1 files changed, 2707 insertions, 0 deletions

diff --git a/sys/dev/ral/rt2560.c b/sys/dev/ral/rt2560.c
new file mode 100644
index 000000000000..76f5cc2ba05c
--- /dev/null
+++ b/sys/dev/ral/rt2560.c
@@ -0,0 +1,2707 @@
+/*	$FreeBSD$	*/
+
+/*-
+ * Copyright (c) 2005, 2006
+ *	Damien Bergamini <damien.bergamini@free.fr>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*-
+ * Ralink Technology RT2560 chipset driver
+ * http://www.ralinktech.com/
+ */
+
+#include <sys/param.h>
+#include <sys/sysctl.h>
+#include <sys/sockio.h>
+#include <sys/mbuf.h>
+#include <sys/kernel.h>
+#include <sys/socket.h>
+#include <sys/systm.h>
+#include <sys/malloc.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+#include <sys/endian.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+#include <machine/clock.h>
+#include <sys/rman.h>
+
+#include <net/bpf.h>
+#include <net/if.h>
+#include <net/if_arp.h>
+#include <net/ethernet.h>
+#include <net/if_dl.h>
+#include <net/if_media.h>
+#include <net/if_types.h>
+
+#include <net80211/ieee80211_var.h>
+#include <net80211/ieee80211_radiotap.h>
+
+#include <netinet/in.h>
+#include <netinet/in_systm.h>
+#include <netinet/in_var.h>
+#include <netinet/ip.h>
+#include <netinet/if_ether.h>
+
+#include <dev/rt61/if_ralrate.h>
+#include <dev/rt61/rt2560reg.h>
+#include <dev/rt61/rt2560var.h>
+
+#ifdef RAL_DEBUG
+#define DPRINTF(x)	do { if (ral_debug > 0) printf x; } while (0)
+#define DPRINTFN(n, x)	do { if (ral_debug >= (n)) printf x; } while (0)
+extern int ral_debug;
+#else
+#define DPRINTF(x)
+#define DPRINTFN(n, x)
+#endif
+
+static void		rt2560_dma_map_addr(void *, bus_dma_segment_t *, int,
+			    int);
+static int		rt2560_alloc_tx_ring(struct rt2560_softc *,
+			    struct rt2560_tx_ring *, int);
+static void		rt2560_reset_tx_ring(struct rt2560_softc *,
+			    struct rt2560_tx_ring *);
+static void		rt2560_free_tx_ring(struct rt2560_softc *,
+			    struct rt2560_tx_ring *);
+static int		rt2560_alloc_rx_ring(struct rt2560_softc *,
+			    struct rt2560_rx_ring *, int);
+static void		rt2560_reset_rx_ring(struct rt2560_softc *,
+			    struct rt2560_rx_ring *);
+static void		rt2560_free_rx_ring(struct rt2560_softc *,
+			    struct rt2560_rx_ring *);
+static struct		ieee80211_node *rt2560_node_alloc(
+			    struct ieee80211_node_table *);
+static int		rt2560_media_change(struct ifnet *);
+static void		rt2560_next_scan(void *);
+static void		rt2560_iter_func(void *, struct ieee80211_node *);
+static void		rt2560_update_rssadapt(void *);
+static int		rt2560_newstate(struct ieee80211com *,
+			    enum ieee80211_state, int);
+static uint16_t		rt2560_eeprom_read(struct rt2560_softc *, uint8_t);
+static void		rt2560_encryption_intr(struct rt2560_softc *);
+static void		rt2560_tx_intr(struct rt2560_softc *);
+static void		rt2560_prio_intr(struct rt2560_softc *);
+static void		rt2560_decryption_intr(struct rt2560_softc *);
+static void		rt2560_rx_intr(struct rt2560_softc *);
+static void		rt2560_beacon_expire(struct rt2560_softc *);
+static void		rt2560_wakeup_expire(struct rt2560_softc *);
+static uint8_t		rt2560_rxrate(struct rt2560_rx_desc *);
+static int		rt2560_ack_rate(struct ieee80211com *, int);
+static uint16_t		rt2560_txtime(int, int, uint32_t);
+static uint8_t		rt2560_plcp_signal(int);
+static void		rt2560_setup_tx_desc(struct rt2560_softc *,
+			    struct rt2560_tx_desc *, uint32_t, int, int, int,
+			    bus_addr_t);
+static int		rt2560_tx_bcn(struct rt2560_softc *, struct mbuf *,
+			    struct ieee80211_node *);
+static int		rt2560_tx_mgt(struct rt2560_softc *, struct mbuf *,
+			    struct ieee80211_node *);
+static struct		mbuf *rt2560_get_rts(struct rt2560_softc *,
+			    struct ieee80211_frame *, uint16_t);
+static int		rt2560_tx_data(struct rt2560_softc *, struct mbuf *,
+			    struct ieee80211_node *);
+static void		rt2560_start(struct ifnet *);
+static void		rt2560_watchdog(struct ifnet *);
+static int		rt2560_reset(struct ifnet *);
+static int		rt2560_ioctl(struct ifnet *, u_long, caddr_t);
+static void		rt2560_bbp_write(struct rt2560_softc *, uint8_t,
+			    uint8_t);
+static uint8_t		rt2560_bbp_read(struct rt2560_softc *, uint8_t);
+static void		rt2560_rf_write(struct rt2560_softc *, uint8_t,
+			    uint32_t);
+static void		rt2560_set_chan(struct rt2560_softc *,
+			    struct ieee80211_channel *);
+#if 0
+static void		rt2560_disable_rf_tune(struct rt2560_softc *);
+#endif
+static void		rt2560_enable_tsf_sync(struct rt2560_softc *);
+static void		rt2560_update_plcp(struct rt2560_softc *);
+static void		rt2560_update_slot(struct ifnet *);
+static void		rt2560_set_basicrates(struct rt2560_softc *);
+static void		rt2560_update_led(struct rt2560_softc *, int, int);
+static void		rt2560_set_bssid(struct rt2560_softc *, uint8_t *);
+static void		rt2560_set_macaddr(struct rt2560_softc *, uint8_t *);
+static void		rt2560_get_macaddr(struct rt2560_softc *, uint8_t *);
+static void		rt2560_update_promisc(struct rt2560_softc *);
+static const char	*rt2560_get_rf(int);
+static void		rt2560_read_eeprom(struct rt2560_softc *);
+static int		rt2560_bbp_init(struct rt2560_softc *);
+static void		rt2560_set_txantenna(struct rt2560_softc *, int);
+static void		rt2560_set_rxantenna(struct rt2560_softc *, int);
+static void		rt2560_init(void *);
+static void		rt2560_stop(void *);
+
+/*
+ * Supported rates for 802.11a/b/g modes (in 500Kbps unit).
+ */
+static const struct ieee80211_rateset rt2560_rateset_11a =
+	{ 8, { 12, 18, 24, 36, 48, 72, 96, 108 } };
+
+static const struct ieee80211_rateset rt2560_rateset_11b =
+	{ 4, { 2, 4, 11, 22 } };
+
+static const struct ieee80211_rateset rt2560_rateset_11g =
+	{ 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } };
+
+static const struct {
+	uint32_t	reg;
+	uint32_t	val;
+} rt2560_def_mac[] = {
+	RT2560_DEF_MAC
+};
+
+static const struct {
+	uint8_t	reg;
+	uint8_t	val;
+} rt2560_def_bbp[] = {
+	RT2560_DEF_BBP
+};
+
+static const uint32_t rt2560_rf2522_r2[]    = RT2560_RF2522_R2;
+static const uint32_t rt2560_rf2523_r2[]    = RT2560_RF2523_R2;
+static const uint32_t rt2560_rf2524_r2[]    = RT2560_RF2524_R2;
+static const uint32_t rt2560_rf2525_r2[]    = RT2560_RF2525_R2;
+static const uint32_t rt2560_rf2525_hi_r2[] = RT2560_RF2525_HI_R2;
+static const uint32_t rt2560_rf2525e_r2[]   = RT2560_RF2525E_R2;
+static const uint32_t rt2560_rf2526_r2[]    = RT2560_RF2526_R2;
+static const uint32_t rt2560_rf2526_hi_r2[] = RT2560_RF2526_HI_R2;
+
+static const struct {
+	uint8_t		chan;
+	uint32_t	r1, r2, r4;
+} rt2560_rf5222[] = {
+	RT2560_RF5222
+};
+
+int
+rt2560_attach(device_t dev, int id)
+{
+	struct rt2560_softc *sc = device_get_softc(dev);
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ifnet *ifp;
+	int error, i;
+
+	sc->sc_dev = dev;
+
+	mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
+	    MTX_DEF | MTX_RECURSE);
+
+	callout_init(&sc->scan_ch, debug_mpsafenet ? CALLOUT_MPSAFE : 0);
+	callout_init(&sc->rssadapt_ch, CALLOUT_MPSAFE);
+
+	/* retrieve RT2560 rev. no */
+	sc->asic_rev = RAL_READ(sc, RT2560_CSR0);
+
+	/* retrieve MAC address */
+	rt2560_get_macaddr(sc, ic->ic_myaddr);
+
+	/* retrieve RF rev. no and various other things from EEPROM */
+	rt2560_read_eeprom(sc);
+
+	device_printf(dev, "MAC/BBP RT2560 (rev 0x%02x), RF %s\n",
+	    sc->asic_rev, rt2560_get_rf(sc->rf_rev));
+
+	/*
+	 * Allocate Tx and Rx rings.
