c) 2019, 2021 by Delphix. All rights reserved.
 .\" Copyright (c) 2019 Datto Inc.
+.\" Copyright (c) 2023, 2024 Klara, Inc.
 .\" The contents of this file are subject to the terms of the Common Development
 .\" and Distribution License (the "License").  You may not use this file except
 .\" in compliance with the License. You can obtain a copy of the license at
@@ -15,7 +16,7 @@
 .\" own identifying information:
 .\" Portions Copyright [yyyy] [name of copyright owner]
 .\"
-.Dd July 21, 2023
+.Dd January 9, 2024
 .Dt ZFS 4
 .Os
 .
@@ -1375,6 +1376,13 @@ _
 	4	Driver	No driver retries on driver errors.
 .TE
 .
+.It Sy zfs_vdev_disk_max_segs Ns = Ns Sy 0 Pq uint
+Maximum number of segments to add to a BIO (min 4).
+If this is higher than the maximum allowed by the device queue or the kernel
+itself, it will be clamped.
+Setting it to zero will cause the kernel's ideal size to be used.
+This parameter only applies on Linux.
+.
 .It Sy zfs_expire_snapshot Ns = Ns Sy 300 Ns s Pq int
 Time before expiring
 .Pa .zfs/snapshot .
diff --git a/module/os/linux/zfs/vdev_disk.c b/module/os/linux/zfs/vdev_disk.c
index de4dba72fa3c..0ccb9ad96fa5 100644
--- a/module/os/linux/zfs/vdev_disk.c
+++ b/module/os/linux/zfs/vdev_disk.c
@@ -24,6 +24,7 @@
  * Rewritten for Linux by Brian Behlendorf <behlendorf1@llnl.gov>.
  * LLNL-CODE-403049.
  * Copyright (c) 2012, 2019 by Delphix. All rights reserved.
+ * Copyright (c) 2023, 2024, Klara Inc.
  */
 
 #include <sys/zfs_context.h>
@@ -67,6 +68,13 @@ typedef struct vdev_disk {
 } vdev_disk_t;
 
 /*
+ * Maximum number of segments to add to a bio (min 4). If this is higher than
+ * the maximum allowed by the device queue or the kernel itself, it will be
+ * clamped. Setting it to zero will cause the kernel's ideal size to be used.
+ */
+uint_t zfs_vdev_disk_max_segs = 0;
+
+/*
  * Unique identifier for the exclusive vdev holder.
  */
 static void *zfs_vdev_holder = VDEV_HOLDER;
@@ -607,10 +615,433 @@ vdev_bio_alloc(struct block_device *bdev, gfp_t gfp_mask,
 	return (bio);
 }
 
+static inline uint_t
+vdev_bio_max_segs(struct block_device *bdev)
+{
+	/*
+	 * Smallest of the device max segs and the tuneable max segs. Minimum
+	 * 4, so there's room to finish split pages if they come up.
+	 */
+	const uint_t dev_max_segs = queue_max_segments(bdev_get_queue(bdev));
+	const uint_t tune_max_segs = (zfs_vdev_disk_max_segs > 0) ?
+	    MAX(4, zfs_vdev_disk_max_segs) : dev_max_segs;
+	const uint_t max_segs = MIN(tune_max_segs, dev_max_segs);
+
+#ifdef HAVE_BIO_MAX_SEGS
+	return (bio_max_segs(max_segs));
+#else
+	return (MIN(max_segs, BIO_MAX_PAGES));
+#endif
+}
+
+static inline uint_t
+vdev_bio_max_bytes(struct block_device *bdev)
+{
+	return (queue_max_sectors(bdev_get_queue(bdev)) << 9);
+}
+
+
+/*
+ * Virtual block IO object (VBIO)
+ *
+ * Linux block IO (BIO) objects have a limit on how many data segments (pages)
+ * they can hold. Depending on how they're allocated and structured, a large
+ * ZIO can require more than one BIO to be submitted to the kernel, which then
+ * all have to complete before we can return the completed ZIO back to ZFS.
