679 files changed, 0 insertions, 167431 deletions

diff --git a/src/arm/aks-cdu.dts b/src/arm/aks-cdu.dts
deleted file mode 100644
index d9c50fbb49d2..000000000000
--- a/src/arm/aks-cdu.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * aks-cdu.dts - Device Tree file for AK signal CDU
- *
- * Copyright (C) 2012 AK signal Brno a.s.
- *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-#include "ge863-pro3.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-				};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			uboot@40000 {
-				label = "uboot";
-				reg = <0x40000 0x80000>;
-			};
-			ubootenv@c0000 {
-				label = "ubootenv";
-				reg = <0xc0000 0x40000>;
-			};
-			kernel@100000 {
-				label = "kernel";
-				reg = <0x100000 0x400000>;
-			};
-			rootfs@500000 {
-				label = "rootfs";
-				reg = <0x500000 0x7b00000>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-		};
-
-		green {
-			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		yellow {
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		blue {
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-};
diff --git a/src/arm/am335x-base0033.dts b/src/arm/am335x-base0033.dts
deleted file mode 100644
index 72a9b3fc4251..000000000000
--- a/src/arm/am335x-base0033.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am335x-igep0033.dtsi"
-
-/ {
-	model = "IGEP COM AM335x on AQUILA Expansion";
-	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
-
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_pins>;
-		pinctrl-1 = <&nxp_hdmi_off_pins>;
-		status = "okay";
-	};
-
-	leds_base {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_base_pins>;
-
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "base:red:user";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "base:green:user";
-			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
-		>;
-	};
-	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-		>;
-	};
-
-	leds_base_pins: pinmux_leds_base_pins {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&i2c0 {
-	eeprom: eeprom@50 {
-		compatible = "at,24c256";
-		reg = <0x50>;
-	};
-};
diff --git a/src/arm/am335x-bone-common.dtsi b/src/arm/am335x-bone-common.dtsi
deleted file mode 100644
index bde1777b62be..000000000000
--- a/src/arm/am335x-bone-common.dtsi
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-};
diff --git a/src/arm/am335x-bone.dts b/src/arm/am335x-bone.dts
deleted file mode 100644
index 94ee427a6db1..000000000000
--- a/src/arm/am335x-bone.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo3_reg>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/src/arm/am335x-boneblack.dts b/src/arm/am335x-boneblack.dts
deleted file mode 100644
index 305975d3f531..000000000000
--- a/src/arm/am335x-boneblack.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-		>;
-	};
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-/ {
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/am335x-evm.dts b/src/arm/am335x-evm.dts
deleted file mode 100644
index e2156a583de7..000000000000
--- a/src/arm/am335x-evm.dts
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "TI AM335x EVM";
-	compatible = "ti,am335x-evm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
-			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
-			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
-
-		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
-			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
-
-		linux,keymap = <0x0000008b	/* MENU */
-				0x0100009e	/* BACK */
-				0x02000069	/* LEFT */
-				0x0001006a	/* RIGHT */
-				0x0101001c	/* ENTER */
-				0x0201006c>;	/* DOWN */
-	};
-
-	gpio_keys: volume_keys@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		switch@9 {
-			label = "volume-up";
-			linux,code = <115>;
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-
-		switch@10 {
-			label = "volume-down";
-			linux,code = <114>;
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-	matrix_keypad_s0: matrix_keypad_s0 {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-
-	volume_keys_s0: volume_keys_s0 {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	lcd_pins_s0: lcd_pins_s0 {
-		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tsl2550: tsl2550@39 {
-		compatible = "taos,tsl2550";
-		reg = <0x39>;
-	};
-
-	tmp275: tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: ecap@48300100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000C0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001C0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001E0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00A00000 0x0F600000>;
-		};
-	};
-};
-
-#include "tps65910.dtsi"
-
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
-
-		status = "okay";
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/src/arm/am335x-evmsk.dts b/src/arm/am335x-evmsk.dts
deleted file mode 100644
index df5fee6b6b4b..000000000000
--- a/src/arm/am335x-evmsk.dts
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "TI AM335x EVM-SK";
-	compatible = "ti,am335x-evmsk", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator@2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 29 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "evmsk:green:usr0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "evmsk:green:usr1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "evmsk:green:mmc0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "evmsk:green:heartbeat";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	gpio_buttons: gpio_buttons@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@1 {
-			label = "button0";
-			linux,code = <0x100>;
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch@2 {
-			label = "button1";
-			linux,code = <0x101>;
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch@3 {
-			label = "button2";
-			linux,code = <0x102>;
-			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
-		};
-
-		switch@4 {
-			label = "button3";
-			linux,code = <0x103>;
-			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 58 61 66 75 90 125 170 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVMSK";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-		status = "okay";
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive         = <480>;
-				vactive         = <272>;
-				hback-porch     = <43>;
-				hfront-porch    = <8>;
-				hsync-len       = <4>;
-				vback-porch     = <12>;
-				vfront-porch    = <4>;
-				vsync-len       = <10>;
-				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	lcd_pins_sleep: lcd_pins_sleep {
-		pinctrl-single,pins = <
-			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-		>;
-	};
-
-	gpio_keys_s0: gpio_keys_s0 {
-		pinctrl-single,pins = <
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	ecap2_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&epwmss2 {
-	status = "okay";
-
-	ecap2: ecap@48304100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap2_pins>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0 {
-	ti,no-reset-on-init;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
-
-		status = "okay";
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-};
-
-&lcdc {
-      status = "okay";
-};
diff --git a/src/arm/am335x-igep0033.dtsi b/src/arm/am335x-igep0033.dtsi
deleted file mode 100644
index a1a0cc5eb35c..000000000000
--- a/src/arm/am335x-igep0033.dtsi
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "com:green:user";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vmmc: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-		>;
-	};
-};
-
-&mac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		elm_id = <&elm>;
-
-		/* MTD partition table */
-		partition@0 {
-			label = "SPL";
-			reg = <0x00000000 0x000080000>;
-		};
-
-		partition@1 {
-			label = "U-boot";
-			reg = <0x00080000 0x001e0000>;
-		};
-
-		partition@2 {
-			label = "U-Boot Env";
-			reg = <0x00260000 0x00020000>;
-		};
-
-		partition@3 {
-			label = "Kernel";
-			reg = <0x00280000 0x00500000>;
-		};
-
-		partition@4 {
-			label = "File System";
-			reg = <0x00780000 0x007880000>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-always-on;
-		};
-	};
-};
-
diff --git a/src/arm/am335x-nano.dts b/src/arm/am335x-nano.dts
deleted file mode 100644
index a3466455b171..000000000000
--- a/src/arm/am335x-nano.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Newflow AM335x NanoBone";
-	compatible = "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "nanobone:green:usr1";
-			gpios = <&gpio1 5 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&misc_pins>;
-
-	misc_pins: misc_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
-		>;
-	};
-
-	gpmc_pins: gpmc_pins {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: uart1_pins {
-		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
-		>;
-	};
-
-	uart2_pins: uart2_pins {
-		pinctrl-single,pins = <
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
-		>;
-	};
-
-	uart3_pins: uart3_pins {
-		pinctrl-single,pins = <
-			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
-		>;
-	};
-
-	uart4_pins: uart4_pins {
-		pinctrl-single,pins = <
-			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
-		>;
-	};
-
-	uart5_pins: uart5_pins {
-		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
-		>;
-	};
-
-	mmc1_pins: mmc1_pins {
-		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rx-during-tx;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	gpio@20 {
-		compatible = "mcp,mcp23017";
-		reg = <0x20>;
-	};
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom@53 {
-		compatible = "mcp,24c02";
-		reg = <0x53>;
-		pagesize = <8>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	compatible = "ti,am3352-gpmc";
-	ti,hwmods = "gpmc";
-	status = "okay";
-	gpmc,num-waitpins = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
-
-	nor@0,0 {
-		reg = <0 0x00000000 0x08000000>;
-		compatible = "cfi-flash";
-		linux,mtd-name = "spansion,s29gl010p11t";
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <10>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,oe-on-ns = <40>;
-		gpmc,oe-off-ns = <160>;
-		gpmc,we-on-ns = <40>;
-		gpmc,we-off-ns = <160>;
-		gpmc,rd-cycle-ns = <160>;
-		gpmc,wr-cycle-ns = <160>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <20>;
-		gpmc,wr-data-mux-bus-ns = <70>;
-		gpmc,wr-access-ns = <80>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		MTD partition table
-		===================
-		+------------+-->0x00000000-> U-Boot start
-		|            |
-		|            |-->0x000BFFFF-> U-Boot end
-		|            |-->0x000C0000-> ENV1 start
-		|            |
-		|            |-->0x000DFFFF-> ENV1 end
-		|            |-->0x000E0000-> ENV2 start
-		|            |
-		|            |-->0x000FFFFF-> ENV2 end
-		|            |-->0x00100000-> Kernel start
-		|            |
-		|            |-->0x004FFFFF-> Kernel end
-		|            |-->0x00500000-> File system start
-		|            |
-		|            |-->0x014FFFFF-> File system end
-		|            |-->0x01500000-> User data start
-		|            |
-		|            |-->0x03FFFFFF-> User data end
-		|            |-->0x04000000-> Data storage start
-		|            |
-		+------------+-->0x08000000-> NOR end (Free end)
-		*/
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000c0000>; /* 768KB */
-		};
-
-		partition@1 {
-			label = "env1";
-			reg = <0x000c0000 0x00020000>; /* 128KB */
-		};
-
-		partition@2 {
-			label = "env2";
-			reg = <0x000e0000 0x00020000>; /* 128KB */
-		};
-
-		partition@3 {
-			label = "kernel";
-			reg = <0x00100000 0x00400000>; /* 4MB */
-		};
-
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00500000 0x01000000>; /* 16MB */
-		};
-
-		partition@5 {
-			label = "user";
-			reg = <0x01500000 0x02b00000>; /* 43MB */
-		};
-
-		partition@6 {
-			label = "data";
-			reg = <0x04000000 0x04000000>; /* 64MB */
-		};
-	};
-};
-
-&mac {
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo4_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-	cd-gpios = <&gpio3 8 0>;
-	wp-gpios = <&gpio3 18 0>;
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* +1.5V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1450000>;
-			regulator-max-microvolt = <1550000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/am335x-pepper.dts b/src/arm/am335x-pepper.dts
deleted file mode 100644
index 0d35ab64641c..000000000000
--- a/src/arm/am335x-pepper.dts
+++ /dev/null
@@ -1,653 +0,0 @@
-/*
- * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "am33xx.dtsi"
-
-/ {
-	model = "Gumstix Pepper";
-	compatible = "gumstix,am335x-pepper", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc3_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	buttons: user_buttons {
-		compatible = "gpio-keys";
-	};
-
-	leds: user_leds {
-		compatible = "gpio-leds";
-	};
-
-	panel: lcd_panel {
-		compatible = "ti,tilcdc,panel";
-	};
-
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-	};
-
-	v3v3c_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-	};
-
-	vdd5_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-	};
-};
-
-/* I2C Busses */
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "at,24c256";
-		reg = <0x50>;
-	};
-
-	audio_codec: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-	};
-
-	accel: lis331dlh@1d {
-		compatible = "st,lis3lv02d";
-		reg = <0x1d>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-	i2c1_pins: pinmux_i2c1 {
-		pinctrl-single,pins = <
-			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
-		>;
-	};
-};
-
-/* Accelerometer */
-&accel {
-	pinctrl-names = "default";
-	pinctrl-0 = <&accel_pins>;
-
-	Vdd-supply = <&ldo3_reg>;
-	Vdd_IO-supply = <&ldo3_reg>;
-	st,irq1-click;
-	st,wakeup-x-lo;
-	st,wakeup-x-hi;
-	st,wakeup-y-lo;
-	st,wakeup-y-hi;
-	st,wakeup-z-lo;
-	st,wakeup-z-hi;
-	st,min-limit-x = <92>;
-	st,max-limit-x = <14>;
-	st,min-limit-y = <14>;
-	st,max-limit-y = <92>;
-	st,min-limit-z = <92>;
-	st,max-limit-z = <14>;
-};
-
-&am33xx_pinmux {
-	accel_pins: pinmux_accel {
-		pinctrl-single,pins = <
-			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
-		>;
-	};
-};
-
-/* Audio */
-&audio_codec {
-	status = "okay";
-
-	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	AVDD-supply = <&ldo3_reg>;
-	IOVDD-supply = <&ldo3_reg>;
-	DRVDD-supply = <&ldo3_reg>;
-	DVDD-supply = <&dcdc1_reg>;
-};
-
-&sound {
-	ti,model = "AM335x-EVM";
-	ti,audio-codec = <&audio_codec>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,codec-clock-rate = <12000000>;
-	ti,audio-routing =
-		"Headphone Jack",	"HPLOUT",
-		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
-};
-
-&mcasp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_pins>;
-
-	op-mode = <0>;	/* MCASP_ISS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		1 2 0 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&am33xx_pinmux {
-	audio_pins: pinmux_audio {
-		pinctrl-single,pins = <
-			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-		>;
-	};
-};
-
-/* Display: 24-bit LCD Screen */
-&panel {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-	panel-info {
-		ac-bias = <255>;
-		ac-bias-intrpt = <0>;
-		dma-burst-sz = <16>;
-		bpp = <32>;
-		fdd = <0x80>;
-		sync-edge = <0>;
-		sync-ctrl = <1>;
-		raster-order = <0>;
-		fifo-th = <0>;
-	};
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 480x272 {
-			clock-frequency = <18400000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vfront-porch = <4>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-		};
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	lcd_pins: pinmux_lcd {
-		pinctrl-single,pins = <
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-			/* Display Enable */
-			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-};
-
-/* Ethernet */
-&cpsw_emac0 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
-};
-
-&cpsw_emac1 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-};
-
-&davinci_mdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_pins>;
-};
-
-
-&am33xx_pinmux {
-	ethernet_pins: pinmux_ethernet {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-			/* ethernet interrupt */
-			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
-			/* ethernet PHY nReset */
-			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio {
-		pinctrl-single,pins = <
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-};
-
-/* MMC */
-&mmc1 {
-	/* Bootable SD card slot */
-	status = "okay";
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	/* eMMC (not populated) on MMC #2 */
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
-};
-
-
-&mmc3 {
-	/* Wifi & Bluetooth on MMC #3 */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wireless_pins>;
-	vmmmc-supply = <&v3v3c_reg>;
-	bus-width = <4>;
-	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
-	dma-names = "tx", "rx";
-};
-
-
-&am33xx_pinmux {
-	sd_pins: pinmux_sd_card {
-		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
-		>;
-	};
-	emmc_pins: pinmux_emmc {
-		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-			/* EMMC nReset */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-		>;
-	};
-	wireless_pins: pinmux_wireless {
-		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
-			/* WLAN nReset */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			/* WLAN nPower down */
-			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			/* 32kHz Clock */
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&v3v3c_reg {
-	regulator-name = "v3v3c_reg";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	vin-supply = <&vbat>;
-};
-
-&vdd5_reg {
-	regulator-name = "vdd5_reg";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-	vin-supply = <&vbat>;
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	backlight {
-		isel = <1>; /* ISET1 */
-		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
-		default-brightness = <80>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* VDD_1V8 system supply */
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* VRTC 1.8V always-on supply */
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* 3.3V rail */
-		};
-
-		ldo3_reg: regulator@5 {
-			/* VDD_3V3A 3.3V rail */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* VDD_3V3B 3.3V rail */
-		};
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-};
-
-&am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
-		>;
-	};
-};
-
-/* Touch Screen */
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-/* UARTs */
-&uart0 {
-	/* Serial Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	/* Broken out to J6 header */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-		>;
-	};
-};
-
-/* USB */
-&usb {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_pins>;
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&cppi41dma {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	usb_pins: pinmux_usb {
-		pinctrl-single,pins = <
-			/* USB0 Over-Current (active low) */
-			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			/* USB1 Over-Current (active low) */
-			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-/* User IO */
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_leds_pins>;
-
-	led@0 {
-		label = "pepper:user0:blue";
-		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-
-	led@1 {
-		label = "pepper:user1:red";
-		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_buttons_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	button@0 {
-		label = "home";
-		linux,code = <KEY_HOME>;
-		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-
-	button@1 {
-		label = "menu";
-		linux,code = <KEY_MENU>;
-		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-
-	buttons@2 {
-		label = "power";
-		linux,code = <KEY_POWER>;
-		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
-		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-		>;
-	};
-
-	user_buttons_pins: pinmux_user_buttons {
-		pinctrl-single,pins = <
-			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
-		>;
-	};
-};
diff --git a/src/arm/am33xx-clocks.dtsi b/src/arm/am33xx-clocks.dtsi
deleted file mode 100644
index 712edce7d6fb..000000000000
--- a/src/arm/am33xx-clocks.dtsi
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * Device Tree Source for AM33xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0480>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0484>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x04d8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_disp_ck: dpll_disp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a4>;
-		ti,index-starts-at-one;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x04ac>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	cefuse_fck: cefuse_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0a20>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x014c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
-		reg = <0x0530>;
-	};
-
-	mmu_fck: mmu_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0914>;
-	};
-
-	timer1_fck: timer1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
-		reg = <0x0528>;
-	};
-
-	timer2_fck: timer2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0508>;
-	};
-
-	timer3_fck: timer3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x050c>;
-	};
-
-	timer4_fck: timer4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0510>;
-	};
-
-	timer5_fck: timer5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0518>;
-	};
-
-	timer6_fck: timer6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x051c>;
-	};
-
-	timer7_fck: timer7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0504>;
-	};
-
-	usbotg_fck: usbotg_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x047c>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ieee5000_fck: ieee5000_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x00e4>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x0538>;
-	};
-
-	l4_rtc_gclk: l4_rtc_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4fw_gclk: l4fw_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sysclk_div_ck: sysclk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
-		reg = <0x0520>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
-		reg = <0x053c>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0408>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00ac>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b0>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b4>;
-	};
-
-	lcd_gclk: lcd_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x0534>;
-		ti,set-rate-parent;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
-
-	sysclkout_pre_ck: sysclkout_pre_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
-	};
-
-	clkout2_div_ck: clkout2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
-
-	dbg_sysclk_ck: dbg_sysclk_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0414>;
-	};
-
-	dbg_clka_ck: dbg_clka_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0414>;
-	};
-
-	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0414>;
-	};
-
-	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0414>;
-	};
-
-	stm_clk_div_ck: stm_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&stm_pmd_clock_mux_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&trace_pmd_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	clkout2_ck: clkout2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
-	};
-};
-
-&prcm_clockdomains {
-	clk_24mhz_clkdm: clk_24mhz_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&clkdiv32k_ick>;
-	};
-};
diff --git a/src/arm/am33xx.dtsi b/src/arm/am33xx.dtsi
deleted file mode 100644
index 3a0a161342ba..000000000000
--- a/src/arm/am33xx.dtsi
+++ /dev/null
@@ -1,845 +0,0 @@
-/*
- * Device Tree Source for AM33XX SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/am33xx.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,am33xx";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		d_can0 = &dcan0;
-		d_can1 = &dcan1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				720000  1285000
-				600000  1225000
-				500000  1125000
-				275000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x44e10800 0x0238>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x7f>;
-	};
-
-	/*
-	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		prcm: prcm@44e00000 {
-			compatible = "ti,am3-prcm";
-			reg = <0x44e00000 0x4000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@44e10000 {
-			compatible = "ti,am3-scrm";
-			reg = <0x44e10000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <128>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x44e07000 0x1000>;
-			interrupts = <96>;
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ac000 0x1000>;
-			interrupts = <32>;
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ae000 0x1000>;
-			interrupts = <62>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			reg = <0x44e09000 0x2000>;
-			interrupts = <72>;
-			status = "disabled";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			reg = <0x48022000 0x2000>;
-			interrupts = <73>;
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			reg = <0x48024000 0x2000>;
-			interrupts = <74>;
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-			reg = <0x481a6000 0x2000>;
-			interrupts = <44>;
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			reg = <0x481a8000 0x2000>;
-			interrupts = <45>;
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			reg = <0x481aa000 0x2000>;
-			interrupts = <46>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <70>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <71>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <30>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <64>;
-			interrupt-parent = <&intc>;
-			reg = <0x48060000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <28>;
-			interrupt-parent = <&intc>;
-			reg = <0x481d8000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		wdt2: wdt@44e35000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <91>;
-		};
-
-		dcan0: d_can@481cc000 {
-			compatible = "bosch,d_can";
-			ti,hwmods = "d_can0";
-			reg = <0x481cc000 0x2000
-				0x44e10644 0x4>;
-			interrupts = <52>;
-			status = "disabled";
-		};
-
-		dcan1: d_can@481d0000 {
-			compatible = "bosch,d_can";
-			ti,hwmods = "d_can1";
-			reg = <0x481d0000 0x2000
-				0x44e10644 0x4>;
-			interrupts = <55>;
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48040000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48040000 0x400>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <75
-				      76>;
-			ti,hwmods = "rtc";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x48030000 0x400>;
-			interrupts = <65>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x481a0000 0x400>;
-			interrupts = <125>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-			status = "disabled";
-
-			usb_ctrl_mod: control@44e10620 {
-				compatible = "ti,am335x-usb-ctrl-module";
-				reg = <0x44e10620 0x10
-					0x44e10648 0x4>;
-				reg-names = "phy_ctrl", "wakeup";
-				status = "disabled";
-			};
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401400 0x400
-					0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1_phy: usb-phy@47401b00 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401b00 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-				status = "disabled";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			ti,hwmods = "epwmss0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
-				  0x48300180 0x48300180 0x80   /* EQEP */
-				  0x48300200 0x48300200 0x80>; /* EHRPWM */
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				interrupts = <31>;
-				interrupt-names = "ecap0";
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
-
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			ti,hwmods = "epwmss1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
-				  0x48302180 0x48302180 0x80   /* EQEP */
-				  0x48302200 0x48302200 0x80>; /* EHRPWM */
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				interrupts = <47>;
-				interrupt-names = "ecap1";
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			ti,hwmods = "epwmss2";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
-				  0x48304180 0x48304180 0x80   /* EQEP */
-				  0x48304200 0x48304200 0x80>; /* EHRPWM */
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				interrupts = <61>;
-				interrupt-names = "ecap2";
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
-				status = "disabled";
-			};
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			status = "disabled";
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a101000 0x100>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am3352-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "ti,am3352-ocmcram";
-			reg = <0x40300000 0x10000>;
-			ti,hwmods = "ocmcram";
-		};
-
-		wkup_m3: wkup_m3@44d00000 {
-			compatible = "ti,am3353-wkup-m3";
-			reg = <0x44d00000 0x4000	/* M3 UMEM */
-			       0x44d80000 0x2000>;	/* M3 DMEM */
-			ti,hwmods = "wkup_m3";
-			ti,no-reset-on-init;
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		lcdc: lcdc@4830e000 {
-			compatible = "ti,am33xx-tilcdc";
-			reg = <0x4830e000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <36>;
-			ti,hwmods = "lcdc";
-			status = "disabled";
-		};
-
-		tscadc: tscadc@44e0d000 {
-			compatible = "ti,am3359-tscadc";
-			reg = <0x44e0d000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <16>;
-			ti,hwmods = "adc_tsc";
-			status = "disabled";
-
-			tsc {
-				compatible = "ti,am3359-tsc";
-			};
-			am335x_adc: adc {
-				#io-channel-cells = <1>;
-				compatible = "ti,am3359-adc";
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-		};
-
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
-			dma-names = "tx", "rx";
-		};
-
-		rng: rng@48310000 {
-			compatible = "ti,omap4-rng";
-			ti,hwmods = "rng";
-			reg = <0x48310000 0x2000>;
-			interrupts = <111>;
-		};
-	};
-};
-
-/include/ "am33xx-clocks.dtsi"
diff --git a/src/arm/am3517-craneboard.dts b/src/arm/am3517-craneboard.dts
deleted file mode 100644
index 2d40b3f241cd..000000000000
--- a/src/arm/am3517-craneboard.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * See craneboard.org for more details
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
-	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-};
-
-&davinci_emac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc1 {
-	vmmc-supply = <&vdd2_reg>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc3 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-#include "tps65910.dtsi"
-
-&omap3_pmx_core {
-	tps_pins: pinmux_tps_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
-		>;
-	};
-};
-
-&tps {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tps_pins>;
-
-	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	interrupt-parent = <&intc>;
-
-	ti,en-ck32k-xtal;
-
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		/*
-		 * Unused:
-		 * VDIG1=2.7V,300mA max
-		 * VDIG2=1.8V,300mA max
-		 */
-
-		vpll_reg: regulator@7 {
-			/* VDDS_DPLL_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			/* VDDS_SRAM_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			/* VDDA1P8V_USBPHY */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		/* VAUX33 unused */
-
-		vdac_reg: regulator@8 {
-			/* VDDA_DAC_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			/* VDDA3P3V_USBPHY */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_CORE */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDDSHV_3V3 */
-			regulator-name = "vdd_shv";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		/* VDD3 unused */
-	};
-};
diff --git a/src/arm/am3517-evm.dts b/src/arm/am3517-evm.dts
deleted file mode 100644
index b4127c6493a2..000000000000
--- a/src/arm/am3517-evm.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
-	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
-};
-
-&davinci_emac {
-	     status = "okay";
-};
-
-&davinci_mdio {
-	     status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc_fixed>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-      status = "disabled";
-};
-
-&mmc3 {
-      status = "disabled";
-};
-
diff --git a/src/arm/am3517.dtsi b/src/arm/am3517.dtsi
deleted file mode 100644
index 5a452fdd7c5d..000000000000
--- a/src/arm/am3517.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Device Tree Source for am3517 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-	};
-
-	ocp {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
-		};
-
-		davinci_emac: ethernet@0x5c000000 {
-			compatible = "ti,am3517-emac";
-			ti,hwmods = "davinci_emac";
-			status = "disabled";
-			reg = <0x5c000000 0x30000>;
-			interrupts = <67 68 69 70>;
-			ti,davinci-ctrl-reg-offset = <0x10000>;
-			ti,davinci-ctrl-mod-reg-offset = <0>;
-			ti,davinci-ctrl-ram-offset = <0x20000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			ti,davinci-rmii-en = /bits/ 8 <1>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-		};
-
-		davinci_mdio: ethernet@0x5c030000 {
-			compatible = "ti,davinci_mdio";
-			ti,hwmods = "davinci_mdio";
-			status = "disabled";
-			reg = <0x5c030000 0x1000>;
-			bus_freq = <1000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart4: serial@4809e000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			status = "disabled";
-			reg = <0x4809e000 0x400>;
-			interrupts = <84>;
-			dmas = <&sdma 55 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-	};
-};
-
-&iva {
-	status = "disabled";
-};
-
-&mailbox {
-	status = "disabled";
-};
-
-&mmu_isp {
-	status = "disabled";
-};
-
-&smartreflex_mpu_iva {
-	status = "disabled";
-};
-
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/src/arm/am3517_mt_ventoux.dts b/src/arm/am3517_mt_ventoux.dts
deleted file mode 100644
index fdf5ce63c8e6..000000000000
--- a/src/arm/am3517_mt_ventoux.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	/* AM35xx doesn't have IVA */
-	soc {
-		iva {
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/am35xx-clocks.dtsi b/src/arm/am35xx-clocks.dtsi
deleted file mode 100644
index df489d310b50..000000000000
--- a/src/arm/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	emac_ick: emac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <1>;
-	};
-
-	emac_fck: emac_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&rmii_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <9>;
-	};
-
-	vpfe_ick: vpfe_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <2>;
-	};
-
-	vpfe_fck: vpfe_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pclk_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <10>;
-	};
-
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <0>;
-	};
-
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <8>;
-	};
-
-	hecc_ck: hecc_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <3>;
-	};
-};
-&cm_clocks {
-	ipss_ick: ipss_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	rmii_ck: rmii_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	pclk_ck: pclk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	uart4_ick_am35xx: uart4_ick_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	uart4_fck_am35xx: uart4_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
-			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
-			 <&hecc_ck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
-	};
-};
diff --git a/src/arm/am4372.dtsi b/src/arm/am4372.dtsi
deleted file mode 100644
index 9b3d2ba82f13..000000000000
--- a/src/arm/am4372.dtsi
+++ /dev/null
@@ -1,891 +0,0 @@
-/*
- * Device Tree Source for AM4372 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,am4372", "ti,am43";
-	interrupt-parent = <&gic>;
-
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-	};
-
-	l2-cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x44e10800 0x31c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
-	ocp {
-		compatible = "ti,am4372-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-		reg = <0x44000000 0x400000
-		       0x44800000 0x400000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		prcm: prcm@44df0000 {
-			compatible = "ti,am4-prcm";
-			reg = <0x44df0000 0x11000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@44e10000 {
-			compatible = "ti,am4-scrm";
-			reg = <0x44e10000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x44e09000 0x2000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48022000 0x2000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48024000 0x2000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a6000 0x2000>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a8000 0x2000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481aa000 0x2000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-alwon;
-			ti,hwmods = "timer1";
-		};
-
-		timer2: timer@48040000  {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48040000  0x400>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-			status = "disabled";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer4";
-			status = "disabled";
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer5";
-			status = "disabled";
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer6";
-			status = "disabled";
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer7";
-			status = "disabled";
-		};
-
-		timer8: timer@481c1000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x481c1000 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			status = "disabled";
-		};
-
-		timer9: timer@4833d000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833d000 0x400>;
-			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			status = "disabled";
-		};
-
-		timer10: timer@4833f000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833f000 0x400>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			status = "disabled";
-		};
-
-		timer11: timer@48341000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48341000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			status = "disabled";
-		};
-
-		counter32k: counter@44e86000 {
-			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
-			reg = <0x44e86000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,am4372-rtc","ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "rtc";
-			status = "disabled";
-		};
-
-		wdt: wdt@44e35000 {
-			compatible = "ti,am4372-wdt","ti,omap3-wdt";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x44e07000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio1";
-			status = "disabled";
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x4804c000 0x1000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio2";
-			status = "disabled";
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ac000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio3";
-			status = "disabled";
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ae000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio4";
-			status = "disabled";
-		};
-
-		gpio4: gpio@48320000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48320000 0x1000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio5";
-			status = "disabled";
-		};
-
-		gpio5: gpio@48322000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48322000 0x1000>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio6";
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48030000 0x400>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x1000>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x481d8000 0x1000>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x47810000 0x1000>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a0000 0x400>;
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@481a2000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a2000 0x400>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi3: spi@481a4000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a4000 0x400>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@48345000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48345000 0x400>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi4";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,am4372-cpsw","ti,cpsw";
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			status = "disabled";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			ranges;
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,am4372-mdio","ti,davinci_mdio";
-				reg = <0x4a101000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am43xx-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss0";
-			status = "disabled";
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
-
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss1";
-			status = "disabled";
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss2";
-			status = "disabled";
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
-				status = "disabled";
-			};
-		};
-
-		epwmss3: epwmss@48306000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48306000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss3";
-			status = "disabled";
-
-			ehrpwm3: ehrpwm@48306200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48306200 0x80>;
-				ti,hwmods = "ehrpwm3";
-				status = "disabled";
-			};
-		};
-
-		epwmss4: epwmss@48308000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48308000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss4";
-			status = "disabled";
-
-			ehrpwm4: ehrpwm@48308200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48308200 0x80>;
-				ti,hwmods = "ehrpwm4";
-				status = "disabled";
-			};
-		};
-
-		epwmss5: epwmss@4830a000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x4830a000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss5";
-			status = "disabled";
-
-			ehrpwm5: ehrpwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x4830a200 0x80>;
-				ti,hwmods = "ehrpwm5";
-				status = "disabled";
-			};
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
-			dma-names = "tx", "rx";
-		};
-
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
-			dma-names = "tx", "rx";
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			clocks = <&l4ls_gclk>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			clocks = <&l3s_gclk>;
-			clock-names = "fck";
-			reg = <0x50000000 0x2000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		am43xx_control_usb2phy1: control-phy@44e10620 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10620 0x4>;
-			reg-names = "power";
-		};
-
-		am43xx_control_usb2phy2: control-phy@0x44e10628 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10628 0x4>;
-			reg-names = "power";
-		};
-
-		ocp2scp0: ocp2scp@483a8000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp0";
-
-			usb2_phy1: phy@483a8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483a8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy1>;
-				clocks = <&usb_phy0_always_on_clk32k>,
-					 <&usb_otg_ss0_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ocp2scp1: ocp2scp@483e8000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy2: phy@483e8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483e8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy2>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		dwc3_1: omap_dwc3@48380000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss0";
-			reg = <0x48380000 0x10000>;
-			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb1: usb@48390000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x17000>;
-				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy1>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-			};
-		};
-
-		dwc3_2: omap_dwc3@483c0000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x483c0000 0x10000>;
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb2: usb@483d0000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x17000>;
-				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-			};
-		};
-
-		qspi: qspi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
-		};
-
-		hdq: hdq@48347000 {
-			compatible = "ti,am43xx-hdq";
-			reg = <0x48347000 0x1000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&func_12m_clk>;
-			clock-names = "fck";
-			ti,hwmods = "hdq1w";
-			status = "disabled";
-		};
-
-		dss: dss@4832a000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x4832a000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&disp_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc: dispc@4832a400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x4832a400 0x400>;
-				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-
-			rfbi: rfbi@4832a800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x4832a800 0x100>;
-				ti,hwmods = "dss_rfbi";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-		};
-	};
-};
-
-/include/ "am43xx-clocks.dtsi"
diff --git a/src/arm/am437x-gp-evm.dts b/src/arm/am437x-gp-evm.dts
deleted file mode 100644
index 646a6eade788..000000000000
--- a/src/arm/am437x-gp-evm.dts
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM437x GP EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "TI AM437x GP EVM";
-	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
-				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
-				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
-
-		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
-				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
-
-		linux,keymap = <0x00000201      /* P1 */
-				0x00010202      /* P2 */
-				0x01000067      /* UP */
-				0x0101006a      /* RIGHT */
-				0x02000069      /* LEFT */
-				0x0201006c>;      /* DOWN */
-		};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-&am43xx_pinmux {
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	pixcir_ts_pins: pixcir_ts_pins {
-		pinctrl-single,pins = <
-			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	nand_flash_x8: nand_flash_x8 {
-		pinctrl-single,pins = <
-			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
-			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-
-		>;
-	};
-
-	lcd_pins: lcd_pins {
-		pinctrl-single,pins = <
-			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
-		interrupt-parent = <&gic>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-
-		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&gpio4 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-	ti,no-reset-on-init;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>;
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <25>;
-		gpmc,adv-wr-off-ns = <25>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <20>;
-		gpmc,oe-on-ns = <3>;
-		gpmc,oe-off-ns = <30>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000c0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002c0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/am437x-sk-evm.dts b/src/arm/am437x-sk-evm.dts
deleted file mode 100644
index 859ff3d620ee..000000000000
--- a/src/arm/am437x-sk-evm.dts
+++ /dev/null
@@ -1,613 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM437x SK EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TI AM437x SK EVM";
-	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM437x-SK-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_pins>;
-
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
-
-		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
-				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
-
-		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
-				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
-
-		linux,keymap = <
-				MATRIX_KEY(0, 0, KEY_DOWN)
-				MATRIX_KEY(0, 1, KEY_RIGHT)
-				MATRIX_KEY(1, 0, KEY_LEFT)
-				MATRIX_KEY(1, 1, KEY_UP)
-			>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		led@0 {
-			label = "am437x-sk:red:heartbeat";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "am437x-sk:green:mmc1";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "am437x-sk:blue:cpu0";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "am437x-sk:blue:usr3";
-			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
-			default-state = "off";
-		};
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <43>;
-			hsync-len = <4>;
-			vback-porch = <12>;
-			vfront-porch = <4>;
-			vsync-len = <10>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-&am43xx_pinmux {
-	matrix_keypad_pins: matrix_keypad_pins {
-		pinctrl-single,pins = <
-			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
-		>;
-	};
-
-	leds_pins: leds_pins {
-		pinctrl-single,pins = <
-			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
-		>;
-	};
-
-	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
-
-			/* Slave 2 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS AC BIAS EN */
-
-		>;
-	};
-
-	qspi_pins: qspi_pins {
-		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	lcd_pins: lcd_pins {
-		pinctrl-single,pins = <
-			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps@24 {
-		compatible = "ti,tps65218";
-		reg = <0x24>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			/* VDD_CORE limits min of OPP50 and max of OPP100 */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdds_ddr";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
-			regulator-name = "v3_3d";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-name = "v1_8d";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-	};
-
-	at24@50 {
-		compatible = "at24,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	edt-ft5306@38 {
-		status = "okay";
-		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
-		pinctrl-names = "default";
-		pinctrl-0 = <&edt_ft5306_ts_pins>;
-
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <31 0>;
-
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <272>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&dcdc4>;
-		IOVDD-supply = <&dcdc4>;
-		DRVDD-supply = <&dcdc4>;
-		DVDD-supply = <&ldo1>;
-	};
-
-	lis331dlh@18 {
-		compatible = "st,lis331dlh";
-		reg = <0x18>;
-		status = "okay";
-
-		Vdd-supply = <&dcdc4>;
-		Vdd_IO-supply = <&dcdc4>;
-		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	vmmc-supply = <&dcdc4>;
-	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <5>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&mcasp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp1_pins>;
-
-	status = "okay";
-
-	op-mode = <0>;
-	tdm-slots = <2>;
-	serial-dir = <
-		0 0 1 2
-	>;
-
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/src/arm/am43x-epos-evm.dts b/src/arm/am43x-epos-evm.dts
deleted file mode 100644
index ed7dd2395915..000000000000
--- a/src/arm/am43x-epos-evm.dts
+++ /dev/null
@@ -1,629 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM43x EPOS EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		nand_flash_x8: nand_flash_x8 {
-			pinctrl-single,pins = <
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		ecap0_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		i2c2_pins: pinmux_i2c2_pins {
-			pinctrl-single,pins = <
-				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
-			>;
-		};
-
-		spi0_pins: pinmux_spi0_pins {
-			pinctrl-single,pins = <
-				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
-			>;
-		};
-
-		spi1_pins: pinmux_spi1_pins {
-			pinctrl-single,pins = <
-				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
-			>;
-		};
-
-		mmc1_pins: pinmux_mmc1_pins {
-			pinctrl-single,pins = <
-				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-			>;
-		};
-
-		qspi1_default: qspi1_default {
-			pinctrl-single,pins = <
-				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
-				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
-			>;
-		};
-
-		pixcir_ts_pins: pixcir_ts_pins {
-			pinctrl-single,pins = <
-				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
-			>;
-		};
-
-		hdq_pins: pinmux_hdq_pins {
-			pinctrl-single,pins = <
-				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
-			>;
-		};
-
-		dss_pins: dss_pins {
-			pinctrl-single,pins = <
-				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-			>;
-		};
-
-		lcd_pins: lcd_pins {
-			pinctrl-single,pins = <
-				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-			compatible = "gpio-matrix-keypad";
-			debounce-delay-ms = <5>;
-			col-scan-delay-us = <2>;
-
-			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-			linux,keymap = <0x00000201	/* P1 */
-				0x01000204	/* P4 */
-				0x02000207	/* P7 */
-				0x0300020a	/* NUMERIC_STAR */
-				0x00010202	/* P2 */
-				0x01010205	/* P5 */
-				0x02010208	/* P8 */
-				0x03010200	/* P0 */
-				0x00020203	/* P3 */
-				0x01020206	/* P6 */
-				0x02020209	/* P9 */
-				0x0302020b	/* NUMERIC_POUND */
-				0x00030067	/* UP */
-				0x0103006a	/* RIGHT */
-				0x0203006c	/* DOWN */
-				0x03030069>;	/* LEFT */
-		};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
-		interrupt-parent = <&gic>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-
-	at24@50 {
-		compatible = "at24,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
-
-		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
-		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,we-on-ns = <0>;   /* cs-on-ns */
-		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
-		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
-		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
-		gpmc,access-ns = <30>; /* tCEA + 4*/
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000C0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002C0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_default>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&hdq {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/am43xx-clocks.dtsi b/src/arm/am43xx-clocks.dtsi
deleted file mode 100644
index c7dc9dab93a4..000000000000
--- a/src/arm/am43xx-clocks.dtsi
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * Device Tree Source for AM43xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0040>;
-	};
-
-	crystal_freq_sel_ck: crystal_freq_sel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0040>;
-	};
-
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm3_tbclk: ehrpwm3_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm4_tbclk: ehrpwm4_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm5_tbclk: ehrpwm5_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d3c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d40>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_disp_ck: dpll_disp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e30>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2df0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a38>;
-	};
-
-	sysclk_div: sysclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
-		reg = <0x4248>;
-	};
-
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timer1_fck: timer1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4200>;
-	};
-
-	timer2_fck: timer2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4204>;
-	};
-
-	timer3_fck: timer3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4208>;
-	};
-
-	timer4_fck: timer4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x420c>;
-	};
-
-	timer5_fck: timer5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4210>;
-	};
-
-	timer6_fck: timer6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4214>;
-	};
-
-	timer7_fck: timer7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4218>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x422c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
-		reg = <0x4238>;
-	};
-
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4240>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2b68>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c78>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c80>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c88>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c90>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c98>;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x423c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x423c>;
-		ti,max-div = <2>;
-	};
-
-	disp_clk: disp_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x4244>;
-		ti,set-rate-parent;
-	};
-
-	dpll_extdev_ck: dpll_extdev_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
-	};
-
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_extdev_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mux_synctimer32k_ck: mux_synctimer32k_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
-		reg = <0x4230>;
-	};
-
-	synctimer_32kclk: synctimer_32kclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&mux_synctimer32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a30>;
-	};
-
-	timer8_fck: timer8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x421c>;
-	};
-
-	timer9_fck: timer9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4220>;
-	};
-
-	timer10_fck: timer10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4224>;
-	};
-
-	timer11_fck: timer11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4228>;
-	};
-
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpsw_50m_clkdiv>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_per_ck>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e14>;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_aging_clk_div: dll_aging_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x4250>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	div_core_25m_ck: div_core_25m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_12m_clk: func_12m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	vtp_clk_div: vtp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4260>;
-	};
-
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a40>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a48>;
-	};
-
-	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a60>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a68>;
-	};
-};
diff --git a/src/arm/armada-370-db.dts b/src/arm/armada-370-db.dts
deleted file mode 100644
index 416f4e5a69c1..000000000000
--- a/src/arm/armada-370-db.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 evaluation board
- * (DB-88F6710-BP-DDR3)
- *
- *  Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Evaluation Board";
-	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <100000>;
-				status = "okay";
-				audio_codec: audio-codec@4a {
-					compatible = "cirrus,cs42l51";
-					reg = <0x4a>;
-				};
-			};
-
-			audio-controller@30000 {
-				pinctrl-0 = <&i2s_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				/*
-				 * This device is disabled by default, because
-				 * using the SD card connector requires
-				 * changing the default CON40 connector
-				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-				 * different connector
-				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-				 */
-				status = "disabled";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			pinctrl {
-				/*
-				 * These pins might be muxed as I2S by
-				 * the bootloader, but it conflicts
-				 * with the real I2S pins that are
-				 * muxed using i2s_pins. We must mux
-				 * those pins to a function other than
-				 * I2S.
-				 */
-				pinctrl-0 = <&hog_pins1 &hog_pins2>;
-				pinctrl-names = "default";
-
-				hog_pins1: hog-pins1 {
-					marvell,pins = "mpp6",  "mpp8", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "gpio";
-				};
-
-				hog_pins2: hog-pins2 {
-					marvell,pins = "mpp5", "mpp7", "mpp9";
-					marvell,function = "gpo";
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * both standard PCIe slots and mini-PCIe
-			 * slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	sound {
-	      compatible = "marvell,a370db-audio";
-	      marvell,audio-controller = <&audio_controller>;
-	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
-	      status = "okay";
-	};
-
-	spdif_out: spdif-out {
-	      compatible = "linux,spdif-dit";
-	};
-
-	spdif_in: spdif-in {
-	      compatible = "linux,spdif-dir";
-	};
-};
diff --git a/src/arm/armada-370-mirabox.dts b/src/arm/armada-370-mirabox.dts
deleted file mode 100644
index 097df7d8f0f6..000000000000
--- a/src/arm/armada-370-mirabox.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Device Tree file for Globalscale Mirabox
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Globalscale Mirabox";
-	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected on the PCB to a USB 3.0 XHCI controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			timer@20300 {
-				clock-frequency = <600000000>;
-				status = "okay";
-			};
-
-			pinctrl {
-				pwr_led_pin: pwr-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				stat_led_pins: stat-led-pins {
-					marvell,pins = "mpp64", "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
-
-				green_pwr_led {
-					label = "mirabox:green:pwr";
-					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-
-				blue_stat_led {
-					label = "mirabox:blue:stat";
-					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_stat_led {
-					label = "mirabox:green:stat";
-					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins3>;
-				pinctrl-names = "default";
-				status = "okay";
-				/*
-				 * No CD or WP GPIOs: SDIO interface used for
-				 * Wifi/Bluetooth chip
-				 */
-				 broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pca9505: pca9505@25 {
-					compatible = "nxp,pca9505";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x25>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x400000>;
-				};
-				partition@400000 {
-					label = "Linux";
-					reg = <0x400000 0x400000>;
-				};
-				partition@800000 {
-					label = "Filesystem";
-					reg = <0x800000 0x3f800000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-370-netgear-rn102.dts b/src/arm/armada-370-netgear-rn102.dts
deleted file mode 100644
index d6d572e5af32..000000000000
--- a/src/arm/armada-370-netgear-rn102.dts
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 102
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 102";
-	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to Marvell SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			pinctrl {
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp57";
-					marvell,function = "gpio";
-				};
-
-				sata1_led_pin: sata1-led-pin {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				sata2_led_pin: sata2-led-pin {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp56";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp58";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				poweroff: poweroff {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <100000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isl,isl12057";
-					reg = <0x68>;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin
-			     &sata1_led_pin
-			     &sata2_led_pin
-			     &backup_led_pin>;
-		pinctrl-names = "default";
-
-		blue-power-led {
-			label = "rn102:blue:pwr";
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		green-sata1-led {
-			label = "rn102:green:sata1";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		green-sata2-led {
-			label = "rn102:green:sata2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		green-backup-led {
-			label = "rn102:green:backup";
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin
-			     &reset_button_pin
-			     &backup_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/src/arm/armada-370-netgear-rn104.dts b/src/arm/armada-370-netgear-rn104.dts
deleted file mode 100644
index c5fe8b5dcdc7..000000000000
--- a/src/arm/armada-370-netgear-rn104.dts
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 104
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 104";
-	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to Marvell 88SE9215 SATA controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				poweroff: poweroff {
-					marvell,pins = "mpp60";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp52";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp64";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <100000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isl,isl12057";
-					reg = <0x68>;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				pca9554: pca9554@23 {
-					compatible = "nxp,pca9554";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x23>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&backup_led_pin &power_led_pin>;
-		pinctrl-names = "default";
-
-		blue-backup-led {
-			label = "rn104:blue:backup";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue-power-led {
-			label = "rn104:blue:pwr";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "keep";
-		};
-
-		blue-sata1-led {
-			label = "rn104:blue:sata1";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata2-led {
-			label = "rn104:blue:sata2";
-			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata3-led {
-			label = "rn104:blue:sata3";
-			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata4-led {
-			label = "rn104:blue:sata4";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&backup_button_pin
-			     &power_button_pin
-			     &reset_button_pin>;
-		pinctrl-names = "default";
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/src/arm/armada-370-rd.dts b/src/arm/armada-370-rd.dts
deleted file mode 100644
index 4169f4096ea3..000000000000
--- a/src/arm/armada-370-rd.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 Reference Design board
- * (RD-88F6710-A1)
- *
- *  Copied from arch/arm/boot/dts/armada-370-db.dts
- *
- *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Reference Design";
-	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Internal mini-PCIe connector */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			gpio-keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				button@1 {
-					label = "Software Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-		};
-	};
- };
diff --git a/src/arm/armada-370-xp.dtsi b/src/arm/armada-370-xp.dtsi
deleted file mode 100644
index 23227e0027ec..000000000000
--- a/src/arm/armada-370-xp.dtsi
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common to the Armada
- * 370 and Armada XP SoC.
- */
-
-/include/ "skeleton64.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 370 and XP SoC";
-	compatible = "marvell,armada-370-xp";
-
-	aliases {
-		eth0 = &eth0;
-		eth1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "marvell,sheeva-v7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&mpic>;
-		pcie-mem-aperture = <0xf8000000 0x7e00000>;
-		pcie-io-aperture  = <0xffe00000 0x100000>;
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <50>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <31>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <32>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <41>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <42>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			coredivclk: corediv-clock@18740 {
-				compatible = "marvell,armada-370-corediv-clock";
-				reg = <0x18740 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-			};
-
-			coherency-fabric@20200 {
-				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21010 0x1c>;
-			};
-
-			timer@20300 {
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-			};
-
-			watchdog@20300 {
-				reg = <0x20300 0x34>, <0x20704 0x4>;
-			};
-
-			pmsu@22000 {
-				compatible = "marvell,armada-370-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			usb@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x500>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts = <8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			eth1: ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x74000 0x4000>;
-				interrupts = <10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			sata@a0000 {
-				compatible = "marvell,armada-370-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <55>;
-				clocks = <&gateclk 15>, <&gateclk 30>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <113>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <54>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-		};
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-	};
- };
diff --git a/src/arm/armada-370.dtsi b/src/arm/armada-370.dtsi
deleted file mode 100644
index 21b588b6f6bd..000000000000
--- a/src/arm/armada-370.dtsi
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 370 family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada 370 SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Marvell Armada 370 family SoC";
-	compatible = "marvell,armada370", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	soc {
-		compatible = "marvell,armada370-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			L2: l2-cache {
-				compatible = "marvell,aurora-outer-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				wt-override;
-			};
-
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6710-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins1: sdio-pins1 {
-					marvell,pins = "mpp9",  "mpp11", "mpp12",
-							"mpp13", "mpp14", "mpp15";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins2: sdio-pins2 {
-					marvell,pins = "mpp47", "mpp48", "mpp49",
-							"mpp50", "mpp51", "mpp52";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins3: sdio-pins3 {
-					marvell,pins = "mpp48", "mpp49", "mpp50",
-							"mpp51", "mpp52", "mpp53";
-					marvell,function = "sd0";
-				};
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp2", "mpp3";
-					marvell,function = "i2c0";
-				};
-
-				i2s_pins1: i2s-pins1 {
-					marvell,pins = "mpp5", "mpp6", "mpp7",
-						       "mpp8", "mpp9", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "audio";
-				};
-
-				i2s_pins2: i2s-pins2 {
-					marvell,pins = "mpp49", "mpp47", "mpp50",
-						       "mpp59", "mpp57", "mpp61",
-						       "mpp62", "mpp60", "mpp58";
-					marvell,function = "audio";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-370-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-370-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal@18300 {
-				compatible = "marvell,armada370-thermal";
-				reg = <0x18300 0x4
-					0x18304 0x4>;
-				status = "okay";
-			};
-
-			interrupt-controller@20000 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-370-wdt";
-				clocks = <&coreclk 2>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x8>;
-			};
-
-			audio_controller: audio-controller@30000 {
-				compatible = "marvell,armada370-audio";
-				reg = <0x30000 0x4000>;
-				interrupts = <93>;
-				clocks = <&gateclk 0>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-375-db.dts b/src/arm/armada-375-db.dts
deleted file mode 100644
index 929ae00b4063..000000000000
--- a/src/arm/armada-375-db.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 375 evaluation board
- * (DB-88F6720)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-375.dtsi"
-
-/ {
-	model = "Marvell Armada 375 Development Board";
-	compatible = "marvell,a375-db", "marvell,armada375";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-				/*
-				 * SPI conflicts with NAND, so we disable it
-				 * here, and select NAND as the enabled device
-				 * by default.
-				 */
-				status = "disabled";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				sdio_st_pins: sdio-st-pins {
-					marvell,pins = "mpp44", "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-
-			nand: nand@d0000 {
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			usb@54000 {
-				status = "okay";
-			};
-
-			usb3@58000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@f0000 {
-				status = "okay";
-
-				eth0@c4000 {
-					status = "okay";
-					phy = <&phy0>;
-					phy-mode = "rgmii-id";
-				};
-
-				eth1@c5000 {
-					status = "okay";
-					phy = <&phy3>;
-					phy-mode = "gmii";
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-375.dtsi b/src/arm/armada-375.dtsi
deleted file mode 100644
index c1e49e7bf0fa..000000000000
--- a/src/arm/armada-375.dtsi
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 375 family SoC
- *
- * Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 375 family SoC";
-	compatible = "marvell,armada375";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-375-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0xc0054 0x4>;
-				clocks = <&gateclk 19>;
-			};
-
-			/* Network controller */
-			ethernet@f0000 {
-				compatible = "marvell,armada-375-pp2";
-				reg = <0xf0000 0xa000>, /* Packet Processor regs */
-				      <0xc0000 0x3060>, /* LMS regs */
-				      <0xc4000 0x100>,  /* eth0 regs */
-				      <0xc5000 0x100>;  /* eth1 regs */
-				clocks = <&gateclk 3>, <&gateclk 19>;
-				clock-names = "pp_clk", "gop_clk";
-				status = "disabled";
-
-				eth0: eth0@c4000 {
-					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
-					status = "disabled";
-				};
-
-				eth1: eth1@c5000 {
-					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
-					status = "disabled";
-				};
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6720-pinctrl";
-				reg = <0x18000 0x24>;
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp14",  "mpp15";
-					marvell,function = "i2c0";
-				};
-
-				i2c1_pins: i2c1-pins {
-					marvell,pins = "mpp61",  "mpp62";
-					marvell,function = "i2c1";
-				};
-
-				nand_pins: nand-pins {
-					marvell,pins = "mpp0", "mpp1", "mpp2",
-						"mpp3", "mpp4", "mpp5",
-						"mpp6", "mpp7", "mpp8",
-						"mpp9", "mpp10", "mpp11",
-						"mpp12", "mpp13";
-					marvell,function = "nand";
-				};
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp24",  "mpp25", "mpp26",
-						     "mpp27", "mpp28", "mpp29";
-					marvell,function = "sd";
-				};
-
-				spi0_pins: spi0-pins {
-					marvell,pins = "mpp0",  "mpp1", "mpp4",
-						     "mpp5", "mpp8", "mpp9";
-					marvell,function = "spi0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-375-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-375-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 0>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-375-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
-				clocks = <&coreclk 0>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			coherency-fabric@21010 {
-				compatible = "marvell,armada-375-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				status = "disabled";
-			};
-
-			usb@54000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x54000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			usb3@58000 {
-				compatible = "marvell,armada-375-xhci";
-				reg = <0x58000 0x20000>,<0x5b880 0x80>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 16>;
-				status = "disabled";
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 23>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			sata@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 14>, <&gateclk 20>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-
-			thermal@e8078 {
-				compatible = "marvell,armada375-thermal";
-				reg = <0xe8078 0x4>, <0xe807c 0x8>;
-				status = "okay";
-			};
-
-			coreclk: mvebu-sar@e8204 {
-				compatible = "marvell,armada-375-core-clock";
-				reg = <0xe8204 0x04>;
-				#clock-cells = <1>;
-			};
-
-			coredivclk: corediv-clock@e8250 {
-				compatible = "marvell,armada-375-corediv-clock";
-				reg = <0xe8250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-		};
-	};
-};
diff --git a/src/arm/armada-380.dtsi b/src/arm/armada-380.dtsi
deleted file mode 100644
index 4173a8ab34e7..000000000000
--- a/src/arm/armada-380.dtsi
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv88f6810-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-385-db.dts b/src/arm/armada-385-db.dts
deleted file mode 100644
index 1af886f1e486..000000000000
--- a/src/arm/armada-385-db.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "ok";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			sdhci@d8000 {
-				clock-frequency = <200000000>;
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-385-rd.dts b/src/arm/armada-385-rd.dts
deleted file mode 100644
index aaca2861dc87..000000000000
--- a/src/arm/armada-385-rd.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 Reference Design board
- * (RD-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Reference Design";
-	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * One PCIe units is accessible through
-			 * standard PCIe slot on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-385.dtsi b/src/arm/armada-385.dtsi
deleted file mode 100644
index 6283d7912f71..000000000000
--- a/src/arm/armada-385.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 385 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 385 family SoC";
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-38x.dtsi b/src/arm/armada-38x.dtsi
deleted file mode 100644
index 242d0ecc99f3..000000000000
--- a/src/arm/armada-38x.dtsi
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 38x family of SoCs.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 38x family SoC";
-	compatible = "marvell,armada380";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		eth0 = &eth0;
-		eth1 = &eth1;
-		eth2 = &eth2;
-	};
-
-	soc {
-		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
-		};
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <28>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-380-system-controller",
-					     "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-380-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18600 {
-				compatible = "marvell,armada-380-core-clock";
-				reg = <0x18600 0x04>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-380-timer",
-					     "marvell,armada-xp-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-380-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			mpcore-soc-ctrl@20d20 {
-				compatible = "marvell,armada-380-mpcore-soc-ctrl";
-				reg = <0x20d20 0x6c>;
-			};
-
-			coherency-fabric@21010 {
-				compatible = "marvell,armada-380-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			pmsu@22000 {
-				compatible = "marvell,armada-380-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			eth1: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x30000 0x4000>;
-				interrupts-extended = <&mpic 10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			eth2: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts-extended = <&mpic 12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x58000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				status = "disabled";
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts-extended = <&mpic 8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			sata@a8000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xa8000 0x2000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 15>;
-				status = "disabled";
-			};
-
-			sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-
-			coredivclk: clock@e4250 {
-				compatible = "marvell,armada-380-corediv-clock";
-				reg = <0xe4250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			thermal@e8078 {
-				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4074 0x4>;
-				status = "okay";
-			};
-
-			flash@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			sdhci@d8000 {
-				compatible = "marvell,armada-380-sdhci";
-				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
-				interrupts = <0 25 0x4>;
-				clocks = <&gateclk 17>;
-				mrvl,clk-delay-cycles = <0x1F>;
-				status = "disabled";
-			};
-
-			usb3@f0000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			usb3@f8000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-		};
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/src/arm/armada-xp-axpwifiap.dts b/src/arm/armada-xp-axpwifiap.dts
deleted file mode 100644
index a55a97a70505..000000000000
--- a/src/arm/armada-xp-axpwifiap.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Device Tree file for Marvell RD-AXPWiFiAP.
- *
- * Note: this board is shipped with a new generation boot loader that
- * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
- * used.
- *
- * Copyright (C) 2013 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Marvell RD-AXPWiFiAP";
-	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* First mini-PCIe port */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Renesas uPD720202 USB 3.0 controller */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				pinctrl-0 = <&pmx_phy_int>;
-				pinctrl-names = "default";
-
-				pmx_ge0: pmx-ge0 {
-					marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-						       "mpp4", "mpp5", "mpp6", "mpp7",
-						       "mpp8", "mpp9", "mpp10", "mpp11";
-					marvell,function = "ge0";
-				};
-
-				pmx_ge1: pmx-ge1 {
-					marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
-						       "mpp16", "mpp17", "mpp18", "mpp19",
-						       "mpp20", "mpp21", "mpp22", "mpp23";
-					marvell,function = "ge1";
-				};
-
-				pmx_keys: pmx-keys {
-					marvell,pins = "mpp33";
-					marvell,function = "gpio";
-				};
-
-				pmx_spi: pmx-spi {
-					marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
-					marvell,function = "spi";
-				};
-
-				pmx_phy_int: pmx-phy-int {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			serial@12100 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&pmx_ge0>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&pmx_ge1>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-				pinctrl-0 = <&pmx_spi>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Factory Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/src/arm/armada-xp-db.dts b/src/arm/armada-xp-db.dts
deleted file mode 100644
index 42ddb2864365..000000000000
--- a/src/arm/armada-xp-db.dts
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP evaluation board
- * (DB-78460-BP)
- *
- * Copyright (C) 2012-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-  *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * All 6 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-			pcie@3,0 {
-				/* Port 0, Lane 2 */
-				status = "okay";
-			};
-			pcie@4,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <25>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <27>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			usb@52000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-gp.dts b/src/arm/armada-xp-gp.dts
deleted file mode 100644
index 0478c55ca656..000000000000
--- a/src/arm/armada-xp-gp.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP development board
- * (DB-MV784MP-GP)
- *
- * Copyright (C) 2013-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
-	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		/*
-                 * 8 GB of plug-in RAM modules by default.The amount
-                 * of memory available can be changed by the
-                 * bootloader according the size of the module
-                 * actually plugged. However, memory between
-                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
-                 * the address range used for I/O (internal registers,
-                 * MBus windows).
-		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
-		      <0x00000001 0x00000000 0x00000001 0x00000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The 3 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <16>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <17>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <18>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <19>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "qsgmii";
-			};
-
-			/* Front-side USB slot */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Back-side USB slot */
-			usb@51000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-lenovo-ix4-300d.dts b/src/arm/armada-xp-lenovo-ix4-300d.dts
deleted file mode 100644
index 469cf7137595..000000000000
--- a/src/arm/armada-xp-lenovo-ix4-300d.dts
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Device Tree file for Lenovo Iomega ix4-300d
- *
- * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Lenovo Iomega ix4-300d";
-	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = "/soc/internal-regs/serial@12000";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Quad port sata: Marvell 88SX7042 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* USB 3.0 xHCI controller: NEC D720200F1 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				poweroff_pin: poweroff-pin {
-					marvell,pins = "mpp24";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp45";
-					marvell,function = "gpio";
-				};
-				select_button_pin: select-button-pin {
-					marvell,pins = "mpp41";
-					marvell,function = "gpio";
-				};
-
-				scroll_button_pin: scroll-button-pin {
-					marvell,pins = "mpp42";
-					marvell,function = "gpio";
-				};
-
-				hdd_led_pin: hdd-led-pin {
-					marvell,pins = "mpp26";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				adt7473@2e {
-					compatible = "adi,adt7473";
-					reg = <0x2e>;
-				};
-
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0xe0000>;
-					read-only;
-				};
-
-				partition@e0000 {
-					label = "u-boot-env";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env2";
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "zImage";
-					reg = <0x120000 0x400000>;
-				};
-
-				partition@520000 {
-					label = "initrd";
-					reg = <0x520000 0x400000>;
-				};
-
-				partition@xE00000 {
-					label = "boot";
-					reg = <0xE00000 0x3F200000>;
-				};
-
-				partition@flash {
-					label = "flash";
-					reg = <0x0 0x40000000>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin
-			&select_button_pin &scroll_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		select-button {
-			label = "Select Button";
-			linux,code = <BTN_SELECT>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		scroll-button {
-			label = "Scroll Button";
-			linux,code = <KEY_SCROLLDOWN>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		status = "okay";
-		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
-		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio_spi: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&hdd_led_pin>;
-		pinctrl-names = "default";
-
-		hdd-led {
-			label = "ix4-300d:hdd:blue";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		power-led {
-			label = "ix4-300d:power:white";
-			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			/* init blinking while booting */
-			linux,default-trigger = "timer";
-			default-state = "on";
-		};
-
-		sysfail-led {
-			label = "ix4-300d:sysfail:red";
-			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		sys-led {
-			label = "ix4-300d:sys:blue";
-			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		hddfail-led {
-			label = "ix4-300d:hddfail:red";
-			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-
-	/*
-	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
-	 * them up does the tweak) for poweroff to shutdown otherwise it
-	 * reboots
-	 */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_pin>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/src/arm/armada-xp-matrix.dts b/src/arm/armada-xp-matrix.dts
deleted file mode 100644
index 7e291e2ef4b3..000000000000
--- a/src/arm/armada-xp-matrix.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP Matrix board
- *
- * Copyright (C) 2013 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Matrix Board";
-	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		/*
-		 * This board has 4 GB of RAM, but the last 256 MB of
-		 * RAM are not usable due to the overlap with the MBus
-		 * Window address range
-		 */
-		reg = <0 0x00000000 0 0xf0000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-mv78230.dtsi b/src/arm/armada-xp-mv78230.dtsi
deleted file mode 100644
index 2592e1c13560..000000000000
--- a/src/arm/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78230-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-mv78260.dtsi b/src/arm/armada-xp-mv78260.dtsi
deleted file mode 100644
index 480e237a870f..000000000000
--- a/src/arm/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		eth3 = &eth3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78260-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-mv78460.dtsi b/src/arm/armada-xp-mv78460.dtsi
deleted file mode 100644
index 2c7b1fef4703..000000000000
--- a/src/arm/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		eth3 = &eth3;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie@10,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78460-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-netgear-rn2120.dts b/src/arm/armada-xp-netgear-rn2120.dts
deleted file mode 100644
index 0cf999abc4ed..000000000000
--- a/src/arm/armada-xp-netgear-rn2120.dts
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 2120
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 2120";
-	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to first Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to second Marvell 88SE9170 SATA controller */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				poweroff: poweroff {
-					marvell,pins = "mpp42";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp27";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp41";
-					marvell,function = "gpio";
-				};
-
-				sata1_led_pin: sata1-led-pin {
-					marvell,pins = "mpp31";
-					marvell,function = "gpio";
-				};
-
-				sata2_led_pin: sata2-led-pin {
-					marvell,pins = "mpp40";
-					marvell,function = "gpio";
-				};
-
-				sata3_led_pin: sata3-led-pin {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-
-				sata4_led_pin: sata4-led-pin {
-					marvell,pins = "mpp47";
-					marvell,function = "gpio";
-				};
-
-				sata1_power_pin: sata1-power-pin {
-					marvell,pins = "mpp24";
-					marvell,function = "gpio";
-				};
-
-				sata2_power_pin: sata2-power-pin {
-					marvell,pins = "mpp25";
-					marvell,function = "gpio";
-				};
-
-				sata3_power_pin: sata3-power-pin {
-					marvell,pins = "mpp26";
-					marvell,function = "gpio";
-				};
-
-				sata4_power_pin: sata4-power-pin {
-					marvell,pins = "mpp28";
-					marvell,function = "gpio";
-				};
-
-				sata1_pres_pin: sata1-pres-pin {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-
-				sata2_pres_pin: sata2-pres-pin {
-					marvell,pins = "mpp33";
-					marvell,function = "gpio";
-				};
-
-				sata3_pres_pin: sata3-pres-pin {
-					marvell,pins = "mpp34";
-					marvell,function = "gpio";
-				};
-
-				sata4_pres_pin: sata4-pres-pin {
-					marvell,pins = "mpp35";
-					marvell,function = "gpio";
-				};
-
-				err_led_pin: err-led-pin {
-					marvell,pins = "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <400000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isl,isl12057";
-					reg = <0x68>;
-				};
-
-				/* Controller for rear fan #1 of 3 (Protechnic
-				 * MGT4012XB-O20, 8000RPM) near eSATA port */
-				g762_fan1: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear (center) fan #2 of 3 */
-				g762_fan2: g762@48 {
-					compatible = "gmt,g762";
-					reg = <0x48>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear fan #3 of 3 */
-				g762_fan3: g762@49 {
-					compatible = "gmt,g762";
-					reg = <0x49>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/* Temperature sensor */
-				g751: g751@4c {
-					compatible = "gmt,g751";
-					reg = <0x4c>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
-			     &sata3_led_pin &sata4_led_pin>;
-		pinctrl-names = "default";
-
-		red-sata1-led {
-			label = "rn2120:red:sata1";
-			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata2-led {
-			label = "rn2120:red:sata2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata3-led {
-			label = "rn2120:red:sata3";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata4-led {
-			label = "rn2120:red:sata4";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-err-led {
-			label = "rn2120:red:err";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/src/arm/armada-xp-openblocks-ax3-4.dts b/src/arm/armada-xp-openblocks-ax3-4.dts
deleted file mode 100644
index 4e5a59ee1501..000000000000
--- a/src/arm/armada-xp-openblocks-ax3-4.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Device Tree file for OpenBlocks AX3-4 board
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78260.dtsi"
-
-/ {
-	model = "PlatHome OpenBlocks AX3-4 board";
-	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 128 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x8000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			pinctrl {
-				led_pins: led-pins-0 {
-					marvell,pins = "mpp49", "mpp51", "mpp53";
-					marvell,function = "gpio";
-				};
-			};
-			leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				red_led {
-					label = "red_led";
-					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				yellow_led {
-					label = "yellow_led";
-					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_led {
-					label = "green_led";
-					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-
-			gpio_keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				button@1 {
-					label = "Init Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-			};
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <400000>;
-			};
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <400000>;
-
-				s35390a: s35390a@30 {
-					compatible = "s35390a";
-					reg = <0x30>;
-				};
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			/* Front side USB 0 */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Front side USB 1 */
-			usb@51000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp.dtsi b/src/arm/armada-xp.dtsi
deleted file mode 100644
index bff9f6c18db1..000000000000
--- a/src/arm/armada-xp.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP family SoC";
-	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		eth2 = &eth2;
-	};
-
-	soc {
-		compatible = "marvell,armadaxp-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		internal-regs {
-			L2: l2-cache {
-				compatible = "marvell,aurora-system-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				wt-override;
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
-			serial@12200 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12200 0x100>;
-				reg-shift = <2>;
-				interrupts = <43>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-			serial@12300 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12300 0x100>;
-				reg-shift = <2>;
-				interrupts = <44>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-xp-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-xp-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal@182b0 {
-				compatible = "marvell,armadaxp-thermal";
-				reg = <0x182b0 0x4
-					0x184d0 0x4>;
-				status = "okay";
-			};
-
-			cpuclk: clock-complex@18700 {
-				#clock-cells = <1>;
-				compatible = "marvell,armada-xp-cpu-clock";
-				reg = <0x18700 0xA0>, <0x1c054 0x10>;
-				clocks = <&coreclk 1>;
-			};
-
-			interrupt-controller@20000 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-xp-wdt";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x20>;
-			};
-
-			eth2: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x30000 0x4000>;
-				interrupts = <12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x52000 0x500>;
-				interrupts = <47>;
-				clocks = <&gateclk 20>;
-				status = "disabled";
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@f0900 {
-				compatible = "marvell,orion-xor";
-				reg = <0xF0900 0x100
-				       0xF0B00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-	};
-
-	clocks {
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/src/arm/armv7-m.dtsi b/src/arm/armv7-m.dtsi
deleted file mode 100644
index 5a660d0faf42..000000000000
--- a/src/arm/armv7-m.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "skeleton.dtsi"
-
-/ {
-	nvic: nv-interrupt-controller  {
-		compatible = "arm,armv7m-nvic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xe000e100 0xc00>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&nvic>;
-		ranges;
-	};
-};
diff --git a/src/arm/atlas6-evb.dts b/src/arm/atlas6-evb.dts
deleted file mode 100644
index ab042ca8dea1..000000000000
--- a/src/arm/atlas6-evb.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "atlas6.dtsi"
-
-/ {
-	model = "CSR SiRFatlas6 Evaluation Board";
-	compatible = "sirf,atlas6-cb", "sirf,atlas6";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart@b0060000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins_a>;
-			};
-			spi@b00d0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins_a>;
-				spi@0 {
-					compatible = "spidev";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-			spi@b0170000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-			};
-			i2c0: i2c@b00e0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				lcd@40 {
-					compatible = "sirf,lcd";
-					reg = <0x40>;
-				};
-			};
-
-		};
-		disp-iobg {
-			lcd@90010000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcd_24pins_a>;
-			};
-		};
-	};
-	display: display@0 {
-	    panels {
-		panel0: panel@0 {
-			panel-name = "Innolux TFT";
-			hactive = <800>;
-			vactive = <480>;
-			left_margin = <20>;
-			right_margin = <234>;
-			upper_margin = <3>;
-			lower_margin = <41>;
-			hsync_len = <3>;
-			vsync_len = <2>;
-			pixclock = <33264000>;
-			sync = <3>;
-			timing = <0x88>;
-			};
-	    };
-	};
-};
diff --git a/src/arm/atlas6.dtsi b/src/arm/atlas6.dtsi
deleted file mode 100644
index bb22842a0826..000000000000
--- a/src/arm/atlas6.dtsi
+++ /dev/null
@@ -1,787 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,atlas6";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			clocks = <&clks 12>;
-			operating-points = <
-				/* kHz    uV */
-				200000  1025000
-				400000  1025000
-				600000  1050000
-				800000  1100000
-			>;
-			clock-latency = <150000>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <29>;
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clks: clock-controller@88000000 {
-				compatible = "sirf,atlas6-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-				#clock-cells = <1>;
-			};
-
-			rstc: reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-				#reset-cells = <1>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-
-			cphifbg@88030000 {
-				compatible = "sirf,prima2-cphifbg";
-				reg = <0x88030000 0x1000>;
-				clocks = <&clks 42>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x2000>;
-				interrupts = <27>;
-				clocks = <&clks 5>;
-			};
-
-			memc-monitor {
-				compatible = "sirf,prima2-memcmon";
-				reg = <0x90002000 0x200>;
-				interrupts = <4>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			lcd@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-				clocks = <&clks 34>;
-				display=<&display>;
-				/* later transfer to pwm */
-				bl-gpio = <&gpio 7 0>;
-				default-panel = <&panel0>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-				clocks = <&clks 35>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx510";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		graphics2d-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			ble@a0000000 {
-				compatible = "sirf,atlas6-ble";
-				reg = <0xa0000000 0x2000>;
-				interrupts = <5>;
-				clocks = <&clks 33>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-				resets = <&rstc 1>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-				clocks = <&clks 9>;
-				resets = <&rstc 2>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-				clocks = <&clks 8>;
-				resets = <&rstc 0>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>,
-			       <0x56000000 0x56000000 0x1b00000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-				clocks = <&clks 11>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-				clocks = <&clks 26>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-				clocks = <&clks 27>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x1000>;
-				interrupts = <17>;
-				fifosize = <128>;
-				clocks = <&clks 13>;
-				dmas = <&dmac1 5>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x1000>;
-				interrupts = <18>;
-				fifosize = <32>;
-				clocks = <&clks 14>;
-				dma-names = "no-rx", "no-tx";
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x1000>;
-				interrupts = <19>;
-				fifosize = <128>;
-				clocks = <&clks 15>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-				fifosize = <128>;
-				clocks = <&clks 28>;
-				dmas = <&dmac1 1>, <&dmac1 2>;
-				dma-names = "rx", "tx";
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-				fifosize = <128>;
-				clocks = <&clks 29>;
-				dmas = <&dmac0 14>, <&dmac0 15>;
-				dma-names = "rx", "tx";
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-				clocks = <&clks 24>;
-				#dma-cells = <1>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				#dma-cells = <1>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-				clocks = <&clks 31>;
-				interrupts = <14>;
-				sirf,vip-dma-rx-channel = <16>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac1 9>,
-				     <&dmac1 4>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 19>;
-				status = "disabled";
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac0 12>,
-				     <&dmac0 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 20>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 17>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 18>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-				clocks = <&clks 16>;
-			};
-
-			gpio: pinctrl@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas6-pinctrl";
-				reg = <0xb0120000 0x10000>;
-				interrupts = <43 44 45 46 47>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0@0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0@1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0@2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0@0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0@0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart0_noflow_pins_a: uart0@1 {
-					uart {
-						sirf,pins = "uart0_nostreamctrlgrp";
-						sirf,function = "uart0_nostreamctrl";
-					};
-				};
-				uart1_pins_a: uart1@0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2@0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2@1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0@0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1@0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0@0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1@0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-                                pwm0_pins_a: pwm0@0 {
-                                        pwm {
-                                                sirf,pins = "pwm0grp";
-                                                sirf,function = "pwm0";
-                                        };
-                                };
-                                pwm1_pins_a: pwm1@0 {
-                                        pwm {
-                                                sirf,pins = "pwm1grp";
-                                                sirf,function = "pwm1";
-                                        };
-                                };
-                                pwm2_pins_a: pwm2@0 {
-                                        pwm {
-                                                sirf,pins = "pwm2grp";
-                                                sirf,function = "pwm2";
-                                        };
-                                };
-                                pwm3_pins_a: pwm3@0 {
-                                        pwm {
-                                                sirf,pins = "pwm3grp";
-                                                sirf,function = "pwm3";
-                                        };
-                                };
-				pwm4_pins_a: pwm4@0 {
-                                        pwm {
-                                                sirf,pins = "pwm4grp";
-                                                sirf,function = "pwm4";
-                                        };
-                                };
-                                gps_pins_a: gps@0 {
-                                        gps {
-                                                sirf,pins = "gpsgrp";
-                                                sirf,function = "gps";
-                                        };
-                                };
-                                vip_pins_a: vip@0 {
-                                        vip {
-                                                sirf,pins = "vipgrp";
-                                                sirf,function = "vip";
-                                        };
-                                };
-                                sdmmc0_pins_a: sdmmc0@0 {
-                                        sdmmc0 {
-                                                sirf,pins = "sdmmc0grp";
-                                                sirf,function = "sdmmc0";
-                                        };
-                                };
-                                sdmmc1_pins_a: sdmmc1@0 {
-                                        sdmmc1 {
-                                                sirf,pins = "sdmmc1grp";
-                                                sirf,function = "sdmmc1";
-                                        };
-                                };
-                                sdmmc2_pins_a: sdmmc2@0 {
-                                        sdmmc2 {
-                                                sirf,pins = "sdmmc2grp";
-                                                sirf,function = "sdmmc2";
-                                        };
-                                };
-				sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
-                                        sdmmc2_nowp {
-                                                sirf,pins = "sdmmc2_nowpgrp";
-                                                sirf,function = "sdmmc2_nowp";
-                                        };
-                                };
-                                sdmmc3_pins_a: sdmmc3@0 {
-                                        sdmmc3 {
-                                                sirf,pins = "sdmmc3grp";
-                                                sirf,function = "sdmmc3";
-                                        };
-                                };
-                                sdmmc5_pins_a: sdmmc5@0 {
-                                        sdmmc5 {
-                                                sirf,pins = "sdmmc5grp";
-                                                sirf,function = "sdmmc5";
-                                        };
-                                };
-                                i2s_pins_a: i2s@0 {
-                                        i2s {
-                                                sirf,pins = "i2sgrp";
-                                                sirf,function = "i2s";
-                                        };
-                                };
-				i2s_no_din_pins_a: i2s_no_din@0 {
-                                        i2s_no_din {
-                                                sirf,pins = "i2s_no_dingrp";
-                                                sirf,function = "i2s_no_din";
-                                        };
-                                };
-				i2s_6chn_pins_a: i2s_6chn@0 {
-                                        i2s_6chn {
-                                                sirf,pins = "i2s_6chngrp";
-                                                sirf,function = "i2s_6chn";
-                                        };
-                                };
-                                ac97_pins_a: ac97@0 {
-                                        ac97 {
-                                                sirf,pins = "ac97grp";
-                                                sirf,function = "ac97";
-                                        };
-                                };
-                                nand_pins_a: nand@0 {
-                                        nand {
-                                                sirf,pins = "nandgrp";
-                                                sirf,function = "nand";
-                                        };
-                                };
-                                usp0_pins_a: usp0@0 {
-                                        usp0 {
-                                                sirf,pins = "usp0grp";
-                                                sirf,function = "usp0";
-                                        };
-                                };
-				usp0_uart_nostreamctrl_pins_a: usp0@1 {
-                                        usp0 {
-                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
-                                                sirf,function = "usp0_uart_nostreamctrl";
-                                        };
-                                };
-				usp0_only_utfs_pins_a: usp0@2 {
-					usp0 {
-						sirf,pins = "usp0_only_utfs_grp";
-						sirf,function = "usp0_only_utfs";
-					};
-				};
-				usp0_only_urfs_pins_a: usp0@3 {
-					usp0 {
-						sirf,pins = "usp0_only_urfs_grp";
-						sirf,function = "usp0_only_urfs";
-					};
-				};
-                                usp1_pins_a: usp1@0 {
-                                        usp1 {
-                                                sirf,pins = "usp1grp";
-                                                sirf,function = "usp1";
-                                        };
-                                };
-				usp1_uart_nostreamctrl_pins_a: usp1@1 {
-                                        usp1 {
-                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
-                                                sirf,function = "usp1_uart_nostreamctrl";
-                                        };
-                                };
-                                usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
-                                        usb0_upli_drvbus {
-                                                sirf,pins = "usb0_upli_drvbusgrp";
-                                                sirf,function = "usb0_upli_drvbus";
-                                        };
-                                };
-                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
-                                        usb1_utmi_drvbus {
-                                                sirf,pins = "usb1_utmi_drvbusgrp";
-                                                sirf,function = "usb1_utmi_drvbus";
-                                        };
-                                };
-                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
-                                        usb1_dp_dn {
-                                                sirf,pins = "usb1_dp_dngrp";
-                                                sirf,function = "usb1_dp_dn";
-                                        };
-                                };
-                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
-                                        uart1_route_io_usb1 {
-                                                sirf,pins = "uart1_route_io_usb1grp";
-                                                sirf,function = "uart1_route_io_usb1";
-                                        };
-                                };
-                                warm_rst_pins_a: warm_rst@0 {
-                                        warm_rst {
-                                                sirf,pins = "warm_rstgrp";
-                                                sirf,function = "warm_rst";
-                                        };
-                                };
-                                pulse_count_pins_a: pulse_count@0 {
-                                        pulse_count {
-                                                sirf,pins = "pulse_countgrp";
-                                                sirf,function = "pulse_count";
-                                        };
-                                };
-                                cko0_pins_a: cko0@0 {
-                                        cko0 {
-                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0";
-                                        };
-                                };
-                                cko1_pins_a: cko1@0 {
-                                        cko1 {
-                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1";
-                                        };
-                                };
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-				clocks = <&clks 21>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-				clocks = <&clks 22>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-				clocks = <&clks 23>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-					bus-width = <8>;
-					clocks = <&clks 36>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 36>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 38>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			minigpsrtc@2000 {
-				compatible = "sirf,prima2-minigpsrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-				clocks = <&clks 40>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-				clocks = <&clks 41>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-				clocks = <&clks 7>;
-			};
-		};
-	};
-};
diff --git a/src/arm/axm5516-amarillo.dts b/src/arm/axm5516-amarillo.dts
deleted file mode 100644
index a9d60471d9ff..000000000000
--- a/src/arm/axm5516-amarillo.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/boot/dts/axm5516-amarillo.dts
- *
- * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-
-/memreserve/ 0x00000000 0x00400000;
-
-#include "axm55xx.dtsi"
-#include "axm5516-cpus.dtsi"
-
-/ {
-	model = "Amarillo AXM5516";
-	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0x02 0x00000000>;
-	};
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
diff --git a/src/arm/axm5516-cpus.dtsi b/src/arm/axm5516-cpus.dtsi
deleted file mode 100644
index b85f360cb125..000000000000
--- a/src/arm/axm5516-cpus.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * arch/arm/boot/dts/axm5516-cpus.dtsi
- *
- * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-				core1 {
-					cpu = <&CPU1>;
-				};
-				core2 {
-					cpu = <&CPU2>;
-				};
-				core3 {
-					cpu = <&CPU3>;
-				};
-			};
-			cluster1 {
-				core0 {
-					cpu = <&CPU4>;
-				};
-				core1 {
-					cpu = <&CPU5>;
-				};
-				core2 {
-					cpu = <&CPU6>;
-				};
-				core3 {
-					cpu = <&CPU7>;
-				};
-			};
-			cluster2 {
-				core0 {
-					cpu = <&CPU8>;
-				};
-				core1 {
-					cpu = <&CPU9>;
-				};
-				core2 {
-					cpu = <&CPU10>;
-				};
-				core3 {
-					cpu = <&CPU11>;
-				};
-			};
-			cluster3 {
-				core0 {
-					cpu = <&CPU12>;
-				};
-				core1 {
-					cpu = <&CPU13>;
-				};
-				core2 {
-					cpu = <&CPU14>;
-				};
-				core3 {
-					cpu = <&CPU15>;
-				};
-			};
-		};
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x00>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x01>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x02>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x03>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x100>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x101>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x102>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x103>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU8: cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x200>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU9: cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x201>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU10: cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x202>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU11: cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x203>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU12: cpu@300 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x300>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU13: cpu@301 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x301>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU14: cpu@302 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x302>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU15: cpu@303 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x303>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-	};
-};
diff --git a/src/arm/axm55xx.dtsi b/src/arm/axm55xx.dtsi
deleted file mode 100644
index ea288f0a1d39..000000000000
--- a/src/arm/axm55xx.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * arch/arm/boot/dts/axm55xx.dtsi
- *
- * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/lsi,axm5516-clks.h>
-
-#include "skeleton64.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0	  = &serial0;
-		serial1   = &serial1;
-		serial2	  = &serial2;
-		serial3	  = &serial3;
-		timer	  = &timer0;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		clk_ref0: clk_ref0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clk_ref1: clk_ref1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clk_ref2: clk_ref2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clks: clock-controller@2010020000 {
-			compatible = "lsi,axm5516-clks";
-			#clock-cells = <1>;
-			reg = <0x20 0x10020000 0 0x20000>;
-		};
-	};
-
-	gic: interrupt-controller@2001001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x20 0x01001000 0 0x1000>,
-		      <0x20 0x01002000 0 0x1000>,
-		      <0x20 0x01004000 0 0x2000>,
-		      <0x20 0x01006000 0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		device_type = "soc";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		interrupt-parent = <&gic>;
-		ranges;
-
-		syscon: syscon@2010030000 {
-			compatible = "lsi,axxia-syscon", "syscon";
-			reg = <0x20 0x10030000 0 0x2000>;
-		};
-
-		reset: reset@2010031000 {
-			compatible = "lsi,axm55xx-reset";
-			syscon = <&syscon>;
-		};
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			serial0: uart@2010080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10080000 0 0x1000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial1: uart@2010081000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10081000 0 0x1000>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial2: uart@2010082000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10082000 0 0x1000>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial3: uart@2010083000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10083000 0 0x1000>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			timer0: timer@2010091000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x20 0x10091000 0 0x1000>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "okay";
-			};
-
-			gpio0: gpio@2010092000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0x20 0x10092000 0x00 0x1000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			gpio1: gpio@2010093000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0x20 0x10093000 0x00 0x1000>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-		};
-	};
-};
-
-/*
-  Local Variables:
-  mode: C
-  End:
-*/
diff --git a/src/arm/bcm11351-brt.dts b/src/arm/bcm11351-brt.dts
deleted file mode 100644
index 396b70459cdc..000000000000
--- a/src/arm/bcm11351-brt.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2012 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM11351 BRT board";
-	compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 0>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/src/arm/bcm11351.dtsi b/src/arm/bcm11351.dtsi
deleted file mode 100644
index 2ddaa5136611..000000000000
--- a/src/arm/bcm11351.dtsi
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm281xx.h"
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "BCM11351 SoC";
-	compatible = "brcm,bcm11351";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x3500417c>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@0x3404c000 {
-		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
-		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e003000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e003000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: l2-cache {
-		compatible = "brcm,bcm11351-a2-pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	watchdog@35002f40 {
-		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
-		reg = <0x35002f40 0x6c>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x10000>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x10000>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x10000>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x10000>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	pinctrl@35004800 {
-		compatible = "brcm,bcm11351-pinctrl";
-		reg = <0x35004800 0x430>;
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x80>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x80>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x80>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3500d000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3500d000 0x80>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
-		status = "disabled";
-	};
-
-	pwm: pwm@3e01a000 {
-		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-		reg = <0x3e01a000 0xcc>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		root_ccu: root_ccu {
-			compatible = "brcm,bcm11351-root-ccu";
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		hub_ccu: hub_ccu {
-			compatible = "brcm,bcm11351-hub-ccu";
-			reg = <0x34000000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "tmon_1m";
-		};
-
-		aon_ccu: aon_ccu {
-			compatible = "brcm,bcm11351-aon-ccu";
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer",
-					     "pmu_bsc",
-					     "pmu_bsc_var";
-		};
-
-		master_ccu: master_ccu {
-			compatible = "brcm,bcm11351-master-ccu";
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "usb_ic",
-					     "hsic2_48m",
-					     "hsic2_12m";
-		};
-
-		slave_ccu: slave_ccu {
-			compatible = "brcm,bcm11351-slave-ccu";
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "uartb4",
-					     "ssp0",
-					     "ssp2",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "pwm";
-		};
-
-		ref_1m_clk: ref_1m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <1000000>;
-		};
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_cx40_clk: ref_cx40 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <40000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-			#clock-cells = <0>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		ref_208m_clk: ref_208m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-
-		var_208m_clk: var_208m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-
-		ref_312m_clk: ref_312m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <312000000>;
-		};
-
-		var_312m_clk: var_312m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <312000000>;
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/bcm21664-garnet.dts b/src/arm/bcm21664-garnet.dts
deleted file mode 100644
index e87cb26ddf84..000000000000
--- a/src/arm/bcm21664-garnet.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm21664.dtsi"
-
-/ {
-	model = "BCM21664 Garnet board";
-	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/src/arm/bcm21664.dtsi b/src/arm/bcm21664.dtsi
deleted file mode 100644
index 2016b72a8fb7..000000000000
--- a/src/arm/bcm21664.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm21664.h"
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "BCM21664 SoC";
-	compatible = "brcm,bcm21664";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-       cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x35004178>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@0x3404e000 {
-		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
-		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: l2-cache {
-		compatible = "arm,pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1c>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x524>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x801c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x801c>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x801c>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x801c>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x70>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x70>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x70>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3e01c000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e01c000 0x70>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		master_ccu: master_ccu {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-
-		slave_ccu: slave_ccu {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/bcm28155-ap.dts b/src/arm/bcm28155-ap.dts
deleted file mode 100644
index 9ce91dd60cb6..000000000000
--- a/src/arm/bcm28155-ap.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM28155 AP board";
-	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e017000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e018000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3500d000 {
-		status="okay";
-		clock-frequency = <100000>;
-
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
-
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/bcm2835-rpi-b.dts b/src/arm/bcm2835-rpi-b.dts
deleted file mode 100644
index 2a3b1c1313a0..000000000000
--- a/src/arm/bcm2835-rpi-b.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/dts-v1/;
-/include/ "bcm2835.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-	model = "Raspberry Pi Model B";
-
-	memory {
-		reg = <0 0x10000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		act {
-			label = "ACT";
-			gpios = <&gpio 16 1>;
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpioout &alt0 &alt3>;
-
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <1>; /* GPIO out */
-	};
-
-	alt0: alt0 {
-		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
-		brcm,function = <4>; /* alt0 */
-	};
-
-	alt3: alt3 {
-		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <7>; /* alt3 */
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&sdhci {
-	status = "okay";
-	bus-width = <4>;
-};
diff --git a/src/arm/bcm2835.dtsi b/src/arm/bcm2835.dtsi
deleted file mode 100644
index b8473c43e888..000000000000
--- a/src/arm/bcm2835.dtsi
+++ /dev/null
@@ -1,182 +0,0 @@
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	interrupt-parent = <&intc>;
-
-	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x7e000000 0x20000000 0x02000000>;
-
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			clock-frequency = <1000000>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     <1 27>,
-				     <1 28>;
-
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm-wdt";
-			reg = <0x7e100000 0x28>;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-		};
-
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
-			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart@7e201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
-
-			dmas = <&dma 2>,
-			       <&dma 3>;
-			dma-names = "tx", "rx";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
-			interrupts = <2 22>;
-			clocks = <&clk_spi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@20205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sdhci: sdhci@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-		};
-
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
-		};
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk_mmc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc";
-			clock-frequency = <100000000>;
-		};
-
-		clk_i2c: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-output-names = "i2c";
-			clock-frequency = <250000000>;
-		};
-
-		clk_spi: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-output-names = "spi";
-			clock-frequency = <250000000>;
-		};
-	};
-};
diff --git a/src/arm/bcm4708-netgear-r6250.dts b/src/arm/bcm4708-netgear-r6250.dts
deleted file mode 100644
index 3b5259de5a38..000000000000
--- a/src/arm/bcm4708-netgear-r6250.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for Netgear R6250 V1
- *
- * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	compatible = "netgear,r6250v1", "brcm,bcm4708";
-	model = "Netgear R6250 V1 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	chipcommonA {
-		uart0: serial@0300 {
-			status = "okay";
-		};
-
-		uart1: serial@0400 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/bcm4708.dtsi b/src/arm/bcm4708.dtsi
deleted file mode 100644
index 31141e83fedd..000000000000
--- a/src/arm/bcm4708.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for BCM4708 SoC.
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include "bcm5301x.dtsi"
-
-/ {
-	compatible = "brcm,bcm4708";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-	};
-
-};
diff --git a/src/arm/bcm5301x.dtsi b/src/arm/bcm5301x.dtsi
deleted file mode 100644
index 53c624f766b4..000000000000
--- a/src/arm/bcm5301x.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	chipcommonA {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@0300 {
-			compatible = "ns16550";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart1: serial@0400 {
-			compatible = "ns16550";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-	};
-
-	mpcore {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19020000 0x00003000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		scu@0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x0000 0x100>;
-		};
-
-		timer@0200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
-		};
-
-		local-timer@0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
-		};
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x0100 0x100>;
-		};
-
-		L2: cache-controller@2000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x2000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* As long as we do not have a real clock driver us this
-		 * fixed clock */
-		clk_periph: periph {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-};
diff --git a/src/arm/bcm59056.dtsi b/src/arm/bcm59056.dtsi
deleted file mode 100644
index 066adfb10bd5..000000000000
--- a/src/arm/bcm59056.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*
-* This program is free software; you can redistribute it and/or modify it
-* under  the terms of the GNU General  Public License as published by the
-* Free Software Foundation;  either version 2 of the License, or (at your
-* option) any later version.
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/src/arm/bcm7445-bcm97445svmb.dts b/src/arm/bcm7445-bcm97445svmb.dts
deleted file mode 100644
index 9eec2ac1112f..000000000000
--- a/src/arm/bcm7445-bcm97445svmb.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-/dts-v1/;
-#include "bcm7445.dtsi"
-
-/ {
-	model = "Broadcom STB (bcm7445), SVMB reference board";
-	compatible = "brcm,bcm7445", "brcm,brcmstb";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00 0x00000000 0x00 0x40000000>,
-		      <0x00 0x40000000 0x00 0x40000000>,
-		      <0x00 0x80000000 0x00 0x40000000>;
-	};
-};
diff --git a/src/arm/bcm7445.dtsi b/src/arm/bcm7445.dtsi
deleted file mode 100644
index 0ca0f4e523d0..000000000000
--- a/src/arm/bcm7445.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "Broadcom STB (bcm7445)";
-	compatible = "brcm,bcm7445", "brcm,brcmstb";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <3>;
-		};
-	};
-
-	gic: interrupt-controller@ffd00000 {
-		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
-		reg = <0x00 0xffd01000 0x00 0x1000>,
-		      <0x00 0xffd02000 0x00 0x2000>,
-		      <0x00 0xffd04000 0x00 0x2000>,
-		      <0x00 0xffd06000 0x00 0x2000>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	rdb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0x00 0xf0000000 0x1000000>;
-
-		serial@40ab00 {
-			compatible = "ns16550a";
-			reg = <0x40ab00 0x20>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0x4d3f640>;
-		};
-
-		sun_top_ctrl: syscon@404000 {
-			compatible = "brcm,bcm7445-sun-top-ctrl",
-				     "syscon";
-			reg = <0x404000 0x51c>;
-		};
-
-		hif_cpubiuctrl: syscon@3e2400 {
-			compatible = "brcm,bcm7445-hif-cpubiuctrl",
-				     "syscon";
-			reg = <0x3e2400 0x5b4>;
-		};
-
-		hif_continuation: syscon@452000 {
-			compatible = "brcm,bcm7445-hif-continuation",
-				     "syscon";
-			reg = <0x452000 0x100>;
-		};
-	};
-
-	smpboot {
-		compatible = "brcm,brcmstb-smpboot";
-		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
-		syscon-cont = <&hif_continuation>;
-	};
-
-	reboot {
-		compatible = "brcm,brcmstb-reboot";
-		syscon = <&sun_top_ctrl 0x304 0x308>;
-	};
-};
diff --git a/src/arm/berlin2-sony-nsz-gs7.dts b/src/arm/berlin2-sony-nsz-gs7.dts
deleted file mode 100644
index c72bfd468d10..000000000000
--- a/src/arm/berlin2-sony-nsz-gs7.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Device Tree file for Sony NSZ-GS7
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "berlin2.dtsi"
-
-/ {
-	model = "Sony NSZ-GS7";
-	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-};
-
-&uart0 { status = "okay"; };
diff --git a/src/arm/berlin2.dtsi b/src/arm/berlin2.dtsi
deleted file mode 100644
index 9d7c810ebd0b..000000000000
--- a/src/arm/berlin2.dtsi
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * based on GPL'ed 2.6 kernel sources
- *  (c) Marvell International Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/berlin2.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "Marvell Armada 1500 (BG2) SoC";
-	compatible = "marvell,berlin2", "marvell,berlin";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,berlin-smp";
-
-		cpu@0 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <1>;
-		};
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&gic>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-
-		l2: l2-cache-controller@ac0000 {
-			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		scu: snoop-control-unit@ad0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xad0000 0x58>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_TWD>;
-		};
-
-		cpu-ctrl@dd0000 {
-			compatible = "marvell,berlin-cpu-ctrl";
-			reg = <0xdd0000 0x10000>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@0400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@0800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@0c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3000 0xc00>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2-chip-ctrl";
-			#clock-cells = <1>;
-			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			sm_gpio1: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			sm_gpio0: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <11>;
-				};
-			};
-
-			uart0: serial@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: serial@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart2: serial@b000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xb000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <10>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart2_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2-system-ctrl";
-				reg = <0xd000 0x100>;
-
-				uart0_pmux: uart0-pmux {
-					groups = "GSM4";
-					function = "uart0";
-				};
-
-				uart1_pmux: uart1-pmux {
-					groups = "GSM5";
-					function = "uart1";
-				};
-
-				uart2_pmux: uart2-pmux {
-					groups = "GSM3";
-					function = "uart2";
-				};
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x400>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/src/arm/berlin2cd-google-chromecast.dts b/src/arm/berlin2cd-google-chromecast.dts
deleted file mode 100644
index bcd81ffc495d..000000000000
--- a/src/arm/berlin2cd-google-chromecast.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Device Tree file for Google Chromecast
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "berlin2cd.dtsi"
-
-/ {
-	model = "Google Chromecast";
-	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&uart0 { status = "okay"; };
diff --git a/src/arm/berlin2cd.dtsi b/src/arm/berlin2cd.dtsi
deleted file mode 100644
index cc1df65da504..000000000000
--- a/src/arm/berlin2cd.dtsi
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * based on GPL'ed 2.6 kernel sources
- *  (c) Marvell International Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/berlin2.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "Marvell Armada 1500-mini (BG2CD) SoC";
-	compatible = "marvell,berlin2cd", "marvell,berlin";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&gic>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-
-		l2: l2-cache-controller@ac0000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_TWD>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@0400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@0800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@0c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3000 0xc00>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2cd-chip-ctrl";
-			#clock-cells = <1>;
-			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
-
-			uart0_pmux: uart0-pmux {
-				groups = "G6";
-				function = "uart0";
-			};
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			sm_gpio1: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			sm_gpio0: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			uart0: serial@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: serial@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				status = "disabled";
-			};
-
-			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2cd-system-ctrl";
-				reg = <0xd000 0x100>;
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x400>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/src/arm/berlin2q-marvell-dmp.dts b/src/arm/berlin2q-marvell-dmp.dts
deleted file mode 100644
index a357ce02a64e..000000000000
--- a/src/arm/berlin2q-marvell-dmp.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "berlin2q.dtsi"
-
-/ {
-	model = "Marvell BG2-Q DMP";
-	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>;
-	};
-
-	choosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-};
-
-&sdhci1 {
-	broken-cd;
-	sdhci,wp-inverted;
-	status = "okay";
-};
-
-&sdhci2 {
-	non-removable;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/berlin2q.dtsi b/src/arm/berlin2q.dtsi
deleted file mode 100644
index 400c40fceccc..000000000000
--- a/src/arm/berlin2q.dtsi
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/berlin2q.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
-	compatible = "marvell,berlin2q", "marvell,berlin";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,berlin-smp";
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <3>;
-		};
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-		interrupt-parent = <&gic>;
-
-		sdhci0: sdhci@ab0000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci1: sdhci@ab0800 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0800 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci2: sdhci@ab1000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab1000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SDIO1XIN>;
-			status = "disabled";
-		};
-
-		l2: l2-cache-controller@ac0000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-level = <2>;
-			arm,data-latency = <2 2 2>;
-			arm,tag-latency = <2 2 2>;
-		};
-
-		scu: snoop-control-unit@ad0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xad0000 0x58>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			clocks = <&chip CLKID_TWD>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		cpu-ctrl@dd0000 {
-			compatible = "marvell,berlin-cpu-ctrl";
-			reg = <0xdd0000 0x10000>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@0400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@0800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@0c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			i2c0: i2c@1400 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1400 0x100>;
-				interrupt-parent = <&aic>;
-				interrupts = <4>;
-				clocks = <&chip CLKID_CFG>;
-				pinctrl-0 = <&twsi0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c1: i2c@1800 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1800 0x100>;
-				interrupt-parent = <&aic>;
-				interrupts = <5>;
-				clocks = <&chip CLKID_CFG>;
-				pinctrl-0 = <&twsi1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				interrupts = <8>;
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3800 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3800 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio4: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			gpio5: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2q-chip-ctrl";
-			#clock-cells = <1>;
-			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
-
-			twsi0_pmux: twsi0-pmux {
-				groups = "G6";
-				function = "twsi0";
-			};
-
-			twsi1_pmux: twsi1-pmux {
-				groups = "G7";
-				function = "twsi1";
-			};
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			i2c2: i2c@7000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x7000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <6>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&twsi2_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c3: i2c@8000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x8000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <7>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&twsi3_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart0: uart@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				reg-shift = <2>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: uart@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				reg-shift = <2>;
-				pinctrl-0 = <&uart1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sysctrl: pin-controller@d000 {
-				compatible = "marvell,berlin2q-system-ctrl";
-				reg = <0xd000 0x100>;
-
-				uart0_pmux: uart0-pmux {
-					groups = "GSM12";
-					function = "uart0";
-				};
-
-				uart1_pmux: uart1-pmux {
-					groups = "GSM14";
-					function = "uart1";
-				};
-
-				twsi2_pmux: twsi2-pmux {
-					groups = "GSM13";
-					function = "twsi2";
-				};
-
-				twsi3_pmux: twsi3-pmux {
-					groups = "GSM14";
-					function = "twsi3";
-				};
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/src/arm/cros-ec-keyboard.dtsi b/src/arm/cros-ec-keyboard.dtsi
deleted file mode 100644
index 9c7fb0acae79..000000000000
--- a/src/arm/cros-ec-keyboard.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Keyboard dts fragment for devices that use cros-ec-keyboard
- *
- * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/input/input.h>
-
-&cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb";
-		keypad,num-rows = <8>;
-		keypad,num-columns = <13>;
-		google,needs-ghost-filter;
-
-		linux,keymap = <
-			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
-			MATRIX_KEY(0x00, 0x02, KEY_F1)
-			MATRIX_KEY(0x00, 0x03, KEY_B)
-			MATRIX_KEY(0x00, 0x04, KEY_F10)
-			MATRIX_KEY(0x00, 0x06, KEY_N)
-			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
-			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
-
-			MATRIX_KEY(0x01, 0x01, KEY_ESC)
-			MATRIX_KEY(0x01, 0x02, KEY_F4)
-			MATRIX_KEY(0x01, 0x03, KEY_G)
-			MATRIX_KEY(0x01, 0x04, KEY_F7)
-			MATRIX_KEY(0x01, 0x06, KEY_H)
-			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
-			MATRIX_KEY(0x01, 0x09, KEY_F9)
-			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
-
-			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
-			MATRIX_KEY(0x02, 0x01, KEY_TAB)
-			MATRIX_KEY(0x02, 0x02, KEY_F3)
-			MATRIX_KEY(0x02, 0x03, KEY_T)
-			MATRIX_KEY(0x02, 0x04, KEY_F6)
-			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
-			MATRIX_KEY(0x02, 0x06, KEY_Y)
-			MATRIX_KEY(0x02, 0x07, KEY_102ND)
-			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
-			MATRIX_KEY(0x02, 0x09, KEY_F8)
-
-			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
-			MATRIX_KEY(0x03, 0x02, KEY_F2)
-			MATRIX_KEY(0x03, 0x03, KEY_5)
-			MATRIX_KEY(0x03, 0x04, KEY_F5)
-			MATRIX_KEY(0x03, 0x06, KEY_6)
-			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
-			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
-
-			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
-			MATRIX_KEY(0x04, 0x01, KEY_A)
-			MATRIX_KEY(0x04, 0x02, KEY_D)
-			MATRIX_KEY(0x04, 0x03, KEY_F)
-			MATRIX_KEY(0x04, 0x04, KEY_S)
-			MATRIX_KEY(0x04, 0x05, KEY_K)
-			MATRIX_KEY(0x04, 0x06, KEY_J)
-			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
-			MATRIX_KEY(0x04, 0x09, KEY_L)
-			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
-			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
-
-			MATRIX_KEY(0x05, 0x01, KEY_Z)
-			MATRIX_KEY(0x05, 0x02, KEY_C)
-			MATRIX_KEY(0x05, 0x03, KEY_V)
-			MATRIX_KEY(0x05, 0x04, KEY_X)
-			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
-			MATRIX_KEY(0x05, 0x06, KEY_M)
-			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
-			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
-			MATRIX_KEY(0x05, 0x09, KEY_DOT)
-			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
-
-			MATRIX_KEY(0x06, 0x01, KEY_1)
-			MATRIX_KEY(0x06, 0x02, KEY_3)
-			MATRIX_KEY(0x06, 0x03, KEY_4)
-			MATRIX_KEY(0x06, 0x04, KEY_2)
-			MATRIX_KEY(0x06, 0x05, KEY_8)
-			MATRIX_KEY(0x06, 0x06, KEY_7)
-			MATRIX_KEY(0x06, 0x08, KEY_0)
-			MATRIX_KEY(0x06, 0x09, KEY_9)
-			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
-			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
-			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
-
-			MATRIX_KEY(0x07, 0x01, KEY_Q)
-			MATRIX_KEY(0x07, 0x02, KEY_E)
-			MATRIX_KEY(0x07, 0x03, KEY_R)
-			MATRIX_KEY(0x07, 0x04, KEY_W)
-			MATRIX_KEY(0x07, 0x05, KEY_I)
-			MATRIX_KEY(0x07, 0x06, KEY_U)
-			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
-			MATRIX_KEY(0x07, 0x08, KEY_P)
-			MATRIX_KEY(0x07, 0x09, KEY_O)
-			MATRIX_KEY(0x07, 0x0b, KEY_UP)
-			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
-		>;
-	};
-};
diff --git a/src/arm/da850-enbw-cmc.dts b/src/arm/da850-enbw-cmc.dts
deleted file mode 100644
index e750ab9086d5..000000000000
--- a/src/arm/da850-enbw-cmc.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Device Tree for AM1808 EnBW CMC board
- *
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-/dts-v1/;
-#include "da850.dtsi"
-
-/ {
-	compatible = "enbw,cmc", "ti,da850";
-	model = "EnBW CMC";
-
-	soc {
-		serial0: serial@1c42000 {
-			status = "okay";
-		};
-		serial1: serial@1d0c000 {
-			status = "okay";
-		};
-		serial2: serial@1d0d000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/da850-evm.dts b/src/arm/da850-evm.dts
deleted file mode 100644
index 1e11e5a5f723..000000000000
--- a/src/arm/da850-evm.dts
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Device Tree for DA850 EVM board
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation, version 2.
- */
-/dts-v1/;
-#include "da850.dtsi"
-
-/ {
-	compatible = "ti,da850-evm", "ti,da850";
-	model = "DA850/AM1808/OMAP-L138 EVM";
-
-	soc {
-		pmx_core: pinmux@1c14120 {
-			status = "okay";
-		};
-		serial0: serial@1c42000 {
-			status = "okay";
-		};
-		serial1: serial@1d0c000 {
-			status = "okay";
-		};
-		serial2: serial@1d0d000 {
-			status = "okay";
-		};
-		rtc0: rtc@1c23000 {
-			status = "okay";
-		};
-		i2c0: i2c@1c22000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			tps: tps@48 {
-				reg = <0x48>;
-			};
-		};
-		wdt: wdt@1c21000 {
-			status = "okay";
-		};
-		mmc0: mmc@1c40000 {
-			max-frequency = <50000000>;
-			bus-width = <4>;
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins>;
-		};
-		spi1: spi@1f0e000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-			flash: m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p64";
-				spi-max-frequency = <30000000>;
-				reg = <0>;
-				partition@0 {
-					label = "U-Boot-SPL";
-					reg = <0x00000000 0x00010000>;
-					read-only;
-				};
-				partition@1 {
-					label = "U-Boot";
-					reg = <0x00010000 0x00080000>;
-					read-only;
-				};
-				partition@2 {
-					label = "U-Boot-Env";
-					reg = <0x00090000 0x00010000>;
-					read-only;
-				};
-				partition@3 {
-					label = "Kernel";
-					reg = <0x000a0000 0x00280000>;
-				};
-				partition@4 {
-					label = "Filesystem";
-					reg = <0x00320000 0x00400000>;
-				};
-				partition@5 {
-					label = "MAC-Address";
-					reg = <0x007f0000 0x00010000>;
-					read-only;
-				};
-			};
-		};
-		mdio: mdio@1e24000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mdio_pins>;
-			bus_freq = <2200000>;
-		};
-		eth0: ethernet@1e20000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mii_pins>;
-		};
-		gpio: gpio@1e26000 {
-			status = "okay";
-		};
-	};
-	nand_cs3@62000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_cs3_pins>;
-	};
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-};
-
-/include/ "tps6507x.dtsi"
-
-&tps {
-	vdcdc1_2-supply = <&vbat>;
-	vdcdc3-supply = <&vbat>;
-	vldo1_2-supply = <&vbat>;
-
-	regulators {
-		vdcdc1_reg: regulator@0 {
-			regulator-name = "VDCDC1_3.3V";
-			regulator-min-microvolt = <3150000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdcdc2_reg: regulator@1 {
-			regulator-name = "VDCDC2_3.3V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		vdcdc3_reg: regulator@2 {
-			regulator-name = "VDCDC3_1.2V";
-			regulator-min-microvolt = <950000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "LDO1_1.8V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <1890000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "LDO2_1.2V";
-			regulator-min-microvolt = <1140000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/src/arm/da850.dtsi b/src/arm/da850.dtsi
deleted file mode 100644
index b695548dbb4e..000000000000
--- a/src/arm/da850.dtsi
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	arm {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		intc: interrupt-controller {
-			compatible = "ti,cp-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <100>;
-			reg = <0xfffee000 0x2000>;
-		};
-	};
-	soc {
-		compatible = "simple-bus";
-		model = "da850";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x01c00000 0x400000>;
-		interrupt-parent = <&intc>;
-
-		pmx_core: pinmux@1c14120 {
-			compatible = "pinctrl-single";
-			reg = <0x14120 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,bit-per-mux;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0xf>;
-			status = "disabled";
-
-			nand_cs3_pins: pinmux_nand_pins {
-				pinctrl-single,bits = <
-					/* EMA_OE, EMA_WE */
-					0x1c 0x00110000  0x00ff0000
-					/* EMA_CS[4],EMA_CS[3]*/
-					0x1c 0x00000110  0x00000ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
-				>;
-			};
-			i2c0_pins: pinmux_i2c0_pins {
-				pinctrl-single,bits = <
-					/* I2C0_SDA,I2C0_SCL */
-					0x10 0x00002200 0x0000ff00
-				>;
-			};
-			mmc0_pins: pinmux_mmc_pins {
-				pinctrl-single,bits = <
-					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
-					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
-					 * MMCSD0_CMD    MMCSD0_CLK
-					 */
-					0x28 0x00222222  0x00ffffff
-				>;
-			};
-			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
-				pinctrl-single,bits = <
-					/* EPWM0A */
-					0xc 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
-				pinctrl-single,bits = <
-					/* EPWM0B */
-					0xc 0x00000020 0x000000f0
-				>;
-			};
-			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
-				pinctrl-single,bits = <
-					/* EPWM1A */
-					0x14 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
-				pinctrl-single,bits = <
-					/* EPWM1B */
-					0x14 0x00000020 0x000000f0
-				>;
-			};
-			ecap0_pins: pinmux_ecap0_pins {
-				pinctrl-single,bits = <
-					/* ECAP0_APWM0 */
-					0x8 0x20000000 0xf0000000
-				>;
-			};
-			ecap1_pins: pinmux_ecap1_pins {
-				pinctrl-single,bits = <
-					/* ECAP1_APWM1 */
-					0x4 0x40000000 0xf0000000
-				>;
-			};
-			ecap2_pins: pinmux_ecap2_pins {
-				pinctrl-single,bits = <
-					/* ECAP2_APWM2 */
-					0x4 0x00000004 0x0000000f
-				>;
-			};
-			spi1_pins: pinmux_spi_pins {
-				pinctrl-single,bits = <
-					/* SIMO, SOMI, CLK */
-					0x14 0x00110100 0x00ff0f00
-				>;
-			};
-			spi1_cs0_pin: pinmux_spi1_cs0 {
-				pinctrl-single,bits = <
-					/* CS0 */
-					0x14 0x00000010 0x000000f0
-				>;
-			};
-			mdio_pins: pinmux_mdio_pins {
-				pinctrl-single,bits = <
-					/* MDIO_CLK, MDIO_D */
-					0x10 0x00000088 0x000000ff
-				>;
-			};
-			mii_pins: pinmux_mii_pins {
-				pinctrl-single,bits = <
-					/*
-					 * MII_TXEN, MII_TXCLK, MII_COL
-					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
-					 * MII_TXD_0
-					 */
-					0x8 0x88888880 0xfffffff0
-					/*
-					 * MII_RXER, MII_CRS, MII_RXCLK
-					 * MII_RXDV, MII_RXD_3, MII_RXD_2
-					 * MII_RXD_1, MII_RXD_0
-					 */
-					0xc 0x88888888 0xffffffff
-				>;
-			};
-
-		};
-		serial0: serial@1c42000 {
-			compatible = "ns16550a";
-			reg = <0x42000 0x100>;
-			reg-shift = <2>;
-			interrupts = <25>;
-			status = "disabled";
-		};
-		serial1: serial@1d0c000 {
-			compatible = "ns16550a";
-			reg = <0x10c000 0x100>;
-			reg-shift = <2>;
-			interrupts = <53>;
-			status = "disabled";
-		};
-		serial2: serial@1d0d000 {
-			compatible = "ns16550a";
-			reg = <0x10d000 0x100>;
-			reg-shift = <2>;
-			interrupts = <61>;
-			status = "disabled";
-		};
-		rtc0: rtc@1c23000 {
-			compatible = "ti,da830-rtc";
-			reg = <0x23000 0x1000>;
-			interrupts = <19
-				      19>;
-			status = "disabled";
-		};
-		i2c0: i2c@1c22000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x22000 0x1000>;
-			interrupts = <15>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-		wdt: wdt@1c21000 {
-			compatible = "ti,davinci-wdt";
-			reg = <0x21000 0x1000>;
-			status = "disabled";
-		};
-		mmc0: mmc@1c40000 {
-			compatible = "ti,da830-mmc";
-			reg = <0x40000 0x1000>;
-			interrupts = <16>;
-			status = "disabled";
-		};
-		ehrpwm0: ehrpwm@01f00000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x300000 0x2000>;
-			status = "disabled";
-		};
-		ehrpwm1: ehrpwm@01f02000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x302000 0x2000>;
-			status = "disabled";
-		};
-		ecap0: ecap@01f06000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x306000 0x80>;
-			status = "disabled";
-		};
-		ecap1: ecap@01f07000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x307000 0x80>;
-			status = "disabled";
-		};
-		ecap2: ecap@01f08000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x308000 0x80>;
-			status = "disabled";
-		};
-		spi1: spi@1f0e000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "ti,da830-spi";
-			reg = <0x30e000 0x1000>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <1>;
-			interrupts = <56>;
-			status = "disabled";
-		};
-		mdio: mdio@1e24000 {
-			compatible = "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x224000 0x1000>;
-		};
-		eth0: ethernet@1e20000 {
-			compatible = "ti,davinci-dm6467-emac";
-			reg = <0x220000 0x4000>;
-			ti,davinci-ctrl-reg-offset = <0x3000>;
-			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
-			ti,davinci-ctrl-ram-offset = <0>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <33
-					34
-					35
-					36
-					>;
-		};
-		gpio: gpio@1e26000 {
-			compatible = "ti,dm6441-gpio";
-			gpio-controller;
-			reg = <0x226000 0x1000>;
-			interrupts = <42 IRQ_TYPE_EDGE_BOTH
-				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
-				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
-				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
-				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
-			ti,ngpio = <144>;
-			ti,davinci-gpio-unbanked = <0>;
-			status = "disabled";
-		};
-	};
-	nand_cs3@62000000 {
-		compatible = "ti,davinci-nand";
-		reg = <0x62000000 0x807ff
-		       0x68000000 0x8000>;
-		ti,davinci-chipselect = <1>;
-		ti,davinci-mask-ale = <0>;
-		ti,davinci-mask-cle = <0>;
-		ti,davinci-mask-chipsel = <0>;
-		ti,davinci-ecc-mode = "hw";
-		ti,davinci-ecc-bits = <4>;
-		ti,davinci-nand-use-bbt;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/dove-cm-a510.dts b/src/arm/dove-cm-a510.dts
deleted file mode 100644
index 50c0d6904497..000000000000
--- a/src/arm/dove-cm-a510.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Compulab CM-A510";
-	compatible = "compulab,cm-a510", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	  status = "okay";
-};
diff --git a/src/arm/dove-cubox-es.dts b/src/arm/dove-cubox-es.dts
deleted file mode 100644
index e28ef056dd17..000000000000
--- a/src/arm/dove-cubox-es.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-#include "dove-cubox.dts"
-
-/ {
-	model = "SolidRun CuBox (Engineering Sample)";
-	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
-};
-
-&sdio0 {
-	/* sdio0 card detect is connected to wrong pin on CuBox ES */
-	cd-gpios = <&gpio0 12 1>;
-	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
-};
diff --git a/src/arm/dove-cubox.dts b/src/arm/dove-cubox.dts
deleted file mode 100644
index aae7efc09b0b..000000000000
--- a/src/arm/dove-cubox.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "SolidRun CuBox";
-	compatible = "solidrun,cubox", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_18>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power";
-			gpios = <&gpio0 18 1>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
-	};
-
-	clocks {
-		/* 25MHz reference crystal */
-		ref25: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		pinctrl-0 = <&pmx_gpio_19>;
-		pinctrl-names = "default";
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&mdio { status = "okay"; };
-&eth { status = "okay"; };
-
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	si5351: clock-generator {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-
-		clkout2 {
-			reg = <2>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-	};
-};
-
-&sdio0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&audio1 {
-	status = "okay";
-	clocks = <&gate_clk 13>, <&si5351 2>;
-	clock-names = "internal", "extclk";
-	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
-	pinctrl-names = "default";
-};
diff --git a/src/arm/dove-d2plug.dts b/src/arm/dove-d2plug.dts
deleted file mode 100644
index c11d3636c8e5..000000000000
--- a/src/arm/dove-d2plug.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D2Plug";
-	compatible = "globalscale,d2plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 1 1>;
-		};
-
-		bluetooth-act {
-			label = "bt-act";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-&mdio { status = "okay"; };
-&eth { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	spi-flash@0 {
-		compatible = "st,m25l3205d";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
diff --git a/src/arm/dove-d3plug.dts b/src/arm/dove-d3plug.dts
deleted file mode 100644
index f5f59bb5a534..000000000000
--- a/src/arm/dove-d3plug.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D3Plug";
-	compatible = "globalscale,d3plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 1 1>;
-		};
-
-		status {
-			label = "status";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
-		compatible = "st,m25l1605d";
-		spi-max-frequency = <86000000>;
-		reg = <0>;
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* Fresco Logic USB3.0 xHCI controller */
-	pcie-port@0 {
-		status = "okay";
-		reset-gpios = <&gpio0 26 1>;
-		reset-delay-us = <20000>;
-		pinctrl-0 = <&pmx_camera_gpio>;
-		pinctrl-names = "default";
-	};
-	/* Mini-PCIe slot */
-	pcie-port@1 {
-		status = "okay";
-		reset-gpios = <&gpio0 25 1>;
-	};
-};
diff --git a/src/arm/dove-dove-db.dts b/src/arm/dove-dove-db.dts
deleted file mode 100644
index bb725dca3a10..000000000000
--- a/src/arm/dove-dove-db.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Marvell DB-MV88AP510-BP Development Board";
-	compatible = "marvell,dove-db", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	spi-flash@0 {
-		compatible = "st,m25p32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	  status = "okay";
-};
diff --git a/src/arm/dove.dtsi b/src/arm/dove.dtsi
deleted file mode 100644
index a5441d5482a6..000000000000
--- a/src/arm/dove.dtsi
+++ /dev/null
@@ -1,649 +0,0 @@
-/include/ "skeleton.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	compatible = "marvell,dove";
-	model = "Marvell Armada 88AP510 SoC";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "marvell,pj4a", "marvell,sheeva-v7";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-	};
-
-	l2: l2-cache {
-		compatible = "marvell,tauros2-cache";
-		marvell,tauros2-cache-features = <0>;
-	};
-
-	mbus {
-		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
-		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
-
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
-			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
-			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
-			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
-			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
-
-		pcie: pcie-controller {
-			compatible = "marvell,dove-pcie";
-			status = "disabled";
-			device_type = "pci";
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&intc>;
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
-			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
-				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
-				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
-				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
-				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
-
-			pcie-port@0 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				clocks = <&gate_clk 4>;
-				marvell,pcie-port = <0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
-			};
-
-			pcie-port@1 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				clocks = <&gate_clk 5>;
-				marvell,pcie-port = <1>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
-			};
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
-				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
-				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
-				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
-
-			spi0: spi-ctrl@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <6>;
-				reg = <0x10600 0x28>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_spi0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c0: i2c-ctrl@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <11>;
-				clock-frequency = <400000>;
-				timeout-ms = <1000>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <7>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <8>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_uart1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart2: serial@12200 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart3: serial@12300 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi-ctrl@14600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <5>;
-				reg = <0x14600 0x28>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			mbusc: mbus-ctrl@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x80>, <0x800100 0x8>;
-			};
-
-			sysc: system-ctrl@20000 {
-				compatible = "marvell,orion-system-controller";
-				reg = <0x20000 0x110>;
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <5>;
-			};
-
-			intc: main-interrupt-ctrl@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x10>, <0x20210 0x10>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
-				clocks = <&core_clk 0>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>, <0x20108 0x4>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <3>;
-				clocks = <&core_clk 0>;
-			};
-
-			crypto: crypto-engine@30000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x30000 0x10000>,
-				      <0xffffe000 0x800>;
-				reg-names = "regs", "sram";
-				interrupts = <31>;
-				clocks = <&gate_clk 15>;
-				status = "okay";
-			};
-
-			ehci0: usb-host@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <24>;
-				clocks = <&gate_clk 0>;
-				status = "okay";
-			};
-
-			ehci1: usb-host@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x1000>;
-				interrupts = <25>;
-				clocks = <&gate_clk 1>;
-				status = "okay";
-			};
-
-			xor0: dma-engine@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gate_clk 23>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <39>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <40>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			xor1: dma-engine@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gate_clk 24>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <42>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <43>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			sdio1: sdio-host@90000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x90000 0x100>;
-				interrupts = <36>, <38>;
-				clocks = <&gate_clk 9>;
-				pinctrl-0 = <&pmx_sdio1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			eth: ethernet-ctrl@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				clocks = <&gate_clk 2>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethernet-port@0 {
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <29>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <30>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
-			};
-
-			sdio0: sdio-host@92000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x92000 0x100>;
-				interrupts = <35>, <37>;
-				clocks = <&gate_clk 8>;
-				pinctrl-0 = <&pmx_sdio0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sata0: sata-host@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x2400>;
-				interrupts = <62>;
-				clocks = <&gate_clk 3>;
-				phys = <&sata_phy0>;
-				phy-names = "port0";
-				nr-ports = <1>;
-				status = "disabled";
-			};
-
-			sata_phy0: sata-phy@a2000 {
-				compatible = "marvell,mvebu-sata-phy";
-				reg = <0xa2000 0x0334>;
-				clocks = <&gate_clk 3>;
-				clock-names = "sata";
-				#phy-cells = <0>;
-				status = "ok";
-			};
-
-			audio0: audio-controller@b0000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb0000 0x2210>;
-				interrupts = <19>, <20>;
-				clocks = <&gate_clk 12>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			audio1: audio-controller@b4000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb4000 0x2210>;
-				interrupts = <21>, <22>;
-				clocks = <&gate_clk 13>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			thermal: thermal-diode@d001c {
-				compatible = "marvell,dove-thermal";
-				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-			};
-
-			gate_clk: clock-gating-ctrl@d0038 {
-				compatible = "marvell,dove-gating-clock";
-				reg = <0xd0038 0x4>;
-				clocks = <&core_clk 0>;
-				#clock-cells = <1>;
-			};
-
-			pinctrl: pin-ctrl@d0200 {
-				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x14>,
-				      <0xd0440 0x04>;
-				clocks = <&gate_clk 22>;
-
-				pmx_gpio_0: pmx-gpio-0 {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_1: pmx-gpio-1 {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_2: pmx-gpio-2 {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_3: pmx-gpio-3 {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_4: pmx-gpio-4 {
-					marvell,pins = "mpp4";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_5: pmx-gpio-5 {
-					marvell,pins = "mpp5";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_6: pmx-gpio-6 {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_7: pmx-gpio-7 {
-					marvell,pins = "mpp7";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_8: pmx-gpio-8 {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_9: pmx-gpio-9 {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_10: pmx-gpio-10 {
-					marvell,pins = "mpp10";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_11: pmx-gpio-11 {
-					marvell,pins = "mpp11";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_12: pmx-gpio-12 {
-					marvell,pins = "mpp12";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_13: pmx-gpio-13 {
-					marvell,pins = "mpp13";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_extclk: pmx-audio1-extclk {
-					marvell,pins = "mpp13";
-					marvell,function = "audio1";
-				};
-
-				pmx_gpio_14: pmx-gpio-14 {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_15: pmx-gpio-15 {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_16: pmx-gpio-16 {
-					marvell,pins = "mpp16";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_17: pmx-gpio-17 {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_18: pmx-gpio-18 {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_19: pmx-gpio-19 {
-					marvell,pins = "mpp19";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_20: pmx-gpio-20 {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_21: pmx-gpio-21 {
-					marvell,pins = "mpp21";
-					marvell,function = "gpio";
-				};
-
-				pmx_camera: pmx-camera {
-					marvell,pins = "mpp_camera";
-					marvell,function = "camera";
-				};
-
-				pmx_camera_gpio: pmx-camera-gpio {
-					marvell,pins = "mpp_camera";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio0: pmx-sdio0 {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "sdio0";
-				};
-
-				pmx_sdio0_gpio: pmx-sdio0-gpio {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio1: pmx-sdio1 {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "sdio1";
-				};
-
-				pmx_sdio1_gpio: pmx-sdio1-gpio {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_gpio: pmx-audio1-gpio {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "i2s1/spdifo";
-				};
-
-				pmx_spi0: pmx-spi0 {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "spi0";
-				};
-
-				pmx_spi0_gpio: pmx-spi0-gpio {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "gpio";
-				};
-
-				pmx_uart1: pmx-uart1 {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "uart1";
-				};
-
-				pmx_uart1_gpio: pmx-uart1-gpio {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "gpio";
-				};
-
-				pmx_nand: pmx-nand {
-					marvell,pins = "mpp_nand";
-					marvell,function = "nand";
-				};
-
-				pmx_nand_gpo: pmx-nand-gpo {
-					marvell,pins = "mpp_nand";
-					marvell,function = "gpo";
-				};
-			};
-
-			core_clk: core-clocks@d0214 {
-				compatible = "marvell,dove-core-clock";
-				reg = <0xd0214 0x4>;
-				#clock-cells = <1>;
-			};
-
-			gpio0: gpio-ctrl@d0400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0400 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <12>, <13>, <14>, <60>;
-			};
-
-			gpio1: gpio-ctrl@d0420 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0420 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <61>;
-			};
-
-			rtc: real-time-clock@d8500 {
-				compatible = "marvell,orion-rtc";
-				reg = <0xd8500 0x20>;
-			};
-
-			gconf: global-config@e802c {
-				compatible = "marvell,dove-global-config",
-				             "syscon";
-				reg = <0xe802c 0x14>;
-			};
-
-			gpio2: gpio-ctrl@e8400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xe8400 0x0c>;
-				ngpios = <8>;
-			};
-
-			lcd1: lcd-controller@810000 {
-				compatible = "marvell,dove-lcd";
-				reg = <0x810000 0x1000>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			lcd0: lcd-controller@820000 {
-				compatible = "marvell,dove-lcd";
-				reg = <0x820000 0x1000>;
-				interrupts = <47>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/dra7-evm.dts b/src/arm/dra7-evm.dts
deleted file mode 100644
index 50f8022905a1..000000000000
--- a/src/arm/dra7-evm.dts
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "dra74x.dtsi"
-
-/ {
-	model = "TI DRA742";
-	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x60000000>; /* 1536 MB */
-	};
-
-	mmc2_3v3: fixedregulator-mmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc2_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&dra7_pmx_core {
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
-			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
-			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
-			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
-			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
-			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
-			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
-			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
-			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
-		>;
-	};
-
-	qspi1_pins: pinmux_qspi1_pins {
-		pinctrl-single,pins = <
-			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
-			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
-			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
-			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-                pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-                >;
-        };
-
-	usb2_pins: pinmux_usb2_pins {
-                pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-                >;
-        };
-
-	nand_flash_x16: nand_flash_x16 {
-		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
-		 * So NAND flash requires following switch settings:
-		 * SW5.9 (GPMC_WPN) = LOW
-		 * SW5.1 (NAND_BOOTn) = HIGH */
-		pinctrl-single,pins = <
-			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
-			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
-			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
-			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
-			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
-			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
-			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
-			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
-			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
-			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
-			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
-			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
-			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
-			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
-			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
-			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
-			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
-			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
-			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
-			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
-			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
-			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_GPU - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <12500000>;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* CORE_VDD */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1030000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_IVAHD */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDS1V8 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_RTCIO */
-					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <3400000>;
-};
-
-&mcspi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-&mcspi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&mmc2_3v3>;
-	bus-width = <8>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00010000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x00150000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x00160000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x00170000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x00970000 0x01690000>;
-		};
-	};
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&usb2 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x16>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>;
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,we-on-ns = <5>;
-		gpmc,we-off-ns = <25>;
-		gpmc,oe-on-ns = <2>;
-		gpmc,oe-off-ns = <20>;
-		gpmc,access-ns = <20>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000c0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001c0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env";
-			reg = <0x001e0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x0f600000>;
-		};
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
diff --git a/src/arm/dra7.dtsi b/src/arm/dra7.dtsi
deleted file mode 100644
index 97f603c4483d..000000000000
--- a/src/arm/dra7.dtsi
+++ /dev/null
@@ -1,1268 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/dra.h>
-
-#include "skeleton.dtsi"
-
-#define MAX_SOURCES 400
-#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "ti,dra7xx";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		arm,routable-irqs = <192>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the SOC interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,dra7-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x1000000>,
-		      <0x45000000 0x1000>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
-
-		prm: prm@4ae06000 {
-			compatible = "ti,dra7-prm";
-			reg = <0x4ae06000 0x3000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		axi@0 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000
-				  0x0	     0x20000000 0x10000000>;
-			pcie@51000000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 232 0x4>, <0 233 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				ti,hwmods = "pcie1";
-				phys = <&pcie1_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
-						<0 0 0 2 &pcie1_intc 2>,
-						<0 0 0 3 &pcie1_intc 3>,
-						<0 0 0 4 &pcie1_intc 4>;
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		axi@1 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000
-				  0x0	     0x30000000 0x10000000>;
-			status = "disabled";
-			pcie@51000000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 355 0x4>, <0 356 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				ti,hwmods = "pcie2";
-				phys = <&pcie2_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
-						<0 0 0 2 &pcie2_intc 2>,
-						<0 0 0 3 &pcie2_intc 3>,
-						<0 0 0 4 &pcie2_intc 4>;
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		cm_core_aon: cm_core_aon@4a005000 {
-			compatible = "ti,dra7-cm-core-aon";
-			reg = <0x4a005000 0x2000>;
-
-			cm_core_aon_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_aon_clockdomains: clockdomains {
-			};
-		};
-
-		cm_core: cm_core@4a008000 {
-			compatible = "ti,dra7-cm-core";
-			reg = <0x4a008000 0x3000>;
-
-			cm_core_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0 0x4>;
-			syscon = <&dra7_ctrl_general>;
-			pbias_mmc_reg: pbias_mmc_omap5 {
-				regulator-name = "pbias_mmc_omap5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		dra7_pmx_core: pinmux@4a003400 {
-			compatible = "pinctrl-single";
-			reg = <0x4a003400 0x0464>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x3fffffff>;
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
-		};
-
-		gpio1: gpio@4ae10000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4ae10000 0x200>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio7: gpio@48051000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48051000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio7";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio8: gpio@48053000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48053000 0x200>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio8";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-                        status = "disabled";
-		};
-
-		uart5: serial@48066000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48066000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart6: serial@48068000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48068000 0x100>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart7: serial@48420000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48420000 0x100>;
-			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart7";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart8: serial@48422000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48422000 0x100>;
-			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart8";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart9: serial@48424000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48424000 0x100>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart9";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart10: serial@4ae2b000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4ae2b000 0x100>;
-			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart10";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		mailbox1: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			ti,hwmods = "mailbox1";
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-			status = "disabled";
-		};
-
-		mailbox2: mailbox@4883a000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883a000 0x200>;
-			ti,hwmods = "mailbox2";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox3: mailbox@4883c000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883c000 0x200>;
-			ti,hwmods = "mailbox3";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox4: mailbox@4883e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883e000 0x200>;
-			ti,hwmods = "mailbox4";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox5: mailbox@48840000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48840000 0x200>;
-			ti,hwmods = "mailbox5";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox6: mailbox@48842000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48842000 0x200>;
-			ti,hwmods = "mailbox6";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox7: mailbox@48844000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48844000 0x200>;
-			ti,hwmods = "mailbox7";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox8: mailbox@48846000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48846000 0x200>;
-			ti,hwmods = "mailbox8";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox9: mailbox@4885e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4885e000 0x200>;
-			ti,hwmods = "mailbox9";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox10: mailbox@48860000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48860000 0x200>;
-			ti,hwmods = "mailbox10";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox11: mailbox@48862000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48862000 0x200>;
-			ti,hwmods = "mailbox11";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox12: mailbox@48864000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48864000 0x200>;
-			ti,hwmods = "mailbox12";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox13: mailbox@48802000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48802000 0x200>;
-			ti,hwmods = "mailbox13";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		timer1: timer@4ae18000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4ae18000 0x80>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@48820000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48820000 0x80>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@48822000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48822000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer7: timer@48824000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48824000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@48826000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48826000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer9: timer@4803e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer13: timer@48828000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48828000 0x80>;
-			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer13";
-			status = "disabled";
-		};
-
-		timer14: timer@4882a000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882a000 0x80>;
-			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer14";
-			status = "disabled";
-		};
-
-		timer15: timer@4882c000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882c000 0x80>;
-			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer15";
-			status = "disabled";
-		};
-
-		timer16: timer@4882e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882e000 0x80>;
-			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer16";
-			status = "disabled";
-		};
-
-		wdt2: wdt@4ae14000 {
-			compatible = "ti,omap4-wdt";
-			reg = <0x4ae14000 0x80>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmm";
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			status = "disabled";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			status = "disabled";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			status = "disabled";
-		};
-
-		i2c4: i2c@4807a000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807a000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-			status = "disabled";
-		};
-
-		i2c5: i2c@4807c000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c5";
-			status = "disabled";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
-			      <0x4ae0c158 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1160000		0	0x4	0 0x02000000 0x01F00000
-			1210000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_ivahd: regulator-abb-ivahd {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_ivahd";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
-			      <0x4a002470 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x40000000>;
-			/* LDOVBBIVA_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBIVA_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_dspeve: regulator-abb-dspeve {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_dspeve";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
-			      <0x4a00246c 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x20000000>;
-			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBDSPEVE_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_gpu: regulator-abb-gpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_gpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
-			      <0x4ae0c154 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x10000000>;
-			/* LDOVBBGPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBGPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1090000		0	0x0	0 0x02000000 0x01F00000
-			1210000		0	0x4	0 0x02000000 0x01F00000
-			1280000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-			status = "disabled";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		qspi: qspi@4b300000 {
-			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>;
-			reg-names = "qspi_base";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			clocks = <&qspi_gfclk_div>;
-			clock-names = "fck";
-			num-cs = <4>;
-			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		/* OCP2SCP3 */
-		ocp2scp@4a090000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = <0x4a090000 0x20>;
-			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4A096000 {
-				compatible = "ti,phy-pipe3-sata";
-				reg = <0x4A096000 0x80>, /* phy_rx */
-				      <0x4A096400 0x64>, /* phy_tx */
-				      <0x4A096800 0x40>; /* pll_ctrl */
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin1>;
-				clock-names = "sysclk";
-				#phy-cells = <0>;
-			};
-
-			pcie1_phy: pciephy@4a094000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a094000 0x80>, /* phy_rx */
-				      <0x4a094400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie1phy>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy1_32khz>,
-					 <&optfclk_pciephy1_clk>,
-					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
-				#phy-cells = <0>;
-				id = <1>;
-				ti,hwmods = "pcie1-phy";
-			};
-
-			pcie2_phy: pciephy@4a095000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a095000 0x80>, /* phy_rx */
-				      <0x4a095400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie2phy>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy2_32khz>,
-					 <&optfclk_pciephy2_clk>,
-					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
-				#phy-cells = <0>;
-				ti,hwmods = "pcie2-phy";
-				id = <2>;
-				status = "disabled";
-			};
-		};
-
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&sata_ref_clk>;
-			ti,hwmods = "sata";
-		};
-
-		omap_control_pcie1phy: control-phy@0x4a003c40 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		omap_control_pcie2phy: control-pcie@0x4a003c44 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-			status = "disabled";
-		};
-
-		omap_control_usb2phy1: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy1: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb2phy2: control-phy@0x4a002e74 {
-			compatible = "ti,control-phy-usb2-dra7";
-			reg = <0x4a002e74 0x4>;
-			reg-names = "power";
-		};
-
-		/* OCP2SCP1 */
-		ocp2scp@4a080000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = <0x4a080000 0x20>;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy1: phy@4a084000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a084000 0x400>;
-				ctrl-module = <&omap_control_usb2phy1>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb2_phy2: phy@4a085000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a085000 0x400>;
-				ctrl-module = <&omap_control_usb2phy2>;
-				clocks = <&usb_phy2_always_on_clk32k>,
-					 <&usb_otg_ss2_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb3_phy1: phy@4a084400 {
-				compatible = "ti,omap-usb3";
-				reg = <0x4a084400 0x80>,
-				      <0x4a084800 0x64>,
-				      <0x4a084c00 0x40>;
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy1>;
-				clocks = <&usb_phy3_always_on_clk32k>,
-					 <&sys_clkin1>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"sysclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		omap_dwc3_1@48880000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x48880000 0x10000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb1: usb@48890000 {
-				compatible = "snps,dwc3";
-				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy1>, <&usb3_phy1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
-				maximum-speed = "super-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		omap_dwc3_2@488c0000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss2";
-			reg = <0x488c0000 0x10000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb2: usb@488d0000 {
-				compatible = "snps,dwc3";
-				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
-		omap_dwc3_3@48900000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss3";
-			reg = <0x48900000 0x10000>;
-			interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb3: usb@48910000 {
-				compatible = "snps,dwc3";
-				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		omap_dwc3_4@48940000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss4";
-			reg = <0x48940000 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb4: usb@48950000 {
-				compatible = "snps,dwc3";
-				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		elm: elm@48078000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48078000 0xfc0>;      /* device IO registers */
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x37c>;      /* device IO registers */
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		atl: atl@4843c000 {
-			compatible = "ti,dra7-atl";
-			reg = <0x4843c000 0x3ff>;
-			ti,hwmods = "atl";
-			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
-					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
-			clocks = <&atl_gfclk_mux>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		crossbar_mpu: crossbar@4a020000 {
-			compatible = "ti,irq-crossbar";
-			reg = <0x4a002a48 0x130>;
-			ti,max-irqs = <160>;
-			ti,max-crossbar-sources = <MAX_SOURCES>;
-			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
-			ti,irqs-skip = <10 133 139 140>;
-			ti,irqs-safe-map = <0>;
-		};
-	};
-};
-
-/include/ "dra7xx-clocks.dtsi"
diff --git a/src/arm/dra72-evm.dts b/src/arm/dra72-evm.dts
deleted file mode 100644
index 514702348818..000000000000
--- a/src/arm/dra72-evm.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "dra72x.dtsi"
-
-/ {
-	model = "TI DRA722";
-	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1024 MB */
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/dra72x.dtsi b/src/arm/dra72x.dtsi
deleted file mode 100644
index f1ec22f6ebf4..000000000000
--- a/src/arm/dra72x.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-	};
-};
diff --git a/src/arm/dra74x.dtsi b/src/arm/dra74x.dtsi
deleted file mode 100644
index a4e8bb9f95c0..000000000000
--- a/src/arm/dra74x.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-};
diff --git a/src/arm/dra7xx-clocks.dtsi b/src/arm/dra7xx-clocks.dtsi
deleted file mode 100644
index 2c05b3f017fa..000000000000
--- a/src/arm/dra7xx-clocks.dtsi
+++ /dev/null
@@ -1,2058 +0,0 @@
-/*
- * Device Tree Source for DRA7xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin1_ck: atl_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin2_ck: atl_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin3_ck: atl_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	hdmi_clkin_ck: hdmi_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlb_clkin_ck: mlb_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlbp_clkin_ck: mlbp_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	ref_clkin0_ck: ref_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin1_ck: ref_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin2_ck: ref_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin3_ck: ref_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	rmii_clk_ck: rmii_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_20000000_ck: virt_20000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	sys_clkin2: sys_clkin2 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <22579200>;
-	};
-
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_clkin_ck: video1_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_clkin_ck: video2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_clk: abe_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dclk_div: mpu_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_dsp_ck: dpll_dsp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
-	};
-
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0244>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-	};
-
-	dpll_iva_m2_ck: dpll_iva_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	iva_dclk: iva_dclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_iva_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_gpu_ck: dpll_gpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
-	};
-
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02e8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0220>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_ck: dpll_gmac_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
-	};
-
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	video2_dclk_div: video2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_dclk_div: video1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_dclk_div: hdmi_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_eve_ck: dpll_eve_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
-	};
-
-	dpll_eve_m2_ck: dpll_eve_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_eve_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0294>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	eve_dclk_div: eve_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_eve_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0228>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_dsp_ck>;
-	};
-
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0248>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_gmac_ck>;
-	};
-
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	gmii_m_clk_div: gmii_m_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_gmac_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hdmi_clk2_div: hdmi_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_div_clk: hdmi_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_iclk_div: l3_iclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
-	};
-
-	l4_root_clk_div: l4_root_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	video1_clk2_div: video1_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_div_clk: video1_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_clk2_div: video2_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_div_clk: video2_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ipu1_gfclk_mux: ipu1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0520>;
-	};
-
-	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0550>;
-	};
-
-	timer5_gfclk_mux: timer5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	timer6_gfclk_mux: timer6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0560>;
-	};
-
-	timer7_gfclk_mux: timer7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer8_gfclk_mux: timer8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	uart6_gfclk_mux: uart6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin1: sys_clkin1 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x0114>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x011c>;
-		ti,dividers = <8>, <16>;
-	};
-
-	aess_fclk: aess_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		reg = <0x0178>;
-		ti,max-div = <2>;
-	};
-
-	abe_giclk_div: abe_giclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		reg = <0x0174>;
-		ti,max-div = <2>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x01d8>;
-		ti,dividers = <16>, <32>;
-	};
-
-	abe_sys_clk_div: abe_sys_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0120>;
-		ti,max-div = <2>;
-	};
-
-	adc_gfclk_mux: adc_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
-		reg = <0x01dc>;
-	};
-
-	sys_clk1_dclk_div: sys_clk1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c8>;
-		ti,index-power-of-two;
-	};
-
-	sys_clk2_dclk_div: sys_clk2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin2>;
-		ti,max-div = <64>;
-		reg = <0x01cc>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01bc>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gclk_div: dsp_gclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
-	};
-
-	gpu_dclk: gpu_dclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01a0>;
-		ti,index-power-of-two;
-	};
-
-	emif_phy_dclk_div: emif_phy_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0190>;
-		ti,index-power-of-two;
-	};
-
-	gmac_250m_dclk_div: gmac_250m_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	l3init_480m_dclk_div: l3init_480m_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01ac>;
-		ti,index-power-of-two;
-	};
-
-	usb_otg_dclk_div: usb_otg_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&usb_otg_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0184>;
-		ti,index-power-of-two;
-	};
-
-	sata_dclk_div: sata_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c0>;
-		ti,index-power-of-two;
-	};
-
-	pcie2_dclk_div: pcie2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b8>;
-		ti,index-power-of-two;
-	};
-
-	pcie_dclk_div: pcie_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b4>;
-		ti,index-power-of-two;
-	};
-
-	emu_dclk_div: emu_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x0194>;
-		ti,index-power-of-two;
-	};
-
-	secure_32k_dclk_div: secure_32k_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&secure_32k_clk_src_ck>;
-		ti,max-div = <64>;
-		reg = <0x01c4>;
-		ti,index-power-of-two;
-	};
-
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0158>;
-	};
-
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x015c>;
-	};
-
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0160>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	eve_clk: eve_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
-		reg = <0x0180>;
-	};
-
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x01a4>;
-	};
-
-	mlb_clk: mlb_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlb_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0134>;
-		ti,index-power-of-two;
-	};
-
-	mlbp_clk: mlbp_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlbp_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0130>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0138>;
-		ti,index-power-of-two;
-	};
-
-	timer_sys_clk_div: timer_sys_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0144>;
-		ti,max-div = <2>;
-	};
-
-	video1_dpll_clk_mux: video1_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x01d0>;
-	};
-
-	video2_dpll_clk_mux: video2_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x01d4>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1838>;
-	};
-
-	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		ti,bit-shift = <24>;
-		reg = <0x1888>;
-	};
-
-	timer1_gfclk_mux: timer1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart10_gfclk_mux: uart10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1880>;
-	};
-};
-&cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin1>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c 0x4>;
-		ti,bit-shift = <7>;
-	};
-
-	apll_pcie_ck: apll_pcie_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-apll-clock";
-		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x021c>, <0x0220>;
-	};
-
-	optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c>;
-		ti,dividers = <2>, <1>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-	};
-
-	optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <10>;
-	};
-
-	optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <10>;
-	};
-
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_ck: dpll_usb_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	l3init_960m_gfclk: l3init_960m_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x06c0>;
-	};
-
-	dss_32khz_clk: dss_32khz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1120>;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1120>;
-	};
-
-	dss_dss_clk: dss_dss_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_h12x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1120>;
-	};
-
-	dss_hdmi_clk: dss_hdmi_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&hdmi_dpll_clk_mux>;
-		ti,bit-shift = <10>;
-		reg = <0x1120>;
-	};
-
-	dss_video1_clk: dss_video1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video1_dpll_clk_mux>;
-		ti,bit-shift = <12>;
-		reg = <0x1120>;
-	};
-
-	dss_video2_clk: dss_video2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video2_dpll_clk_mux>;
-		ti,bit-shift = <13>;
-		reg = <0x1120>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1760>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1768>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1770>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1778>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1780>;
-	};
-
-	gpio7_dbclk: gpio7_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1810>;
-	};
-
-	gpio8_dbclk: gpio8_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1818>;
-	};
-
-	mmc1_clk32k: mmc1_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1328>;
-	};
-
-	mmc2_clk32k: mmc2_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1330>;
-	};
-
-	mmc3_clk32k: mmc3_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1820>;
-	};
-
-	mmc4_clk32k: mmc4_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1828>;
-	};
-
-	sata_ref_clk: sata_ref_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin1>;
-		ti,bit-shift = <8>;
-		reg = <0x1388>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x13f0>;
-	};
-
-	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1340>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0688>;
-	};
-
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0698>;
-	};
-
-	atl_dpll_clk_mux: atl_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0c00>;
-	};
-
-	atl_gfclk_mux: atl_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
-		ti,bit-shift = <26>;
-		reg = <0x0c00>;
-	};
-
-	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x13d0>;
-		ti,dividers = <2>;
-	};
-
-	gmac_rft_clk_mux: gmac_rft_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
-		ti,bit-shift = <25>;
-		reg = <0x13d0>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x1220>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&wkupaon_iclk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0e50>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1860>;
-	};
-
-	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1868>;
-	};
-
-	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1868>;
-	};
-
-	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1898>;
-	};
-
-	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1898>;
-	};
-
-	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1878>;
-	};
-
-	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1878>;
-	};
-
-	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1904>;
-	};
-
-	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1904>;
-	};
-
-	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1908>;
-	};
-
-	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1908>;
-	};
-
-	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <22>;
-		reg = <0x1890>;
-	};
-
-	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <24>;
-		reg = <0x1890>;
-	};
-
-	mmc1_fclk_mux: mmc1_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1328>;
-	};
-
-	mmc1_fclk_div: mmc1_fclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc1_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1328>;
-		ti,index-power-of-two;
-	};
-
-	mmc2_fclk_mux: mmc2_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1330>;
-	};
-
-	mmc2_fclk_div: mmc2_fclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc2_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1330>;
-		ti,index-power-of-two;
-	};
-
-	mmc3_gfclk_mux: mmc3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1820>;
-	};
-
-	mmc3_gfclk_div: mmc3_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc3_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1820>;
-		ti,index-power-of-two;
-	};
-
-	mmc4_gfclk_mux: mmc4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1828>;
-	};
-
-	mmc4_gfclk_div: mmc4_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc4_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1828>;
-		ti,index-power-of-two;
-	};
-
-	qspi_gfclk_mux: qspi_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1838>;
-	};
-
-	qspi_gfclk_div: qspi_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&qspi_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1838>;
-		ti,index-power-of-two;
-	};
-
-	timer10_gfclk_mux: timer10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1728>;
-	};
-
-	timer11_gfclk_mux: timer11_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1730>;
-	};
-
-	timer13_gfclk_mux: timer13_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17c8>;
-	};
-
-	timer14_gfclk_mux: timer14_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d0>;
-	};
-
-	timer15_gfclk_mux: timer15_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d8>;
-	};
-
-	timer16_gfclk_mux: timer16_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1830>;
-	};
-
-	timer2_gfclk_mux: timer2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1738>;
-	};
-
-	timer3_gfclk_mux: timer3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1740>;
-	};
-
-	timer4_gfclk_mux: timer4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1748>;
-	};
-
-	timer9_gfclk_mux: timer9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1750>;
-	};
-
-	uart1_gfclk_mux: uart1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart2_gfclk_mux: uart2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1848>;
-	};
-
-	uart3_gfclk_mux: uart3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1850>;
-	};
-
-	uart4_gfclk_mux: uart4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1858>;
-	};
-
-	uart5_gfclk_mux: uart5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1870>;
-	};
-
-	uart7_gfclk_mux: uart7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18d0>;
-	};
-
-	uart8_gfclk_mux: uart8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e0>;
-	};
-
-	uart9_gfclk_mux: uart9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e8>;
-	};
-
-	vip1_gclk_mux: vip1_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1020>;
-	};
-
-	vip2_gclk_mux: vip2_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	vip3_gclk_mux: vip3_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-};
-
-&cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
-	};
-};
diff --git a/src/arm/ea3250.dts b/src/arm/ea3250.dts
deleted file mode 100644
index a4ba31b23c88..000000000000
--- a/src/arm/ea3250.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Embedded Artists LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "lpc32xx.dtsi"
-
-/ {
-	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
-	compatible = "ea,ea3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
-		/* 128MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <260000000>;
-			nxp,whold = <104000000>;
-			nxp,wsetup = <200000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <34666666>;
-			nxp,rhold = <104000000>;
-			nxp,rsetup = <200000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "ea3250-boot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-
-			mtd1@00080000 {
-				label = "ea3250-uboot";
-				reg = <0x00080000 0x000c0000>;
-				read-only;
-			};
-
-			mtd2@00140000 {
-				label = "ea3250-kernel";
-				reg = <0x00140000 0x00400000>;
-			};
-
-			mtd3@00540000 {
-				label = "ea3250-rootfs";
-				reg = <0x00540000 0x07ac0000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			uart6: serial@40098000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "at,24c256";
-					reg = <0x50>;
-				};
-
-				eeprom@57 {
-					compatible = "at,24c64";
-					reg = <0x57>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-
-				pca9532: pca9532@60 {
-					compatible = "nxp,pca9532";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x60>;
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2d {
-					compatible = "nxp,isp1301";
-					reg = <0x2d>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&pca9532 5 0>;
-				cd-gpios = <&pca9532 4 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart1: serial@40014000 {
-				status = "okay";
-			};
-
-			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-			adc@40048000 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-		button@21 {
-			label = "Interrupt Key";
-			linux,code = <103>;
-			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
-		};
-		key1 {
-			label = "KEY1";
-			linux,code = <1>;
-			gpios = <&pca9532 0 0>;
-		};
-		key2 {
-			label = "KEY2";
-			linux,code = <2>;
-			gpios = <&pca9532 1 0>;
-		};
-		key3 {
-			label = "KEY3";
-			linux,code = <3>;
-			gpios = <&pca9532 2 0>;
-		};
-		key4 {
-			label = "KEY4";
-			linux,code = <4>;
-			gpios = <&pca9532 3 0>;
-		};
-		joy0 {
-			label = "Joystick Key 0";
-			linux,code = <10>;
-			gpios = <&gpio 2 0 0>; /* P2.0 */
-		};
-		joy1 {
-			label = "Joystick Key 1";
-			linux,code = <11>;
-			gpios = <&gpio 2 1 0>; /* P2.1 */
-		};
-		joy2 {
-			label = "Joystick Key 2";
-			linux,code = <12>;
-			gpios = <&gpio 2 2 0>; /* P2.2 */
-		};
-		joy3 {
-			label = "Joystick Key 3";
-			linux,code = <13>;
-			gpios = <&gpio 2 3 0>; /* P2.3 */
-		};
-		joy4 {
-			label = "Joystick Key 4";
-			linux,code = <14>;
-			gpios = <&gpio 2 4 0>; /* P2.4 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* LEDs on OEM Board */
-
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
-		};
-
-		led2 {
-			gpios = <&gpio 2 10 1>; /* P2.10, active low */
-			default-state = "off";
-		};
-
-		led3 {
-			gpios = <&gpio 2 11 1>; /* P2.11, active low */
-			default-state = "off";
-		};
-
-		led4 {
-			gpios = <&gpio 2 12 1>; /* P2.12, active low */
-			default-state = "off";
-		};
-
-		/* LEDs on Base Board */
-
-		lede1 {
-			gpios = <&pca9532 8 0>;
-			default-state = "off";
-		};
-		lede2 {
-			gpios = <&pca9532 9 0>;
-			default-state = "off";
-		};
-		lede3 {
-			gpios = <&pca9532 10 0>;
-			default-state = "off";
-		};
-		lede4 {
-			gpios = <&pca9532 11 0>;
-			default-state = "off";
-		};
-		lede5 {
-			gpios = <&pca9532 12 0>;
-			default-state = "off";
-		};
-		lede6 {
-			gpios = <&pca9532 13 0>;
-			default-state = "off";
-		};
-		lede7 {
-			gpios = <&pca9532 14 0>;
-			default-state = "off";
-		};
-		lede8 {
-			gpios = <&pca9532 15 0>;
-			default-state = "off";
-		};
-	};
-};
diff --git a/src/arm/ecx-2000.dts b/src/arm/ecx-2000.dts
deleted file mode 100644
index 2ccbb57fbfa8..000000000000
--- a/src/arm/ecx-2000.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda ECX-2000";
-	compatible = "calxeda,ecx-2000";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	clock-ranges;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-	};
-
-	memory@0 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
-	};
-
-	memory@200000000 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
-
-		timer {
-			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
-				<1 14 0xf08>,
-				<1 11 0xf08>,
-				<1 10 0xf08>;
-		};
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,ecx-2000-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			interrupt-controller;
-			interrupts = <1 9 0xf04>;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff12000 0x1000>,
-			      <0xfff14000 0x2000>,
-			      <0xfff16000 0x2000>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
-		};
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/src/arm/ecx-common.dtsi b/src/arm/ecx-common.dtsi
deleted file mode 100644
index b90045a8f8e3..000000000000
--- a/src/arm/ecx-common.dtsi
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/ {
-	chosen {
-		bootargs = "console=ttyAMA0";
-	};
-
-	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-
-		sata@ffe08000 {
-			compatible = "calxeda,hb-ahci";
-			reg = <0xffe08000 0x10000>;
-			interrupts = <0 83 4>;
-			dma-coherent;
-			calxeda,port-phys = <&combophy5 0 &combophy0 0
-					     &combophy0 1 &combophy0 2
-					     &combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
-			calxeda,led-order = <4 0 1 2 3>;
-		};
-
-		sdhci@ffe0e000 {
-			compatible = "calxeda,hb-sdhci";
-			reg = <0xffe0e000 0x1000>;
-			interrupts = <0 90 4>;
-			clocks = <&eclk>;
-			status = "disabled";
-		};
-
-		ipc@fff20000 {
-			compatible = "arm,pl320", "arm,primecell";
-			reg = <0xfff20000 0x1000>;
-			interrupts = <0 7 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpioe: gpio@fff30000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff30000 0x1000>;
-			interrupts = <0 14 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpiof: gpio@fff31000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff31000 0x1000>;
-			interrupts = <0 15 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpiog: gpio@fff32000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff32000 0x1000>;
-			interrupts = <0 16 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpioh: gpio@fff33000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff33000 0x1000>;
-			interrupts = <0 17 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		timer@fff34000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xfff34000 0x1000>;
-			interrupts = <0 18 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		rtc@fff35000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0xfff35000 0x1000>;
-			interrupts = <0 19 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		serial@fff36000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xfff36000 0x1000>;
-			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		smic@fff3a000 {
-			compatible = "ipmi-smic";
-			device_type = "ipmi";
-			reg = <0xfff3a000 0x1000>;
-			interrupts = <0 24 4>;
-			reg-size = <4>;
-			reg-spacing = <4>;
-		};
-
-		sregs@fff3c000 {
-			compatible = "calxeda,hb-sregs";
-			reg = <0xfff3c000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				osc: oscillator {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <33333000>;
-				};
-
-				ddrpll: ddrpll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x108>;
-				};
-
-				a9pll: a9pll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x100>;
-				};
-
-				a9periphclk: a9periphclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-a9periph-clock";
-					clocks = <&a9pll>;
-					reg = <0x104>;
-				};
-
-				a9bclk: a9bclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-a9bus-clock";
-					clocks = <&a9pll>;
-					reg = <0x104>;
-				};
-
-				emmcpll: emmcpll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x10C>;
-				};
-
-				eclk: eclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-emmc-clock";
-					clocks = <&emmcpll>;
-					reg = <0x114>;
-				};
-
-				pclk: pclk {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <150000000>;
-				};
-			};
-		};
-
-		dma@fff3d000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xfff3d000 0x1000>;
-			interrupts = <0 92 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		ethernet@fff50000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
-			dma-coherent;
-		};
-
-		ethernet@fff51000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
-			dma-coherent;
-		};
-
-		combophy0: combo-phy@fff58000 {
-			compatible = "calxeda,hb-combophy";
-			#phy-cells = <1>;
-			reg = <0xfff58000 0x1000>;
-			phydev = <5>;
-		};
-
-		combophy5: combo-phy@fff5d000 {
-			compatible = "calxeda,hb-combophy";
-			#phy-cells = <1>;
-			reg = <0xfff5d000 0x1000>;
-			phydev = <31>;
-		};
-	};
-};
diff --git a/src/arm/efm32gg-dk3750.dts b/src/arm/efm32gg-dk3750.dts
deleted file mode 100644
index b4031fa4a567..000000000000
--- a/src/arm/efm32gg-dk3750.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Device tree for EFM32GG-DK3750 development board.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
- */
-
-/dts-v1/;
-#include "efm32gg.dtsi"
-
-/ {
-	model = "Energy Micro Giant Gecko Development Kit";
-	compatible = "efm32,dk3750";
-
-	chosen {
-		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
-	};
-
-	memory {
-		reg = <0x88000000 0x400000>;
-	};
-
-	soc {
-		adc@40002000 {
-			status = "ok";
-		};
-
-		i2c@4000a000 {
-			efm32,location = <3>;
-			status = "ok";
-
-			temp@48 {
-				compatible = "st,stds75";
-				reg = <0x48>;
-			};
-
-			eeprom@50 {
-				compatible = "microchip,24c02";
-				reg = <0x50>;
-				pagesize = <16>;
-			};
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			cs-gpios = <&gpio 68 1>; // E4
-			location = <1>;
-			status = "ok";
-
-			microsd@0 {
-				compatible = "mmc-spi-slot";
-				spi-max-frequency = <100000>;
-				voltage-ranges = <3200 3400>;
-				broken-cd;
-				reg = <0>;
-			};
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			cs-gpios = <&gpio 51 1>; // D3
-			location = <1>;
-			status = "ok";
-
-			ks8851@0 {
-				compatible = "ks8851";
-				spi-max-frequency = <6000000>;
-				reg = <0>;
-				interrupt-parent = <&boardfpga>;
-				interrupts = <4>;
-			};
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			location = <2>;
-			status = "ok";
-		};
-
-		boardfpga: boardfpga {
-			compatible = "efm32board";
-			reg = <0x80000000 0x400>;
-			irq-gpios = <&gpio 64 1>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			status = "ok";
-		};
-	};
-};
diff --git a/src/arm/efm32gg.dtsi b/src/arm/efm32gg.dtsi
deleted file mode 100644
index 106d505c5d3d..000000000000
--- a/src/arm/efm32gg.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Device tree for Energy Micro EFM32 Giant Gecko SoC.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
- */
-#include "armv7-m.dtsi"
-#include "dt-bindings/clock/efm32-cmu.h"
-
-/ {
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-	};
-
-	soc {
-		adc: adc@40002000 {
-			compatible = "efm32,adc";
-			reg = <0x40002000 0x400>;
-			interrupts = <7>;
-			clocks = <&cmu clk_HFPERCLKADC0>;
-			status = "disabled";
-		};
-
-		gpio: gpio@40006000 {
-			compatible = "efm32,gpio";
-			reg = <0x40006000 0x1000>;
-			interrupts = <1 11>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			clocks = <&cmu clk_HFPERCLKGPIO>;
-			status = "ok";
-		};
-
-		i2c0: i2c@4000a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,i2c";
-			reg = <0x4000a000 0x400>;
-			interrupts = <9>;
-			clocks = <&cmu clk_HFPERCLKI2C0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4000a400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,i2c";
-			reg = <0x4000a400 0x400>;
-			interrupts = <10>;
-			clocks = <&cmu clk_HFPERCLKI2C1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		spi2: spi@4000c800 { /* USART2 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart0: uart@4000c000 { /* USART0 */
-			compatible = "efm32,uart";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		uart1: uart@4000c400 { /* USART1 */
-			compatible = "efm32,uart";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		uart2: uart@4000c800 { /* USART2 */
-			compatible = "efm32,uart";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart3: uart@4000e000 { /* UART0 */
-			compatible = "efm32,uart";
-			reg = <0x4000e000 0x400>;
-			interrupts = <20 21>;
-			clocks = <&cmu clk_HFPERCLKUART0>;
-			status = "disabled";
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			compatible = "efm32,uart";
-			reg = <0x4000e400 0x400>;
-			interrupts = <22 23>;
-			clocks = <&cmu clk_HFPERCLKUART1>;
-			status = "disabled";
-		};
-
-		timer0: timer@40010000 {
-			compatible = "efm32,timer";
-			reg = <0x40010000 0x400>;
-			interrupts = <2>;
-			clocks = <&cmu clk_HFPERCLKTIMER0>;
-		};
-
-		timer1: timer@40010400 {
-			compatible = "efm32,timer";
-			reg = <0x40010400 0x400>;
-			interrupts = <12>;
-			clocks = <&cmu clk_HFPERCLKTIMER1>;
-		};
-
-		timer2: timer@40010800 {
-			compatible = "efm32,timer";
-			reg = <0x40010800 0x400>;
-			interrupts = <13>;
-			clocks = <&cmu clk_HFPERCLKTIMER2>;
-		};
-
-		timer3: timer@40010c00 {
-			compatible = "efm32,timer";
-			reg = <0x40010c00 0x400>;
-			interrupts = <14>;
-			clocks = <&cmu clk_HFPERCLKTIMER3>;
-		};
-
-		cmu: cmu@400c8000 {
-			compatible = "efm32gg,cmu";
-			reg = <0x400c8000 0x400>;
-			interrupts = <32>;
-			#clock-cells = <1>;
-		};
-	};
-};
diff --git a/src/arm/elpida_ecb240abacn.dtsi b/src/arm/elpida_ecb240abacn.dtsi
deleted file mode 100644
index f97f70f83374..000000000000
--- a/src/arm/elpida_ecb240abacn.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Common devices used in different OMAP boards
- */
-
-/ {
-	elpida_ECB240ABACN: lpddr2 {
-		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
-		density		= <2048>;
-		io-width	= <32>;
-
-		tRPab-min-tck	= <3>;
-		tRCD-min-tck	= <3>;
-		tWR-min-tck	= <3>;
-		tRASmin-min-tck	= <3>;
-		tRRD-min-tck	= <2>;
-		tWTR-min-tck	= <2>;
-		tXP-min-tck	= <2>;
-		tRTP-min-tck	= <2>;
-		tCKE-min-tck	= <3>;
-		tCKESR-min-tck	= <3>;
-		tFAW-min-tck	= <8>;
-
-		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <400000000>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <7500>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-
-		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <200000000>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <10000>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-	};
-};
diff --git a/src/arm/emev2-kzm9d.dts b/src/arm/emev2-kzm9d.dts
deleted file mode 100644
index 50ccd151091e..000000000000
--- a/src/arm/emev2-kzm9d.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Device Tree Source for the KZM9D board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-/dts-v1/;
-
-#include "emev2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "EMEV2 KZM9D Board";
-	compatible = "renesas,kzm9d", "renesas,emev2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	lan9220@20000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x20000000 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpio0>;
-		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-1";
-			linux,code = <KEY_1>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-2";
-			linux,code = <KEY_2>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		button@3 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-3";
-			linux,code = <KEY_3>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-		button@4 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-4";
-			linux,code = <KEY_4>;
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/emev2.dtsi b/src/arm/emev2.dtsi
deleted file mode 100644
index 00eeed3721b6..000000000000
--- a/src/arm/emev2.dtsi
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * Device Tree Source for the EMEV2 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,emev2";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <533000000>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			clock-frequency = <533000000>;
-		};
-	};
-
-	gic: interrupt-controller@e0020000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0xe0028000 0x1000>,
-		      <0xe0020000 0x0100>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	smu@e0110000 {
-		compatible = "renesas,emev2-smu";
-		reg = <0xe0110000 0x10000>;
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		c32ki: c32ki {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			#clock-cells = <0>;
-		};
-		pll3_fo: pll3_fo {
-			compatible = "fixed-factor-clock";
-			clocks = <&c32ki>;
-			clock-div = <1>;
-			clock-mult = <7000>;
-			#clock-cells = <0>;
-		};
-		usia_u0_sclkdiv: usia_u0_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x610 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u1_sclkdiv: usib_u1_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x65c 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u2_sclkdiv: usib_u2_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x65c 16>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u3_sclkdiv: usib_u3_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x660 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usia_u0_sclk: usia_u0_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4a0 1>;
-			clocks = <&usia_u0_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u1_sclk: usib_u1_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4b8 1>;
-			clocks = <&usib_u1_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u2_sclk: usib_u2_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4bc 1>;
-			clocks = <&usib_u2_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u3_sclk: usib_u3_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4c0 1>;
-			clocks = <&usib_u3_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		sti_sclk: sti_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x528 1>;
-			clocks = <&c32ki>;
-			#clock-cells = <0>;
-		};
-	};
-
-	sti@e0180000 {
-		compatible = "renesas,em-sti";
-		reg = <0xe0180000 0x54>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sti_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1020000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1020000 0x38>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usia_u0_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1030000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1030000 0x38>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u1_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1040000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1040000 0x38>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u2_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1050000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1050000 0x38>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u3_sclk>;
-		clock-names = "sclk";
-	};
-
-	gpio0: gpio@e0050000 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio1: gpio@e0050080 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio2: gpio@e0050100 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio3: gpio@e0050180 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio4: gpio@e0050200 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <31>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/src/arm/exynos3250-pinctrl.dtsi b/src/arm/exynos3250-pinctrl.dtsi
deleted file mode 100644
index 47b92c150f4e..000000000000
--- a/src/arm/exynos3250-pinctrl.dtsi
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c3_bus: i2c3-bus {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	mipi0_clk: mipi0-clk {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	gpe0: gpe0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe1: gpe1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe2: gpe2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
-				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
-				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_rdqs: sd0-rdqs {
-		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0 {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1 {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_uart: fimc-is-uart {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
diff --git a/src/arm/exynos3250.dtsi b/src/arm/exynos3250.dtsi
deleted file mode 100644
index 1d52de6370d5..000000000000
--- a/src/arm/exynos3250.dtsi
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- * Samsung's Exynos3250 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/exynos3250.h>
-
-/ {
-	compatible = "samsung,exynos3250";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fixed-rate-clocks {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xusbxti: clock@0 {
-				compatible = "fixed-clock";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xusbxti";
-			};
-
-			xxti: clock@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xxti";
-			};
-
-			xtcxo: clock@2 {
-				compatible = "fixed-clock";
-				reg = <2>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xtcxo";
-			};
-		};
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@3f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x3f000 0x1000>;
-			};
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sys_reg: syscon@10010000 {
-			compatible = "samsung,exynos3-sysreg", "syscon";
-			reg = <0x10010000 0x400>;
-		};
-
-		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
-			reg = <0x10020000 0x4000>;
-		};
-
-		pd_cam: cam-power-domain@10023C00 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
-		};
-
-		pd_mfc: mfc-power-domain@10023C40 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
-		};
-
-		pd_g3d: g3d-power-domain@10023C60 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
-		};
-
-		pd_lcd0: lcd0-power-domain@10023C80 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
-		};
-
-		pd_isp: isp-power-domain@10023CA0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
-		};
-
-		cmu: clock-controller@10030000 {
-			compatible = "samsung,exynos3250-cmu";
-			reg = <0x10030000 0x20000>;
-			#clock-cells = <1>;
-		};
-
-		rtc: rtc@10070000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x10070000 0x100>;
-			interrupts = <0 73 0>, <0 74 0>;
-			status = "disabled";
-		};
-
-		tmu: tmu@100C0000 {
-			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
-			interrupts = <0 216 0>;
-			clocks = <&cmu CLK_TMU_APBIF>;
-			clock-names = "tmu_apbif";
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-			      <0x10482000 0x1000>,
-			      <0x10484000 0x2000>,
-			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		mct@10050000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
-				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
-			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 0>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <0 48 0>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 0>;
-		};
-
-		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 0>;
-			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 0>;
-			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 0>;
-				clocks = <&cmu CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 0>;
-				clocks = <&cmu CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-		};
-
-		adc: adc@126C0000 {
-			compatible = "samsung,exynos3250-adc",
-				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
-			interrupts = <0 137 0>;
-			clock-names = "adc", "sclk";
-			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			status = "disabled";
-		};
-
-		serial_0: serial@13800000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13800000 0x100>;
-			interrupts = <0 109 0>;
-			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_data &uart0_fctl>;
-			status = "disabled";
-		};
-
-		serial_1: serial@13810000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13810000 0x100>;
-			interrupts = <0 110 0>;
-			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_data>;
-			status = "disabled";
-		};
-
-		i2c_0: i2c@13860000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13860000 0x100>;
-			interrupts = <0 113 0>;
-			clocks = <&cmu CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@13870000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13870000 0x100>;
-			interrupts = <0 114 0>;
-			clocks = <&cmu CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@13880000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13880000 0x100>;
-			interrupts = <0 115 0>;
-			clocks = <&cmu CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_bus>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@13890000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13890000 0x100>;
-			interrupts = <0 116 0>;
-			clocks = <&cmu CLK_I2C3>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_bus>;
-			status = "disabled";
-		};
-
-		i2c_4: i2c@138A0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 0>;
-			clocks = <&cmu CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@138B0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 0>;
-			clocks = <&cmu CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@138C0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 0>;
-			clocks = <&cmu CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@138D0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 0>;
-			clocks = <&cmu CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@13920000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13920000 0x100>;
-			interrupts = <0 121 0>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			status = "disabled";
-		};
-
-		spi_1: spi@13930000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13930000 0x100>;
-			interrupts = <0 122 0>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@13970000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0x13970000 0x100>;
-			interrupts = <0 126 0>;
-			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0";
-			dmas = <&pdma0 14>, <&pdma0 13>;
-			dma-names = "tx", "rx";
-			pinctrl-0 = <&i2s2_bus>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		pwm: pwm@139D0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-				     <0 107 0>, <0 108 0>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupts = <0 18 0>, <0 19 0>;
-		};
-	};
-};
-
-#include "exynos3250-pinctrl.dtsi"
diff --git a/src/arm/exynos4.dtsi b/src/arm/exynos4.dtsi
deleted file mode 100644
index e0278ecbc816..000000000000
--- a/src/arm/exynos4.dtsi
+++ /dev/null
@@ -1,648 +0,0 @@
-/*
- * Samsung's Exynos4 SoC series common device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
- * SoCs from Exynos4 series can include this file and provide values for SoCs
- * specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/exynos4.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		csis0 = &csis_0;
-		csis1 = &csis_1;
-		fimc0 = &fimc_0;
-		fimc1 = &fimc_1;
-		fimc2 = &fimc_2;
-		fimc3 = &fimc_3;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-	};
-
-	clock_audss: clock-controller@03810000 {
-		compatible = "samsung,exynos4210-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x03830000 0x100>;
-		clocks = <&clock_audss EXYNOS_I2S_BUS>;
-		clock-names = "iis";
-		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
-		dma-names = "tx", "rx", "tx-sec";
-		samsung,idma-addr = <0x03000000>;
-		status = "disabled";
-	};
-
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
-	mipi_phy: video-phy@10020710 {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10020710 8>;
-		#phy-cells = <1>;
-	};
-
-	pd_mfc: mfc-power-domain@10023C40 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C40 0x20>;
-	};
-
-	pd_g3d: g3d-power-domain@10023C60 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C60 0x20>;
-	};
-
-	pd_lcd0: lcd0-power-domain@10023C80 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C80 0x20>;
-	};
-
-	pd_tv: tv-power-domain@10023C20 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C20 0x20>;
-	};
-
-	pd_cam: cam-power-domain@10023C00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C00 0x20>;
-	};
-
-	pd_gps: gps-power-domain@10023CE0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CE0 0x20>;
-	};
-
-	pd_gps_alive: gps-alive-power-domain@10023D00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023D00 0x20>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0x10440000 0x1000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>, <3 2>;
-	};
-
-	sys_reg: syscon@10010000 {
-		compatible = "samsung,exynos4-sysreg", "syscon";
-		reg = <0x10010000 0x400>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4210-pmu", "syscon";
-		reg = <0x10020000 0x4000>;
-	};
-
-	dsi_0: dsi@11C80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
-		samsung,power-domain = <&pd_lcd0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
-		clock-names = "bus_clk", "pll_clk";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	camera {
-		compatible = "samsung,fimc", "simple-bus";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#clock-cells = <1>;
-		clock-output-names = "cam_a_clkout", "cam_b_clkout";
-		ranges;
-
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11800000 0x1000>;
-			interrupts = <0 84 0>;
-			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		fimc_1: fimc@11810000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11810000 0x1000>;
-			interrupts = <0 85 0>;
-			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		fimc_2: fimc@11820000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11820000 0x1000>;
-			interrupts = <0 86 0>;
-			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		fimc_3: fimc@11830000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11830000 0x1000>;
-			interrupts = <0 87 0>;
-			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		csis_0: csis@11880000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11880000 0x4000>;
-			interrupts = <0 78 0>;
-			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <4>;
-			samsung,power-domain = <&pd_cam>;
-			phys = <&mipi_phy 0>;
-			phy-names = "csis";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		csis_1: csis@11890000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11890000 0x4000>;
-			interrupts = <0 80 0>;
-			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <2>;
-			samsung,power-domain = <&pd_cam>;
-			phys = <&mipi_phy 2>;
-			phy-names = "csis";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	watchdog@10060000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		status = "disabled";
-	};
-
-	rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupts = <0 44 0>, <0 45 0>;
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
-
-	keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
-		clocks = <&clock CLK_KEYIF>;
-		clock-names = "keypad";
-		status = "disabled";
-	};
-
-	sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	exynos_usbphy: exynos-usbphy@125B0000 {
-		compatible = "samsung,exynos4210-usb2-phy";
-		reg = <0x125B0000 0x100>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-		clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		status = "disabled";
-	};
-
-	hsotg@12480000 {
-		compatible = "samsung,s3c6400-hsotg";
-		reg = <0x12480000 0x20000>;
-		interrupts = <0 71 0>;
-		clocks = <&clock CLK_USB_DEVICE>;
-		clock-names = "otg";
-		phys = <&exynos_usbphy 0>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	ehci@12580000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12580000 0x100>;
-		interrupts = <0 70 0>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-		    reg = <0>;
-		    phys = <&exynos_usbphy 1>;
-		    status = "disabled";
-		};
-		port@1 {
-		    reg = <1>;
-		    phys = <&exynos_usbphy 2>;
-		    status = "disabled";
-		};
-		port@2 {
-		    reg = <2>;
-		    phys = <&exynos_usbphy 3>;
-		    status = "disabled";
-		};
-	};
-
-	ohci@12590000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12590000 0x100>;
-		interrupts = <0 70 0>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-		    reg = <0>;
-		    phys = <&exynos_usbphy 1>;
-		    status = "disabled";
-		};
-	};
-
-	i2s1: i2s@13960000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x13960000 0x100>;
-		clocks = <&clock CLK_I2S1>;
-		clock-names = "iis";
-		dmas = <&pdma1 12>, <&pdma1 11>;
-		dma-names = "tx", "rx";
-		status = "disabled";
-	};
-
-	i2s2: i2s@13970000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x13970000 0x100>;
-		clocks = <&clock CLK_I2S2>;
-		clock-names = "iis";
-		dmas = <&pdma0 14>, <&pdma0 13>;
-		dma-names = "tx", "rx";
-		status = "disabled";
-	};
-
-	mfc: codec@13400000 {
-		compatible = "samsung,mfc-v5";
-		reg = <0x13400000 0x10000>;
-		interrupts = <0 94 0>;
-		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		status = "disabled";
-	};
-
-	serial_0: serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	serial_1: serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	serial_2: serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	serial_3: serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	i2c_0: i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@13870000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@13880000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@13890000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
-
-	i2c_4: i2c@138A0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
-
-	i2c_5: i2c@138B0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
-
-	i2c_6: i2c@138C0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
-
-	i2c_7: i2c@138D0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 7>, <&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 7>, <&pdma1 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		status = "disabled";
-	};
-
-	spi_2: spi@13940000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 9>, <&pdma0 8>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		status = "disabled";
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x139D0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma1: mdma@12850000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12850000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_MDMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-	};
-
-	fimd: fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
-		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
-		samsung,sysreg = <&sys_reg>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/exynos4210-origen.dts b/src/arm/exynos4210-origen.dts
deleted file mode 100644
index f767c425d0b5..000000000000
--- a/src/arm/exynos4210-origen.dts
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Samsung's Exynos4210 based Origen board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4210";
-	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x10000000
-		       0x50000000 0x10000000
-		       0x60000000 0x10000000
-		       0x70000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
-			enable-active-high;
-		};
-	};
-
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	tmu@100C0000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	sdhci@12510000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	g2d@12800000 {
-		status = "okay";
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	i2c@13860000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-
-		max8997_pmic@66 {
-			compatible = "maxim,max8997-pmic";
-			reg = <0x66>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <4 0>, <3 0>;
-
-			max8997,pmic-buck1-dvs-voltage = <1350000>;
-			max8997,pmic-buck2-dvs-voltage = <1100000>;
-			max8997,pmic-buck5-dvs-voltage = <1200000>;
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ABB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDD_ALIVE_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VMIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDD_RTC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD_AUD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt	= <3300000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "DVDD_SWB_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt	= <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD_PLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD_AUD_3V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt	= <3000000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "AVDD18_SWB_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDD_SWB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt	= <3300000>;
-					regulator-always-on;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "VDD_MIF_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt	= <1200000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					/*
-					* HACK: The real name is VDD_ARM_1.2V,
-					* but exynos-cpufreq does not support
-					* DT-based regulator lookup yet.
-					*/
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt	= <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VDD_INT_1.1V";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VDD_G3D_1.1V";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDDQ_M1M2_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "VDD_LCD_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		up {
-			label = "Up";
-			gpios = <&gpx2 0 1>;
-			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
-		};
-
-		down {
-			label = "Down";
-			gpios = <&gpx2 1 1>;
-			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpx1 7 1>;
-			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpx1 6 1>;
-			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpx1 5 1>;
-			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status {
-			gpios = <&gpx1 3 1>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
-	};
-};
diff --git a/src/arm/exynos4210-pinctrl.dtsi b/src/arm/exynos4210-pinctrl.dtsi
deleted file mode 100644
index a7c212891674..000000000000
--- a/src/arm/exynos4210-pinctrl.dtsi
+++ /dev/null
@@ -1,847 +0,0 @@
-/*
- * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2011-2012 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe2: gpe2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe3: gpe3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe4: gpe4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-6", "gpb-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_sync: lcd-sync {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_en: lcd-en {
-			samsung,pins = "gpe3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@11000000 {
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos4210-smdkv310.dts b/src/arm/exynos4210-smdkv310.dts
deleted file mode 100644
index 676e6e0c8cf3..000000000000
--- a/src/arm/exynos4210-smdkv310.dts
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Samsung's Exynos4210 based SMDKV310 board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Samsung's SMDKV310 board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-
-/ {
-	model = "Samsung smdkv310 evaluation board based on Exynos4210";
-	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		status = "okay";
-	};
-
-	g2d@12800000 {
-		status = "okay";
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-names = "default";
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		status = "okay";
-
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-
-		key_4 {
-			keypad,row = <0>;
-			keypad,column = <6>;
-			linux,code = <5>;
-		};
-
-		key_5 {
-			keypad,row = <0>;
-			keypad,column = <7>;
-			linux,code = <6>;
-		};
-
-		key_a {
-			keypad,row = <1>;
-			keypad,column = <3>;
-			linux,code = <30>;
-		};
-
-		key_b {
-			keypad,row = <1>;
-			keypad,column = <4>;
-			linux,code = <48>;
-		};
-
-		key_c {
-			keypad,row = <1>;
-			keypad,column = <5>;
-			linux,code = <46>;
-		};
-
-		key_d {
-			keypad,row = <1>;
-			keypad,column = <6>;
-			linux,code = <32>;
-		};
-
-		key_e {
-			keypad,row = <1>;
-			keypad,column = <7>;
-			linux,code = <18>;
-		};
-	};
-
-	i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <100000>;
-		status = "okay";
-
-		eeprom@50 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x50>;
-		};
-
-		eeprom@52 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x52>;
-		};
-	};
-
-	spi_2: spi@13940000 {
-		cs-gpios = <&gpc1 2 0>;
-		status = "okay";
-
-		w25x80@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <1000000>;
-
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <12000000>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4210-trats.dts b/src/arm/exynos4210-trats.dts
deleted file mode 100644
index f516da9e8b3a..000000000000
--- a/src/arm/exynos4210-trats.dts
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * Samsung's Exynos4210 based Trats board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-
-/ {
-	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
-			enable-active-high;
-		};
-
-		tsp_reg: regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_FIXED_VOLTAGES";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 0>;
-			enable-active-high;
-		};
-
-		cam_af_28v_reg: regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_AF_2.8V_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 0>;
-			enable-active-high;
-		};
-
-		cam_io_en_reg: regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_IO_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 0>;
-			enable-active-high;
-		};
-
-		cam_io_12v_reg: regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 0>;
-			enable-active-high;
-		};
-
-		vt_core_15v_reg: regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "VT_CORE_1.5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 0>;
-			enable-active-high;
-		};
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&vusb_reg>;
-		vusb_a-supply = <&vusbdac_reg>;
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-down-key {
-			gpios = <&gpx2 1 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		vol-up-key {
-			gpios = <&gpx2 0 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 1>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <10>;
-		};
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		mms114-touchscreen@48 {
-			compatible = "melfas,mms114";
-			reg = <0x48>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <4 2>;
-			x-size = <720>;
-			y-size = <1280>;
-			avdd-supply = <&tsp_reg>;
-			vdd-supply = <&tsp_reg>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		max8997_pmic@66 {
-			compatible = "maxim,max8997-pmic";
-
-			reg = <0x66>;
-
-			max8997,pmic-buck1-uses-gpio-dvs;
-			max8997,pmic-buck2-uses-gpio-dvs;
-			max8997,pmic-buck5-uses-gpio-dvs;
-
-			max8997,pmic-ignore-gpiodvs-side-effect;
-			max8997,pmic-buck125-default-dvs-idx = <0>;
-
-			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
-						         <&gpx0 6 0>,
-							 <&gpl0 0 0>;
-
-			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-							 <1250000>, <1200000>,
-							 <1150000>, <1100000>,
-							 <1000000>, <950000>;
-
-			max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-							 <950000>,  <900000>,
-							 <1100000>, <1000000>,
-							 <950000>,  <900000>;
-
-			max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			regulators {
-				valive_reg: LDO2 {
-				     regulator-name = "VALIVE_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				vusb_reg: LDO3 {
-				     regulator-name = "VUSB_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				};
-
-				vmipi_reg: LDO4 {
-				     regulator-name = "VMIPI_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vpda_reg: LDO6 {
-				     regulator-name = "VCC_1.8V_PDA";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				     regulator-always-on;
-				};
-
-				vcam_reg: LDO7 {
-				     regulator-name = "CAM_ISP_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vusbdac_reg: LDO8 {
-				     regulator-name = "VUSB/VDAC_3.3V_C210";
-				     regulator-min-microvolt = <3300000>;
-				     regulator-max-microvolt = <3300000>;
-				};
-
-				vccpda_reg: LDO9 {
-				     regulator-name = "VCC_2.8V_PDA";
-				     regulator-min-microvolt = <2800000>;
-				     regulator-max-microvolt = <2800000>;
-				     regulator-always-on;
-				};
-
-				vpll_reg: LDO10 {
-				     regulator-name = "VPLL_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				vtcam_reg: LDO12 {
-				     regulator-name = "VT_CAM_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vcclcd_reg: LDO13 {
-				     regulator-name = "VCC_3.3V_LCD";
-				     regulator-min-microvolt = <3300000>;
-				     regulator-max-microvolt = <3300000>;
-				};
-
-				vlcd_reg: LDO15 {
-				     regulator-name = "VLCD_2.2V";
-				     regulator-min-microvolt = <2200000>;
-				     regulator-max-microvolt = <2200000>;
-				};
-
-				camsensor_reg: LDO16 {
-				     regulator-name = "CAM_SENSOR_IO_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vddq_reg: LDO21 {
-				     regulator-name = "VDDQ_M1M2_1.2V";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				     regulator-always-on;
-				};
-
-				varm_breg: BUCK1 {
-				     /*
-				      * HACK: The real name is VARM_1.2V_C210,
-				      * but exynos-cpufreq does not support
-				      * DT-based regulator lookup yet.
-				      */
-				     regulator-name = "vdd_arm";
-				     regulator-min-microvolt = <900000>;
-				     regulator-max-microvolt = <1350000>;
-				     regulator-always-on;
-				};
-
-				vint_breg: BUCK2 {
-				     regulator-name = "VINT_1.1V_C210";
-				     regulator-min-microvolt = <900000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				camisp_breg: BUCK4 {
-				     regulator-name = "CAM_ISP_CORE_1.2V";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				};
-
-				vmem_breg: BUCK5 {
-				     regulator-name = "VMEM_1.2V_C210";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				     regulator-always-on;
-				};
-
-				vccsub_breg: BUCK7 {
-				     regulator-name = "VCC_SUB_2.0V";
-				     regulator-min-microvolt = <2000000>;
-				     regulator-max-microvolt = <2000000>;
-				     regulator-always-on;
-				};
-
-				safe1_sreg: ESAFEOUT1 {
-				     regulator-name = "SAFEOUT1";
-				     regulator-always-on;
-				};
-
-				safe2_sreg: ESAFEOUT2 {
-				     regulator-name = "SAFEOUT2";
-				     regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	dsi_0: dsi@11C80000 {
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		samsung,pll-clock-frequency = <24000000>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				dsi_out: endpoint {
-					remote-endpoint = <&dsi_in>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-				};
-			};
-		};
-
-		panel@0 {
-			reg = <0>;
-			compatible = "samsung,s6e8aa0";
-			vdd3-supply = <&vcclcd_reg>;
-			vci-supply = <&vlcd_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			power-on-delay= <50>;
-			reset-delay = <100>;
-			init-delay = <100>;
-			flip-horizontal;
-			flip-vertical;
-			panel-width-mm = <58>;
-			panel-height-mm = <103>;
-
-			display-timings {
-				timing-0 {
-					clock-frequency = <57153600>;
-					hactive = <720>;
-					vactive = <1280>;
-					hfront-porch = <5>;
-					hback-porch = <5>;
-					hsync-len = <5>;
-					vfront-porch = <13>;
-					vback-porch = <1>;
-					vsync-len = <2>;
-				};
-			};
-
-			port {
-				dsi_in: endpoint {
-					remote-endpoint = <&dsi_out>;
-				};
-			};
-		};
-	};
-
-	fimd@11c00000 {
-		status = "okay";
-	};
-
-	camera {
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-		status = "okay";
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/exynos4210-universal_c210.dts b/src/arm/exynos4210-universal_c210.dts
deleted file mode 100644
index d50eb3aa708e..000000000000
--- a/src/arm/exynos4210-universal_c210.dts
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * Samsung's Exynos4210 based Universal C210 board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Universal C210 board which is based on
- * Samsung's Exynos4210 rev0 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-
-/ {
-	model = "Samsung Universal C210 based on Exynos4210 rev0";
-	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
-	};
-
-	sysram@02020000 {
-		smp-sysram@0 {
-			status = "disabled";
-		};
-
-		smp-sysram@5000 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x5000 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			status = "disabled";
-		};
-	};
-
-	mct@10050000 {
-		compatible = "none";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	vemmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 0>;
-		enable-active-high;
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo3_reg>;
-		vusb_a-supply = <&ldo8_reg>;
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	sdhci_sd: sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo5_reg>;
-		cd-gpios = <&gpx3 4 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	ehci@12580000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	ohci@12590000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-up-key {
-			gpios = <&gpx2 0 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <1>;
-		};
-
-		vol-down-key {
-			gpios = <&gpx2 1 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <1>;
-		};
-
-		config-key {
-			gpios = <&gpx2 2 1>;
-			linux,code = <171>;
-			label = "config";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-
-		camera-key {
-			gpios = <&gpx2 3 1>;
-			linux,code = <212>;
-			label = "camera";
-			debounce-interval = <1>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 1>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <1>;
-		};
-	};
-
-	tsp_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "TSP_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 0>;
-		enable-active-high;
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		tsp@4a {
-			/* TBD: Atmel maXtouch touchscreen */
-			reg = <0x4a>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		vdd_arm_reg: pmic@60 {
-			compatible = "maxim,max8952";
-			reg = <0x60>;
-
-			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-			max8952,default-mode = <0>;
-			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-							<1050000>, <950000>;
-			max8952,sync-freq = <0>;
-			max8952,ramp-speed = <0>;
-
-			regulator-name = "vdd_arm";
-			regulator-min-microvolt = <770000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-							<&gpx0 6 0>;
-			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-							<1100000>, <1000000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "LDO6";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD+VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PS_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VHIC_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_I_HOST_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "CAM_S_ANA_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VCC_3.0V_LCD";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VINT_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VG3D_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "VMEM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ap32khz_reg: EN32KHz-AP {
-					regulator-name = "32KHz AP";
-					regulator-always-on;
-				};
-
-				cp32khz_reg: EN32KHz-CP {
-					regulator-name = "32KHz CP";
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	spi-lcd {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&gpy3 1 0>;
-		gpio-mosi = <&gpy3 3 0>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 0>;
-
-		lcd@0 {
-			compatible = "samsung,ld9040";
-			reg = <0>;
-			vdd3-supply = <&ldo7_reg>;
-			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
-			power-on-delay = <10>;
-			reset-delay = <10>;
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
-			display-timings {
-				timing {
-					clock-frequency = <23492370>;
-					hactive = <480>;
-					vactive = <800>;
-					hback-porch = <16>;
-					hfront-porch = <16>;
-					vback-porch = <2>;
-					vfront-porch = <28>;
-					hsync-len = <2>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <0>;
-					pixelclk-active = <0>;
-				};
-			};
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_dpi_ep>;
-				};
-			};
-		};
-	};
-
-	fimd: fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-		pinctrl-names = "default";
-		status = "okay";
-		samsung,invert-vden;
-		samsung,invert-vclk;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@3 {
-			reg = <3>;
-			fimd_dpi_ep: endpoint {
-				remote-endpoint = <&lcd_ep>;
-			};
-		};
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,s5p6440-pwm";
-		status = "okay";
-	};
-
-	camera {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-	};
-};
-
-&mdma1 {
-	reg = <0x12840000 0x1000>;
-};
diff --git a/src/arm/exynos4210.dtsi b/src/arm/exynos4210.dtsi
deleted file mode 100644
index 807bb5bf91fc..000000000000
--- a/src/arm/exynos4210.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Samsung's Exynos4210 SoC device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4.dtsi"
-#include "exynos4210-pinctrl.dtsi"
-
-/ {
-	compatible = "samsung,exynos4210", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-				"clkout4", "clkout8", "clkout9";
-		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-			<&clock CLK_XUSBXTI>;
-		#clock-cells = <1>;
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x20000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x1f000 0x1000>;
-		};
-	};
-
-	pd_lcd1: lcd1-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <16>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
-	};
-
-	mct@10050000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &gic 0 69 0>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 0 42 0>,
-					<5 &gic 0 48 0>;
-		};
-	};
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4210-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x03860000 0x1000>;
-	};
-
-	tmu@100C0000 {
-		compatible = "samsung,exynos4210-tmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x100C0000 0x100>;
-		interrupts = <2 4>;
-		clocks = <&clock CLK_TMU_APBIF>;
-		clock-names = "tmu_apbif";
-		status = "disabled";
-	};
-
-	g2d@12800000 {
-		compatible = "samsung,s5pv210-g2d";
-		reg = <0x12800000 0x1000>;
-		interrupts = <0 89 0>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		status = "disabled";
-	};
-
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-		fimc_0: fimc@11800000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
-		};
-
-		fimc_1: fimc@11810000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
-		};
-
-		fimc_2: fimc@11820000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
-		};
-
-		fimc_3: fimc@11830000 {
-			samsung,pix-limits = <1920 8192 1366 1920>;
-			samsung,rotators = <0>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
-		};
-	};
-};
diff --git a/src/arm/exynos4212.dtsi b/src/arm/exynos4212.dtsi
deleted file mode 100644
index 3c00e6ec9302..000000000000
--- a/src/arm/exynos4212.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Samsung's Exynos4212 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4x12.dtsi"
-
-/ {
-	compatible = "samsung,exynos4212", "samsung,exynos4";
-
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <18>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
-	};
-};
diff --git a/src/arm/exynos4412-odroid-common.dtsi b/src/arm/exynos4412-odroid-common.dtsi
deleted file mode 100644
index adadaf97ac01..000000000000
--- a/src/arm/exynos4412-odroid-common.dtsi
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
- * device tree source
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/input/input.h>
-#include "exynos4412.dtsi"
-
-/ {
-	firmware@0204F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_power_key>;
-
-		power_key {
-			interrupt-parent = <&gpx1>;
-			interrupts = <3 0>;
-			gpios = <&gpx1 3 1>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		pinctrl-0 = <&i2s0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			 <&clock_audss EXYNOS_DOUT_AUD_BUS>;
-		clock-names = "iis", "i2s_opclk0";
-	};
-
-	sound: sound {
-		compatible = "samsung,odroidx2-audio";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98090>;
-	};
-
-	mmc@12550000 {
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo20_reg &buck8_reg>;
-		status = "okay";
-
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	g2d@10800000 {
-		status = "okay";
-	};
-
-	camera {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo4_reg &ldo21_reg>;
-		cd-gpios = <&gpk2 2 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	i2c@13860000 {
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <400000>;
-		status = "okay";
-
-		usb3503: usb3503@08 {
-			compatible = "smsc,usb3503";
-			reg = <0x08>;
-
-			intn-gpios = <&gpx3 0 0>;
-			connect-gpios = <&gpx3 4 0>;
-			reset-gpios = <&gpx3 5 0>;
-			initial-mode = <1>;
-		};
-
-		max77686: pmic@09 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&max77686_irq>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDDQ_M1_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDDQ_EXT_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDDQ_MMC2_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDDQ_MMC1_3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD10_MPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD10_XPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD18_ABB1_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD33_USB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDQ_C2C_W_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB0_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_HSIC_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "LDO20_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "LDO21_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "VDDQ_LCD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-microvolt-offset = <50000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDDQ_CKEM1_2_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "BUCK6_1.35V";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "BUCK7_2.0V";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "BUCK8_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-			};
-		};
-	};
-
-	i2c@13870000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "okay";
-		max98090: max98090@10 {
-			compatible = "maxim,max98090";
-			reg = <0x10>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <0 0>;
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	hsotg@12480000 {
-		status = "okay";
-		vusb_d-supply = <&ldo15_reg>;
-		vusb_a-supply = <&ldo12_reg>;
-	};
-
-	ehci: ehci@12580000 {
-		status = "okay";
-	};
-};
-
-&pinctrl_1 {
-	gpio_power_key: power_key {
-		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <0>;
-	};
-
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
diff --git a/src/arm/exynos4412-odroidu3.dts b/src/arm/exynos4412-odroidu3.dts
deleted file mode 100644
index c8a64be55d07..000000000000
--- a/src/arm/exynos4412-odroidu3.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
- *
- * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Device tree source file for Hardkernel's ODROID-U3 board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-U3 board based on Exynos4412";
-	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x7FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&usb3503 {
-	clock-names = "refclk";
-	clocks = <&pmu_system_controller 0>;
-	refclk-frequency = <24000000>;
-};
-
-&ehci {
-	port@1 {
-		status = "okay";
-	};
-	port@2 {
-		status = "okay";
-	};
-};
-
-&sound {
-	compatible = "samsung,odroidu3-audio";
-	samsung,model = "Odroid-U3";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"Headphone Jack", "MICBIAS",
-		"IN1", "Headphone Jack",
-		"Speakers", "SPKL",
-		"Speakers", "SPKR";
-};
diff --git a/src/arm/exynos4412-odroidx.dts b/src/arm/exynos4412-odroidx.dts
deleted file mode 100644
index cb1cfe7239c4..000000000000
--- a/src/arm/exynos4412-odroidx.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-X board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-X board based on Exynos4412";
-	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x3FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led2 {
-			label = "led2:mmc0";
-			gpios = <&gpc1 2 1>;
-			default-state = "on";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	gpio_keys {
-		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
-		home_key {
-			interrupt-parent = <&gpx2>;
-			interrupts = <2 0>;
-			gpios = <&gpx2 2 0>;
-			linux,code = <KEY_HOME>;
-			label = "home key";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	regulator_p3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 1>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&ehci {
-	port@1 {
-		status = "okay";
-	};
-};
-
-&pinctrl_1 {
-	gpio_home_key: home_key {
-		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <0>;
-	};
-};
diff --git a/src/arm/exynos4412-odroidx2.dts b/src/arm/exynos4412-odroidx2.dts
deleted file mode 100644
index 96b43f4497cc..000000000000
--- a/src/arm/exynos4412-odroidx2.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X2 board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4412-odroidx.dts"
-
-/ {
-	model = "Hardkernel ODROID-X2 board based on Exynos4412";
-	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x7FF00000>;
-	};
-};
-
-&sound {
-	samsung,model = "Odroid-X2";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
-};
diff --git a/src/arm/exynos4412-origen.dts b/src/arm/exynos4412-origen.dts
deleted file mode 100644
index e925c9fbfb07..000000000000
--- a/src/arm/exynos4412-origen.dts
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Insignal's Exynos4412 based Origen board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4412";
-	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs ="console=ttySAC2,115200";
-	};
-
-	firmware@0203F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
-			enable-active-high;
-		};
-	};
-
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <3>;
-		samsung,keypad-num-columns = <2>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		key_home {
-			keypad,row = <0>;
-			keypad,column = <0>;
-			linux,code = <KEY_HOME>;
-		};
-
-		key_down {
-			keypad,row = <0>;
-			keypad,column = <1>;
-			linux,code = <KEY_DOWN>;
-		};
-
-		key_up {
-			keypad,row = <1>;
-			keypad,column = <0>;
-			linux,code = <KEY_UP>;
-		};
-
-		key_menu {
-			keypad,row = <1>;
-			keypad,column = <1>;
-			linux,code = <KEY_MENU>;
-		};
-
-		key_back {
-			keypad,row = <2>;
-			keypad,column = <0>;
-			linux,code = <KEY_BACK>;
-		};
-
-		key_enter {
-			keypad,row = <2>;
-			keypad,column = <1>;
-			linux,code = <KEY_ENTER>;
-		};
-	};
-
-	g2d@10800000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	mmc@12550000 {
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		s5m8767_pmic@66 {
-			compatible = "samsung,s5m8767-pmic";
-			reg = <0x66>;
-
-			s5m8767,pmic-buck-default-dvs-idx = <3>;
-
-			s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
-							 <&gpx2 4 0>,
-							 <&gpx2 5 0>;
-
-			s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
-							<&gpm3 6 0>,
-							<&gpm3 7 0>;
-
-			s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-							 <1100000>, <1100000>,
-							 <1100000>, <1100000>,
-							 <1100000>, <1100000>;
-
-			s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDDQ_M12";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDDIOAP_18";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDDQ_PRE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDD18_2M";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD10_MPLL";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD10_XPLL";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VDD10_MIPI";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VDD33_LCD";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD18_MIPI";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD18_ABB1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD33_UOTG";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDIOPERI_18";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB02";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_USH";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDDIOAP_MMC012_28";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "VDDIOPERI_28";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "DVDD25";
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "VDD28_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "VDD28_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo22_reg: LDO22 {
-					regulator-name = "VDDA28_2M";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "VDD28_TF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "VDD33_A31";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "VDD18_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "VDD18_A31";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo27_reg: LDO27 {
-					regulator-name = "GPS_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo28_reg: LDO28 {
-					regulator-name = "DVDD12";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "vdd_m12";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "vdd12_5m";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "vddf28_emmc";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4412-smdk4412.dts b/src/arm/exynos4412-smdk4412.dts
deleted file mode 100644
index ded0b70f7644..000000000000
--- a/src/arm/exynos4412-smdk4412.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Samsung's Exynos4412 based SMDK board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's SMDK4412 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-
-/ {
-	model = "Samsung SMDK evaluation board based on Exynos4412";
-	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-	};
-
-	g2d@10800000 {
-		status = "okay";
-	};
-
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <3>;
-		samsung,keypad-num-columns = <8>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		key_1 {
-			keypad,row = <1>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <1>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <1>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-
-		key_4 {
-			keypad,row = <1>;
-			keypad,column = <6>;
-			linux,code = <5>;
-		};
-
-		key_5 {
-			keypad,row = <1>;
-			keypad,column = <7>;
-			linux,code = <6>;
-		};
-
-		key_A {
-			keypad,row = <2>;
-			keypad,column = <6>;
-			linux,code = <30>;
-		};
-
-		key_B {
-			keypad,row = <2>;
-			keypad,column = <7>;
-			linux,code = <48>;
-		};
-
-		key_C {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <46>;
-		};
-
-		key_D {
-			keypad,row = <2>;
-			keypad,column = <5>;
-			linux,code = <32>;
-		};
-
-		key_E {
-			keypad,row = <0>;
-			keypad,column = <7>;
-			linux,code = <18>;
-		};
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4412-tiny4412.dts b/src/arm/exynos4412-tiny4412.dts
deleted file mode 100644
index ea6929d9c621..000000000000
--- a/src/arm/exynos4412-tiny4412.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * FriendlyARM's Exynos4412 based TINY4412 board device tree source
- *
- * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
- *
- * Device tree source file for FriendlyARM's TINY4412 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-
-/ {
-	model = "FriendlyARM TINY4412 board based on Exynos4412";
-	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&gpm4 0 1>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpm4 1 1>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "led3";
-			gpios = <&gpm4 2 1>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "led4";
-			gpios = <&gpm4 3 1>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4412-trats2.dts b/src/arm/exynos4412-trats2.dts
deleted file mode 100644
index 11967f4561e0..000000000000
--- a/src/arm/exynos4412-trats2.dts
+++ /dev/null
@@ -1,788 +0,0 @@
-/*
- * Samsung's Exynos4412 based Trats 2 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats 2 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-
-/ {
-	model = "Samsung Trats 2 based on Exynos4412";
-	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		i2c9 = &i2c_ak8975;
-		i2c10 = &i2c_cm36651;
-	};
-
-	memory {
-		reg =  <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-	};
-
-	firmware@0204F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
-			enable-active-high;
-		};
-
-		cam_io_reg: voltage-regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_SENSOR_A";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 2 0>;
-			enable-active-high;
-		};
-
-		lcd_vdd3_reg: voltage-regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "LCD_VDD_2.2V";
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			gpio = <&gpc0 1 0>;
-			enable-active-high;
-		};
-
-		cam_af_reg: voltage-regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_AF";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 4 0>;
-			enable-active-high;
-		};
-
-		cam_isp_core_reg: voltage-regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_ISP_CORE_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpm0 3 0>;
-			enable-active-high;
-			regulator-always-on;
-		};
-
-		ps_als_reg: voltage-regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "LED_A_3.0V";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpj0 5 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-down {
-			gpios = <&gpx3 3 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		key-up {
-			gpios = <&gpx2 2 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		key-power {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-
-		key-ok {
-			gpios = <&gpx0 1 1>;
-			linux,code = <139>;
-			label = "ok";
-			debounce-inteval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	adc: adc@126C0000 {
-		vdd-supply = <&ldo3_reg>;
-		status = "okay";
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		mms114-touchscreen@48 {
-			compatible = "melfas,mms114";
-			reg = <0x48>;
-			interrupt-parent = <&gpm2>;
-			interrupts = <3 2>;
-			x-size = <720>;
-			y-size = <1280>;
-			avdd-supply = <&ldo23_reg>;
-			vdd-supply = <&ldo24_reg>;
-		};
-	};
-
-	i2c_0: i2c@13860000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		s5c73m3@3c {
-			compatible = "samsung,s5c73m3";
-			reg = <0x3c>;
-			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
-			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
-			vdd-int-supply = <&buck9_reg>;
-			vddio-cis-supply = <&ldo9_reg>;
-			vdda-supply = <&ldo17_reg>;
-			vddio-host-supply = <&ldo18_reg>;
-			vdd-af-supply = <&cam_af_reg>;
-			vdd-reg-supply = <&cam_io_reg>;
-			clock-frequency = <24000000>;
-			/* CAM_A_CLKOUT */
-			clocks = <&camera 0>;
-			clock-names = "cis_extclk";
-			port {
-				s5c73m3_ep: endpoint {
-					remote-endpoint = <&csis0_ep>;
-					data-lanes = <1 2 3 4>;
-				};
-			};
-		};
-	};
-
-	i2c@138D0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c7_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		max77686_pmic@09 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&gpx0>;
-			interrupts = <7 0>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: ldo1 {
-					regulator-compatible = "LDO1";
-					regulator-name = "VALIVE_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo2_reg: ldo2 {
-					regulator-compatible = "LDO2";
-					regulator-name = "VM1M2_1.2V_AP";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo3_reg: ldo3 {
-					regulator-compatible = "LDO3";
-					regulator-name = "VCC_1.8V_AP";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo4_reg: ldo4 {
-					regulator-compatible = "LDO4";
-					regulator-name = "VCC_2.8V_AP";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo5_reg: ldo5 {
-					regulator-compatible = "LDO5";
-					regulator-name = "VCC_1.8V_IO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo6_reg: ldo6 {
-					regulator-compatible = "LDO6";
-					regulator-name = "VMPLL_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo7_reg: ldo7 {
-					regulator-compatible = "LDO7";
-					regulator-name = "VPLL_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo8_reg: ldo8 {
-					regulator-compatible = "LDO8";
-					regulator-name = "VMIPI_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
-				};
-
-				ldo9_reg: ldo9 {
-					regulator-compatible = "LDO9";
-					regulator-name = "CAM_ISP_MIPI_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
-				};
-
-				ldo10_reg: ldo10 {
-					regulator-compatible = "LDO10";
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
-				};
-
-				ldo11_reg: ldo11 {
-					regulator-compatible = "LDO11";
-					regulator-name = "VABB1_1.95V";
-					regulator-min-microvolt = <1950000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				ldo12_reg: ldo12 {
-					regulator-compatible = "LDO12";
-					regulator-name = "VUOTG_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-mem-off;
-				};
-
-				ldo13_reg: ldo13 {
-					regulator-compatible = "LDO13";
-					regulator-name = "NFC_AVDD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo14_reg: ldo14 {
-					regulator-compatible = "LDO14";
-					regulator-name = "VABB2_1.95V";
-					regulator-min-microvolt = <1950000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				ldo15_reg: ldo15 {
-					regulator-compatible = "LDO15";
-					regulator-name = "VHSIC_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
-				};
-
-				ldo16_reg: ldo16 {
-					regulator-compatible = "LDO16";
-					regulator-name = "VHSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
-				};
-
-				ldo17_reg: ldo17 {
-					regulator-compatible = "LDO17";
-					regulator-name = "CAM_SENSOR_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
-				};
-
-				ldo18_reg: ldo18 {
-					regulator-compatible = "LDO18";
-					regulator-name = "CAM_ISP_SEN_IO_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo19_reg: ldo19 {
-					regulator-compatible = "LDO19";
-					regulator-name = "VT_CAM_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo20_reg: ldo20 {
-					regulator-compatible = "LDO20";
-					regulator-name = "VDDQ_PRE_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo21_reg: ldo21 {
-					regulator-compatible = "LDO21";
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
-				};
-
-				ldo22_reg: ldo22 {
-					regulator-compatible = "LDO22";
-					regulator-name = "VMEM_VDD_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				ldo23_reg: ldo23 {
-					regulator-compatible = "LDO23";
-					regulator-name = "TSP_AVDD_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-mem-idle;
-				};
-
-				ldo24_reg: ldo24 {
-					regulator-compatible = "LDO24";
-					regulator-name = "TSP_VDD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo25_reg: ldo25 {
-					regulator-compatible = "LDO25";
-					regulator-name = "LCD_VCC_3.3V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
-				};
-
-				ldo26_reg: ldo26 {
-					regulator-compatible = "LDO26";
-					regulator-name = "MOTOR_VCC_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-mem-idle;
-				};
-
-				buck1_reg: buck1 {
-					regulator-compatible = "BUCK1";
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck2_reg: buck2 {
-					regulator-compatible = "BUCK2";
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck3_reg: buck3 {
-					regulator-compatible = "BUCK3";
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck4_reg: buck4 {
-					regulator-compatible = "BUCK4";
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck5_reg: buck5 {
-					regulator-compatible = "BUCK5";
-					regulator-name = "VMEM_1.2V_AP";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck6_reg: buck6 {
-					regulator-compatible = "BUCK6";
-					regulator-name = "VCC_SUB_1.35V";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: buck7 {
-					regulator-compatible = "BUCK7";
-					regulator-name = "VCC_SUB_2.0V";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: buck8 {
-					regulator-compatible = "BUCK8";
-					regulator-name = "VMEM_VDDF_3.0V";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				buck9_reg: buck9 {
-					regulator-compatible = "BUCK9";
-					regulator-name = "CAM_ISP_CORE_1.2V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-mem-off;
-				};
-			};
-		};
-	};
-
-	mmc@12550000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		non-removable;
-		card-detect-delay = <200>;
-		vmmc-supply = <&vemmc_reg>;
-		clock-frequency = <400000000>;
-		samsung,dw-mshc-ciu-div = <0>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	i2c_ak8975: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		ak8975@0c {
-			compatible = "asahi-kasei,ak8975";
-			reg = <0x0c>;
-			gpios = <&gpj0 7 0>;
-		};
-	};
-
-	i2c_cm36651: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cm36651@18 {
-			compatible = "capella,cm36651";
-			reg = <0x18>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <2 2>;
-			vled-supply = <&ps_als_reg>;
-		};
-	};
-
-	spi_1: spi@13930000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		cs-gpios = <&gpb 5 0>;
-		status = "okay";
-
-		s5c73m3_spi: s5c73m3 {
-			compatible = "samsung,s5c73m3";
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-			controller-data {
-				samsung,spi-feedback-delay = <2>;
-			};
-		};
-	};
-
-	dsi_0: dsi@11C80000 {
-		vddcore-supply = <&ldo8_reg>;
-		vddio-supply = <&ldo10_reg>;
-		samsung,pll-clock-frequency = <24000000>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				dsi_out: endpoint {
-					remote-endpoint = <&dsi_in>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-				};
-			};
-		};
-
-		panel@0 {
-			compatible = "samsung,s6e8aa0";
-			reg = <0>;
-			vdd3-supply = <&lcd_vdd3_reg>;
-			vci-supply = <&ldo25_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			power-on-delay= <50>;
-			reset-delay = <100>;
-			init-delay = <100>;
-			flip-horizontal;
-			flip-vertical;
-			panel-width-mm = <58>;
-			panel-height-mm = <103>;
-
-			display-timings {
-				timing-0 {
-					clock-frequency = <0>;
-					hactive = <720>;
-					vactive = <1280>;
-					hfront-porch = <5>;
-					hback-porch = <5>;
-					hsync-len = <5>;
-					vfront-porch = <13>;
-					vback-porch = <1>;
-					vsync-len = <2>;
-				};
-			};
-
-			port {
-				dsi_in: endpoint {
-					remote-endpoint = <&dsi_out>;
-				};
-			};
-		};
-	};
-
-	fimd@11c00000 {
-		status = "okay";
-	};
-
-	camera: camera {
-		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-
-		csis_0: csis@11880000 {
-			status = "okay";
-			vddcore-supply = <&ldo8_reg>;
-			vddio-supply = <&ldo10_reg>;
-			clock-frequency = <176000000>;
-
-			/* Camera C (3) MIPI CSI-2 (CSIS0) */
-			port@3 {
-				reg = <3>;
-				csis0_ep: endpoint {
-					remote-endpoint = <&s5c73m3_ep>;
-					data-lanes = <1 2 3 4>;
-					samsung,csis-hs-settle = <12>;
-				};
-			};
-		};
-
-		csis_1: csis@11890000 {
-			vddcore-supply = <&ldo8_reg>;
-			vddio-supply = <&ldo10_reg>;
-			clock-frequency = <160000000>;
-			status = "okay";
-
-			/* Camera D (4) MIPI CSI-2 (CSIS1) */
-			port@4 {
-				reg = <4>;
-				csis1_ep: endpoint {
-					remote-endpoint = <&is_s5k6a3_ep>;
-					data-lanes = <1>;
-					samsung,csis-hs-settle = <18>;
-					samsung,csis-wclk;
-				};
-			};
-		};
-
-		fimc_lite_0: fimc-lite@12390000 {
-			status = "okay";
-		};
-
-		fimc_lite_1: fimc-lite@123A0000 {
-			status = "okay";
-		};
-
-		fimc-is@12000000 {
-			pinctrl-0 = <&fimc_is_uart>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			i2c1_isp: i2c-isp@12140000 {
-				pinctrl-0 = <&fimc_is_i2c1>;
-				pinctrl-names = "default";
-
-				s5k6a3@10 {
-					compatible = "samsung,s5k6a3";
-					reg = <0x10>;
-					svdda-supply = <&cam_io_reg>;
-					svddio-supply = <&ldo19_reg>;
-					afvdd-supply = <&ldo19_reg>;
-					clock-frequency = <24000000>;
-					/* CAM_B_CLKOUT */
-					clocks = <&camera 1>;
-					clock-names = "extclk";
-					samsung,camclk-out = <1>;
-					gpios = <&gpm1 6 0>;
-
-					port {
-						is_s5k6a3_ep: endpoint {
-							remote-endpoint = <&csis1_ep>;
-							data-lanes = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo15_reg>;
-		vusb_a-supply = <&ldo12_reg>;
-		status = "okay";
-	};
-
-	thermistor-ap@0 {
-		compatible = "ntc,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 1>;  /* AP temperature */
-	};
-
-	thermistor-battery@1 {
-		compatible = "ntc,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 2>;  /* Battery temperature */
-	};
-};
diff --git a/src/arm/exynos4412.dtsi b/src/arm/exynos4412.dtsi
deleted file mode 100644
index d8bc059e172f..000000000000
--- a/src/arm/exynos4412.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Samsung's Exynos4412 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4x12.dtsi"
-
-/ {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <20>;
-	};
-
-	pmu {
-		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x4000>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4412-pmu", "syscon";
-	};
-};
diff --git a/src/arm/exynos4x12-pinctrl.dtsi b/src/arm/exynos4x12-pinctrl.dtsi
deleted file mode 100644
index 99b26df8dbc7..000000000000
--- a/src/arm/exynos4x12-pinctrl.dtsi
+++ /dev/null
@@ -1,956 +0,0 @@
-/*
- * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-0", "gpb-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		mipi0_clk: mipi0-clk {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		mipi1_clk: mipi1-clk {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ldi: lcd-ldi {
-			samsung,pins = "gpf3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@11000000 {
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm0: gpm0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm1: gpm1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm2: gpm2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm3: gpm3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm4: gpm4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_b_io: cam-port-b-io {
-			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_b_clk_active: cam-port-b-clk-active {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_b_clk_idle: cam-port-b-clk-idle {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_i2c0: fimc-is-i2c0 {
-			samsung,pins = "gpm4-0", "gpm4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_i2c1: fimc-is-i2c1 {
-			samsung,pins = "gpm4-2", "gpm4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_uart: fimc-is-uart {
-			samsung,pins = "gpm3-5", "gpm3-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@106E0000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_bus: c2c-bus {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-					"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-					"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-					"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-					"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-					"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-					"gpv4-0", "gpv4-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos4x12.dtsi b/src/arm/exynos4x12.dtsi
deleted file mode 100644
index 861bb919f6d3..000000000000
--- a/src/arm/exynos4x12.dtsi
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Samsung's Exynos4x12 SoCs device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4.dtsi"
-#include "exynos4x12-pinctrl.dtsi"
-
-/ {
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x40000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
-		};
-	};
-
-	pd_isp: isp-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-	};
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4412-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	mct@10050000 {
-		compatible = "samsung,exynos4412-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &combiner 12 5>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 1 12 0>;
-		};
-	};
-
-	combiner: interrupt-controller@10440000 {
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	adc: adc@126C0000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 3>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		status = "disabled";
-	};
-
-	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 0>;
-	};
-
-	pinctrl_3: pinctrl@106E0000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x106E0000 0x1000>;
-		interrupts = <0 72 0>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4212-pmu", "syscon";
-		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-				"clkout4", "clkout8", "clkout9";
-		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-			<&clock CLK_XUSBXTI>;
-		#clock-cells = <1>;
-	};
-
-	g2d@10800000 {
-		compatible = "samsung,exynos4212-g2d";
-		reg = <0x10800000 0x1000>;
-		interrupts = <0 89 0>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		status = "disabled";
-	};
-
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,cam-if;
-		};
-
-		fimc_1: fimc@11810000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,cam-if;
-		};
-
-		fimc_2: fimc@11820000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,lcd-wb;
-			samsung,cam-if;
-		};
-
-		fimc_3: fimc@11830000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <1920 8192 1366 1920>;
-			samsung,rotators = <0>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,lcd-wb;
-		};
-
-		fimc_lite_0: fimc-lite@12390000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x12390000 0x1000>;
-			interrupts = <0 105 0>;
-			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>;
-			clock-names = "flite";
-			status = "disabled";
-		};
-
-		fimc_lite_1: fimc-lite@123A0000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x123A0000 0x1000>;
-			interrupts = <0 106 0>;
-			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE1>;
-			clock-names = "flite";
-			status = "disabled";
-		};
-
-		fimc_is: fimc-is@12000000 {
-			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
-			reg = <0x12000000 0x260000>;
-			interrupts = <0 90 0>, <0 95 0>;
-			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>,
-				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
-				 <&clock CLK_PPMUISPMX>,
-				 <&clock CLK_MOUT_MPLL_USER_T>,
-				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
-				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
-				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
-				 <&clock CLK_DIV_MCUISP0>,
-				 <&clock CLK_DIV_MCUISP1>,
-				 <&clock CLK_SCLK_UART_ISP>,
-				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>,
-				 <&clock CLK_DIV_ACLK400_MCUISP>;
-			clock-names = "lite0", "lite1", "ppmuispx",
-				      "ppmuispmx", "mpll", "isp",
-				      "drc", "fd", "mcuisp",
-				      "ispdiv0", "ispdiv1", "mcuispdiv0",
-				      "mcuispdiv1", "uart", "aclk200",
-				      "div_aclk200", "aclk400mcuisp",
-				      "div_aclk400mcuisp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			pmu {
-				reg = <0x10020000 0x3000>;
-			};
-
-			i2c1_isp: i2c-isp@12140000 {
-				compatible = "samsung,exynos4212-i2c-isp";
-				reg = <0x12140000 0x100>;
-				clocks = <&clock CLK_I2C1_ISP>;
-				clock-names = "i2c_isp";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	mshc_0: mmc@12550000 {
-		compatible = "samsung,exynos4412-dw-mshc";
-		reg = <0x12550000 0x1000>;
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fifo-depth = <0x80>;
-		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-		clock-names = "biu", "ciu";
-		status = "disabled";
-	};
-
-	exynos-usbphy@125B0000 {
-		compatible = "samsung,exynos4x12-usb2-phy";
-		samsung,sysreg-phandle = <&sys_reg>;
-	};
-};
diff --git a/src/arm/exynos5.dtsi b/src/arm/exynos5.dtsi
deleted file mode 100644
index a0cc0b6f8f96..000000000000
--- a/src/arm/exynos5.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Samsung's Exynos5 SoC series common device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
- * SoCs from Exynos5 series can include this file and provide values for SoCs
- * specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-	};
-
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
-
-	gic: interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x10481000 0x1000>,
-			<0x10482000 0x1000>,
-			<0x10484000 0x2000>,
-			<0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	serial_0: serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-	};
-
-	serial_1: serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial_2: serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial_3: serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	rtc@101E0000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
-		status = "disabled";
-	};
-
-	fimd@14400000 {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
-		samsung,sysreg = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	dp-controller@145B0000 {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145B0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/exynos5250-arndale.dts b/src/arm/exynos5250-arndale.dts
deleted file mode 100644
index d0de1f50d15b..000000000000
--- a/src/arm/exynos5250-arndale.dts
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * Samsung's Exynos5250 based Arndale board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5250.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Arndale evaluation board based on EXYNOS5250";
-	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	i2c@12C60000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		samsung,i2c-slave-addr = <0x66>;
-		status = "okay";
-
-		s5m8767_pmic@66 {
-			compatible = "samsung,s5m8767-pmic";
-			reg = <0x66>;
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-			vinb1-supply = <&main_dc_reg>;
-			vinb2-supply = <&main_dc_reg>;
-			vinb3-supply = <&main_dc_reg>;
-			vinb4-supply = <&main_dc_reg>;
-			vinb5-supply = <&main_dc_reg>;
-			vinb6-supply = <&main_dc_reg>;
-			vinb7-supply = <&main_dc_reg>;
-			vinb8-supply = <&main_dc_reg>;
-			vinb9-supply = <&main_dc_reg>;
-
-			vinl1-supply = <&buck7_reg>;
-			vinl2-supply = <&buck7_reg>;
-			vinl3-supply = <&buck7_reg>;
-			vinl4-supply = <&main_dc_reg>;
-			vinl5-supply = <&main_dc_reg>;
-			vinl6-supply = <&main_dc_reg>;
-			vinl7-supply = <&main_dc_reg>;
-			vinl8-supply = <&buck8_reg>;
-			vinl9-supply = <&buck8_reg>;
-
-			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-			s5m8767,pmic-buck4-dvs-voltage = <1200000>;
-			s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
-							<&gpd1 1 0>,
-							<&gpd1 2 0>;
-			s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
-							<&gpx2 4 0>,
-							<&gpx2 5 0>;
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE_1.0V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDD_28IO_DP_1.35V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDD_COMMON1_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDD_IOPERI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDD_EXT_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD_MPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD_XPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VDD_COMMON2_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VDD_33ON_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					op_mode = <1>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD_COMMON3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD_ABB2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD_USB_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDQ_C2C_W_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB0_3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_COMMON4_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDDQ_MMC2_3_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "VDD_33ON_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					op_mode = <1>;
-				};
-
-				ldo22_reg: LDO22 {
-					regulator-name = "EXT_33_OFF";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					op_mode = <1>;
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "EXT_28_OFF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					op_mode = <1>;
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "PVDD_LDO25";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					op_mode = <1>;
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "EXT_18_OFF";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					op_mode = <1>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <912500>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDD_MEM_1.35V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1355000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "PVDD_BUCK7";
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "PVDD_BUCK8";
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "VDD_33_OFF_EXT1";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <3000000>;
-					op_mode = <1>;
-				};
-			};
-		};
-	};
-
-	i2c@12C80000 {
-		status = "okay";
-
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		samsung,i2c-slave-addr = <0x50>;
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12C90000 {
-		status = "okay";
-
-		wm1811a@1a {
-
-			compatible = "wlf,wm1811";
-			reg = <0x1a>;
-
-			AVDD2-supply = <&main_dc_reg>;
-			CPVDD-supply = <&main_dc_reg>;
-			DBVDD1-supply = <&main_dc_reg>;
-			DBVDD2-supply = <&main_dc_reg>;
-			DBVDD3-supply = <&main_dc_reg>;
-			LDO1VDD-supply = <&main_dc_reg>;
-			SPKVDD1-supply = <&main_dc_reg>;
-			SPKVDD2-supply = <&main_dc_reg>;
-
-			wlf,ldo1ena = <&gpb0 0 0>;
-			wlf,ldo2ena = <&gpb0 1 0>;
-		};
-	};
-
-	i2c@12CE0000 {
-		status = "okay";
-
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		samsung,i2c-slave-addr = <0x38>;
-
-		hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	i2c@121D0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <40000>;
-		samsung,i2c-slave-addr = <0x38>;
-
-		sata_phy_i2c:sata-phy@38 {
-			compatible = "samsung,exynos-sataphy-i2c";
-			reg = <0x38>;
-		};
-	};
-
-	sata@122F0000 {
-		status = "okay";
-	};
-
-	sata-phy@12170000 {
-		status = "okay";
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-	};
-
-	mmc_0: mmc@12200000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		vmmc-supply = <&mmc_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc_2: mmc@12220000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		vmmc-supply = <&mmc_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		menu {
-			label = "SW-TACT2";
-			gpios = <&gpx1 4 1>;
-			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
-		};
-
-		home {
-			label = "SW-TACT3";
-			gpios = <&gpx1 5 1>;
-			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
-		};
-
-		up {
-			label = "SW-TACT4";
-			gpios = <&gpx1 6 1>;
-			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
-		};
-
-		down {
-			label = "SW-TACT5";
-			gpios = <&gpx1 7 1>;
-			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
-		};
-
-		back {
-			label = "SW-TACT6";
-			gpios = <&gpx2 0 1>;
-			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
-		};
-
-		wakeup {
-			label = "SW-TACT7";
-			gpios = <&gpx2 1 1>;
-			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
-		};
-	};
-
-	hdmi {
-		hpd-gpio = <&gpx3 7 2>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-		vdd-supply = <&ldo8_reg>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		main_dc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "MAIN_DC";
-		};
-
-		mmc_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_33ON_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 1>;
-			enable-active-high;
-		};
-
-		reg_hdmi_en: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdmi-en";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	dp-controller@145B0000 {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-		status = "okay";
-	};
-
-	fimd: fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				/* 2560x1600 DP panel */
-				clock-frequency = <50000>;
-				hactive = <2560>;
-				vactive = <1600>;
-				hfront-porch = <48>;
-				hback-porch = <80>;
-				hsync-len = <32>;
-				vback-porch = <16>;
-				vfront-porch = <8>;
-				vsync-len = <6>;
-			};
-		};
-	};
-
-	usb_hub_bus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		// SMSC USB3503 connected in hardware only mode as a PHY
-		usb_hub: usb_hub {
-			compatible = "smsc,usb3503a";
-
-			reset-gpios = <&gpx3 5 1>;
-			connect-gpios = <&gpd1 7 1>;
-		};
-	};
-
-	usb@12110000 {
-		usb-phy = <&usb2_phy>;
-	};
-};
diff --git a/src/arm/exynos5250-cros-common.dtsi b/src/arm/exynos5250-cros-common.dtsi
deleted file mode 100644
index e603e9c70142..000000000000
--- a/src/arm/exynos5250-cros-common.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Common device tree include for all Exynos 5250 boards based off of Daisy.