+	 */
+	error = rt2560_alloc_tx_ring(sc, &sc->txq, RT2560_TX_RING_COUNT);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not allocate Tx ring\n");
+		goto fail1;
+	}
+
+	error = rt2560_alloc_tx_ring(sc, &sc->atimq, RT2560_ATIM_RING_COUNT);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not allocate ATIM ring\n");
+		goto fail2;
+	}
+
+	error = rt2560_alloc_tx_ring(sc, &sc->prioq, RT2560_PRIO_RING_COUNT);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not allocate Prio ring\n");
+		goto fail3;
+	}
+
+	error = rt2560_alloc_tx_ring(sc, &sc->bcnq, RT2560_BEACON_RING_COUNT);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not allocate Beacon ring\n");
+		goto fail4;
+	}
+
+	error = rt2560_alloc_rx_ring(sc, &sc->rxq, RT2560_RX_RING_COUNT);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not allocate Rx ring\n");
+		goto fail5;
+	}
+
+	ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
+	if (ifp == NULL) {
+		device_printf(sc->sc_dev, "can not if_alloc()\n");
+		goto fail6;
+	}
+
+	ifp->if_softc = sc;
+	if_initname(ifp, device_get_name(dev), device_get_unit(dev));
+	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+	ifp->if_init = rt2560_init;
+	ifp->if_ioctl = rt2560_ioctl;
+	ifp->if_start = rt2560_start;
+	ifp->if_watchdog = rt2560_watchdog;
+	IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN);
+	ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN;
+	IFQ_SET_READY(&ifp->if_snd);
+
+	ic->ic_ifp = ifp;
+	ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
+	ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
+	ic->ic_state = IEEE80211_S_INIT;
+
+	/* set device capabilities */
+	ic->ic_caps =
+	    IEEE80211_C_IBSS |		/* IBSS mode supported */
+	    IEEE80211_C_MONITOR |	/* monitor mode supported */
+	    IEEE80211_C_HOSTAP |	/* HostAp mode supported */
+	    IEEE80211_C_TXPMGT |	/* tx power management */
+	    IEEE80211_C_SHPREAMBLE |	/* short preamble supported */
+	    IEEE80211_C_SHSLOT |	/* short slot time supported */
+	    IEEE80211_C_WPA;		/* 802.11i */
+
+	if (sc->rf_rev == RT2560_RF_5222) {
+		/* set supported .11a rates */
+		ic->ic_sup_rates[IEEE80211_MODE_11A] = rt2560_rateset_11a;
+
+		/* set supported .11a channels */
+		for (i = 36; i <= 64; i += 4) {
+			ic->ic_channels[i].ic_freq =
+			    ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ);
+			ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A;
+		}
+		for (i = 100; i <= 140; i += 4) {
+			ic->ic_channels[i].ic_freq =
+			    ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ);
+			ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A;
+		}
+		for (i = 149; i <= 161; i += 4) {
+			ic->ic_channels[i].ic_freq =
+			    ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ);
+			ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A;
+		}
+	}
+
+	/* set supported .11b and .11g rates */
+	ic->ic_sup_rates[IEEE80211_MODE_11B] = rt2560_rateset_11b;
+	ic->ic_sup_rates[IEEE80211_MODE_11G] = rt2560_rateset_11g;
+
+	/* set supported .11b and .11g channels (1 through 14) */
+	for (i = 1; i <= 14; i++) {
+		ic->ic_channels[i].ic_freq =
+		    ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
+		ic->ic_channels[i].ic_flags =
+		    IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
+		    IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
+	}
+
+	ieee80211_ifattach(ic);
+	ic->ic_node_alloc = rt2560_node_alloc;
+	ic->ic_updateslot = rt2560_update_slot;
+	ic->ic_reset = rt2560_reset;
+	/* enable s/w bmiss handling in sta mode */
+	ic->ic_flags_ext |= IEEE80211_FEXT_SWBMISS;
+
+	/* override state transition machine */
+	sc->sc_newstate = ic->ic_newstate;
+	ic->ic_newstate = rt2560_newstate;
+	ieee80211_media_init(ic, rt2560_media_change, ieee80211_media_status);
+
+	bpfattach2(ifp, DLT_IEEE802_11_RADIO,
+	    sizeof (struct ieee80211_frame) + 64, &sc->sc_drvbpf);
+
+	sc->sc_rxtap_len = sizeof sc->sc_rxtapu;
+	sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
+	sc->sc_rxtap.wr_ihdr.it_present = htole32(RT2560_RX_RADIOTAP_PRESENT);
+
+	sc->sc_txtap_len = sizeof sc->sc_txtapu;
+	sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
+	sc->sc_txtap.wt_ihdr.it_present = htole32(RT2560_TX_RADIOTAP_PRESENT);
+
+	/*
+	 * Add a few sysctl knobs.
+	 */
+	sc->dwelltime = 200;
+
+	SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
+	    SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
+	    "txantenna", CTLFLAG_RW, &sc->tx_ant, 0, "tx antenna (0=auto)");
+
+	SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
+	    SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
+	    "rxantenna", CTLFLAG_RW, &sc->rx_ant, 0, "rx antenna (0=auto)");
+
+	SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
+	    SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "dwell",
+	    CTLFLAG_RW, &sc->dwelltime, 0,
+	    "channel dwell time (ms) for AP/station scanning");
+
+	if (bootverbose)
+		ieee80211_announce(ic);
+
+	return 0;
+
+fail6:	rt2560_free_rx_ring(sc, &sc->rxq);
+fail5:	rt2560_free_tx_ring(sc, &sc->bcnq);
+fail4:	rt2560_free_tx_ring(sc, &sc->prioq);
+fail3:	rt2560_free_tx_ring(sc, &sc->atimq);
+fail2:	rt2560_free_tx_ring(sc, &sc->txq);
+fail1:	mtx_destroy(&sc->sc_mtx);
+
+	return ENXIO;
+}
+
+int
+rt2560_detach(void *xsc)
+{
+	struct rt2560_softc *sc = xsc;
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ifnet *ifp = ic->ic_ifp;
+
+	rt2560_stop(sc);
+	callout_stop(&sc->scan_ch);
+	callout_stop(&sc->rssadapt_ch);
+
+	bpfdetach(ifp);
+	ieee80211_ifdetach(ic);
+
+	rt2560_free_tx_ring(sc, &sc->txq);
+	rt2560_free_tx_ring(sc, &sc->atimq);
+	rt2560_free_tx_ring(sc, &sc->prioq);
+	rt2560_free_tx_ring(sc, &sc->bcnq);
+	rt2560_free_rx_ring(sc, &sc->rxq);
+
+	if_free(ifp);
+
+	mtx_destroy(&sc->sc_mtx);
+
+	return 0;
+}
+
+void
+rt2560_shutdown(void *xsc)
+{
+	struct rt2560_softc *sc = xsc;
+
+	rt2560_stop(sc);
+}
+
+void
+rt2560_suspend(void *xsc)
+{
+	struct rt2560_softc *sc = xsc;
+
+	rt2560_stop(sc);
+}
+
+void
+rt2560_resume(void *xsc)
+{
+	struct rt2560_softc *sc = xsc;
+	struct ifnet *ifp = sc->sc_ic.ic_ifp;
+
+	if (ifp->if_flags & IFF_UP) {
+		ifp->if_init(ifp->if_softc);
+		if (ifp->if_drv_flags & IFF_DRV_RUNNING)
+			ifp->if_start(ifp);
+	}
+}
+
+static void
+rt2560_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
+{
+	if (error != 0)
+		return;
+
+	KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
+
+	*(bus_addr_t *)arg = segs[0].ds_addr;
+}
+
+static int
+rt2560_alloc_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring,
+    int count)
+{
+	int i, error;
+
+	ring->count = count;
+	ring->queued = 0;
+	ring->cur = ring->next = 0;
+	ring->cur_encrypt = ring->next_encrypt = 0;
+
+	error = bus_dma_tag_create(NULL, 4, 0, BUS_SPACE_MAXADDR_32BIT,
+	    BUS_SPACE_MAXADDR, NULL, NULL, count * RT2560_TX_DESC_SIZE, 1,
+	    count * RT2560_TX_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not create desc DMA tag\n");
+		goto fail;
+	}
+
+	error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
+	    BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not allocate DMA memory\n");
+		goto fail;
+	}
+
+	error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
+	    count * RT2560_TX_DESC_SIZE, rt2560_dma_map_addr, &ring->physaddr,
+	    0);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not load desc DMA map\n");
+		goto fail;
+	}
+
+	ring->data = malloc(count * sizeof (struct rt2560_tx_data), M_DEVBUF,
+	    M_NOWAIT | M_ZERO);
+	if (ring->data == NULL) {
+		device_printf(sc->sc_dev, "could not allocate soft data\n");
+		error = ENOMEM;
+		goto fail;
+	}
+
+	error = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
+	    BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, RT2560_MAX_SCATTER,
+	    MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not create data DMA tag\n");
+		goto fail;
+	}
+
+	for (i = 0; i < count; i++) {
+		error = bus_dmamap_create(ring->data_dmat, 0,
+		    &ring->data[i].map);
+		if (error != 0) {
+			device_printf(sc->sc_dev, "could not create DMA map\n");
+			goto fail;
+		}
+	}
+
+	return 0;
+
+fail:	rt2560_free_tx_ring(sc, ring);
+	return error;
+}
+
+static void
+rt2560_reset_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring)
+{
+	struct rt2560_tx_desc *desc;
+	struct rt2560_tx_data *data;
+	int i;
+
+	for (i = 0; i < ring->count; i++) {
+		desc = &ring->desc[i];
+		data = &ring->data[i];
+
+		if (data->m != NULL) {
+			bus_dmamap_sync(ring->data_dmat, data->map,
+			    BUS_DMASYNC_POSTWRITE);
+			bus_dmamap_unload(ring->data_dmat, data->map);
+			m_freem(data->m);
+			data->m = NULL;
+		}
+
+		if (data->ni != NULL) {
+			ieee80211_free_node(data->ni);
+			data->ni = NULL;
+		}
+
+		desc->flags = 0;
+	}
+
+	bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
+
+	ring->queued = 0;
+	ring->cur = ring->next = 0;
+	ring->cur_encrypt = ring->next_encrypt = 0;
+}
+
+static void
+rt2560_free_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring)
+{
+	struct rt2560_tx_data *data;
+	int i;
+
+	if (ring->desc != NULL) {
+		bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
+		    BUS_DMASYNC_POSTWRITE);
+		bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
+		bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
+	}
+
+	if (ring->desc_dmat != NULL)
+		bus_dma_tag_destroy(ring->desc_dmat);
+
+	if (ring->data != NULL) {
+		for (i = 0; i < ring->count; i++) {
+			data = &ring->data[i];
+
+			if (data->m != NULL) {
+				bus_dmamap_sync(ring->data_dmat, data->map,
+				    BUS_DMASYNC_POSTWRITE);
+				bus_dmamap_unload(ring->data_dmat, data->map);
+				m_freem(data->m);
+			}
+
+			if (data->ni != NULL)
+				ieee80211_free_node(data->ni);
+
+			if (data->map != NULL)
+				bus_dmamap_destroy(ring->data_dmat, data->map);
+		}
+
+		free(ring->data, M_DEVBUF);
+	}
+
+	if (ring->data_dmat != NULL)
+		bus_dma_tag_destroy(ring->data_dmat);
+}
+
+static int
+rt2560_alloc_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring,
+    int count)
+{
+	struct rt2560_rx_desc *desc;
+	struct rt2560_rx_data *data;
+	bus_addr_t physaddr;
+	int i, error;
+
+	ring->count = count;
+	ring->cur = ring->next = 0;
+	ring->cur_decrypt = 0;
+
+	error = bus_dma_tag_create(NULL, 4, 0, BUS_SPACE_MAXADDR_32BIT,
+	    BUS_SPACE_MAXADDR, NULL, NULL, count * RT2560_RX_DESC_SIZE, 1,
+	    count * RT2560_RX_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not create desc DMA tag\n");
+		goto fail;
+	}
+
+	error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
+	    BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not allocate DMA memory\n");
+		goto fail;
+	}
+
+	error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
+	    count * RT2560_RX_DESC_SIZE, rt2560_dma_map_addr, &ring->physaddr,
+	    0);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not load desc DMA map\n");
+		goto fail;
+	}
+
+	ring->data = malloc(count * sizeof (struct rt2560_rx_data), M_DEVBUF,
+	    M_NOWAIT | M_ZERO);
+	if (ring->data == NULL) {
+		device_printf(sc->sc_dev, "could not allocate soft data\n");
+		error = ENOMEM;
+		goto fail;
+	}
+
+	/*
+	 * Pre-allocate Rx buffers and populate Rx ring.
