9 files changed, 0 insertions, 760 deletions

diff --git a/gnu/libexec/uucp/common_sources/conf.h b/gnu/libexec/uucp/common_sources/conf.h
deleted file mode 100644
index 9053c4423e0a..000000000000
--- a/gnu/libexec/uucp/common_sources/conf.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/* conf.h.  Generated automatically by configure.  */
-/* Configuration header file for Taylor UUCP.  -*- C -*-  */
-
-/* Set MAIL_PROGRAM to a program which takes a mail address as an
-   argument and accepts a mail message to send to that address on
-   stdin (e.g. "/bin/mail").  */
-#define MAIL_PROGRAM "/usr/bin/mail"
-
-/* Set ECHO_PROGRAM to a program which echoes its arguments; if echo
-   is a shell builtin you can just use "echo".  */
-#define ECHO_PROGRAM "echo"
-
-/* The following macros indicate what header files you have.  Set the
-   macro to 1 if you have the corresponding header file, or 0 if you
-   do not.  */
-#define HAVE_STDDEF_H 1 /* <stddef.h> */
-#define HAVE_STRING_H 1 /* <string.h> */
-#define HAVE_STRINGS_H 1 /* <strings.h> */
-#define HAVE_UNISTD_H 1 /* <unistd.h> */
-#define HAVE_STDLIB_H 1 /* <stdlib.h> */
-#define HAVE_LIMITS_H 1 /* <limits.h> */
-#define HAVE_TIME_H 1 /* <time.h> */
-#define HAVE_SYS_WAIT_H 1 /* <sys/wait.h> */
-#define HAVE_SYS_IOCTL_H 1 /* <sys/ioctl.h> */
-#define HAVE_DIRENT_H 1 /* <dirent.h> */
-#define HAVE_MEMORY_H 1 /* <memory.h> */
-#define HAVE_SYS_PARAM_H 1 /* <sys/param.h> */
-#define HAVE_UTIME_H 1 /* <utime.h> */
-#define HAVE_FCNTL_H 1 /* <fcntl.h> */
-#define HAVE_SYS_FILE_H 1 /* <sys/file.h> */
-#define HAVE_SYS_TIMES_H 1 /* <sys/times.h> */
-#define HAVE_LIBC_H 0 /* <libc.h> */
-#define HAVE_SYSEXITS_H 1 /* <sysexits.h> */
-#define HAVE_POLL_H 0 /* <poll.h> */
-#define HAVE_TIUSER_H 0 /* <tiuser.h> */
-#define HAVE_XTI_H 0 /* <xti.h> */
-#define HAVE_SYS_TLI_H 0 /* <sys/tli.h> */
-#define HAVE_STROPTS_H 0 /* <stropts.h> */
-#define HAVE_FTW_H 0 /* <ftw.h> */
-#define HAVE_GLOB_H 1 /* <glob.h> */
-#define HAVE_SYS_SELECT_H 0 /* <sys/select.h> */
-#define HAVE_SYS_TYPES_TCP_H 0 /* <sys/types.tcp.h> */
-
-/* If major and minor are not defined in <sys/types.h>, but are in
-   <sys/mkdev.h>, set MAJOR_IN_MKDEV to 1.  If they are in
-   <sys/sysmacros.h>, set MAJOR_IN_SYSMACROS to 1.  */
-#define MAJOR_IN_MKDEV 0
-#define MAJOR_IN_SYSMACROS 0
-
-/* If the macro offsetof is not defined in <stddef.h>, you may give it
-   a definition here.  If you do not, the code will use a definition
-   (in uucp.h) that should be fairly portable.  */
-/* #define offsetof */
-
-/* Set RETSIGTYPE to the return type of a signal handler.  On newer
-   systems this will be void; some older systems use int.  */
-#define RETSIGTYPE void
-
-/* Set HAVE_SYS_TIME_AND_TIME_H to 1 if <time.h> and <sys/time.h> can both
-   be included in a single source file; if you don't have either or both of
-   them, it doesn't matter what you set this to.  */
-#define HAVE_SYS_TIME_AND_TIME_H 1
-
-/* Set HAVE_TERMIOS_AND_SYS_IOCTL_H to 1 if <termios.h> and <sys/ioctl.h>
-   can both be included in a single source file; if you don't have either
-   or both of them, it doesn't matter what you set this to.  */
-#define HAVE_TERMIOS_AND_SYS_IOCTL_H 1
-
-/* If you are configuring by hand, you should set one of the terminal
-   driver options in policy.h.  If you are autoconfiguring, the script
-   will check whether your system defines CBREAK, which is a terminal
-   setting; if your system supports CBREAK, and you don't set a terminal
-   driver in policy.h, the code will assume that you have a BSD style
-   terminal driver.  */
-#define HAVE_CBREAK 1
-
-/* The package needs several standard types.  If you are using the
-   configure script, it will look in standard places for these types,
-   and give default definitions for them here if it doesn't find them.
