5 files changed, 384 insertions, 0 deletions

diff --git a/usr.bin/sasc/INSTALL b/usr.bin/sasc/INSTALL
new file mode 100644
index 000000000000..448a7a28d363
--- /dev/null
+++ b/usr.bin/sasc/INSTALL
@@ -0,0 +1,86 @@
+To install the device driver, please do the following steps:
+
+1. Install the files by copying them as listed in the following table:
+
+	asc.c		/usr/sys/i386/isa/
+	ascreg.h	/usr/sys/i386/isa/
+	asc_ioctl.h	/usr/sys/i386/include/
+
+   Note that if you have copies of the system header directories
+   in /usr/include/ instead of symbolic links, you have to copy
+   `asc.h' to /usr/include/machine/ also. I recommend to replace
+   the copies by links though.
+
+[the following steps, 2..5, can be achieved by moving to
+ /sys/i386 and doing "patch < diffs.asc"]
+
+2. Make the driver source known to config(8) by editing the file 
+   /usr/src/sys/i386/conf/files.i386. Just append the following line:
+
+	i386/isa/asc.c	optional	asc	device-driver
+
+3. Include a driver access record in /usr/src/sys/i386/i386/conf.c 
+   Append the following structure at the end of the array that
+   contains the *character* device drivers. Remember the major number
+   that will be used for the driver, i.e. the number following the
+   number af the preceeding record.
+
+	{ ascopen,	ascclose,	ascread,	nowrite, /*<major>*/
+	  ascioctl,	nostop,		nullreset,	nodevtotty, /* asc */
+	  ascselect,	nommap,		NULL },
+
+4. Insert the definitions for the base port addresses of the device
+   into the file /usr/src/sys/i386/isa/isa.h:
+
+#define IO_ASC1         0x3EB 		/* AmiScan addr.grp. 1 */
+#define IO_ASC2         0x22B 		/* AmiScan addr.grp. 2 */
+#define IO_ASC3         0x26B 		/* AmiScan addr.grp. 3 */
+#define IO_ASC4         0x2AB 		/* AmiScan addr.grp. 4 */
+#define IO_ASC5         0x2EB 		/* AmiScan addr.grp. 5 */
+#define IO_ASC6         0x32B 		/* AmiScan addr.grp. 6 */
+#define IO_ASC7         0x36B 		/* AmiScan addr.grp. 7 */
+#define IO_ASC8         0x3AB 		/* AmiScan addr.grp. 8 */
+
+5. Patch /dev/MAKEDEV by adding the following lines in the switch to
+   create the device entries:
+
+	asc*)
+	      rm -f asc0       
+	      mknod asc0 c 68 0
+	      mknod asc0p c 68 8      
+	      chmod 666 asc0 asc0p
+	      chown root.wheel asc0 asc0p     
+	      ;;
+  
+
+
+6. Edit your kernel configuration file (in /usr/src/sys/i386/conf/)
+   by inserting the following line:
+
+	device	asc0	at isa? port 0x2ab tty drq 3 irq 10 vector ascintr
+
+   This should usually work for you as it reflects the factory
+   settings of the AMI scanner. However, if this conflicts with
+   any other device on your system, you have the option to change
+   `drq 3' into `drq 1' or `drq 5' and the actual port value to
+   "IO_ASC1".. "IO_ASC8" as defined in isa.h
+
+7. Rebuild the kernel, don't forget to config(8) and `make depend' first.
+
+8. Make the following device nodes:
+
+	mknod /dev/asc0   c <major> 0
+	mknod /dev/asc0p  c <major> 8
+
+   (or, cd /dev and do ./MAKEDEV asc0).
+
+   If you plan to modify the and debug the driver, add these (you
+   won't need these though, unless you know how to get this
+   information from elsewhere.