+	 */
+	error = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
+	    BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES, 0, NULL,
+	    NULL, &ring->data_dmat);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not create data DMA tag\n");
+		goto fail;
+	}
+
+	for (i = 0; i < count; i++) {
+		desc = &sc->rxq.desc[i];
+		data = &sc->rxq.data[i];
+
+		error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
+		if (error != 0) {
+			device_printf(sc->sc_dev, "could not create DMA map\n");
+			goto fail;
+		}
+
+		data->m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
+		if (data->m == NULL) {
+			device_printf(sc->sc_dev,
+			    "could not allocate rx mbuf\n");
+			error = ENOMEM;
+			goto fail;
+		}
+
+		error = bus_dmamap_load(ring->data_dmat, data->map,
+		    mtod(data->m, void *), MCLBYTES, rt2560_dma_map_addr,
+		    &physaddr, 0);
+		if (error != 0) {
+			device_printf(sc->sc_dev,
+			    "could not load rx buf DMA map");
+			goto fail;
+		}
+
+		desc->flags = htole32(RT2560_RX_BUSY);
+		desc->physaddr = htole32(physaddr);
+	}
+
+	bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
+
+	return 0;
+
+fail:	rt2560_free_rx_ring(sc, ring);
+	return error;
+}
+
+static void
+rt2560_reset_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring)
+{
+	int i;
+
+	for (i = 0; i < ring->count; i++) {
+		ring->desc[i].flags = htole32(RT2560_RX_BUSY);
+		ring->data[i].drop = 0;
+	}
+
+	bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
+
+	ring->cur = ring->next = 0;
+	ring->cur_decrypt = 0;
+}
+
+static void
+rt2560_free_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring)
+{
+	struct rt2560_rx_data *data;
+	int i;
+
+	if (ring->desc != NULL) {
+		bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
+		    BUS_DMASYNC_POSTWRITE);
+		bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
+		bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
+	}
+
+	if (ring->desc_dmat != NULL)
+		bus_dma_tag_destroy(ring->desc_dmat);
+
+	if (ring->data != NULL) {
+		for (i = 0; i < ring->count; i++) {
+			data = &ring->data[i];
+
+			if (data->m != NULL) {
+				bus_dmamap_sync(ring->data_dmat, data->map,
+				    BUS_DMASYNC_POSTREAD);
+				bus_dmamap_unload(ring->data_dmat, data->map);
+				m_freem(data->m);
+			}
+
+			if (data->map != NULL)
+				bus_dmamap_destroy(ring->data_dmat, data->map);
+		}
+
+		free(ring->data, M_DEVBUF);
+	}
+
+	if (ring->data_dmat != NULL)
+		bus_dma_tag_destroy(ring->data_dmat);
+}
+
+static struct ieee80211_node *
+rt2560_node_alloc(struct ieee80211_node_table *nt)
+{
+	struct rt2560_node *rn;
+
+	rn = malloc(sizeof (struct rt2560_node), M_80211_NODE,
+	    M_NOWAIT | M_ZERO);
+
+	return (rn != NULL) ? &rn->ni : NULL;
+}
+
+static int
+rt2560_media_change(struct ifnet *ifp)
+{
+	struct rt2560_softc *sc = ifp->if_softc;
+	int error;
+
+	error = ieee80211_media_change(ifp);
+	if (error != ENETRESET)
+		return error;
+
+	if ((ifp->if_flags & IFF_UP) &&
+	    (ifp->if_drv_flags & IFF_DRV_RUNNING))
+		rt2560_init(sc);
+
+	return 0;
+}
+
+/*
+ * This function is called periodically (every 200ms) during scanning to
+ * switch from one channel to another.
+ */
+static void
+rt2560_next_scan(void *arg)
+{
+	struct rt2560_softc *sc = arg;
+	struct ieee80211com *ic = &sc->sc_ic;
+
+	if (ic->ic_state == IEEE80211_S_SCAN)
+		ieee80211_next_scan(ic);
+}
+
+/*
+ * This function is called for each node present in the node station table.
+ */
+static void
+rt2560_iter_func(void *arg, struct ieee80211_node *ni)
+{
+	struct rt2560_node *rn = (struct rt2560_node *)ni;
+
+	ral_rssadapt_updatestats(&rn->rssadapt);
+}
+
+/*
+ * This function is called periodically (every 100ms) in RUN state to update
+ * the rate adaptation statistics.
+ */
+static void
+rt2560_update_rssadapt(void *arg)
+{
+	struct rt2560_softc *sc = arg;
+	struct ieee80211com *ic = &sc->sc_ic;
+
+	RAL_LOCK(sc);
+
+	ieee80211_iterate_nodes(&ic->ic_sta, rt2560_iter_func, arg);
+	callout_reset(&sc->rssadapt_ch, hz / 10, rt2560_update_rssadapt, sc);
+
+	RAL_UNLOCK(sc);
+}
+
+static int
+rt2560_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
+{
+	struct rt2560_softc *sc = ic->ic_ifp->if_softc;
+	enum ieee80211_state ostate;
+	struct ieee80211_node *ni;
+	struct mbuf *m;
+	int error = 0;
+
+	ostate = ic->ic_state;
+	callout_stop(&sc->scan_ch);
+
+	switch (nstate) {
+	case IEEE80211_S_INIT:
+		callout_stop(&sc->rssadapt_ch);
+
+		if (ostate == IEEE80211_S_RUN) {
+			/* abort TSF synchronization */
+			RAL_WRITE(sc, RT2560_CSR14, 0);
+
+			/* turn association led off */
+			rt2560_update_led(sc, 0, 0);
+		}
+		break;
+
+	case IEEE80211_S_SCAN:
+		rt2560_set_chan(sc, ic->ic_curchan);
+		callout_reset(&sc->scan_ch, (sc->dwelltime * hz) / 1000,
+		    rt2560_next_scan, sc);
+		break;
+
+	case IEEE80211_S_AUTH:
+		rt2560_set_chan(sc, ic->ic_curchan);
+		break;
+
+	case IEEE80211_S_ASSOC:
+		rt2560_set_chan(sc, ic->ic_curchan);
+		break;
+
+	case IEEE80211_S_RUN:
+		rt2560_set_chan(sc, ic->ic_curchan);
+
+		ni = ic->ic_bss;
+
+		if (ic->ic_opmode != IEEE80211_M_MONITOR) {
+			rt2560_update_plcp(sc);
+			rt2560_set_basicrates(sc);
+			rt2560_set_bssid(sc, ni->ni_bssid);
+		}
+
+		if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
+		    ic->ic_opmode == IEEE80211_M_IBSS) {
+			m = ieee80211_beacon_alloc(ic, ni, &sc->sc_bo);
+			if (m == NULL) {
+				device_printf(sc->sc_dev,
+				    "could not allocate beacon\n");
+				error = ENOBUFS;
+				break;
+			}
+
+			ieee80211_ref_node(ni);
+			error = rt2560_tx_bcn(sc, m, ni);
+			if (error != 0)
+				break;
+		}
+
+		/* turn assocation led on */
+		rt2560_update_led(sc, 1, 0);
+
+		if (ic->ic_opmode != IEEE80211_M_MONITOR) {
+			callout_reset(&sc->rssadapt_ch, hz / 10,
+			    rt2560_update_rssadapt, sc);
+
+			rt2560_enable_tsf_sync(sc);
+		}
+		break;
+	}
+
+	return (error != 0) ? error : sc->sc_newstate(ic, nstate, arg);
+}
+
+/*
+ * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or
+ * 93C66).
+ */
+static uint16_t
+rt2560_eeprom_read(struct rt2560_softc *sc, uint8_t addr)
+{
+	uint32_t tmp;
+	uint16_t val;
+	int n;
+
+	/* clock C once before the first command */
+	RT2560_EEPROM_CTL(sc, 0);
+
+	RT2560_EEPROM_CTL(sc, RT2560_S);
+	RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C);
+	RT2560_EEPROM_CTL(sc, RT2560_S);
+
+	/* write start bit (1) */
+	RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D);
+	RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C);
+
+	/* write READ opcode (10) */
+	RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D);
+	RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C);
+	RT2560_EEPROM_CTL(sc, RT2560_S);
+	RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C);
+
+	/* write address (A5-A0 or A7-A0) */
+	n = (RAL_READ(sc, RT2560_CSR21) & RT2560_93C46) ? 5 : 7;
+	for (; n >= 0; n--) {
+		RT2560_EEPROM_CTL(sc, RT2560_S |
+		    (((addr >> n) & 1) << RT2560_SHIFT_D));
+		RT2560_EEPROM_CTL(sc, RT2560_S |
+		    (((addr >> n) & 1) << RT2560_SHIFT_D) | RT2560_C);
+	}
+
+	RT2560_EEPROM_CTL(sc, RT2560_S);
+
+	/* read data Q15-Q0 */
+	val = 0;
+	for (n = 15; n >= 0; n--) {
+		RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C);
+		tmp = RAL_READ(sc, RT2560_CSR21);
+		val |= ((tmp & RT2560_Q) >> RT2560_SHIFT_Q) << n;
+		RT2560_EEPROM_CTL(sc, RT2560_S);
+	}
+
+	RT2560_EEPROM_CTL(sc, 0);
+
+	/* clear Chip Select and clock C */
+	RT2560_EEPROM_CTL(sc, RT2560_S);
+	RT2560_EEPROM_CTL(sc, 0);
+	RT2560_EEPROM_CTL(sc, RT2560_C);
+
+	return val;
+}
+
+/*
+ * Some frames were processed by the hardware cipher engine and are ready for
+ * transmission.