-   The default definitions should work on most systems, but you may
-   want to check them.  If you are configuring by hand, you will have
-   to figure out whether the types are defined on your system, and
-   what they should be defined to.
-
-   Any type that is not defined on your system should get a macro
-   definition.  The definition should be of the name of the type in
-   all capital letters.  For example, #define PID_T int.  If the type
-   is defined in a standard header file, the macro name should not be
-   defined.  */
-
-/* The type pid_t is used to hold a process ID number.  It is normally
-   defined in <sys/types.h>.  This is the type returned by the
-   functions fork or getpid.  Usually int will work fine.  */
-#undef PID_T
-
-/* The type uid_t is used to hold a user ID number.  It is normally
-   defined in <sys/types.h>.  This is the type returned by the getuid
-   function.  Usually int will work fine.  */
-#undef UID_T
-
-/* The type gid_t is used to hold a group ID number.  It is sometimes
-   defined in <sys/types.h>.  This is the type returned by the getgid
-   function.  Usually int will work fine.  */
-#undef GID_T
-
-/* The type off_t is used to hold an offset in a file.  It is sometimes
-   defined in <sys/types.h>.  This is the type of the second argument to
-   the lseek function.  Usually long will work fine.  */
-#undef OFF_T
-
-/* Set HAVE_SIG_ATOMIC_T_IN_SIGNAL_H if the type sig_atomic_t is defined
-   in <signal.h> as required by ANSI C.  */
-#define HAVE_SIG_ATOMIC_T_IN_SIGNAL_H 0
-
-/* Set HAVE_SIG_ATOMIC_T_IN_TYPES_H if the type sig_atomic_t is defined
-   in <sys/types.h>.  This is ignored if HAVE_SIG_ATOMIC_T_IN_SIGNAL_H is
-   set to 1.  */
-#define HAVE_SIG_ATOMIC_T_IN_TYPES_H 0
-
-/* The type sig_atomic_t is used to hold a value which may be
-   referenced in a single atomic operation.  If it is not defined in
-   either <signal.h> or <sys/types.h>, you may want to give it a
-   definition here.  If you don't, the code will use char.  If your
-   compiler does not support sig_atomic_t, there is no type which is
-   really correct; fortunately, for this package it does not really
-   matter very much.  */
-#undef SIG_ATOMIC_T
-
-/* Set HAVE_SIZE_T_IN_STDDEF_H to 1 if the type size_t is defined in
-   <stddef.h> as required by ANSI C.  */
-#define HAVE_SIZE_T_IN_STDDEF_H 1
-
-/* Set HAVE_SIZE_T_IN_TYPES_H to 1 if the type size_t is defined in
-   <sys/types.h>.  This is ignored if HAVE_SIZE_T_IN_STDDEF_H is set
-   to 1.  */
-#define HAVE_SIZE_T_IN_TYPES_H 1
-
-/* The type size_t is used to hold the size of an object.  In
-   particular, an argument of this type is passed as the size argument
-   to the malloc and realloc functions.  If size_t is not defined in
-   either <stddef.h> or <sys/types.h>, you may want to give it a
-   definition here.  If you don't, the code will use unsigned.  */
-#undef SIZE_T
-
-/* Set HAVE_TIME_T_IN_TIME_H to 1 if the type time_t is defined in
-   <time.h>, as required by the ANSI C standard.  */
-#define HAVE_TIME_T_IN_TIME_H 1
-
-/* Set HAVE_TIME_T_IN_TYPES_H to 1 if the type time_t is defined in
-   <sys/types.h>.  This is ignored if HAVE_TIME_T_IN_TIME_H is set to
-   1.  */
-#define HAVE_TIME_T_IN_TYPES_H 1
-
-/* When Taylor UUCP is talking to another instance of itself, it will
-   tell the other side the size of a file before it is transferred.