+ *
+ * A VBIO is a wrapper around multiple BIOs, carrying everything needed to
+ * translate a ZIO down into the kernel block layer and back again.
+ *
+ * Note that these are only used for data ZIOs (read/write). Meta-operations
+ * (flush/trim) don't need multiple BIOs and so can just make the call
+ * directly.
+ */
+typedef struct {
+	zio_t		*vbio_zio;	/* parent zio */
+
+	struct block_device *vbio_bdev;	/* blockdev to submit bios to */
+
+	abd_t		*vbio_abd;	/* abd carrying borrowed linear buf */
+
+	atomic_t	vbio_ref;	/* bio refcount */
+	int		vbio_error;	/* error from failed bio */
+
+	uint_t		vbio_max_segs;	/* max segs per bio */
+
+	uint_t		vbio_max_bytes;	/* max bytes per bio */
+	uint_t		vbio_lbs_mask;	/* logical block size mask */
+
+	uint64_t	vbio_offset;	/* start offset of next bio */
+
+	struct bio	*vbio_bio;	/* pointer to the current bio */
+	struct bio	*vbio_bios;	/* list of all bios */
+} vbio_t;
+
+static vbio_t *
+vbio_alloc(zio_t *zio, struct block_device *bdev)
+{
+	vbio_t *vbio = kmem_zalloc(sizeof (vbio_t), KM_SLEEP);
+
+	vbio->vbio_zio = zio;
+	vbio->vbio_bdev = bdev;
+	atomic_set(&vbio->vbio_ref, 0);
+	vbio->vbio_max_segs = vdev_bio_max_segs(bdev);
+	vbio->vbio_max_bytes = vdev_bio_max_bytes(bdev);
+	vbio->vbio_lbs_mask = ~(bdev_logical_block_size(bdev)-1);
+	vbio->vbio_offset = zio->io_offset;
+
+	return (vbio);
+}
+
+static int
+vbio_add_page(vbio_t *vbio, struct page *page, uint_t size, uint_t offset)
+{
+	struct bio *bio;
+	uint_t ssize;
+
+	while (size > 0) {
+		bio = vbio->vbio_bio;
+		if (bio == NULL) {
+			/* New BIO, allocate and set up */
+			bio = vdev_bio_alloc(vbio->vbio_bdev, GFP_NOIO,
+			    vbio->vbio_max_segs);
+			if (unlikely(bio == NULL))
+				return (SET_ERROR(ENOMEM));
+			BIO_BI_SECTOR(bio) = vbio->vbio_offset >> 9;
+
+			bio->bi_next = vbio->vbio_bios;
+			vbio->vbio_bios = vbio->vbio_bio = bio;
+		}
+
+		/*
+		 * Only load as much of the current page data as will fit in
+		 * the space left in the BIO, respecting lbs alignment. Older
+		 * kernels will error if we try to overfill the BIO, while
+		 * newer ones will accept it and split the BIO. This ensures
+		 * everything works on older kernels, and avoids an additional
+		 * overhead on the new.
+		 */
+		ssize = MIN(size, (vbio->vbio_max_bytes - BIO_BI_SIZE(bio)) &
+		    vbio->vbio_lbs_mask);
+		if (ssize > 0 &&
+		    bio_add_page(bio, page, ssize, offset) == ssize) {
+			/* Accepted, adjust and load any remaining. */
+			size -= ssize;
+			offset += ssize;
+			continue;
+		}
+
+		/* No room, set up for a new BIO and loop */
+		vbio->vbio_offset += BIO_BI_SIZE(bio);
+
+		/* Signal new BIO allocation wanted */
+		vbio->vbio_bio = NULL;
+	}
+
+	return (0);
+}
+
+BIO_END_IO_PROTO(vdev_disk_io_rw_completion, bio, error);
+static void vbio_put(vbio_t *vbio);
+
+static void
+vbio_submit(vbio_t *vbio, int flags)
+{
+	ASSERT(vbio->vbio_bios);
+	struct bio *bio = vbio->vbio_bios;
+	vbio->vbio_bio = vbio->vbio_bios = NULL;
+
+	/*
+	 * We take a reference for each BIO as we submit it, plus one to
+	 * protect us from BIOs completing before we're done submitting them
+	 * all, causing vbio_put() to free vbio out from under us and/or the
+	 * zio to be returned before all its IO has completed.