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	aliases {
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-	};
-
-	pinctrl@11400000 {
-		/*
-		 * Disabled pullups since external part has its own pullups and
-		 * double-pulling gets us out of spec in some cases.
-		 */
-		i2c2_bus: i2c2-bus {
-			samsung,pin-pud = <0>;
-		};
-	};
-
-	i2c@12C60000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-	};
-
-	i2c@12C70000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-	};
-
-	i2c@12C80000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12C90000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CA0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CB0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CD0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CE0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-
-		hdmiphy: hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	mmc@12200000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		num-slots = <1>;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			wp-gpios = <&gpc2 1 0>;
-		};
-	};
-
-	mmc@12230000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		/* See board-specific dts files for pin setup */
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
-	};
-
-	spi_1: spi@12d30000 {
-		status = "okay";
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-	};
-
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-		phy = <&hdmiphy>;
-		ddc = <&i2c_2>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 3 1>;
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/src/arm/exynos5250-pinctrl.dtsi b/src/arm/exynos5250-pinctrl.dtsi
deleted file mode 100644
index 886cfca044ac..000000000000
--- a/src/arm/exynos5250-pinctrl.dtsi
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_hs_bus: i2c2-hs-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_hs_bus: i2c3-hs-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_hs_bus: i2c0-hs-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_hs_bus: i2c1-hs-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpc4-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpc4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpc4-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpc4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph1: gph1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpe0-6", "gpe1-0";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0", "gpg2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a: cam-port-a {
-			samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
-				       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
-				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@10d10000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_rxd: c2c-rxd {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		c2c_txd: c2c-txd {
-			samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos5250-smdk5250.dts b/src/arm/exynos5250-smdk5250.dts
deleted file mode 100644
index b4b35adae565..000000000000
--- a/src/arm/exynos5250-smdk5250.dts
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * SAMSUNG SMDK5250 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5250.dtsi"
-
-/ {
-	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
-	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	i2c@12C60000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		status = "okay";
-
-		eeprom@50 {
-			compatible = "samsung,s524ad0xd1";
-			reg = <0x50>;
-		};
-
-		max77686@09 {
-			compatible = "maxim,max77686";
-			reg = <0x09>;
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 0>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "P1.0V_LDO_OUT1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "P1.2V_LDO_OUT2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "P1.8V_LDO_OUT3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "P2.8V_LDO_OUT4";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "P1.8V_LDO_OUT5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "P1.1V_LDO_OUT6";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "P1.1V_LDO_OUT7";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "P1.0V_LDO_OUT8";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "P1.8V_LDO_OUT10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "P1.8V_LDO_OUT11";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "P3.0V_LDO_OUT12";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "P1.8V_LDO_OUT13";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "P1.8V_LDO_OUT14";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "P1.0V_LDO_OUT15";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "P1.8V_LDO_OUT16";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "P1.8V_BUCK_OUT5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	vdd: fixed-regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-supply";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	dbvdd: fixed-regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dbvdd-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	spkvdd: fixed-regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "spkvdd-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	i2c@12C70000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		status = "okay";
-
-		eeprom@51 {
-			compatible = "samsung,s524ad0xd1";
-			reg = <0x51>;
-		};
-
-		wm8994: wm8994@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			clocks = <&codec_mclk>;
-			clock-names = "MCLK1";
-
-			AVDD2-supply = <&vdd>;
-			CPVDD-supply = <&vdd>;
-			DBVDD-supply = <&dbvdd>;
-			SPKVDD1-supply = <&spkvdd>;
-			SPKVDD2-supply = <&spkvdd>;
-		};
-	};
-
-	i2c@121D0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <40000>;
-		samsung,i2c-slave-addr = <0x38>;
-		status = "okay";
-
-		sata_phy_i2c:sata-phy@38 {
-			compatible = "samsung,exynos-sataphy-i2c";
-			reg = <0x38>;
-		};
-	};
-
-	i2c@12C80000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12CE0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
-
-		hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	sata@122F0000 {
-		status = "okay";
-	};
-
-	sata-phy@12170000 {
-		status = "okay";
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
-	};
-
-	spi_1: spi@12d30000 {
-		cs-gpios = <&gpa2 5 0>;
-		status = "okay";
-
-		w25q80bw@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <1000000>;
-
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
-			};
-		};
-	};
-
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
-	sound {
-		compatible = "samsung,smdk-wm8994";
-
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&wm8994>;
-	};
-
-	usb@12110000 {
-		samsung,vbus-gpio = <&gpx2 6 0>;
-	};
-
-	dp-controller@145B0000 {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		status = "okay";
-	};
-
-	fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				/* 1280x800 */
-				clock-frequency = <50000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hfront-porch = <4>;
-				hback-porch = <4>;
-				hsync-len = <4>;
-				vback-porch = <4>;
-				vfront-porch = <4>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-
-		codec_mclk: codec-mclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <16934000>;
-		};
-	};
-};
diff --git a/src/arm/exynos5250-snow.dts b/src/arm/exynos5250-snow.dts
deleted file mode 100644
index f2b8c4116541..000000000000
--- a/src/arm/exynos5250-snow.dts
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * Google Snow board device tree source
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
-
-/ {
-	model = "Google Snow";
-	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		i2c104 = &i2c_104;
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	pinctrl@11400000 {
-		ec_irq: ec-irq {
-			samsung,pins = "gpx1-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pin-drv = <0>;
-		};
-
-		max98095_en: max98095-en {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		tps65090_irq: tps65090-irq {
-			samsung,pins = "gpx2-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		usb3_vbus_en: usb3-vbus-en {
-			samsung,pins = "gpx2-7";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		hdmi_hpd_irq: hdmi-hpd-irq {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		arb_their_claim: arb-their-claim {
-			samsung,pins = "gpe0-4";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		arb_our_claim: arb-our-claim {
-			samsung,pins = "gpf0-3";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 1>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	vbat: vbat-fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@12CA0000}>;
-
-		our-claim-gpio = <&gpf0 3 1>;
-		their-claim-gpios = <&gpe0 4 1>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
-		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-
-			cros_ec: embedded-controller {
-				compatible = "google,cros-ec-i2c";
-				reg = <0x1e>;
-				interrupts = <6 0>;
-				interrupt-parent = <&gpx1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&ec_irq>;
-				wakeup-source;
-			};
-
-			power-regulator {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					dcdc1 {
-						ti,enable-ext-control;
-					};
-					dcdc2 {
-						ti,enable-ext-control;
-					};
-					dcdc3 {
-						ti,enable-ext-control;
-					};
-					fet1 {
-						regulator-name = "vcd_led";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet4 {
-						regulator-name = "sdcard";
-						ti,overcurrent-wait = <3>;
-					};
-					fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet6 {
-						regulator-name = "lcd_vdd";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					ldo1 {
-					};
-					ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-
-	mmc@12200000 {
-		status = "okay";
-	};
-
-	mmc@12220000 {
-		status = "okay";
-	};
-
-	/*
-	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
-	 * reduce EMI.
-	 */
-	mmc@12230000 {
-		status = "okay";
-		slot@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
-		};
-	};
-
-	i2c@12CD0000 {
-		max98095: codec@11 {
-			compatible = "maxim,max98095";
-			reg = <0x11>;
-			pinctrl-0 = <&max98095_en>;
-			pinctrl-names = "default";
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98095";
-
-		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98095>;
-	};
-
-	usb3_vbus_reg: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_en>;
-		enable-active-high;
-	};
-
-	phy@12100000 {
-		vbus-supply = <&usb3_vbus_reg>;
-	};
-
-	usb@12110000 {
-		samsung,vbus-gpio = <&gpx1 1 0>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	hdmi {
-		hdmi-en-supply = <&tps65090_fet7>;
-		vdd-supply = <&ldo8_reg>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	fimd@14400000 {
-		status = "okay";
-		samsung,invert-vclk;
-	};
-
-	dp-controller@145B0000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <2>;
-		samsung,hpd-gpio = <&gpx0 7 0>;
-
-		display-timings {
-			native-mode = <&timing1>;
-
-			timing1: timing@1 {
-				clock-frequency = <70589280>;
-				hactive = <1366>;
-				vactive = <768>;
-				hfront-porch = <40>;
-				hback-porch = <40>;
-				hsync-len = <32>;
-				vback-porch = <10>;
-				vfront-porch = <12>;
-				vsync-len = <6>;
-			};
-		};
-	};
-};
-
-&i2c_0 {
-	max77686@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.8V_LDO_OUT2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.35V_BUCK_OUT6";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "P2.0V_BUCK_OUT7";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "P2.85V_BUCK_OUT8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	trackpad {
-		reg = <0x67>;
-		compatible = "cypress,cyapa";
-		interrupts = <2 0>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-	};
-};
-
-&pinctrl_0 {
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5250.dtsi b/src/arm/exynos5250.dtsi
deleted file mode 100644
index 492e1eff37bd..000000000000
--- a/src/arm/exynos5250.dtsi
+++ /dev/null
@@ -1,784 +0,0 @@
-/*
- * SAMSUNG EXYNOS5250 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
- * additional nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5250.h>
-#include "exynos5.dtsi"
-#include "exynos5250-pinctrl.dtsi"
-
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		gsc2 = &gsc_2;
-		gsc3 = &gsc_3;
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		mshc3 = &mmc_3;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		i2c8 = &i2c_8;
-		i2c9 = &i2c_9;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1700000000>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1700000000>;
-		};
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x30000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x30000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
-		};
-	};
-
-	pd_gsc: gsc-power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-	};
-
-	pd_mfc: mfc-power-domain@10044040 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044040 0x20>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5250-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
-
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5250-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		/* Unfortunately we need this since some versions of U-Boot
-		 * on Exynos don't set the CNTFRQ register, so we need the
-		 * value from DT.
-		 */
-		clock-frequency = <24000000>;
-	};
-
-	mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &combiner 23 3>,
-					<0x1 0 &combiner 23 4>,
-					<0x2 0 &combiner 25 2>,
-					<0x3 0 &combiner 25 3>,
-					<0x4 0 &gic 0 120 0>,
-					<0x5 0 &gic 0 121 0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>, <22 4>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 46 0>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	pinctrl_1: pinctrl@13400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-	};
-
-	pinctrl_2: pinctrl@10d10000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x10d10000 0x1000>;
-		interrupts = <0 50 0>;
-	};
-
-	pinctrl_3: pinctrl@03860000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5250-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-	};
-
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
-	watchdog@101D0000 {
-		compatible = "samsung,exynos5250-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
-
-	g2d@10850000 {
-		compatible = "samsung,exynos5250-g2d";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-		clocks = <&clock CLK_G2D>;
-		clock-names = "fimg2d";
-	};
-
-	codec@11000000 {
-		compatible = "samsung,mfc-v6";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-	};
-
-	rtc@101E0000 {
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
-
-	tmu@10060000 {
-		compatible = "samsung,exynos5250-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-	};
-
-	serial@12C00000 {
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C10000 {
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C20000 {
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C30000 {
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	sata@122F0000 {
-		compatible = "snps,dwc-ahci";
-		samsung,sata-freq = <66>;
-		reg = <0x122F0000 0x1ff>;
-		interrupts = <0 115 0>;
-		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-		clock-names = "sata", "sclk_sata";
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-		status = "disabled";
-	};
-
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock CLK_SATA_PHYCTRL>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
-
-	i2c_4: i2c@12CA0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
-
-	i2c_5: i2c@12CB0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
-
-	i2c_6: i2c@12CC0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
-
-	i2c_7: i2c@12CD0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
-
-	i2c_8: i2c@12CE0000 {
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x12CE0000 0x1000>;
-		interrupts = <0 64 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
-
-	i2c_9: i2c@121D0000 {
-                compatible = "samsung,exynos5-sata-phy-i2c";
-                reg = <0x121D0000 0x100>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-		clocks = <&clock CLK_SATA_PHYI2C>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-	};
-
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-	};
-
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-	};
-
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x1000>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x1000>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	mmc_3: mmc@12230000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12230000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		status = "disabled";
-		reg = <0x03830000 0x100>;
-		dmas = <&pdma0 10
-			&pdma0 9
-			&pdma0 8>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
-
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-	};
-
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-	};
-
-	usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USB3>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dwc3 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-			phy-names = "usb2-phy", "usb3-phy";
-		};
-	};
-
-	usbdrd_phy: phy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
-		};
-	};
-
-	usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
-		};
-	};
-
-	usb2_phy: usbphy@12130000 {
-		compatible = "samsung,exynos5250-usb2phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
-		clock-names = "ext_xtal", "usbhost";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbphy-sys {
-			reg = <0x10040704 0x8>,
-			      <0x10050230 0x4>;
-		};
-	};
-
-	usb2_phy_gen: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
-
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-	};
-
-	gsc_0:  gsc@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-	};
-
-	gsc_1:  gsc@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-	};
-
-	gsc_2:  gsc@13e20000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e20000 0x1000>;
-		interrupts = <0 87 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL2>;
-		clock-names = "gscl";
-	};
-
-	gsc_3:  gsc@13e30000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e30000 0x1000>;
-		interrupts = <0 88 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL3>;
-		clock-names = "gscl";
-	};
-
-	hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
-
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
-	};
-
-	dp_phy: video-phy@10040720 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040720 4>;
-		#phy-cells = <0>;
-	};
-
-	dp-controller@145B0000 {
-		clocks = <&clock CLK_DP>;
-		clock-names = "dp";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
-
-	fimd@14400000 {
-		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-		clock-names = "sclk_fimd", "fimd";
-	};
-
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_ADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		status = "disabled";
-	};
-
-	sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-};
diff --git a/src/arm/exynos5260-pinctrl.dtsi b/src/arm/exynos5260-pinctrl.dtsi
deleted file mode 100644
index f6ee55ea0708..000000000000
--- a/src/arm/exynos5260-pinctrl.dtsi
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	3
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa2: gpa2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb0: gpb0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb1: gpb1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb2: gpb2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb3: gpb3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb4: gpb4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb5: gpb5 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd2: gpd2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe0: gpe0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb3_vbus0_en: usb3-vbus0-en {
-		samsung,pins = "gpa2-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-				"gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-				"gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	spdif1_bus: spdif1-bus {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c0_hs_bus: i2c0-hs-bus {
-		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c1_hs_bus: i2c1-hs-bus {
-		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c2_hs_bus: i2c2-hs-bus {
-		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c3_hs_bus: i2c3-hs-bus {
-		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb4-2", "gpb4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpb4-4", "gpb4-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpb4-6", "gpb4-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c8_bus: i2c8-bus {
-		samsung,pins = "gpb5-0", "gpb5-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c9_bus: i2c9-bus {
-		samsung,pins = "gpb5-2", "gpb5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c10_bus: i2c10-bus {
-		samsung,pins = "gpb5-4", "gpb5-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c11_bus: i2c11-bus {
-		samsung,pins = "gpb5-6", "gpb5-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_gpio_a: cam-gpio-a {
-		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-			"gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_gpio_b: cam-gpio-b {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_i2c1_bus: cam-i2c1-bus {
-		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_i2c0_bus: cam-i2c0-bus {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_spi0_bus: cam-spi0-bus {
-		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_spi1_bus: cam-spi1-bus {
-		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc2: gpc2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc3: gpc3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc4: gpc4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_rdqs: sd0-rdqs {
-		samsung,pins = "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-};
-
-&pinctrl_2 {
-	gpz0: gpz0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpz1: gpz1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/src/arm/exynos5260-xyref5260.dts b/src/arm/exynos5260-xyref5260.dts
deleted file mode 100644
index 8c84ab27c19b..000000000000
--- a/src/arm/exynos5260-xyref5260.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * SAMSUNG XYREF5260 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5260.dtsi"
-
-/ {
-	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
-	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	xrtcxti: xrtcxti {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "xrtcxti";
-		#clock-cells = <0>;
-	};
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	bypass-smu;
-	supports-highspeed;
-	supports-hs200-mode; /* 200 Mhz */
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
diff --git a/src/arm/exynos5260.dtsi b/src/arm/exynos5260.dtsi
deleted file mode 100644
index 36da38e29000..000000000000
--- a/src/arm/exynos5260.dtsi
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * SAMSUNG EXYNOS5260 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "skeleton.dtsi"
-
-#include <dt-bindings/clock/exynos5260-clk.h>
-
-/ {
-	compatible = "samsung,exynos5260", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clock_top: clock-controller@10010000 {
-			compatible = "samsung,exynos5260-clock-top";
-			reg = <0x10010000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_peri: clock-controller@10200000 {
-			compatible = "samsung,exynos5260-clock-peri";
-			reg = <0x10200000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_egl: clock-controller@10600000 {
-			compatible = "samsung,exynos5260-clock-egl";
-			reg = <0x10600000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_kfc: clock-controller@10700000 {
-			compatible = "samsung,exynos5260-clock-kfc";
-			reg = <0x10700000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g2d: clock-controller@10A00000 {
-			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mif: clock-controller@10CE0000 {
-			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mfc: clock-controller@11090000 {
-			compatible = "samsung,exynos5260-clock-mfc";
-			reg = <0x11090000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g3d: clock-controller@11830000 {
-			compatible = "samsung,exynos5260-clock-g3d";
-			reg = <0x11830000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_fsys: clock-controller@122E0000 {
-			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_aud: clock-controller@128C0000 {
-			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_isp: clock-controller@133C0000 {
-			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_gscl: clock-controller@13F00000 {
-			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_disp: clock-controller@14550000 {
-			compatible = "samsung,exynos5260-clock-disp";
-			reg = <0x14550000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		mct: mct@100B0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
-			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-					<0 107 0>, <0 122 0>, <0 123 0>,
-					<0 124 0>, <0 125 0>, <0 126 0>,
-					<0 127 0>, <0 128 0>, <0 129 0>;
-		};
-
-		cci: cci@10F00000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11600000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x11600000 0x1000>;
-			interrupts = <0 79 0>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
-			};
-		};
-
-		pinctrl_1: pinctrl@12290000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x12290000 0x1000>;
-			interrupts = <0 157 0>;
-		};
-
-		pinctrl_2: pinctrl@128B0000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
-			interrupts = <0 243 0>;
-		};
-
-		pmu_system_controller: system-controller@10D50000 {
-			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
-		};
-
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 146 0>;
-			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 147 0>;
-			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 148 0>;
-			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart3: serial@12860000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12860000 0x100>;
-			interrupts = <0 145 0>;
-			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		mmc_0: mmc@12140000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12140000 0x2000>;
-			interrupts = <0 156 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12150000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12150000 0x2000>;
-			interrupts = <0 158 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12160000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12160000 0x2000>;
-			interrupts = <0 159 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-	};
-};
-
-#include "exynos5260-pinctrl.dtsi"
diff --git a/src/arm/exynos5410-smdk5410.dts b/src/arm/exynos5410-smdk5410.dts
deleted file mode 100644
index 7275bbd6fc4b..000000000000
--- a/src/arm/exynos5410-smdk5410.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * SAMSUNG SMDK5410 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5410.dtsi"
-/ {
-	model = "Samsung SMDK5410 board based on EXYNOS5410";
-	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	firmware@02037000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02037000 0x1000>;
-	};
-
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&uart0 {
-		status = "okay";
-};
-
-&uart1 {
-		status = "okay";
-};
-
-&uart2 {
-		status = "okay";
-};
diff --git a/src/arm/exynos5410.dtsi b/src/arm/exynos5410.dtsi
deleted file mode 100644
index 731eefd23fa9..000000000000
--- a/src/arm/exynos5410.dtsi
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * SAMSUNG EXYNOS5410 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
- * EXYNOS5410 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/exynos5410.h>
-
-/ {
-	compatible = "samsung,exynos5410", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1600000000>;
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1600000000>;
-		};
-
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1600000000>;
-		};
-
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1600000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5410-pmu", "syscon";
-			reg = <0x10040000 0x5000>;
-		};
-
-		mct: mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&interrupt_map>;
-			interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-			clocks = <&fin_pll>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			interrupt_map: interrupt-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
-		};
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5410-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12200000 0x1000>;
-			interrupts = <0 75 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12210000 0x1000>;
-			interrupts = <0 76 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12220000 0x1000>;
-			interrupts = <0 77 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/exynos5420-arndale-octa.dts b/src/arm/exynos5420-arndale-octa.dts
deleted file mode 100644
index 434fd9d3e09d..000000000000
--- a/src/arm/exynos5420-arndale-octa.dts
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * Samsung's Exynos5420 based Arndale Octa board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
-	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC3,115200";
-	};
-
-	firmware@02073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		broken-cd;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <0 4>;
-		samsung,dw-mshc-ddr-timing = <0 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		status = "okay";
-
-		s2mps11_pmic@66 {
-			compatible = "samsung,s2mps11-pmic";
-			reg = <0x66>;
-			s2mps11,buck2-ramp-delay = <12>;
-			s2mps11,buck34-ramp-delay = <12>;
-			s2mps11,buck16-ramp-delay = <12>;
-			s2mps11,buck6-ramp-enable = <1>;
-			s2mps11,buck2-ramp-enable = <1>;
-			s2mps11,buck3-ramp-enable = <1>;
-			s2mps11,buck4-ramp-enable = <1>;
-
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
-			s2mps11_osc: clocks {
-				#clock-cells = <1>;
-				clock-output-names = "s2mps11_ap",
-						"s2mps11_cp", "s2mps11_bt";
-			};
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "PVDD_ALIVE_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "PVDD_APIO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "PVDD_APIO_MMCON_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "PVDD_ADC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "PVDD_PLL_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "PVDD_ANAIP_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "PVDD_ANAIP_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "PVDD_ABB_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "PVDD_USB_3V3";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "PVDD_PRE_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "PVDD_USB_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PVDD_HSIC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "PVDD_APIO_MMCOFF_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "PVDD_PERI_2V8";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "PVDD_PERI_3V3";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "PVDD_EMMC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "PVDD_TFLASH_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "PVDD_BTWIFI_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "PVDD_CAM1IO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "PVDD_MIFS_1V1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "PVDD_CAM1_AVDD_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "PVDD_CAM0_AF_2V8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo27_reg: LDO27 {
-					regulator-name = "PVDD_G3DS_1V0";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo28_reg: LDO28 {
-					regulator-name = "PVDD_TSP_3V3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo29_reg: LDO29 {
-					regulator-name = "PVDD_AUDIO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo31_reg: LDO31 {
-					regulator-name = "PVDD_PERI_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo32_reg: LDO32 {
-					regulator-name = "PVDD_LCD_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo33_reg: LDO33 {
-					regulator-name = "PVDD_CAM0IO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo35_reg: LDO35 {
-					regulator-name = "PVDD_CAM0_DVDD_1V2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo38_reg: LDO38 {
-					regulator-name = "PVDD_CAM0_AVDD_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "PVDD_MIF_1V1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "PVDD_INT_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "PVDD_G3D_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "PVDD_LPDDR3_1V2";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "PVDD_KFC_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "VIN_LLDO_1V4";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "VIN_MLDO_2V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "VIN_HLDO_3V5";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3500000>;
-					regulator-always-on;
-				};
-
-				buck10_reg: BUCK10 {
-					regulator-name = "PVDD_EMMCF_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		wakeup {
-			label = "SW-TACT1";
-			gpios = <&gpx2 7 1>;
-			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/src/arm/exynos5420-peach-pit.dts b/src/arm/exynos5420-peach-pit.dts
deleted file mode 100644
index 228a6b1e0aa1..000000000000
--- a/src/arm/exynos5420-peach-pit.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * Google Peach Pit Rev 6+ board device tree source
- *
- * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos5420.dtsi"
-
-/ {
-	model = "Google Peach Pit Rev 6+";
-
-	compatible = "google,pit-rev16",
-		"google,pit-rev15", "google,pit-rev14",
-		"google,pit-rev13", "google,pit-rev12",
-		"google,pit-rev11", "google,pit-rev10",
-		"google,pit-rev9", "google,pit-rev8",
-		"google,pit-rev7", "google,pit-rev6",
-		"google,pit", "google,peach","samsung,exynos5420",
-		"samsung,exynos5";
-
-	aliases {
-		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98090";
-
-		samsung,model = "Peach-Pit-I2S-MAX98090";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98090>;
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	vbat: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x06>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-
-	display-timings {
-		native-mode = <&timing1>;
-
-		timing1: timing@1 {
-			clock-frequency = <70589280>;
-			hactive = <1366>;
-			vactive = <768>;
-			hfront-porch = <40>;
-			hback-porch = <40>;
-			hsync-len = <32>;
-			vback-porch = <10>;
-			vfront-porch = <12>;
-			vsync-len = <6>;
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-};
-
-&hsi2c_7 {
-	status = "okay";
-
-	max98090: codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98090_irq>;
-	};
-};
-
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
-	non-removable;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mask_tpm_reset>;
-
-	max98090_irq: max98090-irq {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
-		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-		samsung,pin-val = <0>;
-	};
-
-	tpm_irq: tpm-irq {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	dp_hpd_gpio: dp_hpd_gpio {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <2>;
-	};
-
-	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
-		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
-	};
-
-	usb300_vbus_en: usb300-vbus-en {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb301_vbus_en: usb301-vbus-en {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&spi_2 {
-	status = "okay";
-	num-cs = <1>;
-	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
-
-	cros_ec: cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_spi_cs &ec_irq>;
-		reg = <0>;
-		spi-max-frequency = <3125000>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <1>;
-		};
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-				sbs,i2c-retry-count = <2>;
-			};
-
-			power-regulator@48 {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					tps65090_dcdc1: dcdc1 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc2: dcdc2 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc3: dcdc3 {
-						ti,enable-ext-control;
-					};
-					tps65090_fet1: fet1 {
-						regulator-name = "vcd_led";
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-					};
-					tps65090_fet3: fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-					};
-					tps65090_fet4: fet4 {
-						regulator-name = "sdcard";
-						regulator-always-on;
-					};
-					tps65090_fet5: fet5 {
-						regulator-name = "camout";
-					};
-					tps65090_fet6: fet6 {
-						regulator-name = "lcd_vdd";
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-					};
-					tps65090_ldo1: ldo1 {
-					};
-					tps65090_ldo2: ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-};
-
-&uart_3 {
-	status = "okay";
-};
-
-&usbdrd_phy0 {
-	vbus-supply = <&usb300_vbus_reg>;
-};
-
-&usbdrd_phy1 {
-	vbus-supply = <&usb301_vbus_reg>;
-};
-
-/*
- * Use longest HW watchdog in SoC (32 seconds) since the hardware
- * watchdog provides no debugging information (compared to soft/hard
- * lockup detectors) and so should be last resort.
- */
-&watchdog {
-	timeout-sec = <32>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5420-pinctrl.dtsi b/src/arm/exynos5420-pinctrl.dtsi
deleted file mode 100644
index ba686e40eac7..000000000000
--- a/src/arm/exynos5420-pinctrl.dtsi
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@13400000 {
-		gpy7: gpy7 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13410000 {
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_int: sd1-int {
-			samsung,pins = "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus8: sd1-bus-width8 {
-			samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-	};
-
-	pinctrl@14000000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj4: gpj4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpf0-4", "gpf0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14010000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb4: gpb4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_hs_bus: i2c4-hs-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_hs_bus: i2c5-hs-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_hs_bus: i2c6-hs-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_hs_bus: i2c7-hs-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c8_hs_bus: i2c8-hs-bus {
-			samsung,pins = "gpb3-4", "gpb3-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c9_hs_bus: i2c9-hs-bus {
-			samsung,pins = "gpb3-6", "gpb3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c10_hs_bus: i2c10-hs-bus {
-			samsung,pins = "gpb4-0", "gpb4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos5420-smdk5420.dts b/src/arm/exynos5420-smdk5420.dts
deleted file mode 100644
index 6052aa9c5659..000000000000
--- a/src/arm/exynos5420-smdk5420.dts
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * SAMSUNG SMDK5420 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-
-/ {
-	model = "Samsung SMDK5420 board based on EXYNOS5420";
-	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200 init=/linuxrc";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-supply";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		dbvdd: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dbvdd-supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		spkvdd: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "spkvdd-supply";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		broken-cd;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <0 4>;
-		samsung,dw-mshc-ddr-timing = <0 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
-	};
-
-	dp-controller@145B0000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-		status = "okay";
-	};
-
-	fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				clock-frequency = <50000>;
-				hactive = <2560>;
-				vactive = <1600>;
-				hfront-porch = <48>;
-				hback-porch = <80>;
-				hsync-len = <32>;
-				vback-porch = <16>;
-				vfront-porch = <8>;
-				vsync-len = <6>;
-			};
-		};
-	};
-
-	pinctrl@13400000 {
-		hdmi_hpd_irq: hdmi-hpd-irq {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14000000 {
-		usb300_vbus_en: usb300-vbus-en {
-			samsung,pins = "gpg0-5";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		usb301_vbus_en: usb301-vbus-en {
-			samsung,pins = "gpg1-4";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	hdmi@14530000 {
-		status = "okay";
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg0 5 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg1 4 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	phy@12100000 {
-		vbus-supply = <&usb300_vbus_reg>;
-	};
-
-	phy@12500000 {
-		vbus-supply = <&usb301_vbus_reg>;
-	};
-
-	i2c_2: i2c@12C80000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		status = "okay";
-
-		s2mps11_pmic@66 {
-			compatible = "samsung,s2mps11-pmic";
-			reg = <0x66>;
-			s2mps11,buck2-ramp-delay = <12>;
-			s2mps11,buck34-ramp-delay = <12>;
-			s2mps11,buck16-ramp-delay = <12>;
-			s2mps11,buck6-ramp-enable = <1>;
-			s2mps11,buck2-ramp-enable = <1>;
-			s2mps11,buck3-ramp-enable = <1>;
-			s2mps11,buck4-ramp-enable = <1>;
-
-			s2mps11_osc: clocks {
-				#clock-cells = <1>;
-				clock-output-names = "s2mps11_ap",
-						"s2mps11_cp", "s2mps11_bt";
-			};
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "vdd_ldo1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "vdd_ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "vdd_ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "vdd_ldo6";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "vdd_ldo7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "vdd_ldo8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "vdd_ldo9";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "vdd_ldo10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "vdd_ldo11";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "vdd_ldo12";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "vdd_ldo13";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "vdd_ldo15";
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					regulator-always-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "vdd_ldo16";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "tsp_avdd";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "vdd_sd";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "tsp_io";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "vdd_mem";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "vdd_kfc";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "vdd_1.0v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "vdd_1.8v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "vdd_2.8v_ldo";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3750000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck10_reg: BUCK10 {
-					regulator-name = "vdd_vmem";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/exynos5420.dtsi b/src/arm/exynos5420.dtsi
deleted file mode 100644
index bfe056d9148c..000000000000
--- a/src/arm/exynos5420.dtsi
+++ /dev/null
@@ -1,901 +0,0 @@
-/*
- * SAMSUNG EXYNOS5420 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-#include "exynos5420-pinctrl.dtsi"
-
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos5420", "samsung,exynos5";
-
-	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		pinctrl4 = &pinctrl_4;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
-		i2c8 = &hsi2c_8;
-		i2c9 = &hsi2c_9;
-		i2c10 = &hsi2c_10;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	cci@10d20000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10d20000 0x1000>;
-		ranges = <0x0 0x10d20000 0x6000>;
-
-		cci_control0: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-		cci_control1: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x54000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x54000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@53000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x53000 0x1000>;
-		};
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5420-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
-
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5420-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
-
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v7";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		samsung,power-domain = <&mfc_pd>;
-	};
-
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x2000>;
-		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
-
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x2000>;
-		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
-
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5420-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
-
-	mct: mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <1>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &combiner 23 3>,
-					<1 &combiner 23 4>,
-					<2 &combiner 25 2>,
-					<3 &combiner 25 3>,
-					<4 &gic 0 120 0>,
-					<5 &gic 0 121 0>,
-					<6 &gic 0 122 0>,
-					<7 &gic 0 123 0>,
-					<8 &gic 0 128 0>,
-					<9 &gic 0 129 0>,
-					<10 &gic 0 130 0>,
-					<11 &gic 0 131 0>;
-		};
-	};
-
-	gsc_pd: power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-	};
-
-	isp_pd: power-domain@10044020 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044020 0x20>;
-	};
-
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
-			<&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "pclk0", "clk0";
-	};
-
-	msc_pd: power-domain@10044120 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044120 0x20>;
-	};
-
-	pinctrl_0: pinctrl@13400000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	pinctrl_1: pinctrl@13410000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13410000 0x1000>;
-		interrupts = <0 78 0>;
-	};
-
-	pinctrl_2: pinctrl@14000000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14000000 0x1000>;
-		interrupts = <0 46 0>;
-	};
-
-	pinctrl_3: pinctrl@14010000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14010000 0x1000>;
-		interrupts = <0 50 0>;
-	};
-
-	pinctrl_4: pinctrl@03860000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	rtc: rtc@101E0000 {
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		adma: adma@03880000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x03880000 0x1000>;
-			interrupts = <0 110 0>;
-			clocks = <&clock_audss EXYNOS_ADMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
-		};
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
-			status = "disabled";
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x03830000 0x100>;
-		dmas = <&adma 0
-			&adma 2
-			&adma 1>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-		status = "disabled";
-	};
-
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-		status = "disabled";
-	};
-
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-		status = "disabled";
-	};
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 69 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 70 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	uart_0: serial@12C00000 {
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_1: serial@12C10000 {
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_2: serial@12C20000 {
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_3: serial@12C30000 {
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
-	dp_phy: video-phy@10040728 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040728 4>;
-		#phy-cells = <0>;
-	};
-
-	dp: dp-controller@145B0000 {
-		clocks = <&clock CLK_DP1>;
-		clock-names = "dp";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
-
-	mipi_phy: video-phy@10040714 {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10040714 12>;
-		#phy-cells = <1>;
-	};
-
-	dsi@14500000 {
-		compatible = "samsung,exynos5410-mipi-dsi";
-		reg = <0x14500000 0x10000>;
-		interrupts = <0 82 0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-		clock-names = "bus_clk", "pll_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	fimd: fimd@14400000 {
-		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-		clock-names = "sclk_fimd", "fimd";
-	};
-
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		status = "disabled";
-	};
-
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x1000>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_USI0>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_5: i2c@12CB0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x1000>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_USI1>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_6: i2c@12CC0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x1000>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_USI2>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_7: i2c@12CD0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x1000>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_USI3>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_8: i2c@12E00000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x1000>;
-		interrupts = <0 87 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_USI4>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_9: i2c@12E10000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x1000>;
-		interrupts = <0 88 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_USI5>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_10: i2c@12E20000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x1000>;
-		interrupts = <0 203 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_USI6>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos5420-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-			"sclk_hdmiphy", "mout_hdmi";
-		phy = <&hdmiphy>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	hdmiphy: hdmiphy@145D0000 {
-		reg = <0x145D0000 0x20>;
-	};
-
-	mixer: mixer@14450000 {
-		compatible = "samsung,exynos5420-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
-	};
-
-	gsc_0: video-scaler@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		samsung,power-domain = <&gsc_pd>;
-	};
-
-	gsc_1: video-scaler@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		samsung,power-domain = <&gsc_pd>;
-	};
-
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5420-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-	};
-
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
-	tmu_cpu0: tmu@10060000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmu_cpu1: tmu@10064000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10064000 0x100>;
-		interrupts = <0 183 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-	};
-
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-	};
-
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-	};
-
-        watchdog: watchdog@101D0000 {
-		compatible = "samsung,exynos5420-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-        };
-
-	sss: sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-
-	usbdrd3_0: usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD300>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-			phy-names = "usb2-phy", "usb3-phy";
-		};
-	};
-
-	usbdrd_phy0: phy@12100000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usbdrd3_1: usb@12400000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD301>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12400000 0x10000>;
-			interrupts = <0 73 0>;
-			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-			phy-names = "usb2-phy", "usb3-phy";
-		};
-	};
-
-	usbdrd_phy1: phy@12500000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12500000 0x100>;
-		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usbhost2: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
-		};
-	};
-
-	usbhost1: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
-		};
-	};
-
-	usb2_phy: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
-};
diff --git a/src/arm/exynos5440-sd5v1.dts b/src/arm/exynos5440-sd5v1.dts
deleted file mode 100644
index 268609a42b2c..000000000000
--- a/src/arm/exynos5440-sd5v1.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * SAMSUNG SD5v1 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
-	compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	gmac: ethernet@00230000 {
-		fixed_phy;
-		phy_addr = <1>;
-	};
-
-	spi {
-		status = "disabled";
-	};
-
-};
diff --git a/src/arm/exynos5440-ssdk5440.dts b/src/arm/exynos5440-ssdk5440.dts
deleted file mode 100644
index ff55dac6e219..000000000000
--- a/src/arm/exynos5440-ssdk5440.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * SAMSUNG SSDK5440 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
-	compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	spi_0: spi@D0000 {
-
-		flash: w25q128@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "winbond,w25q128";
-			spi-max-frequency = <15625000>;
-			reg = <0>;
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@00000 {
-				label = "BootLoader";
-				reg = <0x60000 0x80000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "Recovery-Kernel";
-				reg = <0xe0000 0x300000>;
-				read-only;
-			};
-
-			partition@3e0000 {
-				label = "CRAM-FS";
-				reg = <0x3e0000 0x700000>;
-				read-only;
-			};
-
-			partition@ae0000 {
-				label = "User-Data";
-				reg = <0xae0000 0x520000>;
-			};
-
-		};
-
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	pcie@290000 {
-		reset-gpio = <&pin_ctrl 5 0>;
-		status = "okay";
-	};
-
-	pcie@2a0000 {
-		reset-gpio = <&pin_ctrl 22 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/exynos5440.dtsi b/src/arm/exynos5440.dtsi
deleted file mode 100644
index 8f3373cd7b87..000000000000
--- a/src/arm/exynos5440.dtsi
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * SAMSUNG EXYNOS5440 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5440.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "samsung,exynos5440", "samsung,exynos5";
-
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		spi0 = &spi_0;
-		tmuctrl0 = &tmuctrl_0;
-		tmuctrl1 = &tmuctrl_1;
-		tmuctrl2 = &tmuctrl_2;
-	};
-
-	clock: clock-controller@160000 {
-		compatible = "samsung,exynos5440-clock";
-		reg = <0x160000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@2E0000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x2E1000 0x1000>,
-			<0x2E2000 0x1000>,
-			<0x2E4000 0x2000>,
-			<0x2E6000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 52 4>,
-			     <0 53 4>,
-			     <0 54 4>,
-			     <0 55 4>;
-	};
-
-	timer {
-		compatible = "arm,cortex-a15-timer",
-			     "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		clock-frequency = <50000000>;
-	};
-
-	cpufreq@160000 {
-		compatible = "samsung,exynos5440-cpufreq";
-		reg = <0x160000 0x1000>;
-		interrupts = <0 57 0>;
-		operating-points = <
-				/* KHz	  uV */
-				1500000 1100000
-				1400000 1075000
-				1300000 1050000
-				1200000 1025000
-				1100000 1000000
-				1000000 975000
-				900000  950000
-				800000  925000
-		>;
-	};
-
-	serial_0: serial@B0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xB0000 0x1000>;
-		interrupts = <0 2 0>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial_1: serial@C0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xC0000 0x1000>;
-		interrupts = <0 3 0>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	spi_0: spi@D0000 {
-		compatible = "samsung,exynos5440-spi";
-		reg = <0xD0000 0x100>;
-		interrupts = <0 4 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
-		clock-names = "spi", "spi_busclk0";
-	};
-
-	pin_ctrl: pinctrl {
-		compatible = "samsung,exynos5440-pinctrl";
-		reg = <0xE0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
-			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#gpio-cells = <2>;
-
-		fan: fan {
-			samsung,exynos5440-pin-function = <1>;
-		};
-
-		hdd_led0: hdd_led0 {
-			samsung,exynos5440-pin-function = <2>;
-		};
-
-		hdd_led1: hdd_led1 {
-			samsung,exynos5440-pin-function = <3>;
-		};
-
-		uart1: uart1 {
-			samsung,exynos5440-pin-function = <4>;
-		};
-	};
-
-	i2c@F0000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0xF0000 0x1000>;
-		interrupts = <0 5 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	i2c@100000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0x100000 0x1000>;
-		interrupts = <0 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	watchdog@110000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x110000 0x1000>;
-		interrupts = <0 1 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "watchdog";
-	};
-
-	gmac: ethernet@00230000 {
-		compatible = "snps,dwmac-3.70a";
-		reg = <0x00230000 0x8000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 31 4>;
-		interrupt-names = "macirq";
-		phy-mode = "sgmii";
-		clocks = <&clock CLK_GMAC0>;
-		clock-names = "stmmaceth";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-	};
-
-	rtc {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x130000 0x1000>;
-		interrupts = <0 17 0>, <0 16 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "rtc";
-	};
-
-	tmuctrl_0: tmuctrl@160118 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmuctrl_1: tmuctrl@16011C {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmuctrl_2: tmuctrl@160120 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-	};
-
-	sata@210000 {
-		compatible = "snps,exynos5440-ahci";
-		reg = <0x210000 0x10000>;
-		interrupts = <0 30 0>;
-		clocks = <&clock CLK_SATA>;
-		clock-names = "sata";
-	};
-
-	ohci@220000 {
-		compatible = "samsung,exynos5440-ohci";
-		reg = <0x220000 0x1000>;
-		interrupts = <0 29 0>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	ehci@221000 {
-		compatible = "samsung,exynos5440-ehci";
-		reg = <0x221000 0x1000>;
-		interrupts = <0 29 0>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000
-			0x270000 0x1000
-			0x271000 0x40>;
-		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 53>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-
-	pcie@2a0000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x2a0000 0x1000
-			0x272000 0x1000
-			0x271040 0x40>;
-		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 56>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/exynos5800-peach-pi.dts b/src/arm/exynos5800-peach-pi.dts
deleted file mode 100644
index f3ee48bbe05f..000000000000
--- a/src/arm/exynos5800-peach-pi.dts
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * Google Peach Pi Rev 10+ board device tree source
- *
- * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos5800.dtsi"
-
-/ {
-	model = "Google Peach Pi Rev 10+";
-
-	compatible = "google,pi-rev16",
-		"google,pi-rev15", "google,pi-rev14",
-		"google,pi-rev13", "google,pi-rev12",
-		"google,pi-rev11", "google,pi-rev10",
-		"google,pi", "google,peach", "samsung,exynos5800",
-		"samsung,exynos5";
-
-	aliases {
-		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98091";
-
-		samsung,model = "Peach-Pi-I2S-MAX98091";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98091>;
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	vbat: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-
-	display-timings {
-		native-mode = <&timing1>;
-
-		timing1: timing@1 {
-			clock-frequency = <150660000>;
-			hactive = <1920>;
-			vactive = <1080>;
-			hfront-porch = <60>;
-			hback-porch = <172>;
-			hsync-len = <80>;
-			vback-porch = <25>;
-			vfront-porch = <10>;
-			vsync-len = <10>;
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-};
-
-&hsi2c_7 {
-	status = "okay";
-
-	max98091: codec@10 {
-		compatible = "maxim,max98091";
-		reg = <0x10>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98091_irq>;
-	};
-};
-
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
-	non-removable;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mask_tpm_reset>;
-
-	max98091_irq: max98091-irq {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
-		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-		samsung,pin-val = <0>;
-	};
-
-	tpm_irq: tpm-irq {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	dp_hpd_gpio: dp_hpd_gpio {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <2>;
-	};
-
-	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
-		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
-	};
-
-	usb300_vbus_en: usb300-vbus-en {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb301_vbus_en: usb301-vbus-en {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&spi_2 {
-	status = "okay";
-	num-cs = <1>;
-	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
-
-	cros_ec: cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_spi_cs &ec_irq>;
-		reg = <0>;
-		spi-max-frequency = <3125000>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <1>;
-		};
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-				sbs,i2c-retry-count = <2>;
-			};
-
-			power-regulator@48 {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					tps65090_dcdc1: dcdc1 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc2: dcdc2 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc3: dcdc3 {
-						ti,enable-ext-control;
-					};
-					tps65090_fet1: fet1 {
-						regulator-name = "vcd_led";
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-					};
-					tps65090_fet3: fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-					};
-					tps65090_fet4: fet4 {
-						regulator-name = "sdcard";
-						regulator-always-on;
-					};
-					tps65090_fet5: fet5 {
-						regulator-name = "camout";
-					};
-					tps65090_fet6: fet6 {
-						regulator-name = "lcd_vdd";
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-					};
-					tps65090_ldo1: ldo1 {
-					};
-					tps65090_ldo2: ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-};
-
-&uart_3 {
-	status = "okay";
-};
-
-&usbdrd_phy0 {
-	vbus-supply = <&usb300_vbus_reg>;
-};
-
-&usbdrd_phy1 {
-	vbus-supply = <&usb301_vbus_reg>;
-};
-
-/*
- * Use longest HW watchdog in SoC (32 seconds) since the hardware
- * watchdog provides no debugging information (compared to soft/hard
- * lockup detectors) and so should be last resort.
- */
-&watchdog {
-	timeout-sec = <32>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5800.dtsi b/src/arm/exynos5800.dtsi
deleted file mode 100644
index c0bb3563cac1..000000000000
--- a/src/arm/exynos5800.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * SAMSUNG EXYNOS5800 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "exynos5420.dtsi"
-
-/ {
-	compatible = "samsung,exynos5800", "samsung,exynos5";
-};
-
-&clock {
-	compatible = "samsung,exynos5800-clock";
-};
-
-&mfc {
-	compatible = "samsung,mfc-v8";
-};
diff --git a/src/arm/hi3620-hi4511.dts b/src/arm/hi3620-hi4511.dts
deleted file mode 100644
index fe623928f687..000000000000
--- a/src/arm/hi3620-hi4511.dts
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- *  Copyright (C) 2012-2013 Linaro Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "hi3620.dtsi"
-
-/ {
-	model = "Hisilicon Hi4511 Development Board";
-	compatible = "hisilicon,hi3620-hi4511";
-
-	chosen {
-		bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	amba {
-		dual_timer0: dual_timer@800000 {
-			status = "ok";
-		};
-
-		uart0: uart@b00000 {	/* console */
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
-			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
-		};
-
-		uart1: uart@b01000 { /* modem */
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
-			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
-		};
-
-		uart2: uart@b02000 { /* audience */
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
-			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
-		};
-
-		uart3: uart@b03000 {
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
-			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
-		};
-
-		uart4: uart@b04000 {
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
-			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
-		};
-
-		pmx0: pinmux@803000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&board_pmx_pins>;
-
-			board_pmx_pins: board_pmx_pins {
-				pinctrl-single,pins = <
-					0x008 0x0	/* GPIO -- eFUSE_DOUT */
-					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
-				>;
-			};
-			uart0_pmx_func: uart0_pmx_func {
-				pinctrl-single,pins = <
-					0x0f0 0x0
-					0x0f4 0x0	/* UART0_RX & UART0_TX */
-				>;
-			};
-			uart0_pmx_idle: uart0_pmx_idle {
-				pinctrl-single,pins = <
-					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
-					0x0f4 0x1	/* UART0_RX & UART0_TX */
-				>;
-			};
-			uart1_pmx_func: uart1_pmx_func {
-				pinctrl-single,pins = <
-					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
-					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
-				>;
-			};
-			uart1_pmx_idle: uart1_pmx_idle {
-				pinctrl-single,pins = <
-					0x0f8 0x1	/* GPIO (IOMG61) */
-					0x0fc 0x1	/* GPIO (IOMG62) */
-				>;
-			};
-			uart2_pmx_func: uart2_pmx_func {
-				pinctrl-single,pins = <
-					0x104 0x2	/* UART2_RXD (IOMG96) */
-					0x108 0x2	/* UART2_TXD (IOMG64) */
-				>;
-			};
-			uart2_pmx_idle: uart2_pmx_idle {
-				pinctrl-single,pins = <
-					0x104 0x1	/* GPIO (IOMG96) */
-					0x108 0x1	/* GPIO (IOMG64) */
-				>;
-			};
-			uart3_pmx_func: uart3_pmx_func {
-				pinctrl-single,pins = <
-					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
-					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
-				>;
-			};
-			uart3_pmx_idle: uart3_pmx_idle {
-				pinctrl-single,pins = <
-					0x160 0x1	/* GPIO (IOMG85) */
-					0x164 0x1	/* GPIO (IOMG86) */
-				>;
-			};
-			uart4_pmx_func: uart4_pmx_func {
-				pinctrl-single,pins = <
-					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
-					0x16c 0x0	/* UART4_RXD (IOMG88) */
-					0x170 0x0	/* UART4_TXD (IOMG93) */
-				>;
-			};
-			uart4_pmx_idle: uart4_pmx_idle {
-				pinctrl-single,pins = <
-					0x168 0x1	/* GPIO (IOMG87) */
-					0x16c 0x1	/* GPIO (IOMG88) */
-					0x170 0x1	/* GPIO (IOMG93) */
-				>;
-			};
-			i2c0_pmx_func: i2c0_pmx_func {
-				pinctrl-single,pins = <
-					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
-				>;
-			};
-			i2c0_pmx_idle: i2c0_pmx_idle {
-				pinctrl-single,pins = <
-					0x0b4 0x1	/* GPIO (IOMG45) */
-				>;
-			};
-			i2c1_pmx_func: i2c1_pmx_func {
-				pinctrl-single,pins = <
-					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
-				>;
-			};
-			i2c1_pmx_idle: i2c1_pmx_idle {
-				pinctrl-single,pins = <
-					0x0b8 0x1	/* GPIO (IOMG46) */
-				>;
-			};
-			i2c2_pmx_func: i2c2_pmx_func {
-				pinctrl-single,pins = <
-					0x068 0x0	/* I2C2_SCL (IOMG26) */
-					0x06c 0x0	/* I2C2_SDA (IOMG27) */
-				>;
-			};
-			i2c2_pmx_idle: i2c2_pmx_idle {
-				pinctrl-single,pins = <
-					0x068 0x1	/* GPIO (IOMG26) */
-					0x06c 0x1	/* GPIO (IOMG27) */
-				>;
-			};
-			i2c3_pmx_func: i2c3_pmx_func {
-				pinctrl-single,pins = <
-					0x050 0x2	/* I2C3_SCL (IOMG20) */
-					0x054 0x2	/* I2C3_SDA (IOMG21) */
-				>;
-			};
-			i2c3_pmx_idle: i2c3_pmx_idle {
-				pinctrl-single,pins = <
-					0x050 0x1	/* GPIO (IOMG20) */
-					0x054 0x1	/* GPIO (IOMG21) */
-				>;
-			};
-			spi0_pmx_func: spi0_pmx_func {
-				pinctrl-single,pins = <
-					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
-					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
-					0x0dc 0x0	/* SPI0_CS1 (IOMG55) */
-					0x0e0 0x0	/* SPI0_CS2 (IOMG56) */
-					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
-				>;
-			};
-			spi0_pmx_idle: spi0_pmx_idle {
-				pinctrl-single,pins = <
-					0x0d4 0x1	/* GPIO (IOMG53) */
-					0x0d8 0x1	/* GPIO (IOMG54) */
-					0x0dc 0x1	/* GPIO (IOMG55) */
-					0x0e0 0x1	/* GPIO (IOMG56) */
-					0x0e4 0x1	/* GPIO (IOMG57) */
-				>;
-			};
-			spi1_pmx_func: spi1_pmx_func {
-				pinctrl-single,pins = <
-					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
-					0x0e8 0x0	/* SPI1_DO (IOMG58) */
-					0x0ec 0x0	/* SPI1_CS (IOMG95) */
-				>;
-			};
-			spi1_pmx_idle: spi1_pmx_idle {
-				pinctrl-single,pins = <
-					0x184 0x1	/* GPIO (IOMG98) */
-					0x0e8 0x1	/* GPIO (IOMG58) */
-					0x0ec 0x1	/* GPIO (IOMG95) */
-				>;
-			};
-			kpc_pmx_func: kpc_pmx_func {
-				pinctrl-single,pins = <
-					0x12c 0x0	/* KEY_IN0 (IOMG73) */
-					0x130 0x0	/* KEY_IN1 (IOMG74) */
-					0x134 0x0	/* KEY_IN2 (IOMG75) */
-					0x10c 0x0	/* KEY_OUT0 (IOMG65) */
-					0x110 0x0	/* KEY_OUT1 (IOMG66) */
-					0x114 0x0	/* KEY_OUT2 (IOMG67) */
-				>;
-			};
-			kpc_pmx_idle: kpc_pmx_idle {
-				pinctrl-single,pins = <
-					0x12c 0x1	/* GPIO (IOMG73) */
-					0x130 0x1	/* GPIO (IOMG74) */
-					0x134 0x1	/* GPIO (IOMG75) */
-					0x10c 0x1	/* GPIO (IOMG65) */
-					0x110 0x1	/* GPIO (IOMG66) */
-					0x114 0x1	/* GPIO (IOMG67) */
-				>;
-			};
-			gpio_key_func: gpio_key_func {
-				pinctrl-single,pins = <
-					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
-					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
-				>;
-			};
-			emmc_pmx_func: emmc_pmx_func {
-				pinctrl-single,pins = <
-					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
-					0x018 0x0	/* NAND_CS3_N (IOMG6) */
-					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
-					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
-					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
-				>;
-			};
-			emmc_pmx_idle: emmc_pmx_idle {
-				pinctrl-single,pins = <
-					0x030 0x0	/* GPIO (IOMG12) */
-					0x018 0x1	/* GPIO (IOMG6) */
-					0x024 0x1	/* GPIO (IOMG8) */
-					0x028 0x1	/* GPIO (IOMG9) */
-					0x02c 0x1	/* GPIO (IOMG10) */
-				>;
-			};
-			sd_pmx_func: sd_pmx_func {
-				pinctrl-single,pins = <
-					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
-					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
-				>;
-			};
-			sd_pmx_idle: sd_pmx_idle {
-				pinctrl-single,pins = <
-					0x0bc 0x1	/* GPIO (IOMG47) */
-					0x0c0 0x1	/* GPIO (IOMG48) */
-				>;
-			};
-			nand_pmx_func: nand_pmx_func {
-				pinctrl-single,pins = <
-					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
-					0x010 0x0	/* NAND_CS1_N (IOMG4) */
-					0x014 0x0	/* NAND_CS2_N (IOMG5) */
-					0x018 0x0	/* NAND_CS3_N (IOMG6) */
-					0x01c 0x0	/* NAND_BUSY0_N (IOMG94) */
-					0x020 0x0	/* NAND_BUSY1_N (IOMG7) */
-					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
-					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
-					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
-				>;
-			};
-			nand_pmx_idle: nand_pmx_idle {
-				pinctrl-single,pins = <
-					0x00c 0x1	/* GPIO (IOMG3) */
-					0x010 0x1	/* GPIO (IOMG4) */
-					0x014 0x1	/* GPIO (IOMG5) */
-					0x018 0x1	/* GPIO (IOMG6) */
-					0x01c 0x1	/* GPIO (IOMG94) */
-					0x020 0x1	/* GPIO (IOMG7) */
-					0x024 0x1	/* GPIO (IOMG8) */
-					0x028 0x1	/* GPIO (IOMG9) */
-					0x02c 0x1	/* GPIO (IOMG10) */
-				>;
-			};
-			sdio_pmx_func: sdio_pmx_func {
-				pinctrl-single,pins = <
-					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
-				>;
-			};
-			sdio_pmx_idle: sdio_pmx_idle {
-				pinctrl-single,pins = <
-					0x0c4 0x1	/* GPIO (IOMG49) */
-				>;
-			};
-			audio_out_pmx_func: audio_out_pmx_func {
-				pinctrl-single,pins = <
-					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
-				>;
-			};
-		};
-
-		pmx1: pinmux@803800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
-					&board_np_pins &board_ps_pins &kpc_cfg_func
-					&audio_out_cfg_func>;
-			board_pu_pins: board_pu_pins {
-				pinctrl-single,pins = <
-					0x014 0		/* GPIO_158 (IOCFG2) */
-					0x018 0		/* GPIO_159 (IOCFG3) */
-					0x01c 0		/* BOOT_MODE0 (IOCFG4) */
-					0x020 0		/* BOOT_MODE1 (IOCFG5) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-			};
-			board_pd_pins: board_pd_pins {
-				pinctrl-single,pins = <
-					0x038 0		/* eFUSE_DOUT (IOCFG11) */
-					0x150 0		/* ISP_GPIO8 (IOCFG93) */
-					0x154 0		/* ISP_GPIO9 (IOCFG94) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			board_pd_ps_pins: board_pd_ps_pins {
-				pinctrl-single,pins = <
-					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
-					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			board_np_pins: board_np_pins {
-				pinctrl-single,pins = <
-					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			board_ps_pins: board_ps_pins {
-				pinctrl-single,pins = <
-					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
-					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
-				>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			uart0_cfg_func: uart0_cfg_func {
-				pinctrl-single,pins = <
-					0x208 0		/* UART0_RXD (IOCFG138) */
-					0x20c 0		/* UART0_TXD (IOCFG139) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart0_cfg_idle: uart0_cfg_idle {
-				pinctrl-single,pins = <
-					0x208 0		/* UART0_RXD (IOCFG138) */
-					0x20c 0		/* UART0_TXD (IOCFG139) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart1_cfg_func: uart1_cfg_func {
-				pinctrl-single,pins = <
-					0x210 0		/* UART1_CTS (IOCFG140) */
-					0x214 0		/* UART1_RTS (IOCFG141) */
-					0x218 0		/* UART1_RXD (IOCFG142) */
-					0x21c 0		/* UART1_TXD (IOCFG143) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart1_cfg_idle: uart1_cfg_idle {
-				pinctrl-single,pins = <
-					0x210 0		/* UART1_CTS (IOCFG140) */
-					0x214 0		/* UART1_RTS (IOCFG141) */
-					0x218 0		/* UART1_RXD (IOCFG142) */
-					0x21c 0		/* UART1_TXD (IOCFG143) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart2_cfg_func: uart2_cfg_func {
-				pinctrl-single,pins = <
-					0x220 0		/* UART2_CTS (IOCFG144) */
-					0x224 0		/* UART2_RTS (IOCFG145) */
-					0x228 0		/* UART2_RXD (IOCFG146) */
-					0x22c 0		/* UART2_TXD (IOCFG147) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart2_cfg_idle: uart2_cfg_idle {
-				pinctrl-single,pins = <
-					0x220 0		/* GPIO (IOCFG144) */
-					0x224 0		/* GPIO (IOCFG145) */
-					0x228 0		/* GPIO (IOCFG146) */
-					0x22c 0		/* GPIO (IOCFG147) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart3_cfg_func: uart3_cfg_func {
-				pinctrl-single,pins = <
-					0x294 0		/* UART3_CTS (IOCFG173) */
-					0x298 0		/* UART3_RTS (IOCFG174) */
-					0x29c 0		/* UART3_RXD (IOCFG175) */
-					0x2a0 0		/* UART3_TXD (IOCFG176) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart3_cfg_idle: uart3_cfg_idle {
-				pinctrl-single,pins = <
-					0x294 0		/* UART3_CTS (IOCFG173) */
-					0x298 0		/* UART3_RTS (IOCFG174) */
-					0x29c 0		/* UART3_RXD (IOCFG175) */
-					0x2a0 0		/* UART3_TXD (IOCFG176) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart4_cfg_func: uart4_cfg_func {
-				pinctrl-single,pins = <
-					0x2a4 0		/* UART4_CTS (IOCFG177) */
-					0x2a8 0		/* UART4_RTS (IOCFG178) */
-					0x2ac 0		/* UART4_RXD (IOCFG179) */
-					0x2b0 0		/* UART4_TXD (IOCFG180) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			i2c0_cfg_func: i2c0_cfg_func {
-				pinctrl-single,pins = <
-					0x17c 0		/* I2C0_SCL (IOCFG103) */
-					0x180 0		/* I2C0_SDA (IOCFG104) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c1_cfg_func: i2c1_cfg_func {
-				pinctrl-single,pins = <
-					0x184 0		/* I2C1_SCL (IOCFG105) */
-					0x188 0		/* I2C1_SDA (IOCFG106) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c2_cfg_func: i2c2_cfg_func {
-				pinctrl-single,pins = <
-					0x118 0		/* I2C2_SCL (IOCFG79) */
-					0x11c 0		/* I2C2_SDA (IOCFG80) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c3_cfg_func: i2c3_cfg_func {
-				pinctrl-single,pins = <
-					0x100 0		/* I2C3_SCL (IOCFG73) */
-					0x104 0		/* I2C3_SDA (IOCFG74) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi0_cfg_func1: spi0_cfg_func1 {
-				pinctrl-single,pins = <
-					0x1d4 0		/* SPI0_CLK (IOCFG125) */
-					0x1d8 0		/* SPI0_DI (IOCFG126) */
-					0x1dc 0		/* SPI0_DO (IOCFG127) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi0_cfg_func2: spi0_cfg_func2 {
-				pinctrl-single,pins = <
-					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
-					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
-					0x1e8 0		/* SPI0_CS2 (IOCFG130 */
-					0x1ec 0		/* SPI0_CS3 (IOCFG131) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi1_cfg_func1: spi1_cfg_func1 {
-				pinctrl-single,pins = <
-					0x1f0 0		/* SPI1_CLK (IOCFG132) */
-					0x1f4 0		/* SPI1_DI (IOCFG133) */
-					0x1f8 0		/* SPI1_DO (IOCFG134) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi1_cfg_func2: spi1_cfg_func2 {
-				pinctrl-single,pins = <
-					0x1fc 0		/* SPI1_CS (IOCFG135) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			kpc_cfg_func: kpc_cfg_func {
-				pinctrl-single,pins = <
-					0x250 0		/* KEY_IN0 (IOCFG156) */
-					0x254 0		/* KEY_IN1 (IOCFG157) */
-					0x258 0		/* KEY_IN2 (IOCFG158) */
-					0x230 0		/* KEY_OUT0 (IOCFG148) */
-					0x234 0		/* KEY_OUT1 (IOCFG149) */
-					0x238 0		/* KEY_OUT2 (IOCFG150) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			emmc_cfg_func: emmc_cfg_func {
-				pinctrl-single,pins = <
-					0x0ac 0		/* eMMC_CMD (IOCFG40) */
-					0x0b0 0		/* eMMC_CLK (IOCFG41) */
-					0x058 0		/* NAND_CS3_N (IOCFG19) */
-					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
-					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
-					0x08c 0		/* NAND_DATA8 (IOCFG32) */
-					0x090 0		/* NAND_DATA9 (IOCFG33) */
-					0x094 0		/* NAND_DATA10 (IOCFG34) */
-					0x098 0		/* NAND_DATA11 (IOCFG35) */
-					0x09c 0		/* NAND_DATA12 (IOCFG36) */
-					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
-					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
-					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sd_cfg_func1: sd_cfg_func1 {
-				pinctrl-single,pins = <
-					0x18c 0		/* SD_CLK (IOCFG107) */
-					0x190 0		/* SD_CMD (IOCFG108) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sd_cfg_func2: sd_cfg_func2 {
-				pinctrl-single,pins = <
-					0x194 0		/* SD_DATA0 (IOCFG109) */
-					0x198 0		/* SD_DATA1 (IOCFG110) */
-					0x19c 0		/* SD_DATA2 (IOCFG111) */
-					0x1a0 0		/* SD_DATA3 (IOCFG112) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x70 0xf0>;
-			};
-			nand_cfg_func1: nand_cfg_func1 {
-				pinctrl-single,pins = <
-					0x03c 0		/* NAND_ALE (IOCFG12) */
-					0x040 0		/* NAND_CLE (IOCFG13) */
-					0x06c 0		/* NAND_DATA0 (IOCFG24) */
-					0x070 0		/* NAND_DATA1 (IOCFG25) */
-					0x074 0		/* NAND_DATA2 (IOCFG26) */
-					0x078 0		/* NAND_DATA3 (IOCFG27) */
-					0x07c 0		/* NAND_DATA4 (IOCFG28) */
-					0x080 0		/* NAND_DATA5 (IOCFG29) */
-					0x084 0		/* NAND_DATA6 (IOCFG30) */
-					0x088 0		/* NAND_DATA7 (IOCFG31) */
-					0x08c 0		/* NAND_DATA8 (IOCFG32) */
-					0x090 0		/* NAND_DATA9 (IOCFG33) */
-					0x094 0		/* NAND_DATA10 (IOCFG34) */
-					0x098 0		/* NAND_DATA11 (IOCFG35) */
-					0x09c 0		/* NAND_DATA12 (IOCFG36) */
-					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
-					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
-					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			nand_cfg_func2: nand_cfg_func2 {
-				pinctrl-single,pins = <
-					0x044 0		/* NAND_RE_N (IOCFG14) */
-					0x048 0		/* NAND_WE_N (IOCFG15) */
-					0x04c 0		/* NAND_CS0_N (IOCFG16) */
-					0x050 0		/* NAND_CS1_N (IOCFG17) */
-					0x054 0		/* NAND_CS2_N (IOCFG18) */
-					0x058 0		/* NAND_CS3_N (IOCFG19) */
-					0x05c 0		/* NAND_BUSY0_N (IOCFG20) */
-					0x060 0		/* NAND_BUSY1_N (IOCFG21) */
-					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
-					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sdio_cfg_func: sdio_cfg_func {
-				pinctrl-single,pins = <
-					0x1a4 0		/* SDIO0_CLK (IOCG113) */
-					0x1a8 0		/* SDIO0_CMD (IOCG114) */
-					0x1ac 0		/* SDIO0_DATA0 (IOCG115) */
-					0x1b0 0		/* SDIO0_DATA1 (IOCG116) */
-					0x1b4 0		/* SDIO0_DATA2 (IOCG117) */
-					0x1b8 0		/* SDIO0_DATA3 (IOCG118) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			audio_out_cfg_func: audio_out_cfg_func {
-				pinctrl-single,pins = <
-					0x200 0		/* GPIO (IOCFG136) */
-					0x204 0		/* GPIO (IOCFG137) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		call {
-			label = "call";
-			gpios = <&gpio17 2 0>;
-			linux,code = <169>;	/* KEY_PHONE */
-		};
-	};
-};
diff --git a/src/arm/hi3620.dtsi b/src/arm/hi3620.dtsi
deleted file mode 100644
index 6cbb62e5c6a9..000000000000
--- a/src/arm/hi3620.dtsi
+++ /dev/null
@@ -1,566 +0,0 @@
-/*
- * Hisilicon Ltd. Hi3620 SoC
- *
- * Copyright (C) 2012-2013 Hisilicon Ltd.
- * Copyright (C) 2012-2013 Linaro Ltd.
- *
- * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/hi3620-clock.h>
-
-/ {
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-	};
-
-	pclk: clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-		clock-output-names = "apb_pclk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hi3620-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	amba {
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0xfc000000 0x2000000>;
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0x100000 0x100000>;
-			interrupts = <0 15 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			/* gic dist base, gic cpu base */
-			reg = <0x1000 0x1000>, <0x100 0x100>;
-		};
-
-		sysctrl: system-controller@802000 {
-			compatible = "hisilicon,sysctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x802000 0x1000>;
-			reg = <0x802000 0x1000>;
-
-			smp-offset = <0x31c>;
-			resume-offset = <0x308>;
-			reboot-offset = <0x4>;
-
-			clock: clock@0 {
-				compatible = "hisilicon,hi3620-clock";
-				reg = <0 0x10000>;
-				#clock-cells = <1>;
-			};
-		};
-
-		dual_timer0: dual_timer@800000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x800000 0x1000>;
-			/* timer00 & timer01 */
-			interrupts = <0 0 4>, <0 1 4>;
-			clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer1: dual_timer@801000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x801000 0x1000>;
-			/* timer10 & timer11 */
-			interrupts = <0 2 4>, <0 3 4>;
-			clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer2: dual_timer@a01000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa01000 0x1000>;
-			/* timer20 & timer21 */
-			interrupts = <0 4 4>, <0 5 4>;
-			clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer3: dual_timer@a02000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa02000 0x1000>;
-			/* timer30 & timer31 */
-			interrupts = <0 6 4>, <0 7 4>;
-			clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer4: dual_timer@a03000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa03000 0x1000>;
-			/* timer40 & timer41 */
-			interrupts = <0 96 4>, <0 97 4>;
-			clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		timer5: timer@600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		uart0: uart@b00000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb00000 0x1000>;
-			interrupts = <0 20 4>;
-			clocks = <&clock HI3620_UARTCLK0>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart1: uart@b01000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb01000 0x1000>;
-			interrupts = <0 21 4>;
-			clocks = <&clock HI3620_UARTCLK1>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart2: uart@b02000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb02000 0x1000>;
-			interrupts = <0 22 4>;
-			clocks = <&clock HI3620_UARTCLK2>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart3: uart@b03000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb03000 0x1000>;
-			interrupts = <0 23 4>;
-			clocks = <&clock HI3620_UARTCLK3>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart4: uart@b04000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb04000 0x1000>;
-			interrupts = <0 24 4>;
-			clocks = <&clock HI3620_UARTCLK4>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpio0: gpio@806000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x806000 0x1000>;
-			interrupts = <0 64 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
-					&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK0>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@807000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x807000 0x1000>;
-			interrupts = <0 65 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
-					&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
-					&pmx0 6 5 1 &pmx0 7 6 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK1>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio2: gpio@808000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x808000 0x1000>;
-			interrupts = <0 66 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
-					&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
-					&pmx0 6 3 1 &pmx0 7 3 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK2>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio3: gpio@809000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x809000 0x1000>;
-			interrupts = <0 67 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
-					&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
-					&pmx0 6 11 1 &pmx0 7 11 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK3>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio4: gpio@80a000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80a000 0x1000>;
-			interrupts = <0 68 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
-					&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
-					&pmx0 6 13 1 &pmx0 7 13 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK4>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio5: gpio@80b000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80b000 0x1000>;
-			interrupts = <0 69 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
-					&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
-					&pmx0 6 16 1 &pmx0 7 16 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK5>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio6: gpio@80c000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80c000 0x1000>;
-			interrupts = <0 70 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
-					&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
-					&pmx0 6 18 1 &pmx0 7 19 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK6>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio7: gpio@80d000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80d000 0x1000>;
-			interrupts = <0 71 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
-					&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
-					&pmx0 6 25 1 &pmx0 7 26 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK7>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio8: gpio@80e000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80e000 0x1000>;
-			interrupts = <0 72 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
-					&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
-					&pmx0 6 33 1 &pmx0 7 34 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK8>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio9: gpio@80f000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80f000 0x1000>;
-			interrupts = <0 73 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
-					&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
-					&pmx0 6 41 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK9>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio10: gpio@810000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x810000 0x1000>;
-			interrupts = <0 74 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
-					&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK10>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio11: gpio@811000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x811000 0x1000>;
-			interrupts = <0 75 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
-					&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
-					&pmx0 6 49 1 &pmx0 7 49 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK11>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio12: gpio@812000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x812000 0x1000>;
-			interrupts = <0 76 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
-					&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
-					&pmx0 6 51 1 &pmx0 7 52 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK12>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio13: gpio@813000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x813000 0x1000>;
-			interrupts = <0 77 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
-					&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
-					&pmx0 6 55 1 &pmx0 7 56 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK13>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio14: gpio@814000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x814000 0x1000>;
-			interrupts = <0 78 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
-					&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
-					&pmx0 6 60 1 &pmx0 7 61 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK14>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio15: gpio@815000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x815000 0x1000>;
-			interrupts = <0 79 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
-					&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
-					&pmx0 6 64 1 &pmx0 7 65 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK15>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio16: gpio@816000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x816000 0x1000>;
-			interrupts = <0 80 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
-					&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
-					&pmx0 6 72 1 &pmx0 7 73 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK16>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio17: gpio@817000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x817000 0x1000>;
-			interrupts = <0 81 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
-					&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
-					&pmx0 6 80 1 &pmx0 7 81 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK17>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio18: gpio@818000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x818000 0x1000>;
-			interrupts = <0 82 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
-					&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
-					&pmx0 6 86 1 &pmx0 7 87 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK18>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio19: gpio@819000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x819000 0x1000>;
-			interrupts = <0 83 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
-					&pmx0 3 88 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK19>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio20: gpio@81a000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x81a000 0x1000>;
-			interrupts = <0 84 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
-					&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK20>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio21: gpio@81b000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x81b000 0x1000>;
-			interrupts = <0 85 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 3 94 1 &pmx0 7 96 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK21>;
-			clock-names = "apb_pclk";
-		};
-
-		pmx0: pinmux@803000 {
-			compatible = "pinctrl-single";
-			reg = <0x803000 0x188>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#gpio-range-cells = <3>;
-			ranges;
-
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <7>;
-			/* pin base, nr pins & gpio function */
-			pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
-						&range 12 1 0 &range 13 29 1
-						&range 43 1 0 &range 44 49 1
-						&range 94 1 1 &range 96 2 1>;
-
-			range: gpio-range {
-				#pinctrl-single,gpio-range-cells = <3>;
-			};
-		};
-
-		pmx1: pinmux@803800 {
-			compatible = "pinconf-single";
-			reg = <0x803800 0x2dc>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pinctrl-single,register-width = <32>;
-		};
-	};
-};
diff --git a/src/arm/highbank.dts b/src/arm/highbank.dts
deleted file mode 100644
index ed14aeac0566..000000000000
--- a/src/arm/highbank.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda Highbank";
-	compatible = "calxeda,highbank";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clock-ranges;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@900 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x900>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-			operating-points = <
-				/* kHz    ignored */
-				 1300000  1000000
-				 1200000  1000000
-				 1100000  1000000
-				  800000  1000000
-				  400000  1000000
-				  200000  1000000
-			>;
-			clock-latency = <100000>;
-		};
-
-		cpu@901 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x901>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@902 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x902>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@903 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x903>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0xff900000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0xffffffff>;
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,hb-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		timer@fff10600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xfff10600 0x20>;
-			interrupts = <1 13 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		watchdog@fff10620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0xfff10620 0x20>;
-			interrupts = <1 14 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff10100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xfff12000 0x1000>;
-			interrupts = <0 70 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
-		};
-
-
-		sregs@fff3c200 {
-			compatible = "calxeda,hb-sregs-l2-ecc";
-			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
-		};
-
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/src/arm/hisi-x5hd2-dkb.dts b/src/arm/hisi-x5hd2-dkb.dts
deleted file mode 100644
index 05b44c272c9a..000000000000
--- a/src/arm/hisi-x5hd2-dkb.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "hisi-x5hd2.dtsi"
-
-/ {
-	model = "Hisilicon HIX5HD2 Development Board";
-	compatible = "hisilicon,hix5hd2";
-
-	chosen {
-		bootargs = "console=ttyAMA0,115200 earlyprintk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hix5hd2-smp";
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&l2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>;
-	};
-};
-
-&timer0 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/hisi-x5hd2.dtsi b/src/arm/hisi-x5hd2.dtsi
deleted file mode 100644
index f85ba2924ff7..000000000000
--- a/src/arm/hisi-x5hd2.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/hix5hd2-clock.h>
-
-/ {
-	aliases {
-		serial0 = &uart0;
-	};
-
-	gic: interrupt-controller@f8a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		/* gic dist base, gic cpu base */
-		reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0xf8000000 0x8000000>;
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "arm,amba-bus";
-			ranges;
-
-			timer0: timer@00002000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00002000 0x1000>;
-				/* timer00 & timer01 */
-				interrupts = <0 24 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer1: timer@00a29000 {
-				/*
-				 * Only used in NORMAL state, not available ins
-				 * SLOW or DOZE state.
-				 * The rate is fixed in 24MHz.
-				 */
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a29000 0x1000>;
-				/* timer10 & timer11 */
-				interrupts = <0 25 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer2: timer@00a2a000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a2a000 0x1000>;
-				/* timer20 & timer21 */
-				interrupts = <0 26 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer3: timer@00a2b000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a2b000 0x1000>;
-				/* timer30 & timer31 */
-				interrupts = <0 27 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer4: timer@00a81000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a81000 0x1000>;
-				/* timer30 & timer31 */
-				interrupts = <0 28 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			uart0: uart@00b00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b00000 0x1000>;
-				interrupts = <0 49 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart1: uart@00006000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00006000 0x1000>;
-				interrupts = <0 50 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart2: uart@00b02000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b02000 0x1000>;
-				interrupts = <0 51 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart3: uart@00b03000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b03000 0x1000>;
-				interrupts = <0 52 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart4: uart@00b04000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb04000 0x1000>;
-				interrupts = <0 53 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-		};
-
-		local_timer@00a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		l2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a10000 0x100000>;
-			interrupts = <0 15 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		sysctrl: system-controller@00000000 {
-			compatible = "hisilicon,sysctrl";
-			reg = <0x00000000 0x1000>;
-			reboot-offset = <0x4>;
-		};
-
-		cpuctrl@00a22000 {
-			compatible = "hisilicon,cpuctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00a22000 0x2000>;
-			ranges = <0 0x00a22000 0x2000>;
-
-			clock: clock@0 {
-				compatible = "hisilicon,hix5hd2-clock";
-				reg = <0 0x2000>;
-				#clock-cells = <1>;
-			};
-		};
-	};
-};
diff --git a/src/arm/imx23-evk.dts b/src/arm/imx23-evk.dts
deleted file mode 100644
index a33f66c11b73..000000000000
--- a/src/arm/imx23-evk.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale i.MX23 Evaluation Kit";
-	compatible = "fsl,imx23-evk", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_RESET__GPIO_1_18
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9200000>;
-							hactive = <480>;
-							vactive = <272>;
-							hback-porch = <15>;
-							hfront-porch = <8>;
-							vback-porch = <12>;
-							vfront-porch = <4>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 18 0>;
-			enable-active-high;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx23-olinuxino.dts b/src/arm/imx23-olinuxino.dts
deleted file mode 100644
index 7e6eef2488e8..000000000000
--- a/src/arm/imx23-olinuxino.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "i.MX23 Olinuxino Low Cost Board";
-	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				broken-cd;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_ALE__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio2_1: led_gpio2_1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__GPIO_2_1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ssp1: ssp@80034000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
-			gpio = <&gpio0 17 0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio2_1>;
-
-		user {
-			label = "green";
-			gpios = <&gpio2 1 1>;
-		};
-	};
-};
diff --git a/src/arm/imx23-pinfunc.h b/src/arm/imx23-pinfunc.h
deleted file mode 100644
index 5c0f32ca3a93..000000000000
--- a/src/arm/imx23-pinfunc.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * Header providing constants for i.MX23 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
-#define __DT_BINDINGS_MX23_PINCTRL_H__
-
-#include "mxs-pinfunc.h"
-
-#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
-#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
-#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
-#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
-#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
-#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
-#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
-#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
-#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
-#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
-#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
-#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
-#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
-#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
-#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
-#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
-#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
-#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
-#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
-#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
-#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
-#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
-#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
-#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
-#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
-#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
-#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
-#define MX23_PAD_LCD_D00__LCD_D00			0x1000
-#define MX23_PAD_LCD_D01__LCD_D01			0x1010
-#define MX23_PAD_LCD_D02__LCD_D02			0x1020
-#define MX23_PAD_LCD_D03__LCD_D03			0x1030
-#define MX23_PAD_LCD_D04__LCD_D04			0x1040
-#define MX23_PAD_LCD_D05__LCD_D05			0x1050
-#define MX23_PAD_LCD_D06__LCD_D06			0x1060
-#define MX23_PAD_LCD_D07__LCD_D07			0x1070
-#define MX23_PAD_LCD_D08__LCD_D08			0x1080
-#define MX23_PAD_LCD_D09__LCD_D09			0x1090
-#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
-#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
-#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
-#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
-#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
-#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
-#define MX23_PAD_LCD_D16__LCD_D16			0x1100
-#define MX23_PAD_LCD_D17__LCD_D17			0x1110
-#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
-#define MX23_PAD_LCD_RS__LCD_RS				0x1130
-#define MX23_PAD_LCD_WR__LCD_WR				0x1140
-#define MX23_PAD_LCD_CS__LCD_CS				0x1150
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
-#define MX23_PAD_PWM0__PWM0				0x11a0
-#define MX23_PAD_PWM1__PWM1				0x11b0
-#define MX23_PAD_PWM2__PWM2				0x11c0
-#define MX23_PAD_PWM3__PWM3				0x11d0
-#define MX23_PAD_PWM4__PWM4				0x11e0
-#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
-#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
-#define MX23_PAD_ROTARYA__ROTARYA			0x2070
-#define MX23_PAD_ROTARYB__ROTARYB			0x2080
-#define MX23_PAD_EMI_A00__EMI_A00			0x2090
-#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
-#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
-#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
-#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
-#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
-#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
-#define MX23_PAD_EMI_A07__EMI_A07			0x2100
-#define MX23_PAD_EMI_A08__EMI_A08			0x2110
-#define MX23_PAD_EMI_A09__EMI_A09			0x2120
-#define MX23_PAD_EMI_A10__EMI_A10			0x2130
-#define MX23_PAD_EMI_A11__EMI_A11			0x2140
-#define MX23_PAD_EMI_A12__EMI_A12			0x2150
-#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
-#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
-#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
-#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
-#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
-#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
-#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
-#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
-#define MX23_PAD_EMI_D00__EMI_D00			0x3000
-#define MX23_PAD_EMI_D01__EMI_D01			0x3010
-#define MX23_PAD_EMI_D02__EMI_D02			0x3020
-#define MX23_PAD_EMI_D03__EMI_D03			0x3030
-#define MX23_PAD_EMI_D04__EMI_D04			0x3040
-#define MX23_PAD_EMI_D05__EMI_D05			0x3050
-#define MX23_PAD_EMI_D06__EMI_D06			0x3060
-#define MX23_PAD_EMI_D07__EMI_D07			0x3070
-#define MX23_PAD_EMI_D08__EMI_D08			0x3080
-#define MX23_PAD_EMI_D09__EMI_D09			0x3090
-#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
-#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
-#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
-#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
-#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
-#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
-#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
-#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
-#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
-#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
-#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
-#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
-#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
-#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
-#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
-#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
-#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
-#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
-#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
-#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
-#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
-#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
-#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
-#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
-#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
-#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
-#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
-#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
-#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
-#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
-#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
-#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
-#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
-#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
-#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
-#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
-#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
-#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
-#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
-#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
-#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
-#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
-#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
-#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
-#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
-#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
-#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
-#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
-#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
-#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
-#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
-#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
-#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
-#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
-#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
-#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
-#define MX23_PAD_PWM0__ROTARYA				0x11a1
-#define MX23_PAD_PWM1__ROTARYB				0x11b1
-#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
-#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
-#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
-#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
-#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
-#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
-#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
-#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
-#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
-#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
-#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
-#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
-#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
-#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
-#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
-#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
-#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
-#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
-#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
-#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
-#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
-#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
-#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
-#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
-#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
-#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
-#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
-#define MX23_PAD_PWM0__DUART_RX				0x11a2
-#define MX23_PAD_PWM1__DUART_TX				0x11b2
-#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
-#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
-#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
-#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
-#define MX23_PAD_ROTARYA__SPDIF				0x2072
-#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
-#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
-#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
-#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
-#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
-#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
-#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
-#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
-#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
-#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
-#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
-#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
-#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
-#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
-#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
-#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
-#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
-#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
-#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
-#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
-#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
-#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
-#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
-#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
-#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
-#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
-#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
-#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
-#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
-#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
-#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
-#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
-#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
-#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
-#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
-#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
-#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
-#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
-#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
-#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
-#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
-#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
-#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
-#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
-#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
-#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
-#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
-#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
-#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
-#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
-#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
-#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
-#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
-#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
-#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
-#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
-#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
-#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
-#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
-#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
-#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
-#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
-#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
-#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
-#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
-#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
-#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
-#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
-#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
-#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
-#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
-#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
-#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
-#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
-#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
-#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
-#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
-#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
-#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
-#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
-
-#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/src/arm/imx23-stmp378x_devb.dts b/src/arm/imx23-stmp378x_devb.dts
deleted file mode 100644
index 455169e99d49..000000000000
--- a/src/arm/imx23-stmp378x_devb.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale STMP378x Development Board";
-	compatible = "fsl,stmp378x-devb", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-	};
-};
diff --git a/src/arm/imx23.dtsi b/src/arm/imx23.dtsi
deleted file mode 100644
index bbcfb5a19c77..000000000000
--- a/src/arm/imx23.dtsi
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx23-pinfunc.h"
-
-/ {
-	interrupt-parent = <&icoll>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		serial0 = &auart0;
-		serial1 = &auart1;
-		spi0 = &ssp0;
-		spi1 = &ssp1;
-		usbphy0 = &usbphy0;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	apb@80000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80000000 0x80000>;
-		ranges;
-
-		apbh@80000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x40000>;
-			ranges;
-
-			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx23-icoll", "fsl,icoll";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x80000000 0x2000>;
-			};
-
-			dma_apbh: dma-apbh@80004000 {
-				compatible = "fsl,imx23-dma-apbh";
-				reg = <0x80004000 0x2000>;
-				interrupts = <0 14 20 0
-					      13 13 13 13>;
-				interrupt-names = "empty", "ssp0", "ssp1", "empty",
-						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
-				#dma-cells = <1>;
-				dma-channels = <8>;
-				clocks = <&clks 15>;
-			};
-
-			ecc@80008000 {
-				reg = <0x80008000 0x2000>;
-				status = "disabled";
-			};
-
-			gpmi-nand@8000c000 {
-				compatible = "fsl,imx23-gpmi-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
-				reg-names = "gpmi-nand", "bch";
-				interrupts = <56>;
-				interrupt-names = "bch";
-				clocks = <&clks 34>;
-				clock-names = "gpmi_io";
-				dmas = <&dma_apbh 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp0: ssp@80010000 {
-				reg = <0x80010000 0x2000>;
-				interrupts = <15>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 1>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			etm@80014000 {
-				reg = <0x80014000 0x2000>;
-				status = "disabled";
-			};
-
-			pinctrl@80018000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-pinctrl", "simple-bus";
-				reg = <0x80018000 0x2000>;
-
-				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					interrupts = <16>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					interrupts = <17>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					interrupts = <18>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				duart_pins_a: duart@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM0__DUART_RX
-						MX23_PAD_PWM1__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_pins_a: auart0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_AUART1_RX__AUART1_RX
-						MX23_PAD_AUART1_TX__AUART1_TX
-						MX23_PAD_AUART1_CTS__AUART1_CTS
-						MX23_PAD_AUART1_RTS__AUART1_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_2pins_a: auart0-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_I2C_SCL__AUART1_TX
-						MX23_PAD_I2C_SDA__AUART1_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_a: gpmi-nand@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__GPMI_D00
-						MX23_PAD_GPMI_D01__GPMI_D01
-						MX23_PAD_GPMI_D02__GPMI_D02
-						MX23_PAD_GPMI_D03__GPMI_D03
-						MX23_PAD_GPMI_D04__GPMI_D04
-						MX23_PAD_GPMI_D05__GPMI_D05
-						MX23_PAD_GPMI_D06__GPMI_D06
-						MX23_PAD_GPMI_D07__GPMI_D07
-						MX23_PAD_GPMI_CLE__GPMI_CLE
-						MX23_PAD_GPMI_ALE__GPMI_ALE
-						MX23_PAD_GPMI_RDY0__GPMI_RDY0
-						MX23_PAD_GPMI_RDY1__GPMI_RDY1
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-						MX23_PAD_GPMI_CE1N__GPMI_CE1N
-						MX23_PAD_GPMI_CE0N__GPMI_CE0N
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_fixup: gpmi-pins-fixup {
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-				};
-
-				mmc0_4bit_pins_a: mmc0-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_8bit_pins_a: mmc0-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_GPMI_D08__SSP1_DATA4
-						MX23_PAD_GPMI_D09__SSP1_DATA5
-						MX23_PAD_GPMI_D10__SSP1_DATA6
-						MX23_PAD_GPMI_D11__SSP1_DATA7
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_pins_fixup: mmc0-pins-fixup {
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm2_pins_a: pwm2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM2__PWM2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_24bit_pins_a: lcdif-24bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_D00__LCD_D00
-						MX23_PAD_LCD_D01__LCD_D01
-						MX23_PAD_LCD_D02__LCD_D02
-						MX23_PAD_LCD_D03__LCD_D03
-						MX23_PAD_LCD_D04__LCD_D04
-						MX23_PAD_LCD_D05__LCD_D05
-						MX23_PAD_LCD_D06__LCD_D06
-						MX23_PAD_LCD_D07__LCD_D07
-						MX23_PAD_LCD_D08__LCD_D08
-						MX23_PAD_LCD_D09__LCD_D09
-						MX23_PAD_LCD_D10__LCD_D10
-						MX23_PAD_LCD_D11__LCD_D11
-						MX23_PAD_LCD_D12__LCD_D12
-						MX23_PAD_LCD_D13__LCD_D13
-						MX23_PAD_LCD_D14__LCD_D14
-						MX23_PAD_LCD_D15__LCD_D15
-						MX23_PAD_LCD_D16__LCD_D16
-						MX23_PAD_LCD_D17__LCD_D17
-						MX23_PAD_GPMI_D08__LCD_D18
-						MX23_PAD_GPMI_D09__LCD_D19
-						MX23_PAD_GPMI_D10__LCD_D20
-						MX23_PAD_GPMI_D11__LCD_D21
-						MX23_PAD_GPMI_D12__LCD_D22
-						MX23_PAD_GPMI_D13__LCD_D23
-						MX23_PAD_LCD_DOTCK__LCD_DOTCK
-						MX23_PAD_LCD_ENABLE__LCD_ENABLE
-						MX23_PAD_LCD_HSYNC__LCD_HSYNC
-						MX23_PAD_LCD_VSYNC__LCD_VSYNC
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi2_pins_a: spi2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			digctl@8001c000 {
-				compatible = "fsl,imx23-digctl";
-				reg = <0x8001c000 2000>;
-				status = "disabled";
-			};
-
-			emi@80020000 {
-				reg = <0x80020000 0x2000>;
-				status = "disabled";
-			};
-
-			dma_apbx: dma-apbx@80024000 {
-				compatible = "fsl,imx23-dma-apbx";
-				reg = <0x80024000 0x2000>;
-				interrupts = <7 5 9 26
-					      19 0 25 23
-					      60 58 9 0
-					      0 0 0 0>;
-				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
-						  "saif0", "empty", "auart0-rx", "auart0-tx",
-						  "auart1-rx", "auart1-tx", "saif1", "empty",
-						  "empty", "empty", "empty", "empty";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 16>;
-			};
-
-			dcp@80028000 {
-				compatible = "fsl,imx23-dcp";
-				reg = <0x80028000 0x2000>;
-				interrupts = <53 54>;
-				status = "okay";
-			};
-
-			pxp@8002a000 {
-				reg = <0x8002a000 0x2000>;
-				status = "disabled";
-			};
-
-			ocotp@8002c000 {
-				compatible = "fsl,ocotp";
-				reg = <0x8002c000 0x2000>;
-				status = "disabled";
-			};
-
-			axi-ahb@8002e000 {
-				reg = <0x8002e000 0x2000>;
-				status = "disabled";
-			};
-
-			lcdif@80030000 {
-				compatible = "fsl,imx23-lcdif";
-				reg = <0x80030000 2000>;
-				interrupts = <46 45>;
-				clocks = <&clks 38>;
-				status = "disabled";
-			};
-
-			ssp1: ssp@80034000 {
-				reg = <0x80034000 0x2000>;
-				interrupts = <2>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 2>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			tvenc@80038000 {
-				reg = <0x80038000 0x2000>;
-				status = "disabled";
-			};
-                };
-
-		apbx@80040000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80040000 0x40000>;
-			ranges;
-
-			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
-				reg = <0x80040000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			saif0: saif@80042000 {
-				reg = <0x80042000 0x2000>;
-				dmas = <&dma_apbx 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			power@80044000 {
-				reg = <0x80044000 0x2000>;
-				status = "disabled";
-			};
-
-			saif1: saif@80046000 {
-				reg = <0x80046000 0x2000>;
-				dmas = <&dma_apbx 10>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			audio-out@80048000 {
-				reg = <0x80048000 0x2000>;
-				dmas = <&dma_apbx 1>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			audio-in@8004c000 {
-				reg = <0x8004c000 0x2000>;
-				dmas = <&dma_apbx 0>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			lradc: lradc@80050000 {
-				compatible = "fsl,imx23-lradc";
-				reg = <0x80050000 0x2000>;
-				interrupts = <36 37 38 39 40 41 42 43 44>;
-				status = "disabled";
-				clocks = <&clks 26>;
-			};
-
-			spdif@80054000 {
-				reg = <0x80054000 2000>;
-				dmas = <&dma_apbx 2>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			i2c@80058000 {
-				reg = <0x80058000 0x2000>;
-				dmas = <&dma_apbx 3>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			rtc@8005c000 {
-				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x8005c000 0x2000>;
-				interrupts = <22>;
-			};
-
-			pwm: pwm@80064000 {
-				compatible = "fsl,imx23-pwm";
-				reg = <0x80064000 0x2000>;
-				clocks = <&clks 30>;
-				#pwm-cells = <2>;
-				fsl,pwm-number = <5>;
-				status = "disabled";
-			};
-
-			timrot@80068000 {
-				compatible = "fsl,imx23-timrot", "fsl,timrot";
-				reg = <0x80068000 0x2000>;
-				interrupts = <28 29 30 31>;
-				clocks = <&clks 28>;
-			};
-
-			auart0: serial@8006c000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006c000 0x2000>;
-				interrupts = <24>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			auart1: serial@8006e000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006e000 0x2000>;
-				interrupts = <59>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			duart: serial@80070000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x80070000 0x2000>;
-				interrupts = <0>;
-				clocks = <&clks 32>, <&clks 16>;
-				clock-names = "uart", "apb_pclk";
-				status = "disabled";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				compatible = "fsl,imx23-usbphy";
-				reg = <0x8007c000 0x2000>;
-				clocks = <&clks 41>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80080000 0x80000>;
-		ranges;
-
-		usb0: usb@80080000 {
-			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
-			reg = <0x80080000 0x40000>;
-			interrupts = <11>;
-			fsl,usbphy = <&usbphy0>;
-			clocks = <&clks 40>;
-			status = "disabled";
-		};
-	};
-
-	iio_hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&lradc 8>;
-	};
-};
diff --git a/src/arm/imx25-eukrea-cpuimx25.dtsi b/src/arm/imx25-eukrea-cpuimx25.dtsi
deleted file mode 100644
index d6f27641c0ef..000000000000
--- a/src/arm/imx25-eukrea-cpuimx25.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX25";
-	compatible = "eukrea,cpuimx25", "fsl,imx25";
-
-	memory {
-		reg = <0x80000000 0x4000000>; /* 64M */
-	};
-};
-
-&fec {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-cpuimx25 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
-				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
-				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
-				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
-				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
-				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
-				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
deleted file mode 100644
index 68d0834a2d1e..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	cmo_qvga: display {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xcad08b80>;
-		bus-width = <18>;
-		native-mode = <&qvga_timings>;
-		display-timings {
-			qvga_timings: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <30>;
-				hfront-porch = <38>;
-				vback-porch = <20>;
-				vfront-porch = <3>;
-				hsync-len = <15>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_lcd_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&cmo_qvga>;
-	fsl,lpccr = <0x00a903ff>;
-	lcd-supply = <&reg_lcd_3v3>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
deleted file mode 100644
index 8eee2f65fe00..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_svga: display {
-		model = "DVI-SVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		native-mode = <&dvi_svga_timings>;
-		display-timings {
-			dvi_svga_timings: 800x600 {
-				clock-frequency = <40000000>;
-				hactive = <800>;
-				vactive = <600>;
-				hback-porch = <75>;
-				hfront-porch = <75>;
-				vback-porch = <7>;
-				vfront-porch = <75>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_svga>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
deleted file mode 100644
index 447da6263169..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_vga: display {
-		model = "DVI-VGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		native-mode = <&dvi_vga_timings>;
-		display-timings {
-			dvi_vga_timings: 640x480 {
-				clock-frequency = <31250000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <100>;
-				hfront-porch = <100>;
-				vback-porch = <7>;
-				vfront-porch = <100>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_vga>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
deleted file mode 100644
index ed1d0b4578ef..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx25-eukrea-cpuimx25.dtsi"
-
-/ {
-	model = "Eukrea MBIMXSD25";
-	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx25-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 20>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
-				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
-				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
-				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x400000c0
-				MX25_PAD_SD1_CLK__SD1_CLK		0x400000c0
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x400000c0
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x400000c0
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x400000c0
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x400000c0
-			>;
-		};
-
-		pinctrl_gpiokeys: gpiokeysgrp {
-			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
-		};
-
-		pinctrl_gpioled: gpioledgrp {
-			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
-		};
-
-		pinctrl_lcdc: lcdcgrp {
-			fsl,pins = <
-				MX25_PAD_LD0__LD0			0x1
-				MX25_PAD_LD1__LD1			0x1
-				MX25_PAD_LD2__LD2			0x1
-				MX25_PAD_LD3__LD3			0x1
-				MX25_PAD_LD4__LD4			0x1
-				MX25_PAD_LD5__LD5			0x1
-				MX25_PAD_LD6__LD6			0x1
-				MX25_PAD_LD7__LD7			0x1
-				MX25_PAD_LD8__LD8			0x1
-				MX25_PAD_LD9__LD9			0x1
-				MX25_PAD_LD10__LD10			0x1
-				MX25_PAD_LD11__LD11			0x1
-				MX25_PAD_LD12__LD12			0x1
-				MX25_PAD_LD13__LD13			0x1
-				MX25_PAD_LD14__LD14			0x1
-				MX25_PAD_LD15__LD15			0x1
-				MX25_PAD_GPIO_E__LD16			0x1
-				MX25_PAD_GPIO_F__LD17			0x1
-				MX25_PAD_HSYNC__HSYNC			0x80000000
-				MX25_PAD_VSYNC__VSYNC			0x80000000
-				MX25_PAD_LSCLK__LSCLK			0x80000000
-				MX25_PAD_OE_ACD__OE_ACD			0x80000000
-				MX25_PAD_CONTRAST__CONTRAST		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
-				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
-				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
-				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
-				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
-				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
-				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/src/arm/imx25-karo-tx25.dts b/src/arm/imx25-karo-tx25.dts
deleted file mode 100644
index 9b31faa96377..000000000000
--- a/src/arm/imx25-karo-tx25.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx25.dtsi"
-
-/ {
-	model = "Ka-Ro TX25";
-	compatible = "karo,imx25-tx25", "fsl,imx25";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_phy: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-phy";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 9 0>;
-			enable-active-high;
-		};
-	};
-
-	memory {
-		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
-			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
-			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
-			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
-			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
-			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
-			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
-			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
-			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
-			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
-			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
-			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
-			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
-			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			MX25_PAD_NF_CE0__NF_CE0		0x80000000
-			MX25_PAD_NFWE_B__NFWE_B		0x80000000
-			MX25_PAD_NFRE_B__NFRE_B		0x80000000
-			MX25_PAD_NFALE__NFALE		0x80000000
-			MX25_PAD_NFCLE__NFCLE		0x80000000
-			MX25_PAD_NFWP_B__NFWP_B		0x80000000
-			MX25_PAD_NFRB__NFRB		0x80000000
-			MX25_PAD_D7__D7			0x80000000
-			MX25_PAD_D6__D6			0x80000000
-			MX25_PAD_D5__D5			0x80000000
-			MX25_PAD_D4__D4			0x80000000
-			MX25_PAD_D3__D3			0x80000000
-			MX25_PAD_D2__D2			0x80000000
-			MX25_PAD_D1__D1			0x80000000
-			MX25_PAD_D0__D0			0x80000000
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 0>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_fec_phy>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-bus-width = <8>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-pdk.dts b/src/arm/imx25-pdk.dts
deleted file mode 100644
index 9c21b1583762..000000000000
--- a/src/arm/imx25-pdk.dts
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx25.dtsi"
-
-/ {
-	model = "Freescale i.MX25 Product Development Kit";
-	compatible = "fsl,imx25-pdk", "fsl,imx25";
-
-	memory {
-		reg = <0x80000000 0x4000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 3 0>;
-			enable-active-high;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_can_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 6 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx25-pdk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx25-pdk-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_3v3>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
-	wp-gpios = <&gpio2 0 0>;
-	status = "okay";
-};
-
-&fec {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-supply = <&reg_fec_3v3>;
-	phy-reset-gpios = <&gpio4 8 0>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 129>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	imx25-pdk {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX25_PAD_RW__AUD4_TXFS			0xe0
-				MX25_PAD_OE__AUD4_TXC			0xe0
-				MX25_PAD_EB0__AUD4_TXD			0xe0
-				MX25_PAD_EB1__AUD4_RXD			0xe0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX25_PAD_GPIO_A__CAN1_TX		0x0
-				MX25_PAD_GPIO_B__CAN1_RX		0x0
-				MX25_PAD_D14__GPIO_4_6 			0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
-				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
-				MX25_PAD_A14__GPIO_2_0			0x80000000
-				MX25_PAD_A15__GPIO_2_1			0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
-				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
-				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
-				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
-				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
-				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
-				MX25_PAD_A17__GPIO_2_3			0x80000000
-				MX25_PAD_D12__GPIO_4_8			0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
-				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX25_PAD_KPP_ROW0__KPP_ROW0	0x80000000
-				MX25_PAD_KPP_ROW1__KPP_ROW1	0x80000000
-				MX25_PAD_KPP_ROW2__KPP_ROW2	0x80000000
-				MX25_PAD_KPP_ROW3__KPP_ROW3	0x80000000
-				MX25_PAD_KPP_COL0__KPP_COL0	0x80000000
-				MX25_PAD_KPP_COL1__KPP_COL1	0x80000000
-				MX25_PAD_KPP_COL2__KPP_COL2	0x80000000
-				MX25_PAD_KPP_COL3__KPP_COL3	0x80000000
-			>;
-		};
-
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
-				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
-				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
-				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-			MATRIX_KEY(0x0, 0x0, KEY_UP)
-			MATRIX_KEY(0x0, 0x1, KEY_DOWN)
-			MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0x0, 0x3, KEY_HOME)
-			MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
-			MATRIX_KEY(0x1, 0x1, KEY_LEFT)
-			MATRIX_KEY(0x1, 0x2, KEY_ENTER)
-			MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
-			MATRIX_KEY(0x2, 0x0, KEY_F6)
-			MATRIX_KEY(0x2, 0x1, KEY_F8)
-			MATRIX_KEY(0x2, 0x2, KEY_F9)
-			MATRIX_KEY(0x2, 0x3, KEY_F10)
-			MATRIX_KEY(0x3, 0x0, KEY_F1)
-			MATRIX_KEY(0x3, 0x1, KEY_F2)
-			MATRIX_KEY(0x3, 0x2, KEY_F3)
-			MATRIX_KEY(0x3, 0x2, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&ssi1 {
-	codec-handle = <&codec>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/src/arm/imx25-pinfunc.h b/src/arm/imx25-pinfunc.h
deleted file mode 100644
index 9238a95d8e62..000000000000
--- a/src/arm/imx25-pinfunc.h
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Based on imx35-pinfunc.h in the same directory Which is:
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX25_PINFUNC_H
-#define __DTS_IMX25_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-
-#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
-#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
-#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
-
-#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
-#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
-
-#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
-#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
-
-#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
-#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
-#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
-
-#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
-#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
-#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
-
-#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__FEC_RX_ER			0x024 0x240 0x518 0x17 0x000
-#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
-
-#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
-#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
-#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
-
-#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
-#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
-#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
-
-#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
-#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
-#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
-
-#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
-#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
-#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
-
-#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
-#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
-#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
-
-#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
-#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
-#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
-
-#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
-#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
-#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
-
-#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
-#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
-#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
-
-#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
-#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
-#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
-#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
-#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
-#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
-#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
-
-#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x10 0x000
-#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
-#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x13 0x000
-#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x15 0x000
-
-#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
-#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
-
-#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
-#define MX25_PAD_ECB__UART5_TXD_MUX		0x060 0x270 0x000 0x13 0x000
-#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
-
-#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
-#define MX25_PAD_LBA__UART5_RXD_MUX		0x064 0x274 0x578 0x13 0x000
-#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
-
-#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
-#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
-#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
-#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
-
-#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
-#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
-
-#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
-#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
-#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
-
-#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
-#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
-#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
-
-#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
-#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
-#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
-
-#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
-#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
-
-#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
-#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
-
-#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
-#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
-#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
-
-#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
-#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
-#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
-
-#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
-#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
-#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
-
-#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
-#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
-
-#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
-#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
-
-#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
-#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
-
-#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
-#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
-
-#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
-#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
-
-#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
-#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
-
-#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
-#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
-
-#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
-#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
-
-#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
-#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
-#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
-
-#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
-#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
-#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
-
-#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
-#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
-
-#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
-#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
-
-#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
-#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
-
-#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
-#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
-
-#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
-#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
-
-#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
-#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
-
-#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
-#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
-
-#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
-#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
-
-#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
-#define MX25_PAD_LD10__FEC_RX_ER		0x0f0 0x2e8 0x518 0x15 0x001
-
-#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
-#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
-
-#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
-#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
-
-#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
-#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
-
-#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
-#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
-
-#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
-#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
-
-#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
-#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
-
-#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
-#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
-
-#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
-#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
-
-#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
-#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
-
-#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
-#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
-#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
-
-#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
-#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
-#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
-
-#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
-#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
-
-#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
-#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
-
-#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
-#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
-#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
-#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
-
-#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
-
-#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
-#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
-#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
-#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x10 0x000
-#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x10 0x000
-#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x10 0x000
-#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x11 0x001
-#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x10 0x000
-#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x11 0x001
-#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
-#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
-#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x10 0x000
-#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x12 0x002
-#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_CTS__FEC_RX_ER		0x18c 0x384 0x518 0x12 0x002
-#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
-#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
-#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
-#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
-#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
-#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
-#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x15 0x002
-#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x10 0x002
-#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
-#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW3__CSI_LD1		0x1b4 0x3ac 0x48c 0x13 0x002
-#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX	0x1b8 0x3b0 0x570 0x11 0x001
-#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX	0x1bc 0x3b4 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
-#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
-#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
-#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
-
-#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
-#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
-#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
-
-#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
-#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
-
-#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
-
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
-#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
-#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
-
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
-#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
-
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
-#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
-
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
-#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
-#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
-
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
-#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
-
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
-#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
-#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
-
-#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
-#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
-
-#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
-#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
-#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
-#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
-
-#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/src/arm/imx25.dtsi b/src/arm/imx25.dtsi
deleted file mode 100644
index c1740396b2c9..000000000000
--- a/src/arm/imx25.dtsi
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx25-pinfunc.h"
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &spi1;
-		spi1 = &spi2;
-		spi2 = &spi3;
-		usb0 = &usbotg;
-		usb1 = &usbhost1;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	asic: asic-interrupt-controller@68000000 {
-		compatible = "fsl,imx25-asic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x8000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&asic>;
-		ranges;
-
-		aips@43f00000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			i2c1: i2c@43f80000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f80000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <3>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@43f84000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f84000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			can1: can@43f88000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
-				reg = <0x43f88000 0x4000>;
-				interrupts = <43>;
-				clocks = <&clks 75>, <&clks 75>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can2: can@43f8c000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
-				reg = <0x43f8c000 0x4000>;
-				interrupts = <44>;
-				clocks = <&clks 76>, <&clks 76>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				interrupts = <45>;
-				clocks = <&clks 120>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks 121>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@43f98000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f98000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <4>;
-				status = "disabled";
-			};
-
-			owire@43f9c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x43f9c000 0x4000>;
-				clocks = <&clks 51>;
-				clock-names = "";
-				interrupts = <2>;
-				status = "disabled";
-			};
-
-			spi1: cspi@43fa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 62>, <&clks 62>;
-				clock-names = "ipg", "per";
-				interrupts = <14>;
-				status = "disabled";
-			};
-
-			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
-				reg = <0x43fa8000 0x4000>;
-				clocks = <&clks 102>;
-				clock-names = "";
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@43fac000 {
-				compatible = "fsl,imx25-iomuxc";
-				reg = <0x43fac000 0x4000>;
-			};
-
-			audmux: audmux@43fb0000 {
-				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
-				reg = <0x43fb0000 0x4000>;
-				status = "disabled";
-			};
-		};
-
-		spba@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x40000>;
-			ranges;
-
-			spi3: cspi@50004000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x50004000 0x4000>;
-				interrupts = <0>;
-				clocks = <&clks 80>, <&clks 80>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@50008000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x50008000 0x4000>;
-				interrupts = <5>;
-				clocks = <&clks 123>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				interrupts = <18>;
-				clocks = <&clks 122>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			spi2: cspi@50010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x50010000 0x4000>;
-				clocks = <&clks 79>, <&clks 79>;
-				clock-names = "ipg", "per";
-				interrupts = <13>;
-				status = "disabled";
-			};
-
-			ssi2: ssi@50014000 {
-				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
-				reg = <0x50014000 0x4000>;
-				interrupts = <11>;
-				clocks = <&clks 118>;
-				clock-names = "ipg";
-				dmas = <&sdma 24 1 0>,
-				       <&sdma 25 1 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			esai@50018000 {
-				reg = <0x50018000 0x4000>;
-				interrupts = <7>;
-			};
-
-			uart5: serial@5002c000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x5002c000 0x4000>;
-				interrupts = <40>;
-				clocks = <&clks 124>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			tsc: tsc@50030000 {
-				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
-				reg = <0x50030000 0x4000>;
-				interrupts = <46>;
-				clocks = <&clks 119>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			ssi1: ssi@50034000 {
-				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
-				reg = <0x50034000 0x4000>;
-				interrupts = <12>;
-				clocks = <&clks 117>;
-				clock-names = "ipg";
-				dmas = <&sdma 28 1 0>,
-				       <&sdma 29 1 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			fec: ethernet@50038000 {
-				compatible = "fsl,imx25-fec";
-				reg = <0x50038000 0x4000>;
-				interrupts = <57>;
-				clocks = <&clks 88>, <&clks 65>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-		};
-
-		aips@53f00000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			clks: ccm@53f80000 {
-				compatible = "fsl,imx25-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>;
-				#clock-cells = <1>;
-			};
-
-			gpt4: timer@53f84000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f84000 0x4000>;
-				clocks = <&clks 95>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <1>;
-			};
-
-			gpt3: timer@53f88000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f88000 0x4000>;
-				clocks = <&clks 94>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <29>;
-			};
-
-			gpt2: timer@53f8c000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f8c000 0x4000>;
-				clocks = <&clks 93>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <53>;
-			};
-
-			gpt1: timer@53f90000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				clocks = <&clks 92>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <54>;
-			};
-
-			epit1: timer@53f94000 {
-				compatible = "fsl,imx25-epit";
-				reg = <0x53f94000 0x4000>;
-				interrupts = <28>;
-			};
-
-			epit2: timer@53f98000 {
-				compatible = "fsl,imx25-epit";
-				reg = <0x53f98000 0x4000>;
-				interrupts = <27>;
-			};
-
-			gpio4: gpio@53f9c000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53f9c000 0x4000>;
-				interrupts = <23>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			pwm2: pwm@53fa0000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
-				reg = <0x53fa0000 0x4000>;
-				clocks = <&clks 106>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <36>;
-			};
-
-			gpio3: gpio@53fa4000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <16>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			pwm3: pwm@53fa8000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
-				reg = <0x53fa8000 0x4000>;
-				clocks = <&clks 107>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <41>;
-			};
-
-			esdhc1: esdhc@53fb4000 {
-				compatible = "fsl,imx25-esdhc";
-				reg = <0x53fb4000 0x4000>;
-				interrupts = <9>;
-				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc2: esdhc@53fb8000 {
-				compatible = "fsl,imx25-esdhc";
-				reg = <0x53fb8000 0x4000>;
-				interrupts = <8>;
-				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			lcdc: lcdc@53fbc000 {
-				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			slcdc@53fc0000 {
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <38>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@53fc8000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				reg = <0x53fc8000 0x4000>;
-				clocks = <&clks 108>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <42>;
-			};
-
-			gpio1: gpio@53fcc000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <52>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53fd0000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sdma: sdma@53fd4000 {
-				compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
-				reg = <0x53fd4000 0x4000>;
-				clocks = <&clks 112>, <&clks 68>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				interrupts = <34>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
-			};
-
-			wdog@53fdc000 {
-				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
-				reg = <0x53fdc000 0x4000>;
-				clocks = <&clks 126>;
-				clock-names = "";
-				interrupts = <55>;
-			};
-
-			pwm1: pwm@53fe0000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
-				reg = <0x53fe0000 0x4000>;
-				clocks = <&clks 105>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <26>;
-			};
-
-			iim: iim@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <19>;
-				clocks = <&clks 99>;
-			};
-
-			usbotg: usb@53ff4000 {
-				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
-				reg = <0x53ff4000 0x0200>;
-				interrupts = <37>;
-				clocks = <&clks 70>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbhost1: usb@53ff4400 {
-				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
-				reg = <0x53ff4400 0x0200>;
-				interrupts = <35>;
-				clocks = <&clks 70>;
-				fsl,usbmisc = <&usbmisc 1>;
-				fsl,usbphy = <&usbphy1>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@53ff4600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx25-usbmisc";
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
-				reg = <0x53ff4600 0x00f>;
-			};
-
-			dryice@53ffc000 {
-				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
-				reg = <0x53ffc000 0x4000>;
-				clocks = <&clks 81>;
-				clock-names = "ipg";
-				interrupts = <25>;
-			};
-		};
-
-		iram: sram@78000000 {
-			compatible = "mmio-sram";
-			reg = <0x78000000 0x20000>;
-		};
-
-		emi@80000000 {
-			compatible = "fsl,emi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x3b002000>;
-			ranges;
-
-			nfc: nand@bb000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				compatible = "fsl,imx25-nand";
-				reg = <0xbb000000 0x2000>;
-				clocks = <&clks 50>;
-				clock-names = "";
-				interrupts = <33>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-		};
-	};
-};
diff --git a/src/arm/imx27-apf27.dts b/src/arm/imx27-apf27.dts
deleted file mode 100644
index 73aae4f5e539..000000000000
--- a/src/arm/imx27-apf27.dts
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
- * Copyright 2012 Armadeus Systems <support@armadeus.com>
- *
- * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Armadeus Systems APF27 module";
-	compatible = "armadeus,imx27-apf27", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x04000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-};
-
-&iomuxc {
-	imx27-apf27 {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&nfc {
-	status = "okay";
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "env";
-		reg = <0x100000 0x80000>;
-	};
-
-	partition@180000 {
-		label = "env2";
-		reg = <0x180000 0x80000>;
-	};
-
-	partition@200000 {
-		label = "firmware";
-		reg = <0x200000 0x80000>;
-	};
-
-	partition@280000 {
-		label = "dtb";
-		reg = <0x280000 0x80000>;
-	};
-
-	partition@300000 {
-		label = "kernel";
-		reg = <0x300000 0x500000>;
-	};
-
-	partition@800000 {
-		label = "rootfs";
-		reg = <0x800000 0xf800000>;
-	};
-};
diff --git a/src/arm/imx27-apf27dev.dts b/src/arm/imx27-apf27dev.dts
deleted file mode 100644
index 2b6d489dae69..000000000000
--- a/src/arm/imx27-apf27dev.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/* APF27Dev is a docking board for the APF27 SOM */
-#include "imx27-apf27.dts"
-
-/ {
-	model = "Armadeus Systems APF27Dev docking/development board";
-	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
-
-	display: display {
-		model = "Chimei-LW700AT9003";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;  /* non-standard but required */
-		fsl,pcr = <0xfae80083>;	/* non-standard but required */
-		display-timings {
-			timing0: 800x480 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-key {
-			label = "user";
-			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-			linux,code = <276>; /* BTN_EXTRA */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
-	status = "okay";
-};
-
-&cspi2 {
-	fsl,spi-num-chipselects = <3>;
-	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>,
-		   <&gpio2 17 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
-	status = "okay";
-};
-
-&fb {
-	display = <&display>;
-	fsl,dmacr = <0x00020010>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb1>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,ds1374";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-apf27dev {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-			>;
-		};
-
-		pinctrl_cspi1_cs: cspi1csgrp {
-			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
-		};
-
-		pinctrl_cspi2: cspi2grp {
-			fsl,pins = <
-				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
-				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
-				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-			>;
-		};
-
-		pinctrl_cspi2_cs: cspi2csgrp {
-			fsl,pins = <
-				MX27_PAD_CSI_D5__GPIO2_17 0x0
-				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
-				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
-		};
-
-		pinctrl_imxfb1: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_CLS__CLS 0x0
-				MX27_PAD_CONTRAST__CONTRAST 0x0
-				MX27_PAD_LD0__LD0 0x0
-				MX27_PAD_LD1__LD1 0x0
-				MX27_PAD_LD2__LD2 0x0
-				MX27_PAD_LD3__LD3 0x0
-				MX27_PAD_LD4__LD4 0x0
-				MX27_PAD_LD5__LD5 0x0
-				MX27_PAD_LD6__LD6 0x0
-				MX27_PAD_LD7__LD7 0x0
-				MX27_PAD_LD8__LD8 0x0
-				MX27_PAD_LD9__LD9 0x0
-				MX27_PAD_LD10__LD10 0x0
-				MX27_PAD_LD11__LD11 0x0
-				MX27_PAD_LD12__LD12 0x0
-				MX27_PAD_LD13__LD13 0x0
-				MX27_PAD_LD14__LD14 0x0
-				MX27_PAD_LD15__LD15 0x0
-				MX27_PAD_LD16__LD16 0x0
-				MX27_PAD_LD17__LD17 0x0
-				MX27_PAD_LSCLK__LSCLK 0x0
-				MX27_PAD_OE_ACD__OE_ACD 0x0
-				MX27_PAD_PS__PS 0x0
-				MX27_PAD_REV__REV 0x0
-				MX27_PAD_SPL_SPR__SPL_SPR 0x0
-				MX27_PAD_HSYNC__HSYNC 0x0
-				MX27_PAD_VSYNC__VSYNC 0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA 0x0
-				MX27_PAD_I2C_CLK__I2C_CLK 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_pwm: pwmgrp {
-			fsl,pins = <
-				MX27_PAD_PWMO__PWMO 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-			>;
-		};
-
-		pinctrl_sdhc2_cd: sdhc2cdgrp {
-			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
-		};
-	};
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm>;
-};
diff --git a/src/arm/imx27-eukrea-cpuimx27.dtsi b/src/arm/imx27-eukrea-cpuimx27.dtsi
deleted file mode 100644
index e2242638ea0b..000000000000
--- a/src/arm/imx27-eukrea-cpuimx27.dtsi
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX27";
-	compatible = "eukrea,cpuimx27", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x04000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		clk14745600: clock@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <14745600>;
-			reg = <0>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x04000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
-	};
-
-	uart8250@3,200000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_1>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x200000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,400000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_2>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x400000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_3>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x800000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,1000000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_4>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x1000000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-};
-
-&iomuxc {
-	imx27-eukrea-cpuimx27 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
-				MX27_PAD_ATA_DATA13__FEC_COL		0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA		0x0
-				MX27_PAD_I2C_CLK__I2C_CLK		0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB			0x0
-				MX27_PAD_NFCLE__NFCLE			0x0
-				MX27_PAD_NFWP_B__NFWP_B			0x0
-				MX27_PAD_NFCE_B__NFCE_B			0x0
-				MX27_PAD_NFALE__NFALE			0x0
-				MX27_PAD_NFRE_B__NFRE_B			0x0
-				MX27_PAD_NFWE_B__NFWE_B			0x0
-			>;
-		};
-
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE			0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK		0x0
-				MX27_PAD_SD2_CMD__SD2_CMD		0x0
-				MX27_PAD_SD2_D0__SD2_D0			0x0
-				MX27_PAD_SD2_D1__SD2_D1			0x0
-				MX27_PAD_SD2_D2__SD2_D2			0x0
-				MX27_PAD_SD2_D3__SD2_D3			0x0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
-				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
-				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
-				MX27_PAD_USBH1_FS__UART4_RTS		0x0
-			>;
-		};
-
-		pinctrl_uart8250_1: uart82501grp {
-			fsl,pins = <
-				MX27_PAD_USB_PWR__GPIO2_23		0x0
-			>;
-		};
-
-		pinctrl_uart8250_2: uart82502grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
-			>;
-		};
-
-		pinctrl_uart8250_3: uart82503grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
-			>;
-		};
-
-		pinctrl_uart8250_4: uart82504grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
-			>;
-		};
-
-		pinctrl_usbh2: usbh2grp {
-			fsl,pins = <
-				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
-				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
-				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
-				MX27_PAD_USBH2_STP__USBH2_STP		0x0
-				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
-				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
-				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
-				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
-				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
-				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
-				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
-				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
deleted file mode 100644
index 2ab65fc4c1e1..000000000000
--- a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx27-eukrea-cpuimx27.dtsi"
-
-/ {
-	model = "Eukrea MBIMXSD27";
-	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
-
-	display0: CMO-QVGA {
-		model = "CMO-QVGA";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfad08b80>;
-
-		display-timings {
-			timing0: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <20>;
-				hsync-len = <30>;
-				hfront-porch = <38>;
-				vback-porch = <4>;
-				vsync-len = <3>;
-				vfront-porch = <15>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioleds>;
-
-		led1 {
-			label = "system::live";
-			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "system::user";
-			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		reg_lcd: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcdreg>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "LCD";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&cspi1 {
-	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	ads7846 {
-		compatible = "ti,ads7846";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch>;
-		reg = <0>;
-		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
-		spi-cpol;
-		spi-max-frequency = <1500000>;
-		ti,keep-vref-on;
-	};
-};
-
-&fb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb>;
-	display = <&display0>;
-	lcd-supply = <&reg_lcd>;
-	fsl,dmacr = <0x00040060>;
-	fsl,lscr1 = <0x00120300>;
-	fsl,lpccr = <0x00a903ff>;
-	status = "okay";
-};
-
-&i2c1 {
-	codec: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&kpp {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-	>;
-	status = "okay";
-};
-
-&sdhci1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	codec-handle = <&codec>;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-eukrea-cpuimx27-baseboard {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
-				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX27_PAD_PWMO__GPIO5_5		0x0
-			>;
-		};
-
-		pinctrl_gpioleds: gpioledsgrp {
-			fsl,pins = <
-				MX27_PAD_PC_PWRON__GPIO6_16	0x0
-				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
-			>;
-		};
-
-		pinctrl_imxfb: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_LD0__LD0		0x0
-				MX27_PAD_LD1__LD1		0x0
-				MX27_PAD_LD2__LD2		0x0
-				MX27_PAD_LD3__LD3		0x0
-				MX27_PAD_LD4__LD4		0x0
-				MX27_PAD_LD5__LD5		0x0
-				MX27_PAD_LD6__LD6		0x0
-				MX27_PAD_LD7__LD7		0x0
-				MX27_PAD_LD8__LD8		0x0
-				MX27_PAD_LD9__LD9		0x0
-				MX27_PAD_LD10__LD10		0x0
-				MX27_PAD_LD11__LD11		0x0
-				MX27_PAD_LD12__LD12		0x0
-				MX27_PAD_LD13__LD13		0x0
-				MX27_PAD_LD14__LD14		0x0
-				MX27_PAD_LD15__LD15		0x0
-				MX27_PAD_LD16__LD16		0x0
-				MX27_PAD_LD17__LD17		0x0
-				MX27_PAD_CONTRAST__CONTRAST	0x0
-				MX27_PAD_OE_ACD__OE_ACD		0x0
-				MX27_PAD_HSYNC__HSYNC		0x0
-				MX27_PAD_VSYNC__VSYNC		0x0
-			>;
-		};
-
-		pinctrl_lcdreg: lcdreggrp {
-			fsl,pins = <
-				MX27_PAD_CLS__GPIO1_25		0x0
-			>;
-		};
-
-		pinctrl_sdhc1: sdhc1grp {
-			fsl,pins = <
-				MX27_PAD_SD1_CLK__SD1_CLK	0x0
-				MX27_PAD_SD1_CMD__SD1_CMD	0x0
-				MX27_PAD_SD1_D0__SD1_D0		0x0
-				MX27_PAD_SD1_D1__SD1_D1		0x0
-				MX27_PAD_SD1_D2__SD1_D2		0x0
-				MX27_PAD_SD1_D3__SD1_D3		0x0
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
-				MX27_PAD_SSI4_FS__SSI4_FS	0x0
-				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
-				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
-			>;
-		};
-
-		pinctrl_touch: touchgrp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD	0x0
-				MX27_PAD_UART1_RXD__UART1_RXD	0x0
-				MX27_PAD_UART1_CTS__UART1_CTS	0x0
-				MX27_PAD_UART1_RTS__UART1_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD	0x0
-				MX27_PAD_UART2_RXD__UART2_RXD	0x0
-				MX27_PAD_UART2_CTS__UART2_CTS	0x0
-				MX27_PAD_UART2_RTS__UART2_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX27_PAD_UART3_TXD__UART3_TXD	0x0
-				MX27_PAD_UART3_RXD__UART3_RXD	0x0
-				MX27_PAD_UART3_CTS__UART3_CTS	0x0
-				MX27_PAD_UART3_RTS__UART3_RTS	0x0
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx27-pdk.dts b/src/arm/imx27-pdk.dts
deleted file mode 100644
index 49450dbbcab8..000000000000
--- a/src/arm/imx27-pdk.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Freescale i.MX27 Product Development Kit";
-	compatible = "fsl,imx27-pdk", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>;
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-		};
-	};
-};
-
-&cspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi2>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		compatible = "fsl,mc13783";
-		reg = <0>;
-		spi-cs-high;
-		spi-max-frequency = <1000000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-
-		regulators {
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			gpo3_reg: gpo3 {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-mode = "mii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&kpp {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-	>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	fsl,usbphy = <&usbphy0>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-pdk {
-		pinctrl_cspi2: cspi2grp {
-			fsl,pins = <
-				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
-				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
-				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-				MX27_PAD_CSPI2_SS0__GPIO4_21	0x0 /* SPI2 CS0 */
-				MX27_PAD_TOUT__GPIO3_14		0x0 /* PMIC IRQ */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB	0x0
-				MX27_PAD_NFCLE__NFCLE	0x0
-				MX27_PAD_NFWP_B__NFWP_B	0x0
-				MX27_PAD_NFCE_B__NFCE_B	0x0
-				MX27_PAD_NFALE__NFALE	0x0
-				MX27_PAD_NFRE_B__NFRE_B	0x0
-				MX27_PAD_NFWE_B__NFWE_B	0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx27-phytec-phycard-s-rdk.dts b/src/arm/imx27-phytec-phycard-s-rdk.dts
deleted file mode 100644
index 7c869fe3c30b..000000000000
--- a/src/arm/imx27-phytec-phycard-s-rdk.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright 2012 Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx27-phytec-phycard-s-som.dtsi"
-
-/ {
-	model = "Phytec pca100 rapid development kit";
-	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	display: display {
-		model = "Primeview-PD050VL1";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;  /* non-standard but required */
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			timing0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&fb {
-	display = <&display>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		vcc-supply = <&reg_3v3>;
-		reg = <0x64>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-rdk {
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_owire1: owire1grp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD 0x0
-				MX27_PAD_UART2_RXD__UART2_RXD 0x0
-				MX27_PAD_UART2_CTS__UART2_CTS 0x0
-				MX27_PAD_UART2_RTS__UART2_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX27_PAD_UART3_TXD__UART3_TXD 0x0
-				MX27_PAD_UART3_RXD__UART3_RXD 0x0
-				MX27_PAD_UART3_CTS__UART3_CTS 0x0
-				MX27_PAD_UART3_RTS__UART3_RTS 0x0
-			>;
-		};
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire1>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/src/arm/imx27-phytec-phycard-s-som.dts b/src/arm/imx27-phytec-phycard-s-som.dts
deleted file mode 100644
index c8d57d1d0743..000000000000
--- a/src/arm/imx27-phytec-phycard-s-som.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 0>,
-		<&gpio4 27 0>;
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
diff --git a/src/arm/imx27-phytec-phycard-s-som.dtsi b/src/arm/imx27-phytec-phycard-s-som.dtsi
deleted file mode 100644
index 1b6248079682..000000000000
--- a/src/arm/imx27-phytec-phycard-s-som.dtsi
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/src/arm/imx27-phytec-phycore-rdk.dts b/src/arm/imx27-phytec-phycore-rdk.dts
deleted file mode 100644
index 538568b0de26..000000000000
--- a/src/arm/imx27-phytec-phycore-rdk.dts
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx27-phytec-phycore-som.dtsi"
-
-/ {
-	model = "Phytec pcm970";
-	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	display0: LQ035Q7 {
-		model = "Sharp-LQ035Q7";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xf00080c0>;
-
-		display-timings {
-			timing0: 240x320 {
-				clock-frequency = <5500000>;
-				hactive = <240>;
-				vactive = <320>;
-				hback-porch = <5>;
-				hsync-len = <7>;
-				hfront-porch = <16>;
-				vback-porch = <7>;
-				vsync-len = <1>;
-				vfront-porch = <9>;
-				pixelclk-active = <1>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <0>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_csien>;
-			reg = <2>;
-			regulator-name = "CSI_EN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
-			regulator-always-on;
-		};
-	};
-
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-		};
-	};
-};
-
-&cspi1 {
-	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>;
-};
-
-&fb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb1>;
-	display = <&display0>;
-	lcd-supply = <&reg_5v0>;
-	fsl,dmacr = <0x00020010>;
-	fsl,lscr1 = <0x00120300>;
-	fsl,lpccr = <0x00a903ff>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	camgpio: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&iomuxc {
-	imx27_phycore_rdk {
-		pinctrl_csien: csiengrp {
-			fsl,pins = <
-				MX27_PAD_USB_OC_B__GPIO2_24 0x0
-			>;
-		};
-
-		pinctrl_cspi1cs1: cspi1cs1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
-			>;
-		};
-
-		pinctrl_imxfb1: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_LD0__LD0 0x0
-				MX27_PAD_LD1__LD1 0x0
-				MX27_PAD_LD2__LD2 0x0
-				MX27_PAD_LD3__LD3 0x0
-				MX27_PAD_LD4__LD4 0x0
-				MX27_PAD_LD5__LD5 0x0
-				MX27_PAD_LD6__LD6 0x0
-				MX27_PAD_LD7__LD7 0x0
-				MX27_PAD_LD8__LD8 0x0
-				MX27_PAD_LD9__LD9 0x0
-				MX27_PAD_LD10__LD10 0x0
-				MX27_PAD_LD11__LD11 0x0
-				MX27_PAD_LD12__LD12 0x0
-				MX27_PAD_LD13__LD13 0x0
-				MX27_PAD_LD14__LD14 0x0
-				MX27_PAD_LD15__LD15 0x0
-				MX27_PAD_LD16__LD16 0x0
-				MX27_PAD_LD17__LD17 0x0
-				MX27_PAD_CLS__CLS 0x0
-				MX27_PAD_CONTRAST__CONTRAST 0x0
-				MX27_PAD_LSCLK__LSCLK 0x0
-				MX27_PAD_OE_ACD__OE_ACD 0x0
-				MX27_PAD_PS__PS 0x0
-				MX27_PAD_REV__REV 0x0
-				MX27_PAD_SPL_SPR__SPL_SPR 0x0
-				MX27_PAD_HSYNC__HSYNC 0x0
-				MX27_PAD_VSYNC__VSYNC 0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			/* Add pullup to DATA line */
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA	0x1
-				MX27_PAD_I2C_CLK__I2C_CLK	0x0
-			>;
-		};
-
-		pinctrl_owire1: owire1grp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-				MX27_PAD_SSI3_FS__GPIO3_28	0x0 /* WP */
-				MX27_PAD_SSI3_RXDAT__GPIO3_29	0x0 /* CD */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD 0x0
-				MX27_PAD_UART2_RXD__UART2_RXD 0x0
-				MX27_PAD_UART2_CTS__UART2_CTS 0x0
-				MX27_PAD_UART2_RTS__UART2_RTS 0x0
-			>;
-		};
-
-		pinctrl_usbh2: usbh2grp {
-			fsl,pins = <
-				MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
-				MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
-				MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
-				MX27_PAD_USBH2_STP__USBH2_STP 0x0
-				MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
-				MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
-				MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
-				MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
-				MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
-				MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
-				MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
-				MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX27_PAD_CS4_B__CS4_B		0x0 /* CS4 */
-				MX27_PAD_SD1_D1__GPIO5_19	0x0 /* CAN IRQ */
-			>;
-		};
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire1>;
-	status = "okay";
-};
-
-&pmicleds {
-	ledr1: led@3 {
-		reg = <3>;
-		label = "system:red1:user";
-	};
-
-	ledg1: led@4 {
-		reg = <4>;
-		label = "system:green1:user";
-	};
-
-	ledb1: led@5 {
-		reg = <5>;
-		label = "system:blue1:user";
-	};
-
-	ledr2: led@6 {
-		reg = <6>;
-		label = "system:red2:user";
-	};
-
-	ledg2: led@7 {
-		reg = <7>;
-		label = "system:green2:user";
-	};
-
-	ledb2: led@8 {
-		reg = <8>;
-		label = "system:blue2:user";
-	};
-
-	ledr3: led@9 {
-		reg = <9>;
-		label = "system:red3:nand";
-		linux,default-trigger = "nand-disk";
-	};
-
-	ledg3: led@10 {
-		reg = <10>;
-		label = "system:green3:live";
-		linux,default-trigger = "heartbeat";
-	};
-
-	ledb3: led@11 {
-		reg = <11>;
-		label = "system:blue3:cpu";
-		linux,default-trigger = "cpu0";
-	};
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vmmc1_reg>;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	vbus-supply = <&reg_5v0>;
-	fsl,usbphy = <&usbphy2>;
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-
-	can@4,0 {
-		compatible = "nxp,sja1000";
-		reg = <4 0x00000000 0x00000100>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
-		nxp,external-clock-frequency = <16000000>;
-		nxp,tx-output-config = <0x16>;
-		nxp,no-comparator-bypass;
-		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
-	};
-};
diff --git a/src/arm/imx27-phytec-phycore-som.dts b/src/arm/imx27-phytec-phycore-som.dts
deleted file mode 100644
index 4ec402c38945..000000000000
--- a/src/arm/imx27-phytec-phycore-som.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>;
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <0xcb205000>;
-	};
-
-	pins4 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <0x00001000>;
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 0>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mc13783";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <23 0x4>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			/* SW1A and SW1B joined operation */
-			sw1_reg: sw1a {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1520000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* SW2A and SW2B joined operation */
-			sw2_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			violo_reg: violo {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			viohi_reg: viohi {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vrf1_reg: vrf1 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vrf2_reg: vrf2 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			pwgt1spi_reg: pwgt1spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio3 30 0>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	lm75@4a {
-		compatible = "national,lm75";
-		reg = <0x4a>;
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@c0000000 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	sram: sram@c8000000 {
-		compatible = "mtd-ram";
-		reg = <1 0x00000000 0x00800000>;
-		bank-width = <2>;
-		linux,mtd-name = "mtd-ram.0";
-		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/src/arm/imx27-phytec-phycore-som.dtsi b/src/arm/imx27-phytec-phycore-som.dtsi
deleted file mode 100644
index b4e955e3be8d..000000000000
--- a/src/arm/imx27-phytec-phycore-som.dtsi
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_5v0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-		};
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <0xcb205000>;
-	};
-
-	pins4 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <0x00001000>;
-	};
-};
-
-&cspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		compatible = "fsl,mc13783";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0>;
-		spi-cs-high;
-		spi-max-frequency = <20000000>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		pmicleds: leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
-		};
-
-		regulators {
-			/* SW1A and SW1B joined operation */
-			sw1_reg: sw1a {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1520000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* SW2A and SW2B joined operation */
-			sw2_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			violo_reg: violo {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			viohi_reg: viohi {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vrf1_reg: vrf1 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vrf2_reg: vrf2 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			pwgt1spi_reg: pwgt1spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	lm75@4a {
-		compatible = "national,lm75";
-		reg = <0x4a>;
-	};
-};
-
-&iomuxc {
-	imx27_phycore_som {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX27_PAD_SSI1_FS__SSI1_FS 0x0
-				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
-				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
-				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&ssi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	phy_type = "ulpi";
-	fsl,usbphy = <&usbphy0>;
-	vbus-supply = <&sw3_reg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	sram: sram@1,0 {
-		compatible = "mtd-ram";
-		reg = <1 0x00000000 0x00800000>;
-		bank-width = <2>;
-		linux,mtd-name = "mtd-ram.0";
-		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/src/arm/imx27-pinfunc.h b/src/arm/imx27-pinfunc.h
deleted file mode 100644
index 597bb5f74dcc..000000000000
--- a/src/arm/imx27-pinfunc.h
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DTS_IMX27_PINFUNC_H
-#define __DTS_IMX27_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <pin mux_id>
- * mux_id consists of
- * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
- *
- * function:      0 - Primary function
- *                1 - Alternate function
- *                2 - GPIO
- * direction:     0 - Input
- *                1 - Output
- * gpio_oconf:    0 - A_IN
- *                1 - B_IN
- *                2 - C_IN
- *                3 - Data Register
- * gpio_iconfa/b: 0 - GPIO_IN
- *                1 - Interrupt Status Register
- *                2 - 0
- *                3 - 1
- *
- * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
- */
-
-#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
-#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
-#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
-#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
-#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
-#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
-#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
-#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
-#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
-#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
-#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
-#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
-#define MX27_PAD_LD0__LD0                                  0x06 0x004
-#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
-#define MX27_PAD_LD1__LD1                                  0x07 0x004
-#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
-#define MX27_PAD_LD2__LD2                                  0x08 0x004
-#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
-#define MX27_PAD_LD3__LD3                                  0x09 0x004
-#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
-#define MX27_PAD_LD4__LD4                                  0x0a 0x004
-#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
-#define MX27_PAD_LD5__LD5                                  0x0b 0x004
-#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
-#define MX27_PAD_LD6__LD6                                  0x0c 0x004
-#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
-#define MX27_PAD_LD7__LD7                                  0x0d 0x004
-#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
-#define MX27_PAD_LD8__LD8                                  0x0e 0x004
-#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
-#define MX27_PAD_LD9__LD9                                  0x0f 0x004
-#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
-#define MX27_PAD_LD10__LD10                                0x10 0x004
-#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
-#define MX27_PAD_LD11__LD11                                0x11 0x004
-#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
-#define MX27_PAD_LD12__LD12                                0x12 0x004
-#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
-#define MX27_PAD_LD13__LD13                                0x13 0x004
-#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
-#define MX27_PAD_LD14__LD14                                0x14 0x004
-#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
-#define MX27_PAD_LD15__LD15                                0x15 0x004
-#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
-#define MX27_PAD_LD16__LD16                                0x16 0x004
-#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
-#define MX27_PAD_LD17__LD17                                0x17 0x004
-#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
-#define MX27_PAD_REV__REV                                  0x18 0x004
-#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
-#define MX27_PAD_CLS__CLS                                  0x19 0x004
-#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
-#define MX27_PAD_PS__PS                                    0x1a 0x004
-#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
-#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
-#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
-#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
-#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
-#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
-#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
-#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
-#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
-#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
-#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
-#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
-#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
-#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
-#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
-#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
-#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
-#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
-#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
-#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
-#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
-#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
-#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
-#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
-#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
-#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
-#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
-#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
-#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
-#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
-#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
-#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
-#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
-#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
-#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
-#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
-#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
-#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
-#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
-#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
-#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
-#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
-#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
-#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
-#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
-#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
-#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
-#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
-#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
-#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
-#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
-#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
-#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
-#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
-#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
-#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
-#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
-#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
-#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
-#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
-#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
-#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
-#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
-#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
-#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
-#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
-#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
-#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
-#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
-#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
-#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
-#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
-#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
-#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
-#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
-#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
-#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
-#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
-#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
-#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
-#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
-#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
-#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
-#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
-#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
-#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
-#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
-#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
-#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
-#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
-#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
-#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
-#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
-#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
-#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
-#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
-#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
-#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
-#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
-#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
-#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
-#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
-#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
-#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
-#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
-#define MX27_PAD_TIN__TIN                                  0x4f 0x000
-#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
-#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
-#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
-#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
-#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
-#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
-#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
-#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
-#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
-#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
-#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
-#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
-#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
-#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
-#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
-#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
-#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
-#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
-#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
-#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
-#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
-#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
-#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
-#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
-#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
-#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
-#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
-#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
-#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
-#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
-#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
-#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
-#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
-#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
-#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
-#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
-#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
-#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
-#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
-#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
-#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
-#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
-#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
-#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
-#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
-#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
-#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
-#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
-#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
-#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
-#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
-#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
-#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
-#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
-#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
-#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
-#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
-#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
-#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
-#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
-#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
-#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
-#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
-#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
-#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
-#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
-#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
-#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
-#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
-#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
-#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
-#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
-#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
-#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
-#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
-#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
-#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
-#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
-#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
-#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
-#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
-#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
-#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
-#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
-#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
-#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
-#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
-#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
-#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
-#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
-#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
-#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
-#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
-#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
-#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
-#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
-#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
-#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
-#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
-#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
-#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
-#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
-#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
-#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
-#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
-#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
-#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
-#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
-#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
-#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
-#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
-#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
-#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
-#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
-#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
-#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
-#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
-#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
-#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
-#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
-#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
-#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
-#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
-#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
-#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
-#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
-#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
-#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
-#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
-#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
-#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
-#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
-#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
-#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
-#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
-#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
-#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
-#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
-#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
-#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
-#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
-#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
-#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
-#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
-#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
-#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
-#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
-#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
-#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
-#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
-#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
-#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
-#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
-#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
-#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
-#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
-#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
-#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
-#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
-#define MX27_PAD_PWMO__PWMO                                0x85 0x004
-#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
-#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
-#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
-#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
-#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
-#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
-#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
-#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
-#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
-#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
-#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
-#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
-#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
-#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
-#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
-#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
-#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
-#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
-#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
-#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
-#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
-#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
-#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
-#define MX27_PAD_RTCK__RTCK                                0x90 0x004
-#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
-#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
-#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
-#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
-#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
-#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
-#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
-#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
-#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
-#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
-#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
-#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
-#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
-#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
-#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
-#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
-#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
-#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
-#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
-#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
-#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
-#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
-#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
-#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
-#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
-#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
-#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
-#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
-#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
-#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
-#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
-#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
-#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
-#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
-#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
-#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
-#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
-#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
-#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
-#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
-#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
-#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
-#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
-#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
-#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
-#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
-#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
-#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
-#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
-#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
-#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
-#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
-#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
-#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
-#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
-#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
-#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
-#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
-#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
-#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
-#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
-#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
-#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
-#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
-#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
-#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
-#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
-#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
-#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
-#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
-#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
-#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
-#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
-#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
-#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
-#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
-#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
-#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
-#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
-#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
-#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
-#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
-#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
-#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
-#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
-#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
-#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
-#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
-#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
-#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
-#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
-#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
-#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
-#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
-#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
-#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
-
-#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/src/arm/imx27.dtsi b/src/arm/imx27.dtsi
deleted file mode 100644
index 107d713e1cbe..000000000000
--- a/src/arm/imx27.dtsi
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx27-pinfunc.h"
-
-#include <dt-bindings/clock/imx27-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		spi0 = &cspi1;
-		spi1 = &cspi2;
-		spi2 = &cspi3;
-	};
-
-	aitc: aitc-interrupt-controller@e0000000 {
-		compatible = "fsl,imx27-aitc", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x10040000 0x1000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			operating-points = <
-				/* kHz uV */
-				266000 1300000
-				399000 1450000
-			>;
-			clock-latency = <62500>;
-			clocks = <&clks IMX27_CLK_CPU_DIV>;
-			voltage-tolerance = <5>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&aitc>;
-		ranges;
-
-		aipi@10000000 { /* AIPI1 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10000000 0x20000>;
-			ranges;
-
-			dma: dma@10001000 {
-				compatible = "fsl,imx27-dma";
-				reg = <0x10001000 0x1000>;
-				interrupts = <32>;
-				clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
-					 <&clks IMX27_CLK_DMA_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <1>;
-				#dma-channels = <16>;
-			};
-
-			wdog: wdog@10002000 {
-				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
-				reg = <0x10002000 0x1000>;
-				interrupts = <27>;
-				clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
-			};
-
-			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10003000 0x1000>;
-				interrupts = <26>;
-				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10004000 0x1000>;
-				interrupts = <25>;
-				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10005000 0x1000>;
-				interrupts = <24>;
-				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm: pwm@10006000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx27-pwm";
-				reg = <0x10006000 0x1000>;
-				interrupts = <23>;
-				clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			kpp: kpp@10008000 {
-				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
-				reg = <0x10008000 0x1000>;
-				interrupts = <21>;
-				clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
-				status = "disabled";
-			};
-
-			owire: owire@10009000 {
-				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
-				reg = <0x10009000 0x1000>;
-				clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
-				status = "disabled";
-			};
-
-			uart1: serial@1000a000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000a000 0x1000>;
-				interrupts = <20>;
-				clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@1000b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000b000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@1000c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000c000 0x1000>;
-				interrupts = <18>;
-				clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@1000d000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000d000 0x1000>;
-				interrupts = <17>;
-				clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi1: cspi@1000e000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000e000 0x1000>;
-				interrupts = <16>;
-				clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi2: cspi@1000f000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000f000 0x1000>;
-				interrupts = <15>;
-				clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ssi1: ssi@10010000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10010000 0x1000>;
-				interrupts = <14>;
-				clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
-				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			ssi2: ssi@10011000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10011000 0x1000>;
-				interrupts = <13>;
-				clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
-				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@10012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x10012000 0x1000>;
-				interrupts = <12>;
-				clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
-				status = "disabled";
-			};
-
-			sdhci1: sdhci@10013000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10013000 0x1000>;
-				interrupts = <11>;
-				clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 7>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			sdhci2: sdhci@10014000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10014000 0x1000>;
-				interrupts = <10>;
-				clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 6>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@10015000 {
-				compatible = "fsl,imx27-iomuxc";
-				reg = <0x10015000 0x600>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				gpio1: gpio@10015000 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015000 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@10015100 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015100 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@10015200 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015200 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@10015300 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015300 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio5: gpio@10015400 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015400 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio6: gpio@10015500 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015500 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-			};
-
-			audmux: audmux@10016000 {
-				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
-				reg = <0x10016000 0x1000>;
-				clocks = <&clks IMX27_CLK_DUMMY>;
-				clock-names = "audmux";
-				status = "disabled";
-			};
-
-			cspi3: cspi@10017000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x10017000 0x1000>;
-				interrupts = <6>;
-				clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10019000 0x1000>;
-				interrupts = <4>;
-				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x1001a000 0x1000>;
-				interrupts = <3>;
-				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			uart5: serial@1001b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001b000 0x1000>;
-				interrupts = <49>;
-				clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@1001c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001c000 0x1000>;
-				interrupts = <48>;
-				clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@1001d000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x1001d000 0x1000>;
-				interrupts = <1>;
-				clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
-				status = "disabled";
-			};
-
-			sdhci3: sdhci@1001e000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x1001e000 0x1000>;
-				interrupts = <9>;
-				clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 36>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x1001f000 0x1000>;
-				interrupts = <2>;
-				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-		};
-
-		aipi@10020000 { /* AIPI2 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10020000 0x20000>;
-			ranges;
-
-			fb: fb@10021000 {
-				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
-				interrupts = <61>;
-				reg = <0x10021000 0x1000>;
-				clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
-					 <&clks IMX27_CLK_LCDC_AHB_GATE>,
-					 <&clks IMX27_CLK_PER3_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			coda: coda@10023000 {
-				compatible = "fsl,imx27-vpu";
-				reg = <0x10023000 0x0200>;
-				interrupts = <53>;
-				clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
-					 <&clks IMX27_CLK_VPU_AHB_GATE>;
-				clock-names = "per", "ahb";
-				iram = <&iram>;
-			};
-
-			usbotg: usb@10024000 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024000 0x200>;
-				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
-				fsl,usbmisc = <&usbmisc 0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@10024200 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024200 0x200>;
-				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
-				fsl,usbmisc = <&usbmisc 1>;
-				status = "disabled";
-			};
-
-			usbh2: usb@10024400 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024400 0x200>;
-				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
-				fsl,usbmisc = <&usbmisc 2>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@10024600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx27-usbmisc";
-				reg = <0x10024600 0x200>;
-				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
-			};
-
-			sahara2: sahara@10025000 {
-				compatible = "fsl,imx27-sahara";
-				reg = <0x10025000 0x1000>;
-				interrupts = <59>;
-				clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
-					 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-			};
-
-			clks: ccm@10027000{
-				compatible = "fsl,imx27-ccm";
-				reg = <0x10027000 0x1000>;
-				#clock-cells = <1>;
-			};
-
-			iim: iim@10028000 {
-				compatible = "fsl,imx27-iim";
-				reg = <0x10028000 0x1000>;
-				interrupts = <62>;
-				clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
-			};
-
-			fec: ethernet@1002b000 {
-				compatible = "fsl,imx27-fec";
-				reg = <0x1002b000 0x4000>;
-				interrupts = <50>;
-				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
-					 <&clks IMX27_CLK_FEC_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-		};
-
-		nfc: nand@d8000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-nand";
-			reg = <0xd8000000 0x1000>;
-			interrupts = <29>;
-			clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
-			status = "disabled";
-		};
-
-		weim: weim@d8002000 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-weim";
-			reg = <0xd8002000 0x1000>;
-			clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
-			ranges = <
-				0 0 0xc0000000 0x08000000
-				1 0 0xc8000000 0x08000000
-				2 0 0xd0000000 0x02000000
-				3 0 0xd2000000 0x02000000
-				4 0 0xd4000000 0x02000000
-				5 0 0xd6000000 0x02000000
-			>;
-			status = "disabled";
-		};
-
-		iram: iram@ffff4c00 {
-			compatible = "mmio-sram";
-			reg = <0xffff4c00 0xb400>;
-		};
-	};
-};
diff --git a/src/arm/imx28-apf28.dts b/src/arm/imx28-apf28.dts
deleted file mode 100644
index 7198fe3798c6..000000000000
--- a/src/arm/imx28-apf28.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Armadeus Systems APF28 module";
-	compatible = "armadeus,imx28-apf28", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
-
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
-
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
-
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
-
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
-
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
-
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/imx28-apf28dev.dts b/src/arm/imx28-apf28dev.dts
deleted file mode 100644
index 221cac4fb2cd..000000000000
--- a/src/arm/imx28-apf28dev.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/* APF28Dev is a docking board for the APF28 SOM */
-#include "imx28-apf28.dts"
-
-/ {
-	model = "Armadeus Systems APF28Dev docking/development board";
-	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio0 23 0>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 23 1>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio0 21 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm 3 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio0 17 0>;
-			linux,code = <0x100>;
-		};
-	};
-};
diff --git a/src/arm/imx28-apx4devkit.dts b/src/arm/imx28-apx4devkit.dts
deleted file mode 100644
index e1ce9179db63..000000000000
--- a/src/arm/imx28-apx4devkit.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Bluegiga APX4 Development Kit";
-	compatible = "bluegiga,apx4devkit", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "bluegiga,apx4devkit-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "apx4devkit-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 28 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/src/arm/imx28-cfa10036.dts b/src/arm/imx28-cfa10036.dts
deleted file mode 100644
index b04b6b8850a7..000000000000
--- a/src/arm/imx28-cfa10036.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Crystalfontz CFA-10036 Board";
-	compatible = "crystalfontz,cfa10036", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 0>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cfa10036>;
-
-		power {
-			gpios = <&gpio3 4 1>;
-			default-state = "on";
-		};
-	};
-
-	reg_vddio_sd0: vddio-sd0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc_pwr_cfa10036>;
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-};
diff --git a/src/arm/imx28-cfa10037.dts b/src/arm/imx28-cfa10037.dts
deleted file mode 100644
index e5beaa58bb40..000000000000
--- a/src/arm/imx28-cfa10037.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10037 Board";
-	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10037: usb-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10037: mac0-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10037>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10037>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-};
diff --git a/src/arm/imx28-cfa10049.dts b/src/arm/imx28-cfa10049.dts
deleted file mode 100644
index 7d51459de5e8..000000000000
--- a/src/arm/imx28-cfa10049.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10049 Board";
-	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			i2cmux {
-				compatible = "i2c-mux-gpio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2cmux_pins_cfa10049>;
-				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-				i2c-parent = <&i2c1>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					adc0: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					adc1: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					adc2: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@3 {
-					reg = <3>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pca9555: pca9555@20 {
-						compatible = "nxp,pca9555";
-						pinctrl-names = "default";
-						pinctrl-0 = <&pca_pins_cfa10049>;
-						interrupt-parent = <&gpio2>;
-						interrupts = <19 0x2>;
-						gpio-controller;
-						#gpio-cells = <2>;
-						interrupt-controller;
-						#interrupt-cells = <2>;
-						reg = <0x20>;
-					};
-				};
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10049>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
-		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
-		num-chipselects = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio5: gpio5@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-
-		gpio6: gpio6@1 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <1>;
-			registers-number = <4>;
-			spi-max-frequency = <100000>;
-		};
-
-		dac0: dh2228@2 {
-			compatible = "rohm,dh2228fv";
-			reg = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rotary_button {
-			label = "rotary_button";
-			gpios = <&gpio3 26 1>;
-			debounce-interval = <10>;
-			linux,code = <28>;
-		};
-	};
-
-	rotary {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_pins_cfa10049>;
-		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
-		linux,axis = <1>; /* REL_Y */
-		rotary-encoder,relative-axis;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-	};
-
-	onewire@0 {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_gpio_pins>;
-		status = "okay";
-		gpios = <&gpio1 21 0>;
-	};
-};
diff --git a/src/arm/imx28-cfa10055.dts b/src/arm/imx28-cfa10055.dts
deleted file mode 100644
index c3900e7ba331..000000000000
--- a/src/arm/imx28-cfa10055.dts
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * 				  Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10055 Board";
-	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10055>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx28-cfa10056.dts b/src/arm/imx28-cfa10056.dts
deleted file mode 100644
index cef959a97219..000000000000
--- a/src/arm/imx28-cfa10056.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
diff --git a/src/arm/imx28-cfa10057.dts b/src/arm/imx28-cfa10057.dts
deleted file mode 100644
index c4e00ce4b6da..000000000000
--- a/src/arm/imx28-cfa10057.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10057 Board";
-	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10057>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-};
diff --git a/src/arm/imx28-cfa10058.dts b/src/arm/imx28-cfa10058.dts
deleted file mode 100644
index 7c9cc783f0d1..000000000000
--- a/src/arm/imx28-cfa10058.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10058 Board";
-	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10058>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx28-duckbill.dts b/src/arm/imx28-duckbill.dts
deleted file mode 100644
index ce1a7effba37..000000000000
--- a/src/arm/imx28-duckbill.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_a: led_gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a>;
-
-		status {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		failure {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/imx28-eukrea-mbmx283lc.dts b/src/arm/imx28-eukrea-mbmx283lc.dts
deleted file mode 100644
index 7c1572c5a4fb..000000000000
--- a/src/arm/imx28-eukrea-mbmx283lc.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
- */
-
-/dts-v1/;
-#include "imx28-eukrea-mbmx28lc.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX283LC";
-	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl{
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283>;
-
-	hog_pins_cpuimx283: hog-cpuimx283@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/src/arm/imx28-eukrea-mbmx287lc.dts b/src/arm/imx28-eukrea-mbmx287lc.dts
deleted file mode 100644
index e773144e1e03..000000000000
--- a/src/arm/imx28-eukrea-mbmx287lc.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
- */
-
-#include "imx28-eukrea-mbmx283lc.dts"
-
-/ {
-	model = "Eukrea Electromatique MBMX287LC";
-	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
-	hog_pins_cpuimx287: hog-cpuimx287@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SPDIF__GPIO_3_27
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/src/arm/imx28-eukrea-mbmx28lc.dtsi b/src/arm/imx28-eukrea-mbmx28lc.dtsi
deleted file mode 100644
index 927b391d2058..000000000000
--- a/src/arm/imx28-eukrea-mbmx28lc.dtsi
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX28LC";
-	compatible = "eukrea,mbmx28lc", "fsl,imx28";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 1000000>;
-		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
-		default-brightness-level = <10>;
-	};
-
-	button-sw3 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
-
-		sw3 {
-			label = "SW3";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-		};
-	};
-
-	button-sw4 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
-
-		sw4 {
-			label = "SW4";
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-		};
-	};
-
-	led-d6 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
-
-		led1 {
-			label = "d6";
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-d7 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
-
-		led1 {
-			label = "d7";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-mbmx28lc-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_4pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&saif0>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
-	lcd-supply = <&reg_lcd_3v3>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		model = "43WVF1G-0";
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9072000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <10>;
-				hfront-porch = <5>;
-				vback-porch = <8>;
-				vfront-porch = <8>;
-				hsync-len = <40>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&pinctrl {
-	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D21__GPIO_1_21
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D20__GPIO_1_20
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_VSYNC__LCD_VSYNC
-			MX28_PAD_LCD_HSYNC__LCD_HSYNC
-			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-			MX28_PAD_LCD_ENABLE__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D23__GPIO_1_23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D22__GPIO_1_22
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D18__GPIO_1_18
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D19__GPIO_1_19
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm4_pins_a>;
-	status = "okay";
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <4>;
-	cd-inverted;
-	status = "okay";
-};
-
-&usb0 {
-	disable-over-current;
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pins_b>;
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/src/arm/imx28-evk.dts b/src/arm/imx28-evk.dts
deleted file mode 100644
index e4cc44c98585..000000000000
--- a/src/arm/imx28-evk.dts
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: ssp@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33500000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <89>;
-							hfront-porch = <164>;
-							vback-porch = <23>;
-							vfront-porch = <10>;
-							hsync-len = <10>;
-							vsync-len = <10>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "at24,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_fec_3v3: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 15 0>;
-		};
-
-		reg_usb0_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-
-		reg_lcd_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 0>;
-			enable-active-high;
-		};
-
-		reg_can_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 13 0>;
-			enable-active-high;
-		};
-
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx28-m28.dtsi b/src/arm/imx28-m28.dtsi
deleted file mode 100644
index 759cc56253dd..000000000000
--- a/src/arm/imx28-m28.dtsi
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx28.dtsi"
-
-/ {
-	model = "DENX M28";
-	compatible = "denx,m28", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "bootloader";
-					reg = <0x00000000 0x00300000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "environment";
-					reg = <0x00300000 0x00080000>;
-				};
-
-				partition@2 {
-					label = "redundant-environment";
-					reg = <0x00380000 0x00080000>;
-				};
-
-				partition@3 {
-					label = "kernel";
-					reg = <0x00400000 0x00400000>;
-				};
-
-				partition@4 {
-					label = "filesystem";
-					reg = <0x00800000 0x0f800000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "stm,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/imx28-m28cu3.dts b/src/arm/imx28-m28cu3.dts
deleted file mode 100644
index 9348ce59dda4..000000000000
--- a/src/arm/imx28-m28cu3.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "MSR M28CU3";
-	compatible = "msr,m28cu3", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display>;
-				status = "okay";
-
-				display: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_gpio>;
-
-		user1 {
-			label = "sd0-led";
-			gpios = <&gpio2 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "sd1-led";
-			gpios = <&gpio2 24 0>;
-			linux,default-trigger = "mmc2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 0>;
-		};
-
-		reg_vddio_sd1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vddio-sd1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 19 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/src/arm/imx28-m28evk.dts b/src/arm/imx28-m28evk.dts
deleted file mode 100644
index b3c09ae3b928..000000000000
--- a/src/arm/imx28-m28evk.dts
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28-m28.dtsi"
-
-/ {
-	model = "DENX M28EVK";
-	compatible = "denx,m28evk", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	regulators {
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 12 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 13 0>;
-		};
-	};
-
-	sound {
-		compatible = "denx,m28evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "m28evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
diff --git a/src/arm/imx28-pinfunc.h b/src/arm/imx28-pinfunc.h
deleted file mode 100644
index e11f69ba0fe4..000000000000
--- a/src/arm/imx28-pinfunc.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
-#define __DT_BINDINGS_MX28_PINCTRL_H__
-
-#include "mxs-pinfunc.h"
-
-#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
-#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
-#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
-#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
-#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
-#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
-#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
-#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
-#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
-#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
-#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
-#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
-#define MX28_PAD_LCD_D00__LCD_D0			0x1000
-#define MX28_PAD_LCD_D01__LCD_D1			0x1010
-#define MX28_PAD_LCD_D02__LCD_D2			0x1020
-#define MX28_PAD_LCD_D03__LCD_D3			0x1030
-#define MX28_PAD_LCD_D04__LCD_D4			0x1040
-#define MX28_PAD_LCD_D05__LCD_D5			0x1050
-#define MX28_PAD_LCD_D06__LCD_D6			0x1060
-#define MX28_PAD_LCD_D07__LCD_D7			0x1070
-#define MX28_PAD_LCD_D08__LCD_D8			0x1080
-#define MX28_PAD_LCD_D09__LCD_D9			0x1090
-#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
-#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
-#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
-#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
-#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
-#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
-#define MX28_PAD_LCD_D16__LCD_D16			0x1100
-#define MX28_PAD_LCD_D17__LCD_D17			0x1110
-#define MX28_PAD_LCD_D18__LCD_D18			0x1120
-#define MX28_PAD_LCD_D19__LCD_D19			0x1130
-#define MX28_PAD_LCD_D20__LCD_D20			0x1140
-#define MX28_PAD_LCD_D21__LCD_D21			0x1150
-#define MX28_PAD_LCD_D22__LCD_D22			0x1160
-#define MX28_PAD_LCD_D23__LCD_D23			0x1170
-#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
-#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
-#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
-#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
-#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
-#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
-#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
-#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
-#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
-#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
-#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
-#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
-#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
-#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
-#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
-#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
-#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
-#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
-#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
-#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
-#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
-#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
-#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
-#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
-#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
-#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
-#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
-#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
-#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
-#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
-#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
-#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
-#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
-#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
-#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
-#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
-#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
-#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
-#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
-#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
-#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
-#define MX28_PAD_PWM0__PWM_0				0x3100
-#define MX28_PAD_PWM1__PWM_1				0x3110
-#define MX28_PAD_PWM2__PWM_2				0x3120
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
-#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
-#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
-#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
-#define MX28_PAD_PWM3__PWM_3				0x31c0
-#define MX28_PAD_PWM4__PWM_4				0x31d0
-#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
-#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
-#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
-#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
-#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
-#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
-#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
-#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
-#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
-#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
-#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
-#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
-#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
-#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
-#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
-#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
-#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
-#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
-#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
-#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
-#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
-#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
-#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
-#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
-#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
-#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
-#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
-#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
-#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
-#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
-#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
-#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
-#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
-#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
-#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
-#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
-#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
-#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
-#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
-#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
-#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
-#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
-#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
-#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
-#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
-#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
-#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
-#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
-#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
-#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
-#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
-#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
-#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
-#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
-#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
-#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
-#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
-#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
-#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
-#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
-#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
-#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
-#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
-#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
-#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
-#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
-#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
-#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
-#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
-#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
-#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
-#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
-#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
-#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
-#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
-#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
-#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
-#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
-#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
-#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
-#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
-#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
-#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
-#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
-#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
-#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
-#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
-#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
-#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
-#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
-#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
-#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
-#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
-#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
-#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
-#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
-#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
-#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
-#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
-#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
-#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
-#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
-#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
-#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
-#define MX28_PAD_PWM0__I2C1_SCL				0x3101
-#define MX28_PAD_PWM1__I2C1_SDA				0x3111
-#define MX28_PAD_PWM2__USB0_ID				0x3121
-#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
-#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
-#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
-#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
-#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
-#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
-#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
-#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
-#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
-#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
-#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
-#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
-#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
-#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
-#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
-#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
-#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
-#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
-#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
-#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
-#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
-#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
-#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
-#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
-#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
-#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
-#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
-#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
-#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
-#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
-#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
-#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
-#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
-#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
-#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
-#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
-#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
-#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
-#define MX28_PAD_AUART1_RX__PWM_0			0x3042
-#define MX28_PAD_AUART1_TX__PWM_1			0x3052
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
-#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
-#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
-#define MX28_PAD_PWM0__DUART_RX				0x3102
-#define MX28_PAD_PWM1__DUART_TX				0x3112
-#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
-#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
-#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
-#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
-#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
-#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
-#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
-#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
-#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
-#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
-#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
-#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
-#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
-#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
-#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
-#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
-#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
-#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
-#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
-#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
-#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
-#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
-#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
-#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
-#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
-#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
-#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
-#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
-#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
-#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
-#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
-#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
-#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
-#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
-#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
-#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
-#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
-#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
-#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
-#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
-#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
-#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
-#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
-#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
-#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
-#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
-#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
-#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
-#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
-#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
-#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
-#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
-#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
-#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
-#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
-#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
-#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
-#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
-#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
-#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
-#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
-#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
-#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
-#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
-#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
-#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
-#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
-#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
-#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
-#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
-#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
-#define MX28_PAD_PWM0__GPIO_3_16			0x3103
-#define MX28_PAD_PWM1__GPIO_3_17			0x3113
-#define MX28_PAD_PWM2__GPIO_3_18			0x3123
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
-#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
-#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
-#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
-#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
-#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
-#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
-#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
-#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
-#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
-#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
-
-#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/src/arm/imx28-sps1.dts b/src/arm/imx28-sps1.dts
deleted file mode 100644
index 0ce3cb8e7914..000000000000
--- a/src/arm/imx28-sps1.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
diff --git a/src/arm/imx28-tx28.dts b/src/arm/imx28-tx28.dts
deleted file mode 100644
index e14bd86f3e99..000000000000
--- a/src/arm/imx28-tx28.dts
+++ /dev/null
@@ -1,661 +0,0 @@
-/*
- * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Ka-Ro electronics TX28 module";
-	compatible = "karo,tx28", "fsl,imx28";
-
-	aliases {
-		can0 = &can0;
-		can1 = &can1;
-		display = &display;
-		ds1339 = &ds1339;
-		gpio5 = &gpio5;
-		lcdif = &lcdif;
-		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
-		lcdif_24bit_pins = &lcdif_24bit_pins_a;
-		stk5led = &user_led;
-		usbotg = &usb0;
-	};
-
-	memory {
-		reg = <0 0>; /* will be filled in by U-Boot */
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio2 7 0>;
-		status = "disabled";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 18 0>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 27 0>;
-			enable-active-high;
-		};
-
-		reg_2p5v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_can_xcvr: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
-		};
-
-		reg_lcd: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LCD POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 31 0>;
-			enable-active-high;
-		};
-
-		reg_lcd_reset: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "LCD RESET";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 0>;
-			startup-delay-us = <300000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mclk: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-tx28-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-tx28-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led: user {
-			label = "Heartbeat";
-			gpios = <&gpio4 10 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 500000>;
-		/*
-		 * a silly way to create a 1:1 relationship between the
-		 * PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	matrix_keypad: matrix-keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		col-gpios = <
-			&gpio5 0 0
-			&gpio5 1 0
-			&gpio5 2 0
-			&gpio5 3 0
-		>;
-		row-gpios = <
-			&gpio5 4 0
-			&gpio5 5 0
-			&gpio5 6 0
-			&gpio5 7 0
-		>;
-		/* sample keymap */
-		linux,keymap = <
-			0x00000074 /* row 0, col 0, KEY_POWER */
-			0x00010052 /* row 0, col 1, KEY_KP0 */
-			0x0002004f /* row 0, col 2, KEY_KP1 */
-			0x00030050 /* row 0, col 3, KEY_KP2 */
-			0x01000051 /* row 1, col 0, KEY_KP3 */
-			0x0101004b /* row 1, col 1, KEY_KP4 */
-			0x0102004c /* row 1, col 2, KEY_KP5 */
-			0x0103004d /* row 1, col 3, KEY_KP6 */
-			0x02000047 /* row 2, col 0, KEY_KP7 */
-			0x02010048 /* row 2, col 1, KEY_KP8 */
-			0x02020049 /* row 2, col 2, KEY_KP9 */
-		>;
-		gpio-activelow;
-		linux,wakeup;
-		debounce-delay-ms = <100>;
-		col-scan-delay-us = <5000>;
-		linux,no-autorepeat;
-	};
-};
-
-/* 2nd TX-Std UART - (A)UART1  */
-&auart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart1_pins_a>;
-	status = "okay";
-};
-
-/* 3rd TX-Std UART - (A)UART3  */
-&auart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart3_pins_a>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0_pins_a>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can1_pins_a>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&digctl {
-	status = "okay";
-};
-
-/* 1st TX-Std UART - (D)UART */
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_4pins_a>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	sgtl5000: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&mclk>;
-	};
-
-	gpio5: pca953x@20 {
-		compatible = "nxp,pca9554";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_pca9554_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <5 0>;
-		reset-gpios = <&gpio2 6 1>;
-		wake-gpios = <&gpio4 9 0>;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_tsc2007_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
-		pendown-gpio = <&gpio3 20 1>;
-		ti,x-plate-ohms = /bits/ 16 <660>;
-	};
-
-	ds1339: rtc@68 {
-		compatible = "mxim,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
-	lcd-supply = <&reg_lcd>;
-	display = <&display>;
-	status = "okay";
-
-	display: display@0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-		display-timings {
-			native-mode = <&timing5>;
-			timing0: timing0 {
-				panel-name = "VGA";
-				clock-frequency = <25175000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing1: timing1 {
-				panel-name = "ETV570";
-				clock-frequency = <25175000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing2: timing2 {
-				panel-name = "ET0350";
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing3: timing3 {
-				panel-name = "ET0430";
-				clock-frequency = <9000000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing4: timing4 {
-				panel-name = "ET0500", "ET0700";
-				clock-frequency = <33260000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing5: timing5 {
-				panel-name = "ETQ570";
-				clock-frequency = <6400000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default", "gpio_mode";
-	pinctrl-0 = <&mac0_pins_a>;
-	pinctrl-1 = <&tx28_mac0_pins_gpio>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	/* not enabled by default */
-};
-
-&mxs_rtc {
-	status = "okay";
-};
-
-&ocotp {
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
-			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
-			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D00__GPIO_1_0
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
-		fsl,pinmux-ids = <
-			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
-			MX28_PAD_LCD_D01__LCD_D1
-			MX28_PAD_LCD_D02__LCD_D2
-			MX28_PAD_LCD_D03__LCD_D3
-			MX28_PAD_LCD_D04__LCD_D4
-			MX28_PAD_LCD_D05__LCD_D5
-			MX28_PAD_LCD_D06__LCD_D6
-			MX28_PAD_LCD_D07__LCD_D7
-			MX28_PAD_LCD_D08__LCD_D8
-			MX28_PAD_LCD_D09__LCD_D9
-			MX28_PAD_LCD_D10__LCD_D10
-			MX28_PAD_LCD_D11__LCD_D11
-			MX28_PAD_LCD_D12__LCD_D12
-			MX28_PAD_LCD_D13__LCD_D13
-			MX28_PAD_LCD_D14__LCD_D14
-			MX28_PAD_LCD_D15__LCD_D15
-			MX28_PAD_LCD_D16__LCD_D16
-			MX28_PAD_LCD_D17__LCD_D17
-			MX28_PAD_LCD_D18__LCD_D18
-			MX28_PAD_LCD_D19__LCD_D19
-			MX28_PAD_LCD_D20__LCD_D20
-			MX28_PAD_LCD_D21__LCD_D21
-			MX28_PAD_LCD_D22__LCD_D22
-			MX28_PAD_LCD_D23__LCD_D23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
-			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_MDC__GPIO_4_0
-			MX28_PAD_ENET0_MDIO__GPIO_4_1
-			MX28_PAD_ENET0_RX_EN__GPIO_4_2
-			MX28_PAD_ENET0_RXD0__GPIO_4_3
-			MX28_PAD_ENET0_RXD1__GPIO_4_4
-			MX28_PAD_ENET0_TX_EN__GPIO_4_6
-			MX28_PAD_ENET0_TXD0__GPIO_4_7
-			MX28_PAD_ENET0_TXD1__GPIO_4_8
-			MX28_PAD_ENET_CLK__GPIO_4_16
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_pca9554_pins: tx28-pca9554-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_PWM3__GPIO_3_28
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_tsc2007_pins: tx28-tsc2007-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-
-	tx28_usbphy0_pins: tx28-usbphy0-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
-			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_12mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_usbphy1_pins: tx28-usbphy1-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
-			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_12mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_b>;
-	fsl,saif-master;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default", "special";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		     &mmc0_cd_cfg
-		     &mmc0_sck_cfg>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssp3 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi3_pins_a>;
-	clock-frequency = <57600000>;
-	status = "okay";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <57600000>;
-	};
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	disable-over-current;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tx28_usbphy0_pins>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbphy1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tx28_usbphy1_pins>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/src/arm/imx28.dtsi b/src/arm/imx28.dtsi
deleted file mode 100644
index a95cc5358ff4..000000000000
--- a/src/arm/imx28.dtsi
+++ /dev/null
@@ -1,1193 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
-#include "imx28-pinfunc.h"
-
-/ {
-	interrupt-parent = <&icoll>;
-
-	aliases {
-		ethernet0 = &mac0;
-		ethernet1 = &mac1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-		saif0 = &saif0;
-		saif1 = &saif1;
-		serial0 = &auart0;
-		serial1 = &auart1;
-		serial2 = &auart2;
-		serial3 = &auart3;
-		serial4 = &auart4;
-		spi0 = &ssp1;
-		spi1 = &ssp2;
-		usbphy0 = &usbphy0;
-		usbphy1 = &usbphy1;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	apb@80000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80000000 0x80000>;
-		ranges;
-
-		apbh@80000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x3c900>;
-			ranges;
-
-			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx28-icoll", "fsl,icoll";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x80000000 0x2000>;
-			};
-
-			hsadc: hsadc@80002000 {
-				reg = <0x80002000 0x2000>;
-				interrupts = <13>;
-				dmas = <&dma_apbh 12>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dma_apbh: dma-apbh@80004000 {
-				compatible = "fsl,imx28-dma-apbh";
-				reg = <0x80004000 0x2000>;
-				interrupts = <82 83 84 85
-					      88 88 88 88
-					      88 88 88 88
-					      87 86 0 0>;
-				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-						  "hsadc", "lcdif", "empty", "empty";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 25>;
-			};
-
-			perfmon: perfmon@80006000 {
-				reg = <0x80006000 0x800>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			gpmi: gpmi-nand@8000c000 {
-				compatible = "fsl,imx28-gpmi-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
-				reg-names = "gpmi-nand", "bch";
-				interrupts = <41>;
-				interrupt-names = "bch";
-				clocks = <&clks 50>;
-				clock-names = "gpmi_io";
-				dmas = <&dma_apbh 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp0: ssp@80010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80010000 0x2000>;
-				interrupts = <96>;
-				clocks = <&clks 46>;
-				dmas = <&dma_apbh 0>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp1: ssp@80012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80012000 0x2000>;
-				interrupts = <97>;
-				clocks = <&clks 47>;
-				dmas = <&dma_apbh 1>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80014000 0x2000>;
-				interrupts = <98>;
-				clocks = <&clks 48>;
-				dmas = <&dma_apbh 2>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp3: ssp@80016000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80016000 0x2000>;
-				interrupts = <99>;
-				clocks = <&clks 49>;
-				dmas = <&dma_apbh 3>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			pinctrl: pinctrl@80018000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-pinctrl", "simple-bus";
-				reg = <0x80018000 0x2000>;
-
-				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <127>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <126>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <125>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <124>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <123>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				duart_pins_a: duart@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__DUART_RX
-						MX28_PAD_PWM1__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				duart_pins_b: duart@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_CTS__DUART_RX
-						MX28_PAD_AUART0_RTS__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				duart_4pins_a: duart-4pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_CTS__DUART_RX
-						MX28_PAD_AUART0_RTS__DUART_TX
-						MX28_PAD_AUART0_RX__DUART_CTS
-						MX28_PAD_AUART0_TX__DUART_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_a: gpmi-nand@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPMI_D0
-						MX28_PAD_GPMI_D01__GPMI_D1
-						MX28_PAD_GPMI_D02__GPMI_D2
-						MX28_PAD_GPMI_D03__GPMI_D3
-						MX28_PAD_GPMI_D04__GPMI_D4
-						MX28_PAD_GPMI_D05__GPMI_D5
-						MX28_PAD_GPMI_D06__GPMI_D6
-						MX28_PAD_GPMI_D07__GPMI_D7
-						MX28_PAD_GPMI_CE0N__GPMI_CE0N
-						MX28_PAD_GPMI_RDY0__GPMI_READY0
-						MX28_PAD_GPMI_RDN__GPMI_RDN
-						MX28_PAD_GPMI_WRN__GPMI_WRN
-						MX28_PAD_GPMI_ALE__GPMI_ALE
-						MX28_PAD_GPMI_CLE__GPMI_CLE
-						MX28_PAD_GPMI_RESETN__GPMI_RESETN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_status_cfg: gpmi-status-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPMI_RDN
-						MX28_PAD_GPMI_WRN__GPMI_WRN
-						MX28_PAD_GPMI_RESETN__GPMI_RESETN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-				};
-
-				auart0_pins_a: auart0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__AUART0_RX
-						MX28_PAD_AUART0_TX__AUART0_TX
-						MX28_PAD_AUART0_CTS__AUART0_CTS
-						MX28_PAD_AUART0_RTS__AUART0_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_2pins_a: auart0-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__AUART0_RX
-						MX28_PAD_AUART0_TX__AUART0_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_pins_a: auart1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__AUART1_RX
-						MX28_PAD_AUART1_TX__AUART1_TX
-						MX28_PAD_AUART1_CTS__AUART1_CTS
-						MX28_PAD_AUART1_RTS__AUART1_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_2pins_a: auart1-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__AUART1_RX
-						MX28_PAD_AUART1_TX__AUART1_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_2pins_a: auart2-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__AUART2_RX
-						MX28_PAD_SSP2_MOSI__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_2pins_b: auart2-2pins@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__AUART2_RX
-						MX28_PAD_AUART2_TX__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_pins_a: auart2-pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__AUART2_RX
-						MX28_PAD_AUART2_TX__AUART2_TX
-						MX28_PAD_AUART2_CTS__AUART2_CTS
-						MX28_PAD_AUART2_RTS__AUART2_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_pins_a: auart3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART3_RX__AUART3_RX
-						MX28_PAD_AUART3_TX__AUART3_TX
-						MX28_PAD_AUART3_CTS__AUART3_CTS
-						MX28_PAD_AUART3_RTS__AUART3_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_2pins_a: auart3-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_MISO__AUART3_RX
-						MX28_PAD_SSP2_SS0__AUART3_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_2pins_b: auart3-2pins@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART3_RX__AUART3_RX
-						MX28_PAD_AUART3_TX__AUART3_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart4_2pins_a: auart4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_SCK__AUART4_TX
-						MX28_PAD_SSP3_MOSI__AUART4_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_a: mac0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_MDC__ENET0_MDC
-						MX28_PAD_ENET0_MDIO__ENET0_MDIO
-						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
-						MX28_PAD_ENET0_RXD0__ENET0_RXD0
-						MX28_PAD_ENET0_RXD1__ENET0_RXD1
-						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
-						MX28_PAD_ENET0_TXD0__ENET0_TXD0
-						MX28_PAD_ENET0_TXD1__ENET0_TXD1
-						MX28_PAD_ENET_CLK__CLKCTRL_ENET
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mac1_pins_a: mac1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_CRS__ENET1_RX_EN
-						MX28_PAD_ENET0_RXD2__ENET1_RXD0
-						MX28_PAD_ENET0_RXD3__ENET1_RXD1
-						MX28_PAD_ENET0_COL__ENET1_TX_EN
-						MX28_PAD_ENET0_TXD2__ENET1_TXD0
-						MX28_PAD_ENET0_TXD3__ENET1_TXD1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_8bit_pins_a: mmc0-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA0__SSP0_D0
-						MX28_PAD_SSP0_DATA1__SSP0_D1
-						MX28_PAD_SSP0_DATA2__SSP0_D2
-						MX28_PAD_SSP0_DATA3__SSP0_D3
-						MX28_PAD_SSP0_DATA4__SSP0_D4
-						MX28_PAD_SSP0_DATA5__SSP0_D5
-						MX28_PAD_SSP0_DATA6__SSP0_D6
-						MX28_PAD_SSP0_DATA7__SSP0_D7
-						MX28_PAD_SSP0_CMD__SSP0_CMD
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_4bit_pins_a: mmc0-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA0__SSP0_D0
-						MX28_PAD_SSP0_DATA1__SSP0_D1
-						MX28_PAD_SSP0_DATA2__SSP0_D2
-						MX28_PAD_SSP0_DATA3__SSP0_D3
-						MX28_PAD_SSP0_CMD__SSP0_CMD
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_cd_cfg: mmc0-cd-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc0_sck_cfg: mmc0-sck-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_a: mmc2-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP1_SCK__SSP2_D1
-						MX28_PAD_SSP1_CMD__SSP2_D2
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_cd_cfg: mmc2-cd-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_sck_cfg: mmc2-sck-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2c0_pins_a: i2c0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__I2C0_SCL
-						MX28_PAD_I2C0_SDA__I2C0_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c0_pins_b: i2c0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__I2C0_SCL
-						MX28_PAD_AUART0_TX__I2C0_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c1_pins_a: i2c1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__I2C1_SCL
-						MX28_PAD_PWM1__I2C1_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif0_pins_a: saif0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
-						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
-						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
-						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif0_pins_b: saif0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
-						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
-						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif1_pins_a: saif1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				pwm0_pins_a: pwm0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__PWM_0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm2_pins_a: pwm2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM2__PWM_2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm3_pins_a: pwm3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__PWM_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm3_pins_b: pwm3@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__PWM_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm4_pins_a: pwm4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM4__PWM_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_24bit_pins_a: lcdif-24bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-						MX28_PAD_LCD_D18__LCD_D18
-						MX28_PAD_LCD_D19__LCD_D19
-						MX28_PAD_LCD_D20__LCD_D20
-						MX28_PAD_LCD_D21__LCD_D21
-						MX28_PAD_LCD_D22__LCD_D22
-						MX28_PAD_LCD_D23__LCD_D23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_a: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_16bit_pins_a: lcdif-16bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_sync_pins_a: lcdif-sync@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				can0_pins_a: can0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY2__CAN0_TX
-						MX28_PAD_GPMI_RDY3__CAN0_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				can1_pins_a: can1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE2N__CAN1_TX
-						MX28_PAD_GPMI_CE3N__CAN1_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi2_pins_a: spi2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__SSP2_SCK
-						MX28_PAD_SSP2_MOSI__SSP2_CMD
-						MX28_PAD_SSP2_MISO__SSP2_D0
-						MX28_PAD_SSP2_SS0__SSP2_D3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_a: spi3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__SSP3_D4
-						MX28_PAD_AUART2_TX__SSP3_D5
-						MX28_PAD_SSP3_SCK__SSP3_SCK
-						MX28_PAD_SSP3_MOSI__SSP3_CMD
-						MX28_PAD_SSP3_MISO__SSP3_D0
-						MX28_PAD_SSP3_SS0__SSP3_D3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_pins_a: usb0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_pins_b: usb0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb1_pins_a: usb1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_id_pins_a: usb0id@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RTS__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				usb0_id_pins_b: usb0id1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM2__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-			};
-
-			digctl: digctl@8001c000 {
-				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
-				reg = <0x8001c000 0x2000>;
-				interrupts = <89>;
-				status = "disabled";
-			};
-
-			etm: etm@80022000 {
-				reg = <0x80022000 0x2000>;
-				status = "disabled";
-			};
-
-			dma_apbx: dma-apbx@80024000 {
-				compatible = "fsl,imx28-dma-apbx";
-				reg = <0x80024000 0x2000>;
-				interrupts = <78 79 66 0
-					      80 81 68 69
-					      70 71 72 73
-					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
-						  "saif0", "saif1", "i2c0", "i2c1",
-						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 26>;
-			};
-
-			dcp: dcp@80028000 {
-				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
-				reg = <0x80028000 0x2000>;
-				interrupts = <52 53 54>;
-				status = "okay";
-			};
-
-			pxp: pxp@8002a000 {
-				reg = <0x8002a000 0x2000>;
-				interrupts = <39>;
-				status = "disabled";
-			};
-
-			ocotp: ocotp@8002c000 {
-				compatible = "fsl,ocotp";
-				reg = <0x8002c000 0x2000>;
-				status = "disabled";
-			};
-
-			axi-ahb@8002e000 {
-				reg = <0x8002e000 0x2000>;
-				status = "disabled";
-			};
-
-			lcdif: lcdif@80030000 {