-   If the package can determine how much disk space is available, it
-   will use this information to avoid filling up the disk.  Define one
-   of the following macros to tell the code how to determine the
-   amount of available disk space.  It is possible that none of these
-   are appropriate; it will do no harm to use none of them, but, of
-   course, nothing will then prevent the package from filling up the
-   disk.  Note that this space check is only useful when talking to
-   another instance of Taylor UUCP.
-
-   STAT_STATVFS          statvfs function
-   STAT_STATFS2_BSIZE    two argument statfs function with f_bsize field
-   STAT_STATFS2_FSIZE    two argument statfs function with f_fsize field
-   STAT_STATFS2_FS_DATA  two argument statfs function with fd_req field
-   STAT_STATFS4          four argument statfs function
-   STAT_USTAT            the ustat function with 512 byte blocks.  */
-#define STAT_STATVFS 0
-#define STAT_STATFS2_BSIZE 0
-#define STAT_STATFS2_FSIZE 1
-#define STAT_STATFS2_FS_DATA 0
-#define STAT_STATFS4 0
-#define STAT_USTAT 0
-
-/* Set HAVE_VOID to 1 if the compiler supports declaring functions with
-   a return type of void and casting values to void.  */
-#define HAVE_VOID 1
-
-/* Set HAVE_UNSIGNED_CHAR to 1 if the compiler supports the type unsigned
-   char.  */
-#define HAVE_UNSIGNED_CHAR 1
-
-/* Set HAVE_ERRNO_DECLARATION to 1 if errno is declared in <errno.h>.  */
-#define HAVE_ERRNO_DECLARATION 1
-
-/* There are now a number of functions to check for.  For each of
-   these, the macro HAVE_FUNC should be set to 1 if your system has
-   FUNC.  For example, HAVE_VFPRINTF should be set to 1 if your system
-   has vfprintf, 0 otherwise.  */
-
-/* Taylor UUCP will take advantage of the following functions if they
-   are available, but knows how to deal with their absence.  */
-#define HAVE_VFPRINTF 1
-#define HAVE_FTRUNCATE 1
-#define HAVE_LTRUNC 0
-#define HAVE_WAITPID 1
-#define HAVE_WAIT4 1
-#define HAVE_GLOB 1
-#define HAVE_SETREUID 1
-
-/* There are several functions which are replaced in the subdirectory
-   lib.  If they are missing, the configure script will automatically
-   add them to lib/Makefile to force them to be recompiled.  If you
-   are configuring by hand, you will have to do this yourself.  The
-   string @LIBOBJS@ in lib/Makefile.in should be replaced by a list of
-   object files in lib/Makefile.  The following comments tell you
-   which object file names to add (they are generally fairly obvious,
-   given that the file names have no more than six characters before
-   the period).  */
-
-/* For each of these functions, if it does not exist, the indicated
-   object file should be added to lib/Makefile.  */
-#define HAVE_BSEARCH 1 /* bsrch.o */
-#define HAVE_GETLINE 0 /* getlin.o */
-#define HAVE_MEMCHR 1 /* memchr.o */
-#define HAVE_STRDUP 1 /* strdup.o */
-#define HAVE_STRSTR 1 /* strstr.o */
-#define HAVE_STRTOL 1 /* strtol.o */
-
-/* If neither of these functions exists, you should add bzero.o to
-   lib/Makefile.  */
-#define HAVE_BZERO 1
-#define HAVE_MEMSET 1
-
-/* If neither of these functions exists, you should add memcmp.o to
-   lib/Makefile.  */
-#define HAVE_MEMCMP 1
-#define HAVE_BCMP 1
-
-/* If neither of these functions exists, you should add memcpy.o to
-   lib/Makefile.  */
-#define HAVE_MEMCPY 1
-#define HAVE_BCOPY 1
-
-/* If neither of these functions exists, you should add strcas.o to
-   lib/Makefile.  */
-#define HAVE_STRCASECMP 1
-#define HAVE_STRICMP 0
-
-/* If neither of these functions exists, you should add strncs.o to
-   lib/Makefile.  */
-#define HAVE_STRNCASECMP 1
-#define HAVE_STRNICMP 0
-
-/* If neither of these functions exists, you should add strchr.o to
-   lib/Makefile.  */
-#define HAVE_STRCHR 1