+	 */
+	atomic_set(&vbio->vbio_ref, 1);
+
+	/*
+	 * If we're submitting more than one BIO, inform the block layer so
+	 * it can batch them if it wants.
+	 */
+	struct blk_plug plug;
+	boolean_t do_plug = (bio->bi_next != NULL);
+	if (do_plug)
+		blk_start_plug(&plug);
+
+	/* Submit all the BIOs */
+	while (bio != NULL) {
+		atomic_inc(&vbio->vbio_ref);
+
+		struct bio *next = bio->bi_next;
+		bio->bi_next = NULL;
+
+		bio->bi_end_io = vdev_disk_io_rw_completion;
+		bio->bi_private = vbio;
+		bio_set_op_attrs(bio,
+		    vbio->vbio_zio->io_type == ZIO_TYPE_WRITE ?
+		    WRITE : READ, flags);
+
+		vdev_submit_bio(bio);
+
+		bio = next;
+	}
+
+	/* Finish the batch */
+	if (do_plug)
+		blk_finish_plug(&plug);
+
+	/* Release the extra reference */
+	vbio_put(vbio);
+}
+
+static void
+vbio_return_abd(vbio_t *vbio)
+{
+	zio_t *zio = vbio->vbio_zio;
+	if (vbio->vbio_abd == NULL)
+		return;
+
+	/*
+	 * If we copied the ABD before issuing it, clean up and return the copy
+	 * to the ADB, with changes if appropriate.
+	 */
+	void *buf = abd_to_buf(vbio->vbio_abd);
+	abd_free(vbio->vbio_abd);
+	vbio->vbio_abd = NULL;
+
+	if (zio->io_type == ZIO_TYPE_READ)
+		abd_return_buf_copy(zio->io_abd, buf, zio->io_size);
+	else
+		abd_return_buf(zio->io_abd, buf, zio->io_size);
+}
+
+static void
+vbio_free(vbio_t *vbio)
+{
+	VERIFY0(atomic_read(&vbio->vbio_ref));
+
+	vbio_return_abd(vbio);
+
+	kmem_free(vbio, sizeof (vbio_t));
+}
+
+static void
+vbio_put(vbio_t *vbio)
+{
+	if (atomic_dec_return(&vbio->vbio_ref) > 0)
+		return;
+
+	/*
+	 * This was the last reference, so the entire IO is completed. Clean
+	 * up and submit it for processing.
+	 */
+
+	/*
+	 * Get any data buf back to the original ABD, if necessary. We do this
+	 * now so we can get the ZIO into the pipeline as quickly as possible,
+	 * and then do the remaining cleanup after.
+	 */
+	vbio_return_abd(vbio);
+
+	zio_t *zio = vbio->vbio_zio;
+
+	/*
+	 * Set the overall error. If multiple BIOs returned an error, only the
+	 * first will be taken; the others are dropped (see
+	 * vdev_disk_io_rw_completion()). Its pretty much impossible for
+	 * multiple IOs to the same device to fail with different errors, so
+	 * there's no real risk.
