vendor/device-tree/ian-c8c1b3a7

1 files changed, 6 insertions, 4 deletions

diff --git a/Bindings/clock/nvidia,tegra124-car.txt b/Bindings/clock/nvidia,tegra124-car.txt
index ded5d6212c84..c6620bc96703 100644
--- a/Bindings/clock/nvidia,tegra124-car.txt
+++ b/Bindings/clock/nvidia,tegra124-car.txt
@@ -1,4 +1,4 @@
-NVIDIA Tegra124 Clock And Reset Controller
+NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
 
 This binding uses the common clock binding:
 Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
 for muxing and gating Tegra's clocks, and setting their rates.
 
 Required properties :
-- compatible : Should be "nvidia,tegra124-car"
+- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
 - reg : Should contain CAR registers location and length
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
   In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra124-car.h>.
+  CAR. The assignments may be found in the header files
+  <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
+  to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
+  (for Tegra124-specific clocks).
 - #reset-cells : Should be 1.
   In clock consumers, this cell represents the bit number in the CAR's
   array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.