-#define HAVE_INDEX 1
-
-/* If neither of these functions exists, you should add strrch.o to
-   lib/Makefile.  */
-#define HAVE_STRRCHR 1
-#define HAVE_RINDEX 1
-
-/* There are also Unix specific functions which are replaced in the
-   subdirectory unix.  If they are missing, the configure script will
-   automatically add them to unix/Makefile to force them to be
-   recompiled.  If you are configuring by hand, you will have to do
-   this yourself.  The string @UNIXOBJS@ in unix/Makefile.in should be
-   replaced by a list of object files in unix/Makefile.  The following
-   comments tell you which object file names to add.  */
-
-/* For each of these functions, if it does not exist, the indicated
-   object file should be added to unix/Makefile.  */
-#define HAVE_OPENDIR 1 /* dirent.o */
-#define HAVE_DUP2 1 /* dup2.o */
-#define HAVE_FTW 0 /* ftw.o */
-#define HAVE_REMOVE 1 /* remove.o */
-#define HAVE_RENAME 1 /* rename.o */
-#define HAVE_STRERROR 1 /* strerr.o */
-
-/* The code needs to know how to create directories.  If you have the
-   mkdir function, set HAVE_MKDIR to 1 and replace @UUDIR@ in
-   Makefile.in with '# ' (the configure script will set @UUDIR@
-   according to the variable UUDIR).  Otherwise, set HAVE_MKDIR to 0,
-   remove @UUDIR@ from Makefile.in, set MKDIR_PROGRAM to the name of
-   the program which will create a directory named on the command line
-   (e.g., "/bin/mkdir"), and add mkdir.o to the @UNIXOBJS@ string in
-   unix/Makefile.in.  */
-#define HAVE_MKDIR 1
-#define MKDIR_PROGRAM unused
-
-/* The code also needs to know how to remove directories.  If you have
-   the rmdir function, set HAVE_RMDIR to 1.  Otherwise, set
-   RMDIR_PROGRAM to the name of the program which will remove a
-   directory named on the command line (e.g., "/bin/rmdir") and add
-   rmdir.o to the @UNIXOBJS@ string in unix/Makefile.in.  */
-#define HAVE_RMDIR 1
-#define RMDIR_PROGRAM unused
-
-/* The code needs to know to how to get the name of the current
-   directory.  If getcwd is available it will be used, otherwise if
-   getwd is available it will be used.  Otherwise, set PWD_PROGRAM to
-   the name of the program which will print the name of the current
-   working directory (e.g., "/bin/pwd") and add getcwd.o to the
-   @UNIXOBJS@ string in unix/Makefile.in.  */
-#define HAVE_GETCWD 1
-#define HAVE_GETWD 1
-#define PWD_PROGRAM unused
-
-/* If you have either sigsetjmp or setret, it will be used instead of
-   setjmp.  These functions will only be used if your system restarts
-   system calls after interrupts (see HAVE_RESTARTABLE_SYSCALLS,
-   below).  */
-#define HAVE_SIGSETJMP 0
-#define HAVE_SETRET 0
-
-/* The code needs to know what function to use to set a signal
-   handler.  If will try to use each of the following functions in
-   turn.  If none are available, it will use signal, which is assumed
-   to always exist.  */
-#define HAVE_SIGACTION 1
-#define HAVE_SIGVEC 1
-#define HAVE_SIGSET 0
-
-/* If the code is going to use sigvec (HAVE_SIGACTION is 0 and
-   HAVE_SIGVEC is 1), then HAVE_SIGVEC_SV_FLAGS must be set to 1 if
-   the sigvec structure contains the sv_flags field, or 0 if the
-   sigvec structure contains the sv_onstack field.  If the code is not
-   going to use sigvec, it doesn't matter what this is set to.  */
-#define HAVE_SIGVEC_SV_FLAGS 1
-
-/* The code will try to use each of the following functions in turn
-   when blocking signals from delivery.  If none are available, a
-   relatively unimportant race condition will exist.  */
-#define HAVE_SIGPROCMASK 1
-#define HAVE_SIGBLOCK 1
-#define HAVE_SIGHOLD 0
-
-/* If you have either of the following functions, it will be used to
-   determine the number of file descriptors which may be open.