+	 */
+	zio->io_error = vbio->vbio_error;
+	if (zio->io_error)
+		vdev_disk_error(zio);
+
+	/* All done, submit for processing */
+	zio_delay_interrupt(zio);
+
+	/* Finish cleanup */
+	vbio_free(vbio);
+}
+
+BIO_END_IO_PROTO(vdev_disk_io_rw_completion, bio, error)
+{
+	vbio_t *vbio = bio->bi_private;
+
+	if (vbio->vbio_error == 0) {
+#ifdef HAVE_1ARG_BIO_END_IO_T
+		vbio->vbio_error = BIO_END_IO_ERROR(bio);
+#else
+		if (error)
+			vbio->vbio_error = -(error);
+		else if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
+			vbio->vbio_error = EIO;
+#endif
+	}
+
+	/*
+	 * Destroy the BIO. This is safe to do; the vbio owns its data and the
+	 * kernel won't touch it again after the completion function runs.
+	 */
+	bio_put(bio);
+
+	/* Drop this BIOs reference acquired by vbio_submit() */
+	vbio_put(vbio);
+}
+
+/*
+ * Iterator callback to count ABD pages and check their size & alignment.
+ *
+ * On Linux, each BIO segment can take a page pointer, and an offset+length of
+ * the data within that page. A page can be arbitrarily large ("compound"
+ * pages) but we still have to ensure the data portion is correctly sized and
+ * aligned to the logical block size, to ensure that if the kernel wants to
+ * split the BIO, the two halves will still be properly aligned.
+ */
+typedef struct {
+	uint_t  bmask;
+	uint_t  npages;
+	uint_t  end;
+} vdev_disk_check_pages_t;
+
+static int
+vdev_disk_check_pages_cb(struct page *page, size_t off, size_t len, void *priv)
+{
+	vdev_disk_check_pages_t *s = priv;
+
+	/*
+	 * If we didn't finish on a block size boundary last time, then there
+	 * would be a gap if we tried to use this ABD as-is, so abort.
+	 */
+	if (s->end != 0)
+		return (1);
+
+	/*
+	 * Note if we're taking less than a full block, so we can check it
+	 * above on the next call.
+	 */
+	s->end = len & s->bmask;
+
+	/* All blocks after the first must start on a block size boundary. */
+	if (s->npages != 0 && (off & s->bmask) != 0)
+		return (1);
+
+	s->npages++;
+	return (0);
+}
+
+/*
+ * Check if we can submit the pages in this ABD to the kernel as-is. Returns
+ * the number of pages, or 0 if it can't be submitted like this.
+ */
+static boolean_t
+vdev_disk_check_pages(abd_t *abd, uint64_t size, struct block_device *bdev)
+{
+	vdev_disk_check_pages_t s = {
+	    .bmask = bdev_logical_block_size(bdev)-1,
+	    .npages = 0,
+	    .end = 0,
+	};
+
+	if (abd_iterate_page_func(abd, 0, size, vdev_disk_check_pages_cb, &s))
+		return (B_FALSE);
+
+	return (B_TRUE);
+}
+
+/* Iterator callback to submit ABD pages to the vbio. */
+static int
+vdev_disk_fill_vbio_cb(struct page *page, size_t off, size_t len, void *priv)
+{
+	vbio_t *vbio = priv;
+	return (vbio_add_page(vbio, page, len, off));
+}
+
+static int
+vdev_disk_io_rw(zio_t *zio)
+{
+	vdev_t *v = zio->io_vd;
+	vdev_disk_t *vd = v->vdev_tsd;
+	struct block_device *bdev = BDH_BDEV(vd->vd_bdh);
+	int flags = 0;
+
+	/*
+	 * Accessing outside the block device is never allowed.
+	 */
+	if (zio->io_offset + zio->io_size > bdev->bd_inode->i_size) {
+		vdev_dbgmsg(zio->io_vd,
+		    "Illegal access %llu size %llu, device size %llu",
+		    (u_longlong_t)zio->io_offset,
+		    (u_longlong_t)zio->io_size,
+		    (u_longlong_t)i_size_read(bdev->bd_inode));
+		return (SET_ERROR(EIO));
+	}
+
+	if (!(zio->io_flags & (ZIO_FLAG_IO_RETRY | ZIO_FLAG_TRYHARD)) &&
+	    v->vdev_failfast == B_TRUE) {
+		bio_set_flags_failfast(bdev, &flags, zfs_vdev_failfast_mask & 1,
+		    zfs_vdev_failfast_mask & 2, zfs_vdev_failfast_mask & 4);
+	}
+
+	/*
+	 * Check alignment of the incoming ABD. If any part of it would require
+	 * submitting a page that is not aligned to the logical block size,
+	 * then we take a copy into a linear buffer and submit that instead.