-				compatible = "fsl,imx28-lcdif";
-				reg = <0x80030000 0x2000>;
-				interrupts = <38>;
-				clocks = <&clks 55>;
-				dmas = <&dma_apbh 13>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			can0: can@80032000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80032000 0x2000>;
-				interrupts = <8>;
-				clocks = <&clks 58>, <&clks 58>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can1: can@80034000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80034000 0x2000>;
-				interrupts = <9>;
-				clocks = <&clks 59>, <&clks 59>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			simdbg: simdbg@8003c000 {
-				reg = <0x8003c000 0x200>;
-				status = "disabled";
-			};
-
-			simgpmisel: simgpmisel@8003c200 {
-				reg = <0x8003c200 0x100>;
-				status = "disabled";
-			};
-
-			simsspsel: simsspsel@8003c300 {
-				reg = <0x8003c300 0x100>;
-				status = "disabled";
-			};
-
-			simmemsel: simmemsel@8003c400 {
-				reg = <0x8003c400 0x100>;
-				status = "disabled";
-			};
-
-			gpiomon: gpiomon@8003c500 {
-				reg = <0x8003c500 0x100>;
-				status = "disabled";
-			};
-
-			simenet: simenet@8003c700 {
-				reg = <0x8003c700 0x100>;
-				status = "disabled";
-			};
-
-			armjtag: armjtag@8003c800 {
-				reg = <0x8003c800 0x100>;
-				status = "disabled";
-			};
-		};
-
-		apbx@80040000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80040000 0x40000>;
-			ranges;
-
-			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
-				reg = <0x80040000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			saif0: saif@80042000 {
-				compatible = "fsl,imx28-saif";
-				reg = <0x80042000 0x2000>;
-				interrupts = <59>;
-				#clock-cells = <0>;
-				clocks = <&clks 53>;
-				dmas = <&dma_apbx 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			power: power@80044000 {
-				reg = <0x80044000 0x2000>;
-				status = "disabled";
-			};
-
-			saif1: saif@80046000 {
-				compatible = "fsl,imx28-saif";
-				reg = <0x80046000 0x2000>;
-				interrupts = <58>;
-				clocks = <&clks 54>;
-				dmas = <&dma_apbx 5>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			lradc: lradc@80050000 {
-				compatible = "fsl,imx28-lradc";
-				reg = <0x80050000 0x2000>;
-				interrupts = <10 14 15 16 17 18 19
-						20 21 22 23 24 25>;
-				status = "disabled";
-				clocks = <&clks 41>;
-				#io-channel-cells = <1>;
-			};
-
-			spdif: spdif@80054000 {
-				reg = <0x80054000 0x2000>;
-				interrupts = <45>;
-				dmas = <&dma_apbx 2>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			mxs_rtc: rtc@80056000 {
-				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x80056000 0x2000>;
-				interrupts = <29>;
-			};
-
-			i2c0: i2c@80058000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-i2c";
-				reg = <0x80058000 0x2000>;
-				interrupts = <111>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 6>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			i2c1: i2c@8005a000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-i2c";
-				reg = <0x8005a000 0x2000>;
-				interrupts = <110>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 7>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			pwm: pwm@80064000 {
-				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
-				reg = <0x80064000 0x2000>;
-				clocks = <&clks 44>;
-				#pwm-cells = <2>;
-				fsl,pwm-number = <8>;
-				status = "disabled";
-			};
-
-			timer: timrot@80068000 {
-				compatible = "fsl,imx28-timrot", "fsl,timrot";
-				reg = <0x80068000 0x2000>;
-				interrupts = <48 49 50 51>;
-				clocks = <&clks 26>;
-			};
-
-			auart0: serial@8006a000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006a000 0x2000>;
-				interrupts = <112>;
-				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart1: serial@8006c000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006c000 0x2000>;
-				interrupts = <113>;
-				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart2: serial@8006e000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006e000 0x2000>;
-				interrupts = <114>;
-				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart3: serial@80070000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x80070000 0x2000>;
-				interrupts = <115>;
-				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart4: serial@80072000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x80072000 0x2000>;
-				interrupts = <116>;
-				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			duart: serial@80074000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x80074000 0x1000>;
-				interrupts = <47>;
-				clocks = <&clks 45>, <&clks 26>;
-				clock-names = "uart", "apb_pclk";
-				status = "disabled";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
-				reg = <0x8007c000 0x2000>;
-				clocks = <&clks 62>;
-				status = "disabled";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
-				reg = <0x8007e000 0x2000>;
-				clocks = <&clks 63>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80080000 0x80000>;
-		ranges;
-
-		usb0: usb@80080000 {
-			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
-			reg = <0x80080000 0x10000>;
-			interrupts = <93>;
-			clocks = <&clks 60>;
-			fsl,usbphy = <&usbphy0>;
-			status = "disabled";
-		};
-
-		usb1: usb@80090000 {
-			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
-			reg = <0x80090000 0x10000>;
-			interrupts = <92>;
-			clocks = <&clks 61>;
-			fsl,usbphy = <&usbphy1>;
-			status = "disabled";
-		};
-
-		dflpt: dflpt@800c0000 {
-			reg = <0x800c0000 0x10000>;
-			status = "disabled";
-		};
-
-		mac0: ethernet@800f0000 {
-			compatible = "fsl,imx28-fec";
-			reg = <0x800f0000 0x4000>;
-			interrupts = <101>;
-			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
-			clock-names = "ipg", "ahb", "enet_out";
-			status = "disabled";
-		};
-
-		mac1: ethernet@800f4000 {
-			compatible = "fsl,imx28-fec";
-			reg = <0x800f4000 0x4000>;
-			interrupts = <102>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "disabled";
-		};
-
-		etn_switch: switch@800f8000 {
-			reg = <0x800f8000 0x8000>;
-			status = "disabled";
-		};
-	};
-
-	iio_hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&lradc 8>;
-	};
-};
diff --git a/src/arm/imx31-bug.dts b/src/arm/imx31-bug.dts
deleted file mode 100644
index 2424abfc9c7b..000000000000
--- a/src/arm/imx31-bug.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx31.dtsi"
-
-/ {
-	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "buglabs,imx31-bug", "fsl,imx31";
-
-	memory {
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&uart5 {
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
diff --git a/src/arm/imx31.dtsi b/src/arm/imx31.dtsi
deleted file mode 100644
index c34f82581248..000000000000
--- a/src/arm/imx31.dtsi
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1136";
-			device_type = "cpu";
-		};
-	};
-
-	avic: avic-interrupt-controller@60000000 {
-		compatible = "fsl,imx31-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		aips@43f00000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				interrupts = <45>;
-				clocks = <&clks 10>, <&clks 30>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks 10>, <&clks 31>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@43fb0000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb0000 0x4000>;
-				clocks = <&clks 10>, <&clks 49>;
-				clock-names = "ipg", "per";
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			uart5: serial@43fb4000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb4000 0x4000>;
-				interrupts = <47>;
-				clocks = <&clks 10>, <&clks 50>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		spba@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x100000>;
-			ranges;
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				interrupts = <18>;
-				clocks = <&clks 10>, <&clks 48>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iim: iim@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
-				reg = <0x5001c000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks 25>;
-			};
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <0 31 0x04 0 53 0x04>;
-				#clock-cells = <1>;
-			};
-		};
-
-		aips@53f00000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			gpt: timer@53f90000 {
-				compatible = "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks 10>, <&clks 22>;
-				clock-names = "ipg", "per";
-			};
-		};
-	};
-};
diff --git a/src/arm/imx35-eukrea-cpuimx35.dtsi b/src/arm/imx35-eukrea-cpuimx35.dtsi
deleted file mode 100644
index 9c2b715ab8bf..000000000000
--- a/src/arm/imx35-eukrea-cpuimx35.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,cpuimx35", "fsl,imx35";
-
-	memory {
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio3 2 0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <0x2 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x48>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
-				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
-				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX35_PAD_FEC_COL__FEC_COL		0x80000000
-				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
-				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
-				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
-				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
-				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
-				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
-				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
-				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
-				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
-				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
-				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
-				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
-			>;
-		};
-
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
deleted file mode 100644
index 75b036700d31..000000000000
--- a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx35-eukrea-cpuimx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bp1>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led1>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx35-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
-				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
-				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
-				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
-			>;
-		};
-
-		pinctrl_bp1: bp1grp {
-			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
-			>;
-		};
-
-		pinctrl_led1: led1grp {
-			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
-			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
-				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
-				MX35_PAD_RTS2__UART2_RTS		0x1c5
-				MX35_PAD_CTS2__UART2_CTS		0x1c5
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/src/arm/imx35-pdk.dts b/src/arm/imx35-pdk.dts
deleted file mode 100644
index 8d715523708f..000000000000
--- a/src/arm/imx35-pdk.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx35.dtsi"
-
-/ {
-	model = "Freescale i.MX35 Product Development Kit";
-	compatible = "fsl,imx35-pdk", "fsl,imx35";
-
-	memory {
-		reg = <0x80000000 0x8000000>,
-		      <0x90000000 0x8000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx35-pdk {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
diff --git a/src/arm/imx35-pinfunc.h b/src/arm/imx35-pinfunc.h
deleted file mode 100644
index 4911f2c405fa..000000000000
--- a/src/arm/imx35-pinfunc.h
+++ /dev/null
@@ -1,970 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX35_PINFUNC_H
-#define __DTS_IMX35_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX35_PAD_CAPTURE__GPT_CAPIN1				0x004 0x328 0x000 0x0 0x0
-#define MX35_PAD_CAPTURE__GPT_CMPOUT2				0x004 0x328 0x000 0x1 0x0
-#define MX35_PAD_CAPTURE__CSPI2_SS1				0x004 0x328 0x7f4 0x2 0x0
-#define MX35_PAD_CAPTURE__EPIT1_EPITO				0x004 0x328 0x000 0x3 0x0
-#define MX35_PAD_CAPTURE__CCM_CLK32K				0x004 0x328 0x7d0 0x4 0x0
-#define MX35_PAD_CAPTURE__GPIO1_4				0x004 0x328 0x850 0x5 0x0
-#define MX35_PAD_COMPARE__GPT_CMPOUT1				0x008 0x32c 0x000 0x0 0x0
-#define MX35_PAD_COMPARE__GPT_CAPIN2				0x008 0x32c 0x000 0x1 0x0
-#define MX35_PAD_COMPARE__GPT_CMPOUT3				0x008 0x32c 0x000 0x2 0x0
-#define MX35_PAD_COMPARE__EPIT2_EPITO				0x008 0x32c 0x000 0x3 0x0
-#define MX35_PAD_COMPARE__GPIO1_5				0x008 0x32c 0x854 0x5 0x0
-#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				0x008 0x32c 0x000 0x7 0x0
-#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				0x00c 0x330 0x000 0x0 0x0
-#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			0x00c 0x330 0x000 0x3 0x0
-#define MX35_PAD_WDOG_RST__GPIO1_6				0x00c 0x330 0x858 0x5 0x0
-#define MX35_PAD_GPIO1_0__GPIO1_0				0x010 0x334 0x82c 0x0 0x0
-#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				0x010 0x334 0x7d4 0x1 0x0
-#define MX35_PAD_GPIO1_0__OWIRE_LINE				0x010 0x334 0x990 0x2 0x0
-#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				0x010 0x334 0x000 0x7 0x0
-#define MX35_PAD_GPIO1_1__GPIO1_1				0x014 0x338 0x838 0x0 0x0
-#define MX35_PAD_GPIO1_1__PWM_PWMO				0x014 0x338 0x000 0x2 0x0
-#define MX35_PAD_GPIO1_1__CSPI1_SS2				0x014 0x338 0x7d8 0x3 0x0
-#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			0x014 0x338 0x000 0x6 0x0
-#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				0x014 0x338 0x000 0x7 0x0
-#define MX35_PAD_GPIO2_0__GPIO2_0				0x018 0x33c 0x868 0x0 0x0
-#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			0x018 0x33c 0x000 0x1 0x0
-#define MX35_PAD_GPIO3_0__GPIO3_0				0x01c 0x340 0x8e8 0x0 0x0
-#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			0x01c 0x340 0x000 0x1 0x0
-#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			0x000 0x344 0x000 0x0 0x0
-#define MX35_PAD_POR_B__CCM_POR_B				0x000 0x348 0x000 0x0 0x0
-#define MX35_PAD_CLKO__CCM_CLKO					0x020 0x34c 0x000 0x0 0x0
-#define MX35_PAD_CLKO__GPIO1_8					0x020 0x34c 0x860 0x5 0x0
-#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			0x000 0x350 0x000 0x0 0x0
-#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			0x000 0x354 0x000 0x0 0x0
-#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			0x000 0x358 0x000 0x0 0x0
-#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			0x000 0x35c 0x000 0x0 0x0
-#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		0x000 0x360 0x000 0x0 0x0
-#define MX35_PAD_VSTBY__CCM_VSTBY				0x024 0x364 0x000 0x0 0x0
-#define MX35_PAD_VSTBY__GPIO1_7					0x024 0x364 0x85c 0x5 0x0
-#define MX35_PAD_A0__EMI_EIM_DA_L_0				0x028 0x368 0x000 0x0 0x0
-#define MX35_PAD_A1__EMI_EIM_DA_L_1				0x02c 0x36c 0x000 0x0 0x0
-#define MX35_PAD_A2__EMI_EIM_DA_L_2				0x030 0x370 0x000 0x0 0x0
-#define MX35_PAD_A3__EMI_EIM_DA_L_3				0x034 0x374 0x000 0x0 0x0
-#define MX35_PAD_A4__EMI_EIM_DA_L_4				0x038 0x378 0x000 0x0 0x0
-#define MX35_PAD_A5__EMI_EIM_DA_L_5				0x03c 0x37c 0x000 0x0 0x0
-#define MX35_PAD_A6__EMI_EIM_DA_L_6				0x040 0x380 0x000 0x0 0x0
-#define MX35_PAD_A7__EMI_EIM_DA_L_7				0x044 0x384 0x000 0x0 0x0
-#define MX35_PAD_A8__EMI_EIM_DA_H_8				0x048 0x388 0x000 0x0 0x0
-#define MX35_PAD_A9__EMI_EIM_DA_H_9				0x04c 0x38c 0x000 0x0 0x0
-#define MX35_PAD_A10__EMI_EIM_DA_H_10				0x050 0x390 0x000 0x0 0x0
-#define MX35_PAD_MA10__EMI_MA10					0x054 0x394 0x000 0x0 0x0
-#define MX35_PAD_A11__EMI_EIM_DA_H_11				0x058 0x398 0x000 0x0 0x0
-#define MX35_PAD_A12__EMI_EIM_DA_H_12				0x05c 0x39c 0x000 0x0 0x0
-#define MX35_PAD_A13__EMI_EIM_DA_H_13				0x060 0x3a0 0x000 0x0 0x0
-#define MX35_PAD_A14__EMI_EIM_DA_H2_14				0x064 0x3a4 0x000 0x0 0x0
-#define MX35_PAD_A15__EMI_EIM_DA_H2_15				0x068 0x3a8 0x000 0x0 0x0
-#define MX35_PAD_A16__EMI_EIM_A_16				0x06c 0x3ac 0x000 0x0 0x0
-#define MX35_PAD_A17__EMI_EIM_A_17				0x070 0x3b0 0x000 0x0 0x0
-#define MX35_PAD_A18__EMI_EIM_A_18				0x074 0x3b4 0x000 0x0 0x0
-#define MX35_PAD_A19__EMI_EIM_A_19				0x078 0x3b8 0x000 0x0 0x0
-#define MX35_PAD_A20__EMI_EIM_A_20				0x07c 0x3bc 0x000 0x0 0x0
-#define MX35_PAD_A21__EMI_EIM_A_21				0x080 0x3c0 0x000 0x0 0x0
-#define MX35_PAD_A22__EMI_EIM_A_22				0x084 0x3c4 0x000 0x0 0x0
-#define MX35_PAD_A23__EMI_EIM_A_23				0x088 0x3c8 0x000 0x0 0x0
-#define MX35_PAD_A24__EMI_EIM_A_24				0x08c 0x3cc 0x000 0x0 0x0
-#define MX35_PAD_A25__EMI_EIM_A_25				0x090 0x3d0 0x000 0x0 0x0
-#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				0x000 0x3d4 0x000 0x0 0x0
-#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				0x000 0x3d8 0x000 0x0 0x0
-#define MX35_PAD_SD0__EMI_DRAM_D_0				0x000 0x3dc 0x000 0x0 0x0
-#define MX35_PAD_SD1__EMI_DRAM_D_1				0x000 0x3e0 0x000 0x0 0x0
-#define MX35_PAD_SD2__EMI_DRAM_D_2				0x000 0x3e4 0x000 0x0 0x0
-#define MX35_PAD_SD3__EMI_DRAM_D_3				0x000 0x3e8 0x000 0x0 0x0
-#define MX35_PAD_SD4__EMI_DRAM_D_4				0x000 0x3ec 0x000 0x0 0x0
-#define MX35_PAD_SD5__EMI_DRAM_D_5				0x000 0x3f0 0x000 0x0 0x0
-#define MX35_PAD_SD6__EMI_DRAM_D_6				0x000 0x3f4 0x000 0x0 0x0
-#define MX35_PAD_SD7__EMI_DRAM_D_7				0x000 0x3f8 0x000 0x0 0x0
-#define MX35_PAD_SD8__EMI_DRAM_D_8				0x000 0x3fc 0x000 0x0 0x0
-#define MX35_PAD_SD9__EMI_DRAM_D_9				0x000 0x400 0x000 0x0 0x0
-#define MX35_PAD_SD10__EMI_DRAM_D_10				0x000 0x404 0x000 0x0 0x0
-#define MX35_PAD_SD11__EMI_DRAM_D_11				0x000 0x408 0x000 0x0 0x0
-#define MX35_PAD_SD12__EMI_DRAM_D_12				0x000 0x40c 0x000 0x0 0x0
-#define MX35_PAD_SD13__EMI_DRAM_D_13				0x000 0x410 0x000 0x0 0x0
-#define MX35_PAD_SD14__EMI_DRAM_D_14				0x000 0x414 0x000 0x0 0x0
-#define MX35_PAD_SD15__EMI_DRAM_D_15				0x000 0x418 0x000 0x0 0x0
-#define MX35_PAD_SD16__EMI_DRAM_D_16				0x000 0x41c 0x000 0x0 0x0
-#define MX35_PAD_SD17__EMI_DRAM_D_17				0x000 0x420 0x000 0x0 0x0
-#define MX35_PAD_SD18__EMI_DRAM_D_18				0x000 0x424 0x000 0x0 0x0
-#define MX35_PAD_SD19__EMI_DRAM_D_19				0x000 0x428 0x000 0x0 0x0
-#define MX35_PAD_SD20__EMI_DRAM_D_20				0x000 0x42c 0x000 0x0 0x0
-#define MX35_PAD_SD21__EMI_DRAM_D_21				0x000 0x430 0x000 0x0 0x0
-#define MX35_PAD_SD22__EMI_DRAM_D_22				0x000 0x434 0x000 0x0 0x0
-#define MX35_PAD_SD23__EMI_DRAM_D_23				0x000 0x438 0x000 0x0 0x0
-#define MX35_PAD_SD24__EMI_DRAM_D_24				0x000 0x43c 0x000 0x0 0x0
-#define MX35_PAD_SD25__EMI_DRAM_D_25				0x000 0x440 0x000 0x0 0x0
-#define MX35_PAD_SD26__EMI_DRAM_D_26				0x000 0x444 0x000 0x0 0x0
-#define MX35_PAD_SD27__EMI_DRAM_D_27				0x000 0x448 0x000 0x0 0x0
-#define MX35_PAD_SD28__EMI_DRAM_D_28				0x000 0x44c 0x000 0x0 0x0
-#define MX35_PAD_SD29__EMI_DRAM_D_29				0x000 0x450 0x000 0x0 0x0
-#define MX35_PAD_SD30__EMI_DRAM_D_30				0x000 0x454 0x000 0x0 0x0
-#define MX35_PAD_SD31__EMI_DRAM_D_31				0x000 0x458 0x000 0x0 0x0
-#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				0x000 0x45c 0x000 0x0 0x0
-#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				0x000 0x460 0x000 0x0 0x0
-#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				0x000 0x464 0x000 0x0 0x0
-#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				0x000 0x468 0x000 0x0 0x0
-#define MX35_PAD_EB0__EMI_EIM_EB0_B				0x094 0x46c 0x000 0x0 0x0
-#define MX35_PAD_EB1__EMI_EIM_EB1_B				0x098 0x470 0x000 0x0 0x0
-#define MX35_PAD_OE__EMI_EIM_OE					0x09c 0x474 0x000 0x0 0x0
-#define MX35_PAD_CS0__EMI_EIM_CS0				0x0a0 0x478 0x000 0x0 0x0
-#define MX35_PAD_CS1__EMI_EIM_CS1				0x0a4 0x47c 0x000 0x0 0x0
-#define MX35_PAD_CS1__EMI_NANDF_CE3				0x0a4 0x47c 0x000 0x3 0x0
-#define MX35_PAD_CS2__EMI_EIM_CS2				0x0a8 0x480 0x000 0x0 0x0
-#define MX35_PAD_CS3__EMI_EIM_CS3				0x0ac 0x484 0x000 0x0 0x0
-#define MX35_PAD_CS4__EMI_EIM_CS4				0x0b0 0x488 0x000 0x0 0x0
-#define MX35_PAD_CS4__EMI_DTACK_B				0x0b0 0x488 0x800 0x1 0x0
-#define MX35_PAD_CS4__EMI_NANDF_CE1				0x0b0 0x488 0x000 0x3 0x0
-#define MX35_PAD_CS4__GPIO1_20					0x0b0 0x488 0x83c 0x5 0x0
-#define MX35_PAD_CS5__EMI_EIM_CS5				0x0b4 0x48c 0x000 0x0 0x0
-#define MX35_PAD_CS5__CSPI2_SS2					0x0b4 0x48c 0x7f8 0x1 0x0
-#define MX35_PAD_CS5__CSPI1_SS2					0x0b4 0x48c 0x7d8 0x2 0x1
-#define MX35_PAD_CS5__EMI_NANDF_CE2				0x0b4 0x48c 0x000 0x3 0x0
-#define MX35_PAD_CS5__GPIO1_21					0x0b4 0x48c 0x840 0x5 0x0
-#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				0x0b8 0x490 0x000 0x0 0x0
-#define MX35_PAD_NF_CE0__GPIO1_22				0x0b8 0x490 0x844 0x5 0x0
-#define MX35_PAD_ECB__EMI_EIM_ECB				0x000 0x494 0x000 0x0 0x0
-#define MX35_PAD_LBA__EMI_EIM_LBA				0x0bc 0x498 0x000 0x0 0x0
-#define MX35_PAD_BCLK__EMI_EIM_BCLK				0x0c0 0x49c 0x000 0x0 0x0
-#define MX35_PAD_RW__EMI_EIM_RW					0x0c4 0x4a0 0x000 0x0 0x0
-#define MX35_PAD_RAS__EMI_DRAM_RAS				0x000 0x4a4 0x000 0x0 0x0
-#define MX35_PAD_CAS__EMI_DRAM_CAS				0x000 0x4a8 0x000 0x0 0x0
-#define MX35_PAD_SDWE__EMI_DRAM_SDWE				0x000 0x4ac 0x000 0x0 0x0
-#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			0x000 0x4b0 0x000 0x0 0x0
-#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			0x000 0x4b4 0x000 0x0 0x0
-#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				0x000 0x4b8 0x000 0x0 0x0
-#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				0x000 0x4bc 0x000 0x0 0x0
-#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				0x000 0x4c0 0x000 0x0 0x0
-#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				0x000 0x4c4 0x000 0x0 0x0
-#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				0x000 0x4c8 0x000 0x0 0x0
-#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				0x0c8 0x4cc 0x000 0x0 0x0
-#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			0x0c8 0x4cc 0x9d8 0x1 0x0
-#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			0x0c8 0x4cc 0x924 0x2 0x0
-#define MX35_PAD_NFWE_B__GPIO2_18				0x0c8 0x4cc 0x88c 0x5 0x0
-#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			0x0c8 0x4cc 0x000 0x7 0x0
-#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				0x0cc 0x4d0 0x000 0x0 0x0
-#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			0x0cc 0x4d0 0x9ec 0x1 0x0
-#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				0x0cc 0x4d0 0x000 0x2 0x0
-#define MX35_PAD_NFRE_B__GPIO2_19				0x0cc 0x4d0 0x890 0x5 0x0
-#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			0x0cc 0x4d0 0x000 0x7 0x0
-#define MX35_PAD_NFALE__EMI_NANDF_ALE				0x0d0 0x4d4 0x000 0x0 0x0
-#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			0x0d0 0x4d4 0x000 0x1 0x0
-#define MX35_PAD_NFALE__IPU_DISPB_CS0				0x0d0 0x4d4 0x000 0x2 0x0
-#define MX35_PAD_NFALE__GPIO2_20				0x0d0 0x4d4 0x898 0x5 0x0
-#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			0x0d0 0x4d4 0x000 0x7 0x0
-#define MX35_PAD_NFCLE__EMI_NANDF_CLE				0x0d4 0x4d8 0x000 0x0 0x0
-#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			0x0d4 0x4d8 0x9f0 0x1 0x0
-#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			0x0d4 0x4d8 0x000 0x2 0x0
-#define MX35_PAD_NFCLE__GPIO2_21				0x0d4 0x4d8 0x89c 0x5 0x0
-#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			0x0d4 0x4d8 0x000 0x7 0x0
-#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				0x0d8 0x4dc 0x000 0x0 0x0
-#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			0x0d8 0x4dc 0x9e8 0x1 0x0
-#define MX35_PAD_NFWP_B__IPU_DISPB_WR				0x0d8 0x4dc 0x000 0x2 0x0
-#define MX35_PAD_NFWP_B__GPIO2_22				0x0d8 0x4dc 0x8a0 0x5 0x0
-#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			0x0d8 0x4dc 0x000 0x7 0x0
-#define MX35_PAD_NFRB__EMI_NANDF_RB				0x0dc 0x4e0 0x000 0x0 0x0
-#define MX35_PAD_NFRB__IPU_DISPB_RD				0x0dc 0x4e0 0x000 0x2 0x0
-#define MX35_PAD_NFRB__GPIO2_23					0x0dc 0x4e0 0x8a4 0x5 0x0
-#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				0x0dc 0x4e0 0x000 0x7 0x0
-#define MX35_PAD_D15__EMI_EIM_D_15				0x000 0x4e4 0x000 0x0 0x0
-#define MX35_PAD_D14__EMI_EIM_D_14				0x000 0x4e8 0x000 0x0 0x0
-#define MX35_PAD_D13__EMI_EIM_D_13				0x000 0x4ec 0x000 0x0 0x0
-#define MX35_PAD_D12__EMI_EIM_D_12				0x000 0x4f0 0x000 0x0 0x0
-#define MX35_PAD_D11__EMI_EIM_D_11				0x000 0x4f4 0x000 0x0 0x0
-#define MX35_PAD_D10__EMI_EIM_D_10				0x000 0x4f8 0x000 0x0 0x0
-#define MX35_PAD_D9__EMI_EIM_D_9				0x000 0x4fc 0x000 0x0 0x0
-#define MX35_PAD_D8__EMI_EIM_D_8				0x000 0x500 0x000 0x0 0x0
-#define MX35_PAD_D7__EMI_EIM_D_7				0x000 0x504 0x000 0x0 0x0
-#define MX35_PAD_D6__EMI_EIM_D_6				0x000 0x508 0x000 0x0 0x0
-#define MX35_PAD_D5__EMI_EIM_D_5				0x000 0x50c 0x000 0x0 0x0
-#define MX35_PAD_D4__EMI_EIM_D_4				0x000 0x510 0x000 0x0 0x0
-#define MX35_PAD_D3__EMI_EIM_D_3				0x000 0x514 0x000 0x0 0x0
-#define MX35_PAD_D2__EMI_EIM_D_2				0x000 0x518 0x000 0x0 0x0
-#define MX35_PAD_D1__EMI_EIM_D_1				0x000 0x51c 0x000 0x0 0x0
-#define MX35_PAD_D0__EMI_EIM_D_0				0x000 0x520 0x000 0x0 0x0
-#define MX35_PAD_CSI_D8__IPU_CSI_D_8				0x0e0 0x524 0x000 0x0 0x0
-#define MX35_PAD_CSI_D8__KPP_COL_0				0x0e0 0x524 0x950 0x1 0x0
-#define MX35_PAD_CSI_D8__GPIO1_20				0x0e0 0x524 0x83c 0x5 0x1
-#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			0x0e0 0x524 0x000 0x7 0x0
-#define MX35_PAD_CSI_D9__IPU_CSI_D_9				0x0e4 0x528 0x000 0x0 0x0
-#define MX35_PAD_CSI_D9__KPP_COL_1				0x0e4 0x528 0x954 0x1 0x0
-#define MX35_PAD_CSI_D9__GPIO1_21				0x0e4 0x528 0x840 0x5 0x1
-#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			0x0e4 0x528 0x000 0x7 0x0
-#define MX35_PAD_CSI_D10__IPU_CSI_D_10				0x0e8 0x52c 0x000 0x0 0x0
-#define MX35_PAD_CSI_D10__KPP_COL_2				0x0e8 0x52c 0x958 0x1 0x0
-#define MX35_PAD_CSI_D10__GPIO1_22				0x0e8 0x52c 0x844 0x5 0x1
-#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			0x0e8 0x52c 0x000 0x7 0x0
-#define MX35_PAD_CSI_D11__IPU_CSI_D_11				0x0ec 0x530 0x000 0x0 0x0
-#define MX35_PAD_CSI_D11__KPP_COL_3				0x0ec 0x530 0x95c 0x1 0x0
-#define MX35_PAD_CSI_D11__GPIO1_23				0x0ec 0x530 0x000 0x5 0x0
-#define MX35_PAD_CSI_D12__IPU_CSI_D_12				0x0f0 0x534 0x000 0x0 0x0
-#define MX35_PAD_CSI_D12__KPP_ROW_0				0x0f0 0x534 0x970 0x1 0x0
-#define MX35_PAD_CSI_D12__GPIO1_24				0x0f0 0x534 0x000 0x5 0x0
-#define MX35_PAD_CSI_D13__IPU_CSI_D_13				0x0f4 0x538 0x000 0x0 0x0
-#define MX35_PAD_CSI_D13__KPP_ROW_1				0x0f4 0x538 0x974 0x1 0x0
-#define MX35_PAD_CSI_D13__GPIO1_25				0x0f4 0x538 0x000 0x5 0x0
-#define MX35_PAD_CSI_D14__IPU_CSI_D_14				0x0f8 0x53c 0x000 0x0 0x0
-#define MX35_PAD_CSI_D14__KPP_ROW_2				0x0f8 0x53c 0x978 0x1 0x0
-#define MX35_PAD_CSI_D14__GPIO1_26				0x0f8 0x53c 0x000 0x5 0x0
-#define MX35_PAD_CSI_D15__IPU_CSI_D_15				0x0fc 0x540 0x97c 0x0 0x0
-#define MX35_PAD_CSI_D15__KPP_ROW_3				0x0fc 0x540 0x000 0x1 0x0
-#define MX35_PAD_CSI_D15__GPIO1_27				0x0fc 0x540 0x000 0x5 0x0
-#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				0x100 0x544 0x000 0x0 0x0
-#define MX35_PAD_CSI_MCLK__GPIO1_28				0x100 0x544 0x000 0x5 0x0
-#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			0x104 0x548 0x000 0x0 0x0
-#define MX35_PAD_CSI_VSYNC__GPIO1_29				0x104 0x548 0x000 0x5 0x0
-#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			0x108 0x54c 0x000 0x0 0x0
-#define MX35_PAD_CSI_HSYNC__GPIO1_30				0x108 0x54c 0x000 0x5 0x0
-#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			0x10c 0x550 0x000 0x0 0x0
-#define MX35_PAD_CSI_PIXCLK__GPIO1_31				0x10c 0x550 0x000 0x5 0x0
-#define MX35_PAD_I2C1_CLK__I2C1_SCL				0x110 0x554 0x000 0x0 0x0
-#define MX35_PAD_I2C1_CLK__GPIO2_24				0x110 0x554 0x8a8 0x5 0x0
-#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			0x110 0x554 0x000 0x6 0x0
-#define MX35_PAD_I2C1_DAT__I2C1_SDA				0x114 0x558 0x000 0x0 0x0
-#define MX35_PAD_I2C1_DAT__GPIO2_25				0x114 0x558 0x8ac 0x5 0x0
-#define MX35_PAD_I2C2_CLK__I2C2_SCL				0x118 0x55c 0x000 0x0 0x0
-#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				0x118 0x55c 0x000 0x1 0x0
-#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			0x118 0x55c 0x000 0x2 0x0
-#define MX35_PAD_I2C2_CLK__GPIO2_26				0x118 0x55c 0x8b0 0x5 0x0
-#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		0x118 0x55c 0x000 0x6 0x0
-#define MX35_PAD_I2C2_DAT__I2C2_SDA				0x11c 0x560 0x000 0x0 0x0
-#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				0x11c 0x560 0x7c8 0x1 0x0
-#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			0x11c 0x560 0x9f4 0x2 0x0
-#define MX35_PAD_I2C2_DAT__GPIO2_27				0x11c 0x560 0x8b4 0x5 0x0
-#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		0x11c 0x560 0x000 0x6 0x0
-#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				0x120 0x564 0x000 0x0 0x0
-#define MX35_PAD_STXD4__GPIO2_28				0x120 0x564 0x8b8 0x5 0x0
-#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		0x120 0x564 0x000 0x7 0x0
-#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				0x124 0x568 0x000 0x0 0x0
-#define MX35_PAD_SRXD4__GPIO2_29				0x124 0x568 0x8bc 0x5 0x0
-#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		0x124 0x568 0x000 0x7 0x0
-#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				0x128 0x56c 0x000 0x0 0x0
-#define MX35_PAD_SCK4__GPIO2_30					0x128 0x56c 0x8c4 0x5 0x0
-#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			0x128 0x56c 0x000 0x7 0x0
-#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			0x12c 0x570 0x000 0x0 0x0
-#define MX35_PAD_STXFS4__GPIO2_31				0x12c 0x570 0x8c8 0x5 0x0
-#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		0x12c 0x570 0x000 0x7 0x0
-#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				0x130 0x574 0x000 0x0 0x0
-#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			0x130 0x574 0x000 0x1 0x0
-#define MX35_PAD_STXD5__CSPI2_MOSI				0x130 0x574 0x7ec 0x2 0x0
-#define MX35_PAD_STXD5__GPIO1_0					0x130 0x574 0x82c 0x5 0x1
-#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		0x130 0x574 0x000 0x7 0x0
-#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				0x134 0x578 0x000 0x0 0x0
-#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				0x134 0x578 0x998 0x1 0x0
-#define MX35_PAD_SRXD5__CSPI2_MISO				0x134 0x578 0x7e8 0x2 0x0
-#define MX35_PAD_SRXD5__GPIO1_1					0x134 0x578 0x838 0x5 0x1
-#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		0x134 0x578 0x000 0x7 0x0
-#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				0x138 0x57c 0x000 0x0 0x0
-#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			0x138 0x57c 0x994 0x1 0x0
-#define MX35_PAD_SCK5__CSPI2_SCLK				0x138 0x57c 0x7e0 0x2 0x0
-#define MX35_PAD_SCK5__GPIO1_2					0x138 0x57c 0x848 0x5 0x0
-#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			0x138 0x57c 0x000 0x7 0x0
-#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			0x13c 0x580 0x000 0x0 0x0
-#define MX35_PAD_STXFS5__CSPI2_RDY				0x13c 0x580 0x7e4 0x2 0x0
-#define MX35_PAD_STXFS5__GPIO1_3				0x13c 0x580 0x84c 0x5 0x0
-#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		0x13c 0x580 0x000 0x7 0x0
-#define MX35_PAD_SCKR__ESAI_SCKR				0x140 0x584 0x000 0x0 0x0
-#define MX35_PAD_SCKR__GPIO1_4					0x140 0x584 0x850 0x5 0x1
-#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			0x140 0x584 0x000 0x7 0x0
-#define MX35_PAD_FSR__ESAI_FSR					0x144 0x588 0x000 0x0 0x0
-#define MX35_PAD_FSR__GPIO1_5					0x144 0x588 0x854 0x5 0x1
-#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			0x144 0x588 0x000 0x7 0x0
-#define MX35_PAD_HCKR__ESAI_HCKR				0x148 0x58c 0x000 0x0 0x0
-#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				0x148 0x58c 0x000 0x1 0x0
-#define MX35_PAD_HCKR__CSPI2_SS0				0x148 0x58c 0x7f0 0x2 0x0
-#define MX35_PAD_HCKR__IPU_FLASH_STROBE				0x148 0x58c 0x000 0x3 0x0
-#define MX35_PAD_HCKR__GPIO1_6					0x148 0x58c 0x858 0x5 0x1
-#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			0x148 0x58c 0x000 0x7 0x0
-#define MX35_PAD_SCKT__ESAI_SCKT				0x14c 0x590 0x000 0x0 0x0
-#define MX35_PAD_SCKT__GPIO1_7					0x14c 0x590 0x85c 0x5 0x1
-#define MX35_PAD_SCKT__IPU_CSI_D_0				0x14c 0x590 0x930 0x6 0x0
-#define MX35_PAD_SCKT__KPP_ROW_2				0x14c 0x590 0x978 0x7 0x1
-#define MX35_PAD_FST__ESAI_FST					0x150 0x594 0x000 0x0 0x0
-#define MX35_PAD_FST__GPIO1_8					0x150 0x594 0x860 0x5 0x1
-#define MX35_PAD_FST__IPU_CSI_D_1				0x150 0x594 0x934 0x6 0x0
-#define MX35_PAD_FST__KPP_ROW_3					0x150 0x594 0x97c 0x7 0x1
-#define MX35_PAD_HCKT__ESAI_HCKT				0x154 0x598 0x000 0x0 0x0
-#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				0x154 0x598 0x7a8 0x1 0x0
-#define MX35_PAD_HCKT__GPIO1_9					0x154 0x598 0x864 0x5 0x0
-#define MX35_PAD_HCKT__IPU_CSI_D_2				0x154 0x598 0x938 0x6 0x0
-#define MX35_PAD_HCKT__KPP_COL_3				0x154 0x598 0x95c 0x7 0x1
-#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				0x158 0x59c 0x000 0x0 0x0
-#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			0x158 0x59c 0x000 0x1 0x0
-#define MX35_PAD_TX5_RX0__CSPI2_SS2				0x158 0x59c 0x7f8 0x2 0x1
-#define MX35_PAD_TX5_RX0__CAN2_TXCAN				0x158 0x59c 0x000 0x3 0x0
-#define MX35_PAD_TX5_RX0__UART2_DTR				0x158 0x59c 0x000 0x4 0x0
-#define MX35_PAD_TX5_RX0__GPIO1_10				0x158 0x59c 0x830 0x5 0x0
-#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		0x158 0x59c 0x000 0x7 0x0
-#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				0x15c 0x5a0 0x000 0x0 0x0
-#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			0x15c 0x5a0 0x000 0x1 0x0
-#define MX35_PAD_TX4_RX1__CSPI2_SS3				0x15c 0x5a0 0x7fc 0x2 0x0
-#define MX35_PAD_TX4_RX1__CAN2_RXCAN				0x15c 0x5a0 0x7cc 0x3 0x0
-#define MX35_PAD_TX4_RX1__UART2_DSR				0x15c 0x5a0 0x000 0x4 0x0
-#define MX35_PAD_TX4_RX1__GPIO1_11				0x15c 0x5a0 0x834 0x5 0x0
-#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				0x15c 0x5a0 0x93c 0x6 0x0
-#define MX35_PAD_TX4_RX1__KPP_ROW_0				0x15c 0x5a0 0x970 0x7 0x1
-#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				0x160 0x5a4 0x000 0x0 0x0
-#define MX35_PAD_TX3_RX2__I2C3_SCL				0x160 0x5a4 0x91c 0x1 0x0
-#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				0x160 0x5a4 0x000 0x3 0x0
-#define MX35_PAD_TX3_RX2__GPIO1_12				0x160 0x5a4 0x000 0x5 0x0
-#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				0x160 0x5a4 0x940 0x6 0x0
-#define MX35_PAD_TX3_RX2__KPP_ROW_1				0x160 0x5a4 0x974 0x7 0x1
-#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				0x164 0x5a8 0x000 0x0 0x0
-#define MX35_PAD_TX2_RX3__I2C3_SDA				0x164 0x5a8 0x920 0x1 0x0
-#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				0x164 0x5a8 0x000 0x3 0x0
-#define MX35_PAD_TX2_RX3__GPIO1_13				0x164 0x5a8 0x000 0x5 0x0
-#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				0x164 0x5a8 0x944 0x6 0x0
-#define MX35_PAD_TX2_RX3__KPP_COL_0				0x164 0x5a8 0x950 0x7 0x1
-#define MX35_PAD_TX1__ESAI_TX1					0x168 0x5ac 0x000 0x0 0x0
-#define MX35_PAD_TX1__CCM_PMIC_RDY				0x168 0x5ac 0x7d4 0x1 0x1
-#define MX35_PAD_TX1__CSPI1_SS2					0x168 0x5ac 0x7d8 0x2 0x2
-#define MX35_PAD_TX1__EMI_NANDF_CE3				0x168 0x5ac 0x000 0x3 0x0
-#define MX35_PAD_TX1__UART2_RI					0x168 0x5ac 0x000 0x4 0x0
-#define MX35_PAD_TX1__GPIO1_14					0x168 0x5ac 0x000 0x5 0x0
-#define MX35_PAD_TX1__IPU_CSI_D_6				0x168 0x5ac 0x948 0x6 0x0
-#define MX35_PAD_TX1__KPP_COL_1					0x168 0x5ac 0x954 0x7 0x1
-#define MX35_PAD_TX0__ESAI_TX0					0x16c 0x5b0 0x000 0x0 0x0
-#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			0x16c 0x5b0 0x994 0x1 0x1
-#define MX35_PAD_TX0__CSPI1_SS3					0x16c 0x5b0 0x7dc 0x2 0x0
-#define MX35_PAD_TX0__EMI_DTACK_B				0x16c 0x5b0 0x800 0x3 0x1
-#define MX35_PAD_TX0__UART2_DCD					0x16c 0x5b0 0x000 0x4 0x0
-#define MX35_PAD_TX0__GPIO1_15					0x16c 0x5b0 0x000 0x5 0x0
-#define MX35_PAD_TX0__IPU_CSI_D_7				0x16c 0x5b0 0x94c 0x6 0x0
-#define MX35_PAD_TX0__KPP_COL_2					0x16c 0x5b0 0x958 0x7 0x1
-#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				0x170 0x5b4 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_MOSI__GPIO1_16				0x170 0x5b4 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		0x170 0x5b4 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				0x174 0x5b8 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_MISO__GPIO1_17				0x174 0x5b8 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		0x174 0x5b8 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				0x178 0x5bc 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				0x178 0x5bc 0x990 0x1 0x1
-#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				0x178 0x5bc 0x7fc 0x2 0x1
-#define MX35_PAD_CSPI1_SS0__GPIO1_18				0x178 0x5bc 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			0x178 0x5bc 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				0x17c 0x5c0 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SS1__PWM_PWMO				0x17c 0x5c0 0x000 0x1 0x0
-#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				0x17c 0x5c0 0x7d0 0x2 0x1
-#define MX35_PAD_CSPI1_SS1__GPIO1_19				0x17c 0x5c0 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			0x17c 0x5c0 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			0x17c 0x5c0 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				0x180 0x5c4 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SCLK__GPIO3_4				0x180 0x5c4 0x904 0x5 0x0
-#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			0x180 0x5c4 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		0x180 0x5c4 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			0x184 0x5c8 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				0x184 0x5c8 0x908 0x5 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			0x184 0x5c8 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	0x184 0x5c8 0x000 0x7 0x0
-#define MX35_PAD_RXD1__UART1_RXD_MUX				0x188 0x5cc 0x000 0x0 0x0
-#define MX35_PAD_RXD1__CSPI2_MOSI				0x188 0x5cc 0x7ec 0x1 0x1
-#define MX35_PAD_RXD1__KPP_COL_4				0x188 0x5cc 0x960 0x4 0x0
-#define MX35_PAD_RXD1__GPIO3_6					0x188 0x5cc 0x90c 0x5 0x0
-#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			0x188 0x5cc 0x000 0x7 0x0
-#define MX35_PAD_TXD1__UART1_TXD_MUX				0x18c 0x5d0 0x000 0x0 0x0
-#define MX35_PAD_TXD1__CSPI2_MISO				0x18c 0x5d0 0x7e8 0x1 0x1
-#define MX35_PAD_TXD1__KPP_COL_5				0x18c 0x5d0 0x964 0x4 0x0
-#define MX35_PAD_TXD1__GPIO3_7					0x18c 0x5d0 0x910 0x5 0x0
-#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			0x18c 0x5d0 0x000 0x7 0x0
-#define MX35_PAD_RTS1__UART1_RTS				0x190 0x5d4 0x000 0x0 0x0
-#define MX35_PAD_RTS1__CSPI2_SCLK				0x190 0x5d4 0x7e0 0x1 0x1
-#define MX35_PAD_RTS1__I2C3_SCL					0x190 0x5d4 0x91c 0x2 0x1
-#define MX35_PAD_RTS1__IPU_CSI_D_0				0x190 0x5d4 0x930 0x3 0x1
-#define MX35_PAD_RTS1__KPP_COL_6				0x190 0x5d4 0x968 0x4 0x0
-#define MX35_PAD_RTS1__GPIO3_8					0x190 0x5d4 0x914 0x5 0x0
-#define MX35_PAD_RTS1__EMI_NANDF_CE1				0x190 0x5d4 0x000 0x6 0x0
-#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			0x190 0x5d4 0x000 0x7 0x0
-#define MX35_PAD_CTS1__UART1_CTS				0x194 0x5d8 0x000 0x0 0x0
-#define MX35_PAD_CTS1__CSPI2_RDY				0x194 0x5d8 0x7e4 0x1 0x1
-#define MX35_PAD_CTS1__I2C3_SDA					0x194 0x5d8 0x920 0x2 0x1
-#define MX35_PAD_CTS1__IPU_CSI_D_1				0x194 0x5d8 0x934 0x3 0x1
-#define MX35_PAD_CTS1__KPP_COL_7				0x194 0x5d8 0x96c 0x4 0x0
-#define MX35_PAD_CTS1__GPIO3_9					0x194 0x5d8 0x918 0x5 0x0
-#define MX35_PAD_CTS1__EMI_NANDF_CE2				0x194 0x5d8 0x000 0x6 0x0
-#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			0x194 0x5d8 0x000 0x7 0x0
-#define MX35_PAD_RXD2__UART2_RXD_MUX				0x198 0x5dc 0x000 0x0 0x0
-#define MX35_PAD_RXD2__KPP_ROW_4				0x198 0x5dc 0x980 0x4 0x0
-#define MX35_PAD_RXD2__GPIO3_10					0x198 0x5dc 0x8ec 0x5 0x0
-#define MX35_PAD_TXD2__UART2_TXD_MUX				0x19c 0x5e0 0x000 0x0 0x0
-#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			0x19c 0x5e0 0x994 0x1 0x2
-#define MX35_PAD_TXD2__KPP_ROW_5				0x19c 0x5e0 0x984 0x4 0x0
-#define MX35_PAD_TXD2__GPIO3_11					0x19c 0x5e0 0x8f0 0x5 0x0
-#define MX35_PAD_RTS2__UART2_RTS				0x1a0 0x5e4 0x000 0x0 0x0
-#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				0x1a0 0x5e4 0x998 0x1 0x1
-#define MX35_PAD_RTS2__CAN2_RXCAN				0x1a0 0x5e4 0x7cc 0x2 0x1
-#define MX35_PAD_RTS2__IPU_CSI_D_2				0x1a0 0x5e4 0x938 0x3 0x1
-#define MX35_PAD_RTS2__KPP_ROW_6				0x1a0 0x5e4 0x988 0x4 0x0
-#define MX35_PAD_RTS2__GPIO3_12					0x1a0 0x5e4 0x8f4 0x5 0x0
-#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				0x1a0 0x5e4 0x000 0x6 0x0
-#define MX35_PAD_RTS2__UART3_RXD_MUX				0x1a0 0x5e4 0x9a0 0x7 0x0
-#define MX35_PAD_CTS2__UART2_CTS				0x1a4 0x5e8 0x000 0x0 0x0
-#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				0x1a4 0x5e8 0x000 0x1 0x0
-#define MX35_PAD_CTS2__CAN2_TXCAN				0x1a4 0x5e8 0x000 0x2 0x0
-#define MX35_PAD_CTS2__IPU_CSI_D_3				0x1a4 0x5e8 0x93c 0x3 0x1
-#define MX35_PAD_CTS2__KPP_ROW_7				0x1a4 0x5e8 0x98c 0x4 0x0
-#define MX35_PAD_CTS2__GPIO3_13					0x1a4 0x5e8 0x8f8 0x5 0x0
-#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				0x1a4 0x5e8 0x000 0x6 0x0
-#define MX35_PAD_CTS2__UART3_TXD_MUX				0x1a4 0x5e8 0x000 0x7 0x0
-#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				0x000 0x5ec 0x000 0x0 0x0
-#define MX35_PAD_TCK__SJC_TCK					0x000 0x5f0 0x000 0x0 0x0
-#define MX35_PAD_TMS__SJC_TMS					0x000 0x5f4 0x000 0x0 0x0
-#define MX35_PAD_TDI__SJC_TDI					0x000 0x5f8 0x000 0x0 0x0
-#define MX35_PAD_TDO__SJC_TDO					0x000 0x5fc 0x000 0x0 0x0
-#define MX35_PAD_TRSTB__SJC_TRSTB				0x000 0x600 0x000 0x0 0x0
-#define MX35_PAD_DE_B__SJC_DE_B					0x000 0x604 0x000 0x0 0x0
-#define MX35_PAD_SJC_MOD__SJC_MOD				0x000 0x608 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			0x1a8 0x60c 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			0x1a8 0x60c 0x000 0x1 0x0
-#define MX35_PAD_USBOTG_PWR__GPIO3_14				0x1a8 0x60c 0x8fc 0x5 0x0
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			0x1ac 0x610 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			0x1ac 0x610 0x9f4 0x1 0x1
-#define MX35_PAD_USBOTG_OC__GPIO3_15				0x1ac 0x610 0x900 0x5 0x0
-#define MX35_PAD_LD0__IPU_DISPB_DAT_0				0x1b0 0x614 0x000 0x0 0x0
-#define MX35_PAD_LD0__GPIO2_0					0x1b0 0x614 0x868 0x5 0x1
-#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			0x1b0 0x614 0x000 0x6 0x0
-#define MX35_PAD_LD1__IPU_DISPB_DAT_1				0x1b4 0x618 0x000 0x0 0x0
-#define MX35_PAD_LD1__GPIO2_1					0x1b4 0x618 0x894 0x5 0x0
-#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			0x1b4 0x618 0x000 0x6 0x0
-#define MX35_PAD_LD2__IPU_DISPB_DAT_2				0x1b8 0x61c 0x000 0x0 0x0
-#define MX35_PAD_LD2__GPIO2_2					0x1b8 0x61c 0x8c0 0x5 0x0
-#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			0x1b8 0x61c 0x000 0x6 0x0
-#define MX35_PAD_LD3__IPU_DISPB_DAT_3				0x1bc 0x620 0x000 0x0 0x0
-#define MX35_PAD_LD3__GPIO2_3					0x1bc 0x620 0x8cc 0x5 0x0
-#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			0x1bc 0x620 0x000 0x6 0x0
-#define MX35_PAD_LD4__IPU_DISPB_DAT_4				0x1c0 0x624 0x000 0x0 0x0
-#define MX35_PAD_LD4__GPIO2_4					0x1c0 0x624 0x8d0 0x5 0x0
-#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			0x1c0 0x624 0x000 0x6 0x0
-#define MX35_PAD_LD5__IPU_DISPB_DAT_5				0x1c4 0x628 0x000 0x0 0x0
-#define MX35_PAD_LD5__GPIO2_5					0x1c4 0x628 0x8d4 0x5 0x0
-#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			0x1c4 0x628 0x000 0x6 0x0
-#define MX35_PAD_LD6__IPU_DISPB_DAT_6				0x1c8 0x62c 0x000 0x0 0x0
-#define MX35_PAD_LD6__GPIO2_6					0x1c8 0x62c 0x8d8 0x5 0x0
-#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			0x1c8 0x62c 0x000 0x6 0x0
-#define MX35_PAD_LD7__IPU_DISPB_DAT_7				0x1cc 0x630 0x000 0x0 0x0
-#define MX35_PAD_LD7__GPIO2_7					0x1cc 0x630 0x8dc 0x5 0x0
-#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			0x1cc 0x630 0x000 0x6 0x0
-#define MX35_PAD_LD8__IPU_DISPB_DAT_8				0x1d0 0x634 0x000 0x0 0x0
-#define MX35_PAD_LD8__GPIO2_8					0x1d0 0x634 0x8e0 0x5 0x0
-#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			0x1d0 0x634 0x000 0x6 0x0
-#define MX35_PAD_LD9__IPU_DISPB_DAT_9				0x1d4 0x638 0x000 0x0 0x0
-#define MX35_PAD_LD9__GPIO2_9					0x1d4 0x638 0x8e4 0x5 0x0
-#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			0x1d4 0x638 0x000 0x6 0x0
-#define MX35_PAD_LD10__IPU_DISPB_DAT_10				0x1d8 0x63c 0x000 0x0 0x0
-#define MX35_PAD_LD10__GPIO2_10					0x1d8 0x63c 0x86c 0x5 0x0
-#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			0x1d8 0x63c 0x000 0x6 0x0
-#define MX35_PAD_LD11__IPU_DISPB_DAT_11				0x1dc 0x640 0x000 0x0 0x0
-#define MX35_PAD_LD11__GPIO2_11					0x1dc 0x640 0x870 0x5 0x0
-#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			0x1dc 0x640 0x000 0x6 0x0
-#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			0x1dc 0x640 0x000 0x7 0x0
-#define MX35_PAD_LD12__IPU_DISPB_DAT_12				0x1e0 0x644 0x000 0x0 0x0
-#define MX35_PAD_LD12__GPIO2_12					0x1e0 0x644 0x874 0x5 0x0
-#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			0x1e0 0x644 0x000 0x6 0x0
-#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			0x1e0 0x644 0x000 0x7 0x0
-#define MX35_PAD_LD13__IPU_DISPB_DAT_13				0x1e4 0x648 0x000 0x0 0x0
-#define MX35_PAD_LD13__GPIO2_13					0x1e4 0x648 0x878 0x5 0x0
-#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			0x1e4 0x648 0x000 0x6 0x0
-#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			0x1e4 0x648 0x000 0x7 0x0
-#define MX35_PAD_LD14__IPU_DISPB_DAT_14				0x1e8 0x64c 0x000 0x0 0x0
-#define MX35_PAD_LD14__GPIO2_14					0x1e8 0x64c 0x87c 0x5 0x0
-#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		0x1e8 0x64c 0x000 0x6 0x0
-#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			0x1e8 0x64c 0x000 0x7 0x0
-#define MX35_PAD_LD15__IPU_DISPB_DAT_15				0x1ec 0x650 0x000 0x0 0x0
-#define MX35_PAD_LD15__GPIO2_15					0x1ec 0x650 0x880 0x5 0x0
-#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		0x1ec 0x650 0x000 0x6 0x0
-#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			0x1ec 0x650 0x000 0x7 0x0
-#define MX35_PAD_LD16__IPU_DISPB_DAT_16				0x1f0 0x654 0x000 0x0 0x0
-#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			0x1f0 0x654 0x928 0x2 0x0
-#define MX35_PAD_LD16__GPIO2_16					0x1f0 0x654 0x884 0x5 0x0
-#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		0x1f0 0x654 0x000 0x6 0x0
-#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			0x1f0 0x654 0x000 0x7 0x0
-#define MX35_PAD_LD17__IPU_DISPB_DAT_17				0x1f4 0x658 0x000 0x0 0x0
-#define MX35_PAD_LD17__IPU_DISPB_CS2				0x1f4 0x658 0x000 0x2 0x0
-#define MX35_PAD_LD17__GPIO2_17					0x1f4 0x658 0x888 0x5 0x0
-#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		0x1f4 0x658 0x000 0x6 0x0
-#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			0x1f4 0x658 0x000 0x7 0x0
-#define MX35_PAD_LD18__IPU_DISPB_DAT_18				0x1f8 0x65c 0x000 0x0 0x0
-#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			0x1f8 0x65c 0x924 0x1 0x1
-#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			0x1f8 0x65c 0x928 0x2 0x1
-#define MX35_PAD_LD18__ESDHC3_CMD				0x1f8 0x65c 0x818 0x3 0x0
-#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			0x1f8 0x65c 0x9b0 0x4 0x0
-#define MX35_PAD_LD18__GPIO3_24					0x1f8 0x65c 0x000 0x5 0x0
-#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		0x1f8 0x65c 0x000 0x6 0x0
-#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			0x1f8 0x65c 0x000 0x7 0x0
-#define MX35_PAD_LD19__IPU_DISPB_DAT_19				0x1fc 0x660 0x000 0x0 0x0
-#define MX35_PAD_LD19__IPU_DISPB_BCLK				0x1fc 0x660 0x000 0x1 0x0
-#define MX35_PAD_LD19__IPU_DISPB_CS1				0x1fc 0x660 0x000 0x2 0x0
-#define MX35_PAD_LD19__ESDHC3_CLK				0x1fc 0x660 0x814 0x3 0x0
-#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			0x1fc 0x660 0x9c4 0x4 0x0
-#define MX35_PAD_LD19__GPIO3_25					0x1fc 0x660 0x000 0x5 0x0
-#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		0x1fc 0x660 0x000 0x6 0x0
-#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			0x1fc 0x660 0x000 0x7 0x0
-#define MX35_PAD_LD20__IPU_DISPB_DAT_20				0x200 0x664 0x000 0x0 0x0
-#define MX35_PAD_LD20__IPU_DISPB_CS0				0x200 0x664 0x000 0x1 0x0
-#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				0x200 0x664 0x000 0x2 0x0
-#define MX35_PAD_LD20__ESDHC3_DAT0				0x200 0x664 0x81c 0x3 0x0
-#define MX35_PAD_LD20__GPIO3_26					0x200 0x664 0x000 0x5 0x0
-#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		0x200 0x664 0x000 0x6 0x0
-#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			0x200 0x664 0x000 0x7 0x0
-#define MX35_PAD_LD21__IPU_DISPB_DAT_21				0x204 0x668 0x000 0x0 0x0
-#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				0x204 0x668 0x000 0x1 0x0
-#define MX35_PAD_LD21__IPU_DISPB_SER_RS				0x204 0x668 0x000 0x2 0x0
-#define MX35_PAD_LD21__ESDHC3_DAT1				0x204 0x668 0x820 0x3 0x0
-#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			0x204 0x668 0x000 0x4 0x0
-#define MX35_PAD_LD21__GPIO3_27					0x204 0x668 0x000 0x5 0x0
-#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x204 0x668 0x000 0x6 0x0
-#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			0x204 0x668 0x000 0x7 0x0
-#define MX35_PAD_LD22__IPU_DISPB_DAT_22				0x208 0x66c 0x000 0x0 0x0
-#define MX35_PAD_LD22__IPU_DISPB_WR				0x208 0x66c 0x000 0x1 0x0
-#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				0x208 0x66c 0x92c 0x2 0x0
-#define MX35_PAD_LD22__ESDHC3_DAT2				0x208 0x66c 0x824 0x3 0x0
-#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			0x208 0x66c 0x9c8 0x4 0x0
-#define MX35_PAD_LD22__GPIO3_28					0x208 0x66c 0x000 0x5 0x0
-#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			0x208 0x66c 0x000 0x6 0x0
-#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				0x208 0x66c 0x000 0x7 0x0
-#define MX35_PAD_LD23__IPU_DISPB_DAT_23				0x20c 0x670 0x000 0x0 0x0
-#define MX35_PAD_LD23__IPU_DISPB_RD				0x20c 0x670 0x000 0x1 0x0
-#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			0x20c 0x670 0x92c 0x2 0x1
-#define MX35_PAD_LD23__ESDHC3_DAT3				0x20c 0x670 0x828 0x3 0x0
-#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			0x20c 0x670 0x9c0 0x4 0x0
-#define MX35_PAD_LD23__GPIO3_29					0x20c 0x670 0x000 0x5 0x0
-#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			0x20c 0x670 0x000 0x6 0x0
-#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				0x20c 0x670 0x000 0x7 0x0
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			0x210 0x674 0x000 0x0 0x0
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			0x210 0x674 0x92c 0x2 0x2
-#define MX35_PAD_D3_HSYNC__GPIO3_30				0x210 0x674 0x000 0x5 0x0
-#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		0x210 0x674 0x000 0x6 0x0
-#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			0x210 0x674 0x000 0x7 0x0
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			0x214 0x678 0x000 0x0 0x0
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			0x214 0x678 0x000 0x2 0x0
-#define MX35_PAD_D3_FPSHIFT__GPIO3_31				0x214 0x678 0x000 0x5 0x0
-#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	0x214 0x678 0x000 0x6 0x0
-#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		0x214 0x678 0x000 0x7 0x0
-#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			0x218 0x67c 0x000 0x0 0x0
-#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			0x218 0x67c 0x000 0x2 0x0
-#define MX35_PAD_D3_DRDY__GPIO1_0				0x218 0x67c 0x82c 0x5 0x2
-#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		0x218 0x67c 0x000 0x6 0x0
-#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			0x218 0x67c 0x000 0x7 0x0
-#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			0x21c 0x680 0x000 0x0 0x0
-#define MX35_PAD_CONTRAST__GPIO1_1				0x21c 0x680 0x838 0x5 0x2
-#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	0x21c 0x680 0x000 0x6 0x0
-#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			0x21c 0x680 0x000 0x7 0x0
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			0x220 0x684 0x000 0x0 0x0
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			0x220 0x684 0x000 0x2 0x0
-#define MX35_PAD_D3_VSYNC__GPIO1_2				0x220 0x684 0x848 0x5 0x1
-#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			0x220 0x684 0x000 0x6 0x0
-#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			0x220 0x684 0x000 0x7 0x0
-#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			0x224 0x688 0x000 0x0 0x0
-#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			0x224 0x688 0x000 0x2 0x0
-#define MX35_PAD_D3_REV__GPIO1_3				0x224 0x688 0x84c 0x5 0x1
-#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			0x224 0x688 0x000 0x6 0x0
-#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			0x224 0x688 0x000 0x7 0x0
-#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			0x228 0x68c 0x000 0x0 0x0
-#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				0x228 0x68c 0x000 0x2 0x0
-#define MX35_PAD_D3_CLS__GPIO1_4				0x228 0x68c 0x850 0x5 0x2
-#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		0x228 0x68c 0x000 0x6 0x0
-#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			0x228 0x68c 0x000 0x7 0x0
-#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			0x22c 0x690 0x000 0x0 0x0
-#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			0x22c 0x690 0x928 0x2 0x2
-#define MX35_PAD_D3_SPL__GPIO1_5				0x22c 0x690 0x854 0x5 0x2
-#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		0x22c 0x690 0x000 0x6 0x0
-#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			0x22c 0x690 0x000 0x7 0x0
-#define MX35_PAD_SD1_CMD__ESDHC1_CMD				0x230 0x694 0x000 0x0 0x0
-#define MX35_PAD_SD1_CMD__MSHC_SCLK				0x230 0x694 0x000 0x1 0x0
-#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			0x230 0x694 0x924 0x3 0x2
-#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			0x230 0x694 0x9b4 0x4 0x0
-#define MX35_PAD_SD1_CMD__GPIO1_6				0x230 0x694 0x858 0x5 0x2
-#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			0x230 0x694 0x000 0x7 0x0
-#define MX35_PAD_SD1_CLK__ESDHC1_CLK				0x234 0x698 0x000 0x0 0x0
-#define MX35_PAD_SD1_CLK__MSHC_BS				0x234 0x698 0x000 0x1 0x0
-#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			0x234 0x698 0x000 0x3 0x0
-#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			0x234 0x698 0x9b8 0x4 0x0
-#define MX35_PAD_SD1_CLK__GPIO1_7				0x234 0x698 0x85c 0x5 0x2
-#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			0x234 0x698 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				0x238 0x69c 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				0x238 0x69c 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			0x238 0x69c 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		0x238 0x69c 0x9bc 0x4 0x0
-#define MX35_PAD_SD1_DATA0__GPIO1_8				0x238 0x69c 0x860 0x5 0x2
-#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			0x238 0x69c 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				0x23c 0x6a0 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				0x23c 0x6a0 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			0x23c 0x6a0 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		0x23c 0x6a0 0x9a4 0x4 0x0
-#define MX35_PAD_SD1_DATA1__GPIO1_9				0x23c 0x6a0 0x864 0x5 0x1
-#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			0x23c 0x6a0 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				0x240 0x6a4 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				0x240 0x6a4 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			0x240 0x6a4 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		0x240 0x6a4 0x9a8 0x4 0x0
-#define MX35_PAD_SD1_DATA2__GPIO1_10				0x240 0x6a4 0x830 0x5 0x1
-#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			0x240 0x6a4 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				0x244 0x6a8 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				0x244 0x6a8 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			0x244 0x6a8 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		0x244 0x6a8 0x9ac 0x4 0x0
-#define MX35_PAD_SD1_DATA3__GPIO1_11				0x244 0x6a8 0x834 0x5 0x1
-#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			0x244 0x6a8 0x000 0x7 0x0
-#define MX35_PAD_SD2_CMD__ESDHC2_CMD				0x248 0x6ac 0x000 0x0 0x0
-#define MX35_PAD_SD2_CMD__I2C3_SCL				0x248 0x6ac 0x91c 0x1 0x2
-#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				0x248 0x6ac 0x804 0x2 0x0
-#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				0x248 0x6ac 0x938 0x3 0x2
-#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			0x248 0x6ac 0x9dc 0x4 0x0
-#define MX35_PAD_SD2_CMD__GPIO2_0				0x248 0x6ac 0x868 0x5 0x2
-#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			0x248 0x6ac 0x000 0x6 0x0
-#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			0x248 0x6ac 0x928 0x7 0x3
-#define MX35_PAD_SD2_CLK__ESDHC2_CLK				0x24c 0x6b0 0x000 0x0 0x0
-#define MX35_PAD_SD2_CLK__I2C3_SDA				0x24c 0x6b0 0x920 0x1 0x2
-#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				0x24c 0x6b0 0x808 0x2 0x0
-#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				0x24c 0x6b0 0x93c 0x3 0x2
-#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			0x24c 0x6b0 0x9e0 0x4 0x0
-#define MX35_PAD_SD2_CLK__GPIO2_1				0x24c 0x6b0 0x894 0x5 0x1
-#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			0x24c 0x6b0 0x998 0x6 0x2
-#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				0x24c 0x6b0 0x000 0x7 0x0
-#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				0x250 0x6b4 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			0x250 0x6b4 0x9a0 0x1 0x1
-#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				0x250 0x6b4 0x80c 0x2 0x0
-#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				0x250 0x6b4 0x940 0x3 0x1
-#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		0x250 0x6b4 0x9e4 0x4 0x0
-#define MX35_PAD_SD2_DATA0__GPIO2_2				0x250 0x6b4 0x8c0 0x5 0x1
-#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			0x250 0x6b4 0x994 0x6 0x3
-#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				0x254 0x6b8 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			0x254 0x6b8 0x000 0x1 0x0
-#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				0x254 0x6b8 0x810 0x2 0x0
-#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				0x254 0x6b8 0x944 0x3 0x1
-#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		0x254 0x6b8 0x9cc 0x4 0x0
-#define MX35_PAD_SD2_DATA1__GPIO2_3				0x254 0x6b8 0x8cc 0x5 0x1
-#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				0x258 0x6bc 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA2__UART3_RTS				0x258 0x6bc 0x99c 0x1 0x0
-#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				0x258 0x6bc 0x7c8 0x2 0x1
-#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				0x258 0x6bc 0x948 0x3 0x1
-#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		0x258 0x6bc 0x9d0 0x4 0x0
-#define MX35_PAD_SD2_DATA2__GPIO2_4				0x258 0x6bc 0x8d0 0x5 0x1
-#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				0x25c 0x6c0 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA3__UART3_CTS				0x25c 0x6c0 0x000 0x1 0x0
-#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				0x25c 0x6c0 0x000 0x2 0x0
-#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				0x25c 0x6c0 0x94c 0x3 0x1
-#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		0x25c 0x6c0 0x9d4 0x4 0x0
-#define MX35_PAD_SD2_DATA3__GPIO2_5				0x25c 0x6c0 0x8d4 0x5 0x1
-#define MX35_PAD_ATA_CS0__ATA_CS0				0x260 0x6c4 0x000 0x0 0x0
-#define MX35_PAD_ATA_CS0__CSPI1_SS3				0x260 0x6c4 0x7dc 0x1 0x1
-#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				0x260 0x6c4 0x000 0x3 0x0
-#define MX35_PAD_ATA_CS0__GPIO2_6				0x260 0x6c4 0x8d8 0x5 0x1
-#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				0x260 0x6c4 0x000 0x6 0x0
-#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		0x260 0x6c4 0x000 0x7 0x0
-#define MX35_PAD_ATA_CS1__ATA_CS1				0x264 0x6c8 0x000 0x0 0x0
-#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				0x264 0x6c8 0x000 0x3 0x0
-#define MX35_PAD_ATA_CS1__CSPI2_SS0				0x264 0x6c8 0x7f0 0x4 0x1
-#define MX35_PAD_ATA_CS1__GPIO2_7				0x264 0x6c8 0x8dc 0x5 0x1
-#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				0x264 0x6c8 0x000 0x6 0x0
-#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		0x264 0x6c8 0x000 0x7 0x0
-#define MX35_PAD_ATA_DIOR__ATA_DIOR				0x268 0x6cc 0x000 0x0 0x0
-#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				0x268 0x6cc 0x81c 0x1 0x1
-#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			0x268 0x6cc 0x9c4 0x2 0x1
-#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			0x268 0x6cc 0x000 0x3 0x0
-#define MX35_PAD_ATA_DIOR__CSPI2_SS1				0x268 0x6cc 0x7f4 0x4 0x1
-#define MX35_PAD_ATA_DIOR__GPIO2_8				0x268 0x6cc 0x8e0 0x5 0x1
-#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				0x268 0x6cc 0x000 0x6 0x0
-#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		0x268 0x6cc 0x000 0x7 0x0
-#define MX35_PAD_ATA_DIOW__ATA_DIOW				0x26c 0x6d0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				0x26c 0x6d0 0x820 0x1 0x1
-#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			0x26c 0x6d0 0x000 0x2 0x0
-#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			0x26c 0x6d0 0x000 0x3 0x0
-#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				0x26c 0x6d0 0x7ec 0x4 0x2
-#define MX35_PAD_ATA_DIOW__GPIO2_9				0x26c 0x6d0 0x8e4 0x5 0x1
-#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				0x26c 0x6d0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		0x26c 0x6d0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DMACK__ATA_DMACK				0x270 0x6d4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				0x270 0x6d4 0x824 0x1 0x1
-#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			0x270 0x6d4 0x9c8 0x2 0x1
-#define MX35_PAD_ATA_DMACK__CSPI2_MISO				0x270 0x6d4 0x7e8 0x4 0x2
-#define MX35_PAD_ATA_DMACK__GPIO2_10				0x270 0x6d4 0x86c 0x5 0x1
-#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				0x270 0x6d4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		0x270 0x6d4 0x000 0x7 0x0
-#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			0x274 0x6d8 0x000 0x0 0x0
-#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			0x274 0x6d8 0x828 0x1 0x1
-#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		0x274 0x6d8 0x9a4 0x2 0x1
-#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			0x274 0x6d8 0x000 0x3 0x0
-#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				0x274 0x6d8 0x7e4 0x4 0x2
-#define MX35_PAD_ATA_RESET_B__GPIO2_11				0x274 0x6d8 0x870 0x5 0x1
-#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			0x274 0x6d8 0x000 0x6 0x0
-#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		0x274 0x6d8 0x000 0x7 0x0
-#define MX35_PAD_ATA_IORDY__ATA_IORDY				0x278 0x6dc 0x000 0x0 0x0
-#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				0x278 0x6dc 0x000 0x1 0x0
-#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		0x278 0x6dc 0x9a8 0x2 0x1
-#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			0x278 0x6dc 0x92c 0x3 0x3
-#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				0x278 0x6dc 0x000 0x4 0x0
-#define MX35_PAD_ATA_IORDY__GPIO2_12				0x278 0x6dc 0x874 0x5 0x1
-#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				0x278 0x6dc 0x000 0x6 0x0
-#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		0x278 0x6dc 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA0__ATA_DATA_0				0x27c 0x6e0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				0x27c 0x6e0 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		0x27c 0x6e0 0x9ac 0x2 0x1
-#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			0x27c 0x6e0 0x928 0x3 0x4
-#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				0x27c 0x6e0 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA0__GPIO2_13				0x27c 0x6e0 0x878 0x5 0x1
-#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				0x27c 0x6e0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		0x27c 0x6e0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA1__ATA_DATA_1				0x280 0x6e4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				0x280 0x6e4 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		0x280 0x6e4 0x9b0 0x2 0x1
-#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			0x280 0x6e4 0x000 0x3 0x0
-#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				0x280 0x6e4 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA1__GPIO2_14				0x280 0x6e4 0x87c 0x5 0x1
-#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				0x280 0x6e4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			0x280 0x6e4 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA2__ATA_DATA_2				0x284 0x6e8 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				0x284 0x6e8 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		0x284 0x6e8 0x9b4 0x2 0x1
-#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			0x284 0x6e8 0x000 0x3 0x0
-#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				0x284 0x6e8 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA2__GPIO2_15				0x284 0x6e8 0x880 0x5 0x1
-#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				0x284 0x6e8 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			0x284 0x6e8 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA3__ATA_DATA_3				0x288 0x6ec 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				0x288 0x6ec 0x814 0x1 0x1
-#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		0x288 0x6ec 0x9b8 0x2 0x1
-#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				0x288 0x6ec 0x7e0 0x4 0x2
-#define MX35_PAD_ATA_DATA3__GPIO2_16				0x288 0x6ec 0x884 0x5 0x1
-#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			0x288 0x6ec 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			0x288 0x6ec 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA4__ATA_DATA_4				0x28c 0x6f0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				0x28c 0x6f0 0x818 0x1 0x1
-#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		0x28c 0x6f0 0x9bc 0x2 0x1
-#define MX35_PAD_ATA_DATA4__GPIO2_17				0x28c 0x6f0 0x888 0x5 0x1
-#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			0x28c 0x6f0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			0x28c 0x6f0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA5__ATA_DATA_5				0x290 0x6f4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		0x290 0x6f4 0x9c0 0x2 0x1
-#define MX35_PAD_ATA_DATA5__GPIO2_18				0x290 0x6f4 0x88c 0x5 0x1
-#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			0x290 0x6f4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			0x290 0x6f4 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA6__ATA_DATA_6				0x294 0x6f8 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				0x294 0x6f8 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA6__UART1_DTR				0x294 0x6f8 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			0x294 0x6f8 0x7b4 0x3 0x0
-#define MX35_PAD_ATA_DATA6__GPIO2_19				0x294 0x6f8 0x890 0x5 0x1
-#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			0x294 0x6f8 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA7__ATA_DATA_7				0x298 0x6fc 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				0x298 0x6fc 0x7c8 0x1 0x2
-#define MX35_PAD_ATA_DATA7__UART1_DSR				0x298 0x6fc 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			0x298 0x6fc 0x7b0 0x3 0x0
-#define MX35_PAD_ATA_DATA7__GPIO2_20				0x298 0x6fc 0x898 0x5 0x1
-#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			0x298 0x6fc 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA8__ATA_DATA_8				0x29c 0x700 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA8__UART3_RTS				0x29c 0x700 0x99c 0x1 0x1
-#define MX35_PAD_ATA_DATA8__UART1_RI				0x29c 0x700 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			0x29c 0x700 0x7c0 0x3 0x0
-#define MX35_PAD_ATA_DATA8__GPIO2_21				0x29c 0x700 0x89c 0x5 0x1
-#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			0x29c 0x700 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA9__ATA_DATA_9				0x2a0 0x704 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA9__UART3_CTS				0x2a0 0x704 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA9__UART1_DCD				0x2a0 0x704 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			0x2a0 0x704 0x7c4 0x3 0x0
-#define MX35_PAD_ATA_DATA9__GPIO2_22				0x2a0 0x704 0x8a0 0x5 0x1
-#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			0x2a0 0x704 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA10__ATA_DATA_10			0x2a4 0x708 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			0x2a4 0x708 0x9a0 0x1 0x2
-#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			0x2a4 0x708 0x7b8 0x3 0x0
-#define MX35_PAD_ATA_DATA10__GPIO2_23				0x2a4 0x708 0x8a4 0x5 0x1
-#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			0x2a4 0x708 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA11__ATA_DATA_11			0x2a8 0x70c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			0x2a8 0x70c 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			0x2a8 0x70c 0x7bc 0x3 0x0
-#define MX35_PAD_ATA_DATA11__GPIO2_24				0x2a8 0x70c 0x8a8 0x5 0x1
-#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			0x2a8 0x70c 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA12__ATA_DATA_12			0x2ac 0x710 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA12__I2C3_SCL				0x2ac 0x710 0x91c 0x1 0x3
-#define MX35_PAD_ATA_DATA12__GPIO2_25				0x2ac 0x710 0x8ac 0x5 0x1
-#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			0x2ac 0x710 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA13__ATA_DATA_13			0x2b0 0x714 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA13__I2C3_SDA				0x2b0 0x714 0x920 0x1 0x3
-#define MX35_PAD_ATA_DATA13__GPIO2_26				0x2b0 0x714 0x8b0 0x5 0x1
-#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			0x2b0 0x714 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA14__ATA_DATA_14			0x2b4 0x718 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			0x2b4 0x718 0x930 0x1 0x2
-#define MX35_PAD_ATA_DATA14__KPP_ROW_0				0x2b4 0x718 0x970 0x3 0x2
-#define MX35_PAD_ATA_DATA14__GPIO2_27				0x2b4 0x718 0x8b4 0x5 0x1
-#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			0x2b4 0x718 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA15__ATA_DATA_15			0x2b8 0x71c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			0x2b8 0x71c 0x934 0x1 0x2
-#define MX35_PAD_ATA_DATA15__KPP_ROW_1				0x2b8 0x71c 0x974 0x3 0x2
-#define MX35_PAD_ATA_DATA15__GPIO2_28				0x2b8 0x71c 0x8b8 0x5 0x1
-#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			0x2b8 0x71c 0x000 0x6 0x0
-#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				0x2bc 0x720 0x000 0x0 0x0
-#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				0x2bc 0x720 0x938 0x1 0x3
-#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				0x2bc 0x720 0x978 0x3 0x2
-#define MX35_PAD_ATA_INTRQ__GPIO2_29				0x2bc 0x720 0x8bc 0x5 0x1
-#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			0x2bc 0x720 0x000 0x6 0x0
-#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			0x2c0 0x724 0x000 0x0 0x0
-#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			0x2c0 0x724 0x93c 0x1 0x3
-#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				0x2c0 0x724 0x97c 0x3 0x2
-#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				0x2c0 0x724 0x8c4 0x5 0x1
-#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			0x2c0 0x724 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				0x2c4 0x728 0x000 0x0 0x0
-#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				0x2c4 0x728 0x940 0x1 0x2
-#define MX35_PAD_ATA_DMARQ__KPP_COL_0				0x2c4 0x728 0x950 0x3 0x2
-#define MX35_PAD_ATA_DMARQ__GPIO2_31				0x2c4 0x728 0x8c8 0x5 0x1
-#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			0x2c4 0x728 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			0x2c4 0x728 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA0__ATA_DA_0				0x2c8 0x72c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				0x2c8 0x72c 0x944 0x1 0x2
-#define MX35_PAD_ATA_DA0__KPP_COL_1				0x2c8 0x72c 0x954 0x3 0x2
-#define MX35_PAD_ATA_DA0__GPIO3_0				0x2c8 0x72c 0x8e8 0x5 0x1
-#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				0x2c8 0x72c 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			0x2c8 0x72c 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA1__ATA_DA_1				0x2cc 0x730 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				0x2cc 0x730 0x948 0x1 0x2
-#define MX35_PAD_ATA_DA1__KPP_COL_2				0x2cc 0x730 0x958 0x3 0x2
-#define MX35_PAD_ATA_DA1__GPIO3_1				0x2cc 0x730 0x000 0x5 0x0
-#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				0x2cc 0x730 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			0x2cc 0x730 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA2__ATA_DA_2				0x2d0 0x734 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				0x2d0 0x734 0x94c 0x1 0x2
-#define MX35_PAD_ATA_DA2__KPP_COL_3				0x2d0 0x734 0x95c 0x3 0x2
-#define MX35_PAD_ATA_DA2__GPIO3_2				0x2d0 0x734 0x000 0x5 0x0
-#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				0x2d0 0x734 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			0x2d0 0x734 0x000 0x7 0x0
-#define MX35_PAD_MLB_CLK__MLB_MLBCLK				0x2d4 0x738 0x000 0x0 0x0
-#define MX35_PAD_MLB_CLK__GPIO3_3				0x2d4 0x738 0x000 0x5 0x0
-#define MX35_PAD_MLB_DAT__MLB_MLBDAT				0x2d8 0x73c 0x000 0x0 0x0
-#define MX35_PAD_MLB_DAT__GPIO3_4				0x2d8 0x73c 0x904 0x5 0x1
-#define MX35_PAD_MLB_SIG__MLB_MLBSIG				0x2dc 0x740 0x000 0x0 0x0
-#define MX35_PAD_MLB_SIG__GPIO3_5				0x2dc 0x740 0x908 0x5 0x1
-#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				0x2e0 0x744 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			0x2e0 0x744 0x804 0x1 0x1
-#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			0x2e0 0x744 0x9a0 0x2 0x3
-#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			0x2e0 0x744 0x9ec 0x3 0x1
-#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				0x2e0 0x744 0x7ec 0x4 0x3
-#define MX35_PAD_FEC_TX_CLK__GPIO3_6				0x2e0 0x744 0x90c 0x5 0x1
-#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		0x2e0 0x744 0x928 0x6 0x5
-#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		0x2e0 0x744 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				0x2e4 0x748 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			0x2e4 0x748 0x808 0x1 0x1
-#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			0x2e4 0x748 0x000 0x2 0x0
-#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			0x2e4 0x748 0x000 0x3 0x0
-#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				0x2e4 0x748 0x7e8 0x4 0x3
-#define MX35_PAD_FEC_RX_CLK__GPIO3_7				0x2e4 0x748 0x910 0x5 0x1
-#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			0x2e4 0x748 0x92c 0x6 0x4
-#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		0x2e4 0x748 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				0x2e8 0x74c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				0x2e8 0x74c 0x80c 0x1 0x1
-#define MX35_PAD_FEC_RX_DV__UART3_RTS				0x2e8 0x74c 0x99c 0x2 0x2
-#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			0x2e8 0x74c 0x9f0 0x3 0x1
-#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				0x2e8 0x74c 0x7e0 0x4 0x3
-#define MX35_PAD_FEC_RX_DV__GPIO3_8				0x2e8 0x74c 0x914 0x5 0x1
-#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			0x2e8 0x74c 0x000 0x6 0x0
-#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		0x2e8 0x74c 0x000 0x7 0x0
-#define MX35_PAD_FEC_COL__FEC_COL				0x2ec 0x750 0x000 0x0 0x0
-#define MX35_PAD_FEC_COL__ESDHC1_DAT7				0x2ec 0x750 0x810 0x1 0x1
-#define MX35_PAD_FEC_COL__UART3_CTS				0x2ec 0x750 0x000 0x2 0x0
-#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			0x2ec 0x750 0x9cc 0x3 0x1
-#define MX35_PAD_FEC_COL__CSPI2_RDY				0x2ec 0x750 0x7e4 0x4 0x3
-#define MX35_PAD_FEC_COL__GPIO3_9				0x2ec 0x750 0x918 0x5 0x1
-#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			0x2ec 0x750 0x000 0x6 0x0
-#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			0x2ec 0x750 0x000 0x7 0x0
-#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			0x2f0 0x754 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA0__PWM_PWMO				0x2f0 0x754 0x000 0x1 0x0
-#define MX35_PAD_FEC_RDATA0__UART3_DTR				0x2f0 0x754 0x000 0x2 0x0
-#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		0x2f0 0x754 0x9d0 0x3 0x1
-#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				0x2f0 0x754 0x7f0 0x4 0x2
-#define MX35_PAD_FEC_RDATA0__GPIO3_10				0x2f0 0x754 0x8ec 0x5 0x1
-#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			0x2f0 0x754 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		0x2f0 0x754 0x000 0x7 0x0
-#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			0x2f4 0x758 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			0x2f4 0x758 0x000 0x1 0x0
-#define MX35_PAD_FEC_TDATA0__UART3_DSR				0x2f4 0x758 0x000 0x2 0x0
-#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		0x2f4 0x758 0x9d4 0x3 0x1
-#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				0x2f4 0x758 0x7f4 0x4 0x2
-#define MX35_PAD_FEC_TDATA0__GPIO3_11				0x2f4 0x758 0x8f0 0x5 0x1
-#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			0x2f4 0x758 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		0x2f4 0x758 0x000 0x7 0x0
-#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				0x2f8 0x75c 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			0x2f8 0x75c 0x998 0x1 0x3
-#define MX35_PAD_FEC_TX_EN__UART3_RI				0x2f8 0x75c 0x000 0x2 0x0
-#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		0x2f8 0x75c 0x9d8 0x3 0x1
-#define MX35_PAD_FEC_TX_EN__GPIO3_12				0x2f8 0x75c 0x8f4 0x5 0x1
-#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			0x2f8 0x75c 0x000 0x6 0x0
-#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		0x2f8 0x75c 0x000 0x7 0x0
-#define MX35_PAD_FEC_MDC__FEC_MDC				0x2fc 0x760 0x000 0x0 0x0
-#define MX35_PAD_FEC_MDC__CAN2_TXCAN				0x2fc 0x760 0x000 0x1 0x0
-#define MX35_PAD_FEC_MDC__UART3_DCD				0x2fc 0x760 0x000 0x2 0x0
-#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			0x2fc 0x760 0x9dc 0x3 0x1
-#define MX35_PAD_FEC_MDC__GPIO3_13				0x2fc 0x760 0x8f8 0x5 0x1
-#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				0x2fc 0x760 0x000 0x6 0x0
-#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			0x2fc 0x760 0x000 0x7 0x0
-#define MX35_PAD_FEC_MDIO__FEC_MDIO				0x300 0x764 0x000 0x0 0x0
-#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				0x300 0x764 0x7cc 0x1 0x2
-#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			0x300 0x764 0x9e0 0x3 0x1
-#define MX35_PAD_FEC_MDIO__GPIO3_14				0x300 0x764 0x8fc 0x5 0x1
-#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				0x300 0x764 0x000 0x6 0x0
-#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			0x300 0x764 0x000 0x7 0x0
-#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				0x304 0x768 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				0x304 0x768 0x990 0x1 0x2
-#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			0x304 0x768 0x994 0x2 0x4
-#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		0x304 0x768 0x9e4 0x3 0x1
-#define MX35_PAD_FEC_TX_ERR__GPIO3_15				0x304 0x768 0x900 0x5 0x1
-#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			0x304 0x768 0x924 0x6 0x3
-#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		0x304 0x768 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				0x308 0x76c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			0x308 0x76c 0x930 0x1 0x3
-#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		0x308 0x76c 0x9e8 0x3 0x1
-#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				0x308 0x76c 0x960 0x4 0x1
-#define MX35_PAD_FEC_RX_ERR__GPIO3_16				0x308 0x76c 0x000 0x5 0x0
-#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			0x308 0x76c 0x92c 0x6 0x5
-#define MX35_PAD_FEC_CRS__FEC_CRS				0x30c 0x770 0x000 0x0 0x0
-#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				0x30c 0x770 0x934 0x1 0x3
-#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			0x30c 0x770 0x000 0x3 0x0
-#define MX35_PAD_FEC_CRS__KPP_COL_5				0x30c 0x770 0x964 0x4 0x1
-#define MX35_PAD_FEC_CRS__GPIO3_17				0x30c 0x770 0x000 0x5 0x0
-#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			0x30c 0x770 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			0x310 0x774 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			0x310 0x774 0x938 0x1 0x4
-#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			0x310 0x774 0x000 0x2 0x0
-#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			0x310 0x774 0x9f4 0x3 0x2
-#define MX35_PAD_FEC_RDATA1__KPP_COL_6				0x310 0x774 0x968 0x4 0x1
-#define MX35_PAD_FEC_RDATA1__GPIO3_18				0x310 0x774 0x000 0x5 0x0
-#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			0x310 0x774 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			0x314 0x778 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			0x314 0x778 0x93c 0x1 0x4
-#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			0x314 0x778 0x7bc 0x2 0x1
-#define MX35_PAD_FEC_TDATA1__KPP_COL_7				0x314 0x778 0x96c 0x4 0x1
-#define MX35_PAD_FEC_TDATA1__GPIO3_19				0x314 0x778 0x000 0x5 0x0
-#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			0x314 0x778 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			0x318 0x77c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			0x318 0x77c 0x940 0x1 0x3
-#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			0x318 0x77c 0x7b4 0x2 0x1
-#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				0x318 0x77c 0x980 0x4 0x1
-#define MX35_PAD_FEC_RDATA2__GPIO3_20				0x318 0x77c 0x000 0x5 0x0
-#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			0x31c 0x780 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			0x31c 0x780 0x944 0x1 0x3
-#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			0x31c 0x780 0x7b0 0x2 0x1
-#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				0x31c 0x780 0x984 0x4 0x1
-#define MX35_PAD_FEC_TDATA2__GPIO3_21				0x31c 0x780 0x000 0x5 0x0
-#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			0x320 0x784 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			0x320 0x784 0x948 0x1 0x3
-#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			0x320 0x784 0x7c0 0x2 0x1
-#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				0x320 0x784 0x988 0x4 0x1
-#define MX35_PAD_FEC_RDATA3__GPIO3_22				0x320 0x784 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			0x324 0x788 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			0x324 0x788 0x94c 0x1 0x3
-#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			0x324 0x788 0x7c4 0x2 0x1
-#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				0x324 0x788 0x98c 0x4 0x1
-#define MX35_PAD_FEC_TDATA3__GPIO3_23				0x324 0x788 0x000 0x5 0x0
-#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			0x000 0x78c 0x000 0x0 0x0
-#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			0x000 0x790 0x000 0x0 0x0
-
-#endif /* __DTS_IMX35_PINFUNC_H */
diff --git a/src/arm/imx35.dtsi b/src/arm/imx35.dtsi
deleted file mode 100644
index 442e216ca9d9..000000000000
--- a/src/arm/imx35.dtsi
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Copyright 2012 Steffen Trumtrar, Pengutronix
- *
- * based on imx27.dtsi
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include "imx35-pinfunc.h"
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		spi0 = &spi1;
-		spi1 = &spi2;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1136";
-			device_type = "cpu";
-		};
-	};
-
-	avic: avic-interrupt-controller@68000000 {
-		compatible = "fsl,imx35-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x10000000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		L2: l2-cache@30000000 {
-			compatible = "arm,l210-cache";
-			reg = <0x30000000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		aips1: aips@43f00000 {
-			compatible = "fsl,aips", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			i2c1: i2c@43f80000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f80000 0x4000>;
-				clocks = <&clks 51>;
-				clock-names = "ipg_per";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@43f84000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f84000 0x4000>;
-				clocks = <&clks 53>;
-				clock-names = "ipg_per";
-				interrupts = <3>;
-				status = "disabled";
-			};
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				clocks = <&clks 9>, <&clks 70>;
-				clock-names = "ipg", "per";
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				clocks = <&clks 9>, <&clks 71>;
-				clock-names = "ipg", "per";
-				interrupts = <32>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@43f98000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f98000 0x4000>;
-				clocks = <&clks 52>;
-				clock-names = "ipg_per";
-				interrupts = <4>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@43fa0000 {
-				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
-				reg = <0x43fa0000 0x4000>;
-				interrupts = <11>;
-				clocks = <&clks 68>;
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			spi1: cspi@43fa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-cspi";
-				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 35 &clks 35>;
-				clock-names = "ipg", "per";
-				interrupts = <14>;
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@43fac000 {
-				compatible = "fsl,imx35-iomuxc";
-				reg = <0x43fac000 0x4000>;
-			};
-		};
-
-		spba: spba-bus@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x100000>;
-			ranges;
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				clocks = <&clks 9>, <&clks 72>;
-				clock-names = "ipg", "per";
-				interrupts = <18>;
-				status = "disabled";
-			};
-
-			spi2: cspi@50010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-cspi";
-				reg = <0x50010000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks 36 &clks 36>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			fec: fec@50038000 {
-				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
-				reg = <0x50038000 0x4000>;
-				clocks = <&clks 46>, <&clks 8>;
-				clock-names = "ipg", "ahb";
-				interrupts = <57>;
-				status = "disabled";
-			};
-		};
-
-		aips2: aips@53f00000 {
-			compatible = "fsl,aips", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			clks: ccm@53f80000 {
-				compatible = "fsl,imx35-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>;
-				#clock-cells = <1>;
-			};
-
-			gpt: timer@53f90000 {
-				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks 9>, <&clks 50>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio3: gpio@53fa4000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <56>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			esdhc1: esdhc@53fb4000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fb4000 0x4000>;
-				interrupts = <7>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc2: esdhc@53fb8000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fb8000 0x4000>;
-				interrupts = <8>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc3: esdhc@53fbc000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <9>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			audmux: audmux@53fc4000 {
-				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
-				reg = <0x53fc4000 0x4000>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@53fcc000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <52>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53fd0000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sdma: sdma@53fd4000 {
-				compatible = "fsl,imx35-sdma";
-				reg = <0x53fd4000 0x4000>;
-				clocks = <&clks 9>, <&clks 65>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				interrupts = <34>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
-			};
-
-			wdog: wdog@53fdc000 {
-				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
-				reg = <0x53fdc000 0x4000>;
-				clocks = <&clks 74>;
-				clock-names = "";
-				interrupts = <55>;
-			};
-
-			can1: can@53fe4000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
-				reg = <0x53fe4000 0x1000>;
-				clocks = <&clks 33>;
-				clock-names = "ipg";
-				interrupts = <43>;
-				status = "disabled";
-			};
-
-			can2: can@53fe8000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
-				reg = <0x53fe8000 0x1000>;
-				clocks = <&clks 34>;
-				clock-names = "ipg";
-				interrupts = <44>;
-				status = "disabled";
-			};
-
-			usbotg: usb@53ff4000 {
-				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
-				reg = <0x53ff4000 0x0200>;
-				interrupts = <37>;
-				clocks = <&clks 73>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbhost1: usb@53ff4400 {
-				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
-				reg = <0x53ff4400 0x0200>;
-				interrupts = <35>;
-				clocks = <&clks 73>;
-				fsl,usbmisc = <&usbmisc 1>;
-				fsl,usbphy = <&usbphy1>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@53ff4600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx35-usbmisc";
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
-				reg = <0x53ff4600 0x00f>;
-			};
-		};
-
-		emi@80000000 { /* External Memory Interface */
-			compatible = "fsl,emi", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x40000000>;
-			ranges;
-
-			nfc: nand@bb000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
-				reg = <0xbb000000 0x2000>;
-				clocks = <&clks 29>;
-				clock-names = "";
-				interrupts = <33>;
-				status = "disabled";
-			};
-
-			weim: weim@b8002000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clocks = <&clks 0>;
-				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
-				reg = <0xb8002000 0x1000>;
-				ranges = <
-					0 0 0xa0000000 0x8000000
-					1 0 0xa8000000 0x8000000
-					2 0 0xb0000000 0x2000000
-					3 0 0xb2000000 0x2000000
-					4 0 0xb4000000 0x2000000
-					5 0 0xb6000000 0x2000000
-				>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-		};
-	};
-};
diff --git a/src/arm/imx50-evk.dts b/src/arm/imx50-evk.dts
deleted file mode 100644
index 1b22512c91bd..000000000000
--- a/src/arm/imx50-evk.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx50.dtsi"
-
-/ {
-	model = "Freescale i.MX50 Evaluation Kit";
-	compatible = "fsl,imx50-evk", "fsl,imx50";
-
-	memory {
-		reg = <0x70000000 0x80000000>;
-	};
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
-	status = "okay";
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p32", "m25p80";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "kernel";
-			reg = <0x100000 0x300000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 0>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx50-evk {
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
-				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
-				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
-				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
-				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
-				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
-				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
-				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
-				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
-				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
-				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
-				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
-				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
-				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
-				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
-				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbh2 {
-	status = "okay";
-};
-
-&usbh3 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
diff --git a/src/arm/imx50-pinfunc.h b/src/arm/imx50-pinfunc.h
deleted file mode 100644
index 97e6e7f4ebdd..000000000000
--- a/src/arm/imx50-pinfunc.h
+++ /dev/null
@@ -1,923 +0,0 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX50_PINFUNC_H
-#define __DTS_IMX50_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
-#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
-#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
-#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
-#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
-#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
-#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
-#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
-#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
-#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
-#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
-#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
-#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
-#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
-#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
-#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
-#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
-#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
-#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
-#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
-#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
-#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
-#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
-#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
-#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
-#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
-#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
-#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
-#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
-#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
-#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
-#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
-#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
-#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
-#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
-#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
-#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
-#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
-#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
-#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
-#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
-#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
-#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
-#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
-#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
-#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
-#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
-#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
-#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
-#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
-#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
-#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
-#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
-#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
-#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
-#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
-#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
-#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
-#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
-#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
-#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
-#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
-#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
-#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
-#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
-#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
-#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
-#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
-#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
-#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
-#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
-#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
-#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
-#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
-#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
-#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
-#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
-#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
-#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
-#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
-#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
-#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
-#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
-#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
-#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
-#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
-#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
-#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
-#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
-#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
-#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
-#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
-#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
-#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
-#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
-#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
-#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
-#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
-#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
-#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
-#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
-#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
-#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
-#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
-#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
-#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
-#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
-#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
-#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
-#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
-#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
-#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
-#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
-#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
-#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
-#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
-#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
-#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
-#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
-#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
-#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
-#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
-#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
-#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
-#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
-#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
-#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
-#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
-#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
-#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
-#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
-#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
-#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
-#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
-#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
-#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
-#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
-#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
-#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
-#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
-#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
-#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
-#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
-#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
-#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
-#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
-#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
-#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
-#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
-#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
-#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
-#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
-#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
-#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
-#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
-#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
-#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
-#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
-#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
-#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
-#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
-#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
-#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
-#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
-#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
-#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
-#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
-#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
-#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
-#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
-#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
-#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
-#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
-#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
-#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
-#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
-#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
-#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
-#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
-#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
-#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
-#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
-#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
-#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
-#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
-#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
-#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
-#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
-#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
-#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
-#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
-#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
-#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
-#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
-#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
-#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
-#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
-#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
-#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
-#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
-#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
-#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
-#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
-#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
-#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
-#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
-#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
-#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
-#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
-#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
-#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
-#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
-#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
-#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
-#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
-#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
-#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
-#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
-#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
-#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
-#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
-#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
-#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
-#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
-#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
-#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
-#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
-#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
-#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
-#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
-#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
-#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
-#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
-#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
-#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
-#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
-#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
-#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
-#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
-#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
-#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
-#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
-#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
-#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
-#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
-#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
-#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
-#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
-#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
-#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
-#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
-#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
-#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
-#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
-#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
-#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
-#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
-#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
-#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
-#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
-#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
-#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
-#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
-#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
-#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
-#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
-#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
-#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
-#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
-#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
-#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
-#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
-#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
-#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
-#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
-#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
-#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
-#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
-#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
-#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
-#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
-#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
-#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
-#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
-#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
-#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
-#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
-#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
-#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
-#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
-#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
-#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
-#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
-#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
-#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
-#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
-#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
-#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
-#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
-#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
-#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
-#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
-#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
-#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
-#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
-#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
-#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
-#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
-#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
-#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
-#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
-#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
-#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
-#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
-#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
-#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
-#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
-#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
-#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
-#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
-#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
-#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
-#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
-#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
-#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
-#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
-#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
-#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
-#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
-#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
-#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
-#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
-#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
-#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
-#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
-#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
-#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
-#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
-#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
-#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
-#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
-#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
-#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
-#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
-#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
-#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
-#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
-#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
-#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
-#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
-#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
-#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
-#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
-#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
-#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
-#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
-#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
-#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
-#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
-#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
-#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
-#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
-#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
-#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
-#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
-#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
-#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
-#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
-#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
-#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
-#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
-#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
-#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
-#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
-#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
-#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
-#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
-#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
-#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
-#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
-#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
-#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
-#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
-#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
-#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
-#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
-#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
-#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
-#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
-#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
-#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
-#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
-#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
-#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
-#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
-#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
-#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
-#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
-#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
-#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
-#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
-#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
-#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
-#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
-#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
-#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
-#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
-#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
-#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
-#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
-#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
-#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
-#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
-#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
-#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
-#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
-#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
-#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
-#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
-#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
-#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
-#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
-#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
-#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
-#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
-#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
-#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
-#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
-#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
-#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
-#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
-#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
-#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
-#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
-#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
-#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
-#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
-#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
-#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
-#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
-#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
-#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
-#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
-#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
-#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
-#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
-#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
-#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
-#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
-#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
-#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
-#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
-#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
-#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
-#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
-#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
-#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
-#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
-#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
-#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
-#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
-#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
-#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
-#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
-#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
-#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
-#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
-#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
-#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
-#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
-#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
-#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
-#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
-#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
-#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
-#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
-#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
-#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
-#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
-#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
-#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
-#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
-#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
-#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
-#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
-#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
-#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
-#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
-#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
-#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
-#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
-#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
-#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
-#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
-#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
-#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
-#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
-#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
-#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
-#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
-#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
-#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
-#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
-
-#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/src/arm/imx50.dtsi b/src/arm/imx50.dtsi
deleted file mode 100644
index c0e0f60ab6b2..000000000000
--- a/src/arm/imx50.dtsi
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx50-pinfunc.h"
-#include <dt-bindings/clock/imx5-clock.h>
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	tzic: tz-interrupt-controller@0fffc000 {
-		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x0fffc000 0x4000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <22579200>;
-		};
-
-		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&tzic>;
-		ranges;
-
-		aips@50000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x10000000>;
-			ranges;
-
-			spba@50000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x50000000 0x40000>;
-				ranges;
-
-				esdhc1: esdhc@50004000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50004000 0x4000>;
-					interrupts = <1>;
-					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc2: esdhc@50008000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50008000 0x4000>;
-					interrupts = <2>;
-					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				uart3: serial@5000c000 {
-					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-					reg = <0x5000c000 0x4000>;
-					interrupts = <33>;
-					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi1: ecspi@50010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
-					reg = <0x50010000 0x4000>;
-					interrupts = <36>;
-					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ssi2: ssi@50014000 {
-					compatible = "fsl,imx50-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
-					reg = <0x50014000 0x4000>;
-					interrupts = <30>;
-					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
-					dmas = <&sdma 24 1 0>,
-					       <&sdma 25 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				esdhc3: esdhc@50020000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50020000 0x4000>;
-					interrupts = <3>;
-					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc4: esdhc@50024000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50024000 0x4000>;
-					interrupts = <4>;
-					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-			};
-
-			usbotg: usb@53f80000 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80000 0x0200>;
-				interrupts = <18>;
-				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
-				status = "disabled";
-			};
-
-			usbh1: usb@53f80200 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80200 0x0200>;
-				interrupts = <14>;
-				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
-				status = "disabled";
-			};
-
-			usbh2: usb@53f80400 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80400 0x0200>;
-				interrupts = <16>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				status = "disabled";
-			};
-
-			usbh3: usb@53f80600 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80600 0x0200>;
-				interrupts = <17>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@53f84000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f84000 0x4000>;
-				interrupts = <50 51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53f88000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f88000 0x4000>;
-				interrupts = <52 53>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@53f8c000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f8c000 0x4000>;
-				interrupts = <54 55>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@53f90000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <56 57>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			wdog1: wdog@53f98000 {
-				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
-				reg = <0x53f98000 0x4000>;
-				interrupts = <58>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-			};
-
-			gpt: timer@53fa0000 {
-				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
-				reg = <0x53fa0000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			iomuxc: iomuxc@53fa8000 {
-				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@53fa8000 {
-				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
-				reg = <0x53fa8000 0xc>;
-			};
-
-			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb4000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <61>;
-			};
-
-			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb8000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <94>;
-			};
-
-			uart1: serial@53fbc000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <31>;
-				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@53fc0000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			src: src@53fd0000 {
-				compatible = "fsl,imx50-src", "fsl,imx51-src";
-				reg = <0x53fd0000 0x4000>;
-				#reset-cells = <1>;
-			};
-
-			clks: ccm@53fd4000{
-				compatible = "fsl,imx50-ccm";
-				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
-				#clock-cells = <1>;
-			};
-
-			gpio5: gpio@53fdc000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53fdc000 0x4000>;
-				interrupts = <103 104>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@53fe0000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53fe0000 0x4000>;
-				interrupts = <105 106>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c3: i2c@53fec000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x53fec000 0x4000>;
-				interrupts = <64>;
-				clocks = <&clks IMX5_CLK_I2C3_GATE>;
-				status = "disabled";
-			};
-
-			uart4: serial@53ff0000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x60000000 0x10000000>;
-			ranges;
-
-			uart5: serial@63f90000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x63f90000 0x4000>;
-				interrupts = <86>;
-				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			owire: owire@63fa4000 {
-				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
-				reg = <0x63fa4000 0x4000>;
-				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
-				status = "disabled";
-			};
-
-			ecspi2: ecspi@63fac000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
-				reg = <0x63fac000 0x4000>;
-				interrupts = <37>;
-				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			sdma: sdma@63fb0000 {
-				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
-				reg = <0x63fb0000 0x4000>;
-				interrupts = <6>;
-				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
-				clock-names = "ipg", "ahb";
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
-			};
-
-			cspi: cspi@63fc0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
-				reg = <0x63fc0000 0x4000>;
-				interrupts = <38>;
-				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@63fc4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc4000 0x4000>;
-				interrupts = <63>;
-				clocks = <&clks IMX5_CLK_I2C2_GATE>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@63fc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc8000 0x4000>;
-				interrupts = <62>;
-				clocks = <&clks IMX5_CLK_I2C1_GATE>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@63fcc000 {
-				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
-							"fsl,imx21-ssi";
-				reg = <0x63fcc000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			audmux: audmux@63fd0000 {
-				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
-				reg = <0x63fd0000 0x4000>;
-				status = "disabled";
-			};
-
-			fec: ethernet@63fec000 {
-				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
-				reg = <0x63fec000 0x4000>;
-				interrupts = <87>;
-				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/imx51-pinfunc.h b/src/arm/imx51-pinfunc.h
deleted file mode 100644
index 9eb92abaeb6d..000000000000
--- a/src/arm/imx51-pinfunc.h
+++ /dev/null
@@ -1,773 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX51_PINFUNC_H
-#define __DTS_IMX51_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX51_PAD_EIM_D16__AUD4_RXFS			0x05c 0x3f0 0x000 0x5 0x0
-#define MX51_PAD_EIM_D16__AUD5_TXD			0x05c 0x3f0 0x8d8 0x7 0x0
-#define MX51_PAD_EIM_D16__EIM_D16			0x05c 0x3f0 0x000 0x0 0x0
-#define MX51_PAD_EIM_D16__GPIO2_0			0x05c 0x3f0 0x000 0x1 0x0
-#define MX51_PAD_EIM_D16__I2C1_SDA			0x05c 0x3f0 0x9b4 0x4 0x0
-#define MX51_PAD_EIM_D16__UART2_CTS			0x05c 0x3f0 0x000 0x3 0x0
-#define MX51_PAD_EIM_D16__USBH2_DATA0			0x05c 0x3f0 0x000 0x2 0x0
-#define MX51_PAD_EIM_D17__AUD5_RXD			0x060 0x3f4 0x8d4 0x7 0x0
-#define MX51_PAD_EIM_D17__EIM_D17			0x060 0x3f4 0x000 0x0 0x0
-#define MX51_PAD_EIM_D17__GPIO2_1			0x060 0x3f4 0x000 0x1 0x0
-#define MX51_PAD_EIM_D17__UART2_RXD			0x060 0x3f4 0x9ec 0x3 0x0
-#define MX51_PAD_EIM_D17__UART3_CTS			0x060 0x3f4 0x000 0x4 0x0
-#define MX51_PAD_EIM_D17__USBH2_DATA1			0x060 0x3f4 0x000 0x2 0x0
-#define MX51_PAD_EIM_D18__AUD5_TXC			0x064 0x3f8 0x8e4 0x7 0x0
-#define MX51_PAD_EIM_D18__EIM_D18			0x064 0x3f8 0x000 0x0 0x0
-#define MX51_PAD_EIM_D18__GPIO2_2			0x064 0x3f8 0x000 0x1 0x0
-#define MX51_PAD_EIM_D18__UART2_TXD			0x064 0x3f8 0x000 0x3 0x0
-#define MX51_PAD_EIM_D18__UART3_RTS			0x064 0x3f8 0x9f0 0x4 0x1
-#define MX51_PAD_EIM_D18__USBH2_DATA2			0x064 0x3f8 0x000 0x2 0x0
-#define MX51_PAD_EIM_D19__AUD4_RXC			0x068 0x3fc 0x000 0x5 0x0
-#define MX51_PAD_EIM_D19__AUD5_TXFS			0x068 0x3fc 0x8e8 0x7 0x0
-#define MX51_PAD_EIM_D19__EIM_D19			0x068 0x3fc 0x000 0x0 0x0
-#define MX51_PAD_EIM_D19__GPIO2_3			0x068 0x3fc 0x000 0x1 0x0
-#define MX51_PAD_EIM_D19__I2C1_SCL			0x068 0x3fc 0x9b0 0x4 0x0
-#define MX51_PAD_EIM_D19__UART2_RTS			0x068 0x3fc 0x9e8 0x3 0x1
-#define MX51_PAD_EIM_D19__USBH2_DATA3			0x068 0x3fc 0x000 0x2 0x0
-#define MX51_PAD_EIM_D20__AUD4_TXD			0x06c 0x400 0x8c8 0x5 0x0
-#define MX51_PAD_EIM_D20__EIM_D20			0x06c 0x400 0x000 0x0 0x0
-#define MX51_PAD_EIM_D20__GPIO2_4			0x06c 0x400 0x000 0x1 0x0
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB		0x06c 0x400 0x000 0x4 0x0
-#define MX51_PAD_EIM_D20__USBH2_DATA4			0x06c 0x400 0x000 0x2 0x0
-#define MX51_PAD_EIM_D21__AUD4_RXD			0x070 0x404 0x8c4 0x5 0x0
-#define MX51_PAD_EIM_D21__EIM_D21			0x070 0x404 0x000 0x0 0x0
-#define MX51_PAD_EIM_D21__GPIO2_5			0x070 0x404 0x000 0x1 0x0
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB		0x070 0x404 0x000 0x3 0x0
-#define MX51_PAD_EIM_D21__USBH2_DATA5			0x070 0x404 0x000 0x2 0x0
-#define MX51_PAD_EIM_D22__AUD4_TXC			0x074 0x408 0x8cc 0x5 0x0
-#define MX51_PAD_EIM_D22__EIM_D22			0x074 0x408 0x000 0x0 0x0
-#define MX51_PAD_EIM_D22__GPIO2_6			0x074 0x408 0x000 0x1 0x0
-#define MX51_PAD_EIM_D22__USBH2_DATA6			0x074 0x408 0x000 0x2 0x0
-#define MX51_PAD_EIM_D23__AUD4_TXFS			0x078 0x40c 0x8d0 0x5 0x0
-#define MX51_PAD_EIM_D23__EIM_D23			0x078 0x40c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D23__GPIO2_7			0x078 0x40c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D23__SPDIF_OUT1			0x078 0x40c 0x000 0x4 0x0
-#define MX51_PAD_EIM_D23__USBH2_DATA7			0x078 0x40c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D24__AUD6_RXFS			0x07c 0x410 0x8f8 0x5 0x0
-#define MX51_PAD_EIM_D24__EIM_D24			0x07c 0x410 0x000 0x0 0x0
-#define MX51_PAD_EIM_D24__GPIO2_8			0x07c 0x410 0x000 0x1 0x0
-#define MX51_PAD_EIM_D24__I2C2_SDA			0x07c 0x410 0x9bc 0x4 0x0
-#define MX51_PAD_EIM_D24__UART3_CTS			0x07c 0x410 0x000 0x3 0x0
-#define MX51_PAD_EIM_D24__USBOTG_DATA0			0x07c 0x410 0x000 0x2 0x0
-#define MX51_PAD_EIM_D25__EIM_D25			0x080 0x414 0x000 0x0 0x0
-#define MX51_PAD_EIM_D25__KEY_COL6			0x080 0x414 0x9c8 0x1 0x0
-#define MX51_PAD_EIM_D25__UART2_CTS			0x080 0x414 0x000 0x4 0x0
-#define MX51_PAD_EIM_D25__UART3_RXD			0x080 0x414 0x9f4 0x3 0x0
-#define MX51_PAD_EIM_D25__USBOTG_DATA1			0x080 0x414 0x000 0x2 0x0
-#define MX51_PAD_EIM_D26__EIM_D26			0x084 0x418 0x000 0x0 0x0
-#define MX51_PAD_EIM_D26__KEY_COL7			0x084 0x418 0x9cc 0x1 0x0
-#define MX51_PAD_EIM_D26__UART2_RTS			0x084 0x418 0x9e8 0x4 0x3
-#define MX51_PAD_EIM_D26__UART3_TXD			0x084 0x418 0x000 0x3 0x0
-#define MX51_PAD_EIM_D26__USBOTG_DATA2			0x084 0x418 0x000 0x2 0x0
-#define MX51_PAD_EIM_D27__AUD6_RXC			0x088 0x41c 0x8f4 0x5 0x0
-#define MX51_PAD_EIM_D27__EIM_D27			0x088 0x41c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D27__GPIO2_9			0x088 0x41c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D27__I2C2_SCL			0x088 0x41c 0x9b8 0x4 0x0
-#define MX51_PAD_EIM_D27__UART3_RTS			0x088 0x41c 0x9f0 0x3 0x3
-#define MX51_PAD_EIM_D27__USBOTG_DATA3			0x088 0x41c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D28__AUD6_TXD			0x08c 0x420 0x8f0 0x5 0x0
-#define MX51_PAD_EIM_D28__EIM_D28			0x08c 0x420 0x000 0x0 0x0
-#define MX51_PAD_EIM_D28__KEY_ROW4			0x08c 0x420 0x9d0 0x1 0x0
-#define MX51_PAD_EIM_D28__USBOTG_DATA4			0x08c 0x420 0x000 0x2 0x0
-#define MX51_PAD_EIM_D29__AUD6_RXD			0x090 0x424 0x8ec 0x5 0x0
-#define MX51_PAD_EIM_D29__EIM_D29			0x090 0x424 0x000 0x0 0x0
-#define MX51_PAD_EIM_D29__KEY_ROW5			0x090 0x424 0x9d4 0x1 0x0
-#define MX51_PAD_EIM_D29__USBOTG_DATA5			0x090 0x424 0x000 0x2 0x0
-#define MX51_PAD_EIM_D30__AUD6_TXC			0x094 0x428 0x8fc 0x5 0x0
-#define MX51_PAD_EIM_D30__EIM_D30			0x094 0x428 0x000 0x0 0x0
-#define MX51_PAD_EIM_D30__KEY_ROW6			0x094 0x428 0x9d8 0x1 0x0
-#define MX51_PAD_EIM_D30__USBOTG_DATA6			0x094 0x428 0x000 0x2 0x0
-#define MX51_PAD_EIM_D31__AUD6_TXFS			0x098 0x42c 0x900 0x5 0x0
-#define MX51_PAD_EIM_D31__EIM_D31			0x098 0x42c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D31__KEY_ROW7			0x098 0x42c 0x9dc 0x1 0x0
-#define MX51_PAD_EIM_D31__USBOTG_DATA7			0x098 0x42c 0x000 0x2 0x0
-#define MX51_PAD_EIM_A16__EIM_A16			0x09c 0x430 0x000 0x0 0x0
-#define MX51_PAD_EIM_A16__GPIO2_10			0x09c 0x430 0x000 0x1 0x0
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0			0x09c 0x430 0x000 0x7 0x0
-#define MX51_PAD_EIM_A17__EIM_A17			0x0a0 0x434 0x000 0x0 0x0
-#define MX51_PAD_EIM_A17__GPIO2_11			0x0a0 0x434 0x000 0x1 0x0
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1			0x0a0 0x434 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__BOOT_LPB0			0x0a4 0x438 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__EIM_A18			0x0a4 0x438 0x000 0x0 0x0
-#define MX51_PAD_EIM_A18__GPIO2_12			0x0a4 0x438 0x000 0x1 0x0
-#define MX51_PAD_EIM_A19__BOOT_LPB1			0x0a8 0x43c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A19__EIM_A19			0x0a8 0x43c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A19__GPIO2_13			0x0a8 0x43c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0		0x0ac 0x440 0x000 0x7 0x0
-#define MX51_PAD_EIM_A20__EIM_A20			0x0ac 0x440 0x000 0x0 0x0
-#define MX51_PAD_EIM_A20__GPIO2_14			0x0ac 0x440 0x000 0x1 0x0
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1		0x0b0 0x444 0x000 0x7 0x0
-#define MX51_PAD_EIM_A21__EIM_A21			0x0b0 0x444 0x000 0x0 0x0
-#define MX51_PAD_EIM_A21__GPIO2_15			0x0b0 0x444 0x000 0x1 0x0
-#define MX51_PAD_EIM_A22__EIM_A22			0x0b4 0x448 0x000 0x0 0x0
-#define MX51_PAD_EIM_A22__GPIO2_16			0x0b4 0x448 0x000 0x1 0x0
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN			0x0b8 0x44c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A23__EIM_A23			0x0b8 0x44c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A23__GPIO2_17			0x0b8 0x44c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__EIM_A24			0x0bc 0x450 0x000 0x0 0x0
-#define MX51_PAD_EIM_A24__GPIO2_18			0x0bc 0x450 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__USBH2_CLK			0x0bc 0x450 0x000 0x2 0x0
-#define MX51_PAD_EIM_A25__DISP1_PIN4			0x0c0 0x454 0x000 0x6 0x0
-#define MX51_PAD_EIM_A25__EIM_A25			0x0c0 0x454 0x000 0x0 0x0
-#define MX51_PAD_EIM_A25__GPIO2_19			0x0c0 0x454 0x000 0x1 0x0
-#define MX51_PAD_EIM_A25__USBH2_DIR			0x0c0 0x454 0x000 0x2 0x0
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN			0x0c4 0x458 0x9a0 0x5 0x0
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK			0x0c4 0x458 0x908 0x6 0x0
-#define MX51_PAD_EIM_A26__EIM_A26			0x0c4 0x458 0x000 0x0 0x0
-#define MX51_PAD_EIM_A26__GPIO2_20			0x0c4 0x458 0x000 0x1 0x0
-#define MX51_PAD_EIM_A26__USBH2_STP			0x0c4 0x458 0x000 0x2 0x0
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN			0x0c8 0x45c 0x99c 0x5 0x0
-#define MX51_PAD_EIM_A27__DISP1_PIN1			0x0c8 0x45c 0x9a4 0x6 0x0
-#define MX51_PAD_EIM_A27__EIM_A27			0x0c8 0x45c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A27__GPIO2_21			0x0c8 0x45c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A27__USBH2_NXT			0x0c8 0x45c 0x000 0x2 0x0
-#define MX51_PAD_EIM_EB0__EIM_EB0			0x0cc 0x460 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB1__EIM_EB1			0x0d0 0x464 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__AUD5_RXFS			0x0d4 0x468 0x8e0 0x6 0x0
-#define MX51_PAD_EIM_EB2__CSI1_D2			0x0d4 0x468 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB2__EIM_EB2			0x0d4 0x468 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__FEC_MDIO			0x0d4 0x468 0x954 0x3 0x0
-#define MX51_PAD_EIM_EB2__GPIO2_22			0x0d4 0x468 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1			0x0d4 0x468 0x000 0x7 0x0
-#define MX51_PAD_EIM_EB3__AUD5_RXC			0x0d8 0x46c 0x8dc 0x6 0x0
-#define MX51_PAD_EIM_EB3__CSI1_D3			0x0d8 0x46c 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB3__EIM_EB3			0x0d8 0x46c 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB3__FEC_RDATA1			0x0d8 0x46c 0x95c 0x3 0x0
-#define MX51_PAD_EIM_EB3__GPIO2_23			0x0d8 0x46c 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2			0x0d8 0x46c 0x000 0x7 0x0
-#define MX51_PAD_EIM_OE__EIM_OE				0x0dc 0x470 0x000 0x0 0x0
-#define MX51_PAD_EIM_OE__GPIO2_24			0x0dc 0x470 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS0__EIM_CS0			0x0e0 0x474 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS0__GPIO2_25			0x0e0 0x474 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS1__EIM_CS1			0x0e4 0x478 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS1__GPIO2_26			0x0e4 0x478 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__AUD5_TXD			0x0e8 0x47c 0x8d8 0x6 0x1
-#define MX51_PAD_EIM_CS2__CSI1_D4			0x0e8 0x47c 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS2__EIM_CS2			0x0e8 0x47c 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS2__FEC_RDATA2			0x0e8 0x47c 0x960 0x3 0x0
-#define MX51_PAD_EIM_CS2__GPIO2_27			0x0e8 0x47c 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__USBOTG_STP			0x0e8 0x47c 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS3__AUD5_RXD			0x0ec 0x480 0x8d4 0x6 0x1
-#define MX51_PAD_EIM_CS3__CSI1_D5			0x0ec 0x480 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS3__EIM_CS3			0x0ec 0x480 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS3__FEC_RDATA3			0x0ec 0x480 0x964 0x3 0x0
-#define MX51_PAD_EIM_CS3__GPIO2_28			0x0ec 0x480 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS3__USBOTG_NXT			0x0ec 0x480 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS4__AUD5_TXC			0x0f0 0x484 0x8e4 0x6 0x1
-#define MX51_PAD_EIM_CS4__CSI1_D6			0x0f0 0x484 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS4__EIM_CS4			0x0f0 0x484 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS4__FEC_RX_ER			0x0f0 0x484 0x970 0x3 0x0
-#define MX51_PAD_EIM_CS4__GPIO2_29			0x0f0 0x484 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS4__USBOTG_CLK			0x0f0 0x484 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS5__AUD5_TXFS			0x0f4 0x488 0x8e8 0x6 0x1
-#define MX51_PAD_EIM_CS5__CSI1_D7			0x0f4 0x488 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK			0x0f4 0x488 0x904 0x4 0x0
-#define MX51_PAD_EIM_CS5__EIM_CS5			0x0f4 0x488 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS5__FEC_CRS			0x0f4 0x488 0x950 0x3 0x0
-#define MX51_PAD_EIM_CS5__GPIO2_30			0x0f4 0x488 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS5__USBOTG_DIR			0x0f4 0x488 0x000 0x2 0x0
-#define MX51_PAD_EIM_DTACK__EIM_DTACK			0x0f8 0x48c 0x000 0x0 0x0
-#define MX51_PAD_EIM_DTACK__GPIO2_31			0x0f8 0x48c 0x000 0x1 0x0
-#define MX51_PAD_EIM_LBA__EIM_LBA			0x0fc 0x494 0x000 0x0 0x0
-#define MX51_PAD_EIM_LBA__GPIO3_1			0x0fc 0x494 0x978 0x1 0x0
-#define MX51_PAD_EIM_CRE__EIM_CRE			0x100 0x4a0 0x000 0x0 0x0
-#define MX51_PAD_EIM_CRE__GPIO3_2			0x100 0x4a0 0x97c 0x1 0x0
-#define MX51_PAD_DRAM_CS1__DRAM_CS1			0x104 0x4d0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__GPIO3_3			0x108 0x4e4 0x980 0x3 0x0
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B			0x108 0x4e4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW			0x108 0x4e4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0			0x108 0x4e4 0x93c 0x2 0x0
-#define MX51_PAD_NANDF_RE_B__GPIO3_4			0x10c 0x4e8 0x984 0x3 0x0
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B			0x10c 0x4e8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR			0x10c 0x4e8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1			0x10c 0x4e8 0x940 0x2 0x0
-#define MX51_PAD_NANDF_ALE__GPIO3_5			0x110 0x4ec 0x988 0x3 0x0
-#define MX51_PAD_NANDF_ALE__NANDF_ALE			0x110 0x4ec 0x000 0x0 0x0
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN		0x110 0x4ec 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CLE__GPIO3_6			0x114 0x4f0 0x98c 0x3 0x0
-#define MX51_PAD_NANDF_CLE__NANDF_CLE			0x114 0x4f0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B		0x114 0x4f0 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__GPIO3_7			0x118 0x4f4 0x990 0x3 0x0
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B			0x118 0x4f4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK			0x118 0x4f4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2			0x118 0x4f4 0x944 0x2 0x0
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1			0x11c 0x4f8 0x930 0x5 0x0
-#define MX51_PAD_NANDF_RB0__GPIO3_8			0x11c 0x4f8 0x994 0x3 0x0
-#define MX51_PAD_NANDF_RB0__NANDF_RB0			0x11c 0x4f8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ			0x11c 0x4f8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB0__SD3_DATA3			0x11c 0x4f8 0x948 0x2 0x0
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI			0x120 0x4fc 0x91c 0x6 0x0
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY			0x120 0x4fc 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB1__GPIO3_9			0x120 0x4fc 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB1__NANDF_RB1			0x120 0x4fc 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB1__PATA_IORDY			0x120 0x4fc 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB1__SD4_CMD			0x120 0x4fc 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT			0x124 0x500 0x9a8 0x5 0x0
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK			0x124 0x500 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB2__FEC_COL			0x124 0x500 0x94c 0x1 0x0
-#define MX51_PAD_NANDF_RB2__GPIO3_10			0x124 0x500 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB2__NANDF_RB2			0x124 0x500 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP			0x124 0x500 0x000 0x7 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_NXT			0x124 0x500 0xa20 0x6 0x0
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT			0x128 0x504 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO			0x128 0x504 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK			0x128 0x504 0x968 0x1 0x0
-#define MX51_PAD_NANDF_RB3__GPIO3_11			0x128 0x504 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB3__NANDF_RB3			0x128 0x504 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_CLK			0x128 0x504 0x9f8 0x6 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM			0x128 0x504 0x000 0x7 0x0
-#define MX51_PAD_GPIO_NAND__GPIO_NAND			0x12c 0x514 0x998 0x0 0x0
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ			0x12c 0x514 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS0__GPIO3_16			0x130 0x518 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS0__NANDF_CS0			0x130 0x518 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS1__GPIO3_17			0x134 0x51c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS1__NANDF_CS1			0x134 0x51c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK			0x138 0x520 0x914 0x6 0x0
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER			0x138 0x520 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS2__GPIO3_18			0x138 0x520 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS2__NANDF_CS2			0x138 0x520 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__PATA_CS_0			0x138 0x520 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS2__SD4_CLK			0x138 0x520 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP			0x138 0x520 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS3__FEC_MDC			0x13c 0x524 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS3__GPIO3_19			0x13c 0x524 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS3__NANDF_CS3			0x13c 0x524 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS3__PATA_CS_1			0x13c 0x524 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS3__SD4_DAT0			0x13c 0x524 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM			0x13c 0x524 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1			0x140 0x528 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS4__GPIO3_20			0x140 0x528 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS4__NANDF_CS4			0x140 0x528 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS4__PATA_DA_0			0x140 0x528 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS4__SD4_DAT1			0x140 0x528 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS4__USBH3_STP			0x140 0x528 0xa24 0x7 0x0
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2			0x144 0x52c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS5__GPIO3_21			0x144 0x52c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS5__NANDF_CS5			0x144 0x52c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS5__PATA_DA_1			0x144 0x52c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS5__SD4_DAT2			0x144 0x52c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS5__USBH3_DIR			0x144 0x52c 0xa1c 0x7 0x0
-#define MX51_PAD_NANDF_CS6__CSPI_SS3			0x148 0x530 0x928 0x7 0x0
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3			0x148 0x530 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS6__GPIO3_22			0x148 0x530 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS6__NANDF_CS6			0x148 0x530 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS6__PATA_DA_2			0x148 0x530 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS6__SD4_DAT3			0x148 0x530 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN			0x14c 0x534 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS7__GPIO3_23			0x14c 0x534 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS7__NANDF_CS7			0x14c 0x534 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS7__SD3_CLK			0x14c 0x534 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0		0x150 0x538 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		0x150 0x538 0x974 0x1 0x0
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24		0x150 0x538 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		0x150 0x538 0x938 0x0 0x0
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD			0x150 0x538 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI			0x154 0x53c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D15__GPIO3_25			0x154 0x53c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D15__NANDF_D15			0x154 0x53c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D15__PATA_DATA15			0x154 0x53c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D15__SD3_DAT7			0x154 0x53c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3			0x158 0x540 0x934 0x2 0x0
-#define MX51_PAD_NANDF_D14__GPIO3_26			0x158 0x540 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D14__NANDF_D14			0x158 0x540 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D14__PATA_DATA14			0x158 0x540 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D14__SD3_DAT6			0x158 0x540 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2			0x15c 0x544 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D13__GPIO3_27			0x15c 0x544 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D13__NANDF_D13			0x15c 0x544 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D13__PATA_DATA13			0x15c 0x544 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D13__SD3_DAT5			0x15c 0x544 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1			0x160 0x548 0x930 0x2 0x1
-#define MX51_PAD_NANDF_D12__GPIO3_28			0x160 0x548 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D12__NANDF_D12			0x160 0x548 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D12__PATA_DATA12			0x160 0x548 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D12__SD3_DAT4			0x160 0x548 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D11__FEC_RX_DV			0x164 0x54c 0x96c 0x2 0x0
-#define MX51_PAD_NANDF_D11__GPIO3_29			0x164 0x54c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D11__NANDF_D11			0x164 0x54c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D11__PATA_DATA11			0x164 0x54c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D11__SD3_DATA3			0x164 0x54c 0x948 0x5 0x1
-#define MX51_PAD_NANDF_D10__GPIO3_30			0x168 0x550 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D10__NANDF_D10			0x168 0x550 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D10__PATA_DATA10			0x168 0x550 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D10__SD3_DATA2			0x168 0x550 0x944 0x5 0x1
-#define MX51_PAD_NANDF_D9__FEC_RDATA0			0x16c 0x554 0x958 0x2 0x0
-#define MX51_PAD_NANDF_D9__GPIO3_31			0x16c 0x554 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D9__NANDF_D9			0x16c 0x554 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D9__PATA_DATA9			0x16c 0x554 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D9__SD3_DATA1			0x16c 0x554 0x940 0x5 0x1
-#define MX51_PAD_NANDF_D8__FEC_TDATA0			0x170 0x558 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D8__GPIO4_0			0x170 0x558 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D8__NANDF_D8			0x170 0x558 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D8__PATA_DATA8			0x170 0x558 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D8__SD3_DATA0			0x170 0x558 0x93c 0x5 0x1
-#define MX51_PAD_NANDF_D7__GPIO4_1			0x174 0x55c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D7__NANDF_D7			0x174 0x55c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D7__PATA_DATA7			0x174 0x55c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D7__USBH3_DATA0			0x174 0x55c 0x9fc 0x5 0x0
-#define MX51_PAD_NANDF_D6__GPIO4_2			0x178 0x560 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D6__NANDF_D6			0x178 0x560 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D6__PATA_DATA6			0x178 0x560 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D6__SD4_LCTL			0x178 0x560 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D6__USBH3_DATA1			0x178 0x560 0xa00 0x5 0x0
-#define MX51_PAD_NANDF_D5__GPIO4_3			0x17c 0x564 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D5__NANDF_D5			0x17c 0x564 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D5__PATA_DATA5			0x17c 0x564 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D5__SD4_WP			0x17c 0x564 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D5__USBH3_DATA2			0x17c 0x564 0xa04 0x5 0x0
-#define MX51_PAD_NANDF_D4__GPIO4_4			0x180 0x568 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D4__NANDF_D4			0x180 0x568 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D4__PATA_DATA4			0x180 0x568 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D4__SD4_CD			0x180 0x568 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D4__USBH3_DATA3			0x180 0x568 0xa08 0x5 0x0
-#define MX51_PAD_NANDF_D3__GPIO4_5			0x184 0x56c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D3__NANDF_D3			0x184 0x56c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D3__PATA_DATA3			0x184 0x56c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D3__SD4_DAT4			0x184 0x56c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D3__USBH3_DATA4			0x184 0x56c 0xa0c 0x5 0x0
-#define MX51_PAD_NANDF_D2__GPIO4_6			0x188 0x570 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D2__NANDF_D2			0x188 0x570 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D2__PATA_DATA2			0x188 0x570 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D2__SD4_DAT5			0x188 0x570 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D2__USBH3_DATA5			0x188 0x570 0xa10 0x5 0x0
-#define MX51_PAD_NANDF_D1__GPIO4_7			0x18c 0x574 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D1__NANDF_D1			0x18c 0x574 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D1__PATA_DATA1			0x18c 0x574 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D1__SD4_DAT6			0x18c 0x574 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D1__USBH3_DATA6			0x18c 0x574 0xa14 0x5 0x0
-#define MX51_PAD_NANDF_D0__GPIO4_8			0x190 0x578 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D0__NANDF_D0			0x190 0x578 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D0__PATA_DATA0			0x190 0x578 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D0__SD4_DAT7			0x190 0x578 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D0__USBH3_DATA7			0x190 0x578 0xa18 0x5 0x0
-#define MX51_PAD_CSI1_D8__CSI1_D8			0x194 0x57c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D8__GPIO3_12			0x194 0x57c 0x998 0x3 0x1
-#define MX51_PAD_CSI1_D9__CSI1_D9			0x198 0x580 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D9__GPIO3_13			0x198 0x580 0x000 0x3 0x0
-#define MX51_PAD_CSI1_D10__CSI1_D10			0x19c 0x584 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D11__CSI1_D11			0x1a0 0x588 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D12__CSI1_D12			0x1a4 0x58c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D13__CSI1_D13			0x1a8 0x590 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D14__CSI1_D14			0x1ac 0x594 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D15__CSI1_D15			0x1b0 0x598 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D16__CSI1_D16			0x1b4 0x59c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D17__CSI1_D17			0x1b8 0x5a0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D18__CSI1_D18			0x1bc 0x5a4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D19__CSI1_D19			0x1c0 0x5a8 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC			0x1c4 0x5ac 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14			0x1c4 0x5ac 0x000 0x3 0x0
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC			0x1c8 0x5b0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15			0x1c8 0x5b0 0x000 0x3 0x0
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK		0x000 0x5b4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK			0x000 0x5b8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__CSI2_D12			0x1cc 0x5bc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__GPIO4_9			0x1cc 0x5bc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D13__CSI2_D13			0x1d0 0x5c0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D13__GPIO4_10			0x1d0 0x5c0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D14__CSI2_D14			0x1d4 0x5c4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D15__CSI2_D15			0x1d8 0x5c8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D16__CSI2_D16			0x1dc 0x5cc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D17__CSI2_D17			0x1e0 0x5d0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__CSI2_D18			0x1e4 0x5d4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__GPIO4_11			0x1e4 0x5d4 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D19__CSI2_D19			0x1e8 0x5d8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D19__GPIO4_12			0x1e8 0x5d8 0x000 0x3 0x0
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC			0x1ec 0x5dc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13			0x1ec 0x5dc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC			0x1f0 0x5e0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14			0x1f0 0x5e0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK		0x1f4 0x5e4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15			0x1f4 0x5e4 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__GPIO4_16			0x1f8 0x5e8 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__I2C1_CLK			0x1f8 0x5e8 0x000 0x0 0x0
-#define MX51_PAD_I2C1_DAT__GPIO4_17			0x1fc 0x5ec 0x000 0x3 0x0
-#define MX51_PAD_I2C1_DAT__I2C1_DAT			0x1fc 0x5ec 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD			0x200 0x5f0 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18			0x200 0x5f0 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD			0x204 0x5f4 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19			0x204 0x5f4 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD			0x204 0x5f4 0x9f4 0x1 0x2
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC			0x208 0x5f8 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20			0x208 0x5f8 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS			0x20c 0x5fc 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21			0x20c 0x5fc 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD			0x20c 0x5fc 0x000 0x1 0x0
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI		0x210 0x600 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22			0x210 0x600 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA			0x210 0x600 0x9b4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD			0x214 0x604 0x8c4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO		0x214 0x604 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MISO__GPIO4_23			0x214 0x604 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC			0x218 0x608 0x8cc 0x1 0x1
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0			0x218 0x608 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS0__GPIO4_24			0x218 0x608 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD			0x21c 0x60c 0x8c8 0x1 0x1
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1			0x21c 0x60c 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS1__GPIO4_25			0x21c 0x60c 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS			0x220 0x610 0x8d0 0x1 0x1
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY			0x220 0x610 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_RDY__GPIO4_26			0x220 0x610 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK		0x224 0x614 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27			0x224 0x614 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL			0x224 0x614 0x9b0 0x1 0x1
-#define MX51_PAD_UART1_RXD__GPIO4_28			0x228 0x618 0x000 0x3 0x0
-#define MX51_PAD_UART1_RXD__UART1_RXD			0x228 0x618 0x9e4 0x0 0x0
-#define MX51_PAD_UART1_TXD__GPIO4_29			0x22c 0x61c 0x000 0x3 0x0
-#define MX51_PAD_UART1_TXD__PWM2_PWMO			0x22c 0x61c 0x000 0x1 0x0
-#define MX51_PAD_UART1_TXD__UART1_TXD			0x22c 0x61c 0x000 0x0 0x0
-#define MX51_PAD_UART1_RTS__GPIO4_30			0x230 0x620 0x000 0x3 0x0
-#define MX51_PAD_UART1_RTS__UART1_RTS			0x230 0x620 0x9e0 0x0 0x0
-#define MX51_PAD_UART1_CTS__GPIO4_31			0x234 0x624 0x000 0x3 0x0
-#define MX51_PAD_UART1_CTS__UART1_CTS			0x234 0x624 0x000 0x0 0x0
-#define MX51_PAD_UART2_RXD__FIRI_TXD			0x238 0x628 0x000 0x1 0x0
-#define MX51_PAD_UART2_RXD__GPIO1_20			0x238 0x628 0x000 0x3 0x0
-#define MX51_PAD_UART2_RXD__UART2_RXD			0x238 0x628 0x9ec 0x0 0x2
-#define MX51_PAD_UART2_TXD__FIRI_RXD			0x23c 0x62c 0x000 0x1 0x0
-#define MX51_PAD_UART2_TXD__GPIO1_21			0x23c 0x62c 0x000 0x3 0x0
-#define MX51_PAD_UART2_TXD__UART2_TXD			0x23c 0x62c 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__CSI1_D0			0x240 0x630 0x000 0x2 0x0
-#define MX51_PAD_UART3_RXD__GPIO1_22			0x240 0x630 0x000 0x3 0x0
-#define MX51_PAD_UART3_RXD__UART1_DTR			0x240 0x630 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__UART3_RXD			0x240 0x630 0x9f4 0x1 0x4
-#define MX51_PAD_UART3_TXD__CSI1_D1			0x244 0x634 0x000 0x2 0x0
-#define MX51_PAD_UART3_TXD__GPIO1_23			0x244 0x634 0x000 0x3 0x0
-#define MX51_PAD_UART3_TXD__UART1_DSR			0x244 0x634 0x000 0x0 0x0
-#define MX51_PAD_UART3_TXD__UART3_TXD			0x244 0x634 0x000 0x1 0x0
-#define MX51_PAD_OWIRE_LINE__GPIO1_24			0x248 0x638 0x000 0x3 0x0
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE			0x248 0x638 0x000 0x0 0x0
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT			0x248 0x638 0x000 0x6 0x0
-#define MX51_PAD_KEY_ROW0__KEY_ROW0			0x24c 0x63c 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW1__KEY_ROW1			0x250 0x640 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW2__KEY_ROW2			0x254 0x644 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW3__KEY_ROW3			0x258 0x648 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__KEY_COL0			0x25c 0x64c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__PLL1_BYP			0x25c 0x64c 0x90c 0x7 0x0
-#define MX51_PAD_KEY_COL1__KEY_COL1			0x260 0x650 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL1__PLL2_BYP			0x260 0x650 0x910 0x7 0x0
-#define MX51_PAD_KEY_COL2__KEY_COL2			0x264 0x654 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL2__PLL3_BYP			0x264 0x654 0x000 0x7 0x0
-#define MX51_PAD_KEY_COL3__KEY_COL3			0x268 0x658 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__I2C2_SCL			0x26c 0x65c 0x9b8 0x3 0x1
-#define MX51_PAD_KEY_COL4__KEY_COL4			0x26c 0x65c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1			0x26c 0x65c 0x000 0x6 0x0
-#define MX51_PAD_KEY_COL4__UART1_RI			0x26c 0x65c 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL4__UART3_RTS			0x26c 0x65c 0x9f0 0x2 0x4
-#define MX51_PAD_KEY_COL5__I2C2_SDA			0x270 0x660 0x9bc 0x3 0x1
-#define MX51_PAD_KEY_COL5__KEY_COL5			0x270 0x660 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL5__UART1_DCD			0x270 0x660 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL5__UART3_CTS			0x270 0x660 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK			0x278 0x678 0x914 0x1 0x1
-#define MX51_PAD_USBH1_CLK__GPIO1_25			0x278 0x678 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__I2C2_SCL			0x278 0x678 0x9b8 0x5 0x2
-#define MX51_PAD_USBH1_CLK__USBH1_CLK			0x278 0x678 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI			0x27c 0x67c 0x91c 0x1 0x1
-#define MX51_PAD_USBH1_DIR__GPIO1_26			0x27c 0x67c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DIR__I2C2_SDA			0x27c 0x67c 0x9bc 0x5 0x2
-#define MX51_PAD_USBH1_DIR__USBH1_DIR			0x27c 0x67c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_STP__CSPI_RDY			0x280 0x680 0x000 0x1 0x0
-#define MX51_PAD_USBH1_STP__GPIO1_27			0x280 0x680 0x000 0x2 0x0
-#define MX51_PAD_USBH1_STP__UART3_RXD			0x280 0x680 0x9f4 0x5 0x6
-#define MX51_PAD_USBH1_STP__USBH1_STP			0x280 0x680 0x000 0x0 0x0
-#define MX51_PAD_USBH1_NXT__CSPI_MISO			0x284 0x684 0x918 0x1 0x0
-#define MX51_PAD_USBH1_NXT__GPIO1_28			0x284 0x684 0x000 0x2 0x0
-#define MX51_PAD_USBH1_NXT__UART3_TXD			0x284 0x684 0x000 0x5 0x0
-#define MX51_PAD_USBH1_NXT__USBH1_NXT			0x284 0x684 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA0__GPIO1_11			0x288 0x688 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA0__UART2_CTS			0x288 0x688 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0		0x288 0x688 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA1__GPIO1_12			0x28c 0x68c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA1__UART2_RXD			0x28c 0x68c 0x9ec 0x1 0x4
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1		0x28c 0x68c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA2__GPIO1_13			0x290 0x690 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA2__UART2_TXD			0x290 0x690 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2		0x290 0x690 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA3__GPIO1_14			0x294 0x694 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA3__UART2_RTS			0x294 0x694 0x9e8 0x1 0x5
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3		0x294 0x694 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0			0x298 0x698 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA4__GPIO1_15			0x298 0x698 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4		0x298 0x698 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1			0x29c 0x69c 0x920 0x1 0x0
-#define MX51_PAD_USBH1_DATA5__GPIO1_16			0x29c 0x69c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5		0x29c 0x69c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3			0x2a0 0x6a0 0x928 0x1 0x1
-#define MX51_PAD_USBH1_DATA6__GPIO1_17			0x2a0 0x6a0 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6		0x2a0 0x6a0 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3		0x2a4 0x6a4 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3		0x2a4 0x6a4 0x934 0x5 0x1
-#define MX51_PAD_USBH1_DATA7__GPIO1_18			0x2a4 0x6a4 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7		0x2a4 0x6a4 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__DI1_PIN11			0x2a8 0x6a8 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2			0x2a8 0x6a8 0x000 0x7 0x0
-#define MX51_PAD_DI1_PIN11__GPIO3_0			0x2a8 0x6a8 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN12__DI1_PIN12			0x2ac 0x6ac 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN12__GPIO3_1			0x2ac 0x6ac 0x978 0x4 0x1
-#define MX51_PAD_DI1_PIN13__DI1_PIN13			0x2b0 0x6b0 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN13__GPIO3_2			0x2b0 0x6b0 0x97c 0x4 0x1
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			0x2b4 0x6b4 0x000 0x0 0x0
-#define MX51_PAD_DI1_D0_CS__GPIO3_3			0x2b4 0x6b4 0x980 0x4 0x1
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS			0x2b8 0x6b8 0x000 0x0 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14			0x2b8 0x6b8 0x000 0x2 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5			0x2b8 0x6b8 0x000 0x3 0x0
-#define MX51_PAD_DI1_D1_CS__GPIO3_4			0x2b8 0x6b8 0x984 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1		0x2bc 0x6bc 0x9a4 0x2 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		0x2bc 0x6bc 0x9c4 0x0 0x0
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5		0x2bc 0x6bc 0x988 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6		0x2c0 0x6c0 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		0x2c0 0x6c0 0x9c4 0x0 0x1
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6		0x2c0 0x6c0 0x98c 0x4 0x1
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17		0x2c4 0x6c4 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK		0x2c8 0x6c8 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8			0x2c8 0x6c8 0x994 0x4 0x1
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0			0x2cc 0x6cc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1			0x2d0 0x6d0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2			0x2d4 0x6d4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3			0x2d8 0x6d8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4			0x2dc 0x6dc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5			0x2e0 0x6e0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC		0x2e4 0x6e4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6			0x2e4 0x6e4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG		0x2e8 0x6e8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7			0x2e8 0x6e8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0			0x2ec 0x6ec 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8			0x2ec 0x6ec 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1			0x2f0 0x6f0 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9			0x2f0 0x6f0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE		0x2f4 0x6f4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10		0x2f4 0x6f4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2		0x2f8 0x6f8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11		0x2f8 0x6f8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL		0x2fc 0x6fc 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12		0x2fc 0x6fc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0		0x300 0x700 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13		0x300 0x700 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1		0x304 0x704 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14		0x304 0x704 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH		0x308 0x708 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15		0x308 0x708 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0		0x30c 0x70c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16		0x30c 0x70c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1		0x310 0x710 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17		0x310 0x710 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0		0x314 0x714 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18		0x314 0x714 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11		0x314 0x714 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5		0x314 0x714 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1		0x318 0x718 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19		0x318 0x718 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12		0x318 0x718 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6		0x318 0x718 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0		0x31c 0x71c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20		0x31c 0x71c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13		0x31c 0x71c 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7		0x31c 0x71c 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1		0x320 0x720 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21		0x320 0x720 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14		0x320 0x720 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8		0x320 0x720 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0		0x324 0x724 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22		0x324 0x724 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS		0x324 0x724 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16		0x324 0x724 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1		0x328 0x728 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23		0x328 0x728 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS		0x328 0x728 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17		0x328 0x728 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS		0x328 0x728 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN3__DI1_PIN3			0x32c 0x72c 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN2__DI1_PIN2			0x330 0x734 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK			0x338 0x740 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP2_WAIT			0x338 0x740 0x9a8 0x2 0x1
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN			0x33c 0x744 0x9a0 0x3 0x1
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO			0x33c 0x744 0x9c0 0x0 0x0
-#define MX51_PAD_DI_GP3__FEC_TX_ER			0x33c 0x744 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN			0x340 0x748 0x99c 0x3 0x1
-#define MX51_PAD_DI2_PIN4__DI2_PIN4			0x340 0x748 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN4__FEC_CRS			0x340 0x748 0x950 0x2 0x1
-#define MX51_PAD_DI2_PIN2__DI2_PIN2			0x344 0x74c 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN2__FEC_MDC			0x344 0x74c 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN3__DI2_PIN3			0x348 0x750 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN3__FEC_MDIO			0x348 0x750 0x954 0x2 0x1
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK		0x34c 0x754 0x000 0x0 0x0
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1		0x34c 0x754 0x95c 0x2 0x1
-#define MX51_PAD_DI_GP4__DI2_PIN15			0x350 0x758 0x000 0x4 0x0
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN			0x350 0x758 0x9c0 0x0 0x1
-#define MX51_PAD_DI_GP4__DISP2_PIN1			0x350 0x758 0x000 0x3 0x0
-#define MX51_PAD_DI_GP4__FEC_RDATA2			0x350 0x758 0x960 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0			0x354 0x75c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3			0x354 0x75c 0x964 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__KEY_COL6			0x354 0x75c 0x9c8 0x4 0x1
-#define MX51_PAD_DISP2_DAT0__UART3_RXD			0x354 0x75c 0x9f4 0x5 0x8
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK			0x354 0x75c 0x9f8 0x3 0x1
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1			0x358 0x760 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER			0x358 0x760 0x970 0x2 0x1
-#define MX51_PAD_DISP2_DAT1__KEY_COL7			0x358 0x760 0x9cc 0x4 0x1
-#define MX51_PAD_DISP2_DAT1__UART3_TXD			0x358 0x760 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR			0x358 0x760 0xa1c 0x3 0x1
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2			0x35c 0x764 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3			0x360 0x768 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4			0x364 0x76c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5			0x368 0x770 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6			0x36c 0x774 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1			0x36c 0x774 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT6__GPIO1_19			0x36c 0x774 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4			0x36c 0x774 0x9d0 0x4 0x1
-#define MX51_PAD_DISP2_DAT6__USBH3_STP			0x36c 0x774 0xa24 0x3 0x1
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7			0x370 0x778 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2			0x370 0x778 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT7__GPIO1_29			0x370 0x778 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5			0x370 0x778 0x9d4 0x4 0x1
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT			0x370 0x778 0xa20 0x3 0x1
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8			0x374 0x77c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3			0x374 0x77c 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT8__GPIO1_30			0x374 0x77c 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6			0x374 0x77c 0x9d8 0x4 0x1
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0		0x374 0x77c 0x9fc 0x3 0x1
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC			0x378 0x780 0x8f4 0x4 0x1
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9			0x378 0x780 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN			0x378 0x780 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT9__GPIO1_31			0x378 0x780 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1		0x378 0x780 0xa00 0x3 0x1
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10		0x37c 0x784 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS		0x37c 0x784 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT10__FEC_COL			0x37c 0x784 0x94c 0x2 0x1
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7			0x37c 0x784 0x9dc 0x4 0x1
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2		0x37c 0x784 0xa04 0x3 0x1
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD			0x380 0x788 0x8f0 0x4 0x1
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11		0x380 0x788 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK		0x380 0x788 0x968 0x2 0x1
-#define MX51_PAD_DISP2_DAT11__GPIO1_10			0x380 0x788 0x000 0x7 0x0
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3		0x380 0x788 0xa08 0x3 0x1
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD			0x384 0x78c 0x8ec 0x4 0x1
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12		0x384 0x78c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV			0x384 0x78c 0x96c 0x2 0x1
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4		0x384 0x78c 0xa0c 0x3 0x1
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC			0x388 0x790 0x8fc 0x4 0x1
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13		0x388 0x790 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK		0x388 0x790 0x974 0x2 0x1
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5		0x388 0x790 0xa10 0x3 0x1
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS			0x38c 0x794 0x900 0x4 0x1
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14		0x38c 0x794 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0		0x38c 0x794 0x958 0x2 0x1
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6		0x38c 0x794 0xa14 0x3 0x1
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS			0x390 0x798 0x8f8 0x4 0x1
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS		0x390 0x798 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15		0x390 0x798 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0		0x390 0x798 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7		0x390 0x798 0xa18 0x3 0x1
-#define MX51_PAD_SD1_CMD__AUD5_RXFS			0x394 0x79c 0x8e0 0x1 0x1
-#define MX51_PAD_SD1_CMD__CSPI_MOSI			0x394 0x79c 0x91c 0x2 0x2
-#define MX51_PAD_SD1_CMD__SD1_CMD			0x394 0x79c 0x000 0x0 0x0
-#define MX51_PAD_SD1_CLK__AUD5_RXC			0x398 0x7a0 0x8dc 0x1 0x1
-#define MX51_PAD_SD1_CLK__CSPI_SCLK			0x398 0x7a0 0x914 0x2 0x2
-#define MX51_PAD_SD1_CLK__SD1_CLK			0x398 0x7a0 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA0__AUD5_TXD			0x39c 0x7a4 0x8d8 0x1 0x2
-#define MX51_PAD_SD1_DATA0__CSPI_MISO			0x39c 0x7a4 0x918 0x2 0x1
-#define MX51_PAD_SD1_DATA0__SD1_DATA0			0x39c 0x7a4 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA0__EIM_DA0			0x01c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA1__EIM_DA1			0x020 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA2__EIM_DA2			0x024 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA3__EIM_DA3			0x028 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA1__AUD5_RXD			0x3a0 0x7a8 0x8d4 0x1 0x2
-#define MX51_PAD_SD1_DATA1__SD1_DATA1			0x3a0 0x7a8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA4__EIM_DA4			0x02c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA5__EIM_DA5			0x030 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA6__EIM_DA6			0x034 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA7__EIM_DA7			0x038 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA2__AUD5_TXC			0x3a4 0x7ac 0x8e4 0x1 0x2
-#define MX51_PAD_SD1_DATA2__SD1_DATA2			0x3a4 0x7ac 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA10__EIM_DA10			0x044 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA11__EIM_DA11			0x048 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA8__EIM_DA8			0x03c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA9__EIM_DA9			0x040 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS			0x3a8 0x7b0 0x8e8 0x1 0x2
-#define MX51_PAD_SD1_DATA3__CSPI_SS1			0x3a8 0x7b0 0x920 0x2 0x1
-#define MX51_PAD_SD1_DATA3__SD1_DATA3			0x3a8 0x7b0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_0__CSPI_SS2			0x3ac 0x7b4 0x924 0x2 0x0
-#define MX51_PAD_GPIO1_0__GPIO1_0			0x3ac 0x7b4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_0__SD1_CD			0x3ac 0x7b4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_1__CSPI_MISO			0x3b0 0x7b8 0x918 0x2 0x2
-#define MX51_PAD_GPIO1_1__GPIO1_1			0x3b0 0x7b8 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_1__SD1_WP			0x3b0 0x7b8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA12__EIM_DA12			0x04c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA13__EIM_DA13			0x050 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA14__EIM_DA14			0x054 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA15__EIM_DA15			0x058 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD2_CMD__CSPI_MOSI			0x3b4 0x7bc 0x91c 0x2 0x3
-#define MX51_PAD_SD2_CMD__I2C1_SCL			0x3b4 0x7bc 0x9b0 0x1 0x2
-#define MX51_PAD_SD2_CMD__SD2_CMD			0x3b4 0x7bc 0x000 0x0 0x0
-#define MX51_PAD_SD2_CLK__CSPI_SCLK			0x3b8 0x7c0 0x914 0x2 0x3
-#define MX51_PAD_SD2_CLK__I2C1_SDA			0x3b8 0x7c0 0x9b4 0x1 0x2
-#define MX51_PAD_SD2_CLK__SD2_CLK			0x3b8 0x7c0 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA0__CSPI_MISO			0x3bc 0x7c4 0x918 0x2 0x3
-#define MX51_PAD_SD2_DATA0__SD1_DAT4			0x3bc 0x7c4 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA0__SD2_DATA0			0x3bc 0x7c4 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__SD1_DAT5			0x3c0 0x7c8 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA1__SD2_DATA1			0x3c0 0x7c8 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP			0x3c0 0x7c8 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA2__SD1_DAT6			0x3c4 0x7cc 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA2__SD2_DATA2			0x3c4 0x7cc 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM			0x3c4 0x7cc 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA3__CSPI_SS2			0x3c8 0x7d0 0x924 0x2 0x1
-#define MX51_PAD_SD2_DATA3__SD1_DAT7			0x3c8 0x7d0 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA3__SD2_DATA3			0x3c8 0x7d0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__CCM_OUT_2			0x3cc 0x7d4 0x000 0x5 0x0
-#define MX51_PAD_GPIO1_2__GPIO1_2			0x3cc 0x7d4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__I2C2_SCL			0x3cc 0x7d4 0x9b8 0x2 0x3
-#define MX51_PAD_GPIO1_2__PLL1_BYP			0x3cc 0x7d4 0x90c 0x7 0x1
-#define MX51_PAD_GPIO1_2__PWM1_PWMO			0x3cc 0x7d4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_3__GPIO1_3			0x3d0 0x7d8 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_3__I2C2_SDA			0x3d0 0x7d8 0x9bc 0x2 0x3
-#define MX51_PAD_GPIO1_3__PLL2_BYP			0x3d0 0x7d8 0x910 0x7 0x1
-#define MX51_PAD_GPIO1_3__PWM2_PWMO			0x3d0 0x7d8 0x000 0x1 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		0x3d4 0x7fc 0x000 0x0 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B		0x3d4 0x7fc 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK			0x3d8 0x804 0x908 0x4 0x1
-#define MX51_PAD_GPIO1_4__EIM_RDY			0x3d8 0x804 0x938 0x3 0x1
-#define MX51_PAD_GPIO1_4__GPIO1_4			0x3d8 0x804 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B			0x3d8 0x804 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_5__CSI2_MCLK			0x3dc 0x808 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_5__DISP2_PIN16			0x3dc 0x808 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_5__GPIO1_5			0x3dc 0x808 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B			0x3dc 0x808 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_6__DISP2_PIN17			0x3e0 0x80c 0x000 0x4 0x0
-#define MX51_PAD_GPIO1_6__GPIO1_6			0x3e0 0x80c 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_6__REF_EN_B			0x3e0 0x80c 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__CCM_OUT_0			0x3e4 0x810 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__GPIO1_7			0x3e4 0x810 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_7__SD2_WP			0x3e4 0x810 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1			0x3e4 0x810 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN			0x3e8 0x814 0x99c 0x2 0x2
-#define MX51_PAD_GPIO1_8__GPIO1_8			0x3e8 0x814 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_8__SD2_CD			0x3e8 0x814 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_8__USBH3_PWR			0x3e8 0x814 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_9__CCM_OUT_1			0x3ec 0x818 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS			0x3ec 0x818 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS			0x3ec 0x818 0x000 0x7 0x0
-#define MX51_PAD_GPIO1_9__GPIO1_9			0x3ec 0x818 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_9__SD2_LCTL			0x3ec 0x818 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_9__USBH3_OC			0x3ec 0x818 0x000 0x1 0x0
-
-#endif /* __DTS_IMX51_PINFUNC_H */
diff --git a/src/arm/imx53-pinfunc.h b/src/arm/imx53-pinfunc.h
deleted file mode 100644
index aec406bc65eb..000000000000
--- a/src/arm/imx53-pinfunc.h
+++ /dev/null
@@ -1,1189 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX53_PINFUNC_H
-#define __DTS_IMX53_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX53_PAD_GPIO_19__KPP_COL_5				0x020 0x348 0x840 0x0 0x0
-#define MX53_PAD_GPIO_19__GPIO4_5				0x020 0x348 0x000 0x1 0x0
-#define MX53_PAD_GPIO_19__CCM_CLKO				0x020 0x348 0x000 0x2 0x0
-#define MX53_PAD_GPIO_19__SPDIF_OUT1				0x020 0x348 0x000 0x3 0x0
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2			0x020 0x348 0x000 0x4 0x0
-#define MX53_PAD_GPIO_19__ECSPI1_RDY				0x020 0x348 0x000 0x5 0x0
-#define MX53_PAD_GPIO_19__FEC_TDATA_3				0x020 0x348 0x000 0x6 0x0
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT				0x020 0x348 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL0__KPP_COL_0				0x024 0x34c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL0__GPIO4_6				0x024 0x34c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC			0x024 0x34c 0x758 0x2 0x0
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX			0x024 0x34c 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK				0x024 0x34c 0x79c 0x5 0x0
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3				0x024 0x34c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST			0x024 0x34c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0				0x028 0x350 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW0__GPIO4_7				0x028 0x350 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD			0x028 0x350 0x74c 0x2 0x0
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX			0x028 0x350 0x890 0x4 0x1
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI				0x028 0x350 0x7a4 0x5 0x0
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER				0x028 0x350 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL1__KPP_COL_1				0x02c 0x354 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL1__GPIO4_8				0x02c 0x354 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS			0x02c 0x354 0x75c 0x2 0x0
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX			0x02c 0x354 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO				0x02c 0x354 0x7a0 0x5 0x0
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK				0x02c 0x354 0x808 0x6 0x0
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY			0x02c 0x354 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1				0x030 0x358 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW1__GPIO4_9				0x030 0x358 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD			0x030 0x358 0x748 0x2 0x0
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX			0x030 0x358 0x898 0x4 0x1
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0				0x030 0x358 0x7a8 0x5 0x0
-#define MX53_PAD_KEY_ROW1__FEC_COL				0x030 0x358 0x800 0x6 0x0
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID			0x030 0x358 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL2__KPP_COL_2				0x034 0x35c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL2__GPIO4_10				0x034 0x35c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN				0x034 0x35c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL2__FEC_MDIO				0x034 0x35c 0x804 0x4 0x0
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1				0x034 0x35c 0x7ac 0x5 0x0
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2				0x034 0x35c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE			0x034 0x35c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2				0x038 0x360 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW2__GPIO4_11				0x038 0x360 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN				0x038 0x360 0x760 0x2 0x0
-#define MX53_PAD_KEY_ROW2__FEC_MDC				0x038 0x360 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2				0x038 0x360 0x7b0 0x5 0x0
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2				0x038 0x360 0x000 0x6 0x0
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR			0x038 0x360 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL3__KPP_COL_3				0x03c 0x364 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL3__GPIO4_12				0x03c 0x364 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP				0x03c 0x364 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL3__SPDIF_IN1				0x03c 0x364 0x870 0x3 0x0
-#define MX53_PAD_KEY_COL3__I2C2_SCL				0x03c 0x364 0x81c 0x4 0x0
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3				0x03c 0x364 0x7b4 0x5 0x0
-#define MX53_PAD_KEY_COL3__FEC_CRS				0x03c 0x364 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK			0x03c 0x364 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3				0x040 0x368 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW3__GPIO4_13				0x040 0x368 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM				0x040 0x368 0x000 0x2 0x0
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK			0x040 0x368 0x768 0x3 0x0
-#define MX53_PAD_KEY_ROW3__I2C2_SDA				0x040 0x368 0x820 0x4 0x0
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT			0x040 0x368 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP				0x040 0x368 0x77c 0x6 0x0
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0			0x040 0x368 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL4__KPP_COL_4				0x044 0x36c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL4__GPIO4_14				0x044 0x36c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN				0x044 0x36c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL4__IPU_SISG_4				0x044 0x36c 0x000 0x3 0x0
-#define MX53_PAD_KEY_COL4__UART5_RTS				0x044 0x36c 0x894 0x4 0x0
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC			0x044 0x36c 0x89c 0x5 0x0
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1			0x044 0x36c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4				0x048 0x370 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW4__GPIO4_15				0x048 0x370 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN				0x048 0x370 0x764 0x2 0x0
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5				0x048 0x370 0x000 0x3 0x0
-#define MX53_PAD_KEY_ROW4__UART5_CTS				0x048 0x370 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR			0x048 0x370 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID			0x048 0x370 0x000 0x7 0x0
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK			0x04c 0x378 0x000 0x0 0x0
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16				0x04c 0x378 0x000 0x1 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR			0x04c 0x378 0x000 0x2 0x0
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		0x04c 0x378 0x000 0x5 0x0
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0			0x04c 0x378 0x000 0x6 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID			0x04c 0x378 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15			0x050 0x37c 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN15__GPIO4_17				0x050 0x37c 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC			0x050 0x37c 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		0x050 0x37c 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1			0x050 0x37c 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID			0x050 0x37c 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2				0x054 0x380 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN2__GPIO4_18				0x054 0x380 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD			0x054 0x380 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		0x054 0x380 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2			0x054 0x380 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION			0x054 0x380 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3				0x058 0x384 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN3__GPIO4_19				0x058 0x384 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS			0x058 0x384 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		0x058 0x384 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3			0x058 0x384 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG			0x058 0x384 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4				0x05c 0x388 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN4__GPIO4_20				0x05c 0x388 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD			0x05c 0x388 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP				0x05c 0x388 0x7fc 0x3 0x0
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD			0x05c 0x388 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4			0x05c 0x388 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		0x05c 0x388 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0			0x060 0x38c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT0__GPIO4_21				0x060 0x38c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK				0x060 0x38c 0x780 0x2 0x0
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		0x060 0x38c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		0x060 0x38c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5			0x060 0x38c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY			0x060 0x38c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1			0x064 0x390 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT1__GPIO4_22				0x064 0x390 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI				0x064 0x390 0x788 0x2 0x0
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		0x064 0x390 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	0x064 0x390 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6			0x064 0x390 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID			0x064 0x390 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2			0x068 0x394 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT2__GPIO4_23				0x068 0x394 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO				0x068 0x394 0x784 0x2 0x0
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		0x068 0x394 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE			0x068 0x394 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7			0x068 0x394 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE			0x068 0x394 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3			0x06c 0x398 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT3__GPIO4_24				0x06c 0x398 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0				0x06c 0x398 0x78c 0x2 0x0
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		0x06c 0x398 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		0x06c 0x398 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8			0x06c 0x398 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR			0x06c 0x398 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4			0x070 0x39c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT4__GPIO4_25				0x070 0x39c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1				0x070 0x39c 0x790 0x2 0x0
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		0x070 0x39c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB			0x070 0x39c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9			0x070 0x39c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK			0x070 0x39c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5			0x074 0x3a0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT5__GPIO4_26				0x074 0x3a0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2				0x074 0x3a0 0x794 0x2 0x0
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		0x074 0x3a0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		0x074 0x3a0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10			0x074 0x3a0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		0x074 0x3a0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6			0x078 0x3a4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT6__GPIO4_27				0x078 0x3a4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3				0x078 0x3a4 0x798 0x2 0x0
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		0x078 0x3a4 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		0x078 0x3a4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11			0x078 0x3a4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		0x078 0x3a4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7			0x07c 0x3a8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT7__GPIO4_28				0x07c 0x3a8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY				0x07c 0x3a8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		0x07c 0x3a8 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		0x07c 0x3a8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12			0x07c 0x3a8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID			0x07c 0x3a8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8			0x080 0x3ac 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT8__GPIO4_29				0x080 0x3ac 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO				0x080 0x3ac 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B			0x080 0x3ac 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		0x080 0x3ac 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13			0x080 0x3ac 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID			0x080 0x3ac 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9			0x084 0x3b0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT9__GPIO4_30				0x084 0x3b0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO				0x084 0x3b0 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B			0x084 0x3b0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		0x084 0x3b0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14			0x084 0x3b0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0			0x084 0x3b0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10			0x088 0x3b4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT10__GPIO4_31				0x088 0x3b4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP			0x088 0x3b4 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	0x088 0x3b4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15			0x088 0x3b4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1			0x088 0x3b4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11			0x08c 0x3b8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT11__GPIO5_5				0x08c 0x3b8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT			0x08c 0x3b8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	0x08c 0x3b8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16			0x08c 0x3b8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2			0x08c 0x3b8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12			0x090 0x3bc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT12__GPIO5_6				0x090 0x3bc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK			0x090 0x3bc 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	0x090 0x3bc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17			0x090 0x3bc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3			0x090 0x3bc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13			0x094 0x3c0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT13__GPIO5_7				0x094 0x3c0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS			0x094 0x3c0 0x754 0x3 0x0
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	0x094 0x3c0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18			0x094 0x3c0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4			0x094 0x3c0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14			0x098 0x3c4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT14__GPIO5_8				0x098 0x3c4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC			0x098 0x3c4 0x750 0x3 0x0
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	0x098 0x3c4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19			0x098 0x3c4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5			0x098 0x3c4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15			0x09c 0x3c8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT15__GPIO5_9				0x09c 0x3c8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1			0x09c 0x3c8 0x7ac 0x2 0x1
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1			0x09c 0x3c8 0x7c8 0x3 0x0
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	0x09c 0x3c8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20			0x09c 0x3c8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6			0x09c 0x3c8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16			0x0a0 0x3cc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT16__GPIO5_10				0x0a0 0x3cc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI			0x0a0 0x3cc 0x7c0 0x2 0x0
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC			0x0a0 0x3cc 0x758 0x3 0x1
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0			0x0a0 0x3cc 0x868 0x4 0x0
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	0x0a0 0x3cc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21			0x0a0 0x3cc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7			0x0a0 0x3cc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17			0x0a4 0x3d0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT17__GPIO5_11				0x0a4 0x3d0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO			0x0a4 0x3d0 0x7bc 0x2 0x0
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD			0x0a4 0x3d0 0x74c 0x3 0x1
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1			0x0a4 0x3d0 0x86c 0x4 0x0
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	0x0a4 0x3d0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22			0x0a4 0x3d0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18			0x0a8 0x3d4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT18__GPIO5_12				0x0a8 0x3d4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0			0x0a8 0x3d4 0x7c4 0x2 0x0
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS			0x0a8 0x3d4 0x75c 0x3 0x1
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS			0x0a8 0x3d4 0x73c 0x4 0x0
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	0x0a8 0x3d4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23			0x0a8 0x3d4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2			0x0a8 0x3d4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19			0x0ac 0x3d8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT19__GPIO5_13				0x0ac 0x3d8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK			0x0ac 0x3d8 0x7b8 0x2 0x0
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD			0x0ac 0x3d8 0x748 0x3 0x1
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC			0x0ac 0x3d8 0x738 0x4 0x0
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	0x0ac 0x3d8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24			0x0ac 0x3d8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3			0x0ac 0x3d8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20			0x0b0 0x3dc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT20__GPIO5_14				0x0b0 0x3dc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK			0x0b0 0x3dc 0x79c 0x2 0x1
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC			0x0b0 0x3dc 0x740 0x3 0x0
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	0x0b0 0x3dc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25			0x0b0 0x3dc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI			0x0b0 0x3dc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21			0x0b4 0x3e0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT21__GPIO5_15				0x0b4 0x3e0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI			0x0b4 0x3e0 0x7a4 0x2 0x1
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD			0x0b4 0x3e0 0x734 0x3 0x0
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		0x0b4 0x3e0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26			0x0b4 0x3e0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO			0x0b4 0x3e0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22			0x0b8 0x3e4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT22__GPIO5_16				0x0b8 0x3e4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO			0x0b8 0x3e4 0x7a0 0x2 0x1
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS			0x0b8 0x3e4 0x744 0x3 0x0
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		0x0b8 0x3e4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27			0x0b8 0x3e4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK			0x0b8 0x3e4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23			0x0bc 0x3e8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT23__GPIO5_17				0x0bc 0x3e8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0			0x0bc 0x3e8 0x7a8 0x2 0x1
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD			0x0bc 0x3e8 0x730 0x3 0x0
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		0x0bc 0x3e8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28			0x0bc 0x3e8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS			0x0bc 0x3e8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK			0x0c0 0x3ec 0x000 0x0 0x0
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18				0x0c0 0x3ec 0x000 0x1 0x0
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0			0x0c0 0x3ec 0x000 0x5 0x0
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29			0x0c0 0x3ec 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC			0x0c4 0x3f0 0x000 0x0 0x0
-#define MX53_PAD_CSI0_MCLK__GPIO5_19				0x0c4 0x3f0 0x000 0x1 0x0
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK			0x0c4 0x3f0 0x000 0x2 0x0
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1			0x0c4 0x3f0 0x000 0x5 0x0
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30			0x0c4 0x3f0 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL				0x0c4 0x3f0 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN			0x0c8 0x3f4 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20				0x0c8 0x3f4 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2			0x0c8 0x3f4 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31			0x0c8 0x3f4 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK			0x0c8 0x3f4 0x000 0x7 0x0
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC			0x0cc 0x3f8 0x000 0x0 0x0
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21				0x0cc 0x3f8 0x000 0x1 0x0
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3			0x0cc 0x3f8 0x000 0x5 0x0
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32			0x0cc 0x3f8 0x000 0x6 0x0
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0			0x0cc 0x3f8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4			0x0d0 0x3fc 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT4__GPIO5_22				0x0d0 0x3fc 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5				0x0d0 0x3fc 0x840 0x2 0x1
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK				0x0d0 0x3fc 0x79c 0x3 0x2
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP			0x0d0 0x3fc 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC			0x0d0 0x3fc 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33			0x0d0 0x3fc 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1			0x0d0 0x3fc 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5			0x0d4 0x400 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT5__GPIO5_23				0x0d4 0x400 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5				0x0d4 0x400 0x84c 0x2 0x0
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI				0x0d4 0x400 0x7a4 0x3 0x2
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT			0x0d4 0x400 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD			0x0d4 0x400 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34			0x0d4 0x400 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2			0x0d4 0x400 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6			0x0d8 0x404 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT6__GPIO5_24				0x0d8 0x404 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6				0x0d8 0x404 0x844 0x2 0x0
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO				0x0d8 0x404 0x7a0 0x3 0x2
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK			0x0d8 0x404 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS			0x0d8 0x404 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35			0x0d8 0x404 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3			0x0d8 0x404 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7			0x0dc 0x408 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT7__GPIO5_25				0x0dc 0x408 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6				0x0dc 0x408 0x850 0x2 0x0
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0				0x0dc 0x408 0x7a8 0x3 0x2
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR			0x0dc 0x408 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD			0x0dc 0x408 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36			0x0dc 0x408 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4			0x0dc 0x408 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8			0x0e0 0x40c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT8__GPIO5_26				0x0e0 0x40c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7				0x0e0 0x40c 0x848 0x2 0x0
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK				0x0e0 0x40c 0x7b8 0x3 0x1
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC			0x0e0 0x40c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA				0x0e0 0x40c 0x818 0x5 0x0
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37			0x0e0 0x40c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5			0x0e0 0x40c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9			0x0e4 0x410 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT9__GPIO5_27				0x0e4 0x410 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7				0x0e4 0x410 0x854 0x2 0x0
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI				0x0e4 0x410 0x7c0 0x3 0x1
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR			0x0e4 0x410 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL				0x0e4 0x410 0x814 0x5 0x0
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38			0x0e4 0x410 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6			0x0e4 0x410 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10			0x0e8 0x414 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT10__GPIO5_28				0x0e8 0x414 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX			0x0e8 0x414 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO			0x0e8 0x414 0x7bc 0x3 0x1
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC			0x0e8 0x414 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4			0x0e8 0x414 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39			0x0e8 0x414 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7			0x0e8 0x414 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11			0x0ec 0x418 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT11__GPIO5_29				0x0ec 0x418 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX			0x0ec 0x418 0x878 0x2 0x1
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0				0x0ec 0x418 0x7c4 0x3 0x1
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS			0x0ec 0x418 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5			0x0ec 0x418 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40			0x0ec 0x418 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8			0x0ec 0x418 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12			0x0f0 0x41c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT12__GPIO5_30				0x0f0 0x41c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX			0x0f0 0x41c 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		0x0f0 0x41c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6			0x0f0 0x41c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41			0x0f0 0x41c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9			0x0f0 0x41c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13			0x0f4 0x420 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT13__GPIO5_31				0x0f4 0x420 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX			0x0f4 0x420 0x890 0x2 0x3
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		0x0f4 0x420 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7			0x0f4 0x420 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42			0x0f4 0x420 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10			0x0f4 0x420 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14			0x0f8 0x424 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT14__GPIO6_0				0x0f8 0x424 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX			0x0f8 0x424 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		0x0f8 0x424 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8			0x0f8 0x424 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43			0x0f8 0x424 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11			0x0f8 0x424 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15			0x0fc 0x428 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT15__GPIO6_1				0x0fc 0x428 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX			0x0fc 0x428 0x898 0x2 0x3
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		0x0fc 0x428 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9			0x0fc 0x428 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44			0x0fc 0x428 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12			0x0fc 0x428 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16			0x100 0x42c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT16__GPIO6_2				0x100 0x42c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT16__UART4_RTS				0x100 0x42c 0x88c 0x2 0x0
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		0x100 0x42c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10			0x100 0x42c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45			0x100 0x42c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13			0x100 0x42c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17			0x104 0x430 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT17__GPIO6_3				0x104 0x430 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT17__UART4_CTS				0x104 0x430 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		0x104 0x430 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11			0x104 0x430 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46			0x104 0x430 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14			0x104 0x430 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18			0x108 0x434 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT18__GPIO6_4				0x108 0x434 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT18__UART5_RTS				0x108 0x434 0x894 0x2 0x2
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		0x108 0x434 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12			0x108 0x434 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47			0x108 0x434 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15			0x108 0x434 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19			0x10c 0x438 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT19__GPIO6_5				0x10c 0x438 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT19__UART5_CTS				0x10c 0x438 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		0x10c 0x438 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13			0x10c 0x438 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48			0x10c 0x438 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK			0x10c 0x438 0x000 0x7 0x0
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25				0x110 0x458 0x000 0x0 0x0
-#define MX53_PAD_EIM_A25__GPIO5_2				0x110 0x458 0x000 0x1 0x0
-#define MX53_PAD_EIM_A25__ECSPI2_RDY				0x110 0x458 0x000 0x2 0x0
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12				0x110 0x458 0x000 0x3 0x0
-#define MX53_PAD_EIM_A25__CSPI_SS1				0x110 0x458 0x790 0x4 0x1
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS				0x110 0x458 0x000 0x6 0x0
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK			0x110 0x458 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2				0x114 0x45c 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB2__GPIO2_30				0x114 0x45c 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK			0x114 0x45c 0x76c 0x2 0x0
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS			0x114 0x45c 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0				0x114 0x45c 0x7a8 0x4 0x3
-#define MX53_PAD_EIM_EB2__I2C2_SCL				0x114 0x45c 0x81c 0x5 0x1
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16				0x118 0x460 0x000 0x0 0x0
-#define MX53_PAD_EIM_D16__GPIO3_16				0x118 0x460 0x000 0x1 0x0
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5				0x118 0x460 0x000 0x2 0x0
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK			0x118 0x460 0x000 0x3 0x0
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK				0x118 0x460 0x79c 0x4 0x3
-#define MX53_PAD_EIM_D16__I2C2_SDA				0x118 0x460 0x820 0x5 0x1
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17				0x11c 0x464 0x000 0x0 0x0
-#define MX53_PAD_EIM_D17__GPIO3_17				0x11c 0x464 0x000 0x1 0x0
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6				0x11c 0x464 0x000 0x2 0x0
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN			0x11c 0x464 0x830 0x3 0x0
-#define MX53_PAD_EIM_D17__ECSPI1_MISO				0x11c 0x464 0x7a0 0x4 0x3
-#define MX53_PAD_EIM_D17__I2C3_SCL				0x11c 0x464 0x824 0x5 0x0
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18				0x120 0x468 0x000 0x0 0x0
-#define MX53_PAD_EIM_D18__GPIO3_18				0x120 0x468 0x000 0x1 0x0
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7				0x120 0x468 0x000 0x2 0x0
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO			0x120 0x468 0x830 0x3 0x1
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI				0x120 0x468 0x7a4 0x4 0x3
-#define MX53_PAD_EIM_D18__I2C3_SDA				0x120 0x468 0x828 0x5 0x0
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS				0x120 0x468 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19				0x124 0x46c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D19__GPIO3_19				0x124 0x46c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8				0x124 0x46c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS			0x124 0x46c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D19__ECSPI1_SS1				0x124 0x46c 0x7ac 0x4 0x2
-#define MX53_PAD_EIM_D19__EPIT1_EPITO				0x124 0x46c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D19__UART1_CTS				0x124 0x46c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC			0x124 0x46c 0x8a4 0x7 0x0
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20				0x128 0x470 0x000 0x0 0x0
-#define MX53_PAD_EIM_D20__GPIO3_20				0x128 0x470 0x000 0x1 0x0
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16				0x128 0x470 0x000 0x2 0x0
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS			0x128 0x470 0x000 0x3 0x0
-#define MX53_PAD_EIM_D20__CSPI_SS0				0x128 0x470 0x78c 0x4 0x1
-#define MX53_PAD_EIM_D20__EPIT2_EPITO				0x128 0x470 0x000 0x5 0x0
-#define MX53_PAD_EIM_D20__UART1_RTS				0x128 0x470 0x874 0x6 0x1
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR			0x128 0x470 0x000 0x7 0x0
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21				0x12c 0x474 0x000 0x0 0x0
-#define MX53_PAD_EIM_D21__GPIO3_21				0x12c 0x474 0x000 0x1 0x0
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17				0x12c 0x474 0x000 0x2 0x0
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK			0x12c 0x474 0x000 0x3 0x0
-#define MX53_PAD_EIM_D21__CSPI_SCLK				0x12c 0x474 0x780 0x4 0x1
-#define MX53_PAD_EIM_D21__I2C1_SCL				0x12c 0x474 0x814 0x5 0x1
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC			0x12c 0x474 0x89c 0x6 0x1
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22				0x130 0x478 0x000 0x0 0x0
-#define MX53_PAD_EIM_D22__GPIO3_22				0x130 0x478 0x000 0x1 0x0
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1				0x130 0x478 0x000 0x2 0x0
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN			0x130 0x478 0x82c 0x3 0x0
-#define MX53_PAD_EIM_D22__CSPI_MISO				0x130 0x478 0x784 0x4 0x1
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR			0x130 0x478 0x000 0x6 0x0
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23				0x134 0x47c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D23__GPIO3_23				0x134 0x47c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D23__UART3_CTS				0x134 0x47c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D23__UART1_DCD				0x134 0x47c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS				0x134 0x47c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2				0x134 0x47c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN			0x134 0x47c 0x834 0x6 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14				0x134 0x47c 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3				0x138 0x480 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB3__GPIO2_31				0x138 0x480 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB3__UART3_RTS				0x138 0x480 0x884 0x2 0x1
-#define MX53_PAD_EIM_EB3__UART1_RI				0x138 0x480 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3				0x138 0x480 0x000 0x5 0x0
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC			0x138 0x480 0x838 0x6 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16				0x138 0x480 0x000 0x7 0x0
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24				0x13c 0x484 0x000 0x0 0x0
-#define MX53_PAD_EIM_D24__GPIO3_24				0x13c 0x484 0x000 0x1 0x0
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX				0x13c 0x484 0x000 0x2 0x0
-#define MX53_PAD_EIM_D24__ECSPI1_SS2				0x13c 0x484 0x7b0 0x3 0x1
-#define MX53_PAD_EIM_D24__CSPI_SS2				0x13c 0x484 0x794 0x4 0x1
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS			0x13c 0x484 0x754 0x5 0x1
-#define MX53_PAD_EIM_D24__ECSPI2_SS2				0x13c 0x484 0x000 0x6 0x0
-#define MX53_PAD_EIM_D24__UART1_DTR				0x13c 0x484 0x000 0x7 0x0
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25				0x140 0x488 0x000 0x0 0x0
-#define MX53_PAD_EIM_D25__GPIO3_25				0x140 0x488 0x000 0x1 0x0
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX				0x140 0x488 0x888 0x2 0x1
-#define MX53_PAD_EIM_D25__ECSPI1_SS3				0x140 0x488 0x7b4 0x3 0x1
-#define MX53_PAD_EIM_D25__CSPI_SS3				0x140 0x488 0x798 0x4 0x1
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC			0x140 0x488 0x750 0x5 0x1
-#define MX53_PAD_EIM_D25__ECSPI2_SS3				0x140 0x488 0x000 0x6 0x0
-#define MX53_PAD_EIM_D25__UART1_DSR				0x140 0x488 0x000 0x7 0x0
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26				0x144 0x48c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D26__GPIO3_26				0x144 0x48c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX				0x144 0x48c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D26__FIRI_RXD				0x144 0x48c 0x80c 0x3 0x0
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1				0x144 0x48c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11				0x144 0x48c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D26__IPU_SISG_2				0x144 0x48c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22			0x144 0x48c 0x000 0x7 0x0
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27				0x148 0x490 0x000 0x0 0x0
-#define MX53_PAD_EIM_D27__GPIO3_27				0x148 0x490 0x000 0x1 0x0
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX				0x148 0x490 0x880 0x2 0x1
-#define MX53_PAD_EIM_D27__FIRI_TXD				0x148 0x490 0x000 0x3 0x0
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0				0x148 0x490 0x000 0x4 0x0
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13				0x148 0x490 0x000 0x5 0x0
-#define MX53_PAD_EIM_D27__IPU_SISG_3				0x148 0x490 0x000 0x6 0x0
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23			0x148 0x490 0x000 0x7 0x0
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28				0x14c 0x494 0x000 0x0 0x0
-#define MX53_PAD_EIM_D28__GPIO3_28				0x14c 0x494 0x000 0x1 0x0
-#define MX53_PAD_EIM_D28__UART2_CTS				0x14c 0x494 0x000 0x2 0x0
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			0x14c 0x494 0x82c 0x3 0x1
-#define MX53_PAD_EIM_D28__CSPI_MOSI				0x14c 0x494 0x788 0x4 0x1
-#define MX53_PAD_EIM_D28__I2C1_SDA				0x14c 0x494 0x818 0x5 0x1
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG				0x14c 0x494 0x000 0x6 0x0
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13				0x14c 0x494 0x000 0x7 0x0
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29				0x150 0x498 0x000 0x0 0x0
-#define MX53_PAD_EIM_D29__GPIO3_29				0x150 0x498 0x000 0x1 0x0
-#define MX53_PAD_EIM_D29__UART2_RTS				0x150 0x498 0x87c 0x2 0x1
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			0x150 0x498 0x000 0x3 0x0
-#define MX53_PAD_EIM_D29__CSPI_SS0				0x150 0x498 0x78c 0x4 0x2
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15				0x150 0x498 0x000 0x5 0x0
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC			0x150 0x498 0x83c 0x6 0x0
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14				0x150 0x498 0x000 0x7 0x0
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30				0x154 0x49c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D30__GPIO3_30				0x154 0x49c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D30__UART3_CTS				0x154 0x49c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3				0x154 0x49c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11				0x154 0x49c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21			0x154 0x49c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC			0x154 0x49c 0x8a0 0x6 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC			0x154 0x49c 0x8a4 0x7 0x1
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31				0x158 0x4a0 0x000 0x0 0x0
-#define MX53_PAD_EIM_D31__GPIO3_31				0x158 0x4a0 0x000 0x1 0x0
-#define MX53_PAD_EIM_D31__UART3_RTS				0x158 0x4a0 0x884 0x2 0x3
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2				0x158 0x4a0 0x000 0x3 0x0
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12				0x158 0x4a0 0x000 0x4 0x0
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20			0x158 0x4a0 0x000 0x5 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR			0x158 0x4a0 0x000 0x6 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR			0x158 0x4a0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24				0x15c 0x4a8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A24__GPIO5_4				0x15c 0x4a8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19			0x15c 0x4a8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19				0x15c 0x4a8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A24__IPU_SISG_2				0x15c 0x4a8 0x000 0x6 0x0
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID			0x15c 0x4a8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23				0x160 0x4ac 0x000 0x0 0x0
-#define MX53_PAD_EIM_A23__GPIO6_6				0x160 0x4ac 0x000 0x1 0x0
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18			0x160 0x4ac 0x000 0x2 0x0
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18				0x160 0x4ac 0x000 0x3 0x0
-#define MX53_PAD_EIM_A23__IPU_SISG_3				0x160 0x4ac 0x000 0x6 0x0
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION			0x160 0x4ac 0x000 0x7 0x0
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22				0x164 0x4b0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A22__GPIO2_16				0x164 0x4b0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17			0x164 0x4b0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17				0x164 0x4b0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7				0x164 0x4b0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21				0x168 0x4b4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A21__GPIO2_17				0x168 0x4b4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16			0x168 0x4b4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16				0x168 0x4b4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6				0x168 0x4b4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20				0x16c 0x4b8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A20__GPIO2_18				0x16c 0x4b8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15			0x16c 0x4b8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15				0x16c 0x4b8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5				0x16c 0x4b8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19				0x170 0x4bc 0x000 0x0 0x0
-#define MX53_PAD_EIM_A19__GPIO2_19				0x170 0x4bc 0x000 0x1 0x0
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14			0x170 0x4bc 0x000 0x2 0x0
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14				0x170 0x4bc 0x000 0x3 0x0
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4				0x170 0x4bc 0x000 0x7 0x0
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18				0x174 0x4c0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A18__GPIO2_20				0x174 0x4c0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13			0x174 0x4c0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13				0x174 0x4c0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3				0x174 0x4c0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17				0x178 0x4c4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A17__GPIO2_21				0x178 0x4c4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12			0x178 0x4c4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12				0x178 0x4c4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2				0x178 0x4c4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16				0x17c 0x4c8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A16__GPIO2_22				0x17c 0x4c8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK			0x17c 0x4c8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK			0x17c 0x4c8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1				0x17c 0x4c8 0x000 0x7 0x0
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0				0x180 0x4cc 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS0__GPIO2_23				0x180 0x4cc 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK				0x180 0x4cc 0x7b8 0x2 0x2
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5				0x180 0x4cc 0x000 0x3 0x0
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1				0x184 0x4d0 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS1__GPIO2_24				0x184 0x4d0 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI				0x184 0x4d0 0x7c0 0x2 0x2
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6				0x184 0x4d0 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE				0x188 0x4d4 0x000 0x0 0x0
-#define MX53_PAD_EIM_OE__GPIO2_25				0x188 0x4d4 0x000 0x1 0x0
-#define MX53_PAD_EIM_OE__ECSPI2_MISO				0x188 0x4d4 0x7bc 0x2 0x2
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7				0x188 0x4d4 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG				0x188 0x4d4 0x000 0x7 0x0
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW				0x18c 0x4d8 0x000 0x0 0x0
-#define MX53_PAD_EIM_RW__GPIO2_26				0x18c 0x4d8 0x000 0x1 0x0
-#define MX53_PAD_EIM_RW__ECSPI2_SS0				0x18c 0x4d8 0x7c4 0x2 0x2
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8				0x18c 0x4d8 0x000 0x3 0x0
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT			0x18c 0x4d8 0x000 0x7 0x0
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA				0x190 0x4dc 0x000 0x0 0x0
-#define MX53_PAD_EIM_LBA__GPIO2_27				0x190 0x4dc 0x000 0x1 0x0
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1				0x190 0x4dc 0x7c8 0x2 0x1
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17				0x190 0x4dc 0x000 0x3 0x0
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0				0x190 0x4dc 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0				0x194 0x4e4 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB0__GPIO2_28				0x194 0x4e4 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11			0x194 0x4e4 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11				0x194 0x4e4 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY				0x194 0x4e4 0x810 0x5 0x0
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7				0x194 0x4e4 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1				0x198 0x4e8 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB1__GPIO2_29				0x198 0x4e8 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10			0x198 0x4e8 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10				0x198 0x4e8 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6				0x198 0x4e8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0			0x19c 0x4ec 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA0__GPIO3_0				0x19c 0x4ec 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9			0x19c 0x4ec 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9				0x19c 0x4ec 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5				0x19c 0x4ec 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1			0x1a0 0x4f0 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA1__GPIO3_1				0x1a0 0x4f0 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8			0x1a0 0x4f0 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8				0x1a0 0x4f0 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4				0x1a0 0x4f0 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2			0x1a4 0x4f4 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA2__GPIO3_2				0x1a4 0x4f4 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7			0x1a4 0x4f4 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7				0x1a4 0x4f4 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3				0x1a4 0x4f4 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3			0x1a8 0x4f8 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA3__GPIO3_3				0x1a8 0x4f8 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6			0x1a8 0x4f8 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6				0x1a8 0x4f8 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2				0x1a8 0x4f8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4			0x1ac 0x4fc 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA4__GPIO3_4				0x1ac 0x4fc 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5			0x1ac 0x4fc 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5				0x1ac 0x4fc 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7				0x1ac 0x4fc 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5			0x1b0 0x500 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA5__GPIO3_5				0x1b0 0x500 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4			0x1b0 0x500 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4				0x1b0 0x500 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6				0x1b0 0x500 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6			0x1b4 0x504 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA6__GPIO3_6				0x1b4 0x504 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3			0x1b4 0x504 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3				0x1b4 0x504 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5				0x1b4 0x504 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7			0x1b8 0x508 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA7__GPIO3_7				0x1b8 0x508 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2			0x1b8 0x508 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2				0x1b8 0x508 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4				0x1b8 0x508 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8			0x1bc 0x50c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA8__GPIO3_8				0x1bc 0x50c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1			0x1bc 0x50c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1				0x1bc 0x50c 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3				0x1bc 0x50c 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9			0x1c0 0x510 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA9__GPIO3_9				0x1c0 0x510 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0			0x1c0 0x510 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0				0x1c0 0x510 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2				0x1c0 0x510 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10			0x1c4 0x514 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA10__GPIO3_10				0x1c4 0x514 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15			0x1c4 0x514 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN			0x1c4 0x514 0x834 0x4 0x1
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1			0x1c4 0x514 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11			0x1c8 0x518 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA11__GPIO3_11				0x1c8 0x518 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2				0x1c8 0x518 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC			0x1c8 0x518 0x838 0x4 0x1
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12			0x1cc 0x51c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA12__GPIO3_12				0x1cc 0x51c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3				0x1cc 0x51c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC			0x1cc 0x51c 0x83c 0x4 0x1
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13			0x1d0 0x520 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA13__GPIO3_13				0x1d0 0x520 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS			0x1d0 0x520 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK			0x1d0 0x520 0x76c 0x4 0x1
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14			0x1d4 0x524 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA14__GPIO3_14				0x1d4 0x524 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS			0x1d4 0x524 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK			0x1d4 0x524 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15			0x1d8 0x528 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA15__GPIO3_15				0x1d8 0x528 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1				0x1d8 0x528 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4				0x1d8 0x528 0x000 0x4 0x0
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B			0x1dc 0x52c 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WE_B__GPIO6_12				0x1dc 0x52c 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B			0x1e0 0x530 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RE_B__GPIO6_13				0x1e0 0x530 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT			0x1e4 0x534 0x000 0x0 0x0
-#define MX53_PAD_EIM_WAIT__GPIO5_0				0x1e4 0x534 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B			0x1e4 0x534 0x000 0x2 0x0
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22				0x1ec 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3			0x1ec 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24				0x1f0 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2			0x1f0 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26				0x1f4 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK			0x1f4 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28				0x1f8 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1			0x1f8 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30				0x1fc 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0			0x1fc 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22				0x200 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3			0x200 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24				0x204 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK			0x204 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26				0x208 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2			0x208 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28				0x20c 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1			0x20c 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30				0x210 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0			0x210 0x000 0x000 0x1 0x0
-#define MX53_PAD_GPIO_10__GPIO4_0				0x214 0x540 0x000 0x0 0x0
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT			0x214 0x540 0x000 0x1 0x0
-#define MX53_PAD_GPIO_11__GPIO4_1				0x218 0x544 0x000 0x0 0x0
-#define MX53_PAD_GPIO_12__GPIO4_2				0x21c 0x548 0x000 0x0 0x0
-#define MX53_PAD_GPIO_13__GPIO4_3				0x220 0x54c 0x000 0x0 0x0
-#define MX53_PAD_GPIO_14__GPIO4_4				0x224 0x550 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE			0x228 0x5a0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__GPIO6_7				0x228 0x5a0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0			0x228 0x5a0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE			0x22c 0x5a4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_ALE__GPIO6_8				0x22c 0x5a4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1			0x22c 0x5a4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B			0x230 0x5a8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WP_B__GPIO6_9				0x230 0x5a8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2			0x230 0x5a8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0			0x234 0x5ac 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RB0__GPIO6_10				0x234 0x5ac 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3			0x234 0x5ac 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0			0x238 0x5b0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS0__GPIO6_11				0x238 0x5b0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4			0x238 0x5b0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1			0x23c 0x5b4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS1__GPIO6_14				0x23c 0x5b4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK				0x23c 0x5b4 0x858 0x6 0x0
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5			0x23c 0x5b4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2			0x240 0x5b8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS2__GPIO6_15				0x240 0x5b8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0				0x240 0x5b8 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0				0x240 0x5b8 0x7e4 0x3 0x0
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE			0x240 0x5b8 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK			0x240 0x5b8 0x000 0x5 0x0
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG				0x240 0x5b8 0x860 0x6 0x0
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6			0x240 0x5b8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3			0x244 0x5bc 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS3__GPIO6_16				0x244 0x5bc 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1				0x244 0x5bc 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1				0x244 0x5bc 0x7e8 0x3 0x0
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26			0x244 0x5bc 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT				0x244 0x5bc 0x85c 0x6 0x0
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7			0x244 0x5bc 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDIO__FEC_MDIO				0x248 0x5c4 0x804 0x0 0x1
-#define MX53_PAD_FEC_MDIO__GPIO1_22				0x248 0x5c4 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR				0x248 0x5c4 0x7dc 0x2 0x0
-#define MX53_PAD_FEC_MDIO__FEC_COL				0x248 0x5c4 0x800 0x3 0x1
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2			0x248 0x5c4 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		0x248 0x5c4 0x000 0x5 0x0
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49			0x248 0x5c4 0x000 0x6 0x0
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK			0x24c 0x5c8 0x000 0x0 0x0
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23				0x24c 0x5c8 0x000 0x1 0x0
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR				0x24c 0x5c8 0x7cc 0x2 0x0
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		0x24c 0x5c8 0x000 0x5 0x0
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50			0x24c 0x5c8 0x000 0x6 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER				0x250 0x5cc 0x000 0x0 0x0
-#define MX53_PAD_FEC_RX_ER__GPIO1_24				0x250 0x5cc 0x000 0x1 0x0
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR				0x250 0x5cc 0x7d4 0x2 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK				0x250 0x5cc 0x808 0x3 0x1
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3			0x250 0x5cc 0x000 0x4 0x0
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV				0x254 0x5d0 0x000 0x0 0x0
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25				0x254 0x5d0 0x000 0x1 0x0
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT				0x254 0x5d0 0x7e0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1				0x258 0x5d4 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD1__GPIO1_26				0x258 0x5d4 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD1__ESAI1_FST				0x258 0x5d4 0x7d0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG				0x258 0x5d4 0x860 0x3 0x1
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1			0x258 0x5d4 0x000 0x4 0x0
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0				0x25c 0x5d8 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD0__GPIO1_27				0x25c 0x5d8 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT				0x25c 0x5d8 0x7d8 0x2 0x0
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT			0x25c 0x5d8 0x000 0x3 0x0
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN				0x260 0x5dc 0x000 0x0 0x0
-#define MX53_PAD_FEC_TX_EN__GPIO1_28				0x260 0x5dc 0x000 0x1 0x0
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2			0x260 0x5dc 0x7f0 0x2 0x0
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1				0x264 0x5e0 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD1__GPIO1_29				0x264 0x5e0 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3			0x264 0x5e0 0x7ec 0x2 0x0
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK				0x264 0x5e0 0x858 0x3 0x1
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK			0x264 0x5e0 0x000 0x4 0x0
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0				0x268 0x5e4 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD0__GPIO1_30				0x268 0x5e4 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1			0x268 0x5e4 0x7f4 0x2 0x0
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0			0x268 0x5e4 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDC__FEC_MDC				0x26c 0x5e8 0x000 0x0 0x0
-#define MX53_PAD_FEC_MDC__GPIO1_31				0x26c 0x5e8 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0				0x26c 0x5e8 0x7f8 0x2 0x0
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT				0x26c 0x5e8 0x85c 0x3 0x1
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		0x26c 0x5e8 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1			0x26c 0x5e8 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOW__PATA_DIOW				0x270 0x5f0 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOW__GPIO6_17				0x270 0x5f0 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX			0x270 0x5f0 0x000 0x3 0x0
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2			0x270 0x5f0 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMACK__PATA_DMACK				0x274 0x5f4 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMACK__GPIO6_18				0x274 0x5f4 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX			0x274 0x5f4 0x878 0x3 0x3
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3			0x274 0x5f4 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ				0x278 0x5f8 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMARQ__GPIO7_0				0x278 0x5f8 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX			0x278 0x5f8 0x000 0x3 0x0
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0			0x278 0x5f8 0x000 0x5 0x0
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4			0x278 0x5f8 0x000 0x7 0x0
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN			0x27c 0x5fc 0x000 0x0 0x0
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1			0x27c 0x5fc 0x000 0x1 0x0
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX			0x27c 0x5fc 0x880 0x3 0x3
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1			0x27c 0x5fc 0x000 0x5 0x0
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		0x27c 0x5fc 0x000 0x7 0x0
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ				0x280 0x600 0x000 0x0 0x0
-#define MX53_PAD_PATA_INTRQ__GPIO7_2				0x280 0x600 0x000 0x1 0x0
-#define MX53_PAD_PATA_INTRQ__UART2_CTS				0x280 0x600 0x000 0x3 0x0
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN				0x280 0x600 0x000 0x4 0x0
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2			0x280 0x600 0x000 0x5 0x0
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6			0x280 0x600 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOR__PATA_DIOR				0x284 0x604 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOR__GPIO7_3				0x284 0x604 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOR__UART2_RTS				0x284 0x604 0x87c 0x3 0x3
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN				0x284 0x604 0x760 0x4 0x1
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7			0x284 0x604 0x000 0x7 0x0
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		0x288 0x608 0x000 0x0 0x0
-#define MX53_PAD_PATA_RESET_B__GPIO7_4				0x288 0x608 0x000 0x1 0x0
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD			0x288 0x608 0x000 0x2 0x0
-#define MX53_PAD_PATA_RESET_B__UART1_CTS			0x288 0x608 0x000 0x3 0x0
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN			0x288 0x608 0x000 0x4 0x0
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		0x288 0x608 0x000 0x7 0x0
-#define MX53_PAD_PATA_IORDY__PATA_IORDY				0x28c 0x60c 0x000 0x0 0x0
-#define MX53_PAD_PATA_IORDY__GPIO7_5				0x28c 0x60c 0x000 0x1 0x0
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK				0x28c 0x60c 0x000 0x2 0x0
-#define MX53_PAD_PATA_IORDY__UART1_RTS				0x28c 0x60c 0x874 0x3 0x3
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN				0x28c 0x60c 0x764 0x4 0x1
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1			0x28c 0x60c 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_0__PATA_DA_0				0x290 0x610 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_0__GPIO7_6				0x290 0x610 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST				0x290 0x610 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE				0x290 0x610 0x864 0x4 0x0
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2			0x290 0x610 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_1__PATA_DA_1				0x294 0x614 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_1__GPIO7_7				0x294 0x614 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD				0x294 0x614 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_1__UART3_CTS				0x294 0x614 0x000 0x4 0x0
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3			0x294 0x614 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_2__PATA_DA_2				0x298 0x618 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_2__GPIO7_8				0x298 0x618 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK				0x298 0x618 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_2__UART3_RTS				0x298 0x618 0x884 0x4 0x5
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4			0x298 0x618 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_0__PATA_CS_0				0x29c 0x61c 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_0__GPIO7_9				0x29c 0x61c 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX			0x29c 0x61c 0x000 0x4 0x0
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5			0x29c 0x61c 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_1__PATA_CS_1				0x2a0 0x620 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_1__GPIO7_10				0x2a0 0x620 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX			0x2a0 0x620 0x888 0x4 0x3
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6			0x2a0 0x620 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0			0x2a4 0x628 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA0__GPIO2_0				0x2a4 0x628 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0			0x2a4 0x628 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4			0x2a4 0x628 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		0x2a4 0x628 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0			0x2a4 0x628 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7			0x2a4 0x628 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1			0x2a8 0x62c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA1__GPIO2_1				0x2a8 0x62c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1			0x2a8 0x62c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5			0x2a8 0x62c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		0x2a8 0x62c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1			0x2a8 0x62c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2			0x2ac 0x630 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA2__GPIO2_2				0x2ac 0x630 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2			0x2ac 0x630 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6			0x2ac 0x630 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		0x2ac 0x630 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2			0x2ac 0x630 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3			0x2b0 0x634 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA3__GPIO2_3				0x2b0 0x634 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3			0x2b0 0x634 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7			0x2b0 0x634 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		0x2b0 0x634 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3			0x2b0 0x634 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4			0x2b4 0x638 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA4__GPIO2_4				0x2b4 0x638 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4			0x2b4 0x638 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4			0x2b4 0x638 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		0x2b4 0x638 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4			0x2b4 0x638 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5			0x2b8 0x63c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA5__GPIO2_5				0x2b8 0x63c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5			0x2b8 0x63c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5			0x2b8 0x63c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		0x2b8 0x63c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5			0x2b8 0x63c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6			0x2bc 0x640 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA6__GPIO2_6				0x2bc 0x640 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6			0x2bc 0x640 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6			0x2bc 0x640 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		0x2bc 0x640 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6			0x2bc 0x640 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7			0x2c0 0x644 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA7__GPIO2_7				0x2c0 0x644 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7			0x2c0 0x644 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7			0x2c0 0x644 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		0x2c0 0x644 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7			0x2c0 0x644 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8			0x2c4 0x648 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA8__GPIO2_8				0x2c4 0x648 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4			0x2c4 0x648 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8			0x2c4 0x648 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0			0x2c4 0x648 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		0x2c4 0x648 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8			0x2c4 0x648 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9			0x2c8 0x64c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA9__GPIO2_9				0x2c8 0x64c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5			0x2c8 0x64c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9			0x2c8 0x64c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1			0x2c8 0x64c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		0x2c8 0x64c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9			0x2c8 0x64c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10			0x2cc 0x650 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA10__GPIO2_10				0x2cc 0x650 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6			0x2cc 0x650 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10			0x2cc 0x650 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2			0x2cc 0x650 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		0x2cc 0x650 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10			0x2cc 0x650 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11			0x2d0 0x654 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA11__GPIO2_11				0x2d0 0x654 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7			0x2d0 0x654 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11			0x2d0 0x654 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3			0x2d0 0x654 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		0x2d0 0x654 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11			0x2d0 0x654 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12			0x2d4 0x658 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA12__GPIO2_12				0x2d4 0x658 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4			0x2d4 0x658 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12			0x2d4 0x658 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0			0x2d4 0x658 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		0x2d4 0x658 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12			0x2d4 0x658 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13			0x2d8 0x65c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA13__GPIO2_13				0x2d8 0x65c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5			0x2d8 0x65c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13			0x2d8 0x65c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1			0x2d8 0x65c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		0x2d8 0x65c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13			0x2d8 0x65c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14			0x2dc 0x660 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA14__GPIO2_14				0x2dc 0x660 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6			0x2dc 0x660 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14			0x2dc 0x660 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2			0x2dc 0x660 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		0x2dc 0x660 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14			0x2dc 0x660 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15			0x2e0 0x664 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA15__GPIO2_15				0x2e0 0x664 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7			0x2e0 0x664 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15			0x2e0 0x664 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3			0x2e0 0x664 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		0x2e0 0x664 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15			0x2e0 0x664 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0				0x2e4 0x66c 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA0__GPIO1_16				0x2e4 0x66c 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1				0x2e4 0x66c 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA0__CSPI_MISO				0x2e4 0x66c 0x784 0x5 0x2
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP			0x2e4 0x66c 0x778 0x7 0x0
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1				0x2e8 0x670 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA1__GPIO1_17				0x2e8 0x670 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2				0x2e8 0x670 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA1__CSPI_SS0				0x2e8 0x670 0x78c 0x5 0x3
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP			0x2e8 0x670 0x77c 0x7 0x1
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD				0x2ec 0x674 0x000 0x0 0x0
-#define MX53_PAD_SD1_CMD__GPIO1_18				0x2ec 0x674 0x000 0x1 0x0
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1				0x2ec 0x674 0x000 0x3 0x0
-#define MX53_PAD_SD1_CMD__CSPI_MOSI				0x2ec 0x674 0x788 0x5 0x2
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP				0x2ec 0x674 0x770 0x7 0x0
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2				0x2f0 0x678 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA2__GPIO1_19				0x2f0 0x678 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2				0x2f0 0x678 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO				0x2f0 0x678 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B			0x2f0 0x678 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA2__CSPI_SS1				0x2f0 0x678 0x790 0x5 0x2
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		0x2f0 0x678 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP			0x2f0 0x678 0x774 0x7 0x0
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK				0x2f4 0x67c 0x000 0x0 0x0
-#define MX53_PAD_SD1_CLK__GPIO1_20				0x2f4 0x67c 0x000 0x1 0x0
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT			0x2f4 0x67c 0x000 0x2 0x0
-#define MX53_PAD_SD1_CLK__GPT_CLKIN				0x2f4 0x67c 0x000 0x3 0x0
-#define MX53_PAD_SD1_CLK__CSPI_SCLK				0x2f4 0x67c 0x780 0x5 0x2
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0			0x2f4 0x67c 0x000 0x7 0x0
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3				0x2f8 0x680 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA3__GPIO1_21				0x2f8 0x680 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3				0x2f8 0x680 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO				0x2f8 0x680 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B			0x2f8 0x680 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA3__CSPI_SS2				0x2f8 0x680 0x794 0x5 0x2
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		0x2f8 0x680 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1			0x2f8 0x680 0x000 0x7 0x0
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK				0x2fc 0x688 0x000 0x0 0x0
-#define MX53_PAD_SD2_CLK__GPIO1_10				0x2fc 0x688 0x000 0x1 0x0
-#define MX53_PAD_SD2_CLK__KPP_COL_5				0x2fc 0x688 0x840 0x2 0x2
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS			0x2fc 0x688 0x73c 0x3 0x1
-#define MX53_PAD_SD2_CLK__CSPI_SCLK				0x2fc 0x688 0x780 0x5 0x3
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V				0x2fc 0x688 0x000 0x7 0x0
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD				0x300 0x68c 0x000 0x0 0x0
-#define MX53_PAD_SD2_CMD__GPIO1_11				0x300 0x68c 0x000 0x1 0x0
-#define MX53_PAD_SD2_CMD__KPP_ROW_5				0x300 0x68c 0x84c 0x2 0x1
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC			0x300 0x68c 0x738 0x3 0x1
-#define MX53_PAD_SD2_CMD__CSPI_MOSI				0x300 0x68c 0x788 0x5 0x3
-#define MX53_PAD_SD2_CMD__SCC_RANDOM				0x300 0x68c 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3				0x304 0x690 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA3__GPIO1_12				0x304 0x690 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA3__KPP_COL_6				0x304 0x690 0x844 0x2 0x1
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC			0x304 0x690 0x740 0x3 0x1
-#define MX53_PAD_SD2_DATA3__CSPI_SS2				0x304 0x690 0x794 0x5 0x3
-#define MX53_PAD_SD2_DATA3__SJC_DONE				0x304 0x690 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2				0x308 0x694 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA2__GPIO1_13				0x308 0x694 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6				0x308 0x694 0x850 0x2 0x1
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD			0x308 0x694 0x734 0x3 0x1
-#define MX53_PAD_SD2_DATA2__CSPI_SS1				0x308 0x694 0x790 0x5 0x3
-#define MX53_PAD_SD2_DATA2__SJC_FAIL				0x308 0x694 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1				0x30c 0x698 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA1__GPIO1_14				0x30c 0x698 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA1__KPP_COL_7				0x30c 0x698 0x848 0x2 0x1
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS			0x30c 0x698 0x744 0x3 0x1
-#define MX53_PAD_SD2_DATA1__CSPI_SS0				0x30c 0x698 0x78c 0x5 0x4
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO			0x30c 0x698 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0				0x310 0x69c 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA0__GPIO1_15				0x310 0x69c 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7				0x310 0x69c 0x854 0x2 0x1
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD			0x310 0x69c 0x730 0x3 0x1
-#define MX53_PAD_SD2_DATA0__CSPI_MISO				0x310 0x69c 0x784 0x5 0x3
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT			0x310 0x69c 0x000 0x7 0x0
-#define MX53_PAD_GPIO_0__CCM_CLKO				0x314 0x6a4 0x000 0x0 0x0
-#define MX53_PAD_GPIO_0__GPIO1_0				0x314 0x6a4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_0__KPP_COL_5				0x314 0x6a4 0x840 0x2 0x3
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK			0x314 0x6a4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_0__EPIT1_EPITO				0x314 0x6a4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB				0x314 0x6a4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR			0x314 0x6a4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_0__CSU_TD					0x314 0x6a4 0x000 0x7 0x0
-#define MX53_PAD_GPIO_1__ESAI1_SCKR				0x318 0x6a8 0x7dc 0x0 0x1
-#define MX53_PAD_GPIO_1__GPIO1_1				0x318 0x6a8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_1__KPP_ROW_5				0x318 0x6a8 0x84c 0x2 0x2
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK			0x318 0x6a8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_1__PWM2_PWMO				0x318 0x6a8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B				0x318 0x6a8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_1__ESDHC1_CD				0x318 0x6a8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK				0x318 0x6a8 0x000 0x7 0x0
-#define MX53_PAD_GPIO_9__ESAI1_FSR				0x31c 0x6ac 0x7cc 0x0 0x1
-#define MX53_PAD_GPIO_9__GPIO1_9				0x31c 0x6ac 0x000 0x1 0x0
-#define MX53_PAD_GPIO_9__KPP_COL_6				0x31c 0x6ac 0x844 0x2 0x2
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B				0x31c 0x6ac 0x000 0x3 0x0
-#define MX53_PAD_GPIO_9__PWM1_PWMO				0x31c 0x6ac 0x000 0x4 0x0
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B				0x31c 0x6ac 0x000 0x5 0x0
-#define MX53_PAD_GPIO_9__ESDHC1_WP				0x31c 0x6ac 0x7fc 0x6 0x1
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE				0x31c 0x6ac 0x000 0x7 0x0
-#define MX53_PAD_GPIO_3__ESAI1_HCKR				0x320 0x6b0 0x7d4 0x0 0x1
-#define MX53_PAD_GPIO_3__GPIO1_3				0x320 0x6b0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_3__I2C3_SCL				0x320 0x6b0 0x824 0x2 0x1
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN				0x320 0x6b0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_3__CCM_CLKO2				0x320 0x6b0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		0x320 0x6b0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC			0x320 0x6b0 0x8a0 0x6 0x1
-#define MX53_PAD_GPIO_3__MLB_MLBCLK				0x320 0x6b0 0x858 0x7 0x2
-#define MX53_PAD_GPIO_6__ESAI1_SCKT				0x324 0x6b4 0x7e0 0x0 0x1
-#define MX53_PAD_GPIO_6__GPIO1_6				0x324 0x6b4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_6__I2C3_SDA				0x324 0x6b4 0x828 0x2 0x1
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0				0x324 0x6b4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB			0x324 0x6b4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		0x324 0x6b4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL				0x324 0x6b4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_6__MLB_MLBSIG				0x324 0x6b4 0x860 0x7 0x2
-#define MX53_PAD_GPIO_2__ESAI1_FST				0x328 0x6b8 0x7d0 0x0 0x1
-#define MX53_PAD_GPIO_2__GPIO1_2				0x328 0x6b8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_2__KPP_ROW_6				0x328 0x6b8 0x850 0x2 0x2
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1				0x328 0x6b8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0			0x328 0x6b8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		0x328 0x6b8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_2__ESDHC2_WP				0x328 0x6b8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_2__MLB_MLBDAT				0x328 0x6b8 0x85c 0x7 0x2
-#define MX53_PAD_GPIO_4__ESAI1_HCKT				0x32c 0x6bc 0x7d8 0x0 0x1
-#define MX53_PAD_GPIO_4__GPIO1_4				0x32c 0x6bc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_4__KPP_COL_7				0x32c 0x6bc 0x848 0x2 0x2
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2				0x32c 0x6bc 0x000 0x3 0x0
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1			0x32c 0x6bc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		0x32c 0x6bc 0x000 0x5 0x0
-#define MX53_PAD_GPIO_4__ESDHC2_CD				0x32c 0x6bc 0x000 0x6 0x0
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE				0x32c 0x6bc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3				0x330 0x6c0 0x7ec 0x0 0x1
-#define MX53_PAD_GPIO_5__GPIO1_5				0x330 0x6c0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_5__KPP_ROW_7				0x330 0x6c0 0x854 0x2 0x2
-#define MX53_PAD_GPIO_5__CCM_CLKO				0x330 0x6c0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2			0x330 0x6c0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		0x330 0x6c0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_5__I2C3_SCL				0x330 0x6c0 0x824 0x6 0x2
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP				0x330 0x6c0 0x770 0x7 0x1
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1				0x334 0x6c4 0x7f4 0x0 0x1
-#define MX53_PAD_GPIO_7__GPIO1_7				0x334 0x6c4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_7__EPIT1_EPITO				0x334 0x6c4 0x000 0x2 0x0
-#define MX53_PAD_GPIO_7__CAN1_TXCAN				0x334 0x6c4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX				0x334 0x6c4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_7__FIRI_RXD				0x334 0x6c4 0x80c 0x5 0x1
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK				0x334 0x6c4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP				0x334 0x6c4 0x774 0x7 0x1
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0				0x338 0x6c8 0x7f8 0x0 0x1
-#define MX53_PAD_GPIO_8__GPIO1_8				0x338 0x6c8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_8__EPIT2_EPITO				0x338 0x6c8 0x000 0x2 0x0
-#define MX53_PAD_GPIO_8__CAN1_RXCAN				0x338 0x6c8 0x760 0x3 0x2
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX				0x338 0x6c8 0x880 0x4 0x5
-#define MX53_PAD_GPIO_8__FIRI_TXD				0x338 0x6c8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK				0x338 0x6c8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP				0x338 0x6c8 0x778 0x7 0x1
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2				0x33c 0x6cc 0x7f0 0x0 0x1
-#define MX53_PAD_GPIO_16__GPIO7_11				0x33c 0x6cc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT			0x33c 0x6cc 0x000 0x2 0x0
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1			0x33c 0x6cc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_16__SPDIF_IN1				0x33c 0x6cc 0x870 0x5 0x1
-#define MX53_PAD_GPIO_16__I2C3_SDA				0x33c 0x6cc 0x828 0x6 0x2
-#define MX53_PAD_GPIO_16__SJC_DE_B				0x33c 0x6cc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_17__ESAI1_TX0				0x340 0x6d0 0x7e4 0x0 0x1
-#define MX53_PAD_GPIO_17__GPIO7_12				0x340 0x6d0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0			0x340 0x6d0 0x868 0x2 0x1
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY				0x340 0x6d0 0x810 0x3 0x1
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG			0x340 0x6d0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_17__SPDIF_OUT1				0x340 0x6d0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_17__IPU_SNOOP2				0x340 0x6d0 0x000 0x6 0x0
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT				0x340 0x6d0 0x000 0x7 0x0
-#define MX53_PAD_GPIO_18__ESAI1_TX1				0x344 0x6d4 0x7e8 0x0 0x1
-#define MX53_PAD_GPIO_18__GPIO7_13				0x344 0x6d4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1			0x344 0x6d4 0x86c 0x2 0x1
-#define MX53_PAD_GPIO_18__OWIRE_LINE				0x344 0x6d4 0x864 0x3 0x1
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		0x344 0x6d4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK			0x344 0x6d4 0x768 0x5 0x1
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL				0x344 0x6d4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST			0x344 0x6d4 0x000 0x7 0x0
-
-#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/src/arm/imx6dl-pinfunc.h b/src/arm/imx6dl-pinfunc.h
deleted file mode 100644
index 0ead323fdbd2..000000000000
--- a/src/arm/imx6dl-pinfunc.h
+++ /dev/null
@@ -1,1091 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6DL_PINFUNC_H
-#define __DTS_IMX6DL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
-#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
-#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
-#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
-#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x234 0x604 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x2dc 0x6c4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/src/arm/imx6q-pinfunc.h b/src/arm/imx6q-pinfunc.h
deleted file mode 100644
index 9fc6120a1853..000000000000
--- a/src/arm/imx6q-pinfunc.h
+++ /dev/null
@@ -1,1047 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6Q_PINFUNC_H
-#define __DTS_IMX6Q_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
-#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
-#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
-#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x230 0x600 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/src/arm/imx6qdl-microsom-ar8035.dtsi b/src/arm/imx6qdl-microsom-ar8035.dtsi
deleted file mode 100644
index d16066608e21..000000000000
--- a/src/arm/imx6qdl-microsom-ar8035.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
- * MicroSOM.
- */
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <2>;
-	phy-reset-gpios = <&gpio4 15 0>;
-	status = "okay";
-};
-
-&iomuxc {
-	enet {
-		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				/* AR8035 reset */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
-				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x80000000
-				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-
-				/*
-				 * As the RMII pins are also connected to RGMII
-				 * so that an AR8030 can be placed, set these
-				 * to high-z with the same pulls as above.
-				 * Use the GPIO settings to avoid changing the
-				 * input select registers.