-   Otherwise, the code will use OPEN_MAX if defined, then NOFILE if
-   defined, then 20.  */
-#define HAVE_GETDTABLESIZE 1
-#define HAVE_SYSCONF 0
-
-/* The code will use one of the following functions when detaching
-   from a terminal.  One of these must exist.  */
-#define HAVE_SETPGRP 0
-#define HAVE_SETSID 1
-
-/* If you do not specify the local node name in the main configuration
-   file, Taylor UUCP will try to use each of the following functions
-   in turn.  If neither is available, you must specify the local node
-   name in the configuration file.  */
-#define HAVE_GETHOSTNAME 1
-#define HAVE_UNAME 0
-
-/* The code will try to use each of the following functions in turn to
-   determine the current time.  If none are available, it will use
-   time, which is assumed to always exist.  */
-#define HAVE_GETTIMEOFDAY 1
-#define HAVE_FTIME 0
-
-/* If neither gettimeofday nor ftime is available, the code will use
-   times (if available) to measure a span of time.  See also the
-   discussion of TIMES_TICK in policy.h.  */
-#define HAVE_TIMES 1
-
-/* When a chat script requests a pause of less than a second with \p,
-   Taylor UUCP will try to use each of the following functions in
-   turn.  If none are available, it will sleep for a full second.
-   Also, the (non-portable) tstuu program requires either select or
-   poll.  */
-#define HAVE_NAPMS 0
-#define HAVE_NAP 0
-#define HAVE_USLEEP 1
-#define HAVE_POLL 0
-#define HAVE_SELECT 1
-
-/* If the getgrent function is available, it will be used to determine
-   all the groups a user belongs to when checking file access
-   permissions.  */
-#define HAVE_GETGRENT 1
-
-/* If the socket function is available, TCP support code will be
-   compiled in.  */
-#define HAVE_SOCKET 1
-
-/* If the t_open function is available, TLI support code will be
-   compiled in.  This may require adding a library, such as -lnsl or
-   -lxti, to the Makefile variables LIBS.  */
-#define HAVE_T_OPEN 0
-
-/* That's the end of the list of the functions.  Now there are a few
-   last miscellaneous items.  */
-
-/* On some systems the following functions are declared in such a way
-   that the code cannot make a simple extern.  On other systems, these
-   functions are not declared at all, and the extern is required.  If
-   a declaration of the function, as shown, compiles on your system,
-   set the value to 1.  Not all functions declared externally are
-   listed here, only the ones with which I have had trouble.  */
-/* extern long times (); */
-#define TIMES_DECLARATION_OK 0
-/* extern struct passwd *getpwnam (); */
-#define GETPWNAM_DECLARATION_OK 1
-/* extern struct passwd *getpwuid (); */
-#define GETPWUID_DECLARATION_OK 0
-/* extern struct group *getgrent (); */
-#define GETGRENT_DECLARATION_OK 1
-
-/* Set HAVE_BSD_PGRP to 1 if your getpgrp call takes 1 argument and
-   your setpgrp calls takes 2 arguments (on System V they generally
-   take no arguments).  You can safely set this to 1 on System V,
-   provided the call will compile without any errors.  */
-#define HAVE_BSD_PGRP 0
-
-/* Set HAVE_UNION_WAIT to 1 if union wait is defined in the header
-   file <sys/wait.h>.  */
-#define HAVE_UNION_WAIT 1
-
-/* Set HAVE_LONG_FILE_NAMES to 1 if the system supports file names
-   longer than 14 characters.  */
-#define HAVE_LONG_FILE_NAMES 1
-
-/* If slow system calls are restarted after interrupts, set
-   HAVE_RESTARTABLE_SYSCALLS to 1.  This is ignored if HAVE_SIGACTION
-   is 1 or if HAVE_SIGVEC is 1 and HAVE_SIGVEC_SV_FLAGS is 1 and
-   SV_INTERRUPT is defined in <signal.h>.  In both of these cases
-   system calls can be prevented from restarting.  */
-#define HAVE_RESTARTABLE_SYSCALLS 1
-
-/* Some systems supposedly need the following macros to be defined.