+ */
+static void
+rt2560_encryption_intr(struct rt2560_softc *sc)
+{
+	struct rt2560_tx_desc *desc;
+	int hw;
+
+	/* retrieve last descriptor index processed by cipher engine */
+	hw = RAL_READ(sc, RT2560_SECCSR1) - sc->txq.physaddr;
+	hw /= RT2560_TX_DESC_SIZE;
+
+	bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map,
+	    BUS_DMASYNC_POSTREAD);
+
+	for (; sc->txq.next_encrypt != hw;) {
+		desc = &sc->txq.desc[sc->txq.next_encrypt];
+
+		if ((le32toh(desc->flags) & RT2560_TX_BUSY) ||
+		    (le32toh(desc->flags) & RT2560_TX_CIPHER_BUSY))
+			break;
+
+		/* for TKIP, swap eiv field to fix a bug in ASIC */
+		if ((le32toh(desc->flags) & RT2560_TX_CIPHER_MASK) ==
+		    RT2560_TX_CIPHER_TKIP)
+			desc->eiv = bswap32(desc->eiv);
+
+		/* mark the frame ready for transmission */
+		desc->flags |= htole32(RT2560_TX_BUSY | RT2560_TX_VALID);
+
+		DPRINTFN(15, ("encryption done idx=%u\n",
+		    sc->txq.next_encrypt));
+
+		sc->txq.next_encrypt =
+		    (sc->txq.next_encrypt + 1) % RT2560_TX_RING_COUNT;
+	}
+
+	bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+
+	/* kick Tx */
+	RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_TX);
+}
+
+static void
+rt2560_tx_intr(struct rt2560_softc *sc)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ifnet *ifp = ic->ic_ifp;
+	struct rt2560_tx_desc *desc;
+	struct rt2560_tx_data *data;
+	struct rt2560_node *rn;
+
+	bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map,
+	    BUS_DMASYNC_POSTREAD);
+
+	for (;;) {
+		desc = &sc->txq.desc[sc->txq.next];
+		data = &sc->txq.data[sc->txq.next];
+
+		if ((le32toh(desc->flags) & RT2560_TX_BUSY) ||
+		    (le32toh(desc->flags) & RT2560_TX_CIPHER_BUSY) ||
+		    !(le32toh(desc->flags) & RT2560_TX_VALID))
+			break;
+
+		rn = (struct rt2560_node *)data->ni;
+
+		switch (le32toh(desc->flags) & RT2560_TX_RESULT_MASK) {
+		case RT2560_TX_SUCCESS:
+			DPRINTFN(10, ("data frame sent successfully\n"));
+			if (data->id.id_node != NULL) {
+				ral_rssadapt_raise_rate(ic, &rn->rssadapt,
+				    &data->id);
+			}
+			ifp->if_opackets++;
+			break;
+
+		case RT2560_TX_SUCCESS_RETRY:
+			DPRINTFN(9, ("data frame sent after %u retries\n",
+			    (le32toh(desc->flags) >> 5) & 0x7));
+			ifp->if_opackets++;
+			break;
+
+		case RT2560_TX_FAIL_RETRY:
+			DPRINTFN(9, ("sending data frame failed (too much "
+			    "retries)\n"));
+			if (data->id.id_node != NULL) {
+				ral_rssadapt_lower_rate(ic, data->ni,
+				    &rn->rssadapt, &data->id);
+			}
+			ifp->if_oerrors++;
+			break;
+
+		case RT2560_TX_FAIL_INVALID:
+		case RT2560_TX_FAIL_OTHER:
+		default:
+			device_printf(sc->sc_dev, "sending data frame failed "
+			    "0x%08x\n", le32toh(desc->flags));
+			ifp->if_oerrors++;
+		}
+
+		bus_dmamap_sync(sc->txq.data_dmat, data->map,
+		    BUS_DMASYNC_POSTWRITE);
+		bus_dmamap_unload(sc->txq.data_dmat, data->map);
+		m_freem(data->m);
+		data->m = NULL;
+		ieee80211_free_node(data->ni);
+		data->ni = NULL;
+
+		/* descriptor is no longer valid */
+		desc->flags &= ~htole32(RT2560_TX_VALID);
+
+		DPRINTFN(15, ("tx done idx=%u\n", sc->txq.next));
+
+		sc->txq.queued--;
+		sc->txq.next = (sc->txq.next + 1) % RT2560_TX_RING_COUNT;
+	}
+
+	bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+
+	sc->sc_tx_timer = 0;
+	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
+	rt2560_start(ifp);
+}
+
+static void
+rt2560_prio_intr(struct rt2560_softc *sc)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ifnet *ifp = ic->ic_ifp;
+	struct rt2560_tx_desc *desc;
+	struct rt2560_tx_data *data;
+
+	bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map,
+	    BUS_DMASYNC_POSTREAD);
+
+	for (;;) {
+		desc = &sc->prioq.desc[sc->prioq.next];
+		data = &sc->prioq.data[sc->prioq.next];
+
+		if ((le32toh(desc->flags) & RT2560_TX_BUSY) ||
+		    !(le32toh(desc->flags) & RT2560_TX_VALID))
+			break;
+
+		switch (le32toh(desc->flags) & RT2560_TX_RESULT_MASK) {
+		case RT2560_TX_SUCCESS:
+			DPRINTFN(10, ("mgt frame sent successfully\n"));
+			break;
+
+		case RT2560_TX_SUCCESS_RETRY:
+			DPRINTFN(9, ("mgt frame sent after %u retries\n",
+			    (le32toh(desc->flags) >> 5) & 0x7));
+			break;
+
+		case RT2560_TX_FAIL_RETRY:
+			DPRINTFN(9, ("sending mgt frame failed (too much "
+			    "retries)\n"));
+			break;
+
+		case RT2560_TX_FAIL_INVALID:
+		case RT2560_TX_FAIL_OTHER:
+		default:
+			device_printf(sc->sc_dev, "sending mgt frame failed "
+			    "0x%08x\n", le32toh(desc->flags));
+		}
+
+		bus_dmamap_sync(sc->prioq.data_dmat, data->map,
+		    BUS_DMASYNC_POSTWRITE);
+		bus_dmamap_unload(sc->prioq.data_dmat, data->map);
+		m_freem(data->m);
+		data->m = NULL;
+		ieee80211_free_node(data->ni);
+		data->ni = NULL;
+
+		/* descriptor is no longer valid */
+		desc->flags &= ~htole32(RT2560_TX_VALID);
+
+		DPRINTFN(15, ("prio done idx=%u\n", sc->prioq.next));
+
+		sc->prioq.queued--;
+		sc->prioq.next = (sc->prioq.next + 1) % RT2560_PRIO_RING_COUNT;
+	}
+
+	bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+
+	sc->sc_tx_timer = 0;
+	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
+	rt2560_start(ifp);
+}
+
+/*
+ * Some frames were processed by the hardware cipher engine and are ready for
+ * transmission to the IEEE802.11 layer.
+ */
+static void
+rt2560_decryption_intr(struct rt2560_softc *sc)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ifnet *ifp = ic->ic_ifp;
+	struct rt2560_rx_desc *desc;
+	struct rt2560_rx_data *data;
+	bus_addr_t physaddr;
+	struct ieee80211_frame *wh;
+	struct ieee80211_node *ni;
+	struct rt2560_node *rn;
+	struct mbuf *mnew, *m;
+	int hw, error;
+
+	/* retrieve last decriptor index processed by cipher engine */
+	hw = RAL_READ(sc, RT2560_SECCSR0) - sc->rxq.physaddr;
+	hw /= RT2560_RX_DESC_SIZE;
+
+	bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
+	    BUS_DMASYNC_POSTREAD);
+
+	for (; sc->rxq.cur_decrypt != hw;) {
+		desc = &sc->rxq.desc[sc->rxq.cur_decrypt];
+		data = &sc->rxq.data[sc->rxq.cur_decrypt];
+
+		if ((le32toh(desc->flags) & RT2560_RX_BUSY) ||
+		    (le32toh(desc->flags) & RT2560_RX_CIPHER_BUSY))
+			break;
+
+		if (data->drop) {
+			ifp->if_ierrors++;
+			goto skip;
+		}
+
+		if ((le32toh(desc->flags) & RT2560_RX_CIPHER_MASK) != 0 &&
+		    (le32toh(desc->flags) & RT2560_RX_ICV_ERROR)) {
+			ifp->if_ierrors++;
+			goto skip;
+		}
+
+		/*
+		 * Try to allocate a new mbuf for this ring element and load it
+		 * before processing the current mbuf. If the ring element
+		 * cannot be loaded, drop the received packet and reuse the old
+		 * mbuf. In the unlikely case that the old mbuf can't be
+		 * reloaded either, explicitly panic.
+		 */
+		mnew = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
+		if (mnew == NULL) {
+			ifp->if_ierrors++;
+			goto skip;
+		}
+
+		bus_dmamap_sync(sc->rxq.data_dmat, data->map,
+		    BUS_DMASYNC_POSTREAD);
+		bus_dmamap_unload(sc->rxq.data_dmat, data->map);
+
+		error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
+		    mtod(mnew, void *), MCLBYTES, rt2560_dma_map_addr,
+		    &physaddr, 0);
+		if (error != 0) {
+			m_freem(mnew);
+
+			/* try to reload the old mbuf */
+			error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
+			    mtod(data->m, void *), MCLBYTES,
+			    rt2560_dma_map_addr, &physaddr, 0);
+			if (error != 0) {
+				/* very unlikely that it will fail... */
+				panic("%s: could not load old rx mbuf",
+				    device_get_name(sc->sc_dev));
+			}
+			ifp->if_ierrors++;
+			goto skip;
+		}
+
+		/*
+	 	 * New mbuf successfully loaded, update Rx ring and continue
+		 * processing.
+		 */
+		m = data->m;
+		data->m = mnew;
+		desc->physaddr = htole32(physaddr);
+
+		/* finalize mbuf */
+		m->m_pkthdr.rcvif = ifp;
+		m->m_pkthdr.len = m->m_len =
+		    (le32toh(desc->flags) >> 16) & 0xfff;
+
+		if (sc->sc_drvbpf != NULL) {
+			struct rt2560_rx_radiotap_header *tap = &sc->sc_rxtap;
+			uint32_t tsf_lo, tsf_hi;
+
+			/* get timestamp (low and high 32 bits) */
+			tsf_hi = RAL_READ(sc, RT2560_CSR17);
+			tsf_lo = RAL_READ(sc, RT2560_CSR16);
+
+			tap->wr_tsf =
+			    htole64(((uint64_t)tsf_hi << 32) | tsf_lo);
+			tap->wr_flags = 0;
+			tap->wr_rate = rt2560_rxrate(desc);
+			tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
+			tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
+			tap->wr_antenna = sc->rx_ant;
+			tap->wr_antsignal = desc->rssi;
+
+			bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m);
+		}
+
+		wh = mtod(m, struct ieee80211_frame *);
+		ni = ieee80211_find_rxnode(ic,
+		    (struct ieee80211_frame_min *)wh);
+
+		/* send the frame to the 802.11 layer */
+		ieee80211_input(ic, m, ni, desc->rssi, 0);
+
+		/* give rssi to the rate adatation algorithm */
+		rn = (struct rt2560_node *)ni;
+		ral_rssadapt_input(ic, ni, &rn->rssadapt, desc->rssi);
+
+		/* node is no longer needed */
+		ieee80211_free_node(ni);
+
+skip:		desc->flags = htole32(RT2560_RX_BUSY);
+
+		DPRINTFN(15, ("decryption done idx=%u\n", sc->rxq.cur_decrypt));
+
+		sc->rxq.cur_decrypt =
+		    (sc->rxq.cur_decrypt + 1) % RT2560_RX_RING_COUNT;
+	}
+
+	bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+}
+
+/*
+ * Some frames were received. Pass them to the hardware cipher engine before
+ * sending them to the 802.11 layer.
+ */
+static void
+rt2560_rx_intr(struct rt2560_softc *sc)
+{
+	struct rt2560_rx_desc *desc;
+	struct rt2560_rx_data *data;
+
+	bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
+	    BUS_DMASYNC_POSTREAD);
+
+	for (;;) {
+		desc = &sc->rxq.desc[sc->rxq.cur];
+		data = &sc->rxq.data[sc->rxq.cur];
+
+		if ((le32toh(desc->flags) & RT2560_RX_BUSY) ||
+		    (le32toh(desc->flags) & RT2560_RX_CIPHER_BUSY))
+			break;
+
+		data->drop = 0;
+
+		if ((le32toh(desc->flags) & RT2560_RX_PHY_ERROR) ||
+		    (le32toh(desc->flags) & RT2560_RX_CRC_ERROR)) {
+			/*
+			 * This should not happen since we did not request
+			 * to receive those frames when we filled RXCSR0.
+			 */
+			DPRINTFN(5, ("PHY or CRC error flags 0x%08x\n",
+			    le32toh(desc->flags)));
+			data->drop = 1;
+		}
+
+		if (((le32toh(desc->flags) >> 16) & 0xfff) > MCLBYTES) {
+			DPRINTFN(5, ("bad length\n"));
+			data->drop = 1;
+		}
+
+		/* mark the frame for decryption */
+		desc->flags |= htole32(RT2560_RX_CIPHER_BUSY);
+
+		DPRINTFN(15, ("rx done idx=%u\n", sc->rxq.cur));
+
+		sc->rxq.cur = (sc->rxq.cur + 1) % RT2560_RX_RING_COUNT;
+	}
+
+	bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+
+	/* kick decrypt */
+	RAL_WRITE(sc, RT2560_SECCSR0, RT2560_KICK_DECRYPT);
+}
+
+/*
+ * This function is called periodically in IBSS mode when a new beacon must be
+ * sent out.