-				 */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx6qdl-microsom.dtsi b/src/arm/imx6qdl-microsom.dtsi
deleted file mode 100644
index 79eac6849d4c..000000000000
--- a/src/arm/imx6qdl-microsom.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- */
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
diff --git a/src/arm/imx6qdl-phytec-pbab01.dtsi b/src/arm/imx6qdl-phytec-pbab01.dtsi
deleted file mode 100644
index 584721264121..000000000000
--- a/src/arm/imx6qdl-phytec-pbab01.dtsi
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	chosen {
-		linux,stdout-path = &uart4;
-	};
-};
-
-&fec {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	tlv320@18 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x18>;
-	};
-
-	stmpe@41 {
-		compatible = "st,stmpe811";
-		reg = <0x41>;
-	};
-
-	rtc@51 {
-		compatible = "nxp,rtc8564";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		reg = <0x64>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-		>;
-	};
-};
diff --git a/src/arm/imx6sl-pinfunc.h b/src/arm/imx6sl-pinfunc.h
deleted file mode 100644
index 77b17bcc7b70..000000000000
--- a/src/arm/imx6sl-pinfunc.h
+++ /dev/null
@@ -1,1077 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6SL_PINFUNC_H
-#define __DTS_IMX6SL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT          0x04c 0x2a4 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_MCLK__PWM4_OUT               0x04c 0x2a4 0x000 0x1 0x0
-#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY             0x04c 0x2a4 0x6b4 0x2 0x0
-#define MX6SL_PAD_AUD_MCLK__FEC_MDC                0x04c 0x2a4 0x000 0x3 0x0
-#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB      0x04c 0x2a4 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06             0x04c 0x2a4 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK          0x04c 0x2a4 0x7f4 0x6 0x0
-#define MX6SL_PAD_AUD_RXC__AUD3_RXC                0x050 0x2a8 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXC__I2C1_SDA                0x050 0x2a8 0x720 0x1 0x0
-#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA           0x050 0x2a8 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA           0x050 0x2a8 0x80c 0x2 0x0
-#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK              0x050 0x2a8 0x70c 0x3 0x0
-#define MX6SL_PAD_AUD_RXC__I2C3_SDA                0x050 0x2a8 0x730 0x4 0x0
-#define MX6SL_PAD_AUD_RXC__GPIO1_IO01              0x050 0x2a8 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1              0x050 0x2a8 0x6c4 0x6 0x0
-#define MX6SL_PAD_AUD_RXD__AUD3_RXD                0x054 0x2ac 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI             0x054 0x2ac 0x6bc 0x1 0x0
-#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA           0x054 0x2ac 0x814 0x2 0x0
-#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA           0x054 0x2ac 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXD__FEC_RX_ER               0x054 0x2ac 0x708 0x3 0x0
-#define MX6SL_PAD_AUD_RXD__SD1_LCTL                0x054 0x2ac 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_RXD__GPIO1_IO02              0x054 0x2ac 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS              0x058 0x2b0 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXFS__I2C1_SCL               0x058 0x2b0 0x71c 0x1 0x0
-#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA          0x058 0x2b0 0x80c 0x2 0x1
-#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA          0x058 0x2b0 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXFS__FEC_MDIO               0x058 0x2b0 0x6f4 0x3 0x0
-#define MX6SL_PAD_AUD_RXFS__I2C3_SCL               0x058 0x2b0 0x72c 0x4 0x0
-#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00             0x058 0x2b0 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0             0x058 0x2b0 0x6c0 0x6 0x0
-#define MX6SL_PAD_AUD_TXC__AUD3_TXC                0x05c 0x2b4 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO             0x05c 0x2b4 0x6b8 0x1 0x0
-#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA           0x05c 0x2b4 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA           0x05c 0x2b4 0x814 0x2 0x1
-#define MX6SL_PAD_AUD_TXC__FEC_RX_DV               0x05c 0x2b4 0x704 0x3 0x0
-#define MX6SL_PAD_AUD_TXC__SD2_LCTL                0x05c 0x2b4 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXC__GPIO1_IO03              0x05c 0x2b4 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_TXD__AUD3_TXD                0x060 0x2b8 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK             0x060 0x2b8 0x6b0 0x1 0x0
-#define MX6SL_PAD_AUD_TXD__UART4_CTS_B             0x060 0x2b8 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXD__UART4_RTS_B             0x060 0x2b8 0x810 0x2 0x0
-#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0            0x060 0x2b8 0x000 0x3 0x0
-#define MX6SL_PAD_AUD_TXD__SD4_LCTL                0x060 0x2b8 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXD__GPIO1_IO05              0x060 0x2b8 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS              0x064 0x2bc 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXFS__PWM3_OUT               0x064 0x2bc 0x000 0x1 0x0
-#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B            0x064 0x2bc 0x810 0x2 0x1
-#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B            0x064 0x2bc 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1           0x064 0x2bc 0x6fc 0x3 0x0
-#define MX6SL_PAD_AUD_TXFS__SD3_LCTL               0x064 0x2bc 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04             0x064 0x2bc 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO         0x068 0x358 0x684 0x0 0x0
-#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS           0x068 0x358 0x5f8 0x1 0x0
-#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B         0x068 0x358 0x818 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B         0x068 0x358 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0           0x068 0x358 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_MISO__SD2_WP              0x068 0x358 0x834 0x4 0x0
-#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10          0x068 0x358 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI         0x06c 0x35c 0x688 0x0 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC            0x06c 0x35c 0x5f4 0x1 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA       0x06c 0x35c 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA       0x06c 0x35c 0x81c 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1          0x06c 0x35c 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT         0x06c 0x35c 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09          0x06c 0x35c 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK         0x070 0x360 0x67c 0x0 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD            0x070 0x360 0x5e8 0x1 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA       0x070 0x360 0x81c 0x2 0x1
-#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA       0x070 0x360 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0          0x070 0x360 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET           0x070 0x360 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08          0x070 0x360 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC         0x070 0x360 0x820 0x6 0x0
-#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0           0x074 0x364 0x68c 0x0 0x0
-#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD             0x074 0x364 0x5e4 0x1 0x0
-#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B          0x074 0x364 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B          0x074 0x364 0x818 0x2 0x1
-#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1            0x074 0x364 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B             0x074 0x364 0x830 0x4 0x0
-#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11           0x074 0x364 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR         0x074 0x364 0x000 0x6 0x0
-#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO         0x078 0x368 0x6a0 0x0 0x0
-#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0     0x078 0x368 0x000 0x1 0x0
-#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B         0x078 0x368 0x808 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B         0x078 0x368 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK            0x078 0x368 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI2_MISO__SD1_WP              0x078 0x368 0x82c 0x4 0x0
-#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14          0x078 0x368 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC         0x078 0x368 0x824 0x6 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI         0x07c 0x36c 0x6a4 0x0 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1     0x07c 0x36c 0x000 0x1 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA       0x07c 0x36c 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA       0x07c 0x36c 0x80c 0x2 0x2
-#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC           0x07c 0x36c 0x670 0x3 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT         0x07c 0x36c 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13          0x07c 0x36c 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK         0x080 0x370 0x69c 0x0 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK       0x080 0x370 0x7f4 0x1 0x1
-#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA       0x080 0x370 0x80c 0x2 0x3
-#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA       0x080 0x370 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK          0x080 0x370 0x674 0x3 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET           0x080 0x370 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12          0x080 0x370 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC         0x080 0x370 0x820 0x6 0x1
-#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0           0x084 0x374 0x6a8 0x0 0x0
-#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3           0x084 0x374 0x698 0x1 0x0
-#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B          0x084 0x374 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B          0x084 0x374 0x808 0x2 0x1
-#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC            0x084 0x374 0x678 0x3 0x0
-#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B             0x084 0x374 0x828 0x4 0x0
-#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15           0x084 0x374 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR         0x084 0x374 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0             0x088 0x378 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_BDR0__SD4_CLK               0x088 0x378 0x850 0x1 0x0
-#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B           0x088 0x378 0x808 0x2 0x2
-#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B           0x088 0x378 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26            0x088 0x378 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_BDR0__SPDC_RL               0x088 0x378 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05            0x088 0x378 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7            0x088 0x378 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1             0x08c 0x37c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_BDR1__SD4_CMD               0x08c 0x37c 0x858 0x1 0x0
-#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B           0x08c 0x37c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B           0x08c 0x37c 0x808 0x2 0x3
-#define MX6SL_PAD_EPDC_BDR1__EIM_CRE               0x08c 0x37c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_BDR1__SPDC_UD               0x08c 0x37c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06            0x08c 0x37c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8            0x08c 0x37c 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_D0__EPDC_DATA00             0x090 0x380 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI             0x090 0x380 0x6d8 0x1 0x0
-#define MX6SL_PAD_EPDC_D0__LCD_DATA24              0x090 0x380 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D0__CSI_DATA00              0x090 0x380 0x630 0x3 0x0
-#define MX6SL_PAD_EPDC_D0__SPDC_DATA00             0x090 0x380 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D0__GPIO1_IO07              0x090 0x380 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D1__EPDC_DATA01             0x094 0x384 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO             0x094 0x384 0x6d4 0x1 0x0
-#define MX6SL_PAD_EPDC_D1__LCD_DATA25              0x094 0x384 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D1__CSI_DATA01              0x094 0x384 0x634 0x3 0x0
-#define MX6SL_PAD_EPDC_D1__SPDC_DATA01             0x094 0x384 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D1__GPIO1_IO08              0x094 0x384 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D10__EPDC_DATA10            0x098 0x388 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0             0x098 0x388 0x6c0 0x1 0x1
-#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2         0x098 0x388 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D10__EIM_ADDR18             0x098 0x388 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D10__SPDC_DATA10            0x098 0x388 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D10__GPIO1_IO17             0x098 0x388 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D10__SD4_WP                 0x098 0x388 0x87c 0x6 0x0
-#define MX6SL_PAD_EPDC_D11__EPDC_DATA11            0x09c 0x38c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK            0x09c 0x38c 0x6b0 0x1 0x1
-#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3         0x09c 0x38c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D11__EIM_ADDR19             0x09c 0x38c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D11__SPDC_DATA11            0x09c 0x38c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D11__GPIO1_IO18             0x09c 0x38c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D11__SD4_CD_B               0x09c 0x38c 0x854 0x6 0x0
-#define MX6SL_PAD_EPDC_D12__EPDC_DATA12            0x0a0 0x390 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA          0x0a0 0x390 0x804 0x1 0x0
-#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA          0x0a0 0x390 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM           0x0a0 0x390 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D12__EIM_ADDR20             0x0a0 0x390 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D12__SPDC_DATA12            0x0a0 0x390 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D12__GPIO1_IO19             0x0a0 0x390 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1             0x0a0 0x390 0x6c4 0x6 0x1
-#define MX6SL_PAD_EPDC_D13__EPDC_DATA13            0x0a4 0x394 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA          0x0a4 0x394 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA          0x0a4 0x394 0x804 0x1 0x1
-#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ           0x0a4 0x394 0x6e8 0x2 0x0
-#define MX6SL_PAD_EPDC_D13__EIM_ADDR21             0x0a4 0x394 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D13__SPDC_DATA13            0x0a4 0x394 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D13__GPIO1_IO20             0x0a4 0x394 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2             0x0a4 0x394 0x6c8 0x6 0x0
-#define MX6SL_PAD_EPDC_D14__EPDC_DATA14            0x0a8 0x398 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D14__UART2_RTS_B            0x0a8 0x398 0x800 0x1 0x0
-#define MX6SL_PAD_EPDC_D14__UART2_CTS_B            0x0a8 0x398 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT          0x0a8 0x398 0x6ec 0x2 0x0
-#define MX6SL_PAD_EPDC_D14__EIM_ADDR22             0x0a8 0x398 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D14__SPDC_DATA14            0x0a8 0x398 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D14__GPIO1_IO21             0x0a8 0x398 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3             0x0a8 0x398 0x6cc 0x6 0x0
-#define MX6SL_PAD_EPDC_D15__EPDC_DATA15            0x0ac 0x39c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D15__UART2_CTS_B            0x0ac 0x39c 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D15__UART2_RTS_B            0x0ac 0x39c 0x800 0x1 0x1
-#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE          0x0ac 0x39c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D15__EIM_ADDR23             0x0ac 0x39c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D15__SPDC_DATA15            0x0ac 0x39c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D15__GPIO1_IO22             0x0ac 0x39c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY             0x0ac 0x39c 0x6b4 0x6 0x1
-#define MX6SL_PAD_EPDC_D2__EPDC_DATA02             0x0b0 0x3a0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0              0x0b0 0x3a0 0x6dc 0x1 0x0
-#define MX6SL_PAD_EPDC_D2__LCD_DATA26              0x0b0 0x3a0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D2__CSI_DATA02              0x0b0 0x3a0 0x638 0x3 0x0
-#define MX6SL_PAD_EPDC_D2__SPDC_DATA02             0x0b0 0x3a0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D2__GPIO1_IO09              0x0b0 0x3a0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D3__EPDC_DATA03             0x0b4 0x3a4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK             0x0b4 0x3a4 0x6d0 0x1 0x0
-#define MX6SL_PAD_EPDC_D3__LCD_DATA27              0x0b4 0x3a4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D3__CSI_DATA03              0x0b4 0x3a4 0x63c 0x3 0x0
-#define MX6SL_PAD_EPDC_D3__SPDC_DATA03             0x0b4 0x3a4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D3__GPIO1_IO10              0x0b4 0x3a4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D4__EPDC_DATA04             0x0b8 0x3a8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1              0x0b8 0x3a8 0x6e0 0x1 0x0
-#define MX6SL_PAD_EPDC_D4__LCD_DATA28              0x0b8 0x3a8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D4__CSI_DATA04              0x0b8 0x3a8 0x640 0x3 0x0
-#define MX6SL_PAD_EPDC_D4__SPDC_DATA04             0x0b8 0x3a8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D4__GPIO1_IO11              0x0b8 0x3a8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D5__EPDC_DATA05             0x0bc 0x3ac 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2              0x0bc 0x3ac 0x6e4 0x1 0x0
-#define MX6SL_PAD_EPDC_D5__LCD_DATA29              0x0bc 0x3ac 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D5__CSI_DATA05              0x0bc 0x3ac 0x644 0x3 0x0
-#define MX6SL_PAD_EPDC_D5__SPDC_DATA05             0x0bc 0x3ac 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D5__GPIO1_IO12              0x0bc 0x3ac 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D6__EPDC_DATA06             0x0c0 0x3b0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3              0x0c0 0x3b0 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D6__LCD_DATA30              0x0c0 0x3b0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D6__CSI_DATA06              0x0c0 0x3b0 0x648 0x3 0x0
-#define MX6SL_PAD_EPDC_D6__SPDC_DATA06             0x0c0 0x3b0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D6__GPIO1_IO13              0x0c0 0x3b0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D7__EPDC_DATA07             0x0c4 0x3b4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY              0x0c4 0x3b4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D7__LCD_DATA31              0x0c4 0x3b4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D7__CSI_DATA07              0x0c4 0x3b4 0x64c 0x3 0x0
-#define MX6SL_PAD_EPDC_D7__SPDC_DATA07             0x0c4 0x3b4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D7__GPIO1_IO14              0x0c4 0x3b4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D8__EPDC_DATA08             0x0c8 0x3b8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI             0x0c8 0x3b8 0x6bc 0x1 0x1
-#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0          0x0c8 0x3b8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D8__EIM_ADDR16              0x0c8 0x3b8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D8__SPDC_DATA08             0x0c8 0x3b8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D8__GPIO1_IO15              0x0c8 0x3b8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D8__SD4_RESET               0x0c8 0x3b8 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_D9__EPDC_DATA09             0x0cc 0x3bc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO             0x0cc 0x3bc 0x6b8 0x1 0x1
-#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1          0x0cc 0x3bc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D9__EIM_ADDR17              0x0cc 0x3bc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D9__SPDC_DATA09             0x0cc 0x3bc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D9__GPIO1_IO16              0x0cc 0x3bc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D9__SD4_VSELECT             0x0cc 0x3bc 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK           0x0d0 0x3c0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2           0x0d0 0x3c0 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR            0x0d0 0x3c0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK           0x0d0 0x3c0 0x674 0x3 0x1
-#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL            0x0d0 0x3c0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31           0x0d0 0x3c0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET            0x0d0 0x3c0 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE             0x0d4 0x3c4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3            0x0d4 0x3c4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER             0x0d4 0x3c4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC             0x0d4 0x3c4 0x670 0x3 0x1
-#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL             0x0d4 0x3c4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00            0x0d4 0x3c4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT           0x0d4 0x3c4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL             0x0d8 0x3c8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY            0x0d8 0x3c8 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR           0x0d8 0x3c8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK              0x0d8 0x3c8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL           0x0d8 0x3c8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01            0x0d8 0x3c8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDRL__SD2_WP                0x0d8 0x3c8 0x834 0x6 0x1
-#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP             0x0dc 0x3cc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT              0x0dc 0x3cc 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR           0x0dc 0x3cc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC             0x0dc 0x3cc 0x678 0x3 0x1
-#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL           0x0dc 0x3cc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02            0x0dc 0x3cc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B              0x0dc 0x3cc 0x830 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM        0x0e0 0x3d0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0           0x0e0 0x3d0 0x85c 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20          0x0e0 0x3d0 0x7c8 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK            0x0e0 0x3d0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID         0x0e0 0x3d0 0x5dc 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11          0x0e0 0x3d0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET           0x0e0 0x3d0 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0    0x0e4 0x3d4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC          0x0e4 0x3d4 0x604 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16        0x0e4 0x3d4 0x7b8 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW            0x0e4 0x3d4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL         0x0e4 0x3d4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07        0x0e4 0x3d4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET         0x0e4 0x3d4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1    0x0e8 0x3d8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS         0x0e8 0x3d8 0x610 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17        0x0e8 0x3d8 0x7bc 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B          0x0e8 0x3d8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL         0x0e8 0x3d8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08        0x0e8 0x3d8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT       0x0e8 0x3d8 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2    0x0ec 0x3dc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD          0x0ec 0x3dc 0x600 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18        0x0ec 0x3dc 0x7c0 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B         0x0ec 0x3dc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL       0x0ec 0x3dc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09        0x0ec 0x3dc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP            0x0ec 0x3dc 0x87c 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3    0x0f0 0x3e0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC          0x0f0 0x3e0 0x60c 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19        0x0f0 0x3e0 0x7c4 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B         0x0f0 0x3e0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL       0x0f0 0x3e0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10        0x0f0 0x3e0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B          0x0f0 0x3e0 0x854 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ        0x0f4 0x3e4 0x6e8 0x0 0x1
-#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1           0x0f4 0x3e4 0x860 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21          0x0f4 0x3e4 0x7cc 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN    0x0f4 0x3e4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID         0x0f4 0x3e4 0x5e0 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12          0x0f4 0x3e4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT         0x0f4 0x3e4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT      0x0f8 0x3e8 0x6ec 0x0 0x1
-#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2          0x0f8 0x3e8 0x864 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22         0x0f8 0x3e8 0x7d0 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B         0x0f8 0x3e8 0x884 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI         0x0f8 0x3e8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13         0x0f8 0x3e8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP             0x0f8 0x3e8 0x84c 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE    0x0fc 0x3ec 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3        0x0fc 0x3ec 0x868 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23       0x0fc 0x3ec 0x7d4 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B      0x0fc 0x3ec 0x880 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO       0x0fc 0x3ec 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14       0x0fc 0x3ec 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B         0x0fc 0x3ec 0x838 0x6 0x0
-#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0           0x100 0x3f0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1           0x100 0x3f0 0x6ac 0x1 0x0
-#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT             0x100 0x3f0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B            0x100 0x3f0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR            0x100 0x3f0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27           0x100 0x3f0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1           0x104 0x3f4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B              0x104 0x3f4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT             0x104 0x3f4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B            0x104 0x3f4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER            0x104 0x3f4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28           0x104 0x3f4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2           0x108 0x3f8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL             0x108 0x3f8 0x72c 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT             0x108 0x3f8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B            0x108 0x3f8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR          0x108 0x3f8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29           0x108 0x3f8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3           0x10c 0x3fc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA             0x10c 0x3fc 0x730 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT             0x10c 0x3fc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B            0x10c 0x3fc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR          0x10c 0x3fc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30           0x10c 0x3fc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P         0x110 0x400 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI          0x110 0x400 0x6a4 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL             0x110 0x400 0x724 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08           0x110 0x400 0x650 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL              0x110 0x400 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23           0x110 0x400 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE             0x114 0x404 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO           0x114 0x404 0x6a0 0x1 0x1
-#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA              0x114 0x404 0x728 0x2 0x0
-#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09            0x114 0x404 0x654 0x3 0x0
-#define MX6SL_PAD_EPDC_SDLE__SPDC_LD               0x114 0x404 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24            0x114 0x404 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE             0x118 0x408 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0            0x118 0x408 0x6a8 0x1 0x1
-#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR            0x118 0x408 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10            0x118 0x408 0x658 0x3 0x0
-#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL            0x118 0x408 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25            0x118 0x408 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR           0x11c 0x40c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK          0x11c 0x40c 0x69c 0x1 0x1
-#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4           0x11c 0x40c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11           0x11c 0x40c 0x65c 0x3 0x0
-#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR           0x11c 0x40c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26           0x11c 0x40c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0           0x120 0x410 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS            0x120 0x410 0x608 0x1 0x0
-#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA        0x120 0x410 0x80c 0x2 0x4
-#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA        0x120 0x410 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24           0x120 0x410 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0           0x120 0x410 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03           0x120 0x410 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5           0x120 0x410 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1           0x124 0x414 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD             0x124 0x414 0x5fc 0x1 0x0
-#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA        0x124 0x414 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA        0x124 0x414 0x80c 0x2 0x5
-#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25           0x124 0x414 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1           0x124 0x414 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04           0x124 0x414 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6           0x124 0x414 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV            0x128 0x418 0x704 0x0 0x1
-#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1            0x128 0x418 0x860 0x1 0x1
-#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC             0x128 0x418 0x624 0x2 0x0
-#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO          0x128 0x418 0x6d4 0x3 0x1
-#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2         0x128 0x418 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25           0x128 0x418 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31          0x128 0x418 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_MDC__FEC_MDC                 0x12c 0x41c 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_MDC__SD4_DATA4               0x12c 0x41c 0x86c 0x1 0x0
-#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT           0x12c 0x41c 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_MDC__SD1_RESET               0x12c 0x41c 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_MDC__SD3_RESET               0x12c 0x41c 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_MDC__GPIO4_IO23              0x12c 0x41c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_MDC__ARM_TRACE29             0x12c 0x41c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_MDIO__FEC_MDIO               0x130 0x420 0x6f4 0x0 0x1
-#define MX6SL_PAD_FEC_MDIO__SD4_CLK                0x130 0x420 0x850 0x1 0x1
-#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS              0x130 0x420 0x620 0x2 0x0
-#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0             0x130 0x420 0x6dc 0x3 0x1
-#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1           0x130 0x420 0x710 0x4 0x0
-#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20             0x130 0x420 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26            0x130 0x420 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT         0x134 0x424 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET           0x134 0x424 0x000 0x1 0x0
-#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B             0x134 0x424 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT            0x134 0x424 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY      0x134 0x424 0x62c 0x4 0x0
-#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26          0x134 0x424 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK       0x134 0x424 0x7f4 0x6 0x2
-#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER             0x138 0x428 0x708 0x0 0x1
-#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0             0x138 0x428 0x85c 0x1 0x1
-#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD              0x138 0x428 0x614 0x2 0x0
-#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI           0x138 0x428 0x6d8 0x3 0x1
-#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1          0x138 0x428 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19            0x138 0x428 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25           0x138 0x428 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0           0x13c 0x42c 0x6f8 0x0 0x0
-#define MX6SL_PAD_FEC_RXD0__SD4_DATA5              0x13c 0x42c 0x870 0x1 0x0
-#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID            0x13c 0x42c 0x5dc 0x2 0x1
-#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT            0x13c 0x42c 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT            0x13c 0x42c 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17             0x13c 0x42c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24            0x13c 0x42c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1           0x140 0x430 0x6fc 0x0 0x1
-#define MX6SL_PAD_FEC_RXD1__SD4_DATA2              0x140 0x430 0x864 0x1 0x1
-#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS              0x140 0x430 0x628 0x2 0x0
-#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1             0x140 0x430 0x6e0 0x3 0x1
-#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3           0x140 0x430 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18             0x140 0x430 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RXD1__FEC_COL                0x140 0x430 0x6f0 0x6 0x0
-#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK           0x144 0x434 0x70c 0x0 0x1
-#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD              0x144 0x434 0x858 0x1 0x1
-#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC             0x144 0x434 0x61c 0x2 0x0
-#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK          0x144 0x434 0x6d0 0x3 0x1
-#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2         0x144 0x434 0x714 0x4 0x0
-#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21           0x144 0x434 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27          0x144 0x434 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN             0x148 0x438 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6             0x148 0x438 0x874 0x1 0x0
-#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN              0x148 0x438 0x7f0 0x2 0x0
-#define MX6SL_PAD_FEC_TX_EN__SD1_WP                0x148 0x438 0x82c 0x3 0x1
-#define MX6SL_PAD_FEC_TX_EN__SD3_WP                0x148 0x438 0x84c 0x4 0x1
-#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22            0x148 0x438 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28           0x148 0x438 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0           0x14c 0x43c 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TXD0__SD4_DATA3              0x14c 0x43c 0x868 0x1 0x1
-#define MX6SL_PAD_FEC_TXD0__AUD6_TXD               0x14c 0x43c 0x618 0x2 0x0
-#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2             0x14c 0x43c 0x6e4 0x3 0x1
-#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN              0x14c 0x43c 0x718 0x4 0x0
-#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24             0x14c 0x43c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30            0x14c 0x43c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1           0x150 0x440 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TXD1__SD4_DATA7              0x150 0x440 0x878 0x1 0x0
-#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT              0x150 0x440 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_TXD1__SD1_CD_B               0x150 0x440 0x828 0x3 0x1
-#define MX6SL_PAD_FEC_TXD1__SD3_CD_B               0x150 0x440 0x838 0x4 0x1
-#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16             0x150 0x440 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK             0x150 0x440 0x700 0x6 0x0
-#define MX6SL_PAD_HSIC_DAT__USB_H_DATA             0x154 0x444 0x000 0x0 0x0
-#define MX6SL_PAD_HSIC_DAT__I2C1_SCL               0x154 0x444 0x71c 0x1 0x1
-#define MX6SL_PAD_HSIC_DAT__PWM1_OUT               0x154 0x444 0x000 0x2 0x0
-#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M    0x154 0x444 0x000 0x3 0x0
-#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19             0x154 0x444 0x000 0x5 0x0
-#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE        0x158 0x448 0x000 0x0 0x0
-#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA            0x158 0x448 0x720 0x1 0x1
-#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT            0x158 0x448 0x000 0x2 0x0
-#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0
-#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20          0x158 0x448 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SCL__I2C1_SCL               0x15c 0x44c 0x71c 0x0 0x2
-#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B            0x15c 0x44c 0x7f8 0x1 0x0
-#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B            0x15c 0x44c 0x000 0x1 0x0
-#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2             0x15c 0x44c 0x6c8 0x2 0x1
-#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0           0x15c 0x44c 0x6f8 0x3 0x1
-#define MX6SL_PAD_I2C1_SCL__SD3_RESET              0x15c 0x44c 0x000 0x4 0x0
-#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12             0x15c 0x44c 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1             0x15c 0x44c 0x690 0x6 0x0
-#define MX6SL_PAD_I2C1_SDA__I2C1_SDA               0x160 0x450 0x720 0x0 0x2
-#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B            0x160 0x450 0x000 0x1 0x0
-#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B            0x160 0x450 0x7f8 0x1 0x1
-#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3             0x160 0x450 0x6cc 0x2 0x1
-#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN              0x160 0x450 0x000 0x3 0x0
-#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT            0x160 0x450 0x000 0x4 0x0
-#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13             0x160 0x450 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2             0x160 0x450 0x694 0x6 0x0
-#define MX6SL_PAD_I2C2_SCL__I2C2_SCL               0x164 0x454 0x724 0x0 0x1
-#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS              0x164 0x454 0x5f0 0x1 0x0
-#define MX6SL_PAD_I2C2_SCL__SPDIF_IN               0x164 0x454 0x7f0 0x2 0x1
-#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1           0x164 0x454 0x000 0x3 0x0
-#define MX6SL_PAD_I2C2_SCL__SD3_WP                 0x164 0x454 0x84c 0x4 0x2
-#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14             0x164 0x454 0x000 0x5 0x0
-#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY             0x164 0x454 0x680 0x6 0x0
-#define MX6SL_PAD_I2C2_SDA__I2C2_SDA               0x168 0x458 0x728 0x0 0x1
-#define MX6SL_PAD_I2C2_SDA__AUD4_RXC               0x168 0x458 0x5ec 0x1 0x0
-#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT              0x168 0x458 0x000 0x2 0x0
-#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT            0x168 0x458 0x000 0x3 0x0
-#define MX6SL_PAD_I2C2_SDA__SD3_CD_B               0x168 0x458 0x838 0x4 0x2
-#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15             0x168 0x458 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL0__KEY_COL0               0x16c 0x474 0x734 0x0 0x0
-#define MX6SL_PAD_KEY_COL0__I2C2_SCL               0x16c 0x474 0x724 0x1 0x2
-#define MX6SL_PAD_KEY_COL0__LCD_DATA00             0x16c 0x474 0x778 0x2 0x0
-#define MX6SL_PAD_KEY_COL0__EIM_AD00               0x16c 0x474 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL0__SD1_CD_B               0x16c 0x474 0x828 0x4 0x2
-#define MX6SL_PAD_KEY_COL0__GPIO3_IO24             0x16c 0x474 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL1__KEY_COL1               0x170 0x478 0x738 0x0 0x0
-#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI            0x170 0x478 0x6d8 0x1 0x2
-#define MX6SL_PAD_KEY_COL1__LCD_DATA02             0x170 0x478 0x780 0x2 0x0
-#define MX6SL_PAD_KEY_COL1__EIM_AD02               0x170 0x478 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL1__SD3_DATA4              0x170 0x478 0x83c 0x4 0x0
-#define MX6SL_PAD_KEY_COL1__GPIO3_IO26             0x170 0x478 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL2__KEY_COL2               0x174 0x47c 0x73c 0x0 0x0
-#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0             0x174 0x47c 0x6dc 0x1 0x2
-#define MX6SL_PAD_KEY_COL2__LCD_DATA04             0x174 0x47c 0x788 0x2 0x0
-#define MX6SL_PAD_KEY_COL2__EIM_AD04               0x174 0x47c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL2__SD3_DATA6              0x174 0x47c 0x844 0x4 0x0
-#define MX6SL_PAD_KEY_COL2__GPIO3_IO28             0x174 0x47c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL3__KEY_COL3               0x178 0x480 0x740 0x0 0x0
-#define MX6SL_PAD_KEY_COL3__AUD6_RXFS              0x178 0x480 0x620 0x1 0x1
-#define MX6SL_PAD_KEY_COL3__LCD_DATA06             0x178 0x480 0x790 0x2 0x0
-#define MX6SL_PAD_KEY_COL3__EIM_AD06               0x178 0x480 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL3__SD4_DATA6              0x178 0x480 0x874 0x4 0x1
-#define MX6SL_PAD_KEY_COL3__GPIO3_IO30             0x178 0x480 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL3__SD1_RESET              0x178 0x480 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL4__KEY_COL4               0x17c 0x484 0x744 0x0 0x0
-#define MX6SL_PAD_KEY_COL4__AUD6_RXD               0x17c 0x484 0x614 0x1 0x1
-#define MX6SL_PAD_KEY_COL4__LCD_DATA08             0x17c 0x484 0x798 0x2 0x0
-#define MX6SL_PAD_KEY_COL4__EIM_AD08               0x17c 0x484 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL4__SD4_CLK                0x17c 0x484 0x850 0x4 0x2
-#define MX6SL_PAD_KEY_COL4__GPIO4_IO00             0x17c 0x484 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR           0x17c 0x484 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL5__KEY_COL5               0x180 0x488 0x748 0x0 0x0
-#define MX6SL_PAD_KEY_COL5__AUD6_TXFS              0x180 0x488 0x628 0x1 0x1
-#define MX6SL_PAD_KEY_COL5__LCD_DATA10             0x180 0x488 0x7a0 0x2 0x0
-#define MX6SL_PAD_KEY_COL5__EIM_AD10               0x180 0x488 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL5__SD4_DATA0              0x180 0x488 0x85c 0x4 0x2
-#define MX6SL_PAD_KEY_COL5__GPIO4_IO02             0x180 0x488 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR           0x180 0x488 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL6__KEY_COL6               0x184 0x48c 0x74c 0x0 0x0
-#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA          0x184 0x48c 0x814 0x1 0x2
-#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA          0x184 0x48c 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_COL6__LCD_DATA12             0x184 0x48c 0x7a8 0x2 0x0
-#define MX6SL_PAD_KEY_COL6__EIM_AD12               0x184 0x48c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL6__SD4_DATA2              0x184 0x48c 0x864 0x4 0x2
-#define MX6SL_PAD_KEY_COL6__GPIO4_IO04             0x184 0x48c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL6__SD3_RESET              0x184 0x48c 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL7__KEY_COL7               0x188 0x490 0x750 0x0 0x0
-#define MX6SL_PAD_KEY_COL7__UART4_RTS_B            0x188 0x490 0x810 0x1 0x2
-#define MX6SL_PAD_KEY_COL7__UART4_CTS_B            0x188 0x490 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_COL7__LCD_DATA14             0x188 0x490 0x7b0 0x2 0x0
-#define MX6SL_PAD_KEY_COL7__EIM_AD14               0x188 0x490 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL7__SD4_DATA4              0x188 0x490 0x86c 0x4 0x1
-#define MX6SL_PAD_KEY_COL7__GPIO4_IO06             0x188 0x490 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL7__SD1_WP                 0x188 0x490 0x82c 0x6 0x2
-#define MX6SL_PAD_KEY_ROW0__KEY_ROW0               0x18c 0x494 0x754 0x0 0x0
-#define MX6SL_PAD_KEY_ROW0__I2C2_SDA               0x18c 0x494 0x728 0x1 0x2
-#define MX6SL_PAD_KEY_ROW0__LCD_DATA01             0x18c 0x494 0x77c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW0__EIM_AD01               0x18c 0x494 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW0__SD1_WP                 0x18c 0x494 0x82c 0x4 0x3
-#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25             0x18c 0x494 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW1__KEY_ROW1               0x190 0x498 0x758 0x0 0x0
-#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO            0x190 0x498 0x6d4 0x1 0x2
-#define MX6SL_PAD_KEY_ROW1__LCD_DATA03             0x190 0x498 0x784 0x2 0x0
-#define MX6SL_PAD_KEY_ROW1__EIM_AD03               0x190 0x498 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW1__SD3_DATA5              0x190 0x498 0x840 0x4 0x0
-#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27             0x190 0x498 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW2__KEY_ROW2               0x194 0x49c 0x75c 0x0 0x0
-#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK            0x194 0x49c 0x6d0 0x1 0x2
-#define MX6SL_PAD_KEY_ROW2__LCD_DATA05             0x194 0x49c 0x78c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW2__EIM_AD05               0x194 0x49c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW2__SD3_DATA7              0x194 0x49c 0x848 0x4 0x0
-#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29             0x194 0x49c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW3__KEY_ROW3               0x198 0x4a0 0x760 0x0 0x0
-#define MX6SL_PAD_KEY_ROW3__AUD6_RXC               0x198 0x4a0 0x61c 0x1 0x1
-#define MX6SL_PAD_KEY_ROW3__LCD_DATA07             0x198 0x4a0 0x794 0x2 0x0
-#define MX6SL_PAD_KEY_ROW3__EIM_AD07               0x198 0x4a0 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW3__SD4_DATA7              0x198 0x4a0 0x878 0x4 0x1
-#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31             0x198 0x4a0 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT            0x198 0x4a0 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_ROW4__KEY_ROW4               0x19c 0x4a4 0x764 0x0 0x0
-#define MX6SL_PAD_KEY_ROW4__AUD6_TXC               0x19c 0x4a4 0x624 0x1 0x1
-#define MX6SL_PAD_KEY_ROW4__LCD_DATA09             0x19c 0x4a4 0x79c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW4__EIM_AD09               0x19c 0x4a4 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW4__SD4_CMD                0x19c 0x4a4 0x858 0x4 0x2
-#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01             0x19c 0x4a4 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC            0x19c 0x4a4 0x824 0x6 0x1
-#define MX6SL_PAD_KEY_ROW5__KEY_ROW5               0x1a0 0x4a8 0x768 0x0 0x0
-#define MX6SL_PAD_KEY_ROW5__AUD6_TXD               0x1a0 0x4a8 0x618 0x1 0x1
-#define MX6SL_PAD_KEY_ROW5__LCD_DATA11             0x1a0 0x4a8 0x7a4 0x2 0x0
-#define MX6SL_PAD_KEY_ROW5__EIM_AD11               0x1a0 0x4a8 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW5__SD4_DATA1              0x1a0 0x4a8 0x860 0x4 0x2
-#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03             0x1a0 0x4a8 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC            0x1a0 0x4a8 0x820 0x6 0x2
-#define MX6SL_PAD_KEY_ROW6__KEY_ROW6               0x1a4 0x4ac 0x76c 0x0 0x0
-#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA          0x1a4 0x4ac 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA          0x1a4 0x4ac 0x814 0x1 0x3
-#define MX6SL_PAD_KEY_ROW6__LCD_DATA13             0x1a4 0x4ac 0x7ac 0x2 0x0
-#define MX6SL_PAD_KEY_ROW6__EIM_AD13               0x1a4 0x4ac 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW6__SD4_DATA3              0x1a4 0x4ac 0x868 0x4 0x2
-#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05             0x1a4 0x4ac 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT            0x1a4 0x4ac 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_ROW7__KEY_ROW7               0x1a8 0x4b0 0x770 0x0 0x0
-#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B            0x1a8 0x4b0 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B            0x1a8 0x4b0 0x810 0x1 0x3
-#define MX6SL_PAD_KEY_ROW7__LCD_DATA15             0x1a8 0x4b0 0x7b4 0x2 0x0
-#define MX6SL_PAD_KEY_ROW7__EIM_AD15               0x1a8 0x4b0 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW7__SD4_DATA5              0x1a8 0x4b0 0x870 0x4 0x1
-#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07             0x1a8 0x4b0 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW7__SD1_CD_B               0x1a8 0x4b0 0x828 0x6 0x3
-#define MX6SL_PAD_LCD_CLK__LCD_CLK                 0x1ac 0x4b4 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_CLK__SD4_DATA4               0x1ac 0x4b4 0x86c 0x1 0x2
-#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN              0x1ac 0x4b4 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_CLK__EIM_RW                  0x1ac 0x4b4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_CLK__PWM4_OUT                0x1ac 0x4b4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_CLK__GPIO2_IO15              0x1ac 0x4b4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT0__LCD_DATA00             0x1b0 0x4b8 0x778 0x0 0x1
-#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI            0x1b0 0x4b8 0x688 0x1 0x1
-#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID            0x1b0 0x4b8 0x5e0 0x2 0x1
-#define MX6SL_PAD_LCD_DAT0__PWM1_OUT               0x1b0 0x4b8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B            0x1b0 0x4b8 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20             0x1b0 0x4b8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00            0x1b0 0x4b8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00         0x1b0 0x4b8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT1__LCD_DATA01             0x1b4 0x4bc 0x77c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO            0x1b4 0x4bc 0x684 0x1 0x1
-#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID            0x1b4 0x4bc 0x5dc 0x2 0x2
-#define MX6SL_PAD_LCD_DAT1__PWM2_OUT               0x1b4 0x4bc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS              0x1b4 0x4bc 0x5f0 0x4 0x1
-#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21             0x1b4 0x4bc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01            0x1b4 0x4bc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01         0x1b4 0x4bc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT10__LCD_DATA10            0x1b8 0x4c0 0x7a0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT10__KEY_COL1              0x1b8 0x4c0 0x738 0x1 0x1
-#define MX6SL_PAD_LCD_DAT10__CSI_DATA07            0x1b8 0x4c0 0x64c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT10__EIM_DATA04            0x1b8 0x4c0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO           0x1b8 0x4c0 0x6a0 0x4 0x2
-#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30            0x1b8 0x4c0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10           0x1b8 0x4c0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10        0x1b8 0x4c0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT11__LCD_DATA11            0x1bc 0x4c4 0x7a4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT11__KEY_ROW1              0x1bc 0x4c4 0x758 0x1 0x1
-#define MX6SL_PAD_LCD_DAT11__CSI_DATA06            0x1bc 0x4c4 0x648 0x2 0x1
-#define MX6SL_PAD_LCD_DAT11__EIM_DATA05            0x1bc 0x4c4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1            0x1bc 0x4c4 0x6ac 0x4 0x1
-#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31            0x1bc 0x4c4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11           0x1bc 0x4c4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11        0x1bc 0x4c4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT12__LCD_DATA12            0x1c0 0x4c8 0x7a8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT12__KEY_COL2              0x1c0 0x4c8 0x73c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT12__CSI_DATA05            0x1c0 0x4c8 0x644 0x2 0x1
-#define MX6SL_PAD_LCD_DAT12__EIM_DATA06            0x1c0 0x4c8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B           0x1c0 0x4c8 0x818 0x4 0x2
-#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B           0x1c0 0x4c8 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00            0x1c0 0x4c8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12           0x1c0 0x4c8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12        0x1c0 0x4c8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT13__LCD_DATA13            0x1c4 0x4cc 0x7ac 0x0 0x1
-#define MX6SL_PAD_LCD_DAT13__KEY_ROW2              0x1c4 0x4cc 0x75c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT13__CSI_DATA04            0x1c4 0x4cc 0x640 0x2 0x1
-#define MX6SL_PAD_LCD_DAT13__EIM_DATA07            0x1c4 0x4cc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B           0x1c4 0x4cc 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B           0x1c4 0x4cc 0x818 0x4 0x3
-#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01            0x1c4 0x4cc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13           0x1c4 0x4cc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13        0x1c4 0x4cc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT14__LCD_DATA14            0x1c8 0x4d0 0x7b0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT14__KEY_COL3              0x1c8 0x4d0 0x740 0x1 0x1
-#define MX6SL_PAD_LCD_DAT14__CSI_DATA03            0x1c8 0x4d0 0x63c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT14__EIM_DATA08            0x1c8 0x4d0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA         0x1c8 0x4d0 0x81c 0x4 0x2
-#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA         0x1c8 0x4d0 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02            0x1c8 0x4d0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14           0x1c8 0x4d0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14        0x1c8 0x4d0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT15__LCD_DATA15            0x1cc 0x4d4 0x7b4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT15__KEY_ROW3              0x1cc 0x4d4 0x760 0x1 0x1
-#define MX6SL_PAD_LCD_DAT15__CSI_DATA02            0x1cc 0x4d4 0x638 0x2 0x1
-#define MX6SL_PAD_LCD_DAT15__EIM_DATA09            0x1cc 0x4d4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA         0x1cc 0x4d4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA         0x1cc 0x4d4 0x81c 0x4 0x3
-#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03            0x1cc 0x4d4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15           0x1cc 0x4d4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15        0x1cc 0x4d4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT16__LCD_DATA16            0x1d0 0x4d8 0x7b8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT16__KEY_COL4              0x1d0 0x4d8 0x744 0x1 0x1
-#define MX6SL_PAD_LCD_DAT16__CSI_DATA01            0x1d0 0x4d8 0x634 0x2 0x1
-#define MX6SL_PAD_LCD_DAT16__EIM_DATA10            0x1d0 0x4d8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT16__I2C2_SCL              0x1d0 0x4d8 0x724 0x4 0x3
-#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04            0x1d0 0x4d8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16           0x1d0 0x4d8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24        0x1d0 0x4d8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT17__LCD_DATA17            0x1d4 0x4dc 0x7bc 0x0 0x1
-#define MX6SL_PAD_LCD_DAT17__KEY_ROW4              0x1d4 0x4dc 0x764 0x1 0x1
-#define MX6SL_PAD_LCD_DAT17__CSI_DATA00            0x1d4 0x4dc 0x630 0x2 0x1
-#define MX6SL_PAD_LCD_DAT17__EIM_DATA11            0x1d4 0x4dc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT17__I2C2_SDA              0x1d4 0x4dc 0x728 0x4 0x3
-#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05            0x1d4 0x4dc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17           0x1d4 0x4dc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25        0x1d4 0x4dc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT18__LCD_DATA18            0x1d8 0x4e0 0x7c0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT18__KEY_COL5              0x1d8 0x4e0 0x748 0x1 0x1
-#define MX6SL_PAD_LCD_DAT18__CSI_DATA15            0x1d8 0x4e0 0x66c 0x2 0x0
-#define MX6SL_PAD_LCD_DAT18__EIM_DATA12            0x1d8 0x4e0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1          0x1d8 0x4e0 0x710 0x4 0x1
-#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06            0x1d8 0x4e0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18           0x1d8 0x4e0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26        0x1d8 0x4e0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT19__LCD_DATA19            0x1dc 0x4e4 0x7c4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT19__KEY_ROW5              0x1dc 0x4e4 0x768 0x1 0x1
-#define MX6SL_PAD_LCD_DAT19__CSI_DATA14            0x1dc 0x4e4 0x668 0x2 0x0
-#define MX6SL_PAD_LCD_DAT19__EIM_DATA13            0x1dc 0x4e4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2          0x1dc 0x4e4 0x714 0x4 0x1
-#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07            0x1dc 0x4e4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19           0x1dc 0x4e4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27        0x1dc 0x4e4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT2__LCD_DATA02             0x1e0 0x4e8 0x780 0x0 0x1
-#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0             0x1e0 0x4e8 0x68c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT              0x1e0 0x4e8 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT2__PWM3_OUT               0x1e0 0x4e8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT2__AUD4_RXC               0x1e0 0x4e8 0x5ec 0x4 0x1
-#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22             0x1e0 0x4e8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02            0x1e0 0x4e8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02         0x1e0 0x4e8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT20__LCD_DATA20            0x1e4 0x4ec 0x7c8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT20__KEY_COL6              0x1e4 0x4ec 0x74c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT20__CSI_DATA13            0x1e4 0x4ec 0x664 0x2 0x0
-#define MX6SL_PAD_LCD_DAT20__EIM_DATA14            0x1e4 0x4ec 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1          0x1e4 0x4ec 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08            0x1e4 0x4ec 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20           0x1e4 0x4ec 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28        0x1e4 0x4ec 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT21__LCD_DATA21            0x1e8 0x4f0 0x7cc 0x0 0x1
-#define MX6SL_PAD_LCD_DAT21__KEY_ROW6              0x1e8 0x4f0 0x76c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT21__CSI_DATA12            0x1e8 0x4f0 0x660 0x2 0x0
-#define MX6SL_PAD_LCD_DAT21__EIM_DATA15            0x1e8 0x4f0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2          0x1e8 0x4f0 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09            0x1e8 0x4f0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21           0x1e8 0x4f0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29        0x1e8 0x4f0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT22__LCD_DATA22            0x1ec 0x4f4 0x7d0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT22__KEY_COL7              0x1ec 0x4f4 0x750 0x1 0x1
-#define MX6SL_PAD_LCD_DAT22__CSI_DATA11            0x1ec 0x4f4 0x65c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B             0x1ec 0x4f4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3          0x1ec 0x4f4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10            0x1ec 0x4f4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22           0x1ec 0x4f4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30        0x1ec 0x4f4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT23__LCD_DATA23            0x1f0 0x4f8 0x7d4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT23__KEY_ROW7              0x1f0 0x4f8 0x770 0x1 0x1
-#define MX6SL_PAD_LCD_DAT23__CSI_DATA10            0x1f0 0x4f8 0x658 0x2 0x1
-#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B             0x1f0 0x4f8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN             0x1f0 0x4f8 0x718 0x4 0x1
-#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11            0x1f0 0x4f8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23           0x1f0 0x4f8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31        0x1f0 0x4f8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT3__LCD_DATA03             0x1f4 0x4fc 0x784 0x0 0x1
-#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK            0x1f4 0x4fc 0x67c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B            0x1f4 0x4fc 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT3__PWM4_OUT               0x1f4 0x4fc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT3__AUD4_RXD               0x1f4 0x4fc 0x5e4 0x4 0x1
-#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23             0x1f4 0x4fc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03            0x1f4 0x4fc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03         0x1f4 0x4fc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT4__LCD_DATA04             0x1f8 0x500 0x788 0x0 0x1
-#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1             0x1f8 0x500 0x690 0x1 0x1
-#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC              0x1f8 0x500 0x678 0x2 0x2
-#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB      0x1f8 0x500 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT4__AUD4_TXC               0x1f8 0x500 0x5f4 0x4 0x1
-#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24             0x1f8 0x500 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04            0x1f8 0x500 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04         0x1f8 0x500 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT5__LCD_DATA05             0x1fc 0x504 0x78c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2             0x1fc 0x504 0x694 0x1 0x1
-#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC              0x1fc 0x504 0x670 0x2 0x2
-#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B              0x1fc 0x504 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS              0x1fc 0x504 0x5f8 0x4 0x1
-#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25             0x1fc 0x504 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05            0x1fc 0x504 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05         0x1fc 0x504 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT6__LCD_DATA06             0x200 0x508 0x790 0x0 0x1
-#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3             0x200 0x508 0x698 0x1 0x1
-#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK             0x200 0x508 0x674 0x2 0x2
-#define MX6SL_PAD_LCD_DAT6__EIM_DATA00             0x200 0x508 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT6__AUD4_TXD               0x200 0x508 0x5e8 0x4 0x1
-#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26             0x200 0x508 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06            0x200 0x508 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06         0x200 0x508 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT7__LCD_DATA07             0x204 0x50c 0x794 0x0 0x1
-#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY             0x204 0x50c 0x680 0x1 0x1
-#define MX6SL_PAD_LCD_DAT7__CSI_MCLK               0x204 0x50c 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT7__EIM_DATA01             0x204 0x50c 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT          0x204 0x50c 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27             0x204 0x50c 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07            0x204 0x50c 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07         0x204 0x50c 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT8__LCD_DATA08             0x208 0x510 0x798 0x0 0x1
-#define MX6SL_PAD_LCD_DAT8__KEY_COL0               0x208 0x510 0x734 0x1 0x1
-#define MX6SL_PAD_LCD_DAT8__CSI_DATA09             0x208 0x510 0x654 0x2 0x1
-#define MX6SL_PAD_LCD_DAT8__EIM_DATA02             0x208 0x510 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK            0x208 0x510 0x69c 0x4 0x2
-#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28             0x208 0x510 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08            0x208 0x510 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08         0x208 0x510 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT9__LCD_DATA09             0x20c 0x514 0x79c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT9__KEY_ROW0               0x20c 0x514 0x754 0x1 0x1
-#define MX6SL_PAD_LCD_DAT9__CSI_DATA08             0x20c 0x514 0x650 0x2 0x1
-#define MX6SL_PAD_LCD_DAT9__EIM_DATA03             0x20c 0x514 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI            0x20c 0x514 0x6a4 0x4 0x2
-#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29             0x20c 0x514 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09            0x20c 0x514 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09         0x20c 0x514 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE           0x210 0x518 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5            0x210 0x518 0x870 0x1 0x2
-#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E             0x210 0x518 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B             0x210 0x518 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA        0x210 0x518 0x804 0x4 0x2
-#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA        0x210 0x518 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16           0x210 0x518 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC             0x214 0x51c 0x774 0x0 0x0
-#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6             0x214 0x51c 0x874 0x1 0x2
-#define MX6SL_PAD_LCD_HSYNC__LCD_CS                0x214 0x51c 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B             0x214 0x51c 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA         0x214 0x51c 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA         0x214 0x51c 0x804 0x4 0x3
-#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17            0x214 0x51c 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK         0x214 0x51c 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_RESET__LCD_RESET             0x218 0x520 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B           0x218 0x520 0x880 0x1 0x1
-#define MX6SL_PAD_LCD_RESET__LCD_BUSY              0x218 0x520 0x774 0x2 0x1
-#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B            0x218 0x520 0x884 0x3 0x1
-#define MX6SL_PAD_LCD_RESET__UART2_CTS_B           0x218 0x520 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_RESET__UART2_RTS_B           0x218 0x520 0x800 0x4 0x2
-#define MX6SL_PAD_LCD_RESET__GPIO2_IO19            0x218 0x520 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY        0x218 0x520 0x62c 0x6 0x1
-#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC             0x21c 0x524 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7             0x21c 0x524 0x878 0x1 0x2
-#define MX6SL_PAD_LCD_VSYNC__LCD_RS                0x21c 0x524 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B             0x21c 0x524 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B           0x21c 0x524 0x800 0x4 0x3
-#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B           0x21c 0x524 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18            0x21c 0x524 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL         0x21c 0x524 0x000 0x6 0x0
-#define MX6SL_PAD_PWM1__PWM1_OUT                   0x220 0x528 0x000 0x0 0x0
-#define MX6SL_PAD_PWM1__CCM_CLKO                   0x220 0x528 0x000 0x1 0x0
-#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT              0x220 0x528 0x000 0x2 0x0
-#define MX6SL_PAD_PWM1__FEC_REF_OUT                0x220 0x528 0x000 0x3 0x0
-#define MX6SL_PAD_PWM1__CSI_MCLK                   0x220 0x528 0x000 0x4 0x0
-#define MX6SL_PAD_PWM1__GPIO3_IO23                 0x220 0x528 0x000 0x5 0x0
-#define MX6SL_PAD_PWM1__EPIT1_OUT                  0x220 0x528 0x000 0x6 0x0
-#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0
-#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL            0x224 0x52c 0x72c 0x1 0x2
-#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT            0x224 0x52c 0x000 0x2 0x0
-#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID         0x224 0x52c 0x5e0 0x3 0x2
-#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY      0x224 0x52c 0x62c 0x4 0x2
-#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21          0x224 0x52c 0x000 0x5 0x0
-#define MX6SL_PAD_REF_CLK_24M__SD3_WP              0x224 0x52c 0x84c 0x6 0x3
-#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0
-#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA            0x228 0x530 0x730 0x1 0x2
-#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT            0x228 0x530 0x000 0x2 0x0
-#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID         0x228 0x530 0x5dc 0x3 0x3
-#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL            0x228 0x530 0x000 0x4 0x0
-#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22          0x228 0x530 0x000 0x5 0x0
-#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B            0x228 0x530 0x838 0x6 0x3
-#define MX6SL_PAD_SD1_CLK__SD1_CLK                 0x22c 0x534 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_CLK__FEC_MDIO                0x22c 0x534 0x6f4 0x1 0x2
-#define MX6SL_PAD_SD1_CLK__KEY_COL0                0x22c 0x534 0x734 0x2 0x2
-#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4              0x22c 0x534 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_CLK__GPIO5_IO15              0x22c 0x534 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_CMD__SD1_CMD                 0x230 0x538 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK              0x230 0x538 0x70c 0x1 0x2
-#define MX6SL_PAD_SD1_CMD__KEY_ROW0                0x230 0x538 0x754 0x2 0x2
-#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5              0x230 0x538 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_CMD__GPIO5_IO14              0x230 0x538 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT0__SD1_DATA0              0x234 0x53c 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER              0x234 0x53c 0x708 0x1 0x2
-#define MX6SL_PAD_SD1_DAT0__KEY_COL1               0x234 0x53c 0x738 0x2 0x2
-#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6             0x234 0x53c 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11             0x234 0x53c 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT1__SD1_DATA1              0x238 0x540 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV              0x238 0x540 0x704 0x1 0x2
-#define MX6SL_PAD_SD1_DAT1__KEY_ROW1               0x238 0x540 0x758 0x2 0x2
-#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7             0x238 0x540 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08             0x238 0x540 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT2__SD1_DATA2              0x23c 0x544 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1           0x23c 0x544 0x6fc 0x1 0x2
-#define MX6SL_PAD_SD1_DAT2__KEY_COL2               0x23c 0x544 0x73c 0x2 0x2
-#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8             0x23c 0x544 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13             0x23c 0x544 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT3__SD1_DATA3              0x240 0x548 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0           0x240 0x548 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT3__KEY_ROW2               0x240 0x548 0x75c 0x2 0x2
-#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9             0x240 0x548 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06             0x240 0x548 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT4__SD1_DATA4              0x244 0x54c 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT4__FEC_MDC                0x244 0x54c 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT4__KEY_COL3               0x244 0x54c 0x740 0x2 0x2
-#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N           0x244 0x54c 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA          0x244 0x54c 0x814 0x4 0x4
-#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA          0x244 0x54c 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12             0x244 0x54c 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT5__SD1_DATA5              0x248 0x550 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0           0x248 0x550 0x6f8 0x1 0x2
-#define MX6SL_PAD_SD1_DAT5__KEY_ROW3               0x248 0x550 0x760 0x2 0x2
-#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED             0x248 0x550 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA          0x248 0x550 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA          0x248 0x550 0x814 0x4 0x5
-#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09             0x248 0x550 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT6__SD1_DATA6              0x24c 0x554 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN              0x24c 0x554 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT6__KEY_COL4               0x24c 0x554 0x744 0x2 0x2
-#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ             0x24c 0x554 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B            0x24c 0x554 0x810 0x4 0x4
-#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B            0x24c 0x554 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07             0x24c 0x554 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT7__SD1_DATA7              0x250 0x558 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1           0x250 0x558 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT7__KEY_ROW4               0x250 0x558 0x764 0x2 0x2
-#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY         0x250 0x558 0x62c 0x3 0x3
-#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B            0x250 0x558 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B            0x250 0x558 0x810 0x4 0x5
-#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10             0x250 0x558 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_CLK__SD2_CLK                 0x254 0x55c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_CLK__AUD4_RXFS               0x254 0x55c 0x5f0 0x1 0x2
-#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK             0x254 0x55c 0x6b0 0x2 0x2
-#define MX6SL_PAD_SD2_CLK__CSI_DATA00              0x254 0x55c 0x630 0x3 0x2
-#define MX6SL_PAD_SD2_CLK__GPIO5_IO05              0x254 0x55c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_CMD__SD2_CMD                 0x258 0x560 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_CMD__AUD4_RXC                0x258 0x560 0x5ec 0x1 0x2
-#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0              0x258 0x560 0x6c0 0x2 0x2
-#define MX6SL_PAD_SD2_CMD__CSI_DATA01              0x258 0x560 0x634 0x3 0x2
-#define MX6SL_PAD_SD2_CMD__EPIT1_OUT               0x258 0x560 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_CMD__GPIO5_IO04              0x258 0x560 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT0__SD2_DATA0              0x25c 0x564 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT0__AUD4_RXD               0x25c 0x564 0x5e4 0x1 0x2
-#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI            0x25c 0x564 0x6bc 0x2 0x2
-#define MX6SL_PAD_SD2_DAT0__CSI_DATA02             0x25c 0x564 0x638 0x3 0x2
-#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B            0x25c 0x564 0x818 0x4 0x4
-#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B            0x25c 0x564 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01             0x25c 0x564 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT1__SD2_DATA1              0x260 0x568 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT1__AUD4_TXC               0x260 0x568 0x5f4 0x1 0x2
-#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO            0x260 0x568 0x6b8 0x2 0x2
-#define MX6SL_PAD_SD2_DAT1__CSI_DATA03             0x260 0x568 0x63c 0x3 0x2
-#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B            0x260 0x568 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B            0x260 0x568 0x818 0x4 0x5
-#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30             0x260 0x568 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT2__SD2_DATA2              0x264 0x56c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS              0x264 0x56c 0x5f8 0x1 0x2
-#define MX6SL_PAD_SD2_DAT2__FEC_COL                0x264 0x56c 0x6f0 0x2 0x1
-#define MX6SL_PAD_SD2_DAT2__CSI_DATA04             0x264 0x56c 0x640 0x3 0x2
-#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA          0x264 0x56c 0x81c 0x4 0x4
-#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA          0x264 0x56c 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03             0x264 0x56c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT3__SD2_DATA3              0x268 0x570 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT3__AUD4_TXD               0x268 0x570 0x5e8 0x1 0x2
-#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK             0x268 0x570 0x700 0x2 0x1
-#define MX6SL_PAD_SD2_DAT3__CSI_DATA05             0x268 0x570 0x644 0x3 0x2
-#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA          0x268 0x570 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA          0x268 0x570 0x81c 0x4 0x5
-#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28             0x268 0x570 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT4__SD2_DATA4              0x26c 0x574 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT4__SD3_DATA4              0x26c 0x574 0x83c 0x1 0x1
-#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA          0x26c 0x574 0x804 0x2 0x4
-#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA          0x26c 0x574 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT4__CSI_DATA06             0x26c 0x574 0x648 0x3 0x2
-#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT              0x26c 0x574 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02             0x26c 0x574 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT5__SD2_DATA5              0x270 0x578 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT5__SD3_DATA5              0x270 0x578 0x840 0x1 0x1
-#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA          0x270 0x578 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA          0x270 0x578 0x804 0x2 0x5
-#define MX6SL_PAD_SD2_DAT5__CSI_DATA07             0x270 0x578 0x64c 0x3 0x2
-#define MX6SL_PAD_SD2_DAT5__SPDIF_IN               0x270 0x578 0x7f0 0x4 0x2
-#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31             0x270 0x578 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT6__SD2_DATA6              0x274 0x57c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT6__SD3_DATA6              0x274 0x57c 0x844 0x1 0x1
-#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B            0x274 0x57c 0x800 0x2 0x4
-#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B            0x274 0x57c 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT6__CSI_DATA08             0x274 0x57c 0x650 0x3 0x2
-#define MX6SL_PAD_SD2_DAT6__SD2_WP                 0x274 0x57c 0x834 0x4 0x2
-#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29             0x274 0x57c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT7__SD2_DATA7              0x278 0x580 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT7__SD3_DATA7              0x278 0x580 0x848 0x1 0x1
-#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B            0x278 0x580 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B            0x278 0x580 0x800 0x2 0x5
-#define MX6SL_PAD_SD2_DAT7__CSI_DATA09             0x278 0x580 0x654 0x3 0x2
-#define MX6SL_PAD_SD2_DAT7__SD2_CD_B               0x278 0x580 0x830 0x4 0x2
-#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00             0x278 0x580 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_RST__SD2_RESET               0x27c 0x584 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_RST__FEC_REF_OUT             0x27c 0x584 0x000 0x1 0x0
-#define MX6SL_PAD_SD2_RST__WDOG2_B                 0x27c 0x584 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_RST__SPDIF_OUT               0x27c 0x584 0x000 0x3 0x0
-#define MX6SL_PAD_SD2_RST__CSI_MCLK                0x27c 0x584 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_RST__GPIO4_IO27              0x27c 0x584 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CLK__SD3_CLK                 0x280 0x588 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_CLK__AUD5_RXFS               0x280 0x588 0x608 0x1 0x1
-#define MX6SL_PAD_SD3_CLK__KEY_COL5                0x280 0x588 0x748 0x2 0x2
-#define MX6SL_PAD_SD3_CLK__CSI_DATA10              0x280 0x588 0x658 0x3 0x2
-#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB       0x280 0x588 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_CLK__GPIO5_IO18              0x280 0x588 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR            0x280 0x588 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_CMD__SD3_CMD                 0x284 0x58c 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_CMD__AUD5_RXC                0x284 0x58c 0x604 0x1 0x1
-#define MX6SL_PAD_SD3_CMD__KEY_ROW5                0x284 0x58c 0x768 0x2 0x2
-#define MX6SL_PAD_SD3_CMD__CSI_DATA11              0x284 0x58c 0x65c 0x3 0x2
-#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID             0x284 0x58c 0x5e0 0x4 0x3
-#define MX6SL_PAD_SD3_CMD__GPIO5_IO21              0x284 0x58c 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR            0x284 0x58c 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_DAT0__SD3_DATA0              0x288 0x590 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT0__AUD5_RXD               0x288 0x590 0x5fc 0x1 0x1
-#define MX6SL_PAD_SD3_DAT0__KEY_COL6               0x288 0x590 0x74c 0x2 0x2
-#define MX6SL_PAD_SD3_DAT0__CSI_DATA12             0x288 0x590 0x660 0x3 0x1
-#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID            0x288 0x590 0x5dc 0x4 0x4
-#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19             0x288 0x590 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT1__SD3_DATA1              0x28c 0x594 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT1__AUD5_TXC               0x28c 0x594 0x60c 0x1 0x1
-#define MX6SL_PAD_SD3_DAT1__KEY_ROW6               0x28c 0x594 0x76c 0x2 0x2
-#define MX6SL_PAD_SD3_DAT1__CSI_DATA13             0x28c 0x594 0x664 0x3 0x1
-#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT            0x28c 0x594 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20             0x28c 0x594 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B              0x28c 0x594 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_DAT2__SD3_DATA2              0x290 0x598 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS              0x290 0x598 0x610 0x1 0x1
-#define MX6SL_PAD_SD3_DAT2__KEY_COL7               0x290 0x598 0x750 0x2 0x2
-#define MX6SL_PAD_SD3_DAT2__CSI_DATA14             0x290 0x598 0x668 0x3 0x1
-#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT              0x290 0x598 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16             0x290 0x598 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC            0x290 0x598 0x820 0x6 0x3
-#define MX6SL_PAD_SD3_DAT3__SD3_DATA3              0x294 0x59c 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT3__AUD5_TXD               0x294 0x59c 0x600 0x1 0x1
-#define MX6SL_PAD_SD3_DAT3__KEY_ROW7               0x294 0x59c 0x770 0x2 0x2
-#define MX6SL_PAD_SD3_DAT3__CSI_DATA15             0x294 0x59c 0x66c 0x3 0x1
-#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT              0x294 0x59c 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17             0x294 0x59c 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC            0x294 0x59c 0x824 0x6 0x2
-#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA         0x298 0x5a0 0x7fc 0x0 0x0
-#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA         0x298 0x5a0 0x000 0x0 0x0
-#define MX6SL_PAD_UART1_RXD__PWM1_OUT              0x298 0x5a0 0x000 0x1 0x0
-#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA         0x298 0x5a0 0x814 0x2 0x6
-#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA         0x298 0x5a0 0x000 0x2 0x0
-#define MX6SL_PAD_UART1_RXD__FEC_COL               0x298 0x5a0 0x6f0 0x3 0x2
-#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA         0x298 0x5a0 0x81c 0x4 0x6
-#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA         0x298 0x5a0 0x000 0x4 0x0
-#define MX6SL_PAD_UART1_RXD__GPIO3_IO16            0x298 0x5a0 0x000 0x5 0x0
-#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA         0x29c 0x5a4 0x000 0x0 0x0
-#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA         0x29c 0x5a4 0x7fc 0x0 0x1
-#define MX6SL_PAD_UART1_TXD__PWM2_OUT              0x29c 0x5a4 0x000 0x1 0x0
-#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA         0x29c 0x5a4 0x000 0x2 0x0
-#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA         0x29c 0x5a4 0x814 0x2 0x7
-#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK            0x29c 0x5a4 0x700 0x3 0x2
-#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA         0x29c 0x5a4 0x000 0x4 0x0
-#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA         0x29c 0x5a4 0x81c 0x4 0x7
-#define MX6SL_PAD_UART1_TXD__GPIO3_IO17            0x29c 0x5a4 0x000 0x5 0x0
-#define MX6SL_PAD_UART1_TXD__UART5_DCD_B           0x29c 0x5a4 0x000 0x7 0x0
-#define MX6SL_PAD_WDOG_B__WDOG1_B                  0x2a0 0x5a8 0x000 0x0 0x0
-#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB        0x2a0 0x5a8 0x000 0x1 0x0
-#define MX6SL_PAD_WDOG_B__UART5_RI_B               0x2a0 0x5a8 0x000 0x2 0x0
-#define MX6SL_PAD_WDOG_B__GPIO3_IO18               0x2a0 0x5a8 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6SL_PINFUNC_H */
diff --git a/src/arm/imx6sx-pinfunc.h b/src/arm/imx6sx-pinfunc.h
deleted file mode 100644
index bb9c6b78cb97..000000000000
--- a/src/arm/imx6sx-pinfunc.h
+++ /dev/null
@@ -1,1544 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6SX_PINFUNC_H
-#define __DTS_IMX6SX_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_RX                            0x0024 0x036C 0x0830 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_TX                            0x0024 0x036C 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO05__UART1_RX                            0x0028 0x0370 0x0830 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO05__UART1_TX                            0x0028 0x0370 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_RX                            0x002C 0x0374 0x0838 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_TX                            0x002C 0x0374 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B                         0x002C 0x0374 0x082C 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART2_RX                            0x0030 0x0378 0x0838 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO07__UART2_TX                            0x0030 0x0378 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
-#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B                         0x0034 0x037C 0x0834 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
-#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
-#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
-#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
-#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
-#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
-#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
-#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
-#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
-#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
-#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
-#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
-#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
-#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
-#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
-#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
-#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
-#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
-#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
-#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_RX                            0x005C 0x03A4 0x0858 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_TX                            0x005C 0x03A4 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
-#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
-#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
-#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA05__UART6_RX                            0x0060 0x03A8 0x0858 0x4 0x1
-#define MX6SX_PAD_CSI_DATA05__UART6_TX                            0x0060 0x03A8 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
-#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
-#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
-#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
-#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B                         0x0064 0x03AC 0x0854 0x4 0x0
-#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
-#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
-#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
-#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
-#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
-#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B                          0x006C 0x03B4 0x0844 0x3 0x2
-#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
-#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
-#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_MCLK__UART4_RX                              0x0070 0x03B8 0x0848 0x3 0x2
-#define MX6SX_PAD_CSI_MCLK__UART4_TX                              0x0070 0x03B8 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
-#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
-#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_PIXCLK__UART4_RX                            0x0074 0x03BC 0x0848 0x3 0x3
-#define MX6SX_PAD_CSI_PIXCLK__UART4_TX                            0x0074 0x03BC 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
-#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
-#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
-#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
-#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
-#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
-#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
-#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
-#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
-#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
-#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
-#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
-#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
-#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
-#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
-#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
-#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
-#define MX6SX_PAD_ENET2_COL__UART1_RX                             0x0094 0x03DC 0x0830 0x3 0x2
-#define MX6SX_PAD_ENET2_COL__UART1_TX                             0x0094 0x03DC 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
-#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
-#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
-#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
-#define MX6SX_PAD_ENET2_CRS__UART1_RX                             0x0098 0x03E0 0x0830 0x3 0x3
-#define MX6SX_PAD_ENET2_CRS__UART1_TX                             0x0098 0x03E0 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
-#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
-#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B                       0x009C 0x03E4 0x082C 0x3 0x2
-#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
-#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL0__UART6_RTS_B                           0x00A4 0x03EC 0x0854 0x2 0x2
-#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
-#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
-#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
-#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
-#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL1__UART6_RX                              0x00A8 0x03F0 0x0858 0x2 0x2
-#define MX6SX_PAD_KEY_COL1__UART6_TX                              0x00A8 0x03F0 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
-#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
-#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
-#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
-#define MX6SX_PAD_KEY_COL2__UART5_RTS_B                           0x00AC 0x03F4 0x084C 0x2 0x2
-#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
-#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL3__UART5_RX                              0x00B0 0x03F8 0x0850 0x2 0x2
-#define MX6SX_PAD_KEY_COL3__UART5_TX                              0x00B0 0x03F8 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
-#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
-#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
-#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
-#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
-#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
-#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
-#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW1__UART6_RX                              0x00BC 0x0404 0x0858 0x2 0x3
-#define MX6SX_PAD_KEY_ROW1__UART6_TX                              0x00BC 0x0404 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
-#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
-#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
-#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
-#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
-#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW3__UART5_RX                              0x00C4 0x040C 0x0850 0x2 0x3
-#define MX6SX_PAD_KEY_ROW3__UART5_TX                              0x00C4 0x040C 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
-#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
-#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
-#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
-#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
-#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
-#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
-#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
-#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
-#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
-#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
-#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
-#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
-#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
-#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
-#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
-#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
-#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
-#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
-#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
-#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
-#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
-#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
-#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
-#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
-#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
-#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
-#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
-#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
-#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
-#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
-#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
-#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
-#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
-#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
-#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
-#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
-#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
-#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
-#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
-#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
-#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B                        0x0160 0x04A8 0x083C 0x3 0x0
-#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
-#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
-#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_RX                           0x0168 0x04B0 0x0840 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_TX                           0x0168 0x04B0 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
-#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA07__UART3_RX                           0x016C 0x04B4 0x0840 0x3 0x1
-#define MX6SX_PAD_NAND_DATA07__UART3_TX                           0x016C 0x04B4 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
-#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
-#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
-#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
-#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
-#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
-#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
-#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
-#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
-#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
-#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
-#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
-#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
-#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
-#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
-#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
-#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
-#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
-#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
-#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
-#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
-#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B                       0x01A4 0x04EC 0x083C 0x1 0x5
-#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
-#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
-#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
-#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
-#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX                           0x01B4 0x04FC 0x0840 0x1 0x4
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX                           0x01B4 0x04FC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
-#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
-#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX                          0x01B8 0x0500 0x0840 0x1 0x5
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX                          0x01B8 0x0500 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
-#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
-#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
-#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
-#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
-#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
-#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
-#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
-#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
-#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
-#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
-#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
-#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA0__UART2_RX                             0x0228 0x0570 0x0838 0x4 0x2
-#define MX6SX_PAD_SD1_DATA0__UART2_TX                             0x0228 0x0570 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
-#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA1__UART2_RX                             0x022C 0x0574 0x0838 0x4 0x3
-#define MX6SX_PAD_SD1_DATA1__UART2_TX                             0x022C 0x0574 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
-#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
-#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
-#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B                          0x0234 0x057C 0x0834 0x4 0x3
-#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
-#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
-#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
-#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
-#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
-#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
-#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
-#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
-#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
-#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
-#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
-#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
-#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
-#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA0__UART4_RX                             0x0240 0x0588 0x0848 0x7 0x4
-#define MX6SX_PAD_SD2_DATA0__UART4_TX                             0x0240 0x0588 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
-#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
-#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
-#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA1__UART4_RX                             0x0244 0x058C 0x0848 0x7 0x5
-#define MX6SX_PAD_SD2_DATA1__UART4_TX                             0x0244 0x058C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
-#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
-#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
-#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
-#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA2__UART6_RX                             0x0248 0x0590 0x0858 0x7 0x4
-#define MX6SX_PAD_SD2_DATA2__UART6_TX                             0x0248 0x0590 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
-#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
-#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
-#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
-#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
-#define MX6SX_PAD_SD2_DATA3__UART6_RX                             0x024C 0x0594 0x0858 0x7 0x5
-#define MX6SX_PAD_SD2_DATA3__UART6_TX                             0x024C 0x0594 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
-#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
-#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
-#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_RX                               0x0254 0x059C 0x0848 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_TX                               0x0254 0x059C 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
-#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
-#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
-#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
-#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
-#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
-#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
-#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B                          0x0260 0x05A8 0x0844 0x1 0x1
-#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
-#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
-#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA3__UART4_RX                             0x0264 0x05AC 0x0848 0x1 0x1
-#define MX6SX_PAD_SD3_DATA3__UART4_TX                             0x0264 0x05AC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
-#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
-#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
-#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
-#define MX6SX_PAD_SD3_DATA4__UART3_RX                             0x0268 0x05B0 0x0840 0x3 0x2
-#define MX6SX_PAD_SD3_DATA4__UART3_TX                             0x0268 0x05B0 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA5__UART3_RX                             0x026C 0x05B4 0x0840 0x3 0x3
-#define MX6SX_PAD_SD3_DATA5__UART3_TX                             0x026C 0x05B4 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B                          0x0270 0x05B8 0x083C 0x3 0x2
-#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
-#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
-#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
-#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
-#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
-#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
-#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
-#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
-#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
-#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
-#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
-#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_RX                             0x0290 0x05D8 0x0850 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_TX                             0x0290 0x05D8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
-#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA5__UART5_RX                             0x0294 0x05DC 0x0850 0x2 0x1
-#define MX6SX_PAD_SD4_DATA5__UART5_TX                             0x0294 0x05DC 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
-#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
-#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B                          0x0298 0x05E0 0x084C 0x2 0x0
-#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
-#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
-#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
-#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
-#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
-#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
-#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
-#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
-#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
-#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
-#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
-#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
-#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
-#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
-#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
-#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
-#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
-
-#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/src/arm/integrator.dtsi b/src/arm/integrator.dtsi
deleted file mode 100644
index 88e3d477bf16..000000000000
--- a/src/arm/integrator.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * SoC core Device Tree for the ARM Integrator platforms
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	core-module@10000000 {
-		compatible = "arm,core-module-integrator";
-		reg = <0x10000000 0x200>;
-	};
-
-	ebi@12000000 {
-		compatible = "arm,external-bus-interface";
-		reg = <0x12000000 0x100>;
-	};
-
-	timer@13000000 {
-		reg = <0x13000000 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <5>;
-	};
-
-	timer@13000100 {
-		reg = <0x13000100 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <6>;
-	};
-
-	timer@13000200 {
-		reg = <0x13000200 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <7>;
-	};
-
-	pic@14000000 {
-		compatible = "arm,versatile-fpga-irq";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0x14000000 0x100>;
-		clear-mask = <0xffffffff>;
-	};
-
-	flash@24000000 {
-		compatible = "cfi-flash";
-		reg = <0x24000000 0x02000000>;
-	};
-
-	fpga {
-		compatible = "arm,amba-bus", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&pic>;
-
-		/*
-		 * These PrimeCells are in the same locations and using the
-		 * same interrupts in all Integrators, however the silicon
-		 * version deployed is different.
-		 */
-		rtc@15000000 {
-			reg = <0x15000000 0x1000>;
-			interrupts = <8>;
-		};
-
-		uart@16000000 {
-			reg = <0x16000000 0x1000>;
-			interrupts = <1>;
-		};
-
-		uart@17000000 {
-			reg = <0x17000000 0x1000>;
-			interrupts = <2>;
-		};
-
-		kmi@18000000 {
-			reg = <0x18000000 0x1000>;
-			interrupts = <3>;
-		};
-
-		kmi@19000000 {
-			reg = <0x19000000 0x1000>;
-			interrupts = <4>;
-		};
-	};
-};
diff --git a/src/arm/integratorap.dts b/src/arm/integratorap.dts
deleted file mode 100644
index cf06e32ee108..000000000000
--- a/src/arm/integratorap.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Device Tree for the ARM Integrator/AP platform
- */
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/AP";
-	compatible = "arm,integrator-ap";
-	dma-ranges = <0x80000000 0x0 0x80000000>;
-
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
-	};
-
-	/* 24 MHz chrystal on the core module */
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <14745600>;
-	};
-
-	syscon {
-		compatible = "arm,integrator-ap-syscon";
-		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logical module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
-	};
-
-	timer0: timer@13000000 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer1: timer@13000100 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer2: timer@13000200 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	pic: pic@14000000 {
-		valid-mask = <0x003fffff>;
-	};
-
-	pci: pciv3@62000000 {
-		compatible = "v3,v360epc-pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x62000000 0x10000>;
-		interrupt-parent = <&pic>;
-		interrupts = <17>; /* Bus error IRQ */
-		ranges = <0x00000000 0 0x61000000 /* config space */
-			0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
-			0x01000000 0 0x0 /* I/O space */
-			0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
-			0x02000000 0 0x00000000 /* non-prefectable memory */
-			0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
-			0x42000000 0 0x10000000 /* prefetchable memory */
-			0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
-		interrupt-map-mask = <0xf800 0 0 0x7>;
-		interrupt-map = <
-		/* IDSEL 9 */
-		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
-		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
-		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
-		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
-		/* IDSEL 10 */
-		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
-		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
-		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
-		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
-		/* IDSEL 11 */
-		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
-		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
-		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
-		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
-		/* IDSEL 12 */
-		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
-		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
-		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
-		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
-		>;
-	};
-
-	fpga {
-		/*
-		 * The Integator/AP predates the idea to have magic numbers
-		 * identifying the PrimeCell in hardware, thus we have to
-		 * supply these from the device tree.
-		 */
-		rtc: rtc@15000000 {
-			compatible = "arm,pl030", "arm,primecell";
-			arm,primecell-periphid = <0x00041030>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart0: uart@16000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart1: uart@17000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		kmi0: kmi@18000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@19000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-	};
-};
diff --git a/src/arm/integratorcp.dts b/src/arm/integratorcp.dts
deleted file mode 100644
index d43f15b4f79a..000000000000
--- a/src/arm/integratorcp.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * Device Tree for the ARM Integrator/CP platform
- */
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/CP";
-	compatible = "arm,integrator-cp";
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
-	};
-
-	/*
-	 * The Integrator/CP overall clocking architecture can be found in
-	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
-	 * appear to illustrate the layout used in most configurations.
-	 */
-
-	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&xtal_codec>;
-	};
-
-	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <14745600>;
-	};
-
-	/* Actually sysclk I think */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	core-module@10000000 {
-		/* 24 MHz chrystal on the core module */
-		xtal24mhz: xtal24mhz@24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		/*
-		 * External oscillator on the core module, usually used
-		 * to drive video circuitry. Driven from the 24MHz clock.
-		 */
-		auxosc: cm_aux_osc@25M {
-			#clock-cells = <0>;
-			compatible = "arm,integrator-cm-auxosc";
-			clocks = <&xtal24mhz>;
-		};
-
-		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
-		kmiclk: kmiclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <3>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-
-		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <24>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-	};
-
-	syscon {
-		compatible = "arm,integrator-cp-syscon";
-		reg = <0xcb000000 0x100>;
-	};
-
-	timer0: timer@13000000 {
-		/* TIMER0 runs directly on the 25MHz chrystal */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&xtal25mhz>;
-	};
-
-	timer1: timer@13000100 {
-		/* TIMER1 runs @ 1MHz */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&timclk>;
-	};
-
-	timer2: timer@13000200 {
-		/* TIMER2 runs @ 1MHz */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&timclk>;
-	};
-
-	pic: pic@14000000 {
-		valid-mask = <0x1fc003ff>;
-	};
-
-	cic: cic@10000040 {
-		compatible = "arm,versatile-fpga-irq";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0x10000040 0x100>;
-		clear-mask = <0xffffffff>;
-		valid-mask = <0x00000007>;
-	};
-
-	/* The SIC is cascaded off IRQ 26 on the PIC */
-	sic: sic@ca000000 {
-		compatible = "arm,versatile-fpga-irq";
-		interrupt-parent = <&pic>;
-		interrupts = <26>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0xca000000 0x100>;
-		clear-mask = <0x00000fff>;
-		valid-mask = <0x00000fff>;
-	};
-
-	ethernet@c8000000 {
-		compatible = "smsc,lan91c111";
-		reg = <0xc8000000 0x10>;
-		interrupt-parent = <&pic>;
-		interrupts = <27>;
-	};
-
-	fpga {
-		/*
-		 * These PrimeCells are at the same location and using
-		 * the same interrupts in all Integrators, but in the CP
-		 * slightly newer versions are deployed.
-		 */
-		rtc@15000000 {
-			compatible = "arm,pl031", "arm,primecell";
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart@16000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart@17000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		kmi@18000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi@19000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		/*
-		 * These PrimeCells are only available on the Integrator/CP
-		 */
-		mmc@1c000000 {
-			compatible = "arm,pl180", "arm,primecell";
-			reg = <0x1c000000 0x1000>;
-			interrupts = <23 24>;
-			max-frequency = <515633>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-		};
-
-		aaci@1d000000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x1d000000 0x1000>;
-			interrupts = <25>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		clcd@c0000000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
-			interrupts = <22>;
-			clocks = <&auxosc>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
-		};
-	};
-};
diff --git a/src/arm/k2e-clocks.dtsi b/src/arm/k2e-clocks.dtsi
deleted file mode 100644
index 598afe91c676..000000000000
--- a/src/arm/k2e-clocks.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Edison SoC specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	clkusb1: clkusb1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "usb";
-		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkhyperlink0: clkhyperlink0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
-	clkpcie1: clkpcie1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x0235006c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkxge: clkxge {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-};
diff --git a/src/arm/k2e-evm.dts b/src/arm/k2e-evm.dts
deleted file mode 100644
index c568f067604d..000000000000
--- a/src/arm/k2e-evm.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Edison EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "k2e.dtsi"
-
-/ {
-	compatible =  "ti,k2e-evm","ti,keystone";
-	model = "Texas Instruments Keystone 2 Edison EVM";
-
-	soc {
-
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-sys";
-			};
-
-			refclkpass: refclkpass {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-pass";
-			};
-
-			refclkddr3a: refclkddr3a {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3a";
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x1FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
diff --git a/src/arm/k2e.dtsi b/src/arm/k2e.dtsi
deleted file mode 100644
index 03d01909525b..000000000000
--- a/src/arm/k2e.dtsi
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Edison soc device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	soc {
-		/include/ "k2e-clocks.dtsi"
-
-		usb: usb@2680000 {
-			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
-			dwc3@2690000 {
-				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		usb1_phy: usb_phy@2620750 {
-			compatible = "ti,keystone-usbphy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2620750 24>;
-			status = "disabled";
-		};
-
-		usb1: usb@25000000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x25000000 0x10000>;
-			clocks = <&clkusb1>;
-			clock-names = "usb";
-			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			status = "disabled";
-
-			dwc3@25010000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x25010000 0x70000>;
-				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
-				usb-phy = <&usb1_phy>, <&usb1_phy>;
-			};
-		};
-	};
-};
diff --git a/src/arm/k2hk-clocks.dtsi b/src/arm/k2hk-clocks.dtsi
deleted file mode 100644
index d5adee3c0067..000000000000
--- a/src/arm/k2hk-clocks.dtsi
+++ /dev/null
@@ -1,426 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking SoC clock nodes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	armpllclk: armpllclk@2620370 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkarm>;
-		clock-output-names = "arm-pll-clk";
-		reg = <0x02620370 4>;
-		reg-names = "control";
-	};
-
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	ddr3bpllclk: ddr3bpllclk@2620368 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3b>;
-		clock-output-names = "ddr-3b-pll-clk";
-		reg = <0x02620368 4>;
-		reg-names = "control";
-	};
-
-	clktsip: clktsip {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "tsip";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clksrio: clksrio {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1rstiso13>;
-		clock-output-names = "srio";
-		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <4>;
-	};
-
-	clkhyperlink0: clkhyperlink0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
-	clkgem1: clkgem1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem1";
-		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <9>;
-	};
-
-	clkgem2: clkgem2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem2";
-		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <10>;
-	};
-
-	clkgem3: clkgem3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem3";
-		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <11>;
-	};
-
-	clkgem4: clkgem4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem4";
-		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <12>;
-	};
-
-	clkgem5: clkgem5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem5";
-		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <13>;
-	};
-
-	clkgem6: clkgem6 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem6";
-		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <14>;
-	};
-
-	clkgem7: clkgem7 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem7";
-		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <15>;
-	};
-
-	clkddr31: clkddr31 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "ddr3-1";
-		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <16>;
-	};
-
-	clktac: clktac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tac";
-		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac01: clkrac01 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-01";
-		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac23: clkrac23 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-23";
-		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkfftc0: clkfftc0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-0";
-		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc1: clkfftc1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-1";
-		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc2: clkfftc2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-2";
-		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc3: clkfftc3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-3";
-		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc4: clkfftc4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-4";
-		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc5: clkfftc5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-5";
-		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkaif: clkaif {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "aif";
-		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <21>;
-	};
-
-	clktcp3d0: clktcp3d0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-0";
-		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d1: clktcp3d1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-1";
-		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d2: clktcp3d2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-2";
-		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clktcp3d3: clktcp3d3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-3";
-		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clkvcp0: clkvcp0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-0";
-		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp1: clkvcp1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-1";
-		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp2: clkvcp2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-2";
-		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp3: clkvcp3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-3";
-		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp4: clkvcp4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-4";
-		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp5: clkvcp5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-5";
-		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp6: clkvcp6 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-6";
-		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp7: clkvcp7 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-7";
-		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkbcp: clkbcp {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "bcp";
-		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <26>;
-	};
-
-	clkdxb: clkdxb {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dxb";
-		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <27>;
-	};
-
-	clkhyperlink1: clkhyperlink1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-1";
-		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <28>;
-	};
-
-	clkxge: clkxge {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-};
diff --git a/src/arm/k2hk-evm.dts b/src/arm/k2hk-evm.dts
deleted file mode 100644
index 3223cc152a85..000000000000
--- a/src/arm/k2hk-evm.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "k2hk.dtsi"
-
-/ {
-	compatible =  "ti,k2hk-evm","ti,keystone";
-	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
-
-	soc {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-
-			refclkpass: refclkpass {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-pass";
-			};
-
-			refclkarm: refclkarm {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <125000000>;
-				clock-output-names = "refclk-arm";
-			};
-
-			refclkddr3a: refclkddr3a {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3a";
-			};
-
-			refclkddr3b: refclkddr3b {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3b";
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		debug1_1 {
-			label = "keystone:green:debug1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
-		};
-
-		debug1_2 {
-			label = "keystone:red:debug1";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
-		};
-
-		debug2 {
-			label = "keystone:blue:debug2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
-		};
-
-		debug3 {
-			label = "keystone:blue:debug3";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x1fe80000>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
diff --git a/src/arm/k2hk.dtsi b/src/arm/k2hk.dtsi
deleted file mode 100644
index c73899c73118..000000000000
--- a/src/arm/k2hk.dtsi
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking soc specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	soc {
-		/include/ "k2hk-clocks.dtsi"
-	};
-};
diff --git a/src/arm/k2l-clocks.dtsi b/src/arm/k2l-clocks.dtsi
deleted file mode 100644
index eb1e3e29f073..000000000000
--- a/src/arm/k2l-clocks.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 lamarr SoC clock nodes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	armpllclk: armpllclk@2620370 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "arm-pll-clk";
-		reg = <0x02620370 4>;
-		reg-names = "control";
-	};
-
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	clkdfeiqnsys: clkdfeiqnsys {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "dfe";
-		reg-names = "control", "domain";
-		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
-		domain-id = <0>;
-	};
-
-	clkpcie1: clkpcie1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <4>;
-	};
-
-	clkgem1: clkgem1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem1";
-		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <9>;
-	};
-
-	clkgem2: clkgem2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem2";
-		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <10>;
-	};
-
-	clkgem3: clkgem3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem3";
-		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <11>;
-	};
-
-	clktac: clktac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tac";
-		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac: clkrac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac";
-		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkdfepd0: clkdfepd0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dfe-pd0";
-		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkfftc0: clkfftc0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-0";
-		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkosr: clkosr {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "osr";
-		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <21>;
-	};
-
-	clktcp3d0: clktcp3d0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-0";
-		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d1: clktcp3d1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-1";
-		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clkvcp0: clkvcp0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-0";
-		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp1: clkvcp1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-1";
-		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp2: clkvcp2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-2";
-		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp3: clkvcp3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-3";
-		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkbcp: clkbcp {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "bcp";
-		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <26>;
-	};
-
-	clkdfepd1: clkdfepd1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dfe-pd1";
-		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <27>;
-	};
-
-	clkfftc1: clkfftc1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-1";
-		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <28>;
-	};
-
-	clkiqnail: clkiqnail {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "iqn-ail";
-		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-
-	clkuart2: clkuart2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart2";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart3: clkuart3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart3";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-};
diff --git a/src/arm/k2l-evm.dts b/src/arm/k2l-evm.dts
deleted file mode 100644
index fec43128a2e0..000000000000
--- a/src/arm/k2l-evm.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "k2l.dtsi"
-
-/ {
-	compatible =  "ti,k2l-evm","ti,keystone";
-	model = "Texas Instruments Keystone 2 Lamarr EVM";
-
-	soc {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x7FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
diff --git a/src/arm/k2l.dtsi b/src/arm/k2l.dtsi
deleted file mode 100644
index 1f7f479589e1..000000000000
--- a/src/arm/k2l.dtsi
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr SoC specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	soc {
-
-		/include/ "k2l-clocks.dtsi"
-
-		uart2: serial@02348400 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348400 0x100>;
-			clocks	= <&clkuart2>;
-			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart3:	serial@02348800 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348800 0x100>;
-			clocks	= <&clkuart3>;
-			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-};
diff --git a/src/arm/keystone-clocks.dtsi b/src/arm/keystone-clocks.dtsi
deleted file mode 100644
index 0c334b25781e..000000000000
--- a/src/arm/keystone-clocks.dtsi
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Device Tree Source for Keystone 2 clock tree
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	mainmuxclk: mainmuxclk@2310108 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-mux-clock";
-		clocks = <&mainpllclk>, <&refclksys>;
-		reg = <0x02310108 4>;
-		bit-shift = <23>;
-		bit-mask = <1>;
-		clock-output-names = "mainmuxclk";
-	};
-
-	chipclk1: chipclk1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mainmuxclk>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1";
-	};
-
-	chipclk1rstiso: chipclk1rstiso {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mainmuxclk>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso";
-	};
-
-	gemtraceclk: gemtraceclk@2310120 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-divider-clock";
-		clocks = <&mainmuxclk>;
-		reg = <0x02310120 4>;
-		bit-shift = <0>;
-		bit-mask = <8>;
-		clock-output-names = "gemtraceclk";
-	};
-
-	chipstmxptclk: chipstmxptclk {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-divider-clock";
-		clocks = <&mainmuxclk>;
-		reg = <0x02310164 4>;
-		bit-shift = <0>;
-		bit-mask = <8>;
-		clock-output-names = "chipstmxptclk";
-	};
-
-	chipclk12: chipclk12 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <2>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk12";
-	};
-
-	chipclk13: chipclk13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk13";
-	};
-
-	paclk13: paclk13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&papllclk>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "paclk13";
-	};
-
-	chipclk14: chipclk14 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk14";
-	};
-
-	chipclk16: chipclk16 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <6>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk16";
-	};
-
-	chipclk112: chipclk112 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <12>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk112";
-	};
-
-	chipclk124: chipclk124 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <24>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk114";
-	};
-
-	chipclk1rstiso13: chipclk1rstiso13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso13";
-	};
-
-	chipclk1rstiso14: chipclk1rstiso14 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso14";
-	};
-
-	chipclk1rstiso16: chipclk1rstiso16 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <6>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso16";
-	};
-
-	chipclk1rstiso112: chipclk1rstiso112 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <12>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso112";
-	};
-
-	clkmodrst0: clkmodrst0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "modrst0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-
-	clkusb: clkusb {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "usb";
-		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkaemifspi: clkaemifspi {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "aemif-spi";
-		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-
-	clkdebugsstrc: clkdebugsstrc {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "debugss-trc";
-		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <1>;
-	};
-
-	clktetbtrc: clktetbtrc {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tetb-trc";
-		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <1>;
-	};
-
-	clkpa: clkpa {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&paclk13>;
-		clock-output-names = "pa";
-		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clkcpgmac: clkcpgmac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkpa>;
-		clock-output-names = "cpgmac";
-		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clksa: clksa {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkpa>;
-		clock-output-names = "sa";
-		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clkpcie: clkpcie {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <3>;
-	};
-
-	clksr: clksr {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1rstiso112>;
-		clock-output-names = "sr";
-		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <6>;
-	};
-
-	clkgem0: clkgem0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem0";
-		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <8>;
-	};
-
-	clkddr30: clkddr30 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "ddr3-0";
-		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <16>;
-	};
-
-	clkwdtimer0: clkwdtimer0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer1: clkwdtimer1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer1";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer2: clkwdtimer2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer2";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer3: clkwdtimer3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer3";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clktimer15: clktimer15 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer15";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart0: clkuart0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart1: clkuart1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart1";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkaemif: clkaemif {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkaemifspi>;
-		clock-output-names = "aemif";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkusim: clkusim {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "usim";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clki2c: clki2c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "i2c";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkspi: clkspi {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkaemifspi>;
-		clock-output-names = "spi";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkgpio: clkgpio {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "gpio";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkkeymgr: clkkeymgr {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "keymgr";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-};
diff --git a/src/arm/keystone.dtsi b/src/arm/keystone.dtsi
deleted file mode 100644
index 9e31fe7d31f8..000000000000
--- a/src/arm/keystone.dtsi
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Copyright 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "Texas Instruments Keystone 2 SoC";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0	= &uart0;
-	};
-
-	memory {
-		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
-	};
-
-	gic: interrupt-controller {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x02561000 0x0 0x1000>,
-		      <0x0 0x02562000 0x0 0x2000>,
-		      <0x0 0x02564000 0x0 0x1000>,
-		      <0x0 0x02566000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,keystone","simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
-
-		pllctrl: pll-controller@02310000 {
-			compatible = "ti,keystone-pllctrl", "syscon";
-			reg = <0x02310000 0x200>;
-		};
-
-		devctrl: device-state-control@02620000 {
-			compatible = "ti,keystone-devctrl", "syscon";
-			reg = <0x02620000 0x1000>;
-		};
-
-		rstctrl: reset-controller {
-			compatible = "ti,keystone-reset";
-			ti,syscon-pll = <&pllctrl 0xe4>;
-			ti,syscon-dev = <&devctrl 0x328>;
-			ti,wdt-list = <0>;
-		};
-
-		/include/ "keystone-clocks.dtsi"
-
-		uart0: serial@02530c00 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02530c00 0x100>;
-			clocks	= <&clkuart0>;
-			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart1:	serial@02531000 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02531000 0x100>;
-			clocks	= <&clkuart1>;
-			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		i2c0: i2c@2530000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530000 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@2530400 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530400 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@2530800 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530800 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi0: spi@21000400 {
-			compatible = "ti,dm6441-spi";
-			reg = <0x21000400 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@21000600 {
-			compatible = "ti,dm6441-spi";
-			reg = <0x21000600 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi2: spi@21000800 {
-			compatible = "ti,dm6441-spi";
-			reg = <0x21000800 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		usb_phy: usb_phy@2620738 {
-			compatible = "ti,keystone-usbphy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2620738 32>;
-			status = "disabled";
-		};
-
-		usb: usb@2680000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2680000 0x10000>;
-			clocks = <&clkusb>;
-			clock-names = "usb";
-			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			dma-coherent;
-			dma-ranges;
-			status = "disabled";
-
-			dwc3@2690000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x2690000 0x70000>;
-				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-				usb-phy = <&usb_phy>, <&usb_phy>;
-			};
-		};
-
-		wdt: wdt@022f0080 {
-			compatible = "ti,keystone-wdt","ti,davinci-wdt";
-			reg = <0x022f0080 0x80>;
-			clocks = <&clkwdtimer0>;
-		};
-
-		clock_event: timer@22f0000 {
-			compatible = "ti,keystone-timer";
-			reg = <0x022f0000 0x80>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clktimer15>;
-		};
-
-		gpio0: gpio@260bf00 {
-			compatible = "ti,keystone-gpio";
-			reg = <0x0260bf00 0x100>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			/* HW Interrupts mapped to GPIO pins */
-			interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkgpio>;
-			clock-names = "gpio";
-			ti,ngpio = <32>;
-			ti,davinci-gpio-unbanked = <32>;
-		};
-
-		aemif: aemif@21000A00 {
-			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			clocks = <&clkaemif>;
-			clock-names = "aemif";
-			clock-ranges;
-
-			reg = <0x21000A00 0x00000100>;
-			ranges = <0 0 0x30000000 0x10000000
-				  1 0 0x21000A00 0x00000100>;
-		};
-
-		mdio: mdio@02090300 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg		= <0x02090300 0x100>;
-			status = "disabled";
-			clocks = <&clkpa>;
-			clock-names = "fck";
-			bus_freq	= <2500000>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-6192.dtsi b/src/arm/kirkwood-6192.dtsi
deleted file mode 100644
index dd81508b919b..000000000000
--- a/src/arm/kirkwood-6192.dtsi
+++ /dev/null
@@ -1,84 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6192-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-6281.dtsi b/src/arm/kirkwood-6281.dtsi
deleted file mode 100644
index 7dc7d6782e83..000000000000
--- a/src/arm/kirkwood-6281.dtsi
+++ /dev/null
@@ -1,88 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6281-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-6282.dtsi b/src/arm/kirkwood-6282.dtsi
deleted file mode 100644
index 4680eec990f0..000000000000
--- a/src/arm/kirkwood-6282.dtsi
+++ /dev/null
@@ -1,138 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-
-			pcie1: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 18>;
-				status = "disabled";
-			};
-		};
-	};
-	ocp@f1000000 {
-
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6282-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-
-			/*
-			 * Default I2C1 pinctrl setting on mpp36/mpp37,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_twsi1: pmx-twsi1 {
-				marvell,pins = "mpp36", "mpp37";
-				marvell,function = "twsi1";
-			};
-
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		thermal: thermal@10078 {
-			compatible = "marvell,kirkwood-thermal";
-			reg = <0x10078 0x4>;
-			status = "okay";
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		i2c1: i2c@11100 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11100 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <32>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_twsi1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-98dx4122.dtsi b/src/arm/kirkwood-98dx4122.dtsi
deleted file mode 100644
index 9e1f741d74ff..000000000000
--- a/src/arm/kirkwood-98dx4122.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,98dx4122-pinctrl";
-
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "disabled";
-};
-
-&sata_phy1 {
-	status = "disabled";
-};
diff --git a/src/arm/kirkwood-b3.dts b/src/arm/kirkwood-b3.dts
deleted file mode 100644
index c9247f8672ae..000000000000
--- a/src/arm/kirkwood-b3.dts
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Device Tree file for Excito Bubba B3
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Note: This requires a new'ish version of u-boot, which disables the
- * L2 cache. If your B3 silently fails to boot, u-boot is probably too
- * old. Either upgrade, or consider the following email:
- *
- * http://lists.debian.org/debian-arm/2012/08/msg00128.html
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Excito B3";
-	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-	memory { /* 512 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Wifi model has Atheros chipset on pcie port */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_blue: pmx-led-blue {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_beeper: pmx-beeper {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p16@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p16";
-				reg = <0>;
-				spi-max-frequency = <40000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0xc0000>;
-					label = "u-boot";
-				};
-
-				partition@c0000 {
-					reg = <0xc0000 0x20000>;
-					label = "u-boot env";
-				};
-
-				partition@e0000 {
-					reg = <0xe0000 0x120000>;
-					label = "data";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-			/*
-			 * There is something on the bus at address 0x64.
-			 * Not yet identified what it is, maybe the eeprom
-			 * for the Atheros WiFi chip?
-			 */
-		};
-
-
-		serial@12000 {
-			/* Internal on test pins, 3.3v TTL
-		 	 * UART0_RX = Testpoint 65
-			 * UART0_TX = Testpoint 66
-			 * See the Excito Wiki for more details.
-		 	 */
-			status = "okay";
-		};
-
-		sata@80000 {
-			/* One internal, the second as eSATA */
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-leds {
-		/*
-		 * There is one LED "port" on the front and the colours
-		 * mix together giving some interesting combinations.
-		 */
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_green &pmx_led_red
-			      &pmx_led_blue >;
-		pinctrl-names = "default";
-
-		programming_led {
-			label = "bubba3:green:programming";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		error_led {
-			label = "bubba3:red:error";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		active_led {
-			label = "bubba3:blue:active";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power>;
-		pinctrl-names = "default";
-
-		power-button {
-			/* On the back */
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	beeper: beeper {
-		/* 4KHz Piezoelectric buzzer */
-		compatible = "gpio-beeper";
-		pinctrl-0 = <&pmx_beeper>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@24 {
-		device_type = "ethernet-phy";
-		reg = <24>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
diff --git a/src/arm/kirkwood-cloudbox.dts b/src/arm/kirkwood-cloudbox.dts
deleted file mode 100644
index ab6ab4933e6b..000000000000
--- a/src/arm/kirkwood-cloudbox.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "LaCie CloudBox";
-	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
-				marvell,pins = "mpp15";
-				marvell,function = "sata0";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_cloudbox_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "cloudbox:red:fail";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-		blue-sata {
-			label = "cloudbox:blue:sata";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-d2net.dts b/src/arm/kirkwood-d2net.dts
deleted file mode 100644
index 6b7856025001..000000000000
--- a/src/arm/kirkwood-d2net.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Device Tree file for d2 Network v2
- *
- * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie d2 Network v2";
-	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "d2net_v2:blue:sata";
-			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "d2net_v2:red:fail";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-db-88f6281.dts b/src/arm/kirkwood-db-88f6281.dts
deleted file mode 100644
index c39dd766c75a..000000000000
--- a/src/arm/kirkwood-db-88f6281.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell DB-88F6281-BP Development Board";
-	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/kirkwood-db-88f6282.dts b/src/arm/kirkwood-db-88f6282.dts
deleted file mode 100644
index 701c6b6cdaa2..000000000000
--- a/src/arm/kirkwood-db-88f6282.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Marvell DB-88F6282-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Marvell DB-88F6282-BP Development Board";
-	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/kirkwood-db.dtsi b/src/arm/kirkwood-db.dtsi
deleted file mode 100644
index 812df691ae3d..000000000000
--- a/src/arm/kirkwood-db.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_sdio_gpios: pmx-sdio-gpios {
-				marvell,pins = "mpp37", "mpp38";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio_gpios>;
-			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			status = "okay";
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-dns320.dts b/src/arm/kirkwood-dns320.dts
deleted file mode 100644
index d85ef0a91b50..000000000000
--- a/src/arm/kirkwood-dns320.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-dnskw.dtsi"
-
-/ {
-	model = "D-Link DNS-320 NAS (Rev A1)";
-	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
-			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
-			     &pmx_led_white_usb>;
-		pinctrl-names = "default";
-
-		blue-power {
-			label = "dns320:blue:power";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		blue-usb {
-			label = "dns320:blue:usb";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		orange-l_hdd {
-			label = "dns320:orange:l_hdd";
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-		orange-r_hdd {
-			label = "dns320:orange:r_hdd";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-		orange-usb {
-			label = "dns320:orange:usb";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
-		};
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-dns325.dts b/src/arm/kirkwood-dns325.dts
deleted file mode 100644
index 5e586ed04c58..000000000000
--- a/src/arm/kirkwood-dns325.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-dnskw.dtsi"
-
-/ {
-	model = "D-Link DNS-325 NAS (Rev A1)";
-	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
-			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
-			     &pmx_led_white_usb>;
-		pinctrl-names = "default";
-
-		white-power {
-			label = "dns325:white:power";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		white-usb {
-			label = "dns325:white:usb";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
-		};
-		red-l_hdd {
-			label = "dns325:red:l_hdd";
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-		red-r_hdd {
-			label = "dns325:red:r_hdd";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-		red-usb {
-			label = "dns325:red:usb";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-
-			lm75: lm75@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-dnskw.dtsi b/src/arm/kirkwood-dnskw.dtsi
deleted file mode 100644
index 113dcf056dcf..000000000000
--- a/src/arm/kirkwood-dnskw.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "D-Link DNS NASes (kirkwood-based)";
-	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "USB unmount button";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
-			 &gpio1 13 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
-				     &pmx_present_sata1 &pmx_fan_tacho
-				     &pmx_temp_alarm>;
-			pinctrl-names = "default";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp20";
-				marvell,function = "sata1";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp21";
-				marvell,function = "sata0";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp26";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_usb_325: pmx-led-red-usb-325 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_usb_320: pmx-led-red-usb-320 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_power_back_on: pmx-power-back-on {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_power_sata0: pmx-power-sata0 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_power_sata1: pmx-power-sata1 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_present_sata0: pmx-present-sata0 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_present_sata1: pmx-present-sata1 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_white_usb: pmx-led-white-usb {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_fan_tacho: pmx-fan-tacho {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high_speed: pmx-fan-high-speed {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low_speed: pmx-fan-low-speed {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_button_unmount: pmx-button-unmount {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_temp_alarm: pmx-temp-alarm {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 7 0>;
-		};
-		sata1_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 8 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x500000>;
-	};
-
-	partition@600000 {
-		label = "ramdisk";
-		reg = <0x0600000 0x500000>;
-	};
-
-	partition@b00000 {
-		label = "image";
-		reg = <0x0b00000 0x6600000>;
-	};
-
-	partition@7100000 {
-		label = "mini firmware";
-		reg = <0x7100000 0xa00000>;
-	};
-
-	partition@7b00000 {
-		label = "config";
-		reg = <0x7b00000 0x500000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-dockstar.dts b/src/arm/kirkwood-dockstar.dts
deleted file mode 100644
index 849736349511..000000000000
--- a/src/arm/kirkwood-dockstar.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate FreeAgent Dockstar";
-	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led-orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "data";
-		reg = <0x0500000 0xfb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88e1116";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-dreamplug.dts b/src/arm/kirkwood-dreamplug.dts
deleted file mode 100644
index 6467c7924195..000000000000
--- a/src/arm/kirkwood-dreamplug.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Globalscale Technologies Dreamplug";
-	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_bluetooth: pmx-led-bluetooth {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_wifi: pmx-led-wifi {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_wifi_ap: pmx-led-wifi-ap {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l1606e";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-
-				partition@100000 {
-					reg = <0x100000 0x10000>;
-					label = "u-boot env";
-				};
-
-				partition@180000 {
-					reg = <0x180000 0x10000>;
-					label = "dtb";
-				};
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
-			     &pmx_led_wifi_ap >;
-		pinctrl-names = "default";
-
-		bluetooth {
-			label = "dreamplug:blue:bluetooth";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wifi {
-			label = "dreamplug:green:wifi";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-		wifi-ap {
-			label = "dreamplug:green:wifi_ap";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-ds109.dts b/src/arm/kirkwood-ds109.dts
deleted file mode 100644
index d4bcc1c7f6b3..000000000000
--- a/src/arm/kirkwood-ds109.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS109, DS110, DS110jv20";
-	compatible = "synology,ds109", "synology,ds110jv20",
-		     "synology,ds110", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds110jv10.dts b/src/arm/kirkwood-ds110jv10.dts
deleted file mode 100644
index 95bf83b91b4a..000000000000
--- a/src/arm/kirkwood-ds110jv10.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS110j v10 and v30";
-	compatible = "synology,ds110jv10", "synology,ds110jv30",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds111.dts b/src/arm/kirkwood-ds111.dts
deleted file mode 100644
index 61f47fbe44d0..000000000000
--- a/src/arm/kirkwood-ds111.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS111";
-	compatible = "synology,ds111", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds112.dts b/src/arm/kirkwood-ds112.dts
deleted file mode 100644
index bf4143c6cb8f..000000000000
--- a/src/arm/kirkwood-ds112.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS111";
-	compatible = "synology,ds111", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-30 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds209.dts b/src/arm/kirkwood-ds209.dts
deleted file mode 100644
index 6d25093a9ac4..000000000000
--- a/src/arm/kirkwood-ds209.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS209";
-	compatible = "synology,ds209", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-31 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds210.dts b/src/arm/kirkwood-ds210.dts
deleted file mode 100644
index 2f1933efcac1..000000000000
--- a/src/arm/kirkwood-ds210.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS210 v10, v20, v30, DS211j";
-	compatible = "synology,ds210jv10", "synology,ds210jv20",
-		     "synology,ds210jv30", "synology,ds211j",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-31 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds212.dts b/src/arm/kirkwood-ds212.dts
deleted file mode 100644
index 99afd462f956..000000000000
--- a/src/arm/kirkwood-ds212.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
-	compatible = "synology,ds212", "synology,ds212pv10",
-		     "synology,ds212pv10", "synology,ds212pv20",
-		     "synology,ds213airv10", "synology,ds213v10",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds212j.dts b/src/arm/kirkwood-ds212j.dts
deleted file mode 100644
index f5c4213fc67c..000000000000
--- a/src/arm/kirkwood-ds212j.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS212j v10, v20";
-	compatible = "synology,ds212jv10", "synology,ds212jv20",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds409.dts b/src/arm/kirkwood-ds409.dts
deleted file mode 100644
index e80a962ebba0..000000000000
--- a/src/arm/kirkwood-ds409.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS409, DS410j";
-	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	gpio-leds-alarm-12 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds409slim.dts b/src/arm/kirkwood-ds409slim.dts
deleted file mode 100644
index cae5af4b88b5..000000000000
--- a/src/arm/kirkwood-ds409slim.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology 409slim";
-	compatible = "synology,ds409slim", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-20 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds411.dts b/src/arm/kirkwood-ds411.dts
deleted file mode 100644
index 623cd4a37d71..000000000000
--- a/src/arm/kirkwood-ds411.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411, DS413jv10";
-	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	regulators-hdd-34 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds411j.dts b/src/arm/kirkwood-ds411j.dts
deleted file mode 100644
index 3348e330f074..000000000000
--- a/src/arm/kirkwood-ds411j.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411j";
-	compatible = "synology,ds411j", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	gpio-leds-alarm-12 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds411slim.dts b/src/arm/kirkwood-ds411slim.dts
deleted file mode 100644
index a0a1fad8b4de..000000000000
--- a/src/arm/kirkwood-ds411slim.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411slim";
-	compatible = "synology,ds411slim", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-goflexnet.dts b/src/arm/kirkwood-goflexnet.dts
deleted file mode 100644
index aa60a0b049a7..000000000000
--- a/src/arm/kirkwood-goflexnet.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate GoFlex Net";
-	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_0: pmx-led_right_cap_0 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_1: pmx-led_right_cap_1 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_2: pmx-led_right_cap_2 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_3: pmx-led_right_cap_3 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_0: pmx-led_left_cap_0 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_1: pmx-led_left_cap_1 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_2: pmx-led_left_cap_2 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_3: pmx-led_left_cap_3 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led_green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led_orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_orange
-			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
-			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
-			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
-			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
-			    >;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		left0 {
-			label = "status:white:left0";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		left1 {
-			label = "status:white:left1";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-		left2 {
-			label = "status:white:left2";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-		left3 {
-			label = "status:white:left3";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-		right0 {
-			label = "status:white:right0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-		right1 {
-			label = "status:white:right1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		right2 {
-			label = "status:white:right2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-		right3 {
-			label = "status:white:right3";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <40>;
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "pogoplug";
-		reg = <0x0500000 0x2000000>;
-	};
-
-	partition@2500000 {
-		label = "root";
-		reg = <0x02500000 0xd800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-guruplug-server-plus.dts b/src/arm/kirkwood-guruplug-server-plus.dts
deleted file mode 100644
index b2d9834bf458..000000000000
--- a/src/arm/kirkwood-guruplug-server-plus.dts
+++ /dev/null
@@ -1,132 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Globalscale Technologies Guruplug Server Plus";
-	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_health_r: pmx-led-health-r {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_g: pmx-led-health-g {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_wmode_r: pmx-led-wmode-r {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_wmode_g: pmx-led-wmode-g {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		/* AzureWave AW-GH381 WiFi/BT */
-		mvsdio@90000 {
-			status = "okay";
-			non-removable;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
-			      &pmx_led_wmode_r &pmx_led_wmode_g >;
-		pinctrl-names = "default";
-
-		health-r {
-			label = "guruplug:red:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-		health-g {
-			label = "guruplug:green:health";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wmode-r {
-			label = "guruplug:red:wmode";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-		wmode-g {
-			label = "guruplug:green:wmode";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x00000000 0x00100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x00100000 0x00400000>;
-	};
-
-	partition@500000 {
-		label = "data";
-		reg = <0x00500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/arm/kirkwood-ib62x0.dts b/src/arm/kirkwood-ib62x0.dts
deleted file mode 100644
index bfa5edde179c..000000000000
--- a/src/arm/kirkwood-ib62x0.dts
+++ /dev/null
@@ -1,145 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_os_red: pmx-led-os-red {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-			pmx_led_os_green: pmx-led-os-green {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb_transfer: pmx-led-usb-transfer {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_button_usb_copy: pmx-button-usb-copy {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
-			     &pmx_led_usb_transfer>;
-		pinctrl-names = "default";
-
-		green-os {
-			label = "ib62x0:green:os";
-			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		red-os {
-			label = "ib62x0:red:os";
-			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-		};
-		usb-copy {
-			label = "ib62x0:red:usb_copy";
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0xe0000>;
-	};
-
-	partition@e0000 {
-		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x600000>;
-	};
-
-	partition@700000 {
-		label = "root";
-		reg = <0x0700000 0xf900000>;
-	};
-
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-iconnect.dts b/src/arm/kirkwood-iconnect.dts
deleted file mode 100644
index 38e31d15a62d..000000000000
--- a/src/arm/kirkwood-iconnect.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Iomega Iconnect";
-	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-		linux,initrd-start = <0x4500040>;
-		linux,initrd-end   = <0x4800000>;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_button_otb: pmx-button-otb {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_level: pmx-led-level {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_blue: pmx-led-power-blue {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_red: pmx-power-red {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb1: pmx-led-usb1 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb2: pmx-led-usb2 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb3: pmx-led-usb3 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb4: pmx-led-usb4 {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_otb: pmx-led-otb {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-		i2c@11000 {
-			status = "okay";
-
-			lm63: lm63@4c {
-				compatible = "national,lm63";
-				reg = <0x4c>;
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
-			      &pmx_led_power_red &pmx_led_usb1
-			      &pmx_led_usb2 &pmx_led_usb3
-			      &pmx_led_usb4 &pmx_led_otb >;
-		pinctrl-names = "default";
-
-		led-level {
-			label = "led_level";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		power-blue {
-			label = "power:blue";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		power-red {
-			label = "power:red";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-		usb1 {
-			label = "usb1:blue";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-		usb2 {
-			label = "usb2:blue";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-		usb3 {
-			label = "usb3:blue";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		usb4 {
-			label = "usb4:blue";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-		otb {
-			label = "otb:blue";
-			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "OTB Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0xc0000>;
-	};
-
-	partition@a0000 {
-		label = "env";
-		reg = <0xa0000 0x20000>;
-	};
-
-	partition@100000 {
-		label = "zImage";
-		reg = <0x100000 0x300000>;
-	};
-
-	partition@540000 {
-		label = "initrd";
-		reg = <0x540000 0x300000>;
-	};
-
-	partition@980000 {
-		label = "boot";
-		reg = <0x980000 0x1f400000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@11 {
-		reg = <11>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-iomega_ix2_200.dts b/src/arm/kirkwood-iomega_ix2_200.dts
deleted file mode 100644
index 05291f3990d0..000000000000
--- a/src/arm/kirkwood-iomega_ix2_200.dts
+++ /dev/null
@@ -1,221 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Iomega StorCenter ix2-200";
-	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
-				      &pmx_led_sata_brt_ctrl_2
-				      &pmx_led_backup_brt_ctrl_1
-				      &pmx_led_backup_brt_ctrl_2
-				      &pmx_led_power_brt_ctrl_1
-				      &pmx_led_power_brt_ctrl_2
-				      &pmx_led_health_brt_ctrl_1
-				      &pmx_led_health_brt_ctrl_2
-				      &pmx_led_rebuild_brt_ctrl_1
-				      &pmx_led_rebuild_brt_ctrl_2 >;
-			pinctrl-names = "default";
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup: pmx-led-backup {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_button_otb: pmx-button-otb {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild: pmx-led-rebuild {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_health: pmx-led_health {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-		};
-		i2c@11000 {
-			status = "okay";
-
-			lm63: lm63@4c {
-				compatible = "national,lm63";
-				reg = <0x4c>;
-			};
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_backup &pmx_led_power
-			      &pmx_led_rebuild &pmx_led_health >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:white:power_led";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		rebuild_led {
-			label = "status:white:rebuild_led";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		};
-		health_led {
-			label = "status:red:health_led";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_reset &pmx_button_power
-			     &pmx_button_otb>;
-		pinctrl-names = "default";
-
-
-		Power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-		Reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-		OTB {
-			label = "OTB Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@a0000 {
-		label = "env";
-		reg = <0xa0000 0x20000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x300000>;
-	};
-
-	partition@400000 {
-		label = "uInitrd";
-		reg = <0x540000 0x1000000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@11 {
-		reg = <11>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-is2.dts b/src/arm/kirkwood-is2.dts
deleted file mode 100644
index da674bbd49a8..000000000000
--- a/src/arm/kirkwood-is2.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Internet Space v2";
-	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-km_common.dtsi b/src/arm/kirkwood-km_common.dtsi
deleted file mode 100644
index 8367c772c764..000000000000
--- a/src/arm/kirkwood-km_common.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
-			pinctrl-names = "default";
-
-			pmx_i2c_gpio_sda: pmx-gpio-sda {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_i2c_gpio_scl: pmx-gpio-scl {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <25>;
-};
diff --git a/src/arm/kirkwood-km_fixedeth.dts b/src/arm/kirkwood-km_fixedeth.dts
deleted file mode 100644
index 9895f2b10f8a..000000000000
--- a/src/arm/kirkwood-km_fixedeth.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-98dx4122.dtsi"
-#include "kirkwood-km_common.dtsi"
-
-/ {
-	model = "Keymile Kirkwood Fixed Eth";
-	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;  /* <SPEED_1000> */
-		duplex = <1>; /* <DUPLEX_FULL> */
-	};
-};
diff --git a/src/arm/kirkwood-km_kirkwood.dts b/src/arm/kirkwood-km_kirkwood.dts
deleted file mode 100644
index 235bf382fff9..000000000000
--- a/src/arm/kirkwood-km_kirkwood.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-98dx4122.dtsi"
-#include "kirkwood-km_common.dtsi"
-
-/ {
-	model = "Keymile Kirkwood Reference Design";
-	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-laplug.dts b/src/arm/kirkwood-laplug.dts
deleted file mode 100644
index 24425660e973..000000000000
--- a/src/arm/kirkwood-laplug.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "LaCie LaPlug";
-	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>; /* 128 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c04";
-				pagesize = <16>;
-				reg = <0x50>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button@1{
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "laplug_v2:red:power";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		blue-power {
-			label = "laplug_v2:blue:power";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power_back1: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Back 1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_back2: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "USB Power Back 2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_front: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "USB Power Front";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	/* Total size : 512MB */
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x100000>; /* 1MB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x1000000>; /* 16MB */
-	};
-
-	partition@1100000 {
-		label = "rootfs";
-		reg = <0x1100000 0x1EF00000>; /* 495MB */
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-lschlv2.dts b/src/arm/kirkwood-lschlv2.dts
deleted file mode 100644
index e2fa368aef25..000000000000
--- a/src/arm/kirkwood-lschlv2.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-CHLv2";
-	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-lsxhl.dts b/src/arm/kirkwood-lsxhl.dts
deleted file mode 100644
index 8d89cdf8d6bf..000000000000
--- a/src/arm/kirkwood-lsxhl.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-XHL";
-	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-lsxl.dtsi b/src/arm/kirkwood-lsxl.dtsi
deleted file mode 100644
index 53484474df1f..000000000000
--- a/src/arm/kirkwood-lsxl.dtsi
+++ /dev/null
@@ -1,236 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd: pmx-power-hdd {
-				marvell,pins = "mpp10";
-				marvell,function = "gpo";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp11";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp18";
-				marvell,function = "gpo";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp19";
-				marvell,function = "gpo";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function_red {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p40";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x60000>;
-					label = "uboot";
-					read-only;
-				};
-
-				partition@60000 {
-					reg = <0x60000 0x10000>;
-					label = "dtb";
-					read-only;
-				};
-
-				partition@70000 {
-					reg = <0x70000 0x10000>;
-					label = "uboot_env";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_function &pmx_power_switch
-			     &pmx_power_auto_switch>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "lsxl:blue:func";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		led@2 {
-			label = "lsxl:red:alarm";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-
-		led@3 {
-			label = "lsxl:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led@4 {
-			label = "lsxl:blue:power";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		led@5 {
-			label = "lsxl:red:func";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
-		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
-		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 11 0>;
-		};
-		hdd_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 10 0>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-mplcec4.dts b/src/arm/kirkwood-mplcec4.dts
deleted file mode 100644
index f3a991837515..000000000000
--- a/src/arm/kirkwood-mplcec4.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "MPL CEC4";
-	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_health: pmx-led-health {
-				marvell,pins = "mpp7";
-				marvell,function = "gpo";
-			};
-
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp34";
-				marvell,function = "sata1";
-			};
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp35";
-				marvell,function = "sata0";
-			};
-
-			pmx_led_user1o: pmx-led-user1o {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user1g: pmx-led-user1g {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user0o: pmx-led-user0o {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user0g: pmx-led-user0g {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_misc: pmx-led-misc {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-                i2c@11000 {
-                        status = "okay";
-
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c02";
-				reg = <0x57>;
-			};
-
-                };
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		rtc@10300 {
-			status = "disabled";
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			/* No WP GPIO */
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_health
-			      &pmx_led_user1o
-			      &pmx_led_user1g &pmx_led_user0o
-			      &pmx_led_user0g &pmx_led_misc
-			    >;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		};
-
-		user1o {
-			label = "user1:orange";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user1g {
-			label = "user1:green";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user0o {
-			label = "user0:orange";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user0g {
-			label = "user0:green";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		misc {
-			label = "status:orange:misc";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "env";
-		reg = <0x100000 0x80000>;
-	};
-
-	partition@180000 {
-		label = "fdt";
-		reg = <0x180000 0x80000>;
-	};
-
-	partition@200000 {
-		label = "kernel";
-		reg = <0x200000 0x400000>;
-	};
-
-	partition@600000 {
-		label = "rootfs";
-		reg = <0x600000 0x1fa00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	ethphy1: ethernet-phy@2 {
-		reg = <2>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-mv88f6281gtw-ge.dts b/src/arm/kirkwood-mv88f6281gtw-ge.dts
deleted file mode 100644
index 8f76d28759a3..000000000000
--- a/src/arm/kirkwood-mv88f6281gtw-ge.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Marvell 88F6281 GTW GE Board
- *
- * Lennert Buytenhek <buytenh@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell 88F6281 GTW GE Board";
-	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-        };
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_usb_led: pmx-usb-led {
-				marvell,pins = "mpp12";
-				marvell,function = "gpo";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp20", "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_keys: pmx-keys {
-				marvell,pins = "mpp46", "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l12805d";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
-		pinctrl-names = "default";
-
-		green-status {
-			label = "gtw:green:Status";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-status {
-			label = "gtw:red:Status";
-			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-usb {
-			label = "gtw:green:USB";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "SWR Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "WPS Button";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0>;
-		dsa,mii-bus = <&ethphy0>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@ff {
-		reg = <0xff>; 	/* No phy attached */
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-net2big.dts b/src/arm/kirkwood-net2big.dts
deleted file mode 100644
index 53dc37a3b687..000000000000
--- a/src/arm/kirkwood-net2big.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Device Tree file for LaCie 2Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie 2Big Network v2";
-	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-};
-
-&regulators {
-	regulator@2 {
-		compatible = "regulator-fixed";
-		reg = <2>;
-		regulator-name = "hdd1power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-};
-
-&i2c0 {
-	g762@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-		clocks = <&g762_clk>;
-	};
-};
diff --git a/src/arm/kirkwood-net5big.dts b/src/arm/kirkwood-net5big.dts
deleted file mode 100644
index 36155b749d9f..000000000000
--- a/src/arm/kirkwood-net5big.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Device Tree file for LaCie 5Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie 5Big Network v2";
-	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-};
-
-&regulators {
-	regulator@2 {
-		compatible = "regulator-fixed";
-		reg = <2>;
-		regulator-name = "hdd1power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@3 {
-		compatible = "regulator-fixed";
-		reg = <3>;
-		regulator-name = "hdd2power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@4 {
-		compatible = "regulator-fixed";
-		reg = <4>;
-		regulator-name = "hdd3power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@5 {
-		compatible = "regulator-fixed";
-		reg = <5>;
-		regulator-name = "hdd4power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-};
-
-&mdio {
-	ethphy1: ethernet-phy@1 {
-		reg = <0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
-
-&i2c0 {
-	g762@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-		clocks = <&g762_clk>;
-	};
-};
diff --git a/src/arm/kirkwood-netgear_readynas_duo_v2.dts b/src/arm/kirkwood-netgear_readynas_duo_v2.dts
deleted file mode 100644
index fd733c63bc27..000000000000
--- a/src/arm/kirkwood-netgear_readynas_duo_v2.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS Duo v2
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS Duo v2";
-	compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_backup: pmx-button-backup {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_power: pmx-led-blue-power {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_activity: pmx-led-blue-activity {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk1: pmx-led-blue-disk1 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk2: pmx-led-blue-disk2 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_backup: pmx-led-blue-backup {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_poweroff: pmx-poweroff {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-		};
-
-		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			rs5c372a: rs5c372a@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-
-			g762: g762@3e {
-				compatible = "gmt,g762";
-				reg = <0x3e>;
-				clocks = <&g762_clk>; /* input clock */
-				fan_gear_mode = <0>;
-				fan_startv = <1>;
-				pwm_polarity = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
-			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
-			      &pmx_led_blue_backup >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:blue:power_led";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		activity_led {
-			label = "status:blue:activity_led";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		disk1_led {
-			label = "status:blue:disk1_led";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		disk2_led {
-			label = "status:blue:disk2_led";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power &pmx_button_backup
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_regulator: usb3-regulator {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB 3.0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-		read-only;
-	};
-
-	partition@180000 {
-		label = "u-boot-env";
-		reg = <0x180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "minirootfs";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "jffs2";
-		reg = <0x1800000 0x6800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-netgear_readynas_nv+_v2.dts b/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
deleted file mode 100644
index b514d643fb6c..000000000000
--- a/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS NV+ v2
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS NV+ v2";
-	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to NEC uPD720200 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_backup: pmx-button-backup {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_power: pmx-led-blue-power {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_backup: pmx-led-blue-backup {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk1: pmx-led-blue-disk1 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk2: pmx-led-blue-disk2 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk3: pmx-led-blue-disk3 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk4: pmx-led-blue-disk4 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_poweroff: pmx-poweroff {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-		};
-
-		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			rs5c372a: rs5c372a@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-
-			g762: g762@3e {
-				compatible = "gmt,g762";
-				reg = <0x3e>;
-				clocks = <&g762_clk>; /* input clock */
-				fan_gear_mode = <0>;
-				fan_startv = <1>;
-				pwm_polarity = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
-			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
-			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:blue:power_led";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		disk1_led {
-			label = "status:blue:disk1_led";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		disk2_led {
-			label = "status:blue:disk2_led";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		disk3_led {
-			label = "status:blue:disk3_led";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		disk4_led {
-			label = "status:blue:disk4_led";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power &pmx_button_backup
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_regulator: usb3-regulator {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB 3.0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-		read-only;
-	};
-
-	partition@180000 {
-		label = "u-boot-env";
-		reg = <0x180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "minirootfs";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "jffs2";
-		reg = <0x1800000 0x6800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-netxbig.dtsi b/src/arm/kirkwood-netxbig.dtsi
deleted file mode 100644
index b0cfb7cd30b9..000000000000
--- a/src/arm/kirkwood-netxbig.dtsi
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Device Tree common file for LaCie 2Big and 5Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/*
-		 * button@1 and button@2 represent a three position rocker
-		 * switch. Thus the conventional KEY_POWER does not fit
-		 */
-		button@1 {
-			label = "Back power switch (on|auto)";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Back power switch (auto|off)";
-			linux,code = <KEY_1>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Function button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators: regulators {
-		status = "okay";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd0power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-
-	pmx_button_function: pmx-button-function {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-	pmx_button_power_off: pmx-button-power-off {
-		marvell,pins = "mpp15";
-		marvell,function = "gpio";
-	};
-	pmx_button_power_on: pmx-button-power-on {
-		marvell,pins = "mpp13";
-		marvell,function = "gpio";
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
diff --git a/src/arm/kirkwood-ns2-common.dtsi b/src/arm/kirkwood-ns2-common.dtsi
deleted file mode 100644
index fe6c0246db1a..000000000000
--- a/src/arm/kirkwood-ns2-common.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_ns2_sata0: pmx-ns2-sata0 {
-				marvell,pins = "mpp21";
-				marvell,function = "sata0";
-			};
-			pmx_ns2_sata1: pmx-ns2-sata1 {
-				marvell,pins = "mpp20";
-				marvell,function = "sata1";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c04";
-				pagesize = <16>;
-				reg = <0x50>;
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "ns2:red:fail";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy {
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-ns2.dts b/src/arm/kirkwood-ns2.dts
deleted file mode 100644
index 53368d1022cc..000000000000
--- a/src/arm/kirkwood-ns2.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space v2";
-	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ns2lite.dts b/src/arm/kirkwood-ns2lite.dts
deleted file mode 100644
index 1f2ca60d8b3d..000000000000
--- a/src/arm/kirkwood-ns2lite.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space Lite v2";
-	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-ns2max.dts b/src/arm/kirkwood-ns2max.dts
deleted file mode 100644
index 72c78d0b1116..000000000000
--- a/src/arm/kirkwood-ns2max.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space Max v2";
-	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
-			 &gpio0  7 GPIO_ACTIVE_LOW
-			 &gpio1  1 GPIO_ACTIVE_LOW
-			 &gpio0 23 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ns2mini.dts b/src/arm/kirkwood-ns2mini.dts
deleted file mode 100644
index c441bf62c09f..000000000000
--- a/src/arm/kirkwood-ns2mini.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	/* This machine is embedded in the first LaCie CloudBox product. */
-	model = "LaCie Network Space Mini v2";
-	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
-			 &gpio0  7 GPIO_ACTIVE_LOW
-			 &gpio1  1 GPIO_ACTIVE_LOW
-			 &gpio0 23 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-nsa310-common.dtsi b/src/arm/kirkwood-nsa310-common.dtsi
deleted file mode 100644
index aa78c2d11fe7..000000000000
--- a/src/arm/kirkwood-nsa310-common.dtsi
+++ /dev/null
@@ -1,107 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "ZyXEL NSA310";
-
-	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-
-			pmx_usb_power_off: pmx-usb-power-off {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-			pmx_pwr_off: pmx-pwr-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_off>;
-		pinctrl-names = "default";
-
-		usb0_power_off: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Off";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x0100000>;
-		read-only;
-	};
-	partition@100000 {
-		label = "uboot_env";
-		reg = <0x0100000 0x0080000>;
-	};
-	partition@180000 {
-		label = "key_store";
-		reg = <0x0180000 0x0080000>;
-	};
-	partition@200000 {
-		label = "info";
-		reg = <0x0200000 0x0080000>;
-	};
-	partition@280000 {
-		label = "etc";
-		reg = <0x0280000 0x0a00000>;
-	};
-	partition@c80000 {
-		label = "kernel_1";
-		reg = <0x0c80000 0x0a00000>;
-	};
-	partition@1680000 {
-		label = "rootfs1";
-		reg = <0x1680000 0x2fc0000>;
-	};
-	partition@4640000 {
-		label = "kernel_2";
-		reg = <0x4640000 0x0a00000>;
-	};
-	partition@5040000 {
-		label = "rootfs2";
-		reg = <0x5040000 0x2fc0000>;
-	};
-};
diff --git a/src/arm/kirkwood-nsa310.dts b/src/arm/kirkwood-nsa310.dts
deleted file mode 100644
index 6139df0f376c..000000000000
--- a/src/arm/kirkwood-nsa310.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
-	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_unknown>;
-			pinctrl-names = "default";
-
-			pmx_led_esata_green: pmx-led-esata-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_esata_red: pmx-led-esata-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_red: pmx-led-usb-red {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_green: pmx-led-hdd-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_red: pmx-led-hdd-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_unknown: pmx-unknown {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			adt7476: adt7476a@2e {
-				compatible = "adi,adt7476";
-				reg = <0x2e>;
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
-			     &pmx_led_usb_green &pmx_led_usb_red
-			     &pmx_led_sys_green &pmx_led_sys_red
-			     &pmx_led_copy_green &pmx_led_copy_red
-			     &pmx_led_hdd_green &pmx_led_hdd_red>;
-		pinctrl-names = "default";
-
-		green-sys {
-			label = "nsa310:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		red-sys {
-			label = "nsa310:red:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd {
-			label = "nsa310:green:hdd";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd {
-			label = "nsa310:red:hdd";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-esata {
-			label = "nsa310:green:esata";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-esata {
-			label = "nsa310:red:esata";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa310:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		red-usb {
-			label = "nsa310:red:usb";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa310:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa310:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-nsa310a.dts b/src/arm/kirkwood-nsa310a.dts
deleted file mode 100644
index 3d2b3d494c19..000000000000
--- a/src/arm/kirkwood-nsa310a.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/*
- * There are at least two different NSA310 designs. This variant does
- * not have the red USB Led.
- */
-
-/ {
-	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_led_esata_green: pmx-led-esata-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_esata_red: pmx-led-esata-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_green: pmx-led-hdd-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_red: pmx-led-hdd-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			lm85: lm85@2e {
-				compatible = "national,lm85";
-				reg = <0x2e>;
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		green-sys {
-			label = "nsa310:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		red-sys {
-			label = "nsa310:red:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd {
-			label = "nsa310:green:hdd";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd {
-			label = "nsa310:red:hdd";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-esata {
-			label = "nsa310:green:esata";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-esata {
-			label = "nsa310:red:esata";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa310:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa310:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa310:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-nsa320.dts b/src/arm/kirkwood-nsa320.dts
deleted file mode 100644
index 24f686d1044d..000000000000
--- a/src/arm/kirkwood-nsa320.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/* Device tree file for the Zyxel NSA 320 NAS box.
- *
- * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Based upon the board setup file created by Peter Schildmann */
-
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
-	model = "Zyxel NSA320";
-	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			/* SATA Activity and Present pins are not connected */
-			pmx_sata0: pmx-sata0 {
-				marvell,pins ;
-				marvell,function = "sata0";
-			};
-
-			pmx_sata1: pmx-sata1 {
-				marvell,pins ;
-				marvell,function = "sata1";
-			};
-
-			pmx_led_hdd2_green: pmx-led-hdd2-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd2_red: pmx-led-hdd2-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_data: pmx-mcu-data {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_clk: pmx-mcu-clk {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_act: pmx-mcu-act {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_orange: pmx-led-sys-orange {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_green: pmx-led-hdd1-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_red: pmx-led-hdd1-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_htp: pmx-htp {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			/* Buzzer needs to be switched at around 1kHz so is
-			   not compatible with the gpio-beeper driver. */
-			pmx_buzzer: pmx-buzzer {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_vid_b1: pmx-vid-b1 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_data: pmx-power-resume-data {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_clk: pmx-power-resume-clk {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			pcf8563: pcf8563@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	regulators {
-		usb0_power: regulator@1 {
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-			     &pmx_led_usb_green
-			     &pmx_led_sys_green &pmx_led_sys_orange
-			     &pmx_led_copy_green &pmx_led_copy_red
-			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
-		pinctrl-names = "default";
-
-		green-sys {
-			label = "nsa320:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		orange-sys {
-			label = "nsa320:orange:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd1 {
-			label = "nsa320:green:hdd1";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd1 {
-			label = "nsa320:red:hdd1";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd2 {
-			label = "nsa320:green:hdd2";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd2 {
-			label = "nsa320:red:hdd2";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa320:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa320:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa320:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	/* The following pins are currently not assigned to a driver,
-	   some of them should be configured as inputs.
-	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
-		     &pmx_htp &pmx_vid_b1
-		     &pmx_power_resume_data &pmx_power_resume_clk>; */
-};
-
-&mdio {
-	status = "okay";
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-nsa3x0-common.dtsi b/src/arm/kirkwood-nsa3x0-common.dtsi
deleted file mode 100644
index 2075a2e828f1..000000000000
--- a/src/arm/kirkwood-nsa3x0-common.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "ZyXEL NSA310";
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pmx_usb_power: pmx-usb-power {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_pwr_off: pmx-pwr-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power>;
-		pinctrl-names = "default";
-
-		usb0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x0100000>;
-		read-only;
-	};
-	partition@100000 {
-		label = "uboot_env";
-		reg = <0x0100000 0x0080000>;
-	};
-	partition@180000 {
-		label = "key_store";
-		reg = <0x0180000 0x0080000>;
-	};
-	partition@200000 {
-		label = "info";
-		reg = <0x0200000 0x0080000>;
-	};
-	partition@280000 {
-		label = "etc";
-		reg = <0x0280000 0x0a00000>;
-	};
-	partition@c80000 {
-		label = "kernel_1";
-		reg = <0x0c80000 0x0a00000>;
-	};
-	partition@1680000 {
-		label = "rootfs1";
-		reg = <0x1680000 0x2fc0000>;
-	};
-	partition@4640000 {
-		label = "kernel_2";
-		reg = <0x4640000 0x0a00000>;
-	};
-	partition@5040000 {
-		label = "rootfs2";
-		reg = <0x5040000 0x2fc0000>;
-	};
-};
diff --git a/src/arm/kirkwood-openblocks_a6.dts b/src/arm/kirkwood-openblocks_a6.dts
deleted file mode 100644
index fb9dc227255d..000000000000
--- a/src/arm/kirkwood-openblocks_a6.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Plat'Home OpenBlocksA6";
-	compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <1>;
-			status = "okay";
-		};
-
-		i2c@11100 {
-			status = "okay";
-
-			s35390a: s35390a@30 {
-				compatible = "sii,s35390a";
-				reg = <0x30>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
-			pinctrl-names = "default";
-
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11", "mpp15",
-					"mpp16";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14", "mpp8",
-					"mpp9";
-				marvell,function = "uart1";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_dip_switches: pmx-dip-switches {
-				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
-					       "mpp28", "mpp29", "mpp30", "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_init: pmx-init {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_oc: pmx-usb-oc {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp41", "mpp42", "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-red {
-			label = "obsa6:red:stat";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led-green {
-			label = "obsa6:green:stat";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-yellow {
-			label = "obsa6:yellow:stat";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-        };
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_gpio_init>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Init Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x90000>;
-	};
-
-	partition@90000 {
-		label = "env";
-		reg = <0x90000 0x44000>;
-	};
-
-	partition@d4000 {
-		label = "test";
-		reg = <0xd4000 0x24000>;
-	};
-
-	partition@f4000 {
-		label = "conf";
-		reg = <0xf4000 0x400000>;
-	};
-
-	partition@4f4000 {
-		label = "linux";
-		reg = <0x4f4000 0x1d20000>;
-	};
-
-	partition@2214000 {
-		label = "user";
-		reg = <0x2214000 0x1dec000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-openblocks_a7.dts b/src/arm/kirkwood-openblocks_a7.dts
deleted file mode 100644
index d5e3bc518968..000000000000
--- a/src/arm/kirkwood-openblocks_a7.dts
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Device Tree file for OpenBlocks A7 board
- *
- * Copyright (C) 2013 Free Electrons
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Plat'Home OpenBlocksA7";
-	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <1>;
-			status = "okay";
-		};
-
-		i2c@11100 {
-			status = "okay";
-
-			s24c02: s24c02@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
-			pinctrl-names = "default";
-
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11", "mpp15",
-					"mpp16";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14", "mpp8",
-					"mpp9";
-				marvell,function = "uart1";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_dip_switches: pmx-dip-switches {
-				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
-				marvell,function = "gpio";
-			};
-
-			/*
-			 * Accessible on connector J202. The MPP
-			 * listed below are pin 1-7, pin 8 is unused,
-			 * pin 9 is external reset input and pin 10 is
-			 * ground.
-			 */
-			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
-					       "mpp35", "mpp34", "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_init: pmx-init {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_oc: pmx-usb-oc {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp41", "mpp42", "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-red {
-			label = "obsa7:red:stat";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led-green {
-			label = "obsa7:green:stat";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-yellow {
-			label = "obsa7:yellow:stat";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-        };
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_gpio_init>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Init Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x1c0000>;
-	};
-
-	partition@1c0000 {
-		label = "env";
-		reg = <0x1c0000 0x2c0000>;
-	};
-
-	partition@480000 {
-		label = "test";
-		reg = <0x480000 0x160000>;
-	};
-
-	partition@5e0000 {
-		label = "conf";
-		reg = <0x5e0000 0x540000>;
-	};
-
-	partition@b20000 {
-		label = "linux";
-		reg = <0xb20000 0x3d40000>;
-	};
-
-	partition@4860000 {
-		label = "user";
-		reg = <0x4860000 0xb7a0000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-openrd-base.dts b/src/arm/kirkwood-openrd-base.dts
deleted file mode 100644
index 8af58999606d..000000000000
--- a/src/arm/kirkwood-openrd-base.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Marvell OpenRD Base Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are specific to OpenRD
- * base variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Base";
-	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		serial@12100 {
-			status = "okay";
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-openrd-client.dts b/src/arm/kirkwood-openrd-client.dts
deleted file mode 100644
index 887b9c1fee43..000000000000
--- a/src/arm/kirkwood-openrd-client.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Marvell OpenRD Client Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are specific to OpenRD
- * client variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Client";
-	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			cs42l51: cs42l51@4a {
-				compatible = "cirrus,cs42l51";
-				reg = <0x4a>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&audio0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&cs42l51>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-	ethphy1: ethernet-phy@24 {
-		reg = <24>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
diff --git a/src/arm/kirkwood-openrd-ultimate.dts b/src/arm/kirkwood-openrd-ultimate.dts
deleted file mode 100644
index 9f12f8b53e24..000000000000
--- a/src/arm/kirkwood-openrd-ultimate.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Marvell OpenRD Ultimate Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are specific to OpenRD
- * ultimate variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Ultimate";
-	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			cs42l51: cs42l51@4a {
-				compatible = "cirrus,cs42l51";
-				reg = <0x4a>;
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-openrd.dtsi b/src/arm/kirkwood-openrd.dtsi
deleted file mode 100644
index d3330dadf7ed..000000000000
--- a/src/arm/kirkwood-openrd.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Marvell OpenRD (Base|Client|Ultimate) Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
-			pinctrl-names = "default";
-
-			pmx_select28: pmx-select-uart-sd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_select34: pmx-select-rs232-rs484 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			status = "okay";
-			cd-gpios = <&gpio0 29 9>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@600000 {
-		label = "root";
-		reg = <0x0600000 0x1FA00000>;
-	};
-};
diff --git a/src/arm/kirkwood-rd88f6192.dts b/src/arm/kirkwood-rd88f6192.dts
deleted file mode 100644
index 35a29dee8dd8..000000000000
--- a/src/arm/kirkwood-rd88f6192.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Marvell RD88F6192 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Marvell RD88F6192 reference design";
-	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_usb_power>;
-			pinctrl-names = "default";
-
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p128";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
-	};
-};
-
-&mdio {
-        status = "okay";
-
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
-};
-
-&eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
-};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281-a0.dts b/src/arm/kirkwood-rd88f6281-a0.dts
deleted file mode 100644
index a803bbb70bc8..000000000000
--- a/src/arm/kirkwood-rd88f6281-a0.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Marvell RD88F6181 A0 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions for the board with the A0 variant of
- * the SoC. The ethernet switch does not have a "wan" port.
- */
-
-/dts-v1/;
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
-	model = "Marvell RD88f6281 Reference design, with A0 SoC";
-	compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	dsa@0 {
-		switch@0 {
-			reg = <10 0>;    /* MDIO address 10, switch 0 in tree */
-		};
-	};
-};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281-a1.dts b/src/arm/kirkwood-rd88f6281-a1.dts
deleted file mode 100644
index baeebbf1d8c7..000000000000
--- a/src/arm/kirkwood-rd88f6281-a1.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Marvell RD88F6181 A1 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions for the board with the A1 variant of
- * the SoC. The ethernet switch has a "wan" port.
- */
-
-/dts-v1/;
-
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
-	model = "Marvell RD88f6281 Reference design, with A1 SoC";
-	compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	dsa@0 {
-		switch@0 {
-			reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-		};
-	};
-};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281.dtsi b/src/arm/kirkwood-rd88f6281.dtsi
deleted file mode 100644
index 26cf0e0ccefd..000000000000
--- a/src/arm/kirkwood-rd88f6281.dtsi
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Marvell RD88F6181 Common Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the two
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_sdio_cd>;
-			pinctrl-names = "default";
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-			/* No WP GPIO */
-		};
-	};
-
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0>;
-		dsa,mii-bus = <&ethphy1>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-       };
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x200000>;
-	};
-
-	partition@300000 {
-		label = "data";
-		reg = <0x0300000 0x500000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@ff {
-		reg = <0xff>; /* No PHY attached */
-		speed = <1000>;
-		duple = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-rs212.dts b/src/arm/kirkwood-rs212.dts
deleted file mode 100644
index 3b19f1fd4cac..000000000000
--- a/src/arm/kirkwood-rs212.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS212";
-	compatible = "synology,rs212", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-38 {
-		status = "okay";
-	};
-
-	regulators-hdd-30-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-rs409.dts b/src/arm/kirkwood-rs409.dts
deleted file mode 100644
index 921ca49e85a4..000000000000
--- a/src/arm/kirkwood-rs409.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS409";
-	compatible = "synology,rs409", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-rs411.dts b/src/arm/kirkwood-rs411.dts
deleted file mode 100644
index 02852b0c809f..000000000000
--- a/src/arm/kirkwood-rs411.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS411 RS812";
-	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-sheevaplug-common.dtsi b/src/arm/kirkwood-sheevaplug-common.dtsi
deleted file mode 100644
index 7196c7f3e109..000000000000
--- a/src/arm/kirkwood-sheevaplug-common.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_blue: pmx-led-blue {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_wp: pmx-sdio-wp {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x0500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-sheevaplug-esata.dts b/src/arm/kirkwood-sheevaplug-esata.dts
deleted file mode 100644
index e2b4ea4f9e10..000000000000
--- a/src/arm/kirkwood-sheevaplug-esata.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-
-#include "kirkwood-sheevaplug-common.dtsi"
-
-/ {
-	model = "Globalscale Technologies eSATA SheevaPlug";
-	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_blue>;
-		pinctrl-names = "default";
-
-		health {
-			label = "sheevaplug:blue:health";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-sheevaplug.dts b/src/arm/kirkwood-sheevaplug.dts
deleted file mode 100644
index 82f6abf120fd..000000000000
--- a/src/arm/kirkwood-sheevaplug.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-
-#include "kirkwood-sheevaplug-common.dtsi"
-
-/ {
-	model = "Globalscale Technologies SheevaPlug";
-	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
-		pinctrl-names = "default";
-
-		health {
-			label = "sheevaplug:blue:health";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		misc {
-			label = "sheevaplug:red:misc";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-synology.dtsi b/src/arm/kirkwood-synology.dtsi
deleted file mode 100644
index 811e0971fc58..000000000000
--- a/src/arm/kirkwood-synology.dtsi
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- * Nodes for Marvell 628x Synology devices
- *
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie2: pcie@2,0 {
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_alarmled_12: pmx-alarmled-12 {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_15: pmx-fanctrl-15 {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_16: pmx-fanctrl-16 {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_17: pmx-fanctrl-17 {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_18: pmx-fanalarm-18 {
-				marvell,pins = "mpp18";
-				marvell,function = "gpo";
-			};
-
-			pmx_hddled_20: pmx-hddled-20 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_21: pmx-hddled-21 {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_22: pmx-hddled-22 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_23: pmx-hddled-23 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_24: pmx-hddled-24 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_25: pmx-hddled-25 {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_26: pmx-hddled-26 {
-				marvell,pins = "mpp26";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_27: pmx-hddled-27 {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_28: pmx-hddled-28 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_32: pmx-fanctrl-32 {
-				marvell,pins = "mpp32";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_33: pmx-fanctrl-33 {
-				marvell,pins = "mpp33";
-				marvell,function = "gpo";
-			};
-
-			pmx_fanctrl_34: pmx-fanctrl-34 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_35: pmx-fanalarm-35 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_36: pmx-hddled-36 {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_37: pmx-hddled-37 {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_38: pmx-hddled-38 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_39: pmx-hddled-39 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_40: pmx-hddled-40 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_41: pmx-hddled-41 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_42: pmx-hddled-42 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_43: pmx-hddled-43 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_44: pmx-hddled-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_45: pmx-hddled-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_44: pmx-fanalarm-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_45: pmx-fanalarm-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-		};
-
-		rtc@10300 {
-			status = "disabled";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p80";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@00000000 {
-					reg = <0x00000000 0x00080000>;
-					label = "RedBoot";
-				};
-
-				partition@00080000 {
-					reg = <0x00080000 0x00200000>;
-					label = "zImage";
-				};
-
-				partition@00280000 {
-					reg = <0x00280000 0x00140000>;
-					label = "rd.gz";
-				};
-
-				partition@003c0000 {
-					reg = <0x003c0000 0x00010000>;
-					label = "vendor";
-				};
-
-				partition@003d0000 {
-					reg = <0x003d0000 0x00020000>;
-					label = "RedBoot config";
-				};
-
-				partition@003f0000 {
-					reg = <0x003f0000 0x00010000>;
-					label = "FIS directory";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			rs5c372: rs5c372@32 {
-				status = "disabled";
-				compatible = "ricoh,rs5c372";
-				reg = <0x32>;
-			};
-
-			s35390a: s35390a@30 {
-				status = "disabled";
-				compatible = "ssi,s35390a";
-				reg = <0x30>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		poweroff@12100 {
-			compatible = "synology,power-off";
-			reg = <0x12100 0x100>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-fan-150-32-35 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
-			 &gpio1 1 GPIO_ACTIVE_HIGH
-			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_18>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
-	};
-
-	gpio-fan-100-32-35 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
-			 &gpio1 1 GPIO_ACTIVE_HIGH
-			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-18 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_18>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
-			       &gpio1 12 GPIO_ACTIVE_HIGH
-			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-leds-alarm-12 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_alarmled_12>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:alarm";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-20 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
-			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
-			     &pmx_hddled_26 &pmx_hddled_27>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-green {
-			label = "synology:green:hdd3";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-amber {
-			label = "synology:amber:hdd3";
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-green {
-			label = "synology:green:hdd4";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-amber {
-			label = "synology:amber:hdd4";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-36 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
-			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
-			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
-			     &pmx_hddled_45>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-green {
-			label = "synology:green:hdd3";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-amber {
-			label = "synology:amber:hdd3";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-green {
-			label = "synology:green:hdd4";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-amber {
-			label = "synology:amber:hdd4";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd5-green {
-			label = "synology:green:hdd5";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd5-amber {
-			label = "synology:amber:hdd5";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-38 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators-hdd-29 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-1 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-2 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-4 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
-			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "hdd3power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "hdd4power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-31 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd2_pwr_31>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-34 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
-			     &pmx_hdd4_pwr_45>;
-		pinctrl-names = "default";
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "hdd3power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "hdd4power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		reg = <9>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "disabled";
-
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-t5325.dts b/src/arm/kirkwood-t5325.dts
deleted file mode 100644
index 610ec0f95858..000000000000
--- a/src/arm/kirkwood-t5325.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Device Tree file for HP t5325 Thin Client"
- *
- * Copyright (C) 2014
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "HP t5325 Thin Client";
-	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
-			pinctrl-names = "default";
-
-			pmx_button_power: pmx-button_power {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-			pmx_led: pmx-led {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
-				marvell,function = "spi";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_i2s: pmx-i2s {
-				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
-					       "mpp43";
-				marvell,function = "audio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p80";
-				spi-max-frequency = <86000000>;
-				reg = <0>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-
-				partition@1 {
-					reg = <0x80000 0x40000>;
-					label = "SSD firmware";
-				};
-
-				partition@2 {
-					reg = <0xc0000 0x10000>;
-					label = "u-boot env";
-				};
-
-				partition@3 {
-					reg = <0xd0000 0x10000>;
-					label = "permanent u-boot env";
-				};
-
-				partition@4 {
-					reg = <0xd0000 0x10000>;
-					label = "permanent u-boot env";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			alc5621: alc5621@1a {
-				compatible = "realtek,alc5621";
-				reg = <0x1a>;
-				#sound-dai-cells = <0>;
-				add-ctrl = <0x3700>;
-				jack-det-ctrl = <0x4810>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		audio: audio-controller@a0000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_sata_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB-SATA Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_power>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Speaker", "SPKOUT",
-			"Speaker", "SPKOUTN",
-			"MIC1", "Mic Jack",
-			"MIC2", "Mic Jack";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker",
-			"Microphone", "Mic Jack";
-
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&audio>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&alc5621>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-topkick.dts b/src/arm/kirkwood-topkick.dts
deleted file mode 100644
index f5c8c0dd41dc..000000000000
--- a/src/arm/kirkwood-topkick.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
-	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			/*
-			 * Switch positions
-			 *
-			 *     /-SW_LEFT(2)
-			 *     |
-			 *     |   /-SW_IDLE
-			 *     |   |
-			 *     |   |   /-SW_RIGHT
-			 *     |   |   |
-			 * PS [L] [I] [R] LEDS
-			 */
-			pinctrl-0 = <&pmx_sw_left &pmx_sw_right
-				     &pmx_sw_idle &pmx_sw_left2>;
-			pinctrl-names = "default";
-
-			pmx_led_disk_yellow: pmx-led-disk-yellow {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_blue: pmx-led-sys-blue {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_wifi_green: pmx-led-wifi-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_left: pmx-sw-left {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_right: pmx-sw-right {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_idle: pmx-sw-idle {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_left2: pmx-sw-left2 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		i2c@11000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		/*
-		 * GPIO LED layout
-		 *
-		 *       /-SYS_LED(2)
-		 *       |
-		 *       |   /-DISK_LED
-		 *       |   |
-		 *       |   |   /-WLAN_LED(2)
-		 *       |   |   |
-		 * [SW] [*] [*] [*]
-		 */
-
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
-			     &pmx_led_sys_blue &pmx_led_wifi_green
-			     &pmx_led_wifi_yellow>;
-		pinctrl-names = "default";
-
-		disk {
-			label = "topkick:yellow:disk";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
-		};
-		system2 {
-			label = "topkick:red:system";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		system {
-			label = "topkick:blue:system";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		wifi {
-			label = "topkick:green:wifi";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "topkick:yellow:wifi";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_pwr_enable>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-	};
-
-	partition@180000 {
-		label = "u-boot env";
-		reg = <0x0180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "uInitrd";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "rootfs";
-		reg = <0x1800000 0xe800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-ts219-6281.dts b/src/arm/kirkwood-ts219-6281.dts
deleted file mode 100644
index 9767d73f3857..000000000000
--- a/src/arm/kirkwood-ts219-6281.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-ts219.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
-			pinctrl-names = "default";
-
-			pmx_ram_size: pmx-ram-size {
-				/* RAM: 0: 256 MB, 1: 512 MB */
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_board_id: pmx-board-id {
-				/* 0: TS-11x, 1: TS-21x */
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ts219-6282.dts b/src/arm/kirkwood-ts219-6282.dts
deleted file mode 100644
index bfc1a32d4e42..000000000000
--- a/src/arm/kirkwood-ts219-6282.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-ts219.dtsi"
-
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
-			pinctrl-names = "default";
-
-			pmx_ram_size: pmx-ram-size {
-				/* RAM: 0: 256 MB, 1: 512 MB */
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_board_id: pmx-board-id {
-				/* 0: TS-11x, 1: TS-21x */
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-ts219.dtsi b/src/arm/kirkwood-ts219.dtsi
deleted file mode 100644
index df7f15276575..000000000000
--- a/src/arm/kirkwood-ts219.dtsi
+++ /dev/null
@@ -1,107 +0,0 @@
-/ {
-	model = "QNAP TS219 family";
-	compatible = "qnap,ts219", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			s35390a: s35390a@30 {
-				compatible = "s35390a";
-				reg = <0x30>;
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-		serial@12100 {
-			status = "okay";
-		};
-		poweroff@12100 {
-			compatible = "qnap,power-off";
-			reg = <0x12000 0x100>;
-			clocks = <&gate_clk 7>;
-		};
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p128";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0000000 {
-					reg = <0x00000000 0x00080000>;
-					label = "U-Boot";
-				};
-
-				partition@00200000 {
-					reg = <0x00200000 0x00200000>;
-					label = "Kernel";
-				};
-
-				partition@00400000 {
-					reg = <0x00400000 0x00900000>;
-					label = "RootFS1";
-				};
-				partition@00d00000 {
-					reg = <0x00d00000 0x00300000>;
-					label = "RootFS2";
-				};
-				partition@00040000 {
-					reg = <0x00080000 0x00040000>;
-					label = "U-Boot Config";
-				};
-				partition@000c0000 {
-					reg = <0x000c0000 0x00140000>;
-					label = "NAS Config";
-				};
-			};
-		};
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy {
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-ts419-6281.dts b/src/arm/kirkwood-ts419-6281.dts
deleted file mode 100644
index aa22aa862857..000000000000
--- a/src/arm/kirkwood-ts419-6281.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Device Tree file for QNAP TS41X with 6281 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-&ethphy0 { reg = <8>; };
-&ethphy1 { reg = <0>; };
diff --git a/src/arm/kirkwood-ts419-6282.dts b/src/arm/kirkwood-ts419-6282.dts
deleted file mode 100644
index d7512d4cdced..000000000000
--- a/src/arm/kirkwood-ts419-6282.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Device Tree file for QNAP TS41X with 6282 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
-&ethphy1 { reg = <1>; };
diff --git a/src/arm/kirkwood-ts419.dtsi b/src/arm/kirkwood-ts419.dtsi
deleted file mode 100644
index 30ab93bfb1e4..000000000000
--- a/src/arm/kirkwood-ts419.dtsi
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Device Tree include file for QNAP TS41X
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/ {
-	model = "QNAP TS419 family";
-	compatible = "qnap,ts419", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			/*
-			 * JP1 indicates if an LCD module is installed
-			 * on the serial port (0), or if the port is used
-			 * as a console (1).
-			 */
-			pmx_jumper_jp1: pmx-jumper_jp1 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood.dtsi b/src/arm/kirkwood.dtsi
deleted file mode 100644
index afc640cd80c5..000000000000
--- a/src/arm/kirkwood.dtsi
+++ /dev/null
@@ -1,383 +0,0 @@
-/include/ "skeleton.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	compatible = "marvell,kirkwood";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,feroceon";
-			reg = <0>;
-			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
-			clock-names = "cpu_clk", "ddrclk", "powersave";
-		};
-	};
-
-	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
-	};
-
-	mbus {
-		compatible = "marvell,kirkwood-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/* If a board file needs to change this ranges it must replace it completely */
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
-			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
-			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
-			  >;
-		controller = <&mbusc>;
-		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
-		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
-
-		cesa: crypto@0301 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
-			      <MBUS_ID(0x03, 0x01) 0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
-		};
-
-		nand: nand@012f {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "marvell,orion-nand";
-			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-	};
-
-	ocp@f1000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x0100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		pinctrl: pin-controller@10000 {
-			/* set compatible property in SoC file */
-			reg = <0x10000 0x20>;
-
-			pmx_ge1: pmx-ge1 {
-				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
-					       "mpp24", "mpp25", "mpp26", "mpp27",
-					       "mpp30", "mpp31", "mpp32", "mpp33";
-				marvell,function = "ge1";
-			};
-
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-					       "mpp4", "mpp5", "mpp18", "mpp19";
-				marvell,function = "nand";
-			};
-
-			/*
-			 * Default SPI0 pinctrl setting with CSn on mpp0,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
-
-			/*
-			 * Default UART pinctrl setting without RTS/CTS,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
-		};
-
-		core_clk: core-clocks@10030 {
-			compatible = "marvell,kirkwood-core-clock";
-			reg = <0x10030 0x4>;
-			#clock-cells = <1>;
-		};
-
-		spi0: spi@10600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <23>;
-			reg = <0x10600 0x28>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		gpio0: gpio@10100 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10100 0x40>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <35>, <36>, <37>, <38>;
-			clocks = <&gate_clk 7>;
-		};
-
-		gpio1: gpio@10140 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10140 0x40>;
-			ngpios = <18>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <39>, <40>, <41>;
-			clocks = <&gate_clk 7>;
-		};
-
-		i2c0: i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <29>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_twsi0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <33>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		uart1: serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <34>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		mbusc: mbus-controller@20000 {
-			compatible = "marvell,mbus-controller";
-			reg = <0x20000 0x80>, <0x1500 0x20>;
-		};
-
-		sysc: system-controller@20000 {
-			compatible = "marvell,orion-system-controller";
-			reg = <0x20000 0x120>;
-		};
-
-		bridge_intc: bridge-interrupt-ctrl@20110 {
-			compatible = "marvell,orion-bridge-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20110 0x8>;
-			interrupts = <1>;
-			marvell,#interrupts = <6>;
-		};
-
-		gate_clk: clock-gating-control@2011c {
-			compatible = "marvell,kirkwood-gating-clock";
-			reg = <0x2011c 0x4>;
-			clocks = <&core_clk 0>;
-			#clock-cells = <1>;
-		};
-
-		l2: l2-cache@20128 {
-			compatible = "marvell,kirkwood-cache";
-			reg = <0x20128 0x4>;
-		};
-
-		intc: main-interrupt-ctrl@20200 {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20200 0x10>, <0x20210 0x10>;
-		};
-
-		timer: timer@20300 {
-			compatible = "marvell,orion-timer";
-			reg = <0x20300 0x20>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <1>, <2>;
-			clocks = <&core_clk 0>;
-		};
-
-		wdt: watchdog-timer@20300 {
-			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>, <0x20108 0x4>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <3>;
-			clocks = <&gate_clk 7>;
-			status = "okay";
-		};
-
-		usb0: ehci@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <19>;
-			clocks = <&gate_clk 3>;
-			status = "okay";
-		};
-
-		dma0: xor@60800 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60800 0x100
-			       0x60A00 0x100>;
-			status = "okay";
-			clocks = <&gate_clk 8>;
-
-			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			};
-			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
-			};
-		};
-
-		dma1: xor@60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60B00 0x100>;
-			status = "okay";
-			clocks = <&gate_clk 16>;
-
-			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			};
-			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
-			};
-		};
-
-		eth0: ethernet-controller@72000 {
-			compatible = "marvell,kirkwood-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72000 0x4000>;
-			clocks = <&gate_clk 0>;
-			marvell,tx-checksum-limit = <1600>;
-			status = "disabled";
-
-			ethernet0-port@0 {
-				compatible = "marvell,kirkwood-eth-port";
-				reg = <0>;
-				interrupts = <11>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
-			};
-		};
-
-		mdio: mdio-bus@72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <46>;
-			clocks = <&gate_clk 0>;
-			status = "disabled";
-
-			/* add phy nodes in board file */
-		};
-
-		eth1: ethernet-controller@76000 {
-			compatible = "marvell,kirkwood-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x76000 0x4000>;
-			clocks = <&gate_clk 19>;
-			marvell,tx-checksum-limit = <1600>;
-			pinctrl-0 = <&pmx_ge1>;
-			pinctrl-names = "default";
-			status = "disabled";
-
-			ethernet1-port@0 {
-				compatible = "marvell,kirkwood-eth-port";
-				reg = <0>;
-				interrupts = <15>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
-			};
-		};
-
-		sata_phy0: sata-phy@82000 {
-			compatible = "marvell,mvebu-sata-phy";
-			reg = <0x82000 0x0334>;
-			clocks = <&gate_clk 14>;
-			clock-names = "sata";
-			#phy-cells = <0>;
-			status = "ok";
-		};
-
-		sata_phy1: sata-phy@84000 {
-			compatible = "marvell,mvebu-sata-phy";
-			reg = <0x84000 0x0334>;
-			clocks = <&gate_clk 15>;
-			clock-names = "sata";
-			#phy-cells = <0>;
-			status = "ok";
-		};
-
-		audio0: audio-controller@a0000 {
-			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <0>;
-			reg = <0xa0000 0x2210>;
-			interrupts = <24>;
-			clocks = <&gate_clk 9>;
-			clock-names = "internal";
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/lpc32xx.dtsi b/src/arm/lpc32xx.dtsi
deleted file mode 100644
index 3abebb75fc57..000000000000
--- a/src/arm/lpc32xx.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * NXP LPC32xx SoC
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "nxp,lpc3220";
-	interrupt-parent = <&mic>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x20000000 0x20000000 0x30000000>;
-
-		/*
-		 * Enable either SLC or MLC
-		 */
-		slc: flash@20020000 {
-			compatible = "nxp,lpc3220-slc";
-			reg = <0x20020000 0x1000>;
-			status = "disabled";
-		};
-
-		mlc: flash@200a8000 {
-			compatible = "nxp,lpc3220-mlc";
-			reg = <0x200a8000 0x11000>;
-			interrupts = <11 0>;
-			status = "disabled";
-		};
-
-		dma@31000000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0x31000000 0x1000>;
-			interrupts = <0x1c 0>;
-		};
-
-		/*
-		 * Enable either ohci or usbd (gadget)!
-		 */
-		ohci@31020000 {
-			compatible = "nxp,ohci-nxp", "usb-ohci";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3b 0>;
-			status = "disabled";
-		};
-
-		usbd@31020000 {
-			compatible = "nxp,lpc3220-udc";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
-			status = "disabled";
-		};
-
-		clcd@31040000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x31040000 0x1000>;
-			interrupts = <0x0e 0>;
-			status = "disabled";
-		};
-
-		mac: ethernet@31060000 {
-			compatible = "nxp,lpc-eth";
-			reg = <0x31060000 0x1000>;
-			interrupts = <0x1d 0>;
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			ssp0: ssp@20084000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x20084000 0x1000>;
-				interrupts = <0x14 0>;
-			};
-
-			spi1: spi@20088000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20088000 0x1000>;
-			};
-
-			ssp1: ssp@2008c000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x2008c000 0x1000>;
-				interrupts = <0x15 0>;
-			};
-
-			spi2: spi@20090000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20090000 0x1000>;
-			};
-
-			i2s0: i2s@20094000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x20094000 0x1000>;
-			};
-
-			sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				reg = <0x20098000 0x1000>;
-				interrupts = <0x0f 0>, <0x0d 0>;
-				status = "disabled";
-			};
-
-			i2s1: i2s@2009C000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x2009C000 0x1000>;
-			};
-
-			/* UART5 first since it is the default console, ttyS0 */
-			uart5: serial@40090000 {
-				/* actually, ns16550a w/ 64 byte fifos! */
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40090000 0x1000>;
-				interrupts = <9 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart3: serial@40080000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40080000 0x1000>;
-				interrupts = <7 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart4: serial@40088000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40088000 0x1000>;
-				interrupts = <8 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart6: serial@40098000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40098000 0x1000>;
-				interrupts = <10 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@400A0000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400A0000 0x100>;
-				interrupts = <0x33 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
-
-			i2c2: i2c@400A8000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400A8000 0x100>;
-				interrupts = <0x32 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
-
-			mpwm: mpwm@400E8000 {
-				compatible = "nxp,lpc3220-motor-pwm";
-				reg = <0x400E8000 0x78>;
-				status = "disabled";
-				#pwm-cells = <2>;
-			};
-
-			i2cusb: i2c@31020300 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x31020300 0x100>;
-				interrupts = <0x3f 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
-		};
-
-		fab {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			/*
-			 * MIC Interrupt controller includes:
-			 *   MIC @40008000
-			 *   SIC1 @4000C000
-			 *   SIC2 @40010000
-			 */
-			mic: interrupt-controller@40008000 {
-				compatible = "nxp,lpc3220-mic";
-				interrupt-controller;
-				reg = <0x40008000 0xC000>;
-				#interrupt-cells = <2>;
-			};
-
-			uart1: serial@40014000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40014000 0x1000>;
-				interrupts = <26 0>;
-				status = "disabled";
-			};
-
-			uart2: serial@40018000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40018000 0x1000>;
-				interrupts = <25 0>;
-				status = "disabled";
-			};
-
-			uart7: serial@4001c000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x4001c000 0x1000>;
-				interrupts = <24 0>;
-				status = "disabled";
-			};
-
-			rtc@40024000 {
-				compatible = "nxp,lpc3220-rtc";
-				reg = <0x40024000 0x1000>;
-				interrupts = <0x34 0>;
-			};
-
-			gpio: gpio@40028000 {
-				compatible = "nxp,lpc3220-gpio";
-				reg = <0x40028000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <3>; /* bank, pin, flags */
-			};
-
-			watchdog@4003C000 {
-				compatible = "nxp,pnx4008-wdt";
-				reg = <0x4003C000 0x1000>;
-			};
-
-			/*
-			 * TSC vs. ADC: Since those two share the same
-			 * hardware, you need to choose from one of the
-			 * following two and do 'status = "okay";' for one of
-			 * them
-			 */
-
-			adc@40048000 {
-				compatible = "nxp,lpc3220-adc";
-				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
-				status = "disabled";
-			};
-
-			tsc@40048000 {
-				compatible = "nxp,lpc3220-tsc";
-				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
-				status = "disabled";
-			};
-
-			key@40050000 {
-				compatible = "nxp,lpc3220-key";
-				reg = <0x40050000 0x1000>;
-				interrupts = <54 0>;
-				status = "disabled";
-			};
-
-			pwm: pwm@4005C000 {
-				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005C000 0x8>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/marco-evb.dts b/src/arm/marco-evb.dts
deleted file mode 100644
index 5130aeacfca5..000000000000
--- a/src/arm/marco-evb.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * DTS file for CSR SiRFmarco Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "marco.dtsi"
-
-/ {
-	model = "CSR SiRFmarco Evaluation Board";
-	compatible = "sirf,marco-cb", "sirf,marco";
-
-	memory {
-		reg = <0x40000000 0x60000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart1: uart@cc060000 {
-				status = "okay";
-			};
-			uart2: uart@cc070000 {
-				status = "okay";
-			};
-			i2c0: i2c@cc0e0000 {
-			      status = "okay";
-			      fpga-cpld@4d {
-				      compatible = "sirf,fpga-cpld";
-				      reg = <0x4d>;
-			      };
-			};
-			spi1: spi@cc170000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-				spi@0 {
-					compatible = "spidev";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-			pci-iobg {
-				sd0: sdhci@cd000000 {
-					bus-width = <8>;
-					status = "okay";
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/marco.dtsi b/src/arm/marco.dtsi
deleted file mode 100644
index fb354225740a..000000000000
--- a/src/arm/marco.dtsi
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * DTS file for CSR SiRFmarco SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,marco";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0xa0000000>;
-
-		l2-cache-controller@c0030000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xc0030000 0x1000>;
-			interrupts = <0 59 0>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0x40000000 0x80000000>;
-		};
-
-		gic: interrupt-controller@c0011000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xc0011000 0x1000>,
-			      <0xc0010100 0x0100>;
-		};
-
-		rstc-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc2000000 0xc2000000 0x1000000>;
-
-			rstc: reset-controller@c2000000 {
-				compatible = "sirf,marco-rstc";
-				reg = <0xc2000000 0x10000>;
-				#reset-cells = <1>;
-			};
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc3000000 0xc3000000 0x1000000>;
-
-			clock-controller@c3000000 {
-				compatible = "sirf,marco-clkc";
-				reg = <0xc3000000 0x1000>;
-				interrupts = <0 3 0>;
-			};
-
-			rsc-controller@c3010000 {
-				compatible = "sirf,marco-rsc";
-				reg = <0xc3010000 0x1000>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc4000000 0xc4000000 0x1000000>;
-
-			memory-controller@c4000000 {
-				compatible = "sirf,marco-memc";
-				reg = <0xc4000000 0x10000>;
-				interrupts = <0 27 0>;
-			};
-		};
-
-		disp-iobg0 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc5000000 0xc5000000 0x1000000>;
-
-			display0@c5000000 {
-				compatible = "sirf,marco-lcd";
-				reg = <0xc5000000 0x10000>;
-				interrupts = <0 30 0>;
-			};
-
-			vpp0@c5010000 {
-				compatible = "sirf,marco-vpp";
-				reg = <0xc5010000 0x10000>;
-				interrupts = <0 31 0>;
-			};
-		};
-
-		disp-iobg1 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc6000000 0xc6000000 0x1000000>;
-
-			display1@c6000000 {
-				compatible = "sirf,marco-lcd";
-				reg = <0xc6000000 0x10000>;
-				interrupts = <0 62 0>;
-			};
-
-			vpp1@c6010000 {
-				compatible = "sirf,marco-vpp";
-				reg = <0xc6010000 0x10000>;
-				interrupts = <0 63 0>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc8000000 0xc8000000 0x1000000>;
-
-			graphics@c8000000 {
-				compatible = "powervr,sgx540";
-				reg = <0xc8000000 0x1000000>;
-				interrupts = <0 6 0>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc9000000 0xc9000000 0x1000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,marco-video-codec";
-				reg = <0xc9000000 0x1000000>;
-				interrupts = <0 5 0>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xca000000 0xca000000 0x2000000>;
-
-			dspif@ca000000 {
-				compatible = "sirf,marco-dspif";
-				reg = <0xca000000 0x10000>;
-				interrupts = <0 9 0>;
-			};
-
-			gps@ca010000 {
-				compatible = "sirf,marco-gps";
-				reg = <0xca010000 0x10000>;
-				interrupts = <0 7 0>;
-			};
-
-			dsp@cb000000 {
-				compatible = "sirf,marco-dsp";
-				reg = <0xcb000000 0x1000000>;
-				interrupts = <0 8 0>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xcc000000 0xcc000000 0x2000000>;
-
-			timer@cc020000 {
-				compatible = "sirf,marco-tick";
-				reg = <0xcc020000 0x1000>;
-				interrupts = <0 0 0>,
-					   <0 1 0>,
-					   <0 2 0>,
-					   <0 49 0>,
-					   <0 50 0>,
-					   <0 51 0>;
-			};
-
-			nand@cc030000 {
-				compatible = "sirf,marco-nand";
-				reg = <0xcc030000 0x10000>;
-				interrupts = <0 41 0>;
-			};
-
-			audio@cc040000 {
-				compatible = "sirf,marco-audio";
-				reg = <0xcc040000 0x10000>;
-				interrupts = <0 35 0>;
-			};
-
-			uart0: uart@cc050000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc050000 0x1000>;
-				interrupts = <0 17 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			uart1: uart@cc060000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc060000 0x1000>;
-				interrupts = <0 18 0>;
-				fifosize = <32>;
-				status = "disabled";
-			};
-
-			uart2: uart@cc070000 {
-				cell-index = <2>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc070000 0x1000>;
-				interrupts = <0 19 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			uart3: uart@cc190000 {
-				cell-index = <3>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc190000 0x1000>;
-				interrupts = <0 66 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			uart4: uart@cc1a0000 {
-				cell-index = <4>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc1a0000 0x1000>;
-				interrupts = <0 69 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			usp0: usp@cc080000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-usp";
-				reg = <0xcc080000 0x10000>;
-				interrupts = <0 20 0>;
-				status = "disabled";
-			};
-
-			usp1: usp@cc090000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-usp";
-				reg = <0xcc090000 0x10000>;
-				interrupts = <0 21 0>;
-				status = "disabled";
-			};
-
-			usp2: usp@cc0a0000 {
-				cell-index = <2>;
-				compatible = "sirf,marco-usp";
-				reg = <0xcc0a0000 0x10000>;
-				interrupts = <0 22 0>;
-				status = "disabled";
-			};
-
-			dmac0: dma-controller@cc0b0000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-dmac";
-				reg = <0xcc0b0000 0x10000>;
-				interrupts = <0 12 0>;
-			};
-
-			dmac1: dma-controller@cc160000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-dmac";
-				reg = <0xcc160000 0x10000>;
-				interrupts = <0 13 0>;
-			};
-
-			vip@cc0c0000 {
-				compatible = "sirf,marco-vip";
-				reg = <0xcc0c0000 0x10000>;
-			};
-
-			spi0: spi@cc0d0000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-spi";
-				reg = <0xcc0d0000 0x10000>;
-				interrupts = <0 15 0>;
-				sirf,spi-num-chipselects = <1>;
-				cs-gpios = <&gpio 0 0>;
-				sirf,spi-dma-rx-channel = <25>;
-				sirf,spi-dma-tx-channel = <20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi1: spi@cc170000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-spi";
-				reg = <0xcc170000 0x10000>;
-				interrupts = <0 16 0>;
-				sirf,spi-num-chipselects = <1>;
-				cs-gpios = <&gpio 0 0>;
-				sirf,spi-dma-rx-channel = <12>;
-				sirf,spi-dma-tx-channel = <13>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@cc0e0000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-i2c";
-				reg = <0xcc0e0000 0x10000>;
-				interrupts = <0 24 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@cc0f0000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-i2c";
-				reg = <0xcc0f0000 0x10000>;
-				interrupts = <0 25 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			tsc@cc110000 {
-				compatible = "sirf,marco-tsc";
-				reg = <0xcc110000 0x10000>;
-				interrupts = <0 33 0>;
-			};
-
-			gpio: pinctrl@cc120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,marco-pinctrl";
-				reg = <0xcc120000 0x10000>;
-				interrupts = <0 43 0>,
-					   <0 44 0>,
-					   <0 45 0>,
-					   <0 46 0>,
-					   <0 47 0>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0_0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0_1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0_2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0_0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0_0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart1_pins_a: uart1_0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2_0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2_1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0_0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1_0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0_0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1_0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-				pwm0_pins_a: pwm0_0 {
-				        pwm {
-				                sirf,pins = "pwm0grp";
-				                sirf,function = "pwm0";
-				        };
-				};
-				pwm1_pins_a: pwm1_0 {
-				        pwm {
-				                sirf,pins = "pwm1grp";
-				                sirf,function = "pwm1";
-				        };
-				};
-				pwm2_pins_a: pwm2_0 {
-				        pwm {
-				                sirf,pins = "pwm2grp";
-				                sirf,function = "pwm2";
-				        };
-				};
-				pwm3_pins_a: pwm3_0 {
-				        pwm {
-				                sirf,pins = "pwm3grp";
-				                sirf,function = "pwm3";
-				        };
-				};
-				gps_pins_a: gps_0 {
-				        gps {
-				                sirf,pins = "gpsgrp";
-				                sirf,function = "gps";
-				        };
-				};
-				vip_pins_a: vip_0 {
-				        vip {
-				                sirf,pins = "vipgrp";
-				                sirf,function = "vip";
-				        };
-				};
-				sdmmc0_pins_a: sdmmc0_0 {
-				        sdmmc0 {
-				                sirf,pins = "sdmmc0grp";
-				                sirf,function = "sdmmc0";
-				        };
-				};
-				sdmmc1_pins_a: sdmmc1_0 {
-				        sdmmc1 {
-				                sirf,pins = "sdmmc1grp";
-				                sirf,function = "sdmmc1";
-				        };
-				};
-				sdmmc2_pins_a: sdmmc2_0 {
-				        sdmmc2 {
-				                sirf,pins = "sdmmc2grp";
-				                sirf,function = "sdmmc2";
-				        };
-				};
-				sdmmc3_pins_a: sdmmc3_0 {
-				        sdmmc3 {
-				                sirf,pins = "sdmmc3grp";
-				                sirf,function = "sdmmc3";
-				        };
-				};
-				sdmmc4_pins_a: sdmmc4_0 {
-				        sdmmc4 {
-				                sirf,pins = "sdmmc4grp";
-				                sirf,function = "sdmmc4";
-				        };
-				};
-				sdmmc5_pins_a: sdmmc5_0 {
-				        sdmmc5 {
-				                sirf,pins = "sdmmc5grp";
-				                sirf,function = "sdmmc5";
-				        };
-				};
-				i2s_pins_a: i2s_0 {
-				        i2s {
-				                sirf,pins = "i2sgrp";
-				                sirf,function = "i2s";
-				        };
-				};
-				ac97_pins_a: ac97_0 {
-				        ac97 {
-				                sirf,pins = "ac97grp";
-				                sirf,function = "ac97";
-				        };
-				};
-				nand_pins_a: nand_0 {
-				        nand {
-				                sirf,pins = "nandgrp";
-				                sirf,function = "nand";
-				        };
-				};
-				usp0_pins_a: usp0_0 {
-				        usp0 {
-				                sirf,pins = "usp0grp";
-				                sirf,function = "usp0";
-				        };
-				};
-				usp1_pins_a: usp1_0 {
-				        usp1 {
-				                sirf,pins = "usp1grp";
-				                sirf,function = "usp1";
-				        };
-				};
-				usp2_pins_a: usp2_0 {
-				        usp2 {
-				                sirf,pins = "usp2grp";
-				                sirf,function = "usp2";
-				        };
-				};
-				usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 {
-				        usb0_utmi_drvbus {
-				                sirf,pins = "usb0_utmi_drvbusgrp";
-				                sirf,function = "usb0_utmi_drvbus";
-				        };
-				};
-				usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 {
-				        usb1_utmi_drvbus {
-				                sirf,pins = "usb1_utmi_drvbusgrp";
-				                sirf,function = "usb1_utmi_drvbus";
-				        };
-				};
-				warm_rst_pins_a: warm_rst_0 {
-				        warm_rst {
-				                sirf,pins = "warm_rstgrp";
-				                sirf,function = "warm_rst";
-				        };
-				};
-				pulse_count_pins_a: pulse_count_0 {
-				        pulse_count {
-				                sirf,pins = "pulse_countgrp";
-				                sirf,function = "pulse_count";
-				        };
-				};
-				cko0_rst_pins_a: cko0_rst_0 {
-				        cko0_rst {
-				                sirf,pins = "cko0_rstgrp";
-				                sirf,function = "cko0_rst";
-				        };
-				};
-				cko1_rst_pins_a: cko1_rst_0 {
-				        cko1_rst {
-				                sirf,pins = "cko1_rstgrp";
-				                sirf,function = "cko1_rst";
-				        };
-				};
-			};
-
-			pwm@cc130000 {
-				compatible = "sirf,marco-pwm";
-				reg = <0xcc130000 0x10000>;
-			};
-
-			efusesys@cc140000 {
-				compatible = "sirf,marco-efuse";
-				reg = <0xcc140000 0x10000>;
-			};
-
-			pulsec@cc150000 {
-				compatible = "sirf,marco-pulsec";
-				reg = <0xcc150000 0x10000>;
-				interrupts = <0 48 0>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,marco-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0xcd000000 0xcd000000 0x1000000>;
-
-				sd0: sdhci@cd000000 {
-					cell-index = <0>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd000000 0x100000>;
-					interrupts = <0 38 0>;
-					status = "disabled";
-				};
-
-				sd1: sdhci@cd100000 {
-					cell-index = <1>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd100000 0x100000>;
-					interrupts = <0 38 0>;
-					status = "disabled";
-				};
-
-				sd2: sdhci@cd200000 {
-					cell-index = <2>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd200000 0x100000>;
-					interrupts = <0 23 0>;
-					status = "disabled";
-				};
-
-				sd3: sdhci@cd300000 {
-					cell-index = <3>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd300000 0x100000>;
-					interrupts = <0 23 0>;
-					status = "disabled";
-				};
-
-				sd4: sdhci@cd400000 {
-					cell-index = <4>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd400000 0x100000>;
-					interrupts = <0 39 0>;
-					status = "disabled";
-				};
-
-				sd5: sdhci@cd500000 {
-					cell-index = <5>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd500000 0x100000>;
-					interrupts = <0 39 0>;
-					status = "disabled";
-				};
-
-				pci-copy@cd900000 {
-					compatible = "sirf,marco-pcicp";
-					reg = <0xcd900000 0x100000>;
-					interrupts = <0 40 0>;
-				};
-
-				rom-interface@cda00000 {
-					compatible = "sirf,marco-romif";
-					reg = <0xcda00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xc1000000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,marco-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <0 55 0>,
-					   <0 56 0>,
-					   <0 57 0>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,marco-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <0 52 0>,
-					   <0 53 0>,
-					   <0 54 0>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,marco-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <0 32 0>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xce000000 0xce000000 0x1000000>;
-
-			usb0: usb@ce000000 {
-				compatible = "chipidea,ci13611a-marco";
-				reg = <0xce000000 0x10000>;
-				interrupts = <0 10 0>;
-			};
-
-			usb1: usb@ce010000 {
-				compatible = "chipidea,ci13611a-marco";
-				reg = <0xce010000 0x10000>;
-				interrupts = <0 11 0>;
-			};
-
-			security@ce020000 {
-				compatible = "sirf,marco-security";
-				reg = <0xce020000 0x10000>;
-				interrupts = <0 42 0>;
-			};
-		};
-
-		can-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xd0000000 0xd0000000 0x1000000>;
-
-			can0: can@d0000000 {
-				compatible = "sirf,marco-can";
-				reg = <0xd0000000 0x10000>;
-			};
-
-			can1: can@d0010000 {
-				compatible = "sirf,marco-can";
-				reg = <0xd0010000 0x10000>;
-			};
-		};
-
-		lvds-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xd1000000 0xd1000000 0x1000000>;
-
-			lvds@d1000000 {
-				compatible = "sirf,marco-lvds";
-				reg = <0xd1000000 0x10000>;
-				interrupts = <0 64 0>;
-			};
-		};
-	};
-};
diff --git a/src/arm/mmp2-brownstone.dts b/src/arm/mmp2-brownstone.dts
deleted file mode 100644
index 7f70a39459f6..000000000000
--- a/src/arm/mmp2-brownstone.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-/include/ "mmp2.dtsi"
-
-/ {
-	model = "Marvell MMP2 Brownstone Development Board";
-	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
-
-	chosen {
-		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart3: uart@d4018000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-				pmic: max8925@3c {
-					compatible = "maxium,max8925";
-					reg = <0x3c>;
-					interrupts = <1>;
-					interrupt-parent = <&intcmux4>;
-					interrupt-controller;
-					#interrupt-cells = <1>;
-					maxim,tsc-irq = <0>;
-
-					regulators {
-						SDV1 {
-							regulator-min-microvolt = <637500>;
-							regulator-max-microvolt = <1425000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2225000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV3 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO1 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO3 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO4 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO5 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO6 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO7 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO8 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO9 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO10 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-						};
-						LDO11 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO12 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO13 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO14 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO15 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO16 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO17 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO18 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO19 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO20 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-					};
-					backlight {
-						maxim,max8925-dual-string = <0>;
-					};
-					charger {
-						batt-detect = <0>;
-						topoff-threshold = <1>;
-						fast-charge = <7>;
-						no-temp-support = <0>;
-						no-insert-detect = <0>;
-					};
-				};
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/mmp2.dtsi b/src/arm/mmp2.dtsi
deleted file mode 100644
index 4e8b08c628c7..000000000000
--- a/src/arm/mmp2.dtsi
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		L2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0x3>;
-		};
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp2-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-			intcmux4: interrupt-controller@d4282150 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <4>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x150 0x4>, <0x168 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux5: interrupt-controller@d4282154 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <5>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x154 0x4>, <0x16c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-				mrvl,clr-mfp-irq = <1>;
-			};
-
-			intcmux9: interrupt-controller@d4282180 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <9>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x180 0x4>, <0x17c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <3>;
-			};
-
-			intcmux17: interrupt-controller@d4282158 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <17>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x158 0x4>, <0x170 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <5>;
-			};
-
-			intcmux35: interrupt-controller@d428215c {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <35>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x15c 0x4>, <0x174 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <15>;
-			};
-
-			intcmux51: interrupt-controller@d4282160 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <51>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x160 0x4>, <0x178 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux55: interrupt-controller@d4282188 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <55>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x188 0x4>, <0x184 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			uart1: uart@d4030000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4030000 0x1000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			uart4: uart@d4016000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4016000 0x1000>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp2-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-
-				gcb4: gpio@d4019104 {
-					reg = <0xd4019104 0x4>;
-				};
-
-				gcb5: gpio@d4019108 {
-					reg = <0xd4019108 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <1 0>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				interrupt-parent = <&intcmux5>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/moxart-uc7112lx.dts b/src/arm/moxart-uc7112lx.dts
deleted file mode 100644
index 10d088df0c35..000000000000
--- a/src/arm/moxart-uc7112lx.dts
+++ /dev/null
@@ -1,117 +0,0 @@
-/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
- *
- * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-/include/ "moxart.dtsi"
-
-/ {
-	model = "MOXA UC-7112-LX";
-	compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	clocks {
-		ref12: ref12M {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-	};
-
-	flash@80000000,0 {
-		compatible = "numonyx,js28f128", "cfi-flash";
-		reg = <0x80000000 0x1000000>;
-		bank-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x40000>;
-		};
-		partition@40000 {
-			label = "linux kernel";
-			reg = <0x40000 0x1C0000>;
-		};
-		partition@200000 {
-			label = "root filesystem";
-			reg = <0x200000 0x800000>;
-		};
-		partition@a00000 {
-			label = "user filesystem";
-			reg = <0xa00000 0x600000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		user-led {
-			label = "ready-led";
-			gpios = <&gpio 27 0x1>;
-			default-state = "on";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio_keys_polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <500>;
-		button@25 {
-			label = "GPIO Reset";
-			linux,code = <116>;
-			gpios = <&gpio 25 1>;
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
-	};
-};
-
-&clk_pll {
-	clocks = <&ref12>;
-};
-
-&sdhci {
-	status = "okay";
-};
-
-&mdio0 {
-	status = "okay";
-
-	ethphy0: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&mac0 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/moxart.dtsi b/src/arm/moxart.dtsi
deleted file mode 100644
index 1fd27ed65a01..000000000000
--- a/src/arm/moxart.dtsi
+++ /dev/null
@@ -1,148 +0,0 @@
-/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
- *
- * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "moxa,moxart";
-	model = "MOXART";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "faraday,fa526";
-			reg = <0>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x90000000 0x10000000>;
-		ranges;
-
-		intc: interrupt-controller@98800000 {
-			compatible = "moxa,moxart-ic";
-			reg = <0x98800000 0x38>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-mask = <0x00080000>;
-		};
-
-		clk_pll: clk_pll@98100000 {
-			compatible = "moxa,moxart-pll-clock";
-			#clock-cells = <0>;
-			reg = <0x98100000 0x34>;
-		};
-
-		clk_apb: clk_apb@98100000 {
-			compatible = "moxa,moxart-apb-clock";
-			#clock-cells = <0>;
-			reg = <0x98100000 0x34>;
-			clocks = <&clk_pll>;
-		};
-
-		timer: timer@98400000 {
-			compatible = "moxa,moxart-timer";
-			reg = <0x98400000 0x42>;
-			interrupts = <19 1>;
-			clocks = <&clk_apb>;
-		};
-
-		gpio: gpio@98700000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			compatible = "moxa,moxart-gpio";
-			reg = <0x98700000 0xC>;
-		};
-
-		rtc: rtc {
-			compatible = "moxa,moxart-rtc";
-			gpio-rtc-sclk = <&gpio 5 0>;
-			gpio-rtc-data = <&gpio 6 0>;
-			gpio-rtc-reset = <&gpio 7 0>;
-		};
-
-		dma: dma@90500000 {
-			compatible = "moxa,moxart-dma";
-			reg = <0x90500080 0x40>;
-			interrupts = <24 0>;
-			#dma-cells = <1>;
-		};
-
-		watchdog: watchdog@98500000 {
-			compatible = "moxa,moxart-watchdog";
-			reg = <0x98500000 0x10>;
-			clocks = <&clk_apb>;
-		};
-
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
-			reg = <0x98e00000 0x5C>;
-			interrupts = <5 0>;
-			clocks = <&clk_apb>;
-			dmas =  <&dma 5>,
-				<&dma 5>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mdio0: mdio@90900090 {
-			compatible = "moxa,moxart-mdio";
-			reg = <0x90900090 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mdio1: mdio@92000090 {
-			compatible = "moxa,moxart-mdio";
-			reg = <0x92000090 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac0: mac@90900000 {
-			compatible = "moxa,moxart-mac";
-			reg = <0x90900000 0x90>;
-			interrupts = <25 0>;
-			phy-handle = <&ethphy0>;
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		mac1: mac@92000000 {
-			compatible = "moxa,moxart-mac";
-			reg = <0x92000000 0x90>;
-			interrupts = <27 0>;
-			phy-handle = <&ethphy1>;
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		uart0: uart@98200000 {
-			compatible = "ns16550a";
-			reg = <0x98200000 0x20>;
-			interrupts = <31 8>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <14745600>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/mt6589-aquaris5.dts b/src/arm/mt6589-aquaris5.dts
deleted file mode 100644
index 443b4467de15..000000000000
--- a/src/arm/mt6589-aquaris5.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2014 MundoReader S.L.
- * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt6589.dtsi"
-
-/ {
-	model = "bq Aquaris5";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-};
diff --git a/src/arm/mt6589.dtsi b/src/arm/mt6589.dtsi
deleted file mode 100644
index d0297a051549..000000000000
--- a/src/arm/mt6589.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (c) 2014 MundoReader S.L.
- * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "mediatek,mt6589";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		system_clk: dummy13m {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-			#clock-cells = <0>;
-		};
-
-		rtc_clk: dummy32k {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		timer: timer@10008000 {
-			compatible = "mediatek,mt6577-timer";
-			reg = <0x10008000 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&system_clk>, <&rtc_clk>;
-			clock-names = "system-clk", "rtc-clk";
-		};
-
-		gic: interrupt-controller@10212000 {
-			compatible = "arm,cortex-a15-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x10211000 0x1000>,
-			      <0x10212000 0x1000>,
-			      <0x10214000 0x2000>,
-			      <0x10216000 0x2000>;
-		};
-	};
-};
diff --git a/src/arm/mxs-pinfunc.h b/src/arm/mxs-pinfunc.h
deleted file mode 100644
index c6da987b20cb..000000000000
--- a/src/arm/mxs-pinfunc.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
-#define __DT_BINDINGS_MXS_PINCTRL_H__
-
-/* fsl,drive-strength property */
-#define MXS_DRIVE_4mA		0
-#define MXS_DRIVE_8mA		1
-#define MXS_DRIVE_12mA		2
-#define MXS_DRIVE_16mA		3
-
-/* fsl,voltage property */
-#define MXS_VOLTAGE_LOW		0
-#define MXS_VOLTAGE_HIGH	1
-
-/* fsl,pull-up property */
-#define MXS_PULL_DISABLE	0
-#define MXS_PULL_ENABLE		1
-
-#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/src/arm/nspire-classic.dtsi b/src/arm/nspire-classic.dtsi
deleted file mode 100644
index 9565199bce7a..000000000000
--- a/src/arm/nspire-classic.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-classic.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	lcd-type = "classic";
-};
-
-&fast_timer {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
-};
-
-&uart {
-	compatible = "ns16550";
-	reg-shift = <2>;
-	reg-io-width = <4>;
-	clocks = <&apb_pclk>;
-	no-loopback-test;
-};
-
-&timer0 {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
-};
-
-&timer1 {
-	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
-};
-
-&keypad {
-	active-low;
-
-};
-
-&base_clk {
-	compatible = "lsi,nspire-classic-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-classic-ahb-divider";
-};
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x2000000>; /* 32 MB */
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@DC000000 {
-			compatible = "lsi,zevio-intc";
-			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/src/arm/nspire-clp.dts b/src/arm/nspire-clp.dts
deleted file mode 100644
index fa5a044656de..000000000000
--- a/src/arm/nspire-clp.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-clp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00020039
-	0x0004002c 	0x00050034 	0x00060015
-	0x0007000b 	0x0008002d 	0x01000033
-	0x0101004e 	0x01020011 	0x01030004
-	0x0104002f 	0x01050003 	0x01060016
-	0x01070002 	0x01080014 	0x02000062
-	0x0201000c 	0x0202001f 	0x02030007
-	0x02040013 	0x02050006 	0x02060010
-	0x02070005 	0x02080019 	0x03000027
-	0x03010037 	0x03020018 	0x0303000a
-	0x03040031 	0x03050009 	0x03060032
-	0x03070008 	0x03080026 	0x04000028
-	0x04010035 	0x04020025 	0x04040024
-	0x04060017 	0x04080023 	0x05000028
-	0x05020022 	0x0503001b 	0x05040021
-	0x0505001a 	0x05060012 	0x0507006f
-	0x05080020 	0x0509002a 	0x0601001c
-	0x0602002e 	0x06030068 	0x06040030
-	0x0605006d 	0x0606001e 	0x06070001
-	0x0608002b 	0x0609000f 	0x07000067
-	0x0702006a 	0x0704006c 	0x07060069
-	0x0707000e 	0x0708001d 	0x070a000d
-	>;
-};
-
-/ {
-	model = "TI-NSPIRE Clickpad";
-	compatible = "ti,nspire-clp";
-};
diff --git a/src/arm/nspire-cx.dts b/src/arm/nspire-cx.dts
deleted file mode 100644
index 375b924f60d8..000000000000
--- a/src/arm/nspire-cx.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-cx.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	lcd-type = "cx";
-};
-
-&fast_timer {
-	/* compatible = "arm,sp804", "arm,primecell"; */
-};
-
-&uart {
-	compatible = "arm,pl011", "arm,primecell";
-
-	clocks = <&uart_clk>, <&apb_pclk>;
-	clock-names = "uart_clk", "apb_pclk";
-};
-
-&timer0 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&timer1 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&base_clk {
-	compatible = "lsi,nspire-cx-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-cx-ahb-divider";
-};
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE CX";
-	compatible = "ti,nspire-cx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x4000000>; /* 64 MB */
-	};
-
-	uart_clk: uart_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@DC000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		apb@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			i2c@90050000 {
-				compatible = "snps,designware-i2c";
-				reg = <0x90050000 0x1000>;
-				interrupts = <20>;
-			};
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/src/arm/nspire-tp.dts b/src/arm/nspire-tp.dts
deleted file mode 100644
index 621391ce6ed6..000000000000
--- a/src/arm/nspire-tp.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-tp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE Touchpad";
-	compatible = "ti,nspire-tp";
-};
diff --git a/src/arm/nspire.dtsi b/src/arm/nspire.dtsi
deleted file mode 100644
index a22ffe633b49..000000000000
--- a/src/arm/nspire.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire.dtsi
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	bootrom: bootrom@00000000 {
-		reg = <0x00000000 0x80000>;
-	};
-
-	sram: sram@A4000000 {
-		device = "memory";
-		reg = <0xA4000000 0x20000>;
-	};
-
-	timer_clk: timer_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	base_clk: base_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-	};
-
-	ahb_clk: ahb_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-		clocks = <&base_clk>;
-	};
-
-	apb_pclk: apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&ahb_clk>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi: spi@A9000000 {
-			reg = <0xA9000000 0x1000>;
-		};
-
-		usb0: usb@B0000000 {
-			reg = <0xB0000000 0x1000>;
-			interrupts = <8>;
-		};
-
-		usb1: usb@B4000000 {
-			reg = <0xB4000000 0x1000>;
-			interrupts = <9>;
-			status = "disabled";
-		};
-
-		lcd: lcd@C0000000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
-			interrupts = <21>;
-
-			clocks = <&apb_pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		adc: adc@C4000000 {
-			reg = <0xC4000000 0x1000>;
-			interrupts = <11>;
-		};
-
-		tdes: crypto@C8010000 {
-			reg = <0xC8010000 0x1000>;
-		};
-
-		sha256: crypto@CC000000 {
-			reg = <0xCC000000 0x1000>;
-		};
-
-		apb@90000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clock-ranges;
-			ranges;
-
-			gpio: gpio@90000000 {
-				reg = <0x90000000 0x1000>;
-				interrupts = <7>;
-			};
-
-			fast_timer: timer@90010000 {
-				reg = <0x90010000 0x1000>;
-				interrupts = <17>;
-			};
-
-			uart: serial@90020000 {
-				reg = <0x90020000 0x1000>;
-				interrupts = <1>;
-			};
-
-			timer0: timer@900C0000 {
-				reg = <0x900C0000 0x1000>;
-
-				clocks = <&timer_clk>;
-			};
-
-			timer1: timer@900D0000 {
-				reg = <0x900D0000 0x1000>;
-				interrupts = <19>;
-
-				clocks = <&timer_clk>;
-			};
-
-			watchdog: watchdog@90060000 {
-				compatible = "arm,amba-primecell";
-				reg = <0x90060000 0x1000>;
-				interrupts = <3>;
-			};
-
-			rtc: rtc@90090000 {
-				reg = <0x90090000 0x1000>;
-				interrupts = <4>;
-			};
-
-			misc: misc@900A0000 {
-				reg = <0x900A0000 0x1000>;
-			};
-
-			pwr: pwr@900B0000 {
-				reg = <0x900B0000 0x1000>;
-				interrupts = <15>;
-			};
-
-			keypad: input@900E0000 {
-				compatible = "ti,nspire-keypad";
-				reg = <0x900E0000 0x1000>;
-				interrupts = <16>;
-
-				scan-interval = <1000>;
-				row-delay = <200>;
-
-				clocks = <&apb_pclk>;
-			};
-
-			contrast: contrast@900F0000 {
-				reg = <0x900F0000 0x1000>;
-			};
-
-			led: led@90110000 {
-				reg = <0x90110000 0x1000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/omap-gpmc-smsc911x.dtsi b/src/arm/omap-gpmc-smsc911x.dtsi
deleted file mode 100644
index 521c587acaee..000000000000
--- a/src/arm/omap-gpmc-smsc911x.dtsi
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Common file for GPMC connected smsc911x on omaps
- *
- * Note that the board specifc DTS file needs to specify
- * ranges, pinctrl, reg, interrupt parent and interrupts.
- */
-
-/ {
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&gpmc {
-	ethernet@gpmc {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <1>;
-		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/src/arm/omap-gpmc-smsc9221.dtsi b/src/arm/omap-gpmc-smsc9221.dtsi
deleted file mode 100644
index 73e272fadc20..000000000000
--- a/src/arm/omap-gpmc-smsc9221.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Common file for GPMC connected smsc9221 on omaps
- *
- * Compared to smsc911x, smsc9221 (and others like smsc9217
- * or smsc 9218) has faster timings, leading to higher
- * bandwidth.
- *
- * Note that the board specifc DTS file needs to specify
- * ranges, pinctrl, reg, interrupt parent and interrupts.
- */
-
-/ {
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&gpmc {
-	ethernet@gpmc {
-		compatible = "smsc,lan9221","smsc,lan9115";
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <42>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <42>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <36>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <54>;
-		gpmc,access-ns = <36>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <18>;
-		gpmc,wr-access-ns = <42>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/src/arm/omap-zoom-common.dtsi b/src/arm/omap-zoom-common.dtsi
deleted file mode 100644
index 68221fab978d..000000000000
--- a/src/arm/omap-zoom-common.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Common features on the Zoom debug board
- */
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <3 0 0x10000000 0x00000400>,
-		 <7 0 0x2c000000 0x01000000>;
-
-	/*
-	 * Four port TL16CP754C serial port on GPMC,
-	 * they probably share the same GPIO IRQ
-	 * REVISIT: Add timing support from slls644g.pdf
-	 */
-	uart@3,0 {
-		compatible = "ns16550a";
-		reg = <3 0 0x100>;
-		bank-width = <2>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
-		clock-frequency = <1843200>;
-		current-speed = <115200>;
-	};
-
-	ethernet@gpmc {
-		reg = <7 0 0xff>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
-	};
-};
diff --git a/src/arm/omap2.dtsi b/src/arm/omap2.dtsi
deleted file mode 100644
index 8f8c07da4ac1..000000000000
--- a/src/arm/omap2.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Device Tree Source for OMAP2 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1136jf-s";
-			device_type = "cpu";
-		};
-	};
-
-	pmu {
-		compatible = "arm,arm1136-pmu";
-		interrupts = <3>;
-	};
-
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap2-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		aes: aes@480a6000 {
-			compatible = "ti,omap2-aes";
-			ti,hwmods = "aes";
-			reg = <0x480a6000 0x50>;
-			dmas = <&sdma 9 &sdma 10>;
-			dma-names = "tx", "rx";
-		};
-
-		hdq1w: 1w@480b2000 {
-			compatible = "ti,omap2420-1w";
-			ti,hwmods = "hdq1w";
-			reg = <0x480b2000 0x1000>;
-			interrupts = <58>;
-		};
-
-		intc: interrupt-controller@1 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <96>;
-			reg = <0x480FE000 0x1000>;
-		};
-
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
-			ti,hwmods = "dma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <64>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap2-i2c";
-			ti,hwmods = "i2c1";
-			reg = <0x48070000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap2-i2c";
-			ti,hwmods = "i2c2";
-			reg = <0x48072000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
-		};
-
-		mcspi1: mcspi@48098000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi1";
-			reg = <0x48098000 0x100>;
-			interrupts = <65>;
-			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
-				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: mcspi@4809a000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi2";
-			reg = <0x4809a000 0x100>;
-			interrupts = <66>;
-			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		rng: rng@480a0000 {
-			compatible = "ti,omap2-rng";
-			ti,hwmods = "rng";
-			reg = <0x480a0000 0x50>;
-			interrupts = <52>;
-		};
-
-		sham: sham@480a4000 {
-			compatible = "ti,omap2-sham";
-			ti,hwmods = "sham";
-			reg = <0x480a4000 0x64>;
-			interrupts = <51>;
-			dmas = <&sdma 13>;
-			dma-names = "rx";
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart1";
-			reg = <0x4806a000 0x2000>;
-			interrupts = <72>;
-			dmas = <&sdma 49 &sdma 50>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart2";
-			reg = <0x4806c000 0x400>;
-			interrupts = <73>;
-			dmas = <&sdma 51 &sdma 52>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@4806e000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart3";
-			reg = <0x4806e000 0x400>;
-			interrupts = <74>;
-			dmas = <&sdma 53 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		timer2: timer@4802a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4802a000 0x400>;
-			interrupts = <38>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48078000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48078000 0x400>;
-			interrupts = <39>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@4807a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807a000 0x400>;
-			interrupts = <40>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@4807c000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807c000 0x400>;
-			interrupts = <41>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4807e000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807e000 0x400>;
-			interrupts = <42>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@48080000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48080000 0x400>;
-			interrupts = <43>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@48082000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48082000 0x400>;
-			interrupts = <44>;
-			ti,hwmods = "timer8";
-			ti,timer-dsp;
-		};
-
-		timer9: timer@48084000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48084000 0x400>;
-			interrupts = <45>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48086000 0x400>;
-			interrupts = <46>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48088000 0x400>;
-			interrupts = <47>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer12: timer@4808a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4808a000 0x400>;
-			interrupts = <48>;
-			ti,hwmods = "timer12";
-			ti,timer-pwm;
-		};
-
-		dss: dss@48050000 {
-			compatible = "ti,omap2-dss";
-			reg = <0x48050000 0x400>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@48050400 {
-				compatible = "ti,omap2-dispc";
-				reg = <0x48050400 0x400>;
-				interrupts = <25>;
-				ti,hwmods = "dss_dispc";
-			};
-
-			rfbi: encoder@48050800 {
-				compatible = "ti,omap2-rfbi";
-				reg = <0x48050800 0x400>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-			};
-
-			venc: encoder@48050c00 {
-				compatible = "ti,omap2-venc";
-				reg = <0x48050c00 0x400>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-			};
-		};
-	};
-};
diff --git a/src/arm/omap2420-clocks.dtsi b/src/arm/omap2420-clocks.dtsi
deleted file mode 100644
index ce8c742d7e92..000000000000
--- a/src/arm/omap2420-clocks.dtsi
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Device Tree Source for OMAP2420 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&prcm_clocks {
-	sys_clkout2_src_gate: sys_clkout2_src_gate {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout2_src_mux: sys_clkout2_src_mux {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout2_src: sys_clkout2_src {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
-	};
-
-	sys_clkout2: sys_clkout2 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkout2_src>;
-		ti,bit-shift = <11>;
-		ti,max-div = <64>;
-		reg = <0x0070>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gate_ick: dsp_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <1>;
-		reg = <0x0810>;
-	};
-
-	dsp_div_ick: dsp_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0840>;
-		ti,index-starts-at-one;
-	};
-
-	dsp_ick: dsp_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
-	};
-
-	iva1_gate_ifck: iva1_gate_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0800>;
-	};
-
-	iva1_div_ifck: iva1_div_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0840>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
-	};
-
-	iva1_ifck: iva1_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
-	};
-
-	iva1_ifck_div: iva1_ifck_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&iva1_ifck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	iva1_mpu_int_ifck: iva1_mpu_int_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&iva1_ifck_div>;
-		ti,bit-shift = <8>;
-		reg = <0x0800>;
-	};
-
-	wdt3_ick: wdt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <28>;
-		reg = <0x0210>;
-	};
-
-	wdt3_fck: wdt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <28>;
-		reg = <0x0200>;
-	};
-
-	mmc_ick: mmc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x0210>;
-	};
-
-	mmc_fck: mmc_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x0200>;
-	};
-
-	eac_ick: eac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0210>;
-	};
-
-	eac_fck: eac_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0200>;
-	};
-
-	i2c1_fck: i2c1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0200>;
-	};
-
-	i2c2_fck: i2c2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0200>;
-	};
-
-	vlynq_ick: vlynq_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0210>;
-	};
-
-	vlynq_gate_fck: vlynq_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0200>;
-	};
-
-	core_d18_ck: core_d18_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <18>;
-	};
-
-	vlynq_mux_fck: vlynq_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0240>;
-	};
-
-	vlynq_fck: vlynq_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
-	};
-};
-
-&prcm_clockdomains {
-	gfx_clkdm: gfx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_ick>;
-	};
-
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
-			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
-			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
-	};
-
-	iva1_clkdm: iva1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&iva1_mpu_int_ifck>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_ick>, <&dss_54m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
-			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
-			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
-			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
-			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
-			 <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
-			 <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
-			 <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
-			 <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
-			 <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
-			 <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
-			 <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
-			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
-			 <&pka_ick>;
-	};
-};
-
-&func_96m_ck {
-	compatible = "fixed-factor-clock";
-	clocks = <&apll96_ck>;
-	clock-mult = <1>;
-	clock-div = <1>;
-};
-
-&dsp_div_fck {
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
-};
-
-&ssi_ssr_sst_div_fck {
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-};
diff --git a/src/arm/omap2420-h4.dts b/src/arm/omap2420-h4.dts
deleted file mode 100644
index 34cdecb4fdda..000000000000
--- a/src/arm/omap2420-h4.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap2420.dtsi"
-
-/ {
-	model = "TI OMAP2420 H4 board";
-	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>; /* 64 MB */
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x08000000 0x04000000>;
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name= "intel,ge28f256l18b85";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x04000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <20>;
-		gpmc,adv-rd-off-ns = <50>;
-		gpmc,adv-wr-off-ns = <50>;
-		gpmc,oe-on-ns = <60>;
-		gpmc,oe-off-ns = <120>;
-		gpmc,we-on-ns = <60>;
-		gpmc,we-off-ns = <120>;
-		gpmc,rd-cycle-ns = <170>;
-		gpmc,wr-cycle-ns = <170>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0 0x20000>;
-		};
-		partition@20000 {
-			label = "params";
-			reg = <0x20000 0x20000>;
-		};
-		partition@40000 {
-			label = "kernel";
-			reg = <0x40000 0x200000>;
-		};
-		partition@240000 {
-			label = "file-system";
-			reg = <0x240000 0x3dc0000>;
-		};
-	};
-};
diff --git a/src/arm/omap2420-n800.dts b/src/arm/omap2420-n800.dts
deleted file mode 100644
index d8c1b423606a..000000000000
--- a/src/arm/omap2420-n800.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N800";
-	compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/src/arm/omap2420-n810-wimax.dts b/src/arm/omap2420-n810-wimax.dts
deleted file mode 100644
index 6b25b0359ac9..000000000000
--- a/src/arm/omap2420-n810-wimax.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N810 WiMax";
-	compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/src/arm/omap2420-n810.dts b/src/arm/omap2420-n810.dts
deleted file mode 100644
index 21baec154b78..000000000000
--- a/src/arm/omap2420-n810.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N810";
-	compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/src/arm/omap2420-n8x0-common.dtsi b/src/arm/omap2420-n8x0-common.dtsi
deleted file mode 100644
index 89608b206519..000000000000
--- a/src/arm/omap2420-n8x0-common.dtsi
+++ /dev/null
@@ -1,99 +0,0 @@
-#include "omap2420.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-
-	ocp {
-		i2c@0 {
-			compatible = "i2c-cbus-gpio";
-			gpios = <&gpio3 2 0 /* gpio66 clk */
-				 &gpio3 1 0 /* gpio65 dat */
-				 &gpio3 0 0 /* gpio64 sel */
-				>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			retu_mfd: retu@1 {
-				compatible = "retu-mfd";
-				interrupt-parent = <&gpio4>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-				reg = <0x1>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x10000000>;
-
-	/* gpio-irq for dma: 26 */
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x10000000>;
-
-		gpmc,sync-read;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <127>;
-		gpmc,cs-wr-off-ns = <109>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <18>;
-		gpmc,oe-on-ns = <27>;
-		gpmc,oe-off-ns = <127>;
-		gpmc,we-on-ns = <27>;
-		gpmc,we-off-ns = <72>;
-		gpmc,rd-cycle-ns = <145>;
-		gpmc,wr-cycle-ns = <136>;
-		gpmc,access-ns = <118>;
-		gpmc,page-burst-access-ns = <27>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <9>;
-		gpmc,sync-clk-ps = <27000>;
-
-		/* MTD partition table corresponding to old board-n8x0 file. */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00020000>;
-			read-only;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00020000 0x00060000>;
-		};
-		partition@2 {
-			label = "kernel";
-			reg = <0x00080000 0x00200000>;
-		};
-		partition@3 {
-			label = "initfs";
-			reg = <0x00280000 0x00400000>;
-		};
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00680000 0x0f980000>;
-		};
-		partition@5 {
-			label = "omap2-onenand";
-			reg = <0x00000000 0x10000000>;
-		};
-	};
-};
diff --git a/src/arm/omap2420.dtsi b/src/arm/omap2420.dtsi
deleted file mode 100644
index 9be3c1266378..000000000000
--- a/src/arm/omap2420.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Device Tree Source for OMAP2420 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap2.dtsi"
-
-/ {
-	compatible = "ti,omap2420", "ti,omap2";
-
-	ocp {
-		prcm: prcm@48008000 {
-			compatible = "ti,omap2-prcm";
-			reg = <0x48008000 0x1000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@48000000 {
-			compatible = "ti,omap2-scrm";
-			reg = <0x48000000 0x1000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@48004000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x48004000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap2420_pmx: pinmux@48000030 {
-			compatible = "ti,omap2420-padconf", "pinctrl-single";
-			reg = <0x48000030 0x0113>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
-		gpio1: gpio@48018000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x48018000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio2: gpio@4801a000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801a000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio3: gpio@4801c000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801c000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio4: gpio@4801e000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801e000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpmc: gpmc@6800a000 {
-			compatible = "ti,omap2420-gpmc";
-			reg = <0x6800a000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap2420-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <59>, /* TX interrupt */
-				     <60>; /* RX interrupt */
-			interrupt-names = "tx", "rx";
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@48076000 {
-			compatible = "ti,omap2420-mcbsp";
-			reg = <0x48076000 0xff>;
-			reg-names = "mpu";
-			interrupts = <62>, /* TX interrupt */
-				     <63>; /* RX interrupt */
-			interrupt-names = "tx", "rx";
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		msdi1: mmc@4809c000 {
-			compatible = "ti,omap2420-mmc";
-			ti,hwmods = "msdi1";
-			reg = <0x4809c000 0x80>;
-			interrupts = <83>;
-			dmas = <&sdma 61 &sdma 62>;
-			dma-names = "tx", "rx";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>, <34>;
-			interrupt-names = "dsp", "iva";
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <6>;
-		};
-
-		timer1: timer@48028000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48028000 0x400>;
-			interrupts = <37>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		wd_timer2: wdt@48022000 {
-			compatible = "ti,omap2-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x48022000 0x80>;
-		};
-	};
-};
-
-&i2c1 {
-	compatible = "ti,omap2420-i2c";
-};
-
-&i2c2 {
-	compatible = "ti,omap2420-i2c";
-};
-
-/include/ "omap24xx-clocks.dtsi"
-/include/ "omap2420-clocks.dtsi"
diff --git a/src/arm/omap2430-clocks.dtsi b/src/arm/omap2430-clocks.dtsi
deleted file mode 100644
index 805f75df1cf2..000000000000
--- a/src/arm/omap2430-clocks.dtsi
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Device Tree Source for OMAP2430 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&scrm_clocks {
-	mcbsp3_mux_fck: mcbsp3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		reg = <0x02e8>;
-	};
-
-	mcbsp3_fck: mcbsp3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
-	};
-
-	mcbsp4_mux_fck: mcbsp4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x02e8>;
-	};
-
-	mcbsp4_fck: mcbsp4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
-	};
-
-	mcbsp5_mux_fck: mcbsp5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x02e8>;
-	};
-
-	mcbsp5_fck: mcbsp5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
-	};
-};
-
-&prcm_clocks {
-	iva2_1_gate_ick: iva2_1_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0800>;
-	};
-
-	iva2_1_div_ick: iva2_1_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0840>;
-		ti,index-starts-at-one;
-	};
-
-	iva2_1_ick: iva2_1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
-	};
-
-	mdm_gate_ick: mdm_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c10>;
-	};
-
-	mdm_div_ick: mdm_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		reg = <0x0c40>;
-		ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
-	};
-
-	mdm_ick: mdm_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
-	};
-
-	mdm_osc_ck: mdm_osc_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&osc_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0c00>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0214>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <3>;
-		reg = <0x0204>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0214>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x0204>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0214>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <5>;
-		reg = <0x0204>;
-	};
-
-	mcspi3_ick: mcspi3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0214>;
-	};
-
-	mcspi3_fck: mcspi3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0204>;
-	};
-
-	icr_ick: icr_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0410>;
-	};
-
-	i2chs1_fck: i2chs1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2430-interface-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0204>;
-	};
-
-	i2chs2_fck: i2chs2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2430-interface-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0204>;
-	};
-
-	usbhs_ick: usbhs_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0214>;
-	};
-
-	mmchs1_ick: mmchs1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0214>;
-	};
-
-	mmchs1_fck: mmchs1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0204>;
-	};
-
-	mmchs2_ick: mmchs2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0214>;
-	};
-
-	mmchs2_fck: mmchs2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0204>;
-	};
-
-	gpio5_ick: gpio5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0214>;
-	};
-
-	gpio5_fck: gpio5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0204>;
-	};
-
-	mdm_intc_ick: mdm_intc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0214>;
-	};
-
-	mmchsdb1_fck: mmchsdb1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0204>;
-	};
-
-	mmchsdb2_fck: mmchsdb2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0204>;
-	};
-};
-
-&prcm_clockdomains {
-	gfx_clkdm: gfx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_ick>;
-	};
-
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
-			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
-			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
-			 <&icr_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_ick>, <&dss_54m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
-			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
-			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
-			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
-			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
-			 <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
-			 <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
-			 <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
-			 <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
-			 <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
-			 <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
-			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
-			 <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
-			 <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
-			 <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
-			 <&mmchsdb2_fck>;
-	};
-
-	mdm_clkdm: mdm_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mdm_osc_ck>;
-	};
-};
-
-&func_96m_ck {
-	compatible = "ti,mux-clock";
-	clocks = <&apll96_ck>, <&alt_ck>;
-	ti,bit-shift = <4>;
-	reg = <0x0540>;
-};
-
-&dsp_div_fck {
-	ti,max-div = <4>;
-	ti,index-starts-at-one;
-};
-
-&ssi_ssr_sst_div_fck {
-	ti,max-div = <5>;
-	ti,index-starts-at-one;
-};
diff --git a/src/arm/omap2430-sdp.dts b/src/arm/omap2430-sdp.dts
deleted file mode 100644
index 2c90d29b4cad..000000000000
--- a/src/arm/omap2430-sdp.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap2430.dtsi"
-
-/ {
-	model = "TI OMAP2430 SDP";
-	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	};
-};
-
-#include "twl4030.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-&gpmc {
-	ranges = <5 0 0x08000000 0x01000000>;
-	ethernet@gpmc {
-		compatible = "smsc,lan91c94";
-		interrupt-parent = <&gpio5>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;	/* gpio149 */
-		reg = <5 0x300 0xf>;
-		bank-width = <2>;
-		gpmc,mux-add-data;
-        };
-};
-
diff --git a/src/arm/omap2430.dtsi b/src/arm/omap2430.dtsi
deleted file mode 100644
index 1a00f15d9096..000000000000
--- a/src/arm/omap2430.dtsi
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Device Tree Source for OMAP243x SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap2.dtsi"
-
-/ {
-	compatible = "ti,omap2430", "ti,omap2";
-
-	ocp {
-		prcm: prcm@49006000 {
-			compatible = "ti,omap2-prcm";
-			reg = <0x49006000 0x1000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@49002000 {
-			compatible = "ti,omap2-scrm";
-			reg = <0x49002000 0x1000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@49020000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x49020000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap2430_pmx: pinmux@49002030 {
-			compatible = "ti,omap2430-padconf", "pinctrl-single";
-			reg = <0x49002030 0x0154>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
-		omap2_scm_general: tisyscon@49002270 {
-			compatible = "syscon";
-			reg = <0x49002270 0x240>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x230 0x4>;
-			syscon = <&omap2_scm_general>;
-			pbias_mmc_reg: pbias_mmc_omap2430 {
-				regulator-name = "pbias_mmc_omap2430";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		gpio1: gpio@4900c000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4900c000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio2: gpio@4900e000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4900e000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio3: gpio@49010000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x49010000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio4: gpio@49012000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x49012000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio5: gpio@480b6000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x480b6000 0x200>;
-			interrupts = <33>;
-			ti,hwmods = "gpio5";
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpmc: gpmc@6e000000 {
-			compatible = "ti,omap2430-gpmc";
-			reg = <0x6e000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <64>, /* OCP compliant interrupt */
-				     <59>, /* TX interrupt */
-				     <60>, /* RX interrupt */
-				     <61>; /* RX overflow interrupt */
-			interrupt-names = "common", "tx", "rx", "rx_overflow";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@48076000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48076000 0xff>;
-			reg-names = "mpu";
-			interrupts = <16>, /* OCP compliant interrupt */
-				     <62>, /* TX interrupt */
-				     <63>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@4808c000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x4808c000 0xff>;
-			reg-names = "mpu";
-			interrupts = <17>, /* OCP compliant interrupt */
-				     <89>, /* TX interrupt */
-				     <90>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@4808e000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x4808e000 0xff>;
-			reg-names = "mpu";
-			interrupts = <18>, /* OCP compliant interrupt */
-				     <54>, /* TX interrupt */
-				     <55>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp5: mcbsp@48096000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48096000 0xff>;
-			reg-names = "mpu";
-			interrupts = <19>, /* OCP compliant interrupt */
-				     <81>, /* TX interrupt */
-				     <82>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp5";
-			dmas = <&sdma 21>,
-			       <&sdma 22>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap2-hsmmc";
-			reg = <0x4809c000 0x200>;
-			interrupts = <83>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap2-hsmmc";
-			reg = <0x480b4000 0x200>;
-			interrupts = <86>;
-			ti,hwmods = "mmc2";
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <6>;
-		};
-
-		timer1: timer@49018000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x49018000 0x400>;
-			interrupts = <37>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		mcspi3: mcspi@480b8000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi3";
-			reg = <0x480b8000 0x100>;
-			interrupts = <91>;
-			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		usb_otg_hs: usb_otg_hs@480ac000 {
-			compatible = "ti,omap2-musb";
-			ti,hwmods = "usb_otg_hs";
-			reg = <0x480ac000 0x1000>;
-			interrupts = <93>;
-		};
-
-		wd_timer2: wdt@49016000 {
-			compatible = "ti,omap2-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x49016000 0x80>;
-		};
-	};
-};
-
-&i2c1 {
-	compatible = "ti,omap2430-i2c";
-};
-
-&i2c2 {
-	compatible = "ti,omap2430-i2c";
-};
-
-/include/ "omap24xx-clocks.dtsi"
-/include/ "omap2430-clocks.dtsi"
diff --git a/src/arm/omap24xx-clocks.dtsi b/src/arm/omap24xx-clocks.dtsi
deleted file mode 100644
index a1365ca926eb..000000000000
--- a/src/arm/omap24xx-clocks.dtsi
+++ /dev/null
@@ -1,1244 +0,0 @@
-/*
- * Device Tree Source for OMAP24xx clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	mcbsp1_mux_fck: mcbsp1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x0274>;
-	};
-
-	mcbsp1_fck: mcbsp1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
-	};
-
-	mcbsp2_mux_fck: mcbsp2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x0274>;
-	};
-
-	mcbsp2_fck: mcbsp2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
-	};
-};
-
-&prcm_clocks {
-	func_32k_ck: func_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	secure_32k_ck: secure_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12m_ck: virt_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13m_ck: virt_13m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26m_ck: virt_26m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	aplls_clkin_ck: aplls_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0540>;
-	};
-
-	aplls_clkin_x2_ck: aplls_clkin_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&aplls_clkin_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	osc_ck: osc_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0060>;
-		ti,index-starts-at-one;
-	};
-
-	sys_ck: sys_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&osc_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x0060>;
-		ti,index-starts-at-one;
-	};
-
-	alt_ck: alt_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <54000000>;
-	};
-
-	mcbsp_clks: mcbsp_clks {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	dpll_ck: dpll_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-dpll-core-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0500>, <0x0540>;
-	};
-
-	apll96_ck: apll96_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-apll-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <2>;
-		ti,idlest-shift = <8>;
-		ti,clock-frequency = <96000000>;
-		reg = <0x0500>, <0x0530>, <0x0520>;
-	};
-
-	apll54_ck: apll54_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-apll-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		ti,idlest-shift = <9>;
-		ti,clock-frequency = <54000000>;
-		reg = <0x0500>, <0x0530>, <0x0520>;
-	};
-
-	func_54m_ck: func_54m_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&apll54_ck>, <&alt_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0540>;
-	};
-
-	core_ck: core_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_96m_ck: func_96m_ck {
-		#clock-cells = <0>;
-	};
-
-	apll96_d2_ck: apll96_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll96_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_48m_ck: func_48m_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&apll96_d2_ck>, <&alt_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0540>;
-	};
-
-	func_12m_ck: func_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&func_48m_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	sys_clkout_src_gate: sys_clkout_src_gate {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout_src_mux: sys_clkout_src_mux {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout_src: sys_clkout_src {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
-	};
-
-	sys_clkout: sys_clkout {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkout_src>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0070>;
-		ti,index-power-of-two;
-	};
-
-	emul_ck: emul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_54m_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0078>;
-	};
-
-	mpu_ck: mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-	};
-
-	dsp_gate_fck: dsp_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0800>;
-	};
-
-	dsp_div_fck: dsp_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		reg = <0x0840>;
-	};
-
-	dsp_fck: dsp_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
-	};
-
-	core_l3_ck: core_l3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0240>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_3d_gate_fck: gfx_3d_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0300>;
-	};
-
-	gfx_3d_div_fck: gfx_3d_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,max-div = <4>;
-		reg = <0x0340>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_3d_fck: gfx_3d_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
-	};
-
-	gfx_2d_gate_fck: gfx_2d_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0300>;
-	};
-
-	gfx_2d_div_fck: gfx_2d_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,max-div = <4>;
-		reg = <0x0340>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_2d_fck: gfx_2d_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
-	};
-
-	gfx_ick: gfx_ick {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0310>;
-	};
-
-	l4_ck: l4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0240>;
-		ti,index-starts-at-one;
-	};
-
-	dss_ick: dss_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0210>;
-	};
-
-	dss1_gate_fck: dss1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0200>;
-	};
-
-	core_d2_ck: core_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	core_d3_ck: core_d3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	core_d4_ck: core_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	core_d5_ck: core_d5_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <5>;
-	};
-
-	core_d6_ck: core_d6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <6>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	core_d8_ck: core_d8_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	core_d9_ck: core_d9_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <9>;
-	};
-
-	core_d12_ck: core_d12_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <12>;
-	};
-
-	core_d16_ck: core_d16_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dss1_mux_fck: dss1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0240>;
-	};
-
-	dss1_fck: dss1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
-	};
-
-	dss2_gate_fck: dss2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0200>;
-	};
-
-	dss2_mux_fck: dss2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&func_48m_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0240>;
-	};
-
-	dss2_fck: dss2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
-	};
-
-	dss_54m_fck: dss_54m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_54m_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0200>;
-	};
-
-	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0204>;
-	};
-
-	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0240>;
-	};
-
-	ssi_ssr_sst_fck: ssi_ssr_sst_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0214>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0240>;
-		ti,dividers = <0>, <1>, <2>, <0>, <4>;
-	};
-
-	usb_l4_ick: usb_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0214>;
-	};
-
-	gpt1_ick: gpt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0410>;
-	};
-
-	gpt1_gate_fck: gpt1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0400>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		reg = <0x0440>;
-	};
-
-	gpt1_fck: gpt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
-	};
-
-	gpt2_ick: gpt2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0210>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0200>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0244>;
-	};
-
-	gpt2_fck: gpt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
-	};
-
-	gpt3_ick: gpt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0210>;
-	};
-
-	gpt3_gate_fck: gpt3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0200>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0244>;
-	};
-
-	gpt3_fck: gpt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
-	};
-
-	gpt4_ick: gpt4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0210>;
-	};
-
-	gpt4_gate_fck: gpt4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0200>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0244>;
-	};
-
-	gpt4_fck: gpt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
-	};
-
-	gpt5_ick: gpt5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0210>;
-	};
-
-	gpt5_gate_fck: gpt5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0200>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0244>;
-	};
-
-	gpt5_fck: gpt5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
-	};
-
-	gpt6_ick: gpt6_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0210>;
-	};
-
-	gpt6_gate_fck: gpt6_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0200>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0244>;
-	};
-
-	gpt6_fck: gpt6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
-	};
-
-	gpt7_ick: gpt7_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0210>;
-	};
-
-	gpt7_gate_fck: gpt7_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0200>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0244>;
-	};
-
-	gpt7_fck: gpt7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
-	};
-
-	gpt8_ick: gpt8_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0210>;
-	};
-
-	gpt8_gate_fck: gpt8_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0200>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0244>;
-	};
-
-	gpt8_fck: gpt8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
-	};
-
-	gpt9_ick: gpt9_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0210>;
-	};
-
-	gpt9_gate_fck: gpt9_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0200>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0244>;
-	};
-
-	gpt9_fck: gpt9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
-	};
-
-	gpt10_ick: gpt10_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0210>;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0200>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0244>;
-	};
-
-	gpt10_fck: gpt10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
-	};
-
-	gpt11_ick: gpt11_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0210>;
-	};
-
-	gpt11_gate_fck: gpt11_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0200>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0244>;
-	};
-
-	gpt11_fck: gpt11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
-	};
-
-	gpt12_ick: gpt12_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0210>;
-	};
-
-	gpt12_gate_fck: gpt12_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0200>;
-	};
-
-	gpt12_mux_fck: gpt12_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0244>;
-	};
-
-	gpt12_fck: gpt12_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0210>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <15>;
-		reg = <0x0200>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0210>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <16>;
-		reg = <0x0200>;
-	};
-
-	mcspi1_ick: mcspi1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0210>;
-	};
-
-	mcspi1_fck: mcspi1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0200>;
-	};
-
-	mcspi2_ick: mcspi2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0210>;
-	};
-
-	mcspi2_fck: mcspi2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0200>;
-	};
-
-	uart1_ick: uart1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <21>;
-		reg = <0x0210>;
-	};
-
-	uart1_fck: uart1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <21>;
-		reg = <0x0200>;
-	};
-
-	uart2_ick: uart2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0210>;
-	};
-
-	uart2_fck: uart2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0200>;
-	};
-
-	uart3_ick: uart3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	uart3_fck: uart3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0204>;
-	};
-
-	gpios_ick: gpios_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0410>;
-	};
-
-	gpios_fck: gpios_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0400>;
-	};
-
-	mpu_wdt_ick: mpu_wdt_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0410>;
-	};
-
-	mpu_wdt_fck: mpu_wdt_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0400>;
-	};
-
-	sync_32k_ick: sync_32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0410>;
-	};
-
-	wdt1_ick: wdt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0410>;
-	};
-
-	omapctrl_ick: omapctrl_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0410>;
-	};
-
-	cam_fck: cam_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0200>;
-	};
-
-	cam_ick: cam_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0210>;
-	};
-
-	mailboxes_ick: mailboxes_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0210>;
-	};
-
-	wdt4_ick: wdt4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0210>;
-	};
-
-	wdt4_fck: wdt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0200>;
-	};
-
-	mspro_ick: mspro_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x0210>;
-	};
-
-	mspro_fck: mspro_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x0200>;
-	};
-
-	fac_ick: fac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0210>;
-	};
-
-	fac_fck: fac_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0200>;
-	};
-
-	hdq_ick: hdq_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0210>;
-	};
-
-	hdq_fck: hdq_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0200>;
-	};
-
-	i2c1_ick: i2c1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0210>;
-	};
-
-	i2c2_ick: i2c2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0210>;
-	};
-
-	gpmc_fck: gpmc_fck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <1>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	sdma_fck: sdma_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sdma_ick: sdma_ick {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <0>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	sdrc_ick: sdrc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <2>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	des_ick: des_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x021c>;
-	};
-
-	sha_ick: sha_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x021c>;
-	};
-
-	rng_ick: rng_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-
-	aes_ick: aes_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x021c>;
-	};
-
-	pka_ick: pka_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x021c>;
-	};
-
-	usb_fck: usb_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0204>;
-	};
-};
diff --git a/src/arm/omap3-beagle-xm-ab.dts b/src/arm/omap3-beagle-xm-ab.dts
deleted file mode 100644
index 7ac3bcf59d59..000000000000
--- a/src/arm/omap3-beagle-xm-ab.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap3-beagle-xm.dts"
-
-/ {
-	/* HS USB Port 2 Power enable was inverted with the xM C */
-	hsusb2_power: hsusb2_power_reg {
-		enable-active-high;
-	};
-};
diff --git a/src/arm/omap3-beagle-xm.dts b/src/arm/omap3-beagle-xm.dts
deleted file mode 100644
index 1becefce821b..000000000000
--- a/src/arm/omap3-beagle-xm.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pmu_stat {
-			label = "beagleboard::pmu_stat";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3beagle";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		user {
-			label = "user";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x114>;
-			gpio-key,wakeup;
-		};
-
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
-		vcc-supply = <&hsusb2_power>;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
-
-		/* XXX pinctrl from twl */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tv0: connector@1 {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
-		>;
-	};
-
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
-			ti,use_poweroff;
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
-	/*
-	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c4>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&vaux2 {
-	regulator-name = "usb_1v8";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins1
-		&dss_dpi_pins2
-	>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "ok";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
diff --git a/src/arm/omap3-beagle.dts b/src/arm/omap3-beagle.dts
deleted file mode 100644
index 3c3e6da1deac..000000000000
--- a/src/arm/omap3-beagle.dts
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pmu_stat {
-			label = "beagleboard::pmu_stat";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-		};
-
-		heartbeat {
-			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
-		vcc-supply = <&hsusb2_power>;
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3beagle";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		user {
-			label = "user";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x114>;
-			gpio-key,wakeup;
-		};
-
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tfp410_pins>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tv0: connector@1 {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
-	/*
-	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c4>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux2 {
-	regulator-name = "vdd_ehci";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "ok";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
diff --git a/src/arm/omap3-cm-t3517.dts b/src/arm/omap3-cm-t3517.dts
deleted file mode 100644
index d00502f4fd9b..000000000000
--- a/src/arm/omap3-cm-t3517.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Support for CompuLab CM-T3517
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-#include "omap3-cm-t3x.dtsi"
-
-/ {
-	model = "CompuLab CM-T3517";
-	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
-
-	vmmc:  regulator-vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vw1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-				&wl12xx_wkup_pins
-				&wl12xx_core_pins
-			    >;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
-		startup-delay-us = <20000>;
-		enable-active-high;
-	};
-
-	wl12xx_vaux2: wl12xx_vaux2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271_vaux2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-};
-
-&omap3_pmx_wkup {
-
-	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
-			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-
-	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
-		>;
-	};
-
-	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
-		>;
-	};
-
-	otg_drv_vbus: pinmux_otg_drv_vbus {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	wl12xx_core_pins: pinmux_wl12xx_core_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	usb_hub_pins: pinmux_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
-		>;
-	};
-};
-
-&hsusb1_phy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&phy1_reset_pins>;
-	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
-};
-
-&hsusb2_phy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&phy2_reset_pins>;
-	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
-};
-
-&davinci_emac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&am35x_otg_hs {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&otg_drv_vbus>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	vmmc_aux-supply = <&wl12xx_vaux2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
diff --git a/src/arm/omap3-cm-t3530.dts b/src/arm/omap3-cm-t3530.dts
deleted file mode 100644
index d1458496520e..000000000000
--- a/src/arm/omap3-cm-t3530.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Support for CompuLab CM-T3530
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap3-cm-t3x30.dtsi"
-
-/ {
-	model = "CompuLab CM-T3530";
-	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
-
-	/* Regulator to trigger the reset signal of the Wifi module */
-	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-mmc2-sdio-reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&mmc2_sdio_reset>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
diff --git a/src/arm/omap3-cm-t3730.dts b/src/arm/omap3-cm-t3730.dts
deleted file mode 100644
index b3f9a50b3bc8..000000000000
--- a/src/arm/omap3-cm-t3730.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Support for CompuLab CM-T3730
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-cm-t3x30.dtsi"
-
-/ {
-	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vw1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
-		startup-delay-us = <20000>;
-		enable-active-high;
-	};
-
-	wl12xx_vaux2: wl12xx_vaux2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271_vaux2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vaux2>;
-	};
-};
-
-&omap3_pmx_core {
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	vmmc_aux-supply = <&wl12xx_vaux2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
diff --git a/src/arm/omap3-cm-t3x.dtsi b/src/arm/omap3-cm-t3x.dtsi
deleted file mode 100644
index c671a2299ea8..000000000000
--- a/src/arm/omap3-cm-t3x.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Common support for CompuLab CM-T3x CoMs
- */
-
-/ {
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&green_led_pins>;
-		ledb {
-			label = "cm-t3x:green";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&hsusb1_power>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&hsusb2_power>;
-	};
-};
-
-&omap3_pmx_core {
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	green_led_pins: pinmux_green_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
-		>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-&usbhshost {
-	port1-mode = "ehci-phy";
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy &hsusb2_phy>;
-};
diff --git a/src/arm/omap3-cm-t3x30.dtsi b/src/arm/omap3-cm-t3x30.dtsi
deleted file mode 100644
index 25ba08331d88..000000000000
--- a/src/arm/omap3-cm-t3x30.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Common support for CompuLab CM-T3x30 CoMs
- */
-
-#include "omap3-cm-t3x.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-};
-
-&omap3_pmx_core {
-
-	smsc1_pins: pinmux_smsc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
-			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
-		>;
-	};
-
- 	hsusb0_pins: pinmux_hsusb0_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-};
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>;
-
-	smsc1: ethernet@gpmc {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc1_pins>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		reg = <5 0 0xff>;
-	};
-};
-
-&i2c1 {
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(0) */
-	ti,pullups = <0x000001>;
-};
-
-&hsusb1_phy {
-	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
-};
-
-&hsusb2_phy {
-	reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb0_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/src/arm/omap3-devkit8000.dts b/src/arm/omap3-devkit8000.dts
deleted file mode 100644
index da402f0fdab4..000000000000
--- a/src/arm/omap3-devkit8000.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Author: Anil Kumar <anilk4.v@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-/ {
-	model = "TimLL OMAP3 Devkit8000";
-	compatible = "timll,omap3-devkit8000", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			label = "devkit8000::led1";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "devkit8000::led2";
-			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
-			default-state = "on";
-			linux,default-trigger = "none";
-		};
-
-		usr {
-			label = "devkit8000::led3";
-			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
-			default-state = "on";
-			linux,default-trigger = "usr";
-                };
-
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "devkit8000";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-		ti,audio-routing =
-			"Ext Spk", "PREDRIVEL",
-			"Ext Spk", "PREDRIVER",
-			"MAINMIC", "Main Mic",
-			"Main Mic", "Mic Bias 1";
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x04>;       /* CS0: NAND */
-
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <16>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "File System";
-			reg = <0x680000 0xf980000>;
-		};
-	};
-};
diff --git a/src/arm/omap3-evm-37xx.dts b/src/arm/omap3-evm-37xx.dts
deleted file mode 100644
index a8bd4349c7d2..000000000000
--- a/src/arm/omap3-evm-37xx.dts
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-evm-common.dtsi"
-
-
-/ {
-	model = "TI OMAP37XX EVM (TMDSEVM3730)";
-	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins1
-		&dss_dpi_pins2
-	>;
-};
-
-&omap3_pmx_core {
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
-		>;
-	};
-
-	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
-			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
-		>;
-	};
-
-	smsc911x_pins: pinmux_smsc911x_pins {
-		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x20000000>,
-		 <5 0 0x2c000000 0x01000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "hynix,h8kds0un0mer-4em";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@0x80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-		partition@0x1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>;
-		};
-		partition@0x280000 {
-			label = "Kernel";
-			reg = <0x280000 0x500000>;
-		};
-		partition@0x780000 {
-			label = "Filesystem";
-			reg = <0x780000 0x1f880000>;
-		};
-	};
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc911x_pins>;
-	};
-};
diff --git a/src/arm/omap3-evm-common.dtsi b/src/arm/omap3-evm-common.dtsi
deleted file mode 100644
index c8747c7f1cc8..000000000000
--- a/src/arm/omap3-evm-common.dtsi
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Common support for omap3 EVM boards
- */
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		ledb {
-			label = "omap3evm::ledb";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 22 0>;	/* gpio150 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&vmmc2>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include "omap3-panel-sharp-ls037v7dw01.dtsi"
-
-&backlight0 {
-	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
-};
-
-&twl {
-	twl_power: power {
-		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
-		ti,use_poweroff;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&lcd_3v3 {
-	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
-	enable-active-low;
-};
-
-&lcd0 {
-	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
-	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
-	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
-		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
-		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 0>;		/* gpio175 */
-		pendown-gpio = <&gpio6 15 0>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&gpmc {
-	ethernet@gpmc {
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 8>;
-		reg = <5 0 0xff>;
-	};
-};
diff --git a/src/arm/omap3-evm.dts b/src/arm/omap3-evm.dts
deleted file mode 100644
index e10dcd0fa539..000000000000
--- a/src/arm/omap3-evm.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap3-evm-common.dtsi"
-
-/ {
-	model = "TI OMAP35XX EVM (TMDSEVM3530)";
-	compatible = "ti,omap3-evm", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-};
diff --git a/src/arm/omap3-gta04.dts b/src/arm/omap3-gta04.dts
deleted file mode 100644
index 021311f7964b..000000000000
--- a/src/arm/omap3-gta04.dts
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
- *
- * Based on omap3-beagle-xm.dts
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		aux-button {
-			label = "aux";
-			linux,code = <169>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "gta04";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	spi_lcd {
-		compatible = "spi-gpio";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi_gpio_pins>;
-
-		gpio-sck = <&gpio1 12 0>;
-		gpio-miso = <&gpio1 18 0>;
-		gpio-mosi = <&gpio1 20 0>;
-		cs-gpios = <&gpio1 19 0>;
-		num-chipselects = <1>;
-
-		/* lcd panel */
-		lcd: td028ttec1@0 {
-			compatible = "toppoly,td028ttec1";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-
-			label = "lcd";
-			port {
-				lcd_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-               pinctrl-single,pins = <
-                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-               >;
-       };
-
-	spi_gpio_pins: spi_gpio_pinmux {
-		pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
-			0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
-			0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
-			0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-
-	twl_audio: audio {
-		compatible = "ti,twl4030-audio";
-		codec {
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-
-	/* pressure sensor */
-	bmp085@77 {
-		compatible = "bosch,bmp085";
-		reg = <0x77>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	/* accelerometer */
-	bma180@41 {
-		compatible = "bosch,bma180";
-		reg = <0x41>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* leds */
-	tca6507@45 {
-		compatible = "ti,tca6507";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x45>;
-
-		gta04_led0: red_aux@0 {
-			label = "gta04:red:aux";
-			reg = <0x0>;
-		};
-
-		gta04_led1: green_aux@1 {
-			label = "gta04:green:aux";
-			reg = <0x1>;
-		};
-
-		gta04_led3: red_power@3 {
-			label = "gta04:red:power";
-			reg = <0x3>;
-			linux,default-trigger = "default-on";
-		};
-
-		gta04_led4: green_power@4 {
-			label = "gta04:green:power";
-			reg = <0x4>;
-		};
-	};
-
-	/* compass aka magnetometer */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5843";
-		reg = <0x1e>;
-	};
-
-	/* touchscreen */
-	tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <600>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux4>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&charger {
-	bb_uvolt = <3200000>;
-	bb_uamp = <150>;
-};
-
-&vaux4 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = < &dss_dpi_pins >;
-
-	status = "okay";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/omap3-igep.dtsi b/src/arm/omap3-igep.dtsi
deleted file mode 100644
index e2d163bf0619..000000000000
--- a/src/arm/omap3-igep.dtsi
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Common device tree for IGEP boards based on AM/DM37x
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "igep2";
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	vdd33: regulator-vdd33 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33";
-		regulator-always-on;
-	};
-
-	lbee1usjyc_vmmc: lbee1usjyc_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lbee1usjyc_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 WIFI_PDN */
-		startup-delay-us = <10000>;
-		enable-active-high;
-		vin-supply = <&vdd33>;
-	};
-};
-
-&omap3_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	/* WiFi/BT combo */
-	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
-		pinctrl-single,pins = <
-			0x136 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 */
-			0x138 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
-			0x13a (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
-			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
-			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
-			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	smsc9221_pins: pinmux_smsc9221_pins {
-		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x18e (PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
-			0x190 (PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			      };
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&mmc1 {
-      pinctrl-names = "default";
-      pinctrl-0 = <&mmc1_pins>;
-      vmmc-supply = <&vmmc1>;
-      vmmc_aux-supply = <&vsim>;
-      bus-width = <4>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&lbee1usjyc_vmmc>;
-	bus-width = <4>;
-	non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/src/arm/omap3-igep0020.dts b/src/arm/omap3-igep0020.dts
deleted file mode 100644
index b22caaaf774b..000000000000
--- a/src/arm/omap3-igep0020.dts
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-		compatible = "gpio-leds";
-
-		boot {
-			 label = "omap3:green:boot";
-			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			 default-state = "on";
-		};
-
-		user0 {
-			 label = "omap3:red:user0";
-			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user1 {
-			 label = "omap3:red:user1";
-			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user2 {
-			label = "omap3:green:user1";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-       /* HS USB Port 1 Power */
-       hsusb1_power: hsusb1_power_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "hsusb1_vbus";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
-               startup-delay-us = <70000>;
-       };
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
-		vcc-supply = <&hsusb1_power>;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&tfp410_pins
-		&dss_dpi_pins
-	>;
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb1_pins
-	>;
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
-		>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in the EEPROM
-	 * as EDID data.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x20000000>,
-		 <5 0 0x2c000000 0x01000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "micron,mt29c4g96maz";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0 0x100000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x100000 0x180000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x280000 0x100000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x380000 0x300000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x680000 0x1f980000>;
-		};
-	};
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc9221_pins>;
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
-        /* Needed for DSS */
-        regulator-name = "vdds_dsi";
-};
-
-&dss {
-	status = "ok";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/omap3-igep0030.dts b/src/arm/omap3-igep0030.dts
deleted file mode 100644
index 2793749eb1ba..000000000000
--- a/src/arm/omap3-igep0030.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap3-igep.dtsi"
-
-/ {
-	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-		compatible = "gpio-leds";
-
-		boot {
-			 label = "omap3:green:boot";
-			 gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
-			 default-state = "on";
-		};
-
-		user0 {
-			 label = "omap3:red:user0";
-			 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
-			 default-state = "off";
-		};
-
-		user1 {
-			 label = "omap3:green:user1";
-			 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
-			 default-state = "off";
-		};
-
-		user2 {
-			 label = "omap3:red:user1";
-			 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-			 default-state = "off";
-		};
-	};
-};
-
-&omap3_pmx_core2 {
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "micron,mt29c4g96maz";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0 0x100000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x100000 0x180000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x280000 0x100000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x380000 0x300000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x680000 0x1f980000>;
-		};
-	};
-};
diff --git a/src/arm/omap3-ldp.dts b/src/arm/omap3-ldp.dts
deleted file mode 100644
index af272c156e21..000000000000
--- a/src/arm/omap3-ldp.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
-
-/ {
-	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
-	compatible = "ti,omap3-ldp", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-
-		key_enter {
-			label = "enter";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
-			linux,code = <0x0107001c>; /* KEY_ENTER */
-			gpio-key,wakeup;
-		};
-
-		key_f1 {
-			label = "f1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
-			linux,code = <0x0303003b>; /* KEY_F1 */
-			gpio-key,wakeup;
-		};
-
-		key_f2 {
-			label = "f2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
-			linux,code = <0x0403003c>; /* KEY_F2 */
-			gpio-key,wakeup;
-		};
-
-		key_f3 {
-			label = "f3";
-			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
-			linux,code = <0x0503003d>; /* KEY_F3 */
-			gpio-key,wakeup;
-		};
-
-		key_f4 {
-			label = "f4";
-			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
-			linux,code = <0x0704003e>; /* KEY_F4 */
-			gpio-key,wakeup;
-		};
-
-		key_left {
-			label = "left";
-			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
-			linux,code = <0x04070069>; /* KEY_LEFT */
-			gpio-key,wakeup;
-		};
-
-		key_right {
-			label = "right";
-			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
-			linux,code = <0x0507006a>; /* KEY_RIGHT */
-			gpio-key,wakeup;
-		};
-
-		key_up {
-			label = "up";
-			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
-			linux,code = <0x06070067>; /* KEY_UP */
-			gpio-key,wakeup;
-		};
-
-		key_down {
-			label = "down";
-			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
-			linux,code = <0x0707006c>; /* KEY_DOWN */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x01000000>,
-		 <1 0 0x08000000 0x01000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "micron,nand";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x140000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x1c0000 0x40000>;
-		};
-		partition@200000 {
-			label = "Kernel";
-			reg = <0x200000 0x1e00000>;
-		};
-		partition@2000000 {
-			label = "Filesystem";
-			reg = <0x2000000 0xe000000>;
-		};
-	};
-
-	ethernet@gpmc {
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		reg = <1 0 0xff>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include "omap3-panel-sharp-ls037v7dw01.dtsi"
-
-&backlight0 {
-	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-/* tps61130rsa enabled by twl4030 regen */
-&lcd_3v3 {
-	regulator-always-on;
-};
-
-&lcd0 {
-	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
-	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
-	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <22 0>;		/* gpio54 */
-		pendown-gpio = <&gpio2 22 0>;
-	};
-};
-
-&mmc1 {
-	/* See 35xx errata 2.1.1.128 in SPRZ278F */
-	compatible = "ti,omap3-pre-es3-hsmmc";
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
-	status="disabled";
-};
-
-&mmc3 {
-	status="disabled";
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
-			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
-			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
-			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
-			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
-			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
-			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
-			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
-			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
-		>;
-	};
-
-	musb_pins: pinmux_musb_pins {
-		pinctrl-single,pins = <
-			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
-		>;
-	};
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&musb_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux1 {
-	/* Needed for ads7846 */
-        regulator-name = "vcc";
-};
diff --git a/src/arm/omap3-lilly-a83x.dtsi b/src/arm/omap3-lilly-a83x.dtsi
deleted file mode 100644
index d97308896f0c..000000000000
--- a/src/arm/omap3-lilly-a83x.dtsi
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "INCOstartec LILLY-A83X module (DM3730)";
-	compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
-
-	chosen {
-			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;   /* 128 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "lilly-a83x::led1";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "lilly-a83x";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	reg_vcc3: vcc3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_vcc3>;
-	};
-};
-
-&omap3_pmx_wkup {
-	pinctrl-names = "default";
-
-	lan9221_pins: pinmux_lan9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
-		>;
-	};
-
-	tsc2048_pins: pinmux_tsc2048_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
-		>;
-	};
-
-	mmc1cd_pins: pinmux_mmc1cd_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
-		>;
-	};
-
-	hsusb1_pins: pinmux_hsusb1_pins {
-		pinctrl-single,pins = <
-
-			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
-			 * reset can't be controlled. So we clamp this GPIO to
-			 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
-			 */
-
-			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
-		>;
-	};
-
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	spi2_pins: pinmux_spi2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-
-	hsusb1_2_pins: pinmux_hsusb1_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
-		>;
-	};
-
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
-		>;
-	};
-
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&gpio6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl {
-	vmmc1: regulator-vmmc1 {
-		regulator-always-on;
-	};
-
-	vdd1: regulator-vdd1 {
-		regulator-always-on;
-	};
-
-	vdd2: regulator-vdd2 {
-		regulator-always-on;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-};
-
-&i2c3 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-		gpiom1: gpio@20 {
-			compatible = "mcp,mcp23017";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x20>;
-		};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&mmc1 {
-	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
-	cd-inverted;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins>;
-
-	tsc2046@0 {
-		reg = <0>;   /* CS0 */
-		compatible = "ti,tsc2046";
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 0>;   /* boot6 / gpio_8 */
-		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 0>;
-		vcc-supply = <&reg_vcc3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2048_pins>;
-
-		ti,x-min = <300>;
-		ti,x-max = <3000>;
-		ti,y-min = <600>;
-		ti,y-max = <3600>;
-		ti,x-plate-ohms = <80>;
-		ti,pressure-max = <255>;
-		ti,swap-xy;
-
-		linux,wakeup;
-	};
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&usbhshost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_2_pins>;
-	num-ports = <2>;
-	port1-mode = "ehci-phy";
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb_otg_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,
-		<7 0 0x15000000 0x01000000>;
-
-	nand@0,0 {
-		reg = <0 0 0x1000000>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		/* no elm on omap3 */
-
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <2>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,burst-length= <4>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <100>;
-		gpmc,cs-wr-off-ns = <100>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <100>;
-		gpmc,adv-wr-off-ns = <100>;
-		gpmc,oe-on-ns = <5>;
-		gpmc,oe-off-ns = <75>;
-		gpmc,we-on-ns = <5>;
-		gpmc,we-off-ns = <75>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <60>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <50>;
-		gpmc,wr-data-mux-bus-ns = <75>;
-		gpmc,wr-access-ns = <155>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "MLO";
-			reg = <0 0x80000>;
-		};
-
-		partition@0x80000 {
-			label = "u-boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		partition@0x260000 {
-			label = "u-boot-environment";
-			reg = <0x260000 0x20000>;
-		};
-
-		partition@0x280000 {
-			label = "kernel";
-			reg = <0x280000 0x500000>;
-		};
-
-		partition@0x780000 {
-			label = "filesystem";
-			reg = <0x780000 0xf880000>;
-		};
-	};
-
-	ethernet@7,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <60>;
-		gpmc,cs-wr-off-ns = <60>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <60>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <50>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wr-data-mux-bus-ns = <15>;
-		gpmc,wr-access-ns = <75>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&reg_vcc3>;
-		vdd33a-supply = <&reg_vcc3>;
-		reg-io-width = <4>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 0x2>;
-		reg = <7 0 0xff>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9221_pins>;
-		phy-mode = "mii";
-	};
-};
diff --git a/src/arm/omap3-lilly-dbb056.dts b/src/arm/omap3-lilly-dbb056.dts
deleted file mode 100644
index 834f7c65f62d..000000000000
--- a/src/arm/omap3-lilly-dbb056.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-/dts-v1/;
-
-#include "omap3-lilly-a83x.dtsi"
-
-/ {
-	model = "INCOstartec LILLY-DBB056 (DM3730)";
-	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
-};
-
-&twl {
-	vaux2: regulator-vaux2 {
-		compatible = "ti,twl4030-vaux2";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-
-	lan9117_pins: pinmux_lan9117_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
-		>;
-	};
-
-	gpio4_pins: pinmux_gpio4_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
-		>;
-	};
-
-	gpio5_pins: pinmux_gpio5_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
-		>;
-	};
-
-	lcd_pins: pinmux_lcd_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat4.sdmmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat5.sdmmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat6.sdmmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)    /* sdmmc2_dat7.sdmmc2_clkin */
-			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_cts_rctx.gpio_163 -> wp */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_rts_sd.gpio_164 -> cd */
-		>;
-	};
-
-	spi1_pins: pinmux_spi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)   /* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-};
-
-&gpio4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio4_pins>;
-};
-
-&gpio5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio5_pins>;
-};
-
-&mmc2 {
-	status = "okay";
-	bus-width = <4>;
-	vmmc-supply = <&vmmc1>;
-	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
-	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	ti,dual-volt;
-};
-
-&mcspi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,   /* nand assigned by COM a83x */
-		<4 0 0x20000000 0x01000000>,
-		<7 0 0x15000000 0x01000000>;   /* eth assigend by COM a83x */
-
-	ethernet@4,0 {
-		compatible = "smsc,lan9117", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <65>;
-		gpmc,cs-wr-off-ns = <65>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <65>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <65>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <60>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wr-data-mux-bus-ns = <15>;
-		gpmc,wr-access-ns = <75>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&reg_vcc3>;
-		vdd33a-supply = <&reg_vcc3>;
-		reg-io-width = <4>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <2 0x2>;
-		reg = <4 0 0xff>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9117_pins>;
-		phy-mode = "mii";
-		smsc,force-internal-phy;
-	};
-};
diff --git a/src/arm/omap3-n9.dts b/src/arm/omap3-n9.dts
deleted file mode 100644
index 9938b5dc1909..000000000000
--- a/src/arm/omap3-n9.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * omap3-n9.dts - Device Tree file for Nokia N9
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap3-n950-n9.dtsi"
-
-/ {
-	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
-};
diff --git a/src/arm/omap3-n900.dts b/src/arm/omap3-n900.dts
deleted file mode 100644
index b15f1a77d684..000000000000
--- a/src/arm/omap3-n900.dts
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
- * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 (or later) as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap34xx-hs.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Nokia N900";
-	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		heartbeat {
-			label = "debug::sleep";
-			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
-			linux,default-trigger = "default-on";
-			pinctrl-names = "default";
-			pinctrl-0 = <&debug_leds>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		camera_lens_cover {
-			label = "Camera Lens Cover";
-			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
-			gpio-key,wakeup;
-		};
-
-		camera_focus {
-			label = "Camera Focus";
-			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
-			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
-			gpio-key,wakeup;
-		};
-
-		camera_capture {
-			label = "Camera Capture";
-			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
-			linux,code = <0xd4>; /* KEY_CAMERA */
-			gpio-key,wakeup;
-		};
-
-		lock_button {
-			label = "Lock Button";
-			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
-			linux,code = <0x98>; /* KEY_SCREENLOCK */
-			gpio-key,wakeup;
-		};
-
-		keypad_slide {
-			label = "Keypad Slide";
-			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
-			gpio-key,wakeup;
-		};
-
-		proximity_sensor {
-			label = "Proximity Sensor";
-			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
-		};
-	};
-
-	isp1704: isp1704 {
-		compatible = "nxp,isp1704";
-		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		usb-phy = <&usb2_phy>;
-	};
-
-	tv: connector {
-		compatible = "composite-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-
-	sound: n900-audio {
-		compatible = "nokia,n900-audio";
-
-		nokia,cpu-dai = <&mcbsp2>;
-		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
-		nokia,headphone-amplifier = <&tpa6130a2>;
-
-		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
-		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
-		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
-		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	debug_leds: pinmux_debug_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
-			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
-			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
-			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
-			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
-		>;
-	};
-
-	acx565akm_pins: pinmux_acx565akm_pins {
-		pinctrl-single,pins = <
-			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
-		>;
-	};
-
-	dss_sdi_pins: pinmux_dss_sdi_pins {
-		pinctrl-single,pins = <
-			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
-			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
-			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
-			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
-
-			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
-			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
-		>;
-	};
-
-	wl1251_pins: pinmux_wl1251 {
-		pinctrl-single,pins = <
-			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
-			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
-		>;
-	};
-
-	ssi_pins: pinmux_ssi {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
-			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
-			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
-			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
-			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
-			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
-			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
-			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
-		>;
-	};
-
-	modem_pins: pinmux_modem {
-		pinctrl-single,pins = <
-			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
-			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
-			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
-			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
-			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
-			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <2200000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&vaux1 {
-	regulator-name = "V28";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-always-on; /* due battery cover sensor */
-};
-
-&vaux2 {
-	regulator-name = "VCSI";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vaux3 {
-	regulator-name = "VMMC2_30";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
-	regulator-name = "VCAM_ANA_28";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&vmmc1 {
-	regulator-name = "VMMC1";
-	regulator-min-microvolt = <1850000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-&vmmc2 {
-	regulator-name = "V28_A";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-always-on; /* due VIO leak to AIC34 VDDs */
-};
-
-&vpll1 {
-	regulator-name = "VPLL";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&vpll2 {
-	regulator-name = "VSDI_CSI";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&vsim {
-	regulator-name = "VMMC2_IO_18";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vio {
-	regulator-name = "VIO";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-
-};
-
-&vintana1 {
-	regulator-name = "VINTANA1";
-	/* fixed to 1500000 */
-	regulator-always-on;
-};
-
-&vintana2 {
-	regulator-name = "VINTANA2";
-	regulator-min-microvolt = <2750000>;
-	regulator-max-microvolt = <2750000>;
-	regulator-always-on;
-};
-
-&vintdig {
-	regulator-name = "VINTDIG";
-	/* fixed to 1500000 */
-	regulator-always-on;
-};
-
-&twl {
-	twl_audio: audio {
-		compatible = "ti,twl4030-audio";
-		ti,enable-vibra = <1>;
-	};
-
-	twl_power: power {
-		compatible = "ti,twl4030-power-n900";
-		ti,use_poweroff;
-	};
-};
-
-&twl_keypad {
-	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
-			 MATRIX_KEY(0x00, 0x01, KEY_O)
-			 MATRIX_KEY(0x00, 0x02, KEY_P)
-			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
-			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
-			 MATRIX_KEY(0x00, 0x06, KEY_A)
-			 MATRIX_KEY(0x00, 0x07, KEY_S)
-
-			 MATRIX_KEY(0x01, 0x00, KEY_W)
-			 MATRIX_KEY(0x01, 0x01, KEY_D)
-			 MATRIX_KEY(0x01, 0x02, KEY_F)
-			 MATRIX_KEY(0x01, 0x03, KEY_G)
-			 MATRIX_KEY(0x01, 0x04, KEY_H)
-			 MATRIX_KEY(0x01, 0x05, KEY_J)
-			 MATRIX_KEY(0x01, 0x06, KEY_K)
-			 MATRIX_KEY(0x01, 0x07, KEY_L)
-
-			 MATRIX_KEY(0x02, 0x00, KEY_E)
-			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
-			 MATRIX_KEY(0x02, 0x02, KEY_UP)
-			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
-			 MATRIX_KEY(0x02, 0x05, KEY_Z)
-			 MATRIX_KEY(0x02, 0x06, KEY_X)
-			 MATRIX_KEY(0x02, 0x07, KEY_C)
-			 MATRIX_KEY(0x02, 0x08, KEY_F9)
-
-			 MATRIX_KEY(0x03, 0x00, KEY_R)
-			 MATRIX_KEY(0x03, 0x01, KEY_V)
-			 MATRIX_KEY(0x03, 0x02, KEY_B)
-			 MATRIX_KEY(0x03, 0x03, KEY_N)
-			 MATRIX_KEY(0x03, 0x04, KEY_M)
-			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
-			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
-			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
-
-			 MATRIX_KEY(0x04, 0x00, KEY_T)
-			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
-			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
-			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
-			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
-			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
-			 MATRIX_KEY(0x04, 0x08, KEY_F10)
-
-			 MATRIX_KEY(0x05, 0x00, KEY_Y)
-			 MATRIX_KEY(0x05, 0x08, KEY_F11)
-
-			 MATRIX_KEY(0x06, 0x00, KEY_U)
-
-			 MATRIX_KEY(0x07, 0x00, KEY_I)
-			 MATRIX_KEY(0x07, 0x01, KEY_F7)
-			 MATRIX_KEY(0x07, 0x02, KEY_F8)
-			 >;
-};
-
-&twl_gpio {
-	ti,pullups	= <0x0>;
-	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <100000>;
-
-	tlv320aic3x: tlv320aic3x@18 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x18>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
-		ai3x-gpio-func = <
-			0 /* AIC3X_GPIO1_FUNC_DISABLED */
-			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
-		>;
-
-		AVDD-supply = <&vmmc2>;
-		DRVDD-supply = <&vmmc2>;
-		IOVDD-supply = <&vio>;
-		DVDD-supply = <&vio>;
-	};
-
-	tlv320aic3x_aux: tlv320aic3x@19 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x19>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
-
-		AVDD-supply = <&vmmc2>;
-		DRVDD-supply = <&vmmc2>;
-		IOVDD-supply = <&vio>;
-		DVDD-supply = <&vio>;
-	};
-
-	tsl2563: tsl2563@29 {
-		compatible = "amstaos,tsl2563";
-		reg = <0x29>;
-
-		amstaos,cover-comp-gain = <16>;
-	};
-
-	lp5523: lp5523@32 {
-		compatible = "national,lp5523";
-		reg = <0x32>;
-		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
-
-		chan0 {
-			chan-name = "lp5523:kb1";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan1 {
-			chan-name = "lp5523:kb2";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan2 {
-			chan-name = "lp5523:kb3";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan3 {
-			chan-name = "lp5523:kb4";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan4 {
-			chan-name = "lp5523:b";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan5 {
-			chan-name = "lp5523:g";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan6 {
-			chan-name = "lp5523:r";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan7 {
-			chan-name = "lp5523:kb5";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan8 {
-			chan-name = "lp5523:kb6";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-	};
-
-	bq27200: bq27200@55 {
-		compatible = "ti,bq27200";
-		reg = <0x55>;
-	};
-
-	tpa6130a2: tpa6130a2@60 {
-		compatible = "ti,tpa6130a2";
-		reg = <0x60>;
-
-		Vdd-supply = <&vmmc2>;
-
-		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
-	};
-
-	bq24150a: bq24150a@6b {
-		compatible = "ti,bq24150a";
-		reg = <0x6b>;
-
-		ti,current-limit = <100>;
-		ti,weak-battery-voltage = <3400>;
-		ti,battery-regulation-voltage = <4200>;
-		ti,charge-current = <650>;
-		ti,termination-current = <100>;
-		ti,resistor-sense = <68>;
-
-		ti,usb-charger-detection = <&isp1704>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
-};
-
-/* most boards use vaux3, only some old versions use vmmc2 instead */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vaux3>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-	non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
-
-	/* gpio-irq for dma: 65 */
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x10000000>;
-
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,burst-write;
-		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
-		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
-		gpmc,page-burst-access-ns = <15>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
-		gpmc,sync-clk-ps = <15000>;
-
-		/*
-		 * MTD partition table corresponding to Nokia's
-		 * Maemo 5 (Fremantle) release.