-   These are handled by the configure script (it will turn #undef into
-   #define when appropriate, which is why the peculiar #ifndef #undef
-   construction is used).  If you are configuring by hand, you may add
-   appropriate definitions here, or just add them to CFLAGS when
-   running make.  */
-#ifndef _ALL_SOURCE
-#undef _ALL_SOURCE
-#endif
-#ifndef _POSIX_SOURCE
-#undef _POSIX_SOURCE
-#endif
-#ifndef _MINIX
-#undef _MINIX
-#endif
-#ifndef _POSIX_1_SOURCE
-#undef _POSIX_1_SOURCE
-#endif
diff --git a/gnu/libexec/uucp/sample/call b/gnu/libexec/uucp/sample/call
deleted file mode 100644
index de4190ce6125..000000000000
--- a/gnu/libexec/uucp/sample/call
+++ /dev/null
@@ -1,20 +0,0 @@
-# This is an example of call, the call out password file for Taylor
-# UUCP.  To use it, you must compile the package with
-# HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default), copy
-# this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# This file is used when the ``call-login'' or ``call-password''
-# commands are used in the sys file with a "*" argument (e.g.,
-# ``call-login *'').  The system name is looked up in this file, and
-# the login name and password are used.
-
-# The point of this is that the sys file may then be publically
-# readable, while still concealing the login names and passwords used
-# to connect to the remote system.
-
-# The format is just system-name login-name password.
-uunet Uairs foobar
diff --git a/gnu/libexec/uucp/sample/config b/gnu/libexec/uucp/sample/config
deleted file mode 100644
index e7d683bb0367..000000000000
--- a/gnu/libexec/uucp/sample/config
+++ /dev/null
@@ -1,88 +0,0 @@
-# This is an example of config, the main configuration file for Taylor
-# UUCP.  To use it, you must compile the package with
-# HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default), copy
-# this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# You need not use this file at all; all the important commands have
-# defaults which will be used if this file can not be found.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# You must choose a UUCP name.  If your system is going to be
-# communicating with other systems outside your organization, the name
-# must be unique in the entire world.  The usual method is to pick a
-# name, and then search the UUCP maps (in the newsgroup
-# comp.mail.maps) to see whether it has already been taken.  See the
-# README posting in comp.mail.maps for more information.  If the name
-# of your system as returned by "uuname -n" or "hostname" is the name
-# you want to use, you do not need to set the name in this file.
-# Otherwise uncomment and edit the following line.
-# nodename uucp				# The UUCP name of this system
-
-# The default spool directory is set in policy.h (the default is
-# /usr/spool/uucp).  All UUCP jobs and status information are kept in
-# the spool directory.  If you wish to change it, use the spool
-# command.
-# spool /usr/spool/uucp			# The UUCP spool directory
-
-# The default public directory is set in policy.h (the default is
-# /usr/spool/uucppublic).  Remote systems may refer to a file in this
-# directory using "~/FILE".  By default, the public directory is the
-# only directory which remote systems may transfer files in and out
-# of.  If you wish to change the public directory, use the pubdir
-# command.
-# pubdir /usr/spool/uucppublic		# The UUCP public directory
-
-# The names of the UUCP log files are set in policy.h.  The default
-# names depend on the logging option you have chosen.  If
-# HAVE_TAYLOR_LOGGING is set in policy.h, the default log file name is
-# /usr/spool/uucp/Log, the default statistics file name is
-# /usr/spool/uucp/Stats, and the default debugging file name is
-# /usr/spool/uucp/Debug.  These file names may be set by the following
-# commands.
-# logfile /usr/spool/uucp/Log		# The UUCP log file
-# statfile /usr/spool/uucp/Stats	# The UUCP statistics file
-# debugfile /usr/spool/uucp/Debug	# The UUCP debugging file
-
-# uuxqt is the program which executes UUCP requests from other
-# systems.  Normally one is started after each run of uucico, the
-# communications daemon.  You may control the maximum number of uuxqt
-# programs run at the same time with the following command.  The
-# default is to have no maximum.
-# max-uuxqts 1				# The maximum number of uuxqts
-
-# There are several files that uucico uses.  By default it looks for
-# them in newconfigdir, as set in Makefile.in.  You may name one or
-# more of each type of file using the following commands.