+ */
+static void
+rt2560_beacon_expire(struct rt2560_softc *sc)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct rt2560_tx_data *data;
+
+	if (ic->ic_opmode != IEEE80211_M_IBSS &&
+	    ic->ic_opmode != IEEE80211_M_HOSTAP)
+		return;
+
+	data = &sc->bcnq.data[sc->bcnq.next];
+
+	bus_dmamap_sync(sc->bcnq.data_dmat, data->map, BUS_DMASYNC_POSTWRITE);
+	bus_dmamap_unload(sc->bcnq.data_dmat, data->map);
+
+	ieee80211_beacon_update(ic, data->ni, &sc->sc_bo, data->m, 1);
+
+	if (ic->ic_rawbpf != NULL)
+		bpf_mtap(ic->ic_rawbpf, data->m);
+
+	rt2560_tx_bcn(sc, data->m, data->ni);
+
+	DPRINTFN(15, ("beacon expired\n"));
+
+	sc->bcnq.next = (sc->bcnq.next + 1) % RT2560_BEACON_RING_COUNT;
+}
+
+/* ARGSUSED */
+static void
+rt2560_wakeup_expire(struct rt2560_softc *sc)
+{
+	DPRINTFN(2, ("wakeup expired\n"));
+}
+
+void
+rt2560_intr(void *arg)
+{
+	struct rt2560_softc *sc = arg;
+	uint32_t r;
+
+	RAL_LOCK(sc);
+
+	/* disable interrupts */
+	RAL_WRITE(sc, RT2560_CSR8, 0xffffffff);
+
+	r = RAL_READ(sc, RT2560_CSR7);
+	RAL_WRITE(sc, RT2560_CSR7, r);
+
+	if (r & RT2560_BEACON_EXPIRE)
+		rt2560_beacon_expire(sc);
+
+	if (r & RT2560_WAKEUP_EXPIRE)
+		rt2560_wakeup_expire(sc);
+
+	if (r & RT2560_ENCRYPTION_DONE)
+		rt2560_encryption_intr(sc);
+
+	if (r & RT2560_TX_DONE)
+		rt2560_tx_intr(sc);
+
+	if (r & RT2560_PRIO_DONE)
+		rt2560_prio_intr(sc);
+
+	if (r & RT2560_DECRYPTION_DONE)
+		rt2560_decryption_intr(sc);
+
+	if (r & RT2560_RX_DONE)
+		rt2560_rx_intr(sc);
+
+	/* re-enable interrupts */
+	RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK);
+
+	RAL_UNLOCK(sc);
+}
+
+/* quickly determine if a given rate is CCK or OFDM */
+#define RAL_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22)
+
+#define RAL_ACK_SIZE	14	/* 10 + 4(FCS) */
+#define RAL_CTS_SIZE	14	/* 10 + 4(FCS) */
+
+#define RAL_SIFS		10	/* us */
+
+#define RT2560_TXRX_TURNAROUND	10	/* us */
+
+/*
+ * This function is only used by the Rx radiotap code.
+ */
+static uint8_t
+rt2560_rxrate(struct rt2560_rx_desc *desc)
+{
+	if (le32toh(desc->flags) & RT2560_RX_OFDM) {
+		/* reverse function of rt2560_plcp_signal */
+		switch (desc->rate) {
+		case 0xb:	return 12;
+		case 0xf:	return 18;
+		case 0xa:	return 24;
+		case 0xe:	return 36;
+		case 0x9:	return 48;
+		case 0xd:	return 72;
+		case 0x8:	return 96;
+		case 0xc:	return 108;
+		}
+	} else {
+		if (desc->rate == 10)
+			return 2;
+		if (desc->rate == 20)
+			return 4;
+		if (desc->rate == 55)
+			return 11;
+		if (desc->rate == 110)
+			return 22;
+	}
+	return 2;	/* should not get there */
+}
+
+/*
+ * Return the expected ack rate for a frame transmitted at rate `rate'.
+ * XXX: this should depend on the destination node basic rate set.
+ */
+static int
+rt2560_ack_rate(struct ieee80211com *ic, int rate)
+{
+	switch (rate) {
+	/* CCK rates */
+	case 2:
+		return 2;
+	case 4:
+	case 11:
+	case 22:
+		return (ic->ic_curmode == IEEE80211_MODE_11B) ? 4 : rate;
+
+	/* OFDM rates */
+	case 12:
+	case 18:
+		return 12;
+	case 24:
+	case 36:
+		return 24;
+	case 48:
+	case 72:
+	case 96:
+	case 108:
+		return 48;
+	}
+
+	/* default to 1Mbps */
+	return 2;
+}
+
+/*
+ * Compute the duration (in us) needed to transmit `len' bytes at rate `rate'.
+ * The function automatically determines the operating mode depending on the
+ * given rate. `flags' indicates whether short preamble is in use or not.
+ */
+static uint16_t
+rt2560_txtime(int len, int rate, uint32_t flags)
+{
+	uint16_t txtime;
+
+	if (RAL_RATE_IS_OFDM(rate)) {
+		/* IEEE Std 802.11a-1999, pp. 37 */
+		txtime = (8 + 4 * len + 3 + rate - 1) / rate;
+		txtime = 16 + 4 + 4 * txtime + 6;
+	} else {
+		/* IEEE Std 802.11b-1999, pp. 28 */
+		txtime = (16 * len + rate - 1) / rate;
+		if (rate != 2 && (flags & IEEE80211_F_SHPREAMBLE))
+			txtime +=  72 + 24;
+		else
+			txtime += 144 + 48;
+	}
+
+	return txtime;
+}
+
+static uint8_t
+rt2560_plcp_signal(int rate)
+{
+	switch (rate) {
+	/* CCK rates (returned values are device-dependent) */
+	case 2:		return 0x0;
+	case 4:		return 0x1;
+	case 11:	return 0x2;
+	case 22:	return 0x3;
+
+	/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
+	case 12:	return 0xb;
+	case 18:	return 0xf;
+	case 24:	return 0xa;
+	case 36:	return 0xe;
+	case 48:	return 0x9;
+	case 72:	return 0xd;
+	case 96:	return 0x8;
+	case 108:	return 0xc;
+
+	/* unsupported rates (should not get there) */
+	default:	return 0xff;
+	}
+}
+
+static void
+rt2560_setup_tx_desc(struct rt2560_softc *sc, struct rt2560_tx_desc *desc,
+    uint32_t flags, int len, int rate, int encrypt, bus_addr_t physaddr)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	uint16_t plcp_length;
+	int remainder;
+
+	desc->flags = htole32(flags);
+	desc->flags |= htole32(len << 16);
+	desc->flags |= encrypt ? htole32(RT2560_TX_CIPHER_BUSY) :
+	    htole32(RT2560_TX_BUSY | RT2560_TX_VALID);
+
+	desc->physaddr = htole32(physaddr);
+	desc->wme = htole16(
+	    RT2560_AIFSN(2) |
+	    RT2560_LOGCWMIN(3) |
+	    RT2560_LOGCWMAX(8));
+
+	/* setup PLCP fields */
+	desc->plcp_signal  = rt2560_plcp_signal(rate);
+	desc->plcp_service = 4;
+
+	len += IEEE80211_CRC_LEN;
+	if (RAL_RATE_IS_OFDM(rate)) {
+		desc->flags |= htole32(RT2560_TX_OFDM);
+
+		plcp_length = len & 0xfff;
+		desc->plcp_length_hi = plcp_length >> 6;
+		desc->plcp_length_lo = plcp_length & 0x3f;
+	} else {
+		plcp_length = (16 * len + rate - 1) / rate;
+		if (rate == 22) {
+			remainder = (16 * len) % 22;
+			if (remainder != 0 && remainder < 7)
+				desc->plcp_service |= RT2560_PLCP_LENGEXT;
+		}
+		desc->plcp_length_hi = plcp_length >> 8;
+		desc->plcp_length_lo = plcp_length & 0xff;
+
+		if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
+			desc->plcp_signal |= 0x08;
+	}
+}
+
+static int
+rt2560_tx_bcn(struct rt2560_softc *sc, struct mbuf *m0,
+    struct ieee80211_node *ni)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct rt2560_tx_desc *desc;
+	struct rt2560_tx_data *data;
+	bus_dma_segment_t segs[RT2560_MAX_SCATTER];
+	int nsegs, rate, error;
+
+	desc = &sc->bcnq.desc[sc->bcnq.cur];
+	data = &sc->bcnq.data[sc->bcnq.cur];
+
+	rate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 2;
+
+	error = bus_dmamap_load_mbuf_sg(sc->bcnq.data_dmat, data->map, m0,
+	    segs, &nsegs, BUS_DMA_NOWAIT);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
+		    error);
+		m_freem(m0);
+		return error;
+	}
+
+	if (sc->sc_drvbpf != NULL) {
+		struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap;
+
+		tap->wt_flags = 0;
+		tap->wt_rate = rate;
+		tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
+		tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
+		tap->wt_antenna = sc->tx_ant;
+
+		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0);
+	}
+
+	data->m = m0;
+	data->ni = ni;
+
+	rt2560_setup_tx_desc(sc, desc, RT2560_TX_IFS_NEWBACKOFF |
+	    RT2560_TX_TIMESTAMP, m0->m_pkthdr.len, rate, 0, segs->ds_addr);
+
+	DPRINTFN(10, ("sending beacon frame len=%u idx=%u rate=%u\n",
+	    m0->m_pkthdr.len, sc->bcnq.cur, rate));
+
+	bus_dmamap_sync(sc->bcnq.data_dmat, data->map, BUS_DMASYNC_PREWRITE);
+	bus_dmamap_sync(sc->bcnq.desc_dmat, sc->bcnq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+
+	sc->bcnq.cur = (sc->bcnq.cur + 1) % RT2560_BEACON_RING_COUNT;
+
+	return 0;
+}
+
+static int
+rt2560_tx_mgt(struct rt2560_softc *sc, struct mbuf *m0,
+    struct ieee80211_node *ni)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct rt2560_tx_desc *desc;
+	struct rt2560_tx_data *data;
+	struct ieee80211_frame *wh;
+	bus_dma_segment_t segs[RT2560_MAX_SCATTER];
+	uint16_t dur;
+	uint32_t flags = 0;
+	int nsegs, rate, error;
+
+	desc = &sc->prioq.desc[sc->prioq.cur];
+	data = &sc->prioq.data[sc->prioq.cur];
+
+	rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 12 : 2;
+
+	error = bus_dmamap_load_mbuf_sg(sc->prioq.data_dmat, data->map, m0,
+	    segs, &nsegs, 0);
+	if (error != 0) {
+		device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
+		    error);
+		m_freem(m0);
+		return error;
+	}
+
+	if (sc->sc_drvbpf != NULL) {
+		struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap;
+
+		tap->wt_flags = 0;
+		tap->wt_rate = rate;
+		tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
+		tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
+		tap->wt_antenna = sc->tx_ant;
+
+		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0);
+	}
+
+	data->m = m0;
+	data->ni = ni;
+
+	wh = mtod(m0, struct ieee80211_frame *);
+
+	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
+		flags |= RT2560_TX_ACK;
+
+		dur = rt2560_txtime(RAL_ACK_SIZE, rate, ic->ic_flags) +
+		      RAL_SIFS;
+		*(uint16_t *)wh->i_dur = htole16(dur);
+
+		/* tell hardware to add timestamp for probe responses */
+		if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
+		    IEEE80211_FC0_TYPE_MGT &&
+		    (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) ==
+		    IEEE80211_FC0_SUBTYPE_PROBE_RESP)
+			flags |= RT2560_TX_TIMESTAMP;
+	}
+
+	rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 0,
+	    segs->ds_addr);
+
+	bus_dmamap_sync(sc->prioq.data_dmat, data->map, BUS_DMASYNC_PREWRITE);
+	bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+
+	DPRINTFN(10, ("sending mgt frame len=%u idx=%u rate=%u\n",
+	    m0->m_pkthdr.len, sc->prioq.cur, rate));
+
+	/* kick prio */
+	sc->prioq.queued++;
+	sc->prioq.cur = (sc->prioq.cur + 1) % RT2560_PRIO_RING_COUNT;
+	RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_PRIO);
+
+	return 0;
+}
+
+/*
+ * Build a RTS control frame.