-		 */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00020000>;
-			read-only;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00020000 0x00060000>;
-		};
-		partition@2 {
-			label = "log";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "kernel";
-			reg = <0x000c0000 0x00200000>;
-		};
-		partition@4 {
-			label = "initfs";
-			reg = <0x002c0000 0x00200000>;
-		};
-		partition@5 {
-			label = "rootfs";
-			reg = <0x004c0000 0x0fb40000>;
-		};
-	};
-};
-
-&mcspi1 {
-	/*
-	 * For some reason, touchscreen is necessary for screen to work at
-	 * all on real hw. It works well without it on emulator.
-	 *
-	 * Also... order in the device tree actually matters here.
-	 */
-	tsc2005@0 {
-		compatible = "ti,tsc2005";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-
-		vio-supply = <&vio>;
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-
-	acx565akm@2 {
-		compatible = "sony,acx565akm";
-		spi-max-frequency = <6000000>;
-		reg = <2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&acx565akm_pins>;
-
-		label = "lcd";
-		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&sdi_out>;
-			};
-		};
-	};
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-
-	wl1251@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl1251_pins>;
-
-		vio-supply = <&vio>;
-
-		compatible = "ti,wl1251";
-		reg = <0>;
-		spi-max-frequency = <48000000>;
-
-		spi-cpol;
-		spi-cpha;
-
-		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
-	};
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <2>;
-	power = <50>;
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_sdi_pins>;
-
-	vdds_sdi-supply = <&vaux1>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			sdi_out: endpoint {
-				remote-endpoint = <&lcd_in>;
-				datapairs = <2>;
-			};
-		};
-	};
-};
-
-&venc {
-	status = "ok";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <1>;
-		};
-	};
-};
-
-&mcbsp2 {
-	status = "ok";
-};
-
-&ssi_port1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ssi_pins>;
-
-	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
-
-	modem: hsi-client {
-		compatible = "nokia,n900-modem";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&modem_pins>;
-
-		hsi-channel-ids = <0>, <1>, <2>, <3>;
-		hsi-channel-names = "mcsaab-control",
-				    "speech-control",
-				    "speech-data",
-				    "mcsaab-data";
-		hsi-speed-kbps = <55000>;
-		hsi-mode = "frame";
-		hsi-flow = "synchronized";
-		hsi-arb-mode = "round-robin";
-
-		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
-
-		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
-			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
-			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
-			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
-			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
-		gpio-names = "cmt_apeslpx",
-			     "cmt_rst_rq",
-			     "cmt_en",
-			     "cmt_rst",
-			     "cmt_bsi";
-	};
-};
-
-&ssi_port2 {
-	status = "disabled";
-};
diff --git a/src/arm/omap3-n950-n9.dtsi b/src/arm/omap3-n950-n9.dtsi
deleted file mode 100644
index 70addcba37c5..000000000000
--- a/src/arm/omap3-n950-n9.dtsi
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap36xx-hs.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	vemmc: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VEMMC";
-		regulator-min-microvolt = <2900000>;
-		regulator-max-microvolt = <2900000>;
-		gpio = <&gpio5 29 0>; /* gpio line 157 */
-		startup-delay-us = <150>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2900000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-/include/ "twl4030.dtsi"
-
-&twl {
-	compatible = "ti,twl5031";
-};
-
-&twl_gpio {
-	ti,pullups	= <0x000001>; /* BIT(0) */
-	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
-};
-
-/* CSI-2 receiver */
-&vaux2 {
-	regulator-name = "vaux2";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-/* Cameras */
-&vaux3 {
-	regulator-name = "vaux3";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vemmc>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x20000000>;
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x20000000>;
-
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,burst-write;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
-		gpmc,page-burst-access-ns = <15>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
-		gpmc,sync-clk-ps = <15000>;
-
-		/*
-		 * MTD partition table corresponding to Nokia's MeeGo 1.2
-		 * Harmattan release.
-		 */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00100000>;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00100000 0x002c0000>;
-		};
-		partition@2 {
-			label = "kernel";
-			reg = <0x003c0000 0x01000000>;
-		};
-		partition@3 {
-			label = "log";
-			reg = <0x013c0000 0x00200000>;
-		};
-		partition@4 {
-			label = "var";
-			reg = <0x015c0000 0x1ca40000>;
-		};
-		partition@5 {
-			label = "moslo";
-			reg = <0x1e000000 0x02000000>;
-		};
-		partition@6 {
-			label = "omap2-onenand";
-			reg = <0x00000000 0x20000000>;
-		};
-	};
-};
diff --git a/src/arm/omap3-n950.dts b/src/arm/omap3-n950.dts
deleted file mode 100644
index 261c5589bfa3..000000000000
--- a/src/arm/omap3-n950.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * omap3-n950.dts - Device Tree file for Nokia N950
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap3-n950-n9.dtsi"
-
-/ {
-	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
-};
diff --git a/src/arm/omap3-overo-alto35-common.dtsi b/src/arm/omap3-overo-alto35-common.dtsi
deleted file mode 100644
index 7aae8fb82c1f..000000000000
--- a/src/arm/omap3-overo-alto35-common.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd35.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		gpio148 {
-			label = "overo:red:gpio148";
-			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
-		};
-		gpio150 {
-			label = "overo:yellow:gpio150";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
-		};
-		gpio151 {
-			label = "overo:blue:gpio151";
-			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
-		};
-		gpio170 {
-			label = "overo:green:gpio170";
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		button0@10 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&omap3_pmx_core {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4)	/* uart1_rx.gpio_151 */
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
-		>;
-	};
-};
-
-&usbhshost {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-alto35.dts b/src/arm/omap3-overo-alto35.dts
deleted file mode 100644
index a3249eb7501d..000000000000
--- a/src/arm/omap3-overo-alto35.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-alto35-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
diff --git a/src/arm/omap3-overo-base.dtsi b/src/arm/omap3-overo-base.dtsi
deleted file mode 100644
index d36bf0250a05..000000000000
--- a/src/arm/omap3-overo-base.dtsi
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * The Gumstix Overo must be combined with an expansion board.
- */
-
-/ {
-	pwmleds {
-		compatible = "pwm-leds";
-
-		overo {
-			label = "overo:blue:COM";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "overo";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
-		vcc-supply = <&hsusb2_power>;
-	};
-
-	/* Regulator to trigger the nPoweron signal of the Wifi module */
-	w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-npoweron";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;		/* gpio_54: nPoweron */
-		enable-active-high;
-	};
-
-	/* Regulator to trigger the nReset signal of the Wifi module */
-	w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
-		pinctrl-names = "default";
-		pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-wifi-nreset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
-		startup-delay-us = <10000>;
-	};
-
-	/* Regulator to trigger the nReset signal of the Bluetooth module */
-	w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-bt-nreset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;		/* gpio_164: BT nReset */
-		startup-delay-us = <10000>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	/* WiFi/BT combo */
-	w3cbw003c_pins: pinmux_w3cbw003c_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)		/* i2c2_scl.gpio_168 */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4)		/* i2c2_sda.gpio_183 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-/* i2c2 pins are used for gpio */
-&i2c2 {
-	status = "disabled";
-};
-
-/* on board microSD slot */
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-/* optional on board WiFi */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&w3cbw003c_npoweron>;
-	vqmmc-supply = <&w3cbw003c_bt_nreset>;
-	vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
-	bus-width = <4>;
-	cap-sdio-irq;
-	non-removable;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
diff --git a/src/arm/omap3-overo-chestnut43-common.dtsi b/src/arm/omap3-overo-chestnut43-common.dtsi
deleted file mode 100644
index 17b82f82638a..000000000000
--- a/src/arm/omap3-overo-chestnut43-common.dtsi
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@23 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
-		};
-		button1@14 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-#include "omap-gpmc-smsc9221.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-chestnut43.dts b/src/arm/omap3-overo-chestnut43.dts
deleted file mode 100644
index fe0824aca3c0..000000000000
--- a/src/arm/omap3-overo-chestnut43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-chestnut43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-common-dvi.dtsi b/src/arm/omap3-overo-common-dvi.dtsi
deleted file mode 100644
index 802f704f67e5..000000000000
--- a/src/arm/omap3-overo-common-dvi.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * DVI output for some Gumstix Overo boards (Tobi and Summit)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &dvi0;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
diff --git a/src/arm/omap3-overo-common-lcd35.dtsi b/src/arm/omap3-overo-common-lcd35.dtsi
deleted file mode 100644
index 233c69e50ae3..000000000000
--- a/src/arm/omap3-overo-common-lcd35.dtsi
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lb035_pins: pinmux_lb035_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
-
-		default-on;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	lcd0: display@0 {
-		compatible = "lgphilips,lb035q02";
-		label = "lcd";
-
-		reg = <1>;					/* CS1 */
-		spi-max-frequency = <10000000>;
-		spi-cpol;
-		spi-cpha;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lb035_pins>;
-		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		linux,wakeup;
-	};
-};
diff --git a/src/arm/omap3-overo-common-lcd43.dtsi b/src/arm/omap3-overo-common-lcd43.dtsi
deleted file mode 100644
index f5395b7da912..000000000000
--- a/src/arm/omap3-overo-common-lcd43.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lte430_pins: pinmux_lte430_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	lcd0: display@0 {
-		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lte430_pins>;
-		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <9200000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vback-porch = <2>;
-			vfront-porch = <4>;
-			vsync-len = <10>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
-
-		default-on;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		linux,wakeup;
-	};
-};
-
diff --git a/src/arm/omap3-overo-common-peripherals.dtsi b/src/arm/omap3-overo-common-peripherals.dtsi
deleted file mode 100644
index 5831bcc52966..000000000000
--- a/src/arm/omap3-overo-common-peripherals.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
- */
-
-/ {
-	lis33_3v3: lis33-3v3-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "lis33-3v3-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	lis33_1v8: lis33-1v8-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "lis33-1v8-reg";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-};
-
-&omap3_pmx_core {
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <100000>;
-
-	/* optional 1K EEPROM with revision information */
-	eeprom@51 {
-		compatible = "atmel,24c01";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-
-	lis33de: lis33de@1d {
-		compatible = "st,lis33de", "st,lis3lv02d";
-		reg = <0x1d>;
-		Vdd-supply = <&lis33_1v8>;
-		Vdd_IO-supply = <&lis33_3v3>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
diff --git a/src/arm/omap3-overo-gallop43-common.dtsi b/src/arm/omap3-overo-gallop43-common.dtsi
deleted file mode 100644
index 49d2254a99b0..000000000000
--- a/src/arm/omap3-overo-gallop43-common.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@23 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
-		};
-		button1@14 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&usbhshost {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-gallop43.dts b/src/arm/omap3-overo-gallop43.dts
deleted file mode 100644
index 241f5c1914e0..000000000000
--- a/src/arm/omap3-overo-gallop43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-gallop43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-palo43-common.dtsi b/src/arm/omap3-overo-palo43-common.dtsi
deleted file mode 100644
index 087aedf5b902..000000000000
--- a/src/arm/omap3-overo-palo43-common.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@23 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
-		};
-		button1@14 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
diff --git a/src/arm/omap3-overo-palo43.dts b/src/arm/omap3-overo-palo43.dts
deleted file mode 100644
index cedb103b4b66..000000000000
--- a/src/arm/omap3-overo-palo43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-palo43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-alto35.dts b/src/arm/omap3-overo-storm-alto35.dts
deleted file mode 100644
index e9cae52afc25..000000000000
--- a/src/arm/omap3-overo-storm-alto35.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-alto35-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
diff --git a/src/arm/omap3-overo-storm-chestnut43.dts b/src/arm/omap3-overo-storm-chestnut43.dts
deleted file mode 100644
index 7d82fdfd9909..000000000000
--- a/src/arm/omap3-overo-storm-chestnut43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-chestnut43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-gallop43.dts b/src/arm/omap3-overo-storm-gallop43.dts
deleted file mode 100644
index a1b57e0cf37f..000000000000
--- a/src/arm/omap3-overo-storm-gallop43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-gallop43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-palo43.dts b/src/arm/omap3-overo-storm-palo43.dts
deleted file mode 100644
index b585d8fbc347..000000000000
--- a/src/arm/omap3-overo-storm-palo43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-palo43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-summit.dts b/src/arm/omap3-overo-storm-summit.dts
deleted file mode 100644
index a0d7fd8369d7..000000000000
--- a/src/arm/omap3-overo-storm-summit.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-summit-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-tobi.dts b/src/arm/omap3-overo-storm-tobi.dts
deleted file mode 100644
index 879383acad87..000000000000
--- a/src/arm/omap3-overo-storm-tobi.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-tobi-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
diff --git a/src/arm/omap3-overo-storm.dtsi b/src/arm/omap3-overo-storm.dtsi
deleted file mode 100644
index 6cb418b4124a..000000000000
--- a/src/arm/omap3-overo-storm.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap36xx.dtsi"
-#include "omap3-overo-base.dtsi"
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-summit-common.dtsi b/src/arm/omap3-overo-summit-common.dtsi
deleted file mode 100644
index 0ac97ba98549..000000000000
--- a/src/arm/omap3-overo-summit-common.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-dvi.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-summit.dts b/src/arm/omap3-overo-summit.dts
deleted file mode 100644
index 69765609455a..000000000000
--- a/src/arm/omap3-overo-summit.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-summit-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-tobi-common.dtsi b/src/arm/omap3-overo-tobi-common.dtsi
deleted file mode 100644
index 9e24b6a1d07b..000000000000
--- a/src/arm/omap3-overo-tobi-common.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-dvi.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-#include "omap-gpmc-smsc9221.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-tobi.dts b/src/arm/omap3-overo-tobi.dts
deleted file mode 100644
index fd6400efcdee..000000000000
--- a/src/arm/omap3-overo-tobi.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-tobi-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
diff --git a/src/arm/omap3-overo.dtsi b/src/arm/omap3-overo.dtsi
deleted file mode 100644
index 69ca7c45bca2..000000000000
--- a/src/arm/omap3-overo.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap34xx.dtsi"
-#include "omap3-overo-base.dtsi"
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
-		>;
-	};
-};
-
-&mcbsp2 {
-	status = "okay";
-};
diff --git a/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi b/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
deleted file mode 100644
index f4b1a61853e3..000000000000
--- a/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Common file for omap dpi panels with QVGA and reset pins
- *
- * Note that the board specifc DTS file needs to specify
- * at minimum the GPIO enable-gpios for display, and
- * gpios for gpio-backlight.
- */
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	backlight0: backlight {
-		compatible = "gpio-backlight";
-		default-on;
-	};
-
-	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
-	lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	lcd0: display {
-		compatible = "sharp,ls037v7dw01";
-		label = "lcd";
-		power-supply = <&lcd_3v3>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <18>;
-		};
-	};
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		reg = <0>;			/* CS0 */
-		compatible = "ti,tsc2046";
-		spi-max-frequency = <1000000>;
-		vcc-supply = <&lcd_3v3>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <8000>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <4800>;
-		ti,x-plate-ohms = /bits/ 16 <40>;
-		ti,pressure-max = /bits/ 16 <255>;
-		ti,swap-xy;
-		linux,wakeup;
-	};
-};
diff --git a/src/arm/omap3-sb-t35.dtsi b/src/arm/omap3-sb-t35.dtsi
deleted file mode 100644
index d59e3de1441e..000000000000
--- a/src/arm/omap3-sb-t35.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
- */
-
-&omap3_pmx_core {
-	smsc2_pins: pinmux_smsc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
-			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <4 0 0x2d000000 0x01000000>;
-
-	smsc2: ethernet@4,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc2_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		reg = <4 0 0xff>;
-		bank-width = <2>;
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <1>;
-		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/src/arm/omap3-sbc-t3517.dts b/src/arm/omap3-sbc-t3517.dts
deleted file mode 100644
index 42189b65d393..000000000000
--- a/src/arm/omap3-sbc-t3517.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T3517 with CM-T3517
- */
-
-#include "omap3-cm-t3517.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3517 with CM-T3517";
-	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
-
-	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
-	vddvario: regulator-vddvario-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&sb_t35_usb_hub_pins
-			&usb_hub_pins
-		    >;
-
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
-		>;
-	};
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc1_pins
-		&mmc1_aux_pins
-	>;
-
-	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
-	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
-};
diff --git a/src/arm/omap3-sbc-t3530.dts b/src/arm/omap3-sbc-t3530.dts
deleted file mode 100644
index bbbeea6b1988..000000000000
--- a/src/arm/omap3-sbc-t3530.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T3530 with CM-T3530
- */
-
-#include "omap3-cm-t3530.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3530 with CM-T3530";
-	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sb_t35_usb_hub_pins>;
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-/*
- * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
- * SB-T35 baseboard respectively.
- * This setting includes both chips in SBC-T3530 board device tree.
- */
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>,
-		 <4 0 0x2d000000 0x01000000>;
-};
-
-&mmc1 {
-	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
-};
diff --git a/src/arm/omap3-sbc-t3730.dts b/src/arm/omap3-sbc-t3730.dts
deleted file mode 100644
index 08e4a7086f22..000000000000
--- a/src/arm/omap3-sbc-t3730.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T3730 with CM-T3730
- */
-
-#include "omap3-cm-t3730.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3730 with CM-T3730";
-	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sb_t35_usb_hub_pins>;
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>,
-		 <4 0 0x2d000000 0x01000000>;
-};
diff --git a/src/arm/omap3-zoom3.dts b/src/arm/omap3-zoom3.dts
deleted file mode 100644
index 6644f516a42b..000000000000
--- a/src/arm/omap3-zoom3.dts
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap-zoom-common.dtsi"
-
-/ {
-	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 0>;	/* gpio101 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	/* REVISIT: twl gpio0 is mmc0_cd */
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
-                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	mmc3_2_pins: pinmux_mmc3_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
-		pinctrl-single,pins = <
-			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-/*
-&mmc2 {
-	vmmc-supply = <&vmmc2>;
-	ti,non-removable;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-*/
-&mmc3 {
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-       status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
diff --git a/src/arm/omap3.dtsi b/src/arm/omap3.dtsi
deleted file mode 100644
index 575a49bf968d..000000000000
--- a/src/arm/omap3.dtsi
+++ /dev/null
@@ -1,810 +0,0 @@
-/*
- * Device Tree Source for OMAP3 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap3430", "ti,omap3";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0x0>;
-
-			clocks = <&dpll1_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		reg = <0x54000000 0x800000>;
-		interrupts = <3>;
-		ti,hwmods = "debugss";
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-
-		iva: iva {
-			compatible = "ti,iva2.2";
-			ti,hwmods = "iva";
-
-			dsp {
-				compatible = "ti,omap3-c64";
-			};
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP3 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		reg = <0x68000000 0x10000>;
-		interrupts = <9 10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		aes: aes@480c5000 {
-			compatible = "ti,omap3-aes";
-			ti,hwmods = "aes";
-			reg = <0x480c5000 0x50>;
-			interrupts = <0>;
-		};
-
-		prm: prm@48306000 {
-			compatible = "ti,omap3-prm";
-			reg = <0x48306000 0x4000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		cm: cm@48004000 {
-			compatible = "ti,omap3-cm";
-			reg = <0x48004000 0x4000>;
-
-			cm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@48002000 {
-			compatible = "ti,omap3-scrm";
-			reg = <0x48002000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@48320000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x48320000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <96>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <96>;
-		};
-
-		omap3_pmx_core: pinmux@48002030 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002030 0x0238>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_pmx_wkup: pinmux@48002a00 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002a00 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_scm_general: tisyscon@48002270 {
-			compatible = "syscon";
-			reg = <0x48002270 0x2f0>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x2b0 0x4>;
-			syscon = <&omap3_scm_general>;
-			pbias_mmc_reg: pbias_mmc_omap2430 {
-				regulator-name = "pbias_mmc_omap2430";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		gpio1: gpio@48310000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x48310000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@49050000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49050000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@49052000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49052000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@49054000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49054000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@49056000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49056000 0x200>;
-			interrupts = <33>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@49058000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49058000 0x200>;
-			interrupts = <34>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x4806a000 0x2000>;
-			interrupts-extended = <&intc 72>;
-			dmas = <&sdma 49 &sdma 50>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x4806c000 0x400>;
-			interrupts-extended = <&intc 73>;
-			dmas = <&sdma 51 &sdma 52>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@49020000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x49020000 0x400>;
-			interrupts-extended = <&intc 74>;
-			dmas = <&sdma 53 &sdma 54>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48070000 0x80>;
-			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48072000 0x80>;
-			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48060000 0x80>;
-			interrupts = <61>;
-			dmas = <&sdma 25 &sdma 26>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap3-mailbox";
-			ti,hwmods = "mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-			ti,mbox-num-users = <2>;
-			ti,mbox-num-fifos = <2>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x48098000 0x100>;
-			interrupts = <65>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x4809a000 0x100>;
-			interrupts = <66>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x480b8000 0x100>;
-			interrupts = <91>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>,
-			       <&sdma 16>,
-			       <&sdma 23>,
-			       <&sdma 24>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x480ba000 0x100>;
-			interrupts = <48>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		hdqw1w: 1w@480b2000 {
-			compatible = "ti,omap3-1w";
-			reg = <0x480b2000 0x1000>;
-			interrupts = <58>;
-			ti,hwmods = "hdq1w";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x4809c000 0x200>;
-			interrupts = <83>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x480b4000 0x200>;
-			interrupts = <86>;
-			ti,hwmods = "mmc2";
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x480ad000 0x200>;
-			interrupts = <94>;
-			ti,hwmods = "mmc3";
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmu_isp: mmu@480bd400 {
-			compatible = "ti,omap2-iommu";
-			reg = <0x480bd400 0x80>;
-			interrupts = <24>;
-			ti,hwmods = "mmu_isp";
-			ti,#tlb-entries = <8>;
-		};
-
-		mmu_iva: mmu@5d000000 {
-			compatible = "ti,omap2-iommu";
-			reg = <0x5d000000 0x80>;
-			interrupts = <28>;
-			ti,hwmods = "mmu_iva";
-			status = "disabled";
-		};
-
-		wdt2: wdt@48314000 {
-			compatible = "ti,omap3-wdt";
-			reg = <0x48314000 0x80>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <16>, /* OCP compliant interrupt */
-				     <59>, /* TX interrupt */
-				     <60>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@49022000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49022000 0xff>,
-			      <0x49028000 0xff>;
-			reg-names = "mpu", "sidetone";
-			interrupts = <17>, /* OCP compliant interrupt */
-				     <62>, /* TX interrupt */
-				     <63>, /* RX interrupt */
-				     <4>;  /* Sidetone */
-			interrupt-names = "common", "tx", "rx", "sidetone";
-			ti,buffer-size = <1280>;
-			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@49024000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49024000 0xff>,
-			      <0x4902a000 0xff>;
-			reg-names = "mpu", "sidetone";
-			interrupts = <22>, /* OCP compliant interrupt */
-				     <89>, /* TX interrupt */
-				     <90>, /* RX interrupt */
-				     <5>;  /* Sidetone */
-			interrupt-names = "common", "tx", "rx", "sidetone";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@49026000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49026000 0xff>;
-			reg-names = "mpu";
-			interrupts = <23>, /* OCP compliant interrupt */
-				     <54>, /* TX interrupt */
-				     <55>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp5: mcbsp@48096000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x48096000 0xff>;
-			reg-names = "mpu";
-			interrupts = <27>, /* OCP compliant interrupt */
-				     <81>, /* TX interrupt */
-				     <82>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp5";
-			dmas = <&sdma 21>,
-			       <&sdma 22>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		sham: sham@480c3000 {
-			compatible = "ti,omap3-sham";
-			ti,hwmods = "sham";
-			reg = <0x480c3000 0x64>;
-			interrupts = <49>;
-		};
-
-		smartreflex_core: smartreflex@480cb000 {
-			compatible = "ti,omap3-smartreflex-core";
-			ti,hwmods = "smartreflex_core";
-			reg = <0x480cb000 0x400>;
-			interrupts = <19>;
-		};
-
-		smartreflex_mpu_iva: smartreflex@480c9000 {
-			compatible = "ti,omap3-smartreflex-iva";
-			ti,hwmods = "smartreflex_mpu_iva";
-			reg = <0x480c9000 0x400>;
-			interrupts = <18>;
-		};
-
-		timer1: timer@48318000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48318000 0x400>;
-			interrupts = <37>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@49032000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49032000 0x400>;
-			interrupts = <38>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@49034000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49034000 0x400>;
-			interrupts = <39>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@49036000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49036000 0x400>;
-			interrupts = <40>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@49038000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49038000 0x400>;
-			interrupts = <41>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4903a000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903a000 0x400>;
-			interrupts = <42>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@4903c000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903c000 0x400>;
-			interrupts = <43>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@4903e000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903e000 0x400>;
-			interrupts = <44>;
-			ti,hwmods = "timer8";
-			ti,timer-pwm;
-			ti,timer-dsp;
-		};
-
-		timer9: timer@49040000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49040000 0x400>;
-			interrupts = <45>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48086000 0x400>;
-			interrupts = <46>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48088000 0x400>;
-			interrupts = <47>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer12: timer@48304000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48304000 0x400>;
-			interrupts = <95>;
-			ti,hwmods = "timer12";
-			ti,timer-alwon;
-			ti,timer-secure;
-		};
-
-		usbhstll: usbhstll@48062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x48062000 0x1000>;
-			interrupts = <78>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@48064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x48064000 0x400>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbhsohci: ohci@48064400 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x48064400 0x400>;
-				interrupt-parent = <&intc>;
-				interrupts = <76>;
-			};
-
-			usbhsehci: ehci@48064800 {
-				compatible = "ti,ehci-omap";
-				reg = <0x48064800 0x400>;
-				interrupt-parent = <&intc>;
-				interrupts = <77>;
-			};
-		};
-
-		gpmc: gpmc@6e000000 {
-			compatible = "ti,omap3430-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x6e000000 0x02d0>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
-		usb_otg_hs: usb_otg_hs@480ab000 {
-			compatible = "ti,omap3-musb";
-			reg = <0x480ab000 0x1000>;
-			interrupts = <92>, <93>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
-		};
-
-		dss: dss@48050000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x48050000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss1_alwon_fck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@48050400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x48050400 0x400>;
-				interrupts = <25>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss1_alwon_fck>;
-				clock-names = "fck";
-			};
-
-			dsi: encoder@4804fc00 {
-				compatible = "ti,omap3-dsi";
-				reg = <0x4804fc00 0x200>,
-				      <0x4804fe00 0x40>,
-				      <0x4804ff00 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <25>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			rfbi: encoder@48050800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x48050800 0x100>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-				clocks = <&dss1_alwon_fck>, <&dss_ick>;
-				clock-names = "fck", "ick";
-			};
-
-			venc: encoder@48050c00 {
-				compatible = "ti,omap3-venc";
-				reg = <0x48050c00 0x100>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-				clocks = <&dss_tv_fck>;
-				clock-names = "fck";
-			};
-		};
-
-		ssi: ssi-controller@48058000 {
-			compatible = "ti,omap3-ssi";
-			ti,hwmods = "ssi";
-
-			status = "disabled";
-
-			reg = <0x48058000 0x1000>,
-			      <0x48059000 0x1000>;
-			reg-names = "sys",
-				    "gdd";
-
-			interrupts = <71>;
-			interrupt-names = "gdd_mpu";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			ssi_port1: ssi-port@4805a000 {
-				compatible = "ti,omap3-ssi-port";
-
-				reg = <0x4805a000 0x800>,
-				      <0x4805a800 0x800>;
-				reg-names = "tx",
-					    "rx";
-
-				interrupt-parent = <&intc>;
-				interrupts = <67>,
-					     <68>;
-			};
-
-			ssi_port2: ssi-port@4805b000 {
-				compatible = "ti,omap3-ssi-port";
-
-				reg = <0x4805b000 0x800>,
-				      <0x4805b800 0x800>;
-				reg-names = "tx",
-					    "rx";
-
-				interrupt-parent = <&intc>;
-				interrupts = <69>,
-					     <70>;
-			};
-		};
-	};
-};
-
-/include/ "omap3xxx-clocks.dtsi"
diff --git a/src/arm/omap3430-sdp.dts b/src/arm/omap3430-sdp.dts
deleted file mode 100644
index 02f69f4a8fd3..000000000000
--- a/src/arm/omap3430-sdp.dts
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TI OMAP3430 SDP";
-	compatible = "ti,omap3430-sdp", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	/*
-	 * S6-3 must be in ON position for 8 bit mode to function
-	 * Else, use 4 bit mode
-	 */
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&gpmc {
-	ranges = <0 0 0x10000000 0x08000000>,
-		 <1 0 0x28000000 0x08000000>,
-		 <2 0 0x20000000 0x10000000>;
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name= "intel,pf48f6000m0y1be";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x08000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		partition@0 {
-			label = "bootloader-nor";
-			reg = <0 0x40000>;
-		};
-		partition@40000 {
-			label = "params-nor";
-			reg = <0x40000 0x40000>;
-		};
-		partition@80000 {
-			label = "kernel-nor";
-			reg = <0x80000 0x200000>;
-		};
-		partition@280000 {
-			label = "filesystem-nor";
-			reg = <0x240000 0x7d80000>;
-		};
-	};
-
-	nand@1,0 {
-		linux,mtd-name= "micron,mt29f1g08abb";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <1 0 0x08000000>;
-		ti,nand-ecc-opt = "ham1";
-		nand-bus-width = <8>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <36>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <24>;
-		gpmc,adv-wr-off-ns = <36>;
-		gpmc,oe-on-ns = <6>;
-		gpmc,oe-off-ns = <48>;
-		gpmc,we-on-ns = <6>;
-		gpmc,we-off-ns = <30>;
-		gpmc,rd-cycle-ns = <72>;
-		gpmc,wr-cycle-ns = <72>;
-		gpmc,access-ns = <54>;
-		gpmc,wr-access-ns = <30>;
-
-		partition@0 {
-			label = "xloader-nand";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "bootloader-nand";
-			reg = <0x80000 0x140000>;
-		};
-		partition@1c0000 {
-			label = "params-nand";
-			reg = <0x1c0000 0xc0000>;
-		};
-		partition@280000 {
-			label = "kernel-nand";
-			reg = <0x280000 0x500000>;
-		};
-		partition@780000 {
-			label = "filesystem-nand";
-			reg = <0x780000 0x7880000>;
-		};
-	};
-
-	onenand@2,0 {
-		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <2 0 0x10000000>;
-
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <84>;
-		gpmc,cs-wr-off-ns = <72>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <18>;
-		gpmc,oe-on-ns = <30>;
-		gpmc,oe-off-ns = <84>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <42>;
-		gpmc,rd-cycle-ns = <108>;
-		gpmc,wr-cycle-ns = <96>;
-		gpmc,access-ns = <78>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-
-		partition@0 {
-			label = "xloader-onenand";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "bootloader-onenand";
-			reg = <0x80000 0x40000>;
-		};
-		partition@c0000 {
-			label = "params-onenand";
-			reg = <0xc0000 0x20000>;
-		};
-		partition@e0000 {
-			label = "kernel-onenand";
-			reg = <0xe0000 0x200000>;
-		};
-		partition@2e0000 {
-			label = "filesystem-onenand";
-			reg = <0x2e0000 0xfd20000>;
-		};
-	};
-};
diff --git a/src/arm/omap3430es1-clocks.dtsi b/src/arm/omap3430es1-clocks.dtsi
deleted file mode 100644
index 4c22f3a7f813..000000000000
--- a/src/arm/omap3430es1-clocks.dtsi
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Device Tree Source for OMAP3430 ES1 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	gfx_l3_ck: gfx_l3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0b10>;
-		ti,bit-shift = <0>;
-	};
-
-	gfx_l3_fck: gfx_l3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,max-div = <7>;
-		reg = <0x0b40>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_l3_ick: gfx_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&gfx_l3_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gfx_cg1_ck: gfx_cg1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <1>;
-	};
-
-	gfx_cg2_ck: gfx_cg2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <2>;
-	};
-
-	d2d_26m_fck: d2d_26m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <3>;
-	};
-
-	fshostusb_fck: fshostusb_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <5>;
-	};
-
-	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	fac_ick: fac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <8>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ssi_ick: ssi_ick_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <5>;
-		reg = <0x0a10>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <4>;
-		ti,max-div = <1>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	usb_l4_ick: usb_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-	};
-
-	dss1_alwon_fck: dss1_alwon_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
-	};
-
-	dss_ick: dss_ick_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0e10>;
-		ti,bit-shift = <0>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
-	};
-
-	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck>, <&dss_ick>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&d2d_26m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
-	};
-};
diff --git a/src/arm/omap34xx-hs.dtsi b/src/arm/omap34xx-hs.dtsi
deleted file mode 100644
index 1ff626489546..000000000000
--- a/src/arm/omap34xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap34xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
-	status = "disabled";
-};
-
-&sham {
-	status = "disabled";
-};
-
-&timer12 {
-	status = "disabled";
-};
diff --git a/src/arm/omap34xx-omap36xx-clocks.dtsi b/src/arm/omap34xx-omap36xx-clocks.dtsi
deleted file mode 100644
index b02017b7630e..000000000000
--- a/src/arm/omap34xx-omap36xx-clocks.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Device Tree Source for OMAP34XX/OMAP36XX clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	security_l4_ick2: security_l4_ick2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes1_ick: aes1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		ti,bit-shift = <3>;
-		reg = <0x0a14>;
-	};
-
-	rng_ick: rng_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <2>;
-	};
-
-	sha11_ick: sha11_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <1>;
-	};
-
-	des1_ick: des1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <0>;
-	};
-
-	cam_mclk: cam_mclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0f00>;
-		ti,set-rate-parent;
-	};
-
-	cam_ick: cam_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0f10>;
-		ti,bit-shift = <0>;
-	};
-
-	csi2_96m_fck: csi2_96m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0f00>;
-		ti,bit-shift = <1>;
-	};
-
-	security_l3_ick: security_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pka_ick: pka_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l3_ick>;
-		reg = <0x0a14>;
-		ti,bit-shift = <4>;
-	};
-
-	icr_ick: icr_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <29>;
-	};
-
-	des2_ick: des2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <26>;
-	};
-
-	mspro_ick: mspro_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	mailboxes_ick: mailboxes_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <7>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sr1_fck: sr1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <6>;
-	};
-
-	sr2_fck: sr2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <7>;
-	};
-
-	sr_l4_ick: sr_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll2_fck: dpll2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0040>;
-		ti,index-starts-at-one;
-	};
-
-	dpll2_ck: dpll2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll2_fck>;
-		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
-		ti,low-power-stop;
-		ti,lock;
-		ti,low-power-bypass;
-	};
-
-	dpll2_m2_ck: dpll2_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0044>;
-		ti,index-starts-at-one;
-	};
-
-	iva2_ck: iva2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&dpll2_m2_ck>;
-		reg = <0x0000>;
-		ti,bit-shift = <0>;
-	};
-
-	modem_fck: modem_fck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <31>;
-	};
-
-	sad2d_ick: sad2d_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <3>;
-	};
-
-	mad2d_ick: mad2d_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <3>;
-	};
-
-	mspro_fck: mspro_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	cam_clkdm: cam_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_ick>, <&csi2_96m_fck>;
-	};
-
-	iva2_clkdm: iva2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&iva2_ck>;
-	};
-
-	dpll2_clkdm: dpll2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll2_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
-			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
-			 <&mspro_fck>;
-	};
-};
diff --git a/src/arm/omap34xx.dtsi b/src/arm/omap34xx.dtsi
deleted file mode 100644
index 3819c1e91591..000000000000
--- a/src/arm/omap34xx.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Device Tree Source for OMAP34xx/OMAP35xx SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			/* OMAP343x/OMAP35xx variants OPP1-5 */
-			operating-points = <
-				/* kHz    uV */
-				125000   975000
-				250000  1075000
-				500000  1200000
-				550000  1270000
-				600000  1350000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-		};
-	};
-
-	ocp {
-		omap3_pmx_core2: pinmux@480025d8 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025d8 0x24>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-	};
-};
-
-&ssi {
-	status = "ok";
-
-	clocks = <&ssi_ssr_fck>,
-		 <&ssi_sst_fck>,
-		 <&ssi_ick>;
-	clock-names = "ssi_ssr_fck",
-		      "ssi_sst_fck",
-		      "ssi_ick";
-};
-
-/include/ "omap34xx-omap36xx-clocks.dtsi"
-/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
deleted file mode 100644
index 080fb3f4e429..000000000000
--- a/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	corex2_d3_fck: corex2_d3_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&corex2_fck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	corex2_d5_fck: corex2_d5_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&corex2_fck>;
-		clock-mult = <1>;
-		clock-div = <5>;
-	};
-};
-&cm_clocks {
-	dpll5_ck: dpll5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
-		ti,low-power-stop;
-		ti,lock;
-	};
-
-	dpll5_m2_ck: dpll5_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll5_ck>;
-		ti,max-div = <31>;
-		reg = <0x0d50>;
-		ti,index-starts-at-one;
-	};
-
-	sgx_gate_fck: sgx_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0b00>;
-	};
-
-	core_d3_ck: core_d3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	core_d4_ck: core_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	core_d6_ck: core_d6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <6>;
-	};
-
-	omap_192m_alwon_fck: omap_192m_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_d2_ck: core_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	sgx_mux_fck: sgx_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
-		reg = <0x0b40>;
-	};
-
-	sgx_fck: sgx_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
-	};
-
-	sgx_ick: sgx_ick {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0b10>;
-		ti,bit-shift = <0>;
-	};
-
-	cpefuse_fck: cpefuse_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <0>;
-	};
-
-	ts_fck: ts_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_32k_fck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <1>;
-	};
-
-	usbtll_fck: usbtll_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&dpll5_m2_ck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <2>;
-	};
-
-	usbtll_ick: usbtll_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <2>;
-	};
-
-	mmchs3_ick: mmchs3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <30>;
-	};
-
-	mmchs3_fck: mmchs3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <30>;
-	};
-
-	dss1_alwon_fck: dss1_alwon_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
-	};
-
-	dss_ick: dss_ick_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dss-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0e10>;
-		ti,bit-shift = <0>;
-	};
-
-	usbhost_120m_fck: usbhost_120m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll5_m2_ck>;
-		reg = <0x1400>;
-		ti,bit-shift = <1>;
-	};
-
-	usbhost_48m_fck: usbhost_48m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&omap_48m_fck>;
-		reg = <0x1400>;
-		ti,bit-shift = <0>;
-	};
-
-	usbhost_ick: usbhost_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dss-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x1410>;
-		ti,bit-shift = <0>;
-	};
-};
-
-&cm_clockdomains {
-	dpll5_clkdm: dpll5_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll5_ck>;
-	};
-
-	sgx_clkdm: sgx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sgx_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck>, <&dss_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
-	};
-
-	usbhost_clkdm: usbhost_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
-			 <&usbhost_ick>;
-	};
-};
diff --git a/src/arm/omap36xx-clocks.dtsi b/src/arm/omap36xx-clocks.dtsi
deleted file mode 100644
index 200ae3a5cbbb..000000000000
--- a/src/arm/omap36xx-clocks.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Device Tree Source for OMAP36xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	dpll4_ck: dpll4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-per-j-type-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
-	};
-
-	dpll4_m5x2_ck: dpll4_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m5x2_mul_ck>;
-		ti,bit-shift = <0x1e>;
-		reg = <0x0d00>;
-		ti,set-rate-parent;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll3_m3x2_ck: dpll3_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll3_m3x2_mul_ck>;
-		ti,bit-shift = <0xc>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m3x2_ck: dpll4_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m3x2_mul_ck>;
-		ti,bit-shift = <0x1c>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m6x2_ck: dpll4_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m6x2_mul_ck>;
-		ti,bit-shift = <0x1f>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	uart4_fck: uart4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <18>;
-	};
-};
-
-&dpll4_m2x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&dpll4_m3x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&dpll4_m4x2_mul_ck {
-	ti,clock-mult = <1>;
-};
-
-&dpll4_m5x2_mul_ck {
-	ti,clock-mult = <1>;
-};
-
-&dpll4_m6x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&cm_clockdomains {
-	dpll4_clkdm: dpll4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll4_ck>;
-	};
-
-	per_clkdm: per_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
-			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
-			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
-			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
-			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
-			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
-			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>, <&uart4_fck>;
-	};
-};
diff --git a/src/arm/omap36xx-hs.dtsi b/src/arm/omap36xx-hs.dtsi
deleted file mode 100644
index 2c7febb0e016..000000000000
--- a/src/arm/omap36xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap36xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
-	status = "disabled";
-};
-
-&sham {
-	status = "disabled";
-};
-
-&timer12 {
-	status = "disabled";
-};
diff --git a/src/arm/omap36xx-omap3430es2plus-clocks.dtsi b/src/arm/omap36xx-omap3430es2plus-clocks.dtsi
deleted file mode 100644
index 877318c28364..000000000000
--- a/src/arm/omap36xx-omap3430es2plus-clocks.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Device Tree Source for OMAP34xx/OMAP36xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-hsotgusb-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ssi_ick: ssi_ick_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-ssi-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usim_gate_fck: usim_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&omap_96m_fck>;
-		ti,bit-shift = <9>;
-		reg = <0x0c00>;
-	};
-
-	sys_d2_ck: sys_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d2_fck: omap_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d4_fck: omap_96m_d4_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	omap_96m_d8_fck: omap_96m_d8_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	omap_96m_d10_fck: omap_96m_d10_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <20>;
-	};
-
-	usim_mux_fck: usim_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	usim_fck: usim_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
-	};
-
-	usim_ick: usim_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <9>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&usim_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&ssi_ick>;
-	};
-};
diff --git a/src/arm/omap36xx.dtsi b/src/arm/omap36xx.dtsi
deleted file mode 100644
index 541704a59a5a..000000000000
--- a/src/arm/omap36xx.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Device Tree Source for OMAP3 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-	};
-
-	cpus {
-		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
-		cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				300000  1012500
-				600000  1200000
-				800000  1325000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-		};
-	};
-
-	ocp {
-		uart4: serial@49042000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x49042000 0x400>;
-			interrupts = <80>;
-			dmas = <&sdma 81 &sdma 82>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		abb_mpu_iva: regulator-abb-mpu {
-			compatible = "ti,abb-v1";
-			regulator-name = "abb_mpu_iva";
-			#address-cell = <0>;
-			#size-cells = <0>;
-			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
-			reg-names = "base-address", "int-address";
-			ti,tranxdone-status-mask = <0x4000000>;
-			clocks = <&sys_ck>;
-			ti,settling-time = <30>;
-			ti,clock-cycles = <8>;
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1012500		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1325000		0	0	0	0	0
-			1375000		1	0	0	0	0
-			>;
-		};
-
-		omap3_pmx_core2: pinmux@480025a0 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025a0 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-	};
-};
-
-/* OMAP3630 needs dss_96m_fck for VENC */
-&venc {
-	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
-	clock-names = "fck", "tv_dac_clk";
-};
-
-&ssi {
-	status = "ok";
-
-	clocks = <&ssi_ssr_fck>,
-		 <&ssi_sst_fck>,
-		 <&ssi_ick>;
-	clock-names = "ssi_ssr_fck",
-		      "ssi_sst_fck",
-		      "ssi_ick";
-};
-
-/include/ "omap34xx-omap36xx-clocks.dtsi"
-/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-clocks.dtsi"
diff --git a/src/arm/omap3xxx-clocks.dtsi b/src/arm/omap3xxx-clocks.dtsi
deleted file mode 100644
index e47ff69dcf70..000000000000
--- a/src/arm/omap3xxx-clocks.dtsi
+++ /dev/null
@@ -1,1663 +0,0 @@
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	virt_16_8m_ck: virt_16_8m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	osc_sys_ck: osc_sys_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
-		reg = <0x0d40>;
-	};
-
-	sys_ck: sys_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&osc_sys_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1270>;
-		ti,index-starts-at-one;
-	};
-
-	sys_clkout1: sys_clkout1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&osc_sys_ck>;
-		reg = <0x0d70>;
-		ti,bit-shift = <7>;
-	};
-
-	dpll3_x2_ck: dpll3_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m2x2_ck: dpll3_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_x2_ck: dpll4_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	corex2_fck: corex2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wkup_l4_ick: wkup_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-&scrm_clocks {
-	mcbsp5_mux_fck: mcbsp5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x02d8>;
-	};
-
-	mcbsp5_fck: mcbsp5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
-	};
-
-	mcbsp1_mux_fck: mcbsp1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x0274>;
-	};
-
-	mcbsp1_fck: mcbsp1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
-	};
-
-	mcbsp2_mux_fck: mcbsp2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x0274>;
-	};
-
-	mcbsp2_fck: mcbsp2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
-	};
-
-	mcbsp3_mux_fck: mcbsp3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x02d8>;
-	};
-
-	mcbsp3_fck: mcbsp3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
-	};
-
-	mcbsp4_mux_fck: mcbsp4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x02d8>;
-	};
-
-	mcbsp4_fck: mcbsp4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
-	};
-};
-&cm_clocks {
-	dummy_apb_pclk: dummy_apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	omap_32k_fck: omap_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12m_ck: virt_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13m_ck: virt_13m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_38_4m_ck: virt_38_4m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	dpll4_ck: dpll4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-per-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
-	};
-
-	dpll4_m2_ck: dpll4_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0d48>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	omap_96m_alwon_fck: omap_96m_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll3_ck: dpll3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-core-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
-	};
-
-	dpll3_m3_ck: dpll3_m3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <31>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m3x2_ck: dpll3_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll3_m3x2_mul_ck>;
-		ti,bit-shift = <0xc>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_core_alwon_ck: emu_core_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sys_altclk: sys_altclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	mcbsp_clks: mcbsp_clks {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	dpll3_m2_ck: dpll3_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <31>;
-		reg = <0x0d40>;
-		ti,index-starts-at-one;
-	};
-
-	core_ck: core_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll1_fck: dpll1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0940>;
-		ti,index-starts-at-one;
-	};
-
-	dpll1_ck: dpll1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll1_fck>;
-		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
-	};
-
-	dpll1_x2_ck: dpll1_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll1_x2m2_ck: dpll1_x2m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll1_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0944>;
-		ti,index-starts-at-one;
-	};
-
-	cm_96m_fck: cm_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	omap_96m_fck: omap_96m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0d40>;
-	};
-
-	dpll4_m3_ck: dpll4_m3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m3x2_ck: dpll4_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m3x2_mul_ck>;
-		ti,bit-shift = <0x1c>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	omap_54m_fck: omap_54m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0d40>;
-	};
-
-	cm_96m_d2_fck: cm_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cm_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_48m_fck: omap_48m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-		ti,bit-shift = <3>;
-		reg = <0x0d40>;
-	};
-
-	omap_12m_fck: omap_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll4_m4_ck: dpll4_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <32>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m4_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m4x2_ck: dpll4_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_mul_ck>;
-		ti,bit-shift = <0x1d>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5_ck: dpll4_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0f40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m5_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5x2_ck: dpll4_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_mul_ck>;
-		ti,bit-shift = <0x1e>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m6_ck: dpll4_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <63>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m6x2_ck: dpll4_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m6x2_mul_ck>;
-		ti,bit-shift = <0x1f>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_per_alwon_ck: emu_per_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clkout2_src_gate_ck: clkout2_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_mux_ck: clkout2_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_ck: clkout2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
-	};
-
-	sys_clkout2: sys_clkout2 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout2_src_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0d70>;
-		ti,index-power-of-two;
-	};
-
-	mpu_ck: mpu_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_x2m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	arm_fck: arm_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mpu_ck>;
-		reg = <0x0924>;
-		ti,max-div = <2>;
-	};
-
-	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mpu_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_ick: l3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	l4_ick: l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,bit-shift = <2>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	rm_ick: rm_ick {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <1>;
-		ti,max-div = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0a00>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0a40>;
-	};
-
-	gpt10_fck: gpt10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
-	};
-
-	gpt11_gate_fck: gpt11_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0a00>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0a40>;
-	};
-
-	gpt11_fck: gpt11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
-	};
-
-	core_96m_fck: core_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mmchs2_fck: mmchs2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_fck: mmchs1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <24>;
-	};
-
-	i2c3_fck: i2c3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_fck: i2c2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_fck: i2c1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <15>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <10>;
-		reg = <0x0a00>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <9>;
-		reg = <0x0a00>;
-	};
-
-	core_48m_fck: core_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcspi4_fck: mcspi4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_fck: mcspi3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_fck: mcspi2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_fck: mcspi1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <18>;
-	};
-
-	uart2_fck: uart2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_fck: uart1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <13>;
-	};
-
-	core_12m_fck: core_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_12m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdq_fck: hdq_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_12m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <22>;
-	};
-
-	core_l3_ick: core_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sdrc_ick: sdrc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpmc_fck: gpmc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_l4_ick: core_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mmchs2_ick: mmchs2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_ick: mmchs1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <24>;
-	};
-
-	hdq_ick: hdq_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <22>;
-	};
-
-	mcspi4_ick: mcspi4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_ick: mcspi3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_ick: mcspi2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_ick: mcspi1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <18>;
-	};
-
-	i2c3_ick: i2c3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_ick: i2c2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_ick: i2c1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <15>;
-	};
-
-	uart2_ick: uart2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_ick: uart1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <13>;
-	};
-
-	gpt11_ick: gpt11_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <12>;
-	};
-
-	gpt10_ick: gpt10_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <11>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <10>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <9>;
-	};
-
-	omapctrl_ick: omapctrl_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <6>;
-	};
-
-	dss_tv_fck: dss_tv_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_54m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss_96m_fck: dss_96m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_96m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss2_alwon_fck: dss2_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <1>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	gpt1_gate_fck: gpt1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c00>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x0c40>;
-	};
-
-	gpt1_fck: gpt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
-	};
-
-	aes2_ick: aes2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		ti,bit-shift = <28>;
-		reg = <0x0a10>;
-	};
-
-	wkup_32k_fck: wkup_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio1_dbck: gpio1_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <3>;
-	};
-
-	sha12_ick: sha12_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <27>;
-	};
-
-	wdt2_fck: wdt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt2_ick: wdt2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt1_ick: wdt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <4>;
-	};
-
-	gpio1_ick: gpio1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <3>;
-	};
-
-	omap_32ksync_ick: omap_32ksync_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <2>;
-	};
-
-	gpt12_ick: gpt12_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpt1_ick: gpt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <0>;
-	};
-
-	per_96m_fck: per_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_48m_fck: per_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	uart3_fck: uart3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <11>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1000>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x1040>;
-	};
-
-	gpt2_fck: gpt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
-	};
-
-	gpt3_gate_fck: gpt3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1000>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1040>;
-	};
-
-	gpt3_fck: gpt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
-	};
-
-	gpt4_gate_fck: gpt4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1000>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1040>;
-	};
-
-	gpt4_fck: gpt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
-	};
-
-	gpt5_gate_fck: gpt5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1000>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1040>;
-	};
-
-	gpt5_fck: gpt5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
-	};
-
-	gpt6_gate_fck: gpt6_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1000>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1040>;
-	};
-
-	gpt6_fck: gpt6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
-	};
-
-	gpt7_gate_fck: gpt7_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1000>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1040>;
-	};
-
-	gpt7_fck: gpt7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
-	};
-
-	gpt8_gate_fck: gpt8_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x1000>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1040>;
-	};
-
-	gpt8_fck: gpt8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
-	};
-
-	gpt9_gate_fck: gpt9_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1000>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1040>;
-	};
-
-	gpt9_fck: gpt9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
-	};
-
-	per_32k_alwon_fck: per_32k_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio6_dbck: gpio6_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_dbck: gpio5_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_dbck: gpio4_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_dbck: gpio3_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_dbck: gpio2_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_fck: wdt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <12>;
-	};
-
-	per_l4_ick: per_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio6_ick: gpio6_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_ick: gpio5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_ick: gpio4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_ick: gpio3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_ick: gpio2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_ick: wdt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <12>;
-	};
-
-	uart3_ick: uart3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <11>;
-	};
-
-	uart4_ick: uart4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <18>;
-	};
-
-	gpt9_ick: gpt9_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <10>;
-	};
-
-	gpt8_ick: gpt8_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <9>;
-	};
-
-	gpt7_ick: gpt7_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <8>;
-	};
-
-	gpt6_ick: gpt6_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <7>;
-	};
-
-	gpt5_ick: gpt5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <6>;
-	};
-
-	gpt4_ick: gpt4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <5>;
-	};
-
-	gpt3_ick: gpt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <4>;
-	};
-
-	gpt2_ick: gpt2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <3>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <0>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <1>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <2>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <0>;
-		reg = <0x1000>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <1>;
-		reg = <0x1000>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x1000>;
-	};
-
-	emu_src_mux_ck: emu_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		reg = <0x1140>;
-	};
-
-	emu_src_ck: emu_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clocks = <&emu_src_mux_ck>;
-	};
-
-	pclk_fck: pclk_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	pclkx2_fck: pclkx2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	atclk_fck: atclk_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	traceclk_src_fck: traceclk_src_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1140>;
-	};
-
-	traceclk_fck: traceclk_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&traceclk_src_fck>;
-		ti,bit-shift = <11>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	secure_32k_fck: secure_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpt12_fck: gpt12_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>;
-	};
-
-	dpll3_clkdm: dpll3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll3_ck>;
-	};
-
-	dpll1_clkdm: dpll1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll1_ck>;
-	};
-
-	per_clkdm: per_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
-			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
-			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
-			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
-			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
-			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
-			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>;
-	};
-
-	emu_clkdm: emu_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&emu_src_ck>;
-	};
-
-	dpll4_clkdm: dpll4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll4_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
-	};
-};
diff --git a/src/arm/omap4-cpu-thermal.dtsi b/src/arm/omap4-cpu-thermal.dtsi
deleted file mode 100644
index cb9458feb2e3..000000000000
--- a/src/arm/omap4-cpu-thermal.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Device Tree Source for OMAP4/5 SoC CPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpu_thermal: cpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
-
-        trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
-
-	cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
diff --git a/src/arm/omap4-duovero-parlor.dts b/src/arm/omap4-duovero-parlor.dts
deleted file mode 100644
index 6dc84d9f9b4c..000000000000
--- a/src/arm/omap4-duovero-parlor.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4-duovero.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "OMAP4430 Gumstix Duovero on Parlor";
-	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led0 {
-			label = "duovero:blue:led0";
-			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;	/* gpio_122 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@121 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
-			gpio-key,wakeup;
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "d";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-0 = <
-			&led_pins
-			&button_pins
-			&smsc_pins
-	>;
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	smsc_pins: pinmux_smsc_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
-			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
-			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <100000>;
-
-	/* optional 1K EEPROM with revision information */
-	eeprom@51 {
-		compatible = "atmel,24c01";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;			/* CS5 */
-
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
-
-		phy-mode = "mii";
-
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <50>;
-		gpmc,cs-wr-off-ns = <50>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <50>;
-		gpmc,we-on-ns = <15>;
-		gpmc,we-off-ns = <50>;
-		gpmc,rd-cycle-ns = <50>;
-		gpmc,wr-cycle-ns = <50>;
-		gpmc,access-ns = <50>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <35>;
-		gpmc,cycle2cycle-delay-ns = <35>;
-		gpmc,wr-data-mux-bus-ns = <35>;
-		gpmc,wr-access-ns = <50>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,sync-clk-ps = <20000>;
-	};
-};
-
-&dss {
-	status = "ok";
-};
-
-&hdmi {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-		};
-	};
-};
-
diff --git a/src/arm/omap4-duovero.dtsi b/src/arm/omap4-duovero.dtsi
deleted file mode 100644
index e860ccd9d09c..000000000000
--- a/src/arm/omap4-duovero.dtsi
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap443x.dtsi"
-
-/ {
-	model = "Gumstix Duovero";
-	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "DuoVero";
-
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias";
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&hsusb1phy_pins>;
-
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* regulator for w2cbw0015 on sdio5 */
-	w2cbw0015_vmmc: w2cbw0015_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&w2cbw0015_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "w2cbw0015";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6040_pins
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	hsusb1phy_pins: pinmux_hsusb1phy_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
-		>;
-	};
-
-	w2cbw0015_pins: pinmux_w2cbw0015_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
-			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
-			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
-		>;
-	};
-
-	mmc5_pins: pinmux_mmc5_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
-		>;
-	};
-};
-
-/* PMIC */
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-/* on-board bluetooth / WiFi module */
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	vmmc-supply = <&vmmc>;
-	ti,bus-width = <4>;
-	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-/* mmc3 is available to the expansion board */
-
-&mmc4 {
-	status = "disabled";
-};
-
-/* on-board WiFi module */
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc5_pins>;
-
-	vmmc-supply = <&w2cbw0015_vmmc>;
-	ti,bus-width = <4>;
-	ti,non-removable;
-	cap-power-off-card;
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
diff --git a/src/arm/omap4-panda-a4.dts b/src/arm/omap4-panda-a4.dts
deleted file mode 100644
index 133f1b74e8ae..000000000000
--- a/src/arm/omap4-panda-a4.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
diff --git a/src/arm/omap4-panda-common.dtsi b/src/arm/omap4-panda-common.dtsi
deleted file mode 100644
index 8cfa3c8a72b0..000000000000
--- a/src/arm/omap4-panda-common.dtsi
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "elpida_ecb240abacn.dtsi"
-
-/ {
-	model = "TI OMAP4 PandaBoard";
-	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &hdmi0;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&led_wkgpio_pins
-		>;
-
-		heartbeat {
-			label = "pandaboard::status1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "pandaboard::status2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "PandaBoard";
-
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 1 0>;	/* gpio_1 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		/*
-		 * boot-on is required along with always-on as the
-		 * regulator framework doesn't enable the regulator
-		 * if boot-on is not there.
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
-		vcc-supply = <&hsusb1_power>;
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder@1 {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@1 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_dpi_pins
-			&tfp410_pins
-			&dss_hdmi_pins
-			&tpd12s015_pins
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
-			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
-			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
-			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
-			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
-			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
-			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
-			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
-			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
-			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
-			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
-
-			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
-			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
-			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
-			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
-			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
-			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
-			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
-			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
-			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
-			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
-			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
-			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
-			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
-			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
-
-			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
-			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
-			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x84 (PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/*
-	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
-	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
-	 */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
-			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
-		pinctrl-single,pins = <
-			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
-		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* IRQ# = 7 */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* IRQ# = 119 */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in their EEPROM as EDID data.
-	 * The EEPROM is connected as I2C slave device.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&uart2 {
-	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-};
-
-&uart3 {
-	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-};
-
-&uart4 {
-	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&dss {
-	status = "ok";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "ok";
-	vdd-supply = <&vcxio>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/src/arm/omap4-panda-es.dts b/src/arm/omap4-panda-es.dts
deleted file mode 100644
index 816d1c95b592..000000000000
--- a/src/arm/omap4-panda-es.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4460.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
-&sound {
-	ti,model = "PandaBoardES";
-
-	/* Audio routing */
-	ti,audio-routing =
-		"Headset Stereophone", "HSOL",
-		"Headset Stereophone", "HSOR",
-		"Ext Spk", "HFL",
-		"Ext Spk", "HFR",
-		"Line Out", "AUXL",
-		"Line Out", "AUXR",
-		"AFML", "Line In",
-		"AFMR", "Line In";
-};
-
-/* PandaboardES has external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
-
-&omap4_pmx_core {
-	led_gpio_pins: gpio_led_pmx {
-		pinctrl-single,pins = <
-			0xb6 (PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
-		>;
-	};
-};
-
-&led_wkgpio_pins {
-	pinctrl-single,pins = <
-		0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-	>;
-};
-
-&leds {
-	pinctrl-0 = <
-		&led_gpio_pins
-		&led_wkgpio_pins
-	>;
-
-	heartbeat {
-		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-	};
-	mmc {
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio1 {
-	 ti,no-reset-on-init;
-};
diff --git a/src/arm/omap4-panda.dts b/src/arm/omap4-panda.dts
deleted file mode 100644
index 6189a8b77d7f..000000000000
--- a/src/arm/omap4-panda.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "omap4-panda-common.dtsi"
diff --git a/src/arm/omap4-sdp-es23plus.dts b/src/arm/omap4-sdp-es23plus.dts
deleted file mode 100644
index aad5dda0f469..000000000000
--- a/src/arm/omap4-sdp-es23plus.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "omap4-sdp.dts"
-
-/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
diff --git a/src/arm/omap4-sdp.dts b/src/arm/omap4-sdp.dts
deleted file mode 100644
index 3e1da43068f6..000000000000
--- a/src/arm/omap4-sdp.dts
+++ /dev/null
@@ -1,690 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "elpida_ecb240abacn.dtsi"
-
-/ {
-	model = "TI OMAP4 SDP board";
-	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &lcd1;
-		display2 = &hdmi0;
-	};
-
-	vdd_eth: fixedregulator-vdd-eth {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 16 0>;  /* gpio line 48 */
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	vbat: fixedregulator-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-		regulator-min-microvolt = <3750000>;
-		regulator-max-microvolt = <3750000>;
-		regulator-boot-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		debug0 {
-			label = "omap4:green:debug0";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
-		};
-
-		debug1 {
-			label = "omap4:green:debug1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
-		};
-
-		debug2 {
-			label = "omap4:green:debug2";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
-		};
-
-		debug3 {
-			label = "omap4:green:debug3";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
-		};
-
-		debug4 {
-			label = "omap4:green:debug4";
-			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
-		};
-
-		user1 {
-			label = "omap4:blue:user";
-			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
-		};
-
-		user2 {
-			label = "omap4:red:user";
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
-		};
-
-		user3 {
-			label = "omap4:green:user";
-			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
-		};
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-		kpad {
-			label = "omap4::keypad";
-			pwms = <&twl_pwm 0 7812500>;
-			max-brightness = <127>;
-		};
-
-		charging {
-			label = "omap4:green:chrg";
-			pwms = <&twl_pwmled 0 7812500>;
-			max-brightness = <255>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&twl_pwm 1 7812500>;
-		brightness-levels = <
-				0 10 20 30 40
-				50 60 70 80 90
-				100 110 120 127
-				>;
-		default-brightness-level = <13>;
-	};
-
-	sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "SDP4430";
-
-		ti,jack-detection = <1>;
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-		ti,dmic = <&dmic>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Earphone Spk", "EP",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"Vibrator", "VIBRAL",
-			"Vibrator", "VIBRAR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"MAINMIC", "Main Handset Mic",
-			"Main Handset Mic", "Main Mic Bias",
-			"SUBMIC", "Sub Handset Mic",
-			"Sub Handset Mic", "Main Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In",
-			"DMic", "Digital Mic",
-			"Digital Mic", "Digital Mic1 Bias";
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 22 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tpd12s015: encoder@0 {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "c";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_hdmi_pins
-			&tpd12s015_pins
-	>;
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
-			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
-		>;
-	};
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	dmic_pins: pinmux_dmic_pins {
-		pinctrl-single,pins = <
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
-			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
-			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
-			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
-			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
-			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
-			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
-		pinctrl-single,pins = <
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-
-		/* regulators for vibra motor */
-		vddvibl-supply = <&vbat>;
-		vddvibr-supply = <&vbat>;
-
-		vibra {
-			/* Vibra driver, motor resistance parameters */
-			ti,vibldrv-res = <8>;
-			ti,vibrdrv-res = <3>;
-			ti,viblmotor-res = <10>;
-			ti,vibrmotor-res = <10>;
-		};
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * Temperature Sensor
-	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
-	 */
-	tmp105@48 {
-		compatible = "ti,tmp105";
-		reg = <0x48>;
-	};
-
-	/*
-	 * Ambient Light Sensor
-	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
-	 */
-	bh1780@29 {
-		compatible = "rohm,bh1780";
-		reg = <0x29>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * 3-Axis Digital Compass
-	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
-	 */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5843";
-		reg = <0x1e>;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	eth@0 {
-		compatible = "ks8851";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
-		vdd-supply = <&vdd_eth>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux1>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <8>;
-	linux,keymap = <0x00000012	/* KEY_E */
-			0x00010013	/* KEY_R */
-			0x00020014	/* KEY_T */
-			0x00030066	/* KEY_HOME */
-			0x0004003f	/* KEY_F5 */
-			0x000500f0	/* KEY_UNKNOWN */
-			0x00060017	/* KEY_I */
-			0x0007002a	/* KEY_LEFTSHIFT */
-			0x01000020	/* KEY_D*/
-			0x01010021	/* KEY_F */
-			0x01020022	/* KEY_G */
-			0x010300e7	/* KEY_SEND */
-			0x01040040	/* KEY_F6 */
-			0x010500f0	/* KEY_UNKNOWN */
-			0x01060025	/* KEY_K */
-			0x0107001c	/* KEY_ENTER */
-			0x0200002d	/* KEY_X */
-			0x0201002e	/* KEY_C */
-			0x0202002f	/* KEY_V */
-			0x0203006b	/* KEY_END */
-			0x02040041	/* KEY_F7 */
-			0x020500f0	/* KEY_UNKNOWN */
-			0x02060034	/* KEY_DOT */
-			0x0207003a	/* KEY_CAPSLOCK */
-			0x0300002c	/* KEY_Z */
-			0x0301004e	/* KEY_KPLUS */
-			0x03020030	/* KEY_B */
-			0x0303003b	/* KEY_F1 */
-			0x03040042	/* KEY_F8 */
-			0x030500f0	/* KEY_UNKNOWN */
-			0x03060018	/* KEY_O */
-			0x03070039	/* KEY_SPACE */
-			0x04000011	/* KEY_W */
-			0x04010015	/* KEY_Y */
-			0x04020016	/* KEY_U */
-			0x0403003c	/* KEY_F2 */
-			0x04040073	/* KEY_VOLUMEUP */
-			0x040500f0	/* KEY_UNKNOWN */
-			0x04060026	/* KEY_L */
-			0x04070069	/* KEY_LEFT */
-			0x0500001f	/* KEY_S */
-			0x05010023	/* KEY_H */
-			0x05020024	/* KEY_J */
-			0x0503003d	/* KEY_F3 */
-			0x05040043	/* KEY_F9 */
-			0x05050072	/* KEY_VOLUMEDOWN */
-			0x05060032	/* KEY_M */
-			0x0507006a	/* KEY_RIGHT */
-			0x06000010	/* KEY_Q */
-			0x0601001e	/* KEY_A */
-			0x06020031	/* KEY_N */
-			0x0603009e	/* KEY_BACK */
-			0x0604000e	/* KEY_BACKSPACE */
-			0x060500f0	/* KEY_UNKNOWN */
-			0x06060019	/* KEY_P */
-			0x06070067	/* KEY_UP */
-			0x07000094	/* KEY_PROG1 */
-			0x07010095	/* KEY_PROG2 */
-			0x070200ca	/* KEY_PROG3 */
-			0x070300cb	/* KEY_PROG4 */
-			0x0704003e	/* KEY_F4 */
-			0x070500f0	/* KEY_UNKNOWN */
-			0x07060160	/* KEY_OK */
-			0x0707006c>;	/* KEY_DOWN */
-	linux,input-no-autorepeat;
-};
-
-&uart2 {
-	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&dmic {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dmic_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&dss {
-	status = "ok";
-};
-
-&dsi1 {
-	status = "ok";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: display {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		label = "lcd0";
-
-		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
-&dsi2 {
-	status = "ok";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi2_out_ep: endpoint {
-			remote-endpoint = <&lcd1_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd1: display {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		label = "lcd1";
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
-
-		port {
-			lcd1_in: endpoint {
-				remote-endpoint = <&dsi2_out_ep>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/src/arm/omap4-var-dvk-om44.dts b/src/arm/omap4-var-dvk-om44.dts
deleted file mode 100644
index 458d79fa378b..000000000000
--- a/src/arm/omap4-var-dvk-om44.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4-var-som-om44.dtsi"
-#include "omap4-var-som-om44-wlan.dtsi"
-#include "omap4-var-om44customboard.dtsi"
-
-/ {
-	model = "Variscite VAR-DVK-OM44";
-	compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
-	lcd0: display {
-		compatible = "innolux,at070tn83", "panel-dpi";
-		label = "lcd";
-		panel-timing {
-			clock-frequency = <33333333>;
-
-			hback-porch = <40>;
-			hactive = <800>;
-			hfront-porch = <40>;
-			hsync-len = <48>;
-
-			vback-porch = <29>;
-			vactive = <480>;
-			vfront-porch = <13>;
-			vsync-len = <3>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-
-		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-};
diff --git a/src/arm/omap4-var-om44customboard.dtsi b/src/arm/omap4-var-om44customboard.dtsi
deleted file mode 100644
index f2d2fdb75628..000000000000
--- a/src/arm/omap4-var-om44customboard.dtsi
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_led_pins>;
-
-		led0 {
-			label = "var:green:led0";
-			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1 {
-			label = "var:green:led1";
-			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user-key@184 {
-			label = "user";
-			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
-			linux,code = <BTN_EXTRA>;
-			gpio-key,wakeup;
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_pins>;
-		label = "hdmi";
-		type = "a";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
-			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1)	/* i2c2_scl.uart1_rx */
-			OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1)		/* i2c2_sda.uart1_tx */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	mcasp_pins: pinmux_mcsasp_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
-			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data21 */
-			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data20 */
-			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data19 */
-			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data18 */
-			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data15 */
-			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data14 */
-			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data13 */
-			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data12 */
-			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data11 */
-			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data10 */
-			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data9 */
-			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data16 */
-			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data17 */
-			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_hsync */
-			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)		/* dispc2_pclk */
-			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_vsync */
-			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_de */
-			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data8 */
-			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data7 */
-			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data6 */
-			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data5 */
-			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data4 */
-			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data3 */
-			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data2 */
-			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data1 */
-			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc5_pins: pinmux_mmc5_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-
-	gpio_led_pins: pinmux_gpio_led_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
-			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
-		>;
-	};
-
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
-		>;
-	};
-
-	ks8851_irq_pins: pinmux_ks8851_irq_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
-		>;
-	};
-
-	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
-		>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-	status = "okay";
-
-	eth@0 {
-		compatible = "ks8851";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ks8851_irq_pins>;
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
-	};
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc5_pins>;
-	vmmc-supply = <&vbat>;
-	bus-width = <4>;
-	cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
-	status = "okay";
-};
-
-&dss {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-		};
-	};
-};
diff --git a/src/arm/omap4-var-som-om44-wlan.dtsi b/src/arm/omap4-var-som-om44-wlan.dtsi
deleted file mode 100644
index cc66af419236..000000000000
--- a/src/arm/omap4-var-som-om44-wlan.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	/* regulator for wl12xx on sdio4 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_ctrl_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;	/* gpio 43 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap4_pmx_core {
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
-			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 (WLAN_EN) */
-		>;
-	};
-
-	mmc4_pins: pinmux_mmc4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
-			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
-			OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_somi.sdmmc4_dat0 */
-			OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_tx.sdmmc4_dat1 */
-			OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_rx.sdmmc4_dat2 */
-			OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_cs0.sdmmc4_dat3 */
-		>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&mmc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc4_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	status = "okay";
-};
diff --git a/src/arm/omap4-var-som-om44.dtsi b/src/arm/omap4-var-som-om44.dtsi
deleted file mode 100644
index 062701e1a898..000000000000
--- a/src/arm/omap4-var-som-om44.dtsi
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "omap4460.dtsi"
-
-/ {
-	model = "Variscite VAR-SOM-OM44";
-	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	sound: sound@0 {
-		compatible = "ti,abe-twl6040";
-		ti,model = "VAR-SOM-OM44";
-
-		ti,mclk-freq = <38400000>;
-		ti,mcpdm = <&mcpdm>;
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&hsusbb1_phy_clk_pins
-			&hsusbb1_phy_rst_pins
-		>;
-
-		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
-		vcc-supply = <&vbat>;
-
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	vbat: fixedregulator-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	tsc2004_pins: pinmux_tsc2004_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
-			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb1_hub_rst_pins
-		&lan7500_rst_pins
-	>;
-
-	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
-		>;
-	};
-
-	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
-		>;
-	};
-
-	lan7500_rst_pins: pinmux_lan7500_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&vusim {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-always-on;
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	touchscreen: tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2004_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
-		status = "disabled";
-	};
-
-	tmp105@49 {
-		compatible = "ti,tmp105";
-		reg = <0x49>;
-	};
-
-	eeprom@50 {
-		compatible = "microchip,24c32";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	status = "disabled";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&gpmc {
-	status = "disabled";
-};
-
-&mcspi1 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "disabled";
-};
-
-&mcspi3 {
-	status = "disabled";
-};
-
-&mcspi4 {
-	status = "disabled";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-	ti,non-removable;
-	status = "okay";
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&keypad {
-	status = "disabled";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
diff --git a/src/arm/omap4-var-som.dts b/src/arm/omap4-var-som.dts
deleted file mode 100644
index b41269e871dd..000000000000
--- a/src/arm/omap4-var-som.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-
-/ {
-	model = "Variscite OMAP4 SOM";
-	compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	vdd_eth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-};
-
-#include "twl6030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * Temperature Sensor
-	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
-	 */
-	tmp105@49 {
-		compatible = "ti,tmp105";
-		reg = <0x49>;
-	};
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-};
-
-&mcspi1 {
-	eth@0 {
-		compatible = "ks8851";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */
-		vdd-supply = <&vdd_eth>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	ti,bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	ti,bus-width = <4>;
-};
diff --git a/src/arm/omap4-var-stk-om44.dts b/src/arm/omap4-var-stk-om44.dts
deleted file mode 100644
index 56b64e618608..000000000000
--- a/src/arm/omap4-var-stk-om44.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4-var-som-om44.dtsi"
-#include "omap4-var-som-om44-wlan.dtsi"
-#include "omap4-var-om44customboard.dtsi"
-
-/ {
-	model = "Variscite VAR-STK-OM44";
-	compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-};
diff --git a/src/arm/omap4.dtsi b/src/arm/omap4.dtsi
deleted file mode 100644
index 69408b53200d..000000000000
--- a/src/arm/omap4.dtsi
+++ /dev/null
@@ -1,941 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap4430", "ti,omap4";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-	};
-
-	L2: l2-cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	local-timer@48240600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		clocks = <&mpu_periphclk>;
-		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-		};
-
-		dsp {
-			compatible = "ti,omap3-c64";
-			ti,hwmods = "dsp";
-		};
-
-		iva {
-			compatible = "ti,ivahd";
-			ti,hwmods = "iva";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP4 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x1000>,
-		      <0x44800000 0x2000>,
-		      <0x45000000 0x1000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		cm1: cm1@4a004000 {
-			compatible = "ti,omap4-cm1";
-			reg = <0x4a004000 0x2000>;
-
-			cm1_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm1_clockdomains: clockdomains {
-			};
-		};
-
-		prm: prm@4a306000 {
-			compatible = "ti,omap4-prm";
-			reg = <0x4a306000 0x3000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		cm2: cm2@4a008000 {
-			compatible = "ti,omap4-cm2";
-			reg = <0x4a008000 0x3000>;
-
-			cm2_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm2_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@4a30a000 {
-			compatible = "ti,omap4-scrm";
-			reg = <0x4a30a000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@4a304000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4a304000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap4_pmx_core: pinmux@4a100040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a100040 0x0196>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-		omap4_pmx_wkup: pinmux@4a31e040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a31e040 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-
-		omap4_padconf_global: tisyscon@4a1005a0 {
-			compatible = "syscon";
-			reg = <0x4a1005a0 0x170>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x60 0x4>;
-			syscon = <&omap4_padconf_global>;
-			pbias_mmc_reg: pbias_mmc_omap4 {
-				regulator-name = "pbias_mmc_omap4";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
-		};
-
-		gpio1: gpio@4a310000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4a310000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,omap4430-gpmc";
-			reg = <0x50000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			clocks = <&l3_div_ck>;
-			clock-names = "fck";
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		i2c4: i2c@48350000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48350000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc5: mmc@480d5000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d5000 0x400>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc5";
-			ti,needs-special-reset;
-			dmas = <&sdma 59>, <&sdma 60>;
-			dma-names = "tx", "rx";
-		};
-
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-		};
-
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			ti,iommu-bus-err-back;
-		};
-
-		wdt2: wdt@4a314000 {
-			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
-			reg = <0x4a314000 0x80>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		mcpdm: mcpdm@40132000 {
-			compatible = "ti,omap4-mcpdm";
-			reg = <0x40132000 0x7f>, /* MPU private access */
-			      <0x49032000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mcpdm";
-			dmas = <&sdma 65>,
-			       <&sdma 66>;
-			dma-names = "up_link", "dn_link";
-			status = "disabled";
-		};
-
-		dmic: dmic@4012e000 {
-			compatible = "ti,omap4-dmic";
-			reg = <0x4012e000 0x7f>, /* MPU private access */
-			      <0x4902e000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmic";
-			dmas = <&sdma 67>;
-			dma-names = "up_link";
-			status = "disabled";
-		};
-
-		mcbsp1: mcbsp@40122000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40122000 0xff>, /* MPU private access */
-			      <0x49022000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@40124000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40124000 0xff>, /* MPU private access */
-			      <0x49024000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@40126000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40126000 0xff>, /* MPU private access */
-			      <0x49026000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@48096000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x48096000 0xff>; /* L4 Interconnect */
-			reg-names = "mpu";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		keypad: keypad@4a31c000 {
-			compatible = "ti,omap4-keypad";
-			reg = <0x4a31c000 0x80>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			reg-names = "mpu";
-			ti,hwmods = "kbd";
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap4-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
-			ti,hwmods = "dmm";
-		};
-
-		emif1: emif@4c000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4c000000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "emif1";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		emif2: emif@4d000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4d000000 0x100>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "emif2";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		ocp2scp@4a0ad000 {
-			compatible = "ti,omap-ocp2scp";
-			reg = <0x4a0ad000 0x1f>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp_usb_phy";
-			usb2_phy: usb2phy@4a0ad080 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a0ad080 0x58>;
-				ctrl-module = <&omap_control_usb2phy>;
-				clocks = <&usb_phy_cm_clk32k>;
-				clock-names = "wkupclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		mailbox: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@4a318000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4a318000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@40138000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x40138000 0x80>,
-			      <0x49038000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4013a000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4013a000 0x80>,
-			      <0x4903a000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@4013c000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4013c000 0x80>,
-			      <0x4903c000 0x80>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@4013e000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4013e000 0x80>,
-			      <0x4903e000 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			ti,timer-pwm;
-			ti,timer-dsp;
-		};
-
-		timer9: timer@4803e000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		usbhstll: usbhstll@4a062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x4a062000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@4a064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x4a064000 0x800>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&init_60m_fclk>,
-				 <&xclk60mhsp1_ck>,
-				 <&xclk60mhsp2_ck>;
-			clock-names = "refclk_60m_int",
-				      "refclk_60m_ext_p1",
-				      "refclk_60m_ext_p2";
-
-			usbhsohci: ohci@4a064800 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			usbhsehci: ehci@4a064c00 {
-				compatible = "ti,ehci-omap";
-				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usbotg: control-phy@4a00233c {
-			compatible = "ti,control-phy-otghs";
-			reg = <0x4a00233c 0x4>;
-			reg-names = "otghs_control";
-		};
-
-		usb_otg_hs: usb_otg_hs@4a0ab000 {
-			compatible = "ti,omap4-musb";
-			reg = <0x4a0ab000 0x7ff>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			usb-phy = <&usb2_phy>;
-			phys = <&usb2_phy>;
-			phy-names = "usb2-phy";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
-			ctrl-module = <&omap_control_usbotg>;
-		};
-
-		aes: aes@4b501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x4b501000 0xa0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 111>, <&sdma 110>;
-			dma-names = "tx", "rx";
-		};
-
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 117>, <&sdma 116>;
-			dma-names = "tx", "rx";
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			ti,tranxdone-status-mask = <0x80>;
-			clocks = <&sys_clkin_ck>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			status = "disabled";
-		};
-
-		abb_iva: regulator-abb-iva {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_iva";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			ti,tranxdone-status-mask = <0x80000000>;
-			clocks = <&sys_clkin_ck>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			status = "disabled";
-		};
-
-		dss: dss@58000000 {
-			compatible = "ti,omap4-dss";
-			reg = <0x58000000 0x80>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss_dss_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,omap4-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_dss_clk>;
-				clock-names = "fck";
-			};
-
-			rfbi: encoder@58002000  {
-				compatible = "ti,omap4-rfbi";
-				reg = <0x58002000 0x1000>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-				clocks = <&dss_dss_clk>, <&dss_fck>;
-				clock-names = "fck", "ick";
-			};
-
-			venc: encoder@58003000 {
-				compatible = "ti,omap4-venc";
-				reg = <0x58003000 0x1000>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-				clocks = <&dss_tv_clk>;
-				clock-names = "fck";
-			};
-
-			dsi1: encoder@58004000 {
-				compatible = "ti,omap4-dsi";
-				reg = <0x58004000 0x200>,
-				      <0x58004200 0x40>,
-				      <0x58004300 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			dsi2: encoder@58005000 {
-				compatible = "ti,omap4-dsi";
-				reg = <0x58005000 0x200>,
-				      <0x58005200 0x40>,
-				      <0x58005300 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi2";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			hdmi: encoder@58006000 {
-				compatible = "ti,omap4-hdmi";
-				reg = <0x58006000 0x200>,
-				      <0x58006200 0x100>,
-				      <0x58006300 0x100>,
-				      <0x58006400 0x1000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma 76>;
-				dma-names = "audio_tx";
-			};
-		};
-	};
-};
-
-/include/ "omap44xx-clocks.dtsi"
diff --git a/src/arm/omap443x-clocks.dtsi b/src/arm/omap443x-clocks.dtsi
deleted file mode 100644
index 2bd2166f88d3..000000000000
--- a/src/arm/omap443x-clocks.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	bandgap_fclk: bandgap_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1888>;
-	};
-};
diff --git a/src/arm/omap443x.dtsi b/src/arm/omap443x.dtsi
deleted file mode 100644
index 0adfa1d1ef20..000000000000
--- a/src/arm/omap443x.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Device Tree Source for OMAP443x SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap4.dtsi"
-
-/ {
-	cpus {
-		cpu0: cpu@0 {
-			/* OMAP443x variants OPP50-OPPNT */
-			operating-points = <
-				/* kHz    uV */
-				300000  1025000
-				600000  1200000
-				800000  1313000
-				1008000 1375000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <3>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-	};
-
-	ocp {
-		bandgap: bandgap {
-			reg = <0x4a002260 0x4
-			       0x4a00232C 0x4>;
-			compatible = "ti,omap4430-bandgap";
-
-			#thermal-sensor-cells = <0>;
-		};
-	};
-
-	ocp {
-		abb_mpu: regulator-abb-mpu {
-			status = "okay";
-
-			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
-			reg-names = "base-address", "int-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1025000		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1313000		0	0	0	0	0
-			1375000		1	0	0	0	0
-			1389000		1	0	0	0	0
-			>;
-		};
-
-		/* Default unused, just provide register info for record */
-		abb_iva: regulator-abb-iva {
-			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
-			reg-names = "base-address", "int-address";
-		};
-
-	};
-
-};
-
-/include/ "omap443x-clocks.dtsi"
diff --git a/src/arm/omap4460.dtsi b/src/arm/omap4460.dtsi
deleted file mode 100644
index 194f9ef0a009..000000000000
--- a/src/arm/omap4460.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Device Tree Source for OMAP4460 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#include "omap4.dtsi"
-
-/ {
-	cpus {
-		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
-		cpu0: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				350000  1025000
-				700000  1200000
-				920000  1313000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "debugss";
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-	};
-
-	ocp {
-		bandgap: bandgap {
-			reg = <0x4a002260 0x4
-			       0x4a00232C 0x4
-			       0x4a002378 0x18>;
-			compatible = "ti,omap4460-bandgap";
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-			gpios = <&gpio3 22 0>; /* tshut */
-
-			#thermal-sensor-cells = <0>;
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			status = "okay";
-
-			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
-			      <0x4A002268 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1025000		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1313000		0	0	0x100000 0x40000 0
-			1375000		1	0	0	0	0
-			1389000		1	0	0	0	0
-			>;
-		};
-
-		abb_iva: regulator-abb-iva {
-			status = "okay";
-
-			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
-			      <0x4A002268 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			950000		0	0	0	0	0
-			1140000		0	0	0	0	0
-			1291000		0	0	0x200000 0	0
-			1375000		1	0	0	0	0
-			1376000		1	0	0	0	0
-			>;
-		};
-	};
-
-};
-
-/include/ "omap446x-clocks.dtsi"
diff --git a/src/arm/omap446x-clocks.dtsi b/src/arm/omap446x-clocks.dtsi
deleted file mode 100644
index be033e9803e9..000000000000
--- a/src/arm/omap446x-clocks.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	div_ts_ck: div_ts_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1888>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	bandgap_ts_fclk: bandgap_ts_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&div_ts_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1888>;
-	};
-};
diff --git a/src/arm/omap44xx-clocks.dtsi b/src/arm/omap44xx-clocks.dtsi
deleted file mode 100644
index c821ff5e9b8d..000000000000
--- a/src/arm/omap44xx-clocks.dtsi
+++ /dev/null
@@ -1,1651 +0,0 @@
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm1_clocks {
-	extalt_clkin_ck: extalt_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <59000000>;
-	};
-
-	pad_clks_src_ck: pad_clks_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	pad_clks_ck: pad_clks_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_clks_src_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0108>;
-	};
-
-	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	slimbus_src_clk: slimbus_src_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	slimbus_clk: slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_src_clk>;
-		ti,bit-shift = <10>;
-		reg = <0x0108>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	tie_low_clock_ck: tie_low_clock_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp1_ck: xclk60mhsp1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp2_ck: xclk60mhsp2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60motg_ck: xclk60motg_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-		reg = <0x01f0>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	abe_clk: abe_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	aess_fclk: aess_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x0528>;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m6x2_ck: dpll_core_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	ddrphy_ck: ddrphy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_core_m5x2_ck: dpll_core_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	div_core_ck: div_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5x2_ck>;
-		reg = <0x0100>;
-		ti,max-div = <2>;
-	};
-
-	div_iva_hs_clk: div_iva_hs_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x01dc>;
-		ti,index-power-of-two;
-	};
-
-	div_mpu_hs_clk: div_mpu_hs_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	dpll_core_m4x2_ck: dpll_core_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0138>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_clk_div_ck: dll_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0134>;
-	};
-
-	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0134>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
-	};
-
-	dpll_core_m7x2_ck: dpll_core_m7x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-	};
-
-	dpll_iva_x2_ck: dpll_iva_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_iva_ck>;
-	};
-
-	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	per_hs_clk_div_ck: per_hs_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	l3_div_ck: l3_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&div_core_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <2>;
-		reg = <0x0100>;
-	};
-
-	l4_div_ck: l4_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-		reg = <0x0100>;
-	};
-
-	lp_clk_div_ck: lp_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	mpu_periphclk: mpu_periphclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ocp_abe_iclk: ocp_abe_iclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x0528>;
-		ti,dividers = <2>, <1>;
-	};
-
-	per_abe_24m_fclk: per_abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dmic_sync_mux_ck: dmic_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0538>;
-	};
-
-	func_dmic_abe_gfclk: func_dmic_abe_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0538>;
-	};
-
-	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0540>;
-	};
-
-	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0540>;
-	};
-
-	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0548>;
-	};
-
-	func_mcbsp1_gfclk: func_mcbsp1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0548>;
-	};
-
-	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0550>;
-	};
-
-	func_mcbsp2_gfclk: func_mcbsp2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0558>;
-	};
-
-	func_mcbsp3_gfclk: func_mcbsp3_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	slimbus1_fclk_1: slimbus1_fclk_1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_24m_clk>;
-		ti,bit-shift = <9>;
-		reg = <0x0560>;
-	};
-
-	slimbus1_fclk_0: slimbus1_fclk_0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&abe_24m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x0560>;
-	};
-
-	slimbus1_fclk_2: slimbus1_fclk_2 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_clks_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0560>;
-	};
-
-	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_clk>;
-		ti,bit-shift = <11>;
-		reg = <0x0560>;
-	};
-
-	timer5_sync_mux: timer5_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer6_sync_mux: timer6_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	timer7_sync_mux: timer7_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0578>;
-	};
-
-	timer8_sync_mux: timer8_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0108>;
-	};
-
-	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	dbgclk_mux_ck: dbgclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
-		reg = <0x0108>;
-	};
-
-	syc_clk_div_ck: syc_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x0100>;
-		ti,max-div = <2>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1838>;
-	};
-
-	dmt1_clk_mux: dmt1_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	usim_ck: usim_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m4x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1858>;
-		ti,dividers = <14>, <18>;
-	};
-
-	usim_fclk: usim_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usim_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1858>;
-	};
-
-	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x1a20>;
-	};
-
-	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x1a20>;
-	};
-
-	stm_clk_div_ck: stm_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&pmd_stm_clock_mux_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <64>;
-		reg = <0x1a20>;
-		ti,index-power-of-two;
-	};
-
-	trace_clk_div_div_ck: trace_clk_div_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&pmd_trace_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1a20>;
-		ti,dividers = <0>, <1>, <2>, <0>, <4>;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clocks = <&trace_clk_div_div_ck>;
-	};
-};
-
-&prm_clockdomains {
-	emu_sys_clkdm: emu_sys_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&trace_clk_div_ck>;
-	};
-};
-
-&cm2_clocks {
-	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-		reg = <0x0150>;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0154>;
-	};
-
-	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
-	};
-
-	dpll_per_m4x2_ck: dpll_per_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m5x2_ck: dpll_per_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m6x2_ck: dpll_per_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m7x2_ck: dpll_per_m7x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_ck: dpll_usb_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b4>;
-		ti,clock-mult = <1>;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	ducati_clk_mux_ck: ducati_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
-		reg = <0x0100>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_24mc_fclk: func_24mc_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <4>, <8>;
-	};
-
-	func_48mc_fclk: func_48mc_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_64m_fclk: func_64m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m4x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <2>, <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <2>, <4>;
-	};
-
-	init_60m_fclk: init_60m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	per_abe_nc_fclk: per_abe_nc_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		reg = <0x0108>;
-		ti,max-div = <2>;
-	};
-
-	aes1_fck: aes1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15a0>;
-	};
-
-	aes2_fck: aes2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15a8>;
-	};
-
-	dss_sys_clk: dss_sys_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&syc_clk_div_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1120>;
-	};
-
-	dss_tv_clk: dss_tv_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&extalt_clkin_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1120>;
-	};
-
-	dss_dss_clk: dss_dss_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m5x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1120>;
-		ti,set-rate-parent;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48mc_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1120>;
-	};
-
-	dss_fck: dss_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1120>;
-	};
-
-	fdif_fck: fdif_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m4x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <4>;
-		reg = <0x1028>;
-		ti,index-power-of-two;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1460>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1468>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1470>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1478>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1480>;
-	};
-
-	sgx_clk_mux: sgx_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-	};
-
-	hsi_fck: hsi_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <4>;
-		reg = <0x1338>;
-		ti,index-power-of-two;
-	};
-
-	iss_ctrlclk: iss_ctrlclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_96m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1020>;
-	};
-
-	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>;
-		ti,bit-shift = <25>;
-		reg = <0x14e0>;
-	};
-
-	per_mcbsp4_gfclk: per_mcbsp4_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x14e0>;
-	};
-
-	hsmmc1_fclk: hsmmc1_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x1328>;
-	};
-
-	hsmmc2_fclk: hsmmc2_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x1330>;
-	};
-
-	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x13e0>;
-	};
-
-	sha2md5_fck: sha2md5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
-	slimbus2_fclk_1: slimbus2_fclk_1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_abe_24m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1538>;
-	};
-
-	slimbus2_fclk_0: slimbus2_fclk_0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_24mc_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1538>;
-	};
-
-	slimbus2_slimbus_clk: slimbus2_slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_slimbus_core_clks_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1538>;
-	};
-
-	smartreflex_core_fck: smartreflex_core_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0638>;
-	};
-
-	smartreflex_iva_fck: smartreflex_iva_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0630>;
-	};
-
-	smartreflex_mpu_fck: smartreflex_mpu_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0628>;
-	};
-
-	cm2_dm10_mux: cm2_dm10_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1428>;
-	};
-
-	cm2_dm11_mux: cm2_dm11_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1430>;
-	};
-
-	cm2_dm2_mux: cm2_dm2_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1438>;
-	};
-
-	cm2_dm3_mux: cm2_dm3_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1440>;
-	};
-
-	cm2_dm4_mux: cm2_dm4_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1448>;
-	};
-
-	cm2_dm9_mux: cm2_dm9_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1450>;
-	};
-
-	usb_host_fs_fck: usb_host_fs_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48mc_fclk>;
-		ti,bit-shift = <1>;
-		reg = <0x13d0>;
-	};
-
-	utmi_p1_gfclk: utmi_p1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p1_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1358>;
-	};
-
-	utmi_p2_gfclk: utmi_p2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p2_gfclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <11>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <12>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_func48mclk: usb_host_hs_func48mclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48mc_fclk>;
-		ti,bit-shift = <15>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_fck: usb_host_hs_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <1>;
-		reg = <0x1358>;
-	};
-
-	otg_60m_gfclk: otg_60m_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1360>;
-	};
-
-	usb_otg_hs_xclk: usb_otg_hs_xclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&otg_60m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1360>;
-	};
-
-	usb_otg_hs_ick: usb_otg_hs_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x1360>;
-	};
-
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1368>;
-	};
-
-	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1368>;
-	};
-
-	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1368>;
-	};
-
-	usb_tll_hs_ick: usb_tll_hs_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_div_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x1368>;
-	};
-};
-
-&cm2_clockdomains {
-	l3_init_clkdm: l3_init_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>, <&usb_host_fs_fck>;
-	};
-};
-
-&scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_ck: auxclk0_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
-	};
-
-	auxclk0_ck: auxclk0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk0_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0310>;
-	};
-
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_ck: auxclk1_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
-	};
-
-	auxclk1_ck: auxclk1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk1_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0314>;
-	};
-
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_ck: auxclk2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
-	};
-
-	auxclk2_ck: auxclk2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk2_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0318>;
-	};
-
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_ck: auxclk3_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
-	};
-
-	auxclk3_ck: auxclk3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk3_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x031c>;
-	};
-
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_ck: auxclk4_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
-	};
-
-	auxclk4_ck: auxclk4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk4_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0320>;
-	};
-
-	auxclk5_src_gate_ck: auxclk5_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0324>;
-	};
-
-	auxclk5_src_mux_ck: auxclk5_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0324>;
-	};
-
-	auxclk5_src_ck: auxclk5_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
-	};
-
-	auxclk5_ck: auxclk5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk5_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0324>;
-	};
-
-	auxclkreq0_ck: auxclkreq0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0210>;
-	};
-
-	auxclkreq1_ck: auxclkreq1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	auxclkreq2_ck: auxclkreq2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0218>;
-	};
-
-	auxclkreq3_ck: auxclkreq3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-
-	auxclkreq4_ck: auxclkreq4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0220>;
-	};
-
-	auxclkreq5_ck: auxclkreq5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0224>;
-	};
-};
diff --git a/src/arm/omap5-cm-t54.dts b/src/arm/omap5-cm-t54.dts
deleted file mode 100644
index b8698ca68647..000000000000
--- a/src/arm/omap5-cm-t54.dts
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * Support for CompuLab CM-T54
- */
-/dts-v1/;
-
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "CompuLab CM-T54";
-	compatible = "compulab,omap5-cm-t54", "ti,omap5";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2048 MB */
-	};
-
-	vmmcsd_fixed: fixed-regulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_pdn_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&ldo2_reg>;
-		gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
-		startup-delay-us = <1000>;
-		enable-active-high;
-	};
-
-	vwlan_fixed: fixed-regulator-vwlan {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vwlan_pdn_fixed>;
-		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
-		startup-delay-us = <1000>;
-		enable-active-high;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "Heartbeat";
-			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&led_gpio_pins
-			&usbhost_pins
-	>;
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
-			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
-			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
-			OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
-			OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
-			OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
-			OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
-			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
-			OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
-			OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
-			OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
-			OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
-			OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
-			OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
-			OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
-			OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
-			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
-			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
-			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
-			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
-			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
-		>;
-	};
-
-	wlan_gpios_pins: pinmux_wlan_gpios_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */
-			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
-			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
-
-			OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
-			OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
-
-			OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
-			OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc3_pins
-		&wlan_gpios_pins
-	>;
-	vmmc-supply = <&vwlan_fixed>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "at24,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
-		interrupt-parent = <&gic>;
-		reg = <0x48>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-		};
-
-		rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&palmas>;
-			interrupts = <8 IRQ_TYPE_NONE>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-name = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					ti,smps-range = <0x80>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_3V3_WLAN */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					startup-delay-us = <1000>;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VCC_1V5_AUD */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
diff --git a/src/arm/omap5-core-thermal.dtsi b/src/arm/omap5-core-thermal.dtsi
deleted file mode 100644
index 19212ac6eef0..000000000000
--- a/src/arm/omap5-core-thermal.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Device Tree Source for OMAP543x SoC CORE thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-core_thermal: core_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     2>;
-
-	trips {
-		core_crit: core_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/src/arm/omap5-gpu-thermal.dtsi b/src/arm/omap5-gpu-thermal.dtsi
deleted file mode 100644
index 1b87aca88b77..000000000000
--- a/src/arm/omap5-gpu-thermal.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Device Tree Source for OMAP543x SoC GPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-gpu_thermal: gpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     1>;
-
-	trips {
-		gpu_crit: gpu_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/src/arm/omap5-sbc-t54.dts b/src/arm/omap5-sbc-t54.dts
deleted file mode 100644
index aa98fea3f2b3..000000000000
--- a/src/arm/omap5-sbc-t54.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T54 with CM-T54
- */
-
-#include "omap5-cm-t54.dts"
-
-/ {
-	model = "CompuLab SBC-T54 with CM-T54";
-	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
-};
-
-&omap5_pmx_core {
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
-			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
-		>;
-	};
-
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */
-			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc1_pins
-		&mmc1_aux_pins
-	>;
-	cd-inverted;
-	wp-inverted;
-	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
-	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "at24,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
diff --git a/src/arm/omap5-uevm.dts b/src/arm/omap5-uevm.dts
deleted file mode 100644
index 159720d6c956..000000000000
--- a/src/arm/omap5-uevm.dts
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "TI OMAP5 uEVM board";
-	compatible = "ti,omap5-uevm", "ti,omap5";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2032 MB */
-	};
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	vmmcsd_fixed: fixedregulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
-		clocks = <&auxclk1_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	tpd12s015: encoder@0 {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
-			<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
-			<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "b";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "omap5-uevm";
-
-		ti,mclk-freq = <19200000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_pins
-			&led_gpio_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
-			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
-			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
-			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
-			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
-			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
-			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			0x184 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
-			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
-			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
-		>;
-	};
-
-	mcspi3_pins: pinmux_mcspi3_pins {
-		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
-			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
-			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
-			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
-			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
-
-			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
-			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
-
-			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
-			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
-		>;
-	};
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
-			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
-			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
-		>;
-	};
-
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
-			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
-			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
-			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
-		>;
-	};
-};
-
-&omap5_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_wkup_pins
-	>;
-
-	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
-		pinctrl-single,pins = <
-			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
-		interrupt-parent = <&gic>;
-		reg = <0x48>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-		};
-
-		clk32kgaudio: palmas_clk32k@1 {
-			compatible = "ti,palmas-clk32kgaudio";
-			#clock-cells = <0>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-name = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2100000>;
-					ti,smps-range = <0x80>;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VCC_2V8_DISP: Does not go anywhere */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDAPHY_MDM: vdda_lli */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					/* Only if Modem is used */
-					status = "disabled";
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio5 13 0>;  /* gpio line 141 */
-
-		vio-supply = <&smps7_reg>;
-		v2v1-supply = <&smps9_reg>;
-		enable-active-high;
-
-		clocks = <&clk32kgaudio>;
-		clock-names = "clk32k";
-	};
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-
-	clock-frequency = <400000>;
-
-	gpio9: gpio@22 {
-		compatible = "ti,tca6424";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
-	extcon = <&extcon_usb3>;
-	vbus-supply = <&smps10_out1_reg>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-};
-
-&uart1 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart3_pins>;
-};
-
-&uart5 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart5_pins>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&dss {
-	status = "ok";
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/src/arm/omap5.dtsi b/src/arm/omap5.dtsi
deleted file mode 100644
index fc8df1739f39..000000000000
--- a/src/arm/omap5.dtsi
+++ /dev/null
@@ -1,1053 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "ti,omap5";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000 1060000
-				1500000 1250000
-			>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-		};
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-		#include "omap5-gpu-thermal.dtsi"
-		#include "omap5-core-thermal.dtsi"
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		/* PPI secure/nonsecure IRQ */
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP3 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>,
-		      <0x45000000 0x4000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		prm: prm@4ae06000 {
-			compatible = "ti,omap5-prm";
-			reg = <0x4ae06000 0x3000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		cm_core_aon: cm_core_aon@4a004000 {
-			compatible = "ti,omap5-cm-core-aon";
-			reg = <0x4a004000 0x2000>;
-
-			cm_core_aon_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_aon_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@4ae0a000 {
-			compatible = "ti,omap5-scrm";
-			reg = <0x4ae0a000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		cm_core: cm_core@4a008000 {
-			compatible = "ti,omap5-cm-core";
-			reg = <0x4a008000 0x3000>;
-
-			cm_core_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap5_pmx_core: pinmux@4a002840 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a002840 0x01b6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-		omap5_pmx_wkup: pinmux@4ae0c840 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4ae0c840 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-
-		omap5_padconf_global: tisyscon@4a002da0 {
-			compatible = "syscon";
-			reg = <0x4A002da0 0xec>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x60 0x4>;
-			syscon = <&omap5_padconf_global>;
-			pbias_mmc_reg: pbias_mmc_omap5 {
-				regulator-name = "pbias_mmc_omap5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
-		};
-
-		gpio1: gpio@4ae10000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4ae10000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio7: gpio@48051000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48051000 0x200>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio7";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio8: gpio@48053000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48053000 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio8";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,omap4430-gpmc";
-			reg = <0x50000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		i2c4: i2c@4807a000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807a000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-		};
-
-		i2c5: i2c@4807c000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807c000 0x100>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c5";
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		uart5: serial@48066000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48066000 0x100>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-		};
-
-		uart6: serial@48068000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48068000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc5: mmc@480d5000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d5000 0x400>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc5";
-			ti,needs-special-reset;
-			dmas = <&sdma 59>, <&sdma 60>;
-			dma-names = "tx", "rx";
-		};
-
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-		};
-
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			ti,iommu-bus-err-back;
-		};
-
-		keypad: keypad@4ae1c000 {
-			compatible = "ti,omap4-keypad";
-			reg = <0x4ae1c000 0x400>;
-			ti,hwmods = "kbd";
-		};
-
-		mcpdm: mcpdm@40132000 {
-			compatible = "ti,omap4-mcpdm";
-			reg = <0x40132000 0x7f>, /* MPU private access */
-			      <0x49032000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mcpdm";
-			dmas = <&sdma 65>,
-			       <&sdma 66>;
-			dma-names = "up_link", "dn_link";
-			status = "disabled";
-		};
-
-		dmic: dmic@4012e000 {
-			compatible = "ti,omap4-dmic";
-			reg = <0x4012e000 0x7f>, /* MPU private access */
-			      <0x4902e000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmic";
-			dmas = <&sdma 67>;
-			dma-names = "up_link";
-			status = "disabled";
-		};
-
-		mcbsp1: mcbsp@40122000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40122000 0xff>, /* MPU private access */
-			      <0x49022000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@40124000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40124000 0xff>, /* MPU private access */
-			      <0x49024000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@40126000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40126000 0xff>, /* MPU private access */
-			      <0x49026000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mailbox: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@4ae18000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4ae18000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@40138000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x40138000 0x80>,
-			      <0x49038000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer6: timer@4013a000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4013a000 0x80>,
-			      <0x4903a000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4013c000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4013c000 0x80>,
-			      <0x4903c000 0x80>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@4013e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4013e000 0x80>,
-			      <0x4903e000 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer9: timer@4803e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		wdt2: wdt@4ae14000 {
-			compatible = "ti,omap5-wdt", "ti,omap3-wdt";
-			reg = <0x4ae14000 0x80>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
-			ti,hwmods = "dmm";
-		};
-
-		emif1: emif@4c000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif1";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4c000000 0x400>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		emif2: emif@4d000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif2";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4d000000 0x400>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		usb3: omap_dwc3@4a020000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss";
-			reg = <0x4a020000 0x10000>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			dwc3@4a030000 {
-				compatible = "snps,dwc3";
-				reg = <0x4a030000 0x10000>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy>, <&usb3_phy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "peripheral";
-				tx-fifo-resize;
-			};
-		};
-
-		ocp2scp@4a080000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x4a080000 0x20>;
-			ranges;
-			ti,hwmods = "ocp2scp1";
-			usb2_phy: usb2phy@4a084000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb2phy>;
-				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-			};
-
-			usb3_phy: usb3phy@4a084400 {
-				compatible = "ti,omap-usb3";
-				reg = <0x4a084400 0x80>,
-				      <0x4a084800 0x64>,
-				      <0x4a084c00 0x40>;
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy>;
-				clocks = <&usb_phy_cm_clk32k>,
-					 <&sys_clkin>,
-					 <&usb_otg_ss_refclk960m>;
-				clock-names =	"wkupclk",
-						"sysclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		usbhstll: usbhstll@4a062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x4a062000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@4a064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x4a064000 0x800>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&l3init_60m_fclk>,
-				 <&xclk60mhsp1_ck>,
-				 <&xclk60mhsp2_ck>;
-			clock-names = "refclk_60m_int",
-				      "refclk_60m_ext_p1",
-				      "refclk_60m_ext_p2";
-
-			usbhsohci: ohci@4a064800 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			usbhsehci: ehci@4a064c00 {
-				compatible = "ti,ehci-omap";
-				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		bandgap: bandgap@4a0021e0 {
-			reg = <0x4a0021e0 0xc
-			       0x4a00232c 0xc
-			       0x4a002380 0x2c
-			       0x4a0023C0 0x3c>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			compatible = "ti,omap5430-bandgap";
-
-			#thermal-sensor-cells = <1>;
-		};
-
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin>;
-			clock-names = "sysclk";
-		};
-
-		/* OCP2SCP3 */
-		ocp2scp@4a090000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x4a090000 0x20>;
-			ranges;
-			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4a096000 {
-				compatible = "ti,phy-pipe3-sata";
-				reg = <0x4A096000 0x80>, /* phy_rx */
-				      <0x4A096400 0x64>, /* phy_tx */
-				      <0x4A096800 0x40>; /* pll_ctrl */
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin>;
-				clock-names = "sysclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&sata_ref_clk>;
-			ti,hwmods = "sata";
-		};
-
-		dss: dss@58000000 {
-			compatible = "ti,omap5-dss";
-			reg = <0x58000000 0x80>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss_dss_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,omap5-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_dss_clk>;
-				clock-names = "fck";
-			};
-
-			dsi1: encoder@58004000 {
-				compatible = "ti,omap5-dsi";
-				reg = <0x58004000 0x200>,
-				      <0x58004200 0x40>,
-				      <0x58004300 0x40>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			dsi2: encoder@58005000 {
-				compatible = "ti,omap5-dsi";
-				reg = <0x58009000 0x200>,
-				      <0x58009200 0x40>,
-				      <0x58009300 0x40>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi2";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			hdmi: encoder@58060000 {
-				compatible = "ti,omap5-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma 76>;
-				dma-names = "audio_tx";
-			};
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
-			      <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address", "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1250000		0	0x4	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_mm: regulator-abb-mm {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mm";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
-			      <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address", "ldo-address";
-			ti,tranxdone-status-mask = <0x80000000>;
-			/* LDOVBBMM_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMM_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1025000		0	0x0	0 0x02000000 0x01F00000
-			1120000		0	0x4	0 0x02000000 0x01F00000
-			>;
-		};
-	};
-};
-
-/include/ "omap54xx-clocks.dtsi"
diff --git a/src/arm/omap54xx-clocks.dtsi b/src/arm/omap54xx-clocks.dtsi
deleted file mode 100644
index e67a23b5d788..000000000000
--- a/src/arm/omap54xx-clocks.dtsi
+++ /dev/null
@@ -1,1353 +0,0 @@
-/*
- * Device Tree Source for OMAP5 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_core_aon_clocks {
-	pad_clks_src_ck: pad_clks_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	pad_clks_ck: pad_clks_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_clks_src_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0108>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	slimbus_src_clk: slimbus_src_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	slimbus_clk: slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_src_clk>;
-		ti,bit-shift = <10>;
-		reg = <0x0108>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	xclk60mhsp1_ck: xclk60mhsp1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp2_ck: xclk60mhsp2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	abe_clk: abe_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	abe_iclk: abe_iclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x0528>;
-		ti,dividers = <2>, <1>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h21x2_ck: dpll_core_h21x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	c2c_fclk: c2c_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h21x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	c2c_iclk: c2c_iclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&c2c_fclk>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_core_h11x2_ck: dpll_core_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0138>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0134>;
-		ti,index-starts-at-one;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-	};
-
-	dpll_iva_x2_ck: dpll_iva_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_iva_ck>;
-	};
-
-	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x01b8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x01bc>;
-		ti,index-starts-at-one;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	l3_iclk_div: l3_iclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpu_l3_iclk: gpu_l3_iclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4_root_clk_div: l4_root_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_clk>;
-		ti,bit-shift = <11>;
-		reg = <0x0560>;
-	};
-
-	aess_fclk: aess_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x0528>;
-	};
-
-	dmic_sync_mux_ck: dmic_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0538>;
-	};
-
-	dmic_gfclk: dmic_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0538>;
-	};
-
-	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0540>;
-	};
-
-	mcasp_gfclk: mcasp_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0540>;
-	};
-
-	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0548>;
-	};
-
-	mcbsp1_gfclk: mcbsp1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0548>;
-	};
-
-	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0550>;
-	};
-
-	mcbsp2_gfclk: mcbsp2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0558>;
-	};
-
-	mcbsp3_gfclk: mcbsp3_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	timer5_gfclk_mux: timer5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer6_gfclk_mux: timer6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	timer7_gfclk_mux: timer7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0578>;
-	};
-
-	timer8_gfclk_mux: timer8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin: sys_clkin {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		reg = <0x0108>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dss_syc_gfclk_div: dss_syc_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&wkupaon_iclk_mux>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1938>;
-	};
-
-	timer1_gfclk_mux: timer1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1940>;
-	};
-};
-&cm_core_clocks {
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_unipro1_ck: dpll_unipro1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&sys_clkin>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_unipro1_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_unipro1_ck>;
-		ti,max-div = <127>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_unipro2_ck: dpll_unipro2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&sys_clkin>;
-		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
-	};
-
-	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_unipro2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_unipro2_ck>;
-		ti,max-div = <127>;
-		reg = <0x01d0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_usb_ck: dpll_usb_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	dss_32khz_clk: dss_32khz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1420>;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1420>;
-	};
-
-	dss_dss_clk: dss_dss_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_h12x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1420>;
-		ti,set-rate-parent;
-	};
-
-	dss_sys_clk: dss_sys_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dss_syc_gfclk_div>;
-		ti,bit-shift = <10>;
-		reg = <0x1420>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1060>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1068>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1070>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1078>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1080>;
-	};
-
-	gpio7_dbclk: gpio7_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1110>;
-	};
-
-	gpio8_dbclk: gpio8_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1118>;
-	};
-
-	iss_ctrlclk: iss_ctrlclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_96m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1320>;
-	};
-
-	lli_txphy_clk: lli_txphy_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_unipro1_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x0f20>;
-	};
-
-	lli_txphy_ls_clk: lli_txphy_ls_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_unipro1_m2_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0f20>;
-	};
-
-	mmc1_32khz_clk: mmc1_32khz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1628>;
-	};
-
-	sata_ref_clk: sata_ref_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin>;
-		ti,bit-shift = <8>;
-		reg = <0x1688>;
-	};
-
-	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <11>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <12>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <6>;
-		reg = <0x1658>;
-	};
-
-	utmi_p1_gfclk: utmi_p1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p1_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1658>;
-	};
-
-	utmi_p2_gfclk: utmi_p2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p2_gfclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1658>;
-	};
-
-	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x16f0>;
-	};
-
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1668>;
-	};
-
-	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1668>;
-	};
-
-	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1668>;
-	};
-
-	fdif_fclk: fdif_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x1328>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1520>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x1520>;
-	};
-
-	hsi_fclk: hsi_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x1638>;
-	};
-
-	mmc1_fclk_mux: mmc1_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1628>;
-	};
-
-	mmc1_fclk: mmc1_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc1_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <2>;
-		reg = <0x1628>;
-	};
-
-	mmc2_fclk_mux: mmc2_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1630>;
-	};
-
-	mmc2_fclk: mmc2_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc2_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <2>;
-		reg = <0x1630>;
-	};
-
-	timer10_gfclk_mux: timer10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	timer11_gfclk_mux: timer11_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-
-	timer2_gfclk_mux: timer2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1038>;
-	};
-
-	timer3_gfclk_mux: timer3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1040>;
-	};
-
-	timer4_gfclk_mux: timer4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1048>;
-	};
-
-	timer9_gfclk_mux: timer9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1050>;
-	};
-};
-
-&cm_core_clockdomains {
-	l3init_clkdm: l3init_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_ck: auxclk0_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
-	};
-
-	auxclk0_ck: auxclk0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk0_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0310>;
-	};
-
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_ck: auxclk1_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
-	};
-
-	auxclk1_ck: auxclk1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk1_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0314>;
-	};
-
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_ck: auxclk2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
-	};
-
-	auxclk2_ck: auxclk2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk2_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0318>;
-	};
-
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_ck: auxclk3_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
-	};
-
-	auxclk3_ck: auxclk3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk3_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x031c>;
-	};
-
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_ck: auxclk4_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
-	};
-
-	auxclk4_ck: auxclk4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk4_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0320>;
-	};
-
-	auxclkreq0_ck: auxclkreq0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0210>;
-	};
-
-	auxclkreq1_ck: auxclkreq1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	auxclkreq2_ck: auxclkreq2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0218>;
-	};
-
-	auxclkreq3_ck: auxclkreq3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-};
diff --git a/src/arm/orion5x-lacie-d2-network.dts b/src/arm/orion5x-lacie-d2-network.dts
deleted file mode 100644
index c701e8d16bbb..000000000000
--- a/src/arm/orion5x-lacie-d2-network.dts
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie d2 Network";
-	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
-			label = "Front Push Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_on {
-			label = "Power rocker switch (on|auto)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_off {
-			label = "Power rocker switch (auto|off)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata1_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-                #address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372b";
-		reg = <0x32>;
-	};
-
-	fan@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-
-		/* Not enough HW info */
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
-	pinctrl-names = "default";
-
-	pmx_board_id: pmx-board-id {
-		marvell,pins = "mpp0", "mpp1", "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp8", "mpp9", "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_fail: pmx-fan-fail {
-		marvell,pins = "mpp5";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP6: Red front LED
-	 * MPP16: Blue front LED blink control
-	 */
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp6", "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_led_active: pmx-sata0-led-active {
-		marvell,pins = "mpp14";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata0_power: pmx-sata0-power {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata1_led_active: pmx-sata1-led-active {
-		marvell,pins = "mpp15";
-		marvell,function = "sata1";
-	};
-
-	pmx_sata1_power: pmx-sata1-power {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * Non MPP GPIOs:
-	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
-	 *  GPIO 23: Blue front LED off
-	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
-	 */
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0_led_active
-		     &pmx_sata1_led_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts b/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
deleted file mode 100644
index 89ff404a528c..000000000000
--- a/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie Ethernet Disk mini V2";
-	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_power_button>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
-			label = "Power-on Switch";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_power_led>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "power:blue";
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
-	pinctrl-names = "default";
-
-	pmx_power_button: pmx-power-button {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led: pmx-power-led {
-		marvell,pins = "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led_ctrl: pmx-power-led-ctrl {
-		marvell,pins = "mpp17";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x-maxtor-shared-storage-2.dts b/src/arm/orion5x-maxtor-shared-storage-2.dts
deleted file mode 100644
index ff3484904294..000000000000
--- a/src/arm/orion5x-maxtor-shared-storage-2.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "Maxtor Shared Storage II";
-	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power {
-			label = "Power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x40000>;
-		bank-width = <1>;
-                #address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@68 {
-		compatible = "st,m41t81";
-		reg = <0x68>;
-		pinctrl-0 = <&pmx_rtc>;
-		pinctrl-names = "default";
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_leds &pmx_misc>;
-	pinctrl-names = "default";
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp11", "mpp12";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP0: Power LED
-	 * MPP1: Error LED
-	 */
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp0", "mpp1";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP4: HDD ind. (Single/Dual)
-	 * MPP5: HD0 5V control
-	 * MPP6: HD0 12V control
-	 * MPP7: HD1 5V control
-	 * MPP8: HD1 12V control
-	 */
-	pmx_misc: pmx-misc {
-		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_led_active: pmx-sata0-led-active {
-		marvell,pins = "mpp14";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata1_led_active: pmx-sata1-led-active {
-		marvell,pins = "mpp15";
-		marvell,function = "sata1";
-	};
-
-	/*
-	 * Non MPP GPIOs:
-	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
-	 *  GPIO 23: Blue front LED off
-	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
-	 */
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0_led_active
-		     &pmx_sata1_led_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x-mv88f5182.dtsi b/src/arm/orion5x-mv88f5182.dtsi
deleted file mode 100644
index d1ed71c60209..000000000000
--- a/src/arm/orion5x-mv88f5182.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "orion5x.dtsi"
-
-/ {
-	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	soc {
-		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
-
-		internal-regs {
-			pinctrl: pinctrl@10000 {
-				compatible = "marvell,88f5182-pinctrl";
-				reg = <0x10000 0x8>, <0x10050 0x4>;
-
-				pmx_sata0: pmx-sata0 {
-					marvell,pins = "mpp12", "mpp14";
-					marvell,function = "sata0";
-				};
-
-				pmx_sata1: pmx-sata1 {
-					marvell,pins = "mpp13", "mpp15";
-					marvell,function = "sata1";
-				};
-			};
-
-			core_clk: core-clocks@10030 {
-				compatible = "marvell,mv88f5182-core-clock";
-				reg = <0x10010 0x4>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x1500 0x20>;
-			};
-		};
-	};
-};
diff --git a/src/arm/orion5x-rd88f5182-nas.dts b/src/arm/orion5x-rd88f5182-nas.dts
deleted file mode 100644
index 6fb052507b36..000000000000
--- a/src/arm/orion5x-rd88f5182-nas.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "Marvell Reference Design 88F5182 NAS";
-	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
-			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_debug_led>;
-		pinctrl-names = "default";
-
-		led@0 {
-			label = "rd88f5182:cpu";
-			linux,default-trigger = "heartbeat";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-	};
-};
-
-&devbus_cs1 {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x1000000>;
-		bank-width = <1>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@68 {
-		pinctrl-0 = <&pmx_rtc>;
-		pinctrl-names = "default";
-		compatible = "dallas,ds1338";
-		reg = <0x68>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
-		&pmx_pci_gpios>;
-	pinctrl-names = "default";
-
-	/*
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	pmx_debug_led: pmx-debug_led {
-		marvell,pins = "mpp0";
-		marvell,function = "gpio";
-	};
-
-	pmx_reset_switch: pmx-reset-switch {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_misc_gpios: pmx-misc-gpios {
-		marvell,pins = "mpp4", "mpp5";
-		marvell,function = "gpio";
-	};
-
-	pmx_pci_gpios: pmx-pci-gpios {
-		marvell,pins = "mpp6", "mpp7";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x.dtsi b/src/arm/orion5x.dtsi
deleted file mode 100644
index 75cd01bd6024..000000000000
--- a/src/arm/orion5x.dtsi
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Orion5x SoC";
-	compatible = "marvell,orion5x";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		gpio0 = &gpio0;
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-
-		devbus_bootcs: devbus-bootcs {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs0: devbus-cs0 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs1: devbus-cs1 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs2: devbus-cs2 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			gpio0: gpio@10100 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0x10100 0x40>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <6>, <7>, <8>, <9>;
-			};
-
-			spi: spi@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				reg = <0x10600 0x28>;
-				status = "disabled";
-			};
-
-			i2c: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <5>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <3>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <4>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <4>;
-			};
-
-			intc: interrupt-controller@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x08>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
-				clocks = <&core_clk 0>;
-			};
-
-			wdt: wdt@20300 {
-				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <3>;
-				status = "okay";
-			};
-
-			ehci0: ehci@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <17>;
-				status = "disabled";
-			};
-
-			xor: dma-controller@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				status = "okay";
-
-				xor00 {
-				      interrupts = <30>;
-				      dmacap,memcpy;
-				      dmacap,xor;
-				};
-				xor01 {
-				      interrupts = <31>;
-				      dmacap,memcpy;
-				      dmacap,xor;
-				      dmacap,memset;
-				};
-			};
-
-			eth: ethernet-controller@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethport: ethernet-port@0 {
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <21>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-					/* set phy-handle property in board file */
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <22>;
-				status = "disabled";
-
-				/* add phy nodes in board file */
-			};
-
-			sata: sata@80000 {
-				compatible = "marvell,orion-sata";
-				reg = <0x80000 0x5000>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			ehci1: ehci@a0000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0xa0000 0x1000>;
-				interrupts = <12>;
-				status = "disabled";
-			};
-		};
-
-		cesa: crypto@90000 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
-			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <28>;
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/phy3250.dts b/src/arm/phy3250.dts
deleted file mode 100644
index 90fdbd77f274..000000000000
--- a/src/arm/phy3250.dts
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * PHYTEC phyCORE-LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "lpc32xx.dtsi"
-
-/ {
-	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
-	compatible = "phytec,phy3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
-		clcd@31040000 {
-			status = "okay";
-		};
-
-		/* 64MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <40000000>;
-			nxp,whold = <100000000>;
-			nxp,wsetup = <100000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <40000000>;
-			nxp,rhold = <66666666>;
-			nxp,rsetup = <100000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "phy3250-boot";
-				reg = <0x00000000 0x00064000>;
-				read-only;
-			};
-
-			mtd1@00064000 {
-				label = "phy3250-uboot";
-				reg = <0x00064000 0x00190000>;
-				read-only;
-			};
-
-			mtd2@001f4000 {
-				label = "phy3250-ubt-prms";
-				reg = <0x001f4000 0x00010000>;
-			};
-
-			mtd3@00204000 {
-				label = "phy3250-kernel";
-				reg = <0x00204000 0x00400000>;
-			};
-
-			mtd4@00604000 {
-				label = "phy3250-rootfs";
-				reg = <0x00604000 0x039fc000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				pcf8563: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2c {
-					compatible = "nxp,isp1301";
-					reg = <0x2c>;
-				};
-			};
-
-			ssp0: ssp@20084000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				num-cs = <1>;
-				cs-gpios = <&gpio 3 5 0>;
-
-				eeprom: at25@0 {
-					pl022,interface = <0>;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <1>;
-					pl022,tx-level-trig = <1>;
-					pl022,ctrl-len = <11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-
-					at25,byte-len = <0x8000>;
-					at25,addr-mode = <2>;
-					at25,page-size = <64>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <5000000>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&gpio 3 0 0>;
-				cd-gpios = <&gpio 3 1 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart2: serial@40018000 {
-				status = "okay";
-			};
-
-			tsc@40048000 {
-				status = "okay";
-			};
-
-			key@40050000 {
-				status = "okay";
-				keypad,num-rows = <1>;
-				keypad,num-columns = <1>;
-				nxp,debounce-delay-ms = <3>;
-				nxp,scan-delay-ms = <34>;
-				linux,keymap = <0x00000002>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 { /* red */
-			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
-			default-state = "off";
-		};
-
-		led1 { /* green */
-			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc3x2.dtsi b/src/arm/picoxcell-pc3x2.dtsi
deleted file mode 100644
index 533919e96eae..000000000000
--- a/src/arm/picoxcell-pc3x2.dtsi
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-/ {
-	model = "Picochip picoXcell PC3X2";
-	compatible = "picochip,pc3x2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1176jz-s";
-			device_type = "cpu";
-			clock-frequency = <400000000>;
-			d-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-line-size = <32>;
-			i-cache-size = <32768>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pclk: clock@0 {
-			compatible = "fixed-clock";
-			clock-outputs = "bus", "pclk";
-			clock-frequency = <200000000>;
-			ref-clock = <&ref_clk>, "ref";
-		};
-	};
-
-	paxi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80000000 0x400000>;
-
-		emac: gem@30000 {
-			compatible = "cadence,gem";
-			reg = <0x30000 0x10000>;
-			interrupts = <31>;
-		};
-
-		dmac1: dmac@40000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x40000 0x10000>;
-			interrupts = <25>;
-		};
-
-		dmac2: dmac@50000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x50000 0x10000>;
-			interrupts = <26>;
-		};
-
-		vic0: interrupt-controller@60000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x60000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@64000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x64000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fuse: picoxcell-fuse@80000 {
-			compatible = "picoxcell,fuse-pc3x2";
-			reg = <0x80000 0x10000>;
-		};
-
-		ssi: picoxcell-spi@90000 {
-			compatible = "picoxcell,spi";
-			reg = <0x90000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <10>;
-		};
-
-		ipsec: spacc@100000 {
-			compatible = "picochip,spacc-ipsec";
-			reg = <0x100000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <24>;
-			ref-clock = <&pclk>, "ref";
-		};
-
-		srtp: spacc@140000 {
-			compatible = "picochip,spacc-srtp";
-			reg = <0x140000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>;
-		};
-
-		l2_engine: spacc@180000 {
-			compatible = "picochip,spacc-l2";
-			reg = <0x180000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <22>;
-			ref-clock = <&pclk>, "ref";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x200000 0x80000>;
-
-			rtc0: rtc@00000 {
-				compatible = "picochip,pc3x2-rtc";
-				clock-freq = <200000000>;
-				reg = <0x00000 0xf>;
-				interrupt-parent = <&vic1>;
-				interrupts = <8>;
-			};
-
-			timer0: timer@10000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <4>;
-				clock-freq = <200000000>;
-				reg = <0x10000 0x14>;
-			};
-
-			timer1: timer@10014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <5>;
-				clock-freq = <200000000>;
-				reg = <0x10014 0x14>;
-			};
-
-			timer2: timer@10028 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <6>;
-				clock-freq = <200000000>;
-				reg = <0x10028 0x14>;
-			};
-
-			timer3: timer@1003c {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <7>;
-				clock-freq = <200000000>;
-				reg = <0x1003c 0x14>;
-			};
-
-			gpio: gpio@20000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x20000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg-io-width = <4>;
-
-				banka: gpio-controller@0 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x50>;
-					regoffset-set = <0x00>;
-					regoffset-dirout = <0x04>;
-				};
-
-				bankb: gpio-controller@1 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x54>;
-					regoffset-set = <0x0c>;
-					regoffset-dirout = <0x10>;
-				};
-			};
-
-			uart0: uart@30000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x30000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <10>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			uart1: uart@40000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x40000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <9>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			wdog: watchdog@50000 {
-				compatible = "snps,dw-apb-wdg";
-				reg = <0x50000 0x10000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <11>;
-				bus-clock = <&pclk>, "bus";
-			};
-		};
-	};
-
-	rwid-axi {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		ebi@50000000 {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x40000000 0x08000000
-				  1 0 0x48000000 0x08000000
-				  2 0 0x50000000 0x08000000
-				  3 0 0x58000000 0x08000000>;
-		};
-
-		axi2pico@c0000000 {
-			compatible = "picochip,axi2pico-pc3x2";
-			reg = <0xc0000000 0x10000>;
-			interrupts = <13 14 15 16 17 18 19 20 21>;
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc3x3.dtsi b/src/arm/picoxcell-pc3x3.dtsi
deleted file mode 100644
index ab3e80085511..000000000000
--- a/src/arm/picoxcell-pc3x3.dtsi
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-/ {
-	model = "Picochip picoXcell PC3X3";
-	compatible = "picochip,pc3x3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1176jz-s";
-			device_type = "cpu";
-			cpu-clock = <&arm_clk>, "cpu";
-			d-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-line-size = <32>;
-			i-cache-size = <32768>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clkgate: clkgate@800a0048 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x800a0048 4>;
-			compatible = "picochip,pc3x3-clk-gate";
-
-			tzprot_clk: clock@0 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <0>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			spi_clk: clock@1 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <1>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			dmac0_clk: clock@2 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <2>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			dmac1_clk: clock@3 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <3>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			ebi_clk: clock@4 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <4>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			ipsec_clk: clock@5 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <5>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			l2_clk: clock@6 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <6>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			trng_clk: clock@7 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <7>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			fuse_clk: clock@8 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <8>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			otp_clk: clock@9 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <9>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-		};
-
-		arm_clk: clock@11 {
-			compatible = "picochip,pc3x3-pll";
-			reg = <0x800a0050 0x8>;
-			picochip,min-freq = <140000000>;
-			picochip,max-freq = <700000000>;
-			ref-clock = <&ref_clk>, "ref";
-			clock-outputs = "cpu";
-		};
-
-		pclk: clock@12 {
-			compatible = "fixed-clock";
-			clock-outputs = "bus", "pclk";
-			clock-frequency = <200000000>;
-			ref-clock = <&ref_clk>, "ref";
-		};
-	};
-
-	paxi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80000000 0x400000>;
-
-		emac: gem@30000 {
-			compatible = "cadence,gem";
-			reg = <0x30000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <31>;
-		};
-
-		dmac1: dmac@40000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x40000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <25>;
-		};
-
-		dmac2: dmac@50000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x50000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <26>;
-		};
-
-		vic0: interrupt-controller@60000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x60000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@64000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x64000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fuse: picoxcell-fuse@80000 {
-			compatible = "picoxcell,fuse-pc3x3";
-			reg = <0x80000 0x10000>;
-		};
-
-		ssi: picoxcell-spi@90000 {
-			compatible = "picoxcell,spi";
-			reg = <0x90000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <10>;
-		};
-
-		ipsec: spacc@100000 {
-			compatible = "picochip,spacc-ipsec";
-			reg = <0x100000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <24>;
-			ref-clock = <&ipsec_clk>, "ref";
-		};
-
-		srtp: spacc@140000 {
-			compatible = "picochip,spacc-srtp";
-			reg = <0x140000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>;
-		};
-
-		l2_engine: spacc@180000 {
-			compatible = "picochip,spacc-l2";
-			reg = <0x180000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <22>;
-			ref-clock = <&l2_clk>, "ref";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x200000 0x80000>;
-
-			rtc0: rtc@00000 {
-				compatible = "picochip,pc3x2-rtc";
-				clock-freq = <200000000>;
-				reg = <0x00000 0xf>;
-				interrupt-parent = <&vic0>;
-				interrupts = <8>;
-			};
-
-			timer0: timer@10000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <4>;
-				clock-freq = <200000000>;
-				reg = <0x10000 0x14>;
-			};
-
-			timer1: timer@10014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <5>;
-				clock-freq = <200000000>;
-				reg = <0x10014 0x14>;
-			};
-
-			gpio: gpio@20000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x20000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg-io-width = <4>;
-
-				banka: gpio-controller@0 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x50>;
-					regoffset-set = <0x00>;
-					regoffset-dirout = <0x04>;
-				};
-
-				bankb: gpio-controller@1 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <16>;
-
-					regoffset-dat = <0x54>;
-					regoffset-set = <0x0c>;
-					regoffset-dirout = <0x10>;
-				};
-
-				bankd: gpio-controller@2 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <30>;
-
-					regoffset-dat = <0x5c>;
-					regoffset-set = <0x24>;
-					regoffset-dirout = <0x28>;
-				};
-			};
-
-			uart0: uart@30000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x30000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <10>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			uart1: uart@40000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x40000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <9>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			wdog: watchdog@50000 {
-				compatible = "snps,dw-apb-wdg";
-				reg = <0x50000 0x10000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <11>;
-				bus-clock = <&pclk>, "bus";
-			};
-
-			timer2: timer@60000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <6>;
-				clock-freq = <200000000>;
-				reg = <0x60000 0x14>;
-			};
-
-			timer3: timer@60014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <7>;
-				clock-freq = <200000000>;
-				reg = <0x60014 0x14>;
-			};
-		};
-	};
-
-	rwid-axi {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		ebi@50000000 {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x40000000 0x08000000
-				  1 0 0x48000000 0x08000000
-				  2 0 0x50000000 0x08000000
-				  3 0 0x58000000 0x08000000>;
-		};
-
-		axi2pico@c0000000 {
-			compatible = "picochip,axi2pico-pc3x3";
-			reg = <0xc0000000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <13 14 15 16 17 18 19 20 21>;
-		};
-
-		otp@ffff8000 {
-			compatible = "picochip,otp-pc3x3";
-			reg = <0xffff8000 0x8000>;
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc7302-pc3x2.dts b/src/arm/picoxcell-pc7302-pc3x2.dts
deleted file mode 100644
index 1297414dd649..000000000000
--- a/src/arm/picoxcell-pc7302-pc3x2.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/include/ "picoxcell-pc3x2.dtsi"
-/ {
-	model = "Picochip PC7302 (PC3X2)";
-	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-	chosen {
-		linux,stdout-path = &uart0;
-	};
-
-	clocks {
-		ref_clk: clock@1 {
-			compatible = "fixed-clock";
-			clock-outputs = "ref";
-			clock-frequency = <20000000>;
-		};
-	};
-
-	rwid-axi {
-		ebi@50000000 {
-			nand: gpio-nand@2,0 {
-				compatible = "gpio-control-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <2 0x0000 0x1000>;
-				bus-clock = <&pclk>, "bus";
-				gpio-control-nand,io-sync-reg =
-					<0x00000000 0x80220000>;
-
-				gpios = <&banka 1 0	/* rdy */
-					 &banka 2 0 	/* nce */
-					 &banka 3 0 	/* ale */
-					 &banka 4 0 	/* cle */
-					 0		/* nwp */>;
-
-				boot@100000 {
-					label = "Boot";
-					reg = <0x100000 0x80000>;
-				};
-
-				redundant-boot@200000 {
-					label = "Redundant Boot";
-					reg = <0x200000 0x80000>;
-				};
-
-				boot-env@300000 {
-					label = "Boot Evironment";
-					reg = <0x300000 0x20000>;
-				};
-
-				redundant-boot-env@320000 {
-					label = "Redundant Boot Environment";
-					reg = <0x300000 0x20000>;
-				};
-
-				kernel@380000 {
-					label = "Kernel";
-					reg = <0x380000 0x800000>;
-				};
-
-				fs@b80000 {
-					label = "File System";
-					reg = <0xb80000 0xf480000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc7302-pc3x3.dts b/src/arm/picoxcell-pc7302-pc3x3.dts
deleted file mode 100644
index 9e317a4f431c..000000000000
--- a/src/arm/picoxcell-pc7302-pc3x3.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/include/ "picoxcell-pc3x3.dtsi"
-/ {
-	model = "Picochip PC7302 (PC3X3)";
-	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-	chosen {
-		linux,stdout-path = &uart0;
-	};
-
-	clocks {
-		ref_clk: clock@10 {
-			compatible = "fixed-clock";
-			clock-outputs = "ref";
-			clock-frequency = <20000000>;
-		};
-
-		clkgate: clkgate@800a0048 {
-			clock@4 {
-				picochip,clk-no-disable;
-			};
-		};
-	};
-
-	rwid-axi {
-		ebi@50000000 {
-			nand: gpio-nand@2,0 {
-				compatible = "gpio-control-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <2 0x0000 0x1000>;
-				bus-clock = <&ebi_clk>, "bus";
-				gpio-control-nand,io-sync-reg =
-					<0x00000000 0x80220000>;
-
-				gpios = <&banka 1 0	/* rdy */
-					 &banka 2 0 	/* nce */
-					 &banka 3 0 	/* ale */
-					 &banka 4 0 	/* cle */
-					 0		/* nwp */>;
-
-				boot@100000 {
-					label = "Boot";
-					reg = <0x100000 0x80000>;
-				};
-
-				redundant-boot@200000 {
-					label = "Redundant Boot";
-					reg = <0x200000 0x80000>;
-				};
-
-				boot-env@300000 {
-					label = "Boot Evironment";
-					reg = <0x300000 0x20000>;
-				};
-
-				redundant-boot-env@320000 {
-					label = "Redundant Boot Environment";
-					reg = <0x300000 0x20000>;
-				};
-
-				kernel@380000 {
-					label = "Kernel";
-					reg = <0x380000 0x800000>;
-				};
-
-				fs@b80000 {
-					label = "File System";
-					reg = <0xb80000 0xf480000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/prima2-evb.dts b/src/arm/prima2-evb.dts
deleted file mode 100644
index 57286b4e7b87..000000000000
--- a/src/arm/prima2-evb.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * DTS file for CSR SiRFprimaII Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "prima2.dtsi"
-
-/ {
-	model = "CSR SiRFprimaII Evaluation Board";
-	compatible = "sirf,prima2", "sirf,prima2-cb";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart@b0060000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins_a>;
-			};
-			spi@b00d0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins_a>;
-			};
-			spi@b0170000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-			};
-		};
-	};
-};
diff --git a/src/arm/prima2.dtsi b/src/arm/prima2.dtsi
deleted file mode 100644
index 963b7e54ab15..000000000000
--- a/src/arm/prima2.dtsi
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * DTS file for CSR SiRFprimaII SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,prima2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			clocks = <&clks 12>;
-			operating-points = <
-				/* kHz    uV */
-				200000  1025000
-				400000  1025000
-				664000  1050000
-				800000  1100000
-			>;
-			clock-latency = <150000>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x80040000 0x1000>;
-			interrupts = <59>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0 0x40000000>;
-		};
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clks: clock-controller@88000000 {
-				compatible = "sirf,prima2-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-				#clock-cells = <1>;
-			};
-
-			rstc: reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-				#reset-cells = <1>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-
-			cphifbg@88030000 {
-				compatible = "sirf,prima2-cphifbg";
-				reg = <0x88030000 0x1000>;
-				clocks = <&clks 42>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x2000>;
-				interrupts = <27>;
-				clocks = <&clks 5>;
-			};
-
-			memc-monitor {
-				compatible = "sirf,prima2-memcmon";
-				reg = <0x90002000 0x200>;
-				interrupts = <4>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			display@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-				clocks = <&clks 35>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,prima2-video-codec";
-				reg = <0xa0000000 0x8000000>;
-				interrupts = <5>;
-				clocks = <&clks 33>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-				clocks = <&clks 9>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-				clocks = <&clks 8>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>,
-			       <0x56000000 0x56000000 0x1b00000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-				clocks = <&clks 11>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-				clocks = <&clks 26>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-				clocks = <&clks 27>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x1000>;
-				interrupts = <17>;
-				fifosize = <128>;
-				clocks = <&clks 13>;
-				dmas = <&dmac1 5>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x1000>;
-				interrupts = <18>;
-				fifosize = <32>;
-				clocks = <&clks 14>;
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x1000>;
-				interrupts = <19>;
-				fifosize = <128>;
-				clocks = <&clks 15>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-				fifosize = <128>;
-				clocks = <&clks 28>;
-				dmas = <&dmac1 1>, <&dmac1 2>;
-				dma-names = "rx", "tx";
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-				fifosize = <128>;
-				clocks = <&clks 29>;
-				dmas = <&dmac0 14>, <&dmac0 15>;
-				dma-names = "rx", "tx";
-			};
-
-			usp2: usp@b00a0000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb00a0000 0x10000>;
-				interrupts = <22>;
-				fifosize = <128>;
-				clocks = <&clks 30>;
-				dmas = <&dmac0 10>, <&dmac0 11>;
-				dma-names = "rx", "tx";
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-				clocks = <&clks 24>;
-				#dma-cells = <1>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				#dma-cells = <1>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-				clocks = <&clks 31>;
-				interrupts = <14>;
-				sirf,vip-dma-rx-channel = <16>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac1 9>,
-				     <&dmac1 4>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 19>;
-				status = "disabled";
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac0 12>,
-				     <&dmac0 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 20>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-				clocks = <&clks 17>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-				clocks = <&clks 18>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-				clocks = <&clks 16>;
-			};
-
-			gpio: pinctrl@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,prima2-pinctrl";
-				reg = <0xb0120000 0x10000>;
-				interrupts = <43 44 45 46 47>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0@0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0@1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0@2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0@0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0@0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart0_noflow_pins_a: uart0@1 {
-					uart {
-						sirf,pins = "uart0_nostreamctrlgrp";
-						sirf,function = "uart0_nostreamctrl";
-					};
-				};
-				uart1_pins_a: uart1@0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2@0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2@1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0@0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1@0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0@0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1@0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-                                pwm0_pins_a: pwm0@0 {
-                                        pwm {
-                                                sirf,pins = "pwm0grp";
-                                                sirf,function = "pwm0";
-                                        };
-                                };
-                                pwm1_pins_a: pwm1@0 {
-                                        pwm {
-                                                sirf,pins = "pwm1grp";
-                                                sirf,function = "pwm1";
-                                        };
-                                };
-                                pwm2_pins_a: pwm2@0 {
-                                        pwm {
-                                                sirf,pins = "pwm2grp";
-                                                sirf,function = "pwm2";
-                                        };
-                                };
-                                pwm3_pins_a: pwm3@0 {
-                                        pwm {
-                                                sirf,pins = "pwm3grp";
-                                                sirf,function = "pwm3";
-                                        };
-                                };
-                                gps_pins_a: gps@0 {
-                                        gps {
-                                                sirf,pins = "gpsgrp";
-                                                sirf,function = "gps";
-                                        };
-                                };
-                                vip_pins_a: vip@0 {
-                                        vip {
-                                                sirf,pins = "vipgrp";
-                                                sirf,function = "vip";
-                                        };
-                                };
-                                sdmmc0_pins_a: sdmmc0@0 {
-                                        sdmmc0 {
-                                                sirf,pins = "sdmmc0grp";
-                                                sirf,function = "sdmmc0";
-                                        };
-                                };
-                                sdmmc1_pins_a: sdmmc1@0 {
-                                        sdmmc1 {
-                                                sirf,pins = "sdmmc1grp";
-                                                sirf,function = "sdmmc1";
-                                        };
-                                };
-                                sdmmc2_pins_a: sdmmc2@0 {
-                                        sdmmc2 {
-                                                sirf,pins = "sdmmc2grp";
-                                                sirf,function = "sdmmc2";
-                                        };
-                                };
-                                sdmmc3_pins_a: sdmmc3@0 {
-                                        sdmmc3 {
-                                                sirf,pins = "sdmmc3grp";
-                                                sirf,function = "sdmmc3";
-                                        };
-                                };
-                                sdmmc4_pins_a: sdmmc4@0 {
-                                        sdmmc4 {
-                                                sirf,pins = "sdmmc4grp";
-                                                sirf,function = "sdmmc4";
-                                        };
-                                };
-                                sdmmc5_pins_a: sdmmc5@0 {
-                                        sdmmc5 {
-                                                sirf,pins = "sdmmc5grp";
-                                                sirf,function = "sdmmc5";
-                                        };
-                                };
-                                i2s_pins_a: i2s@0 {
-                                        i2s {
-                                                sirf,pins = "i2sgrp";
-                                                sirf,function = "i2s";
-                                        };
-                                };
-                                ac97_pins_a: ac97@0 {
-                                        ac97 {
-                                                sirf,pins = "ac97grp";
-                                                sirf,function = "ac97";
-                                        };
-                                };
-                                nand_pins_a: nand@0 {
-                                        nand {
-                                                sirf,pins = "nandgrp";
-                                                sirf,function = "nand";
-                                        };
-                                };
-                                usp0_pins_a: usp0@0 {
-                                        usp0 {
-                                                sirf,pins = "usp0grp";
-                                                sirf,function = "usp0";
-                                        };
-                                };
-				usp0_uart_nostreamctrl_pins_a: usp0@1 {
-                                        usp0 {
-                                                sirf,pins =
-							"usp0_uart_nostreamctrl_grp";
-                                                sirf,function =
-							"usp0_uart_nostreamctrl";
-                                        };
-                                };
-                                usp0_only_utfs_pins_a: usp0@2 {
-                                        usp0 {
-                                                sirf,pins = "usp0_only_utfs_grp";
-                                                sirf,function = "usp0_only_utfs";
-                                        };
-                                };
-                                usp0_only_urfs_pins_a: usp0@3 {
-                                        usp0 {
-                                                sirf,pins = "usp0_only_urfs_grp";
-                                                sirf,function = "usp0_only_urfs";
-                                        };
-                                };
-                                usp1_pins_a: usp1@0 {
-                                        usp1 {
-                                                sirf,pins = "usp1grp";
-                                                sirf,function = "usp1";
-                                        };
-                                };
-				usp1_uart_nostreamctrl_pins_a: usp1@1 {
-                                        usp1 {
-                                                sirf,pins =
-							"usp1_uart_nostreamctrl_grp";
-                                                sirf,function =
-							"usp1_uart_nostreamctrl";
-                                        };
-                                };
-                                usp2_pins_a: usp2@0 {
-                                        usp2 {
-                                                sirf,pins = "usp2grp";
-                                                sirf,function = "usp2";
-                                        };
-                                };
-				usp2_uart_nostreamctrl_pins_a: usp2@1 {
-                                        usp2 {
-                                                sirf,pins =
-							"usp2_uart_nostreamctrl_grp";
-                                                sirf,function =
-							"usp2_uart_nostreamctrl";
-                                        };
-                                };
-                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
-                                        usb0_utmi_drvbus {
-                                                sirf,pins = "usb0_utmi_drvbusgrp";
-                                                sirf,function = "usb0_utmi_drvbus";
-                                        };
-                                };
-                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
-                                        usb1_utmi_drvbus {
-                                                sirf,pins = "usb1_utmi_drvbusgrp";
-                                                sirf,function = "usb1_utmi_drvbus";
-                                        };
-                                };
-                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
-                                        usb1_dp_dn {
-                                                sirf,pins = "usb1_dp_dngrp";
-                                                sirf,function = "usb1_dp_dn";
-                                        };
-                                };
-                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
-                                        uart1_route_io_usb1 {
-                                                sirf,pins = "uart1_route_io_usb1grp";
-                                                sirf,function = "uart1_route_io_usb1";
-                                        };
-                                };
-                                warm_rst_pins_a: warm_rst@0 {
-                                        warm_rst {
-                                                sirf,pins = "warm_rstgrp";
-                                                sirf,function = "warm_rst";
-                                        };
-                                };
-                                pulse_count_pins_a: pulse_count@0 {
-                                        pulse_count {
-                                                sirf,pins = "pulse_countgrp";
-                                                sirf,function = "pulse_count";
-                                        };
-                                };
-                                cko0_pins_a: cko0@0 {
-                                        cko0 {
-                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0";
-                                        };
-                                };
-                                cko1_pins_a: cko1@0 {
-                                        cko1 {
-                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1";
-                                        };
-                                };
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-				clocks = <&clks 21>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-				clocks = <&clks 22>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-				clocks = <&clks 23>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <8>;
-					clocks = <&clks 36>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 36>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					clocks = <&clks 37>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					clocks = <&clks 37>;
-				};
-
-				sd4: sdhci@56400000 {
-					cell-index = <4>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56400000 0x100000>;
-					interrupts = <39>;
-					status = "disabled";
-					clocks = <&clks 38>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-					clocks = <&clks 38>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			minigpsrtc@2000 {
-				compatible = "sirf,prima2-minigpsrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-				clocks = <&clks 40>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-				clocks = <&clks 41>;
-			};
-
-			sata@b00f0000 {
-				compatible = "synopsys,dwc-ahsata";
-				reg = <0xb8020000 0x10000>;
-				interrupts = <37>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-				clocks = <&clks 7>;
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa168-aspenite.dts b/src/arm/pxa168-aspenite.dts
deleted file mode 100644
index e762facb3fa4..000000000000
--- a/src/arm/pxa168-aspenite.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-/include/ "pxa168.dtsi"
-
-/ {
-	model = "Marvell PXA168 Aspenite Development Board";
-	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x04000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart1: uart@d4017000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa168.dtsi b/src/arm/pxa168.dtsi
deleted file mode 100644
index 975dad21ac38..000000000000
--- a/src/arm/pxa168.dtsi
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4026000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4026000 0x1000>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa27x.dtsi b/src/arm/pxa27x.dtsi
deleted file mode 100644
index a70546945985..000000000000
--- a/src/arm/pxa27x.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-/* The pxa3xx skeleton simply augments the 2xx version */
-/include/ "pxa2xx.dtsi"
-
-/ {
-	model = "Marvell PXA27x familiy SoC";
-	compatible = "marvell,pxa27x";
-
-	pxabus {
-		pxairq: interrupt-controller@40d00000 {
-			marvell,intc-priority;
-			marvell,intc-nr-irqs = <34>;
-		};
-
-		pwm0: pwm@40b00000 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40b00000 0x10>;
-			#pwm-cells = <1>;
-		};
-
-		pwm1: pwm@40b00010 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40b00010 0x10>;
-			#pwm-cells = <1>;
-		};
-
-		pwm2: pwm@40c00000 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40c00000 0x10>;
-			#pwm-cells = <1>;
-		};
-
-		pwm3: pwm@40c00010 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40c00010 0x10>;
-			#pwm-cells = <1>;
-		};
-	};
-};
diff --git a/src/arm/pxa2xx.dtsi b/src/arm/pxa2xx.dtsi
deleted file mode 100644
index a5e90f078aa9..000000000000
--- a/src/arm/pxa2xx.dtsi
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Marvell PXA2xx family SoC";
-	compatible = "marvell,pxa2xx";
-	interrupt-parent = <&pxairq>;
-
-	aliases {
-		serial0 = &ffuart;
-		serial1 = &btuart;
-		serial2 = &stuart;
-		serial3 = &hwuart;
-		i2c0 = &pwri2c;
-		i2c1 = &pxai2c1;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-		cpu {
-			compatible = "marvell,xscale";
-			device_type = "cpu";
-		};
-	};
-
-	pxabus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pxairq: interrupt-controller@40d00000 {
-			#interrupt-cells = <1>;
-			compatible = "marvell,pxa-intc";
-			interrupt-controller;
-			interrupt-parent;
-			marvell,intc-nr-irqs = <32>;
-			reg = <0x40d00000 0xd0>;
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "mrvl,pxa-gpio";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			reg = <0x40e00000 0x10000>;
-			gpio-controller;
-			#gpio-cells = <0x2>;
-			interrupts = <10>;
-			interrupt-names = "gpio_mux";
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-			ranges;
-
-			gcb0: gpio@40e00000 {
-				reg = <0x40e00000 0x4>;
-			};
-
-			gcb1: gpio@40e00004 {
-				reg = <0x40e00004 0x4>;
-			};
-
-			gcb2: gpio@40e00008 {
-				reg = <0x40e00008 0x4>;
-			};
-			gcb3: gpio@40e0000c {
-				reg = <0x40e0000c 0x4>;
-			};
-		};
-
-		ffuart: uart@40100000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40100000 0x30>;
-			interrupts = <22>;
-			status = "disabled";
-		};
-
-		btuart: uart@40200000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40200000 0x30>;
-			interrupts = <21>;
-			status = "disabled";
-		};
-
-		stuart: uart@40700000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40700000 0x30>;
-			interrupts = <20>;
-			status = "disabled";
-		};
-
-		hwuart: uart@41100000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x41100000 0x30>;
-			interrupts = <7>;
-			status = "disabled";
-		};
-
-		pxai2c1: i2c@40301680 {
-			compatible = "mrvl,pxa-i2c";
-			reg = <0x40301680 0x30>;
-			interrupts = <18>;
-			#address-cells = <0x1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb0: ohci@4c000000 {
-			compatible = "mrvl,pxa-ohci";
-			reg = <0x4c000000 0x10000>;
-			interrupts = <3>;
-			status = "disabled";
-		};
-
-		mmc0: mmc@41100000 {
-			compatible = "mrvl,pxa-mmc";
-			reg = <0x41100000 0x1000>;
-			interrupts = <23>;
-			status = "disabled";
-		};
-
-		rtc@40900000 {
-			compatible = "marvell,pxa-rtc";
-			reg = <0x40900000 0x3c>;
-			interrupts = <30 31>;
-		};
-	};
-};
diff --git a/src/arm/pxa3xx.dtsi b/src/arm/pxa3xx.dtsi
deleted file mode 100644
index 83bb0eff697b..000000000000
--- a/src/arm/pxa3xx.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/* The pxa3xx skeleton simply augments the 2xx version */
-/include/ "pxa2xx.dtsi"
-
-/ {
-	model = "Marvell PXA3xx familiy SoC";
-	compatible = "marvell,pxa3xx";
-
-	pxabus {
-		pwri2c: i2c@40f500c0 {
-			compatible = "mrvl,pwri2c";
-			reg = <0x40f500c0 0x30>;
-			interrupts = <6>;
-			#address-cells = <0x1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		nand0: nand@43100000 {
-			compatible = "marvell,pxa3xx-nand";
-			reg = <0x43100000 90>;
-			interrupts = <45>;
-			#address-cells = <1>;
-			#size-cells = <1>;	
-			status = "disabled";
-		};
-
-		pxairq: interrupt-controller@40d00000 {
-			marvell,intc-priority;
-			marvell,intc-nr-irqs = <56>;
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "intel,pxa3xx-gpio";
-			reg = <0x40e00000 0x10000>;
-			interrupt-names = "gpio0", "gpio1", "gpio_mux";
-			interrupts = <8 9 10>;
-			gpio-controller;
-			#gpio-cells = <0x2>;
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-	};
-};
diff --git a/src/arm/pxa910-dkb.dts b/src/arm/pxa910-dkb.dts
deleted file mode 100644
index 595492aa5053..000000000000
--- a/src/arm/pxa910-dkb.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-/include/ "pxa910.dtsi"
-
-/ {
-	model = "Marvell PXA910 DKB Development Board";
-	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart1: uart@d4017000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-
-				pmic: 88pm860x@34 {
-					compatible = "marvell,88pm860x";
-					reg = <0x34>;
-					interrupts = <4>;
-					interrupt-parent = <&intc>;
-					interrupt-controller;
-					#interrupt-cells = <1>;
-
-					marvell,88pm860x-irq-read-clr;
-					marvell,88pm860x-slave-addr = <0x11>;
-
-					regulators {
-						BUCK1 {
-							regulator-min-microvolt = <1000000>;
-							regulator-max-microvolt = <1500000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						BUCK2 {
-							regulator-min-microvolt = <1000000>;
-							regulator-max-microvolt = <1500000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						BUCK3 {
-							regulator-min-microvolt = <1000000>;
-							regulator-max-microvolt = <3000000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO1 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <2800000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO2 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO3 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO4 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-						LDO5 {
-							regulator-min-microvolt = <2900000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO6 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO7 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <2900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO8 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <2900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO9 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO10 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO12 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-						LDO13 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-						LDO14 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-					};
-					rtc {
-						marvell,88pm860x-vrtc = <1>;
-					};
-					touch {
-						marvell,88pm860x-gpadc-prebias = <1>;
-						marvell,88pm860x-gpadc-slot-cycle = <1>;
-						marvell,88pm860x-tsi-prebias = <6>;
-						marvell,88pm860x-pen-prebias = <16>;
-						marvell,88pm860x-pen-prechg = <2>;
-						marvell,88pm860x-resistor-X = <300>;
-					};
-					backlights {
-						backlight-0 {
-							marvell,88pm860x-iset = <4>;
-							marvell,88pm860x-pwm = <3>;
-						};
-						backlight-2 {
-						};
-					};
-					leds {
-						led0-red {
-							marvell,88pm860x-iset = <12>;
-						};
-						led0-green {
-							marvell,88pm860x-iset = <12>;
-						};
-						led0-blue {
-							marvell,88pm860x-iset = <12>;
-						};
-					};
-				};
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa910.dtsi b/src/arm/pxa910.dtsi
deleted file mode 100644
index 0247c622f580..000000000000
--- a/src/arm/pxa910.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		L2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0x3>;
-		};
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			timer1: timer@d4016000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4016000 0x100>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4036000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4036000 0x1000>;
-				interrupts = <59>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4037000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4037000 0x1000>;
-				interrupts = <54>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8064-ifc6410.dts b/src/arm/qcom-apq8064-ifc6410.dts
deleted file mode 100644
index 7c2441d526bc..000000000000
--- a/src/arm/qcom-apq8064-ifc6410.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "qcom-apq8064-v2.0.dtsi"
-
-/ {
-	model = "Qualcomm APQ8064/IFC6410";
-	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
-
-	soc {
-		gsbi@16600000 {
-			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "ok";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8064-v2.0.dtsi b/src/arm/qcom-apq8064-v2.0.dtsi
deleted file mode 100644
index 935c3945fc5e..000000000000
--- a/src/arm/qcom-apq8064-v2.0.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-#include "qcom-apq8064.dtsi"
diff --git a/src/arm/qcom-apq8064.dtsi b/src/arm/qcom-apq8064.dtsi
deleted file mode 100644
index 92bf793622c3..000000000000
--- a/src/arm/qcom-apq8064.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-/dts-v1/;
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	model = "Qualcomm APQ8064";
-	compatible = "qcom,apq8064";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-		};
-
-		cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc2: clock-controller@20a8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc3: clock-controller@20b8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw2: regulator@20a9000 {
-			compatible = "qcom,saw2";
-			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw3: regulator@20b9000 {
-			compatible = "qcom,saw2";
-			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <0 158 0x0>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-apq8064";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8074-dragonboard.dts b/src/arm/qcom-apq8074-dragonboard.dts
deleted file mode 100644
index b4dfb01fe6fb..000000000000
--- a/src/arm/qcom-apq8074-dragonboard.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-#include "qcom-msm8974.dtsi"
-
-/ {
-	model = "Qualcomm APQ8074 Dragonboard";
-	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
-
-	soc {
-		serial@f991e000 {
-			status = "ok";
-		};
-
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "ok";
-		};
-
-		sdhci@f98a4900 {
-			cd-gpios = <&msmgpio 62 0x1>;
-			bus-width = <4>;
-		};
-
-
-		pinctrl@fd510000 {
-			spi8_default: spi8_default {
-				mosi {
-					pins = "gpio45";
-					function = "blsp_spi8";
-				};
-				miso {
-					pins = "gpio46";
-					function = "blsp_spi8";
-				};
-				cs {
-					pins = "gpio47";
-					function = "blsp_spi8";
-				};
-				clk {
-					pins = "gpio48";
-					function = "blsp_spi8";
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8084-mtp.dts b/src/arm/qcom-apq8084-mtp.dts
deleted file mode 100644
index 9dae3878b71d..000000000000
--- a/src/arm/qcom-apq8084-mtp.dts
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "qcom-apq8084.dtsi"
-
-/ {
-	model = "Qualcomm APQ 8084-MTP";
-	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
-};
diff --git a/src/arm/qcom-apq8084.dtsi b/src/arm/qcom-apq8084.dtsi
deleted file mode 100644
index e3e009a5912b..000000000000
--- a/src/arm/qcom-apq8084.dtsi
+++ /dev/null
@@ -1,179 +0,0 @@
-/dts-v1/;
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "Qualcomm APQ 8084";
-	compatible = "qcom,apq8084";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <0>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <1>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <2>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <3>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-		};
-
-		L2: l2-cache {
-			compatible = "qcom,arch-cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <0 9 0x4>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <0 10 0x4>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <0 11 0x4>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <0 12 0x4>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <0 13 0x4>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <0 14 0x4>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw_l2: regulator@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: clock-controller@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc1: clock-controller@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc2: clock-controller@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc3: clock-controller@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8660-surf.dts b/src/arm/qcom-msm8660-surf.dts
deleted file mode 100644
index 45180adfadf1..000000000000
--- a/src/arm/qcom-msm8660-surf.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm MSM8660 SURF";
-	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-
-	soc {
-		gsbi@19c00000 {
-			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@19c40000 {
-				status = "ok";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8660.dtsi b/src/arm/qcom-msm8660.dtsi
deleted file mode 100644
index 53837aaa2f72..000000000000
--- a/src/arm/qcom-msm8660.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	model = "Qualcomm MSM8660";
-	compatible = "qcom,msm8660";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2080000 {
-			compatible = "qcom,msm-8660-qgic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = < 0x02080000 0x1000 >,
-			      < 0x02081000 0x1000 >;
-		};
-
-		timer@2000000 {
-			compatible = "qcom,scss-timer", "qcom,msm-timer";
-			interrupts = <1 0 0x301>,
-				     <1 1 0x301>,
-				     <1 2 0x301>;
-			reg = <0x02000000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x40000>;
-		};
-
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
-			reg = <0x00800000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpio = <173>;
-			interrupts = <0 16 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8660";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		gsbi12: gsbi@19c00000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x19c00000 0x100>;
-			clocks = <&gcc GSBI12_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			serial@19c40000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x19c40000 0x1000>,
-				      <0x19c00000 0x1000>;
-				interrupts = <0 195 0x0>;
-				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8960-cdp.dts b/src/arm/qcom-msm8960-cdp.dts
deleted file mode 100644
index 8f75cc4c8340..000000000000
--- a/src/arm/qcom-msm8960-cdp.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "qcom-msm8960.dtsi"
-
-/ {
-	model = "Qualcomm MSM8960 CDP";
-	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
-
-	soc {
-		gsbi@16400000 {
-			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16440000 {
-				status = "ok";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8960.dtsi b/src/arm/qcom-msm8960.dtsi
deleted file mode 100644
index 5303e53e34dc..000000000000
--- a/src/arm/qcom-msm8960.dtsi
+++ /dev/null
@@ -1,155 +0,0 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	model = "Qualcomm MSM8960";
-	compatible = "qcom,msm8960";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <1 14 0x304>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-		qcom,no-pc-write;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpio = <150>;
-			interrupts = <0 16 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8960";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		clock-controller@4000000 {
-			compatible = "qcom,mmcc-msm8960";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8974.dtsi b/src/arm/qcom-msm8974.dtsi
deleted file mode 100644
index 69dca2aca25a..000000000000
--- a/src/arm/qcom-msm8974.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/dts-v1/;
-
-#include "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8974.h>
-
-/ {
-	model = "Qualcomm MSM8974";
-	compatible = "qcom,msm8974";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <1 9 0xf04>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-		};
-
-		cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-		};
-
-		cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <0 9 0x4>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <0 10 0x4>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <0 11 0x4>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <0 12 0x4>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <0 13 0x4>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <0 14 0x4>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw_l2: regulator@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: clock-controller@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc1: clock-controller@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc2: clock-controller@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc3: clock-controller@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0xfc400000 0x4000>;
-		};
-
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0xfd8c0000 0x6000>;
-		};
-
-		serial@f991e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991e000 0x1000>;
-			interrupts = <0 108 0x0>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		sdhci@f9824900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 123 0>, <0 138 0>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		sdhci@f98a4900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 125 0>, <0 221 0>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8974-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 208 0>;
-		};
-	};
-};
diff --git a/src/arm/r7s72100-genmai-reference.dts b/src/arm/r7s72100-genmai-reference.dts
deleted file mode 100644
index da19c70ed82b..000000000000
--- a/src/arm/r7s72100-genmai-reference.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Device Tree Source for the Genmai board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-/include/ "r7s72100.dtsi"
-
-/ {
-	model = "Genmai";
-	compatible = "renesas,genmai-reference", "renesas,r7s72100";
-
-	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x08000000 0x08000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/src/arm/r7s72100-genmai.dts b/src/arm/r7s72100-genmai.dts
deleted file mode 100644
index 20705467f4c9..000000000000
--- a/src/arm/r7s72100-genmai.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Device Tree Source for the Genmai board
- *
- * Copyright (C) 2013-14 Renesas Solutions Corp.
- * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r7s72100.dtsi"
-
-/ {
-	model = "Genmai";
-	compatible = "renesas,genmai", "renesas,r7s72100";
-
-	aliases {
-		serial2 = &scif2;
-	};
-
-	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x08000000 0x08000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <13330000>;
-};
-
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom@50 {
-		compatible = "renesas,24c128";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-&scif2 {
-	status = "okay";
-};
-
-&spi4 {
-	status = "okay";
-
-	codec: codec@0 {
-		compatible = "wlf,wm8978";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-};
diff --git a/src/arm/r7s72100.dtsi b/src/arm/r7s72100.dtsi
deleted file mode 100644
index bdee22541189..000000000000
--- a/src/arm/r7s72100.dtsi
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * Device Tree Source for the r7s72100 SoC
- *
- * Copyright (C) 2013-14 Renesas Solutions Corp.
- * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/r7s72100-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r7s72100";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-		spi3 = &spi3;
-		spi4 = &spi4;
-	};
-
-	clocks {
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* External clocks */
-		extal_clk: extal_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			/* If clk present, value must be set by board */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		usb_x1_clk: usb_x1_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			/* If clk present, value must be set by board */
-			clock-frequency = <0>;
-			clock-output-names = "usb_x1";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@fcfe0000 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-cpg-clocks",
-				     "renesas,rz-cpg-clocks";
-			reg = <0xfcfe0000 0x18>;
-			clocks = <&extal_clk>, <&usb_x1_clk>;
-			clock-output-names = "pll", "i", "g";
-		};
-
-		/* Fixed factor clocks */
-		b_clk: b_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-			clock-mult = <1>;
-			clock-div = <3>;
-			clock-output-names = "b";
-		};
-		p1_clk: p1_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-			clock-mult = <1>;
-			clock-div = <6>;
-			clock-output-names = "p1";
-		};
-		p0_clk: p0_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-			clock-mult = <1>;
-			clock-div = <12>;
-			clock-output-names = "p0";
-		};
-
-		/* MSTP clocks */
-		mstp3_clks: mstp3_clks@fcfe0420 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0420 4>;
-			clocks = <&p0_clk>;
-			clock-indices = <R7S72100_CLK_MTU2>;
-			clock-output-names = "mtu2";
-		};
-
-		mstp4_clks: mstp4_clks@fcfe0424 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0424 4>;
-			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
-				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
-			clock-indices = <
-				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
-				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
-			>;
-			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
-		};
-
-		mstp9_clks: mstp9_clks@fcfe0438 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0438 4>;
-			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
-			clock-indices = <
-				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
-			>;
-			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
-		};
-
-		mstp10_clks: mstp10_clks@fcfe043c {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe043c 4>;
-			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
-				 <&p1_clk>;
-			clock-indices = <
-				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
-				R7S72100_CLK_SPI4
-			>;
-			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-
-	gic: interrupt-controller@e8201000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0xe8201000 0x1000>,
-			<0xe8202000 0x1000>;
-	};
-
-	i2c0: i2c@fcfee000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee000 0x44>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 158 IRQ_TYPE_EDGE_RISING>,
-			     <0 159 IRQ_TYPE_EDGE_RISING>,
-			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@fcfee400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee400 0x44>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 166 IRQ_TYPE_EDGE_RISING>,
-			     <0 167 IRQ_TYPE_EDGE_RISING>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 169 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 170 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@fcfee800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee800 0x44>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 174 IRQ_TYPE_EDGE_RISING>,
-			     <0 175 IRQ_TYPE_EDGE_RISING>,
-			     <0 176 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 177 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 178 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 179 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@fcfeec00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfeec00 0x44>;
-		interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 182 IRQ_TYPE_EDGE_RISING>,
-			     <0 183 IRQ_TYPE_EDGE_RISING>,
-			     <0 184 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 185 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 186 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 187 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	scif0: serial@e8007000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8007000 64>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 191 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 192 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@e8007800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8007800 64>;
-		interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 195 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 196 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif2: serial@e8008000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8008000 64>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 200 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif3: serial@e8008800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8008800 64>;
-		interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 203 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 204 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif4: serial@e8009000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8009000 64>;
-		interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 207 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 208 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif5: serial@e8009800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8009800 64>;
-		interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 211 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 212 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif6: serial@e800a000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe800a000 64>;
-		interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 215 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 216 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif7: serial@e800a800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe800a800 64>;
-		interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 219 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 220 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	spi0: spi@e800c800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi1: spi@e800d000 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800d000 0x24>;
-		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi2: spi@e800d800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800d800 0x24>;
-		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi3: spi@e800e000 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800e000 0x24>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi4: spi@e800e800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800e800 0x24>;
-		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a73a4-ape6evm-reference.dts b/src/arm/r8a73a4-ape6evm-reference.dts
deleted file mode 100644
index a860f32bca27..000000000000
--- a/src/arm/r8a73a4-ape6evm-reference.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "APE6EVM";
-	compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
-
-	aliases {
-		serial0 = &scifa0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_mmc0: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "MMC0 Vcc";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/* Common 3.3V rail, used by several devices on APE6EVM */
-	ape6evm_fixed_3v3: regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	lbsc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x80000000>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	vdd_dvfs: max8973@1b {
-		compatible = "maxim,max8973";
-		reg = <0x1b>;
-
-		regulator-min-microvolt = <935000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-	operating-points = <
-		/* kHz  uV */
-		1950000 1115000
-		1462500  995000
-	>;
-	voltage-tolerance = <1>; /* 1% */
-};
-
-&pfc {
-	scifa0_pins: serial0 {
-		renesas,groups = "scifa0_data";
-		renesas,function = "scifa0";
-	};
-
-	mmc0_pins: mmc {
-		renesas,groups = "mmc0_data8", "mmc0_ctrl";
-		renesas,function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
-	};
-};
-
-&mmcif0 {
-	vmmc-supply = <&vcc_mmc0>;
-	bus-width = <8>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	status = "okay";
-};
-
-&scifa0 {
-	pinctrl-0 = <&scifa0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	vmmc-supply = <&vcc_sdhi0>;
-	bus-width = <4>;
-	toshiba,mmc-wrprotect-disable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi0_pins>;
-	status = "okay";
-};
-
-&sdhi1 {
-	vmmc-supply = <&ape6evm_fixed_3v3>;
-	bus-width = <4>;
-	broken-cd;
-	toshiba,mmc-wrprotect-disable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi1_pins>;
-	status = "okay";
-};
diff --git a/src/arm/r8a73a4-ape6evm.dts b/src/arm/r8a73a4-ape6evm.dts
deleted file mode 100644
index ce085fa444a1..000000000000
--- a/src/arm/r8a73a4-ape6evm.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "APE6EVM";
-	compatible = "renesas,ape6evm", "renesas,r8a73a4";
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	ape6evm_fixed_3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ethernet@8000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <0x08000000 0x1000>;
-			interrupt-parent = <&irqc1>;
-			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&ape6evm_fixed_3v3>;
-			vddvario-supply = <&ape6evm_fixed_3v3>;
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	vdd_dvfs: max8973@1b {
-		compatible = "maxim,max8973";
-		reg = <0x1b>;
-
-		regulator-min-microvolt = <935000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-	operating-points = <
-		/* kHz  uV */
-		1950000 1115000
-		1462500  995000
-	>;
-	voltage-tolerance = <1>; /* 1% */
-};
diff --git a/src/arm/r8a73a4.dtsi b/src/arm/r8a73a4.dtsi
deleted file mode 100644
index d8ec5058c351..000000000000
--- a/src/arm/r8a73a4.dtsi
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Device Tree Source for the r8a73a4 SoC
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a73a4";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-		};
-	};
-
-	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0xf1001000 0 0x1000>,
-			<0 0xf1002000 0 0x1000>,
-			<0 0xf1004000 0 0x2000>,
-			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 5 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 6 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 7 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 8 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 10 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 11 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqc1: interrupt-controller@e61c0200 {
-		compatible = "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0200 0 0x200>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 57 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	dmac: dma-multiplexer@0 {
-		compatible = "renesas,shdma-mux";
-		#dma-cells = <1>;
-		dma-channels = <20>;
-		dma-requests = <256>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dma0: dma-controller@e6700020 {
-			compatible = "renesas,shdma-r8a73a4";
-			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-					0 200 IRQ_TYPE_LEVEL_HIGH
-					0 201 IRQ_TYPE_LEVEL_HIGH
-					0 202 IRQ_TYPE_LEVEL_HIGH
-					0 203 IRQ_TYPE_LEVEL_HIGH
-					0 204 IRQ_TYPE_LEVEL_HIGH
-					0 205 IRQ_TYPE_LEVEL_HIGH
-					0 206 IRQ_TYPE_LEVEL_HIGH
-					0 207 IRQ_TYPE_LEVEL_HIGH
-					0 208 IRQ_TYPE_LEVEL_HIGH
-					0 209 IRQ_TYPE_LEVEL_HIGH
-					0 210 IRQ_TYPE_LEVEL_HIGH
-					0 211 IRQ_TYPE_LEVEL_HIGH
-					0 212 IRQ_TYPE_LEVEL_HIGH
-					0 213 IRQ_TYPE_LEVEL_HIGH
-					0 214 IRQ_TYPE_LEVEL_HIGH
-					0 215 IRQ_TYPE_LEVEL_HIGH
-					0 216 IRQ_TYPE_LEVEL_HIGH
-					0 217 IRQ_TYPE_LEVEL_HIGH
-					0 218 IRQ_TYPE_LEVEL_HIGH
-					0 219 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					"ch0", "ch1", "ch2", "ch3",
-					"ch4", "ch5", "ch6", "ch7",
-					"ch8", "ch9", "ch10", "ch11",
-					"ch12", "ch13", "ch14", "ch15",
-					"ch16", "ch17", "ch18", "ch19";
-		};
-	};
-
-	thermal@e61f0000 {
-		compatible = "renesas,rcar-thermal";
-		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
-			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	i2c0: i2c@e6500000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x428>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6510000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6510000 0 0x428>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6520000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6520000 0 0x428>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6530000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6530000 0 0x428>;
-		interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@e6540000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6540000 0 0x428>;
-		interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@e60b0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe60b0000 0 0x428>;
-		interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c6: i2c@e6550000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6550000 0 0x428>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c7: i2c@e6560000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6560000 0 0x428>;
-		interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c8: i2c@e6570000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6570000 0 0x428>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
-		reg = <0 0xe6c40000 0 0x100>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
-		reg = <0 0xe6c50000 0 0x100>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb2: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6c20000 0 0x100>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb3: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6c30000 0 0x100>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb4: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 0x100>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb5: serial@e6cf0000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6cf0000 0 0x100>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	mmcif0: mmc@ee200000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	mmcif1: mmc@ee220000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-r8a73a4";
-		reg = <0 0xe6050000 0 0x9000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
-			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
-			<&irqc0  8 0>, <&irqc0  9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
-			<&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
-			<&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
-			<&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
-			<&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
-			<&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
-			<&irqc1  0 0>, <&irqc1  1 0>, <&irqc1  2 0>, <&irqc1  3 0>,
-			<&irqc1  4 0>, <&irqc1  5 0>, <&irqc1  6 0>, <&irqc1  7 0>,
-			<&irqc1  8 0>, <&irqc1  9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
-			<&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
-			<&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
-			<&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
-			<&irqc1 24 0>, <&irqc1 25 0>;
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee100000 0 0x100>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ee120000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee120000 0 0x100>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee140000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a7740-armadillo800eva-reference.dts b/src/arm/r8a7740-armadillo800eva-reference.dts
deleted file mode 100644
index ee9e7d5c97a9..000000000000
--- a/src/arm/r8a7740-armadillo800eva-reference.dts
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "armadillo 800 eva reference";
-	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
-	aliases {
-		serial1 = &scifa1;
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reg_3p3v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sdhi0>;
-
-		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
-		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0
-			  1800000 1>;
-
-		enable-active-high;
-	};
-
-	reg_5p0v: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5.0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "SW3";
-			gpio-key,wakeup;
-		};
-
-		back-key {
-			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW4";
-		};
-
-		menu-key {
-			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "SW5";
-		};
-
-		home-key {
-			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW6";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led3 {
-			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
-			label = "LED3";
-		};
-		led4 {
-			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
-			label = "LED4";
-		};
-		led5 {
-			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
-			label = "LED5";
-		};
-		led6 {
-			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-	};
-
-	i2c2: i2c@2 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
-			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
-		default-brightness-level = <9>;
-		pinctrl-0 = <&backlight_pins>;
-		pinctrl-names = "default";
-		power-supply = <&reg_5p0v>;
-		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "i2s";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-			bitclock-inversion;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8978>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <12288000>;
-		};
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy0>;
-	status = "ok";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	touchscreen@55 {
-		compatible = "sitronix,st1232";
-		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&st1232_pins>;
-		pinctrl-names = "default";
-		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
-	};
-
-	wm8978: wm8978@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	rtc@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-	};
-};
-
-&pfc {
-	ether_pins: ether {
-		renesas,groups = "gether_mii", "gether_int";
-		renesas,function = "gether";
-	};
-
-	scifa1_pins: serial1 {
-		renesas,groups = "scifa1_data";
-		renesas,function = "scifa1";
-	};
-
-	st1232_pins: touchscreen {
-		renesas,groups = "intc_irq10";
-		renesas,function = "intc";
-	};
-
-	backlight_pins: backlight {
-		renesas,groups = "tpu0_to2_1";
-		renesas,function = "tpu0";
-	};
-
-	mmc0_pins: mmc0 {
-		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
-		renesas,function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
-				 "fsia_data_in_1", "fsia_data_out_0";
-		renesas,function = "fsia";
-	};
-};
-
-&tpu {
-	status = "okay";
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmc0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&scifa1 {
-	pinctrl-0 = <&scifa1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	bus-width = <4>;
-	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/src/arm/r8a7740-armadillo800eva.dts b/src/arm/r8a7740-armadillo800eva.dts
deleted file mode 100644
index a06a11e1a840..000000000000
--- a/src/arm/r8a7740-armadillo800eva.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-
-/ {
-	model = "armadillo 800 eva";
-	compatible = "renesas,armadillo800eva";
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-};
diff --git a/src/arm/r8a7740.dtsi b/src/arm/r8a7740.dtsi
deleted file mode 100644
index bda18fb3d9e5..000000000000
--- a/src/arm/r8a7740.dtsi
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Device Tree Source for the r8a7740 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7740";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x0>;
-			clock-frequency = <800000000>;
-		};
-	};
-
-	gic: interrupt-controller@c2800000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xc2800000 0x1000>,
-		      <0xc2000000 0x1000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin0: IRQ0 - IRQ7 */
-	irqpin0: irqpin@e6900000 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900000 4>,
-			<0xe6900010 4>,
-			<0xe6900020 1>,
-			<0xe6900040 1>,
-			<0xe6900060 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin1: IRQ8 - IRQ15 */
-	irqpin1: irqpin@e6900004 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900004 4>,
-			<0xe6900014 4>,
-			<0xe6900024 1>,
-			<0xe6900044 1>,
-			<0xe6900064 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin2: IRQ16 - IRQ23 */
-	irqpin2: irqpin@e6900008 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900008 4>,
-			<0xe6900018 4>,
-			<0xe6900028 1>,
-			<0xe6900048 1>,
-			<0xe6900068 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin3: IRQ24 - IRQ31 */
-	irqpin3: irqpin@e690000c {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe690000c 4>,
-			<0xe690001c 4>,
-			<0xe690002c 1>,
-			<0xe690004c 1>,
-			<0xe690006c 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ether: ethernet@e9a00000 {
-		compatible = "renesas,gether-r8a7740";
-		reg = <0xe9a00000 0x800>,
-		      <0xe9a01800 0x800>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
-		/* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
-		phy-mode = "mii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@fff20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
-		reg = <0xfff20000 0x425>;
-		interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6c20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
-		reg = <0xe6c20000 0x425>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
-			      0 71 IRQ_TYPE_LEVEL_HIGH
-			      0 72 IRQ_TYPE_LEVEL_HIGH
-			      0 73 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c40000 0x100>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c50000 0x100>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c60000 0x100>;
-		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c70000 0x100>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa4: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c80000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa5: serial@e6cb0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cb0000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa6: serial@e6cc0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cc0000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa7: serial@e6cd0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cd0000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb8: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
-		reg = <0xe6c30000 0x100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-r8a7740";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605800c 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-	tpu: pwm@e6600000 {
-		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
-		reg = <0xe6600000 0x100>;
-		status = "disabled";
-		#pwm-cells = <3>;
-	};
-
-	mmcif0: mmc@e6bd0000 {
-		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
-		reg = <0xe6bd0000 0x100>;
-		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
-			      0 57 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	sdhi0: sd@e6850000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6850000 0x100>;
-		interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
-			      0 118 IRQ_TYPE_LEVEL_HIGH
-			      0 119 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi1: sd@e6860000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6860000 0x100>;
-		interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
-			      0 122 IRQ_TYPE_LEVEL_HIGH
-			      0 123 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi2: sd@e6870000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6870000 0x100>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
-			      0 126 IRQ_TYPE_LEVEL_HIGH
-			      0 127 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sh_fsi2: sound@fe1f0000 {
-		#sound-dai-cells = <1>;
-		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
-		reg = <0xfe1f0000 0x400>;
-		interrupts = <0 9 0x4>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a7778-bockw-reference.dts b/src/arm/r8a7778-bockw-reference.dts
deleted file mode 100644
index 3342c74c5de8..000000000000
--- a/src/arm/r8a7778-bockw-reference.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet@18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-};
-
-&mmcif {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	broken-cd;
-	status = "okay";
-};
-
-&irqpin {
-	status = "okay";
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_a", "scif0_ctrl";
-		renesas,function = "scif0";
-	};
-
-	mmc_pins: mmc {
-		renesas,groups = "mmc_data8", "mmc_ctrl";
-		renesas,function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0_a";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl008k";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/src/arm/r8a7778-bockw.dts b/src/arm/r8a7778-bockw.dts
deleted file mode 100644
index 46a884d45175..000000000000
--- a/src/arm/r8a7778-bockw.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw", "renesas,r8a7778";
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-};
diff --git a/src/arm/r8a7778.dtsi b/src/arm/r8a7778.dtsi
deleted file mode 100644
index ecfdf4b01b5a..000000000000
--- a/src/arm/r8a7778.dtsi
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Device Tree Source for Renesas r8a7778
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7778";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-		};
-	};
-
-	aliases {
-		spi0 = &hspi0;
-		spi1 = &hspi1;
-		spi2 = &hspi2;
-	};
-
-	gic: interrupt-controller@fe438000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfe438000 0x1000>,
-		      <0xfe430000 0x100>;
-	};
-
-	/* irqpin: IRQ0 - IRQ3 */
-	irqpin: irqpin@fe78001c {
-		compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		status = "disabled"; /* default off */
-		reg =	<0xfe78001c 4>,
-			<0xfe780010 4>,
-			<0xfe780024 4>,
-			<0xfe780044 4>,
-			<0xfe780064 4>;
-		interrupts =   <0 27 IRQ_TYPE_LEVEL_HIGH
-				0 28 IRQ_TYPE_LEVEL_HIGH
-				0 29 IRQ_TYPE_LEVEL_HIGH
-				0 30 IRQ_TYPE_LEVEL_HIGH>;
-		sense-bitfield-width = <2>;
-	};
-
-	gpio0: gpio@ffc40000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc40000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio1: gpio@ffc41000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc41000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio2: gpio@ffc42000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc42000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio3: gpio@ffc43000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc43000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio4: gpio@ffc44000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc44000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 27>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	pfc: pfc@fffc0000 {
-		compatible = "renesas,pfc-r8a7778";
-		reg = <0xfffc0000 0x118>;
-	};
-
-	i2c0: i2c@ffc70000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc70000 0x1000>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@ffc71000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc71000 0x1000>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ffc72000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc72000 0x1000>;
-		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ffc73000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc73000 0x1000>;
-		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe40000 0x100>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe41000 0x100>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe42000 0x100>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe43000 0x100>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe44000 0x100>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe45000 0x100>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	mmcif: mmc@ffe4e000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0xffe4e000 0x100>;
-		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	sdhi0: sd@ffe4c000 {
-		compatible = "renesas,sdhi-r8a7778";
-		reg = <0xffe4c000 0x100>;
-		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ffe4d000 {
-		compatible = "renesas,sdhi-r8a7778";
-		reg = <0xffe4d000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ffe4f000 {
-		compatible = "renesas,sdhi-r8a7778";
-		reg = <0xffe4f000 0x100>;
-		interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc8000 0x18>;
-		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc6000 0x18>;
-		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a7779-marzen-reference.dts b/src/arm/r8a7779-marzen-reference.dts
deleted file mode 100644
index 76f5eef7d1cc..000000000000
--- a/src/arm/r8a7779-marzen-reference.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Reference Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "marzen";
-	compatible = "renesas,marzen-reference", "renesas,r8a7779";
-
-	chosen {
-		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	lan0@18000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18000000 0x100>;
-		pinctrl-0 = <&lan0_pins>;
-		pinctrl-names = "default";
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led2 {
-			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		};
-		led3 {
-			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		};
-		led4 {
-			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&irqpin0 {
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif2_pins &scif4_pins>;
-	pinctrl-names = "default";
-
-	lan0_pins: lan0 {
-		intc {
-			renesas,groups = "intc_irq1_b";
-			renesas,function = "intc";
-		};
-		lbsc {
-			renesas,groups = "lbsc_ex_cs0";
-			renesas,function = "lbsc";
-		};
-	};
-
-	scif2_pins: serial2 {
-		renesas,groups = "scif2_data_c";
-		renesas,function = "scif2";
-	};
-
-	scif4_pins: serial4 {
-		renesas,groups = "scif4_data";
-		renesas,function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/src/arm/r8a7779-marzen.dts b/src/arm/r8a7779-marzen.dts
deleted file mode 100644
index 5745555df943..000000000000
--- a/src/arm/r8a7779-marzen.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "marzen";
-	compatible = "renesas,marzen", "renesas,r8a7779";
-
-	aliases {
-		serial2 = &scif2;
-		serial4 = &scif4;
-	};
-
-	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	lan0@18000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18000000 0x100>;
-		pinctrl-0 = <&lan0_pins>;
-		pinctrl-names = "default";
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led2 {
-			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		};
-		led3 {
-			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		};
-		led4 {
-			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&irqpin0 {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <31250000>;
-};
-
-&pfc {
-	lan0_pins: lan0 {
-		intc {
-			renesas,groups = "intc_irq1_b";
-			renesas,function = "intc";
-		};
-		lbsc {
-			renesas,groups = "lbsc_ex_cs0";
-			renesas,function = "lbsc";
-		};
-	};
-
-	scif2_pins: serial2 {
-		renesas,groups = "scif2_data_c";
-		renesas,function = "scif2";
-	};
-
-	scif4_pins: serial4 {
-		renesas,groups = "scif4_data";
-		renesas,function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0";
-		renesas,function = "hspi0";
-	};
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif4 {
-	pinctrl-0 = <&scif4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/src/arm/r8a7779.dtsi b/src/arm/r8a7779.dtsi
deleted file mode 100644
index 58d0d952d60e..000000000000
--- a/src/arm/r8a7779.dtsi
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * Device Tree Source for Renesas r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/r8a7779-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7779";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			clock-frequency = <1000000000>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	aliases {
-		spi0 = &hspi0;
-		spi1 = &hspi1;
-		spi2 = &hspi2;
-	};
-
-	gic: interrupt-controller@f0001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xf0001000 0x1000>,
-		      <0xf0000100 0x100>;
-	};
-
-	gpio0: gpio@ffc40000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc40000 0x2c>;
-		interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio1: gpio@ffc41000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc41000 0x2c>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio2: gpio@ffc42000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc42000 0x2c>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio3: gpio@ffc43000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc43000 0x2c>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio4: gpio@ffc44000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc44000 0x2c>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio5: gpio@ffc45000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc45000 0x2c>;
-		interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 160 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio6: gpio@ffc46000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc46000 0x2c>;
-		interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 192 9>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	irqpin0: irqpin@fe780010 {
-		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		status = "disabled";
-		interrupt-controller;
-		reg = <0xfe78001c 4>,
-			<0xfe780010 4>,
-			<0xfe780024 4>,
-			<0xfe780044 4>,
-			<0xfe780064 4>;
-		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH>;
-		sense-bitfield-width = <2>;
-	};
-
-	i2c0: i2c@ffc70000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc70000 0x1000>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@ffc71000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc71000 0x1000>;
-		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ffc72000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc72000 0x1000>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ffc73000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc73000 0x1000>;
-		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
-		status = "disabled";
-	};
-
-	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe40000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe41000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe42000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe43000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe44000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe45000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	pfc: pfc@fffc0000 {
-		compatible = "renesas,pfc-r8a7779";
-		reg = <0xfffc0000 0x23c>;
-	};
-
-	thermal@ffc48000 {
-		compatible = "renesas,rcar-thermal";
-		reg = <0xffc48000 0x38>;
-	};
-
-	sata: sata@fc600000 {
-		compatible = "renesas,rcar-sata";
-		reg = <0xfc600000 0x2000>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
-	};
-
-	sdhi0: sd@ffe4c000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4c000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ffe4d000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4d000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ffe4e000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4e000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi3: sd@ffe4f000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4f000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		status = "disabled";
-	};
-
-	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc8000 0x18>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		status = "disabled";
-	};
-
-	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc6000 0x18>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* External root clock */
-		extal_clk: extal_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overriden by the board. */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: clocks@ffc80000 {
-			compatible = "renesas,r8a7779-cpg-clocks";
-			reg = <0xffc80000 0x30>;
-			clocks = <&extal_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "plla", "z", "zs", "s",
-					     "s1", "p", "b", "out";
-		};
-
-		/* Fixed factor clocks */
-		i_clk: i_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "i";
-		};
-		s3_clk: s3_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "s3";
-		};
-		s4_clk: s4_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <16>;
-			clock-mult = <1>;
-			clock-output-names = "s4";
-		};
-		g_clk: g_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <24>;
-			clock-mult = <1>;
-			clock-output-names = "g";
-		};
-
-		/* Gate clocks */
-		mstp0_clks: clocks@ffc80030 {
-			compatible = "renesas,r8a7779-mstp-clocks",
-			             "renesas,cpg-mstp-clocks";
-			reg = <0xffc80030 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_S>,
-			         <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7779_CLK_HSPI R8A7779_CLK_TMU2
-				R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
-				R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
-				R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
-				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
-				R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
-				R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
-				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
-			>;
-			clock-output-names =
-				"hspi", "tmu2", "tmu1", "tmu0", "hscif1",
-				"hscif0", "scif5", "scif4", "scif3", "scif2",
-				"scif1", "scif0", "i2c3", "i2c2", "i2c1",
-				"i2c0";
-		};
-		mstp1_clks: clocks@ffc80034 {
-			compatible = "renesas,r8a7779-mstp-clocks",
-			             "renesas,cpg-mstp-clocks";
-			reg = <0xffc80034 4>, <0xffc80044 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7779_CLK_USB01 R8A7779_CLK_USB2
-				R8A7779_CLK_DU R8A7779_CLK_VIN2
-				R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
-				R8A7779_CLK_ETHER R8A7779_CLK_SATA
-				R8A7779_CLK_PCIE R8A7779_CLK_VIN3
-			>;
-			clock-output-names =
-				"usb01", "usb2",
-				"du", "vin2",
-				"vin1", "vin0",
-				"ether", "sata",
-				"pcie", "vin3";
-		};
-		mstp3_clks: clocks@ffc8003c {
-			compatible = "renesas,r8a7779-mstp-clocks",
-			             "renesas,cpg-mstp-clocks";
-			reg = <0xffc8003c 4>;
-			clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
-				 <&s4_clk>, <&s4_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
-				R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
-				R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
-			>;
-			clock-output-names =
-				"sdhi3", "sdhi2", "sdhi1", "sdhi0",
-				"mmc1", "mmc0";
-		};
-	};
-};
diff --git a/src/arm/r8a7790-lager.dts b/src/arm/r8a7790-lager.dts
deleted file mode 100644
index 856b4236b674..000000000000
--- a/src/arm/r8a7790-lager.dts
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * Device Tree Source for the Lager board
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7790.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Lager";
-	compatible = "renesas,lager", "renesas,r8a7790";
-
-	aliases {
-		serial6 = &scif0;
-		serial7 = &scif1;
-	};
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@180000000 {
-		device_type = "memory";
-		reg = <1 0x40000000 0 0xc0000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button@1 {
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-		button@4 {
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator@4 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-
-	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
-		renesas,function = "du";
-	};
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data";
-		renesas,function = "scif0";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data";
-		renesas,function = "scif1";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	mmc1_pins: mmc1 {
-		renesas,groups = "mmc1_data8", "mmc1_ctrl";
-		renesas,function = "mmc1";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof1_pins: spi2 {
-		renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
-				 "msiof1_tx";
-		renesas,function = "msiof1";
-	};
-
-	iic1_pins: iic1 {
-		renesas,groups = "iic1";
-		renesas,function = "iic1";
-	};
-
-	iic2_pins: iic2 {
-		renesas,groups = "iic2";
-		renesas,function = "iic2";
-	};
-
-	iic3_pins: iic3 {
-		renesas,groups = "iic3";
-		renesas,function = "iic3";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-
-	usb2_pins: usb2 {
-		renesas,groups = "usb2";
-		renesas,function = "usb2";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "ok";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&mmcif1 {
-	pinctrl-0 = <&mmc1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&sata1 {
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash";
-			reg = <0x00440000 0x03bc0000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&msiof1 {
-	pinctrl-0 = <&msiof1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic: pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-&iic0	{
-	status = "ok";
-};
-
-&iic1	{
-	status = "ok";
-	pinctrl-0 = <&iic1_pins>;
-	pinctrl-names = "default";
-};
-
-&iic2	{
-	status = "ok";
-	pinctrl-0 = <&iic2_pins>;
-	pinctrl-names = "default";
-};
-
-&iic3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins>;
-	status = "okay";
-
-	vdd_dvfs: regulator@68 {
-		compatible = "diasemi,da9210";
-		reg = <0x68>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pci2 {
-	status = "okay";
-	pinctrl-0 = <&usb2_pins>;
-	pinctrl-names = "default";
-};
diff --git a/src/arm/r8a7790.dtsi b/src/arm/r8a7790.dtsi
deleted file mode 100644
index d9ddecbb859c..000000000000
--- a/src/arm/r8a7790.dtsi
+++ /dev/null
@@ -1,1080 +0,0 @@
-/*
- * Device Tree Source for the r8a7790 SoC
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/r8a7790-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7790";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &iic0;
-		i2c5 = &iic1;
-		i2c6 = &iic2;
-		i2c7 = &iic3;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		spi3 = &msiof2;
-		spi4 = &msiof3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1300000000>;
-			voltage-tolerance = <1>; /* 1% */
-			clocks = <&cpg_clocks R8A7790_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu4: cpu@4 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <780000000>;
-		};
-
-		cpu5: cpu@5 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <780000000>;
-		};
-
-		cpu6: cpu@6 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <780000000>;
-		};
-
-		cpu7: cpu@7 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <780000000>;
-		};
-	};
-
-	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0xf1001000 0 0x1000>,
-			<0 0xf1002000 0 0x1000>,
-			<0 0xf1004000 0 0x2000>,
-			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	gpio0: gpio@e6050000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
-	};
-
-	gpio1: gpio@e6051000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
-	};
-
-	gpio2: gpio@e6052000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
-	};
-
-	gpio3: gpio@e6053000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
-	};
-
-	gpio4: gpio@e6054000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
-	};
-
-	gpio5: gpio@e6055000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 160 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
-	};
-
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
-		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc-r8a7790", "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	i2c0: i2c@e6508000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6518000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6530000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6540000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
-		status = "disabled";
-	};
-
-	iic0: i2c@e6500000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
-		status = "disabled";
-	};
-
-	iic1: i2c@e6510000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
-		status = "disabled";
-	};
-
-	iic2: i2c@e6520000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe6520000 0 0x425>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
-		status = "disabled";
-	};
-
-	iic3: i2c@e60b0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
-		status = "disabled";
-	};
-
-	mmcif0: mmcif@ee200000 {
-		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
-		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	mmcif1: mmc@ee220000 {
-		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
-		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6060000 {
-		compatible = "renesas,pfc-r8a7790";
-		reg = <0 0xe6060000 0 0x250>;
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee100000 0 0x200>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ee120000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee120000 0 0x200>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee140000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi3: sd@ee160000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
-		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
-		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
-		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
-		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
-		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
-		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
-		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	ether: ethernet@ee700000 {
-		compatible = "renesas,ether-r8a7790";
-		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
-		phy-mode = "rmii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	sata0: sata@ee300000 {
-		compatible = "renesas,sata-r8a7790";
-		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
-		status = "disabled";
-	};
-
-	sata1: sata@ee500000 {
-		compatible = "renesas,sata-r8a7790";
-		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* External root clock */
-		extal_clk: extal_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overriden by the board. */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		/* External PCIe clock - can be overridden by the board */
-		pcie_bus_clk: pcie_bus_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-			clock-output-names = "pcie_bus";
-			status = "disabled";
-		};
-
-		/*
-		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
-		 * default. Boards that provide audio clocks should override them.
-		 */
-		audio_clk_a: audio_clk_a {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_a";
-		};
-		audio_clk_b: audio_clk_b {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_b";
-		};
-		audio_clk_c: audio_clk_c {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_c";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@e6150000 {
-			compatible = "renesas,r8a7790-cpg-clocks",
-				     "renesas,rcar-gen2-cpg-clocks";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "sd1",
-					     "z";
-		};
-
-		/* Variable factor clocks */
-		sd2_clk: sd2_clk@e6150078 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150078 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd2";
-		};
-		sd3_clk: sd3_clk@e615007c {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd3";
-		};
-		mmc0_clk: mmc0_clk@e6150240 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150240 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc0";
-		};
-		mmc1_clk: mmc1_clk@e6150244 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150244 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc1";
-		};
-		ssp_clk: ssp_clk@e6150248 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150248 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssp";
-		};
-		ssprs_clk: ssprs_clk@e615024c {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615024c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssprs";
-		};
-
-		/* Fixed factor clocks */
-		pll1_div2_clk: pll1_div2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
-		};
-		z2_clk: z2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "z2";
-		};
-		zg_clk: zg_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zg";
-		};
-		zx_clk: zx_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zx";
-		};
-		zs_clk: zs_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <6>;
-			clock-mult = <1>;
-			clock-output-names = "zs";
-		};
-		hp_clk: hp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "hp";
-		};
-		i_clk: i_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "i";
-		};
-		b_clk: b_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "b";
-		};
-		p_clk: p_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <24>;
-			clock-mult = <1>;
-			clock-output-names = "p";
-		};
-		cl_clk: cl_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <48>;
-			clock-mult = <1>;
-			clock-output-names = "cl";
-		};
-		m2_clk: m2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "m2";
-		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
-		rclk_clk: rclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(48 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "rclk";
-		};
-		oscclk_clk: oscclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(12 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "oscclk";
-		};
-		zb3_clk: zb3_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "zb3";
-		};
-		zb3d2_clk: zb3d2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "zb3d2";
-		};
-		ddr_clk: ddr_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "ddr";
-		};
-		mp_clk: mp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-div = <15>;
-			clock-mult = <1>;
-			clock-output-names = "mp";
-		};
-		cp_clk: cp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&extal_clk>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "cp";
-		};
-
-		/* Gate clocks */
-		mstp0_clks: mstp0_clks@e6150130 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
-			clocks = <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_MSIOF0>;
-			clock-output-names = "msiof0";
-		};
-		mstp1_clks: mstp1_clks@e6150134 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
-				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
-				 <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
-				R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
-				R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
-			>;
-			clock-output-names =
-				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
-				"vsp1-du0", "vsp1-rt", "vsp1-sy";
-		};
-		mstp2_clks: mstp2_clks@e6150138 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
-				 <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
-				R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
-				R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
-			>;
-			clock-output-names =
-				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
-				"scifb1", "msiof1", "msiof3", "scifb2";
-		};
-		mstp3_clks: mstp3_clks@e615013c {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
-				 <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
-				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
-				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
-				R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
-			>;
-			clock-output-names =
-				"iic2", "tpu0", "mmcif1", "sdhi3",
-				"sdhi2", "sdhi1", "sdhi0", "mmcif0",
-				"iic0", "pciec", "iic1", "ssusb", "cmt1";
-		};
-		mstp5_clks: mstp5_clks@e6150144 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal_clk>, <&p_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
-			clock-output-names = "thermal", "pwm";
-		};
-		mstp7_clks: mstp7_clks@e615014c {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
-				 <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
-				 <&zx_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
-				R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
-				R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
-				R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0
-			>;
-			clock-output-names =
-				"ehci", "hsusb", "hscif1", "hscif0", "scif1",
-				"scif0", "du2", "du1", "du0", "lvds1", "lvds0";
-		};
-		mstp8_clks: mstp8_clks@e6150990 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
-				 <&zs_clk>, <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
-				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
-				R8A7790_CLK_SATA0
-			>;
-			clock-output-names =
-				"vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
-		};
-		mstp9_clks: mstp9_clks@e6150994 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
-				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
-				R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
-				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
-				R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
-			>;
-			clock-output-names =
-				"gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
-				"rcan1", "rcan0", "qspi_mod", "iic3",
-				"i2c3", "i2c2", "i2c1", "i2c0";
-		};
-		mstp10_clks: mstp10_clks@e6150998 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
-			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
-
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7790_CLK_SSI_ALL
-				R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5
-				R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
-				R8A7790_CLK_SCU_ALL
-				R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
-				R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
-				R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
-			>;
-			clock-output-names =
-				"ssi-all",
-				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
-				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
-				"scu-all",
-				"scu-dvc1", "scu-dvc0",
-				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
-				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
-		};
-	};
-
-	qspi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7790", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof1: spi@e6e10000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof2: spi@e6e00000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof3: spi@e6c90000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6c90000 0 0x0064>;
-		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7790";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0 0xee090000 0 0xc00>,
-		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pci1: pci@ee0b0000 {
-		compatible = "renesas,pci-r8a7790";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0 0xee0b0000 0 0xc00>,
-		      <0 0xee0a0000 0 0x1100>;
-		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <1 1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pci2: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7790";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0 0xee0d0000 0 0xc00>,
-		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <2 2>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7790";
-		reg = <0 0xfe000000 0 0x80000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x00 0xff>;
-		device_type = "pci";
-		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-		/* Map all possible DDR as inbound ranges */
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-			      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
-		clock-names = "pcie", "pcie_bus";
-		status = "disabled";
-	};
-
-	rcar_sound: rcar_sound@0xec500000 {
-		#sound-dai-cells = <1>;
-		compatible =  "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
-		interrupt-parent = <&gic>;
-		reg =	<0 0xec500000 0 0x1000>, /* SCU */
-			<0 0xec5a0000 0 0x100>,  /* ADG */
-			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>; /* SSI */
-		clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
-			<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
-			<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
-			<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
-			<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
-			<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
-			<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
-			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
-		clock-names = "ssi-all",
-				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-				"src.9", "src.8", "src.7", "src.6", "src.5",
-				"src.4", "src.3", "src.2", "src.1", "src.0",
-				"dvc.0", "dvc.1",
-				"clk_a", "clk_b", "clk_c", "clk_i";
-
-		status = "disabled";
-
-		rcar_sound,dvc {
-			dvc0: dvc@0 { };
-			dvc1: dvc@1 { };
-		};
-
-		rcar_sound,src {
-			src0: src@0 { };
-			src1: src@1 { };
-			src2: src@2 { };
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
-		};
-
-		rcar_sound,ssi {
-			ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
-		};
-	};
-};
diff --git a/src/arm/r8a7791-henninger.dts b/src/arm/r8a7791-henninger.dts
deleted file mode 100644
index 3a2ef0a2a137..000000000000
--- a/src/arm/r8a7791-henninger.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Henninger";
-	compatible = "renesas,henninger", "renesas,r8a7791";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_sdhi0: regulator@0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator@1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi2: regulator@3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "ok";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader_prg";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user_prg";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash_fs";
-			reg = <0x00440000 0x03bc0000>;
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie_bus_clk {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
diff --git a/src/arm/r8a7791-koelsch-reference.dts b/src/arm/r8a7791-koelsch-reference.dts
deleted file mode 100644
index 588ca17ea1f0..000000000000
--- a/src/arm/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <30>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <48>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <46>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <32>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <33>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <34>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-};
diff --git a/src/arm/r8a7791-koelsch.dts b/src/arm/r8a7791-koelsch.dts
deleted file mode 100644
index be59014474b2..000000000000
--- a/src/arm/r8a7791-koelsch.dts
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch", "renesas,r8a7791";
-
-	aliases {
-		serial6 = &scif0;
-		serial7 = &scif1;
-	};
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-1 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_D>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_E>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_F>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_G>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	vcc_sdhi0: regulator@0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi1: regulator@2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator@3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@4 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator@5 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
-	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
-		renesas,function = "du";
-	};
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "ok";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-		partition@80000 {
-			label = "bootenv";
-			reg = <0x00080000 0x00080000>;
-			read-only;
-		};
-		partition@100000 {
-			label = "data";
-			reg = <0x00100000 0x03f00000>;
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic: pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom@50 {
-		compatible = "renesas,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	vdd_dvfs: regulator@68 {
-		compatible = "diasemi,da9210";
-		reg = <0x68>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie_bus_clk {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
diff --git a/src/arm/r8a7791.dtsi b/src/arm/r8a7791.dtsi
deleted file mode 100644
index 0d82a4b3c650..000000000000
--- a/src/arm/r8a7791.dtsi
+++ /dev/null
@@ -1,1091 +0,0 @@
-/*
- * Device Tree Source for the r8a7791 SoC
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/r8a7791-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7791";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		spi3 = &msiof2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-			voltage-tolerance = <1>; /* 1% */
-			clocks = <&cpg_clocks R8A7791_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1500000000>;
-		};
-	};
-
-	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0xf1001000 0 0x1000>,
-			<0 0xf1002000 0 0x1000>,
-			<0 0xf1004000 0 0x2000>,
-			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	gpio0: gpio@e6050000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
-	};
-
-	gpio1: gpio@e6051000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
-	};
-
-	gpio2: gpio@e6052000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
-	};
-
-	gpio3: gpio@e6053000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
-	};
-
-	gpio4: gpio@e6054000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
-	};
-
-	gpio5: gpio@e6055000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 160 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
-	};
-
-	gpio6: gpio@e6055400 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6055400 0 0x50>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 192 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
-	};
-
-	gpio7: gpio@e6055800 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6055800 0 0x50>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 224 26>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
-	};
-
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
-		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc-r8a7791", "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* The memory map in the User's Manual maps the cores to bus numbers */
-	i2c0: i2c@e6508000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6518000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6530000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6540000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@e6520000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6520000 0 0x40>;
-		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@e6528000 {
-		/* doesn't need pinmux */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6528000 0 0x40>;
-		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
-		status = "disabled";
-	};
-
-	i2c6: i2c@e60b0000 {
-		/* doesn't need pinmux */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
-		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
-		status = "disabled";
-	};
-
-	i2c7: i2c@e6500000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
-		status = "disabled";
-	};
-
-	i2c8: i2c@e6510000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
-		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6060000 {
-		compatible = "renesas,pfc-r8a7791";
-		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-r8a7791";
-		reg = <0 0xee100000 0 0x200>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ee140000 {
-		compatible = "renesas,sdhi-r8a7791";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee160000 {
-		compatible = "renesas,sdhi-r8a7791";
-		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c70000 0 64>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa4: serial@e6c78000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c78000 0 64>;
-		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa5: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c80000 0 64>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif2: serial@e6e58000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6e58000 0 64>;
-		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif3: serial@e6ea8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6ea8000 0 64>;
-		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif4: serial@e6ee0000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6ee0000 0 64>;
-		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif5: serial@e6ee8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6ee8000 0 64>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
-		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
-		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif2: serial@e62d0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
-		reg = <0 0xe62d0000 0 96>;
-		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	ether: ethernet@ee700000 {
-		compatible = "renesas,ether-r8a7791";
-		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
-		phy-mode = "rmii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	sata0: sata@ee300000 {
-		compatible = "renesas,sata-r8a7791";
-		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
-		status = "disabled";
-	};
-
-	sata1: sata@ee500000 {
-		compatible = "renesas,sata-r8a7791";
-		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* External root clock */
-		extal_clk: extal_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overriden by the board. */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		/*
-		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
-		 * default. Boards that provide audio clocks should override them.