-# sysfile FILES				# Default "sys"
-# portfile FILES			# Default "port"
-# dialfile FILES			# Default "dial"
-# dialcodefile FILES			# Default "dialcode"
-# callfile FILES			# Default "call"
-# passwdfile FILES			# Default "passwd"
-
-# The ``timetable'' command may be used to declare timetables.  These
-# may then be referred to in time strings in the other files.
-# timetable Day Wk0905-1655
-
-# The ``unknown'' command is followed by any command which may appear
-# in a sys file.  These commands are taken together to describe what
-# is permitted to a system which is not listed in any sys file.  If
-# the ``unknown'' command, then unknown systems are not permitted to
-# connect.
-
-# Here is an example which permits unknown systems to download files
-# from /usr/spool/anonymous, and to upload them to
-# /usr/spool/anonymous/upload.
-#
-# No commands may be executed (the list of permitted commands is empty)
-# unknown commands
-# The public directory is /usr/spool/anonymous
-# unknown pubdir /usr/spool/anonymous
-# Only files in the public directory may be sent; users may not download
-# files from the upload directory
-# unknown remote-send ~ !~/upload
-# May only upload files into /usr/spool/anonymous/upload
-# unknown remote-receive ~/upload
diff --git a/gnu/libexec/uucp/sample/dial b/gnu/libexec/uucp/sample/dial
deleted file mode 100644
index f0d4bdd8aa54..000000000000
--- a/gnu/libexec/uucp/sample/dial
+++ /dev/null
@@ -1,35 +0,0 @@
-# This is an example of dial, the dialer configuration file for Taylor
-# UUCP.  To use it, you must compile the package with
-# HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default), copy
-# this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# All dialers named in the port (or sys) file must be described in the
-# dial file.  It is also possible to describe a dialer directly in the
-# port (or sys) file.
-
-# This is a typical Hayes modem definition.
-dialer hayes
-
-# The chat script used to dial the phone.
-# This means:
-#  1) expect nothing (i.e., continue with step 2)
-#  2) send "ATZ", then a carriage return, then sleep for 1 to 2
-#     seconds.  The \c means to not send a final carriage return.
-#  3) wait until the modem echoes "OK"
-#  4) send "ATDT", then the telephone number (after translating any
-#     dialcodes).
-#  5) wait until the modem echoes "CONNECT"
-chat "" ATZ\r\d\c OK ATDT\T CONNECT
-
-# If we get "BUSY" or "NO CARRIER" during the dial chat script we
-# abort the dial immediately.
-chat-fail BUSY
-chat-fail NO\sCARRIER
-
-# When the call is over, we make sure we hangup the modem.
-complete \d\d+++\d\dATH\r\c
-abort \d\d+++\d\dATH\r\c
diff --git a/gnu/libexec/uucp/sample/dialcode b/gnu/libexec/uucp/sample/dialcode
deleted file mode 100644
index 710a07bf7343..000000000000
--- a/gnu/libexec/uucp/sample/dialcode
+++ /dev/null
@@ -1,19 +0,0 @@
-# This is an example of dialcode, the dialcode configuration file for
-# Taylor UUCP.  To use it, you must compile the package with
-# HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default), copy
-# this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# The dialcode file is used if \T is used in the dialer chat script
-# and the telephone number begins with alphabetic characters.  The
-# alphabetic characters are looked up and translated in dialcode.
-
-# Here are a couple of sample dialcodes.
-MA 617
-CA 415
-
-# For example, if the phone number (from the sys file) is MA7389449,
-# then the string sent to the modem will be 6177389449.
diff --git a/gnu/libexec/uucp/sample/passwd b/gnu/libexec/uucp/sample/passwd
deleted file mode 100644
index 2b04e13a3435..000000000000
--- a/gnu/libexec/uucp/sample/passwd
+++ /dev/null
@@ -1,18 +0,0 @@
-# This is an example of passwd, the call in password file for Taylor
-# UUCP.  To use it, you must compile the package with
-# HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default), copy
-# this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# This file is used when uucico is invoked with the -l or -e argument.
-# uucico will then prompt for a login name and password.  The login
-# name is looked up in this file to check the password (the system
-# password file, /etc/passwd, is not checked).  This permits uucico to
-# completely take over a port, allowing UUCP access to remote systems
-# but not permitting remote users to actually log in to the system.
-
-# The format is just login-name password.