+ */
+static struct mbuf *
+rt2560_get_rts(struct rt2560_softc *sc, struct ieee80211_frame *wh,
+    uint16_t dur)
+{
+	struct ieee80211_frame_rts *rts;
+	struct mbuf *m;
+
+	MGETHDR(m, M_DONTWAIT, MT_DATA);
+	if (m == NULL) {
+		sc->sc_ic.ic_stats.is_tx_nobuf++;
+		device_printf(sc->sc_dev, "could not allocate RTS frame\n");
+		return NULL;
+	}
+
+	rts = mtod(m, struct ieee80211_frame_rts *);
+
+	rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL |
+	    IEEE80211_FC0_SUBTYPE_RTS;
+	rts->i_fc[1] = IEEE80211_FC1_DIR_NODS;
+	*(uint16_t *)rts->i_dur = htole16(dur);
+	IEEE80211_ADDR_COPY(rts->i_ra, wh->i_addr1);
+	IEEE80211_ADDR_COPY(rts->i_ta, wh->i_addr2);
+
+	m->m_pkthdr.len = m->m_len = sizeof (struct ieee80211_frame_rts);
+
+	return m;
+}
+
+static int
+rt2560_tx_data(struct rt2560_softc *sc, struct mbuf *m0,
+    struct ieee80211_node *ni)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct rt2560_tx_desc *desc;
+	struct rt2560_tx_data *data;
+	struct rt2560_node *rn;
+	struct ieee80211_rateset *rs;
+	struct ieee80211_frame *wh;
+	struct ieee80211_key *k;
+	struct mbuf *mnew;
+	bus_dma_segment_t segs[RT2560_MAX_SCATTER];
+	uint16_t dur;
+	uint32_t flags = 0;
+	int nsegs, rate, error;
+
+	wh = mtod(m0, struct ieee80211_frame *);
+
+	if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE) {
+		rs = &ic->ic_sup_rates[ic->ic_curmode];
+		rate = rs->rs_rates[ic->ic_fixed_rate];
+	} else {
+		rs = &ni->ni_rates;
+		rn = (struct rt2560_node *)ni;
+		ni->ni_txrate = ral_rssadapt_choose(&rn->rssadapt, rs, wh,
+		    m0->m_pkthdr.len, NULL, 0);
+		rate = rs->rs_rates[ni->ni_txrate];
+	}
+	rate &= IEEE80211_RATE_VAL;
+
+	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
+		k = ieee80211_crypto_encap(ic, ni, m0);
+		if (k == NULL) {
+			m_freem(m0);
+			return ENOBUFS;
+		}
+
+		/* packet header may have moved, reset our local pointer */
+		wh = mtod(m0, struct ieee80211_frame *);
+	}
+
+	/*
+	 * IEEE Std 802.11-1999, pp 82: "A STA shall use an RTS/CTS exchange
+	 * for directed frames only when the length of the MPDU is greater
+	 * than the length threshold indicated by [...]" ic_rtsthreshold.
+	 */
+	if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
+	    m0->m_pkthdr.len > ic->ic_rtsthreshold) {
+		struct mbuf *m;
+		uint16_t dur;
+		int rtsrate, ackrate;
+
+		rtsrate = IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 12 : 2;
+		ackrate = rt2560_ack_rate(ic, rate);
+
+		dur = rt2560_txtime(m0->m_pkthdr.len + 4, rate, ic->ic_flags) +
+		      rt2560_txtime(RAL_CTS_SIZE, rtsrate, ic->ic_flags) +
+		      rt2560_txtime(RAL_ACK_SIZE, ackrate, ic->ic_flags) +
+		      3 * RAL_SIFS;
+
+		m = rt2560_get_rts(sc, wh, dur);
+
+		desc = &sc->txq.desc[sc->txq.cur_encrypt];
+		data = &sc->txq.data[sc->txq.cur_encrypt];
+
+		error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map,
+		    m, segs, &nsegs, 0);
+		if (error != 0) {
+			device_printf(sc->sc_dev,
+			    "could not map mbuf (error %d)\n", error);
+			m_freem(m);
+			m_freem(m0);
+			return error;
+		}
+
+		/* avoid multiple free() of the same node for each fragment */
+		ieee80211_ref_node(ni);
+
+		data->m = m;
+		data->ni = ni;
+
+		/* RTS frames are not taken into account for rssadapt */
+		data->id.id_node = NULL;
+
+		rt2560_setup_tx_desc(sc, desc, RT2560_TX_ACK |
+		    RT2560_TX_MORE_FRAG, m->m_pkthdr.len, rtsrate, 1,
+		    segs->ds_addr);
+
+		bus_dmamap_sync(sc->txq.data_dmat, data->map,
+		    BUS_DMASYNC_PREWRITE);
+
+		sc->txq.queued++;
+		sc->txq.cur_encrypt =
+		    (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT;
+
+		/*
+		 * IEEE Std 802.11-1999: when an RTS/CTS exchange is used, the
+		 * asynchronous data frame shall be transmitted after the CTS
+		 * frame and a SIFS period.
+		 */
+		flags |= RT2560_TX_LONG_RETRY | RT2560_TX_IFS_SIFS;
+	}
+
+	data = &sc->txq.data[sc->txq.cur_encrypt];
+	desc = &sc->txq.desc[sc->txq.cur_encrypt];
+
+	error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map, m0,
+	    segs, &nsegs, 0);
+	if (error != 0 && error != EFBIG) {
+		device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
+		    error);
+		m_freem(m0);
+		return error;
+	}
+	if (error != 0) {
+		mnew = m_defrag(m0, M_DONTWAIT);
+		if (mnew == NULL) {
+			device_printf(sc->sc_dev,
+			    "could not defragment mbuf\n");
+			m_freem(m0);
+			return ENOBUFS;
+		}
+		m0 = mnew;
+
+		error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map,
+		    m0, segs, &nsegs, 0);
+		if (error != 0) {
+			device_printf(sc->sc_dev,
+			    "could not map mbuf (error %d)\n", error);
+			m_freem(m0);
+			return error;
+		}
+
+		/* packet header may have moved, reset our local pointer */
+		wh = mtod(m0, struct ieee80211_frame *);
+	}
+
+	if (sc->sc_drvbpf != NULL) {
+		struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap;
+
+		tap->wt_flags = 0;
+		tap->wt_rate = rate;
+		tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
+		tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
+		tap->wt_antenna = sc->tx_ant;
+
+		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0);
+	}
+
+	data->m = m0;
+	data->ni = ni;
+
+	/* remember link conditions for rate adaptation algorithm */
+	if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) {
+		data->id.id_len = m0->m_pkthdr.len;
+		data->id.id_rateidx = ni->ni_txrate;
+		data->id.id_node = ni;
+		data->id.id_rssi = ni->ni_rssi;
+	} else
+		data->id.id_node = NULL;
+
+	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
+		flags |= RT2560_TX_ACK;
+
+		dur = rt2560_txtime(RAL_ACK_SIZE, rt2560_ack_rate(ic, rate),
+		    ic->ic_flags) + RAL_SIFS;
+		*(uint16_t *)wh->i_dur = htole16(dur);
+	}
+
+	rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 1,
+	    segs->ds_addr);
+
+	bus_dmamap_sync(sc->txq.data_dmat, data->map, BUS_DMASYNC_PREWRITE);
+	bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map,
+	    BUS_DMASYNC_PREWRITE);
+
+	DPRINTFN(10, ("sending data frame len=%u idx=%u rate=%u\n",
+	    m0->m_pkthdr.len, sc->txq.cur_encrypt, rate));
+
+	/* kick encrypt */
+	sc->txq.queued++;
+	sc->txq.cur_encrypt = (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT;
+	RAL_WRITE(sc, RT2560_SECCSR1, RT2560_KICK_ENCRYPT);
+
+	return 0;
+}
+
+static void
+rt2560_start(struct ifnet *ifp)
+{
+	struct rt2560_softc *sc = ifp->if_softc;
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct mbuf *m0;
+	struct ether_header *eh;
+	struct ieee80211_node *ni;
+
+	RAL_LOCK(sc);
+
+	for (;;) {
+		IF_POLL(&ic->ic_mgtq, m0);
+		if (m0 != NULL) {
+			if (sc->prioq.queued >= RT2560_PRIO_RING_COUNT) {
+				ifp->if_drv_flags |= IFF_DRV_OACTIVE;
+				break;
+			}
+			IF_DEQUEUE(&ic->ic_mgtq, m0);
+
+			ni = (struct ieee80211_node *)m0->m_pkthdr.rcvif;
+			m0->m_pkthdr.rcvif = NULL;
+
+			if (ic->ic_rawbpf != NULL)
+				bpf_mtap(ic->ic_rawbpf, m0);
+
+			if (rt2560_tx_mgt(sc, m0, ni) != 0)
+				break;
+
+		} else {
+			if (ic->ic_state != IEEE80211_S_RUN)
+				break;
+			IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
+			if (m0 == NULL)
+				break;
+			if (sc->txq.queued >= RT2560_TX_RING_COUNT - 1) {
+				IFQ_DRV_PREPEND(&ifp->if_snd, m0);
+				ifp->if_drv_flags |= IFF_DRV_OACTIVE;
+				break;
+			}
+
+			if (m0->m_len < sizeof (struct ether_header) &&
+			    !(m0 = m_pullup(m0, sizeof (struct ether_header))))
+				continue;
+
+			eh = mtod(m0, struct ether_header *);
+			ni = ieee80211_find_txnode(ic, eh->ether_dhost);
+			if (ni == NULL) {
+				m_freem(m0);
+				continue;
+			}
+			BPF_MTAP(ifp, m0);
+
+			m0 = ieee80211_encap(ic, m0, ni);
+			if (m0 == NULL) {
+				ieee80211_free_node(ni);
+				continue;
+			}
+
+			if (ic->ic_rawbpf != NULL)
+				bpf_mtap(ic->ic_rawbpf, m0);
+
+			if (rt2560_tx_data(sc, m0, ni) != 0) {
+				ieee80211_free_node(ni);
+				ifp->if_oerrors++;
+				break;
+			}
+		}
+
+		sc->sc_tx_timer = 5;
+		ifp->if_timer = 1;
+	}
+
+	RAL_UNLOCK(sc);
+}
+
+static void
+rt2560_watchdog(struct ifnet *ifp)
+{
+	struct rt2560_softc *sc = ifp->if_softc;
+	struct ieee80211com *ic = &sc->sc_ic;
+
+	RAL_LOCK(sc);
+
+	ifp->if_timer = 0;
+
+	if (sc->sc_tx_timer > 0) {
+		if (--sc->sc_tx_timer == 0) {
+			device_printf(sc->sc_dev, "device timeout\n");
+			rt2560_init(sc);
+			ifp->if_oerrors++;
+			RAL_UNLOCK(sc);
+			return;
+		}
+		ifp->if_timer = 1;
+	}
+
+	ieee80211_watchdog(ic);
+
+	RAL_UNLOCK(sc);
+}
+
+/*
+ * This function allows for fast channel switching in monitor mode (used by
+ * net-mgmt/kismet). In IBSS mode, we must explicitly reset the interface to
+ * generate a new beacon frame.