-		 */
-		audio_clk_a: audio_clk_a {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_a";
-		};
-		audio_clk_b: audio_clk_b {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_b";
-		};
-		audio_clk_c: audio_clk_c {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_c";
-		};
-
-		/* External PCIe clock - can be overridden by the board */
-		pcie_bus_clk: pcie_bus_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-			clock-output-names = "pcie_bus";
-			status = "disabled";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@e6150000 {
-			compatible = "renesas,r8a7791-cpg-clocks",
-				     "renesas,rcar-gen2-cpg-clocks";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
-		};
-
-		/* Variable factor clocks */
-		sd1_clk: sd2_clk@e6150078 {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150078 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd1";
-		};
-		sd2_clk: sd3_clk@e615026c {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615026c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd2";
-		};
-		mmc0_clk: mmc0_clk@e6150240 {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150240 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc0";
-		};
-		ssp_clk: ssp_clk@e6150248 {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150248 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssp";
-		};
-		ssprs_clk: ssprs_clk@e615024c {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615024c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssprs";
-		};
-
-		/* Fixed factor clocks */
-		pll1_div2_clk: pll1_div2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
-		};
-		zg_clk: zg_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zg";
-		};
-		zx_clk: zx_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zx";
-		};
-		zs_clk: zs_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <6>;
-			clock-mult = <1>;
-			clock-output-names = "zs";
-		};
-		hp_clk: hp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "hp";
-		};
-		i_clk: i_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "i";
-		};
-		b_clk: b_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "b";
-		};
-		p_clk: p_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <24>;
-			clock-mult = <1>;
-			clock-output-names = "p";
-		};
-		cl_clk: cl_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <48>;
-			clock-mult = <1>;
-			clock-output-names = "cl";
-		};
-		m2_clk: m2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "m2";
-		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
-		rclk_clk: rclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(48 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "rclk";
-		};
-		oscclk_clk: oscclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(12 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "oscclk";
-		};
-		zb3_clk: zb3_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "zb3";
-		};
-		zb3d2_clk: zb3d2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "zb3d2";
-		};
-		ddr_clk: ddr_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "ddr";
-		};
-		mp_clk: mp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-div = <15>;
-			clock-mult = <1>;
-			clock-output-names = "mp";
-		};
-		cp_clk: cp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&extal_clk>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "cp";
-		};
-
-		/* Gate clocks */
-		mstp0_clks: mstp0_clks@e6150130 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
-			clocks = <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_MSIOF0>;
-			clock-output-names = "msiof0";
-		};
-		mstp1_clks: mstp1_clks@e6150134 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
-				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
-				R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
-				R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
-			>;
-			clock-output-names =
-				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
-				"vsp1-du0", "vsp1-sy";
-		};
-		mstp2_clks: mstp2_clks@e6150138 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
-				 <&mp_clk>, <&mp_clk>, <&mp_clk>,
-				 <&zs_clk>, <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
-				R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
-				R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
-				R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0
-			>;
-			clock-output-names =
-				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
-				"scifb1", "msiof1", "scifb2",
-				"sys-dmac1", "sys-dmac0";
-		};
-		mstp3_clks: mstp3_clks@e615013c {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
-				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
-				R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
-				R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
-			>;
-			clock-output-names =
-				"tpu0", "sdhi2", "sdhi1", "sdhi0",
-				"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1";
-		};
-		mstp5_clks: mstp5_clks@e6150144 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal_clk>, <&p_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
-			clock-output-names = "thermal", "pwm";
-		};
-		mstp7_clks: mstp7_clks@e615014c {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>,  <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
-				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				 <&zx_clk>, <&zx_clk>, <&zx_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
-				R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
-				R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
-				R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
-				R8A7791_CLK_LVDS0
-			>;
-			clock-output-names =
-				"ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
-				"scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
-		};
-		mstp8_clks: mstp8_clks@e6150990 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
-				 <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
-				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
-			>;
-			clock-output-names =
-				"vin2", "vin1", "vin0", "ether", "sata1", "sata0";
-		};
-		mstp9_clks: mstp9_clks@e6150994 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
-				 <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
-				 <&hp_clk>, <&hp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
-				R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
-				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
-				R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
-				R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
-			>;
-			clock-output-names =
-				"gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
-				"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
-				"i2c1", "i2c0";
-		};
-		mstp10_clks: mstp10_clks@e6150998 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
-			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
-
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7791_CLK_SSI_ALL
-				R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5
-				R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
-				R8A7791_CLK_SCU_ALL
-				R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
-				R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
-				R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
-			>;
-			clock-output-names =
-				"ssi-all",
-				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
-				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
-				"scu-all",
-				"scu-dvc1", "scu-dvc0",
-				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
-				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
-		};
-		mstp11_clks: mstp11_clks@e615099c {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
-			>;
-			clock-output-names = "scifa3", "scifa4", "scifa5";
-		};
-	};
-
-	qspi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof1: spi@e6e10000 {
-		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof2: spi@e6e00000 {
-		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7791";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
-		reg = <0 0xee090000 0 0xc00>,
-		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pci1: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7791";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
-		reg = <0 0xee0d0000 0 0xc00>,
-		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <1 1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7791";
-		reg = <0 0xfe000000 0 0x80000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x00 0xff>;
-		device_type = "pci";
-		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-		/* Map all possible DDR as inbound ranges */
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-			      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
-		clock-names = "pcie", "pcie_bus";
-		status = "disabled";
-	};
-
-	rcar_sound: rcar_sound@0xec500000 {
-		#sound-dai-cells = <1>;
-		compatible =  "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
-		interrupt-parent = <&gic>;
-		reg =	<0 0xec500000 0 0x1000>, /* SCU */
-			<0 0xec5a0000 0 0x100>,  /* ADG */
-			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>; /* SSI */
-		clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>,
-			<&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>,
-			<&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>,
-			<&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>,
-			<&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>,
-			<&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
-			<&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
-			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
-		clock-names = "ssi-all",
-				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-				"src.9", "src.8", "src.7", "src.6", "src.5",
-				"src.4", "src.3", "src.2", "src.1", "src.0",
-				"dvc.0", "dvc.1",
-				"clk_a", "clk_b", "clk_c", "clk_i";
-
-		status = "disabled";
-
-		rcar_sound,dvc {
-			dvc0: dvc@0 { };
-			dvc1: dvc@1 { };
-		};
-
-		rcar_sound,src {
-			src0: src@0 { };
-			src1: src@1 { };
-			src2: src@2 { };
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
-		};
-
-		rcar_sound,ssi {
-			ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
-		};
-	};
-};
diff --git a/src/arm/rk3066a-bqcurie2.dts b/src/arm/rk3066a-bqcurie2.dts
deleted file mode 100644
index c9d912da6141..000000000000
--- a/src/arm/rk3066a-bqcurie2.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3066a.dtsi"
-
-/ {
-	model = "bq Curie 2";
-	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
-
-	memory {
-		reg = <0x60000000 0x40000000>;
-	};
-
-	vcc_sd0: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "sdmmc-supply";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		button@0 {
-			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
-			linux,code = <116>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
-			debounce-interval = <100>;
-		};
-		button@1 {
-			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
-			linux,code = <104>;
-			label = "GPIO Key Vol-";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <0>;
-			debounce-interval = <100>;
-		};
-		/* VOL+ comes somehow thru the ADC */
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-
-		vcc5-supply = <&vcc_io>;
-		vcc6-supply = <&vcc_io>;
-
-		regulators {
-			vcc_rtc: regulator@0 {
-				regulator-name = "vcc_rtc";
-				regulator-always-on;
-			};
-
-			vcc_io: regulator@1 {
-				regulator-name = "vcc_io";
-				regulator-always-on;
-			};
-
-			vdd_arm: regulator@2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vcc_ddr: regulator@3 {
-				regulator-name = "vcc_ddr";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vcc18_cif: regulator@5 {
-				regulator-name = "vcc18_cif";
-				regulator-always-on;
-			};
-
-			vdd_11: regulator@6 {
-				regulator-name = "vdd_11";
-				regulator-always-on;
-			};
-
-			vcc_25: regulator@7 {
-				regulator-name = "vcc_25";
-				regulator-always-on;
-			};
-
-			vcc_18: regulator@8 {
-				regulator-name = "vcc_18";
-				regulator-always-on;
-			};
-
-			vcc25_hdmi: regulator@9 {
-				regulator-name = "vcc25_hdmi";
-				regulator-always-on;
-			};
-
-			vcca_33: regulator@10 {
-				regulator-name = "vcca_33";
-				regulator-always-on;
-			};
-
-			vcc_tp: regulator@11 {
-				regulator-name = "vcc_tp";
-				regulator-always-on;
-			};
-
-			vcc28_cif: regulator@12 {
-				regulator-name = "vcc28_cif";
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-/* must be included after &tps gets defined */
-#include "tps65910.dtsi"
-
-&mmc0 { /* sdmmc */
-	num-slots = <1>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	vmmc-supply = <&vcc_sd0>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&mmc1 { /* wifi */
-	num-slots = <1>;
-	status = "okay";
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/src/arm/rk3066a-clocks.dtsi b/src/arm/rk3066a-clocks.dtsi
deleted file mode 100644
index 6e307fc4c451..000000000000
--- a/src/arm/rk3066a-clocks.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-		};
-
-		xin24m: xin24m {
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy48m: dummy48m {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy150m: dummy150m {
-			compatible = "fixed-clock";
-			clock-frequency = <150000000>;
-			#clock-cells = <0>;
-		};
-
-		clk_gates0: gate-clk@200000d0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d0 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_core_periph", "gate_cpu_gpll",
-				"gate_ddrphy", "gate_aclk_cpu",
-				"gate_hclk_cpu", "gate_pclk_cpu",
-				"gate_atclk_cpu", "gate_i2s0",
-				"gate_i2s0_frac", "gate_i2s1",
-				"gate_i2s1_frac", "gate_i2s2",
-				"gate_i2s2_frac", "gate_spdif",
-				"gate_spdif_frac", "gate_testclk";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates1: gate-clk@200000d4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d4 0x4>;
-			clocks = <&xin24m>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&dummy>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>;
-
-			clock-output-names =
-				"gate_timer0", "gate_timer1",
-				"gate_timer2", "gate_jtag",
-				"gate_aclk_lcdc1_src", "gate_otgphy0",
-				"gate_otgphy1", "gate_ddr_gpll",
-				"gate_uart0", "gate_frac_uart0",
-				"gate_uart1", "gate_frac_uart1",
-				"gate_uart2", "gate_frac_uart2",
-				"gate_uart3", "gate_frac_uart3";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates2: gate-clk@200000d8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d8 0x4>;
-			clocks = <&clk_gates2 1>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&clk_gates2 3>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_periph_src", "gate_aclk_periph",
-				"gate_hclk_periph", "gate_pclk_periph",
-				"gate_smc", "gate_mac",
-				"gate_hsadc", "gate_hsadc_frac",
-				"gate_saradc", "gate_spi0",
-				"gate_spi1", "gate_mmc0",
-				"gate_mac_lbtest", "gate_mmc1",
-				"gate_emmc", "gate_tsadc";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates3: gate-clk@200000dc {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000dc 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
-				"gate_dclk_lcdc1", "gate_pclkin_cif0",
-				"gate_pclkin_cif1", "reserved",
-				"reserved", "gate_cif0_out",
-				"gate_cif1_out", "gate_aclk_vepu",
-				"gate_hclk_vepu", "gate_aclk_vdpu",
-				"gate_hclk_vdpu", "gate_gpu_src",
-				"reserved", "gate_xin27m";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates4: gate-clk@200000e0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e0 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
-				 <&clk_gates2 1>, <&clk_gates2 1>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates0 4>, <&clk_gates0 4>,
-				 <&clk_gates0 3>, <&clk_gates0 3>,
-				 <&clk_gates0 3>, <&clk_gates2 3>,
-				 <&clk_gates0 4>;
-
-			clock-output-names =
-				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
-				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
-				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
-				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
-				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
-				"gate_aclk_strc_sys", "gate_aclk_l2mem_con",
-				"gate_aclk_intmem", "gate_pclk_tsadc",
-				"gate_hclk_hdmi";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates5: gate-clk@200000e4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e4 0x4>;
-			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 4>, <&clk_gates0 5>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates4 5>,
-				 <&clk_gates4 5>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_dmac1", "gate_aclk_dmac2",
-				"gate_pclk_efuse", "gate_pclk_tzpc",
-				"gate_pclk_grf", "gate_pclk_pmu",
-				"gate_hclk_rom", "gate_pclk_ddrupctl",
-				"gate_aclk_smc", "gate_hclk_nandc",
-				"gate_hclk_mmc0", "gate_hclk_mmc1",
-				"gate_hclk_emmc", "gate_hclk_otg0",
-				"gate_hclk_otg1", "gate_aclk_gpu";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates6: gate-clk@200000e8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e8 0x4>;
-			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
-				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
-				"gate_hclk_cif0", "gate_aclk_cif0",
-				"gate_hclk_cif1", "gate_aclk_cif1",
-				"gate_aclk_ipp", "gate_hclk_ipp",
-				"gate_hclk_rga", "gate_aclk_rga",
-				"gate_hclk_vio_bus", "gate_aclk_vio0",
-				"gate_aclk_vcodec", "gate_shclk_vio_h2h";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates7: gate-clk@200000ec {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000ec 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>;
-
-			clock-output-names =
-				"gate_hclk_emac", "gate_hclk_spdif",
-				"gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
-				"gate_hclk_i2s_8ch", "gate_hclk_hsadc",
-				"gate_hclk_pidf", "gate_pclk_timer0",
-				"gate_pclk_timer1", "gate_pclk_timer2",
-				"gate_pclk_pwm01", "gate_pclk_pwm23",
-				"gate_pclk_spi0", "gate_pclk_spi1",
-				"gate_pclk_saradc", "gate_pclk_wdt";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates8: gate-clk@200000f0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f0 0x4>;
-			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&dummy>, <&clk_gates0 5>;
-
-			clock-output-names =
-				"gate_pclk_uart0", "gate_pclk_uart1",
-				"gate_pclk_uart2", "gate_pclk_uart3",
-				"gate_pclk_i2c0", "gate_pclk_i2c1",
-				"gate_pclk_i2c2", "gate_pclk_i2c3",
-				"gate_pclk_i2c4", "gate_pclk_gpio0",
-				"gate_pclk_gpio1", "gate_pclk_gpio2",
-				"gate_pclk_gpio3", "gate_pclk_gpio4",
-				"reserved", "gate_pclk_gpio6";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates9: gate-clk@200000f4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f4 0x4>;
-			clocks = <&dummy>, <&clk_gates0 5>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&clk_gates1 4>,
-				 <&clk_gates0 5>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>;
-
-			clock-output-names =
-				"gate_clk_core_dbg", "gate_pclk_dbg",
-				"gate_clk_trace", "gate_atclk",
-				"gate_clk_l2c", "gate_aclk_vio1",
-				"gate_pclk_publ", "gate_aclk_intmem0",
-				"gate_aclk_intmem1", "gate_aclk_intmem2",
-				"gate_aclk_intmem3";
-
-			#clock-cells = <1>;
-		};
-	};
-
-};
diff --git a/src/arm/rk3066a.dtsi b/src/arm/rk3066a.dtsi
deleted file mode 100644
index 879a818fba51..000000000000
--- a/src/arm/rk3066a.dtsi
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/clock/rk3066a-cru.h>
-#include "rk3xxx.dtsi"
-
-/ {
-	compatible = "rockchip,rk3066a";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "rockchip,rk3066-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-	};
-
-	sram: sram@10080000 {
-		compatible = "mmio-sram";
-		reg = <0x10080000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x10080000 0x10000>;
-
-		smp-sram@0 {
-			compatible = "rockchip,rk3066-smp-sram";
-			reg = <0x0 0x50>;
-		};
-	};
-
-	cru: clock-controller@20000000 {
-		compatible = "rockchip,rk3066a-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	timer@2000e000 {
-		compatible = "snps,dw-apb-timer-osc";
-		reg = <0x2000e000 0x100>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
-		clock-names = "timer", "pclk";
-	};
-
-	timer@20038000 {
-		compatible = "snps,dw-apb-timer-osc";
-		reg = <0x20038000 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
-	};
-
-	timer@2003a000 {
-		compatible = "snps,dw-apb-timer-osc";
-		reg = <0x2003a000 0x100>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
-		clock-names = "timer", "pclk";
-	};
-
-	pinctrl: pinctrl {
-		compatible = "rockchip,rk3066a-pinctrl";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@20034000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20034000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO0>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@2003c000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio2@2003e000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003e000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO2>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio3@20080000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20080000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO3>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio4@20084000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20084000 0x100>;
-			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO4>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio6@2000a000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2000a000 0x100>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO6>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcfg_pull_default: pcfg_pull_default {
-			bias-pull-pin-default;
-		};
-
-		pcfg_pull_none: pcfg_pull_none {
-			bias-disable;
-		};
-
-		i2c0 {
-			i2c0_xfer: i2c0-xfer {
-				rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c1 {
-			i2c1_xfer: i2c1-xfer {
-				rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c2 {
-			i2c2_xfer: i2c2-xfer {
-				rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c3 {
-			i2c3_xfer: i2c3-xfer {
-				rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
-						<RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c4 {
-			i2c4_xfer: i2c4-xfer {
-				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm0 {
-			pwm0_out: pwm0-out {
-				rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm1 {
-			pwm1_out: pwm1-out {
-				rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm2 {
-			pwm2_out: pwm2-out {
-				rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm3 {
-			pwm3_out: pwm3-out {
-				rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart0 {
-			uart0_xfer: uart0-xfer {
-				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart0_cts: uart0-cts {
-				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart0_rts: uart0-rts {
-				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		uart1 {
-			uart1_xfer: uart1-xfer {
-				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart1_cts: uart1-cts {
-				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart1_rts: uart1-rts {
-				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		uart2 {
-			uart2_xfer: uart2-xfer {
-				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
-			};
-			/* no rts / cts for uart2 */
-		};
-
-		uart3 {
-			uart3_xfer: uart3-xfer {
-				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart3_cts: uart3-cts {
-				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart3_rts: uart3-rts {
-				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		sd0 {
-			sd0_clk: sd0-clk {
-				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_cmd: sd0-cmd {
-				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_cd: sd0-cd {
-				rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_wp: sd0-wp {
-				rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_bus1: sd0-bus-width1 {
-				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_bus4: sd0-bus-width4 {
-				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		sd1 {
-			sd1_clk: sd1-clk {
-				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_cmd: sd1-cmd {
-				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_cd: sd1-cd {
-				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_wp: sd1-wp {
-				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_bus1: sd1-bus-width1 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_bus4: sd1-bus-width4 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_xfer>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_xfer>;
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_xfer>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_xfer>;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_xfer>;
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_out>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm1_out>;
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm2_out>;
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_out>;
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_xfer>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_xfer>;
-};
-
-&wdt {
-	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
-};
diff --git a/src/arm/rk3188-clocks.dtsi b/src/arm/rk3188-clocks.dtsi
deleted file mode 100644
index b1b92dc245ce..000000000000
--- a/src/arm/rk3188-clocks.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-		};
-
-		xin24m: xin24m {
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy48m: dummy48m {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy150m: dummy150m {
-			compatible = "fixed-clock";
-			clock-frequency = <150000000>;
-			#clock-cells = <0>;
-		};
-
-		clk_gates0: gate-clk@200000d0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d0 0x4>;
-			clocks = <&dummy150m>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_core_periph", "gate_cpu_gpll",
-				"gate_ddrphy", "gate_aclk_cpu",
-				"gate_hclk_cpu", "gate_pclk_cpu",
-				"gate_atclk_cpu", "gate_aclk_core",
-				"reserved", "gate_i2s0",
-				"gate_i2s0_frac", "reserved",
-				"reserved", "gate_spdif",
-				"gate_spdif_frac", "gate_testclk";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates1: gate-clk@200000d4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d4 0x4>;
-			clocks = <&xin24m>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&dummy>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>;
-
-			clock-output-names =
-				"gate_timer0", "gate_timer1",
-				"gate_timer3", "gate_jtag",
-				"gate_aclk_lcdc1_src", "gate_otgphy0",
-				"gate_otgphy1", "gate_ddr_gpll",
-				"gate_uart0", "gate_frac_uart0",
-				"gate_uart1", "gate_frac_uart1",
-				"gate_uart2", "gate_frac_uart2",
-				"gate_uart3", "gate_frac_uart3";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates2: gate-clk@200000d8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d8 0x4>;
-			clocks = <&clk_gates2 1>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&clk_gates2 3>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_periph_src", "gate_aclk_periph",
-				"gate_hclk_periph", "gate_pclk_periph",
-				"gate_smc", "gate_mac",
-				"gate_hsadc", "gate_hsadc_frac",
-				"gate_saradc", "gate_spi0",
-				"gate_spi1", "gate_mmc0",
-				"gate_mac_lbtest", "gate_mmc1",
-				"gate_emmc", "reserved";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates3: gate-clk@200000dc {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000dc 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&xin24m>, <&xin24m>,
-				 <&dummy>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&xin24m>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
-				"gate_dclk_lcdc1", "gate_pclkin_cif0",
-				"gate_timer2", "gate_timer4",
-				"gate_hsicphy", "gate_cif0_out",
-				"gate_timer5", "gate_aclk_vepu",
-				"gate_hclk_vepu", "gate_aclk_vdpu",
-				"gate_hclk_vdpu", "reserved",
-				"gate_timer6", "gate_aclk_gpu_src";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates4: gate-clk@200000e0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e0 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
-				 <&clk_gates2 1>, <&clk_gates2 1>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates0 4>, <&clk_gates0 4>,
-				 <&clk_gates0 3>, <&dummy>,
-				 <&clk_gates0 3>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
-				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
-				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
-				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
-				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
-				"gate_aclk_strc_sys", "reserved",
-				"gate_aclk_intmem", "reserved",
-				"gate_hclk_imem1", "gate_hclk_imem0";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates5: gate-clk@200000e4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e4 0x4>;
-			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 4>, <&clk_gates0 5>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates4 5>;
-
-			clock-output-names =
-				"gate_aclk_dmac1", "gate_aclk_dmac2",
-				"gate_pclk_efuse", "gate_pclk_tzpc",
-				"gate_pclk_grf", "gate_pclk_pmu",
-				"gate_hclk_rom", "gate_pclk_ddrupctl",
-				"gate_aclk_smc", "gate_hclk_nandc",
-				"gate_hclk_mmc0", "gate_hclk_mmc1",
-				"gate_hclk_emmc", "gate_hclk_otg0";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates6: gate-clk@200000e8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e8 0x4>;
-			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>,
-				 <&dummy>, <&dummy>,
-				 <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
-				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
-				"gate_hclk_cif0", "gate_aclk_cif0",
-				"reserved", "reserved",
-				"gate_aclk_ipp", "gate_hclk_ipp",
-				"gate_hclk_rga", "gate_aclk_rga",
-				"gate_hclk_vio_bus", "gate_aclk_vio0";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates7: gate-clk@200000ec {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000ec 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&dummy>,
-				 <&dummy>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates0 5>,
-				 <&dummy>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>;
-
-			clock-output-names =
-				"gate_hclk_emac", "gate_hclk_spdif",
-				"gate_hclk_i2s0_2ch", "gate_hclk_otg1",
-				"gate_hclk_hsic", "gate_hclk_hsadc",
-				"gate_hclk_pidf", "gate_pclk_timer0",
-				"reserved", "gate_pclk_timer2",
-				"gate_pclk_pwm01", "gate_pclk_pwm23",
-				"gate_pclk_spi0", "gate_pclk_spi1",
-				"gate_pclk_saradc", "gate_pclk_wdt";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates8: gate-clk@200000f0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f0 0x4>;
-			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&dummy>;
-
-			clock-output-names =
-				"gate_pclk_uart0", "gate_pclk_uart1",
-				"gate_pclk_uart2", "gate_pclk_uart3",
-				"gate_pclk_i2c0", "gate_pclk_i2c1",
-				"gate_pclk_i2c2", "gate_pclk_i2c3",
-				"gate_pclk_i2c4", "gate_pclk_gpio0",
-				"gate_pclk_gpio1", "gate_pclk_gpio2",
-				"gate_pclk_gpio3", "gate_aclk_gps";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates9: gate-clk@200000f4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f4 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_clk_core_dbg", "gate_pclk_dbg",
-				"gate_clk_trace", "gate_atclk",
-				"gate_clk_l2c", "gate_aclk_vio1",
-				"gate_pclk_publ", "gate_aclk_gpu";
-
-			#clock-cells = <1>;
-		};
-	};
-
-};
diff --git a/src/arm/rk3188-radxarock.dts b/src/arm/rk3188-radxarock.dts
deleted file mode 100644
index 5e4e3c238b2d..000000000000
--- a/src/arm/rk3188-radxarock.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3188.dtsi"
-
-/ {
-	model = "Radxa Rock";
-	compatible = "radxa,rock", "rockchip,rk3188";
-
-	memory {
-		reg = <0x60000000 0x80000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		button@0 {
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		green {
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		yellow {
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		sleep {
-			gpios = <&gpio0 15 0>;
-			default-state = "off";
-		};
-	};
-
-	ir_recv: gpio-ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 10 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_recv_pin>;
-	};
-
-	vcc_sd0: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "sdmmc-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	act8846: act8846@5a {
-		compatible = "active-semi,act8846";
-		reg = <0x5a>;
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&act8846_dvs0_ctl>;
-
-		regulators {
-			vcc_ddr: REG1 {
-				regulator-name = "VCC_DDR";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vdd_log: REG2 {
-				regulator-name = "VDD_LOG";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vdd_arm: REG3 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <875000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-			};
-
-			vcc_io: REG4 {
-				regulator-name = "VCC_IO";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_10: REG5 {
-				regulator-name = "VDD_10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vdd_hdmi: REG6 {
-				regulator-name = "VDD_HDMI";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vcc18: REG7 {
-				regulator-name = "VCC_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcca_33: REG8 {
-				regulator-name = "VCCA_33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcc_rmii: REG9 {
-				regulator-name = "VCC_RMII";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vccio_wl: REG10 {
-				regulator-name = "VCCIO_WL";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcc_18: REG11 {
-				regulator-name = "VCC18_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcc28: REG12 {
-				regulator-name = "VCC_28";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&mmc0 {
-	num-slots = <1>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	vmmc-supply = <&vcc_sd0>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&pinctrl {
-	pcfg_output_low: pcfg-output-low {
-		output-low;
-	};
-
-	act8846 {
-		act8846_dvs0_ctl: act8846-dvs0-ctl {
-			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-	};
-
-	ir-receiver {
-		ir_recv_pin: ir-recv-pin {
-			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/src/arm/rk3188.dtsi b/src/arm/rk3188.dtsi
deleted file mode 100644
index ee801a9c6b74..000000000000
--- a/src/arm/rk3188.dtsi
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/clock/rk3188-cru.h>
-#include "rk3xxx.dtsi"
-
-/ {
-	compatible = "rockchip,rk3188";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "rockchip,rk3066-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x3>;
-		};
-	};
-
-	sram: sram@10080000 {
-		compatible = "mmio-sram";
-		reg = <0x10080000 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x10080000 0x8000>;
-
-		smp-sram@0 {
-			compatible = "rockchip,rk3066-smp-sram";
-			reg = <0x0 0x50>;
-		};
-	};
-
-	cru: clock-controller@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pinctrl: pinctrl {
-		compatible = "rockchip,rk3188-pinctrl";
-		rockchip,grf = <&grf>;
-		rockchip,pmu = <&pmu>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@0x2000a000 {
-			compatible = "rockchip,rk3188-gpio-bank0";
-			reg = <0x2000a000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO0>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@0x2003c000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio2@2003e000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003e000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO2>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio3@20080000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20080000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO3>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcfg_pull_up: pcfg_pull_up {
-			bias-pull-up;
-		};
-
-		pcfg_pull_down: pcfg_pull_down {
-			bias-pull-down;
-		};
-
-		pcfg_pull_none: pcfg_pull_none {
-			bias-disable;
-		};
-
-		i2c0 {
-			i2c0_xfer: i2c0-xfer {
-				rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c1 {
-			i2c1_xfer: i2c1-xfer {
-				rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c2 {
-			i2c2_xfer: i2c2-xfer {
-				rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c3 {
-			i2c3_xfer: i2c3-xfer {
-				rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>,
-						<RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c4 {
-			i2c4_xfer: i2c4-xfer {
-				rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm0 {
-			pwm0_out: pwm0-out {
-				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm1 {
-			pwm1_out: pwm1-out {
-				rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm2 {
-			pwm2_out: pwm2-out {
-				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm3 {
-			pwm3_out: pwm3-out {
-				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart0 {
-			uart0_xfer: uart0-xfer {
-				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_cts: uart0-cts {
-				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_rts: uart0-rts {
-				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart1 {
-			uart1_xfer: uart1-xfer {
-				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_cts: uart1-cts {
-				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_rts: uart1-rts {
-				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart2 {
-			uart2_xfer: uart2-xfer {
-				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-			/* no rts / cts for uart2 */
-		};
-
-		uart3 {
-			uart3_xfer: uart3-xfer {
-				rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_cts: uart3-cts {
-				rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_rts: uart3-rts {
-				rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		sd0 {
-			sd0_clk: sd0-clk {
-				rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_cmd: sd0-cmd {
-				rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_cd: sd0-cd {
-				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_wp: sd0-wp {
-				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_pwr: sd0-pwr {
-				rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_bus1: sd0-bus-width1 {
-				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_bus4: sd0-bus-width4 {
-				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		sd1 {
-			sd1_clk: sd1-clk {
-				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_cmd: sd1-cmd {
-				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_cd: sd1-cd {
-				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_wp: sd1-wp {
-				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_bus1: sd1-bus-width1 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_bus4: sd1-bus-width4 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-	};
-};
-
-&global_timer {
-	interrupts = <GIC_PPI 11 0xf04>;
-};
-
-&local_timer {
-	interrupts = <GIC_PPI 13 0xf04>;
-};
-
-&i2c0 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_xfer>;
-};
-
-&i2c1 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_xfer>;
-};
-
-&i2c2 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_xfer>;
-};
-
-&i2c3 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_xfer>;
-};
-
-&i2c4 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_xfer>;
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_out>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm1_out>;
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm2_out>;
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_out>;
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_xfer>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_xfer>;
-};
-
-&wdt {
-	compatible = "rockchip,rk3188-wdt", "snps,dw-wdt";
-};
diff --git a/src/arm/rk3288-evb-act8846.dts b/src/arm/rk3288-evb-act8846.dts
deleted file mode 100644
index 7d59ff4de408..000000000000
--- a/src/arm/rk3288-evb-act8846.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-
-/ {
-	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
-};
-
-&i2c0 {
-	hym8563@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-
-		#clock-cells = <0>;
-		clock-output-names = "xin32k";
-	};
-
-	act8846: act8846@5a {
-		compatible = "active-semi,act8846";
-		reg = <0x5a>;
-		status = "okay";
-
-		regulators {
-			vcc_ddr: REG1 {
-				regulator-name = "VCC_DDR";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vcc_io: REG2 {
-				regulator-name = "VCC_IO";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_log: REG3 {
-				regulator-name = "VDD_LOG";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcc_20: REG4 {
-				regulator-name = "VCC_20";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			vccio_sd: REG5 {
-				regulator-name = "VCCIO_SD";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd10_lcd: REG6 {
-				regulator-name = "VDD10_LCD";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcca_codec: REG7 {
-				regulator-name = "VCCA_CODEC";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcca_tp: REG8 {
-				regulator-name = "VCCA_TP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vccio_pmu: REG9 {
-				regulator-name = "VCCIO_PMU";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_10: REG10 {
-				regulator-name = "VDD_10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcc_18: REG11 {
-				regulator-name = "VCC_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcc18_lcd: REG12 {
-				regulator-name = "VCC18_LCD";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
diff --git a/src/arm/rk3288-evb-rk808.dts b/src/arm/rk3288-evb-rk808.dts
deleted file mode 100644
index 9a88b6c66396..000000000000
--- a/src/arm/rk3288-evb-rk808.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-
-/ {
-	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
-};
diff --git a/src/arm/rk3288-evb.dtsi b/src/arm/rk3288-evb.dtsi
deleted file mode 100644
index 4f572093c8b4..000000000000
--- a/src/arm/rk3288-evb.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "rk3288.dtsi"
-
-/ {
-	memory {
-		reg = <0x0 0x80000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		button@0 {
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
-			debounce-interval = <100>;
-		};
-	};
-
-	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
-	vcc_host: vcc-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc_host";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
diff --git a/src/arm/rk3288.dtsi b/src/arm/rk3288.dtsi
deleted file mode 100644
index 5950b0a53224..000000000000
--- a/src/arm/rk3288.dtsi
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/clock/rk3288-cru.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "rockchip,rk3288";
-
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@500 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x500>;
-		};
-		cpu@501 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x501>;
-		};
-		cpu@502 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x502>;
-		};
-		cpu@503 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x503>;
-		};
-	};
-
-	xin24m: oscillator {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xin24m";
-		#clock-cells = <0>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clock-frequency = <24000000>;
-	};
-
-	i2c1: i2c@ff140000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff140000 0x1000>;
-		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_xfer>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ff150000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff150000 0x1000>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_xfer>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@ff160000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff160000 0x1000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_xfer>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@ff170000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff170000 0x1000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C5>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_xfer>;
-		status = "disabled";
-	};
-
-	uart0: serial@ff180000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff180000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_xfer>;
-		status = "disabled";
-	};
-
-	uart1: serial@ff190000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff190000 0x100>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_xfer>;
-		status = "disabled";
-	};
-
-	uart2: serial@ff690000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff690000 0x100>;
-		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2_xfer>;
-		status = "disabled";
-	};
-
-	uart3: serial@ff1b0000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff1b0000 0x100>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart3_xfer>;
-		status = "disabled";
-	};
-
-	uart4: serial@ff1c0000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff1c0000 0x100>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart4_xfer>;
-		status = "disabled";
-	};
-
-	usb_host0_ehci: usb@ff500000 {
-		compatible = "generic-ehci";
-		reg = <0xff500000 0x100>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_USBHOST0>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
-	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
-
-	usb_hsic: usb@ff5c0000 {
-		compatible = "generic-ehci";
-		reg = <0xff5c0000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_HSIC>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
-	i2c0: i2c@ff650000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff650000 0x1000>;
-		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_xfer>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ff660000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff660000 0x1000>;
-		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_xfer>;
-		status = "disabled";
-	};
-
-	pmu: power-management@ff730000 {
-		compatible = "rockchip,rk3288-pmu", "syscon";
-		reg = <0xff730000 0x100>;
-	};
-
-	sgrf: syscon@ff740000 {
-		compatible = "rockchip,rk3288-sgrf", "syscon";
-		reg = <0xff740000 0x1000>;
-	};
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3288-cru";
-		reg = <0xff760000 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3288-grf", "syscon";
-		reg = <0xff770000 0x1000>;
-	};
-
-	wdt: watchdog@ff800000 {
-		compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
-		reg = <0xff800000 0x100>;
-		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	gic: interrupt-controller@ffc01000 {
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-
-		reg = <0xffc01000 0x1000>,
-		      <0xffc02000 0x1000>,
-		      <0xffc04000 0x2000>,
-		      <0xffc06000 0x2000>;
-		interrupts = <GIC_PPI 9 0xf04>;
-	};
-
-	pinctrl: pinctrl {
-		compatible = "rockchip,rk3288-pinctrl";
-		rockchip,grf = <&grf>;
-		rockchip,pmu = <&pmu>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@ff750000 {
-			compatible = "rockchip,gpio-bank";
-			reg =	<0xff750000 0x100>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO0>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@ff780000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff780000 0x100>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio2@ff790000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff790000 0x100>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO2>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio3@ff7a0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7a0000 0x100>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO3>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio4@ff7b0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7b0000 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO4>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio5@ff7c0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7c0000 0x100>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO5>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio6@ff7d0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7d0000 0x100>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO6>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio7: gpio7@ff7e0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7e0000 0x100>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO7>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio8: gpio8@ff7f0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7f0000 0x100>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO8>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcfg_pull_up: pcfg-pull-up {
-			bias-pull-up;
-		};
-
-		pcfg_pull_down: pcfg-pull-down {
-			bias-pull-down;
-		};
-
-		pcfg_pull_none: pcfg-pull-none {
-			bias-disable;
-		};
-
-		i2c0 {
-			i2c0_xfer: i2c0-xfer {
-				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
-						<0 16 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c1 {
-			i2c1_xfer: i2c1-xfer {
-				rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
-						<8 5 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c2 {
-			i2c2_xfer: i2c2-xfer {
-				rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
-						<6 10 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c3 {
-			i2c3_xfer: i2c3-xfer {
-				rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
-						<2 17 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c4 {
-			i2c4_xfer: i2c4-xfer {
-				rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
-						<7 18 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c5 {
-			i2c5_xfer: i2c5-xfer {
-				rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
-						<7 20 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		sdmmc {
-			sdmmc_clk: sdmmc-clk {
-				rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sdmmc_cmd: sdmmc-cmd {
-				rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
-			};
-
-			sdmmc_cd: sdmcc-cd {
-				rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
-			};
-
-			sdmmc_bus1: sdmmc-bus1 {
-				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
-			};
-
-			sdmmc_bus4: sdmmc-bus4 {
-				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
-						<6 17 RK_FUNC_1 &pcfg_pull_up>,
-						<6 18 RK_FUNC_1 &pcfg_pull_up>,
-						<6 19 RK_FUNC_1 &pcfg_pull_up>;
-			};
-		};
-
-		emmc {
-			emmc_clk: emmc-clk {
-				rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
-			};
-
-			emmc_cmd: emmc-cmd {
-				rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_pwr: emmc-pwr {
-				rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_bus1: emmc-bus1 {
-				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_bus4: emmc-bus4 {
-				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
-						<3 1 RK_FUNC_2 &pcfg_pull_up>,
-						<3 2 RK_FUNC_2 &pcfg_pull_up>,
-						<3 3 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_bus8: emmc-bus8 {
-				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
-						<3 1 RK_FUNC_2 &pcfg_pull_up>,
-						<3 2 RK_FUNC_2 &pcfg_pull_up>,
-						<3 3 RK_FUNC_2 &pcfg_pull_up>,
-						<3 4 RK_FUNC_2 &pcfg_pull_up>,
-						<3 5 RK_FUNC_2 &pcfg_pull_up>,
-						<3 6 RK_FUNC_2 &pcfg_pull_up>,
-						<3 7 RK_FUNC_2 &pcfg_pull_up>;
-			};
-		};
-
-		uart0 {
-			uart0_xfer: uart0-xfer {
-				rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
-						<4 17 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_cts: uart0-cts {
-				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_rts: uart0-rts {
-				rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart1 {
-			uart1_xfer: uart1-xfer {
-				rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
-						<5 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_cts: uart1-cts {
-				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_rts: uart1-rts {
-				rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart2 {
-			uart2_xfer: uart2-xfer {
-				rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
-						<7 23 RK_FUNC_1 &pcfg_pull_none>;
-			};
-			/* no rts / cts for uart2 */
-		};
-
-		uart3 {
-			uart3_xfer: uart3-xfer {
-				rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
-						<7 8 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_cts: uart3-cts {
-				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_rts: uart3-rts {
-				rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart4 {
-			uart4_xfer: uart4-xfer {
-				rockchip,pins = <5 12 3 &pcfg_pull_up>,
-						<5 13 3 &pcfg_pull_none>;
-			};
-
-			uart4_cts: uart4-cts {
-				rockchip,pins = <5 14 3 &pcfg_pull_none>;
-			};
-
-			uart4_rts: uart4-rts {
-				rockchip,pins = <5 15 3 &pcfg_pull_none>;
-			};
-		};
-	};
-};
diff --git a/src/arm/rk3xxx.dtsi b/src/arm/rk3xxx.dtsi
deleted file mode 100644
index 8caf85d83901..000000000000
--- a/src/arm/rk3xxx.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-	};
-
-	xin24m: oscillator {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-		clock-output-names = "xin24m";
-	};
-
-	L2: l2-cache-controller@10138000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x10138000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	scu@1013c000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x1013c000 0x100>;
-	};
-
-	global_timer: global-timer@1013c200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x1013c200 0x20>;
-		interrupts = <GIC_PPI 11 0x304>;
-		clocks = <&cru CORE_PERI>;
-	};
-
-	local_timer: local-timer@1013c600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x1013c600 0x20>;
-		interrupts = <GIC_PPI 13 0x304>;
-		clocks = <&cru CORE_PERI>;
-	};
-
-	gic: interrupt-controller@1013d000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x1013d000 0x1000>,
-		      <0x1013c100 0x0100>;
-	};
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		status = "disabled";
-	};
-
-	uart1: serial@10126000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10126000 0x400>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
-		status = "disabled";
-	};
-
-	mmc0: dwmmc@10214000 {
-		compatible = "rockchip,rk2928-dw-mshc";
-		reg = <0x10214000 0x1000>;
-		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
-		clock-names = "biu", "ciu";
-
-		status = "disabled";
-	};
-
-	mmc1: dwmmc@10218000 {
-		compatible = "rockchip,rk2928-dw-mshc";
-		reg = <0x10218000 0x1000>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
-		clock-names = "biu", "ciu";
-
-		status = "disabled";
-	};
-
-	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon";
-		reg = <0x20004000 0x100>;
-	};
-
-	grf: grf@20008000 {
-		compatible = "syscon";
-		reg = <0x20008000 0x200>;
-	};
-
-	i2c0: i2c@2002d000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2002d000 0x1000>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-		rockchip,bus-index = <0>;
-
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C0>;
-
-		status = "disabled";
-	};
-
-	i2c1: i2c@2002f000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2002f000 0x1000>;
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C1>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	pwm0: pwm@20030000 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20030000 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM01>;
-		status = "disabled";
-	};
-
-	pwm1: pwm@20030010 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20030010 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM01>;
-		status = "disabled";
-	};
-
-	wdt: watchdog@2004c000 {
-		compatible = "snps,dw-wdt";
-		reg = <0x2004c000 0x100>;
-		clocks = <&cru PCLK_WDT>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	pwm2: pwm@20050020 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20050020 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM23>;
-		status = "disabled";
-	};
-
-	pwm3: pwm@20050030 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20050030 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM23>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@20056000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x20056000 0x1000>;
-		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C2>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	i2c3: i2c@2005a000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2005a000 0x1000>;
-		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C3>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	i2c4: i2c@2005e000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2005e000 0x1000>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C4>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	uart2: serial@20064000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20064000 0x400>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		status = "disabled";
-	};
-
-	uart3: serial@20068000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20068000 0x400>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/s3c2416-pinctrl.dtsi b/src/arm/s3c2416-pinctrl.dtsi
deleted file mode 100644
index 527e3193817f..000000000000
--- a/src/arm/s3c2416-pinctrl.dtsi
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Samsung S3C2416 pinctrl settings
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&pinctrl_0 {
-	/*
-	 * Pin banks
-	 */
-
-	gpa: gpa {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpc: gpc {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpd: gpd {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe: gpe {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpf: gpf {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg: gpg {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph: gph {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpj: gpj {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk: gpk {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpl: gpl {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpm: gpm {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	/*
-	 * Pin groups
-	 */
-
-	uart0_data: uart0-data {
-		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <2>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <2>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <2>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <2>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <2>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
-	};
-
-	extuart_clk: extuart-clk {
-		samsung,pins = "gph-12";
-		samsung,pin-function = <2>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <2>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpe-5";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpe-6";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_bus1: sd0-bus1 {
-		samsung,pins = "gpe-7";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_bus4: sd0-bus4 {
-		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpl-8";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpl-9";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_bus1: sd1-bus1 {
-		samsung,pins = "gpl-0";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_bus4: sd1-bus4 {
-		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <2>;
-	};
-};
diff --git a/src/arm/s3c2416-smdk2416.dts b/src/arm/s3c2416-smdk2416.dts
deleted file mode 100644
index ea92fd69529a..000000000000
--- a/src/arm/s3c2416-smdk2416.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * SAMSUNG SMDK2416 board device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "s3c2416.dtsi"
-
-/ {
-	model = "SMDK2416";
-	compatible = "samsung,s3c2416";
-
-	memory {
-		reg =  <0x30000000 0x4000000>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		xti: xti {
-			compatible = "fixed-clock";
-			clock-frequency = <12000000>;
-			clock-output-names = "xti";
-			#clock-cells = <0>;
-		};
-	};
-
-	serial@50000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-	};
-
-	serial@50004000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-	};
-
-	serial@50008000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2_data>;
-	};
-
-	serial@5000C000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart3_data>;
-	};
-
-	watchdog@53000000 {
-		status = "okay";
-	};
-
-	rtc@57000000 {
-		status = "okay";
-	};
-
-	sdhci@4AC00000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
-				<&sd0_bus1>, <&sd0_bus4>;
-		bus-width = <4>;
-		cd-gpios = <&gpf 1 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	sdhci@4A800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
-				<&sd1_bus1>, <&sd1_bus4>;
-		bus-width = <4>;
-		broken-cd;
-		status = "okay";
-	};
-};
diff --git a/src/arm/s3c2416.dtsi b/src/arm/s3c2416.dtsi
deleted file mode 100644
index 30b8f7e47454..000000000000
--- a/src/arm/s3c2416.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Samsung's S3C2416 SoC device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/s3c2443.h>
-#include "s3c24xx.dtsi"
-#include "s3c2416-pinctrl.dtsi"
-
-/ {
-	model = "Samsung S3C2416 SoC";
-	compatible = "samsung,s3c2416";
-
-	aliases {
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2416-irq";
-	};
-
-	clocks: clock-controller@0x4c000000 {
-		compatible = "samsung,s3c2416-clock";
-		reg = <0x4c000000 0x40>;
-		#clock-cells = <1>;
-	};
-
-	pinctrl@56000000 {
-		compatible = "samsung,s3c2416-pinctrl";
-	};
-
-	timer@51000000 {
-		clocks = <&clocks PCLK_PWM>;
-		clock-names = "timers";
-	};
-
-	serial@50000000 {
-		compatible = "samsung,s3c2440-uart";
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-				<&clocks SCLK_UART>;
-	};
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-				<&clocks SCLK_UART>;
-	};
-
-	serial@50008000 {
-		compatible = "samsung,s3c2440-uart";
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
-				<&clocks SCLK_UART>;
-	};
-
-	uart3: serial@5000C000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x5000C000 0x4000>;
-		interrupts = <1 18 24 4>, <1 18 25 4>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
-				<&clocks SCLK_UART>;
-		status = "disabled";
-	};
-
-	sdhci@4AC00000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4AC00000 0x100>;
-		interrupts = <0 0 21 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
-				<&clocks MUX_HSMMC0>;
-		status = "disabled";
-	};
-
-	sdhci@4A800000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4A800000 0x100>;
-		interrupts = <0 0 20 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
-				<&clocks MUX_HSMMC1>;
-		status = "disabled";
-	};
-
-	watchdog@53000000 {
-		interrupts = <1 9 27 3>;
-		clocks = <&clocks PCLK_WDT>;
-		clock-names = "watchdog";
-	};
-
-	rtc@57000000 {
-		compatible = "samsung,s3c2416-rtc";
-		clocks = <&clocks PCLK_RTC>;
-		clock-names = "rtc";
-	};
-
-	i2c@54000000 {
-		compatible = "samsung,s3c2440-i2c";
-		clocks = <&clocks PCLK_I2C0>;
-		clock-names = "i2c";
-	};
-};
diff --git a/src/arm/s3c24xx.dtsi b/src/arm/s3c24xx.dtsi
deleted file mode 100644
index 5ed43b857cc4..000000000000
--- a/src/arm/s3c24xx.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Samsung's S3C24XX family device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "samsung,s3c24xx";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	intc:interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
-
-	pinctrl_0: pinctrl@56000000 {
-		reg = <0x56000000 0x1000>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,s3c2410-wakeup-eint";
-			interrupts = <0 0 0 3>,
-				     <0 0 1 3>,
-				     <0 0 2 3>,
-				     <0 0 3 3>,
-				     <0 0 4 4>,
-				     <0 0 5 4>;
-		};
-	};
-
-	timer@51000000 {
-		compatible = "samsung,s3c2410-pwm";
-		reg = <0x51000000 0x1000>;
-		interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
-		#pwm-cells = <4>;
-	};
-
-	uart0: serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-		status = "disabled";
-	};
-
-	uart1: serial@50004000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		status = "disabled";
-	};
-
-	uart2: serial@50008000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50008000 0x4000>;
-		interrupts = <1 15 6 4>, <1 15 7 4>;
-		status = "disabled";
-	};
-
-	watchdog@53000000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x53000000 0x100>;
-		interrupts = <0 0 9 3>;
-		status = "disabled";
-	};
-
-	rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupts = <0 0 30 3>, <0 0 8 3>;
-		status = "disabled";
-	};
-
-	i2c@54000000 {
-		compatible = "samsung,s3c2410-i2c";
-		reg = <0x54000000 0x100>;
-		interrupts = <0 0 27 3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/s3c6400.dtsi b/src/arm/s3c6400.dtsi
deleted file mode 100644
index a7d1c8ec150d..000000000000
--- a/src/arm/s3c6400.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Samsung's S3C6400 SoC device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "s3c64xx.dtsi"
-
-/ {
-	compatible = "samsung,s3c6400";
-};
-
-&vic0 {
-	valid-mask = <0xfffffe1f>;
-	valid-wakeup-mask = <0x00200004>;
-};
-
-&vic1 {
-	valid-mask = <0xffffffff>;
-	valid-wakeup-mask = <0x53020000>;
-};
-
-&soc {
-	clocks: clock-controller@7e00f000 {
-		compatible = "samsung,s3c6400-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-};
diff --git a/src/arm/s3c6410-mini6410.dts b/src/arm/s3c6410-mini6410.dts
deleted file mode 100644
index 57e00f9bce99..000000000000
--- a/src/arm/s3c6410-mini6410.dts
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Samsung's S3C6410 based Mini6410 board device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Device tree source file for FriendlyARM Mini6410 board which is based on
- * Samsung's S3C6410 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "s3c6410.dtsi"
-
-/ {
-	model = "FriendlyARM Mini6410 board based on S3C6410";
-	compatible = "friendlyarm,mini6410", "samsung,s3c6410";
-
-	memory {
-		reg = <0x50000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fin_pll: oscillator@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <12000000>;
-			clock-output-names = "fin_pll";
-			#clock-cells = <0>;
-		};
-
-		xusbxti: oscillator@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			clock-output-names = "xusbxti";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	srom-cs1@18000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x18000000 0x8000000>;
-		ranges;
-
-		ethernet@18000000 {
-			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
-			interrupt-parent = <&gpn>;
-			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-			davicom,no-eeprom;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys>;
-		autorepeat;
-
-		button-k1 {
-			label = "K1";
-			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
-			linux,code = <2>;
-			debounce-interval = <20>;
-		};
-
-		button-k2 {
-			label = "K2";
-			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
-			linux,code = <3>;
-			debounce-interval = <20>;
-		};
-
-		button-k3 {
-			label = "K3";
-			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
-			linux,code = <4>;
-			debounce-interval = <20>;
-		};
-
-		button-k4 {
-			label = "K4";
-			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-			debounce-interval = <20>;
-		};
-
-		button-k5 {
-			label = "K5";
-			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-			debounce-interval = <20>;
-		};
-
-		button-k6 {
-			label = "K6";
-			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-			debounce-interval = <20>;
-		};
-
-		button-k7 {
-			label = "K7";
-			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-			debounce-interval = <20>;
-		};
-
-		button-k8 {
-			label = "K8";
-			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_leds>;
-
-		led-1 {
-			label = "LED1";
-			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-2 {
-			label = "LED2";
-			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "mmc0";
-		};
-
-		led-3 {
-			label = "LED3";
-			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led-4 {
-			label = "LED4";
-			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	buzzer {
-		compatible = "pwm-beeper";
-		pwms = <&pwm 0 1000000 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm0_out>;
-	};
-};
-
-&sdhci0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_data>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_data>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_data>;
-	status = "okay";
-};
-
-&pwm {
-	status = "okay";
-};
-
-&pinctrl0 {
-	gpio_leds: gpio-leds {
-		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	gpio_keys: gpio-keys {
-		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
-				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
diff --git a/src/arm/s3c6410-smdk6410.dts b/src/arm/s3c6410-smdk6410.dts
deleted file mode 100644
index ecf35ec466f7..000000000000
--- a/src/arm/s3c6410-smdk6410.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Samsung S3C6410 based SMDK6410 board device tree source.
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Device tree source file for SAMSUNG SMDK6410 board which is based on
- * Samsung's S3C6410 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "s3c6410.dtsi"
-
-/ {
-	model = "SAMSUNG SMDK6410 board based on S3C6410";
-	compatible = "samsung,mini6410", "samsung,s3c6410";
-
-	memory {
-		reg = <0x50000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fin_pll: oscillator@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <12000000>;
-			clock-output-names = "fin_pll";
-			#clock-cells = <0>;
-		};
-
-		xusbxti: oscillator@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			clock-output-names = "xusbxti";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	srom-cs1@18000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x18000000 0x8000000>;
-		ranges;
-
-		ethernet@18000000 {
-			compatible = "smsc,lan9115";
-			reg = <0x18000000 0x10000>;
-			interrupt-parent = <&gpn>;
-			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,force-internal-phy;
-		};
-	};
-};
-
-&sdhci0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_data>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_data>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_data>;
-	status = "okay";
-};
diff --git a/src/arm/s3c6410.dtsi b/src/arm/s3c6410.dtsi
deleted file mode 100644
index eb4226b3407c..000000000000
--- a/src/arm/s3c6410.dtsi
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Samsung's S3C6410 SoC device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "s3c64xx.dtsi"
-
-/ {
-	compatible = "samsung,s3c6410";
-
-	aliases {
-		i2c1 = &i2c1;
-	};
-};
-
-&vic0 {
-	valid-mask = <0xffffff7f>;
-	valid-wakeup-mask = <0x00200004>;
-};
-
-&vic1 {
-	valid-mask = <0xffffffff>;
-	valid-wakeup-mask = <0x53020000>;
-};
-
-&soc {
-	clocks: clock-controller@7e00f000 {
-		compatible = "samsung,s3c6410-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	i2c1: i2c@7f00f000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x7f00f000 0x1000>;
-		interrupt-parent = <&vic0>;
-		interrupts = <5>;
-		clock-names = "i2c";
-		clocks = <&clocks PCLK_IIC1>;
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/src/arm/s3c64xx-pinctrl.dtsi b/src/arm/s3c64xx-pinctrl.dtsi
deleted file mode 100644
index b1197d8b04de..000000000000
--- a/src/arm/s3c64xx-pinctrl.dtsi
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * Samsung's S3C64xx SoC series common device tree source
- * - pin control-related definitions
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
- * listed as device tree nodes in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	2
-
-&pinctrl0 {
-	/*
-	 * Pin banks
-	 */
-
-	gpa: gpa {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc: gpc {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd: gpd {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe: gpe {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpf: gpf {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg: gpg {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph: gph {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpi: gpi {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpj: gpj {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk: gpk {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpl: gpl {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm: gpm {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpn: gpn {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpo: gpo {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpp: gpp {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpq: gpq {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	/*
-	 * Pin groups
-	 */
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa-0", "gpa-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa-2", "gpa-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa-4", "gpa-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa-6", "gpa-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ext_dma_0: ext-dma-0 {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ext_dma_1: ext-dma-1 {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	irda_data_0: irda-data-0 {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	irda_data_1: irda-data-1 {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	irda_sdbw: irda-sdbw {
-		samsung,pins = "gpb-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpb-5", "gpb-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		/* S3C6410-only */
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <6>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	spi0_cs: spi0-cs {
-		samsung,pins = "gpc-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	spi1_cs: spi1-cs {
-		samsung,pins = "gpc-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpg-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpg-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_bus1: sd0-bus1 {
-		samsung,pins = "gpg-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_bus4: sd0-bus4 {
-		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpg-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gph-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gph-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_bus1: sd1-bus1 {
-		samsung,pins = "gph-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_bus4: sd1-bus4 {
-		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_bus8: sd1-bus8 {
-		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
-				"gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpg-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpc-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpc-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd2_bus1: sd2-bus1 {
-		samsung,pins = "gph-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd2_bus4: sd2-bus4 {
-		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s0_cdclk: i2s0-cdclk {
-		samsung,pins = "gpd-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s1_cdclk: i2s1-cdclk {
-		samsung,pins = "gpe-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		/* S3C6410-only */
-		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
-				"gph-8", "gph-9";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s2_cdclk: i2s2-cdclk {
-		/* S3C6410-only */
-		samsung,pins = "gph-7";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm0_bus: pcm0-bus {
-		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm0_extclk: pcm0-extclk {
-		samsung,pins = "gpd-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm1_extclk: pcm1-extclk {
-		samsung,pins = "gpe-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ac97_bus_0: ac97-bus-0 {
-		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ac97_bus_1: ac97-bus-1 {
-		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	cam_port: cam-port {
-		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
-				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
-				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	cam_rst: cam-rst {
-		samsung,pins = "gpf-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	cam_field: cam-field {
-		/* S3C6410-only */
-		samsung,pins = "gpb-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pwm_extclk: pwm-extclk {
-		samsung,pins = "gpf-13";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpf-14";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpf-15";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	clkout0: clkout-0 {
-		samsung,pins = "gpf-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col0_0: keypad-col0-0 {
-		samsung,pins = "gph-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col1_0: keypad-col1-0 {
-		samsung,pins = "gph-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col2_0: keypad-col2-0 {
-		samsung,pins = "gph-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col3_0: keypad-col3-0 {
-		samsung,pins = "gph-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col4_0: keypad-col4-0 {
-		samsung,pins = "gph-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col5_0: keypad-col5-0 {
-		samsung,pins = "gph-5";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col6_0: keypad-col6-0 {
-		samsung,pins = "gph-6";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col7_0: keypad-col7-0 {
-		samsung,pins = "gph-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col0_1: keypad-col0-1 {
-		samsung,pins = "gpl-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col1_1: keypad-col1-1 {
-		samsung,pins = "gpl-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col2_1: keypad-col2-1 {
-		samsung,pins = "gpl-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col3_1: keypad-col3-1 {
-		samsung,pins = "gpl-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col4_1: keypad-col4-1 {
-		samsung,pins = "gpl-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col5_1: keypad-col5-1 {
-		samsung,pins = "gpl-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col6_1: keypad-col6-1 {
-		samsung,pins = "gpl-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col7_1: keypad-col7-1 {
-		samsung,pins = "gpl-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row0_0: keypad-row0-0 {
-		samsung,pins = "gpk-8";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row1_0: keypad-row1-0 {
-		samsung,pins = "gpk-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row2_0: keypad-row2-0 {
-		samsung,pins = "gpk-10";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row3_0: keypad-row3-0 {
-		samsung,pins = "gpk-11";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row4_0: keypad-row4-0 {
-		samsung,pins = "gpk-12";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row5_0: keypad-row5-0 {
-		samsung,pins = "gpk-13";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row6_0: keypad-row6-0 {
-		samsung,pins = "gpk-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row7_0: keypad-row7-0 {
-		samsung,pins = "gpk-15";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row0_1: keypad-row0-1 {
-		samsung,pins = "gpn-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row1_1: keypad-row1-1 {
-		samsung,pins = "gpn-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row2_1: keypad-row2-1 {
-		samsung,pins = "gpn-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row3_1: keypad-row3-1 {
-		samsung,pins = "gpn-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row4_1: keypad-row4-1 {
-		samsung,pins = "gpn-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row5_1: keypad-row5-1 {
-		samsung,pins = "gpn-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row6_1: keypad-row6-1 {
-		samsung,pins = "gpn-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row7_1: keypad-row7-1 {
-		samsung,pins = "gpn-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_ctrl: lcd-ctrl {
-		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_data16: lcd-data-width16 {
-		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
-				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
-				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
-				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_data18: lcd-data-width18 {
-		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
-				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
-				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
-				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
-				"gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_data24: lcd-data-width24 {
-		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
-				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
-				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
-				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
-				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
-				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	hsi_bus: hsi-bus {
-		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
-				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-};
diff --git a/src/arm/s3c64xx.dtsi b/src/arm/s3c64xx.dtsi
deleted file mode 100644
index ff5bdaac987a..000000000000
--- a/src/arm/s3c64xx.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Samsung's S3C64xx SoC series common device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C64xx SoC series device nodes are listed in this file.
- * Particular SoCs from S3C64xx series can include this file and provide
- * values for SoCs specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
-
-/ {
-	aliases {
-		i2c0 = &i2c0;
-		pinctrl0 = &pinctrl0;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm1176jzf-s", "arm,arm1176";
-			reg = <0x0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vic0: interrupt-controller@71200000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x71200000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@71300000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x71300000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		sdhci0: sdhci@7c200000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0x7c200000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <24>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
-					<&clocks SCLK_MMC0>;
-			status = "disabled";
-		};
-
-		sdhci1: sdhci@7c300000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0x7c300000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <25>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
-					<&clocks SCLK_MMC1>;
-			status = "disabled";
-		};
-
-		sdhci2: sdhci@7c400000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0x7c400000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <17>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
-					<&clocks SCLK_MMC2>;
-			status = "disabled";
-		};
-
-		watchdog: watchdog@7e004000 {
-			compatible = "samsung,s3c2410-wdt";
-			reg = <0x7e004000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <26>;
-			clock-names = "watchdog";
-			clocks = <&clocks PCLK_WDT>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7f004000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x7f004000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <18>;
-			clock-names = "i2c";
-			clocks = <&clocks PCLK_IIC0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart0: serial@7f005000 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <5>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		uart1: serial@7f005400 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005400 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <6>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		uart2: serial@7f005800 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005800 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <7>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		uart3: serial@7f005c00 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005c00 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <8>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		pwm: pwm@7f006000 {
-			compatible = "samsung,s3c6400-pwm";
-			reg = <0x7f006000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>, <24>, <25>, <27>, <28>;
-			clock-names = "timers";
-			clocks = <&clocks PCLK_PWM>;
-			samsung,pwm-outputs = <0>, <1>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pinctrl0: pinctrl@7f008000 {
-			compatible = "samsung,s3c64xx-pinctrl";
-			reg = <0x7f008000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <21>;
-
-			pctrl_int_map: pinctrl-interrupt-map {
-				interrupt-map = <0 &vic0 0>,
-						<1 &vic0 1>,
-						<2 &vic1 0>,
-						<3 &vic1 1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,s3c64xx-wakeup-eint";
-				interrupts = <0>, <1>, <2>, <3>;
-				interrupt-parent = <&pctrl_int_map>;
-			};
-		};
-	};
-};
-
-#include "s3c64xx-pinctrl.dtsi"
diff --git a/src/arm/s5pv210-aquila.dts b/src/arm/s5pv210-aquila.dts
deleted file mode 100644
index aa31b84a707a..000000000000
--- a/src/arm/s5pv210-aquila.dts
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for Samsung Aquila board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "Samsung Aquila based on S5PC110";
-	compatible = "samsung,aquila", "samsung,s5pv210";
-
-	aliases {
-		i2c3 = &i2c_pmic;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x18000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vtf_reg: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "V_TF_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpios = <&mp05 4 0>;
-			enable-active-high;
-		};
-
-		pda_reg: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VCC_1.8V_PDA";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			reg = <1>;
-		};
-
-		bat_reg: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_BAT";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			reg = <2>;
-		};
-	};
-
-	i2c_pmic: i2c-pmic {
-		compatible = "i2c-gpio";
-		gpios = <&gpj4 0 0>, /* sda */
-			<&gpj4 3 0>; /* scl */
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
-							<&gph0 4 0>;
-			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
-							<1200000>, <1200000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VCC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VCC_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC+VCAM_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_IO_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "CAM_ISP_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "CAM_A_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_CIF_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "CAM_8M_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VARM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VINT_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "CAM_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gph2 6 1>;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&keypad {
-	linux,input-no-autorepeat;
-	linux,input-wakeup;
-	samsung,keypad-num-rows = <3>;
-	samsung,keypad-num-columns = <3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
-			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
-	status = "okay";
-
-	key_1 {
-		keypad,row = <0>;
-		keypad,column = <1>;
-		linux,code = <KEY_CONNECT>;
-	};
-
-	key_2 {
-		keypad,row = <0>;
-		keypad,column = <2>;
-		linux,code = <KEY_BACK>;
-	};
-
-	key_3 {
-		keypad,row = <1>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA_FOCUS>;
-	};
-
-	key_4 {
-		keypad,row = <1>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEUP>;
-	};
-
-	key_5 {
-		keypad,row = <2>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA>;
-	};
-
-	key_6 {
-		keypad,row = <2>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-	vmmc-supply = <&ldo5_reg>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
-	pinctrl-names = "default";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gph3 4 1>;
-	vmmc-supply = <&vtf_reg>;
-	cd-inverted;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&onenand {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_a-supply = <&ldo3_reg>;
-	vusb_d-supply = <&ldo8_reg>;
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <0>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <16>;
-			hback-porch = <16>;
-			hsync-len = <2>;
-			vback-porch = <3>;
-			vfront-porch = <28>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&pinctrl0 {
-	t_flash_detect: t-flash-detect {
-		samsung,pins = "gph3-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-	};
-};
diff --git a/src/arm/s5pv210-goni.dts b/src/arm/s5pv210-goni.dts
deleted file mode 100644
index 6387c77a6f7b..000000000000
--- a/src/arm/s5pv210-goni.dts
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for Samsung Goni board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "Samsung Goni based on S5PC110";
-	compatible = "samsung,goni", "samsung,s5pv210";
-
-	aliases {
-		i2c3 = &i2c_pmic;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vtf_reg: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_TF_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			reg = <0>;
-			gpios = <&mp05 4 0>;
-			enable-active-high;
-		};
-
-		pda_reg: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VCC_1.8V_PDA";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			reg = <1>;
-		};
-
-		bat_reg: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_BAT";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			reg = <2>;
-		};
-
-		tsp_reg: fixed-regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_VDD";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			reg = <3>;
-			gpios = <&gpj1 3 0>;
-			enable-active-high;
-		};
-	};
-
-	i2c_pmic: i2c-pmic {
-		compatible = "i2c-gpio";
-		gpios = <&gpj4 0 0>, /* sda */
-			<&gpj4 3 0>; /* scl */
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
-							<&gph0 4 0>;
-			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
-							<1200000>, <1200000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VCC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC+VCAM_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_IO_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "CAM_ISP_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "CAM_A_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_CIF_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "CAM_8M_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VARM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VINT_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "CAM_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gph2 6 1>;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&keypad {
-	linux,input-no-autorepeat;
-	linux,input-wakeup;
-	samsung,keypad-num-rows = <3>;
-	samsung,keypad-num-columns = <3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
-			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
-	status = "okay";
-
-	key_1 {
-		keypad,row = <0>;
-		keypad,column = <1>;
-		linux,code = <KEY_CONNECT>;
-	};
-
-	key_2 {
-		keypad,row = <0>;
-		keypad,column = <2>;
-		linux,code = <KEY_BACK>;
-	};
-
-	key_3 {
-		keypad,row = <1>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA_FOCUS>;
-	};
-
-	key_4 {
-		keypad,row = <1>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEUP>;
-	};
-
-	key_5 {
-		keypad,row = <2>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA>;
-	};
-
-	key_6 {
-		keypad,row = <2>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&ldo5_reg>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gph3 4 1>;
-	vmmc-supply = <&vtf_reg>;
-	cd-inverted;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hsotg {
-	vusb_a-supply = <&ldo3_reg>;
-	vusb_d-supply = <&ldo8_reg>;
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&i2c2 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <400000>;
-	samsung,i2c-slave-addr = <0x10>;
-	status = "okay";
-
-	tsp@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpj0>;
-		interrupts = <5 2>;
-
-		atmel,x-line = <17>;
-		atmel,y-line = <11>;
-		atmel,x-size = <800>;
-		atmel,y-size = <480>;
-		atmel,burst-length = <0x21>;
-		atmel,threshold = <0x28>;
-		atmel,orientation = <1>;
-
-		vdd-supply = <&tsp_reg>;
-	};
-};
-
-&i2c0 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <100000>;
-	samsung,i2c-slave-addr = <0x10>;
-	status = "okay";
-
-	noon010pc30: sensor@30 {
-		compatible = "siliconfile,noon010pc30";
-		reg = <0x30>;
-		vddio-supply = <&ldo11_reg>;
-		vdda-supply = <&ldo13_reg>;
-		vdd_core-supply = <&ldo14_reg>;
-
-		clock-frequency = <16000000>;
-		clocks = <&clock_cam 0>;
-		clock-names = "mclk";
-		nreset-gpios = <&gpb 2 0>;
-		nstby-gpios = <&gpb 0 0>;
-
-		port {
-			noon010pc30_ep: endpoint {
-				remote-endpoint = <&fimc0_ep>;
-				bus-width = <8>;
-				hsync-active = <0>;
-				vsync-active = <1>;
-				pclk-sample = <1>;
-			};
-		};
-	};
-};
-
-&camera {
-	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
-	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
-	pinctrl-names = "default", "idle";
-
-	parallel-ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* camera A input */
-		port@1 {
-			reg = <1>;
-			fimc0_ep: endpoint {
-				remote-endpoint = <&noon010pc30_ep>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				pclk-sample = <0>;
-			};
-		};
-	};
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			/* 480x800@55Hz */
-			clock-frequency = <23439570>;
-			hactive = <480>;
-			hfront-porch = <16>;
-			hback-porch = <16>;
-			hsync-len = <2>;
-			vactive = <800>;
-			vback-porch = <2>;
-			vfront-porch = <28>;
-			vsync-len = <1>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <0>;
-			pixelclk-active = <0>;
-		};
-	};
-};
-
-&onenand {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210-pinctrl.dtsi b/src/arm/s5pv210-pinctrl.dtsi
deleted file mode 100644
index 8c714088e3c6..000000000000
--- a/src/arm/s5pv210-pinctrl.dtsi
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&pinctrl0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe0: gpe0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf3: gpf3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg0: gpg0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg1: gpg1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg2: gpg2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg3: gpg3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj0: gpj0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj2: gpj2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj3: gpj3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj4: gpj4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpgi: gpgi {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp01: mp01 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp02: mp02 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp03: mp03 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp04: mp04 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp05: mp05 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp06: mp06 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp07: mp07 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gph0: gph0 {
-		gpio-controller;
-		interrupt-controller;
-		interrupt-parent = <&vic0>;
-		interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	gph1: gph1 {
-		gpio-controller;
-		interrupt-controller;
-		interrupt-parent = <&vic0>;
-		interrupts = <8>, <9>, <10>, <11>,
-				<12>, <13>, <14>, <15>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	gph2: gph2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	gph3: gph3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart_audio: uart-audio {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
-				"gpi-4", "gpi-5", "gpi-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ac97_bus: ac97-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	spdif_bus: spdif-bus {
-		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row0: keypad-row-0 {
-		samsung,pins = "gph3-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row1: keypad-row-1 {
-		samsung,pins = "gph3-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row2: keypad-row-2 {
-		samsung,pins = "gph3-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row3: keypad-row-3 {
-		samsung,pins = "gph3-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row4: keypad-row-4 {
-		samsung,pins = "gph3-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row5: keypad-row-5 {
-		samsung,pins = "gph3-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row6: keypad-row-6 {
-		samsung,pins = "gph3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row7: keypad-row-7 {
-		samsung,pins = "gph3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col0: keypad-col-0 {
-		samsung,pins = "gph2-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col1: keypad-col-1 {
-		samsung,pins = "gph2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col2: keypad-col-2 {
-		samsung,pins = "gph2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col3: keypad-col-3 {
-		samsung,pins = "gph2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col4: keypad-col-4 {
-		samsung,pins = "gph2-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col5: keypad-col-5 {
-		samsung,pins = "gph2-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col6: keypad-col-6 {
-		samsung,pins = "gph2-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col7: keypad-col-7 {
-		samsung,pins = "gph2-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpg0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpg0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpg0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpg0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpg1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpg1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpg1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpg1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpg2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpg2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus8: sd2-bus-width8 {
-		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_clk: sd3-clk {
-		samsung,pins = "gpg3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_cmd: sd3-cmd {
-		samsung,pins = "gpg3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_cd: sd3-cd {
-		samsung,pins = "gpg3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_bus1: sd3-bus-width1 {
-		samsung,pins = "gpg3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_bus4: sd3-bus-width4 {
-		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	eint0: ext-int0 {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint8: ext-int8 {
-		samsung,pins = "gph1-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint15: ext-int15 {
-		samsung,pins = "gph1-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint16: ext-int16 {
-		samsung,pins = "gph2-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint31: ext-int31 {
-		samsung,pins = "gph3-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_a_io: cam-port-a-io {
-		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_a_clk_active: cam-port-a-clk-active {
-		samsung,pins = "gpe1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
-		samsung,pins = "gpe1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-
-		lcd_ctrl: lcd-ctrl {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lcd_sync: lcd-sync {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lcd_clk: lcd-clk {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lcd_data24: lcd-data-width24 {
-		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
diff --git a/src/arm/s5pv210-smdkc110.dts b/src/arm/s5pv210-smdkc110.dts
deleted file mode 100644
index 1eedab7ffe94..000000000000
--- a/src/arm/s5pv210-smdkc110.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for YIC System SMDC110 board.
- *
- * NOTE: This file is completely based on original board file for mach-smdkc110
- * available in Linux 3.15 and intends to provide equivalent level of hardware
- * support. Due to lack of hardware, _no_ testing has been performed.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "YIC System SMDKC110 based on S5PC110";
-	compatible = "yic,smdkc110", "samsung,s5pv210";
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x20000000>;
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	audio-codec@1b {
-		compatible = "wlf,wm8580";
-		reg = <0x1b>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210-smdkv210.dts b/src/arm/s5pv210-smdkv210.dts
deleted file mode 100644
index cb8521899ec8..000000000000
--- a/src/arm/s5pv210-smdkv210.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for YIC System SMDV210 board.
- *
- * NOTE: This file is completely based on original board file for mach-smdkv210
- * available in Linux 3.15 and intends to provide equivalent level of hardware
- * support. Due to lack of hardware, _no_ testing has been performed.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "YIC System SMDKV210 based on S5PV210";
-	compatible = "yic,smdkv210", "samsung,s5pv210";
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x40000000>;
-	};
-
-	ethernet@18000000 {
-		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
-		interrupt-parent = <&gph1>;
-		interrupts = <1 4>;
-		local-mac-address = [00 00 de ad be ef];
-		davicom,no-eeprom;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm3_out>;
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&keypad {
-	linux,input-no-autorepeat;
-	linux,input-wakeup;
-	samsung,keypad-num-rows = <8>;
-	samsung,keypad-num-columns = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
-			<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
-			<&keypad_row6>, <&keypad_row7>,
-			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
-			<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
-			<&keypad_col6>, <&keypad_col7>;
-	status = "okay";
-
-	key_1 {
-		keypad,row = <0>;
-		keypad,column = <3>;
-		linux,code = <KEY_1>;
-	};
-
-	key_2 {
-		keypad,row = <0>;
-		keypad,column = <4>;
-		linux,code = <KEY_2>;
-	};
-
-	key_3 {
-		keypad,row = <0>;
-		keypad,column = <5>;
-		linux,code = <KEY_3>;
-	};
-
-	key_4 {
-		keypad,row = <0>;
-		keypad,column = <6>;
-		linux,code = <KEY_4>;
-	};
-
-	key_5 {
-		keypad,row = <0
-		>;
-		keypad,column = <7>;
-		linux,code = <KEY_5>;
-	};
-
-	key_6 {
-		keypad,row = <1>;
-		keypad,column = <3>;
-		linux,code = <KEY_A>;
-	};
-	key_7 {
-		keypad,row = <1>;
-		keypad,column = <4>;
-		linux,code = <KEY_B>;
-	};
-
-	key_8 {
-		keypad,row = <1>;
-		keypad,column = <5>;
-		linux,code = <KEY_C>;
-	};
-
-	key_9 {
-		keypad,row = <1>;
-		keypad,column = <6>;
-		linux,code = <KEY_D>;
-	};
-
-	key_10 {
-		keypad,row = <1>;
-		keypad,column = <7>;
-		linux,code = <KEY_E>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci1 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci3 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hsotg {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-
-		timing0: timing@0 {
-			/* 800x480@60Hz */
-			clock-frequency = <24373920>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <8>;
-			hback-porch = <13>;
-			hsync-len = <3>;
-			vback-porch = <7>;
-			vfront-porch = <5>;
-			vsync-len = <1>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-};
-
-&pwm {
-	samsung,pwm-outputs = <3>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	audio-codec@1b {
-		compatible = "wlf,wm8580";
-		reg = <0x1b>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210-torbreck.dts b/src/arm/s5pv210-torbreck.dts
deleted file mode 100644
index 622599fd2cfa..000000000000
--- a/src/arm/s5pv210-torbreck.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for Torbreck board.
- *
- * NOTE: This file is completely based on original board file for mach-torbreck
- * available in Linux 3.15 and intends to provide equivalent level of hardware
- * support. Due to lack of hardware, _no_ testing has been performed.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "aESOP Torbreck based on S5PV210";
-	compatible = "aesop,torbreck", "samsung,s5pv210";
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x20000000>;
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci1 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci3 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2s0 {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210.dtsi b/src/arm/s5pv210.dtsi
deleted file mode 100644
index 8344a0ee2b86..000000000000
--- a/src/arm/s5pv210.dtsi
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/s5pv210.h>
-#include <dt-bindings/clock/s5pv210-audss.h>
-
-/ {
-	aliases {
-		csis0 = &csis0;
-		fimc0 = &fimc0;
-		fimc1 = &fimc1;
-		fimc2 = &fimc2;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2s0 = &i2s0;
-		i2s1 = &i2s1;
-		i2s2 = &i2s2;
-		pinctrl0 = &pinctrl0;
-		spi0 = &spi0;
-		spi1 = &spi1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		external-clocks {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xxti: oscillator@0 {
-				compatible = "fixed-clock";
-				reg = <0>;
-				clock-frequency = <0>;
-				clock-output-names = "xxti";
-				#clock-cells = <0>;
-			};
-
-			xusbxti: oscillator@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				clock-output-names = "xusbxti";
-				#clock-cells = <0>;
-			};
-		};
-
-		onenand: onenand@b0000000 {
-			compatible = "samsung,s5pv210-onenand";
-			reg = <0xb0600000 0x2000>,
-				<0xb0000000 0x20000>,
-				<0xb0040000 0x20000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <31>;
-			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
-			clock-names = "bus", "onenand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		chipid@e0000000 {
-			compatible = "samsung,s5pv210-chipid";
-			reg = <0xe0000000 0x1000>;
-		};
-
-		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
-			reg = <0xe0100000 0x10000>;
-			clock-names = "xxti", "xusbxti";
-			clocks = <&xxti>, <&xusbxti>;
-			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
-		};
-
-		pinctrl0: pinctrl@e0200000 {
-			compatible = "samsung,s5pv210-pinctrl";
-			reg = <0xe0200000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <30>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <16>;
-				interrupt-parent = <&vic0>;
-			};
-		};
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "arm,amba-bus";
-			ranges;
-
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-		};
-
-		spi0: spi@e1300000 {
-			compatible = "samsung,s5pv210-spi";
-			reg = <0xe1300000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <15>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi1: spi@e1400000 {
-			compatible = "samsung,s5pv210-spi";
-			reg = <0xe1400000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <16>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		keypad: keypad@e1600000 {
-			compatible = "samsung,s5pv210-keypad";
-			reg = <0xe1600000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <25>;
-			clocks = <&clocks CLK_KEYIF>;
-			clock-names = "keypad";
-			status = "disabled";
-		};
-
-		i2c0: i2c@e1800000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0xe1800000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <14>;
-			clocks = <&clocks CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e1a00000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0xe1a00000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <19>;
-			clocks = <&clocks CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-0 = <&i2c2_bus>;
-			pinctrl-names = "default";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
-
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		i2s1: i2s@e2100000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0xe2100000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <17>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 12>, <&pdma1 13>;
-			clock-names = "iis", "i2s_opclk0";
-			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s1_bus>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@e2a00000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0xe2a00000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <18>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 14>, <&pdma1 15>;
-			clock-names = "iis", "i2s_opclk0";
-			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s2_bus>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm: pwm@e2500000 {
-			compatible = "samsung,s5pc100-pwm";
-			reg = <0xe2500000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <21>, <22>, <23>, <24>, <25>;
-			clock-names = "timers";
-			clocks = <&clocks CLK_PWM>;
-			#pwm-cells = <3>;
-		};
-
-		watchdog: watchdog@e2700000 {
-			compatible = "samsung,s3c2410-wdt";
-			reg = <0xe2700000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <26>;
-			clock-names = "watchdog";
-			clocks = <&clocks CLK_WDT>;
-		};
-
-		rtc: rtc@e2800000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0xe2800000 0x100>;
-			interrupt-parent = <&vic0>;
-			interrupts = <28>, <29>;
-			clocks = <&clocks CLK_RTC>;
-			clock-names = "rtc";
-			status = "disabled";
-		};
-
-		uart0: serial@e2900000 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900000 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <10>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,
-					<&clocks SCLK_UART0>;
-			status = "disabled";
-		};
-
-		uart1: serial@e2900400 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900400 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <11>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,
-					<&clocks SCLK_UART1>;
-			status = "disabled";
-		};
-
-		uart2: serial@e2900800 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900800 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <12>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,
-					<&clocks SCLK_UART2>;
-			status = "disabled";
-		};
-
-		uart3: serial@e2900c00 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900c00 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <13>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,
-					<&clocks SCLK_UART3>;
-			status = "disabled";
-		};
-
-		sdhci0: sdhci@eb000000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb000000 0x100000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <26>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,
-					<&clocks SCLK_MMC0>;
-			status = "disabled";
-		};
-
-		sdhci1: sdhci@eb100000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb100000 0x100000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <27>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,
-					<&clocks SCLK_MMC1>;
-			status = "disabled";
-		};
-
-		sdhci2: sdhci@eb200000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb200000 0x100000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <28>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,
-					<&clocks SCLK_MMC2>;
-			status = "disabled";
-		};
-
-		sdhci3: sdhci@eb300000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb300000 0x100000>;
-			interrupt-parent = <&vic3>;
-			interrupts = <2>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";
-			clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,
-					<&clocks SCLK_MMC3>;
-			status = "disabled";
-		};
-
-		hsotg: hsotg@ec000000 {
-			compatible = "samsung,s3c6400-hsotg";
-			reg = <0xec000000 0x20000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <24>;
-			clocks = <&clocks CLK_USB_OTG>;
-			clock-names = "otg";
-			phy-names = "usb2-phy";
-			phys = <&usbphy 0>;
-			status = "disabled";
-		};
-
-		usbphy: usbphy@ec100000 {
-			compatible = "samsung,s5pv210-usb2-phy";
-			reg = <0xec100000 0x100>;
-			samsung,pmureg-phandle = <&pmu_syscon>;
-			clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		ehci: ehci@ec200000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0xec200000 0x100>;
-			interrupts = <23>;
-			interrupt-parent = <&vic1>;
-			clocks = <&clocks CLK_USB_HOST>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
-		};
-
-		ohci: ohci@ec300000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0xec300000 0x100>;
-			interrupts = <23>;
-			clocks = <&clocks CLK_USB_HOST>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
-		};
-
-		mfc: codec@f1700000 {
-			compatible = "samsung,mfc-v5";
-			reg = <0xf1700000 0x10000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <14>;
-			clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
-			clock-names = "sclk_mfc", "mfc";
-		};
-
-		vic0: interrupt-controller@f2000000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@f2100000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2100000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic2: interrupt-controller@f2200000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2200000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic3: interrupt-controller@f2300000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2300000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fimd: fimd@f8000000 {
-			compatible = "samsung,exynos4210-fimd";
-			interrupt-parent = <&vic2>;
-			reg = <0xf8000000 0x20000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0>, <1>, <2>;
-			clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;
-			clock-names = "sclk_fimd", "fimd";
-			status = "disabled";
-		};
-
-		g2d: g2d@fa000000 {
-			compatible = "samsung,s5pv210-g2d";
-			reg = <0xfa000000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <9>;
-			clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-		};
-
-		mdma1: mdma@fa200000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xfa200000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <18>;
-			clocks = <&clocks CLK_MDMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		i2c1: i2c@fab00000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0xfab00000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <13>;
-			clocks = <&clocks CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		camera: camera {
-			compatible = "samsung,fimc", "simple-bus";
-			pinctrl-names = "default";
-			pinctrl-0 = <>;
-			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
-			clock-names = "sclk_cam0", "sclk_cam1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clock_cam: clock-controller {
-				#clock-cells = <1>;
-			};
-
-			csis0: csis@fa600000 {
-				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <29>;
-				clocks = <&clocks CLK_CSIS>,
-						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
-						"sclk_csis";
-				bus-width = <4>;
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			fimc0: fimc@fb200000 {
-				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
-				interrupts = <5>;
-				interrupt-parent = <&vic2>;
-				clocks = <&clocks CLK_FIMC0>,
-						<&clocks SCLK_FIMC0>;
-				clock-names = "fimc",
-						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,cam-if;
-			};
-
-			fimc1: fimc@fb300000 {
-				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <6>;
-				clocks = <&clocks CLK_FIMC1>,
-						<&clocks SCLK_FIMC1>;
-				clock-names = "fimc",
-						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,cam-if;
-			};
-
-			fimc2: fimc@fb400000 {
-				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <7>;
-				clocks = <&clocks CLK_FIMC2>,
-						<&clocks SCLK_FIMC2>;
-				clock-names = "fimc",
-						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,lcd-wb;
-			};
-		};
-	};
-};
-
-#include "s5pv210-pinctrl.dtsi"
diff --git a/src/arm/samsung_k3pe0e000b.dtsi b/src/arm/samsung_k3pe0e000b.dtsi
deleted file mode 100644
index 9657a5cbc3ad..000000000000
--- a/src/arm/samsung_k3pe0e000b.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Timings and Geometry for Samsung K3PE0E000B memory part
- */
-
-/ {
-	samsung_K3PE0E000B: lpddr2 {
-		compatible	= "Samsung,K3PE0E000B","jedec,lpddr2-s4";
-		density		= <4096>;
-		io-width	= <32>;
-
-		tRPab-min-tck	= <3>;
-		tRCD-min-tck	= <3>;
-		tWR-min-tck	= <3>;
-		tRASmin-min-tck	= <3>;
-		tRRD-min-tck	= <2>;
-		tWTR-min-tck	= <2>;
-		tXP-min-tck	= <2>;
-		tRTP-min-tck	= <2>;
-		tCKE-min-tck	= <3>;
-		tCKESR-min-tck	= <3>;
-		tFAW-min-tck	= <8>;
-
-		timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <533333333>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <7500>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-
-		timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <266666666>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <7500>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-	};
-};
diff --git a/src/arm/sh7372-mackerel.dts b/src/arm/sh7372-mackerel.dts
deleted file mode 100644
index a759a276c9a9..000000000000
--- a/src/arm/sh7372-mackerel.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Device Tree Source for the mackerel board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh7372.dtsi"
-
-/ {
-	model = "Mackerel (AP4 EVM 2nd)";
-	compatible = "renesas,mackerel";
-
-	chosen {
-		bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000>;
-	};
-};
diff --git a/src/arm/sh7372.dtsi b/src/arm/sh7372.dtsi
deleted file mode 100644
index 249f65be2a50..000000000000
--- a/src/arm/sh7372.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Device Tree Source for the sh7372 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "renesas,sh7372";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0x0>;
-		};
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-sh7372";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
diff --git a/src/arm/sh73a0-kzm9g-reference.dts b/src/arm/sh73a0-kzm9g-reference.dts
deleted file mode 100644
index 18662aec2ec4..000000000000
--- a/src/arm/sh73a0-kzm9g-reference.dts
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on sh73a0-kzm9g.dts
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
-
-	aliases {
-		serial4 = &scifa4;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd_dvfs>;
-			operating-points = <
-				/* kHz  uV */
-				1196000 1315000
-				 598000 1175000
-				 398667 1065000
-			>;
-			voltage-tolerance = <1>; /* 1% */
-		};
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vmmc_sdhi0: regulator@2 {
-	        compatible = "regulator-fixed";
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vmmc_sdhi2: regulator@3 {
-	        compatible = "regulator-fixed";
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lan9220@10000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x10000000 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		smsc,irq-push-pull;
-		smsc,save-mac-address;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-		};
-		led2 {
-			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
-		};
-		led3 {
-			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
-		};
-		led4 {
-			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		back-key {
-			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW3";
-		};
-
-		right-key {
-			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RIGHT>;
-			label = "SW2-R";
-		};
-
-		left-key {
-			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LEFT>;
-			label = "SW2-L";
-		};
-
-		enter-key {
-			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_ENTER>;
-			label = "SW2-P";
-		};
-
-		up-key {
-			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			label = "SW2-U";
-		};
-
-		down-key {
-			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			label = "SW2-D";
-		};
-
-		home-key {
-			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW1";
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "left_j";
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-		};
-		simple-audio-card,codec {
-			sound-dai = <&ak4648>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <11289600>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	as3711@40 {
-		compatible = "ams,as3711";
-		reg = <0x40>;
-
-		regulators {
-			vdd_dvfs: sd1 {
-				regulator-name = "1.315V CPU";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd2 {
-				regulator-name = "1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd4 {
-				regulator-name = "1.215V";
-				regulator-min-microvolt = <1215000>;
-				regulator-max-microvolt = <1235000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo2 {
-				regulator-name = "2.8V CPU";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo3 {
-				regulator-name = "3.0V CPU";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo4 {
-				regulator-name = "2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo5 {
-				regulator-name = "2.8V #2";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo7 {
-				regulator-name = "1.15V CPU";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo8 {
-				regulator-name = "1.15V CPU #2";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	ak4648: ak4648@0x12 {
-		#sound-dai-cells = <0>;
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-	};
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	pcf8575: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		interrupt-parent = <&irqpin2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&mmcif {
-	pinctrl-0 = <&mmcif_pins>;
-	pinctrl-names = "default";
-
-	bus-width = <8>;
-	vmmc-supply = <&reg_1p8v>;
-	status = "okay";
-};
-
-&pfc {
-	i2c3_pins: i2c3 {
-		renesas,groups = "i2c3_1";
-		renesas,function = "i2c3";
-	};
-
-	mmcif_pins: mmc {
-		mux {
-			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
-			renesas,function = "mmc0";
-		};
-		cfg {
-			renesas,groups = "mmc0_data8_0";
-			renesas,pins = "PORT279";
-			bias-pull-up;
-		};
-	};
-
-	scifa4_pins: serial4 {
-		renesas,groups = "scifa4_data", "scifa4_ctrl";
-		renesas,function = "scifa4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
-				 "fsia_data_in", "fsia_data_out";
-		renesas,function = "fsia";
-	};
-};
-
-&scifa4 {
-	pinctrl-0 = <&scifa4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi0>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi2>;
-	bus-width = <4>;
-	broken-cd;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/src/arm/sh73a0-kzm9g.dts b/src/arm/sh73a0-kzm9g.dts
deleted file mode 100644
index 27c5f426d172..000000000000
--- a/src/arm/sh73a0-kzm9g.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-
-/ {
-	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g", "renesas,sh73a0";
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
-	};
-};
diff --git a/src/arm/sh73a0.dtsi b/src/arm/sh73a0.dtsi
deleted file mode 100644
index 910b79079d5a..000000000000
--- a/src/arm/sh73a0.dtsi
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Device Tree Source for the SH73A0 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,sh73a0";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@f0001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xf0001000 0x1000>,
-		      <0xf0000100 0x100>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqpin0: irqpin@e6900000 {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900000 4>,
-			<0xe6900010 4>,
-			<0xe6900020 1>,
-			<0xe6900040 1>,
-			<0xe6900060 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
-			      0 2 IRQ_TYPE_LEVEL_HIGH
-			      0 3 IRQ_TYPE_LEVEL_HIGH
-			      0 4 IRQ_TYPE_LEVEL_HIGH
-			      0 5 IRQ_TYPE_LEVEL_HIGH
-			      0 6 IRQ_TYPE_LEVEL_HIGH
-			      0 7 IRQ_TYPE_LEVEL_HIGH
-			      0 8 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqpin1: irqpin@e6900004 {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900004 4>,
-			<0xe6900014 4>,
-			<0xe6900024 1>,
-			<0xe6900044 1>,
-			<0xe6900064 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
-			      0 10 IRQ_TYPE_LEVEL_HIGH
-			      0 11 IRQ_TYPE_LEVEL_HIGH
-			      0 12 IRQ_TYPE_LEVEL_HIGH
-			      0 13 IRQ_TYPE_LEVEL_HIGH
-			      0 14 IRQ_TYPE_LEVEL_HIGH
-			      0 15 IRQ_TYPE_LEVEL_HIGH
-			      0 16 IRQ_TYPE_LEVEL_HIGH>;
-		control-parent;
-	};
-
-	irqpin2: irqpin@e6900008 {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900008 4>,
-			<0xe6900018 4>,
-			<0xe6900028 1>,
-			<0xe6900048 1>,
-			<0xe6900068 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
-			      0 18 IRQ_TYPE_LEVEL_HIGH
-			      0 19 IRQ_TYPE_LEVEL_HIGH
-			      0 20 IRQ_TYPE_LEVEL_HIGH
-			      0 21 IRQ_TYPE_LEVEL_HIGH
-			      0 22 IRQ_TYPE_LEVEL_HIGH
-			      0 23 IRQ_TYPE_LEVEL_HIGH
-			      0 24 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqpin3: irqpin@e690000c {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe690000c 4>,
-			<0xe690001c 4>,
-			<0xe690002c 1>,
-			<0xe690004c 1>,
-			<0xe690006c 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
-			      0 26 IRQ_TYPE_LEVEL_HIGH
-			      0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH
-			      0 31 IRQ_TYPE_LEVEL_HIGH
-			      0 32 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	i2c0: i2c@e6820000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6820000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
-			      0 168 IRQ_TYPE_LEVEL_HIGH
-			      0 169 IRQ_TYPE_LEVEL_HIGH
-			      0 170 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6822000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6822000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
-			      0 52 IRQ_TYPE_LEVEL_HIGH
-			      0 53 IRQ_TYPE_LEVEL_HIGH
-			      0 54 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6824000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6824000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
-			      0 172 IRQ_TYPE_LEVEL_HIGH
-			      0 173 IRQ_TYPE_LEVEL_HIGH
-			      0 174 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6826000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6826000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
-			      0 184 IRQ_TYPE_LEVEL_HIGH
-			      0 185 IRQ_TYPE_LEVEL_HIGH
-			      0 186 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@e6828000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6828000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
-			      0 188 IRQ_TYPE_LEVEL_HIGH
-			      0 189 IRQ_TYPE_LEVEL_HIGH
-			      0 190 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	mmcif: mmc@e6bd0000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0xe6bd0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
-			      0 141 IRQ_TYPE_LEVEL_HIGH>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-sh73a0";
-		reg = <0xee100000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
-			      0 84 IRQ_TYPE_LEVEL_HIGH
-			      0 85 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
-	sdhi1: sd@ee120000 {
-		compatible = "renesas,sdhi-sh73a0";
-		reg = <0xee120000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
-			      0 89 IRQ_TYPE_LEVEL_HIGH>;
-		toshiba,mmc-wrprotect-disable;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee140000 {
-		compatible = "renesas,sdhi-sh73a0";
-		reg = <0xee140000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
-			      0 105 IRQ_TYPE_LEVEL_HIGH>;
-		toshiba,mmc-wrprotect-disable;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c40000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c50000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c60000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c70000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa4: serial@e6c80000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c80000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa5: serial@e6cb0000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6cb0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa6: serial@e6cc0000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6cc0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa7: serial@e6cd0000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6cd0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb8: serial@e6c30000 {
-		compatible = "renesas,scifb-sh73a0", "renesas,scifb";
-		reg = <0xe6c30000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-sh73a0";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-	sh_fsi2: sound@ec230000 {
-		#sound-dai-cells = <1>;
-		compatible = "renesas,sh_fsi2";
-		reg = <0xec230000 0x400>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 146 0x4>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/socfpga.dtsi b/src/arm/socfpga.dtsi
deleted file mode 100644
index 4d77ad690ed5..000000000000
--- a/src/arm/socfpga.dtsi
+++ /dev/null
@@ -1,744 +0,0 @@
-/*
- *  Copyright (C) 2012 Altera <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/reset/altr,rst-mgr.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		timer0 = &timer0;
-		timer1 = &timer1;
-		timer2 = &timer2;
-		timer3 = &timer3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	intc: intc@fffed000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfffed000 0x1000>,
-		      <0xfffec100 0x100>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		device_type = "soc";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma: pdma@ffe01000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xffe01000 0x1000>;
-				interrupts = <0 104 4>,
-					     <0 105 4>,
-					     <0 106 4>,
-					     <0 107 4>,
-					     <0 108 4>,
-					     <0 109 4>,
-					     <0 110 4>,
-					     <0 111 4>;
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-				clocks = <&l4_main_clk>;
-				clock-names = "apb_pclk";
-			};
-		};
-
-		can0: can@ffc00000 {
-			compatible = "bosch,d_can";
-			reg = <0xffc00000 0x1000>;
-			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
-			clocks = <&can0_clk>;
-			status = "disabled";
-		};
-
-		can1: can@ffc01000 {
-			compatible = "bosch,d_can";
-			reg = <0xffc01000 0x1000>;
-			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
-			clocks = <&can1_clk>;
-			status = "disabled";
-		};
-
-		clkmgr@ffd04000 {
-				compatible = "altr,clk-mgr";
-				reg = <0xffd04000 0x1000>;
-
-				clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					osc1: osc1 {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					osc2: osc2 {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					f2s_periph_ref_clk: f2s_periph_ref_clk {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					f2s_sdram_ref_clk: f2s_sdram_ref_clk {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					main_pll: main_pll {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>;
-						reg = <0x40>;
-
-						mpuclk: mpuclk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							div-reg = <0xe0 0 9>;
-							reg = <0x48>;
-						};
-
-						mainclk: mainclk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							div-reg = <0xe4 0 9>;
-							reg = <0x4C>;
-						};
-
-						dbg_base_clk: dbg_base_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							div-reg = <0xe8 0 9>;
-							reg = <0x50>;
-						};
-
-						main_qspi_clk: main_qspi_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							reg = <0x54>;
-						};
-
-						main_nand_sdmmc_clk: main_nand_sdmmc_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							reg = <0x58>;
-						};
-
-						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							reg = <0x5C>;
-						};
-					};
-
-					periph_pll: periph_pll {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
-						reg = <0x80>;
-
-						emac0_clk: emac0_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x88>;
-						};
-
-						emac1_clk: emac1_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x8C>;
-						};
-
-						per_qspi_clk: per_qsi_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x90>;
-						};
-
-						per_nand_mmc_clk: per_nand_mmc_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x94>;
-						};
-
-						per_base_clk: per_base_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x98>;
-						};
-
-						h2f_usr1_clk: h2f_usr1_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x9C>;
-						};
-					};
-
-					sdram_pll: sdram_pll {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
-						reg = <0xC0>;
-
-						ddr_dqs_clk: ddr_dqs_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xC8>;
-						};
-
-						ddr_2x_dqs_clk: ddr_2x_dqs_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xCC>;
-						};
-
-						ddr_dq_clk: ddr_dq_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xD0>;
-						};
-
-						h2f_usr2_clk: h2f_usr2_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xD4>;
-						};
-					};
-
-					mpu_periph_clk: mpu_periph_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-perip-clk";
-						clocks = <&mpuclk>;
-						fixed-divider = <4>;
-					};
-
-					mpu_l2_ram_clk: mpu_l2_ram_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-perip-clk";
-						clocks = <&mpuclk>;
-						fixed-divider = <2>;
-					};
-
-					l4_main_clk: l4_main_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
-						clk-gate = <0x60 0>;
-					};
-
-					l3_main_clk: l3_main_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-perip-clk";
-						clocks = <&mainclk>;
-						fixed-divider = <1>;
-					};
-
-					l3_mp_clk: l3_mp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
-						div-reg = <0x64 0 2>;
-						clk-gate = <0x60 1>;
-					};
-
-					l3_sp_clk: l3_sp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
-						div-reg = <0x64 2 2>;
-					};
-
-					l4_mp_clk: l4_mp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>, <&per_base_clk>;
-						div-reg = <0x64 4 3>;
-						clk-gate = <0x60 2>;
-					};
-
-					l4_sp_clk: l4_sp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>, <&per_base_clk>;
-						div-reg = <0x64 7 3>;
-						clk-gate = <0x60 3>;
-					};
-
-					dbg_at_clk: dbg_at_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						div-reg = <0x68 0 2>;
-						clk-gate = <0x60 4>;
-					};
-
-					dbg_clk: dbg_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						div-reg = <0x68 2 2>;
-						clk-gate = <0x60 5>;
-					};
-
-					dbg_trace_clk: dbg_trace_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						div-reg = <0x6C 0 3>;
-						clk-gate = <0x60 6>;
-					};
-
-					dbg_timer_clk: dbg_timer_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						clk-gate = <0x60 7>;
-					};
-
-					cfg_clk: cfg_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&cfg_h2f_usr0_clk>;
-						clk-gate = <0x60 8>;
-					};
-
-					h2f_user0_clk: h2f_user0_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&cfg_h2f_usr0_clk>;
-						clk-gate = <0x60 9>;
-					};
-
-					emac_0_clk: emac_0_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&emac0_clk>;
-						clk-gate = <0xa0 0>;
-					};
-
-					emac_1_clk: emac_1_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&emac1_clk>;
-						clk-gate = <0xa0 1>;
-					};
-
-					usb_mp_clk: usb_mp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 2>;
-						div-reg = <0xa4 0 3>;
-					};
-
-					spi_m_clk: spi_m_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 3>;
-						div-reg = <0xa4 3 3>;
-					};
-
-					can0_clk: can0_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 4>;
-						div-reg = <0xa4 6 3>;
-					};
-
-					can1_clk: can1_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 5>;
-						div-reg = <0xa4 9 3>;
-					};
-
-					gpio_db_clk: gpio_db_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 6>;
-						div-reg = <0xa8 0 24>;
-					};
-
-					h2f_user1_clk: h2f_user1_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&h2f_usr1_clk>;
-						clk-gate = <0xa0 7>;
-					};
-
-					sdmmc_clk: sdmmc_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
-					};
-
-					nand_x_clk: nand_x_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-						clk-gate = <0xa0 9>;
-					};
-
-					nand_clk: nand_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-						clk-gate = <0xa0 10>;
-						fixed-divider = <4>;
-					};
-
-					qspi_clk: qspi_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
-						clk-gate = <0xa0 11>;
-					};
-				};
-			};
-
-		gmac0: ethernet@ff700000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
-			reg = <0xff700000 0x2000>;
-			interrupts = <0 115 4>;
-			interrupt-names = "macirq";
-			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac0_clk>;
-			clock-names = "stmmaceth";
-			resets = <&rst EMAC0_RESET>;
-			reset-names = "stmmaceth";
-			snps,multicast-filter-bins = <256>;
-			snps,perfect-filter-entries = <128>;
-			status = "disabled";
-		};
-
-		gmac1: ethernet@ff702000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x60 2>;
-			reg = <0xff702000 0x2000>;
-			interrupts = <0 120 4>;
-			interrupt-names = "macirq";
-			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac1_clk>;
-			clock-names = "stmmaceth";
-			resets = <&rst EMAC1_RESET>;
-			reset-names = "stmmaceth";
-			snps,multicast-filter-bins = <256>;
-			snps,perfect-filter-entries = <128>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@ffc04000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc04000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 158 0x4>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@ffc05000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc05000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 159 0x4>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@ffc06000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc06000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 160 0x4>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@ffc07000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc07000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 161 0x4>;
-			status = "disabled";
-		};
-
-		gpio@ff708000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0xff708000 0x1000>;
-			clocks = <&per_base_clk>;
-			status = "disabled";
-
-			gpio0: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <29>;
-				reg = <0>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 164 4>;
-			};
-		};
-
-		gpio@ff709000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0xff709000 0x1000>;
-			clocks = <&per_base_clk>;
-			status = "disabled";
-
-			gpio1: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <29>;
-				reg = <0>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 165 4>;
-			};
-		};
-
-		gpio@ff70a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0xff70a000 0x1000>;
-			clocks = <&per_base_clk>;
-			status = "disabled";
-
-			gpio2: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <27>;
-				reg = <0>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 166 4>;
-			};
-		};
-
-		L2: l2-cache@fffef000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xfffef000 0x1000>;
-			interrupts = <0 38 0x04>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <2 1 1>;
-		};
-
-		mmc: dwmmc0@ff704000 {
-			compatible = "altr,socfpga-dw-mshc";
-			reg = <0xff704000 0x1000>;
-			interrupts = <0 139 4>;
-			fifo-depth = <0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
-			clock-names = "biu", "ciu";
-		};
-
-		/* Local timer */
-		timer@fffec600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xfffec600 0x100>;
-			interrupts = <1 13 0xf04>;
-			clocks = <&mpu_periph_clk>;
-		};
-
-		timer0: timer0@ffc08000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 167 4>;
-			reg = <0xffc08000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			clock-names = "timer";
-		};
-
-		timer1: timer1@ffc09000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 168 4>;
-			reg = <0xffc09000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			clock-names = "timer";
-		};
-
-		timer2: timer2@ffd00000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 169 4>;
-			reg = <0xffd00000 0x1000>;
-			clocks = <&osc1>;
-			clock-names = "timer";
-		};
-
-		timer3: timer3@ffd01000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 170 4>;
-			reg = <0xffd01000 0x1000>;
-			clocks = <&osc1>;
-			clock-names = "timer";
-		};
-
-		uart0: serial0@ffc02000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0xffc02000 0x1000>;
-			interrupts = <0 162 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&l4_sp_clk>;
-		};
-
-		uart1: serial1@ffc03000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0xffc03000 0x1000>;
-			interrupts = <0 163 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&l4_sp_clk>;
-		};
-
-		rst: rstmgr@ffd05000 {
-			#reset-cells = <1>;
-			compatible = "altr,rst-mgr";
-			reg = <0xffd05000 0x1000>;
-		};
-
-		usbphy0: usbphy@0 {
-			#phy-cells = <0>;
-			compatible = "usb-nop-xceiv";
-			status = "okay";
-		};
-
-		usb0: usb@ffb00000 {
-			compatible = "snps,dwc2";
-			reg = <0xffb00000 0xffff>;
-			interrupts = <0 125 4>;
-			clocks = <&usb_mp_clk>;
-			clock-names = "otg";
-			phys = <&usbphy0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		usb1: usb@ffb40000 {
-			compatible = "snps,dwc2";
-			reg = <0xffb40000 0xffff>;
-			interrupts = <0 128 4>;
-			clocks = <&usb_mp_clk>;
-			clock-names = "otg";
-			phys = <&usbphy0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		watchdog0: watchdog@ffd02000 {
-			compatible = "snps,dw-wdt";
-			reg = <0xffd02000 0x1000>;
-			interrupts = <0 171 4>;
-			clocks = <&osc1>;
-			status = "disabled";
-		};
-
-		watchdog1: watchdog@ffd03000 {
-			compatible = "snps,dw-wdt";
-			reg = <0xffd03000 0x1000>;
-			interrupts = <0 172 4>;
-			clocks = <&osc1>;
-			status = "disabled";
-		};
-
-		sysmgr: sysmgr@ffd08000 {
-			compatible = "altr,sys-mgr", "syscon";
-			reg = <0xffd08000 0x4000>;
-		};
-	};
-};
diff --git a/src/arm/socfpga_arria5.dtsi b/src/arm/socfpga_arria5.dtsi
deleted file mode 100644
index 12d1c2ccaf5b..000000000000
--- a/src/arm/socfpga_arria5.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga.dtsi"
-
-/ {
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <25000000>;
-				};
-			};
-		};
-
-		dwmmc0@ff704000 {
-			num-slots = <1>;
-			supports-highspeed;
-			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
-		};
-
-		sysmgr@ffd08000 {
-			cpu1-start-addr = <0xffd080c4>;
-		};
-	};
-};
diff --git a/src/arm/socfpga_arria5_socdk.dts b/src/arm/socfpga_arria5_socdk.dts
deleted file mode 100644
index d532d171e391..000000000000
--- a/src/arm/socfpga_arria5_socdk.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_arria5.dtsi"
-
-/ {
-	model = "Altera SOCFPGA Arria V SoC Development Kit";
-	compatible = "altr,socfpga-arria5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		* to be added to the gmac1 device tree blob.
-		*/
-		ethernet0 = &gmac1;
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c32";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_cyclone5.dtsi b/src/arm/socfpga_cyclone5.dtsi
deleted file mode 100644
index bf511828729f..000000000000
--- a/src/arm/socfpga_cyclone5.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga.dtsi"
-
-/ {
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <25000000>;
-				};
-			};
-		};
-
-		dwmmc0@ff704000 {
-			num-slots = <1>;
-			supports-highspeed;
-			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
-		};
-
-		ethernet@ff702000 {
-			phy-mode = "rgmii";
-			phy-addr = <0xffffffff>; /* probe for phy addr */
-			status = "okay";
-		};
-
-		sysmgr@ffd08000 {
-			cpu1-start-addr = <0xffd080c4>;
-		};
-	};
-};
diff --git a/src/arm/socfpga_cyclone5_socdk.dts b/src/arm/socfpga_cyclone5_socdk.dts
deleted file mode 100644
index 45de1514af0a..000000000000
--- a/src/arm/socfpga_cyclone5_socdk.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_cyclone5.dtsi"
-
-/ {
-	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c32";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_cyclone5_sockit.dts b/src/arm/socfpga_cyclone5_sockit.dts
deleted file mode 100644
index d26f155f5fd9..000000000000
--- a/src/arm/socfpga_cyclone5_sockit.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_cyclone5.dtsi"
-
-/ {
-	model = "Terasic SoCkit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_cyclone5_socrates.dts b/src/arm/socfpga_cyclone5_socrates.dts
deleted file mode 100644
index a1814b457450..000000000000
--- a/src/arm/socfpga_cyclone5_socrates.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_cyclone5.dtsi"
-
-/ {
-	model = "EBV SOCrates";
-	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-};
-
-&gmac1 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	rtc: rtc@68 {
-		compatible = "stm,m41t82";
-		reg = <0x68>;
-	};
-};
-
-&mmc {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_vt.dts b/src/arm/socfpga_vt.dts
deleted file mode 100644
index 09792b411110..000000000000
--- a/src/arm/socfpga_vt.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga.dtsi"
-
-/ {
-	model = "Altera SOCFPGA VT";
-	compatible = "altr,socfpga-vt", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <10000000>;
-				};
-			};
-		};
-
-		dwmmc0@ff704000 {
-			num-slots = <1>;
-			supports-highspeed;
-			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
-		};
-
-		ethernet@ff700000 {
-			phy-mode = "gmii";
-			status = "okay";
-		};
-
-		timer0@ffc08000 {
-			clock-frequency = <7000000>;
-		};
-
-		timer1@ffc09000 {
-			clock-frequency = <7000000>;
-		};
-
-		timer2@ffd00000 {
-			clock-frequency = <7000000>;
-		};
-
-		timer3@ffd01000 {
-			clock-frequency = <7000000>;
-		};
-
-		serial0@ffc02000 {
-			clock-frequency = <7372800>;
-		};
-
-		serial1@ffc03000 {
-			clock-frequency = <7372800>;
-		};
-
-		sysmgr@ffd08000 {
-			cpu1-start-addr = <0xffd08010>;
-		};
-	};
-};
-
-&gmac0 {
-	status = "okay";
-	phy-mode = "gmii";
-};
diff --git a/src/arm/spear1310-evb.dts b/src/arm/spear1310-evb.dts
deleted file mode 100644
index d42c84b1df8d..000000000000
--- a/src/arm/spear1310-evb.dts
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * DTS file for SPEAr1310 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear1310.dtsi"
-
-/ {
-	model = "ST SPEAr1310 Evaluation Board";
-	compatible = "st,spear1310-evb", "st,spear1310";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@e0700000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				i2s0 {
-					st,pins = "i2s0_grp";
-					st,function = "i2s0";
-				};
-				i2s1 {
-					st,pins = "i2s1_grp";
-					st,function = "i2s1";
-				};
-				gpio {
-					st,pins = "arm_gpio_grp";
-					st,function = "arm_gpio";
-				};
-				clcd {
-					st,pins = "clcd_grp" , "clcd_high_res";
-					st,function = "clcd";
-				};
-				eth {
-					st,pins = "gmii_grp";
-					st,function = "gmii";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				kbd {
-					st,pins = "keyboard_6x6_grp";
-					st,function = "keyboard";
-				};
-				sdhci {
-					st,pins = "sdhci_grp";
-					st,function = "sdhci";
-				};
-				smi-pmx {
-					st,pins = "smi_2_chips_grp";
-					st,function = "smi";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				rs485 {
-					st,pins = "rs485_0_1_tdm_0_1_grp";
-					st,function = "rs485_0_1_tdm_0_1";
-				};
-				i2c1_2 {
-					st,pins = "i2c_1_2_grp";
-					st,function = "i2c_1_2";
-				};
-				smii {
-					st,pins = "smii_0_1_2_grp";
-					st,function = "smii_0_1_2";
-				};
-				nand {
-					st,pins = "nand_8bit_grp",
-						"nand_16bit_grp";
-					st,function = "nand";
-				};
-				sata {
-					st,pins = "sata0_grp";
-					st,function = "sata";
-				};
-				pcie {
-					st,pins = "pcie1_grp", "pcie2_grp";
-					st,function = "pci_express";
-				};
-			};
-		};
-
-		ahci@b1000000 {
-			status = "okay";
-		};
-
-		miphy@eb800000 {
-			status = "okay";
-		};
-
-		cf@b2800000 {
-			status = "okay";
-		};
-
-		dma@ea800000 {
-			status = "okay";
-		};
-
-		dma@eb000000 {
-			status = "okay";
-		};
-
-		fsmc: flash@b0000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "xloader";
-				reg = <0x0 0x80000>;
-			};
-			partition@80000 {
-				label = "u-boot";
-				reg = <0x80000 0x140000>;
-			};
-			partition@1C0000 {
-				label = "environment";
-				reg = <0x1C0000 0x40000>;
-			};
-			partition@200000 {
-				label = "dtb";
-				reg = <0x200000 0x40000>;
-			};
-			partition@240000 {
-				label = "linux";
-				reg = <0x240000 0xC00000>;
-			};
-			partition@E40000 {
-				label = "rootfs";
-				reg = <0xE40000 0x0>;
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			button@1 {
-				label = "wakeup";
-				linux,code = <0x100>;
-				gpios = <&gpio0 7 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-		};
-
-		gmac0: eth@e2000000 {
-			phy-mode = "gmii";
-			status = "okay";
-		};
-
-		sdhci@b3000000 {
-			status = "okay";
-		};
-
-		smi: flash@ea000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@e6000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xe6000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		ehci@e4800000 {
-			status = "okay";
-		};
-
-		ehci@e5800000 {
-			status = "okay";
-		};
-
-		ohci@e4000000 {
-			status = "okay";
-		};
-
-		ohci@e5000000 {
-			status = "okay";
-		};
-
-		apb {
-			adc@e0080000 {
-				status = "okay";
-			};
-
-			gpio0: gpio@e0600000 {
-			       status = "okay";
-			};
-
-			gpio1: gpio@e0680000 {
-			       status = "okay";
-			};
-
-			gpio@d8400000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@e0280000 {
-			       status = "okay";
-			};
-
-			kbd@e0300000 {
-				linux,keymap = < 0x00000001
-						 0x00010002
-						 0x00020003
-						 0x00030004
-						 0x00040005
-						 0x00050006
-						 0x00060007
-						 0x00070008
-						 0x00080009
-						 0x0100000a
-						 0x0101000c
-						 0x0102000d
-						 0x0103000e
-						 0x0104000f
-						 0x01050010
-						 0x01060011
-						 0x01070012
-						 0x01080013
-						 0x02000014
-						 0x02010015
-						 0x02020016
-						 0x02030017
-						 0x02040018
-						 0x02050019
-						 0x0206001a
-						 0x0207001b
-						 0x0208001c
-						 0x0300001d
-						 0x0301001e
-						 0x0302001f
-						 0x03030020
-						 0x03040021
-						 0x03050022
-						 0x03060023
-						 0x03070024
-						 0x03080025
-						 0x04000026
-						 0x04010027
-						 0x04020028
-						 0x04030029
-						 0x0404002a
-						 0x0405002b
-						 0x0406002c
-						 0x0407002d
-						 0x0408002e
-						 0x0500002f
-						 0x05010030
-						 0x05020031
-						 0x05030032
-						 0x05040033
-						 0x05050034
-						 0x05060035
-						 0x05070036
-						 0x05080037
-						 0x06000038
-						 0x06010039
-						 0x0602003a
-						 0x0603003b
-						 0x0604003c
-						 0x0605003d
-						 0x0606003e
-						 0x0607003f
-						 0x06080040
-						 0x07000041
-						 0x07010042
-						 0x07020043
-						 0x07030044
-						 0x07040045
-						 0x07050046
-						 0x07060047
-						 0x07070048
-						 0x07080049
-						 0x0800004a
-						 0x0801004b
-						 0x0802004c
-						 0x0803004d
-						 0x0804004e
-						 0x0805004f
-						 0x08060050
-						 0x08070051
-						 0x08080052 >;
-			       autorepeat;
-			       st,mode = <0>;
-			       suspended_rate = <2000000>;
-			       status = "okay";
-			};
-
-			rtc@e0580000 {
-			       status = "okay";
-			};
-
-			serial@e0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			spi0: spi@e0100000 {
-				status = "okay";
-				num-cs = <3>;
-				cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
-
-				stmpe610@0 {
-					compatible = "st,stmpe610";
-					reg = <0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					spi-max-frequency = <1000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x7>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-					interrupts = <6 0x4>;
-					interrupt-parent = <&gpio1>;
-					irq-trigger = <0x2>;
-
-					stmpe_touchscreen {
-						compatible = "st,stmpe-ts";
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <2>;
-						ts,settling = <2>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
-					};
-				};
-
-				m25p80@1 {
-					compatible = "st,m25p80";
-					reg = <1>;
-					spi-max-frequency = <12000000>;
-					spi-cpol;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-			};
-
-			wdt@ec800620 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear1310.dtsi b/src/arm/spear1310.dtsi
deleted file mode 100644
index fa5f2bb5f106..000000000000
--- a/src/arm/spear1310.dtsi
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * DTS file for all SPEAr1310 SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear13xx.dtsi"
-
-/ {
-	compatible = "st,spear1310";
-
-	ahb {
-		spics: spics@e0700000{
-			compatible = "st,spear-spics-gpio";
-			reg = <0xe0700000 0x1000>;
-			st-spics,peripcfg-reg = <0x3b0>;
-			st-spics,sw-enable-bit = <12>;
-			st-spics,cs-value-bit = <11>;
-			st-spics,cs-enable-mask = <3>;
-			st-spics,cs-enable-shift = <8>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		miphy0: miphy@eb800000 {
-			compatible = "st,spear1310-miphy";
-			reg = <0xeb800000 0x4000>;
-			misc = <&misc>;
-			phy-id = <0>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		miphy1: miphy@eb804000 {
-			compatible = "st,spear1310-miphy";
-			reg = <0xeb804000 0x4000>;
-			misc = <&misc>;
-			phy-id = <1>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		miphy2: miphy@eb808000 {
-			compatible = "st,spear1310-miphy";
-			reg = <0xeb808000 0x4000>;
-			misc = <&misc>;
-			phy-id = <2>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		ahci0: ahci@b1000000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb1000000 0x10000>;
-			interrupts = <0 68 0x4>;
-			phys = <&miphy0 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		ahci1: ahci@b1800000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb1800000 0x10000>;
-			interrupts = <0 69 0x4>;
-			phys = <&miphy1 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		ahci2: ahci@b4000000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb4000000 0x10000>;
-			interrupts = <0 70 0x4>;
-			phys = <&miphy2 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		pcie0: pcie@b1000000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb1000000 0x4000>;
-			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy0 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		pcie1: pcie@b1800000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb1800000 0x4000>;
-			interrupts = <0 69 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 69 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy1 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0  0x90020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		pcie2: pcie@b4000000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb4000000 0x4000>;
-			interrupts = <0 70 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 70 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy2 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0	 0xc0020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		gmac1: eth@5c400000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c400000 0x8000>;
-			interrupts = <0 95 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		gmac2: eth@5c500000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c500000 0x8000>;
-			interrupts = <0 96 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		gmac3: eth@5c600000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c600000 0x8000>;
-			interrupts = <0 97 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "rmii";
-			status = "disabled";
-		};
-
-		gmac4: eth@5c700000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c700000 0x8000>;
-			interrupts = <0 98 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "rgmii";
-			status = "disabled";
-		};
-
-		pinmux: pinmux@e0700000 {
-			compatible = "st,spear1310-pinmux";
-			reg = <0xe0700000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		apb {
-			i2c1: i2c@5cd00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5cd00000 0x1000>;
-				interrupts = <0 87 0x4>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@5ce00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5ce00000 0x1000>;
-				interrupts = <0 88 0x4>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@5cf00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5cf00000 0x1000>;
-				interrupts = <0 89 0x4>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@5d000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d000000 0x1000>;
-				interrupts = <0 90 0x4>;
-				status = "disabled";
-			};
-
-			i2c5: i2c@5d100000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d100000 0x1000>;
-				interrupts = <0 91 0x4>;
-				status = "disabled";
-			};
-
-			i2c6: i2c@5d200000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d200000 0x1000>;
-				interrupts = <0 92 0x4>;
-				status = "disabled";
-			};
-
-			i2c7: i2c@5d300000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d300000 0x1000>;
-				interrupts = <0 93 0x4>;
-				status = "disabled";
-			};
-
-			spi1: spi@5d400000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x5d400000 0x1000>;
-				interrupts = <0 99 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			serial@5c800000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5c800000 0x1000>;
-				interrupts = <0 82 0x4>;
-				status = "disabled";
-			};
-
-			serial@5c900000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5c900000 0x1000>;
-				interrupts = <0 83 0x4>;
-				status = "disabled";
-			};
-
-			serial@5ca00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5ca00000 0x1000>;
-				interrupts = <0 84 0x4>;
-				status = "disabled";
-			};
-
-			serial@5cb00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5cb00000 0x1000>;
-				interrupts = <0 85 0x4>;
-				status = "disabled";
-			};
-
-			serial@5cc00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5cc00000 0x1000>;
-				interrupts = <0 86 0x4>;
-				status = "disabled";
-			};
-
-			thermal@e07008c4 {
-				st,thermal-flags = <0x7000>;
-			};
-
-			gpiopinctrl: gpio@d8400000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xd8400000 0x1000>;
-				interrupts = <0 100 0x4>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 246>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <246>;
-				st-plgpio,enb-reg = <0xd0>;
-				st-plgpio,wdata-reg = <0x90>;
-				st-plgpio,dir-reg = <0xb0>;
-				st-plgpio,ie-reg = <0x30>;
-				st-plgpio,rdata-reg = <0x70>;
-				st-plgpio,mis-reg = <0x10>;
-				st-plgpio,eit-reg = <0x50>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear1340-evb.dts b/src/arm/spear1340-evb.dts
deleted file mode 100644
index b23e05ed1d60..000000000000
--- a/src/arm/spear1340-evb.dts
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * DTS file for SPEAr1340 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear1340.dtsi"
-
-/ {
-	model = "ST SPEAr1340 Evaluation Board";
-	compatible = "st,spear1340-evb", "st,spear1340";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@e0700000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pads_as_gpio {
-					st,pins = "pads_as_gpio_grp";
-					st,function = "pads_as_gpio";
-				};
-				fsmc {
-					st,pins = "fsmc_8bit_grp";
-					st,function = "fsmc";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				i2c1 {
-					st,pins = "i2c1_grp";
-					st,function = "i2c1";
-				};
-				spdif-in {
-					st,pins = "spdif_in_grp";
-					st,function = "spdif_in";
-				};
-				spdif-out {
-					st,pins = "spdif_out_grp";
-					st,function = "spdif_out";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp", "ssp0_cs1_grp", "ssp0_cs2_grp", "ssp0_cs3_grp";
-					st,function = "ssp0";
-				};
-				smi-pmx {
-					st,pins = "smi_grp";
-					st,function = "smi";
-				};
-				i2s {
-					st,pins = "i2s_in_grp", "i2s_out_grp";
-					st,function = "i2s";
-				};
-				gmac {
-					st,pins = "gmii_grp", "rgmii_grp";
-					st,function = "gmac";
-				};
-				cam0 {
-					st,pins = "cam0_grp";
-					st,function = "cam0";
-				};
-				cam1 {
-					st,pins = "cam1_grp";
-					st,function = "cam1";
-				};
-				cam2 {
-					st,pins = "cam2_grp";
-					st,function = "cam2";
-				};
-				cam3 {
-					st,pins = "cam3_grp";
-					st,function = "cam3";
-				};
-				cec0 {
-					st,pins = "cec0_grp";
-					st,function = "cec0";
-				};
-				cec1 {
-					st,pins = "cec1_grp";
-					st,function = "cec1";
-				};
-				sdhci {
-					st,pins = "sdhci_grp";
-					st,function = "sdhci";
-				};
-				clcd {
-					st,pins = "clcd_grp";
-					st,function = "clcd";
-				};
-				sata {
-					st,pins = "sata_grp";
-					st,function = "sata";
-				};
-				pcie {
-					st,pins = "pcie_grp";
-					st,function = "pcie";
-				};
-
-			};
-		};
-
-		ahci@b1000000 {
-			status = "okay";
-		};
-
-		miphy@eb800000 {
-			status = "okay";
-		};
-
-		dma@ea800000 {
-			status = "okay";
-		};
-
-		dma@eb000000 {
-			status = "okay";
-		};
-
-		fsmc: flash@b0000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "xloader";
-				reg = <0x0 0x200000>;
-			};
-			partition@200000 {
-				label = "u-boot";
-				reg = <0x200000 0x200000>;
-			};
-			partition@400000 {
-				label = "environment";
-				reg = <0x400000 0x100000>;
-			};
-			partition@500000 {
-				label = "dtb";
-				reg = <0x500000 0x100000>;
-			};
-			partition@600000 {
-				label = "linux";
-				reg = <0x600000 0xC00000>;
-			};
-			partition@1200000 {
-				label = "rootfs";
-				reg = <0x1200000 0x0>;
-			};
-		};
-
-		gmac0: eth@e2000000 {
-			phy-mode = "rgmii";
-			status = "okay";
-		};
-
-		sdhci@b3000000 {
-			status = "okay";
-		};
-
-		smi: flash@ea000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@e6000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xe6000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		ehci@e4800000 {
-			status = "okay";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			button@1 {
-				label = "wakeup";
-				linux,code = <0x100>;
-				gpios = <&gpio1 1 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-		};
-
-		ehci@e5800000 {
-			status = "okay";
-		};
-
-		i2s0: i2s-play@b2400000 {
-			status = "okay";
-		};
-
-		i2s1: i2s-rec@b2000000 {
-			status = "okay";
-		};
-
-		incodec: dir-hifi {
-			compatible = "dummy,dir-hifi";
-			status = "okay";
-		};
-
-		ohci@e4000000 {
-			status = "okay";
-		};
-
-		ohci@e5000000 {
-			status = "okay";
-		};
-
-		outcodec: dit-hifi {
-			compatible = "dummy,dit-hifi";
-			status = "okay";
-		};
-
-		sound {
-			compatible = "spear,spear-evb";
-			audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>;
-			audio-codecs = <&incodec &outcodec &sta529 &sta529>;
-			codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio";
-			stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap";
-			dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm";
-			nr_controllers = <4>;
-		        status = "okay";
-		};
-
-		spdif0: spdif-in@d0100000 {
-			status = "okay";
-		};
-
-		spdif1: spdif-out@d0000000 {
-			status = "okay";
-		};
-
-		apb {
-			adc@e0080000 {
-				status = "okay";
-			};
-
-			i2s-play@b2400000 {
-				status = "okay";
-			};
-
-			i2s-rec@b2000000 {
-				status = "okay";
-			};
-
-			gpio0: gpio@e0600000 {
-			       status = "okay";
-			};
-
-			gpio1: gpio@e0680000 {
-			       status = "okay";
-			};
-
-			gpio@e2800000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@e0280000 {
-			       status = "okay";
-
-				sta529: sta529@1a {
-					compatible = "st,sta529";
-					reg = <0x1a>;
-				};
-			};
-
-			i2c1: i2c@b4000000 {
-			       status = "okay";
-
-				eeprom0@56 {
-					compatible = "st,eeprom";
-					reg = <0x56>;
-				};
-
-				stmpe801@41 {
-					compatible = "st,stmpe801";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x41>;
-					interrupts = <4 0x4>;
-					interrupt-parent = <&gpio0>;
-					irq-trigger = <0x2>;
-
-					stmpegpio: stmpe_gpio {
-						compatible = "st,stmpe-gpio";
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-				};
-			};
-
-			kbd@e0300000 {
-				linux,keymap = < 0x00000001
-						 0x00010002
-						 0x00020003
-						 0x00030004
-						 0x00040005
-						 0x00050006
-						 0x00060007
-						 0x00070008
-						 0x00080009
-						 0x0100000a
-						 0x0101000c
-						 0x0102000d
-						 0x0103000e
-						 0x0104000f
-						 0x01050010
-						 0x01060011
-						 0x01070012
-						 0x01080013
-						 0x02000014
-						 0x02010015
-						 0x02020016
-						 0x02030017
-						 0x02040018
-						 0x02050019
-						 0x0206001a
-						 0x0207001b
-						 0x0208001c
-						 0x0300001d
-						 0x0301001e
-						 0x0302001f
-						 0x03030020
-						 0x03040021
-						 0x03050022
-						 0x03060023
-						 0x03070024
-						 0x03080025
-						 0x04000026
-						 0x04010027
-						 0x04020028
-						 0x04030029
-						 0x0404002a
-						 0x0405002b
-						 0x0406002c
-						 0x0407002d
-						 0x0408002e
-						 0x0500002f
-						 0x05010030
-						 0x05020031
-						 0x05030032
-						 0x05040033
-						 0x05050034
-						 0x05060035
-						 0x05070036
-						 0x05080037
-						 0x06000038
-						 0x06010039
-						 0x0602003a
-						 0x0603003b
-						 0x0604003c
-						 0x0605003d
-						 0x0606003e
-						 0x0607003f
-						 0x06080040
-						 0x07000041
-						 0x07010042
-						 0x07020043
-						 0x07030044
-						 0x07040045
-						 0x07050046
-						 0x07060047
-						 0x07070048
-						 0x07080049
-						 0x0800004a
-						 0x0801004b
-						 0x0802004c
-						 0x0803004d
-						 0x0804004e
-						 0x0805004f
-						 0x08060050
-						 0x08070051
-						 0x08080052 >;
-			       autorepeat;
-			       st,mode = <0>;
-			       suspended_rate = <2000000>;
-			       status = "okay";
-			};
-
-			rtc@e0580000 {
-			       status = "okay";
-			};
-
-			serial@e0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b4100000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			spi0: spi@e0100000 {
-				status = "okay";
-				num-cs = <3>;
-				cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
-					   <&gpiopinctrl 85 0>;
-
-				m25p80@0 {
-					compatible = "m25p80";
-					reg = <0>;
-					spi-max-frequency = <12000000>;
-					spi-cpol;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-
-				stmpe610@1 {
-					compatible = "st,stmpe610";
-					spi-max-frequency = <1000000>;
-					spi-cpha;
-					reg = <1>;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x7>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-					interrupts = <100 0>;
-					interrupt-parent = <&gpiopinctrl>;
-					irq-trigger = <0x2>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					stmpe_touchscreen {
-						compatible = "st,stmpe-ts";
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <2>;
-						ts,settling = <2>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
-					};
-				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-			};
-
-			timer@ec800600 {
-				status = "okay";
-			};
-
-			wdt@ec800620 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear1340.dtsi b/src/arm/spear1340.dtsi
deleted file mode 100644
index e71df0f2cb52..000000000000
--- a/src/arm/spear1340.dtsi
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * DTS file for all SPEAr1340 SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear13xx.dtsi"
-
-/ {
-	compatible = "st,spear1340";
-
-	ahb {
-
-		spics: spics@e0700000{
-			compatible = "st,spear-spics-gpio";
-			reg = <0xe0700000 0x1000>;
-			st-spics,peripcfg-reg = <0x42c>;
-			st-spics,sw-enable-bit = <21>;
-			st-spics,cs-value-bit = <20>;
-			st-spics,cs-enable-mask = <3>;
-			st-spics,cs-enable-shift = <18>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		miphy0: miphy@eb800000 {
-			compatible = "st,spear1340-miphy";
-			reg = <0xeb800000 0x4000>;
-			misc = <&misc>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		ahci0: ahci@b1000000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb1000000 0x10000>;
-			interrupts = <0 72 0x4>;
-			phys = <&miphy0 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		pcie0: pcie@b1000000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb1000000 0x4000>;
-			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy0 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		i2s-play@b2400000 {
-			compatible = "snps,designware-i2s";
-			reg = <0xb2400000 0x10000>;
-			interrupt-names = "play_irq";
-			interrupts = <0 98 0x4
-				      0 99 0x4>;
-			play;
-			channel = <8>;
-			status = "disabled";
-		};
-
-		i2s-rec@b2000000 {
-			compatible = "snps,designware-i2s";
-			reg = <0xb2000000 0x10000>;
-			interrupt-names = "record_irq";
-			interrupts = <0 100  0x4
-				      0 101 0x4>;
-			record;
-			channel = <8>;
-			status = "disabled";
-		};
-
-		pinmux: pinmux@e0700000 {
-			compatible = "st,spear1340-pinmux";
-			reg = <0xe0700000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		pwm: pwm@e0180000 {
-			compatible ="st,spear13xx-pwm";
-			reg = <0xe0180000 0x1000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		spdif-in@d0100000 {
-			compatible = "st,spdif-in";
-			reg = < 0xd0100000 0x20000
-				0xd0110000 0x10000 >;
-			interrupts = <0 84 0x4>;
-			status = "disabled";
-		};
-
-		spdif-out@d0000000 {
-			compatible = "st,spdif-out";
-			reg = <0xd0000000 0x20000>;
-			interrupts = <0 85 0x4>;
-			status = "disabled";
-		};
-
-		spi1: spi@5d400000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x5d400000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 99 0x4>;
-			status = "disabled";
-		};
-
-		apb {
-			i2c1: i2c@b4000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xb4000000 0x1000>;
-				interrupts = <0 104 0x4>;
-				write-16bit;
-				status = "disabled";
-			};
-
-			serial@b4100000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb4100000 0x1000>;
-				interrupts = <0 105 0x4>;
-				status = "disabled";
-				dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
-					<&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
-				dma-names = "tx", "rx";
-			};
-
-			thermal@e07008c4 {
-				st,thermal-flags = <0x2a00>;
-			};
-
-			gpiopinctrl: gpio@e2800000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xe2800000 0x1000>;
-				interrupts = <0 107 0x4>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 252>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <250>;
-				st-plgpio,wdata-reg = <0x40>;
-				st-plgpio,dir-reg = <0x00>;
-				st-plgpio,ie-reg = <0x80>;
-				st-plgpio,rdata-reg = <0x20>;
-				st-plgpio,mis-reg = <0xa0>;
-				st-plgpio,eit-reg = <0x60>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear13xx.dtsi b/src/arm/spear13xx.dtsi
deleted file mode 100644
index a6eb5436d26d..000000000000
--- a/src/arm/spear13xx.dtsi
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * DTS file for all SPEAr13xx SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	gic: interrupt-controller@ec801000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0xec801000 0x1000 >,
-		      < 0xec800100 0x0100 >;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 6 0x04
-			      0 7 0x04>;
-	};
-
-	L2: l2-cache {
-		    compatible = "arm,pl310-cache";
-		    reg = <0xed000000 0x1000>;
-		    cache-unified;
-		    cache-level = <2>;
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAMA0,115200";
-	};
-
-	cpufreq {
-		compatible = "st,cpufreq-spear";
-		cpufreq_tbl = < 166000
-				200000
-				250000
-				300000
-				400000
-				500000
-				600000 >;
-		status = "disabled";
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x50000000 0x50000000 0x10000000
-			  0x80000000 0x80000000 0x20000000
-			  0xb0000000 0xb0000000 0x22000000
-			  0xd8000000 0xd8000000 0x01000000
-			  0xe0000000 0xe0000000 0x10000000>;
-
-		sdhci@b3000000 {
-			compatible = "st,sdhci-spear";
-			reg = <0xb3000000 0x100>;
-			interrupts = <0 28 0x4>;
-			status = "disabled";
-		};
-
-		cf@b2800000 {
-			compatible = "arasan,cf-spear1340";
-			reg = <0xb2800000 0x1000>;
-			interrupts = <0 29 0x4>;
-			status = "disabled";
-			dmas = <&dwdma0 0 0 0 0>;
-			dma-names = "data";
-		};
-
-		dwdma0: dma@ea800000 {
-			compatible = "snps,dma-spear1340";
-			reg = <0xea800000 0x1000>;
-			interrupts = <0 19 0x4>;
-			status = "disabled";
-
-			dma-channels = <8>;
-			#dma-cells = <3>;
-			dma-requests = <32>;
-			chan_allocation_order = <1>;
-			chan_priority = <1>;
-			block_size = <0xfff>;
-			dma-masters = <2>;
-			data_width = <3 3 0 0>;
-		};
-
-		dma@eb000000 {
-			compatible = "snps,dma-spear1340";
-			reg = <0xeb000000 0x1000>;
-			interrupts = <0 59 0x4>;
-			status = "disabled";
-
-			dma-requests = <32>;
-			dma-channels = <8>;
-			dma-masters = <2>;
-			#dma-cells = <3>;
-			chan_allocation_order = <1>;
-			chan_priority = <1>;
-			block_size = <0xfff>;
-			data_width = <3 3 0 0>;
-		};
-
-		fsmc: flash@b0000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xb0000000 0x1000	/* FSMC Register*/
-			       0xb0800000 0x0010	/* NAND Base DATA */
-			       0xb0820000 0x0010	/* NAND Base ADDR */
-			       0xb0810000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			interrupts = <0 20 0x4
-				      0 21 0x4
-				      0 22 0x4
-				      0 23 0x4>;
-			st,mode = <2>;
-			status = "disabled";
-		};
-
-		gmac0: eth@e2000000 {
-			compatible = "st,spear600-gmac";
-			reg = <0xe2000000 0x8000>;
-			interrupts = <0 33 0x4
-				      0 34 0x4>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			status = "disabled";
-		};
-
-		pcm {
-			compatible = "st,pcm-audio";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		smi: flash@ea000000 {
-			compatible = "st,spear600-smi";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xea000000 0x1000>;
-			interrupts = <0 30 0x4>;
-			status = "disabled";
-		};
-
-		ehci@e4800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe4800000 0x1000>;
-			interrupts = <0 64 0x4>;
-			usbh0_id = <0>;
-			status = "disabled";
-		};
-
-		ehci@e5800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe5800000 0x1000>;
-			interrupts = <0 66 0x4>;
-			usbh1_id = <1>;
-			status = "disabled";
-		};
-
-		ohci@e4000000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe4000000 0x1000>;
-			interrupts = <0 65 0x4>;
-			usbh0_id = <0>;
-			status = "disabled";
-		};
-
-		ohci@e5000000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe5000000 0x1000>;
-			interrupts = <0 67 0x4>;
-			usbh1_id = <1>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x50000000 0x50000000 0x10000000
-				  0xb0000000 0xb0000000 0x10000000
-				  0xd0000000 0xd0000000 0x02000000
-				  0xd8000000 0xd8000000 0x01000000
-				  0xe0000000 0xe0000000 0x10000000>;
-
-			misc: syscon@e0700000 {
-				compatible = "st,spear1340-misc", "syscon";
-				reg = <0xe0700000 0x1000>;
-			};
-
-			gpio0: gpio@e0600000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xe0600000 0x1000>;
-				interrupts = <0 24 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@e0680000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xe0680000 0x1000>;
-				interrupts = <0 25 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			kbd@e0300000 {
-				compatible = "st,spear300-kbd";
-				reg = <0xe0300000 0x1000>;
-				interrupts = <0 52 0x4>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@e0280000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xe0280000 0x1000>;
-				interrupts = <0 41 0x4>;
-				status = "disabled";
-			};
-
-			i2s@e0180000 {
-				compatible = "st,designware-i2s";
-				reg = <0xe0180000 0x1000>;
-				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 10 0x4
-					      0 11 0x4 >;
-				status = "disabled";
-			};
-
-			i2s@e0200000 {
-				compatible = "st,designware-i2s";
-				reg = <0xe0200000 0x1000>;
-				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 26 0x4
-					      0 53 0x4>;
-				status = "disabled";
-			};
-
-			spi0: spi@e0100000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0xe0100000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <0 31 0x4>;
-				status = "disabled";
-				dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
-					<&dwdma0 0x0280 0 0 0>;  /* 0x5 << 7 */
-				dma-names = "tx", "rx";
-			};
-
-			rtc@e0580000 {
-				compatible = "st,spear600-rtc";
-				reg = <0xe0580000 0x1000>;
-				interrupts = <0 36 0x4>;
-				status = "disabled";
-			};
-
-			serial@e0000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xe0000000 0x1000>;
-				interrupts = <0 35 0x4>;
-				status = "disabled";
-			};
-
-			adc@e0080000 {
-				compatible = "st,spear600-adc";
-				reg = <0xe0080000 0x1000>;
-				interrupts = <0 12 0x4>;
-				status = "disabled";
-			};
-
-			timer@e0380000 {
-				compatible = "st,spear-timer";
-				reg = <0xe0380000 0x400>;
-				interrupts = <0 37 0x4>;
-			};
-
-			timer@ec800600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xec800600 0x20>;
-				interrupts = <1 13 0x4>;
-				status = "disabled";
-			};
-
-			wdt@ec800620 {
-				compatible = "arm,cortex-a9-twd-wdt";
-				reg = <0xec800620 0x20>;
-				status = "disabled";
-			};
-
-			thermal@e07008c4 {
-				compatible = "st,thermal-spear1340";
-				reg = <0xe07008c4 0x4>;
-				thermal_flags = <0x7000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear300-evb.dts b/src/arm/spear300-evb.dts
deleted file mode 100644
index 5de1431653e4..000000000000
--- a/src/arm/spear300-evb.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * DTS file for SPEAr300 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear300.dtsi"
-
-/ {
-	model = "ST SPEAr300 Evaluation Board";
-	compatible = "st,spear300-evb", "st,spear300";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@99000000 {
-			st,pinmux-mode = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				mii0 {
-					st,pins = "mii0_grp";
-					st,function = "mii0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				clcd {
-					st,pins = "clcd_pfmode_grp";
-					st,function = "clcd";
-				};
-				sdhci {
-					st,pins = "sdhci_4bit_grp";
-					st,function = "sdhci";
-				};
-				gpio1 {
-					st,pins = "gpio1_4_to_7_grp",
-						"gpio1_0_to_3_grp";
-					st,function = "gpio1";
-				};
-			};
-		};
-
-		clcd@60000000 {
-			status = "okay";
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		fsmc: flash@94000000 {
-			status = "okay";
-		};
-
-		gmac: eth@e0800000 {
-			status = "okay";
-		};
-
-		sdhci@70000000 {
-			cd-gpios = <&gpio1 0 0>;
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			gpio1: gpio@a9000000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-			       status = "okay";
-			};
-
-			kbd@a0000000 {
-				linux,keymap = < 0x00000001
-						 0x00010002
-						 0x00020003
-						 0x00030004
-						 0x00040005
-						 0x00050006
-						 0x00060007
-						 0x00070008
-						 0x00080009
-						 0x0100000a
-						 0x0101000c
-						 0x0102000d
-						 0x0103000e
-						 0x0104000f
-						 0x01050010
-						 0x01060011
-						 0x01070012
-						 0x01080013
-						 0x02000014
-						 0x02010015
-						 0x02020016
-						 0x02030017
-						 0x02040018
-						 0x02050019
-						 0x0206001a
-						 0x0207001b
-						 0x0208001c
-						 0x0300001d
-						 0x0301001e
-						 0x0302001f
-						 0x03030020
-						 0x03040021
-						 0x03050022
-						 0x03060023
-						 0x03070024
-						 0x03080025
-						 0x04000026
-						 0x04010027
-						 0x04020028
-						 0x04030029
-						 0x0404002a
-						 0x0405002b
-						 0x0406002c
-						 0x0407002d
-						 0x0408002e
-						 0x0500002f
-						 0x05010030
-						 0x05020031
-						 0x05030032
-						 0x05040033
-						 0x05050034
-						 0x05060035
-						 0x05070036
-						 0x05080037
-						 0x06000038
-						 0x06010039
-						 0x0602003a
-						 0x0603003b
-						 0x0604003c
-						 0x0605003d
-						 0x0606003e
-						 0x0607003f
-						 0x06080040
-						 0x07000041
-						 0x07010042
-						 0x07020043
-						 0x07030044
-						 0x07040045
-						 0x07050046
-						 0x07060047
-						 0x07070048
-						 0x07080049
-						 0x0800004a
-						 0x0801004b
-						 0x0802004c
-						 0x0803004d
-						 0x0804004e
-						 0x0805004f
-						 0x08060050
-						 0x08070051
-						 0x08080052 >;
-			       autorepeat;
-			       st,mode = <0>;
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear300.dtsi b/src/arm/spear300.dtsi
deleted file mode 100644
index f79b3dfaabe6..000000000000
--- a/src/arm/spear300.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * DTS file for SPEAr300 SoC
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear3xx.dtsi"
-
-/ {
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x60000000 0x60000000 0x50000000
-			  0xd0000000 0xd0000000 0x30000000>;
-
-		pinmux@99000000 {
-			compatible = "st,spear300-pinmux";
-			reg = <0x99000000 0x1000>;
-		};
-
-		clcd@60000000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x60000000 0x1000>;
-			interrupts = <30>;
-			status = "disabled";
-		};
-
-		fsmc: flash@94000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x94000000 0x1000	/* FSMC Register */
-			       0x80000000 0x0010	/* NAND Base DATA */
-			       0x80020000 0x0010	/* NAND Base ADDR */
-			       0x80010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		sdhci@70000000 {
-			compatible = "st,sdhci-spear";
-			reg = <0x70000000 0x100>;
-			interrupts = <1>;
-			status = "disabled";
-		};
-
-		shirq: interrupt-controller@0x50000000 {
-			compatible = "st,spear300-shirq";
-			reg = <0x50000000 0x1000>;
-			interrupts = <28>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xa0000000 0xa0000000 0x10000000
-				  0xd0000000 0xd0000000 0x30000000>;
-
-			gpio1: gpio@a9000000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xa9000000 0x1000>;
-				interrupts = <8>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			kbd@a0000000 {
-				compatible = "st,spear300-kbd";
-				reg = <0xa0000000 0x1000>;
-				interrupts = <7>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear310-evb.dts b/src/arm/spear310-evb.dts
deleted file mode 100644
index b09632963d15..000000000000
--- a/src/arm/spear310-evb.dts
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * DTS file for SPEAr310 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear310.dtsi"
-
-/ {
-	model = "ST SPEAr310 Evaluation Board";
-	compatible = "st,spear310-evb", "st,spear310";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@b4000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				gpio0 {
-					st,pins = "gpio0_pin0_grp",
-						"gpio0_pin1_grp",
-						"gpio0_pin2_grp",
-						"gpio0_pin3_grp",
-						"gpio0_pin4_grp",
-						"gpio0_pin5_grp";
-					st,function = "gpio0";
-				};
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				mii0 {
-					st,pins = "mii0_grp";
-					st,function = "mii0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				emi {
-					st,pins = "emi_cs_0_to_5_grp";
-					st,function = "emi";
-				};
-				fsmc {
-					st,pins = "fsmc_grp";
-					st,function = "fsmc";
-				};
-				uart1 {
-					st,pins = "uart1_grp";
-					st,function = "uart1";
-				};
-				uart2 {
-					st,pins = "uart2_grp";
-					st,function = "uart2";
-				};
-				uart3 {
-					st,pins = "uart3_grp";
-					st,function = "uart3";
-				};
-				uart4 {
-					st,pins = "uart4_grp";
-					st,function = "uart4";
-				};
-				uart5 {
-					st,pins = "uart5_grp";
-					st,function = "uart5";
-				};
-			};
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		fsmc: flash@44000000 {
-			status = "okay";
-		};
-
-		gmac: eth@e0800000 {
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2080000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2100000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2180000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2200000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear310.dtsi b/src/arm/spear310.dtsi
deleted file mode 100644
index 95372080eea6..000000000000
--- a/src/arm/spear310.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * DTS file for SPEAr310 SoC
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear3xx.dtsi"
-
-/ {
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x40000000 0x40000000 0x10000000
-			  0xb0000000 0xb0000000 0x10000000
-			  0xd0000000 0xd0000000 0x30000000>;
-
-		pinmux: pinmux@b4000000 {
-			compatible = "st,spear310-pinmux";
-			reg = <0xb4000000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		fsmc: flash@44000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x44000000 0x1000	/* FSMC Register */
-			       0x40000000 0x0010	/* NAND Base DATA */
-			       0x40020000 0x0010	/* NAND Base ADDR */
-			       0x40010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		shirq: interrupt-controller@0xb4000000 {
-			compatible = "st,spear310-shirq";
-			reg = <0xb4000000 0x1000>;
-			interrupts = <28 29 30 1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xb0000000 0xb0000000 0x10000000
-				  0xd0000000 0xd0000000 0x30000000>;
-
-			serial@b2000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2000000 0x1000>;
-				interrupts = <8>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2080000 0x1000>;
-				interrupts = <9>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2100000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2100000 0x1000>;
-				interrupts = <10>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2180000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2180000 0x1000>;
-				interrupts = <11>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2200000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2200000 0x1000>;
-				interrupts = <12>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			gpiopinctrl: gpio@b4000000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xb4000000 0x1000>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 102>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <102>;
-				st-plgpio,enb-reg = <0x10>;
-				st-plgpio,wdata-reg = <0x20>;
-				st-plgpio,dir-reg = <0x30>;
-				st-plgpio,ie-reg = <0x50>;
-				st-plgpio,rdata-reg = <0x40>;
-				st-plgpio,mis-reg = <0x60>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear320-evb.dts b/src/arm/spear320-evb.dts
deleted file mode 100644
index fdedbb514102..000000000000
--- a/src/arm/spear320-evb.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * DTS file for SPEAr320 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear320.dtsi"
-
-/ {
-	model = "ST SPEAr320 Evaluation Board";
-	compatible = "st,spear320-evb", "st,spear320";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@b3000000 {
-			st,pinmux-mode = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				mii0 {
-					st,pins = "mii0_grp";
-					st,function = "mii0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				sdhci {
-					st,pins = "sdhci_cd_51_grp";
-					st,function = "sdhci";
-				};
-				i2s {
-					st,pins = "i2s_grp";
-					st,function = "i2s";
-				};
-				uart1 {
-					st,pins = "uart1_grp";
-					st,function = "uart1";
-				};
-				uart2 {
-					st,pins = "uart2_grp";
-					st,function = "uart2";
-				};
-				can0 {
-					st,pins = "can0_grp";
-					st,function = "can0";
-				};
-				can1 {
-					st,pins = "can1_grp";
-					st,function = "can1";
-				};
-				mii2 {
-					st,pins = "mii2_grp";
-					st,function = "mii2";
-				};
-				pwm0_1 {
-					st,pins = "pwm0_1_pin_37_38_grp";
-					st,function = "pwm0_1";
-				};
-			};
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		fsmc: flash@4c000000 {
-			status = "okay";
-		};
-
-		gmac: eth@e0800000 {
-			status = "okay";
-		};
-
-		sdhci@70000000 {
-			power-gpio = <&gpiopinctrl 61 1>;
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		spi1: spi@a5000000 {
-			status = "okay";
-		};
-
-		spi2: spi@a6000000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			gpio@b3000000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-			       status = "okay";
-			};
-
-			i2c1: i2c@a7000000 {
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a3000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a4000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear320-hmi.dts b/src/arm/spear320-hmi.dts
deleted file mode 100644
index 0aa6fef5ce22..000000000000
--- a/src/arm/spear320-hmi.dts
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * DTS file for SPEAr320 Evaluation Baord
- *
- * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear320.dtsi"
-
-/ {
-	model = "ST SPEAr320 HMI Board";
-	compatible = "st,spear320-hmi", "st,spear320";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@b3000000 {
-			st,pinmux-mode = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				clcd {
-					st,pins = "clcd_grp";
-					st,function = "clcd";
-				};
-				fsmc {
-					st,pins = "fsmc_8bit_grp";
-					st,function = "fsmc";
-				};
-				sdhci {
-					st,pins = "sdhci_cd_12_grp";
-					st,function = "sdhci";
-				};
-				i2s {
-					st,pins = "i2s_grp";
-					st,function = "i2s";
-				};
-				uart1 {
-					st,pins = "uart1_grp";
-					st,function = "uart1";
-				};
-				uart2 {
-					st,pins = "uart2_grp";
-					st,function = "uart2";
-				};
-				can0 {
-					st,pins = "can0_grp";
-					st,function = "can0";
-				};
-				can1 {
-					st,pins = "can1_grp";
-					st,function = "can1";
-				};
-				mii0_1 {
-					st,pins = "rmii0_1_grp";
-					st,function = "mii0_1";
-				};
-				pwm0_1 {
-					st,pins = "pwm0_1_pin_37_38_grp";
-					st,function = "pwm0_1";
-				};
-				pwm2 {
-					st,pins = "pwm2_pin_34_grp";
-					st,function = "pwm2";
-				};
-			};
-		};
-
-		clcd@90000000 {
-			status = "okay";
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		fsmc: flash@4c000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "xloader";
-				reg = <0x0 0x80000>;
-			};
-			partition@80000 {
-				label = "u-boot";
-				reg = <0x80000 0x140000>;
-			};
-			partition@1C0000 {
-				label = "environment";
-				reg = <0x1C0000 0x40000>;
-			};
-			partition@200000 {
-				label = "dtb";
-				reg = <0x200000 0x40000>;
-			};
-			partition@240000 {
-				label = "linux";
-				reg = <0x240000 0xC00000>;
-			};
-			partition@E40000 {
-				label = "rootfs";
-				reg = <0xE40000 0x0>;
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			button@1 {
-				label = "user button 1";
-				linux,code = <0x100>;
-				gpios = <&stmpegpio 3 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-
-			button@2 {
-				label = "user button 2";
-				linux,code = <0x200>;
-				gpios = <&stmpegpio 2 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		pwm: pwm@a8000000 {
-			status = "okay";
-		};
-
-		sdhci@70000000 {
-			power-gpio = <&gpiopinctrl 50 1>;
-			power_always_enb;
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		spi1: spi@a5000000 {
-			status = "okay";
-		};
-
-		spi2: spi@a6000000 {
-			status = "okay";
-		};
-
-		usbd@e1100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			gpio@b3000000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-				status = "okay";
-
-				stmpe811@41 {
-					compatible = "st,stmpe811";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x41>;
-					irq-over-gpio;
-					irq-gpios = <&gpiopinctrl 29 0x4>;
-					id = <0>;
-					blocks = <0x5>;
-					irq-trigger = <0x1>;
-
-					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
-						reg = <0>;
-						gpio-controller;
-						#gpio-cells = <2>;
-						gpio,norequest-mask = <0xF3>;
-					};
-
-					stmpe610-ts {
-						compatible = "stmpe,ts";
-						reg = <0>;
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <3>;
-						ts,settling = <4>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
-					};
-				};
-			};
-
-			i2c1: i2c@a7000000 {
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a3000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a4000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear320.dtsi b/src/arm/spear320.dtsi
deleted file mode 100644
index ffea342aeec9..000000000000
--- a/src/arm/spear320.dtsi
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * DTS file for SPEAr320 SoC
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear3xx.dtsi"
-
-/ {
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x40000000 0x40000000 0x80000000
-			  0xd0000000 0xd0000000 0x30000000>;
-
-		pinmux: pinmux@b3000000 {
-			compatible = "st,spear320-pinmux";
-			reg = <0xb3000000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		clcd@90000000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x90000000 0x1000>;
-			interrupts = <8>;
-			interrupt-parent = <&shirq>;
-			status = "disabled";
-		};
-
-		fsmc: flash@4c000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x4c000000 0x1000	/* FSMC Register */
-			       0x50000000 0x0010	/* NAND Base DATA */
-			       0x50020000 0x0010	/* NAND Base ADDR */
-			       0x50010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		sdhci@70000000 {
-			compatible = "st,sdhci-spear";
-			reg = <0x70000000 0x100>;
-			interrupts = <10>;
-			interrupt-parent = <&shirq>;
-			status = "disabled";
-		};
-
-		shirq: interrupt-controller@0xb3000000 {
-			compatible = "st,spear320-shirq";
-			reg = <0xb3000000 0x1000>;
-			interrupts = <30 28 29 1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-
-		spi1: spi@a5000000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xa5000000 0x1000>;
-			interrupts = <15>;
-			interrupt-parent = <&shirq>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@a6000000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xa6000000 0x1000>;
-			interrupts = <16>;
-			interrupt-parent = <&shirq>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm: pwm@a8000000 {
-			compatible ="st,spear-pwm";
-			reg = <0xa8000000 0x1000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-                };
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xa0000000 0xa0000000 0x20000000
-				  0xd0000000 0xd0000000 0x30000000>;
-
-			i2c1: i2c@a7000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xa7000000 0x1000>;
-				interrupts = <21>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@a3000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xa3000000 0x1000>;
-				interrupts = <13>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@a4000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xa4000000 0x1000>;
-				interrupts = <14>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			gpiopinctrl: gpio@b3000000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xb3000000 0x1000>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 102>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <102>;
-				st-plgpio,enb-reg = <0x24>;
-				st-plgpio,wdata-reg = <0x34>;
-				st-plgpio,dir-reg = <0x44>;
-				st-plgpio,ie-reg = <0x64>;
-				st-plgpio,rdata-reg = <0x54>;
-				st-plgpio,mis-reg = <0x84>;
-				st-plgpio,eit-reg = <0x94>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear3xx.dtsi b/src/arm/spear3xx.dtsi
deleted file mode 100644
index f0e3fcf8e323..000000000000
--- a/src/arm/spear3xx.dtsi
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * DTS file for all SPEAr3xx SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&vic>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-		vic: interrupt-controller@f1100000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1100000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		dma@fc400000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0xfc400000 0x1000>;
-			interrupt-parent = <&vic>;
-			interrupts = <8>;
-			status = "disabled";
-		};
-
-		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
-			reg = <0xe0800000 0x8000>;
-			interrupts = <23 22>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		smi: flash@fc000000 {
-			compatible = "st,spear600-smi";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xfc000000 0x1000>;
-			interrupts = <9>;
-			status = "disabled";
-		};
-
-		spi0: spi@d0100000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xd0100000 0x1000>;
-			interrupts = <20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ehci@e1800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe1800000 0x1000>;
-			interrupts = <26>;
-			status = "disabled";
-		};
-
-		ohci@e1900000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe1900000 0x1000>;
-			interrupts = <25>;
-			status = "disabled";
-		};
-
-		ohci@e2100000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe2100000 0x1000>;
-			interrupts = <27>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-			gpio0: gpio@fc980000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xfc980000 0x1000>;
-				interrupts = <11>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@d0180000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xd0180000 0x1000>;
-				interrupts = <21>;
-				status = "disabled";
-			};
-
-			rtc@fc900000 {
-				compatible = "st,spear600-rtc";
-				reg = <0xfc900000 0x1000>;
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			serial@d0000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0000000 0x1000>;
-				interrupts = <19>;
-				status = "disabled";
-			};
-
-			wdt@fc880000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0xfc880000 0x1000>;
-				interrupts = <12>;
-				status = "disabled";
-			};
-
-			timer@f0000000 {
-				compatible = "st,spear-timer";
-				reg = <0xf0000000 0x400>;
-				interrupts = <2>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear600-evb.dts b/src/arm/spear600-evb.dts
deleted file mode 100644
index d865a891776d..000000000000
--- a/src/arm/spear600-evb.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear600.dtsi"
-
-/ {
-	model = "ST SPEAr600 Evaluation Board";
-	compatible = "st,spear600-evb", "st,spear600";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
-	ahb {
-		clcd@fc200000 {
-			status = "okay";
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ehci@e2000000 {
-			status = "okay";
-		};
-
-		gmac: ethernet@e0800000 {
-			phy-mode = "gmii";
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		apb {
-			serial@d0000000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@d0080000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			i2c@d0200000 {
-				clock-frequency = <400000>;
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear600.dtsi b/src/arm/spear600.dtsi
deleted file mode 100644
index 9f60a7b6a42b..000000000000
--- a/src/arm/spear600.dtsi
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "st,spear600";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-		vic0: interrupt-controller@f1100000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1100000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@f1000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		clcd@fc200000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0xfc200000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <12>;
-			status = "disabled";
-		};
-
-		dma@fc400000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0xfc400000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <10>;
-			status = "disabled";
-		};
-
-		gmac: ethernet@e0800000 {
-			compatible = "st,spear600-gmac";
-			reg = <0xe0800000 0x8000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <24 23>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			phy-mode = "gmii";
-			status = "disabled";
-		};
-
-		fsmc: flash@d1800000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd1800000 0x1000	/* FSMC Register */
-			       0xd2000000 0x0010	/* NAND Base DATA */
-			       0xd2020000 0x0010	/* NAND Base ADDR */
-			       0xd2010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		smi: flash@fc000000 {
-			compatible = "st,spear600-smi";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xfc000000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <12>;
-			status = "disabled";
-		};
-
-		ehci@e1800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe1800000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <27>;
-			status = "disabled";
-		};
-
-		ehci@e2000000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe2000000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <29>;
-			status = "disabled";
-		};
-
-		ohci@e1900000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe1900000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <26>;
-			status = "disabled";
-		};
-
-		ohci@e2100000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe2100000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <28>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-			serial@d0000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0000000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			serial@d0080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0080000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <25>;
-				status = "disabled";
-			};
-
-			/* local/cpu GPIO */
-			gpio0: gpio@f0100000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xf0100000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <18>;
-			};
-
-			/* basic GPIO */
-			gpio1: gpio@fc980000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xfc980000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <19>;
-			};
-
-			/* appl GPIO */
-			gpio2: gpio@d8100000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xd8100000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <4>;
-			};
-
-			i2c@d0200000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xd0200000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			rtc@fc900000 {
-				compatible = "st,spear600-rtc";
-				reg = <0xfc900000 0x1000>;
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			timer@f0000000 {
-				compatible = "st,spear-timer";
-				reg = <0xf0000000 0x400>;
-				interrupt-parent = <&vic0>;
-				interrupts = <16>;
-			};
-		};
-	};
-};
diff --git a/src/arm/st-pincfg.h b/src/arm/st-pincfg.h
deleted file mode 100644
index 4851c387d52d..000000000000
--- a/src/arm/st-pincfg.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _ST_PINCFG_H_
-#define _ST_PINCFG_H_
-
-/* Alternate functions */
-#define ALT1	1
-#define ALT2	2
-#define ALT3	3
-#define ALT4	4
-#define ALT5	5
-#define ALT6	6
-#define ALT7	7
-
-/* Output enable */
-#define OE			(1 << 27)
-/* Pull Up */
-#define PU			(1 << 26)
-/* Open Drain */
-#define OD			(1 << 25)
-#define RT			(1 << 23)
-#define INVERTCLK		(1 << 22)
-#define CLKNOTDATA		(1 << 21)
-#define DOUBLE_EDGE		(1 << 20)
-#define CLK_A			(0 << 18)
-#define CLK_B			(1 << 18)
-#define CLK_C			(2 << 18)
-#define CLK_D			(3 << 18)
-
-/* User-frendly defines for Pin Direction */
-		/* oe = 0, pu = 0, od = 0 */
-#define IN			(0)
-		/* oe = 0, pu = 1, od = 0 */
-#define IN_PU			(PU)
-		/* oe = 1, pu = 0, od = 0 */
-#define OUT			(OE)
-		/* oe = 1, pu = 0, od = 1 */
-#define BIDIR			(OE | OD)
-		/* oe = 1, pu = 1, od = 1 */
-#define BIDIR_PU		(OE | PU | OD)
-
-/* RETIME_TYPE */
-/*
- * B Mode
- * Bypass retime with optional delay parameter
- */
-#define BYPASS		(0)
-/*
- * R0, R1, R0D, R1D modes
- * single-edge data non inverted clock, retime data with clk
- */
-#define SE_NICLK_IO	(RT)
-/*
- * RIV0, RIV1, RIV0D, RIV1D modes
- * single-edge data inverted clock, retime data with clk
- */
-#define SE_ICLK_IO	(RT | INVERTCLK)
-/*
- * R0E, R1E, R0ED, R1ED modes
- * double-edge data, retime data with clk
- */
-#define DE_IO		(RT | DOUBLE_EDGE)
-/*
- * CIV0, CIV1 modes with inverted clock
- * Retiming the clk pins will park clock & reduce the noise within the core.
- */
-#define ICLK		(RT | CLKNOTDATA | INVERTCLK)
-/*
- * CLK0, CLK1 modes with non-inverted clock
- * Retiming the clk pins will park clock & reduce the noise within the core.
- */
-#define NICLK		(RT | CLKNOTDATA)
-#endif /* _ST_PINCFG_H_ */
diff --git a/src/arm/ste-ccu8540-pinctrl.dtsi b/src/arm/ste-ccu8540-pinctrl.dtsi
deleted file mode 100644
index e0799966bc25..000000000000
--- a/src/arm/ste-ccu8540-pinctrl.dtsi
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include "ste-nomadik-pinctrl.dtsi"
-
-/ {
-	soc {
-		pinctrl {
-			uart0 {
-				uart0_default_mux: uart0_mux {
-					default_mux {
-						ste,function = "u0";
-						ste,pins = "u0_a_1";
-					};
-				};
-
-				uart0_default_mode: uart0_default {
-					default_cfg1 {
-						ste,pins = "GPIO0", "GPIO2";
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO1", "GPIO3";
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart0_sleep_mode: uart0_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO0", "GPIO2";
-						ste,config = <&slpm_in_pu>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO1", "GPIO3";
-						ste,config = <&slpm_out_hi>;
-					};
-				};
-			};
-
-			uart2 {
-				uart2_default_mode: uart2_default {
-					default_mux {
-						ste,function = "u2";
-						ste,pins = "u2txrx_a_1";
-					};
-
-					default_cfg1 {
-						ste,pins = "GPIO120";
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO121";
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart2_sleep_mode: uart2_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO120";
-						ste,config = <&slpm_in_pu>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO121";
-						ste,config = <&slpm_out_hi>;
-					};
-				};
-			};
-
-			i2c0 {
-				i2c0_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c0";
-						ste,pins = "i2c0_a_1";
-					};
-				};
-
-				i2c0_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO147", "GPIO148";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c0_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO147", "GPIO148";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c1 {
-				i2c1_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c1";
-						ste,pins = "i2c1_b_2";
-					};
-				};
-
-				i2c1_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO16", "GPIO17";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c1_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO16", "GPIO17";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c2 {
-				i2c2_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c2";
-						ste,pins = "i2c2_b_2";
-					};
-				};
-
-				i2c2_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO10", "GPIO11";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c2_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO11", "GPIO11";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c4 {
-				i2c4_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c4";
-						ste,pins = "i2c4_b_2";
-					};
-				};
-
-				i2c4_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO122", "GPIO123";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c4_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO122", "GPIO123";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c5 {
-				i2c5_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c5";
-						ste,pins = "i2c5_c_2";
-					};
-				};
-
-				i2c5_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO118", "GPIO119";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c5_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO118", "GPIO119";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-ccu8540.dts b/src/arm/ste-ccu8540.dts
deleted file mode 100644
index 32dd55e5f4e6..000000000000
--- a/src/arm/ste-ccu8540.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright 2013 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-#include "ste-ccu8540-pinctrl.dtsi"
-
-/ {
-	model = "ST-Ericsson U8540 platform with Device Tree";
-	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
-	};
-
-	soc {
-		pinctrl {
-			compatible = "stericsson,db8540-pinctrl";
-		};
-
-		prcmu@80157000 {
-			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
-			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-		};
-
-		uart@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
-			status = "okay";
-		};
-
-		i2c0: i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
-		};
-
-		i2c1: i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
-		};
-
-		i2c2: i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
-		};
-
-		i2c3: i2c@80110000 {
-			status = "disabled";
-		};
-
-		i2c4: i2c@8012a000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
-			pinctrl-1 = <&i2c4_sleep_mode>;
-		};
-
-		i2c5: i2c@80001000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
-			pinctrl-1 = <&i2c5_sleep_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-ccu9540.dts b/src/arm/ste-ccu9540.dts
deleted file mode 100644
index 651c56d400a4..000000000000
--- a/src/arm/ste-ccu9540.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-
-/ {
-	model = "ST-Ericsson CCU9540 platform with Device Tree";
-	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc {
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-			cd-gpios  = <&gpio7 6 0x4>; // 230
-			cd-inverted;
-
-			status = "okay";
-		};
-
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/ste-dbx5x0.dtsi b/src/arm/ste-dbx5x0.dtsi
deleted file mode 100644
index 9d2323020d34..000000000000
--- a/src/arm/ste-dbx5x0.dtsi
+++ /dev/null
@@ -1,1049 +0,0 @@
-/*
- * Copyright 2012 Linaro Ltd
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/mfd/dbx500-prcmu.h>
-#include "skeleton.dtsi"
-
-/ {
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "stericsson,db8500";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		intc: interrupt-controller@a0411000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xa0411000 0x1000>,
-			      <0xa0410100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-
-		clocks {
-			compatible = "stericsson,u8500-clks";
-
-			prcmu_clk: prcmu-clock {
-				#clock-cells = <1>;
-			};
-
-			prcc_pclk: prcc-periph-clock {
-				#clock-cells = <2>;
-			};
-
-			prcc_kclk: prcc-kernel-clock {
-				#clock-cells = <2>;
-			};
-
-			rtc_clk: rtc32k-clock {
-				#clock-cells = <0>;
-			};
-
-			smp_twd_clk: smp-twd-clock {
-				#clock-cells = <0>;
-			};
-		};
-
-		mtu@a03c6000 {
-			/* Nomadik System Timer */
-			compatible = "st,nomadik-mtu";
-			reg = <0xa03c6000 0x1000>;
-			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
-			clock-names = "timclk", "apb_pclk";
-		};
-
-		timer@a0410600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
-
-			clocks = <&smp_twd_clk>;
-		};
-
-		rtc@80154000 {
-			compatible = "arm,rtc-pl031", "arm,primecell";
-			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&rtc_clk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio0: gpio@8012e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <0>;
-
-			clocks = <&prcc_pclk 1 9>;
-		};
-
-		gpio1: gpio@8012e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <1>;
-
-			clocks = <&prcc_pclk 1 9>;
-		};
-
-		gpio2: gpio@8000e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <2>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio3: gpio@8000e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <3>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio4: gpio@8000e100 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <4>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio5: gpio@8000e180 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <5>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio6: gpio@8011e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <6>;
-
-			clocks = <&prcc_pclk 2 11>;
-		};
-
-		gpio7: gpio@8011e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <7>;
-
-			clocks = <&prcc_pclk 2 11>;
-		};
-
-		gpio8: gpio@a03fe000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <8>;
-
-			clocks = <&prcc_pclk 5 1>;
-		};
-
-		pinctrl {
-			compatible = "stericsson,db8500-pinctrl";
-			prcm = <&prcmu>;
-		};
-
-		usb_per5@a03e0000 {
-			compatible = "stericsson,db8500-musb";
-			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-
-			dr_mode = "otg";
-
-			dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
-			       <&dma 38 0 0x0>, /* Logical - MemToDev */
-			       <&dma 37 0 0x2>, /* Logical - DevToMem */
-			       <&dma 37 0 0x0>, /* Logical - MemToDev */
-			       <&dma 36 0 0x2>, /* Logical - DevToMem */
-			       <&dma 36 0 0x0>, /* Logical - MemToDev */
-			       <&dma 19 0 0x2>, /* Logical - DevToMem */
-			       <&dma 19 0 0x0>, /* Logical - MemToDev */
-			       <&dma 18 0 0x2>, /* Logical - DevToMem */
-			       <&dma 18 0 0x0>, /* Logical - MemToDev */
-			       <&dma 17 0 0x2>, /* Logical - DevToMem */
-			       <&dma 17 0 0x0>, /* Logical - MemToDev */
-			       <&dma 16 0 0x2>, /* Logical - DevToMem */
-			       <&dma 16 0 0x0>, /* Logical - MemToDev */
-			       <&dma 39 0 0x2>, /* Logical - DevToMem */
-			       <&dma 39 0 0x0>; /* Logical - MemToDev */
-
-			dma-names = "iep_1_9",  "oep_1_9",
-				    "iep_2_10", "oep_2_10",
-				    "iep_3_11", "oep_3_11",
-				    "iep_4_12", "oep_4_12",
-				    "iep_5_13", "oep_5_13",
-				    "iep_6_14", "oep_6_14",
-				    "iep_7_15", "oep_7_15",
-				    "iep_8",    "oep_8";
-
-			clocks = <&prcc_pclk 5 0>;
-		};
-
-		dma: dma-controller@801C0000 {
-			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			reg-names = "base", "lcpa";
-			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-
-			#dma-cells = <3>;
-			memcpy-channels = <56 57 58 59 60>;
-
-			clocks = <&prcmu_clk PRCMU_DMACLK>;
-		};
-
-		prcmu: prcmu@80157000 {
-			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
-			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ranges;
-
-			prcmu-timer-4@80157450 {
-				compatible = "stericsson,db8500-prcmu-timer-4";
-				reg = <0x80157450 0xC>;
-			};
-
-			cpufreq {
-				compatible = "stericsson,cpufreq-ux500";
-				clocks = <&prcmu_clk PRCMU_ARMSS>;
-				clock-names = "armss";
-				status = "disabled";
-			};
-
-			thermal@801573c0 {
-				compatible = "stericsson,db8500-thermal";
-				reg = <0x801573c0 0x40>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
-					     <22 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
-				status = "disabled";
-			};
-
-			db8500-prcmu-regulators {
-				compatible = "stericsson,db8500-prcmu-regulator";
-
-				// DB8500_REGULATOR_VAPE
-				db8500_vape_reg: db8500_vape {
-					regulator-compatible = "db8500_vape";
-					regulator-always-on;
-				};
-
-				// DB8500_REGULATOR_VARM
-				db8500_varm_reg: db8500_varm {
-					regulator-compatible = "db8500_varm";
-				};
-
-				// DB8500_REGULATOR_VMODEM
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-compatible = "db8500_vmodem";
-				};
-
-				// DB8500_REGULATOR_VPLL
-				db8500_vpll_reg: db8500_vpll {
-					regulator-compatible = "db8500_vpll";
-				};
-
-				// DB8500_REGULATOR_VSMPS1
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-compatible = "db8500_vsmps1";
-				};
-
-				// DB8500_REGULATOR_VSMPS2
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-compatible = "db8500_vsmps2";
-				};
-
-				// DB8500_REGULATOR_VSMPS3
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-compatible = "db8500_vsmps3";
-				};
-
-				// DB8500_REGULATOR_VRF1
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-compatible = "db8500_vrf1";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSP
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-compatible = "db8500_sva_mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-compatible = "db8500_sva_mmdsp_ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAPIPE
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-compatible = "db8500_sva_pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSP
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-compatible = "db8500_sia_mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAPIPE
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-compatible = "db8500_sia_pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SGA
-				db8500_sga_reg: db8500_sga {
-					regulator-compatible = "db8500_sga";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-compatible = "db8500_b2r2_mcde";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-compatible = "db8500_esram12";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12RET
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-compatible = "db8500_esram12_ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-compatible = "db8500_esram34";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34RET
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-compatible = "db8500_esram34_ret";
-				};
-			};
-
-			ab8500 {
-				compatible = "stericsson,ab8500";
-				interrupt-parent = <&intc>;
-				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				ab8500_gpio: ab8500-gpio {
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				ab8500-rtc {
-					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "60S", "ALARM";
-				};
-
-				ab8500-gpadc {
-					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "HW_CONV_END", "SW_CONV_END";
-					vddadc-supply = <&ab8500_ldo_tvout_reg>;
-				};
-
-				ab8500_battery: ab8500_battery {
-					stericsson,battery-type = "LIPO";
-					thermistor-on-batctrl;
-				};
-
-				ab8500_fg {
-					compatible = "stericsson,ab8500-fg";
-					battery	   = <&ab8500_battery>;
-				};
-
-				ab8500_btemp {
-					compatible = "stericsson,ab8500-btemp";
-					battery	   = <&ab8500_battery>;
-				};
-
-				ab8500_charger {
-					compatible	= "stericsson,ab8500-charger";
-					battery		= <&ab8500_battery>;
-					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-				};
-
-				ab8500_chargalg {
-					compatible	= "stericsson,ab8500-chargalg";
-					battery		= <&ab8500_battery>;
-				};
-
-				ab8500_usb {
-					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "ID_WAKEUP_R",
-							  "ID_WAKEUP_F",
-							  "VBUS_DET_F",
-							  "VBUS_DET_R",
-							  "USB_LINK_STATUS",
-							  "USB_ADP_PROBE_PLUG",
-							  "USB_ADP_PROBE_UNPLUG";
-					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
-					v-ape-supply = <&db8500_vape_reg>;
-					musb_1v8-supply = <&db8500_vsmps2_reg>;
-				};
-
-				ab8500-ponkey {
-					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-				};
-
-				ab8500-sysctrl {
-					compatible = "stericsson,ab8500-sysctrl";
-				};
-
-				ab8500-pwm {
-					compatible = "stericsson,ab8500-pwm";
-				};
-
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
-					compatible = "stericsson,ab8500-codec";
-
-					V-AUD-supply = <&ab8500_ldo_audio_reg>;
-					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
-					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
-					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
-
-					stericsson,earpeice-cmv = <950>; /* Units in mV. */
-				};
-
-				ext_regulators: ab8500-ext-regulators {
-					compatible = "stericsson,ab8500-ext-regulator";
-
-					ab8500_ext1_reg: ab8500_ext1 {
-						regulator-compatible = "ab8500_ext1";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-boot-on;
-						regulator-always-on;
-					};
-
-					ab8500_ext2_reg: ab8500_ext2 {
-						regulator-compatible = "ab8500_ext2";
-						regulator-min-microvolt = <1360000>;
-						regulator-max-microvolt = <1360000>;
-						regulator-boot-on;
-						regulator-always-on;
-					};
-
-					ab8500_ext3_reg: ab8500_ext3 {
-						regulator-compatible = "ab8500_ext3";
-						regulator-min-microvolt = <3400000>;
-						regulator-max-microvolt = <3400000>;
-						regulator-boot-on;
-					};
-				};
-
-				ab8500-regulators {
-					compatible = "stericsson,ab8500-regulator";
-					vin-supply = <&ab8500_ext3_reg>;
-
-					// supplies to the display/camera
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-compatible = "ab8500_ldo_aux1";
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2900000>;
-						regulator-boot-on;
-						/* BUG: If turned off MMC will be affected. */
-						regulator-always-on;
-					};
-
-					// supplies to the on-board eMMC
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-compatible = "ab8500_ldo_aux2";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for VAUX3; SDcard slots
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-compatible = "ab8500_ldo_aux3";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for v-intcore12; VINTCORE12 LDO
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-compatible = "ab8500_ldo_intcore";
-					};
-
-					// supply for tvout; gpadc; TVOUT LDO
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-compatible = "ab8500_ldo_tvout";
-					};
-
-					// supply for ab8500-usb; USB LDO
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-compatible = "ab8500_ldo_usb";
-					};
-
-					// supply for ab8500-vaudio; VAUDIO LDO
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-compatible = "ab8500_ldo_audio";
-					};
-
-					// supply for v-anamic1 VAMIC1 LDO
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-compatible = "ab8500_ldo_anamic1";
-					};
-
-					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-compatible = "ab8500_ldo_anamic2";
-					};
-
-					// supply for v-dmic; VDMIC LDO
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-compatible = "ab8500_ldo_dmic";
-					};
-
-					// supply for U8500 CSI/DSI; VANA LDO
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-compatible = "ab8500_ldo_ana";
-					};
-				};
-			};
-		};
-
-		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		ssp@80002000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80002000 0x1000>;
-			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
-			       <&dma 8 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		ssp@80003000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80003000 0x1000>;
-			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
-			       <&dma 9 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@8011a000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x8011a000 0x1000>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
-			       <&dma 0 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@80112000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80112000 0x1000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
-			       <&dma 35 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@80111000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80111000 0x1000>;
-			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
-			       <&dma 33 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@80129000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80129000 0x1000>;
-			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
-			       <&dma 40 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		uart@80120000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
-			       <&dma 13 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
-			clock-names = "uart", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		uart@80121000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
-			       <&dma 12 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
-			clock-names = "uart", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		uart@80007000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
-			       <&dma 11 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
-			clock-names = "uart", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi0_per1@80126000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
-			       <&dma 29 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi1_per2@80118000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
-			       <&dma 32 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi2_per3@80005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
-			       <&dma 28 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi3_per2@80119000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
-			       <&dma 41 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi4_per2@80114000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
-			       <&dma 42 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi5_per3@80008000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80008000 0x1000>;
-			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
-			       <&dma 43 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		msp0: msp@80123000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80123000 0x1000>;
-			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
-			       <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		msp1: msp@80124000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80124000 0x1000>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			/* This DMA channel only exist on DB8500 v1 */
-			dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
-			dma-names = "tx";
-
-			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		// HDMI sound
-		msp2: msp@80117000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80117000 0x1000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			dmas = <&dma 14 0 0x12>, /* Logical  - DevToMem - HighPrio */
-			       <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
-                                                    HighPrio - Fixed */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		msp3: msp@80125000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80125000 0x1000>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			/* This DMA channel only exist on DB8500 v2 */
-			dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
-			dma-names = "rx";
-
-			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		external-bus@50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x4000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000000>;
-			status = "disabled";
-		};
-
-		cpufreq-cooling {
-			compatible = "stericsson,db8500-cpufreq-cooling";
-			status = "disabled";
-		};
-
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-			enable-active-high;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-
-			status = "disabled";
-		};
-
-		mcde@a0350000 {
-			compatible = "stericsson,mcde";
-			reg = <0xa0350000 0x1000>, /* MCDE */
-			      <0xa0351000 0x1000>, /* DSI link 1 */
-			      <0xa0352000 0x1000>, /* DSI link 2 */
-			      <0xa0353000 0x1000>; /* DSI link 3 */
-			interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
-				 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
-				 <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
-				 <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */
-				 <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */
-				 <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */
-				 <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */
-				 <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */
-		};
-
-		cryp@a03cb000 {
-			compatible = "stericsson,ux500-cryp";
-			reg = <0xa03cb000 0x1000>;
-			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-
-			v-ape-supply = <&db8500_vape_reg>;
-			clocks = <&prcc_pclk 6 1>;
-		};
-
-		hash@a03c2000 {
-			compatible = "stericsson,ux500-hash";
-			reg = <0xa03c2000 0x1000>;
-
-			v-ape-supply = <&db8500_vape_reg>;
-			clocks = <&prcc_pclk 6 2>;
-		};
-	};
-};
diff --git a/src/arm/ste-href-ab8500.dtsi b/src/arm/ste-href-ab8500.dtsi
deleted file mode 100644
index 30f8601da323..000000000000
--- a/src/arm/ste-href-ab8500.dtsi
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * Copyright 2014 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	soc {
-		prcmu@80157000 {
-			ab8500 {
-				ab8500-gpio {
-					/* Hog a few default settings */
-					pinctrl-names = "default";
-					pinctrl-0 = <&gpio2_default_mode>,
-						    <&gpio4_default_mode>,
-						    <&gpio10_default_mode>,
-						    <&gpio11_default_mode>,
-						    <&gpio12_default_mode>,
-						    <&gpio13_default_mode>,
-						    <&gpio16_default_mode>,
-						    <&gpio24_default_mode>,
-						    <&gpio25_default_mode>,
-						    <&gpio36_default_mode>,
-						    <&gpio37_default_mode>,
-						    <&gpio38_default_mode>,
-						    <&gpio39_default_mode>,
-						    <&gpio42_default_mode>,
-						    <&gpio26_default_mode>,
-						    <&gpio35_default_mode>,
-						    <&ycbcr_default_mode>,
-						    <&pwm_default_mode>,
-						    <&adi1_default_mode>,
-						    <&usbuicc_default_mode>,
-						    <&dmic_default_mode>,
-						    <&extcpena_default_mode>,
-						    <&modsclsda_default_mode>;
-
-					/*
-					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
-					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
-					 */
-					gpio2 {
-						gpio2_default_mode: gpio2_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio2_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO2_T9";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio4 {
-						gpio4_default_mode: gpio4_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio4_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO4_W2";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio10 {
-						gpio10_default_mode: gpio10_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio10_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO10_U17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio11 {
-						gpio11_default_mode: gpio11_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio11_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO11_AA18";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio12 {
-						gpio12_default_mode: gpio12_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio12_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO12_U16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio13 {
-						gpio13_default_mode: gpio13_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio13_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO13_W17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio16 {
-						gpio16_default_mode: gpio16_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio16_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO16_F15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio24 {
-						gpio24_default_mode: gpio24_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio24_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO24_T14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio25 {
-						gpio25_default_mode: gpio25_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio25_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO25_R16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio36 {
-						gpio36_default_mode: gpio36_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio36_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO36_A17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio37 {
-						gpio37_default_mode: gpio37_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio37_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO37_E15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio38 {
-						gpio38_default_mode: gpio38_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio38_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO38_C17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio39 {
-						gpio39_default_mode: gpio39_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio39_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO39_E16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio42 {
-						gpio42_default_mode: gpio42_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio42_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO42_U2";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
-					 */
-					gpio26 {
-						gpio26_default_mode: gpio26_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio26_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO26_M16";
-								output-low;
-							};
-						};
-					};
-					gpio35 {
-						gpio35_default_mode: gpio35_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio35_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO35_W15";
-								output-low;
-							};
-						};
-					};
-					/*
-					 * This sets up the YCBCR connector pins, i.e. analog video out.
-					 * Set as input with no bias.
-					 */
-					ycbcr {
-						ycbcr_default_mode: ycbcr_default {
-							default_mux {
-								ste,function = "ycbcr";
-								ste,pins = "ycbcr0123_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO6_Y18",
-									 "GPIO7_AA20",
-									 "GPIO8_W18",
-									 "GPIO9_AA19";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					/* This sets up the PWM pins 14 and 15 */
-					pwm {
-						pwm_default_mode: pwm_default {
-							default_mux {
-								ste,function = "pwmout";
-								ste,pins = "pwmout1_d_1", "pwmout2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO14_F14",
-									 "GPIO15_B17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up audio interface 1 */
-					adi1 {
-						adi1_default_mode: adi1_default {
-							default_mux {
-								ste,function = "adi1";
-								ste,pins = "adi1_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO17_P5",
-									 "GPIO18_R5",
-									 "GPIO19_U5",
-									 "GPIO20_T5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up the USB UICC pins */
-					usbuicc {
-						usbuicc_default_mode: usbuicc_default {
-							default_mux {
-								ste,function = "usbuicc";
-								ste,pins = "usbuicc_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO21_H19",
-									 "GPIO22_G20",
-									 "GPIO23_G19";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up the microphone pins */
-					dmic {
-						dmic_default_mode: dmic_default {
-							default_mux {
-								ste,function = "dmic";
-								ste,pins = "dmic12_d_1",
-									 "dmic34_d_1",
-									 "dmic56_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO27_J6",
-									 "GPIO28_K6",
-									 "GPIO29_G6",
-									 "GPIO30_H6",
-									 "GPIO31_F5",
-									 "GPIO32_G5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					extcpena {
-						extcpena_default_mode: extcpena_default {
-							default_mux {
-								ste,function = "extcpena";
-								ste,pins = "extcpena_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO34_R17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* Modem I2C setup (SCL and SDA pins) */
-					modsclsda {
-						modsclsda_default_mode: modsclsda_default {
-							default_mux {
-								ste,function = "modsclsda";
-								ste,pins = "modsclsda_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO40_T19",
-									"GPIO41_U19";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Clock output pins associated with regulators.
-					 */
-					sysclkreq2 {
-						sysclkreq2_default_mode: sysclkreq2_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_T10";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq2_sleep_mode: sysclkreq2_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio1_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_T10";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					sysclkreq4 {
-						sysclkreq4_default_mode: sysclkreq4_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq4_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_U9";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq4_sleep_mode: sysclkreq4_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio3_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_U9";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-ab8505.dtsi b/src/arm/ste-href-ab8505.dtsi
deleted file mode 100644
index 6006d62086a2..000000000000
--- a/src/arm/ste-href-ab8505.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2014 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	soc {
-		prcmu@80157000 {
-			ab8505 {
-				ab8505-gpio {
-					/* Hog a few default settings */
-					pinctrl-names = "default";
-					pinctrl-0 = <&gpio2_default_mode>,
-						    <&gpio10_default_mode>,
-						    <&gpio11_default_mode>,
-						    <&gpio13_default_mode>,
-						    <&gpio34_default_mode>,
-						    <&gpio50_default_mode>,
-						    <&pwm_default_mode>,
-						    <&adi2_default_mode>,
-						    <&modsclsda_default_mode>,
-						    <&resethw_default_mode>,
-						    <&service_default_mode>;
-
-					/*
-					 * Pins 2, 10, 11, 13, 34 and 50
-					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
-					 */
-					gpio2 {
-						gpio2_default_mode: gpio2_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio2_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO2_R5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio10 {
-						gpio10_default_mode: gpio10_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio10_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO10_B16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio11 {
-						gpio11_default_mode: gpio11_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio11_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO11_B17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio13 {
-						gpio13_default_mode: gpio13_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio13_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO13_D17";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					gpio34 {
-						gpio34_default_mode: gpio34_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio34_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO34_H14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio50 {
-						gpio50_default_mode: gpio50_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio50_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO50_L4";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					/* This sets up the PWM pin 14 */
-					pwm {
-						pwm_default_mode: pwm_default {
-							default_mux {
-								ste,function = "pwmout";
-								ste,pins = "pwmout1_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO14_C16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up audio interface 2 */
-					adi2 {
-						adi2_default_mode: adi2_default {
-							default_mux {
-								ste,function = "adi2";
-								ste,pins = "adi2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO17_P2",
-									 "GPIO18_N3",
-									 "GPIO19_T1",
-									 "GPIO20_P3";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* Modem I2C setup (SCL and SDA pins) */
-					modsclsda {
-						modsclsda_default_mode: modsclsda_default {
-							default_mux {
-								ste,function = "modsclsda";
-								ste,pins = "modsclsda_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO40_J15",
-									"GPIO41_J14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					resethw {
-						resethw_default_mode: resethw_default {
-							default_mux {
-								ste,function = "resethw";
-								ste,pins = "resethw_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO52_D16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					service {
-						service_default_mode: service_default {
-							default_mux {
-								ste,function = "service";
-								ste,pins = "service_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO53_D15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Clock output pins associated with regulators.
-					 */
-					sysclkreq2 {
-						sysclkreq2_default_mode: sysclkreq2_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_N4";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq2_sleep_mode: sysclkreq2_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio1_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_N4";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					sysclkreq4 {
-						sysclkreq4_default_mode: sysclkreq4_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq4_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_P5";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq4_sleep_mode: sysclkreq4_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio3_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_P5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-family-pinctrl.dtsi b/src/arm/ste-href-family-pinctrl.dtsi
deleted file mode 100644
index addfcc7c2750..000000000000
--- a/src/arm/ste-href-family-pinctrl.dtsi
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * Copyright 2013 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "ste-nomadik-pinctrl.dtsi"
-
-/ {
-	soc {
-		pinctrl {
-			/* Settings for all UART default and sleep states */
-			uart0 {
-				uart0_default_mode: uart0_default {
-					default_mux {
-						ste,function = "u0";
-						ste,pins = "u0_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart0_sleep_mode: uart0_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO1_AJ3"; /* RTS */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-
-					sleep_cfg3 {
-						ste,pins = "GPIO3_AH3"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart1 {
-				uart1_default_mode: uart1_default {
-					default_mux {
-						ste,function = "u1";
-						ste,pins = "u1rxtx_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart1_sleep_mode: uart1_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart2 {
-				uart2_default_mode: uart2_default {
-					default_mux {
-						ste,function = "u2";
-						ste,pins = "u2rxtx_c_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart2_sleep_mode: uart2_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all I2C default and sleep states */
-			i2c0 {
-				i2c0_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c0";
-						ste,pins = "i2c0_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c0_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c1 {
-				i2c1_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c1";
-						ste,pins = "i2c1_b_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c1_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c2 {
-				i2c2_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c2";
-						ste,pins = "i2c2_b_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c2_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c3 {
-				i2c3_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c3";
-						ste,pins = "i2c3_c_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c3_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Activating I2C4 will conflict with UART1 about the same pins so do not
-			 * enable I2C4 and UART1 at the same time.
-			 */
-			i2c4 {
-				i2c4_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c4";
-						ste,pins = "i2c4_b_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c4_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all SPI default and sleep states */
-			spi2 {
-				spi2_default_mode: spi_default {
-					default_mux {
-						ste,function = "spi2";
-						ste,pins = "spi2_oc1_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO216_AG12"; /* FRM */
-						ste,config = <&gpio_out_hi>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO218_AH11"; /* RXD */
-						ste,config = <&in_pd>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO215_AH13", /* TXD */
-						"GPIO217_AH12"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-				};
-
-				spi2_idle_mode: spi_idle {
-					/*
-					 * The idle mode is basically sleep mode sans wakeups. Also
-					 * note that we have muxes the pins off the function here
-					 * as we do not state any muxing.
-					 */
-					idle_cfg1 {
-						ste,pins = "GPIO218_AH11"; /* RXD */
-						ste,config = <&slpm_in_pdis>;
-					};
-					idle_cfg2 {
-						ste,pins = "GPIO215_AH13"; /* TXD */
-						ste,config = <&slpm_out_lo_pdis>;
-					};
-					idle_cfg3 {
-						ste,pins = "GPIO217_AH12"; /* CLK */
-						ste,config = <&slpm_pdis>;
-					};
-				};
-
-				spi2_sleep_mode: spi_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO216_AG12", /* FRM */
-						"GPIO218_AH11"; /* RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins = "GPIO215_AH13"; /* TXD */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						ste,pins = "GPIO217_AH12"; /* CLK */
-						ste,config = <&slpm_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all MMC/SD/SDIO default and sleep states */
-			sdi0 {
-				/* This is the external SD card slot, 4 bits wide */
-				sdi0_default_mode: sdi0_default {
-					default_mux {
-						ste,function = "mc0";
-						ste,pins = "mc0_a_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&out_hi>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO22_AA3"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg4 {
-						ste,pins =
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi0_sleep_mode: sdi0_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO22_AA3", /* FBCLK */
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						ste,pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi1 {
-				/* This is the WLAN SDIO 4 bits wide */
-				sdi1_default_mode: sdi1_default {
-					default_mux {
-						ste,function = "mc1";
-						ste,pins = "mc1_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO209_AG15"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi1_sleep_mode: sdi1_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO209_AG15", /* FBCLK */
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi2 {
-				/* This is the eMMC 8 bits wide, usually PoP eMMC */
-				sdi2_default_mode: sdi2_default {
-					default_mux {
-						ste,function = "mc2";
-						ste,pins = "mc2_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO130_C8"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO129_B4", /* CMD */
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi2_sleep_mode: sdi2_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO130_C8", /* FBCLK */
-						"GPIO129_B4"; /* CMD */
-						ste,config = <&in_wkup_pdis_en>;
-					};
-					sleep_cfg3 {
-						ste,pins =
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi4 {
-				/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
-				sdi4_default_mode: sdi4_default {
-					default_mux {
-						ste,function = "mc4";
-						ste,pins = "mc4_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO202_AF25"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi4_sleep_mode: sdi4_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO202_AF25", /* FBCLK */
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
-			 * cannot be muxed onto any pins.
-			 */
-			msp0 {
-				msp0_default_mode: msp0_default {
-					default_msp0_mux {
-						ste,function = "msp0";
-						ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1";
-					};
-					default_msp0_cfg {
-						ste,pins =
-						"GPIO12_AC4", /* TXD */
-						"GPIO15_AC3", /* RXD */
-						"GPIO13_AF3", /* TFS */
-						"GPIO14_AE3"; /* TCK */
-						ste,config = <&in_nopull>;
-					};
-				};
-			};
-
-			msp1 {
-				msp1_default_mode: msp1_default {
-					default_mux {
-						ste,function = "msp1";
-						ste,pins = "msp1txrx_a_1", "msp1_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO33_AF2";
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins =
-						"GPIO34_AE1",
-						"GPIO35_AE2",
-						"GPIO36_AG2";
-						ste,config = <&in_nopull>;
-					};
-
-				};
-			};
-
-			msp2 {
-				msp2_default_mode: msp2_default {
-					/* MSP2 usually used for HDMI audio */
-					default_mux {
-						ste,function = "msp2";
-						ste,pins = "msp2_a_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO193_AH27", /* TXD */
-						"GPIO194_AF27", /* TCK */
-						"GPIO195_AG28"; /* TFS */
-						ste,config = <&in_pd>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO196_AG26"; /* RXD */
-						ste,config = <&out_lo>;
-					};
-				};
-			};
-
-
-			musb {
-				musb_default_mode: musb_default {
-					default_mux {
-						ste,function = "usb";
-						ste,pins = "usb_a_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29", /* DIR */
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				musb_sleep_mode: musb_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29"; /* DIR */
-						ste,config = <&slpm_wkup_pdis_en>;
-					};
-					sleep_cfg2 {
-						ste,pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						ste,pins =
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&slpm_in_wkup_pdis_en>;
-					};
-				};
-			};
-
-			mcde {
-				lcd_default_mode: lcd_default {
-					default_mux {
-						/* Mux in VSI0 and all the data lines */
-						ste,function = "lcd";
-						ste,pins =
-						"lcdvsi0_a_1", /* VSI0 for LCD */
-						"lcd_d0_d7_a_1", /* Data lines */
-						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
-						"lcdvsi1_a_1"; /* VSI1 for HDMI */
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO68_E1", /* VSI0 */
-						"GPIO69_E2"; /* VSI1 */
-						ste,config = <&in_pu>;
-					};
-				};
-				lcd_sleep_mode: lcd_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO69_E2"; /* VSI1 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			ske {
-				/* SKE keys on position 2 in an 8x8 matrix */
-				ske_kpa2_default_mode: ske_kpa2_default {
-					default_mux {
-						ste,function = "kp";
-						ste,pins = "kp_a_2";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO153_B17", /* I7 */
-						"GPIO154_C16", /* I6 */
-						"GPIO155_C19", /* I5 */
-						"GPIO156_C17", /* I4 */
-						"GPIO161_D21", /* I3 */
-						"GPIO162_D20", /* I2 */
-						"GPIO163_C20", /* I1 */
-						"GPIO164_B21"; /* I0 */
-						ste,config = <&in_pd>;
-					};
-					default_cfg2 {
-						ste,pins =
-						"GPIO157_A18", /* O7 */
-						"GPIO158_C18", /* O6 */
-						"GPIO159_B19", /* O5 */
-						"GPIO160_B20", /* O4 */
-						"GPIO165_C21", /* O3 */
-						"GPIO166_A22", /* O2 */
-						"GPIO167_B24", /* O1 */
-						"GPIO168_C22"; /* O0 */
-						ste,config = <&out_lo>;
-					};
-				};
-				ske_kpa2_sleep_mode: ske_kpa2_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO153_B17", /* I7 */
-						"GPIO154_C16", /* I6 */
-						"GPIO155_C19", /* I5 */
-						"GPIO156_C17", /* I4 */
-						"GPIO161_D21", /* I3 */
-						"GPIO162_D20", /* I2 */
-						"GPIO163_C20", /* I1 */
-						"GPIO164_B21"; /* I0 */
-						ste,config = <&slpm_in_pu_wkup_pdis_en>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO157_A18", /* O7 */
-						"GPIO158_C18", /* O6 */
-						"GPIO159_B19", /* O5 */
-						"GPIO160_B20", /* O4 */
-						"GPIO165_C21", /* O3 */
-						"GPIO166_A22", /* O2 */
-						"GPIO167_B24", /* O1 */
-						"GPIO168_C22"; /* O0 */
-						ste,config = <&slpm_out_lo_pdis>;
-					};
-				};
-				/*
-				 * SKE keys on position 1 and "other C1" combi giving
-				 * six rows of six keys.
-				 */
-				ske_kpaoc1_default_mode: ske_kpaoc1_default {
-					default_mux {
-						ste,function = "kp";
-						ste,pins = "kp_a_1", "kp_oc1_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO91_B6", /* KP_O0 */
-						"GPIO90_A3", /* KP_O1 */
-						"GPIO87_B3", /* KP_O2 */
-						"GPIO86_C6", /* KP_O3 */
-						"GPIO96_D8", /* KP_O6 */
-						"GPIO94_D7"; /* KP_O7 */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins =
-						"GPIO93_B7", /* KP_I0 */
-						"GPIO92_D6", /* KP_I1 */
-						"GPIO89_E6", /* KP_I2 */
-						"GPIO88_C4", /* KP_I3 */
-						"GPIO97_D9", /* KP_I6 */
-						"GPIO95_E8"; /* KP_I7 */
-						ste,config = <&in_pu>;
-					};
-				};
-			};
-
-			wlan {
-				wlan_default_mode: wlan_default {
-					/*
-					 * Activate this mode with the WLAN chip.
-					 * These are plain GPIO pins used by WLAN
-					 */
-					default_cfg1 {
-						ste,pins =
-						"GPIO226_AF8", /* WLAN_PMU_EN */
-						"GPIO85_D5"; /* WLAN_ENA */
-						ste,config = <&gpio_out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-stuib.dtsi b/src/arm/ste-href-stuib.dtsi
deleted file mode 100644
index 84d7c5d883f2..000000000000
--- a/src/arm/ste-href-stuib.dtsi
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		vdd-supply = <&ab8500_ldo_aux1_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
-
-		button@139 {
-			/* Proximity sensor */
-			gpios = <&gpio6 25 0x4>;
-			linux,code = <11>; /* SW_FRONT_PROXIMITY */
-			label = "SFH7741 Proximity Sensor";
-		};
-		button@145 {
-			/* Hall sensor */
-			gpios = <&gpio4 17 0x4>;
-			linux,code = <0>; /* SW_LID */
-			label = "HED54XXU11 Hall Effect Sensor";
-		};
-	};
-
-	soc {
-		i2c@80004000 {
-			stmpe1601: stmpe1601@40 {
-				compatible = "st,stmpe1601";
-				reg = <0x40>;
-				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-				interrupt-parent = <&gpio6>;
-				interrupt-controller;
-				vcc-supply = <&db8500_vsmps2_reg>;
-				vio-supply = <&db8500_vsmps2_reg>;
-
-				wakeup-source;
-				st,autosleep-timeout = <1024>;
-
-				stmpe_keypad {
-					compatible = "st,stmpe-keypad";
-
-					debounce-interval = <64>;
-					st,scan-count = <8>;
-					st,no-autorepeat;
-
-					linux,keymap = <0x205006b
-							0x4010074
-							0x3050072
-							0x1030004
-							0x502006a
-							0x500000a
-							0x5008b
-							0x706001c
-							0x405000b
-							0x6070003
-							0x3040067
-							0x303006c
-							0x60400e7
-							0x602009e
-							0x4020073
-							0x5050002
-							0x4030069
-							0x3020008>;
-				};
-			};
-		};
-
-		i2c@80110000 {
-			bu21013_tp@5c {
-				compatible = "rohm,bu21013_tp";
-				reg = <0x5c>;
-				avdd-supply = <&ab8500_ldo_aux1_reg>;
-
-				rohm,touch-max-x = <384>;
-				rohm,touch-max-y = <704>;
-				rohm,flip-y;
-			};
-
-			bu21013_tp@5d {
-				compatible = "rohm,bu21013_tp";
-				reg = <0x5d>;
-				avdd-supply = <&ab8500_ldo_aux1_reg>;
-
-				rohm,touch-max-x = <384>;
-				rohm,touch-max-y = <704>;
-				rohm,flip-y;
-			};
-		};
-
-		pinctrl {
-			prox {
-				prox_stuib_mode: prox_stuib {
-					stuib_cfg {
-						ste,pins = "GPIO217_AH12";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			hall {
-				hall_stuib_mode: stuib_tvk {
-					stuib_cfg {
-						ste,pins = "GPIO145_C13";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-tvk1281618.dtsi b/src/arm/ste-href-tvk1281618.dtsi
deleted file mode 100644
index 18b65d1b14f2..000000000000
--- a/src/arm/ste-href-tvk1281618.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the TVK1281618 UIB
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		vdd-supply = <&ab8500_ldo_aux1_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
-
-		button@139 {
-			/* Proximity sensor */
-			gpios = <&gpio6 25 0x4>;
-			linux,code = <11>; /* SW_FRONT_PROXIMITY */
-			label = "SFH7741 Proximity Sensor";
-		};
-		button@145 {
-			/* Hall sensor */
-			gpios = <&gpio4 17 0x4>;
-			linux,code = <0>; /* SW_LID */
-			label = "HED54XXU11 Hall Effect Sensor";
-		};
-	};
-
-	soc {
-		/* Add Synaptics touch screen, TC35893 keypad etc here */
-		i2c@80004000 {
-			tc35893@44 {
-				compatible = "toshiba,tc35893";
-				reg = <0x44>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&tc35893_tvk_mode>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-
-				tc3589x_gpio {
-					compatible = "toshiba,tc3589x-gpio";
-					interrupts = <0>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-				tc3589x_keypad {
-					compatible = "toshiba,tc3589x-keypad";
-					interrupts = <6>;
-					debounce-delay-ms = <4>;
-					keypad,num-columns = <8>;
-					keypad,num-rows = <8>;
-					linux,no-autorepeat;
-					linux,wakeup;
-					linux,keymap = <0x0301006b
-						        0x04010066
-							0x06040072
-							0x040200d7
-							0x0303006a
-							0x0205000e
-							0x0607008b
-							0x0500001c
-							0x0403000b
-							0x03040034
-							0x05020067
-							0x0305006c
-							0x040500e7
-							0x0005009e
-							0x06020073
-							0x01030039
-							0x07060069
-							0x050500d9>;
-				};
-			};
-		};
-		/* Sensors mounted on this board variant */
-		i2c@80128000 {
-			lsm303dlh@18 {
-				/* Accelerometer */
-				compatible = "st,lsm303dlh-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x18>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
-			};
-			lsm303dlm@1e {
-				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
-				reg = <0x1e>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&magneto_tvk_mode>;
-			};
-			l3g4200d@68 {
-				/* Gyroscope */
-				compatible = "st,l3g4200d-gyro";
-				st,drdy-int-pin = <2>;
-				reg = <0x68>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-			lsp001wm@5c {
-				/* Barometer/pressure sensor */
-				compatible = "st,lps001wp-press";
-				reg = <0x5c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-		};
-		pinctrl {
-			/* Pull up this GPIO pin */
-			tc35893 {
-				tc35893_tvk_mode: tc35893_tvk {
-					tvk_cfg {
-						ste,pins = "GPIO218_AH11";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			prox {
-				prox_tvk_mode: prox_tvk {
-					tvk_cfg {
-						ste,pins = "GPIO217_AH12";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			hall {
-				hall_tvk_mode: hall_tvk {
-					tvk_cfg {
-						ste,pins = "GPIO145_C13";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			accelerometer {
-				accel_tvk_mode: accel_tvk {
-					/* Accelerometer interrupt lines 1 & 2 */
-					tvk_cfg {
-						ste,pins = "GPIO82_C1", "GPIO83_D3";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			magnetometer {
-				magneto_tvk_mode: magneto_tvk {
-					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
-					tvk_cfg1 {
-						ste,pins = "GPIO31_V3";
-						ste,config = <&gpio_in_pu>;
-					};
-					tvk_cfg2 {
-						ste,pins = "GPIO32_V2";
-						ste,config = <&gpio_in_pd>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href.dtsi b/src/arm/ste-href.dtsi
deleted file mode 100644
index bf8f0eddc2c0..000000000000
--- a/src/arm/ste-href.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-family-pinctrl.dtsi"
-
-/ {
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc {
-		usb_per5@a03e0000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&musb_default_mode>;
-			pinctrl-1 = <&musb_sleep_mode>;
-		};
-
-		uart@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80121000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
-			status = "okay";
-		};
-
-		i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
-		};
-
-		i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
-		};
-
-		i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
-			lp5521@33 {
-				compatible = "national,lp5521";
-				reg = <0x33>;
-				label = "lp5521_pri";
-				clock-mode = /bits/ 8 <2>;
-				chan0 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-					linux,default-trigger = "heartbeat";
-				};
-				chan1 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-				chan2 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-			};
-			lp5521@34 {
-				compatible = "national,lp5521";
-				reg = <0x34>;
-				label = "lp5521_sec";
-				clock-mode = /bits/ 8 <2>;
-				chan0 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-				chan1 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-				chan2 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-			};
-			bh1780@29 {
-				compatible = "rohm,bh1780gli";
-				reg = <0x29>;
-			};
-		};
-
-		i2c@80110000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			full-pwr-cycle;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-cmd;
-			st,sig-pin-fbclk;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-			vqmmc-supply = <&vmmci>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			non-removable;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// PoP:ed eMMC
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			non-removable;
-			vmmc-supply = <&db8500_vsmps2_reg>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi2_default_mode>;
-			pinctrl-1 = <&sdi2_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			non-removable;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
-
-			status = "okay";
-		};
-
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-		};
-
-		msp0: msp@80123000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
-			status = "okay";
-		};
-
-		msp1: msp@80124000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
-			status = "okay";
-		};
-
-		msp2: msp@80117000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
-		};
-
-		msp3: msp@80125000 {
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			ab8500 {
-				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
-				};
-
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
-		mcde@a0350000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&lcd_default_mode>;
-			pinctrl-1 = <&lcd_sleep_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-hrefprev60-stuib.dts b/src/arm/ste-hrefprev60-stuib.dts
deleted file mode 100644
index 2b1cb5b584b6..000000000000
--- a/src/arm/ste-hrefprev60-stuib.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-hrefprev60.dtsi"
-#include "ste-href-stuib.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
-	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
-	soc {
-		/* Reset line for the BU21013 touchscreen */
-		i2c@80110000 {
-			/* Only one of these will be used */
-			bu21013_tp@5c {
-				touch-gpio = <&gpio2 12 0x4>;
-				reset-gpio = <&tc3589x_gpio 13 0x4>;
-			};
-			bu21013_tp@5d {
-				touch-gpio = <&gpio2 12 0x4>;
-				reset-gpio = <&tc3589x_gpio 13 0x4>;
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-hrefprev60-tvk.dts b/src/arm/ste-hrefprev60-tvk.dts
deleted file mode 100644
index 59523f866812..000000000000
--- a/src/arm/ste-hrefprev60-tvk.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-hrefprev60.dtsi"
-#include "ste-href-tvk1281618.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
-	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-};
diff --git a/src/arm/ste-hrefprev60.dtsi b/src/arm/ste-hrefprev60.dtsi
deleted file mode 100644
index abc762e24fcb..000000000000
--- a/src/arm/ste-hrefprev60.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the HREF+ prior to the v60 variant.
- */
-
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-ab8500.dtsi"
-#include "ste-href.dtsi"
-
-/ {
-	gpio_keys {
-		button@1 {
-			gpios = <&tc3589x_gpio 7 0x4>;
-		};
-	};
-
-	soc {
-		i2c@80004000 {
-			tps61052@33 {
-				compatible = "tps61052";
-				reg = <0x33>;
-			};
-
-			tc35892@42 {
-				compatible = "toshiba,tc35892";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&tc35892_hrefprev60_mode>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
-		ssp@80002000 {
-			/*
-			 * On the first generation boards, this SSP/SPI port was connected
-			 * to the AB8500.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&ssp0_hrefprev60_mode>;
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 0x4>;
-		};
-
-		vmmci: regulator-gpio {
-			gpios = <&tc3589x_gpio 18 0x4>;
-			enable-gpio = <&tc3589x_gpio 17 0x4>;
-		};
-
-		pinctrl {
-			/* Set this up using hogs */
-			pinctrl-names = "default";
-			pinctrl-0 = <&ipgpio_hrefprev60_mode>;
-
-			ssp0 {
-				ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
-					hrefprev60_mux {
-						ste,function = "ssp0";
-						ste,pins = "ssp0_a_1";
-					};
-					hrefprev60_cfg1 {
-						ste,pins = "GPIO145_C13"; /* RXD */
-						ste,config = <&in_pd>;
-					};
-
-				};
-			};
-			sdi0 {
-				/* This additional pin needed on early MOP500 and HREFs previous to v60 */
-				sdi0_default_mode: sdi0_default {
-					hrefprev60_mux {
-						ste,function = "mc0";
-						ste,pins = "mc0dat31dir_a_1";
-					};
-					hrefprev60_cfg1 {
-						ste,pins = "GPIO21_AB3"; /* DAT31DIR */
-						ste,config = <&out_hi>;
-					};
-
-				};
-			};
-			tc35892 {
-				tc35892_hrefprev60_mode: tc35892_hrefprev60 {
-					hrefprev60_cfg {
-						ste,pins = "GPIO217_AH12";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			ipgpio {
-				 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
-					hrefprev60_mux {
-						ste,function = "ipgpio";
-						ste,pins = "ipgpio0_c_1", "ipgpio1_c_1";
-					};
-					hrefprev60_cfg1 {
-						ste,pins = "GPIO6_AF6", "GPIO7_AG5";
-						ste,config = <&in_pu>;
-					};
-				 };
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-hrefv60plus-stuib.dts b/src/arm/ste-hrefv60plus-stuib.dts
deleted file mode 100644
index 8c6a2de56cf1..000000000000
--- a/src/arm/ste-hrefv60plus-stuib.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the HREF version 60 or later with the ST UIB
- */
-
-/dts-v1/;
-#include "ste-hrefv60plus.dtsi"
-#include "ste-href-stuib.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) and ST UIB";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	soc {
-		/* Reset line for the BU21013 touchscreen */
-		i2c@80110000 {
-			/* Only one of these will be used */
-			bu21013_tp@5c {
-				touch-gpio = <&gpio2 20 0x4>;
-				reset-gpio = <&gpio4 17 0x4>;
-			};
-			bu21013_tp@5d {
-				touch-gpio = <&gpio2 20 0x4>;
-				reset-gpio = <&gpio4 17 0x4>;
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-hrefv60plus-tvk.dts b/src/arm/ste-hrefv60plus-tvk.dts
deleted file mode 100644
index d53cccdce776..000000000000
--- a/src/arm/ste-hrefv60plus-tvk.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
- */
-
-/dts-v1/;
-#include "ste-hrefv60plus.dtsi"
-#include "ste-href-tvk1281618.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-};
diff --git a/src/arm/ste-hrefv60plus.dtsi b/src/arm/ste-hrefv60plus.dtsi
deleted file mode 100644
index bcc1f0c37f49..000000000000
--- a/src/arm/ste-hrefv60plus.dtsi
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-ab8500.dtsi"
-#include "ste-href.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	soc {
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			cd-gpios  = <&gpio2 31 0x4>; // 95
-		};
-
-		vmmci: regulator-gpio {
-			gpios = <&gpio0 5 0x4>;
-			enable-gpio = <&gpio5 9 0x4>;
-		};
-
-		pinctrl {
-			/*
-			 * Set this up using hogs, as time goes by and as seems fit, these
-			 * can be moved over to being controlled by respective device.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&ipgpio_hrefv60_mode>,
-				  <&etm_hrefv60_mode>,
-				  <&nahj_hrefv60_mode>,
-				  <&nfc_hrefv60_mode>,
-				  <&force_hrefv60_mode>,
-				  <&dipro_hrefv60_mode>,
-				  <&vaudio_hf_hrefv60_mode>,
-				  <&gbf_hrefv60_mode>,
-				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>;
-
-			sdi0 {
-				/* SD card detect GPIO pin, extend default state */
-				sdi0_default_mode: sdi0_default {
-					default_hrefv60_cfg1 {
-						ste,pins = "GPIO95_E8";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			ipgpio {
-				/*
-				 * XENON Flashgun on image processor GPIO (controlled from image
-				 * processor firmware), mux in these image processor GPIO lines 0
-				 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
-				 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
-				 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
-				 */
-				ipgpio_hrefv60_mode: ipgpio_hrefv60 {
-					hrefv60_mux {
-						ste,function = "ipgpio";
-						ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
-					};
-					hrefv60_cfg1 {
-						ste,pins = "GPIO6_AF6", "GPIO7_AG5";
-						ste,config = <&in_pu>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO21_AB3";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg3 {
-						ste,pins = "GPIO64_F3";
-						ste,config = <&out_lo>;
-					};
-				};
-			};
-			etm {
-				/*
-				 * Drive D19-D23 for the ETM PTM trace interface low,
-				 * (presumably pins are unconnected therefore grounded here,
-				 * the "other alt C1" setting enables these pins)
-				 */
-				etm_hrefv60_mode: etm_hrefv60 {
-					hrefv60_cfg1 {
-						ste,pins =
-						"GPIO70_G5",
-						"GPIO71_G4",
-						"GPIO72_H4",
-						"GPIO73_H3",
-						"GPIO74_J3";
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			nahj {
-				nahj_hrefv60_mode: nahj_hrefv60 {
-					/* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO76_J2";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO216_AG12";
-						ste,config = <&gpio_out_hi>;
-					};
-				 };
-			};
-			nfc {
-				nfc_hrefv60_mode: nfc_hrefv60 {
-					/* NFC ENA and RESET to low, pulldown IRQ line */
-					hrefv60_cfg1 {
-						ste,pins =
-						"GPIO77_H1", /* NFC_ENA */
-						"GPIO142_C11"; /* NFC_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO144_B13"; /* NFC_IRQ */
-						ste,config = <&gpio_in_pd>;
-					};
-				 };
-			};
-			force {
-				force_hrefv60_mode: force_hrefv60 {
-					hrefv60_cfg1 {
-						ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
-						ste,config = <&gpio_in_pu>;
-					};
-					hrefv60_cfg2 {
-						ste,pins =
-						"GPIO92_D6", /* FORCE_SENSING_RST */
-						"GPIO97_D9"; /* FORCE_SENSING_WU */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			dipro {
-				dipro_hrefv60_mode: dipro_hrefv60 {
-					hrefv60_cfg1 {
-						ste,pins = "GPIO139_C9"; /* DIPRO_INT */
-						ste,config = <&gpio_in_pu>;
-					};
-				 };
-			};
-			vaudio_hf {
-				vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
-					/* Audio Amplifier HF enable GPIO */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
-						ste,config = <&gpio_out_hi>;
-					};
-				 };
-			};
-			gbf {
-				gbf_hrefv60_mode: gbf_hrefv60 {
-					/*
-					 * GBF (GPS, Bluetooth, FM-radio) interface,
-					 * pull low to reset state
-					 */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			hdtv {
-				hdtv_hrefv60_mode: hdtv_hrefv60 {
-					/* MSP : HDTV INTERFACE GPIO line */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO192_AJ27";
-						ste,config = <&gpio_in_pd>;
-					};
-				 };
-			};
-			touch {
-				touch_hrefv60_mode: touch_hrefv60 {
-					/*
-					 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
-					 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
-					 * reset signals low.
