vendor/device-tree/5.5

3 files changed, 86 insertions, 47 deletions

diff --git a/Bindings/mailbox/fsl,mu.txt b/Bindings/mailbox/fsl,mu.txt
index f3cf77eb5ab4..9c43357c5924 100644
--- a/Bindings/mailbox/fsl,mu.txt
+++ b/Bindings/mailbox/fsl,mu.txt
@@ -21,6 +21,8 @@ Required properties:
 		imx6sx, imx7s, imx8qxp, imx8qm.
 		The "fsl,imx6sx-mu" compatible is seen as generic and should
 		be included together with SoC specific compatible.
+		There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu"
+		compatible to support it.
 - reg :		Should contain the registers location and length
 - interrupts :	Interrupt number. The interrupt specifier format depends
 		on the interrupt controller parent.
diff --git a/Bindings/mailbox/st,stm32-ipcc.yaml b/Bindings/mailbox/st,stm32-ipcc.yaml
new file mode 100644
index 000000000000..5b13d6672996
--- /dev/null
+++ b/Bindings/mailbox/st,stm32-ipcc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 IPC controller bindings
+
+description:
+  The IPCC block provides a non blocking signaling mechanism to post and
+  retrieve messages in an atomic way between two processors.
+  It provides the signaling for N bidirectionnal channels. The number of
+  channels (N) can be read from a dedicated register.
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-ipcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+     maxItems: 1
+
+  interrupts:
+    items:
+      - description: rx channel occupied
+      - description: tx channel free
+      - description: wakeup source
+    minItems: 2
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+      - const: wakeup
+    minItems: 2
+    maxItems: 3
+
+  wakeup-source: true
+
+  "#mbox-cells":
+    const: 1
+
+  st,proc-id:
+    description: Processor id using the mailbox (0 or 1)
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 0, 1 ]
+
+required:
+  - compatible
+  - reg
+  - st,proc-id
+  - clocks
+  - interrupt-names
+  - "#mbox-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    ipcc: mailbox@4c001000 {
+      compatible = "st,stm32mp1-ipcc";
+      #mbox-cells = <1>;
+      reg = <0x4c001000 0x400>;
+      st,proc-id = <0>;
+      interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
+      		      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
+      		      <&aiec 62 1>;
+      interrupt-names = "rx", "tx", "wakeup";
+      clocks = <&rcc_clk IPCC>;
+      wakeup-source;
+    };
+
+...
diff --git a/Bindings/mailbox/stm32-ipcc.txt b/Bindings/mailbox/stm32-ipcc.txt
deleted file mode 100644
index 1d2b7fee7b85..000000000000
--- a/Bindings/mailbox/stm32-ipcc.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* STMicroelectronics STM32 IPCC (Inter-Processor Communication Controller)
-
-The IPCC block provides a non blocking signaling mechanism to post and
-retrieve messages in an atomic way between two processors.
-It provides the signaling for N bidirectionnal channels. The number of channels
-(N) can be read from a dedicated register.
-
-Required properties:
-- compatible:   Must be "st,stm32mp1-ipcc"
-- reg:          Register address range (base address and length)
-- st,proc-id:   Processor id using the mailbox (0 or 1)
-- clocks:       Input clock
-- interrupt-names: List of names for the interrupts described by the interrupt
-                   property. Must contain the following entries:
-                   - "rx"
-                   - "tx"
-                   - "wakeup"
-- interrupts:   Interrupt specifiers for "rx channel occupied", "tx channel
-                free" and "system wakeup".
-- #mbox-cells:  Number of cells required for the mailbox specifier. Must be 1.
-                The data contained in the mbox specifier of the "mboxes"
-                property in the client node is the mailbox channel index.
-
-Optional properties:
-- wakeup-source: Flag to indicate whether this device can wake up the system
-
-
-
-Example:
-	ipcc: mailbox@4c001000 {
-		compatible = "st,stm32mp1-ipcc";
-		#mbox-cells = <1>;
-		reg = <0x4c001000 0x400>;
-		st,proc-id = <0>;
-		interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-				      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-				      <&aiec 62 1>;
-		interrupt-names = "rx", "tx", "wakeup";
-		clocks = <&rcc_clk IPCC>;
-		wakeup-source;
-	}
-
-Client:
-	mbox_test {
-		...
-		mboxes = <&ipcc 0>, <&ipcc 1>;
-	};