+ */
+static int
+rt2560_reset(struct ifnet *ifp)
+{
+	struct rt2560_softc *sc = ifp->if_softc;
+	struct ieee80211com *ic = &sc->sc_ic;
+
+	if (ic->ic_opmode != IEEE80211_M_MONITOR)
+		return ENETRESET;
+
+	rt2560_set_chan(sc, ic->ic_curchan);
+
+	return 0;
+}
+
+static int
+rt2560_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
+{
+	struct rt2560_softc *sc = ifp->if_softc;
+	struct ieee80211com *ic = &sc->sc_ic;
+	int error = 0;
+
+	RAL_LOCK(sc);
+
+	switch (cmd) {
+	case SIOCSIFFLAGS:
+		if (ifp->if_flags & IFF_UP) {
+			if (ifp->if_drv_flags & IFF_DRV_RUNNING)
+				rt2560_update_promisc(sc);
+			else
+				rt2560_init(sc);
+		} else {
+			if (ifp->if_drv_flags & IFF_DRV_RUNNING)
+				rt2560_stop(sc);
+		}
+		break;
+
+	default:
+		error = ieee80211_ioctl(ic, cmd, data);
+	}
+
+	if (error == ENETRESET) {
+		if ((ifp->if_flags & IFF_UP) &&
+		    (ifp->if_drv_flags & IFF_DRV_RUNNING) &&
+		    (ic->ic_roaming != IEEE80211_ROAMING_MANUAL))
+			rt2560_init(sc);
+		error = 0;
+	}
+
+	RAL_UNLOCK(sc);
+
+	return error;
+}
+
+static void
+rt2560_bbp_write(struct rt2560_softc *sc, uint8_t reg, uint8_t val)
+{
+	uint32_t tmp;
+	int ntries;
+
+	for (ntries = 0; ntries < 100; ntries++) {
+		if (!(RAL_READ(sc, RT2560_BBPCSR) & RT2560_BBP_BUSY))
+			break;
+		DELAY(1);
+	}
+	if (ntries == 100) {
+		device_printf(sc->sc_dev, "could not write to BBP\n");
+		return;
+	}
+
+	tmp = RT2560_BBP_WRITE | RT2560_BBP_BUSY | reg << 8 | val;
+	RAL_WRITE(sc, RT2560_BBPCSR, tmp);
+
+	DPRINTFN(15, ("BBP R%u <- 0x%02x\n", reg, val));
+}
+
+static uint8_t
+rt2560_bbp_read(struct rt2560_softc *sc, uint8_t reg)
+{
+	uint32_t val;
+	int ntries;
+
+	val = RT2560_BBP_BUSY | reg << 8;
+	RAL_WRITE(sc, RT2560_BBPCSR, val);
+
+	for (ntries = 0; ntries < 100; ntries++) {
+		val = RAL_READ(sc, RT2560_BBPCSR);
+		if (!(val & RT2560_BBP_BUSY))
+			return val & 0xff;
+		DELAY(1);
+	}
+
+	device_printf(sc->sc_dev, "could not read from BBP\n");
+	return 0;
+}
+
+static void
+rt2560_rf_write(struct rt2560_softc *sc, uint8_t reg, uint32_t val)
+{
+	uint32_t tmp;
+	int ntries;
+
+	for (ntries = 0; ntries < 100; ntries++) {
+		if (!(RAL_READ(sc, RT2560_RFCSR) & RT2560_RF_BUSY))
+			break;
+		DELAY(1);
+	}
+	if (ntries == 100) {
+		device_printf(sc->sc_dev, "could not write to RF\n");
+		return;
+	}
+
+	tmp = RT2560_RF_BUSY | RT2560_RF_20BIT | (val & 0xfffff) << 2 |
+	    (reg & 0x3);
+	RAL_WRITE(sc, RT2560_RFCSR, tmp);
+
+	/* remember last written value in sc */
+	sc->rf_regs[reg] = val;
+
+	DPRINTFN(15, ("RF R[%u] <- 0x%05x\n", reg & 0x3, val & 0xfffff));
+}
+
+static void
+rt2560_set_chan(struct rt2560_softc *sc, struct ieee80211_channel *c)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	uint8_t power, tmp;
+	u_int i, chan;
+
+	chan = ieee80211_chan2ieee(ic, c);
+	if (chan == 0 || chan == IEEE80211_CHAN_ANY)
+		return;
+
+	if (IEEE80211_IS_CHAN_2GHZ(c))
+		power = min(sc->txpow[chan - 1], 31);
+	else
+		power = 31;
+
+	/* adjust txpower using ifconfig settings */
+	power -= (100 - ic->ic_txpowlimit) / 8;
+
+	DPRINTFN(2, ("setting channel to %u, txpower to %u\n", chan, power));
+
+	switch (sc->rf_rev) {
+	case RT2560_RF_2522:
+		rt2560_rf_write(sc, RAL_RF1, 0x00814);
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2522_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040);
+		break;
+
+	case RT2560_RF_2523:
+		rt2560_rf_write(sc, RAL_RF1, 0x08804);
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2523_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x38044);
+		rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286);
+		break;
+
+	case RT2560_RF_2524:
+		rt2560_rf_write(sc, RAL_RF1, 0x0c808);
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2524_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040);
+		rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286);
+		break;
+
+	case RT2560_RF_2525:
+		rt2560_rf_write(sc, RAL_RF1, 0x08808);
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525_hi_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044);
+		rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286);
+
+		rt2560_rf_write(sc, RAL_RF1, 0x08808);
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044);
+		rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286);
+		break;
+
+	case RT2560_RF_2525E:
+		rt2560_rf_write(sc, RAL_RF1, 0x08808);
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525e_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044);
+		rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00286 : 0x00282);
+		break;
+
+	case RT2560_RF_2526:
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2526_hi_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381);
+		rt2560_rf_write(sc, RAL_RF1, 0x08804);
+
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf2526_r2[chan - 1]);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044);
+		rt2560_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381);
+		break;
+
+	/* dual-band RF */
+	case RT2560_RF_5222:
+		for (i = 0; rt2560_rf5222[i].chan != chan; i++);
+
+		rt2560_rf_write(sc, RAL_RF1, rt2560_rf5222[i].r1);
+		rt2560_rf_write(sc, RAL_RF2, rt2560_rf5222[i].r2);
+		rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040);
+		rt2560_rf_write(sc, RAL_RF4, rt2560_rf5222[i].r4);
+		break;
+	}
+
+	if (ic->ic_state != IEEE80211_S_SCAN) {
+		/* set Japan filter bit for channel 14 */
+		tmp = rt2560_bbp_read(sc, 70);
+
+		tmp &= ~RT2560_JAPAN_FILTER;
+		if (chan == 14)
+			tmp |= RT2560_JAPAN_FILTER;
+
+		rt2560_bbp_write(sc, 70, tmp);
+
+		/* clear CRC errors */
+		RAL_READ(sc, RT2560_CNT0);
+	}
+}
+
+#if 0
+/*
+ * Disable RF auto-tuning.
+ */
+static void
+rt2560_disable_rf_tune(struct rt2560_softc *sc)
+{
+	uint32_t tmp;
+
+	if (sc->rf_rev != RT2560_RF_2523) {
+		tmp = sc->rf_regs[RAL_RF1] & ~RAL_RF1_AUTOTUNE;
+		rt2560_rf_write(sc, RAL_RF1, tmp);
+	}
+
+	tmp = sc->rf_regs[RAL_RF3] & ~RAL_RF3_AUTOTUNE;
+	rt2560_rf_write(sc, RAL_RF3, tmp);
+
+	DPRINTFN(2, ("disabling RF autotune\n"));
+}
+#endif
+
+/*
+ * Refer to IEEE Std 802.11-1999 pp. 123 for more information on TSF
+ * synchronization.
+ */
+static void
+rt2560_enable_tsf_sync(struct rt2560_softc *sc)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+	uint16_t logcwmin, preload;
+	uint32_t tmp;
+
+	/* first, disable TSF synchronization */
+	RAL_WRITE(sc, RT2560_CSR14, 0);
+
+	tmp = 16 * ic->ic_bss->ni_intval;
+	RAL_WRITE(sc, RT2560_CSR12, tmp);
+
+	RAL_WRITE(sc, RT2560_CSR13, 0);
+
+	logcwmin = 5;
+	preload = (ic->ic_opmode == IEEE80211_M_STA) ? 384 : 1024;
+	tmp = logcwmin << 16 | preload;
+	RAL_WRITE(sc, RT2560_BCNOCSR, tmp);
+
+	/* finally, enable TSF synchronization */
+	tmp = RT2560_ENABLE_TSF | RT2560_ENABLE_TBCN;
+	if (ic->ic_opmode == IEEE80211_M_STA)
+		tmp |= RT2560_ENABLE_TSF_SYNC(1);
+	else
+		tmp |= RT2560_ENABLE_TSF_SYNC(2) |
+		       RT2560_ENABLE_BEACON_GENERATOR;
+	RAL_WRITE(sc, RT2560_CSR14, tmp);
+
+	DPRINTF(("enabling TSF synchronization\n"));
+}
+
+static void
+rt2560_update_plcp(struct rt2560_softc *sc)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+
+	/* no short preamble for 1Mbps */
+	RAL_WRITE(sc, RT2560_PLCP1MCSR, 0x00700400);
+
+	if (!(ic->ic_flags & IEEE80211_F_SHPREAMBLE)) {
+		/* values taken from the reference driver */
+		RAL_WRITE(sc, RT2560_PLCP2MCSR,   0x00380401);
+		RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x00150402);
+		RAL_WRITE(sc, RT2560_PLCP11MCSR,  0x000b8403);
+	} else {
+		/* same values as above or'ed 0x8 */
+		RAL_WRITE(sc, RT2560_PLCP2MCSR,   0x00380409);
+		RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x0015040a);
+		RAL_WRITE(sc, RT2560_PLCP11MCSR,  0x000b840b);
+	}
+
+	DPRINTF(("updating PLCP for %s preamble\n",
+	    (ic->ic_flags & IEEE80211_F_SHPREAMBLE) ? "short" : "long"));
+}
+
+/*
+ * This function can be called by ieee80211_set_shortslottime(). Refer to
+ * IEEE Std 802.11-1999 pp. 85 to know how these values are computed.
+ */
+static void
+rt2560_update_slot(struct ifnet *ifp)
+{
+	struct rt2560_softc *sc = ifp->if_softc;
+	struct ieee80211com *ic = &sc->sc_ic;
+	uint8_t slottime;
+	uint16_t tx_sifs, tx_pifs, tx_difs, eifs;
+	uint32_t tmp;
+
+	slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
+
+	/* update the MAC slot boundaries */
+	tx_sifs = RAL_SIFS - RT2560_TXRX_TURNAROUND;
+	tx_pifs = tx_sifs + slottime;
+	tx_difs = tx_sifs + 2 * slottime;
+	eifs = (ic->ic_curmode == IEEE80211_MODE_11B) ? 364 : 60;
+
+	tmp = RAL_READ(sc, RT2560_CSR11);
+	tmp = (tmp & ~0x1f00) | slottime << 8;
+	RAL_WRITE(sc, RT2560_CSR11, tmp);
+
+	tmp = tx_pifs << 16 | tx_sifs;
+	RAL_WRITE(sc, RT2560_CSR18, tmp);
+
+	tmp = eifs << 16 | tx_difs;
+	RAL_WRITE(sc, RT2560_CSR19, tmp);
+
+	DPRINTF(("setting slottime to %uus\n", slottime));
+}
+
+static void
+rt2560_set_basicrates(struct rt2560_softc *sc)
+{
+	struct ieee80211com *ic = &sc->sc_ic;
+
+	/* update basic rate set */
+	if (ic->ic_curmode == IEEE80211_MODE_11B) {
+		/* 11b basic rates: 1, 2Mbps */
+		RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x3);
+	} else if (IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan)) {
+		/* 11a basic rates: 6, 12, 24Mbps */
+		RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x150);
+	} else {
+		/* 11g basic rates: 1, 2, 5.5, 11, 6, 12, 24Mbps */
+		RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x15f);
+	}
+}
+
+static void
+rt2560_update_led(struct rt2560_softc *sc, int led1, int led2)
+{
+	uint32_t tmp;
+
+	/* set ON period to 70ms and OFF period to 30ms */
+	tmp = led1 << 16 | led2 << 17 | 70 << 8 | 30;
+	RAL_WRITE(sc, RT2560_LEDCSR, tmp);
+}
+
+static void
+rt2560_set_bssid(struct rt2560_softc *sc, uint8_t *bssid)
+{
+	uint32_t tmp;
+
+	tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24;
+	RAL_WRITE(sc, RT2560_CSR5, tmp);
+
+	tmp = bssid[4] | bssid[5] << 8;
+	RAL_WRITE(sc, RT2560_CSR6, tmp);
+
+	DPRINTF(("setting BSSID to %6D\n", bssid, ":"));
+}
+
+static void
+rt2560_set_macaddr(struct rt2560_softc *sc, uint8_t *addr)
+{
+	uint32_t tmp;
+
+	tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24;
+	RAL_WRITE(sc, RT2560_CSR3, tmp);
+
+	tmp = addr[4] | addr[5] << 8;
+	RAL_WRITE(sc, RT2560_CSR4, tmp);
+
+	DPRINTF(("setting MAC address to %6D\n", addr, ":"));
+}
+
+static void
+rt2560_get_macaddr(struct rt2560_softc *sc, uint8_t *addr)
+{
+	uint32_t tmp;
+
+	tmp = RAL_READ(sc, RT2560_CSR3);
+	addr[0] = tmp & 0xff;
+	addr[1] = (tmp >>  8) & 0xff;
+	addr[2] = (tmp >> 16) & 0xff;
+	addr[3] = (tmp >> 24);
+
+	tmp = RAL_READ(sc, RT2560_CSR4);
+	addr[4] = tmp & 0xff;
+	addr[5] = (tmp >> 8) & 0xff;
+}
+
+static void
+rt2560_update_promisc(struct rt2560_softc *sc)
+{
+	struct ifnet *ifp = sc->sc_ic.ic_ifp;
+	uint32_t tmp;
+
+	tmp = RAL_READ(sc, RT2560_RXCSR0);
+
+	tmp &= ~RT2560_DROP_NOT_TO_ME;
+	if (!(ifp->if_flags & IFF_PROMISC))
+		tmp |= RT2560_DROP_NOT_TO_ME;
+
+	RAL_WRITE(sc, RT2560_RXCSR0, tmp);
+
+	DPRINTF(("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ?