-					 */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO143_D12", "GPIO146_D13";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO67_G2";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			mcde {
-				lcd_hrefv60_mode: lcd_hrefv60 {
-					/*
-					 * Display Interface 1 uses GPIO 65 for RST (reset).
-					 * Display Interface 2 uses GPIO 66 for RST (reset).
-					 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
-					 */
-					hrefv60_cfg1 {
-						ste,pins ="GPIO65_F1";
-						ste,config = <&gpio_out_hi>;
-					};
-					hrefv60_cfg2 {
-						ste,pins ="GPIO66_G3";
-						ste,config = <&gpio_out_lo>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-nomadik-pinctrl.dtsi b/src/arm/ste-nomadik-pinctrl.dtsi
deleted file mode 100644
index e6f22b266420..000000000000
--- a/src/arm/ste-nomadik-pinctrl.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <dt-bindings/pinctrl/nomadik.h>
-
-/ {
-	in_nopull: in_nopull {
-		ste,input = <INPUT_NOPULL>;
-	};
-
-	in_pu: input_pull_up {
-		ste,input = <INPUT_PULLUP>;
-	};
-
-	in_pd: input_pull_down {
-		ste,input = <INPUT_PULLDOWN>;
-	};
-
-	out_hi: output_high {
-		ste,output = <OUTPUT_HIGH>;
-	};
-
-	out_lo: output_low {
-		ste,output = <OUTPUT_LOW>;
-	};
-
-	gpio_in_pu: gpio_input_pull_up {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,input = <INPUT_PULLUP>;
-	};
-
-	gpio_in_pd: gpio_input_pull_down {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,input = <INPUT_PULLDOWN>;
-	};
-
-	gpio_out_lo: gpio_output_low {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,output = <OUTPUT_LOW>;
-	};
-
-	gpio_out_hi: gpio_output_high {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,output = <OUTPUT_HIGH>;
-	};
-
-	slpm_pdis: slpm_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_wkup_pdis: slpm_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_wkup_pdis_en: slpm_wkup_pdis_en {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	slpm_in_pu: slpm_in_pu {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_INPUT_PULLUP>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-	};
-
-	slpm_in_pdis: slpm_in_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_INPUT_PULLUP>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	slpm_out_lo: slpm_out_lo {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-	};
-
-	slpm_out_hi: slpm_out_hi {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-	};
-
-	slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_out_lo_pdis: slpm_out_lo_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_out_wkup_pdis: slpm_out_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_DIR_OUTPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	in_wkup_pdis: in_wkup_pdis {
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	in_wkup_pdis_en: in_wkup_pdis_en {
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	out_lo_wkup_pdis: out_lo_wkup_pdis {
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	out_hi_wkup_pdis: out_hi_wkup_pdis {
-		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	out_wkup_pdis: out_wkup_pdis {
-		ste,sleep-output = <SLPM_DIR_OUTPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-};
diff --git a/src/arm/ste-nomadik-s8815.dts b/src/arm/ste-nomadik-s8815.dts
deleted file mode 100644
index 90d8b6c7a205..000000000000
--- a/src/arm/ste-nomadik-s8815.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Device Tree for the ST-Ericsson Nomadik S8815 board
- * Produced by Calao Systems
- */
-
-/dts-v1/;
-#include "ste-nomadik-stn8815.dtsi"
-
-/ {
-	model = "Calao Systems USB-S8815";
-	compatible = "calaosystems,usb-s8815";
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
-	};
-
-	/* This is where the interrupt is routed on the S8815 board */
-	external-bus@34000000 {
-		ethernet@300 {
-			interrupt-parent = <&gpio3>;
-			interrupts = <8 0x1>;
-		};
-	};
-
-	src@101e0000 {
-		/* These chrystal drivers are not used on this board */
-		disable-sxtalo;
-		disable-mxtalo;
-	};
-
-	pinctrl {
-		/* Hog CD pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&cd_default_mode>;
-
-		mmcsd-cd {
-			cd_default_mode: cd_default {
-				cd_default_cfg1 {
-					/* CD input GPIO */
-					ste,pins = "GPIO111_H21";
-					ste,input = <0>;
-				};
-				cd_default_cfg2 {
-					/* CD GPIO biasing */
-					ste,pins = "GPIO112_J21";
-					ste,output = <0>;
-				};
-			};
-		};
-		user-led {
-			user_led_default_mode: user_led_default {
-				user_led_default_cfg {
-					ste,pins = "GPIO2_C5";
-					ste,output = <1>;
-				};
-			};
-		};
-		user-button {
-			user_button_default_mode: user_button_default {
-				user_button_default_cfg {
-					ste,pins = "GPIO3_A4";
-					ste,input = <0>;
-				};
-			};
-		};
-	};
-
-	/* Custom board node with GPIO pins to active etc */
-	usb-s8815 {
-		/* This will bias the MMC/SD card detect line */
-		mmcsd-gpio {
-			gpios = <&gpio3 16 0x1>;
-		};
-	};
-
-	/* The user LED on the board is set up to be used for heartbeat */
-	leds {
-		compatible = "gpio-leds";
-		user-led {
-			label = "user_led";
-			gpios = <&gpio0 2 0x1>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_led_default_mode>;
-		};
-	};
-
-	/* User key mapped in as "escape" */
-	gpio-keys {
-		compatible = "gpio-keys";
-		user-button {
-			label = "user_button";
-			gpios = <&gpio0 3 0x1>;
-			linux,code = <1>; /* KEY_ESC */
-			gpio-key,wakeup;
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_button_default_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-nomadik-stn8815.dtsi b/src/arm/ste-nomadik-stn8815.dtsi
deleted file mode 100644
index dbcf521b017f..000000000000
--- a/src/arm/ste-nomadik-stn8815.dtsi
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0x00000000 0x04000000>,
-		    <0x08000000 0x04000000>;
-	};
-
-	L2: l2-cache {
-		compatible = "arm,l210-cache";
-		reg = <0x10210000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <30>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	mtu0: mtu@101e2000 {
-		/* Nomadik system timer */
-		compatible = "st,nomadik-mtu";
-		reg = <0x101e2000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <4>;
-		clocks = <&timclk>, <&pclk>;
-		clock-names = "timclk", "apb_pclk";
-	};
-
-	mtu1: mtu@101e3000 {
-		/* Secondary timer */
-		reg = <0x101e3000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <5>;
-		clocks = <&timclk>, <&pclk>;
-		clock-names = "timclk", "apb_pclk";
-	};
-
-	gpio0: gpio@101e4000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e4000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <6>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <0>;
-		clocks = <&pclk>;
-	};
-
-	gpio1: gpio@101e5000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e5000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <7>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <1>;
-		clocks = <&pclk>;
-	};
-
-	gpio2: gpio@101e6000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e6000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <8>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <2>;
-		clocks = <&pclk>;
-	};
-
-	gpio3: gpio@101e7000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e7000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <9>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <3>;
-		clocks = <&pclk>;
-	};
-
-	pinctrl {
-		compatible = "stericsson,stn8815-pinctrl";
-		/* Pin configurations */
-		uart0 {
-			uart0_default_mux: uart0_mux {
-				u0_default_mux {
-					ste,function = "u0";
-					ste,pins = "u0_a_1";
-				};
-			};
-		};
-		uart1 {
-			uart1_default_mux: uart1_mux {
-				u1_default_mux {
-					ste,function = "u1";
-					ste,pins = "u1_a_1";
-				};
-			};
-		};
-		mmcsd {
-			mmcsd_default_mux: mmcsd_mux {
-				mmcsd_default_mux {
-					ste,function = "mmcsd";
-					ste,pins = "mmcsd_a_1";
-				};
-			};
-			mmcsd_default_mode: mmcsd_default {
-				mmcsd_default_cfg1 {
-					/* MCCLK */
-					ste,pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
-					ste,pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					ste,pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
-				};
-			};
-		};
-		i2c0 {
-			i2c0_default_mux: i2c0_mux {
-				i2c0_default_mux {
-					ste,function = "i2c0";
-					ste,pins = "i2c0_a_1";
-				};
-			};
-			i2c0_default_mode: i2c0_default {
-				i2c0_default_cfg {
-					ste,pins = "GPIO62_D3", "GPIO63_D2";
-					ste,input = <0>;
-				};
-			};
-		};
-		i2c1 {
-			i2c1_default_mux: i2c1_mux {
-				i2c1_default_mux {
-					ste,function = "i2c1";
-					ste,pins = "i2c1_a_1";
-				};
-			};
-			i2c1_default_mode: i2c1_default {
-				i2c1_default_cfg {
-					ste,pins = "GPIO53_L4", "GPIO54_L3";
-					ste,input = <0>;
-				};
-			};
-		};
-		i2c2 {
-			i2c2_default_mode: i2c2_default {
-				i2c2_default_cfg {
-					ste,pins = "GPIO73_C21", "GPIO74_C20";
-					ste,input = <0>;
-				};
-			};
-		};
-	};
-
-	src: src@101e0000 {
-		compatible = "stericsson,nomadik-src";
-		reg = <0x101e0000 0x1000>;
-		disable-sxtalo;
-		disable-mxtalo;
-
-		/*
-		 * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
-		 * that is parent of TIMCLK, PLL1 and PLL2
-		 */
-		mxtal: mxtal@19.2M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19200000>;
-		};
-
-		/*
-		 * The 2.4 MHz TIMCLK reference clock is active at
-		 * boot time, this is actually the MXTALCLK @19.2 MHz
-		 * divided by 8. This clock is used by the timers and
-		 * watchdog. See page 105 ff.
-		 */
-		timclk: timclk@2.4M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <8>;
-			clock-mult = <1>;
-			clocks = <&mxtal>;
-		};
-
-		/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
-		pll1: pll1@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-pll-clock";
-			pll-id = <1>;
-			clocks = <&mxtal>;
-		};
-
-		/* HCLK divides the PLL1 with 1,2,3 or 4 */
-		hclk: hclk@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-hclk-clock";
-			clocks = <&pll1>;
-		};
-		/* The PCLK domain uses HCLK right off */
-		pclk: pclk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&hclk>;
-		};
-
-		/* PLL2 is usually 864 MHz and divided into a few fixed rates */
-		pll2: pll2@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-pll-clock";
-			pll-id = <2>;
-			clocks = <&mxtal>;
-		};
-		clk216: clk216@216M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll2>;
-		};
-		clk108: clk108@108M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&clk216>;
-		};
-		clk72: clk72@72M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			/* The data sheet does not say how this is derived */
-			clock-div = <12>;
-			clock-mult = <1>;
-			clocks = <&pll2>;
-		};
-		clk48: clk48@48M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			/* The data sheet does not say how this is derived */
-			clock-div = <18>;
-			clock-mult = <1>;
-			clocks = <&pll2>;
-		};
-		clk27: clk27@27M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&clk108>;
-		};
-
-		/* This apparently exists as well */
-		ulpiclk: ulpiclk@60M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <60000000>;
-		};
-
-		/*
-		 * IP AMBA bus clocks, driving the bus side of the
-		 * peripheral clocking, clock gates.
-		 */
-
-		hclkdma0: hclkdma0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <0>;
-			clocks = <&hclk>;
-		};
-		hclksmc: hclksmc@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <1>;
-			clocks = <&hclk>;
-		};
-		hclksdram: hclksdram@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <2>;
-			clocks = <&hclk>;
-		};
-		hclkdma1: hclkdma1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <3>;
-			clocks = <&hclk>;
-		};
-		hclkclcd: hclkclcd@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <4>;
-			clocks = <&hclk>;
-		};
-		pclkirda: pclkirda@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <5>;
-			clocks = <&pclk>;
-		};
-		pclkssp: pclkssp@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <6>;
-			clocks = <&pclk>;
-		};
-		pclkuart0: pclkuart0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <7>;
-			clocks = <&pclk>;
-		};
-		pclksdi: pclksdi@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <8>;
-			clocks = <&pclk>;
-		};
-		pclki2c0: pclki2c0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <9>;
-			clocks = <&pclk>;
-		};
-		pclki2c1: pclki2c1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <10>;
-			clocks = <&pclk>;
-		};
-		pclkuart1: pclkuart1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <11>;
-			clocks = <&pclk>;
-		};
-		pclkmsp0: pclkmsp0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <12>;
-			clocks = <&pclk>;
-		};
-		hclkusb: hclkusb@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <13>;
-			clocks = <&hclk>;
-		};
-		hclkdif: hclkdif@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <14>;
-			clocks = <&hclk>;
-		};
-		hclksaa: hclksaa@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <15>;
-			clocks = <&hclk>;
-		};
-		hclksva: hclksva@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <16>;
-			clocks = <&hclk>;
-		};
-		pclkhsi: pclkhsi@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <17>;
-			clocks = <&pclk>;
-		};
-		pclkxti: pclkxti@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <18>;
-			clocks = <&pclk>;
-		};
-		pclkuart2: pclkuart2@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <19>;
-			clocks = <&pclk>;
-		};
-		pclkmsp1: pclkmsp1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <20>;
-			clocks = <&pclk>;
-		};
-		pclkmsp2: pclkmsp2@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <21>;
-			clocks = <&pclk>;
-		};
-		pclkowm: pclkowm@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <22>;
-			clocks = <&pclk>;
-		};
-		hclkhpi: hclkhpi@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <23>;
-			clocks = <&hclk>;
-		};
-		pclkske: pclkske@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <24>;
-			clocks = <&pclk>;
-		};
-		pclkhsem: pclkhsem@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <25>;
-			clocks = <&pclk>;
-		};
-		hclk3d: hclk3d@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <26>;
-			clocks = <&hclk>;
-		};
-		hclkhash: hclkhash@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <27>;
-			clocks = <&hclk>;
-		};
-		hclkcryp: hclkcryp@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <28>;
-			clocks = <&hclk>;
-		};
-		pclkmshc: pclkmshc@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <29>;
-			clocks = <&pclk>;
-		};
-		hclkusbm: hclkusbm@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <30>;
-			clocks = <&hclk>;
-		};
-		hclkrng: hclkrng@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <31>;
-			clocks = <&hclk>;
-		};
-
-		/* IP kernel clocks */
-		clcdclk: clcdclk@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <36>;
-			clocks = <&clk72 &clk48>;
-		};
-		irdaclk: irdaclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <37>;
-			clocks = <&clk48>;
-		};
-		sspiclk: sspiclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <38>;
-			clocks = <&clk48>;
-		};
-		uart0clk: uart0clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <39>;
-			clocks = <&clk48>;
-		};
-		sdiclk: sdiclk@48M {
-			/* Also called MCCLK in some documents */
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <40>;
-			clocks = <&clk48>;
-		};
-		i2c0clk: i2c0clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <41>;
-			clocks = <&clk48>;
-		};
-		i2c1clk: i2c1clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <42>;
-			clocks = <&clk48>;
-		};
-		uart1clk: uart1clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <43>;
-			clocks = <&clk48>;
-		};
-		mspclk0: mspclk0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <44>;
-			clocks = <&clk48>;
-		};
-		usbclk: usbclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <45>;
-			clocks = <&clk48>; /* 48 MHz not ULPI */
-		};
-		difclk: difclk@72M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <46>;
-			clocks = <&clk72>;
-		};
-		ipi2cclk: ipi2cclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <47>;
-			clocks = <&clk48>; /* Guess */
-		};
-		ipbmcclk: ipbmcclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <48>;
-			clocks = <&clk48>; /* Guess */
-		};
-		hsiclkrx: hsiclkrx@216M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <49>;
-			clocks = <&clk216>;
-		};
-		hsiclktx: hsiclktx@108M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <50>;
-			clocks = <&clk108>;
-		};
-		uart2clk: uart2clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <51>;
-			clocks = <&clk48>;
-		};
-		mspclk1: mspclk1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <52>;
-			clocks = <&clk48>;
-		};
-		mspclk2: mspclk2@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <53>;
-			clocks = <&clk48>;
-		};
-		owmclk: owmclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <54>;
-			clocks = <&clk48>; /* Guess */
-		};
-		skeclk: skeclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <56>;
-			clocks = <&clk48>; /* Guess */
-		};
-		x3dclk: x3dclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <58>;
-			clocks = <&clk48>; /* Guess */
-		};
-		pclkmsp3: pclkmsp3@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <59>;
-			clocks = <&pclk>;
-		};
-		mspclk3: mspclk3@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <60>;
-			clocks = <&clk48>;
-		};
-		mshcclk: mshcclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <61>;
-			clocks = <&clk48>; /* Guess */
-		};
-		usbmclk: usbmclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <62>;
-			/* Stated as "48 MHz not ULPI clock" */
-			clocks = <&clk48>;
-		};
-		rngcclk: rngcclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <63>;
-			clocks = <&clk48>; /* Guess */
-		};
-	};
-
-	/* A NAND flash of 128 MiB */
-	fsmc: flash@40000000 {
-		compatible = "stericsson,fsmc-nand";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10100000 0x1000>,	/* FSMC Register*/
-			<0x40000000 0x2000>,	/* NAND Base DATA */
-			<0x41000000 0x2000>,	/* NAND Base ADDR */
-			<0x40800000 0x2000>;	/* NAND Base CMD */
-		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-		clocks = <&hclksmc>;
-		status = "okay";
-		timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
-
-		partition@0 {
-		label = "X-Loader(NAND)";
-			reg = <0x0 0x40000>;
-		};
-		partition@40000 {
-			label = "MemInit(NAND)";
-			reg = <0x40000 0x40000>;
-		};
-		partition@80000 {
-			label = "BootLoader(NAND)";
-			reg = <0x80000 0x200000>;
-		};
-		partition@280000 {
-			label = "Kernel zImage(NAND)";
-			reg = <0x280000 0x300000>;
-		};
-		partition@580000 {
-			label = "Root Filesystem(NAND)";
-			reg = <0x580000 0x1600000>;
-		};
-		partition@1b80000 {
-			label = "User Filesystem(NAND)";
-			reg = <0x1b80000 0x6480000>;
-		};
-	};
-
-	external-bus@34000000 {
-		compatible = "simple-bus";
-		reg = <0x34000000 0x1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x34000000 0x1000000>;
-		ethernet@300 {
-			compatible = "smsc,lan91c111";
-			reg = <0x300 0x0fd00>;
-		};
-	};
-
-	/* I2C0 connected to the STw4811 power management chip */
-	i2c0 {
-		compatible = "st,nomadik-i2c", "arm,primecell";
-		reg = <0x101f8000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <20>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&i2c0clk>, <&pclki2c0>;
-		clock-names = "mclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
-
-		stw4811@2d {
-			compatible = "st,stw4811";
-			reg = <0x2d>;
-			vmmc_regulator: vmmc {
-				compatible = "st,stw481x-vmmc";
-				regulator-name = "VMMC";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-
-	/* I2C1 connected to various sensors */
-	i2c1 {
-		compatible = "st,nomadik-i2c", "arm,primecell";
-		reg = <0x101f7000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <21>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&i2c1clk>, <&pclki2c1>;
-		clock-names = "mclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
-
-		camera@2d {
-			   compatible = "st,camera";
-			   reg = <0x10>;
-		};
-		stw5095@1a {
-			   compatible = "st,stw5095";
-			   reg = <0x1a>;
-		};
-		lis3lv02dl@1d {
-			   compatible = "st,lis3lv02dl";
-			   reg = <0x1d>;
-		};
-	};
-
-	/* I2C2 connected to the USB portions of the STw4811 only */
-	i2c2 {
-		compatible = "i2c-gpio";
-		gpios = <&gpio2 10 0>, /* sda */
-			<&gpio2 9 0>; /* scl */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_default_mode>;
-
-		stw4811@2d {
-			   compatible = "st,stw4811-usb";
-			   reg = <0x2d>;
-		};
-	};
-
-	amba {
-		compatible = "arm,amba-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vica: intc@10140000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10140000 0x20>;
-		};
-
-		vicb: intc@10140020 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10140020 0x20>;
-		};
-
-		uart0: uart@101fd000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101fd000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <12>;
-			clocks = <&uart0clk>, <&pclkuart0>;
-			clock-names = "uartclk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_default_mux>;
-		};
-
-		uart1: uart@101fb000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101fb000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <17>;
-			clocks = <&uart1clk>, <&pclkuart1>;
-			clock-names = "uartclk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_default_mux>;
-		};
-
-		uart2: uart@101f2000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f2000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <28>;
-			clocks = <&uart2clk>, <&pclkuart2>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		rng: rng@101b0000 {
-			compatible = "arm,primecell";
-			reg = <0x101b0000 0x1000>;
-			clocks = <&rngcclk>, <&hclkrng>;
-			clock-names = "rng", "apb_pclk";
-		};
-
-		rtc: rtc@101e8000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x101e8000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			interrupt-parent = <&vica>;
-			interrupts = <10>;
-		};
-
-		mmcsd: sdi@101f6000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x101f6000 0x1000>;
-			clocks = <&sdiclk>, <&pclksdi>;
-			clock-names = "mclk", "apb_pclk";
-			interrupt-parent = <&vica>;
-			interrupts = <22>;
-			max-frequency = <48000000>;
-			bus-width = <4>;
-			cap-mmc-highspeed;
-			cap-sd-highspeed;
-			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
-			vmmc-supply = <&vmmc_regulator>;
-		};
-	};
-};
diff --git a/src/arm/ste-snowball.dts b/src/arm/ste-snowball.dts
deleted file mode 100644
index 4a2000c620ad..000000000000
--- a/src/arm/ste-snowball.dts
+++ /dev/null
@@ -1,526 +0,0 @@
-/*
- * Copyright 2011 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-ab8500.dtsi"
-#include "ste-href-family-pinctrl.dtsi"
-
-/ {
-	model = "Calao Systems Snowball platform with device tree";
-	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	en_3v3_reg: en_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "en-3v3-fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
-		gpio = <&ab8500_gpio 25 0x4>;
-		startup-delay-us = <5000>;
-		enable-active-high;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <2>;
-			label = "userpb";
-			gpios = <&gpio1 0 0x4>;
-		};
-		button@2 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <3>;
-			label = "extkb1";
-			gpios = <&gpio4 23 0x4>;
-		};
-		button@3 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <4>;
-			label = "extkb2";
-			gpios = <&gpio4 24 0x4>;
-		};
-		button@4 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <5>;
-			label = "extkb3";
-			gpios = <&gpio5 1 0x4>;
-		};
-		button@5 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <6>;
-			label = "extkb4";
-			gpios = <&gpio5 2 0x4>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpioled_snowball_mode>;
-		used-led {
-			label = "user_led";
-			gpios = <&gpio4 14 0x4>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		usb_per5@a03e0000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&musb_default_mode>;
-			pinctrl-1 = <&musb_sleep_mode>;
-		};
-
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-		};
-
-		msp0: msp@80123000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
-			status = "okay";
-		};
-
-		msp1: msp@80124000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
-			status = "okay";
-		};
-
-		msp2: msp@80117000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
-		};
-
-		msp3: msp@80125000 {
-			status = "okay";
-		};
-
-		external-bus@50000000 {
-			status = "okay";
-
-			ethernet@0 {
-				compatible = "smsc,lan9115";
-				reg = <0 0x10000>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-				interrupt-parent = <&gpio4>;
-				vdd33a-supply = <&en_3v3_reg>;
-				vddvario-supply = <&db8500_vape_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&eth_snowball_mode>;
-
-				reg-shift = <1>;
-				reg-io-width = <2>;
-				smsc,force-internal-phy;
-				smsc,irq-active-high;
-				smsc,irq-push-pull;
-
-				clocks = <&prcc_pclk 3 0>;
-			};
-		};
-
-		vmmci: regulator-gpio {
-			gpios = <&gpio7 4 0x4>;
-			enable-gpio = <&gpio6 25 0x4>;
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-			vqmmc-supply = <&vmmci>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
-
-			cd-gpios  = <&gpio6 26 0x4>; // 218
-			cd-inverted;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// Unused PoP eMMC - register and put it to sleep by default */
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdi2_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
-
-			status = "okay";
-		};
-
-		uart@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80121000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
-			status = "okay";
-		};
-
-		i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
-		};
-
-		i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
-		};
-
-		i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
-			lsm303dlh@18 {
-				/* Accelerometer */
-				compatible = "st,lsm303dlh-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x18>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_snowball_mode>;
-			};
-			lsm303dlm@1e {
-				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
-				reg = <0x1e>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&magneto_snowball_mode>;
-			};
-			l3g4200d@68 {
-				/* Gyroscope */
-				compatible = "st,l3g4200d-gyro";
-				st,drdy-int-pin = <2>;
-				reg = <0x68>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-			lsp001wm@5c {
-				/* Barometer/pressure sensor */
-				compatible = "st,lps001wp-press";
-				reg = <0x5c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-		};
-
-		i2c@80110000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
-		};
-
-		ssp@80002000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ssp0_snowball_mode>;
-		};
-
-		cpufreq-cooling {
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			cpufreq {
-				status = "okay";
-			};
-
-			thermal@801573c0 {
-				num-trips = <4>;
-
-				trip0-temp = <70000>;
-				trip0-type = "active";
-				trip0-cdev-num = <1>;
-				trip0-cdev-name0 = "thermal-cpufreq-0";
-
-				trip1-temp = <75000>;
-				trip1-type = "active";
-				trip1-cdev-num = <1>;
-				trip1-cdev-name0 = "thermal-cpufreq-0";
-
-				trip2-temp = <80000>;
-				trip2-type = "active";
-				trip2-cdev-num = <1>;
-				trip2-cdev-name0 = "thermal-cpufreq-0";
-
-				trip3-temp = <85000>;
-				trip3-type = "critical";
-				trip3-cdev-num = <0>;
-
-				status = "okay";
-			};
-
-			ab8500 {
-				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
-				};
-
-				ext_regulators: ab8500-ext-regulators {
-					ab8500_ext1_reg: ab8500_ext1 {
-						regulator-name = "ab8500-ext-supply1";
-					};
-
-					ab8500_ext2_reg_reg: ab8500_ext2 {
-						regulator-name = "ab8500-ext-supply2";
-					};
-
-					ab8500_ext3_reg_reg: ab8500_ext3 {
-						regulator-name = "ab8500-ext-supply3";
-					};
-				};
-
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
-		pinctrl {
-			/*
-			 * Set this up using hogs, as time goes by and as seems fit, these
-			 * can be moved over to being controlled by respective device.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&gbf_snowball_mode>,
-				  <&wlan_snowball_mode>;
-
-			ethernet {
-				/*
-				 * Mux in "SM" which is used for the
-				 * SMSC911x Ethernet adapter
-				 */
-				eth_snowball_mode: eth_snowball {
-					snowball_mux {
-						ste,function = "sm";
-						ste,pins = "sm_b_1";
-					};
-					/* LAN IRQ pin */
-					snowball_cfg1 {
-						ste,pins = "GPIO140_B11";
-						ste,config = <&in_nopull>;
-					};
-					/* LAN reset pin */
-					snowball_cfg2 {
-						ste,pins = "GPIO141_C12";
-						ste,config = <&gpio_out_hi>;
-					};
-
-				};
-			};
-			sdi0 {
-				sdi0_default_mode: sdi0_default {
-					snowball_mux {
-						ste,function = "mc0";
-						ste,pins = "mc0dat31dir_a_1";
-					};
-					snowball_cfg1 {
-						ste,pins = "GPIO21_AB3"; /* DAT31DIR */
-						ste,config = <&out_hi>;
-					};
-
-				};
-			};
-			ssp0 {
-				ssp0_snowball_mode: ssp0_snowball_default {
-					snowball_mux {
-						ste,function = "ssp0";
-						ste,pins = "ssp0_a_1";
-					};
-					snowball_cfg1 {
-						ste,pins = "GPIO144_B13"; /* FRM */
-						ste,config = <&gpio_out_hi>;
-					};
-					snowball_cfg2 {
-						ste,pins = "GPIO145_C13"; /* RXD */
-						ste,config = <&in_pd>;
-					};
-					snowball_cfg3 {
-						ste,pins =
-						"GPIO146_D13", /* TXD */
-						"GPIO143_D12"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-
-				};
-			};
-			gpio_led {
-				gpioled_snowball_mode: gpioled_default {
-					snowball_cfg1 {
-						ste,pins = "GPIO142_C11";
-						ste,config = <&gpio_out_hi>;
-					};
-
-				};
-			};
-			accelerometer {
-				accel_snowball_mode: accel_snowball {
-					/* Accelerometer lines */
-					snowball_cfg1 {
-						ste,pins =
-						"GPIO163_C20", /* ACCEL_IRQ1 */
-						"GPIO164_B21"; /* ACCEL_IRQ2 */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			magnetometer {
-				magneto_snowball_mode: magneto_snowball {
-					snowball_cfg1 {
-						ste,pins = "GPIO165_C21"; /* MAG_DRDY */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			gbf {
-				gbf_snowball_mode: gbf_snowball {
-					/*
-					 * GBF (GPS, Bluetooth, FM-radio) interface,
-					 * pull low to reset state
-					 */
-					snowball_cfg1 {
-						ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			wlan {
-				wlan_snowball_mode: wlan_snowball {
-					/*
-					 * Activate this mode with the WLAN chip.
-					 * These are plain GPIO pins used by WLAN
-					 */
-					snowball_cfg1 {
-						ste,pins =
-						"GPIO161_D21", /* WLAN_PMU_EN */
-						"GPIO215_AH13"; /* WLAN_ENA */
-						ste,config = <&gpio_out_lo>;
-					};
-					snowball_cfg2 {
-						ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-
-		mcde@a0350000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&lcd_default_mode>;
-			pinctrl-1 = <&lcd_sleep_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-u300.dts b/src/arm/ste-u300.dts
deleted file mode 100644
index 82a661677e97..000000000000
--- a/src/arm/ste-u300.dts
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * Device Tree for the ST-Ericsson U300 Machine and SoC
- */
-
-/dts-v1/;
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "ST-Ericsson U300";
-	compatible = "stericsson,u300";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk";
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-        };
-
-	memory {
-		reg = <0x48000000 0x03c00000>;
-	};
-
-	s365 {
-		compatible = "stericsson,s365";
-		vana15-supply = <&ab3100_ldo_d_reg>;
-		syscon = <&syscon>;
-	};
-
-	syscon: syscon@c0011000 {
-		compatible = "stericsson,u300-syscon", "syscon";
-		reg = <0xc0011000 0x1000>;
-		clk32: app_32_clk@32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-		pll13: pll13@13M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-		/* Slow bridge clocks under PLL13 */
-		slow_clk: slow_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <0>;
-			clocks = <&pll13>;
-		};
-		uart0_clk: uart0_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <1>;
-			clocks = <&slow_clk>;
-		};
-		gpio_clk: gpio_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <4>;
-			clocks = <&slow_clk>;
-		};
-		rtc_clk: rtc_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <6>;
-			clocks = <&slow_clk>;
-		};
-		apptimer_clk: app_tmr_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <7>;
-			clocks = <&slow_clk>;
-		};
-		acc_tmr_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <8>;
-			clocks = <&slow_clk>;
-		};
-		pll208: pll208@208M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-		app208: app_208_clk@208M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&pll208>;
-		};
-		cpu_clk@208M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <3>;
-			clocks = <&app208>;
-		};
-		app104: app_104_clk@104M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll208>;
-		};
-		semi_clk@104M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <9>;
-			clocks = <&app104>;
-		};
-		app52: app_52_clk@52M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll208>;
-		};
-		/* AHB subsystem clocks */
-		ahb_clk: ahb_subsys_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <10>;
-			clocks = <&app52>;
-		};
-		intcon_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <12>;
-			clocks = <&ahb_clk>;
-		};
-		emif_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <5>;
-			clocks = <&ahb_clk>;
-		};
-		dmac_clk: dmac_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <4>;
-			clocks = <&app52>;
-		};
-		fsmc_clk: fsmc_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <6>;
-			clocks = <&app52>;
-		};
-		xgam_clk: xgam_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <8>;
-			clocks = <&app52>;
-		};
-		app26: app_26_clk@26M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&app52>;
-		};
-		/* Fast bridge  clocks */
-		fast_clk: fast_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <0>;
-			clocks = <&app26>;
-		};
-		i2c0_clk: i2c0_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <1>;
-			clocks = <&fast_clk>;
-		};
-		i2c1_clk: i2c1_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <2>;
-			clocks = <&fast_clk>;
-		};
-		mmc_pclk: mmc_p_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <5>;
-			clocks = <&fast_clk>;
-		};
-		mmc_mclk: mmc_mclk {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-mclk";
-			clocks = <&mmc_pclk>;
-		};
-		spi_clk: spi_p_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <6>;
-			clocks = <&fast_clk>;
-		};
-	};
-
-	timer: timer@c0014000 {
-		compatible = "stericsson,u300-apptimer";
-		reg = <0xc0014000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <24 25 26 27>;
-		clocks = <&apptimer_clk>;
-	};
-
-	gpio: gpio@c0016000 {
-		compatible = "stericsson,gpio-coh901";
-		reg = <0xc0016000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <0 1 2 18 21 22 23>;
-		clocks = <&gpio_clk>;
-		interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3",
-				"gpio4", "gpio5", "gpio6";
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pinctrl: pinctrl@c0011000 {
-		compatible = "stericsson,pinctrl-u300";
-		reg = <0xc0011000 0x1000>;
-	};
-
-	watchdog: watchdog@c0012000 {
-		compatible = "stericsson,coh901327";
-		reg = <0xc0012000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <3>;
-		clocks = <&clk32>;
-	};
-
-	rtc: rtc@c0017000 {
-		compatible = "stericsson,coh901331";
-		reg = <0xc0017000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <10>;
-		clocks = <&rtc_clk>;
-	};
-
-	dmac: dma-controller@c00020000 {
-		compatible = "stericsson,coh901318";
-		reg = <0xc0020000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <2>;
-		#dma-cells = <1>;
-		dma-channels = <40>;
-		clocks = <&dmac_clk>;
-	};
-
-	/* A NAND flash of 128 MiB */
-	fsmc: flash@40000000 {
-		compatible = "stericsson,fsmc-nand";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x9f800000 0x1000>,	/* FSMC Register*/
-			<0x80000000 0x4000>,	/* NAND Base DATA */
-			<0x80020000 0x4000>,	/* NAND Base ADDR */
-			<0x80010000 0x4000>;	/* NAND Base CMD */
-		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-		nand-skip-bbtscan;
-		clocks = <&fsmc_clk>;
-
-		partition@0 {
-		label = "boot records";
-			reg = <0x0 0x20000>;
-		};
-		partition@20000 {
-			label = "free";
-			reg = <0x20000 0x7e0000>;
-		};
-		partition@800000 {
-			label = "platform";
-			reg = <0x800000 0xf800000>;
-		};
-	};
-
-	i2c0: i2c@c0004000 {
-		compatible = "st,ddci2c";
-		reg = <0xc0004000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <8>;
-		clocks = <&i2c0_clk>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		ab3100: ab3100@48 {
-			compatible = "stericsson,ab3100";
-			reg = <0x48>;
-			interrupt-parent = <&vica>;
-			interrupts = <0>; /* EXT0 IRQ */
-			ab3100-regulators {
-				compatible = "stericsson,ab3100-regulators";
-				ab3100_ldo_a_reg: ab3100_ldo_a {
-					regulator-compatible = "ab3100_ldo_a";
-					startup-delay-us = <200>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-				ab3100_ldo_c_reg: ab3100_ldo_c {
-					regulator-compatible = "ab3100_ldo_c";
-					startup-delay-us = <200>;
-				};
-				ab3100_ldo_d_reg: ab3100_ldo_d {
-					regulator-compatible = "ab3100_ldo_d";
-					startup-delay-us = <200>;
-				};
-				ab3100_ldo_e_reg: ab3100_ldo_e {
-					regulator-compatible = "ab3100_ldo_e";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					startup-delay-us = <200>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-				ab3100_ldo_f_reg: ab3100_ldo_f {
-					regulator-compatible = "ab3100_ldo_f";
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					startup-delay-us = <600>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-				ab3100_ldo_g_reg: ab3100_ldo_g {
-					regulator-compatible = "ab3100_ldo_g";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <2850000>;
-					startup-delay-us = <400>;
-				};
-				ab3100_ldo_h_reg: ab3100_ldo_h {
-					regulator-compatible = "ab3100_ldo_h";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <2750000>;
-					startup-delay-us = <200>;
-				};
-				ab3100_ldo_k_reg: ab3100_ldo_k {
-					regulator-compatible = "ab3100_ldo_k";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2750000>;
-					startup-delay-us = <200>;
-				};
-				ab3100_ext_reg: ab3100_ext {
-					regulator-compatible = "ab3100_ext";
-				};
-				ab3100_buck_reg: ab3100_buck {
-					regulator-compatible = "ab3100_buck";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1800000>;
-					startup-delay-us = <1000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	i2c1: i2c@c0005000 {
-		compatible = "st,ddci2c";
-		reg = <0xc0005000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <9>;
-		clocks = <&i2c1_clk>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fwcam0: fwcam@10 {
-			reg = <0x10>;
-		};
-		fwcam1: fwcam@5d {
-			reg = <0x5d>;
-		};
-	};
-
-	amba {
-		compatible = "arm,amba-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vica: interrupt-controller@a0001000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xa0001000 0x20>;
-		};
-
-		vicb: interrupt-controller@a0002000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xa0002000 0x20>;
-		};
-
-		uart0: serial@c0013000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xc0013000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <22>;
-			clocks = <&uart0_clk>, <&uart0_clk>;
-			clock-names = "apb_pclk", "uart0_clk";
-			dmas = <&dmac 17 &dmac 18>;
-			dma-names = "tx", "rx";
-		};
-
-		uart1: serial@c0007000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xc0007000 0x1000>;
-			interrupt-parent = <&vicb>;
-			interrupts = <20>;
-			dmas = <&dmac 38 &dmac 39>;
-			dma-names = "tx", "rx";
-		};
-
-		mmcsd: mmcsd@c0001000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0xc0001000 0x1000>;
-			interrupt-parent = <&vicb>;
-			interrupts = <6 7>;
-			clocks = <&mmc_pclk>, <&mmc_mclk>;
-			clock-names = "apb_pclk", "mclk";
-			max-frequency = <24000000>;
-			bus-width = <4>; // SD-card slot
-			cap-mmc-highspeed;
-			cap-sd-highspeed;
-			cd-gpios = <&gpio 12 0x4>;
-			cd-inverted;
-			vmmc-supply = <&ab3100_ldo_g_reg>;
-			dmas = <&dmac 14>;
-			dma-names = "rx";
-		};
-
-		spi: ssp@c0006000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xc0006000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <23>;
-			clocks = <&spi_clk>, <&spi_clk>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dmac 27 &dmac 28>;
-			dma-names = "tx", "rx";
-			num-cs = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			spi-dummy@1 {
-				compatible = "arm,pl022-dummy";
-				reg = <1>;
-				spi-max-frequency = <20000000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/stih407-b2120.dts b/src/arm/stih407-b2120.dts
deleted file mode 100644
index fe69f92e5f82..000000000000
--- a/src/arm/stih407-b2120.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih407.dtsi"
-/ {
-	model = "STiH407 B2120";
-	compatible = "st,stih407-b2120", "st,stih407";
-
-	chosen {
-		bootargs = "console=ttyAS0,115200";
-		linux,stdout-path = &sbc_serial0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		ttyAS0 = &sbc_serial0;
-	};
-
-	soc {
-		sbc_serial0: serial@9530000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			red {
-				#gpio-cells = <2>;
-				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
-				linux,default-trigger = "heartbeat";
-			};
-			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
-				default-state = "off";
-			};
-		};
-
-		i2c@9842000 {
-			status = "okay";
-		};
-
-		i2c@9843000 {
-			status = "okay";
-		};
-
-		i2c@9844000 {
-			status = "okay";
-		};
-
-		i2c@9845000 {
-			status = "okay";
-		};
-
-		i2c@9540000 {
-			status = "okay";
-		};
-
-		/* SSC11 to HDMI */
-		i2c@9541000 {
-			status = "okay";
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-	};
-};
diff --git a/src/arm/stih407-clock.dtsi b/src/arm/stih407-clock.dtsi
deleted file mode 100644
index 800f46f009f3..000000000000
--- a/src/arm/stih407-clock.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics R&D Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/ {
-	clocks {
-		/*
-		 * Fixed 30MHz oscillator inputs to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: arm-periph-clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
-		};
-
-		/*
-		 * Bootloader initialized system infrastructure clock for
-		 * serial devices.
-		 */
-		clk_ext2f_a9: clockgen-c0@13 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <200000000>;
-			clock-output-names = "clk-s-icn-reg-0";
-		};
-	};
-};
diff --git a/src/arm/stih407-pinctrl.dtsi b/src/arm/stih407-pinctrl.dtsi
deleted file mode 100644
index 402844cb3152..000000000000
--- a/src/arm/stih407-pinctrl.dtsi
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		/* 0-5: PIO_SBC */
-		gpio0 = &pio0;
-		gpio1 = &pio1;
-		gpio2 = &pio2;
-		gpio3 = &pio3;
-		gpio4 = &pio4;
-		gpio5 = &pio5;
-		/* 10-19: PIO_FRONT0 */
-		gpio6 = &pio10;
-		gpio7 = &pio11;
-		gpio8 = &pio12;
-		gpio9 = &pio13;
-		gpio10 = &pio14;
-		gpio11 = &pio15;
-		gpio12 = &pio16;
-		gpio13 = &pio17;
-		gpio14 = &pio18;
-		gpio15 = &pio19;
-		/* 20: PIO_FRONT1 */
-		gpio16 = &pio20;
-		/* 30-35: PIO_REAR */
-		gpio17 = &pio30;
-		gpio18 = &pio31;
-		gpio19 = &pio32;
-		gpio20 = &pio33;
-		gpio21 = &pio34;
-		gpio22 = &pio35;
-		/* 40-42: PIO_FLASH */
-		gpio23 = &pio40;
-		gpio24 = &pio41;
-		gpio25 = &pio42;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-sbc-pinctrl";
-			st,syscfg = <&syscfg_sbc>;
-			reg = <0x0961f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09610000 0x6000>;
-
-			pio0: gpio@09610000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO0";
-			};
-			pio1: gpio@09611000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO1";
-			};
-			pio2: gpio@09612000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO2";
-			};
-			pio3: gpio@09613000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x100>;
-				st,bank-name = "PIO3";
-			};
-			pio4: gpio@09614000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x100>;
-				st,bank-name = "PIO4";
-			};
-
-			pio5: gpio@09615000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x100>;
-				st,bank-name = "PIO5";
-			};
-
-			rc {
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&pio4 0 ALT2 IN>;
-					};
-				};
-			};
-
-			/* SBC_ASC0 - UART10 */
-			sbc_serial0 {
-				pinctrl_sbc_serial0: sbc_serial0-0 {
-					st,pins {
-						tx = <&pio3 4 ALT1 OUT>;
-						rx = <&pio3 5 ALT1 IN>;
-					};
-				};
-			};
-			/* SBC_ASC1 - UART11 */
-			sbc_serial1 {
-				pinctrl_sbc_serial1: sbc_serial1-0 {
-					st,pins {
-						tx = <&pio2 6 ALT3 OUT>;
-						rx = <&pio2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			i2c10 {
-				pinctrl_i2c10_default: i2c10-default {
-					st,pins {
-						sda = <&pio4 6 ALT1 BIDIR>;
-						scl = <&pio4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c11 {
-				pinctrl_i2c11_default: i2c11-default {
-					st,pins {
-						sda = <&pio5 1 ALT1 BIDIR>;
-						scl = <&pio5 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&pio4 0 ALT6 IN>;
-						keyin1 = <&pio4 5 ALT4 IN>;
-						keyin2 = <&pio0 4 ALT2 IN>;
-						keyin3 = <&pio2 6 ALT2 IN>;
-
-						keyout0 = <&pio4 6 ALT4 OUT>;
-						keyout1 = <&pio1 7 ALT2 OUT>;
-						keyout2 = <&pio0 6 ALT2 OUT>;
-						keyout3 = <&pio2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			gmac1 {
-				/*
-				 * Almost all the boards based on STiH407 SoC have an embedded
-				 * switch where the mdio/mdc have been used for managing the SMI
-				 * iface via I2C. For this reason these lines can be allocated
-				 * by using dedicated configuration (in case of there will be a
-				 * standard PHY transceiver on-board).
-				 */
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-
-						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
-						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
-						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
-						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
-						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
-						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
-						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
-						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
-						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
-						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
-						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
-						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
-					};
-				};
-
-				pinctrl_rgmii1_mdio: rgmii1-mdio {
-					st,pins {
-						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
-						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
-						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
-					};
-				};
-
-				pinctrl_mii1: mii1 {
-					st,pins {
-						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
-						col = <&pio0 7 ALT1 IN BYPASS 1000>;
-
-						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
-						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
-						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
-						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
-						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
-					};
-				};
-			};
-
-			pwm1 {
-				pinctrl_pwm1_chan0_default: pwm1-0-default {
-					st,pins {
-						pwm-out = <&pio3 0 ALT1 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan1_default: pwm1-1-default {
-					st,pins {
-						pwm-out = <&pio4 4 ALT1 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan2_default: pwm1-2-default {
-					st,pins {
-						pwm-out = <&pio4 6 ALT3 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan3_default: pwm1-3-default {
-					st,pins {
-						pwm-out = <&pio4 7 ALT3 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-front-pinctrl";
-			st,syscfg = <&syscfg_front>;
-			reg = <0x0920f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09200000 0x10000>;
-
-			pio10: pio@09200000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO10";
-			};
-			pio11: pio@09201000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO11";
-			};
-			pio12: pio@09202000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO12";
-			};
-			pio13: pio@09203000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x100>;
-				st,bank-name = "PIO13";
-			};
-			pio14: pio@09204000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x100>;
-				st,bank-name = "PIO14";
-			};
-			pio15: pio@09205000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x100>;
-				st,bank-name = "PIO15";
-			};
-			pio16: pio@09206000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x6000 0x100>;
-				st,bank-name = "PIO16";
-			};
-			pio17: pio@09207000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x7000 0x100>;
-				st,bank-name = "PIO17";
-			};
-			pio18: pio@09208000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x8000 0x100>;
-				st,bank-name = "PIO18";
-			};
-			pio19: pio@09209000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x9000 0x100>;
-				st,bank-name = "PIO19";
-			};
-
-			/* Comms */
-			serial0 {
-				pinctrl_serial0: serial0-0 {
-					st,pins {
-						tx = <&pio17 0 ALT1 OUT>;
-						rx = <&pio17 1 ALT1 IN>;
-					};
-				};
-			};
-
-			serial1 {
-				pinctrl_serial1: serial1-0 {
-					st,pins {
-						tx = <&pio16 0 ALT1 OUT>;
-						rx = <&pio16 1 ALT1 IN>;
-					};
-				};
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx = <&pio15 0 ALT1 OUT>;
-						rx = <&pio15 1 ALT1 IN>;
-					};
-				};
-			};
-
-			mmc1 {
-				pinctrl_sd1: sd1-0 {
-					st,pins {
-						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
-						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
-						sd_led = <&pio16 6 ALT6 OUT>;
-						sd_pwren = <&pio16 7 ALT6 OUT>;
-						sd_cd = <&pio19 0 ALT6 IN>;
-						sd_wp = <&pio19 1 ALT6 IN>;
-					};
-				};
-			};
-
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&pio10 6 ALT2 BIDIR>;
-						scl = <&pio10 5 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&pio11 1 ALT2 BIDIR>;
-						scl = <&pio11 0 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			i2c2 {
-				pinctrl_i2c2_default: i2c2-default {
-					st,pins {
-						sda = <&pio15 6 ALT2 BIDIR>;
-						scl = <&pio15 5 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			i2c3 {
-				pinctrl_i2c3_default: i2c3-default {
-					st,pins {
-						sda = <&pio18 6 ALT1 BIDIR>;
-						scl = <&pio18 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			spi0 {
-				pinctrl_spi0_default: spi0-default {
-					st,pins {
-						mtsr = <&pio12 6 ALT2 BIDIR>;
-						mrst = <&pio12 7 ALT2 BIDIR>;
-						scl = <&pio12 5 ALT2 BIDIR>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front1 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-front-pinctrl";
-			st,syscfg = <&syscfg_front>;
-			reg = <0x0921f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09210000 0x10000>;
-
-			pio20: pio@09210000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO20";
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-rear-pinctrl";
-			st,syscfg = <&syscfg_rear>;
-			reg = <0x0922f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09220000 0x6000>;
-
-			pio30: gpio@09220000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO30";
-			};
-			pio31: gpio@09221000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO31";
-			};
-			pio32: gpio@09222000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO32";
-			};
-			pio33: gpio@09223000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x100>;
-				st,bank-name = "PIO33";
-			};
-			pio34: gpio@09224000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x100>;
-				st,bank-name = "PIO34";
-			};
-			pio35: gpio@09225000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x100>;
-				st,bank-name = "PIO35";
-			};
-
-			i2c4 {
-				pinctrl_i2c4_default: i2c4-default {
-					st,pins {
-						sda = <&pio30 1 ALT1 BIDIR>;
-						scl = <&pio30 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c5 {
-				pinctrl_i2c5_default: i2c5-default {
-					st,pins {
-						sda = <&pio34 4 ALT1 BIDIR>;
-						scl = <&pio34 3 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			usb3 {
-				pinctrl_usb3: usb3-2 {
-					st,pins {
-						usb-oc-detect = <&pio35 4 ALT1 IN>;
-						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
-						usb-vbus-valid = <&pio35 6 ALT1 IN>;
-					};
-				};
-			};
-
-			pwm0 {
-				pinctrl_pwm0_chan0_default: pwm0-0-default {
-					st,pins {
-						pwm-out = <&pio31 1 ALT1 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-flash {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-flash-pinctrl";
-			st,syscfg = <&syscfg_flash>;
-			reg = <0x0923f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09230000 0x3000>;
-
-			pio40: gpio@09230000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0 0x100>;
-				st,bank-name = "PIO40";
-			};
-			pio41: gpio@09231000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO41";
-			};
-			pio42: gpio@09232000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO42";
-			};
-
-			mmc0 {
-				pinctrl_mmc0: mmc0-0 {
-					st,pins {
-						emmc_clk = <&pio40 6 ALT1 BIDIR>;
-						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
-						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
-						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
-						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
-						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
-						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
-						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
-						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
-						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/stih407.dtsi b/src/arm/stih407.dtsi
deleted file mode 100644
index 4f9024f19866..000000000000
--- a/src/arm/stih407.dtsi
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih407-clock.dtsi"
-#include "stih407-pinctrl.dtsi"
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	intc: interrupt-controller@08761000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
-	};
-
-	scu@08760000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x08760000 0x1000>;
-	};
-
-	timer@08760200 {
-		interrupt-parent = <&intc>;
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x08760200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&arm_periph_clk>;
-	};
-
-	l2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0x08762000 0x1000>;
-		arm,data-latency = <3 3 3>;
-		arm,tag-latency = <2 2 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible = "simple-bus";
-
-		syscfg_sbc: sbc-syscfg@9620000 {
-			compatible = "st,stih407-sbc-syscfg", "syscon";
-			reg = <0x9620000 0x1000>;
-		};
-
-		syscfg_front: front-syscfg@9280000 {
-			compatible = "st,stih407-front-syscfg", "syscon";
-			reg = <0x9280000 0x1000>;
-		};
-
-		syscfg_rear: rear-syscfg@9290000 {
-			compatible = "st,stih407-rear-syscfg", "syscon";
-			reg = <0x9290000 0x1000>;
-		};
-
-		syscfg_flash: flash-syscfg@92a0000 {
-			compatible = "st,stih407-flash-syscfg", "syscon";
-			reg = <0x92a0000 0x1000>;
-		};
-
-		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
-			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
-			reg = <0x9600000 0x1000>;
-		};
-
-		syscfg_core: core-syscfg@92b0000 {
-			compatible = "st,stih407-core-syscfg", "syscon";
-			reg = <0x92b0000 0x1000>;
-		};
-
-		syscfg_lpm: lpm-syscfg@94b5100 {
-			compatible = "st,stih407-lpm-syscfg", "syscon";
-			reg = <0x94b5100 0x1000>;
-		};
-
-		serial@9830000 {
-			compatible = "st,asc";
-			reg = <0x9830000 0x2c>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_serial0>;
-			clocks = <&clk_ext2f_a9>;
-
-			status = "disabled";
-		};
-
-		serial@9831000 {
-			compatible = "st,asc";
-			reg = <0x9831000 0x2c>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_serial1>;
-			clocks = <&clk_ext2f_a9>;
-
-			status = "disabled";
-		};
-
-		serial@9832000 {
-			compatible = "st,asc";
-			reg = <0x9832000 0x2c>;
-			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_serial2>;
-			clocks = <&clk_ext2f_a9>;
-
-			status = "disabled";
-		};
-
-		/* SBC_ASC0 - UART10 */
-		sbc_serial0: serial@9530000 {
-			compatible = "st,asc";
-			reg = <0x9530000 0x2c>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sbc_serial0>;
-			clocks = <&clk_sysin>;
-
-			status = "disabled";
-		};
-
-		serial@9531000 {
-			compatible = "st,asc";
-			reg = <0x9531000 0x2c>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sbc_serial1>;
-			clocks = <&clk_sysin>;
-
-			status = "disabled";
-		};
-
-		i2c@9840000 {
-			compatible = "st,comms-ssc4-i2c";
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x9840000 0x110>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9841000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9841000 0x110>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9842000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9842000 0x110>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9843000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9843000 0x110>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9844000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9844000 0x110>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c4_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9845000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9845000 0x110>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c5_default>;
-
-			status = "disabled";
-		};
-
-
-		/* SSCs on SBC */
-		i2c@9540000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9540000 0x110>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_sysin>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c10_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9541000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9541000 0x110>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_sysin>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c11_default>;
-
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/stih415-b2000.dts b/src/arm/stih415-b2000.dts
deleted file mode 100644
index bdfbd3765db2..000000000000
--- a/src/arm/stih415-b2000.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih415.dtsi"
-#include "stih41x-b2000.dtsi"
-/ {
-	model = "STiH415 B2000 Board";
-	compatible = "st,stih415-b2000", "st,stih415";
-};
diff --git a/src/arm/stih415-b2020.dts b/src/arm/stih415-b2020.dts
deleted file mode 100644
index 71903a87bd31..000000000000
--- a/src/arm/stih415-b2020.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih415.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH415 B2020 Board";
-	compatible = "st,stih415-b2020", "st,stih415";
-};
diff --git a/src/arm/stih415-clock.dtsi b/src/arm/stih415-clock.dtsi
deleted file mode 100644
index 3ee34514bc4b..000000000000
--- a/src/arm/stih415-clock.dtsi
+++ /dev/null
@@ -1,533 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/stih415-clks.h>
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed 30MHz oscillator input to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ClockGenAs on SASG1
-		 */
-		clockgen-a@fee62000 {
-			reg = <0xfee62000 0xb48>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll0-hs",
-						     "clk-s-a0-pll0-ls",
-						     "clk-s-a0-pll1";
-			};
-
-			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-osc-prediv";
-			};
-
-			clk_s_a0_hs: clk-s-a0-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 0>, /* PLL0 HS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-fdma-0",
-						     "clk-s-fdma-1",
-						     ""; /* clk-s-jit-sense */
-						     /* Fourth output unused */
-			};
-
-			clk_s_a0_ls: clk-s-a0-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 1>, /* PLL0 LS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-reg-0",
-						     "clk-s-icn-if-0",
-						     "clk-s-icn-reg-lp-0",
-						     "clk-s-emiss",
-						     "clk-s-eth1-phy",
-						     "clk-s-mii-ref-out";
-						 /* Remaining outputs unused */
-			};
-		};
-
-		clockgen-a@fee81000 {
-			reg = <0xfee81000 0xb48>;
-
-			clk_s_a1_pll: clk-s-a1-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-pll0-hs",
-						     "clk-s-a1-pll0-ls",
-						     "clk-s-a1-pll1";
-			};
-
-			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-osc-prediv";
-			};
-
-			clk_s_a1_hs: clk-s-a1-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 0>, /* PLL0 HS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "", /* Reserved */
-						     "", /* Reserved */
-						     "clk-s-stac-phy",
-						     "clk-s-vtac-tx-phy";
-			};
-
-			clk_s_a1_ls: clk-s-a1-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 1>, /* PLL0 LS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-if-2",
-						     "clk-s-card-mmc",
-						     "clk-s-icn-if-1",
-						     "clk-s-gmac0-phy",
-						     "clk-s-nand-ctrl",
-						     "", /* Reserved */
-						     "clk-s-mii0-ref-out",
-						     ""; /* clk-s-stac-sys */
-						 /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * ClockGenAs on MPE41
-		 */
-		clockgen-a@fde12000 {
-			reg = <0xfde12000 0xb50>;
-
-			clk_m_a0_pll0: clk-m-a0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll0-phi0",
-						     "clk-m-a0-pll0-phi1",
-						     "clk-m-a0-pll0-phi2",
-						     "clk-m-a0-pll0-phi3";
-			};
-
-			clk_m_a0_pll1: clk-m-a0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll1-phi0",
-						     "clk-m-a0-pll1-phi1",
-						     "clk-m-a0-pll1-phi2",
-						     "clk-m-a0-pll1-phi3";
-			};
-
-			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-osc-prediv";
-			};
-
-			clk_m_a0_div0: clk-m-a0-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-apb-pm", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-pp-dmu-0",
-						     "clk-m-pp-dmu-1",
-						     "clk-m-icm-disp",
-						     ""; /* Unused */
-			};
-
-			clk_m_a0_div1: clk-m-a0-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-a9-ext2f",
-						     "clk-m-st40rt",
-						     "clk-m-st231-dmu-0",
-						     "clk-m-st231-dmu-1",
-						     "clk-m-st231-aud",
-						     "clk-m-st231-gp-0";
-			};
-
-			clk_m_a0_div2: clk-m-a0-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-st231-gp-1",
-						     "clk-m-icn-cpu",
-						     "clk-m-icn-stac",
-						     "clk-m-icn-dmu-0",
-						     "clk-m-icn-dmu-1",
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-
-			clk_m_a0_div3: clk-m-a0-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-icn-eram",
-						     "clk-m-a9-trace";
-			};
-		};
-
-		clockgen-a@fd6db000 {
-			reg = <0xfd6db000 0xb50>;
-
-			clk_m_a1_pll0: clk-m-a1-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll0-phi0",
-						     "clk-m-a1-pll0-phi1",
-						     "clk-m-a1-pll0-phi2",
-						     "clk-m-a1-pll0-phi3";
-			};
-
-			clk_m_a1_pll1: clk-m-a1-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll1-phi0",
-						     "clk-m-a1-pll1-phi1",
-						     "clk-m-a1-pll1-phi2",
-						     "clk-m-a1-pll1-phi3";
-			};
-
-			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-osc-prediv";
-			};
-
-			clk_m_a1_div0: clk-m-a1-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-fdma-12",
-						     "clk-m-fdma-10",
-						     "clk-m-fdma-11",
-						     "clk-m-hva-lmi",
-						     "clk-m-proc-sc",
-						     "clk-m-tp",
-						     "clk-m-icn-gpu",
-						     "clk-m-icn-vdp-0";
-			};
-
-			clk_m_a1_div1: clk-m-a1-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-icn-vdp-1",
-						     "clk-m-icn-vdp-2",
-						     "clk-m-icn-vdp-3",
-						     "clk-m-prv-t1-bus",
-						     "clk-m-icn-vdp-4",
-						     "clk-m-icn-reg-10",
-						     "", /* Unused */
-						     ""; /* clk-m-icn-st231 */
-			};
-
-			clk_m_a1_div2: clk-m-a1-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-fvdp-proc-alt",
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-
-			clk_m_a1_div3: clk-m-a1-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-		};
-
-		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a0_div1 2>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		clockgen-a@fd345000 {
-			reg = <0xfd345000 0xb50>;
-
-			clk_m_a2_pll0: clk-m-a2-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll0-phi0",
-						     "clk-m-a2-pll0-phi1",
-						     "clk-m-a2-pll0-phi2",
-						     "clk-m-a2-pll0-phi3";
-			};
-
-			clk_m_a2_pll1: clk-m-a2-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll1-phi0",
-						     "clk-m-a2-pll1-phi1",
-						     "clk-m-a2-pll1-phi2",
-						     "clk-m-a2-pll1-phi3";
-			};
-
-			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-osc-prediv";
-			};
-
-			clk_m_a2_div0: clk-m-a2-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-vtac-main-phy",
-						     "clk-m-vtac-aux-phy",
-						     "clk-m-stac-phy",
-						     "clk-m-stac-sys",
-						     "", /* clk-m-mpestac-pg */
-						     "", /* clk-m-mpestac-wc */
-						     "", /* clk-m-mpevtacaux-pg*/
-						     ""; /* clk-m-mpevtacmain-pg*/
-			};
-
-			clk_m_a2_div1: clk-m-a2-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
-						     "", /* clk-m-mpevtacrx1-wc */
-						     "clk-m-compo-main",
-						     "clk-m-compo-aux",
-						     "clk-m-bdisp-0",
-						     "clk-m-bdisp-1",
-						     "clk-m-icn-bdisp-0",
-						     "clk-m-icn-bdisp-1";
-			};
-
-			clk_m_a2_div2: clk-m-a2-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "", /* clk-m-icn-hqvdp0 */
-						     "", /* clk-m-icn-hqvdp1 */
-						     "clk-m-icn-compo",
-						     "", /* clk-m-icn-vdpaux */
-						     "clk-m-icn-ts",
-						     "clk-m-icn-reg-lp-10",
-						     "clk-m-dcephy-impctrl",
-						     ""; /* Unused */
-			};
-
-			clk_m_a2_div3: clk-m-a2-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = ""; /* Unused */
-						/* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * A9 PLL
-		 */
-		clockgen-a9@fdde00d8 {
-			reg = <0xfdde00d8 0x70>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-a9-pll-odf";
-			};
-		};
-
-		/*
-		 * ARM CPU related clocks
-		 */
-		clk_m_a9: clk-m-a9@fdde00d8 {
-			#clock-cells = <0>;
-			compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0xfdde00d8 0x4>;
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_m_a0_div1 2>,
-				 <&clk_m_a9_ext2f_div2>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: clk-m-a9-periphs {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a9>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-};
diff --git a/src/arm/stih415-pinctrl.dtsi b/src/arm/stih415-pinctrl.dtsi
deleted file mode 100644
index 8509a037ae21..000000000000
--- a/src/arm/stih415-pinctrl.dtsi
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		gpio0	= &PIO0;
-		gpio1	= &PIO1;
-		gpio2	= &PIO2;
-		gpio3	= &PIO3;
-		gpio4	= &PIO4;
-		gpio5	= &PIO5;
-		gpio6	= &PIO6;
-		gpio7	= &PIO7;
-		gpio8	= &PIO8;
-		gpio9	= &PIO9;
-		gpio10	= &PIO10;
-		gpio11	= &PIO11;
-		gpio12	= &PIO12;
-		gpio13	= &PIO13;
-		gpio14	= &PIO14;
-		gpio15	= &PIO15;
-		gpio16	= &PIO16;
-		gpio17	= &PIO17;
-		gpio18	= &PIO18;
-		gpio19	= &PIO100;
-		gpio20	= &PIO101;
-		gpio21	= &PIO102;
-		gpio22	= &PIO103;
-		gpio23	= &PIO104;
-		gpio24	= &PIO105;
-		gpio25	= &PIO106;
-		gpio26	= &PIO107;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-sbc-pinctrl";
-			st,syscfg	= <&syscfg_sbc>;
-			reg 		= <0xfe61f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges 		= <0 0xfe610000 0x5000>;
-
-			PIO0: gpio@fe610000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO0";
-			};
-			PIO1: gpio@fe611000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO1";
-			};
-			PIO2: gpio@fe612000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO2";
-			};
-			PIO3: gpio@fe613000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO3";
-			};
-			PIO4: gpio@fe614000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO4";
-			};
-
-			sbc_serial1 {
-				pinctrl_sbc_serial1:sbc_serial1 {
-					st,pins {
-						tx	= <&PIO2 6 ALT3 OUT>;
-						rx	= <&PIO2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&PIO0 2 ALT2 IN>;
-						keyin1 = <&PIO0 3 ALT2 IN>;
-						keyin2 = <&PIO0 4 ALT2 IN>;
-						keyin3 = <&PIO2 6 ALT2 IN>;
-
-						keyout0 = <&PIO1 6 ALT2 OUT>;
-						keyout1 = <&PIO1 7 ALT2 OUT>;
-						keyout2 = <&PIO0 6 ALT2 OUT>;
-						keyout3 = <&PIO2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c0 {
-				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
-					st,pins {
-						sda = <&PIO4 6 ALT1 BIDIR>;
-						scl = <&PIO4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			sbc_i2c1 {
-				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
-					st,pins {
-						sda = <&PIO3 2 ALT2 BIDIR>;
-						scl = <&PIO3 1 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			rc{
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&PIO4 0 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac1 {
-				pinctrl_mii1: mii1 {
-						st,pins {
-						 txd0   = <&PIO0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd1   = <&PIO0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd2   = <&PIO0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd3   = <&PIO0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txer   = <&PIO0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txen   = <&PIO0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txclk  = <&PIO0 6 ALT1 IN   NICLK	0	CLK_A>;
-						 col    = <&PIO0 7 ALT1 IN   BYPASS	1000>;
-						 mdio   = <&PIO1 0 ALT1 OUT  BYPASS	0>;
-						 mdc    = <&PIO1 1 ALT1 OUT  NICLK	0	CLK_A>;
-						 crs    = <&PIO1 2 ALT1 IN   BYPASS	1000>;
-						 mdint  = <&PIO1 3 ALT1 IN   BYPASS	0>;
-						 rxd0   = <&PIO1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd1   = <&PIO1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd2   = <&PIO1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd3   = <&PIO1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxdv   = <&PIO2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rx_er  = <&PIO2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxclk  = <&PIO2 2 ALT1 IN   NICLK	0	CLK_A>;
-						 phyclk = <&PIO2 3 ALT1 IN   NICLK	1000	CLK_A>;
-					};
-				};
-
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-						 txd0 =	 <&PIO0 0 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd1 =	 <&PIO0 1 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd2 =	 <&PIO0 2 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd3 =	 <&PIO0 3 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txen =	 <&PIO0 5 ALT1 OUT DE_IO	0	CLK_A>;
-						 txclk = <&PIO0 6 ALT1 IN	NICLK	0	CLK_A>;
-						 mdio =	 <&PIO1 0 ALT1 OUT	BYPASS	0>;
-						 mdc =	 <&PIO1 1 ALT1 OUT	NICLK	0	CLK_A>;
-						 rxd0 =	 <&PIO1 4 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd1 =	 <&PIO1 5 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd2 =	 <&PIO1 6 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd3 =	 <&PIO1 7 ALT1 IN DE_IO	0	CLK_A>;
-
-						 rxdv =	  <&PIO2 0 ALT1 IN DE_IO	500	CLK_A>;
-						 rxclk =  <&PIO2 2 ALT1 IN	NICLK	0	CLK_A>;
-						 phyclk = <&PIO2 3 ALT4 OUT	NICLK	0	CLK_B>;
-
-						 clk125= <&PIO3 7 ALT4 IN 	NICLK	0	CLK_A>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-front-pinctrl";
-			st,syscfg	= <&syscfg_front>;
-			reg 		= <0xfee0f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfee00000 0x8000>;
-
-			PIO5: gpio@fee00000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO5";
-			};
-			PIO6: gpio@fee01000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO6";
-			};
-			PIO7: gpio@fee02000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO7";
-			};
-			PIO8: gpio@fee03000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO8";
-			};
-			PIO9: gpio@fee04000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO9";
-			};
-			PIO10: gpio@fee05000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO10";
-			};
-			PIO11: gpio@fee06000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x6000 0x100>;
-				st,bank-name	= "PIO11";
-			};
-			PIO12: gpio@fee07000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x7000 0x100>;
-				st,bank-name	= "PIO12";
-			};
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&PIO9 3 ALT1 BIDIR>;
-						scl = <&PIO9 2 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&PIO12 1 ALT1 BIDIR>;
-						scl = <&PIO12 0 ALT1 BIDIR>;
-					};
-				};
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-rear-pinctrl";
-			st,syscfg	= <&syscfg_rear>;
-			reg 		= <0xfe82f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfe820000 0x8000>;
-
-			PIO13: gpio@fe820000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO13";
-			};
-			PIO14: gpio@fe821000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO14";
-			};
-			PIO15: gpio@fe822000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO15";
-			};
-			PIO16: gpio@fe823000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO16";
-			};
-			PIO17: gpio@fe824000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO17";
-			};
-			PIO18: gpio@fe825000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO18";
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx	= <&PIO17 4 ALT2 OUT>;
-						rx	= <&PIO17 5 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac0{
-				pinctrl_mii0: mii0 {
-					st,pins {
-					 mdint =	<&PIO13 6 ALT2	IN	BYPASS		0>;
-					 txen =		<&PIO13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-
-					 txd0 =		<&PIO14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd1 =		<&PIO14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd2 =		<&PIO14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-					 txd3 =		<&PIO14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-
-					 txclk =	<&PIO15 0 ALT2	IN	NICLK		0	CLK_A>;
-					 txer =		<&PIO15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 crs =		<&PIO15 2 ALT2	IN	BYPASS		1000>;
-					 col =		<&PIO15 3 ALT2	IN	BYPASS		1000>;
-					 mdio  =        <&PIO15 4 ALT2	OUT	BYPASS 	3000>;
-					 mdc   =        <&PIO15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
-
-					 rxd0 =		<&PIO16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd1 =		<&PIO16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd2 =		<&PIO16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd3 =		<&PIO16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxdv =		<&PIO15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rx_er =	<&PIO15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxclk =	<&PIO17 0 ALT2	IN	NICLK		0	CLK_A>;
-					 phyclk =	<&PIO13 5 ALT2	OUT	NICLK	1000	CLK_A>;
-
-					};
-				};
-
-			pinctrl_gmii0: gmii0 {
-				st,pins {
-					 mdint =	<&PIO13 6	ALT2 IN		BYPASS	0>;
-					 mdio  =        <&PIO15 4 	ALT2 OUT	BYPASS 	3000>;
-					 mdc   =        <&PIO15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
-					 txen =		<&PIO13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-
-					 txd0 =		<&PIO14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd1 =		<&PIO14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd2 =		<&PIO14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd3 =		<&PIO14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd4 =		<&PIO14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd5 =		<&PIO14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd6 =		<&PIO14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd7 =		<&PIO14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-
-					 txclk =	<&PIO15 0	ALT2 IN		NICLK	0	CLK_A>;
-					 txer =		<&PIO15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
-					 crs =		<&PIO15 2	ALT2 IN		BYPASS	1000>;
-					 col =		<&PIO15 3	ALT2 IN		BYPASS	1000>;
-					 rxdv =		<&PIO15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rx_er =	<&PIO15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxd0 =		<&PIO16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd1 =		<&PIO16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd2 =		<&PIO16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd3 =		<&PIO16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd4 =		<&PIO16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd5 =		<&PIO16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd6 =		<&PIO16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd7 =		<&PIO16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxclk =	<&PIO17 0	ALT2 IN	NICLK	0	CLK_A>;
-					 clk125 =	<&PIO17 6	ALT1 IN	NICLK	0	CLK_A>;
-                                         phyclk =       <&PIO13 5       ALT4 OUT NICLK   0       CLK_B>;
-
-
-					};
-				};
-			};
-		};
-
-		pin-controller-left {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-left-pinctrl";
-			st,syscfg	= <&syscfg_left>;
-			reg 		= <0xfd6bf080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd6b0000 0x3000>;
-
-			PIO100: gpio@fd6b0000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO100";
-			};
-			PIO101: gpio@fd6b1000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO101";
-			};
-			PIO102: gpio@fd6b2000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO102";
-			};
-		};
-
-		pin-controller-right {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-right-pinctrl";
-			st,syscfg	= <&syscfg_right>;
-			reg 		= <0xfd33f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd330000 0x5000>;
-
-			PIO103: gpio@fd330000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO103";
-			};
-			PIO104: gpio@fd331000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO104";
-			};
-			PIO105: gpio@fd332000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO105";
-			};
-			PIO106: gpio@fd333000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO106";
-			};
-			PIO107: gpio@fd334000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO107";
-			};
-		};
-	};
-};
diff --git a/src/arm/stih415.dtsi b/src/arm/stih415.dtsi
deleted file mode 100644
index a0f6f75fe3b5..000000000000
--- a/src/arm/stih415.dtsi
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x.dtsi"
-#include "stih415-clock.dtsi"
-#include "stih415-pinctrl.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/stih415-resets.h>
-/ {
-
-	L2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0xfffe2000 0x1000>;
-		arm,data-latency = <3 2 2>;
-		arm,tag-latency = <1 1 1>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible	= "simple-bus";
-
-		powerdown: powerdown-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih415-powerdown";
-		};
-
-		softreset: softreset-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih415-softreset";
-		};
-
-		syscfg_sbc: sbc-syscfg@fe600000{
-			compatible      = "st,stih415-sbc-syscfg", "syscon";
-			reg		= <0xfe600000 0xb4>;
-		};
-
-		syscfg_front: front-syscfg@fee10000{
-			compatible      = "st,stih415-front-syscfg", "syscon";
-			reg		= <0xfee10000 0x194>;
-		};
-
-		syscfg_rear: rear-syscfg@fe830000{
-			compatible      = "st,stih415-rear-syscfg", "syscon";
-			reg		= <0xfe830000 0x190>;
-		};
-
-		/* MPE syscfgs */
-		syscfg_left: left-syscfg@fd690000{
-			compatible      = "st,stih415-left-syscfg", "syscon";
-			reg		= <0xfd690000 0x78>;
-		};
-
-		syscfg_right: right-syscfg@fd320000{
-			compatible      = "st,stih415-right-syscfg", "syscon";
-			reg		= <0xfd320000 0x180>;
-		};
-
-		syscfg_system: system-syscfg@fdde0000  {
-			compatible      = "st,stih415-system-syscfg", "syscon";
-			reg		= <0xfdde0000 0x15c>;
-		};
-
-		syscfg_lpm: lpm-syscfg@fe4b5100{
-			compatible      = "st,stih415-lpm-syscfg", "syscon";
-			reg		= <0xfe4b5100 0x08>;
-		};
-
-		serial2: serial@fed32000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfed32000 0x2c>;
-			interrupts	= <0 197 0>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-		};
-
-		/* SBC comms block ASCs in SASG1 */
-		sbc_serial1: serial@fe531000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfe531000 0x2c>;
-			interrupts	= <0 210 0>;
-			clocks		= <&clk_sysin>;
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_sbc_serial1>;
-		};
-
-		i2c@fed40000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed40000 0x110>;
-			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fed41000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed41000 0x110>;
-			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe540000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe540000 0x110>;
-			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe541000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe541000 0x110>;
-			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			device_type 	= "network";
-			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
-			status 		= "disabled";
-
-			reg 		= <0xfe810000 0x8000>, <0x148 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-
-			interrupts 	= <0 147 0>, <0 148 0>, <0 149 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-			resets			= <&softreset STIH415_ETH0_SOFTRESET>;
-			reset-names		= "stmmaceth";
-
-			snps,pbl 	= <32>;
-			snps,mixed-burst;
-			snps,force_sf_dma_mode;
-
-			st,syscon	= <&syscfg_rear>;
-
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii0>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			device_type = "network";
-			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
-			status 		= "disabled";
-			reg		= <0xfef08000 0x8000>, <0x74 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-			interrupts 	= <0 150 0>, <0 151 0>, <0 152 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl	= <32>;
-			snps,mixed-burst;
-			snps,force_sf_dma_mode;
-
-			st,syscon		= <&syscfg_sbc>;
-
-			resets			= <&softreset STIH415_ETH1_SOFTRESET>;
-			reset-names		= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii1>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
-		};
-
-		rc: rc@fe518000 {
-			compatible	= "st,comms-irb";
-			reg		= <0xfe518000 0x234>;
-			interrupts	=  <0 203 0>;
-			clocks		= <&clk_sysin>;
-			rx-mode		= "infrared";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_ir>;
-			resets		= <&softreset STIH415_IRB_SOFTRESET>;
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			compatible = "st,sti-keyscan";
-			status = "disabled";
-			reg = <0xfe4b0000 0x2000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
-			clocks = <&clk_sysin>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_keyscan>;
-			resets	= <&powerdown STIH415_KEYSCAN_POWERDOWN>,
-				  <&softreset STIH415_KEYSCAN_SOFTRESET>;
-		};
-	};
-};
diff --git a/src/arm/stih416-b2000.dts b/src/arm/stih416-b2000.dts
deleted file mode 100644
index 488e80a5d69d..000000000000
--- a/src/arm/stih416-b2000.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2000.dtsi"
-/ {
-	model = "STiH416 B2000";
-	compatible = "st,stih416-b2000", "st,stih416";
-};
diff --git a/src/arm/stih416-b2020.dts b/src/arm/stih416-b2020.dts
deleted file mode 100644
index 4e2df66b99ea..000000000000
--- a/src/arm/stih416-b2020.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH416 B2020";
-	compatible = "st,stih416-b2020", "st,stih416";
-};
diff --git a/src/arm/stih416-b2020e.dts b/src/arm/stih416-b2020e.dts
deleted file mode 100644
index ba0fa2caaf18..000000000000
--- a/src/arm/stih416-b2020e.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Lee Jones <lee.jones@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH416 B2020 REV-E";
-	compatible = "st,stih416-b2020", "st,stih416";
-
-	soc {
-		leds {
-			compatible = "gpio-leds";
-			red {
-				#gpio-cells		= <1>;
-				label			= "Front Panel LED";
-				gpios			= <&PIO4 1>;
-				linux,default-trigger	= "heartbeat";
-			};
-			green {
-				gpios			= <&PIO1 3>;
-				default-state 		= "off";
-			};
-		};
-
-		ethernet1: dwmac@fef08000 {
-			snps,reset-gpio = <&PIO0 7>;
-		};
-	};
-};
diff --git a/src/arm/stih416-clock.dtsi b/src/arm/stih416-clock.dtsi
deleted file mode 100644
index 5b4fb838cddb..000000000000
--- a/src/arm/stih416-clock.dtsi
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics R&D Limited
- * <stlinux-devel@stlinux.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/stih416-clks.h>
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed 30MHz oscillator inputs to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ClockGenAs on SASG2
-		 */
-		clockgen-a@fee62000 {
-			reg = <0xfee62000 0xb48>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll0-hs",
-						     "clk-s-a0-pll0-ls",
-						     "clk-s-a0-pll1";
-			};
-
-			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-osc-prediv";
-			};
-
-			clk_s_a0_hs: clk-s-a0-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 0>, /* PLL0 HS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-fdma-0",
-						     "clk-s-fdma-1",
-						     ""; /* clk-s-jit-sense */
-						     /* Fourth output unused */
-			};
-
-			clk_s_a0_ls: clk-s-a0-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 1>, /* PLL0 LS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-reg-0",
-						     "clk-s-icn-if-0",
-						     "clk-s-icn-reg-lp-0",
-						     "clk-s-emiss",
-						     "clk-s-eth1-phy",
-						     "clk-s-mii-ref-out";
-						     /* Remaining outputs unused */
-			};
-		};
-
-		clockgen-a@fee81000 {
-			reg = <0xfee81000 0xb48>;
-
-			clk_s_a1_pll: clk-s-a1-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-pll0-hs",
-						     "clk-s-a1-pll0-ls",
-						     "clk-s-a1-pll1";
-			};
-
-			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-osc-prediv";
-			};
-
-			clk_s_a1_hs: clk-s-a1-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 0>, /* PLL0 HS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "", /* Reserved */
-						     "", /* Reserved */
-						     "clk-s-stac-phy",
-						     "clk-s-vtac-tx-phy";
-			};
-
-			clk_s_a1_ls: clk-s-a1-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 1>, /* PLL0 LS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-if-2",
-						     "clk-s-card-mmc-0",
-						     "clk-s-icn-if-1",
-						     "clk-s-gmac0-phy",
-						     "clk-s-nand-ctrl",
-						     "", /* Reserved */
-						     "clk-s-mii0-ref-out",
-						     "clk-s-stac-sys",
-						     "clk-s-card-mmc-1";
-						     /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * ClockGenAs on MPE42
-		 */
-		clockgen-a@fde12000 {
-			reg = <0xfde12000 0xb50>;
-
-			clk_m_a0_pll0: clk-m-a0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll0-phi0",
-						     "clk-m-a0-pll0-phi1",
-						     "clk-m-a0-pll0-phi2",
-						     "clk-m-a0-pll0-phi3";
-			};
-
-			clk_m_a0_pll1: clk-m-a0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll1-phi0",
-						     "clk-m-a0-pll1-phi1",
-						     "clk-m-a0-pll1-phi2",
-						     "clk-m-a0-pll1-phi3";
-			};
-
-			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-osc-prediv";
-			};
-
-			clk_m_a0_div0: clk-m-a0-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-fdma-12",
-						     "", /* Unused */
-						     "clk-m-pp-dmu-0",
-						     "clk-m-pp-dmu-1",
-						     "clk-m-icm-lmi",
-						     "clk-m-vid-dmu-0";
-			};
-
-			clk_m_a0_div1: clk-m-a0-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-vid-dmu-1",
-						     "", /* Unused */
-						     "clk-m-a9-ext2f",
-						     "clk-m-st40rt",
-						     "clk-m-st231-dmu-0",
-						     "clk-m-st231-dmu-1",
-						     "clk-m-st231-aud",
-						     "clk-m-st231-gp-0";
-			};
-
-			clk_m_a0_div2: clk-m-a0-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-st231-gp-1",
-						     "clk-m-icn-cpu",
-						     "clk-m-icn-stac",
-						     "clk-m-tx-icn-dmu-0",
-						     "clk-m-tx-icn-dmu-1",
-						     "clk-m-tx-icn-ts",
-						     "clk-m-icn-vdp-0",
-						     "clk-m-icn-vdp-1";
-			};
-
-			clk_m_a0_div3: clk-m-a0-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-icn-vp8",
-						     "", /* Unused */
-						     "clk-m-icn-reg-11",
-						     "clk-m-a9-trace";
-			};
-		};
-
-		clockgen-a@fd6db000 {
-			reg = <0xfd6db000 0xb50>;
-
-			clk_m_a1_pll0: clk-m-a1-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll0-phi0",
-						     "clk-m-a1-pll0-phi1",
-						     "clk-m-a1-pll0-phi2",
-						     "clk-m-a1-pll0-phi3";
-			};
-
-			clk_m_a1_pll1: clk-m-a1-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll1-phi0",
-						     "clk-m-a1-pll1-phi1",
-						     "clk-m-a1-pll1-phi2",
-						     "clk-m-a1-pll1-phi3";
-			};
-
-			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-osc-prediv";
-			};
-
-			clk_m_a1_div0: clk-m-a1-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "", /* Unused */
-						     "clk-m-fdma-10",
-						     "clk-m-fdma-11",
-						     "clk-m-hva-alt",
-						     "clk-m-proc-sc",
-						     "clk-m-tp",
-						     "clk-m-rx-icn-dmu-0",
-						     "clk-m-rx-icn-dmu-1";
-			};
-
-			clk_m_a1_div1: clk-m-a1-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-rx-icn-ts",
-						     "clk-m-rx-icn-vdp-0",
-						     "", /* Unused */
-						     "clk-m-prv-t1-bus",
-						     "clk-m-icn-reg-12",
-						     "clk-m-icn-reg-10",
-						     "", /* Unused */
-						     "clk-m-icn-st231";
-			};
-
-			clk_m_a1_div2: clk-m-a1-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-fvdp-proc-alt",
-						     "clk-m-icn-reg-13",
-						     "clk-m-tx-icn-gpu",
-						     "clk-m-rx-icn-gpu",
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* clk-m-apb-pm-12 */
-						     ""; /* Unused */
-			};
-
-			clk_m_a1_div3: clk-m-a1-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* clk-m-gpu-alt */
-			};
-		};
-
-		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a0_div1 2>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		clockgen-a@fd345000 {
-			reg = <0xfd345000 0xb50>;
-
-			clk_m_a2_pll0: clk-m-a2-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll0-phi0",
-						     "clk-m-a2-pll0-phi1",
-						     "clk-m-a2-pll0-phi2",
-						     "clk-m-a2-pll0-phi3";
-			};
-
-			clk_m_a2_pll1: clk-m-a2-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll1-phi0",
-						     "clk-m-a2-pll1-phi1",
-						     "clk-m-a2-pll1-phi2",
-						     "clk-m-a2-pll1-phi3";
-			};
-
-			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-osc-prediv";
-			};
-
-			clk_m_a2_div0: clk-m-a2-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-vtac-main-phy",
-						     "clk-m-vtac-aux-phy",
-						     "clk-m-stac-phy",
-						     "clk-m-stac-sys",
-						     "", /* clk-m-mpestac-pg */
-						     "", /* clk-m-mpestac-wc */
-						     "", /* clk-m-mpevtacaux-pg*/
-						     ""; /* clk-m-mpevtacmain-pg*/
-			};
-
-			clk_m_a2_div1: clk-m-a2-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
-						     "", /* clk-m-mpevtacrx1-wc */
-						     "clk-m-compo-main",
-						     "clk-m-compo-aux",
-						     "clk-m-bdisp-0",
-						     "clk-m-bdisp-1",
-						     "clk-m-icn-bdisp",
-						     "clk-m-icn-compo";
-			};
-
-			clk_m_a2_div2: clk-m-a2-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-icn-vdp-2",
-						     "", /* Unused */
-						     "clk-m-icn-reg-14",
-						     "clk-m-mdtp",
-						     "clk-m-jpegdec",
-						     "", /* Unused */
-						     "clk-m-dcephy-impctrl",
-						     ""; /* Unused */
-			};
-
-			clk_m_a2_div3: clk-m-a2-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     ""; /* clk-m-apb-pm-11 */
-						     /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * A9 PLL
-		 */
-		clockgen-a9@fdde08b0 {
-			reg = <0xfdde08b0 0x70>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-a9-pll-odf";
-			};
-		};
-
-		/*
-		 * ARM CPU related clocks
-		 */
-		clk_m_a9: clk-m-a9@fdde08ac {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0xfdde08ac 0x4>;
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_m_a0_div1 2>,
-				 <&clk_m_a9_ext2f_div2>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: clk-m-a9-periphs {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a9>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/*
-		 * Frequency synthesizers on the SASG2
-		 */
-		clockgen_b0: clockgen-b0@fee108b4 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfee108b4 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-usb48",
-					     "clk-s-dss",
-					     "clk-s-stfe-frc-2",
-					     "clk-s-thsens-scard";
-		};
-
-		clockgen_b1: clockgen-b1@fe8308c4 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfe8308c4 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-pcm-0",
-					     "clk-s-pcm-1",
-					     "clk-s-pcm-2",
-					     "clk-s-pcm-3";
-		};
-
-		clockgen_c: clockgen-c@fe8307d0 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs432", "st,quadfs";
-			reg = <0xfe8307d0 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-c-fs0-ch0",
-					     "clk-s-c-vcc-sd",
-					     "clk-s-c-fs0-ch2";
-		};
-
-		clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux";
-			reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */
-
-			clocks = <&clk_sysin>,
-				 <&clockgen_c 0>;
-		};
-
-		/*
-		 * Add a dummy clock for the HDMI PHY for the VCC input mux
-		 */
-		clk_s_tmds_fromphy: clk-s-tmds-fromphy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		clockgen_c_vcc: clockgen-c-vcc@fe8308ac {
-			#clock-cells = <1>;
-			compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
-			reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */
-
-			clocks = <&clk_s_vcc_hd>,
-				 <&clockgen_c 1>,
-				 <&clk_s_tmds_fromphy>,
-				 <&clockgen_c 2>;
-
-			clock-output-names  = "clk-s-pix-hdmi",
-					      "clk-s-pix-dvo",
-					      "clk-s-out-dvo",
-					      "clk-s-pix-hd",
-					      "clk-s-hddac",
-					      "clk-s-denc",
-					      "clk-s-sddac",
-					      "clk-s-pix-main",
-					      "clk-s-pix-aux",
-					      "clk-s-stfe-frc-0",
-					      "clk-s-ref-mcru",
-					      "clk-s-slave-mcru",
-					      "clk-s-tmds-hdmi",
-					      "clk-s-hdmi-reject-pll",
-					      "clk-s-thsens";
-		};
-
-		clockgen_d: clockgen-d@fee107e0 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfee107e0 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-ccsc",
-					     "clk-s-stfe-frc-1",
-					     "clk-s-tsout-1",
-					     "clk-s-mchi";
-		};
-
-		/*
-		 * Frequency synthesizers on the MPE42
-		 */
-		clockgen_e: clockgen-e@fd3208bc {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs660-E", "st,quadfs";
-			reg = <0xfd3208bc 0xb0>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-m-pix-mdtp-0",
-					     "clk-m-pix-mdtp-1",
-					     "clk-m-pix-mdtp-2",
-					     "clk-m-mpelpc";
-		};
-
-		clockgen_f: clockgen-f@fd320878 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs660-F", "st,quadfs";
-			reg = <0xfd320878 0xf0>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-m-main-vidfs",
-					     "clk-m-hva-fs",
-					     "clk-m-fvdp-vcpu",
-					     "clk-m-fvdp-proc-fs";
-		};
-
-		clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux";
-			reg = <0xfd320910 0x4>; /* SYSCFG8580 */
-
-			clocks = <&clk_m_a1_div2 0>,
-				 <&clockgen_f 3>;
-		};
-
-		clk_m_hva: clk-m-hva@fd690868 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
-			reg = <0xfd690868 0x4>; /* SYSCFG9538 */
-
-			clocks = <&clockgen_f 1>,
-				 <&clk_m_a1_div0 3>;
-		};
-
-		clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux";
-			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
-
-			clocks = <&clockgen_c_vcc 7>,
-				 <&clockgen_f 0>;
-		};
-
-		clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux";
-			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
-
-			clocks = <&clockgen_c_vcc 8>,
-				 <&clockgen_f 1>;
-		};
-
-		/*
-		 * Add a dummy clock for the HDMIRx external signal clock
-		 */
-		clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		clockgen_f_vcc: clockgen-f-vcc@fd32086c {
-			#clock-cells = <1>;
-			compatible = "st,stih416-clkgenf", "st,clkgen-vcc";
-			reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */
-
-			clocks = <&clk_m_f_vcc_hd>,
-				 <&clk_m_f_vcc_sd>,
-				 <&clockgen_f 0>,
-				 <&clk_m_pix_hdmirx_sas>;
-
-			clock-output-names  = "clk-m-pix-main-pipe",
-					      "clk-m-pix-aux-pipe",
-					      "clk-m-pix-main-cru",
-					      "clk-m-pix-aux-cru",
-					      "clk-m-xfer-be-compo",
-					      "clk-m-xfer-pip-compo",
-					      "clk-m-xfer-aux-compo",
-					      "clk-m-vsens",
-					      "clk-m-pix-hdmirx-0",
-					      "clk-m-pix-hdmirx-1";
-		};
-
-		/*
-		 * DDR PLL
-		 */
-		clockgen-ddr@0xfdde07d8 {
-			reg = <0xfdde07d8 0x110>;
-
-			clockgen_ddr_pll: clockgen-ddr-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-ddr0",
-						     "clockgen-ddr1";
-			};
-		};
-
-		/*
-		 * GPU PLL
-		 */
-		clockgen-gpu@fd68ff00 {
-			reg = <0xfd68ff00 0x910>;
-
-			clockgen_gpu_pll: clockgen-gpu-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-gpu-pll";
-			};
-		};
-	};
-};
diff --git a/src/arm/stih416-pinctrl.dtsi b/src/arm/stih416-pinctrl.dtsi
deleted file mode 100644
index ee6c119e261e..000000000000
--- a/src/arm/stih416-pinctrl.dtsi
+++ /dev/null
@@ -1,564 +0,0 @@
-
-/*
- * Copyright (C) 2013 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		gpio0	= &PIO0;
-		gpio1	= &PIO1;
-		gpio2	= &PIO2;
-		gpio3	= &PIO3;
-		gpio4	= &PIO4;
-		gpio5	= &PIO40;
-		gpio6	= &PIO5;
-		gpio7	= &PIO6;
-		gpio8	= &PIO7;
-		gpio9	= &PIO8;
-		gpio10	= &PIO9;
-		gpio11	= &PIO10;
-		gpio12	= &PIO11;
-		gpio13	= &PIO12;
-		gpio14	= &PIO30;
-		gpio15	= &PIO31;
-		gpio16	= &PIO13;
-		gpio17	= &PIO14;
-		gpio18	= &PIO15;
-		gpio19	= &PIO16;
-		gpio20	= &PIO17;
-		gpio21	= &PIO18;
-		gpio22	= &PIO100;
-		gpio23	= &PIO101;
-		gpio24	= &PIO102;
-		gpio25	= &PIO103;
-		gpio26	= &PIO104;
-		gpio27	= &PIO105;
-		gpio28	= &PIO106;
-		gpio29	= &PIO107;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-sbc-pinctrl";
-			st,syscfg	= <&syscfg_sbc>;
-			reg 		= <0xfe61f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfe610000 0x6000>;
-
-			PIO0: gpio@fe610000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO0";
-			};
-			PIO1: gpio@fe611000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO1";
-			};
-			PIO2: gpio@fe612000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO2";
-			};
-			PIO3: gpio@fe613000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO3";
-			};
-			PIO4: gpio@fe614000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO4";
-			};
-			PIO40: gpio@fe615000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO40";
-				st,retime-pin-mask = <0x7f>;
-			};
-
-			rc{
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&PIO4 0 ALT2 IN>;
-					};
-				};
-			};
-			sbc_serial1 {
-				pinctrl_sbc_serial1: sbc_serial1 {
-					st,pins {
-						tx	= <&PIO2 6 ALT3 OUT>;
-						rx	= <&PIO2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&PIO0 2 ALT2 IN>;
-						keyin1 = <&PIO0 3 ALT2 IN>;
-						keyin2 = <&PIO0 4 ALT2 IN>;
-						keyin3 = <&PIO2 6 ALT2 IN>;
-
-						keyout0 = <&PIO1 6 ALT2 OUT>;
-						keyout1 = <&PIO1 7 ALT2 OUT>;
-						keyout2 = <&PIO0 6 ALT2 OUT>;
-						keyout3 = <&PIO2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c0 {
-				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
-					st,pins {
-						sda = <&PIO4 6 ALT1 BIDIR>;
-						scl = <&PIO4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			sbc_i2c1 {
-				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
-					st,pins {
-						sda = <&PIO3 2 ALT2 BIDIR>;
-						scl = <&PIO3 1 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			gmac1 {
-				pinctrl_mii1: mii1 {
-					st,pins {
-						txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
-						col =   <&PIO0 7 ALT1 IN BYPASS 1000>;
-
-						mdio =  <&PIO1 0 ALT1 OUT BYPASS 1500>;
-						mdc =   <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
-						crs =   <&PIO1 2 ALT1 IN BYPASS 1000>;
-						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
-						rxd0 =  <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-						rxdv =  <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
-						phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
-					};
-				};
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-						txd0 =  <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
-						txd1 =  <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
-						txd2 =  <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
-						txd3 =  <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
-						txen =  <&PIO0 5 ALT1 OUT DE_IO 0   CLK_A>;
-						txclk = <&PIO0 6 ALT1 IN  NICLK 0   CLK_A>;
-
-						mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
-						mdc  = <&PIO1 1 ALT1 OUT NICLK  0 CLK_A>;
-						rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
-						rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
-						rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
-						rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
-
-						rxdv   = <&PIO2 0 ALT1 IN  DE_IO 500 CLK_A>;
-						rxclk  = <&PIO2 2 ALT1 IN  NICLK 0   CLK_A>;
-						phyclk = <&PIO2 3 ALT4 OUT NICLK 0   CLK_B>;
-
-						clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-front-pinctrl";
-			st,syscfg	= <&syscfg_front>;
-			reg 		= <0xfee0f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfee00000 0x10000>;
-
-			PIO5: gpio@fee00000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO5";
-			};
-			PIO6: gpio@fee01000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO6";
-			};
-			PIO7: gpio@fee02000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO7";
-			};
-			PIO8: gpio@fee03000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO8";
-			};
-			PIO9: gpio@fee04000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO9";
-			};
-			PIO10: gpio@fee05000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO10";
-			};
-			PIO11: gpio@fee06000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x6000 0x100>;
-				st,bank-name	= "PIO11";
-			};
-			PIO12: gpio@fee07000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x7000 0x100>;
-				st,bank-name	= "PIO12";
-			};
-			PIO30: gpio@fee08000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x8000 0x100>;
-				st,bank-name	= "PIO30";
-			};
-			PIO31: gpio@fee09000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x9000 0x100>;
-				st,bank-name	= "PIO31";
-			};
-
-			serial2-oe {
-				pinctrl_serial2_oe: serial2-1 {
-					st,pins {
-						output-enable	= <&PIO11 3 ALT2 OUT>;
-					};
-				};
-			};
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&PIO9 3 ALT1 BIDIR>;
-						scl = <&PIO9 2 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&PIO12 1 ALT1 BIDIR>;
-						scl = <&PIO12 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			fsm {
-				pinctrl_fsm: fsm {
-					st,pins {
-						spi-fsm-clk  = <&PIO12 2 ALT1 OUT>;
-						spi-fsm-cs   = <&PIO12 3 ALT1 OUT>;
-						spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
-						spi-fsm-miso = <&PIO12 5 ALT1 IN>;
-						spi-fsm-hol  = <&PIO12 6 ALT1 OUT>;
-						spi-fsm-wp   = <&PIO12 7 ALT1 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-rear-pinctrl";
-			st,syscfg	= <&syscfg_rear>;
-			reg 		= <0xfe82f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges 		= <0 0xfe820000 0x6000>;
-
-			PIO13: gpio@fe820000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO13";
-			};
-			PIO14: gpio@fe821000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO14";
-			};
-			PIO15: gpio@fe822000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO15";
-			};
-			PIO16: gpio@fe823000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO16";
-			};
-			PIO17: gpio@fe824000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO17";
-			};
-			PIO18: gpio@fe825000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO18";
-				st,retime-pin-mask = <0xf>;
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx	= <&PIO17 4 ALT2 OUT>;
-						rx	= <&PIO17 5 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac0 {
-				pinctrl_mii0: mii0 {
-					st,pins {
-						mdint = <&PIO13 6 ALT2 IN  BYPASS      0>;
-						txen =  <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd0 =  <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 =  <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 =  <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-						txd3 =  <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
-						txclk = <&PIO15 0 ALT2 IN  NICLK       0 CLK_A>;
-						txer =  <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						crs = <&PIO15 2 ALT2 IN  BYPASS 1000>;
-						col = <&PIO15 3 ALT2 IN  BYPASS 1000>;
-						mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
-						mdc = <&PIO15 5 ALT2 OUT NICLK  0    CLK_B>;
-
-						rxd0 =  <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxdv =  <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-						phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
-					};
-				};
-
-				pinctrl_gmii0: gmii0 {
-					st,pins {
-						};
-				};
-				pinctrl_rgmii0: rgmii0 {
-					st,pins {
-						 phyclk = <&PIO13  5 ALT4 OUT NICLK 0 CLK_B>;
-						 txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
-						 txd0  = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd1  = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd2  = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
-						 txd3  = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
-						 txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
-						 mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
-						 rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
-						 rxd0 =<&PIO16 0 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd1 =<&PIO16 1 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd2 =<&PIO16 2 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd3  =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
-						 rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-		};
-
-		pin-controller-fvdp-fe {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-fe-pinctrl";
-			st,syscfg	= <&syscfg_fvdp_fe>;
-			reg 		= <0xfd6bf080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd6b0000 0x3000>;
-
-			PIO100: gpio@fd6b0000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO100";
-			};
-			PIO101: gpio@fd6b1000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO101";
-			};
-			PIO102: gpio@fd6b2000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO102";
-			};
-		};
-
-		pin-controller-fvdp-lite {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-lite-pinctrl";
-			st,syscfg		= <&syscfg_fvdp_lite>;
-			reg 		= <0xfd33f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges			= <0 0xfd330000 0x5000>;
-
-			PIO103: gpio@fd330000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO103";
-			};
-			PIO104: gpio@fd331000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO104";
-			};
-			PIO105: gpio@fd332000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO105";
-			};
-			PIO106: gpio@fd333000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO106";
-			};
-
-			PIO107: gpio@fd334000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO107";
-				st,retime-pin-mask = <0xf>;
-			};
-		};
-	};
-};
diff --git a/src/arm/stih416.dtsi b/src/arm/stih416.dtsi
deleted file mode 100644
index 84758d76d064..000000000000
--- a/src/arm/stih416.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright (C) 2012 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x.dtsi"
-#include "stih416-clock.dtsi"
-#include "stih416-pinctrl.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/stih416-resets.h>
-/ {
-	L2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0xfffe2000 0x1000>;
-		arm,data-latency = <3 3 3>;
-		arm,tag-latency = <2 2 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible	= "simple-bus";
-
-		powerdown: powerdown-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih416-powerdown";
-		};
-
-		softreset: softreset-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih416-softreset";
-		};
-
-		syscfg_sbc:sbc-syscfg@fe600000{
-			compatible	= "st,stih416-sbc-syscfg", "syscon";
-			reg		= <0xfe600000 0x1000>;
-		};
-
-		syscfg_front:front-syscfg@fee10000{
-			compatible	= "st,stih416-front-syscfg", "syscon";
-			reg		= <0xfee10000 0x1000>;
-		};
-
-		syscfg_rear:rear-syscfg@fe830000{
-			compatible	= "st,stih416-rear-syscfg", "syscon";
-			reg		= <0xfe830000 0x1000>;
-		};
-
-		/* MPE */
-		syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
-			compatible	= "st,stih416-fvdp-fe-syscfg", "syscon";
-			reg		= <0xfddf0000 0x1000>;
-		};
-
-		syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
-			compatible	= "st,stih416-fvdp-lite-syscfg", "syscon";
-			reg		= <0xfd6a0000 0x1000>;
-		};
-
-		syscfg_cpu:cpu-syscfg@fdde0000{
-			compatible	= "st,stih416-cpu-syscfg", "syscon";
-			reg		= <0xfdde0000 0x1000>;
-		};
-
-		syscfg_compo:compo-syscfg@fd320000{
-			compatible	= "st,stih416-compo-syscfg", "syscon";
-			reg		= <0xfd320000 0x1000>;
-		};
-
-		syscfg_transport:transport-syscfg@fd690000{
-			compatible	= "st,stih416-transport-syscfg", "syscon";
-			reg		= <0xfd690000 0x1000>;
-		};
-
-		syscfg_lpm:lpm-syscfg@fe4b5100{
-			compatible	= "st,stih416-lpm-syscfg", "syscon";
-			reg		= <0xfe4b5100 0x8>;
-		};
-
-		serial2: serial@fed32000{
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfed32000 0x2c>;
-			interrupts	= <0 197 0>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
-		};
-
-		/* SBC_UART1 */
-		sbc_serial1: serial@fe531000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfe531000 0x2c>;
-			interrupts	= <0 210 0>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_sbc_serial1>;
-			clocks          = <&clk_sysin>;
-		};
-
-		i2c@fed40000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed40000 0x110>;
-			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fed41000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed41000 0x110>;
-			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe540000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe540000 0x110>;
-			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe541000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe541000 0x110>;
-			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			device_type 	= "network";
-			compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
-			status 		= "disabled";
-			reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-
-			interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl 	= <32>;
-			snps,mixed-burst;
-
-			st,syscon		= <&syscfg_rear>;
-			resets			= <&softreset STIH416_ETH0_SOFTRESET>;
-			reset-names		= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii0>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			device_type = "network";
-			compatible		= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
-			status 		= "disabled";
-			reg		= <0xfef08000 0x8000>, <0x7f0 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-			interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl	= <32>;
-			snps,mixed-burst;
-
-			st,syscon	= <&syscfg_sbc>;
-
-			resets		= <&softreset STIH416_ETH1_SOFTRESET>;
-			reset-names	= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii1>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
-		};
-
-		rc: rc@fe518000 {
-			compatible	= "st,comms-irb";
-			reg		= <0xfe518000 0x234>;
-			interrupts	=  <0 203 0>;
-			rx-mode         = "infrared";
-			clocks		= <&clk_sysin>;
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_ir>;
-			resets		= <&softreset STIH416_IRB_SOFTRESET>;
-		};
-
-		/* FSM */
-		spifsm: spifsm@fe902000 {
-			compatible	   = "st,spi-fsm";
-			reg		   = <0xfe902000 0x1000>;
-			pinctrl-0	   = <&pinctrl_fsm>;
-
-			st,syscfg	   = <&syscfg_rear>;
-			st,boot-device-reg = <0x958>;
-			st,boot-device-spi = <0x1a>;
-
-			status = "disabled";
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			compatible = "st,sti-keyscan";
-			status = "disabled";
-			reg = <0xfe4b0000 0x2000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
-			clocks = <&clk_sysin>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_keyscan>;
-			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
-				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
-		};
-	};
-};
diff --git a/src/arm/stih41x-b2000.dtsi b/src/arm/stih41x-b2000.dtsi
deleted file mode 100644
index b3dd6ca5c2ae..000000000000
--- a/src/arm/stih41x-b2000.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include <dt-bindings/input/input.h>
-/ {
-
-	memory{
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
-		linux,stdout-path = &serial2;
-	};
-
-	aliases {
-		ttyAS0 = &serial2;
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
-	};
-
-	soc {
-		serial2: serial@fed32000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible	= "gpio-leds";
-			fp_led {
-				#gpio-cells = <1>;
-				label	= "Front Panel LED";
-				gpios	= <&PIO105 7>;
-				linux,default-trigger	= "heartbeat";
-			};
-		};
-
-		/* HDMI Tx I2C */
-		i2c@fed41000 {
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			i2c-min-scl-pulse-width-us = <0>;
-			i2c-min-sda-pulse-width-us = <5>;
-
-			status = "okay";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			status			= "okay";
-			phy-mode		= "mii";
-			pinctrl-0		= <&pinctrl_mii0>;
-
-			snps,reset-gpio 	= <&PIO106 2>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			status			= "disabled";
-			phy-mode		= "mii";
-			st,tx-retime-src	= "txclk";
-
-			snps,reset-gpio 	= <&PIO4 7>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			keypad,num-rows = <4>;
-			keypad,num-columns = <4>;
-			st,debounce-us = <5000>;
-			linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
-					 MATRIX_KEY(0x00, 0x01, KEY_F9)
-					 MATRIX_KEY(0x00, 0x02, KEY_F5)
-					 MATRIX_KEY(0x00, 0x03, KEY_F1)
-					 MATRIX_KEY(0x01, 0x00, KEY_F14)
-					 MATRIX_KEY(0x01, 0x01, KEY_F10)
-					 MATRIX_KEY(0x01, 0x02, KEY_F6)
-					 MATRIX_KEY(0x01, 0x03, KEY_F2)
-					 MATRIX_KEY(0x02, 0x00, KEY_F15)
-					 MATRIX_KEY(0x02, 0x01, KEY_F11)
-					 MATRIX_KEY(0x02, 0x02, KEY_F7)
-					 MATRIX_KEY(0x02, 0x03, KEY_F3)
-					 MATRIX_KEY(0x03, 0x00, KEY_F16)
-					 MATRIX_KEY(0x03, 0x01, KEY_F12)
-					 MATRIX_KEY(0x03, 0x02, KEY_F8)
-					 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
-		};
-	};
-};
diff --git a/src/arm/stih41x-b2020.dtsi b/src/arm/stih41x-b2020.dtsi
deleted file mode 100644
index d8a84295c328..000000000000
--- a/src/arm/stih41x-b2020.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x-b2020x.dtsi"
-/ {
-	memory{
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
-		linux,stdout-path = &sbc_serial1;
-	};
-
-	aliases {
-		ttyAS0 = &sbc_serial1;
-		ethernet1 = &ethernet1;
-	};
-	soc {
-		sbc_serial1: serial@fe531000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible	= "gpio-leds";
-			red {
-				#gpio-cells = <1>;
-				label	= "Front Panel LED";
-				gpios	= <&PIO4 1>;
-				linux,default-trigger	= "heartbeat";
-			};
-			green {
-				gpios	= <&PIO4 7>;
-				default-state = "off";
-			};
-		};
-
-		i2c@fed40000 {
-			status = "okay";
-		};
-
-		/* HDMI Tx I2C */
-		i2c@fed41000 {
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			i2c-min-scl-pulse-width-us = <0>;
-			i2c-min-sda-pulse-width-us = <5>;
-
-			status = "okay";
-		};
-
-		i2c@fe540000 {
-			status = "okay";
-		};
-
-		i2c@fe541000 {
-			status = "okay";
-		};
-
-		ethernet1: dwmac@fef08000 {
-			status			= "okay";
-			phy-mode		= "rgmii-id";
-			max-speed		= <1000>;
-			st,tx-retime-src	= "clk_125";
-			snps,reset-gpio 	= <&PIO3 0>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-
-			pinctrl-0	= <&pinctrl_rgmii1>;
-		};
-	};
-};
diff --git a/src/arm/stih41x-b2020x.dtsi b/src/arm/stih41x-b2020x.dtsi
deleted file mode 100644
index df01c1211b32..000000000000
--- a/src/arm/stih41x-b2020x.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Lee Jones <lee.jones@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/ {
-	soc {
-		spifsm: spifsm@fe902000 {
-			#address-cells = <1>;
-			#size-cells    = <1>;
-
-			status = "okay";
-
-			partition@0 {
-				label = "SerialFlash1";
-				reg   = <0x00000000 0x00500000>;
-			};
-
-			partition@500000 {
-				label = "SerialFlash2";
-				reg   = <0x00500000 0x00b00000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/stih41x.dtsi b/src/arm/stih41x.dtsi
deleted file mode 100644
index 5cb0e63376b5..000000000000
--- a/src/arm/stih41x.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	intc: interrupt-controller@fffe1000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfffe1000 0x1000>,
-		      <0xfffe0100 0x100>;
-	};
-
-	scu@fffe0000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0xfffe0000 0x1000>;
-	};
-
-	timer@fffe0200 {
-		interrupt-parent = <&intc>;
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0xfffe0200 0x100>;
-		interrupts = <1 11 0x04>;
-		clocks = <&arm_periph_clk>;
-	};
-};
diff --git a/src/arm/sun4i-a10-a1000.dts b/src/arm/sun4i-a10-a1000.dts
deleted file mode 100644
index 9e99ade35e37..000000000000
--- a/src/arm/sun4i-a10-a1000.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Copyright 2013 Emilio López
- *
- * Emilio López <emilio@elopez.com.ar>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Mele A1000";
-	compatible = "mele,a1000", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			emac_power_pin_a1000: emac_power_pin@0 {
-				allwinner,pins = "PH15";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_a1000: led_pins@0 {
-				allwinner,pins = "PH10", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a1000>;
-
-		red {
-			label = "a1000:red:usr";
-			gpios = <&pio 7 10 0>;
-		};
-
-		blue {
-			label = "a1000:blue:usr";
-			gpios = <&pio 7 20 0>;
-		};
-	};
-
-	reg_emac_3v3: emac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emac_power_pin_a1000>;
-		regulator-name = "emac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 15 0>;
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-ba10-tvbox.dts b/src/arm/sun4i-a10-ba10-tvbox.dts
deleted file mode 100644
index 1763cc7ec023..000000000000
--- a/src/arm/sun4i-a10-ba10-tvbox.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "BA10 tvbox";
-	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			usb2_vbus_pin_a: usb2_vbus_pin@0 {
-				allwinner,pins = "PH12";
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		gpio = <&pio 7 12 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-cubieboard.dts b/src/arm/sun4i-a10-cubieboard.dts
deleted file mode 100644
index 3ce56bfbc0b5..000000000000
--- a/src/arm/sun4i-a10-cubieboard.dts
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Cubietech Cubieboard";
-	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubieboard>;
-
-		blue {
-			label = "cubieboard:blue:usr";
-			gpios = <&pio 7 21 0>; /* LED1 */
-		};
-
-		green {
-			label = "cubieboard:green:usr";
-			gpios = <&pio 7 20 0>; /* LED2 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-hackberry.dts b/src/arm/sun4i-a10-hackberry.dts
deleted file mode 100644
index 891ea446abae..000000000000
--- a/src/arm/sun4i-a10-hackberry.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Miniand Hackberry";
-	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy0>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&hackberry_hogs>;
-
-			hackberry_hogs: hogs@0 {
-				allwinner,pins = "PH19";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-					allwinner,pins = "PH12";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <0>;
-					allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_emac_3v3: emac-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "emac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 19 0>;
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-		gpio = <&pio 7 12 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-inet97fv2.dts b/src/arm/sun4i-a10-inet97fv2.dts
deleted file mode 100644
index 6b0c37812ade..000000000000
--- a/src/arm/sun4i-a10-inet97fv2.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright 2014 Open Source Support GmbH
- *
- * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "INet-97F Rev 02";
-	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-mini-xplus.dts b/src/arm/sun4i-a10-mini-xplus.dts
deleted file mode 100644
index b9ecce60f2e7..000000000000
--- a/src/arm/sun4i-a10-mini-xplus.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "PineRiver Mini X-Plus";
-	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ir0_pins_a: ir0@0 {
-				/* The ir receiver is not always populated */
-				allwinner,pull = <1>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-olinuxino-lime.dts b/src/arm/sun4i-a10-olinuxino-lime.dts
deleted file mode 100644
index d046d568f5a1..000000000000
--- a/src/arm/sun4i-a10-olinuxino-lime.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A10-OLinuXino-LIME";
-	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinolime>;
-
-		green {
-			label = "a10-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 0>;
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-pcduino.dts b/src/arm/sun4i-a10-pcduino.dts
deleted file mode 100644
index 6675bcd7860e..000000000000
--- a/src/arm/sun4i-a10-pcduino.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright 2014 Zoltan HERPAI
- * Zoltan HERPAI <wigyori@uid0.hu>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "LinkSprite pcDuino";
-	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10.dtsi b/src/arm/sun4i-a10.dtsi
deleted file mode 100644
index 459cb6377764..000000000000
--- a/src/arm/sun4i-a10.dtsi
+++ /dev/null
@@ -1,780 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	aliases {
-		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-				"apb0_ir1", "apb0_keypad";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_can", "apb1_scr",
-				"apb1_ps20", "apb1_ps21", "apb1_uart0",
-				"apb1_uart1", "apb1_uart2", "apb1_uart3",
-				"apb1_uart4", "apb1_uart5", "apb1_uart6",
-				"apb1_uart7";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		pata_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "pata";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		ir1_clk: clk@01c200b4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir1";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
-		};
-
-		spi3_clk: clk@01c200d4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200d4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi3";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-a10-emac";
-			reg = <0x01c0b000 0x1000>;
-			interrupts = <55>;
-			clocks = <&ahb_gates 17>;
-			status = "disabled";
-		};
-
-		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-a10-mdio";
-			reg = <0x01c0b080 0x14>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <33>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <35>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-			reg-names = "phy_ctrl", "pmu1", "pmu2";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <64>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ahci: sata@01c18000 {
-			compatible = "allwinner,sun4i-a10-ahci";
-			reg = <0x01c18000 0x1000>;
-			interrupts = <56>;
-			clocks = <&pll6 0>, <&ahb_gates 25>;
-			status = "disabled";
-		};
-
-		ehci1: usb@01c1c000 {
-			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-			reg = <0x01c1c000 0x100>;
-			interrupts = <40>;
-			clocks = <&ahb_gates 3>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci1: usb@01c1c400 {
-			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-			reg = <0x01c1c400 0x100>;
-			interrupts = <65>;
-			clocks = <&usb_clk 7>, <&ahb_gates 4>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi3: spi@01c1f000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c1f000 0x1000>;
-			interrupts = <50>;
-			clocks = <&ahb_gates 23>, <&spi3_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun4i-a10-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart0_pins_b: uart0@1 {
-				allwinner,pins = "PF2", "PF4";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PA10", "PA11";
-				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			ir0_pins_a: ir0@0 {
-				allwinner,pins = "PB3","PB4";
-				allwinner,function = "ir0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			ir1_pins_a: ir1@0 {
-				allwinner,pins = "PB22","PB23";
-				allwinner,function = "ir1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		rtc: rtc@01c20d00 {
-			compatible = "allwinner,sun4i-a10-rtc";
-			reg = <0x01c20d00 0x20>;
-			interrupts = <24>;
-		};
-
-		pwm: pwm@01c20e00 {
-			compatible = "allwinner,sun4i-a10-pwm";
-			reg = <0x01c20e00 0xc>;
-			clocks = <&osc24M>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		ir0: ir@01c21800 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 6>, <&ir0_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <5>;
-			reg = <0x01c21800 0x40>;
-			status = "disabled";
-		};
-
-		ir1: ir@01c21c00 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 7>, <&ir1_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <6>;
-			reg = <0x01c21c00 0x40>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <1>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <3>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <17>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 20>;
-			status = "disabled";
-		};
-
-		uart5: serial@01c29400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29400 0x400>;
-			interrupts = <18>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 21>;
-			status = "disabled";
-		};
-
-		uart6: serial@01c29800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29800 0x400>;
-			interrupts = <19>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 22>;
-			status = "disabled";
-		};
-
-		uart7: serial@01c29c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29c00 0x400>;
-			interrupts = <20>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 23>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
diff --git a/src/arm/sun5i-a10s-olinuxino-micro.dts b/src/arm/sun5i-a10s-olinuxino-micro.dts
deleted file mode 100644
index ea9519da5764..000000000000
--- a/src/arm/sun5i-a10s-olinuxino-micro.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A10s-Olinuxino Micro";
-	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 0>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 13 0>; /* PG13 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PE3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-				allwinner,pins = "PB10";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart2: serial@01c28800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_pins_a>;
-			status = "okay";
-		};
-
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-
-			at24@50 {
-				compatible = "at,24c16";
-				pagesize = <16>;
-				reg = <0x50>;
-				read-only;
-			};
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
-
-		green {
-			label = "a10s-olinuxino-micro:green:usr";
-			gpios = <&pio 4 3 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
-		gpio = <&pio 1 10 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a10s-r7-tv-dongle.dts b/src/arm/sun5i-a10s-r7-tv-dongle.dts
deleted file mode 100644
index 43a93762d4f2..000000000000
--- a/src/arm/sun5i-a10s-r7-tv-dongle.dts
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "R7 A10s hdmi tv-stick";
-	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 0>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_r7: led_pins@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_r7>;
-
-		green {
-			label = "r7-tv-dongle:green:usr";
-			gpios = <&pio 1 2 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_r7>;
-		gpio = <&pio 6 13 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a10s.dtsi b/src/arm/sun5i-a10s.dtsi
deleted file mode 100644
index 24b0ad3a7c07..000000000000
--- a/src/arm/sun5i-a10s.dtsi
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	aliases {
-		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
-				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
-				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
-				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
-				"apb0_ir", "apb0_keypad";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
-				"apb1_uart2", "apb1_uart3";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-a10-emac";
-			reg = <0x01c0b000 0x1000>;
-			interrupts = <55>;
-			clocks = <&ahb_gates 17>;
-			status = "disabled";
-		};
-
-		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-a10-mdio";
-			reg = <0x01c0b080 0x14>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <33>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a10s-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB19", "PB20";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PC18", "PC19";
-				allwinner,function = "uart2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart3_pins_a: uart3@0 {
-				allwinner,pins = "PG9", "PG10";
-				allwinner,function = "uart3";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			mmc1_pins_a: mmc1@0 {
-				allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
-				allwinner,function = "mmc1";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <1>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <3>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@01c2b000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@01c2b400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
-	};
-};
diff --git a/src/arm/sun5i-a13-olinuxino-micro.dts b/src/arm/sun5i-a13-olinuxino-micro.dts
deleted file mode 100644
index fa44b026483b..000000000000
--- a/src/arm/sun5i-a13-olinuxino-micro.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A13-Olinuxino Micro";
-	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxinom: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinom>;
-
-		power {
-			label = "a13-olinuxino-micro:green:power";
-			gpios = <&pio 6 9 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
-		gpio = <&pio 6 11 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a13-olinuxino.dts b/src/arm/sun5i-a13-olinuxino.dts
deleted file mode 100644
index 429994e1943e..000000000000
--- a/src/arm/sun5i-a13-olinuxino.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A13-Olinuxino";
-	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
-
-		power {
-			gpios = <&pio 6 9 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-		gpio = <&pio 6 11 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a13.dtsi b/src/arm/sun5i-a13.dtsi
deleted file mode 100644
index bf86e65dd167..000000000000
--- a/src/arm/sun5i-a13.dtsi
+++ /dev/null
@@ -1,528 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
-				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
-				"ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a13-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PE10", "PE11";
-				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart1_pins_b: uart1@1 {
-				allwinner,pins = "PG3", "PG4";
-				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
-	};
-};
diff --git a/src/arm/sun6i-a31-app4-evb1.dts b/src/arm/sun6i-a31-app4-evb1.dts
deleted file mode 100644
index 2bbf8867362b..000000000000
--- a/src/arm/sun6i-a31-app4-evb1.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2014 Boris Brezillon
- *
- * Boris Brezillon <boris.brezillon@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
-	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		pio: pinctrl@01c20800 {
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH27";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 27 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun6i-a31-colombus.dts b/src/arm/sun6i-a31-colombus.dts
deleted file mode 100644
index 546cf6eff5c7..000000000000
--- a/src/arm/sun6i-a31-colombus.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "WITS A31 Colombus Evaluation Board";
-	compatible = "wits,colombus", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 0 8 0>; /* PA8 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1b000 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pull = <1>;
-			};
-
-			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
-				allwinner,pins = "PA8";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "fail";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_colombus>;
-		gpio = <&pio 7 24 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun6i-a31-hummingbird.dts b/src/arm/sun6i-a31-hummingbird.dts
deleted file mode 100644
index f142065b3c1f..000000000000
--- a/src/arm/sun6i-a31-hummingbird.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2014 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Merrii A31 Hummingbird";
-	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 0 8 0>; /* PA8 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c1a400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_pins_a: mmc0@0 {
-				/* external pull-ups missing for some pins */
-				allwinner,pull = <1>;
-			};
-
-			mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
-				allwinner,pins = "PA8";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			/* pull-ups and devices require AXP221 DLDO3 */
-			status = "failed";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-
-			pcf8563: rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		gmac: ethernet@01c30000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 24 0>; /* PH24 */
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun6i-a31-m9.dts b/src/arm/sun6i-a31-m9.dts
deleted file mode 100644
index bc6115da5ae1..000000000000
--- a/src/arm/sun6i-a31-m9.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Mele M9 / A1000G Quad top set box";
-	compatible = "mele,m9", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 22 0>; /* PH22 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-				allwinner,pins = "PH22";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/sun6i-a31.dtsi b/src/arm/sun6i-a31.dtsi
deleted file mode 100644
index e06fbfc55bb7..000000000000
--- a/src/arm/sun6i-a31.dtsi
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		ethernet0 = &gmac;
-	};
-
-
-	cpus {
-		enable-method = "allwinner,sun6i-a31";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
-		interrupts = <0 120 4>,
-			     <0 121 4>,
-			     <0 122 4>,
-			     <0 123 4>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: osc24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6";
-		};
-
-		cpu: cpu@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1_mux: ahb1_mux@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
-			clock-output-names = "ahb1_mux";
-		};
-
-		ahb1: ahb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
-			clock-output-names = "ahb1";
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
-					"ahb1_nand0", "ahb1_sdram",
-					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
-					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
-					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
-					"ahb1_ehci1", "ahb1_ohci0",
-					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
-					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
-					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
-					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
-					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
-					"ahb1_drc0", "ahb1_drc1";
-		};
-
-		apb1: apb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_codec", "apb1_digital_mic",
-					"apb1_pio", "apb1_daudio0",
-					"apb1_daudio1";
-		};
-
-		apb2_mux: apb2_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-			clock-output-names = "apb2_mux";
-		};
-
-		apb2: apb2@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-apb2-div-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb2_mux>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2", "apb2_uart3",
-					"apb2_uart4", "apb2_uart5";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc2";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc3";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi2";
-		};
-
-		spi3_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi3";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
-					     "usb_ohci0", "usb_ohci1",
-					     "usb_ohci2";
-		};
-
-		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
-		 */
-		mii_phy_tx_clk: clk@1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-			clock-output-names = "mii_phy_tx";
-		};
-
-		gmac_int_tx_clk: clk@2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <125000000>;
-			clock-output-names = "gmac_int_tx";
-		};
-
-		gmac_tx_clk: clk@01c200d0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-gmac-clk";
-			reg = <0x01c200d0 0x4>;
-			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
-			clock-output-names = "gmac_tx";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dma: dma-controller@01c02000 {
-			compatible = "allwinner,sun6i-a31-dma";
-			reg = <0x01c02000 0x1000>;
-			interrupts = <0 50 4>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
-			#dma-cells = <1>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 8>;
-			reset-names = "ahb";
-			interrupts = <0 60 4>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 9>;
-			reset-names = "ahb";
-			interrupts = <0 61 4>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 10>;
-			reset-names = "ahb";
-			interrupts = <0 62 4>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb1_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 11>;
-			reset-names = "ahb";
-			interrupts = <0 63 4>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun6i-a31-usb-phy";
-			reg = <0x01c19400 0x10>,
-			      <0x01c1a800 0x4>,
-			      <0x01c1b800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1",
-				    "pmu2";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>,
-				 <&usb_clk 10>;
-			clock-names = "usb0_phy",
-				      "usb1_phy",
-				      "usb2_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>,
-				 <&usb_clk 2>;
-			reset-names = "usb0_reset",
-				      "usb1_reset",
-				      "usb2_reset";
-			status = "disabled";
-			#phy-cells = <1>;
-		};
-
-		ehci0: usb@01c1a000 {
-			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
-			reg = <0x01c1a000 0x100>;
-			interrupts = <0 72 4>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c1a400 {
-			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
-			reg = <0x01c1a400 0x100>;
-			interrupts = <0 73 4>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ehci1: usb@01c1b000 {
-			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
-			reg = <0x01c1b000 0x100>;
-			interrupts = <0 74 4>;
-			clocks = <&ahb1_gates 27>;
-			resets = <&ahb1_rst 27>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci1: usb@01c1b400 {
-			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
-			reg = <0x01c1b400 0x100>;
-			interrupts = <0 75 4>;
-			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
-			resets = <&ahb1_rst 30>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci2: usb@01c1c400 {
-			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
-			reg = <0x01c1c400 0x100>;
-			interrupts = <0 77 4>;
-			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
-			resets = <&ahb1_rst 31>;
-			status = "disabled";
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun6i-a31-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <0 11 4>,
-				     <0 15 4>,
-				     <0 16 4>,
-				     <0 17 4>;
-			clocks = <&apb1_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PH14", "PH15";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PH16", "PH17";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PH18", "PH19";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA8", "PA9", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA26", "PA27";
-				allwinner,function = "gmac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_gmii_a: gmac_gmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA4", "PA5", "PA6", "PA7",
-						"PA8", "PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14",	"PA15",
-						"PA16", "PA17", "PA18", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in GMII mode run at 125MHz and
-				 * might need a higher signal drive strength
-				 */
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <3>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 4>,
-				     <0 19 4>,
-				     <0 20 4>,
-				     <0 21 4>,
-				     <0 22 4>;
-			clocks = <&osc24M>;
-		};
-
-		wdt1: watchdog@01c20ca0 {
-			compatible = "allwinner,sun6i-a31-wdt";
-			reg = <0x01c20ca0 0x20>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
-			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
-			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
-			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
-			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
-			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart5: serial@01c29400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29400 0x400>;
-			interrupts = <0 5 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 21>;
-			resets = <&apb2_rst 21>;
-			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 6 4>;
-			clocks = <&apb2_gates 0>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <0 7 4>;
-			clocks = <&apb2_gates 1>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 1>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <0 8 4>;
-			clocks = <&apb2_gates 2>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 2>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b800 0x400>;
-			interrupts = <0 9 4>;
-			clocks = <&apb2_gates 3>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 3>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		gmac: ethernet@01c30000 {
-			compatible = "allwinner,sun7i-a20-gmac";
-			reg = <0x01c30000 0x1054>;
-			interrupts = <0 82 4>;
-			interrupt-names = "macirq";
-			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
-			clock-names = "stmmaceth", "allwinner_gmac_tx";
-			resets = <&ahb1_rst 17>;
-			reset-names = "stmmaceth";
-			snps,pbl = <2>;
-			snps,fixed-burst;
-			snps,force_sf_dma_mode;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		timer@01c60000 {
-			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <0 51 4>,
-				     <0 52 4>,
-				     <0 53 4>,
-				     <0 54 4>;
-			clocks = <&ahb1_gates 19>;
-			resets = <&ahb1_rst 19>;
-		};
-
-		spi0: spi@01c68000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c68000 0x1000>;
-			interrupts = <0 65 4>;
-			clocks = <&ahb1_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 23>, <&dma 23>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 20>;
-			status = "disabled";
-		};
-
-		spi1: spi@01c69000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c69000 0x1000>;
-			interrupts = <0 66 4>;
-			clocks = <&ahb1_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 24>, <&dma 24>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 21>;
-			status = "disabled";
-		};
-
-		spi2: spi@01c6a000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c6a000 0x1000>;
-			interrupts = <0 67 4>;
-			clocks = <&ahb1_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 25>, <&dma 25>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 22>;
-			status = "disabled";
-		};
-
-		spi3: spi@01c6b000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c6b000 0x1000>;
-			interrupts = <0 68 4>;
-			clocks = <&ahb1_gates 23>, <&spi3_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 26>, <&dma 26>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 23>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		nmi_intc: interrupt-controller@01f00c0c {
-			compatible = "allwinner,sun6i-a31-sc-nmi";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x01f00c0c 0x38>;
-			interrupts = <0 32 4>;
-		};
-
-		prcm@01f01400 {
-			compatible = "allwinner,sun6i-a31-prcm";
-			reg = <0x01f01400 0x200>;
-
-			ar100: ar100_clk {
-				compatible = "allwinner,sun6i-a31-ar100-clk";
-				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-				clock-output-names = "ar100";
-			};
-
-			ahb0: ahb0_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&ar100>;
-				clock-output-names = "ahb0";
-			};
-
-			apb0: apb0_clk {
-				compatible = "allwinner,sun6i-a31-apb0-clk";
-				#clock-cells = <0>;
-				clocks = <&ahb0>;
-				clock-output-names = "apb0";
-			};
-
-			apb0_gates: apb0_gates_clk {
-				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
-				#clock-cells = <1>;
-				clocks = <&apb0>;
-				clock-output-names = "apb0_pio", "apb0_ir",
-						"apb0_timer", "apb0_p2wi",
-						"apb0_uart", "apb0_1wire",
-						"apb0_i2c";
-			};
-
-			apb0_rst: apb0_rst {
-				compatible = "allwinner,sun6i-a31-clock-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		cpucfg@01f01c00 {
-			compatible = "allwinner,sun6i-a31-cpuconfig";
-			reg = <0x01f01c00 0x300>;
-		};
-
-		r_pio: pinctrl@01f02c00 {
-			compatible = "allwinner,sun6i-a31-r-pinctrl";
-			reg = <0x01f02c00 0x400>;
-			interrupts = <0 45 4>,
-				     <0 46 4>;
-			clocks = <&apb0_gates 0>;
-			resets = <&apb0_rst 0>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-		};
-	};
-};
diff --git a/src/arm/sun7i-a20-cubieboard2.dts b/src/arm/sun7i-a20-cubieboard2.dts
deleted file mode 100644
index 53680983461a..000000000000
--- a/src/arm/sun7i-a20-cubieboard2.dts
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Cubietech Cubieboard2";
-	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard2: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubieboard2>;
-
-		blue {
-			label = "cubieboard2:blue:usr";
-			gpios = <&pio 7 21 0>;
-		};
-
-		green {
-			label = "cubieboard2:green:usr";
-			gpios = <&pio 7 20 0>;
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun7i-a20-cubietruck.dts b/src/arm/sun7i-a20-cubietruck.dts
deleted file mode 100644
index a6c1a3c717bc..000000000000
--- a/src/arm/sun7i-a20-cubietruck.dts
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright 2013 Oliver Schinagl
- *
- * Oliver Schinagl <oliver@schinagl.nl>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Cubietech Cubietruck";
-	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 requires pull-up */
-				allwinner,pull = <1>;
-			};
-
-			vmmc3_pin_cubietruck: vmmc3_pin@0 {
-				allwinner,pins = "PH9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_cubietruck: led_pins@0 {
-				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		pwm: pwm@01c20e00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
-			status = "okay";
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubietruck>;
-
-		blue {
-			label = "cubietruck:blue:usr";
-			gpios = <&pio 7 21 0>;
-		};
-
-		orange {
-			label = "cubietruck:orange:usr";
-			gpios = <&pio 7 20 0>;
-		};
-
-		white {
-			label = "cubietruck:white:usr";
-			gpios = <&pio 7 11 0>;
-		};
-
-		green {
-			label = "cubietruck:green:usr";
-			gpios = <&pio 7 7 0>;
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-		gpio = <&pio 7 12 0>;
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
-	reg_vmmc3: vmmc3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_cubietruck>;
-		regulator-name = "vmmc3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 9 0>;
-	};
-};
diff --git a/src/arm/sun7i-a20-i12-tvbox.dts b/src/arm/sun7i-a20-i12-tvbox.dts
deleted file mode 100644
index 6a67712d417a..000000000000
--- a/src/arm/sun7i-a20-i12-tvbox.dts
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "I12 / Q5 / QT840A A20 tvbox";
-	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 / AP6330 requires pull-up */
-				allwinner,pull = <1>;
-			};
-
-			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-				allwinner,pins = "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_i12_tvbox: led_pins@0 {
-				allwinner,pins = "PH9", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			phy-supply = <&reg_gmac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_i12_tvbox>;
-
-		red {
-			label = "i12_tvbox:red:usr";
-			gpios = <&pio 7 9 1>;
-		};
-
-		blue {
-			label = "i12_tvbox:blue:usr";
-			gpios = <&pio 7 20 0>;
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
-	reg_vmmc3: vmmc3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
-		regulator-name = "vmmc3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 2 0>;
-	};
-
-	reg_vmmc3_io: vmmc3-io {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
-		regulator-name = "vmmc3-io";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		/* This controls VCC-PI, must be always on! */
-		regulator-always-on;
-		enable-active-high;
-		gpio = <&pio 7 12 0>;
-	};
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		enable-active-high;
-		gpio = <&pio 7 21 0>;
-	};
-};
diff --git a/src/arm/sun7i-a20-olinuxino-micro.dts b/src/arm/sun7i-a20-olinuxino-micro.dts
deleted file mode 100644
index 9d669cdf031d..000000000000
--- a/src/arm/sun7i-a20-olinuxino-micro.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A20-Olinuxino Micro";
-	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
-
-	aliases {
-		spi0 = &spi1;
-		spi1 = &spi2;
-	};
-
-	soc@01c00000 {
-		spi1: spi@01c06000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins_a>;
-			status = "okay";
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 11 0>; /* PH11 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		spi2: spi@01c17000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_pins_a>;
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
-				allwinner,pins = "PH11";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart6: serial@01c29800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart6_pins_a>;
-			status = "okay";
-		};
-
-		uart7: serial@01c29c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart7_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
-
-		green {
-			label = "a20-olinuxino-micro:green:usr";
-			gpios = <&pio 7 2 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun7i-a20-pcduino3.dts b/src/arm/sun7i-a20-pcduino3.dts
deleted file mode 100644
index 046dfc0d45d8..000000000000
--- a/src/arm/sun7i-a20-pcduino3.dts
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright 2014 Zoltan HERPAI
- * Zoltan HERPAI <wigyori@uid0.hu>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "LinkSprite pcDuino3";
-	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PH2";
-			};
-
-			led_pins_pcduino3: led_pins@0 {
-				allwinner,pins = "PH15", "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			key_pins_pcduino3: key_pins@0 {
-				allwinner,pins = "PH17", "PH18", "PH19";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_pcduino3>;
-
-		tx {
-			label = "pcduino3:green:tx";
-			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
-		};
-
-		rx {
-			label = "pcduino3:green:rx";
-			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_pcduino3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@0 {
-			label = "Key Back";
-			linux,code = <KEY_BACK>;
-			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
-		};
-		button@1 {
-			label = "Key Home";
-			linux,code = <KEY_HOME>;
-			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Key Menu";
-			linux,code = <KEY_MENU>;
-			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
-	reg_ahci_5v: ahci-5v {
-		gpio = <&pio 7 2 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun7i-a20.dtsi b/src/arm/sun7i-a20.dtsi
deleted file mode 100644
index 4011628c7381..000000000000
--- a/src/arm/sun7i-a20.dtsi
+++ /dev/null
@@ -1,988 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		ethernet0 = &gmac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
-		interrupts = <0 120 4>,
-			     <0 121 4>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-pll4-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		pll8: clk@01c20040 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-pll4-clk";
-			reg = <0x01c20040 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll8";
-		};
-
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
-				"ahb_nand", "ahb_sdram", "ahb_ace",
-				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
-				"ahb_spi2", "ahb_spi3", "ahb_sata",
-				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
-				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
-				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
-				"ahb_mali";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis0", "apb0_iis1",
-				"apb0_pio", "apb0_ir0", "apb0_ir1",
-				"apb0_iis2", "apb0_keypad";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_i2c3", "apb1_can",
-				"apb1_scr", "apb1_ps20", "apb1_ps21",
-				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
-				"apb1_uart2", "apb1_uart3", "apb1_uart4",
-				"apb1_uart5", "apb1_uart6", "apb1_uart7";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		pata_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "pata";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		ir1_clk: clk@01c200b4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir1";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
-		};
-
-		spi3_clk: clk@01c200d4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200d4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi3";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
-
-		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
-		 */
-		mii_phy_tx_clk: clk@2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-			clock-output-names = "mii_phy_tx";
-		};
-
-		gmac_int_tx_clk: clk@3 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <125000000>;
-			clock-output-names = "gmac_int_tx";
-		};
-
-		gmac_tx_clk: clk@01c20164 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-gmac-clk";
-			reg = <0x01c20164 0x4>;
-			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
-			clock-output-names = "gmac_tx";
-		};
-
-		/*
-		 * Dummy clock used by output clocks
-		 */
-		osc24M_32k: clk@1 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <750>;
-			clock-mult = <1>;
-			clocks = <&osc24M>;
-			clock-output-names = "osc24M_32k";
-		};
-
-		clk_out_a: clk@01c201f0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-out-clk";
-			reg = <0x01c201f0 0x4>;
-			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
-			clock-output-names = "clk_out_a";
-		};
-
-		clk_out_b: clk@01c201f4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-out-clk";
-			reg = <0x01c201f4 0x4>;
-			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
-			clock-output-names = "clk_out_b";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		nmi_intc: interrupt-controller@01c00030 {
-			compatible = "allwinner,sun7i-a20-sc-nmi";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x01c00030 0x0c>;
-			interrupts = <0 0 4>;
-		};
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <0 10 4>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <0 11 4>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-a10-emac";
-			reg = <0x01c0b000 0x1000>;
-			interrupts = <0 55 4>;
-			clocks = <&ahb_gates 17>;
-			status = "disabled";
-		};
-
-		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-a10-mdio";
-			reg = <0x01c0b080 0x14>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 32 4>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 33 4>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 34 4>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 35 4>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun7i-a20-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-			reg-names = "phy_ctrl", "pmu1", "pmu2";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <0 39 4>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <0 64 4>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <0 12 4>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ahci: sata@01c18000 {
-			compatible = "allwinner,sun4i-a10-ahci";
-			reg = <0x01c18000 0x1000>;
-			interrupts = <0 56 4>;
-			clocks = <&pll6 0>, <&ahb_gates 25>;
-			status = "disabled";
-		};
-
-		ehci1: usb@01c1c000 {
-			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
-			reg = <0x01c1c000 0x100>;
-			interrupts = <0 40 4>;
-			clocks = <&ahb_gates 3>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci1: usb@01c1c400 {
-			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
-			reg = <0x01c1c400 0x100>;
-			interrupts = <0 65 4>;
-			clocks = <&usb_clk 7>, <&ahb_gates 4>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi3: spi@01c1f000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c1f000 0x1000>;
-			interrupts = <0 50 4>;
-			clocks = <&ahb_gates 23>, <&spi3_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun7i-a20-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <0 28 4>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-				allwinner,function = "uart2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart6_pins_a: uart6@0 {
-				allwinner,pins = "PI12", "PI13";
-				allwinner,function = "uart6";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart7_pins_a: uart7@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "uart7";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			clk_out_a_pins_a: clk_out_a@0 {
-				allwinner,pins = "PI12";
-				allwinner,function = "clk_out_a";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			clk_out_b_pins_a: clk_out_b@0 {
-				allwinner,pins = "PI13";
-				allwinner,function = "clk_out_b";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA10",
-						"PA11", "PA12", "PA13",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <3>;
-				allwinner,pull = <0>;
-			};
-
-			spi1_pins_a: spi1@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-				allwinner,function = "spi1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			spi2_pins_a: spi2@0 {
-				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
-				allwinner,function = "spi2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			mmc3_pins_a: mmc3@0 {
-				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
-				allwinner,function = "mmc3";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			ir0_pins_a: ir0@0 {
-				    allwinner,pins = "PB3","PB4";
-				    allwinner,function = "ir0";
-				    allwinner,drive = <0>;
-				    allwinner,pull = <0>;
-			};
-
-			ir1_pins_a: ir1@0 {
-				    allwinner,pins = "PB22","PB23";
-				    allwinner,function = "ir1";
-				    allwinner,drive = <0>;
-				    allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <0 22 4>,
-				     <0 23 4>,
-				     <0 24 4>,
-				     <0 25 4>,
-				     <0 67 4>,
-				     <0 68 4>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		rtc: rtc@01c20d00 {
-			compatible = "allwinner,sun7i-a20-rtc";
-			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 4>;
-		};
-
-		pwm: pwm@01c20e00 {
-			compatible = "allwinner,sun7i-a20-pwm";
-			reg = <0x01c20e00 0xc>;
-			clocks = <&osc24M>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		ir0: ir@01c21800 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 6>, <&ir0_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <0 5 4>;
-			reg = <0x01c21800 0x40>;
-			status = "disabled";
-		};
-
-		ir1: ir@01c21c00 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 7>, <&ir1_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <0 6 4>;
-			reg = <0x01c21c00 0x40>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun7i-a20-sid";
-			reg = <0x01c23800 0x200>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <0 29 4>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <0 1 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <0 2 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <0 3 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <0 4 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <0 17 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 20>;
-			status = "disabled";
-		};
-
-		uart5: serial@01c29400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29400 0x400>;
-			interrupts = <0 18 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 21>;
-			status = "disabled";
-		};
-
-		uart6: serial@01c29800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29800 0x400>;
-			interrupts = <0 19 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 22>;
-			status = "disabled";
-		};
-
-		uart7: serial@01c29c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29c00 0x400>;
-			interrupts = <0 20 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 23>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 7 4>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <0 8 4>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <0 9 4>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b800 0x400>;
-			interrupts = <0 88 4>;
-			clocks = <&apb1_gates 3>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c4: i2c@01c2c000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2c000 0x400>;
-			interrupts = <0 89 4>;
-			clocks = <&apb1_gates 15>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		gmac: ethernet@01c50000 {
-			compatible = "allwinner,sun7i-a20-gmac";
-			reg = <0x01c50000 0x10000>;
-			interrupts = <0 85 4>;
-			interrupt-names = "macirq";
-			clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
-			clock-names = "stmmaceth", "allwinner_gmac_tx";
-			snps,pbl = <2>;
-			snps,fixed-burst;
-			snps,force_sf_dma_mode;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		hstimer@01c60000 {
-			compatible = "allwinner,sun7i-a20-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 4>,
-				     <0 82 4>,
-				     <0 83 4>,
-				     <0 84 4>;
-			clocks = <&ahb_gates 28>;
-		};
-
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
-		};
-	};
-};
diff --git a/src/arm/sun8i-a23-ippo-q8h-v5.dts b/src/arm/sun8i-a23-ippo-q8h-v5.dts
deleted file mode 100644
index 34002e3eba9d..000000000000
--- a/src/arm/sun8i-a23-ippo-q8h-v5.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun8i-a23.dtsi"
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v5)";
-	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		r_uart: serial@01f02800 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/sun8i-a23.dtsi b/src/arm/sun8i-a23.dtsi
deleted file mode 100644
index 54ac0787216a..000000000000
--- a/src/arm/sun8i-a23.dtsi
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &r_uart;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: osc24M_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: osc32k_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll6: pll6_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
-			clock-output-names = "pll6";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1_mux: ahb1_mux_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
-			clock-output-names = "ahb1_mux";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
-			clock-output-names = "ahb1";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_spinlock",
-					"ahb1_drc";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_codec", "apb1_pio",
-					"apb1_daudio0",	"apb1_daudio1";
-		};
-
-		apb2_mux: apb2_mux_clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-			clock-output-names = "apb2_mux";
-		};
-
-		apb2: apb2_clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-apb2-div-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb2_mux>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2",
-					"apb2_uart3", "apb2_uart4";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 4>,
-				     <0 19 4>;
-			clocks = <&osc24M>;
-		};
-
-		wdt0: watchdog@01c20ca0 {
-			compatible = "allwinner,sun6i-a31-wdt";
-			reg = <0x01c20ca0 0x20>;
-			interrupts = <0 25 4>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		prcm@01f01400 {
-			compatible = "allwinner,sun8i-a23-prcm";
-			reg = <0x01f01400 0x200>;
-
-			ar100: ar100_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&osc24M>;
-				clock-output-names = "ar100";
-			};
-
-			ahb0: ahb0_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&ar100>;
-				clock-output-names = "ahb0";
-			};
-
-			apb0: apb0_clk {
-				compatible = "allwinner,sun8i-a23-apb0-clk";
-				#clock-cells = <0>;
-				clocks = <&ahb0>;
-				clock-output-names = "apb0";
-			};
-
-			apb0_gates: apb0_gates_clk {
-				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
-				#clock-cells = <1>;
-				clocks = <&apb0>;
-				clock-output-names = "apb0_pio", "apb0_timer",
-						"apb0_rsb", "apb0_uart",
-						"apb0_i2c";
-			};
-
-			apb0_rst: apb0_rst {
-				compatible = "allwinner,sun6i-a31-clock-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		r_uart: serial@01f02800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01f02800 0x400>;
-			interrupts = <0 38 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb0_gates 4>;
-			resets = <&apb0_rst 4>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/sunxi-common-regulators.dtsi b/src/arm/sunxi-common-regulators.dtsi
deleted file mode 100644
index 3d021efd1a38..000000000000
--- a/src/arm/sunxi-common-regulators.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * sunxi boards common regulator (ahci target power supply, usb-vbus) code
- *
- * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	soc@01c00000 {
-		pio: pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PB8";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH6";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			usb2_vbus_pin_a: usb2_vbus_pin@0 {
-				allwinner,pins = "PH3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ahci_pwr_pin_a>;
-		regulator-name = "ahci-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&pio 1 8 0>;
-		status = "disabled";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		regulator-name = "usb1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&pio 7 6 0>;
-		status = "disabled";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_a>;
-		regulator-name = "usb2-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&pio 7 3 0>;
-		status = "disabled";
-	};
-
-	reg_vcc3v0: vcc3v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v0";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
diff --git a/src/arm/tegra114-dalmore.dts b/src/arm/tegra114-dalmore.dts
deleted file mode 100644
index 5c21d216515a..000000000000
--- a/src/arm/tegra114-dalmore.dts
+++ /dev/null
@@ -1,1286 +0,0 @@
-/*
- * This dts file supports Dalmore A04.
- * Other board revisions are not supported
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra114.dtsi"
-
-/ {
-	model = "NVIDIA Tegra114 Dalmore evaluation board";
-	compatible = "nvidia,dalmore", "nvidia,tegra114";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps65913@58";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			vdd-supply = <&vdd_hdmi_reg>;
-			pll-supply = <&palmas_smps3_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-
-		dsi@54300000 {
-			status = "okay";
-
-			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
-
-			panel@0 {
-				compatible = "panasonic,vvx10f004b00",
-					     "simple-panel";
-				reg = <0>;
-
-				power-supply = <&avdd_lcd_reg>;
-				backlight = <&backlight>;
-			};
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			clk1_out_pw4 {
-				nvidia,pins = "clk1_out_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2",
-						"dap1_fs_pn0",
-						"dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5",
-						"dap2_fs_pa2",
-						"dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5",
-						"dap4_dout_pp6",
-						"dap4_fs_pp4",
-						"dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0",
-						"dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0",
-						"ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1",
-						"ulpi_nxt_py2";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_stp_py3 {
-				nvidia,pins = "ulpi_stp_py3";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-						"cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			cam_mclk_pcc0 {
-				nvidia,pins = "cam_mclk_pcc0",
-						"pbb0";
-				nvidia,function = "vi_alt3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5",
-						"gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a16_pj7 {
-				nvidia,pins = "gmi_a16_pj7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a17_pb0 {
-				nvidia,pins = "gmi_a17_pb0",
-						"gmi_a18_pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_a19_pk7 {
-				nvidia,pins = "gmi_a19_pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad5_pg5 {
-				nvidia,pins = "gmi_ad5_pg5",
-						"gmi_cs6_n_pi3",
-						"gmi_wr_n_pi0";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad6_pg6 {
-				nvidia,pins = "gmi_ad6_pg6",
-						"gmi_ad7_pg7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad12_ph4 {
-				nvidia,pins = "gmi_ad12_ph4";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad9_ph1 {
-				nvidia,pins = "gmi_ad9_ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_cs1_n_pj2 {
-				nvidia,pins = "gmi_cs1_n_pj2",
-						"gmi_oe_n_pi1";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk2_out_pw5 {
-				nvidia,pins = "clk2_out_pw5";
-				nvidia,function = "extperiph2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_wp_n_pv3 {
-				nvidia,pins = "sdmmc1_wp_n_pv3";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"kb_col4_pq4",
-						"sdmmc3_clk_lb_out_pee4",
-						"sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7",
-						"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk_32k_out_pa0 {
-				nvidia,pins = "clk_32k_out_pa0";
-				nvidia,function = "blink";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col0_pq0 {
-				nvidia,pins = "kb_col0_pq0",
-						"kb_col1_pq1",
-						"kb_col2_pq2",
-						"kb_row0_pr0",
-						"kb_row1_pr1",
-						"kb_row2_pr2";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_din_pp1 {
-				nvidia,pins = "dap3_din_pp1",
-						"dap3_sclk_pp3";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row7_pr7 {
-				nvidia,pins = "kb_row7_pr7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-						"pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			sys_clk_req_pz5 {
-				nvidia,pins = "sys_clk_req_pz5";
-				nvidia,function = "sysclk";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "cpu";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gen1_i2c_scl_pc4 {
-				nvidia,pins = "gen1_i2c_scl_pc4",
-						"gen1_i2c_sda_pc5";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1",
-						"uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0",
-						"uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "owr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4",
-						"ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
-			};
-			spdif_in_pk6 {
-				nvidia,pins = "spdif_in_pk6";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x6_aud_px6 {
-				nvidia,pins = "gpio_x6_aud_px6";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x4_aud_px4 {
-				nvidia,pins = "gpio_x4_aud_px4",
-						"gpio_x7_aud_px7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x5_aud_px5 {
-				nvidia,pins = "gpio_x5_aud_px5";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w2_aud_pw2 {
-				nvidia,pins = "gpio_w2_aud_pw2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w3_aud_pw3 {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x1_aud_px1 {
-				nvidia,pins = "gpio_x1_aud_px1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x3_aud_px3 {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_fs_pp0 {
-				nvidia,pins = "dap3_fs_pp0";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_dout_pp2 {
-				nvidia,pins = "dap3_dout_pp2";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pbb3 {
-				nvidia,pins = "pbb3",
-						"pbb5",
-						"pbb6",
-						"pbb7";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pcc1 {
-				nvidia,pins = "pcc1",
-						"pcc2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad0_pg0 {
-				nvidia,pins = "gmi_ad0_pg0",
-						"gmi_ad1_pg1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad10_ph2 {
-				nvidia,pins = "gmi_ad10_ph2",
-						"gmi_ad11_ph3",
-						"gmi_ad13_ph5",
-						"gmi_ad8_ph0",
-						"gmi_clk_pk1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad2_pg2 {
-				nvidia,pins = "gmi_ad2_pg2",
-						"gmi_ad3_pg3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_adv_n_pk0 {
-				nvidia,pins = "gmi_adv_n_pk0",
-						"gmi_cs0_n_pj0",
-						"gmi_cs2_n_pk3",
-						"gmi_cs4_n_pk2",
-						"gmi_cs7_n_pi6",
-						"gmi_dqs_p_pj3",
-						"gmi_iordy_pi5",
-						"gmi_wp_n_pc7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_cs3_n_pk4 {
-				nvidia,pins = "gmi_cs3_n_pk4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col3_pq3 {
-				nvidia,pins = "kb_col3_pq3",
-						"kb_col6_pq6",
-						"kb_col7_pq7";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col5_pq5 {
-				nvidia,pins = "kb_col5_pq5";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row3_pr3 {
-				nvidia,pins = "kb_row3_pr3",
-						"kb_row4_pr4",
-						"kb_row6_pr6",
-						"kb_row8_ps0";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk3_req_pee1 {
-				nvidia,pins = "clk3_req_pee1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu4 {
-				nvidia,pins = "pu4";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu5 {
-				nvidia,pins = "pu5",
-						"pu6";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk1_req_pee2 {
-				nvidia,pins = "clk1_req_pee2",
-						"usb_vbus_en1_pn5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <36>;
-				nvidia,pull-up-strength = <20>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
-			};
-			drive_sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <22>;
-				nvidia,pull-up-strength = <36>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_gma {
-				nvidia,pins = "drive_gma";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <2>;
-				nvidia,pull-up-strength = <1>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-		};
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		battery: smart-battery@b {
-			compatible = "ti,bq20z45", "sbs,sbs-battery";
-			reg = <0xb>;
-			battery-name = "battery";
-			sbs,i2c-retry-count = <2>;
-			sbs,poll-retry-count = <100>;
-			power-supplies = <&charger>;
-		};
-
-		rt5640: rt5640@1c {
-			compatible = "realtek,rt5640";
-			reg = <0x1c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
-			realtek,ldo1-en-gpios =
-				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&palmas_ldo6_reg>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c700 {
-		status = "okay";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		tps51632@43 {
-			compatible = "ti,tps51632";
-			reg = <0x43>;
-			regulator-name = "vdd-cpu";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1520000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		tps65090@48 {
-			compatible = "ti,tps65090";
-			reg = <0x48>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>;
-
-			vsys1-supply = <&vdd_ac_bat_reg>;
-			vsys2-supply = <&vdd_ac_bat_reg>;
-			vsys3-supply = <&vdd_ac_bat_reg>;
-			infet1-supply = <&vdd_ac_bat_reg>;
-			infet2-supply = <&vdd_ac_bat_reg>;
-			infet3-supply = <&tps65090_dcdc2_reg>;
-			infet4-supply = <&tps65090_dcdc2_reg>;
-			infet5-supply = <&tps65090_dcdc2_reg>;
-			infet6-supply = <&tps65090_dcdc2_reg>;
-			infet7-supply = <&tps65090_dcdc2_reg>;
-			vsys-l1-supply = <&vdd_ac_bat_reg>;
-			vsys-l2-supply = <&vdd_ac_bat_reg>;
-
-			charger: charger {
-				compatible = "ti,tps65090-charger";
-				ti,enable-low-current-chrg;
-			};
-
-			regulators {
-				tps65090_dcdc1_reg: dcdc1 {
-					regulator-name = "vdd-sys-5v0";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				tps65090_dcdc2_reg: dcdc2 {
-					regulator-name = "vdd-sys-3v3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				tps65090_dcdc3_reg: dcdc3 {
-					regulator-name = "vdd-ao";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_bl_reg: fet1 {
-					regulator-name = "vdd-lcd-bl";
-				};
-
-				fet3 {
-					regulator-name = "vdd-modem-3v3";
-				};
-
-				avdd_lcd_reg: fet4 {
-					regulator-name = "avdd-lcd";
-				};
-
-				fet5 {
-					regulator-name = "vdd-lvds";
-				};
-
-				fet6 {
-					regulator-name = "vdd-sd-slot";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				fet7 {
-					regulator-name = "vdd-com-3v3";
-				};
-
-				ldo1 {
-					regulator-name = "vdd-sby-5v0";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd-sby-3v3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		palmas: tps65913@58 {
-			compatible = "ti,palmas";
-			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			palmas_gpio: gpio {
-				compatible = "ti,palmas-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			pmic {
-				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
-				smps1-in-supply = <&tps65090_dcdc3_reg>;
-				smps3-in-supply = <&tps65090_dcdc3_reg>;
-				smps4-in-supply = <&tps65090_dcdc2_reg>;
-				smps7-in-supply = <&tps65090_dcdc2_reg>;
-				smps8-in-supply = <&tps65090_dcdc2_reg>;
-				smps9-in-supply = <&tps65090_dcdc2_reg>;
-				ldo1-in-supply = <&tps65090_dcdc2_reg>;
-				ldo2-in-supply = <&tps65090_dcdc2_reg>;
-				ldo3-in-supply = <&palmas_smps3_reg>;
-				ldo4-in-supply = <&tps65090_dcdc2_reg>;
-				ldo5-in-supply = <&vdd_ac_bat_reg>;
-				ldo6-in-supply = <&tps65090_dcdc2_reg>;
-				ldo7-in-supply = <&tps65090_dcdc2_reg>;
-				ldo8-in-supply = <&tps65090_dcdc3_reg>;
-				ldo9-in-supply = <&palmas_smps9_reg>;
-				ldoln-in-supply = <&tps65090_dcdc1_reg>;
-				ldousb-in-supply = <&tps65090_dcdc1_reg>;
-
-				regulators {
-					smps12 {
-						regulator-name = "vddio-ddr";
-						regulator-min-microvolt = <1350000>;
-						regulator-max-microvolt = <1350000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					palmas_smps3_reg: smps3 {
-						regulator-name = "vddio-1v8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps45 {
-						regulator-name = "vdd-core";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1400000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps457 {
-						regulator-name = "vdd-core";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1400000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps8 {
-						regulator-name = "avdd-pll";
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					palmas_smps9_reg: smps9 {
-						regulator-name = "sdhci-vdd-sd-slot";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-						regulator-always-on;
-					};
-
-					ldo1 {
-						regulator-name = "avdd-cam1";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					ldo2 {
-						regulator-name = "avdd-cam2";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					avdd_1v2_reg: ldo3 {
-						regulator-name = "avdd-dsi-csi";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					ldo4 {
-						regulator-name = "vpp-fuse";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					palmas_ldo6_reg: ldo6 {
-						regulator-name = "vdd-sensor-2v85";
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					ldo7 {
-						regulator-name = "vdd-af-cam1";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					ldo8 {
-						regulator-name = "vdd-rtc";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <900000>;
-						regulator-always-on;
-						regulator-boot-on;
-						ti,enable-ldo8-tracking;
-					};
-
-					ldo9 {
-						regulator-name = "vddio-sdmmc-2";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldoln {
-						regulator-name = "hvdd-usb";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					ldousb {
-						regulator-name = "avdd-usb";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					regen1 {
-						regulator-name = "rail-3v3";
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					regen2 {
-						regulator-name = "rail-5v0";
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-				};
-			};
-
-			rtc {
-				compatible = "ti,palmas-rtc";
-				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
-			};
-
-			pinmux {
-				compatible = "ti,tps65913-pinctrl";
-				pinctrl-names = "default";
-				pinctrl-0 = <&palmas_default>;
-
-				palmas_default: pinmux {
-					pin_gpio6 {
-						pins = "gpio6";
-						function = "gpio";
-					};
-				};
-			};
-		};
-	};
-
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q32dw";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <500>;
-		nvidia,cpu-pwr-off-time = <300>;
-		nvidia,core-pwr-good-time = <641 3845>;
-		nvidia,core-pwr-off-time = <61036>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	ahub@70080000 {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000400 {
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		status = "okay";
-	};
-
-	sdhci@78000600 {
-		bus-width = <8>;
-		status = "okay";
-		non-removable;
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&usb3_vbus_reg>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 1 1000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		home {
-			label = "Home";
-			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		volume_down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		volume_up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_ac_bat_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		dvdd_ts_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dvdd_ts";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-
-		usb3_vbus_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-
-		vdd_hdmi_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_hdmi_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-
-		vdd_cam_1v8_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd_cam_1v8_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&palmas_gpio 6 0>;
-		};
-
-		vdd_5v0_hdmi: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "VDD_5V0_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-rt5640-dalmore",
-			     "nvidia,tegra-audio-rt5640";
-		nvidia,model = "NVIDIA Tegra Dalmore";
-
-		nvidia,audio-routing =
-			"Headphones", "HPOR",
-			"Headphones", "HPOL",
-			"Speakers", "SPORP",
-			"Speakers", "SPORN",
-			"Speakers", "SPOLP",
-			"Speakers", "SPOLN",
-			"Mic Jack", "MICBIAS1",
-			"IN2P", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5640>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
-			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA114_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra114-roth.dts b/src/arm/tegra114-roth.dts
deleted file mode 100644
index c7c6825f11fb..000000000000
--- a/src/arm/tegra114-roth.dts
+++ /dev/null
@@ -1,1125 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra114.dtsi"
-
-/ {
-	model = "NVIDIA SHIELD";
-	compatible = "nvidia,roth", "nvidia,tegra114";
-
-	chosen {
-		/* SHIELD's bootloader's arguments need to be overridden */
-		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
-		/* SHIELD's bootloader will place initrd at this address */
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
-
-	memory {
-		/* memory >= 0x79600000 is reserved for firmware usage */
-		reg = <0x80000000 0x79600000>;
-	};
-
-	host1x@50000000 {
-		dsi@54300000 {
-			status = "okay";
-
-			vdd-supply = <&vdd_1v2_ap>;
-
-			panel@0 {
-				compatible = "lg,lh500wx1-sd03";
-				reg = <0>;
-
-				power-supply = <&vdd_lcd>;
-				backlight = <&backlight>;
-			};
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			clk1_out_pw4 {
-				nvidia,pins = "clk1_out_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2",
-						"dap1_fs_pn0",
-						"dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5",
-						"dap2_fs_pa2",
-						"dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5",
-						"dap4_dout_pp6",
-						"dap4_fs_pp4",
-						"dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0",
-						"dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0",
-						"ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1",
-						"ulpi_nxt_py2";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_stp_py3 {
-				nvidia,pins = "ulpi_stp_py3";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-						"cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			cam_mclk_pcc0 {
-				nvidia,pins = "cam_mclk_pcc0",
-						"pbb0";
-				nvidia,function = "vi_alt3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			pbb4 {
-				nvidia,pins = "pbb4";
-				nvidia,function = "vgp4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5",
-						"gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a16_pj7 {
-				nvidia,pins = "gmi_a16_pj7",
-						"gmi_a19_pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a17_pb0 {
-				nvidia,pins = "gmi_a17_pb0",
-						"gmi_a18_pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad5_pg5 {
-				nvidia,pins = "gmi_ad5_pg5",
-						"gmi_wr_n_pi0";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad6_pg6 {
-				nvidia,pins = "gmi_ad6_pg6",
-						"gmi_ad7_pg7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad12_ph4 {
-				nvidia,pins = "gmi_ad12_ph4";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_cs6_n_pi13 {
-				nvidia,pins = "gmi_cs6_n_pi3";
-				nvidia,function = "nand";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad9_ph1 {
-				nvidia,pins = "gmi_ad9_ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_cs1_n_pj2 {
-				nvidia,pins = "gmi_cs1_n_pj2",
-						"gmi_oe_n_pi1";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_rst_n_pi4 {
-				nvidia,pins = "gmi_rst_n_pi4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_iordy_pi5 {
-				nvidia,pins = "gmi_iordy_pi5";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk2_out_pw5 {
-				nvidia,pins = "clk2_out_pw5";
-				nvidia,function = "extperiph2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"sdmmc3_cd_n_pv2",
-						"sdmmc3_clk_lb_out_pee4",
-						"sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col4_pq4 {
-				nvidia,pins = "kb_col4_pq4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7",
-						"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk_32k_out_pa0 {
-				nvidia,pins = "clk_32k_out_pa0";
-				nvidia,function = "blink";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col0_pq0 {
-				nvidia,pins = "kb_col0_pq0",
-						"kb_col1_pq1",
-						"kb_col2_pq2",
-						"kb_row0_pr0",
-						"kb_row1_pr1",
-						"kb_row2_pr2",
-						"kb_row8_ps0";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row7_pr7 {
-				nvidia,pins = "kb_row7_pr7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-						"pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			sys_clk_req_pz5 {
-				nvidia,pins = "sys_clk_req_pz5";
-				nvidia,function = "sysclk";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "cpu";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gen1_i2c_scl_pc4 {
-				nvidia,pins = "gen1_i2c_scl_pc4",
-						"gen1_i2c_sda_pc5";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1",
-						"uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0",
-						"uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "owr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4",
-						"ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
-			};
-			spdif_in_pk6 {
-				nvidia,pins = "spdif_in_pk6";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x6_aud_px6 {
-				nvidia,pins = "gpio_x6_aud_px6";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x1_aud_px1 {
-				nvidia,pins = "gpio_x1_aud_px1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x7_aud_px7 {
-				nvidia,pins = "gpio_x7_aud_px7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_adv_n_pk0 {
-				nvidia,pins = "gmi_adv_n_pk0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_cs0_n_pj0 {
-				nvidia,pins = "gmi_cs0_n_pj0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu3 {
-				nvidia,pins = "pu3";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x4_aud_px4 {
-				nvidia,pins = "gpio_x4_aud_px4",
-						"gpio_x5_aud_px5";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x3_aud_px3 {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w2_aud_pw2 {
-				nvidia,pins = "gpio_w2_aud_pw2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w3_aud_pw3 {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_fs_pp0 {
-				nvidia,pins = "dap3_fs_pp0",
-						"dap3_din_pp1",
-						"dap3_dout_pp2",
-						"dap3_sclk_pp3";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pbb3 {
-				nvidia,pins = "pbb3",
-						"pbb5",
-						"pbb6",
-						"pbb7";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pcc1 {
-				nvidia,pins = "pcc1",
-						"pcc2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad0_pg0 {
-				nvidia,pins = "gmi_ad0_pg0",
-						"gmi_ad1_pg1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad10_ph2 {
-				nvidia,pins = "gmi_ad10_ph2",
-						"gmi_ad12_ph4",
-						"gmi_ad15_ph7",
-						"gmi_cs3_n_pk4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad11_ph3 {
-				nvidia,pins = "gmi_ad11_ph3",
-						"gmi_ad13_ph5",
-						"gmi_ad8_ph0",
-						"gmi_clk_pk1",
-						"gmi_cs2_n_pk3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad14_ph6 {
-				nvidia,pins = "gmi_ad14_ph6",
-						"gmi_cs0_n_pj0",
-						"gmi_cs4_n_pk2",
-						"gmi_cs7_n_pi6",
-						"gmi_dqs_p_pj3",
-						"gmi_wp_n_pc7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad2_pg2 {
-				nvidia,pins = "gmi_ad2_pg2",
-						"gmi_ad3_pg3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_wp_n_pv3 {
-				nvidia,pins = "sdmmc1_wp_n_pv3";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col3_pq3 {
-				nvidia,pins = "kb_col3_pq3";
-				nvidia,function = "pwm2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col5_pq5 {
-				nvidia,pins = "kb_col5_pq5";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col6_pq6 {
-				nvidia,pins = "kb_col6_pq6",
-						"kb_col7_pq7";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row3_pr3 {
-				nvidia,pins = "kb_row3_pr3",
-						"kb_row4_pr4",
-						"kb_row6_pr6";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk3_req_pee1 {
-				nvidia,pins = "clk3_req_pee1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu2 {
-				nvidia,pins = "pu2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <36>;
-				nvidia,pull-up-strength = <20>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
-			};
-			drive_sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <36>;
-				nvidia,pull-up-strength = <20>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_gma {
-				nvidia,pins = "drive_gma";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <2>;
-				nvidia,pull-up-strength = <2>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-		};
-	};
-
-	/* Usable on reworked devices only */
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		regulator@43 {
-			compatible = "ti,tps51632";
-			reg = <0x43>;
-			regulator-name = "vdd-cpu";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1520000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		palmas: pmic@58 {
-			compatible = "ti,palmas";
-			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			palmas_gpio: gpio {
-				compatible = "ti,palmas-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			pmic {
-				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
-
-				regulators {
-					smps12 {
-						regulator-name = "vdd-ddr";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1500000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v8: smps3 {
-						regulator-name = "vdd-1v8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-boot-on;
-					};
-
-					smps457 {
-						regulator-name = "vdd-soc";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1400000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps8 {
-						regulator-name = "avdd-pll-1v05";
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps9 {
-						regulator-name = "vdd-2v85-emmc";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-						regulator-always-on;
-					};
-
-					smps10_out1 {
-						regulator-name = "vdd-fan";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps10_out2 {
-						regulator-name = "vdd-5v0-sys";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo2 {
-						regulator-name = "vdd-2v8-display";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v2_ap: ldo3 {
-						regulator-name = "avdd-1v2";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo4 {
-						regulator-name = "vpp-fuse";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					ldo5 {
-						regulator-name = "avdd-hdmi-pll";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					ldo6 {
-						regulator-name = "vdd-sensor-2v8";
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					ldo8 {
-						regulator-name = "vdd-rtc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
-						regulator-always-on;
-						regulator-boot-on;
-						ti,enable-ldo8-tracking;
-					};
-
-					vddio_sdmmc3: ldo9 {
-						regulator-name = "vddio-sdmmc3";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldousb {
-						regulator-name = "avdd-usb-hdmi";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_3v3_sys: regen1 {
-						regulator-name = "rail-3v3";
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					regen2 {
-						regulator-name = "rail-5v0";
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-				};
-			};
-
-			rtc {
-				compatible = "ti,palmas-rtc";
-				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
-			};
-
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-	};
-
-	/* SD card */
-	sdhci@78000400 {
-		status = "okay";
-		bus-width = <4>;
-		vmmc-supply = <&vddio_sdmmc3>;
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
-	};
-
-	/* eMMC */
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
-		non-removable;
-	};
-
-	/* External USB port (must be powered) */
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		nvidia,xcvr-setup = <7>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		/* Should be changed to "otg" once we have vbus_supply */
-		/* As of now, USB devices need to be powered externally */
-		dr_mode = "host";
-	};
-
-	/* SHIELD controller */
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		nvidia,xcvr-setup = <7>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 1 40000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-		power-supply = <&lcd_bl_en>;
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		back {
-			label = "Back";
-			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		lcd_bl_en: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd_bl_en";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-		};
-
-		vdd_lcd: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_lcd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&vdd_1v8>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v8_ts";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
-			regulator-boot-on;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_3v3_ts";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_1v8_com";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&vdd_1v8>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
-
-		regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_3v3_com";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_sys>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/src/arm/tegra114-tn7.dts b/src/arm/tegra114-tn7.dts
deleted file mode 100644
index 963662145635..000000000000
--- a/src/arm/tegra114-tn7.dts
+++ /dev/null
@@ -1,348 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra114.dtsi"
-
-/ {
-	model = "Tegra Note 7";
-	compatible = "nvidia,tn7", "nvidia,tegra114";
-
-	chosen {
-		/* TN7's bootloader's arguments need to be overridden */
-		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
-		/* TN7's bootloader will place initrd at this address */
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
-
-	memory {
-		/* memory >= 0x37e00000 is reserved for firmware usage */
-		reg = <0x80000000 0x37e00000>;
-	};
-
-	host1x@50000000 {
-		dsi@54300000 {
-			status = "okay";
-
-			vdd-supply = <&vdd_1v2_ap>;
-
-			panel@0 {
-				compatible = "lg,ld070wx3-sl01";
-				reg = <0>;
-
-				power-supply = <&vdd_lcd>;
-				backlight = <&backlight>;
-			};
-		};
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		palmas: pmic@58 {
-			compatible = "ti,palmas";
-			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			palmas_gpio: gpio {
-				compatible = "ti,palmas-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			pmic {
-				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
-
-				ldoln-in-supply = <&vdd_smps10_out2>;
-
-				regulators {
-					smps123 {
-						regulator-name = "vd-cpu";
-						regulator-min-microvolt = <1000000>;
-						regulator-max-microvolt = <1000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps45 {
-						regulator-name = "vd-soc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps6 {
-						regulator-name = "va-lcd-hv";
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps7 {
-						regulator-name = "vd-ddr";
-						regulator-min-microvolt = <1350000>;
-						regulator-max-microvolt = <1350000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v8: smps8 {
-						regulator-name = "vs-pmu-1v8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_2v9_sys: smps9 {
-						regulator-name = "vs-sys-2v9";
-						regulator-min-microvolt = <2900000>;
-						regulator-max-microvolt = <2900000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_smps10_out1: smps10_out1 {
-						regulator-name = "vd-smps10-out1";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_smps10_out2: smps10_out2 {
-						regulator-name = "vd-smps10-out2";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo1 {
-						regulator-name = "va-pllx";
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v2_ap: ldo2 {
-						regulator-name = "va-ap-1v2";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo3 {
-						regulator-name = "vd-fuse";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo4 {
-						regulator-name = "vd-ts-hv";
-						regulator-min-microvolt = <3200000>;
-						regulator-max-microvolt = <3200000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo5 {
-						regulator-name = "va-cam2-hv";
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					ldo6 {
-						regulator-name = "va-sns-hv";
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					ldo7 {
-						regulator-name = "va-cam1-hv";
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					ldo8 {
-						regulator-name = "va-ap-rtc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
-						ti,enable-ldo8-tracking;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo9 {
-						regulator-name = "vi-sdcard";
-						regulator-min-microvolt = <2900000>;
-						regulator-max-microvolt = <2900000>;
-					};
-
-					ldousb {
-						regulator-name = "avdd-usb";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldoln {
-						regulator-name = "va-hdmi";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-				};
-			};
-
-			rtc {
-				compatible = "ti,palmas-rtc";
-				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
-			};
-
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-	};
-
-	/* eMMC */
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
-		non-removable;
-	};
-
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		nvidia,xcvr-setup = <7>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		/* Should be changed to "otg" once we have vbus_supply */
-		/* As of now, USB devices need to be powered externally */
-		dr_mode = "host";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 1 40000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-		power-supply = <&lcd_bl_en>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		volume_down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		volume_up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* FIXME: output of BQ24192 */
-		vs_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VS_SYS";
-			regulator-min-microvolt = <4200000>;
-			regulator-max-microvolt = <4200000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		lcd_bl_en: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_LCD_BL";
-			regulator-min-microvolt = <16500000>;
-			regulator-max-microvolt = <16500000>;
-			gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vs_sys>;
-			regulator-boot-on;
-		};
-
-		vdd_lcd: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "VD_LCD_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_1v8>;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/src/arm/tegra114.dtsi b/src/arm/tegra114.dtsi
deleted file mode 100644
index 80b8eddb4105..000000000000
--- a/src/arm/tegra114.dtsi
+++ /dev/null
@@ -1,767 +0,0 @@
-#include <dt-bindings/clock/tegra114-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra114";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-	};
-
-	host1x@50000000 {
-		compatible = "nvidia,tegra114-host1x", "simple-bus";
-		reg = <0x50000000 0x00028000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x01000000>;
-
-		gr2d@54140000 {
-			compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d@54180000 {
-			compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_DISP1>,
-				 <&tegra_car TEGRA114_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_DISP2>,
-				 <&tegra_car TEGRA114_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi@54280000 {
-			compatible = "nvidia,tegra114-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_HDMI>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		dsi@54300000 {
-			compatible = "nvidia,tegra114-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
-				 <&tegra_car TEGRA114_CLK_DSIALP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
-			clock-names = "dsi", "lp", "parent";
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		dsi@54400000 {
-			compatible = "nvidia,tegra114-dsi";
-			reg = <0x54400000 0x00040000>;
-			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
-				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
-			clock-names = "dsi", "lp", "parent";
-			resets = <&tegra_car 82>;
-			reset-names = "dsi";
-			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	gic: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x50041000 0x1000>,
-		      <0x50042000 0x1000>,
-		      <0x50044000 0x2000>,
-		      <0x50046000 0x2000>;
-		interrupts = <GIC_PPI 9
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer@60005000 {
-		compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer";
-		reg = <0x60005000 0x400>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_TIMER>;
-	};
-
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra114-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra114-apbdma";
-		reg = <0x6000a000 0x1400>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	ahb: ahb@6000c004 {
-		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>;
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
-		reg = <0x6000d000 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
-	};
-
-	pinmux: pinmux@70000868 {
-		compatible = "nvidia,tegra114-pinmux";
-		reg = <0x70000868 0x148		/* Pad control registers */
-		       0x70003000 0x40c>;	/* Mux registers */
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
-	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
-	 */
-	uarta: serial@70006000 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartb: serial@70006040 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartc: serial@70006200 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartd: serial@70006300 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA114_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C1>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c400 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c400 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C2>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c500 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C3>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c700 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c700 0x100>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C4>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 103>;
-		reset-names = "i2c";
-		dmas = <&apbdma 26>, <&apbdma 26>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000d000 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000d000 0x100>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C5>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d400 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000d400 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC1>;
-		clock-names = "spi";
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d600 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000d600 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC2>;
-		clock-names = "spi";
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d800 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000d800 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC3>;
-		clock-names = "spi";
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000da00 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000da00 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC4>;
-		clock-names = "spi";
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000dc00 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000dc00 0x200>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC5>;
-		clock-names = "spi";
-		resets = <&tegra_car 104>;
-		reset-names = "spi";
-		dmas = <&apbdma 27>, <&apbdma 27>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000de00 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000de00 0x200>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC6>;
-		clock-names = "spi";
-		resets = <&tegra_car 105>;
-		reset-names = "spi";
-		dmas = <&apbdma 28>, <&apbdma 28>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	rtc@7000e000 {
-		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_RTC>;
-	};
-
-	kbc@7000e200 {
-		compatible = "nvidia,tegra114-kbc";
-		reg = <0x7000e200 0x100>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_KBC>;
-		resets = <&tegra_car 36>;
-		reset-names = "kbc";
-		status = "disabled";
-	};
-
-	pmc@7000e400 {
-		compatible = "nvidia,tegra114-pmc";
-		reg = <0x7000e400 0x400>;
-		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra114-efuse";
-		reg = <0x7000f800 0x400>;
-		clocks = <&tegra_car TEGRA114_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	iommu@70019010 {
-		compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
-		reg = <0x70019010 0x02c
-		       0x700191f0 0x010
-		       0x70019228 0x074>;
-		nvidia,#asids = <4>;
-		dma-window = <0 0x40000000>;
-		nvidia,swgroups = <0x18659fe>;
-		nvidia,ahb = <&ahb>;
-	};
-
-	ahub@70080000 {
-		compatible = "nvidia,tegra114-ahub";
-		reg = <0x70080000 0x200>,
-		      <0x70080200 0x100>,
-		      <0x70081000 0x200>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
-			 <&tegra_car TEGRA114_CLK_APBIF>;
-		clock-names = "d_audio", "apbif";
-		resets = <&tegra_car 106>, /* d_audio */
-			 <&tegra_car 107>, /* apbif */
-			 <&tegra_car 30>,  /* i2s0 */
-			 <&tegra_car 11>,  /* i2s1 */
-			 <&tegra_car 18>,  /* i2s2 */
-			 <&tegra_car 101>, /* i2s3 */
-			 <&tegra_car 102>, /* i2s4 */
-			 <&tegra_car 108>, /* dam0 */
-			 <&tegra_car 109>, /* dam1 */
-			 <&tegra_car 110>, /* dam2 */
-			 <&tegra_car 10>,  /* spdif */
-			 <&tegra_car 153>, /* amx */
-			 <&tegra_car 154>; /* adx */
-		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
-			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
-			      "spdif", "amx", "adx";
-		dmas = <&apbdma 1>, <&apbdma 1>,
-		       <&apbdma 2>, <&apbdma 2>,
-		       <&apbdma 3>, <&apbdma 3>,
-		       <&apbdma 4>, <&apbdma 4>,
-		       <&apbdma 6>, <&apbdma 6>,
-		       <&apbdma 7>, <&apbdma 7>,
-		       <&apbdma 12>, <&apbdma 12>,
-		       <&apbdma 13>, <&apbdma 13>,
-		       <&apbdma 14>, <&apbdma 14>,
-		       <&apbdma 29>, <&apbdma 29>;
-		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
-			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
-			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
-			    "rx9", "tx9";
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		tegra_i2s0: i2s@70080300 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080300 0x100>;
-			nvidia,ahub-cif-ids = <4 4>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S0>;
-			resets = <&tegra_car 30>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s1: i2s@70080400 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080400 0x100>;
-			nvidia,ahub-cif-ids = <5 5>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S1>;
-			resets = <&tegra_car 11>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s2: i2s@70080500 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080500 0x100>;
-			nvidia,ahub-cif-ids = <6 6>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S2>;
-			resets = <&tegra_car 18>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s3: i2s@70080600 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080600 0x100>;
-			nvidia,ahub-cif-ids = <7 7>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S3>;
-			resets = <&tegra_car 101>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s4: i2s@70080700 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080700 0x100>;
-			nvidia,ahub-cif-ids = <8 8>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S4>;
-			resets = <&tegra_car 102>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-	};
-
-	mipi: mipi@700e3000 {
-		compatible = "nvidia,tegra114-mipi";
-		reg = <0x700e3000 0x100>;
-		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-		#nvidia,mipi-calibrate-cells = <1>;
-	};
-
-	sdhci@78000000 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000000 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000200 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000200 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000400 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000400 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000600 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000600 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d000000 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@7d000000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USBD>,
-			 <&tegra_car TEGRA114_CLK_PLL_U>,
-			 <&tegra_car TEGRA114_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d008000 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@7d008000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USB3>,
-			 <&tegra_car TEGRA114_CLK_PLL_U>,
-			 <&tegra_car TEGRA114_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/src/arm/tegra124-jetson-tk1.dts b/src/arm/tegra124-jetson-tk1.dts
deleted file mode 100644
index 624b0fba2d0a..000000000000
--- a/src/arm/tegra124-jetson-tk1.dts
+++ /dev/null
@@ -1,1854 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra124.dtsi"
-
-/ {
-	model = "NVIDIA Tegra124 Jetson TK1";
-	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
-
-	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
-	};
-
-	memory {
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			pll-supply = <&vdd_hdmi_pll>;
-			vdd-supply = <&vdd_3v3_hdmi>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux: pinmux@0,70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			clk_32k_out_pa0 {
-				nvidia,pins = "clk_32k_out_pa0";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins = "dap2_fs_pa2";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_sclk_pa3 {
-				nvidia,pins = "dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pb0 {
-				nvidia,pins = "pb0";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pb1 {
-				nvidia,pins = "pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat3_pb4 {
-				nvidia,pins = "sdmmc3_dat3_pb4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat2_pb5 {
-				nvidia,pins = "sdmmc3_dat2_pb5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat1_pb6 {
-				nvidia,pins = "sdmmc3_dat1_pb6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat0_pb7 {
-				nvidia,pins = "sdmmc3_dat0_pb7";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gen1_i2c_scl_pc4 {
-				nvidia,pins = "gen1_i2c_scl_pc4";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gen1_i2c_sda_pc5 {
-				nvidia,pins = "gen1_i2c_sda_pc5";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pc7 {
-				nvidia,pins = "pc7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pg0 {
-				nvidia,pins = "pg0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg1 {
-				nvidia,pins = "pg1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg2 {
-				nvidia,pins = "pg2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pg3 {
-				nvidia,pins = "pg3";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pg4 {
-				nvidia,pins = "pg4";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg5 {
-				nvidia,pins = "pg5";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg6 {
-				nvidia,pins = "pg6";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg7 {
-				nvidia,pins = "pg7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph0 {
-				nvidia,pins = "ph0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph1 {
-				nvidia,pins = "ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph2 {
-				nvidia,pins = "ph2";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph3 {
-				nvidia,pins = "ph3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph4 {
-				nvidia,pins = "ph4";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph5 {
-				nvidia,pins = "ph5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph6 {
-				nvidia,pins = "ph6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph7 {
-				nvidia,pins = "ph7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi0 {
-				nvidia,pins = "pi0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi1 {
-				nvidia,pins = "pi1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi2 {
-				nvidia,pins = "pi2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi3 {
-				nvidia,pins = "pi3";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi4 {
-				nvidia,pins = "pi4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi5 {
-				nvidia,pins = "pi5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pi6 {
-				nvidia,pins = "pi6";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pi7 {
-				nvidia,pins = "pi7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pj0 {
-				nvidia,pins = "pj0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pj2 {
-				nvidia,pins = "pj2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pj7 {
-				nvidia,pins = "pj7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pk0 {
-				nvidia,pins = "pk0";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pk1 {
-				nvidia,pins = "pk1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pk2 {
-				nvidia,pins = "pk2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pk3 {
-				nvidia,pins = "pk3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pk4 {
-				nvidia,pins = "pk4";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			spdif_out_pk5 {
-				nvidia,pins = "spdif_out_pk5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			spdif_in_pk6 {
-				nvidia,pins = "spdif_in_pk6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pk7 {
-				nvidia,pins = "pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_fs_pn0 {
-				nvidia,pins = "dap1_fs_pn0";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2";
-				nvidia,function = "sata";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_sclk_pn3 {
-				nvidia,pins = "dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en1_pn5 {
-				nvidia,pins = "usb_vbus_en1_pn5";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_data7_po0 {
-				nvidia,pins = "ulpi_data7_po0";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data0_po1 {
-				nvidia,pins = "ulpi_data0_po1";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data1_po2 {
-				nvidia,pins = "ulpi_data1_po2";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data2_po3 {
-				nvidia,pins = "ulpi_data2_po3";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data3_po4 {
-				nvidia,pins = "ulpi_data3_po4";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data4_po5 {
-				nvidia,pins = "ulpi_data4_po5";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data5_po6 {
-				nvidia,pins = "ulpi_data5_po6";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_data6_po7 {
-				nvidia,pins = "ulpi_data6_po7";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_fs_pp0 {
-				nvidia,pins = "dap3_fs_pp0";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_din_pp1 {
-				nvidia,pins = "dap3_din_pp1";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_dout_pp2 {
-				nvidia,pins = "dap3_dout_pp2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_sclk_pp3 {
-				nvidia,pins = "dap3_sclk_pp3";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap4_fs_pp4 {
-				nvidia,pins = "dap4_fs_pp4";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_dout_pp6 {
-				nvidia,pins = "dap4_dout_pp6";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_sclk_pp7 {
-				nvidia,pins = "dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col0_pq0 {
-				nvidia,pins = "kb_col0_pq0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col1_pq1 {
-				nvidia,pins = "kb_col1_pq1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col2_pq2 {
-				nvidia,pins = "kb_col2_pq2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col3_pq3 {
-				nvidia,pins = "kb_col3_pq3";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col4_pq4 {
-				nvidia,pins = "kb_col4_pq4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col5_pq5 {
-				nvidia,pins = "kb_col5_pq5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col6_pq6 {
-				nvidia,pins = "kb_col6_pq6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col7_pq7 {
-				nvidia,pins = "kb_col7_pq7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row0_pr0 {
-				nvidia,pins = "kb_row0_pr0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row1_pr1 {
-				nvidia,pins = "kb_row1_pr1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row2_pr2 {
-				nvidia,pins = "kb_row2_pr2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row3_pr3 {
-				nvidia,pins = "kb_row3_pr3";
-				nvidia,function = "sys";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row4_pr4 {
-				nvidia,pins = "kb_row4_pr4";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row5_pr5 {
-				nvidia,pins = "kb_row5_pr5";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row6_pr6 {
-				nvidia,pins = "kb_row6_pr6";
-				nvidia,function = "displaya_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row7_pr7 {
-				nvidia,pins = "kb_row7_pr7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row8_ps0 {
-				nvidia,pins = "kb_row8_ps0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row11_ps3 {
-				nvidia,pins = "kb_row11_ps3";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row12_ps4 {
-				nvidia,pins = "kb_row12_ps4";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row13_ps5 {
-				nvidia,pins = "kb_row13_ps5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row14_ps6 {
-				nvidia,pins = "kb_row14_ps6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row15_ps7 {
-				nvidia,pins = "kb_row15_ps7";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row16_pt0 {
-				nvidia,pins = "kb_row16_pt0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row17_pt1 {
-				nvidia,pins = "kb_row17_pt1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gen2_i2c_sda_pt6 {
-				nvidia,pins = "gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu0 {
-				nvidia,pins = "pu0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu1 {
-				nvidia,pins = "pu1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu2 {
-				nvidia,pins = "pu2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu3 {
-				nvidia,pins = "pu3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu4 {
-				nvidia,pins = "pu4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu5 {
-				nvidia,pins = "pu5";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu6 {
-				nvidia,pins = "pu6";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_cd_n_pv2 {
-				nvidia,pins = "sdmmc3_cd_n_pv2";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_wp_n_pv3 {
-				nvidia,pins = "sdmmc1_wp_n_pv3";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_sda_pv5 {
-				nvidia,pins = "ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_w2_aud_pw2 {
-				nvidia,pins = "gpio_w2_aud_pw2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w3_aud_pw3 {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap_mclk1_pw4 {
-				nvidia,pins = "dap_mclk1_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk2_out_pw5 {
-				nvidia,pins = "clk2_out_pw5";
-				nvidia,function = "extperiph2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_txd_pw6 {
-				nvidia,pins = "uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_rxd_pw7 {
-				nvidia,pins = "uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x1_aud_px1 {
-				nvidia,pins = "gpio_x1_aud_px1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dvfs_clk_px2 {
-				nvidia,pins = "dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x3_aud_px3 {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x4_aud_px4 {
-				nvidia,pins = "gpio_x4_aud_px4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x5_aud_px5 {
-				nvidia,pins = "gpio_x5_aud_px5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x6_aud_px6 {
-				nvidia,pins = "gpio_x6_aud_px6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x7_aud_px7 {
-				nvidia,pins = "gpio_x7_aud_px7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_nxt_py2 {
-				nvidia,pins = "ulpi_nxt_py2";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_stp_py3 {
-				nvidia,pins = "ulpi_stp_py3";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_dat3_py4 {
-				nvidia,pins = "sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_dat2_py5 {
-				nvidia,pins = "sdmmc1_dat2_py5";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_dat1_py6 {
-				nvidia,pins = "sdmmc1_dat1_py6";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_dat0_py7 {
-				nvidia,pins = "sdmmc1_dat0_py7";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pwr_i2c_sda_pz7 {
-				nvidia,pins = "pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins = "sdmmc4_dat0_paa0";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat1_paa1 {
-				nvidia,pins = "sdmmc4_dat1_paa1";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat2_paa2 {
-				nvidia,pins = "sdmmc4_dat2_paa2";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat3_paa3 {
-				nvidia,pins = "sdmmc4_dat3_paa3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat4_paa4 {
-				nvidia,pins = "sdmmc4_dat4_paa4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat5_paa5 {
-				nvidia,pins = "sdmmc4_dat5_paa5";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat6_paa6 {
-				nvidia,pins = "sdmmc4_dat6_paa6";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat7_paa7 {
-				nvidia,pins = "sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pbb0 {
-				nvidia,pins = "pbb0";
-				nvidia,function = "vimclk2_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			cam_i2c_sda_pbb2 {
-				nvidia,pins = "cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pbb3 {
-				nvidia,pins = "pbb3";
-				nvidia,function = "vgp3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb4 {
-				nvidia,pins = "pbb4";
-				nvidia,function = "vgp4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb5 {
-				nvidia,pins = "pbb5";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb6 {
-				nvidia,pins = "pbb6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb7 {
-				nvidia,pins = "pbb7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_mclk_pcc0 {
-				nvidia,pins = "cam_mclk_pcc0";
-				nvidia,function = "vi_alt3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pcc1 {
-				nvidia,pins = "pcc1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pcc2 {
-				nvidia,pins = "pcc2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_req_pee1 {
-				nvidia,pins = "clk3_req_pee1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap_mclk1_req_pee2 {
-				nvidia,pins = "dap_mclk1_req_pee2";
-				nvidia,function = "sata";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_lb_out_pee4 {
-				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_lb_in_pee5 {
-				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dp_hpd_pff0 {
-				nvidia,pins = "dp_hpd_pff0";
-				nvidia,function = "dp";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en2_pff1 {
-				nvidia,pins = "usb_vbus_en2_pff1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			pff2 {
-				nvidia,pins = "pff2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			clk_32k_in {
-				nvidia,pins = "clk_32k_in";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			jtag_rtck {
-				nvidia,pins = "jtag_rtck";
-				nvidia,function = "rtck";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	/* DB9 serial port */
-	serial@0,70006300 {
-		status = "okay";
-	};
-
-	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-	i2c@0,7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		rt5639: audio-codec@1c {
-			compatible = "realtek,rt5639";
-			reg = <0x1c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
-			realtek,ldo1-en-gpios =
-				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		temperature-sensor@4c {
-			compatible = "ti,tmp451";
-			reg = <0x4c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		eeprom@56 {
-			compatible = "atmel,24c02";
-			reg = <0x56>;
-			pagesize = <8>;
-		};
-	};
-
-	/* Expansion GEN2_I2C_* */
-	i2c@0,7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	/* Expansion CAM_I2C_* */
-	i2c@0,7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	/* HDMI DDC */
-	hdmi_ddc: i2c@0,7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	/* Expansion PWR_I2C_*, on-board components */
-	i2c@0,7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@40 {
-			compatible = "ams,as3722";
-			reg = <0x40>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ams,system-power-controller;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&as3722_default>;
-
-			as3722_default: pinmux {
-				gpio0 {
-					pins = "gpio0";
-					function = "gpio";
-					bias-pull-down;
-				};
-
-				gpio1_2_4_7 {
-					pins = "gpio1", "gpio2", "gpio4", "gpio7";
-					function = "gpio";
-					bias-pull-up;
-				};
-
-				gpio3_5_6 {
-					pins = "gpio3", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
-			};
-
-			regulators {
-				vsup-sd2-supply = <&vdd_5v0_sys>;
-				vsup-sd3-supply = <&vdd_5v0_sys>;
-				vsup-sd4-supply = <&vdd_5v0_sys>;
-				vsup-sd5-supply = <&vdd_5v0_sys>;
-				vin-ldo0-supply = <&vdd_1v35_lp0>;
-				vin-ldo1-6-supply = <&vdd_3v3_run>;
-				vin-ldo2-5-7-supply = <&vddio_1v8>;
-				vin-ldo3-4-supply = <&vdd_3v3_sys>;
-				vin-ldo9-10-supply = <&vdd_5v0_sys>;
-				vin-ldo11-supply = <&vdd_3v3_run>;
-
-				sd0 {
-					regulator-name = "+VDD_CPU_AP";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <2>;
-				};
-
-				sd1 {
-					regulator-name = "+VDD_CORE";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-min-microamp = <2500000>;
-					regulator-max-microamp = <2500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <1>;
-				};
-
-				vdd_1v35_lp0: sd2 {
-					regulator-name = "+1.35V_LP0(sd2)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				sd3 {
-					regulator-name = "+1.35V_LP0(sd3)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v05_run: sd4 {
-					regulator-name = "+1.05V_RUN";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				vddio_1v8: sd5 {
-					regulator-name = "+1.8V_VDDIO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				sd6 {
-					regulator-name = "+VDD_GPU_AP";
-					regulator-min-microvolt = <650000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo0 {
-					regulator-name = "+1.05V_RUN_AVDD";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,ext-control = <1>;
-				};
-
-				ldo1 {
-					regulator-name = "+1.8V_RUN_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2 {
-					regulator-name = "+1.2V_GEN_AVDD";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo3 {
-					regulator-name = "+1.05V_LP0_VDD_RTC";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,enable-tracking;
-				};
-
-				ldo4 {
-					regulator-name = "+2.8V_RUN_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5 {
-					regulator-name = "+1.2V_RUN_CAM_FRONT";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				vddio_sdmmc3: ldo6 {
-					regulator-name = "+VDDIO_SDMMC3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo7 {
-					regulator-name = "+1.05V_RUN_CAM_REAR";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo9 {
-					regulator-name = "+3.3V_RUN_TOUCH";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10 {
-					regulator-name = "+2.8V_RUN_CAM_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo11 {
-					regulator-name = "+1.8V_RUN_VPP_FUSE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-			};
-		};
-	};
-
-	/* Expansion TS_SPI_* */
-	spi@0,7000d400 {
-		status = "okay";
-	};
-
-	/* Internal SPI */
-	spi@0,7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q32dw";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@0,7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <500>;
-		nvidia,cpu-pwr-off-time = <300>;
-		nvidia,core-pwr-good-time = <641 3845>;
-		nvidia,core-pwr-off-time = <61036>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	padctl@0,7009f000 {
-		pinctrl-0 = <&padctl_default>;
-		pinctrl-names = "default";
-
-		padctl_default: pinmux {
-			usb3 {
-				nvidia,lanes = "pcie-0", "pcie-1";
-				nvidia,function = "usb3";
-				nvidia,iddq = <0>;
-			};
-
-			pcie {
-				nvidia,lanes = "pcie-2", "pcie-3",
-					       "pcie-4";
-				nvidia,function = "pcie";
-				nvidia,iddq = <0>;
-			};
-
-			sata {
-				nvidia,lanes = "sata-0";
-				nvidia,function = "sata";
-				nvidia,iddq = <0>;
-			};
-		};
-	};
-
-	/* SD card */
-	sdhci@0,700b0400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		vqmmc-supply = <&vddio_sdmmc3>;
-	};
-
-	/* eMMC */
-	sdhci@0,700b0600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	ahub@0,70300000 {
-		i2s@0,70301100 {
-			status = "okay";
-		};
-	};
-
-	/* mini-PCIe USB */
-	usb@0,7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d004000 {
-		status = "okay";
-	};
-
-	/* USB A connector */
-	usb@0,7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb3_vbus>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
-
-		vdd_usb1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+USB0_VBUS_SW";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb3_vbus: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_3v3_lp0: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+3.3V_LP0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_hdmi_pll: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
-
-		vdd_5v0_hdmi: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
-			     "nvidia,tegra-audio-rt5640";
-		nvidia,model = "NVIDIA Tegra Jetson TK1";
-
-		nvidia,audio-routing =
-			"Headphones", "HPOR",
-			"Headphones", "HPOL",
-			"Mic Jack", "MICBIAS1",
-			"IN2P", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5639>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-
-		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra124-venice2.dts b/src/arm/tegra124-venice2.dts
deleted file mode 100644
index 70ad91d1a20b..000000000000
--- a/src/arm/tegra124-venice2.dts
+++ /dev/null
@@ -1,1147 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra124.dtsi"
-
-/ {
-	model = "NVIDIA Tegra124 Venice2";
-	compatible = "nvidia,venice2", "nvidia,tegra124";
-
-	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
-	};
-
-	memory {
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
-			status = "okay";
-
-			vdd-supply = <&vdd_3v3_hdmi>;
-			pll-supply = <&vdd_hdmi_pll>;
-			hdmi-supply = <&vdd_5v0_hdmi>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-
-		sor@0,54540000 {
-			status = "okay";
-
-			nvidia,dpaux = <&dpaux>;
-			nvidia,panel = <&panel>;
-		};
-
-		dpaux: dpaux@0,545c0000 {
-			vdd-supply = <&vdd_3v3_panel>;
-			status = "okay";
-		};
-	};
-
-	pinmux: pinmux@0,70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_default>;
-
-		pinmux_default: common {
-			dap_mclk1_pw4 {
-				nvidia,pins = "dap_mclk1_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2",
-					      "dap1_fs_pn0",
-					      "dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5",
-					      "dap2_fs_pa2",
-					      "dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0",
-					      "dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0",
-					      "ulpi_nxt_py2",
-					      "ulpi_stp_py3";
-				nvidia,function = "spi1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1";
-				nvidia,function = "spi1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-					      "cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5",
-					      "gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pg4 {
-				nvidia,pins = "pg4",
-					      "pg5",
-					      "pg6",
-					      "pi3";
-				nvidia,function = "spi4";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pg7 {
-				nvidia,pins = "pg7";
-				nvidia,function = "spi4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ph1 {
-				nvidia,pins = "ph1";
-				nvidia,function = "pwm1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pk0 {
-				nvidia,pins = "pk0",
-					      "kb_row15_ps7",
-					      "clk_32k_out_pa0";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1",
-					      "sdmmc1_dat0_py7",
-					      "sdmmc1_dat1_py6",
-					      "sdmmc1_dat2_py5",
-					      "sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7",
-					      "sdmmc3_dat0_pb7",
-					      "sdmmc3_dat1_pb6",
-					      "sdmmc3_dat2_pb5",
-					      "sdmmc3_dat3_pb4",
-					      "sdmmc3_clk_lb_out_pee4",
-					      "sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7",
-					      "sdmmc4_dat0_paa0",
-					      "sdmmc4_dat1_paa1",
-					      "sdmmc4_dat2_paa2",
-					      "sdmmc4_dat3_paa3",
-					      "sdmmc4_dat4_paa4",
-					      "sdmmc4_dat5_paa5",
-					      "sdmmc4_dat6_paa6",
-					      "sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-					      "pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			jtag_rtck {
-				nvidia,pins = "jtag_rtck";
-				nvidia,function = "rtck";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			clk_32k_in {
-				nvidia,pins = "clk_32k_in";
-				nvidia,function = "clk";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "cpu";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5";
-				nvidia,function = "i2s3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_dout_pp6 {
-				nvidia,pins = "dap4_dout_pp6",
-					      "dap4_fs_pp4",
-					      "dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			gen1_i2c_sda_pc5 {
-				nvidia,pins = "gen1_i2c_sda_pc5",
-					      "gen1_i2c_scl_pc4";
-				nvidia,function = "i2c1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1",
-					      "uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0",
-					      "uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4",
-					      "ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
-			};
-			pj7 {
-				nvidia,pins = "pj7",
-					      "pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pb0 {
-				nvidia,pins = "pb0",
-					      "pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph0 {
-				nvidia,pins = "ph0";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row6_pr6 {
-				nvidia,pins = "kb_row6_pr6";
-				nvidia,function = "displaya_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4",
-					      "usb_vbus_en1_pn5";
-				nvidia,function = "usb";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <32>;
-				nvidia,pull-up-strength = <42>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <20>;
-				nvidia,pull-up-strength = <36>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_gma {
-				nvidia,pins = "drive_gma";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <1>;
-				nvidia,pull-up-strength = <2>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,drive-type = <1>;
-			};
-			als_irq_l {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			codec_irq_l {
-				nvidia,pins = "ph4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			lcd_bl_en {
-				nvidia,pins = "ph2";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			touch_irq_l {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			tpm_davint_l {
-				nvidia,pins = "ph6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ts_irq_l {
-				nvidia,pins = "pk2";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ts_reset_l {
-				nvidia,pins = "pk4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ts_shdn_l {
-				nvidia,pins = "pk1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph7 {
-				nvidia,pins = "ph7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col0_ap {
-				nvidia,pins = "kb_col0_pq0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			lid_open {
-				nvidia,pins = "kb_row4_pr4";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			en_vdd_sd {
-				nvidia,pins = "kb_row0_pr0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ac_ok {
-				nvidia,pins = "pj0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sensor_irq_l {
-				nvidia,pins = "pi6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			wifi_en {
-				nvidia,pins = "gpio_x7_aud_px7";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			wifi_rst_l {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "dap";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hp_det_l {
-				nvidia,pins = "ulpi_data1_po2";
-				nvidia,function = "spi3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	serial@0,70006000 {
-		status = "okay";
-	};
-
-	pwm: pwm@0,7000a000 {
-		status = "okay";
-	};
-
-	i2c@0,7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		acodec: audio-codec@10 {
-			compatible = "maxim,max98090";
-			reg = <0x10>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c@0,7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@0,7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	hdmi_ddc: i2c@0,7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@0,7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@40 {
-			compatible = "ams,as3722";
-			reg = <0x40>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ams,system-power-controller;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&as3722_default>;
-
-			as3722_default: pinmux {
-				gpio0 {
-					pins = "gpio0";
-					function = "gpio";
-					bias-pull-down;
-				};
-
-				gpio1_2_4_7 {
-					pins = "gpio1", "gpio2", "gpio4", "gpio7";
-					function = "gpio";
-					bias-pull-up;
-				};
-
-				gpio3_6 {
-					pins = "gpio3", "gpio6";
-					bias-high-impedance;
-				};
-
-				gpio5 {
-					pins = "gpio5";
-					function = "clk32k-out";
-				};
-			};
-
-			regulators {
-				vsup-sd2-supply = <&vdd_5v0_sys>;
-				vsup-sd3-supply = <&vdd_5v0_sys>;
-				vsup-sd4-supply = <&vdd_5v0_sys>;
-				vsup-sd5-supply = <&vdd_5v0_sys>;
-				vin-ldo0-supply = <&vdd_1v35_lp0>;
-				vin-ldo1-6-supply = <&vdd_3v3_run>;
-				vin-ldo2-5-7-supply = <&vddio_1v8>;
-				vin-ldo3-4-supply = <&vdd_3v3_sys>;
-				vin-ldo9-10-supply = <&vdd_5v0_sys>;
-				vin-ldo11-supply = <&vdd_3v3_run>;
-
-				sd0 {
-					regulator-name = "+VDD_CPU_AP";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <2>;
-				};
-
-				sd1 {
-					regulator-name = "+VDD_CORE";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-min-microamp = <2500000>;
-					regulator-max-microamp = <2500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <1>;
-				};
-
-				vdd_1v35_lp0: sd2 {
-					regulator-name = "+1.35V_LP0(sd2)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				sd3 {
-					regulator-name = "+1.35V_LP0(sd3)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v05_run: sd4 {
-					regulator-name = "+1.05V_RUN";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				vddio_1v8: sd5 {
-					regulator-name = "+1.8V_VDDIO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				sd6 {
-					regulator-name = "+VDD_GPU_AP";
-					regulator-min-microvolt = <650000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo0 {
-					regulator-name = "+1.05V_RUN_AVDD";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,ext-control = <1>;
-				};
-
-				ldo1 {
-					regulator-name = "+1.8V_RUN_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2 {
-					regulator-name = "+1.2V_GEN_AVDD";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo3 {
-					regulator-name = "+1.00V_LP0_VDD_RTC";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,enable-tracking;
-				};
-
-				vdd_run_cam: ldo4 {
-					regulator-name = "+3.3V_RUN_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5 {
-					regulator-name = "+1.2V_RUN_CAM_FRONT";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				vddio_sdmmc3: ldo6 {
-					regulator-name = "+VDDIO_SDMMC3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo7 {
-					regulator-name = "+1.05V_RUN_CAM_REAR";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo9 {
-					regulator-name = "+2.8V_RUN_TOUCH";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10 {
-					regulator-name = "+2.8V_RUN_CAM_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo11 {
-					regulator-name = "+1.8V_RUN_VPP_FUSE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-			};
-		};
-	};
-
-	spi@0,7000d400 {
-		status = "okay";
-
-		cros_ec: cros-ec@0 {
-			compatible = "google,cros-ec-spi";
-			spi-max-frequency = <4000000>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
-			reg = <0>;
-
-			google,cros-ec-spi-msg-delay = <2000>;
-
-			i2c-tunnel {
-				compatible = "google,cros-ec-i2c-tunnel";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				google,remote-bus = <0>;
-
-				charger: bq24735@9 {
-					compatible = "ti,bq24735";
-					reg = <0x9>;
-					interrupt-parent = <&gpio>;
-					interrupts = <TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
-					ti,ac-detect-gpios = <&gpio
-							TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
-				};
-
-				battery: sbs-battery@b {
-					compatible = "sbs,sbs-battery";
-					reg = <0xb>;
-					sbs,i2c-retry-count = <2>;
-					sbs,poll-retry-count = <1>;
-				};
-			};
-		};
-	};
-
-	spi@0,7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q32dw";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@0,7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <500>;
-		nvidia,cpu-pwr-off-time = <300>;
-		nvidia,core-pwr-good-time = <641 3845>;
-		nvidia,core-pwr-off-time = <61036>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	hda@0,70030000 {
-		status = "okay";
-	};
-
-	sdhci@0,700b0400 {
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-		status = "okay";
-		bus-width = <4>;
-		vqmmc-supply = <&vddio_sdmmc3>;
-	};
-
-	sdhci@0,700b0600 {
-		status = "okay";
-		bus-width = <8>;
-	};
-
-	ahub@0,70300000 {
-		i2s@0,70301100 {
-			status = "okay";
-		};
-	};
-
-	usb@0,7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d000000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb1_vbus>;
-	};
-
-	usb@0,7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d004000 {
-		status = "okay";
-		vbus-supply = <&vdd_run_cam>;
-	};
-
-	usb@0,7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb3_vbus>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_led>;
-		pwms = <&pwm 1 1000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "lg,lp129qe", "simple-panel";
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
-
-		vdd_led: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "+VDD_LED";
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_5v0_ts: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "+5V_VDD_TS_SW";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb3_vbus: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+5V_USB_SS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_3v3_panel: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "+3.3V_PANEL";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_run>;
-		};
-
-		vdd_3v3_lp0: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+3.3V_LP0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			/*
-			 * TODO: find a way to wire this up with the USB EHCI
-			 * controllers so that it can be enabled on demand.