-Uairs foobar
diff --git a/gnu/libexec/uucp/sample/port b/gnu/libexec/uucp/sample/port
deleted file mode 100644
index 8e481869b568..000000000000
--- a/gnu/libexec/uucp/sample/port
+++ /dev/null
@@ -1,41 +0,0 @@
-# This is an example of port, the port configuration file for Taylor
-# UUCP.  To use it, you must compile the package with
-# HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default), copy
-# this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# All ports named in the sys file must be described in a port file.
-# It is also possible to describe the port directly in the sys file.
-
-# Commands that appears before the first ``port'' command are defaults
-# for all ports that appear later in the file.  In this case all ports
-# will default to being modems (other possible types are direct, tcp
-# and tli).
-type modem
-
-# Now we describe two ports.
-
-# This is the name of the port.  This name may be used in the sys file
-# to select the port, or the sys file may just specify a baud rate in
-# which case the first matching unlocked port will be used.
-port port1
-
-# This is the device name to open to dial out.
-device /dev/ttyd0
-
-# This is the dialer to use, as described in the dialer file.
-dialer hayes
-
-# This is the baud rate to dial out at.
-speed 2400
-
-# Here is a second port.  This is like the first, except that it uses
-# a different device.  It also permits a range of speeds, which is
-# mainly useful if the system specifies a particular baud rate.
-port port2
-device /dev/ttyd1
-dialer hayes
-speed-range 2400 9600
diff --git a/gnu/libexec/uucp/sample/sys1 b/gnu/libexec/uucp/sample/sys1
deleted file mode 100644
index fa9e7709e1cf..000000000000
--- a/gnu/libexec/uucp/sample/sys1
+++ /dev/null
@@ -1,44 +0,0 @@
-# This is an example of a sys file, the file(s) which describe remote
-# systems for Taylor UUCP.  To use it, you must compile the package
-# with HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default),
-# copy this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# If you do not use the ``unknown'' command in the config file, then
-# each system that you communicate with must be listed in a sys file.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# This is a sample sys file that might be used in a leaf system.  A
-# leaf system is one that only contacts one other system.  sys2
-# provides another example.
-
-# The name of the remote system that we call.
-system uunet
-
-# The login name and password are kept in the callout password file
-# (by default this is the file "call" in newconfigdir).
-call-login *
-call-password *
-
-# We can send anything at any time.
-time any
-
-# During the day we only accept grade 'Z' or above; at other times
-# (not mentioned here) we accept all grades.  uunet queues up news
-# at grade 'd', which is lower than 'Z'.
-call-timegrade Z Wk0755-2305,Su1655-2305
-
-# The phone number to call.
-phone 7389449
-
-# uunet tends to be slow, so we increase the timeout
-chat-timeout 120
-
-# The port we use to dial out.
-port serial
-
-# Increase the timeout and the number of retries.
-protocol-parameter g timeout 20
-protocol-parameter g retries 10
diff --git a/gnu/libexec/uucp/sample/sys2 b/gnu/libexec/uucp/sample/sys2
deleted file mode 100644
index 856529a500a0..000000000000
--- a/gnu/libexec/uucp/sample/sys2
+++ /dev/null
@@ -1,51 +0,0 @@
-# This is an example of a sys file, the file(s) which describe remote
-# systems for Taylor UUCP.  To use it, you must compile the package
-# with HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default),
-# copy this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# If you do not use the ``unknown'' command in the config file, then
-# each system that you communicate with must be listed in a sys file.
-
-# Everything after a '#' character is a comment.  To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# This is a sample sys file that might be used by a system that
-# contacts a couple of other systems, both of which are treated the
-# same.  sys1 provides another example.
-
-# Commands that appear before the first ``system'' commands are
-# defaults for all systems listed in the file.
-
-# Get the login name and password to use from the call-out file.  By
-# default this is the file "call" in newconfigdir.
-call-login *
-call-password *
-
-# The systems must use a particular login
-called-login Ulocal
-
-# Permit local users to send any world readable file
-local-send /
-
-# Permit local uses to request into any world writable directory
-local-receive /
-
-# Call at any time
-time any
-
-# Use port1, then port2
-port port1
-
-alternate
-
-port port2
-
-# Now define the systems themselves.  Because of all the defaults we
-# used, there is very little to specify for the systems themselves.
-
-system comton
-phone 5551212
-
-system bugs
-phone 5552424