+	 * This should be impossible on a 512b LBS, and fairly rare on 4K,
+	 * usually requiring abnormally-small data blocks (eg gang blocks)
+	 * mixed into the same ABD as larger ones (eg aggregated).
+	 */
+	abd_t *abd = zio->io_abd;
+	if (!vdev_disk_check_pages(abd, zio->io_size, bdev)) {
+		void *buf;
+		if (zio->io_type == ZIO_TYPE_READ)
+			buf = abd_borrow_buf(zio->io_abd, zio->io_size);
+		else
+			buf = abd_borrow_buf_copy(zio->io_abd, zio->io_size);
+
+		/*
+		 * Wrap the copy in an abd_t, so we can use the same iterators
+		 * to count and fill the vbio later.
+		 */
+		abd = abd_get_from_buf(buf, zio->io_size);
+
+		/*
+		 * False here would mean the borrowed copy has an invalid
+		 * alignment too, which would mean we've somehow been passed a
+		 * linear ABD with an interior page that has a non-zero offset
+		 * or a size not a multiple of PAGE_SIZE. This is not possible.
+		 * It would mean either zio_buf_alloc() or its underlying
+		 * allocators have done something extremely strange, or our
+		 * math in vdev_disk_check_pages() is wrong. In either case,
+		 * something in seriously wrong and its not safe to continue.
+		 */
+		VERIFY(vdev_disk_check_pages(abd, zio->io_size, bdev));
+	}
+
+	/* Allocate vbio, with a pointer to the borrowed ABD if necessary */
+	int error = 0;
+	vbio_t *vbio = vbio_alloc(zio, bdev);
+	if (abd != zio->io_abd)
+		vbio->vbio_abd = abd;
+
+	/* Fill it with pages */
+	error = abd_iterate_page_func(abd, 0, zio->io_size,
+	    vdev_disk_fill_vbio_cb, vbio);
+	if (error != 0) {
+		vbio_free(vbio);
+		return (error);
+	}
+
+	vbio_submit(vbio, flags);
+	return (0);
+}
+
 /* ========== */
 
 /*
- * This is the classic, battle-tested BIO submission code.
+ * This is the classic, battle-tested BIO submission code. Until we're totally
+ * sure that the new code is safe and correct in all cases, this will remain
+ * available and can be enabled by setting zfs_vdev_disk_classic=1 at module
+ * load time.
  *
  * These functions have been renamed to vdev_classic_* to make it clear what
  * they belong to, but their implementations are unchanged.
@@ -1116,7 +1547,8 @@ vdev_disk_init(spa_t *spa, nvlist_t *nv, void **tsd)
 	(void) tsd;
 
 	if (vdev_disk_io_rw_fn == NULL)
-		vdev_disk_io_rw_fn = vdev_classic_physio;
+		/* XXX make configurable */
+		vdev_disk_io_rw_fn = 0 ? vdev_classic_physio : vdev_disk_io_rw;
 
 	return (0);
 }
@@ -1215,3 +1647,6 @@ ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, open_timeout_ms, UINT, ZMOD_RW,
 
 ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, failfast_mask, UINT, ZMOD_RW,
 	"Defines failfast mask: 1 - device, 2 - transport, 4 - driver");
+
+ZFS_MODULE_PARAM(zfs_vdev_disk, zfs_vdev_disk_, max_segs, UINT, ZMOD_RW,
+	"Maximum number of data segments to add to an IO request (min 4)");