-			 */
-			regulator-always-on;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_hdmi_pll: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
-
-		vdd_5v0_hdmi: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-venice2",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "NVIDIA Tegra Venice2";
-
-		nvidia,audio-routing =
-			"Headphones", "HPR",
-			"Headphones", "HPL",
-			"Speakers", "SPKR",
-			"Speakers", "SPKL",
-			"Mic Jack", "MICBIAS",
-			"IN34", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&acodec>;
-
-		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/tegra124.dtsi b/src/arm/tegra124.dtsi
deleted file mode 100644
index 03916efd6fa9..000000000000
--- a/src/arm/tegra124.dtsi
+++ /dev/null
@@ -1,799 +0,0 @@
-#include <dt-bindings/clock/tegra124-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra124";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	host1x@0,50000000 {
-		compatible = "nvidia,tegra124-host1x", "simple-bus";
-		reg = <0x0 0x50000000 0x0 0x00034000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
-
-		dc@0,54200000 {
-			compatible = "nvidia,tegra124-dc";
-			reg = <0x0 0x54200000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-		};
-
-		dc@0,54240000 {
-			compatible = "nvidia,tegra124-dc";
-			reg = <0x0 0x54240000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-		};
-
-		hdmi@0,54280000 {
-			compatible = "nvidia,tegra124-hdmi";
-			reg = <0x0 0x54280000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
-				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		sor@0,54540000 {
-			compatible = "nvidia,tegra124-sor";
-			reg = <0x0 0x54540000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
-				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
-				 <&tegra_car TEGRA124_CLK_PLL_DP>,
-				 <&tegra_car TEGRA124_CLK_CLK_M>;
-			clock-names = "sor", "parent", "dp", "safe";
-			resets = <&tegra_car 182>;
-			reset-names = "sor";
-			status = "disabled";
-		};
-
-		dpaux@0,545c0000 {
-			compatible = "nvidia,tegra124-dpaux";
-			reg = <0x0 0x545c0000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
-				 <&tegra_car TEGRA124_CLK_PLL_DP>;
-			clock-names = "dpaux", "parent";
-			resets = <&tegra_car 181>;
-			reset-names = "dpaux";
-			status = "disabled";
-		};
-	};
-
-	gic: interrupt-controller@0,50041000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x50041000 0x0 0x1000>,
-		      <0x0 0x50042000 0x0 0x1000>,
-		      <0x0 0x50044000 0x0 0x2000>,
-		      <0x0 0x50046000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	gpu@0,57000000 {
-		compatible = "nvidia,gk20a";
-		reg = <0x0 0x57000000 0x0 0x01000000>,
-		      <0x0 0x58000000 0x0 0x01000000>;
-		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "stall", "nonstall";
-		clocks = <&tegra_car TEGRA124_CLK_GPU>,
-			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
-		clock-names = "gpu", "pwr";
-		resets = <&tegra_car 184>;
-		reset-names = "gpu";
-		status = "disabled";
-	};
-
-	timer@0,60005000 {
-		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
-		reg = <0x0 0x60005000 0x0 0x400>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
-	};
-
-	tegra_car: clock@0,60006000 {
-		compatible = "nvidia,tegra124-car";
-		reg = <0x0 0x60006000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	gpio: gpio@0,6000d000 {
-		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
-		reg = <0x0 0x6000d000 0x0 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbdma: dma@0,60020000 {
-		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
-		reg = <0x0 0x60020000 0x0 0x1400>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	apbmisc@0,70000800 {
-		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
-		      <0x0 0x7000E864 0x0 0x04>;   /* Strapping options */
-	};
-
-	pinmux: pinmux@0,70000868 {
-		compatible = "nvidia,tegra124-pinmux";
-		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
-		      <0x0 0x70003000 0x0 0x434>; /* Mux registers */
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
-	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
-	 */
-	serial@0,70006000 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006000 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial@0,70006040 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006040 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial@0,70006200 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006200 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial@0,70006300 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006300 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm@0,7000a000 {
-		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
-		reg = <0x0 0x7000a000 0x0 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA124_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	i2c@0,7000c000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c000 0x0 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000c400 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c400 0x0 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000c500 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c500 0x0 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000c700 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c700 0x0 0x100>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 103>;
-		reset-names = "i2c";
-		dmas = <&apbdma 26>, <&apbdma 26>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000d000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000d000 0x0 0x100>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000d100 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000d100 0x0 0x100>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 166>;
-		reset-names = "i2c";
-		dmas = <&apbdma 30>, <&apbdma 30>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000d400 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000d400 0x0 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
-		clock-names = "spi";
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000d600 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000d600 0x0 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
-		clock-names = "spi";
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000d800 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000d800 0x0 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
-		clock-names = "spi";
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000da00 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000da00 0x0 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
-		clock-names = "spi";
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000dc00 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000dc00 0x0 0x200>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
-		clock-names = "spi";
-		resets = <&tegra_car 104>;
-		reset-names = "spi";
-		dmas = <&apbdma 27>, <&apbdma 27>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000de00 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000de00 0x0 0x200>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
-		clock-names = "spi";
-		resets = <&tegra_car 105>;
-		reset-names = "spi";
-		dmas = <&apbdma 28>, <&apbdma 28>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	rtc@0,7000e000 {
-		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
-		reg = <0x0 0x7000e000 0x0 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_RTC>;
-	};
-
-	pmc@0,7000e400 {
-		compatible = "nvidia,tegra124-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	fuse@0,7000f800 {
-		compatible = "nvidia,tegra124-efuse";
-		reg = <0x0 0x7000f800 0x0 0x400>;
-		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	hda@0,70030000 {
-		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
-		reg = <0x0 0x70030000 0x0 0x10000>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_HDA>,
-		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
-			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
-		clock-names = "hda", "hda2hdmi", "hdacodec_2x";
-		resets = <&tegra_car 125>, /* hda */
-			 <&tegra_car 128>, /* hda2hdmi */
-			 <&tegra_car 111>; /* hda2codec_2x */
-		reset-names = "hda", "hda2hdmi", "hdacodec_2x";
-		status = "disabled";
-	};
-
-	padctl: padctl@0,7009f000 {
-		compatible = "nvidia,tegra124-xusb-padctl";
-		reg = <0x0 0x7009f000 0x0 0x1000>;
-		resets = <&tegra_car 142>;
-		reset-names = "padctl";
-
-		#phy-cells = <1>;
-	};
-
-	sdhci@0,700b0000 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0000 0x0 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@0,700b0200 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0200 0x0 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@0,700b0400 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0400 0x0 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@0,700b0600 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0600 0x0 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	ahub@0,70300000 {
-		compatible = "nvidia,tegra124-ahub";
-		reg = <0x0 0x70300000 0x0 0x200>,
-		      <0x0 0x70300800 0x0 0x800>,
-		      <0x0 0x70300200 0x0 0x600>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
-			 <&tegra_car TEGRA124_CLK_APBIF>;
-		clock-names = "d_audio", "apbif";
-		resets = <&tegra_car 106>, /* d_audio */
-			 <&tegra_car 107>, /* apbif */
-			 <&tegra_car 30>,  /* i2s0 */
-			 <&tegra_car 11>,  /* i2s1 */
-			 <&tegra_car 18>,  /* i2s2 */
-			 <&tegra_car 101>, /* i2s3 */
-			 <&tegra_car 102>, /* i2s4 */
-			 <&tegra_car 108>, /* dam0 */
-			 <&tegra_car 109>, /* dam1 */
-			 <&tegra_car 110>, /* dam2 */
-			 <&tegra_car 10>,  /* spdif */
-			 <&tegra_car 153>, /* amx */
-			 <&tegra_car 185>, /* amx1 */
-			 <&tegra_car 154>, /* adx */
-			 <&tegra_car 180>, /* adx1 */
-			 <&tegra_car 186>, /* afc0 */
-			 <&tegra_car 187>, /* afc1 */
-			 <&tegra_car 188>, /* afc2 */
-			 <&tegra_car 189>, /* afc3 */
-			 <&tegra_car 190>, /* afc4 */
-			 <&tegra_car 191>; /* afc5 */
-		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
-			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
-			      "spdif", "amx", "amx1", "adx", "adx1",
-			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
-		dmas = <&apbdma 1>, <&apbdma 1>,
-		       <&apbdma 2>, <&apbdma 2>,
-		       <&apbdma 3>, <&apbdma 3>,
-		       <&apbdma 4>, <&apbdma 4>,
-		       <&apbdma 6>, <&apbdma 6>,
-		       <&apbdma 7>, <&apbdma 7>,
-		       <&apbdma 12>, <&apbdma 12>,
-		       <&apbdma 13>, <&apbdma 13>,
-		       <&apbdma 14>, <&apbdma 14>,
-		       <&apbdma 29>, <&apbdma 29>;
-		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
-			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
-			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
-			    "rx9", "tx9";
-		ranges;
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		tegra_i2s0: i2s@0,70301000 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301000 0x0 0x100>;
-			nvidia,ahub-cif-ids = <4 4>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
-			resets = <&tegra_car 30>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s1: i2s@0,70301100 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301100 0x0 0x100>;
-			nvidia,ahub-cif-ids = <5 5>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
-			resets = <&tegra_car 11>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s2: i2s@0,70301200 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301200 0x0 0x100>;
-			nvidia,ahub-cif-ids = <6 6>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
-			resets = <&tegra_car 18>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s3: i2s@0,70301300 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301300 0x0 0x100>;
-			nvidia,ahub-cif-ids = <7 7>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
-			resets = <&tegra_car 101>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s4: i2s@0,70301400 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301400 0x0 0x100>;
-			nvidia,ahub-cif-ids = <8 8>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
-			resets = <&tegra_car 102>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-	};
-
-	usb@0,7d000000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x0 0x7d000000 0x0 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@0,7d000000 {
-		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x0 0x7d000000 0x0 0x4000>,
-		      <0x0 0x7d000000 0x0 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USBD>,
-			 <&tegra_car TEGRA124_CLK_PLL_U>,
-			 <&tegra_car TEGRA124_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		status = "disabled";
-	};
-
-	usb@0,7d004000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x0 0x7d004000 0x0 0x4000>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB2>;
-		resets = <&tegra_car 58>;
-		reset-names = "usb";
-		nvidia,phy = <&phy2>;
-		status = "disabled";
-	};
-
-	phy2: usb-phy@0,7d004000 {
-		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x0 0x7d004000 0x0 0x4000>,
-		      <0x0 0x7d000000 0x0 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB2>,
-			 <&tegra_car TEGRA124_CLK_PLL_U>,
-			 <&tegra_car TEGRA124_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@0,7d008000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x0 0x7d008000 0x0 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@0,7d008000 {
-		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x0 0x7d008000 0x0 0x4000>,
-		      <0x0 0x7d000000 0x0 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB3>,
-			 <&tegra_car TEGRA124_CLK_PLL_U>,
-			 <&tegra_car TEGRA124_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/src/arm/tegra20-colibri-512.dtsi b/src/arm/tegra20-colibri-512.dtsi
deleted file mode 100644
index 8e0066ad9628..000000000000
--- a/src/arm/tegra20-colibri-512.dtsi
+++ /dev/null
@@ -1,533 +0,0 @@
-#include "tegra20.dtsi"
-
-/ {
-	model = "Toradex Colibri T20 512MB";
-	compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&i2c_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			audio_refclk {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			crt {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			displaya {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
-					"ld4", "ld5", "ld6", "ld7", "ld8",
-					"ld9", "ld10", "ld11", "ld12", "ld13",
-					"ld14", "ld15", "ld16", "ld17",
-					"lhs", "lpw0", "lpw2", "lsc0",
-					"lsc1", "lsck", "lsda", "lspi", "lvs";
-				nvidia,function = "displaya";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_dte {
-				nvidia,pins = "dte";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_gmi {
-				nvidia,pins = "ata", "atc", "atd", "ate",
-					"dap1", "dap2", "dap4", "gpu", "irrx",
-					"irtx", "spia", "spib", "spic";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_uac {
-				nvidia,pins = "uac";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2c1 {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2c3 {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2cddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			irda {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			nand {
-				nvidia,pins = "kbca", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "nand";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			owc {
-				nvidia,pins = "owc";
-				nvidia,function = "owr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pwm {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			sdio4 {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			spi1 {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			spi4 {
-				nvidia,pins = "slxa", "slxc", "slxd", "slxk";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			uarta {
-				nvidia,pins = "sdio1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			uartd {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_refclk {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			usb_gpio {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			vi {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,function = "vi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			vi_sc {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	ac97: ac97@70002000 {
-		status = "okay";
-		nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
-			GPIO_ACTIVE_HIGH>;
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-	};
-
-	i2c_ddc: i2c@7000c400 {
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_3v3_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&vdd_3v3_reg>;
-			vinldo4-supply = <&vdd_3v3_reg>;
-			vinldo678-supply = <&vdd_3v3_reg>;
-			vinldo9-supply = <&vdd_3v3_reg>;
-
-			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				/* LDO3 is not connected to anything */
-
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
-					regulator-name = "vdd_ldo5,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
-					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-
-				hdmi_vdd_reg: regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
-					regulator-name = "vdd_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "national,lm95245";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	memory-controller@7000f400 {
-		emc-table@83250 {
-			reg = <83250>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <83250>;
-			nvidia,emc-registers =   <0x00000005 0x00000011
-				0x00000004 0x00000002 0x00000004 0x00000004
-				0x00000001 0x0000000a 0x00000002 0x00000002
-				0x00000001 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x0000025f
-				0x00000000 0x00000003 0x00000003 0x00000002
-				0x00000002 0x00000001 0x00000008 0x000000c8
-				0x00000003 0x00000005 0x00000003 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x00520006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-		emc-table@133200 {
-			reg = <133200>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <133200>;
-			nvidia,emc-registers =   <0x00000008 0x00000019
-				0x00000006 0x00000002 0x00000004 0x00000004
-				0x00000001 0x0000000a 0x00000002 0x00000002
-				0x00000002 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x0000039f
-				0x00000000 0x00000003 0x00000003 0x00000002
-				0x00000002 0x00000001 0x00000008 0x000000c8
-				0x00000003 0x00000007 0x00000003 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x00510006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-		emc-table@166500 {
-			reg = <166500>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <166500>;
-			nvidia,emc-registers =   <0x0000000a 0x00000021
-				0x00000008 0x00000003 0x00000004 0x00000004
-				0x00000002 0x0000000a 0x00000003 0x00000003
-				0x00000002 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x000004df
-				0x00000000 0x00000003 0x00000003 0x00000003
-				0x00000003 0x00000001 0x00000009 0x000000c8
-				0x00000003 0x00000009 0x00000004 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x004f0006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-		emc-table@333000 {
-			reg = <333000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <333000>;
-			nvidia,emc-registers =   <0x00000014 0x00000041
-				0x0000000f 0x00000005 0x00000004 0x00000005
-				0x00000003 0x0000000a 0x00000005 0x00000005
-				0x00000004 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x000009ff
-				0x00000000 0x00000003 0x00000003 0x00000005
-				0x00000005 0x00000001 0x0000000e 0x000000c8
-				0x00000003 0x00000011 0x00000006 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x00380006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	sdhci@c8000600 {
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_3v3_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "internal_usb";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
-			         "nvidia,tegra-audio-wm9712";
-		nvidia,model = "Colibri T20 AC97 Audio";
-
-		nvidia,audio-routing =
-			"Headphone", "HPOUTL",
-			"Headphone", "HPOUTR",
-			"LineIn", "LINEINL",
-			"LineIn", "LINEINR",
-			"Mic", "MIC1";
-
-		nvidia,ac97-controller = <&ac97>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-harmony.dts b/src/arm/tegra20-harmony.dts
deleted file mode 100644
index a37279af687c..000000000000
--- a/src/arm/tegra20-harmony.dts
+++ /dev/null
@@ -1,776 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra20 Harmony evaluation board";
-	compatible = "nvidia,harmony", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
-					"spia", "spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtd";
-				nvidia,function = "sdio2";
-			};
-			dtb {
-				nvidia,pins = "dtb", "dtc", "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "pta";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uarta";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
-					"slxc", "slxd", "spdi", "spdo", "spig",
-					"uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "dta", "dtd", "kbca",
-					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "owc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "pmc";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				pci_clk_reg: ldo0 {
-					regulator-name = "vdd_ldo0,vddio_pex_clk";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	kbc@7000e200 {
-		status = "okay";
-		nvidia,debounce-delay-ms = <2>;
-		nvidia,repeat-delay-ms = <160>;
-		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
-		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
-				MATRIX_KEY(0x00, 0x03, KEY_S)
-				MATRIX_KEY(0x00, 0x04, KEY_A)
-				MATRIX_KEY(0x00, 0x05, KEY_Z)
-				MATRIX_KEY(0x00, 0x07, KEY_FN)
-				MATRIX_KEY(0x01, 0x07, KEY_MENU)
-				MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
-				MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
-				MATRIX_KEY(0x03, 0x00, KEY_5)
-				MATRIX_KEY(0x03, 0x01, KEY_4)
-				MATRIX_KEY(0x03, 0x02, KEY_R)
-				MATRIX_KEY(0x03, 0x03, KEY_E)
-				MATRIX_KEY(0x03, 0x04, KEY_F)
-				MATRIX_KEY(0x03, 0x05, KEY_D)
-				MATRIX_KEY(0x03, 0x06, KEY_X)
-				MATRIX_KEY(0x04, 0x00, KEY_7)
-				MATRIX_KEY(0x04, 0x01, KEY_6)
-				MATRIX_KEY(0x04, 0x02, KEY_T)
-				MATRIX_KEY(0x04, 0x03, KEY_H)
-				MATRIX_KEY(0x04, 0x04, KEY_G)
-				MATRIX_KEY(0x04, 0x05, KEY_V)
-				MATRIX_KEY(0x04, 0x06, KEY_C)
-				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
-				MATRIX_KEY(0x05, 0x00, KEY_9)
-				MATRIX_KEY(0x05, 0x01, KEY_8)
-				MATRIX_KEY(0x05, 0x02, KEY_U)
-				MATRIX_KEY(0x05, 0x03, KEY_Y)
-				MATRIX_KEY(0x05, 0x04, KEY_J)
-				MATRIX_KEY(0x05, 0x05, KEY_N)
-				MATRIX_KEY(0x05, 0x06, KEY_B)
-				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
-				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
-				MATRIX_KEY(0x06, 0x01, KEY_0)
-				MATRIX_KEY(0x06, 0x02, KEY_O)
-				MATRIX_KEY(0x06, 0x03, KEY_I)
-				MATRIX_KEY(0x06, 0x04, KEY_L)
-				MATRIX_KEY(0x06, 0x05, KEY_K)
-				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
-				MATRIX_KEY(0x06, 0x07, KEY_M)
-				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
-				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
-				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
-				MATRIX_KEY(0x07, 0x07, KEY_MENU)
-				MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
-				MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
-				MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
-				MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
-				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
-				MATRIX_KEY(0x0B, 0x01, KEY_P)
-				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
-				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
-				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
-				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
-				MATRIX_KEY(0x0C, 0x00, KEY_F10)
-				MATRIX_KEY(0x0C, 0x01, KEY_F9)
-				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
-				MATRIX_KEY(0x0C, 0x03, KEY_3)
-				MATRIX_KEY(0x0C, 0x04, KEY_2)
-				MATRIX_KEY(0x0C, 0x05, KEY_UP)
-				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
-				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
-				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
-				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
-				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
-				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
-				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
-				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
-				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
-				MATRIX_KEY(0x0E, 0x00, KEY_F11)
-				MATRIX_KEY(0x0E, 0x01, KEY_F12)
-				MATRIX_KEY(0x0E, 0x02, KEY_F8)
-				MATRIX_KEY(0x0E, 0x03, KEY_Q)
-				MATRIX_KEY(0x0E, 0x04, KEY_F4)
-				MATRIX_KEY(0x0E, 0x05, KEY_F3)
-				MATRIX_KEY(0x0E, 0x06, KEY_1)
-				MATRIX_KEY(0x0E, 0x07, KEY_F7)
-				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
-				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
-				MATRIX_KEY(0x0F, 0x02, KEY_F5)
-				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
-				MATRIX_KEY(0x0F, 0x04, KEY_F1)
-				MATRIX_KEY(0x0F, 0x05, KEY_F2)
-				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
-				MATRIX_KEY(0x0F, 0x07, KEY_F6)
-				MATRIX_KEY(0x14, 0x00, KEY_KP7)
-				MATRIX_KEY(0x15, 0x00, KEY_KP9)
-				MATRIX_KEY(0x15, 0x01, KEY_KP8)
-				MATRIX_KEY(0x15, 0x02, KEY_KP4)
-				MATRIX_KEY(0x15, 0x04, KEY_KP1)
-				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
-				MATRIX_KEY(0x16, 0x02, KEY_KP6)
-				MATRIX_KEY(0x16, 0x03, KEY_KP5)
-				MATRIX_KEY(0x16, 0x04, KEY_KP3)
-				MATRIX_KEY(0x16, 0x05, KEY_KP2)
-				MATRIX_KEY(0x16, 0x07, KEY_KP0)
-				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
-				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
-				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
-				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
-				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
-				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
-				MATRIX_KEY(0x1D, 0x04, KEY_END)
-				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
-				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
-				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
-				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
-				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
-				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
-				MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	pcie-controller@80003000 {
-		status = "okay";
-
-		avdd-pex-supply = <&pci_vdd_reg>;
-		vdd-pex-supply = <&pci_vdd_reg>;
-		avdd-pex-pll-supply = <&pci_vdd_reg>;
-		avdd-plle-supply = <&pci_vdd_reg>;
-		vddio-pex-clk-supply = <&pci_clk_reg>;
-
-		pci@1,0 {
-			status = "okay";
-		};
-
-		pci@2,0 {
-			status = "okay";
-		};
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000200 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <8>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "auo,b101aw03", "simple-panel";
-
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		pci_vdd_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_1v05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_pnl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_bl_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_5v0_hdmi: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "VDDIO_HDMI";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-harmony",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Harmony";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-iris-512.dts b/src/arm/tegra20-iris-512.dts
deleted file mode 100644
index 8cfb83f42e1f..000000000000
--- a/src/arm/tegra20-iris-512.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-colibri-512.dtsi"
-
-/ {
-	model = "Toradex Colibri T20 512MB on Iris";
-	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	pinmux@70000014 {
-		state_default: pinmux {
-			hdint {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			i2cddc {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			sdio4 {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			uarta {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			uartd {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	i2c_ddc: i2c@7000c400 {
-		status = "okay";
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <4>;
-		vmmc-supply = <&vcc_sd_reg>;
-		vqmmc-supply = <&vcc_sd_reg>;
-	};
-
-	regulators {
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_host_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		vcc_sd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vcc_sd";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-medcom-wide.dts b/src/arm/tegra20-medcom-wide.dts
deleted file mode 100644
index 1b7c56b33aca..000000000000
--- a/src/arm/tegra20-medcom-wide.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-tamonten.dtsi"
-
-/ {
-	model = "Avionic Design Medcom-Wide board";
-	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-				nvidia,panel = <&panel>;
-			};
-		};
-	};
-
-	i2c@7000c000 {
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff
-				    0xffffffff
-				    0
-				    0xffffffff
-				    0xffffffff>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	panel: panel {
-		compatible = "innolux,n156bge-l21", "simple-panel";
-
-		power-supply =  <&vdd_1v8_reg>, <&vdd_3v3_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	sound {
-		compatible = "ad,tegra-audio-wm8903-medcom-wide",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Avionic Design Medcom-Wide";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
-
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-paz00.dts b/src/arm/tegra20-paz00.dts
deleted file mode 100644
index d4438e30de45..000000000000
--- a/src/arm/tegra20-paz00.dts
+++ /dev/null
@@ -1,596 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "Toshiba AC100 / Dynabook AZ";
-	compatible = "compal,paz00", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata", "atc", "atd", "ate",
-					"dap2", "gmb", "gmc", "gmd", "spia",
-					"spib", "spic", "spid", "spie";
-				nvidia,function = "gmi";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "pllc_out1";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gpu {
-				nvidia,pins = "gpu", "sdb", "sdd";
-				nvidia,function = "pwm";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "pta";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uarta";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			kbcb {
-				nvidia,pins = "kbcb", "kbcd";
-				nvidia,function = "sdio2";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc";
-				nvidia,function = "owr";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdc {
-				nvidia,pins = "sdc";
-				nvidia,function = "twc";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spi4";
-			};
-			spdi {
-				nvidia,pins = "spdi", "spdo";
-				nvidia,function = "rsvd2";
-			};
-			spif {
-				nvidia,pins = "spif", "uac";
-				nvidia,function = "rsvd4";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "spdif";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dap2", "dtf",
-					"gma", "gmb", "gmc", "gmd", "gme",
-					"gpu", "gpu7", "gpv", "i2cp", "pta",
-					"rm", "sdio1", "slxk", "spdo", "uac",
-					"uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
-					"dtc", "dte", "slxa", "slxc", "slxd",
-					"spdi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spia", "spib", "spid",
-					"spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
-					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"spic", "spig", "uaa", "uab";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
-					"spie", "spih", "uad", "uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhs", "lsc0", "lspi",
-					"lvs", "pmc";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_lcsn {
-				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
-					"lm0", "lm1", "lpp", "lpw0", "lpw1",
-					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "lvp1", "sdb";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006200 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	lvds_ddc: i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		alc5632: alc5632@1e {
-			compatible = "realtek,alc5632";
-			reg = <0x1e>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	nvec@7000c500 {
-		compatible = "nvidia,nvec";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <80000>;
-		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-		slave-addr = <138>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
-		         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&p5valw_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "+1.2vs_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "+1.0vs_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "+3.7vs_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "+1.1vs_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "+1.2vs_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "+3.3vs_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "+2.85vs_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					/*
-					 * Research indicates this should be
-					 * 1.8v; other boards that use this
-					 * rail for the same purpose need it
-					 * set to 1.8v. The schematic signal
-					 * name is incorrect; perhaps copied
-					 * from an incorrect NVIDIA reference.
-					 */
-					regulator-name = "+2.85vs_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "+3.3vs_rtc";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		adt7461@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <0>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
-		default-brightness-level = <10>;
-
-		backlight-boot-off;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		wifi {
-			label = "wifi-led";
-			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "rfkill0";
-		};
-	};
-
-	panel: panel {
-		compatible = "samsung,ltn101nt05", "simple-panel";
-
-		ddc-i2c-bus = <&lvds_ddc>;
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		p5valw_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+5valw";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_pnl_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+3VS,vdd_pnl";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-alc5632-paz00",
-			"nvidia,tegra-audio-alc5632";
-
-		nvidia,model = "Compal PAZ00";
-
-		nvidia,audio-routing =
-			"Int Spk", "SPKOUT",
-			"Int Spk", "SPKOUTN",
-			"Headset Mic", "MICBIAS1",
-			"MIC1", "Headset Mic",
-			"Headset Stereophone", "HPR",
-			"Headset Stereophone", "HPL",
-			"DMICDAT", "Digital Mic";
-
-		nvidia,audio-codec = <&alc5632>;
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-		         <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-		         <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-plutux.dts b/src/arm/tegra20-plutux.dts
deleted file mode 100644
index a10b415bbdee..000000000000
--- a/src/arm/tegra20-plutux.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-tamonten.dtsi"
-
-/ {
-	model = "Avionic Design Plutux board";
-	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	i2c@7000c000 {
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff
-				    0xffffffff
-				    0
-				    0xffffffff
-				    0xffffffff>;
-		};
-	};
-
-	sound {
-		compatible = "ad,tegra-audio-plutux",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Avionic Design Plutux";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
-
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-seaboard.dts b/src/arm/tegra20-seaboard.dts
deleted file mode 100644
index a1d4bf9895d7..000000000000
--- a/src/arm/tegra20-seaboard.dts
+++ /dev/null
@@ -1,923 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Seaboard";
-	compatible = "nvidia,seaboard", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "spia",
-					"spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp", "lm1";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gmd {
-				nvidia,pins = "gmd";
-				nvidia,function = "sflash";
-			};
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "pwm";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
-					"lsck", "lsda";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
-					"lsdi", "lvp0";
-				nvidia,function = "rsvd4";
-			};
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
-					"lspi", "lvp1", "lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "sdio3";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd",
-					"cdev1", "cdev2", "dap1", "dap2",
-					"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
-					"gme", "gpu", "gpu7", "i2cp", "irrx",
-					"irtx", "pta", "rm", "sdc", "sdd",
-					"slxd", "slxk", "spdi", "spdo", "uac",
-					"uad", "uca", "ucb", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ate {
-				nvidia,pins = "ate", "csus", "dap3",
-					"gpv", "owc", "slxc", "spib", "spid",
-					"spie";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "gmb", "slxa", "spia",
-					"spig", "spih";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_dte {
-				nvidia,pins = "dte", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf", "sdio1", "spic", "uaa",
-					"uab";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "pmc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux_i2cmux_pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-
-		state_i2cmux_idle: pinmux_i2cmux_idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		/* ALS and proximity sensor */
-		isl29018@44 {
-			compatible = "isil,isl29018";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gyrometer@68 {
-			compatible = "invn,mpu3050";
-			reg = <0x68>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "smart-battery-1.1";
-				reg = <0xb>;
-				ti,i2c-retry-count = <2>;
-				ti,poll-retry-count = <10>;
-			};
-		};
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		magnetometer@c {
-			compatible = "ak,ak8975";
-			reg = <0xc>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1125000>;
-					regulator-max-microvolt = <1125000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-		};
-	};
-
-	kbc@7000e200 {
-		status = "okay";
-		nvidia,debounce-delay-ms = <32>;
-		nvidia,repeat-delay-ms = <160>;
-		nvidia,ghost-filter;
-		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
-		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
-				MATRIX_KEY(0x00, 0x03, KEY_S)
-				MATRIX_KEY(0x00, 0x04, KEY_A)
-				MATRIX_KEY(0x00, 0x05, KEY_Z)
-				MATRIX_KEY(0x00, 0x07, KEY_FN)
-
-				MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA)
-				MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT)
-				MATRIX_KEY(0x02, 0x07, KEY_LEFTALT)
-
-				MATRIX_KEY(0x03, 0x00, KEY_5)
-				MATRIX_KEY(0x03, 0x01, KEY_4)
-				MATRIX_KEY(0x03, 0x02, KEY_R)
-				MATRIX_KEY(0x03, 0x03, KEY_E)
-				MATRIX_KEY(0x03, 0x04, KEY_F)
-				MATRIX_KEY(0x03, 0x05, KEY_D)
-				MATRIX_KEY(0x03, 0x06, KEY_X)
-
-				MATRIX_KEY(0x04, 0x00, KEY_7)
-				MATRIX_KEY(0x04, 0x01, KEY_6)
-				MATRIX_KEY(0x04, 0x02, KEY_T)
-				MATRIX_KEY(0x04, 0x03, KEY_H)
-				MATRIX_KEY(0x04, 0x04, KEY_G)
-				MATRIX_KEY(0x04, 0x05, KEY_V)
-				MATRIX_KEY(0x04, 0x06, KEY_C)
-				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
-
-				MATRIX_KEY(0x05, 0x00, KEY_9)
-				MATRIX_KEY(0x05, 0x01, KEY_8)
-				MATRIX_KEY(0x05, 0x02, KEY_U)
-				MATRIX_KEY(0x05, 0x03, KEY_Y)
-				MATRIX_KEY(0x05, 0x04, KEY_J)
-				MATRIX_KEY(0x05, 0x05, KEY_N)
-				MATRIX_KEY(0x05, 0x06, KEY_B)
-				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
-
-				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
-				MATRIX_KEY(0x06, 0x01, KEY_0)
-				MATRIX_KEY(0x06, 0x02, KEY_O)
-				MATRIX_KEY(0x06, 0x03, KEY_I)
-				MATRIX_KEY(0x06, 0x04, KEY_L)
-				MATRIX_KEY(0x06, 0x05, KEY_K)
-				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
-				MATRIX_KEY(0x06, 0x07, KEY_M)
-
-				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
-				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
-				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
-				MATRIX_KEY(0x07, 0x07, KEY_MENU)
-
-				MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT)
-				MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT)
-
-				MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL)
-				MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL)
-
-				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
-				MATRIX_KEY(0x0B, 0x01, KEY_P)
-				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
-				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
-				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
-				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
-
-				MATRIX_KEY(0x0C, 0x00, KEY_F10)
-				MATRIX_KEY(0x0C, 0x01, KEY_F9)
-				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
-				MATRIX_KEY(0x0C, 0x03, KEY_3)
-				MATRIX_KEY(0x0C, 0x04, KEY_2)
-				MATRIX_KEY(0x0C, 0x05, KEY_UP)
-				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
-				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
-
-				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
-				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
-				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
-				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
-				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
-				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
-				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
-
-				MATRIX_KEY(0x0E, 0x00, KEY_F11)
-				MATRIX_KEY(0x0E, 0x01, KEY_F12)
-				MATRIX_KEY(0x0E, 0x02, KEY_F8)
-				MATRIX_KEY(0x0E, 0x03, KEY_Q)
-				MATRIX_KEY(0x0E, 0x04, KEY_F4)
-				MATRIX_KEY(0x0E, 0x05, KEY_F3)
-				MATRIX_KEY(0x0E, 0x06, KEY_1)
-				MATRIX_KEY(0x0E, 0x07, KEY_F7)
-
-				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
-				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
-				MATRIX_KEY(0x0F, 0x02, KEY_F5)
-				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
-				MATRIX_KEY(0x0F, 0x04, KEY_F1)
-				MATRIX_KEY(0x0F, 0x05, KEY_F2)
-				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
-				MATRIX_KEY(0x0F, 0x07, KEY_F6)
-
-				/* Software Handled Function Keys */
-				MATRIX_KEY(0x14, 0x00, KEY_KP7)
-
-				MATRIX_KEY(0x15, 0x00, KEY_KP9)
-				MATRIX_KEY(0x15, 0x01, KEY_KP8)
-				MATRIX_KEY(0x15, 0x02, KEY_KP4)
-				MATRIX_KEY(0x15, 0x04, KEY_KP1)
-
-				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
-				MATRIX_KEY(0x16, 0x02, KEY_KP6)
-				MATRIX_KEY(0x16, 0x03, KEY_KP5)
-				MATRIX_KEY(0x16, 0x04, KEY_KP3)
-				MATRIX_KEY(0x16, 0x05, KEY_KP2)
-				MATRIX_KEY(0x16, 0x07, KEY_KP0)
-
-				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
-				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
-				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
-				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
-
-				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
-
-				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
-				MATRIX_KEY(0x1D, 0x04, KEY_END)
-				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN)
-				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
-				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP)
-
-				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
-				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
-				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
-
-				MATRIX_KEY(0x1F, 0x04, KEY_HELP)>;
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	memory-controller@7000f400 {
-		emc-table@190000 {
-			reg = <190000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <190000>;
-			nvidia,emc-registers = <0x0000000c 0x00000026
-				0x00000009 0x00000003 0x00000004 0x00000004
-				0x00000002 0x0000000c 0x00000003 0x00000003
-				0x00000002 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x0000059f
-				0x00000000 0x00000003 0x00000003 0x00000003
-				0x00000003 0x00000001 0x0000000b 0x000000c8
-				0x00000003 0x00000007 0x00000004 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xa06204ae
-				0x007dc010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-
-		emc-table@380000 {
-			reg = <380000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <380000>;
-			nvidia,emc-registers = <0x00000017 0x0000004b
-				0x00000012 0x00000006 0x00000004 0x00000005
-				0x00000003 0x0000000c 0x00000006 0x00000006
-				0x00000003 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x00000b5f
-				0x00000000 0x00000003 0x00000003 0x00000006
-				0x00000006 0x00000001 0x00000011 0x000000c8
-				0x00000003 0x0000000e 0x00000007 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xe044048b
-				0x007d8010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-	};
-
-	usb@c5000000 {
-		status = "okay";
-		dr_mode = "otg";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		vbus-supply = <&vbus_reg>;
-		dr_mode = "otg";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	sdhci@c8000400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 2 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		lid {
-			label = "Lid";
-			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
-
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&lvds_ddc>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_vbus_wup1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_pnl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_bl_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-seaboard",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Seaboard";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1R", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-tamonten.dtsi b/src/arm/tegra20-tamonten.dtsi
deleted file mode 100644
index 80e7d386ce34..000000000000
--- a/src/arm/tegra20-tamonten.dtsi
+++ /dev/null
@@ -1,528 +0,0 @@
-#include "tegra20.dtsi"
-
-/ {
-	model = "Avionic Design Tamonten SOM";
-	compatible = "ad,tamonten", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
-					"spia", "spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			dta {
-				nvidia,pins = "dta", "dtd";
-				nvidia,function = "sdio2";
-			};
-			dtb {
-				nvidia,pins = "dtb", "dtc", "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uarta";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
-					"slxc", "slxd", "spdi", "spdo", "spig",
-					"uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "dta", "dtd", "kbca",
-					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "owc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "pmc";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux_i2cmux_pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-
-		state_i2cmux_idle: pinmux_i2cmux_idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <100000>;
-		status = "okay";
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c@7000d000 {
-		clock-frequency = <400000>;
-		status = "okay";
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			/* vdd_5v0_reg must be provided by the base board */
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sys_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sys_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sys_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				pci_clk_reg: ldo0 {
-					regulator-name = "vdd_ldo0,vddio_pex_clk";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					/*
-					 * According to the Tegra 2 Automotive
-					 * DataSheet, a typical value for this
-					 * would be 2.8V, but the PMIC only
-					 * supports 2.85V.
-					 */
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
-					/*
-					 * According to the Tegra 2 Automotive
-					 * DataSheet, a typical value for this
-					 * would be 2.8V, but the PMIC only
-					 * supports 2.85V.
-					 */
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	pcie-controller@80003000 {
-		avdd-pex-supply = <&pci_vdd_reg>;
-		vdd-pex-supply = <&pci_vdd_reg>;
-		avdd-pex-pll-supply = <&pci_vdd_reg>;
-		avdd-plle-supply = <&pci_vdd_reg>;
-		vddio-pex-clk-supply = <&pci_clk_reg>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000600 {
-		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		status = "okay";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pci_vdd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&pmic 2 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/src/arm/tegra20-tec.dts b/src/arm/tegra20-tec.dts
deleted file mode 100644
index c12d8bead2ee..000000000000
--- a/src/arm/tegra20-tec.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-tamonten.dtsi"
-
-/ {
-	model = "Avionic Design Tamonten Evaluation Carrier";
-	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	i2c@7000c000 {
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff
-				    0xffffffff
-				    0
-				    0xffffffff
-				    0xffffffff>;
-		};
-	};
-
-	pcie-controller@80003000 {
-		status = "okay";
-
-		pci@1,0 {
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "ad,tegra-audio-wm8903-tec",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Avionic Design TEC";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
-
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-trimslice.dts b/src/arm/tegra20-trimslice.dts
deleted file mode 100644
index 5ad87979ab13..000000000000
--- a/src/arm/tegra20-trimslice.dts
+++ /dev/null
@@ -1,467 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "Compulab TrimSlice board";
-	compatible = "compulab,trimslice", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000c500/rtc@56";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc", "gmb";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gme", "pta";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc", "gmd";
-				nvidia,function = "sflash";
-			};
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "uarta";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "sdio3";
-			};
-			spdi {
-				nvidia,pins = "spdi", "spdo";
-				nvidia,function = "spdif";
-			};
-			spia {
-				nvidia,pins = "spia", "spib", "spic";
-				nvidia,function = "spi2";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atc", "atd", "ate",
-					"crtp", "dap2", "dap3", "dap4", "dta",
-					"dtb", "dtc", "dtd", "dte", "gmb",
-					"gme", "i2cp", "pta", "slxc", "slxd",
-					"spdi", "spdo", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_atb {
-				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
-					"gma", "gmc", "gmd", "gpu", "gpu7",
-					"gpv", "sdio1", "slxa", "slxk", "uac";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spia", "spib",
-					"spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "pmc";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
-					"kbcc", "kbcd", "kbce", "kbcf", "owc",
-					"spic", "spie", "spig", "spih", "uaa",
-					"uab", "uad", "uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			conf_spif {
-				nvidia,pins = "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	dvi_ddc: i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	spi@7000c380 {
-		status = "okay";
-		spi-max-frequency = <48000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q80bl";
-			reg = <0>;
-			spi-max-frequency = <48000000>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		codec: codec@1a {
-			compatible = "ti,tlv320aic23";
-			reg = <0x1a>;
-		};
-
-		rtc@56 {
-			compatible = "emmicro,em3027";
-			reg = <0x56>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	pcie-controller@80003000 {
-		status = "okay";
-
-		avdd-pex-supply = <&pci_vdd_reg>;
-		vdd-pex-supply = <&pci_vdd_reg>;
-		avdd-pex-pll-supply = <&pci_vdd_reg>;
-		avdd-plle-supply = <&pci_vdd_reg>;
-		vddio-pex-clk-supply = <&pci_clk_reg>;
-
-		pci@1,0 {
-			status = "okay";
-		};
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		vbus-supply = <&vbus_reg>;
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hdmi_vdd_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "avdd_hdmi";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		hdmi_pll_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "avdd_hdmi_pll";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pci_clk_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "pci_clk";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		pci_vdd_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "pci_vdd";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-trimslice";
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&codec>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-ventana.dts b/src/arm/tegra20-ventana.dts
deleted file mode 100644
index ca8484cccddc..000000000000
--- a/src/arm/tegra20-ventana.dts
+++ /dev/null
@@ -1,701 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra20 Ventana evaluation board";
-	compatible = "nvidia,ventana", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "spia",
-					"spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp", "lm1";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gmd {
-				nvidia,pins = "gmd";
-				nvidia,function = "sflash";
-			};
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "pwm";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
-					"lsdi", "lvp0";
-				nvidia,function = "rsvd4";
-			};
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
-					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
-					"lspi", "lvp1", "lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd", "slxc";
-				nvidia,function = "sdio3";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxd {
-				nvidia,pins = "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd",
-					"cdev1", "cdev2", "dap1", "dap2",
-					"dap4", "ddc", "dtf", "gma", "gmc",
-					"gme", "gpu", "gpu7", "i2cp", "irrx",
-					"irtx", "pta", "rm", "sdc", "sdd",
-					"slxc", "slxd", "slxk", "spdi", "spdo",
-					"uac", "uad", "uca", "ucb", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ate {
-				nvidia,pins = "ate", "csus", "dap3", "gmd",
-					"gpv", "owc", "spia", "spib", "spic",
-					"spid", "spie", "spig";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "gmb", "slxa", "spih";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_dte {
-				nvidia,pins = "dte", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf", "sdio1", "uaa", "uab";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
-					"lvp1", "lvs", "pmc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux_i2cmux_pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-
-		state_i2cmux_idle: pinmux_i2cmux_idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		/* ALS and proximity sensor */
-		isl29018@44 {
-			compatible = "isil,isl29018";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <100>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <458>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	sdhci@c8000400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 2 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
-
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&lvds_ddc>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_pnl_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_bl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-ventana",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Ventana";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-whistler.dts b/src/arm/tegra20-whistler.dts
deleted file mode 100644
index 1843725785c9..000000000000
--- a/src/arm/tegra20-whistler.dts
+++ /dev/null
@@ -1,631 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra20 Whistler evaluation board";
-	compatible = "nvidia,whistler", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/max8907@3c";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
-					"gmc", "gmd", "gpu";
-				nvidia,function = "gmi";
-			};
-			atc {
-				nvidia,pins = "atc", "atd";
-				nvidia,function = "sdio4";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "osc";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,function = "vi";
-			};
-			dte {
-				nvidia,pins = "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gme {
-				nvidia,pins = "gme";
-				nvidia,function = "dap5";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "pta";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			kbcb {
-				nvidia,pins = "kbcb", "kbcd";
-				nvidia,function = "sdio2";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
-					"spia", "spib", "spic";
-				nvidia,function = "spi3";
-			};
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldc", "ldi",
-					"lhp0", "lhp1", "lhp2", "lhs", "lm0",
-					"lm1", "lpp", "lpw0", "lpw1", "lpw2",
-					"lsc0", "lsc1", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "uac";
-				nvidia,function = "owr";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd", "slxa",
-					"slxc", "slxd", "slxk";
-				nvidia,function = "sdio3";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			spdi {
-				nvidia,pins = "spdi", "spdo";
-				nvidia,function = "rsvd2";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			spif {
-				nvidia,pins = "spif";
-				nvidia,function = "spi2";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab";
-				nvidia,function = "uarta";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			uda {
-				nvidia,pins = "uda";
-				nvidia,function = "spi1";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
-					"gmb", "gmc", "gmd", "irrx", "irtx",
-					"kbca", "kbcb", "kbcc", "kbcd", "kbce",
-					"kbcf", "sdc", "sdd", "spie", "spig",
-					"spih", "uaa", "uab", "uad", "uca",
-					"ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_atd {
-				nvidia,pins = "atd", "ate", "cdev1", "csus",
-					"dap1", "dap2", "dap3", "dap4", "dte",
-					"dtf", "gpu", "gpu7", "gpv", "i2cp",
-					"rm", "sdio1", "slxa", "slxc", "slxd",
-					"slxk", "spdi", "spdo", "uac", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_cdev2 {
-				nvidia,pins = "cdev2", "spia", "spib";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "lc", "pmca",
-					"pmcb", "pmcc", "pmcd", "xm2c",
-					"xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd",
-					"spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_gme {
-				nvidia,pins = "gme", "owc", "pta", "spic";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			conf_ls {
-				nvidia,pins = "ls", "pmce";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			drive_dap1 {
-				nvidia,pins = "drive_dap1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_8>;
-				nvidia,pull-down-strength = <0>;
-				nvidia,pull-up-strength = <0>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		codec: codec@1a {
-			compatible = "wlf,wm8753";
-			reg = <0x1a>;
-		};
-
-		tca6416: gpio@20 {
-			compatible = "ti,tca6416";
-			reg = <0x20>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		max8907@3c {
-			compatible = "maxim,max8907";
-			reg = <0x3c>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			maxim,system-power-controller;
-
-			mbatt-supply = <&usb0_vbus_reg>;
-			in-v1-supply = <&mbatt_reg>;
-			in-v2-supply = <&mbatt_reg>;
-			in-v3-supply = <&mbatt_reg>;
-			in1-supply = <&mbatt_reg>;
-			in2-supply = <&nvvdd_sv3_reg>;
-			in3-supply = <&mbatt_reg>;
-			in4-supply = <&mbatt_reg>;
-			in5-supply = <&mbatt_reg>;
-			in6-supply = <&mbatt_reg>;
-			in7-supply = <&mbatt_reg>;
-			in8-supply = <&mbatt_reg>;
-			in9-supply = <&mbatt_reg>;
-			in10-supply = <&mbatt_reg>;
-			in11-supply = <&mbatt_reg>;
-			in12-supply = <&mbatt_reg>;
-			in13-supply = <&mbatt_reg>;
-			in14-supply = <&mbatt_reg>;
-			in15-supply = <&mbatt_reg>;
-			in16-supply = <&mbatt_reg>;
-			in17-supply = <&nvvdd_sv3_reg>;
-			in18-supply = <&nvvdd_sv3_reg>;
-			in19-supply = <&mbatt_reg>;
-			in20-supply = <&mbatt_reg>;
-
-			regulators {
-				mbatt_reg: mbatt {
-					regulator-name = "vbat_pmu";
-					regulator-always-on;
-				};
-
-				sd1 {
-					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sd2 {
-					regulator-name = "nvvdd_sv2,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				nvvdd_sv3_reg: sd3 {
-					regulator-name = "nvvdd_sv3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo1 {
-					regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "nvvdd_ldo2,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3 {
-					regulator-name = "nvvdd_ldo3,vcom_1v8b";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "nvvdd_ldo4,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				hdmi_pll_reg: ldo6 {
-					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo7 {
-					regulator-name = "nvvdd_ldo7,avddio_audio";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo8 {
-					regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo9 {
-					regulator-name = "nvvdd_ldo9,avdd_cam*";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10 {
-					regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				hdmi_vdd_reg: ldo11 {
-					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12 {
-					regulator-name = "nvvdd_ldo12,vddio_sdio";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo13 {
-					regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo14 {
-					regulator-name = "nvvdd_ldo14,avdd_vdac";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo15 {
-					regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo16 {
-					regulator-name = "nvvdd_ldo16,vdd_dbrtr";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				ldo17 {
-					regulator-name = "nvvdd_ldo17,vddio_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo18 {
-					regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo19 {
-					regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo20 {
-					regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				out5v {
-					regulator-name = "usb0_vbus_reg";
-				};
-
-				out33v {
-					regulator-name = "pmu_out3v3";
-				};
-
-				bbat {
-					regulator-name = "pmu_bbat";
-					regulator-min-microvolt = <2400000>;
-					regulator-max-microvolt = <2400000>;
-					regulator-always-on;
-				};
-
-				sdby {
-					regulator-name = "vdd_aon";
-					regulator-always-on;
-				};
-
-				vrtc {
-					regulator-name = "vrtc,pmu_vccadc";
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	kbc@7000e200 {
-		status = "okay";
-		nvidia,debounce-delay-ms = <20>;
-		nvidia,repeat-delay-ms = <160>;
-		nvidia,kbc-row-pins = <0 1 2>;
-		nvidia,kbc-col-pins = <16 17>;
-		nvidia,wakeup-source;
-		linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER)
-				MATRIX_KEY(0x01, 0x00, KEY_HOME)
-				MATRIX_KEY(0x01, 0x01, KEY_BACK)
-				MATRIX_KEY(0x02, 0x01, KEY_MENU)>;
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <1000>;
-		nvidia,core-pwr-good-time = <0 3845>;
-		nvidia,core-pwr-off-time = <93727>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-		nvidia,combined-power-req;
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		vbus-supply = <&vbus1_reg>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		vbus-supply = <&vbus3_reg>;
-	};
-
-	sdhci@c8000400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		bus-width = <8>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb0_vbus_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vbus1_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vbus1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vbus3_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vbus3";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8753-whistler",
-			     "nvidia,tegra-audio-wm8753";
-		nvidia,model = "NVIDIA Tegra Whistler";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "LOUT1",
-			"Headphone Jack", "ROUT1",
-			"MIC2", "Mic Jack",
-			"MIC2N", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&codec>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20.dtsi b/src/arm/tegra20.dtsi
deleted file mode 100644
index 1908f6937e53..000000000000
--- a/src/arm/tegra20.dtsi
+++ /dev/null
@@ -1,782 +0,0 @@
-#include <dt-bindings/clock/tegra20-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra20";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
-	host1x@50000000 {
-		compatible = "nvidia,tegra20-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe@54040000 {
-			compatible = "nvidia,tegra20-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-		};
-
-		vi@54080000 {
-			compatible = "nvidia,tegra20-vi";
-			reg = <0x54080000 0x00040000>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_VI>;
-			resets = <&tegra_car 20>;
-			reset-names = "vi";
-		};
-
-		epp@540c0000 {
-			compatible = "nvidia,tegra20-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-		};
-
-		isp@54100000 {
-			compatible = "nvidia,tegra20-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d@54140000 {
-			compatible = "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d@54140000 {
-			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54140000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi@54280000 {
-			compatible = "nvidia,tegra20-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		tvo@542c0000 {
-			compatible = "nvidia,tegra20-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_TVO>;
-			status = "disabled";
-		};
-
-		dsi@542c0000 {
-			compatible = "nvidia,tegra20-dsi";
-			reg = <0x542c0000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_DSI>;
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-		};
-	};
-
-	timer@50004600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x50040600 0x20>;
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-		clocks = <&tegra_car TEGRA20_CLK_TWD>;
-	};
-
-	intc: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a9-gic";
-		reg = <0x50041000 0x1000
-		       0x50040100 0x0100>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	cache-controller@50043000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x50043000 0x1000>;
-		arm,data-latency = <5 5 2>;
-		arm,tag-latency = <4 4 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	timer@60005000 {
-		compatible = "nvidia,tegra20-timer";
-		reg = <0x60005000 0x60>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_TIMER>;
-	};
-
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra20-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra20-apbdma";
-		reg = <0x6000a000 0x1200>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	ahb@6000c004 {
-		compatible = "nvidia,tegra20-ahb";
-		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra20-gpio";
-		reg = <0x6000d000 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
-	};
-
-	pinmux: pinmux@70000014 {
-		compatible = "nvidia,tegra20-pinmux";
-		reg = <0x70000014 0x10   /* Tri-state registers */
-		       0x70000080 0x20   /* Mux registers */
-		       0x700000a0 0x14   /* Pull-up/down registers */
-		       0x70000868 0xa8>; /* Pad control registers */
-	};
-
-	das@70000c00 {
-		compatible = "nvidia,tegra20-das";
-		reg = <0x70000c00 0x80>;
-	};
-
-	tegra_ac97: ac97@70002000 {
-		compatible = "nvidia,tegra20-ac97";
-		reg = <0x70002000 0x200>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_AC97>;
-		resets = <&tegra_car 3>;
-		reset-names = "ac97";
-		dmas = <&apbdma 12>, <&apbdma 12>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	tegra_i2s1: i2s@70002800 {
-		compatible = "nvidia,tegra20-i2s";
-		reg = <0x70002800 0x200>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
-		resets = <&tegra_car 11>;
-		reset-names = "i2s";
-		dmas = <&apbdma 2>, <&apbdma 2>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	tegra_i2s2: i2s@70002a00 {
-		compatible = "nvidia,tegra20-i2s";
-		reg = <0x70002a00 0x200>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
-		resets = <&tegra_car 18>;
-		reset-names = "i2s";
-		dmas = <&apbdma 1>, <&apbdma 1>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
-	 * driver, the comptible is "nvidia,tegra20-hsuart".
-	 */
-	uarta: serial@70006000 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartb: serial@70006040 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartc: serial@70006200 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartd: serial@70006300 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uarte: serial@70006400 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006400 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA20_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	rtc@7000e000 {
-		compatible = "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_RTC>;
-	};
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C1>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000c380 {
-		compatible = "nvidia,tegra20-sflash";
-		reg = <0x7000c380 0x80>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SPI>;
-		resets = <&tegra_car 43>;
-		reset-names = "spi";
-		dmas = <&apbdma 11>, <&apbdma 11>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c400 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c400 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C2>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c500 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000d000 {
-		compatible = "nvidia,tegra20-i2c-dvc";
-		reg = <0x7000d000 0x200>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_DVC>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d400 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d400 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC1>;
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d600 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d600 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC2>;
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d800 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d800 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC3>;
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000da00 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000da00 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC4>;
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	kbc@7000e200 {
-		compatible = "nvidia,tegra20-kbc";
-		reg = <0x7000e200 0x100>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_KBC>;
-		resets = <&tegra_car 36>;
-		reset-names = "kbc";
-		status = "disabled";
-	};
-
-	pmc@7000e400 {
-		compatible = "nvidia,tegra20-pmc";
-		reg = <0x7000e400 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	memory-controller@7000f000 {
-		compatible = "nvidia,tegra20-mc";
-		reg = <0x7000f000 0x024
-		       0x7000f03c 0x3c4>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	iommu@7000f024 {
-		compatible = "nvidia,tegra20-gart";
-		reg = <0x7000f024 0x00000018	/* controller registers */
-		       0x58000000 0x02000000>;	/* GART aperture */
-	};
-
-	memory-controller@7000f400 {
-		compatible = "nvidia,tegra20-emc";
-		reg = <0x7000f400 0x200>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra20-efuse";
-		reg = <0x7000F800 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	pcie-controller@80003000 {
-		compatible = "nvidia,tegra20-pcie";
-		device_type = "pci";
-		reg = <0x80003000 0x00000800   /* PADS registers */
-		       0x80003800 0x00000200   /* AFI registers */
-		       0x90000000 0x10000000>; /* configuration space */
-		reg-names = "pads", "afi", "cs";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
-			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
-		interrupt-names = "intr", "msi";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
-		bus-range = <0x00 0xff>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
-			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
-			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
-			  0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
-
-		clocks = <&tegra_car TEGRA20_CLK_PEX>,
-			 <&tegra_car TEGRA20_CLK_AFI>,
-			 <&tegra_car TEGRA20_CLK_PLL_E>;
-		clock-names = "pex", "afi", "pll_e";
-		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
-		reset-names = "pex", "afi", "pcie_x";
-		status = "disabled";
-
-		pci@1,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
-			reg = <0x000800 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@2,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
-			reg = <0x001000 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-	};
-
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5000000 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		nvidia,has-legacy-mode;
-		clocks = <&tegra_car TEGRA20_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,needs-double-reset;
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@c5000000 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA20_CLK_USBD>,
-			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_CLK_M>,
-			 <&tegra_car TEGRA20_CLK_USBD>;
-		clock-names = "reg", "pll_u", "timer", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,has-legacy-mode;
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <1>;
-		nvidia,xcvr-lsrslew = <1>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@c5004000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5004000 0x4000>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "ulpi";
-		clocks = <&tegra_car TEGRA20_CLK_USB2>;
-		resets = <&tegra_car 58>;
-		reset-names = "usb";
-		nvidia,phy = <&phy2>;
-		status = "disabled";
-	};
-
-	phy2: usb-phy@c5004000 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5004000 0x4000>;
-		phy_type = "ulpi";
-		clocks = <&tegra_car TEGRA20_CLK_USB2>,
-			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_CDEV2>;
-		clock-names = "reg", "pll_u", "ulpi-link";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		status = "disabled";
-	};
-
-	usb@c5008000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5008000 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA20_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@c5008000 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA20_CLK_USB3>,
-			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_CLK_M>,
-			 <&tegra_car TEGRA20_CLK_USBD>;
-		clock-names = "reg", "pll_u", "timer", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		status = "disabled";
-	};
-
-	sdhci@c8000000 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000000 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@c8000200 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000200 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@c8000400 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000400 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@c8000600 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000600 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/src/arm/tegra30-apalis-eval.dts b/src/arm/tegra30-apalis-eval.dts
deleted file mode 100644
index 45d40f024585..000000000000
--- a/src/arm/tegra30-apalis-eval.dts
+++ /dev/null
@@ -1,260 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra30-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis T30 on Apalis Evaluation Board";
-	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000c000/rtc@68";
-		rtc1 = "/i2c@7000d000/tps65911@2d";
-		rtc2 = "/rtc@7000e000";
-	};
-
-	pcie-controller@00003000 {
-		status = "okay";
-
-		pci@1,0 {
-			status = "okay";
-		};
-
-		pci@2,0 {
-			status = "okay";
-		};
-
-		pci@3,0 {
-			status = "okay";
-		};
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-				nvidia,panel = <&panel>;
-			};
-		};
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	serial@70006300 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	/*
-	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
-	 * board)
-	 */
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
-		/* M41T0M6 real time clock on carrier board */
-		rtc@68 {
-			compatible = "st,m41t00";
-			reg = <0x68>;
-		};
-	};
-
-	/* GEN2_I2C: unused */
-
-	/*
-	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
-	 * carrier board)
-	 */
-	cami2c: i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
-	hdmiddc: i2c@7000c700 {
-		status = "okay";
-	};
-
-	/* SPI1: Apalis SPI1 */
-	spi@7000d400 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spidev0: spidev@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <25000000>;
-		};
-	};
-
-	/* SPI5: Apalis SPI2 */
-	spi@7000dc00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spidev1: spidev@2 {
-			compatible = "spidev";
-			reg = <2>;
-			spi-max-frequency = <25000000>;
-		};
-	};
-
-	sd1: sdhci@78000000 {
-		status = "okay";
-		bus-width = <4>;
-		/* SD1_CD# */
-		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
-		no-1-8-v;
-	};
-
-	mmc1: sdhci@78000400 {
-		status = "okay";
-		bus-width = <8>;
-		/* MMC1_CD# */
-		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-		no-1-8-v;
-	};
-
-	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		vbus-supply = <&usbo1_vbus_reg>;
-	};
-
-	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@7d004000 {
-		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
-	};
-
-	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		/* PWM0 */
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <255 231 223 207 191 159 127 0>;
-		default-brightness-level = <6>;
-		/* BKL1_ON */
-		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu", "simple-panel";
-
-		backlight = <&backlight>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pwm1 {
-			label = "PWM1";
-			pwms = <&pwm 3 19600>;
-			max-brightness = <255>;
-		};
-
-		pwm2 {
-			label = "PWM2";
-			pwms = <&pwm 2 19600>;
-			max-brightness = <255>;
-		};
-
-		pwm3 {
-			label = "PWM3";
-			pwms = <&pwm 1 19600>;
-			max-brightness = <255>;
-		};
-	};
-
-	regulators {
-		sys_5v0_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		/* USBO1_EN */
-		usbo1_vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usbo1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&sys_5v0_reg>;
-		};
-
-		/* USBH_EN */
-		usbh_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&sys_5v0_reg>;
-		};
-	};
-};
diff --git a/src/arm/tegra30-apalis.dtsi b/src/arm/tegra30-apalis.dtsi
deleted file mode 100644
index a5446cba9804..000000000000
--- a/src/arm/tegra30-apalis.dtsi
+++ /dev/null
@@ -1,687 +0,0 @@
-#include "tegra30.dtsi"
-
-/*
- * Toradex Apalis T30 Device Tree
- * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
- */
-/ {
-	model = "Toradex Apalis T30";
-	compatible = "toradex,apalis_t30", "nvidia,tegra30";
-
-	pcie-controller@00003000 {
-		avdd-pexa-supply = <&vdd2_reg>;
-		vdd-pexa-supply = <&vdd2_reg>;
-		avdd-pexb-supply = <&vdd2_reg>;
-		vdd-pexb-supply = <&vdd2_reg>;
-		avdd-pex-pll-supply = <&vdd2_reg>;
-		avdd-plle-supply = <&ldo6_reg>;
-		vddio-pex-ctl-supply = <&sys_3v3_reg>;
-		hvdd-pex-supply = <&sys_3v3_reg>;
-
-		pci@1,0 {
-			nvidia,num-lanes = <4>;
-		};
-
-		pci@2,0 {
-			nvidia,num-lanes = <1>;
-		};
-
-		pci@3,0 {
-			nvidia,num-lanes = <1>;
-		};
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
-
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			/* Apalis BKL1_ON */
-			pv2 {
-				nvidia,pins = "pv2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis BKL1_PWM */
-			uart3_rts_n_pc0 {
-				nvidia,pins =	"uart3_rts_n_pc0";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
-			uart3_cts_n_pa1 {
-				nvidia,pins =	"uart3_cts_n_pa1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis CAN1 on SPI6 */
-			spi2_cs0_n_px3 {
-				nvidia,pins =   "spi2_cs0_n_px3",
-						"spi2_miso_px1",
-						"spi2_mosi_px0",
-						"spi2_sck_px2";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* CAN_INT1 */
-			spi2_cs1_n_pw2 {
-				nvidia,pins = "spi2_cs1_n_pw2";
-				nvidia,function = "spi3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis CAN2 on SPI4 */
-			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* CAN_INT2 */
-			spi2_cs2_n_pw3 {
-				nvidia,pins = "spi2_cs2_n_pw3";
-				nvidia,function = "spi3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis I2C3 */
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-					      "cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis MMC1 */
-			sdmmc3_clk_pa6 {
-				nvidia,pins =	"sdmmc3_clk_pa6",
-						"sdmmc3_cmd_pa7";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_dat0_pb7 {
-				nvidia,pins =	"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"sdmmc3_dat4_pd1",
-						"sdmmc3_dat5_pd0",
-						"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* Apalis MMC1_CD# */
-			pv3 {
-				nvidia,pins = "pv3";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis PWM1 */
-			gpio_pu6 {
-				nvidia,pins =	"gpio_pu6";
-				nvidia,function = "pwm3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis PWM2 */
-			gpio_pu5 {
-				nvidia,pins =	"gpio_pu5";
-				nvidia,function = "pwm2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis PWM3 */
-			gpio_pu4 {
-				nvidia,pins =	"gpio_pu4";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis PWM4 */
-			gpio_pu3 {
-				nvidia,pins =	"gpio_pu3";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis RESET_MOCI# */
-			gmi_rst_n_pi4 {
-				nvidia,pins = "gmi_rst_n_pi4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis SD1 */
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* Apalis SD1_CD# */
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis SPI1 */
-			spi1_sck_px5 {
-				nvidia,pins =   "spi1_sck_px5",
-						"spi1_mosi_px4",
-						"spi1_miso_px7",
-						"spi1_cs0_n_px6";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis SPI2 */
-			lcd_sck_pz4 {
-				nvidia,pins =   "lcd_sck_pz4",
-						"lcd_sdout_pn5",
-						"lcd_sdin_pz2",
-						"lcd_cs0_n_pn4";
-				nvidia,function = "spi5";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART1 */
-			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART2 */
-			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART3 */
-			uart2_rxd_pc3 {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART4 */
-			uart3_rxd_pw7 {
-				nvidia,pins =   "uart3_rxd_pw7",
-						"uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis USBO1_EN */
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5";
-				nvidia,function = "rsvd4";
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis USBO1_OC# */
-			gen2_i2c_sda_pt6 {
-				nvidia,pins = "gen2_i2c_sda_pt6";
-				nvidia,function = "rsvd4";
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis WAKE1_MICO */
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* eMMC (On-module) */
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* LVDS Transceiver Configuration */
-			pbb0 {
-				nvidia,pins =	"pbb0",
-						"pbb7",
-						"pcc1",
-						"pcc2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			pbb3 {
-				nvidia,pins =	"pbb3",
-						"pbb4",
-						"pbb5",
-						"pbb6";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Power I2C (On-module) */
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-					      "pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-
-			/*
-			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
-			 * temperature sensor therefore requires disabling for
-			 * now
-			 */
-			lcd_dc1_pd2 {
-				nvidia,pins = "lcd_dc1_pd2";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* TOUCH_PEN_INT# */
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	hdmiddc: i2c@7000c700 {
-		clock-frequency = <100000>;
-	};
-
-	/*
-	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
-	 * touch screen controller
-	 */
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&sys_3v3_reg>;
-			vcc2-supply = <&sys_3v3_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&sys_3v3_reg>;
-			vcc5-supply = <&sys_3v3_reg>;
-			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&charge_pump_5v0_reg>;
-			vccio-supply = <&sys_3v3_reg>;
-
-			regulators {
-				/* SW1: +V1.35_VDDIO_DDR */
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v35";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				/* SW2: +V1.05 */
-				vdd2_reg: vdd2 {
-					regulator-name =
-						"vdd_pexa,vdd_pexb,vdd_sata";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				/* SW CTRL: +V1.0_VDD_CPU */
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-				};
-
-				/* SWIO: +V1.8 */
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				/* LDO1: unused */
-
-				/*
-				 * EN_+V3.3 switching via FET:
-				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
-				 */
-				ldo2_reg: ldo2 {
-					regulator-name = "en_3v3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				/* +V1.2_CSI */
-				ldo3_reg: ldo3 {
-					regulator-name =
-						"avdd_dsi_csi,pwrdet_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				/* +V1.2_VDD_RTC */
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V2.8_AVDD_VDAC:
-				 * only required for analog RGB
-				 */
-				ldo5_reg: ldo5 {
-					regulator-name = "avdd_vdac";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
-				 * but LDO6 can't set voltage in 50mV
-				 * granularity
-				 */
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_plle";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				/* +V1.2_AVDD_PLL */
-				ldo7_reg: ldo7 {
-					regulator-name = "avdd_pll";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* +V1.0_VDD_DDR_HS */
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		/* STMPE811 touch screen controller */
-		stmpe811@41 {
-			compatible = "st,stmpe811";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x41>;
-			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-parent = <&gpio>;
-			interrupt-controller;
-			id = <0>;
-			blocks = <0x5>;
-			irq-trigger = <0x1>;
-
-			stmpe_touchscreen {
-				compatible = "st,stmpe-ts";
-				reg = <0>;
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
-				/* 8 sample average control */
-				st,ave-ctrl = <3>;
-				/* 7 length fractional part in z */
-				st,fraction-z = <7>;
-				/*
-				 * 50 mA typical 80 mA max touchscreen drivers
-				 * current limit value
-				 */
-				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
-				/* 1 ms panel driver settling time */
-				st,settling = <3>;
-				/* 5 ms touch detect interrupt delay */
-				st,touch-det-delay = <5>;
-			};
-		};
-
-		/*
-		 * LM95245 temperature sensor
-		 * Note: OVERT_N directly connected to PMIC PWRDN
-		 */
-		temp-sensor@4c {
-			compatible = "national,lm95245";
-			reg = <0x4c>;
-		};
-
-		/* SW: +V1.2_VDD_CORE */
-		tps62362@60 {
-			compatible = "ti,tps62362";
-			reg = <0x60>;
-
-			regulator-name = "tps62362-vout";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
-		};
-	};
-
-	/* SPI4: CAN2 */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <10000000>;
-
-		can@1 {
-			compatible = "microchip,mcp2515";
-			reg = <1>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
-			spi-max-frequency = <10000000>;
-		};
-	};
-
-	/* SPI6: CAN1 */
-	spi@7000de00 {
-		status = "okay";
-		spi-max-frequency = <10000000>;
-
-		can@0 {
-			compatible = "microchip,mcp2515";
-			reg = <0>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-			spi-max-frequency = <10000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clk@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-		clk16m: clk@1 {
-			compatible = "fixed-clock";
-			reg=<1>;
-			#clock-cells = <0>;
-			clock-frequency = <16000000>;
-			clock-output-names = "clk16m";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sys_3v3_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		charge_pump_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra30-beaver.dts b/src/arm/tegra30-beaver.dts
deleted file mode 100644
index cee8f2246fdb..000000000000
--- a/src/arm/tegra30-beaver.dts
+++ /dev/null
@@ -1,522 +0,0 @@
-/dts-v1/;
-
-#include "tegra30.dtsi"
-
-/ {
-	model = "NVIDIA Tegra30 Beaver evaluation board";
-	compatible = "nvidia,beaver", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps65911@2d";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x80000000 0x7ff00000>;
-	};
-
-	pcie-controller@00003000 {
-		status = "okay";
-
-		avdd-pexa-supply = <&ldo1_reg>;
-		vdd-pexa-supply = <&ldo1_reg>;
-		avdd-pexb-supply = <&ldo1_reg>;
-		vdd-pexb-supply = <&ldo1_reg>;
-		avdd-pex-pll-supply = <&ldo1_reg>;
-		avdd-plle-supply = <&ldo1_reg>;
-		vddio-pex-ctl-supply = <&sys_3v3_reg>;
-		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
-
-		pci@1,0 {
-			status = "okay";
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@2,0 {
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@3,0 {
-			status = "okay";
-			nvidia,num-lanes = <2>;
-		};
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
-
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins =	"sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins =	"dap2_fs_pa2",
-						"dap2_sclk_pa3",
-						"dap2_din_pa4",
-						"dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pex_l1_prsnt_n_pdd4 {
-				nvidia,pins =	"pex_l1_prsnt_n_pdd4",
-						"pex_l1_clkreq_n_pdd6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <46>;
-				nvidia,pull-up-strength = <42>;
-				nvidia,slew-rate-rising = <1>;
-				nvidia,slew-rate-falling = <1>;
-			};
-			gpv {
-				nvidia,pins = "drive_gpv";
-				nvidia,pull-up-strength = <16>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	hdmiddc: i2c@7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		rt5640: rt5640@1c {
-			compatible = "realtek,rt5640";
-			reg = <0x1c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
-			realtek,ldo1-en-gpios =
-				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&vdd_5v_in_reg>;
-			vcc2-supply = <&vdd_5v_in_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&vdd_5v_in_reg>;
-			vcc5-supply = <&vdd_5v_in_reg>;
-			vcc6-supply = <&vdd2_reg>;
-			vcc7-supply = <&vdd_5v_in_reg>;
-			vccio-supply = <&vdd_5v_in_reg>;
-
-			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				vdd2_reg: vdd2 {
-					regulator-name = "vdd_1v5_gen";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-				};
-
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					regulator-name = "vdd_pexa,vdd_pexb";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo2_reg: ldo2 {
-					regulator-name = "vdd_sata,avdd_plle";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				/* LDO3 is not connected to anything */
-
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					regulator-name = "vddio_sdmmc,avdd_vdac";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo7_reg: ldo7 {
-					regulator-name = "vdd_pllm,x,u,a_p_c_s";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps62361@60 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-	};
-
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@1 {
-			compatible = "winbond,w25q32";
-			reg = <1>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		status = "okay";
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <200>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	ahub@70080000 {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000000 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	phy2: usb-phy@7d004000 {
-		vbus-supply = <&sys_3v3_reg>;
-		status = "okay";
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		vbus-supply = <&usb3_vbus_reg>;
-		status = "okay";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		gpled1 {
-			label = "LED1"; /* CR5A1 (blue) */
-			gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
-		};
-		gpled2 {
-			label = "LED2"; /* CR4A2 (green) */
-			gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v_in_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v_in";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		chargepump_5v_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "chargepump_5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		ddr_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		vdd_5v_sata_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_5v_sata";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		usb1_vbus_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		usb3_vbus_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		sys_3v3_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "sys_3v3,vdd_3v3_alw";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		sys_3v3_pexs_reg: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "sys_3v3_pexs";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_5v0_hdmi: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+VDD_5V_HDMI";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&sys_3v3_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-rt5640-beaver",
-			     "nvidia,tegra-audio-rt5640";
-		nvidia,model = "NVIDIA Tegra Beaver";
-
-		nvidia,audio-routing =
-			"Headphones", "HPOR",
-			"Headphones", "HPOL",
-			"Mic Jack", "MICBIAS1",
-			"IN2P", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5640>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
-			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra30-cardhu-a02.dts b/src/arm/tegra30-cardhu-a02.dts
deleted file mode 100644
index c9bfedcca6ed..000000000000
--- a/src/arm/tegra30-cardhu-a02.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-/dts-v1/;
-
-#include "tegra30-cardhu.dtsi"
-
-/* This dts file support the cardhu A02 version of board */
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
-	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
-
-	sdhci@78000400 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ddr_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vdd_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "sys_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1_vbus_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		usb3_vbus_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		vdd_5v0_reg: regulator@104 {
-			compatible = "regulator-fixed";
-			reg = <104>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		vdd_bl_reg: regulator@105 {
-			compatible = "regulator-fixed";
-			reg = <105>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
diff --git a/src/arm/tegra30-cardhu-a04.dts b/src/arm/tegra30-cardhu-a04.dts
deleted file mode 100644
index fadf55e46b2b..000000000000
--- a/src/arm/tegra30-cardhu-a04.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-/dts-v1/;
-
-#include "tegra30-cardhu.dtsi"
-
-/* This dts file support the cardhu A04 and later versions of board */
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
-	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
-
-	sdhci@78000400 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ddr_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			regulator-name = "ddr";
-			reg = <100>;
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "sys_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1_vbus_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		usb3_vbus_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		vdd_5v0_reg: regulator@104 {
-			compatible = "regulator-fixed";
-			reg = <104>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		vdd_bl_reg: regulator@105 {
-			compatible = "regulator-fixed";
-			reg = <105>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		vdd_bl2_reg: regulator@106 {
-			compatible = "regulator-fixed";
-			reg = <106>;
-			regulator-name = "vdd_bl2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/tegra30-cardhu.dtsi b/src/arm/tegra30-cardhu.dtsi
deleted file mode 100644
index 206379546244..000000000000
--- a/src/arm/tegra30-cardhu.dtsi
+++ /dev/null
@@ -1,616 +0,0 @@
-#include "tegra30.dtsi"
-
-/**
- * This file contains common DT entry for all fab version of Cardhu.
- * There is multiple fab version of Cardhu starting from A01 to A07.
- * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
- * A02 will have different sets of GPIOs for fixed regulator compare to
- * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
- * compatible with fab version A04. Based on Cardhu fab version, the
- * related dts file need to be chosen like for Cardhu fab version A02,
- * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
- * tegra30-cardhu-a04.dts.
- * The identification of board is done in two ways, by looking the sticker
- * on PCB and by reading board id eeprom.
- * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
- * number is the fab version like here it is 002 and hence fab version A02.
- * The (downstream internal) U-Boot of Cardhu display the board-id as
- * follows:
- * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
- * In this Fab version is 02 i.e. A02.
- * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
- * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
- * wide.
- */
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu evaluation board";
-	compatible = "nvidia,cardhu", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps65911@2d";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	pcie-controller@00003000 {
-		status = "okay";
-
-		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
-		avdd-pexb-supply = <&ldo1_reg>;
-		vdd-pexb-supply = <&ldo1_reg>;
-		avdd-pex-pll-supply = <&ldo1_reg>;
-		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
-		vddio-pex-ctl-supply = <&sys_3v3_reg>;
-		avdd-plle-supply = <&ldo2_reg>;
-
-		pci@1,0 {
-			nvidia,num-lanes = <4>;
-		};
-
-		pci@2,0 {
-			nvidia,num-lanes = <1>;
-		};
-
-		pci@3,0 {
-			status = "okay";
-			nvidia,num-lanes = <1>;
-		};
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins =	"sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins =	"dap2_fs_pa2",
-						"dap2_sclk_pa3",
-						"dap2_din_pa4",
-						"dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <46>;
-				nvidia,pull-up-strength = <42>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
-			};
-			uart3_txd_pw6 {
-				nvidia,pins =	"uart3_txd_pw6",
-						"uart3_cts_n_pa1",
-						"uart3_rts_n_pc0",
-						"uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	panelddc: i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		/* ALS and Proximity sensor */
-		isl29028@44 {
-			compatible = "isil,isl29028";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		i2cmux@70 {
-			compatible = "nxp,pca9546";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x70>;
-		};
-	};
-
-	i2c@7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&vdd_ac_bat_reg>;
-			vcc2-supply = <&vdd_ac_bat_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&vdd_5v0_reg>;
-			vcc5-supply = <&vdd_ac_bat_reg>;
-			vcc6-supply = <&vdd2_reg>;
-			vcc7-supply = <&vdd_ac_bat_reg>;
-			vccio-supply = <&vdd_ac_bat_reg>;
-
-			regulators {
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				vdd2_reg: vdd2 {
-					regulator-name = "vdd_1v5_gen";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-				};
-
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					regulator-name = "vdd_pexa,vdd_pexb";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo2_reg: ldo2 {
-					regulator-name = "vdd_sata,avdd_plle";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				/* LDO3 is not connected to anything */
-
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					regulator-name = "vddio_sdmmc,avdd_vdac";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo7_reg: ldo7 {
-					regulator-name = "vdd_pllm,x,u,a_p_c_s";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&sys_3v3_reg>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		tps62361@60 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-	};
-
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@1 {
-			compatible = "winbond,w25q32";
-			reg = <1>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		status = "okay";
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <200>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	ahub@70080000 {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000000 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		vbus-supply = <&usb3_vbus_reg>;
-		status = "okay";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	panel: panel {
-		compatible = "chunghwa,claa101wb01", "simple-panel";
-		ddc-i2c-bus = <&panelddc>;
-
-		power-supply = <&vdd_pnl1_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_ac_bat_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		cam_1v8_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "cam_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vio_reg>;
-		};
-
-		cp_5v_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "cp_5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		emmc_3v3_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "emmc_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		modem_3v3_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "modem_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
-		};
-
-		pex_hvdd_3v3_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "pex_hvdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_cam1_ldo_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd_cam1_ldo";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_cam2_ldo_reg: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "vdd_cam2_ldo";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_cam3_ldo_reg: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "vdd_cam3_ldo";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_com_reg: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "vdd_com";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_fuse_3v3_reg: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "vdd_fuse_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_pnl1_reg: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "vdd_pnl1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_vid_reg: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "vddio_vid";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-cardhu",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Cardhu";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
-			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra30-colibri-eval-v3.dts b/src/arm/tegra30-colibri-eval-v3.dts
deleted file mode 100644
index 7793abd5bef1..000000000000
--- a/src/arm/tegra30-colibri-eval-v3.dts
+++ /dev/null
@@ -1,205 +0,0 @@
-/dts-v1/;
-
-#include "tegra30-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri T30 on Colibri Evaluation Board";
-	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000c000/rtc@68";
-		rtc1 = "/i2c@7000d000/tps65911@2d";
-		rtc2 = "/rtc@7000e000";
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-				nvidia,panel = <&panel>;
-			};
-		};
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	serial@70006300 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	/*
-	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
-	 * board)
-	 */
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		/* M41T0M6 real time clock on carrier board */
-		rtc@68 {
-			compatible = "stm,m41t00";
-			reg = <0x68>;
-		};
-	};
-
-	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
-	hdmiddc: i2c@7000c700 {
-		status = "okay";
-	};
-
-	/* SPI1: Colibri SSP */
-	spi@7000d400 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		can0: can@0 {
-			compatible = "microchip,mcp2515";
-			reg = <0>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
-			spi-max-frequency = <10000000>;
-		};
-		spidev0: spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <25000000>;
-		};
-	};
-
-	sdhci@78000200 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
-		no-1-8-v;
-	};
-
-	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		dr_mode = "otg";
-		vbus-supply = <&usbc_vbus_reg>;
-	};
-
-	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		/* PWM<A> */
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <255 128 64 32 16 8 4 0>;
-		default-brightness-level = <6>;
-		/* BL_ON */
-		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-		clk16m: clk@1 {
-			compatible = "fixed-clock";
-			reg=<1>;
-			#clock-cells = <0>;
-			clock-frequency = <16000000>;
-			clock-output-names = "clk16m";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu", "simple-panel";
-
-		backlight = <&backlight>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pwmb {
-			label = "PWM<B>";
-			pwms = <&pwm 1 19600>;
-			max-brightness = <255>;
-		};
-		pwmc {
-			label = "PWM<C>";
-			pwms = <&pwm 2 19600>;
-			max-brightness = <255>;
-		};
-		pwmd {
-			label = "PWM<D>";
-			pwms = <&pwm 3 19600>;
-			max-brightness = <255>;
-		};
-	};
-
-	regulators {
-		sys_5v0_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		usbc_vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usbc_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&sys_5v0_reg>;
-		};
-
-		/* USBH_PEN */
-		usbh_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-			vin-supply = <&sys_5v0_reg>;
-		};
-	};
-};
diff --git a/src/arm/tegra30-colibri.dtsi b/src/arm/tegra30-colibri.dtsi
deleted file mode 100644
index c4ed1bec4d92..000000000000
--- a/src/arm/tegra30-colibri.dtsi
+++ /dev/null
@@ -1,386 +0,0 @@
-#include <dt-bindings/input/input.h>
-#include "tegra30.dtsi"
-
-/*
- * Toradex Colibri T30 Device Tree
- * Compatible for Revisions 1.1B/1.1C/1.1D
- */
-/ {
-	model = "Toradex Colibri T30";
-	compatible = "toradex,colibri_t30", "nvidia,tegra30";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
-
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			/* Colibri BL_ON */
-			pv2 {
-				nvidia,pins = "pv2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri Backlight PWM<A> */
-			sdmmc3_dat3_pb4 {
-				nvidia,pins =	"sdmmc3_dat3_pb4";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri CAN_INT */
-			kb_row8_ps0 {
-				nvidia,pins = "kb_row8_ps0";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/*
-			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
-			 * todays display need DE, disable LCD_M1
-			 */
-			lcd_m1_pw1 {
-				nvidia,pins = "lcd_m1_pw1";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Thermal alert, need to be disabled */
-			lcd_dc1_pd2 {
-				nvidia,pins = "lcd_dc1_pd2";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Colibri MMC */
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "sdmmc2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row11_ps3 {
-				nvidia,pins =	"kb_row11_ps3",
-						"kb_row12_ps4",
-						"kb_row13_ps5",
-						"kb_row14_ps6",
-						"kb_row15_ps7";
-				nvidia,function = "sdmmc2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri SSP */
-			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_dat6_pd3 {
-				nvidia,pins =	"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
-				nvidia,function = "spdif";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Colibri UART_A */
-			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri UART_B */
-			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri UART_C */
-			uart2_rxd {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* eMMC */
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	hdmiddc: i2c@7000c700 {
-		clock-frequency = <100000>;
-	};
-
-	/*
-	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
-	 * touch screen controller
-	 */
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&sys_3v3_reg>;
-			vcc2-supply = <&sys_3v3_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&sys_3v3_reg>;
-			vcc5-supply = <&sys_3v3_reg>;
-			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&charge_pump_5v0_reg>;
-			vccio-supply = <&sys_3v3_reg>;
-
-			regulators {
-				/* SW1: +V1.35_VDDIO_DDR */
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v35";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				/* SW2: unused */
-
-				/* SW CTRL: +V1.0_VDD_CPU */
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-				};
-
-				/* SWIO: +V1.8 */
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				/* LDO1: unused */
-
-				/*
-				 * EN_+V3.3 switching via FET:
-				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
-				 */
-				ldo2_reg: ldo2 {
-					regulator-name = "en_3v3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				/* LDO3: unused */
-
-				/* +V1.2_VDD_RTC */
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V2.8_AVDD_VDAC:
-				 * only required for analog RGB
-				 */
-				ldo5_reg: ldo5 {
-					regulator-name = "avdd_vdac";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
-				 * but LDO6 can't set voltage in 50mV
-				 * granularity
-				 */
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_plle";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				/* +V1.2_AVDD_PLL */
-				ldo7_reg: ldo7 {
-					regulator-name = "avdd_pll";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* +V1.0_VDD_DDR_HS */
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		/*
-		 * LM95245 temperature sensor
-		 * Note: OVERT_N directly connected to PMIC PWRDN
-		 */
-		temp-sensor@4c {
-			compatible = "national,lm95245";
-			reg = <0x4c>;
-		};
-
-		/* SW: +V1.2_VDD_CORE */
-		tps62362@60 {
-			compatible = "ti,tps62362";
-			reg = <0x60>;
-
-			regulator-name = "tps62362-vout";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	emmc: sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	/* EHCI instance 1: USB2_DP/N -> AX88772B */
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@7d004000 {
-		status = "okay";
-		nvidia,is-wired = <1>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clk@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sys_3v3_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		charge_pump_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra30.dtsi b/src/arm/tegra30.dtsi
deleted file mode 100644
index 6b35c29278d7..000000000000
--- a/src/arm/tegra30.dtsi
+++ /dev/null
@@ -1,918 +0,0 @@
-#include <dt-bindings/clock/tegra30-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra30";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
-	pcie-controller@00003000 {
-		compatible = "nvidia,tegra30-pcie";
-		device_type = "pci";
-		reg = <0x00003000 0x00000800   /* PADS registers */
-		       0x00003800 0x00000200   /* AFI registers */
-		       0x10000000 0x10000000>; /* configuration space */
-		reg-names = "pads", "afi", "cs";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
-			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
-		interrupt-names = "intr", "msi";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
-		bus-range = <0x00 0xff>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
-			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
-			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
-
-		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
-			 <&tegra_car TEGRA30_CLK_AFI>,
-			 <&tegra_car TEGRA30_CLK_PLL_E>,
-			 <&tegra_car TEGRA30_CLK_CML0>;
-		clock-names = "pex", "afi", "pll_e", "cml";
-		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
-		reset-names = "pex", "afi", "pcie_x";
-		status = "disabled";
-
-		pci@1,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
-			reg = <0x000800 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@2,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
-			reg = <0x001000 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@3,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
-			reg = <0x001800 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-	};
-
-	host1x@50000000 {
-		compatible = "nvidia,tegra30-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe@54040000 {
-			compatible = "nvidia,tegra30-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-		};
-
-		vi@54080000 {
-			compatible = "nvidia,tegra30-vi";
-			reg = <0x54080000 0x00040000>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_VI>;
-			resets = <&tegra_car 20>;
-			reset-names = "vi";
-		};
-
-		epp@540c0000 {
-			compatible = "nvidia,tegra30-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-		};
-
-		isp@54100000 {
-			compatible = "nvidia,tegra30-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d@54140000 {
-			compatible = "nvidia,tegra30-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d@54180000 {
-			compatible = "nvidia,tegra30-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_GR3D
-				  &tegra_car TEGRA30_CLK_GR3D2>;
-			clock-names = "3d", "3d2";
-			resets = <&tegra_car 24>,
-			         <&tegra_car 98>;
-			reset-names = "3d", "3d2";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
-				 <&tegra_car TEGRA30_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra30-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_DISP2>,
-				 <&tegra_car TEGRA30_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi@54280000 {
-			compatible = "nvidia,tegra30-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_HDMI>,
-				 <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		tvo@542c0000 {
-			compatible = "nvidia,tegra30-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_TVO>;
-			status = "disabled";
-		};
-
-		dsi@54300000 {
-			compatible = "nvidia,tegra30-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_DSIA>;
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-		};
-	};
-
-	timer@50004600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x50040600 0x20>;
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clocks = <&tegra_car TEGRA30_CLK_TWD>;
-	};
-
-	intc: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a9-gic";
-		reg = <0x50041000 0x1000
-		       0x50040100 0x0100>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	cache-controller@50043000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x50043000 0x1000>;
-		arm,data-latency = <6 6 2>;
-		arm,tag-latency = <5 5 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	timer@60005000 {
-		compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
-		reg = <0x60005000 0x400>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_TIMER>;
-	};
-
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra30-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
-		reg = <0x6000a000 0x1400>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	ahb: ahb@6000c004 {
-		compatible = "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra30-gpio";
-		reg = <0x6000d000 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
-	};
-
-	pinmux: pinmux@70000868 {
-		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd4    /* Pad control registers */
-		       0x70003000 0x3e4>; /* Mux registers */
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
-	 * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
-	 */
-	uarta: serial@70006000 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartb: serial@70006040 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartc: serial@70006200 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartd: serial@70006300 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uarte: serial@70006400 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006400 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA30_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	rtc@7000e000 {
-		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_RTC>;
-	};
-
-	i2c@7000c000 {
-		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C1>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c400 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c400 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C2>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c500 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C3>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c700 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c700 0x100>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C4>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		resets = <&tegra_car 103>;
-		reset-names = "i2c";
-		clock-names = "div-clk", "fast-clk";
-		dmas = <&apbdma 26>, <&apbdma 26>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000d000 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000d000 0x100>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C5>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d400 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d400 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC1>;
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d600 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d600 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC2>;
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d800 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d800 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC3>;
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000da00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000da00 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC4>;
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000dc00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000dc00 0x200>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC5>;
-		resets = <&tegra_car 104>;
-		reset-names = "spi";
-		dmas = <&apbdma 27>, <&apbdma 27>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000de00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000de00 0x200>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC6>;
-		resets = <&tegra_car 106>;
-		reset-names = "spi";
-		dmas = <&apbdma 28>, <&apbdma 28>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	kbc@7000e200 {
-		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
-		reg = <0x7000e200 0x100>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_KBC>;
-		resets = <&tegra_car 36>;
-		reset-names = "kbc";
-		status = "disabled";
-	};
-
-	pmc@7000e400 {
-		compatible = "nvidia,tegra30-pmc";
-		reg = <0x7000e400 0x400>;
-		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	memory-controller@7000f000 {
-		compatible = "nvidia,tegra30-mc";
-		reg = <0x7000f000 0x010
-		       0x7000f03c 0x1b4
-		       0x7000f200 0x028
-		       0x7000f284 0x17c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	iommu@7000f010 {
-		compatible = "nvidia,tegra30-smmu";
-		reg = <0x7000f010 0x02c
-		       0x7000f1f0 0x010
-		       0x7000f228 0x05c>;
-		nvidia,#asids = <4>;		/* # of ASIDs */
-		dma-window = <0 0x40000000>;	/* IOVA start & length */
-		nvidia,ahb = <&ahb>;
-	};
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra30-efuse";
-		reg = <0x7000f800 0x400>;
-		clocks = <&tegra_car TEGRA30_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	ahub@70080000 {
-		compatible = "nvidia,tegra30-ahub";
-		reg = <0x70080000 0x200
-		       0x70080200 0x100>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
-			 <&tegra_car TEGRA30_CLK_APBIF>;
-		clock-names = "d_audio", "apbif";
-		resets = <&tegra_car 106>, /* d_audio */
-			 <&tegra_car 107>, /* apbif */
-			 <&tegra_car 30>,  /* i2s0 */
-			 <&tegra_car 11>,  /* i2s1 */
-			 <&tegra_car 18>,  /* i2s2 */
-			 <&tegra_car 101>, /* i2s3 */
-			 <&tegra_car 102>, /* i2s4 */
-			 <&tegra_car 108>, /* dam0 */
-			 <&tegra_car 109>, /* dam1 */
-			 <&tegra_car 110>, /* dam2 */
-			 <&tegra_car 10>;  /* spdif */
-		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
-			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
-			      "spdif";
-		dmas = <&apbdma 1>, <&apbdma 1>,
-		       <&apbdma 2>, <&apbdma 2>,
-		       <&apbdma 3>, <&apbdma 3>,
-		       <&apbdma 4>, <&apbdma 4>;
-		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
-			    "rx3", "tx3";
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		tegra_i2s0: i2s@70080300 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080300 0x100>;
-			nvidia,ahub-cif-ids = <4 4>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S0>;
-			resets = <&tegra_car 30>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s1: i2s@70080400 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080400 0x100>;
-			nvidia,ahub-cif-ids = <5 5>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S1>;
-			resets = <&tegra_car 11>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s2: i2s@70080500 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080500 0x100>;
-			nvidia,ahub-cif-ids = <6 6>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S2>;
-			resets = <&tegra_car 18>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s3: i2s@70080600 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080600 0x100>;
-			nvidia,ahub-cif-ids = <7 7>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S3>;
-			resets = <&tegra_car 101>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s4: i2s@70080700 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080700 0x100>;
-			nvidia,ahub-cif-ids = <8 8>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S4>;
-			resets = <&tegra_car 102>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-	};
-
-	sdhci@78000000 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000000 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000200 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000200 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000400 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000400 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000600 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000600 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d000000 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,needs-double-reset;
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@7d000000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USBD>,
-			 <&tegra_car TEGRA30_CLK_PLL_U>,
-			 <&tegra_car TEGRA30_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <1>;
-		nvidia,xcvr-lsrslew = <1>;
-		nvidia,xcvr-hsslew = <32>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@7d004000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d004000 0x4000>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB2>;
-		resets = <&tegra_car 58>;
-		reset-names = "usb";
-		nvidia,phy = <&phy2>;
-		status = "disabled";
-	};
-
-	phy2: usb-phy@7d004000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB2>,
-			 <&tegra_car TEGRA30_CLK_PLL_U>,
-			 <&tegra_car TEGRA30_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		nvidia,xcvr-hsslew = <32>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		status = "disabled";
-	};
-
-	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d008000 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@7d008000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB3>,
-			 <&tegra_car TEGRA30_CLK_PLL_U>,
-			 <&tegra_car TEGRA30_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		nvidia,xcvr-hsslew = <32>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/src/arm/tps6507x.dtsi b/src/arm/tps6507x.dtsi
deleted file mode 100644
index 4c326e591e5a..000000000000
--- a/src/arm/tps6507x.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65070.pdf
- */
-
-&tps {
-	compatible = "ti,tps6507x";
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdcdc1_reg: regulator@0 {
-			reg = <0>;
-			regulator-compatible = "VDCDC1";
-		};
-
-		vdcdc2_reg: regulator@1 {
-			reg = <1>;
-			regulator-compatible = "VDCDC2";
-		};
-
-		vdcdc3_reg: regulator@2 {
-			reg = <2>;
-			regulator-compatible = "VDCDC3";
-		};
-
-		ldo1_reg: regulator@3 {
-			reg = <3>;
-			regulator-compatible = "LDO1";
-		};
-
-		ldo2_reg: regulator@4 {
-			reg = <4>;
-			regulator-compatible = "LDO2";
-		};
-
-	};
-};
diff --git a/src/arm/tps65217.dtsi b/src/arm/tps65217.dtsi
deleted file mode 100644
index a63272422d76..000000000000
--- a/src/arm/tps65217.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65217.pdf
- */
-
-&tps {
-	compatible = "ti,tps65217";
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dcdc1_reg: regulator@0 {
-			reg = <0>;
-			regulator-compatible = "dcdc1";
-		};
-
-		dcdc2_reg: regulator@1 {
-			reg = <1>;
-			regulator-compatible = "dcdc2";
-		};
-
-		dcdc3_reg: regulator@2 {
-			reg = <2>;
-			regulator-compatible = "dcdc3";
-		};
-
-		ldo1_reg: regulator@3 {
-			reg = <3>;
-			regulator-compatible = "ldo1";
-		};
-
-		ldo2_reg: regulator@4 {
-			reg = <4>;
-			regulator-compatible = "ldo2";
-		};
-
-		ldo3_reg: regulator@5 {
-			reg = <5>;
-			regulator-compatible = "ldo3";
-		};
-
-		ldo4_reg: regulator@6 {
-			reg = <6>;
-			regulator-compatible = "ldo4";
-		};
-	};
-};
diff --git a/src/arm/tps65910.dtsi b/src/arm/tps65910.dtsi
deleted file mode 100644
index b0ac6657a170..000000000000
--- a/src/arm/tps65910.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65910.pdf
- */
-
-&tps {
-	compatible = "ti,tps65910";
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vrtc_reg: regulator@0 {
-			reg = <0>;
-			regulator-compatible = "vrtc";
-		};
-
-		vio_reg: regulator@1 {
-			reg = <1>;
-			regulator-compatible = "vio";
-		};
-
-		vdd1_reg: regulator@2 {
-			reg = <2>;
-			regulator-compatible = "vdd1";
-		};
-
-		vdd2_reg: regulator@3 {
-			reg = <3>;
-			regulator-compatible = "vdd2";
-		};
-
-		vdd3_reg: regulator@4 {
-			reg = <4>;
-			regulator-compatible = "vdd3";
-		};
-
-		vdig1_reg: regulator@5 {
-			reg = <5>;
-			regulator-compatible = "vdig1";
-		};
-
-		vdig2_reg: regulator@6 {
-			reg = <6>;
-			regulator-compatible = "vdig2";
-		};
-
-		vpll_reg: regulator@7 {
-			reg = <7>;
-			regulator-compatible = "vpll";
-		};
-
-		vdac_reg: regulator@8 {
-			reg = <8>;
-			regulator-compatible = "vdac";
-		};
-
-		vaux1_reg: regulator@9 {
-			reg = <9>;
-			regulator-compatible = "vaux1";
-		};
-
-		vaux2_reg: regulator@10 {
-			reg = <10>;
-			regulator-compatible = "vaux2";
-		};
-
-		vaux33_reg: regulator@11 {
-			reg = <11>;
-			regulator-compatible = "vaux33";
-		};
-
-		vmmc_reg: regulator@12 {
-			reg = <12>;
-			regulator-compatible = "vmmc";
-		};
-
-		vbb_reg: regulator@13 {
-			reg = <13>;
-			regulator-compatible = "vbb";
-		};
-	};
-};
diff --git a/src/arm/twl4030.dtsi b/src/arm/twl4030.dtsi
deleted file mode 100644
index 36ae9160b558..000000000000
--- a/src/arm/twl4030.dtsi
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- */
-&twl {
-	compatible = "ti,twl4030";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	rtc {
-		compatible = "ti,twl4030-rtc";
-		interrupts = <11>;
-	};
-
-	charger: bci {
-		compatible = "ti,twl4030-bci";
-		interrupts = <9>, <2>;
-		bci3v1-supply = <&vusb3v1>;
-	};
-
-	watchdog {
-		compatible = "ti,twl4030-wdt";
-	};
-
-	vaux1: regulator-vaux1 {
-		compatible = "ti,twl4030-vaux1";
-	};
-
-	vaux2: regulator-vaux2 {
-		compatible = "ti,twl4030-vaux2";
-	};
-
-	vaux3: regulator-vaux3 {
-		compatible = "ti,twl4030-vaux3";
-	};
-
-	vaux4: regulator-vaux4 {
-		compatible = "ti,twl4030-vaux4";
-	};
-
-	vcc: regulator-vdd1 {
-		compatible = "ti,twl4030-vdd1";
-		regulator-min-microvolt = <600000>;
-		regulator-max-microvolt = <1450000>;
-	};
-
-	vdac: regulator-vdac {
-		compatible = "ti,twl4030-vdac";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vio: regulator-vio {
-		compatible = "ti,twl4030-vio";
-	};
-
-	vintana1: regulator-vintana1 {
-		compatible = "ti,twl4030-vintana1";
-	};
-
-	vintana2: regulator-vintana2 {
-		compatible = "ti,twl4030-vintana2";
-	};
-
-	vintdig: regulator-vintdig {
-		compatible = "ti,twl4030-vintdig";
-	};
-
-	vmmc1: regulator-vmmc1 {
-		compatible = "ti,twl4030-vmmc1";
-		regulator-min-microvolt = <1850000>;
-		regulator-max-microvolt = <3150000>;
-	};
-
-	vmmc2: regulator-vmmc2 {
-		compatible = "ti,twl4030-vmmc2";
-		regulator-min-microvolt = <1850000>;
-		regulator-max-microvolt = <3150000>;
-	};
-
-	vusb1v5: regulator-vusb1v5 {
-		compatible = "ti,twl4030-vusb1v5";
-	};
-
-	vusb1v8: regulator-vusb1v8 {
-		compatible = "ti,twl4030-vusb1v8";
-	};
-
-	vusb3v1: regulator-vusb3v1 {
-		compatible = "ti,twl4030-vusb3v1";
-	};
-
-	vpll1: regulator-vpll1 {
-		compatible = "ti,twl4030-vpll1";
-	};
-
-	vpll2: regulator-vpll2 {
-		compatible = "ti,twl4030-vpll2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vsim: regulator-vsim {
-		compatible = "ti,twl4030-vsim";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	twl_gpio: gpio {
-		compatible = "ti,twl4030-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	usb2_phy: twl4030-usb {
-		compatible = "ti,twl4030-usb";
-		interrupts = <10>, <4>;
-		usb1v5-supply = <&vusb1v5>;
-		usb1v8-supply = <&vusb1v8>;
-		usb3v1-supply = <&vusb3v1>;
-		usb_mode = <1>;
-		#phy-cells = <0>;
-	};
-
-	twl_pwm: pwm {
-		compatible = "ti,twl4030-pwm";
-		#pwm-cells = <2>;
-	};
-
-	twl_pwmled: pwmled {
-		compatible = "ti,twl4030-pwmled";
-		#pwm-cells = <2>;
-	};
-
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-
-	twl_keypad: keypad {
-		compatible = "ti,twl4030-keypad";
-		interrupts = <1>;
-		keypad,num-rows = <8>;
-		keypad,num-columns = <8>;
-	};
-
-	twl_madc: madc {
-		compatible = "ti,twl4030-madc";
-		interrupts = <3>;
-		#io-channel-cells = <1>;
-	};
-};
diff --git a/src/arm/twl4030_omap3.dtsi b/src/arm/twl4030_omap3.dtsi
deleted file mode 100644
index 3537ae5b2146..000000000000
--- a/src/arm/twl4030_omap3.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2013 Linaro, Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&twl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
-};
-
-&omap3_pmx_core {
-	/*
-	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
-	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
-	 * defaults for the SYS_NIRQ pin here.
-	 */
-	twl4030_pins: pinmux_twl4030_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
-		>;
-	};
-};
-
-/*
- * If your board is not using the I2C4 pins with twl4030, then don't include
- * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
- * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
- * sys_nvmode2 signaling.
- */
-&omap3_pmx_wkup {
-	twl4030_vpins: pinmux_twl4030_vpins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)		/* i2c4_scl.i2c4_scl */
-			OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)		/* i2c4_sda.i2c4_sda */
-			OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0)	/* sys_clkreq.sys_clkreq */
-			OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0)	/* sys_off_mode.sys_off_mode */
-		>;
-	};
-};
diff --git a/src/arm/twl6030.dtsi b/src/arm/twl6030.dtsi
deleted file mode 100644
index 2e3bd3172b23..000000000000
--- a/src/arm/twl6030.dtsi
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
- */
-&twl {
-	compatible = "ti,twl6030";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	rtc {
-		compatible = "ti,twl4030-rtc";
-		interrupts = <11>;
-	};
-
-	vaux1: regulator-vaux1 {
-		compatible = "ti,twl6030-vaux1";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	vaux2: regulator-vaux2 {
-		compatible = "ti,twl6030-vaux2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <2800000>;
-	};
-
-	vaux3: regulator-vaux3 {
-		compatible = "ti,twl6030-vaux3";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	vmmc: regulator-vmmc {
-		compatible = "ti,twl6030-vmmc";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	vpp: regulator-vpp {
-		compatible = "ti,twl6030-vpp";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	vusim: regulator-vusim {
-		compatible = "ti,twl6030-vusim";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <2900000>;
-	};
-
-	vdac: regulator-vdac {
-		compatible = "ti,twl6030-vdac";
-	};
-
-	vana: regulator-vana {
-		compatible = "ti,twl6030-vana";
-	};
-
-	vcxio: regulator-vcxio {
-		compatible = "ti,twl6030-vcxio";
-		regulator-always-on;
-	};
-
-	vusb: regulator-vusb {
-		compatible = "ti,twl6030-vusb";
-	};
-
-	v1v8: regulator-v1v8 {
-		compatible = "ti,twl6030-v1v8";
-		regulator-always-on;
-	};
-
-	v2v1: regulator-v2v1 {
-		compatible = "ti,twl6030-v2v1";
-		regulator-always-on;
-	};
-
-	clk32kg: regulator-clk32kg {
-		compatible = "ti,twl6030-clk32kg";
-	};
-
-	twl_usb_comparator: usb-comparator {
-		compatible = "ti,twl6030-usb";
-		interrupts = <4>, <10>;
-	};
-
-	twl_pwm: pwm {
-		/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
-		compatible = "ti,twl6030-pwm";
-		#pwm-cells = <2>;
-	};
-
-	twl_pwmled: pwmled {
-		/* provides one PWM (id 0 for Charging indicator LED) */
-		compatible = "ti,twl6030-pwmled";
-		#pwm-cells = <2>;
-	};
-};
diff --git a/src/arm/twl6030_omap4.dtsi b/src/arm/twl6030_omap4.dtsi
deleted file mode 100644
index a4fa5703c42b..000000000000
--- a/src/arm/twl6030_omap4.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&twl {
-	/*
-	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
-	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
-	 * connected to the fref_clk0_out.sys_drm_msecure line.
-	 * Therefore, configure the defaults for the SYS_NIRQ1 and
-	 * fref_clk0_out.sys_drm_msecure pins here.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&twl6030_pins
-		&twl6030_wkup_pins
-	>;
-};
-
-&omap4_pmx_wkup {
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
-	};
-};
-
-&omap4_pmx_core {
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-};
diff --git a/src/arm/usb_a9g20-dab-mmx.dtsi b/src/arm/usb_a9g20-dab-mmx.dtsi
deleted file mode 100644
index 5b0ffc1a0b24..000000000000
--- a/src/arm/usb_a9g20-dab-mmx.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
- */
-
-/ {
-	ahb {
-		apb {
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-		};
-	};
-
-	i2c-gpio@0 {
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led1 {
-			label = "user_led1";
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-		};
-
-/*
-* led already used by mother board but active as high
-*		user_led2 {
-*			label = "user_led2";
-*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-*		};
-*/
-		user_led3 {
-			label = "user_led3";
-			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
-		};
-
-		user_led4 {
-			label = "user_led4";
-			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
-		};
-
-		red {
-			label = "red";
-			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
-		};
-
-		orange {
-			label = "orange";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-		};
-
-		green {
-			label = "green";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb1 {
-			label = "user_pb1";
-			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-		};
-
-		user_pb2 {
-			label = "user_pb2";
-			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-		};
-
-		user_pb3 {
-			label = "user_pb3";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-		};
-
-		user_pb4 {
-			label = "user_pb4";
-			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-		};
-	};
-};
diff --git a/src/arm/versatile-ab.dts b/src/arm/versatile-ab.dts
deleted file mode 100644
index 27d0d9c8adf3..000000000000
--- a/src/arm/versatile-ab.dts
+++ /dev/null
@@ -1,287 +0,0 @@
-/dts-v1/;
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "ARM Versatile AB";
-	compatible = "arm,versatile-ab";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&vic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		i2c0 = &i2c0;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory {
-		reg = <0x0 0x08000000>;
-	};
-
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	core-module@10000000 {
-		compatible = "arm,core-module-versatile", "syscon";
-		reg = <0x10000000 0x200>;
-
-		/* OSC1 on AB, OSC4 on PB */
-		osc1: cm_aux_osc@24M {
-			#clock-cells = <0>;
-			compatible = "arm,versatile-cm-auxosc";
-			clocks = <&xtal24mhz>;
-		};
-
-		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <24>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-
-		pclk: pclk@24M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-	};
-
-	flash@34000000 {
-		compatible = "arm,versatile-flash";
-		reg = <0x34000000 0x4000000>;
-		bank-width = <4>;
-	};
-
-	i2c0: i2c@10002000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,versatile-i2c";
-		reg = <0x10002000 0x1000>;
-
-		rtc@68 {
-			compatible = "dallas,ds1338";
-			reg = <0x68>;
-		};
-	};
-
-	net@10010000 {
-		compatible = "smsc,lan91c111";
-		reg = <0x10010000 0x10000>;
-		interrupts = <25>;
-	};
-
-	lcd@10008000 {
-		compatible = "arm,versatile-lcd";
-		reg = <0x10008000 0x1000>;
-	};
-
-	amba {
-		compatible = "arm,amba-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vic: intc@10140000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
-			valid-mask = <0xffffffff>;
-		};
-
-		sic: intc@10003000 {
-			compatible = "arm,versatile-sic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10003000 0x1000>;
-			interrupt-parent = <&vic>;
-			interrupts = <31>; /* Cascaded to vic */
-			clear-mask = <0xffffffff>;
-			valid-mask = <0xffc203f8>;
-		};
-
-		dma@10130000 {
-			compatible = "arm,pl081", "arm,primecell";
-			reg = <0x10130000 0x1000>;
-			interrupts = <17>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart0: uart@101f1000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f1000 0x1000>;
-			interrupts = <12>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart1: uart@101f2000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f2000 0x1000>;
-			interrupts = <13>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart2: uart@101f3000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f3000 0x1000>;
-			interrupts = <14>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		smc@10100000 {
-			compatible = "arm,primecell";
-			reg = <0x10100000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		mpmc@10110000 {
-			compatible = "arm,primecell";
-			reg = <0x10110000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		display@10120000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x10120000 0x1000>;
-			interrupts = <16>;
-			clocks = <&osc1>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
-		};
-
-		sctl@101e0000 {
-			compatible = "arm,primecell";
-			reg = <0x101e0000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		watchdog@101e1000 {
-			compatible = "arm,primecell";
-			reg = <0x101e1000 0x1000>;
-			interrupts = <0>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		timer@101e2000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x101e2000 0x1000>;
-			interrupts = <4>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer0", "timer1", "apb_pclk";
-		};
-
-		timer@101e3000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x101e3000 0x1000>;
-			interrupts = <5>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer0", "timer1", "apb_pclk";
-		};
-
-		gpio0: gpio@101e4000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e4000 0x1000>;
-			gpio-controller;
-			interrupts = <6>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@101e5000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e5000 0x1000>;
-			interrupts = <7>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		rtc@101e8000 {
-			compatible = "arm,pl030", "arm,primecell";
-			reg = <0x101e8000 0x1000>;
-			interrupts = <10>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		sci@101f0000 {
-			compatible = "arm,primecell";
-			reg = <0x101f0000 0x1000>;
-			interrupts = <15>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		ssp@101f4000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x101f4000 0x1000>;
-			interrupts = <11>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
-		};
-
-		fpga {
-			compatible = "arm,versatile-fpga", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x10000000 0x10000>;
-
-			aaci@4000 {
-				compatible = "arm,primecell";
-				reg = <0x4000 0x1000>;
-				interrupts = <24>;
-				clocks = <&pclk>;
-				clock-names = "apb_pclk";
-			};
-			mmc@5000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = < 0x5000 0x1000>;
-				interrupts-extended = <&vic 22 &sic 2>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-			kmi@6000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x6000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <3>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-			kmi@7000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x7000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <4>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-		};
-	};
-};
diff --git a/src/arm/versatile-pb.dts b/src/arm/versatile-pb.dts
deleted file mode 100644
index e36c1e82fea7..000000000000
--- a/src/arm/versatile-pb.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-#include <versatile-ab.dts>
-
-/ {
-	model = "ARM Versatile PB";
-	compatible = "arm,versatile-pb";
-
-	amba {
-		gpio2: gpio@101e6000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e6000 0x1000>;
-			interrupts = <8>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio3: gpio@101e7000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e7000 0x1000>;
-			interrupts = <9>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		fpga {
-			uart@9000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x9000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <6>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-			sci@a000 {
-				compatible = "arm,primecell";
-				reg = <0xa000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <5>;
-				clocks = <&xtal24mhz>;
-				clock-names = "apb_pclk";
-			};
-			mmc@b000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0xb000 0x1000>;
-				interrupts-extended = <&vic 23 &sic 2>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-		};
-	};
-};
diff --git a/src/arm/vexpress-v2m-rs1.dtsi b/src/arm/vexpress-v2m-rs1.dtsi
deleted file mode 100644
index 756c986995a3..000000000000
--- a/src/arm/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * original variant (vexpress-v2m.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m.dtsi!
- */
-
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		arm,v2m-memory-map = "rs1";
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <4 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
-
-		psram@1,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <1 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
-
-		vram@2,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <2 0x00000000 0x00800000>;
-		};
-
-		ethernet@2,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
-
-		usb@2,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <2 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
-
-		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
-
-			v2m_sysreg: sysreg@010000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
-
-				v2m_led_gpios: sys_led@08 {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_mmc_gpios: sys_mci@48 {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_flash_gpios: sys_flash@4c {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-
-			v2m_sysctl: sysctl@020000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x020000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-			};
-
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@030000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x030000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
-				};
-			};
-
-			aaci@040000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x040000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			mmci@050000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x050000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-
-			kmi@060000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x060000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			kmi@070000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x070000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			v2m_serial0: uart@090000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			wdt@0f0000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f0000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
-
-			v2m_timer01: timer@110000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x110000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			v2m_timer23: timer@120000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x120000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@160000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x160000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
-				};
-
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
-				};
-			};
-
-			rtc@170000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x170000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			compact-flash@1a0000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a0000 0x100
-				       0x1a0100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f0000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f0000 0x1000>;
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-			};
-		};
-
-		v2m_fixed_3v3: fixedregulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			user@1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			user@2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
-
-			user@3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
-
-			user@4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
-
-			user@5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
-
-			user@6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
-
-			user@7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
-
-			user@8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
-			};
-		};
-
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-			osc@0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
-
-			v2m_oscclk1: osc@1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 63500000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
-
-			v2m_oscclk2: osc@2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
-
-			volt@0 {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
-
-			temp@0 {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
-
-			reset@0 {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
-
-			muxfpga@0 {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
-
-			shutdown@0 {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
-
-			reboot@0 {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
-
-			dvimode@0 {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
-			};
-		};
-	};
diff --git a/src/arm/vexpress-v2m.dtsi b/src/arm/vexpress-v2m.dtsi
deleted file mode 100644
index ba856d604fb7..000000000000
--- a/src/arm/vexpress-v2m.dtsi
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * Original memory map ("Legacy memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m-rs1.dtsi!
- */
-
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <1 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
-
-		psram@2,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <2 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
-
-		vram@3,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <3 0x00000000 0x00800000>;
-		};
-
-		ethernet@3,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <3 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
-
-		usb@3,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <3 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
-
-		iofpga@7,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 7 0 0x20000>;
-
-			v2m_sysreg: sysreg@00000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x00000 0x1000>;
-
-				v2m_led_gpios: sys_led@08 {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_mmc_gpios: sys_mci@48 {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_flash_gpios: sys_flash@4c {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-
-			v2m_sysctl: sysctl@01000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x01000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-			};
-
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@02000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x02000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
-				};
-			};
-
-			aaci@04000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x04000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			mmci@05000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x05000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-
-			kmi@06000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x06000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			kmi@07000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x07000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			v2m_serial0: uart@09000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x09000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			wdt@0f000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
-
-			v2m_timer01: timer@11000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x11000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			v2m_timer23: timer@12000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x12000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@16000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x16000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
-				};
-
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
-				};
-			};
-
-			rtc@17000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x17000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			compact-flash@1a000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a000 0x100
-				       0x1a100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f000 0x1000>;
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-			};
-		};
-
-		v2m_fixed_3v3: fixedregulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			user@1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			user@2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
-
-			user@3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
-
-			user@4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
-
-			user@5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
-
-			user@6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
-
-			user@7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
-
-			user@8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
-			};
-		};
-
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-			osc@0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
-
-			v2m_oscclk1: osc@1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 63500000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
-
-			v2m_oscclk2: osc@2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
-
-			volt@0 {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
-
-			temp@0 {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
-
-			reset@0 {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
-
-			muxfpga@0 {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
-
-			shutdown@0 {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
-
-			reboot@0 {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
-
-			dvimode@0 {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
-			};
-		};
-	};
diff --git a/src/arm/vexpress-v2p-ca15-tc1.dts b/src/arm/vexpress-v2p-ca15-tc1.dts
deleted file mode 100644
index 9420053acc14..000000000000
--- a/src/arm/vexpress-v2p-ca15-tc1.dts
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A15x2 (version with Test Chip 1)
- * Cortex-A15 MPCore (V2P-CA15)
- *
- * HBI-0237A
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA15";
-	arm,hbi = <0x237>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2b0a0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0 0x2b0a0000 0 0x1000>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	wdt@2b060000 {
-		compatible = "arm,sp805", "arm,primecell";
-		status = "disabled";
-		reg = <0 0x2b060000 0 0x1000>;
-		interrupts = <0 98 4>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
-		      <0 0x2c004000 0 0x2000>,
-		      <0 0x2c006000 0 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0 0x7ffd0000 0 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	dma@7ffb0000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0 0x7ffb0000 0 0x1000>;
-		interrupts = <0 92 4>,
-			     <0 88 4>,
-			     <0 89 4>,
-			     <0 90 4>,
-			     <0 91 4>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			/* CPU PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <50000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		osc@4 {
-			/* Multiplexed AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		oscclk5: osc@5 {
-			/* HDLCD PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		smbclk: osc@6 {
-			/* SMB clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 6>;
-			freq-range = <20000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk6";
-		};
-
-		oscclk7: osc@7 {
-			/* SYS PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 7>;
-			freq-range = <20000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk7";
-		};
-
-		osc@8 {
-			/* DDR2 PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 8>;
-			freq-range = <40000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk8";
-		};
-
-		volt@0 {
-			/* CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "Cores";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "Cores";
-		};
-
-		amp@0 {
-			/* Total current for the two cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "Cores";
-		};
-
-		temp@0 {
-			/* DCC internal temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-
-		power@0 {
-			/* Total power */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "Cores";
-		};
-
-		energy@0 {
-			/* Total energy */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>;
-			label = "Cores";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
diff --git a/src/arm/vexpress-v2p-ca15_a7.dts b/src/arm/vexpress-v2p-ca15_a7.dts
deleted file mode 100644
index a25c262326dc..000000000000
--- a/src/arm/vexpress-v2p-ca15_a7.dts
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A15x2 A7x3
- * Cortex-A15_A7 MPCore (V2P-CA15_A7)
- *
- * HBI-0249A
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA15_CA7";
-	arm,hbi = <0x249>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control2>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control2>;
-		};
-
-		cpu4: cpu@4 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control2>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	wdt@2a490000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0 0x2a490000 0 0x1000>;
-		interrupts = <0 98 4>;
-		clocks = <&oscclk6a>, <&oscclk6a>;
-		clock-names = "wdogclk", "apb_pclk";
-	};
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2b0a0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0 0x2b0a0000 0 0x1000>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
-		      <0 0x2c004000 0 0x2000>,
-		      <0 0x2c006000 0 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	cci@2c090000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x10000>;
-
-		cci_control1: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-
-		cci_control2: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0 0x7ffd0000 0 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-	dma@7ff00000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0 0x7ff00000 0 0x1000>;
-		interrupts = <0 92 4>,
-			     <0 88 4>,
-			     <0 89 4>,
-			     <0 90 4>,
-			     <0 91 4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-        scc@7fff0000 {
-		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
-		reg = <0 0x7fff0000 0 0x1000>;
-		interrupts = <0 95 4>;
-        };
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	oscclk6a: oscclk6a {
-		/* Reference 24MHz clock */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "oscclk6a";
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			/* A15 PLL 0 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		osc@1 {
-			/* A15 PLL 1 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk1";
-		};
-
-		osc@2 {
-			/* A7 PLL 0 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk2";
-		};
-
-		osc@3 {
-			/* A7 PLL 1 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 3>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk3";
-		};
-
-		osc@4 {
-			/* External AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		oscclk5: osc@5 {
-			/* HDLCD PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		smbclk: osc@6 {
-			/* Static memory controller clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 6>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk6";
-		};
-
-		osc@7 {
-			/* SYS PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 7>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk7";
-		};
-
-		osc@8 {
-			/* DDR2 PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 8>;
-			freq-range = <20000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk8";
-		};
-
-		volt@0 {
-			/* A15 CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "A15 Vcore";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "A15 Vcore";
-		};
-
-		volt@1 {
-			/* A7 CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 1>;
-			regulator-name = "A7 Vcore";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "A7 Vcore";
-		};
-
-		amp@0 {
-			/* Total current for the two A15 cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "A15 Icore";
-		};
-
-		amp@1 {
-			/* Total current for the three A7 cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 1>;
-			label = "A7 Icore";
-		};
-
-		temp@0 {
-			/* DCC internal temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-
-		power@0 {
-			/* Total power for the two A15 cores */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "A15 Pcore";
-		};
-
-		power@1 {
-			/* Total power for the three A7 cores */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 1>;
-			label = "A7 Pcore";
-		};
-
-		energy@0 {
-			/* Total energy for the two A15 cores */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>, <13 1>;
-			label = "A15 Jcore";
-		};
-
-		energy@2 {
-			/* Total energy for the three A7 cores */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 2>, <13 3>;
-			label = "A7 Jcore";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
diff --git a/src/arm/vexpress-v2p-ca5s.dts b/src/arm/vexpress-v2p-ca5s.dts
deleted file mode 100644
index d2709b73316b..000000000000
--- a/src/arm/vexpress-v2p-ca5s.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A5x2
- * Cortex-A5 MPCore (V2P-CA5s)
- *
- * HBI-0225B
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA5s";
-	arm,hbi = <0x225>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	hdlcd@2a110000 {
-		compatible = "arm,hdlcd";
-		reg = <0x2a110000 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&oscclk3>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2a150000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x2a150000 0x1000>;
-		clocks = <&oscclk1>;
-		clock-names = "apb_pclk";
-	};
-
-	memory-controller@2a190000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x2a190000 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&oscclk1>;
-		clock-names = "apb_pclk";
-	};
-
-	scu@2c000000 {
-		compatible = "arm,cortex-a5-scu";
-		reg = <0x2c000000 0x58>;
-	};
-
-	timer@2c000600 {
-		compatible = "arm,cortex-a5-twd-timer";
-		reg = <0x2c000600 0x20>;
-		interrupts = <1 13 0x304>;
-	};
-
-	timer@2c000200 {
-		compatible = "arm,cortex-a5-global-timer",
-		             "arm,cortex-a9-global-timer";
-		reg = <0x2c000200 0x20>;
-		interrupts = <1 11 0x304>;
-		clocks = <&oscclk0>;
-	};
-
-	watchdog@2c000620 {
-		compatible = "arm,cortex-a5-twd-wdt";
-		reg = <0x2c000620 0x20>;
-		interrupts = <1 14 0x304>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c000100 0x100>;
-	};
-
-	L2: cache-controller@2c0f0000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x2c0f0000 0x1000>;
-		interrupts = <0 84 4>;
-		cache-level = <2>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a5-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		oscclk0: osc@0 {
-			/* CPU and internal AXI reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <50000000 100000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		oscclk1: osc@1 {
-			/* Multiplexed AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <5000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk1";
-		};
-
-		osc@2 {
-			/* DDR2 */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <80000000 120000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk2";
-		};
-
-		oscclk3: osc@3 {
-			/* HDLCD */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 3>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk3";
-		};
-
-		osc@4 {
-			/* Test chip gate configuration */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <80000000 80000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		smbclk: osc@5 {
-			/* SMB clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <25000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		temp@0 {
-			/* DCC internal operating temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x04000000>,
-			 <1 0 0x14000000 0x04000000>,
-			 <2 0 0x18000000 0x04000000>,
-			 <3 0 0x1c000000 0x04000000>,
-			 <4 0 0x0c000000 0x04000000>,
-			 <5 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
diff --git a/src/arm/vexpress-v2p-ca9.dts b/src/arm/vexpress-v2p-ca9.dts
deleted file mode 100644
index 62d9b225dcce..000000000000
--- a/src/arm/vexpress-v2p-ca9.dts
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A9x4
- * Cortex-A9 MPCore (V2P-CA9)
- *
- * HBI-0191B
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA9";
-	arm,hbi = <0x191>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-	};
-
-	memory-controller@100e0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x100e0000 0x1000>;
-		clocks = <&oscclk2>;
-		clock-names = "apb_pclk";
-	};
-
-	memory-controller@100e1000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x100e1000 0x1000>;
-		interrupts = <0 45 4>,
-			     <0 46 4>;
-		clocks = <&oscclk2>;
-		clock-names = "apb_pclk";
-	};
-
-	timer@100e4000 {
-		compatible = "arm,sp804", "arm,primecell";
-		reg = <0x100e4000 0x1000>;
-		interrupts = <0 48 4>,
-			     <0 49 4>;
-		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "timclk", "apb_pclk";
-		status = "disabled";
-	};
-
-	watchdog@100e5000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0x100e5000 0x1000>;
-		interrupts = <0 51 4>;
-		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "wdogclk", "apb_pclk";
-	};
-
-	scu@1e000000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x1e000000 0x58>;
-	};
-
-	timer@1e000600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x1e000600 0x20>;
-		interrupts = <1 13 0xf04>;
-	};
-
-	watchdog@1e000620 {
-		compatible = "arm,cortex-a9-twd-wdt";
-		reg = <0x1e000620 0x20>;
-		interrupts = <1 14 0xf04>;
-	};
-
-	gic: interrupt-controller@1e001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x1e001000 0x1000>,
-		      <0x1e000100 0x100>;
-	};
-
-	L2: cache-controller@1e00a000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x1e00a000 0x1000>;
-		interrupts = <0 43 4>;
-		cache-level = <2>;
-		arm,data-latency = <1 1 1>;
-		arm,tag-latency = <1 1 1>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			/* ACLK clock to the AXI master port on the test chip */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <30000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "extsaxiclk";
-		};
-
-		oscclk1: osc@1 {
-			/* Reference clock for the CLCD */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <10000000 80000000>;
-			#clock-cells = <0>;
-			clock-output-names = "clcdclk";
-		};
-
-		smbclk: oscclk2: osc@2 {
-			/* Reference clock for the test chip internal PLLs */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <33000000 100000000>;
-			#clock-cells = <0>;
-			clock-output-names = "tcrefclk";
-		};
-
-		volt@0 {
-			/* Test Chip internal logic voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "VD10";
-			regulator-always-on;
-			label = "VD10";
-		};
-
-		volt@1 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 1>;
-			regulator-name = "VD10_S2";
-			regulator-always-on;
-			label = "VD10_S2";
-		};
-
-		volt@2 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 2>;
-			regulator-name = "VD10_S3";
-			regulator-always-on;
-			label = "VD10_S3";
-		};
-
-		volt@3 {
-			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 3>;
-			regulator-name = "VCC1V8";
-			regulator-always-on;
-			label = "VCC1V8";
-		};
-
-		volt@4 {
-			/* DDR2 SDRAM VTT termination voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 4>;
-			regulator-name = "DDR2VTT";
-			regulator-always-on;
-			label = "DDR2VTT";
-		};
-
-		volt@5 {
-			/* Local board supply for miscellaneous logic external to the Test Chip */
-			arm,vexpress-sysreg,func = <2 5>;
-			compatible = "arm,vexpress-volt";
-			regulator-name = "VCC3V3";
-			regulator-always-on;
-			label = "VCC3V3";
-		};
-
-		amp@0 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "VD10_S2";
-		};
-
-		amp@1 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 1>;
-			label = "VD10_S3";
-		};
-
-		power@0 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "PVD10_S2";
-		};
-
-		power@1 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 1>;
-			label = "PVD10_S3";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40000000 0x04000000>,
-			 <1 0 0x44000000 0x04000000>,
-			 <2 0 0x48000000 0x04000000>,
-			 <3 0 0x4c000000 0x04000000>,
-			 <7 0 0x10000000 0x00020000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m.dtsi"
-	};
-};
diff --git a/src/arm/vf610-colibri.dts b/src/arm/vf610-colibri.dts
deleted file mode 100644
index aecc7dbc65e8..000000000000
--- a/src/arm/vf610-colibri.dts
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Copyright 2014 Toradex AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "Toradex Colibri VF61 COM";
-	compatible = "toradex,vf610-colibri", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP0,115200";
-	};
-
-	memory {
-		reg = <0x80000000 0x10000000>;
-	};
-
-	clocks {
-		enet_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&L2 {
-	arm,data-latency = <2 1 2>;
-	arm,tag-latency = <3 2 3>;
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&iomuxc {
-	vf610-colibri {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTB20__GPIO_42	0x219d
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_uart0: uart0grp {
-			fsl,pins = <
-				VF610_PAD_PTB10__UART0_TX		0x21a2
-				VF610_PAD_PTB11__UART0_RX		0x21a1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTD0__UART2_TX		0x21a2
-				VF610_PAD_PTD1__UART2_RX		0x21a1
-				VF610_PAD_PTD2__UART2_RTS		0x21a2
-				VF610_PAD_PTD3__UART2_CTS		0x21a1
-			>;
-		};
-	};
-};
diff --git a/src/arm/vf610-cosmic.dts b/src/arm/vf610-cosmic.dts
deleted file mode 100644
index 3fd1b74e1216..000000000000
--- a/src/arm/vf610-cosmic.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- * Copyright 2013 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "PHYTEC Cosmic/Cosmic+ Board";
-	compatible = "phytec,vf610-cosmic", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP1,115200";
-	};
-
-	memory {
-		reg = <0x80000000 0x10000000>;
-	};
-
-	clocks {
-		enet_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&iomuxc {
-	vf610-cosmic {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/src/arm/vf610-pinfunc.h b/src/arm/vf610-pinfunc.h
deleted file mode 100644
index 1ee681f7ce2f..000000000000
--- a/src/arm/vf610-pinfunc.h
+++ /dev/null
@@ -1,810 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_VF610_PINFUNC_H
-#define __DTS_VF610_PINFUNC_H
-
-/*
- * The pin function ID for VF610 is a tuple of:
- * <mux_reg input_reg mux_mode input_val>
- */
-
-#define ALT0	0x0
-#define ALT1	0x1
-#define ALT2	0x2
-#define ALT3	0x3
-#define ALT4	0x4
-#define ALT5	0x5
-#define ALT6	0x6
-#define ALT7	0x7
-
-
-#define VF610_PAD_PTA6__GPIO_0			0x000 0x000 ALT0 0x0
-#define VF610_PAD_PTA6__RMII_CLKOUT		0x000 0x000 ALT1 0x0
-#define VF610_PAD_PTA6__RMII_CLKIN		0x000 0x2F0 ALT2 0x0
-#define VF610_PAD_PTA6__DCU1_TCON11		0x000 0x000 ALT4 0x0
-#define VF610_PAD_PTA6__DCU1_R2			0x000 0x000 ALT7 0x0
-#define VF610_PAD_PTA8__GPIO_1			0x004 0x000 ALT0 0x0
-#define VF610_PAD_PTA8__TCLK			0x004 0x000 ALT1 0x0
-#define VF610_PAD_PTA8__DCU0_R0			0x004 0x000 ALT4 0x0
-#define VF610_PAD_PTA8__MLB_CLK			0x004 0x354 ALT7 0x0
-#define VF610_PAD_PTA9__GPIO_2			0x008 0x000 ALT0 0x0
-#define VF610_PAD_PTA9__TDI			0x008 0x000 ALT1 0x0
-#define VF610_PAD_PTA9__RMII_CLKOUT		0x008 0x000 ALT2 0x0
-#define VF610_PAD_PTA9__RMII_CLKIN		0x008 0x2F0 ALT3 0x1
-#define VF610_PAD_PTA9__DCU0_R1			0x008 0x000 ALT4 0x0
-#define VF610_PAD_PTA9__WDOG_B			0x008 0x000 ALT6 0x0
-#define VF610_PAD_PTA10__GPIO_3			0x00C 0x000 ALT0 0x0
-#define VF610_PAD_PTA10__TDO			0x00C 0x000 ALT1 0x0
-#define VF610_PAD_PTA10__EXT_AUDIO_MCLK		0x00C 0x2EC ALT2 0x0
-#define VF610_PAD_PTA10__DCU0_G0		0x00C 0x000 ALT4 0x0
-#define VF610_PAD_PTA10__ENET_TS_CLKIN		0x00C 0x2F4 ALT6 0x0
-#define VF610_PAD_PTA10__MLB_SIGNAL		0x00C 0x35C ALT7 0x0
-#define VF610_PAD_PTA11__GPIO_4			0x010 0x000 ALT0 0x0
-#define VF610_PAD_PTA11__TMS			0x010 0x000 ALT1 0x0
-#define VF610_PAD_PTA11__DCU0_G1		0x010 0x000 ALT4 0x0
-#define VF610_PAD_PTA11__MLB_DATA		0x010 0x358 ALT7 0x0
-#define VF610_PAD_PTA12__GPIO_5			0x014 0x000 ALT0 0x0
-#define VF610_PAD_PTA12__TRACECK		0x014 0x000 ALT1 0x0
-#define VF610_PAD_PTA12__EXT_AUDIO_MCLK		0x014 0x2EC ALT2 0x1
-#define VF610_PAD_PTA12__VIU_DATA13		0x014 0x000 ALT6 0x0
-#define VF610_PAD_PTA12__I2C0_SCL		0x014 0x33C ALT7 0x0
-#define VF610_PAD_PTA16__GPIO_6			0x018 0x000 ALT0 0x0
-#define VF610_PAD_PTA16__TRACED0		0x018 0x000 ALT1 0x0
-#define VF610_PAD_PTA16__USB0_VBUS_EN		0x018 0x000 ALT2 0x0
-#define VF610_PAD_PTA16__ADC1_SE0		0x018 0x000 ALT3 0x0
-#define VF610_PAD_PTA16__LCD29			0x018 0x000 ALT4 0x0
-#define VF610_PAD_PTA16__SAI2_TX_BCLK		0x018 0x370 ALT5 0x0
-#define VF610_PAD_PTA16__VIU_DATA14		0x018 0x000 ALT6 0x0
-#define VF610_PAD_PTA16__I2C0_SDA		0x018 0x340 ALT7 0x0
-#define VF610_PAD_PTA17__GPIO_7			0x01C 0x000 ALT0 0x0
-#define VF610_PAD_PTA17__TRACED1		0x01C 0x000 ALT1 0x0
-#define VF610_PAD_PTA17__USB0_VBUS_OC		0x01C 0x000 ALT2 0x0
-#define VF610_PAD_PTA17__ADC1_SE1		0x01C 0x000 ALT3 0x0
-#define VF610_PAD_PTA17__LCD30			0x01C 0x000 ALT4 0x0
-#define VF610_PAD_PTA17__USB0_SOF_PULSE		0x01C 0x000 ALT5 0x0
-#define VF610_PAD_PTA17__VIU_DATA15		0x01C 0x000 ALT6 0x0
-#define VF610_PAD_PTA17__I2C1_SCL		0x01C 0x344 ALT7 0x0
-#define VF610_PAD_PTA18__GPIO_8			0x020 0x000 ALT0 0x0
-#define VF610_PAD_PTA18__TRACED2		0x020 0x000 ALT1 0x0
-#define VF610_PAD_PTA18__ADC0_SE0		0x020 0x000 ALT2 0x0
-#define VF610_PAD_PTA18__FTM1_QD_PHA		0x020 0x334 ALT3 0x0
-#define VF610_PAD_PTA18__LCD31			0x020 0x000 ALT4 0x0
-#define VF610_PAD_PTA18__SAI2_TX_DATA		0x020 0x000 ALT5 0x0
-#define VF610_PAD_PTA18__VIU_DATA16		0x020 0x000 ALT6 0x0
-#define VF610_PAD_PTA18__I2C1_SDA		0x020 0x348 ALT7 0x0
-#define VF610_PAD_PTA19__GPIO_9			0x024 0x000 ALT0 0x0
-#define VF610_PAD_PTA19__TRACED3		0x024 0x000 ALT1 0x0
-#define VF610_PAD_PTA19__ADC0_SE1		0x024 0x000 ALT2 0x0
-#define VF610_PAD_PTA19__FTM1_QD_PHB		0x024 0x338 ALT3 0x0
-#define VF610_PAD_PTA19__LCD32			0x024 0x000 ALT4 0x0
-#define VF610_PAD_PTA19__SAI2_TX_SYNC		0x024 0x000 ALT5 0x0
-#define VF610_PAD_PTA19__VIU_DATA17		0x024 0x000 ALT6 0x0
-#define VF610_PAD_PTA19__QSPI1_A_QSCK		0x024 0x374 ALT7 0x0
-#define VF610_PAD_PTA20__GPIO_10		0x028 0x000 ALT0 0x0
-#define VF610_PAD_PTA20__TRACED4		0x028 0x000 ALT1 0x0
-#define VF610_PAD_PTA20__LCD33			0x028 0x000 ALT4 0x0
-#define VF610_PAD_PTA20__UART3_TX		0x028 0x394 ALT6 0x0
-#define VF610_PAD_PTA20__DCU1_HSYNC		0x028 0x000 ALT7 0x0
-#define VF610_PAD_PTA21__GPIO_11		0x02C 0x000 ALT0 0x0
-#define VF610_PAD_PTA21__TRACED5		0x02C 0x000 ALT1 0x0
-#define VF610_PAD_PTA21__SAI2_RX_BCLK		0x02C 0x364 ALT5 0x0
-#define VF610_PAD_PTA21__UART3_RX		0x02C 0x390 ALT6 0x0
-#define VF610_PAD_PTA21__DCU1_VSYNC		0x02C 0x000 ALT7 0x0
-#define VF610_PAD_PTA22__GPIO_12		0x030 0x000 ALT0 0x0
-#define VF610_PAD_PTA22__TRACED6		0x030 0x000 ALT1 0x0
-#define VF610_PAD_PTA22__SAI2_RX_DATA		0x030 0x368 ALT5 0x0
-#define VF610_PAD_PTA22__I2C2_SCL		0x030 0x34C ALT6 0x0
-#define VF610_PAD_PTA22__DCU1_TAG		0x030 0x000 ALT7 0x0
-#define VF610_PAD_PTA23__GPIO_13		0x034 0x000 ALT0 0x0
-#define VF610_PAD_PTA23__TRACED7		0x034 0x000 ALT1 0x0
-#define VF610_PAD_PTA23__SAI2_RX_SYNC		0x034 0x36C ALT5 0x0
-#define VF610_PAD_PTA23__I2C2_SDA		0x034 0x350 ALT6 0x0
-#define VF610_PAD_PTA23__DCU1_DE		0x034 0x000 ALT7 0x0
-#define VF610_PAD_PTA24__GPIO_14		0x038 0x000 ALT0 0x0
-#define VF610_PAD_PTA24__TRACED8		0x038 0x000 ALT1 0x0
-#define VF610_PAD_PTA24__USB1_VBUS_EN		0x038 0x000 ALT2 0x0
-#define VF610_PAD_PTA24__ESDHC1_CLK		0x038 0x000 ALT5 0x0
-#define VF610_PAD_PTA24__DCU1_TCON4		0x038 0x000 ALT6 0x0
-#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL	0x038 0x000 ALT7 0x0
-#define VF610_PAD_PTA25__GPIO_15		0x03C 0x000 ALT0 0x0
-#define VF610_PAD_PTA25__TRACED9		0x03C 0x000 ALT1 0x0
-#define VF610_PAD_PTA25__USB1_VBUS_OC		0x03C 0x000 ALT2 0x0
-#define VF610_PAD_PTA25__ESDHC1_CMD		0x03C 0x000 ALT5 0x0
-#define VF610_PAD_PTA25__DCU1_TCON5		0x03C 0x000 ALT6 0x0
-#define VF610_PAD_PTA26__GPIO_16		0x040 0x000 ALT0 0x0
-#define VF610_PAD_PTA26__TRACED10		0x040 0x000 ALT1 0x0
-#define VF610_PAD_PTA26__SAI3_TX_BCLK		0x040 0x000 ALT2 0x0
-#define VF610_PAD_PTA26__ESDHC1_DAT0		0x040 0x000 ALT5 0x0
-#define VF610_PAD_PTA26__DCU1_TCON6		0x040 0x000 ALT6 0x0
-#define VF610_PAD_PTA27__GPIO_17		0x044 0x000 ALT0 0x0
-#define VF610_PAD_PTA27__TRACED11		0x044 0x000 ALT1 0x0
-#define VF610_PAD_PTA27__SAI3_RX_BCLK		0x044 0x000 ALT2 0x0
-#define VF610_PAD_PTA27__ESDHC1_DAT1		0x044 0x000 ALT5 0x0
-#define VF610_PAD_PTA27__DCU1_TCON7		0x044 0x000 ALT6 0x0
-#define VF610_PAD_PTA28__GPIO_18		0x048 0x000 ALT0 0x0
-#define VF610_PAD_PTA28__TRACED12		0x048 0x000 ALT1 0x0
-#define VF610_PAD_PTA28__SAI3_RX_DATA		0x048 0x000 ALT2 0x0
-#define VF610_PAD_PTA28__ENET1_1588_TMR0	0x048 0x000 ALT3 0x0
-#define VF610_PAD_PTA28__UART4_TX		0x048 0x000 ALT4 0x0
-#define VF610_PAD_PTA28__ESDHC1_DATA2		0x048 0x000 ALT5 0x0
-#define VF610_PAD_PTA28__DCU1_TCON8		0x048 0x000 ALT6 0x0
-#define VF610_PAD_PTA29__GPIO_19		0x04C 0x000 ALT0 0x0
-#define VF610_PAD_PTA29__TRACED13		0x04C 0x000 ALT1 0x0
-#define VF610_PAD_PTA29__SAI3_TX_DATA		0x04C 0x000 ALT2 0x0
-#define VF610_PAD_PTA29__ENET1_1588_TMR1	0x04C 0x000 ALT3 0x0
-#define VF610_PAD_PTA29__UART4_RX		0x04C 0x000 ALT4 0x0
-#define VF610_PAD_PTA29__ESDHC1_DAT3		0x04C 0x000 ALT5 0x0
-#define VF610_PAD_PTA29__DCU1_TCON9		0x04C 0x000 ALT6 0x0
-#define VF610_PAD_PTA30__GPIO_20		0x050 0x000 ALT0 0x0
-#define VF610_PAD_PTA30__TRACED14		0x050 0x000 ALT1 0x0
-#define VF610_PAD_PTA30__SAI3_RX_SYNC		0x050 0x000 ALT2 0x0
-#define VF610_PAD_PTA30__ENET1_1588_TMR2	0x050 0x000 ALT3 0x0
-#define VF610_PAD_PTA30__UART4_RTS		0x050 0x000 ALT4 0x0
-#define VF610_PAD_PTA30__I2C3_SCL		0x050 0x000 ALT5 0x0
-#define VF610_PAD_PTA30__UART3_TX		0x050 0x394 ALT7 0x1
-#define VF610_PAD_PTA31__GPIO_21		0x054 0x000 ALT0 0x0
-#define VF610_PAD_PTA31__TRACED15		0x054 0x000 ALT1 0x0
-#define VF610_PAD_PTA31__SAI3_TX_SYNC		0x054 0x000 ALT2 0x0
-#define VF610_PAD_PTA31__ENET1_1588_TMR3	0x054 0x000 ALT3 0x0
-#define VF610_PAD_PTA31__UART4_CTS		0x054 0x000 ALT4 0x0
-#define VF610_PAD_PTA31__I2C3_SDA		0x054 0x000 ALT5 0x0
-#define VF610_PAD_PTA31__UART3_RX		0x054 0x390 ALT7 0x1
-#define VF610_PAD_PTB0__GPIO_22			0x058 0x000 ALT0 0x0
-#define VF610_PAD_PTB0__FTM0_CH0		0x058 0x000 ALT1 0x0
-#define VF610_PAD_PTB0__ADC0_SE2		0x058 0x000 ALT2 0x0
-#define VF610_PAD_PTB0__TRACE_CTL		0x058 0x000 ALT3 0x0
-#define VF610_PAD_PTB0__LCD34			0x058 0x000 ALT4 0x0
-#define VF610_PAD_PTB0__SAI2_RX_BCLK		0x058 0x364 ALT5 0x1
-#define VF610_PAD_PTB0__VIU_DATA18		0x058 0x000 ALT6 0x0
-#define VF610_PAD_PTB0__QSPI1_A_QPCS0		0x058 0x000 ALT7 0x0
-#define VF610_PAD_PTB1__GPIO_23			0x05C 0x000 ALT0 0x0
-#define VF610_PAD_PTB1__FTM0_CH1		0x05C 0x000 ALT1 0x0
-#define VF610_PAD_PTB1__ADC0_SE3		0x05C 0x000 ALT2 0x0
-#define VF610_PAD_PTB1__SRC_RCON30		0x05C 0x000 ALT3 0x0
-#define VF610_PAD_PTB1__LCD35			0x05C 0x000 ALT4 0x0
-#define VF610_PAD_PTB1__SAI2_RX_DATA		0x05C 0x368 ALT5 0x1
-#define VF610_PAD_PTB1__VIU_DATA19		0x05C 0x000 ALT6 0x0
-#define VF610_PAD_PTB1__QSPI1_A_DATA3		0x05C 0x000 ALT7 0x0
-#define VF610_PAD_PTB2__GPIO_24			0x060 0x000 ALT0 0x0
-#define VF610_PAD_PTB2__FTM0_CH2		0x060 0x000 ALT1 0x0
-#define VF610_PAD_PTB2__ADC1_SE2		0x060 0x000 ALT2 0x0
-#define VF610_PAD_PTB2__SRC_RCON31		0x060 0x000 ALT3 0x0
-#define VF610_PAD_PTB2__LCD36			0x060 0x000 ALT4 0x0
-#define VF610_PAD_PTB2__SAI2_RX_SYNC		0x060 0x36C ALT5 0x1
-#define VF610_PAD_PTB2__VIDEO_IN0_DATA20	0x060 0x000 ALT6 0x0
-#define VF610_PAD_PTB2__QSPI1_A_DATA2		0x060 0x000 ALT7 0x0
-#define VF610_PAD_PTB3__GPIO_25			0x064 0x000 ALT0 0x0
-#define VF610_PAD_PTB3__FTM0_CH3		0x064 0x000 ALT1 0x0
-#define VF610_PAD_PTB3__ADC1_SE3		0x064 0x000 ALT2 0x0
-#define VF610_PAD_PTB3__PDB_EXTRIG		0x064 0x000 ALT3 0x0
-#define VF610_PAD_PTB3__LCD37			0x064 0x000 ALT4 0x0
-#define VF610_PAD_PTB3__VIU_DATA21		0x064 0x000 ALT6 0x0
-#define VF610_PAD_PTB3__QSPI1_A_DATA1		0x064 0x000 ALT7 0x0
-#define VF610_PAD_PTB4__GPIO_26			0x068 0x000 ALT0 0x0
-#define VF610_PAD_PTB4__FTM0_CH4		0x068 0x000 ALT1 0x0
-#define VF610_PAD_PTB4__UART1_TX		0x068 0x380 ALT2 0x0
-#define VF610_PAD_PTB4__ADC0_SE4		0x068 0x000 ALT3 0x0
-#define VF610_PAD_PTB4__LCD38			0x068 0x000 ALT4 0x0
-#define VF610_PAD_PTB4__VIU_FID			0x068 0x3A8 ALT5 0x0
-#define VF610_PAD_PTB4__VIU_DATA22		0x068 0x000 ALT6 0x0
-#define VF610_PAD_PTB4__QSPI1_A_DATA0		0x068 0x000 ALT7 0x0
-#define VF610_PAD_PTB5__GPIO_27			0x06C 0x000 ALT0 0x0
-#define VF610_PAD_PTB5__FTM0_CH5		0x06C 0x000 ALT1 0x0
-#define VF610_PAD_PTB5__UART1_RX		0x06C 0x37C ALT2 0x0
-#define VF610_PAD_PTB5__ADC1_SE4		0x06C 0x000 ALT3 0x0
-#define VF610_PAD_PTB5__LCD39			0x06C 0x000 ALT4 0x0
-#define VF610_PAD_PTB5__VIU_DE			0x06C 0x3A4 ALT5 0x0
-#define VF610_PAD_PTB5__QSPI1_A_DQS		0x06C 0x000 ALT7 0x0
-#define VF610_PAD_PTB6__GPIO_28			0x070 0x000 ALT0 0x0
-#define VF610_PAD_PTB6__FTM0_CH6		0x070 0x000 ALT1 0x0
-#define VF610_PAD_PTB6__UART1_RTS		0x070 0x000 ALT2 0x0
-#define VF610_PAD_PTB6__QSPI0_QPCS1_A		0x070 0x000 ALT3 0x0
-#define VF610_PAD_PTB6__LCD_LCD40		0x070 0x000 ALT4 0x0
-#define VF610_PAD_PTB6__FB_CLKOUT		0x070 0x000 ALT5 0x0
-#define VF610_PAD_PTB6__VIU_HSYNC		0x070 0x000 ALT6 0x0
-#define VF610_PAD_PTB6__UART2_TX		0x070 0x38C ALT7 0x0
-#define VF610_PAD_PTB7__GPIO_29			0x074 0x000 ALT0 0x0
-#define VF610_PAD_PTB7__FTM0_CH7		0x074 0x000 ALT1 0x0
-#define VF610_PAD_PTB7__UART1_CTS		0x074 0x378 ALT2 0x0
-#define VF610_PAD_PTB7__QSPI0_B_QPCS1		0x074 0x000 ALT3 0x0
-#define VF610_PAD_PTB7__LCD41			0x074 0x000 ALT4 0x0
-#define VF610_PAD_PTB7__VIU_VSYNC		0x074 0x000 ALT6 0x0
-#define VF610_PAD_PTB7__UART2_RX		0x074 0x388 ALT7 0x0
-#define VF610_PAD_PTB8__GPIO_30			0x078 0x000 ALT0 0x0
-#define VF610_PAD_PTB8__FTM1_CH0		0x078 0x32C ALT1 0x0
-#define VF610_PAD_PTB8__FTM1_QD_PHA		0x078 0x334 ALT3 0x1
-#define VF610_PAD_PTB8__VIU_DE			0x078 0x3A4 ALT5 0x1
-#define VF610_PAD_PTB8__DCU1_R6			0x078 0x000 ALT7 0x0
-#define VF610_PAD_PTB9__GPIO_31			0x07C 0x000 ALT0 0x0
-#define VF610_PAD_PTB9__FTM1_CH1		0x07C 0x330 ALT1 0x0
-#define VF610_PAD_PTB9__FTM1_QD_PHB		0x07C 0x338 ALT3 0x1
-#define VF610_PAD_PTB9__DCU1_R7			0x07C 0x000 ALT7 0x0
-#define VF610_PAD_PTB10__GPIO_32		0x080 0x000 ALT0 0x0
-#define VF610_PAD_PTB10__UART0_TX		0x080 0x000 ALT1 0x0
-#define VF610_PAD_PTB10__DCU0_TCON4		0x080 0x000 ALT4 0x0
-#define VF610_PAD_PTB10__VIU_DE			0x080 0x3A4 ALT5 0x2
-#define VF610_PAD_PTB10__CKO1			0x080 0x000 ALT6 0x0
-#define VF610_PAD_PTB10__ENET_TS_CLKIN		0x080 0x2F4 ALT7 0x1
-#define VF610_PAD_PTB11__GPIO_33		0x084 0x000 ALT0 0x0
-#define VF610_PAD_PTB11__UART0_RX		0x084 0x000 ALT1 0x0
-#define VF610_PAD_PTB11__DCU0_TCON5		0x084 0x000 ALT4 0x0
-#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B	0x084 0x000 ALT5 0x0
-#define VF610_PAD_PTB11__CKO2			0x084 0x000 ALT6 0x0
-#define VF610_PAD_PTB11_ENET0_1588_TMR0		0x084 0x304 ALT7 0x0
-#define VF610_PAD_PTB12__GPIO_34		0x088 0x000 ALT0 0x0
-#define VF610_PAD_PTB12__UART0_RTS		0x088 0x000 ALT1 0x0
-#define VF610_PAD_PTB12__DSPI0_CS5		0x088 0x000 ALT3 0x0
-#define VF610_PAD_PTB12__DCU0_TCON6		0x088 0x000 ALT4 0x0
-#define VF610_PAD_PTB12__FB_AD1			0x088 0x000 ALT5 0x0
-#define VF610_PAD_PTB12__NMI			0x088 0x000 ALT6 0x0
-#define VF610_PAD_PTB12__ENET0_1588_TMR1	0x088 0x308 ALT7 0x0
-#define VF610_PAD_PTB13__GPIO_35		0x08C 0x000 ALT0 0x0
-#define VF610_PAD_PTB13__UART0_CTS		0x08C 0x000 ALT1 0x0
-#define VF610_PAD_PTB13__DSPI0_CS4		0x08C 0x000 ALT3 0x0
-#define VF610_PAD_PTB13__DCU0_TCON7		0x08C 0x000 ALT4 0x0
-#define VF610_PAD_PTB13__FB_AD0			0x08C 0x000 ALT5 0x0
-#define VF610_PAD_PTB13__TRACE_CTL		0x08C 0x000 ALT6 0x0
-#define VF610_PAD_PTB14__GPIO_36		0x090 0x000 ALT0 0x0
-#define VF610_PAD_PTB14__CAN0_RX		0x090 0x000 ALT1 0x0
-#define VF610_PAD_PTB14__I2C0_SCL		0x090 0x33C ALT2 0x1
-#define VF610_PAD_PTB14__DCU0_TCON8		0x090 0x000 ALT4 0x0
-#define VF610_PAD_PTB14__DCU1_PCLK		0x090 0x000 ALT7 0x0
-#define VF610_PAD_PTB15__GPIO_37		0x094 0x000 ALT0 0x0
-#define VF610_PAD_PTB15__CAN0_TX		0x094 0x000 ALT1 0x0
-#define VF610_PAD_PTB15__I2C0_SDA		0x094 0x340 ALT2 0x1
-#define VF610_PAD_PTB15__DCU0_TCON9		0x094 0x000 ALT4 0x0
-#define VF610_PAD_PTB15__VIU_PIX_CLK		0x094 0x3AC ALT7 0x0
-#define VF610_PAD_PTB16__GPIO_38		0x098 0x000 ALT0 0x0
-#define VF610_PAD_PTB16__CAN1_RX		0x098 0x000 ALT1 0x0
-#define VF610_PAD_PTB16__I2C1_SCL		0x098 0x344 ALT2 0x1
-#define VF610_PAD_PTB16__DCU0_TCON10		0x098 0x000 ALT4 0x0
-#define VF610_PAD_PTB17__GPIO_39		0x09C 0x000 ALT0 0x0
-#define VF610_PAD_PTB17__CAN1_TX		0x09C 0x000 ALT1 0x0
-#define VF610_PAD_PTB17__I2C1_SDA		0x09C 0x348 ALT2 0x1
-#define VF610_PAD_PTB17__DCU0_TCON11		0x09C 0x000 ALT4 0x0
-#define VF610_PAD_PTB18__GPIO_40		0x0A0 0x000 ALT0 0x0
-#define VF610_PAD_PTB18__DSPI0_CS1		0x0A0 0x000 ALT1 0x0
-#define VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x0A0 0x2EC ALT2 0x2
-#define VF610_PAD_PTB18__VIU_DATA9		0x0A0 0x000 ALT6 0x0
-#define VF610_PAD_PTB19__GPIO_41		0x0A4 0x000 ALT0 0x0
-#define VF610_PAD_PTB19__DSPI0_CS0		0x0A4 0x000 ALT1 0x0
-#define VF610_PAD_PTB19__VIU_DATA10		0x0A4 0x000 ALT6 0x0
-#define VF610_PAD_PTB20__GPIO_42		0x0A8 0x000 ALT0 0x0
-#define VF610_PAD_PTB20__DSPI0_SIN		0x0A8 0x000 ALT1 0x0
-#define VF610_PAD_PTB20__LCD42			0x0A8 0x000 ALT4 0x0
-#define VF610_PAD_PTB20__VIU_DATA11		0x0A8 0x000 ALT6 0x0
-#define VF610_PAD_PTB21__GPIO_43		0x0AC 0x000 ALT0 0x0
-#define VF610_PAD_PTB21__DSPI0_SOUT		0x0AC 0x000 ALT1 0x0
-#define VF610_PAD_PTB21__LCD43			0x0AC 0x000 ALT4 0x0
-#define VF610_PAD_PTB21__VIU_DATA12		0x0AC 0x000 ALT6 0x0
-#define VF610_PAD_PTB21__DCU1_PCLK		0x0AC 0x000 ALT7 0x0
-#define VF610_PAD_PTB22__GPIO_44		0x0B0 0x000 ALT0 0x0
-#define VF610_PAD_PTB22__DSPI0_SCK		0x0B0 0x000 ALT1 0x0
-#define VF610_PAD_PTB22__VLCD			0x0B0 0x000 ALT4 0x0
-#define VF610_PAD_PTB22__VIU_FID		0x0B0 0x3A8 ALT5 0x1
-#define VF610_PAD_PTC0__GPIO_45			0x0B4 0x000 ALT0 0x0
-#define VF610_PAD_PTC0__ENET_RMII0_MDC		0x0B4 0x000 ALT1 0x0
-#define VF610_PAD_PTC0__FTM1_CH0		0x0B4 0x32C ALT2 0x1
-#define VF610_PAD_PTC0__DSPI0_CS3		0x0B4 0x000 ALT3 0x0
-#define VF610_PAD_PTC0__ESAI_SCKT		0x0B4 0x310 ALT4 0x0
-#define VF610_PAD_PTC0__ESDHC0_CLK		0x0B4 0x000 ALT5 0x0
-#define VF610_PAD_PTC0__VIU_DATA0		0x0B4 0x000 ALT6 0x0
-#define VF610_PAD_PTC0__SRC_RCON18		0x0B4 0x398 ALT7 0x0
-#define VF610_PAD_PTC1__GPIO_46			0x0B8 0x000 ALT0 0x0
-#define VF610_PAD_PTC1__ENET_RMII0_MDIO		0x0B8 0x000 ALT1 0x0
-#define VF610_PAD_PTC1__FTM1_CH1		0x0B8 0x330 ALT2 0x1
-#define VF610_PAD_PTC1__DSPI0_CS2		0x0B8 0x000 ALT3 0x0
-#define VF610_PAD_PTC1__ESAI_FST		0x0B8 0x30C ALT4 0x0
-#define VF610_PAD_PTC1__ESDHC0_CMD		0x0B8 0x000 ALT5 0x0
-#define VF610_PAD_PTC1__VIU_DATA1		0x0B8 0x000 ALT6 0x0
-#define VF610_PAD_PTC1__SRC_RCON19		0x0B8 0x39C ALT7 0x0
-#define VF610_PAD_PTC2__GPIO_47			0x0BC 0x000 ALT0 0x0
-#define VF610_PAD_PTC2__ENET_RMII0_CRS		0x0BC 0x000 ALT1 0x0
-#define VF610_PAD_PTC2__UART1_TX		0x0BC 0x380 ALT2 0x1
-#define VF610_PAD_PTC2__ESAI_SDO0		0x0BC 0x314 ALT4 0x0
-#define VF610_PAD_PTC2__ESDHC0_DAT0		0x0BC 0x000 ALT5 0x0
-#define VF610_PAD_PTC2__VIU_DATA2		0x0BC 0x000 ALT6 0x0
-#define VF610_PAD_PTC2__SRC_RCON20		0x0BC 0x3A0 ALT7 0x0
-#define VF610_PAD_PTC3__GPIO_48			0x0C0 0x000 ALT0 0x0
-#define VF610_PAD_PTC3__ENET_RMII0_RXD1		0x0C0 0x000 ALT1 0x0
-#define VF610_PAD_PTC3__UART1_RX		0x0C0 0x37C ALT2 0x1
-#define VF610_PAD_PTC3__ESAI_SDO1		0x0C0 0x318 ALT4 0x0
-#define VF610_PAD_PTC3__ESDHC0_DAT1		0x0C0 0x000 ALT5 0x0
-#define VF610_PAD_PTC3__VIU_DATA3		0x0C0 0x000 ALT6 0x0
-#define VF610_PAD_PTC3__DCU0_R0			0x0C0 0x000 ALT7 0x0
-#define VF610_PAD_PTC4__GPIO_49			0x0C4 0x000 ALT0 0x0
-#define VF610_PAD_PTC4__ENET_RMII0_RXD0		0x0C4 0x000 ALT1 0x0
-#define VF610_PAD_PTC4__UART1_RTS		0x0C4 0x000 ALT2 0x0
-#define VF610_PAD_PTC4__DSPI1_CS1		0x0C4 0x000 ALT3 0x0
-#define VF610_PAD_PTC4__ESAI_SDO2		0x0C4 0x31C ALT4 0x0
-#define VF610_PAD_PTC4__ESDHC0_DAT2		0x0C4 0x000 ALT5 0x0
-#define VF610_PAD_PTC4__VIU_DATA4		0x0C4 0x000 ALT6 0x0
-#define VF610_PAD_PTC4__DCU0_R1			0x0C4 0x000 ALT7 0x0
-#define VF610_PAD_PTC5__GPIO_50			0x0C8 0x000 ALT0 0x0
-#define VF610_PAD_PTC5__ENET_RMII0_RXER		0x0C8 0x000 ALT1 0x0
-#define VF610_PAD_PTC5__UART1_CTS		0x0C8 0x378 ALT2 0x1
-#define VF610_PAD_PTC5__DSPI1_CS0		0x0C8 0x300 ALT3 0x0
-#define VF610_PAD_PTC5__ESAI_SDO3		0x0C8 0x320 ALT4 0x0
-#define VF610_PAD_PTC5__ESDHC0_DAT3		0x0C8 0x000 ALT5 0x0
-#define VF610_PAD_PTC5__VIU_DATA5		0x0C8 0x000 ALT6 0x0
-#define VF610_PAD_PTC5__DCU0_G0			0x0C8 0x000 ALT7 0x0
-#define VF610_PAD_PTC6__GPIO_51			0x0CC 0x000 ALT0 0x0
-#define VF610_PAD_PTC6__ENET_RMII0_TXD1		0x0CC 0x000 ALT1 0x0
-#define VF610_PAD_PTC6__DSPI1_SIN		0x0CC 0x2FC ALT3 0x0
-#define VF610_PAD_PTC6__ESAI_SDI0		0x0CC 0x328 ALT4 0x0
-#define VF610_PAD_PTC6__ESDHC0_WP		0x0CC 0x000 ALT5 0x0
-#define VF610_PAD_PTC6__VIU_DATA6		0x0CC 0x000 ALT6 0x0
-#define VF610_PAD_PTC6__DCU0_G1			0x0CC 0x000 ALT7 0x0
-#define VF610_PAD_PTC7__GPIO_52			0x0D0 0x000 ALT0 0x0
-#define VF610_PAD_PTC7__ENET_RMII0_TXD0		0x0D0 0x000 ALT1 0x0
-#define VF610_PAD_PTC7__DSPI1_SOUT		0x0D0 0x000 ALT3 0x0
-#define VF610_PAD_PTC7__ESAI_SDI1		0x0D0 0x324 ALT4 0x0
-#define VF610_PAD_PTC7__VIU_DATA7		0x0D0 0x000 ALT6 0x0
-#define VF610_PAD_PTC7__DCU0_B0			0x0D0 0x000 ALT7 0x0
-#define VF610_PAD_PTC8__GPIO_53			0x0D4 0x000 ALT0 0x0
-#define VF610_PAD_PTC8__ENET_RMII0_TXEN		0x0D4 0x000 ALT1 0x0
-#define VF610_PAD_PTC8__DSPI1_SCK		0x0D4 0x2F8 ALT3 0x0
-#define VF610_PAD_PTC8__VIU_DATA8		0x0D4 0x000 ALT6 0x0
-#define VF610_PAD_PTC8__DCU0_B1			0x0D4 0x000 ALT7 0x0
-#define VF610_PAD_PTC9__GPIO_54			0x0D8 0x000 ALT0 0x0
-#define VF610_PAD_PTC9__ENET_RMII1_MDC		0x0D8 0x000 ALT1 0x0
-#define VF610_PAD_PTC9__ESAI_SCKT		0x0D8 0x310 ALT3 0x1
-#define VF610_PAD_PTC9__MLB_CLK			0x0D8 0x354 ALT6 0x1
-#define VF610_PAD_PTC9__DEBUG_OUT0		0x0D8 0x000 ALT7 0x0
-#define VF610_PAD_PTC10__GPIO_55		0x0DC 0x000 ALT0 0x0
-#define VF610_PAD_PTC10__ENET_RMII1_MDIO	0x0DC 0x000 ALT1 0x0
-#define VF610_PAD_PTC10__ESAI_FST		0x0DC 0x30C ALT3 0x1
-#define VF610_PAD_PTC10__MLB_SIGNAL		0x0DC 0x35C ALT6 0x1
-#define VF610_PAD_PTC10__DEBUG_OUT1		0x0DC 0x000 ALT7 0x0
-#define VF610_PAD_PTC11__GPIO_56		0x0E0 0x000 ALT0 0x0
-#define VF610_PAD_PTC11__ENET_RMII1_CRS		0x0E0 0x000 ALT1 0x0
-#define VF610_PAD_PTC11__ESAI_SDO0		0x0E0 0x314 ALT3 0x1
-#define VF610_PAD_PTC11__MLB_DATA		0x0E0 0x358 ALT6 0x1
-#define VF610_PAD_PTC11__DEBUG_OUT		0x0E0 0x000 ALT7 0x0
-#define VF610_PAD_PTC12__GPIO_57		0x0E4 0x000 ALT0 0x0
-#define VF610_PAD_PTC12__ENET_RMII_RXD1		0x0E4 0x000 ALT1 0x0
-#define VF610_PAD_PTC12__ESAI_SDO1		0x0E4 0x318 ALT3 0x1
-#define VF610_PAD_PTC12__SAI2_TX_BCLK		0x0E4 0x370 ALT5 0x1
-#define VF610_PAD_PTC12__DEBUG_OUT3		0x0E4 0x000 ALT7 0x0
-#define VF610_PAD_PTC13__GPIO_58		0x0E8 0x000 ALT0 0x0
-#define VF610_PAD_PTC13__ENET_RMII1_RXD0	0x0E8 0x000 ALT1 0x0
-#define VF610_PAD_PTC13__ESAI_SDO2		0x0E8 0x31C ALT3 0x1
-#define VF610_PAD_PTC13__SAI2_RX_BCLK		0x0E8 0x364 ALT5 0x2
-#define VF610_PAD_PTC13__DEBUG_OUT4		0x0E8 0x000 ALT7 0x0
-#define VF610_PAD_PTC14__GPIO_59		0x0EC 0x000 ALT0 0x0
-#define VF610_PAD_PTC14__ENET_RMII1_RXER	0x0EC 0x000 ALT1 0x0
-#define VF610_PAD_PTC14__ESAI_SDO3		0x0EC 0x320 ALT3 0x1
-#define VF610_PAD_PTC14__UART5_TX		0x0EC 0x000 ALT4 0x0
-#define VF610_PAD_PTC14__SAI2_RX_DATA		0x0EC 0x368 ALT5 0x2
-#define VF610_PAD_PTC14__ADC0_SE6		0x0EC 0x000 ALT6 0x0
-#define VF610_PAD_PTC14__DEBUG_OUT5		0x0EC 0x000 ALT7 0x0
-#define VF610_PAD_PTC15__GPIO_60		0x0F0 0x000 ALT0 0x0
-#define VF610_PAD_PTC15__ENET_RMII1_TXD1	0x0F0 0x000 ALT1 0x0
-#define VF610_PAD_PTC15__ESAI_SDI0		0x0F0 0x328 ALT3 0x1
-#define VF610_PAD_PTC15__UART5_RX		0x0F0 0x000 ALT4 0x0
-#define VF610_PAD_PTC15__SAI2_TX_DATA		0x0F0 0x000 ALT5 0x0
-#define VF610_PAD_PTC15__ADC0_SE7		0x0F0 0x000 ALT6 0x0
-#define VF610_PAD_PTC15__DEBUG_OUT6		0x0F0 0x000 ALT7 0x0
-#define VF610_PAD_PTC16__GPIO_61		0x0F4 0x000 ALT0 0x0
-#define VF610_PAD_PTC16__ENET_RMII1_TXD0	0x0F4 0x000 ALT1 0x0
-#define VF610_PAD_PTC16__ESAI_SDI1		0x0F4 0x324 ALT3 0x1
-#define VF610_PAD_PTC16__UART5_RTS		0x0F4 0x000 ALT4 0x0
-#define VF610_PAD_PTC16__SAI2_RX_SYNC		0x0F4 0x36C ALT5 0x2
-#define VF610_PAD_PTC16__ADC1_SE6		0x0F4 0x000 ALT6 0x0
-#define VF610_PAD_PTC16__DEBUG_OUT7		0x0F4 0x000 ALT7 0x0
-#define VF610_PAD_PTC17__GPIO_62		0x0F8 0x000 ALT0 0x0
-#define VF610_PAD_PTC17__ENET_RMII1_TXEN	0x0F8 0x000 ALT1 0x0
-#define VF610_PAD_PTC17__ADC1_SE7		0x0F8 0x000 ALT3 0x0
-#define VF610_PAD_PTC17__UART5_CTS		0x0F8 0x000 ALT4 0x0
-#define VF610_PAD_PTC17__SAI2_TX_SYNC		0x0F8 0x374 ALT5 0x1
-#define VF610_PAD_PTC17__USB1_SOF_PULSE		0x0F8 0x000 ALT6 0x0
-#define VF610_PAD_PTC17__DEBUG_OUT8		0x0F8 0x000 ALT7 0x0
-#define VF610_PAD_PTD31__GPIO_63		0x0FC 0x000 ALT0 0x0
-#define VF610_PAD_PTD31__FB_AD31		0x0FC 0x000 ALT1 0x0
-#define VF610_PAD_PTD31__NF_IO15		0x0FC 0x000 ALT2 0x0
-#define VF610_PAD_PTD31__FTM3_CH0		0x0FC 0x000 ALT4 0x0
-#define VF610_PAD_PTD31__DSPI2_CS1		0x0FC 0x000 ALT5 0x0
-#define VF610_PAD_PTD31__DEBUG_OUT9		0x0FC 0x000 ALT7 0x0
-#define VF610_PAD_PTD30__GPIO_64		0x100 0x000 ALT0 0x0
-#define VF610_PAD_PTD30__FB_AD30		0x100 0x000 ALT1 0x0
-#define VF610_PAD_PTD30__NF_IO14		0x100 0x000 ALT2 0x0
-#define VF610_PAD_PTD30__FTM3_CH1		0x100 0x000 ALT4 0x0
-#define VF610_PAD_PTD30__DSPI2_CS0		0x100 0x000 ALT5 0x0
-#define VF610_PAD_PTD30__DEBUG_OUT10		0x100 0x000 ALT7 0x0
-#define VF610_PAD_PTD29__GPIO_65		0x104 0x000 ALT0 0x0
-#define VF610_PAD_PTD29__FB_AD29		0x104 0x000 ALT1 0x0
-#define VF610_PAD_PTD29__NF_IO13		0x104 0x000 ALT2 0x0
-#define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
-#define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
-#define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
-#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
-#define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
-#define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
-#define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
-#define VF610_PAD_PTD28__FTM3_CH3		0x108 0x000 ALT4 0x0
-#define VF610_PAD_PTD28__DSPI2_SOUT		0x108 0x000 ALT5 0x0
-#define VF610_PAD_PTD28__DEBUG_OUT12		0x108 0x000 ALT7 0x0
-#define VF610_PAD_PTD27__GPIO_67		0x10C 0x000 ALT0 0x0
-#define VF610_PAD_PTD27__FB_AD27		0x10C 0x000 ALT1 0x0
-#define VF610_PAD_PTD27__NF_IO11		0x10C 0x000 ALT2 0x0
-#define VF610_PAD_PTD27__I2C2_SDA		0x10C 0x350 ALT3 0x1
-#define VF610_PAD_PTD27__FTM3_CH4		0x10C 0x000 ALT4 0x0
-#define VF610_PAD_PTD27__DSPI2_SCK		0x10C 0x000 ALT5 0x0
-#define VF610_PAD_PTD27__DEBUG_OUT13		0x10C 0x000 ALT7 0x0
-#define VF610_PAD_PTD26__GPIO_68		0x110 0x000 ALT0 0x0
-#define VF610_PAD_PTD26__FB_AD26		0x110 0x000 ALT1 0x0
-#define VF610_PAD_PTD26__NF_IO10		0x110 0x000 ALT2 0x0
-#define VF610_PAD_PTD26__FTM3_CH5		0x110 0x000 ALT4 0x0
-#define VF610_PAD_PTD26__ESDHC1_WP		0x110 0x000 ALT5 0x0
-#define VF610_PAD_PTD26__DEBUG_OUT14		0x110 0x000 ALT7 0x0
-#define VF610_PAD_PTD25__GPIO_69		0x114 0x000 ALT0 0x0
-#define VF610_PAD_PTD25__FB_AD25		0x114 0x000 ALT1 0x0
-#define VF610_PAD_PTD25__NF_IO9			0x114 0x000 ALT2 0x0
-#define VF610_PAD_PTD25__FTM3_CH6		0x114 0x000 ALT4 0x0
-#define VF610_PAD_PTD25__DEBUG_OUT15		0x114 0x000 ALT7 0x0
-#define VF610_PAD_PTD24__GPIO_70		0x118 0x000 ALT0 0x0
-#define VF610_PAD_PTD24__FB_AD24		0x118 0x000 ALT1 0x0
-#define VF610_PAD_PTD24__NF_IO8			0x118 0x000 ALT2 0x0
-#define VF610_PAD_PTD24__FTM3_CH7		0x118 0x000 ALT4 0x0
-#define VF610_PAD_PTD24__DEBUG_OUT16		0x118 0x000 ALT7 0x0
-#define VF610_PAD_PTD23__GPIO_71		0x11C 0x000 ALT0 0x0
-#define VF610_PAD_PTD23__FB_AD23		0x11C 0x000 ALT1 0x0
-#define VF610_PAD_PTD23__NF_IO7			0x11C 0x000 ALT2 0x0
-#define VF610_PAD_PTD23__FTM2_CH0		0x11C 0x000 ALT3 0x0
-#define VF610_PAD_PTD23__ENET0_1588_TMR0	0x11C 0x304 ALT4 0x1
-#define VF610_PAD_PTD23__ESDHC0_DAT4		0x11C 0x000 ALT5 0x0
-#define VF610_PAD_PTD23__UART2_TX		0x11C 0x38C ALT6 0x1
-#define VF610_PAD_PTD23__DCU1_R3		0x11C 0x000 ALT7 0x0
-#define VF610_PAD_PTD22__GPIO_72		0x120 0x000 ALT0 0x0
-#define VF610_PAD_PTD22__FB_AD22		0x120 0x000 ALT1 0x0
-#define VF610_PAD_PTD22__NF_IO6			0x120 0x000 ALT2 0x0
-#define VF610_PAD_PTD22__FTM2_CH1		0x120 0x000 ALT3 0x0
-#define VF610_PAD_PTD22__ENET0_1588_TMR1	0x120 0x308 ALT4 0x1
-#define VF610_PAD_PTD22__ESDHC0_DAT5		0x120 0x000 ALT5 0x0
-#define VF610_PAD_PTD22__UART2_RX		0x120 0x388 ALT6 0x1
-#define VF610_PAD_PTD22__DCU1_R4		0x120 0x000 ALT7 0x0
-#define VF610_PAD_PTD21__GPIO_73		0x124 0x000 ALT0 0x0
-#define VF610_PAD_PTD21__FB_AD21		0x124 0x000 ALT1 0x0
-#define VF610_PAD_PTD21__NF_IO5			0x124 0x000 ALT2 0x0
-#define VF610_PAD_PTD21__ENET0_1588_TMR2	0x124 0x000 ALT4 0x0
-#define VF610_PAD_PTD21__ESDHC0_DAT6		0x124 0x000 ALT5 0x0
-#define VF610_PAD_PTD21__UART2_RTS		0x124 0x000 ALT6 0x0
-#define VF610_PAD_PTD21__DCU1_R5		0x124 0x000 ALT7 0x0
-#define VF610_PAD_PTD20__GPIO_74		0x128 0x000 ALT0 0x0
-#define VF610_PAD_PTD20__FB_AD20		0x128 0x000 ALT1 0x0
-#define VF610_PAD_PTD20__NF_IO4			0x128 0x000 ALT2 0x0
-#define VF610_PAD_PTD20__ENET0_1588_TMR3	0x128 0x000 ALT4 0x0
-#define VF610_PAD_PTD20__ESDHC0_DAT7		0x128 0x000 ALT5 0x0
-#define VF610_PAD_PTD20__UART2_CTS		0x128 0x384 ALT6 0x0
-#define VF610_PAD_PTD20__DCU1_R0		0x128 0x000 ALT7 0x0
-#define VF610_PAD_PTD19__GPIO_75		0x12C 0x000 ALT0 0x0
-#define VF610_PAD_PTD19__FB_AD19		0x12C 0x000 ALT1 0x0
-#define VF610_PAD_PTD19__NF_IO3			0x12C 0x000 ALT2 0x0
-#define VF610_PAD_PTD19__ESAI_SCKR		0x12C 0x000 ALT3 0x0
-#define VF610_PAD_PTD19__I2C0_SCL		0x12C 0x33C ALT4 0x2
-#define VF610_PAD_PTD19__FTM2_QD_PHA		0x12C 0x000 ALT5 0x0
-#define VF610_PAD_PTD19__DCU1_R1		0x12C 0x000 ALT7 0x0
-#define VF610_PAD_PTD18__GPIO_76		0x130 0x000 ALT0 0x0
-#define VF610_PAD_PTD18__FB_AD18		0x130 0x000 ALT1 0x0
-#define VF610_PAD_PTD18__NF_IO2			0x130 0x000 ALT2 0x0
-#define VF610_PAD_PTD18__ESAI_FSR		0x130 0x000 ALT3 0x0
-#define VF610_PAD_PTD18__I2C0_SDA		0x130 0x340 ALT4 0x2
-#define VF610_PAD_PTD18__FTM2_QD_PHB		0x130 0x000 ALT5 0x0
-#define VF610_PAD_PTD18__DCU1_G0		0x130 0x000 ALT7 0x0
-#define VF610_PAD_PTD17__GPIO_77		0x134 0x000 ALT0 0x0
-#define VF610_PAD_PTD17__FB_AD17		0x134 0x000 ALT1 0x0
-#define VF610_PAD_PTD17__NF_IO1			0x134 0x000 ALT2 0x0
-#define VF610_PAD_PTD17__ESAI_HCKR		0x134 0x000 ALT3 0x0
-#define VF610_PAD_PTD17__I2C1_SCL		0x134 0x344 ALT4 0x2
-#define VF610_PAD_PTD17__DCU1_G1		0x134 0x000 ALT7 0x0
-#define VF610_PAD_PTD16__GPIO_78		0x138 0x000 ALT0 0x0
-#define VF610_PAD_PTD16__FB_AD16		0x138 0x000 ALT1 0x0
-#define VF610_PAD_PTD16__NF_IO0			0x138 0x000 ALT2 0x0
-#define VF610_PAD_PTD16__ESAI_HCKT		0x138 0x000 ALT3 0x0
-#define VF610_PAD_PTD16__I2C1_SDA		0x138 0x348 ALT4 0x2
-#define VF610_PAD_PTD16__DCU1_G2		0x138 0x000 ALT7 0x0
-#define VF610_PAD_PTD0__GPIO_79			0x13C 0x000 ALT0 0x0
-#define VF610_PAD_PTD0__QSPI0_A_QSCK		0x13C 0x000 ALT1 0x0
-#define VF610_PAD_PTD0__UART2_TX		0x13C 0x38C ALT2 0x2
-#define VF610_PAD_PTD0__FB_AD15			0x13C 0x000 ALT4 0x0
-#define VF610_PAD_PTD0__SPDIF_EXTCLK		0x13C 0x000 ALT5 0x0
-#define VF610_PAD_PTD0__DEBUG_OUT17		0x13C 0x000 ALT7 0x0
-#define VF610_PAD_PTD1__GPIO_80			0x140 0x000 ALT0 0x0
-#define VF610_PAD_PTD1__QSPI0_A_CS0		0x140 0x000 ALT1 0x0
-#define VF610_PAD_PTD1__UART2_RX		0x140 0x388 ALT2 0x2
-#define VF610_PAD_PTD1__FB_AD14			0x140 0x000 ALT4 0x0
-#define VF610_PAD_PTD1__SPDIF_IN1		0x140 0x000 ALT5 0x0
-#define VF610_PAD_PTD1__DEBUG_OUT18		0x140 0x000 ALT7 0x0
-#define VF610_PAD_PTD2__GPIO_81			0x144 0x000 ALT0 0x0
-#define VF610_PAD_PTD2__QSPI0_A_DATA3		0x144 0x000 ALT1 0x0
-#define VF610_PAD_PTD2__UART2_RTS		0x144 0x000 ALT2 0x0
-#define VF610_PAD_PTD2__DSPI1_CS3		0x144 0x000 ALT3 0x0
-#define VF610_PAD_PTD2__FB_AD13			0x144 0x000 ALT4 0x0
-#define VF610_PAD_PTD2__SPDIF_OUT1		0x144 0x000 ALT5 0x0
-#define VF610_PAD_PTD2__DEBUG_OUT19		0x144 0x000 ALT7 0x0
-#define VF610_PAD_PTD3__GPIO_82			0x148 0x000 ALT0 0x0
-#define VF610_PAD_PTD3__QSPI0_A_DATA2		0x148 0x000 ALT1 0x0
-#define VF610_PAD_PTD3__UART2_CTS		0x148 0x384 ALT2 0x1
-#define VF610_PAD_PTD3__DSPI1_CS2		0x148 0x000 ALT3 0x0
-#define VF610_PAD_PTD3__FB_AD12			0x148 0x000 ALT4 0x0
-#define VF610_PAD_PTD3__SPDIF_PLOCK		0x148 0x000 ALT5 0x0
-#define VF610_PAD_PTD3__DEBUG_OUT20		0x148 0x000 ALT7 0x0
-#define VF610_PAD_PTD4__GPIO_83			0x14C 0x000 ALT0 0x0
-#define VF610_PAD_PTD4__QSPI0_A_DATA1		0x14C 0x000 ALT1 0x0
-#define VF610_PAD_PTD4__DSPI1_CS1		0x14C 0x000 ALT3 0x0
-#define VF610_PAD_PTD4__FB_AD11			0x14C 0x000 ALT4 0x0
-#define VF610_PAD_PTD4__SPDIF_SRCLK		0x14C 0x000 ALT5 0x0
-#define VF610_PAD_PTD4__DEBUG_OUT21		0x14C 0x000 ALT7 0x0
-#define VF610_PAD_PTD5__GPIO_84			0x150 0x000 ALT0 0x0
-#define VF610_PAD_PTD5__QSPI0_A_DATA0		0x150 0x000 ALT1 0x0
-#define VF610_PAD_PTD5__DSPI1_CS0		0x150 0x300 ALT3 0x1
-#define VF610_PAD_PTD5__FB_AD10			0x150 0x000 ALT4 0x0
-#define VF610_PAD_PTD5__DEBUG_OUT22		0x150 0x000 ALT7 0x0
-#define VF610_PAD_PTD6__GPIO_85			0x154 0x000 ALT0 0x0
-#define VF610_PAD_PTD6__QSPI1_A_DQS		0x154 0x000 ALT1 0x0
-#define VF610_PAD_PTD6__DSPI1_SIN		0x154 0x2FC ALT3 0x1
-#define VF610_PAD_PTD6__FB_AD9			0x154 0x000 ALT4 0x0
-#define VF610_PAD_PTD6__DEBUG_OUT23		0x154 0x000 ALT7 0x0
-#define VF610_PAD_PTD7__GPIO_86			0x158 0x000 ALT0 0x0
-#define VF610_PAD_PTD7__QSPI0_B_QSCK		0x158 0x000 ALT1 0x0
-#define VF610_PAD_PTD7__DSPI1_SOUT		0x158 0x000 ALT3 0x0
-#define VF610_PAD_PTD7__FB_AD8			0x158 0x000 ALT4 0x0
-#define VF610_PAD_PTD7__DEBUG_OUT24		0x158 0x000 ALT7 0x0
-#define VF610_PAD_PTD8__GPIO_87			0x15C 0x000 ALT0 0x0
-#define VF610_PAD_PTD8__QSPI0_B_CS0		0x15C 0x000 ALT1 0x0
-#define VF610_PAD_PTD8__FB_CLKOUT		0x15C 0x000 ALT2 0x0
-#define VF610_PAD_PTD8__DSPI1_SCK		0x15C 0x2F8 ALT3 0x1
-#define VF610_PAD_PTD8__FB_AD7			0x15C 0x000 ALT4 0x0
-#define VF610_PAD_PTD8__DEBUG_OUT25		0x15C 0x000 ALT7 0x0
-#define VF610_PAD_PTD9__GPIO_88			0x160 0x000 ALT0 0x0
-#define VF610_PAD_PTD9__QSPI0_B_DATA3		0x160 0x000 ALT1 0x0
-#define VF610_PAD_PTD9__DSPI3_CS1		0x160 0x000 ALT2 0x0
-#define VF610_PAD_PTD9__FB_AD6			0x160 0x000 ALT4 0x0
-#define VF610_PAD_PTD9__SAI1_TX_SYNC		0x160 0x360 ALT6 0x0
-#define VF610_PAD_PTD9__DCU1_B0			0x160 0x000 ALT7 0x0
-#define VF610_PAD_PTD10__GPIO_89		0x164 0x000 ALT0 0x0
-#define VF610_PAD_PTD10__QSPI0_B_DATA2		0x164 0x000 ALT1 0x0
-#define VF610_PAD_PTD10__DSPI3_CS0		0x164 0x000 ALT2 0x0
-#define VF610_PAD_PTD10__FB_AD5			0x164 0x000 ALT4 0x0
-#define VF610_PAD_PTD10__DCU1_B1		0x164 0x000 ALT7 0x0
-#define VF610_PAD_PTD11__GPIO_90		0x168 0x000 ALT0 0x0
-#define VF610_PAD_PTD11__QSPI0_B_DATA1		0x168 0x000 ALT1 0x0
-#define VF610_PAD_PTD11__DSPI3_SIN		0x168 0x000 ALT2 0x0
-#define VF610_PAD_PTD11__FB_AD4			0x168 0x000 ALT4 0x0
-#define VF610_PAD_PTD11__DEBUG_OUT26		0x168 0x000 ALT7 0x0
-#define VF610_PAD_PTD12__GPIO_91		0x16C 0x000 ALT0 0x0
-#define VF610_PAD_PTD12__QSPI0_B_DATA0		0x16C 0x000 ALT1 0x0
-#define VF610_PAD_PTD12__DSPI3_SOUT		0x16C 0x000 ALT2 0x0
-#define VF610_PAD_PTD12__FB_AD3			0x16C 0x000 ALT4 0x0
-#define VF610_PAD_PTD12__DEBUG_OUT27		0x16C 0x000 ALT7 0x0
-#define VF610_PAD_PTD13__GPIO_92		0x170 0x000 ALT0 0x0
-#define VF610_PAD_PTD13__QSPI0_B_DQS		0x170 0x000 ALT1 0x0
-#define VF610_PAD_PTD13__DSPI3_SCK		0x170 0x000 ALT2 0x0
-#define VF610_PAD_PTD13__FB_AD2			0x170 0x000 ALT4 0x0
-#define VF610_PAD_PTD13__DEBUG_OUT28		0x170 0x000 ALT7 0x0
-#define VF610_PAD_PTB23__GPIO_93		0x174 0x000 ALT0 0x0
-#define VF610_PAD_PTB23__SAI0_TX_BCLK		0x174 0x000 ALT1 0x0
-#define VF610_PAD_PTB23__UART1_TX		0x174 0x380 ALT2 0x2
-#define VF610_PAD_PTB23__SRC_RCON18		0x174 0x398 ALT3 0x1
-#define VF610_PAD_PTB23__FB_MUXED_ALE		0x174 0x000 ALT4 0x0
-#define VF610_PAD_PTB23__FB_TS_B		0x174 0x000 ALT5 0x0
-#define VF610_PAD_PTB23__UART3_RTS		0x174 0x000 ALT6 0x0
-#define VF610_PAD_PTB23__DCU1_G3		0x174 0x000 ALT7 0x0
-#define VF610_PAD_PTB24__GPIO_94		0x178 0x000 ALT0 0x0
-#define VF610_PAD_PTB24__SAI0_RX_BCLK		0x178 0x000 ALT1 0x0
-#define VF610_PAD_PTB24__UART1_RX		0x178 0x37C ALT2 0x2
-#define VF610_PAD_PTB24__SRC_RCON19		0x178 0x39C ALT3 0x1
-#define VF610_PAD_PTB24__FB_MUXED_TSIZ0		0x178 0x000 ALT4 0x0
-#define VF610_PAD_PTB24__NF_WE_B		0x178 0x000 ALT5 0x0
-#define VF610_PAD_PTB24__UART3_CTS		0x178 0x000 ALT6 0x0
-#define VF610_PAD_PTB24__DCU1_G4		0x178 0x000 ALT7 0x0
-#define VF610_PAD_PTB25__GPIO_95		0x17C 0x000 ALT0 0x0
-#define VF610_PAD_PTB25__SAI0_RX_DATA		0x17C 0x000 ALT1 0x0
-#define VF610_PAD_PTB25__UART1_RTS		0x17C 0x000 ALT2 0x0
-#define VF610_PAD_PTB25__SRC_RCON20		0x17C 0x3A0 ALT3 0x1
-#define VF610_PAD_PTB25__FB_CS1_B		0x17C 0x000 ALT4 0x0
-#define VF610_PAD_PTB25__NF_CE0_B		0x17C 0x000 ALT5 0x0
-#define VF610_PAD_PTB25__DCU1_G5		0x17C 0x000 ALT7 0x0
-#define VF610_PAD_PTB26__GPIO_96		0x180 0x000 ALT0 0x0
-#define VF610_PAD_PTB26__SAI0_TX_DATA		0x180 0x000 ALT1 0x0
-#define VF610_PAD_PTB26__UART1_CTS		0x180 0x378 ALT2 0x2
-#define VF610_PAD_PTB26__SRC_RCON21		0x180 0x000 ALT3 0x0
-#define VF610_PAD_PTB26__FB_CS0_B		0x180 0x000 ALT4 0x0
-#define VF610_PAD_PTB26__NF_CE1_B		0x180 0x000 ALT5 0x0
-#define VF610_PAD_PTB26__DCU1_G6		0x180 0x000 ALT7 0x0
-#define VF610_PAD_PTB27__GPIO_97		0x184 0x000 ALT0 0x0
-#define VF610_PAD_PTB27__SAI0_RX_SYNC		0x184 0x000 ALT1 0x0
-#define VF610_PAD_PTB27__SRC_RCON22		0x184 0x000 ALT3 0x0
-#define VF610_PAD_PTB27__FB_OE_B		0x184 0x000 ALT4 0x0
-#define VF610_PAD_PTB27__FB_MUXED_TBST_B	0x184 0x000 ALT5 0x0
-#define VF610_PAD_PTB27__NF_RE_B		0x184 0x000 ALT6 0x0
-#define VF610_PAD_PTB27__DCU1_G7		0x184 0x000 ALT7 0x0
-#define VF610_PAD_PTB28__GPIO_98		0x188 0x000 ALT0 0x0
-#define VF610_PAD_PTB28__SAI0_TX_SYNC		0x188 0x000 ALT1 0x0
-#define VF610_PAD_PTB28__SRC_RCON23		0x188 0x000 ALT3 0x0
-#define VF610_PAD_PTB28__FB_RW_B		0x188 0x000 ALT4 0x0
-#define VF610_PAD_PTB28__DCU1_B6		0x188 0x000 ALT7 0x0
-#define VF610_PAD_PTC26__GPIO_99		0x18C 0x000 ALT0 0x0
-#define VF610_PAD_PTC26__SAI1_TX_BCLK		0x18C 0x000 ALT1 0x0
-#define VF610_PAD_PTC26__DSPI0_CS5		0x18C 0x000 ALT2 0x0
-#define VF610_PAD_PTC26__SRC_RCON24		0x18C 0x000 ALT3 0x0
-#define VF610_PAD_PTC26__FB_TA_B		0x18C 0x000 ALT4 0x0
-#define VF610_PAD_PTC26__NF_RB_B		0x18C 0x000 ALT5 0x0
-#define VF610_PAD_PTC26__DCU1_B7		0x18C 0x000 ALT7 0x0
-#define VF610_PAD_PTC27__GPIO_100		0x190 0x000 ALT0 0x0
-#define VF610_PAD_PTC27__SAI1_RX_BCLK		0x190 0x000 ALT1 0x0
-#define VF610_PAD_PTC27__DSPI0_CS4		0x190 0x000 ALT2 0x0
-#define VF610_PAD_PTC27__SRC_RCON25		0x190 0x000 ALT3 0x0
-#define VF610_PAD_PTC27__FB_BE3_B		0x190 0x000 ALT4 0x0
-#define VF610_PAD_PTC27__FB_CS3_B		0x190 0x000 ALT5 0x0
-#define VF610_PAD_PTC27__NF_ALE			0x190 0x000 ALT6 0x0
-#define VF610_PAD_PTC27__DCU1_B2		0x190 0x000 ALT7 0x0
-#define VF610_PAD_PTC28__GPIO_101		0x194 0x000 ALT0 0x0
-#define VF610_PAD_PTC28__SAI1_RX_DATA		0x194 0x000 ALT1 0x0
-#define VF610_PAD_PTC28__DSPI0_CS3		0x194 0x000 ALT2 0x0
-#define VF610_PAD_PTC28__SRC_RCON26		0x194 0x000 ALT3 0x0
-#define VF610_PAD_PTC28__FB_BE2_B		0x194 0x000 ALT4 0x0
-#define VF610_PAD_PTC28__FB_CS2_B		0x194 0x000 ALT5 0x0
-#define VF610_PAD_PTC28__NF_CLE			0x194 0x000 ALT6 0x0
-#define VF610_PAD_PTC28__DCU1_B3		0x194 0x000 ALT7 0x0
-#define VF610_PAD_PTC29__GPIO_102		0x198 0x000 ALT0 0x0
-#define VF610_PAD_PTC29__SAI1_TX_DATA		0x198 0x000 ALT1 0x0
-#define VF610_PAD_PTC29__DSPI0_CS2		0x198 0x000 ALT2 0x0
-#define VF610_PAD_PTC29__SRC_RCON27		0x198 0x000 ALT3 0x0
-#define VF610_PAD_PTC29__FB_BE1_B		0x198 0x000 ALT4 0x0
-#define VF610_PAD_PTC29__FB_MUXED_TSIZE1	0x198 0x000 ALT5 0x0
-#define VF610_PAD_PTC29__DCU1_B4		0x198 0x000 ALT7 0x0
-#define VF610_PAD_PTC30__GPIO_103		0x19C 0x000 ALT0 0x0
-#define VF610_PAD_PTC30__SAI1_RX_SYNC		0x19C 0x000 ALT1 0x0
-#define VF610_PAD_PTC30__DSPI1_CS2		0x19C 0x000 ALT2 0x0
-#define VF610_PAD_PTC30__SRC_RCON28		0x19C 0x000 ALT3 0x0
-#define VF610_PAD_PTC30__FB_MUXED_BE0_B		0x19C 0x000 ALT4 0x0
-#define VF610_PAD_PTC30__FB_TSIZ0		0x19C 0x000 ALT5 0x0
-#define VF610_PAD_PTC30__ADC0_SE5		0x19C 0x000 ALT6 0x0
-#define VF610_PAD_PTC30__DCU1_B5		0x19C 0x000 ALT7 0x0
-#define VF610_PAD_PTC31__GPIO_104		0x1A0 0x000 ALT0 0x0
-#define VF610_PAD_PTC31__SAI1_TX_SYNC		0x1A0 0x360 ALT1 0x1
-#define VF610_PAD_PTC31__SRC_RCON29		0x1A0 0x000 ALT3 0x0
-#define VF610_PAD_PTC31__ADC1_SE5		0x1A0 0x000 ALT6 0x0
-#define VF610_PAD_PTC31__DCU1_B6		0x1A0 0x000 ALT7 0x0
-#define VF610_PAD_PTE0__GPIO_105		0x1A4 0x000 ALT0 0x0
-#define VF610_PAD_PTE0__DCU0_HSYNC		0x1A4 0x000 ALT1 0x0
-#define VF610_PAD_PTE0__SRC_BMODE1		0x1A4 0x000 ALT2 0x0
-#define VF610_PAD_PTE0__LCD0			0x1A4 0x000 ALT4 0x0
-#define VF610_PAD_PTE0__DEBUG_OUT29		0x1A4 0x000 ALT7 0x0
-#define VF610_PAD_PTE1__GPIO_106		0x1A8 0x000 ALT0 0x0
-#define VF610_PAD_PTE1__DCU0_VSYNC		0x1A8 0x000 ALT1 0x0
-#define VF610_PAD_PTE1__SRC_BMODE0		0x1A8 0x000 ALT2 0x0
-#define VF610_PAD_PTE1__LCD1			0x1A8 0x000 ALT4 0x0
-#define VF610_PAD_PTE1__DEBUG_OUT30		0x1A8 0x000 ALT7 0x0
-#define VF610_PAD_PTE2__GPIO_107		0x1AC 0x000 ALT0 0x0
-#define VF610_PAD_PTE2__DCU0_PCLK		0x1AC 0x000 ALT1 0x0
-#define VF610_PAD_PTE2__LCD2			0x1AC 0x000 ALT4 0x0
-#define VF610_PAD_PTE2__DEBUG_OUT31		0x1AC 0x000 ALT7 0x0
-#define VF610_PAD_PTE3__GPIO_108		0x1B0 0x000 ALT0 0x0
-#define VF610_PAD_PTE3__DCU0_TAG		0x1B0 0x000 ALT1 0x0
-#define VF610_PAD_PTE3__LCD3			0x1B0 0x000 ALT4 0x0
-#define VF610_PAD_PTE3__DEBUG_OUT32		0x1B0 0x000 ALT7 0x0
-#define VF610_PAD_PTE4__GPIO_109		0x1B4 0x000 ALT0 0x0
-#define VF610_PAD_PTE4__DCU0_DE			0x1B4 0x000 ALT1 0x0
-#define VF610_PAD_PTE4__LCD4			0x1B4 0x000 ALT4 0x0
-#define VF610_PAD_PTE4__DEBUG_OUT33		0x1B4 0x000 ALT7 0x0
-#define VF610_PAD_PTE5__GPIO_110		0x1B8 0x000 ALT0 0x0
-#define VF610_PAD_PTE5__DCU0_R0			0x1B8 0x000 ALT1 0x0
-#define VF610_PAD_PTE5__LCD5			0x1B8 0x000 ALT4 0x0
-#define VF610_PAD_PTE5__DEBUG_OUT34		0x1B8 0x000 ALT7 0x0
-#define VF610_PAD_PTE6__GPIO_111		0x1BC 0x000 ALT0 0x0
-#define VF610_PAD_PTE6__DCU0_R1			0x1BC 0x000 ALT1 0x0
-#define VF610_PAD_PTE6__LCD6			0x1BC 0x000 ALT4 0x0
-#define VF610_PAD_PTE6__DEBUG_OUT35		0x1BC 0x000 ALT7 0x0
-#define VF610_PAD_PTE7__GPIO_112		0x1C0 0x000 ALT0 0x0
-#define VF610_PAD_PTE7__DCU0_R2			0x1C0 0x000 ALT1 0x0
-#define VF610_PAD_PTE7__SRC_RCON0		0x1C0 0x000 ALT3 0x0
-#define VF610_PAD_PTE7__LCD7			0x1C0 0x000 ALT4 0x0
-#define VF610_PAD_PTE7__DEBUG_OUT36		0x1C0 0x000 ALT7 0x0
-#define VF610_PAD_PTE8__GPIO_113		0x1C4 0x000 ALT0 0x0
-#define VF610_PAD_PTE8__DCU0_R3			0x1C4 0x000 ALT1 0x0
-#define VF610_PAD_PTE8__SRC_RCON1		0x1C4 0x000 ALT3 0x0
-#define VF610_PAD_PTE8__LCD8			0x1C4 0x000 ALT4 0x0
-#define VF610_PAD_PTE8__DEBUG_OUT37		0x1C4 0x000 ALT7 0x0
-#define VF610_PAD_PTE9__GPIO_114		0x1C8 0x000 ALT0 0x0
-#define VF610_PAD_PTE9__DCU0_R4			0x1C8 0x000 ALT1 0x0
-#define VF610_PAD_PTE9__SRC_RCON2		0x1C8 0x000 ALT3 0x0
-#define VF610_PAD_PTE9__LCD9			0x1C8 0x000 ALT4 0x0
-#define VF610_PAD_PTE9__DEBUG_OUT38		0x1C8 0x000 ALT7 0x0
-#define VF610_PAD_PTE10__GPIO_115		0x1CC 0x000 ALT0 0x0
-#define VF610_PAD_PTE10__DCU0_R5		0x1CC 0x000 ALT1 0x0
-#define VF610_PAD_PTE10__SRC_RCON3		0x1CC 0x000 ALT3 0x0
-#define VF610_PAD_PTE10__LCD10			0x1CC 0x000 ALT4 0x0
-#define VF610_PAD_PTE10__DEBUG_OUT39		0x1CC 0x000 ALT7 0x0
-#define VF610_PAD_PTE11__GPIO_116		0x1D0 0x000 ALT0 0x0
-#define VF610_PAD_PTE11__DCU0_R6		0x1D0 0x000 ALT1 0x0
-#define VF610_PAD_PTE11__SRC_RCON4		0x1D0 0x000 ALT3 0x0
-#define VF610_PAD_PTE11__LCD11			0x1D0 0x000 ALT4 0x0
-#define VF610_PAD_PTE11__DEBUG_OUT40		0x1D0 0x000 ALT7 0x0
-#define VF610_PAD_PTE12__GPIO_117		0x1D4 0x000 ALT0 0x0
-#define VF610_PAD_PTE12__DCU0_R7		0x1D4 0x000 ALT1 0x0
-#define VF610_PAD_PTE12__DSPI1_CS3		0x1D4 0x000 ALT2 0x0
-#define VF610_PAD_PTE12__SRC_RCON5		0x1D4 0x000 ALT3 0x0
-#define VF610_PAD_PTE12__LCD12			0x1D4 0x000 ALT4 0x0
-#define VF610_PAD_PTE12__LPT_ALT0		0x1D4 0x000 ALT7 0x0
-#define VF610_PAD_PTE13__GPIO_118		0x1D8 0x000 ALT0 0x0
-#define VF610_PAD_PTE13__DCU0_G0		0x1D8 0x000 ALT1 0x0
-#define VF610_PAD_PTE13__LCD13			0x1D8 0x000 ALT4 0x0
-#define VF610_PAD_PTE13__DEBUG_OUT41		0x1D8 0x000 ALT7 0x0
-#define VF610_PAD_PTE14__GPIO_119		0x1DC 0x000 ALT0 0x0
-#define VF610_PAD_PTE14__DCU0_G1		0x1DC 0x000 ALT1 0x0
-#define VF610_PAD_PTE14__LCD14			0x1DC 0x000 ALT4 0x0
-#define VF610_PAD_PTE14__DEBUG_OUT42		0x1DC 0x000 ALT7 0x0
-#define VF610_PAD_PTE15__GPIO_120		0x1E0 0x000 ALT0 0x0
-#define VF610_PAD_PTE15__DCU0_G2		0x1E0 0x000 ALT1 0x0
-#define VF610_PAD_PTE15__SRC_RCON6		0x1E0 0x000 ALT3 0x0
-#define VF610_PAD_PTE15__LCD15			0x1E0 0x000 ALT4 0x0
-#define VF610_PAD_PTE15__DEBUG_OUT43		0x1E0 0x000 ALT7 0x0
-#define VF610_PAD_PTE16__GPIO_121		0x1E4 0x000 ALT0 0x0
-#define VF610_PAD_PTE16__DCU0_G3		0x1E4 0x000 ALT1 0x0
-#define VF610_PAD_PTE16__SRC_RCON7		0x1E4 0x000 ALT3 0x0
-#define VF610_PAD_PTE16__LCD16			0x1E4 0x000 ALT4 0x0
-#define VF610_PAD_PTE17__GPIO_122		0x1E8 0x000 ALT0 0x0
-#define VF610_PAD_PTE17__DCU0_G4		0x1E8 0x000 ALT1 0x0
-#define VF610_PAD_PTE17__SRC_RCON8		0x1E8 0x000 ALT3 0x0
-#define VF610_PAD_PTE17__LCD17			0x1E8 0x000 ALT4 0x0
-#define VF610_PAD_PTE18__GPIO_123		0x1EC 0x000 ALT0 0x0
-#define VF610_PAD_PTE18__DCU0_G5		0x1EC 0x000 ALT1 0x0
-#define VF610_PAD_PTE18__SRC_RCON9		0x1EC 0x000 ALT3 0x0
-#define VF610_PAD_PTE18__LCD18			0x1EC 0x000 ALT4 0x0
-#define VF610_PAD_PTE19__GPIO_124		0x1F0 0x000 ALT0 0x0
-#define VF610_PAD_PTE19__DCU0_G6		0x1F0 0x000 ALT1 0x0
-#define VF610_PAD_PTE19__SRC_RCON10		0x1F0 0x000 ALT3 0x0
-#define VF610_PAD_PTE19__LCD19			0x1F0 0x000 ALT4 0x0
-#define VF610_PAD_PTE19__I2C0_SCL		0x1F0 0x33C ALT5 0x3
-#define VF610_PAD_PTE20__GPIO_125		0x1F4 0x000 ALT0 0x0
-#define VF610_PAD_PTE20__DCU0_G7		0x1F4 0x000 ALT1 0x0
-#define VF610_PAD_PTE20__SRC_RCON11		0x1F4 0x000 ALT3 0x0
-#define VF610_PAD_PTE20__LCD20			0x1F4 0x000 ALT4 0x0
-#define VF610_PAD_PTE20__I2C0_SDA		0x1F4 0x340 ALT5 0x3
-#define VF610_PAD_PTE20__EWM_IN			0x1F4 0x000 ALT7 0x0
-#define VF610_PAD_PTE21__GPIO_126		0x1F8 0x000 ALT0 0x0
-#define VF610_PAD_PTE21__DCU0_B0		0x1F8 0x000 ALT1 0x0
-#define VF610_PAD_PTE21__LCD21			0x1F8 0x000 ALT4 0x0
-#define VF610_PAD_PTE22__GPIO_127		0x1FC 0x000 ALT0 0x0
-#define VF610_PAD_PTE22__DCU0_B1		0x1FC 0x000 ALT1 0x0
-#define VF610_PAD_PTE22__LCD22			0x1FC 0x000 ALT4 0x0
-#define VF610_PAD_PTE23__GPIO_128		0x200 0x000 ALT0 0x0
-#define VF610_PAD_PTE23__DCU0_B2		0x200 0x000 ALT1 0x0
-#define VF610_PAD_PTE23__SRC_RCON12		0x200 0x000 ALT3 0x0
-#define VF610_PAD_PTE23__LCD23			0x200 0x000 ALT4 0x0
-#define VF610_PAD_PTE24__GPIO_129		0x204 0x000 ALT0 0x0
-#define VF610_PAD_PTE24__DCU0_B3		0x204 0x000 ALT1 0x0
-#define VF610_PAD_PTE24__SRC_RCON13		0x204 0x000 ALT3 0x0
-#define VF610_PAD_PTE24__LCD24			0x204 0x000 ALT4 0x0
-#define VF610_PAD_PTE25__GPIO_130		0x208 0x000 ALT0 0x0
-#define VF610_PAD_PTE25__DCU0_B4		0x208 0x000 ALT1 0x0
-#define VF610_PAD_PTE25__SRC_RCON14		0x208 0x000 ALT3 0x0
-#define VF610_PAD_PTE25__LCD25			0x208 0x000 ALT4 0x0
-#define VF610_PAD_PTE26__GPIO_131		0x20C 0x000 ALT0 0x0
-#define VF610_PAD_PTE26__DCU0_B5		0x20C 0x000 ALT1 0x0
-#define VF610_PAD_PTE26__SRC_RCON15		0x20C 0x000 ALT3 0x0
-#define VF610_PAD_PTE26__LCD26			0x20C 0x000 ALT4 0x0
-#define VF610_PAD_PTE27__GPIO_132		0x210 0x000 ALT0 0x0
-#define VF610_PAD_PTE27__DCU0_B6		0x210 0x000 ALT1 0x0
-#define VF610_PAD_PTE27__SRC_RCON16		0x210 0x000 ALT3 0x0
-#define VF610_PAD_PTE27__LCD27			0x210 0x000 ALT4 0x0
-#define VF610_PAD_PTE27__I2C1_SCL		0x210 0x344 ALT5 0x3
-#define VF610_PAD_PTE28__GPIO_133		0x214 0x000 ALT0 0x0
-#define VF610_PAD_PTE28__DCU0_B7		0x214 0x000 ALT1 0x0
-#define VF610_PAD_PTE28__SRC_RCON17		0x214 0x000 ALT3 0x0
-#define VF610_PAD_PTE28__LCD28			0x214 0x000 ALT4 0x0
-#define VF610_PAD_PTE28__I2C1_SDA		0x214 0x348 ALT5 0x3
-#define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
-#define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
-#define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
-
-#endif
diff --git a/src/arm/vf610-twr.dts b/src/arm/vf610-twr.dts
deleted file mode 100644
index b8a5e8c68f06..000000000000
--- a/src/arm/vf610-twr.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "VF610 Tower Board";
-	compatible = "fsl,vf610-twr", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP1,115200";
-	};
-
-	memory {
-		reg = <0x80000000 0x8000000>;
-	};
-
-	clocks {
-		audio_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24576000>;
-		};
-
-		enet_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vcc_3v3_mcu: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vcc_3v3_mcu";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			master-clkdir-out;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&adc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_ad5>;
-	vref-supply = <&reg_vcc_3v3_mcu>;
-	status = "okay";
-};
-
-&dspi0 {
-	bus-num = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0>;
-	status = "okay";
-
-	sflash: at26df081a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at26df081a";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&fec0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec0>;
-	status = "okay";
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-	       #sound-dai-cells = <0>;
-	       compatible = "fsl,sgtl5000";
-	       reg = <0x0a>;
-	       VDDA-supply = <&reg_3p3v>;
-	       VDDIO-supply = <&reg_3p3v>;
-	       clocks = <&clks VF610_CLK_SAI2>;
-       };
-};
-
-&iomuxc {
-	vf610-twr {
-		pinctrl_adc0_ad5: adc0ad5grp {
-			fsl,pins = <
-				VF610_PAD_PTC30__ADC0_SE5		0xa1
-			>;
-		};
-
-		pinctrl_dspi0: dspi0grp {
-			fsl,pins = <
-				VF610_PAD_PTB19__DSPI0_CS0		0x1182
-				VF610_PAD_PTB20__DSPI0_SIN		0x1181
-				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
-				VF610_PAD_PTB22__DSPI0_SCK		0x1182
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTA7__GPIO_134	0x219d
-			>;
-		};
-
-		pinctrl_fec0: fec0grp {
-			fsl,pins = <
-				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
-				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
-				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
-				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
-				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
-				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
-				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
-				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
-				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
-				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_i2c0: i2c0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__I2C0_SCL		0x30d3
-				VF610_PAD_PTB15__I2C0_SDA		0x30d3
-			>;
-		};
-
-		pinctrl_pwm0: pwm0grp {
-			fsl,pins = <
-				VF610_PAD_PTB0__FTM0_CH0		0x1582
-				VF610_PAD_PTB1__FTM0_CH1		0x1582
-				VF610_PAD_PTB2__FTM0_CH2		0x1582
-				VF610_PAD_PTB3__FTM0_CH3		0x1582
-				VF610_PAD_PTB6__FTM0_CH6		0x1582
-				VF610_PAD_PTB7__FTM0_CH7		0x1582
-			>;
-		};
-
-		pinctrl_sai2: sai2grp {
-			fsl,pins = <
-				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
-				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
-				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
-				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
-				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
-				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
-				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-	};
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0>;
-	status = "okay";
-};
-
-&sai2 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/src/arm/vt8500-bv07.dts b/src/arm/vt8500-bv07.dts
deleted file mode 100644
index 87f33310e2bc..000000000000
--- a/src/arm/vt8500-bv07.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "vt8500.dtsi"
-
-/ {
-	model = "Benign BV07 Netbook";
-};
-
-&fb {
-	bits-per-pixel = <16>;
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/vt8500.dtsi b/src/arm/vt8500.dtsi
deleted file mode 100644
index 1929ad390d88..000000000000
--- a/src/arm/vt8500.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * vt8500.dtsi - Device tree file for VIA VT8500 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "via,vt8500";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		intc: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "via,vt8500-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <1>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <2>;
-				};
-
-				clkuart2: uart2 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <3>;
-				};
-
-				clkuart3: uart3 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <4>;
-				};
-			};
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <43>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <43>;
-		};
-
-		fb: fb@d8050800 {
-			compatible = "via,vt8500-fb";
-			reg = <0xd800e400 0x400>;
-			interrupts = <12>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-		uart2: serial@d8210000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8210000 0x1040>;
-			interrupts = <47>;
-			clocks = <&clkuart2>;
-			status = "disabled";
-		};
-
-		uart3: serial@d82c0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82c0000 0x1040>;
-			interrupts = <50>;
-			clocks = <&clkuart3>;
-			status = "disabled";
-		};
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		ethernet@d8004000 {
-			compatible = "via,vt8500-rhine";
-			reg = <0xd8004000 0x100>;
-			interrupts = <10>;
-		};
-	};
-};
diff --git a/src/arm/wm8505-ref.dts b/src/arm/wm8505-ref.dts
deleted file mode 100644
index e3e6b9eb09d0..000000000000
--- a/src/arm/wm8505-ref.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8505.dtsi"
-
-/ {
-	model = "Wondermedia WM8505 Netbook";
-};
-
-&fb {
-	bits-per-pixel = <32>;
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8505.dtsi b/src/arm/wm8505.dtsi
deleted file mode 100644
index a1a854b8a454..000000000000
--- a/src/arm/wm8505.dtsi
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8505";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
- 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
- 	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8505-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x20c>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x350>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <1>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <2>;
-				};
-
-				clkuart2: uart2 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <3>;
-				};
-
-				clkuart3: uart3 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <4>;
-				};
-
-				clkuart4: uart4 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <22>;
-				};
-
-				clkuart5: uart5 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <23>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x328>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x254>;
-					enable-bit = <18>;
-				};
-			};
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007100 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007100 0x200>;
-			interrupts = <1>;
-		};
-
-		uhci@d8007300 {
-			compatible = "platform-uhci";
-			reg = <0xd8007300 0x200>;
-			interrupts = <0>;
-		};
-
-		fb: fb@d8050800 {
-			compatible = "wm,wm8505-fb";
-			reg = <0xd8050800 0x200>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-		uart2: serial@d8210000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8210000 0x1040>;
-			interrupts = <47>;
-			clocks = <&clkuart2>;
-			status = "disabled";
-		};
-
-		uart3: serial@d82c0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82c0000 0x1040>;
-			interrupts = <50>;
-			clocks = <&clkuart3>;
-			status = "disabled";
-		};
-
-		uart4: serial@d8370000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8370000 0x1040>;
-			interrupts = <31>;
-			clocks = <&clkuart4>;
-			status = "disabled";
-		};
-
-		uart5: serial@d8380000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8380000 0x1040>;
-			interrupts = <30>;
-			clocks = <&clkuart5>;
-			status = "disabled";
-		};
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		sdhc@d800a000 {
-			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
-			clocks = <&clksdhc>;
-			bus-width = <4>;
-		};
-	};
-};
diff --git a/src/arm/wm8650-mid.dts b/src/arm/wm8650-mid.dts
deleted file mode 100644
index dd0d1b602388..000000000000
--- a/src/arm/wm8650-mid.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8650.dtsi"
-
-/ {
-	model = "Wondermedia WM8650-MID Tablet";
-};
-
-&fb {
-	bits-per-pixel = <16>;
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8650.dtsi b/src/arm/wm8650.dtsi
deleted file mode 100644
index b1c59a766a13..000000000000
--- a/src/arm/wm8650.dtsi
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8650";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
- 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8650-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x20c>;
-				};
-
-				plle: plle {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x210>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x320>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
- 					#clock-cells = <0>;
- 					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <1>;
- 				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <2>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x328>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x254>;
-					enable-bit = <18>;
-				};
-			};
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <43>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <43>;
-		};
-
-		fb: fb@d8050800 {
-			compatible = "wm,wm8505-fb";
-			reg = <0xd8050800 0x200>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		ethernet@d8004000 {
-			compatible = "via,vt8500-rhine";
-			reg = <0xd8004000 0x100>;
-			interrupts = <10>;
-		};
-	};
-};
diff --git a/src/arm/wm8750-apc8750.dts b/src/arm/wm8750-apc8750.dts
deleted file mode 100644
index 37e4a408bf39..000000000000
--- a/src/arm/wm8750-apc8750.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * wm8750-apc8750.dts
- *  - Device tree file for VIA APC8750
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8750.dtsi"
-
-/ {
-	model = "VIA APC8750";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c>;
-
-	i2c: i2c {
-		wm,pins = <168 169 170 171>;
-		wm,function = <2>;	/* alt */
-		wm,pull = <2>;	/* pull-up */
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8750.dtsi b/src/arm/wm8750.dtsi
deleted file mode 100644
index 557a9c2ace49..000000000000
--- a/src/arm/wm8750.dtsi
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8750";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm1176ej-s";
-		};
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8750-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x20C>;
-				};
-
-				plle: plle {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x210>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x320>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <24>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <25>;
-				};
-
-                                clkuart2: uart2 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <26>;
-                                };
-
-                                clkuart3: uart3 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <27>;
-                                };
-
-                                clkuart4: uart4 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <28>;
-                                };
-
-                                clkuart5: uart5 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <29>;
-                                };
-
-				clkpwm: pwm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x350>;
-					enable-reg = <0x250>;
-					enable-bit = <17>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x330>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x250>;
-					enable-bit = <0>;
-				};
-
-				clki2c0: i2c0clk {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x3A0>;
-					enable-reg = <0x250>;
-					enable-bit = <8>;
-				};
-
-				clki2c1: i2c1clk {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x3A4>;
-					enable-reg = <0x250>;
-					enable-bit = <9>;
-				};
-			};
-		};
-
-		pwm: pwm@d8220000 {
-			#pwm-cells = <3>;
-			compatible = "via,vt8500-pwm";
-			reg = <0xd8220000 0x100>;
-			clocks = <&clkpwm>;
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8008d00 {
-			compatible = "platform-uhci";
-			reg = <0xd8008d00 0x200>;
-			interrupts = <26>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-                uart2: serial@d8210000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8210000 0x1040>;
-                        interrupts = <47>;
-                        clocks = <&clkuart2>;
-			status = "disabled";
-                };
-
-                uart3: serial@d82c0000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd82c0000 0x1040>;
-                        interrupts = <50>;
-                        clocks = <&clkuart3>;
-			status = "disabled";
-                };
-
-                uart4: serial@d8370000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8370000 0x1040>;
-                        interrupts = <30>;
-                        clocks = <&clkuart4>;
-			status = "disabled";
-                };
-
-                uart5: serial@d8380000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8380000 0x1040>;
-                        interrupts = <43>;
-                        clocks = <&clkuart5>;
-			status = "disabled";
-                };
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		sdhc@d800a000 {
-			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
-			clocks = <&clksdhc>;
-			bus-width = <4>;
-			sdon-inverted;
-		};
-
-		i2c_0: i2c@d8280000 {
-			compatible = "wm,wm8505-i2c";
-			reg = <0xd8280000 0x1000>;
-			interrupts = <19>;
-			clocks = <&clki2c0>;
-			clock-frequency = <400000>;
-		};
-
-		i2c_1: i2c@d8320000 {
-			compatible = "wm,wm8505-i2c";
-			reg = <0xd8320000 0x1000>;
-			interrupts = <18>;
-			clocks = <&clki2c1>;
-			clock-frequency = <400000>;
-		};
-	};
-};
diff --git a/src/arm/wm8850-w70v2.dts b/src/arm/wm8850-w70v2.dts
deleted file mode 100644
index 7a563d2523b0..000000000000
--- a/src/arm/wm8850-w70v2.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * wm8850-w70v2.dts
- *  - Device tree file for Wondermedia WM8850 Tablet
- *  - 'W70-V2' mainboard
- *  - HongLianYing 'HLY070ML268-21A' 7" LCD panel
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8850.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Wondermedia WM8850-W70v2 Tablet";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-
-		brightness-levels = <0 40 60 80 100 130 190 255>;
-		default-brightness-level = <5>;
-	};
-};
-
-&fb {
-	bits-per-pixel = <16>;
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8850.dtsi b/src/arm/wm8850.dtsi
deleted file mode 100644
index 8fbccfbe75f3..000000000000
--- a/src/arm/wm8850.dtsi
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8850";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x0>;
-		};
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8850-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x20c>;
-				};
-
-				plle: plle {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x210>;
-				};
-
-				pllf: pllf {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x214>;
-				};
-
-				pllg: pllg {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x218>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x320>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <24>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <25>;
-				};
-
-                                clkuart2: uart2 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <26>;
-                                };
-
-                                clkuart3: uart3 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <27>;
-                                };
-
-				clkpwm: pwm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x350>;
-					enable-reg = <0x250>;
-					enable-bit = <17>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x330>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x250>;
-					enable-bit = <0>;
-				};
-			};
-		};
-
-		fb: fb@d8051700 {
-			compatible = "wm,wm8505-fb";
-			reg = <0xd8051700 0x200>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		pwm: pwm@d8220000 {
-			#pwm-cells = <3>;
-			compatible = "via,vt8500-pwm";
-			reg = <0xd8220000 0x100>;
-			clocks = <&clkpwm>;
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8008d00 {
-			compatible = "platform-uhci";
-			reg = <0xd8008d00 0x200>;
-			interrupts = <26>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-                uart2: serial@d8210000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8210000 0x1040>;
-                        interrupts = <47>;
-                        clocks = <&clkuart2>;
-			status = "disabled";
-                };
-
-                uart3: serial@d82c0000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd82c0000 0x1040>;
-                        interrupts = <50>;
-                        clocks = <&clkuart3>;
-			status = "disabled";
-                };
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		sdhc@d800a000 {
-			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
-			clocks = <&clksdhc>;
-			bus-width = <4>;
-			sdon-inverted;
-		};
-
-		ethernet@d8004000 {
-			compatible = "via,vt8500-rhine";
-			reg = <0xd8004000 0x100>;
-			interrupts = <10>;
-                };
-	};
-};
diff --git a/src/arm/xenvm-4.2.dts b/src/arm/xenvm-4.2.dts
deleted file mode 100644
index 336915151398..000000000000
--- a/src/arm/xenvm-4.2.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Xen Virtual Machine for unprivileged guests
- *
- * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU)
- * Cortex-A15 MPCore (V2P-CA15)
- *
- */
-
-/dts-v1/;
-
-/ {
-	model = "XENVM-4.2";
-	compatible = "xen,xenvm-4.2", "xen,xenvm";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen {
-		/* this field is going to be adjusted by the hypervisor */
-		bootargs = "console=hvc0 root=/dev/xvda";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-
-	psci {
-		compatible      = "arm,psci";
-		method          = "hvc";
-		cpu_off         = <1>;
-		cpu_on          = <2>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		/* this field is going to be adjusted by the hypervisor */
-		reg = <0 0x80000000 0 0x08000000>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x100>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	hypervisor {
-		compatible = "xen,xen-4.2", "xen,xen";
-		/* this field is going to be adjusted by the hypervisor */
-		reg = <0 0xb0000000 0 0x20000>;
-		/* this field is going to be adjusted by the hypervisor */
-		interrupts = <1 15 0xf08>;
-	};
-
-	motherboard {
-		arm,v2m-memory-map = "rs1";
-	};
-};
diff --git a/src/arm/zynq-7000.dtsi b/src/arm/zynq-7000.dtsi
deleted file mode 100644
index 6cc83d4c6c76..000000000000
--- a/src/arm/zynq-7000.dtsi
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- *  Copyright (C) 2011 - 2014 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "xlnx,zynq-7000";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&clkc 3>;
-			clock-latency = <1000>;
-			cpu0-supply = <&regulator_vccpint>;
-			operating-points = <
-				/* kHz    uV */
-				666667  1000000
-				333334  1000000
-				222223  1000000
-			>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&clkc 3>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 5 4>, <0 6 4>;
-		interrupt-parent = <&intc>;
-		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
-	};
-
-	regulator_vccpint: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCCPINT";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	amba {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-
-		adc@f8007100 {
-			compatible = "xlnx,zynq-xadc-1.00.a";
-			reg = <0xf8007100 0x20>;
-			interrupts = <0 7 4>;
-			interrupt-parent = <&intc>;
-			clocks = <&clkc 12>;
-		};
-
-		can0: can@e0008000 {
-			compatible = "xlnx,zynq-can-1.0";
-			status = "disabled";
-			clocks = <&clkc 19>, <&clkc 36>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0008000 0x1000>;
-			interrupts = <0 28 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-
-		can1: can@e0009000 {
-			compatible = "xlnx,zynq-can-1.0";
-			status = "disabled";
-			clocks = <&clkc 20>, <&clkc 37>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0009000 0x1000>;
-			interrupts = <0 51 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-
-		gpio0: gpio@e000a000 {
-			compatible = "xlnx,zynq-gpio-1.0";
-			#gpio-cells = <2>;
-			clocks = <&clkc 42>;
-			gpio-controller;
-			interrupt-parent = <&intc>;
-			interrupts = <0 20 4>;
-			reg = <0xe000a000 0x1000>;
-		};
-
-		i2c0: i2c@e0004000 {
-			compatible = "cdns,i2c-r1p10";
-			status = "disabled";
-			clocks = <&clkc 38>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 25 4>;
-			reg = <0xe0004000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@e0005000 {
-			compatible = "cdns,i2c-r1p10";
-			status = "disabled";
-			clocks = <&clkc 39>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 48 4>;
-			reg = <0xe0005000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@f8f01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0xF8F01000 0x1000>,
-			      <0xF8F00100 0x100>;
-		};
-
-		L2: cache-controller {
-			compatible = "arm,pl310-cache";
-			reg = <0xF8F02000 0x1000>;
-			arm,data-latency = <3 2 2>;
-			arm,tag-latency = <2 2 2>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		uart0: serial@e0000000 {
-			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
-			status = "disabled";
-			clocks = <&clkc 23>, <&clkc 40>;
-			clock-names = "uart_clk", "pclk";
-			reg = <0xE0000000 0x1000>;
-			interrupts = <0 27 4>;
-		};
-
-		uart1: serial@e0001000 {
-			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
-			status = "disabled";
-			clocks = <&clkc 24>, <&clkc 41>;
-			clock-names = "uart_clk", "pclk";
-			reg = <0xE0001000 0x1000>;
-			interrupts = <0 50 4>;
-		};
-
-		spi0: spi@e0006000 {
-			compatible = "xlnx,zynq-spi-r1p6";
-			reg = <0xe0006000 0x1000>;
-			status = "disabled";
-			interrupt-parent = <&intc>;
-			interrupts = <0 26 4>;
-			clocks = <&clkc 25>, <&clkc 34>;
-			clock-names = "ref_clk", "pclk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@e0007000 {
-			compatible = "xlnx,zynq-spi-r1p6";
-			reg = <0xe0007000 0x1000>;
-			status = "disabled";
-			interrupt-parent = <&intc>;
-			interrupts = <0 49 4>;
-			clocks = <&clkc 26>, <&clkc 35>;
-			clock-names = "ref_clk", "pclk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		gem0: ethernet@e000b000 {
-			compatible = "cdns,gem";
-			reg = <0xe000b000 0x4000>;
-			status = "disabled";
-			interrupts = <0 22 4>;
-			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
-			clock-names = "pclk", "hclk", "tx_clk";
-		};
-
-		gem1: ethernet@e000c000 {
-			compatible = "cdns,gem";
-			reg = <0xe000c000 0x4000>;
-			status = "disabled";
-			interrupts = <0 45 4>;
-			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
-			clock-names = "pclk", "hclk", "tx_clk";
-		};
-
-		sdhci0: sdhci@e0100000 {
-			compatible = "arasan,sdhci-8.9a";
-			status = "disabled";
-			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&clkc 21>, <&clkc 32>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 24 4>;
-			reg = <0xe0100000 0x1000>;
-		} ;
-
-		sdhci1: sdhci@e0101000 {
-			compatible = "arasan,sdhci-8.9a";
-			status = "disabled";
-			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&clkc 22>, <&clkc 33>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 47 4>;
-			reg = <0xe0101000 0x1000>;
-		} ;
-
-		slcr: slcr@f8000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
-			reg = <0xF8000000 0x1000>;
-			ranges;
-			clkc: clkc@100 {
-				#clock-cells = <1>;
-				compatible = "xlnx,ps7-clkc";
-				ps-clk-frequency = <33333333>;
-				fclk-enable = <0>;
-				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
-						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
-						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
-						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
-						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
-						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
-						"gem1_aper", "sdio0_aper", "sdio1_aper",
-						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
-						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
-						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
-						"dbg_trc", "dbg_apb";
-				reg = <0x100 0x100>;
-			};
-		};
-
-		dmac_s: dmac@f8003000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xf8003000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 13 4>,
-			             <0 14 4>, <0 15 4>,
-			             <0 16 4>, <0 17 4>,
-			             <0 40 4>, <0 41 4>,
-			             <0 42 4>, <0 43 4>;
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <4>;
-			clocks = <&clkc 27>;
-			clock-names = "apb_pclk";
-		};
-
-		devcfg: devcfg@f8007000 {
-			compatible = "xlnx,zynq-devcfg-1.0";
-			reg = <0xf8007000 0x100>;
-		} ;
-
-		global_timer: timer@f8f00200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0xf8f00200 0x20>;
-			interrupts = <1 11 0x301>;
-			interrupt-parent = <&intc>;
-			clocks = <&clkc 4>;
-		};
-
-		ttc0: timer@f8001000 {
-			interrupt-parent = <&intc>;
-			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
-			compatible = "cdns,ttc";
-			clocks = <&clkc 6>;
-			reg = <0xF8001000 0x1000>;
-		};
-
-		ttc1: timer@f8002000 {
-			interrupt-parent = <&intc>;
-			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
-			compatible = "cdns,ttc";
-			clocks = <&clkc 6>;
-			reg = <0xF8002000 0x1000>;
-		};
-
-		scutimer: timer@f8f00600 {
-			interrupt-parent = <&intc>;
-			interrupts = <1 13 0x301>;
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xf8f00600 0x20>;
-			clocks = <&clkc 4>;
-		} ;
-	};
-};
diff --git a/src/arm/zynq-parallella.dts b/src/arm/zynq-parallella.dts
deleted file mode 100644
index 41afd9da6876..000000000000
--- a/src/arm/zynq-parallella.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (c) 2014 SUSE LINUX Products GmbH
- *
- * Derived from zynq-zed.dts:
- *
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Adapteva Parallella Board";
-	compatible = "adapteva,parallella", "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
-		linux,stdout-path = "/amba/serial@e0001000";
-	};
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethernet_phy>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ethernet_phy: ethernet-phy@0 {
-		/* Marvell 88E1318 */
-		compatible = "ethernet-phy-id0141.0e90",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
-		                   <0x3 0x11 0xfff0 0xa>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&sdhci1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/zynq-zc702.dts b/src/arm/zynq-zc702.dts
deleted file mode 100644
index 835c3089c61c..000000000000
--- a/src/arm/zynq-zc702.dts
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Zynq ZC702 Development Board";
-	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
-	};
-
-};
-
-&can0 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	i2cswitch@74 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x74>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			si570: clock-generator@5d {
-				#clock-cells = <0>;
-				compatible = "silabs,si570";
-				temperature-stability = <50>;
-				reg = <0x5d>;
-				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@54 {
-				compatible = "at,24c08";
-				reg = <0x54>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			gpio@21 {
-				compatible = "ti,tca6416";
-				reg = <0x21>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-			hwmon@52 {
-				compatible = "ti,ucd9248";
-				reg = <52>;
-			};
-			hwmon@53 {
-				compatible = "ti,ucd9248";
-				reg = <53>;
-			};
-			hwmon@54 {
-				compatible = "ti,ucd9248";
-				reg = <54>;
-			};
-		};
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/zynq-zc706.dts b/src/arm/zynq-zc706.dts
deleted file mode 100644
index 4cc9913078cd..000000000000
--- a/src/arm/zynq-zc706.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Zynq ZC706 Development Board";
-	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
-	};
-
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	i2cswitch@74 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x74>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			si570: clock-generator@5d {
-				#clock-cells = <0>;
-				compatible = "silabs,si570";
-				temperature-stability = <50>;
-				reg = <0x5d>;
-				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@54 {
-				compatible = "at,24c08";
-				reg = <0x54>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			gpio@21 {
-				compatible = "ti,tca6416";
-				reg = <0x21>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-			ucd90120@65 {
-				compatible = "ti,ucd90120";
-				reg = <0x65>;
-			};
-		};
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/zynq-zed.dts b/src/arm/zynq-zed.dts
deleted file mode 100644
index 82d7ef1a9a9c..000000000000
--- a/src/arm/zynq-zed.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Zynq Zed Development Board";
-	compatible = "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
-	};
-
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};