+	    "entering" : "leaving"));
+}
+
+static const char *
+rt2560_get_rf(int rev)
+{
+	switch (rev) {
+	case RT2560_RF_2522:	return "RT2522";
+	case RT2560_RF_2523:	return "RT2523";
+	case RT2560_RF_2524:	return "RT2524";
+	case RT2560_RF_2525:	return "RT2525";
+	case RT2560_RF_2525E:	return "RT2525e";
+	case RT2560_RF_2526:	return "RT2526";
+	case RT2560_RF_5222:	return "RT5222";
+	default:		return "unknown";
+	}
+}
+
+static void
+rt2560_read_eeprom(struct rt2560_softc *sc)
+{
+	uint16_t val;
+	int i;
+
+	val = rt2560_eeprom_read(sc, RT2560_EEPROM_CONFIG0);
+	sc->rf_rev =   (val >> 11) & 0x7;
+	sc->hw_radio = (val >> 10) & 0x1;
+	sc->led_mode = (val >> 6)  & 0x7;
+	sc->rx_ant =   (val >> 4)  & 0x3;
+	sc->tx_ant =   (val >> 2)  & 0x3;
+	sc->nb_ant =   val & 0x3;
+
+	/* read default values for BBP registers */
+	for (i = 0; i < 16; i++) {
+		val = rt2560_eeprom_read(sc, RT2560_EEPROM_BBP_BASE + i);
+		sc->bbp_prom[i].reg = val >> 8;
+		sc->bbp_prom[i].val = val & 0xff;
+	}
+
+	/* read Tx power for all b/g channels */
+	for (i = 0; i < 14 / 2; i++) {
+		val = rt2560_eeprom_read(sc, RT2560_EEPROM_TXPOWER + i);
+		sc->txpow[i * 2] = val >> 8;
+		sc->txpow[i * 2 + 1] = val & 0xff;
+	}
+}
+
+static int
+rt2560_bbp_init(struct rt2560_softc *sc)
+{
+#define N(a)	(sizeof (a) / sizeof ((a)[0]))
+	int i, ntries;
+
+	/* wait for BBP to be ready */
+	for (ntries = 0; ntries < 100; ntries++) {
+		if (rt2560_bbp_read(sc, RT2560_BBP_VERSION) != 0)
+			break;
+		DELAY(1);
+	}
+	if (ntries == 100) {
+		device_printf(sc->sc_dev, "timeout waiting for BBP\n");
+		return EIO;
+	}
+
+	/* initialize BBP registers to default values */
+	for (i = 0; i < N(rt2560_def_bbp); i++) {
+		rt2560_bbp_write(sc, rt2560_def_bbp[i].reg,
+		    rt2560_def_bbp[i].val);
+	}
+#if 0
+	/* initialize BBP registers to values stored in EEPROM */
+	for (i = 0; i < 16; i++) {
+		if (sc->bbp_prom[i].reg == 0xff)
+			continue;
+		rt2560_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val);
+	}
+#endif
+
+	return 0;
+#undef N
+}
+
+static void
+rt2560_set_txantenna(struct rt2560_softc *sc, int antenna)
+{
+	uint32_t tmp;
+	uint8_t tx;
+
+	tx = rt2560_bbp_read(sc, RT2560_BBP_TX) & ~RT2560_BBP_ANTMASK;
+	if (antenna == 1)
+		tx |= RT2560_BBP_ANTA;
+	else if (antenna == 2)
+		tx |= RT2560_BBP_ANTB;
+	else
+		tx |= RT2560_BBP_DIVERSITY;
+
+	/* need to force I/Q flip for RF 2525e, 2526 and 5222 */
+	if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526 ||
+	    sc->rf_rev == RT2560_RF_5222)
+		tx |= RT2560_BBP_FLIPIQ;
+
+	rt2560_bbp_write(sc, RT2560_BBP_TX, tx);
+
+	/* update values for CCK and OFDM in BBPCSR1 */
+	tmp = RAL_READ(sc, RT2560_BBPCSR1) & ~0x00070007;
+	tmp |= (tx & 0x7) << 16 | (tx & 0x7);
+	RAL_WRITE(sc, RT2560_BBPCSR1, tmp);
+}
+
+static void
+rt2560_set_rxantenna(struct rt2560_softc *sc, int antenna)
+{
+	uint8_t rx;
+
+	rx = rt2560_bbp_read(sc, RT2560_BBP_RX) & ~RT2560_BBP_ANTMASK;
+	if (antenna == 1)
+		rx |= RT2560_BBP_ANTA;
+	else if (antenna == 2)
+		rx |= RT2560_BBP_ANTB;
+	else
+		rx |= RT2560_BBP_DIVERSITY;
+
+	/* need to force no I/Q flip for RF 2525e and 2526 */
+	if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526)
+		rx &= ~RT2560_BBP_FLIPIQ;
+
+	rt2560_bbp_write(sc, RT2560_BBP_RX, rx);
+}
+
+static void
+rt2560_init(void *priv)
+{
+#define N(a)	(sizeof (a) / sizeof ((a)[0]))
+	struct rt2560_softc *sc = priv;
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ifnet *ifp = ic->ic_ifp;
+	uint32_t tmp;
+	int i;
+
+	rt2560_stop(sc);
+
+	/* setup tx rings */
+	tmp = RT2560_PRIO_RING_COUNT << 24 |
+	      RT2560_ATIM_RING_COUNT << 16 |
+	      RT2560_TX_RING_COUNT   <<  8 |
+	      RT2560_TX_DESC_SIZE;
+
+	/* rings must be initialized in this exact order */
+	RAL_WRITE(sc, RT2560_TXCSR2, tmp);
+	RAL_WRITE(sc, RT2560_TXCSR3, sc->txq.physaddr);
+	RAL_WRITE(sc, RT2560_TXCSR5, sc->prioq.physaddr);
+	RAL_WRITE(sc, RT2560_TXCSR4, sc->atimq.physaddr);
+	RAL_WRITE(sc, RT2560_TXCSR6, sc->bcnq.physaddr);
+
+	/* setup rx ring */
+	tmp = RT2560_RX_RING_COUNT << 8 | RT2560_RX_DESC_SIZE;
+
+	RAL_WRITE(sc, RT2560_RXCSR1, tmp);
+	RAL_WRITE(sc, RT2560_RXCSR2, sc->rxq.physaddr);
+
+	/* initialize MAC registers to default values */
+	for (i = 0; i < N(rt2560_def_mac); i++)
+		RAL_WRITE(sc, rt2560_def_mac[i].reg, rt2560_def_mac[i].val);
+
+	IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
+	rt2560_set_macaddr(sc, ic->ic_myaddr);
+
+	/* set basic rate set (will be updated later) */
+	RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x153);
+
+	rt2560_set_txantenna(sc, sc->tx_ant);
+	rt2560_set_rxantenna(sc, sc->rx_ant);
+	rt2560_update_slot(ifp);
+	rt2560_update_plcp(sc);
+	rt2560_update_led(sc, 0, 0);
+
+	RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC);
+	RAL_WRITE(sc, RT2560_CSR1, RT2560_HOST_READY);
+
+	if (rt2560_bbp_init(sc) != 0) {
+		rt2560_stop(sc);
+		return;
+	}
+
+	/* set default BSS channel */
+	rt2560_set_chan(sc, ic->ic_curchan);
+
+	/* kick Rx */
+	tmp = RT2560_DROP_PHY_ERROR | RT2560_DROP_CRC_ERROR;
+	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
+		tmp |= RT2560_DROP_CTL | RT2560_DROP_VERSION_ERROR;
+		if (ic->ic_opmode != IEEE80211_M_HOSTAP)
+			tmp |= RT2560_DROP_TODS;
+		if (!(ifp->if_flags & IFF_PROMISC))
+			tmp |= RT2560_DROP_NOT_TO_ME;
+	}
+	RAL_WRITE(sc, RT2560_RXCSR0, tmp);
+
+	/* clear old FCS and Rx FIFO errors */
+	RAL_READ(sc, RT2560_CNT0);
+	RAL_READ(sc, RT2560_CNT4);
+
+	/* clear any pending interrupts */
+	RAL_WRITE(sc, RT2560_CSR7, 0xffffffff);
+
+	/* enable interrupts */
+	RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK);
+
+	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
+	ifp->if_drv_flags |= IFF_DRV_RUNNING;
+
+	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
+		if (ic->ic_roaming != IEEE80211_ROAMING_MANUAL)
+			ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
+	} else
+		ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
+#undef N
+}
+
+void
+rt2560_stop(void *priv)
+{
+	struct rt2560_softc *sc = priv;
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ifnet *ifp = ic->ic_ifp;
+
+	ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
+
+	sc->sc_tx_timer = 0;
+	ifp->if_timer = 0;
+	ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
+
+	/* abort Tx */
+	RAL_WRITE(sc, RT2560_TXCSR0, RT2560_ABORT_TX);
+
+	/* disable Rx */
+	RAL_WRITE(sc, RT2560_RXCSR0, RT2560_DISABLE_RX);
+
+	/* reset ASIC (imply reset BBP) */
+	RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC);
+	RAL_WRITE(sc, RT2560_CSR1, 0);
+
+	/* disable interrupts */
+	RAL_WRITE(sc, RT2560_CSR8, 0xffffffff);
+
+	/* reset Tx and Rx rings */
+	rt2560_reset_tx_ring(sc, &sc->txq);
+	rt2560_reset_tx_ring(sc, &sc->atimq);
+	rt2560_reset_tx_ring(sc, &sc->prioq);
+	rt2560_reset_tx_ring(sc, &sc->bcnq);
+	rt2560_reset_rx_ring(sc, &sc->rxq);
+}