+
+	mknod /dev/asc0d  c <major> 32
+	mknod /dev/asc0pd c <major> 40
+
+9. Install the new kernel and reboot. You can try the driver by
+   doing a simple "cat /dev/asc0p > myfile.pbm" and then trying
+   to display the PBM image with xv or some other tool.
diff --git a/usr.bin/sasc/Makefile b/usr.bin/sasc/Makefile
new file mode 100644
index 000000000000..022cd27731d8
--- /dev/null
+++ b/usr.bin/sasc/Makefile
@@ -0,0 +1,5 @@
+#	@(#)Makefile	8.1 (Berkeley) 6/6/93
+
+PROG=	sasc
+
+.include <bsd.prog.mk>
diff --git a/usr.bin/sasc/README b/usr.bin/sasc/README
new file mode 100644
index 000000000000..5436bd27171b
--- /dev/null
+++ b/usr.bin/sasc/README
@@ -0,0 +1,9 @@
+ASC - A device driver for a handy scanner
+
+This is a device driver for GI1904-based hand scanners, e.g. the Trust
+Amiscan Grey and possibly others. The driver is based on the "gsc"
+driver and, partly, on a  Linux driver.
+
+The driver has a working select().
+
+-Luigi Rizzo (luigi@iet.unipi.it)
diff --git a/usr.bin/sasc/sasc.1 b/usr.bin/sasc/sasc.1
new file mode 100644
index 000000000000..76af185d5af9
--- /dev/null
+++ b/usr.bin/sasc/sasc.1
@@ -0,0 +1,91 @@
+.\" sasc(1) - manual page for the `asc' scanner device driver utility
+.\"
+.\"
+.\" Copyright (c) 1995 Gunther Schadow.  All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"	This product includes software developed by Gunther Schadow.
+.\" 4. The name of the author may not be used to endorse or promote products
+.\"    derived from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.TH SASC 1 "January 6, 1995" FreeBSD "FreeBSD Reference Manual"
+.SH NAME
+\fBsasc\fP - set the options of the asc scanner device
+.SH SYNOPSIS
+.TP 5
+\fBsasc\fP
+[\fB-sq\fP]
+[\fB-b\fP\ \fIlen\fP]
+[\fB-f\fP\ \fIfile\fP]
+[\fB-h\fP\ \fIheight\fP]
+[\fB-r\fP\ \fIresolution\fP]
+[\fB-t\fP\ \fItimeout\fP]
+[\fB-w\fP\ \fIwidth\fP]
+.SH DESCRIPTION
+The \fBsasc\fP utility provides shell level access to the ioctl
+requests served by the handy scanner device driver asc. Please see
+asc(4) for the exact meaning of the requests.  Generally they modify
+the output and behaviour of the asc scanner device. When \fBsasc\fP is
+called with no option only the current settings are reported.
+.SH OPTIONS
+.TP 3
+\fB-s\fP [ASC_SRESSW]
+Set the scanner with the values of the resolution selector switch.
+.TP
+\fB-q\fP
+Operate in quiet mode, i.e. do not report any of the current setings.
+Normally the parameters are shown after the modifications have been
+performed.
+.TP
+\fB-f\fP \fIfile\fP
+Operate on a different scanner device node given by filename. Note
+that even though there may exist more than one node of scanner device
+several of them will refer the same device unit. The modifications are
+performed od the unit regardless of the device node by which it is
+accessed.
+.TP
+\fB-r\fP \fIresolution\fP [ASC_SRES]
+Set the resolution in dpi.
+.TP
+\fB-w\fP \fIwidth\fP [ASC_SWIDHT]
+Set the width of the bitmap in pixels.
+.TP
+\fB-h\fP \fIheight\fP [ASC_SHEIGHT]
+Set the height of the bitmap in lines of pixels.
+.TP
+\fB-b\fP \fIlen\fP [ASC_SBLEN]
+Set the internal dma buffer to be \fIlen\fP lines in size.
+.TP
+\fB-t\fP \fItimeout\fP [ASC_SBTIME]
+Set the timeout time for reading one dma buffer.
+.SH FILES
+.TP 15
+.BI /dev/asc0
+device node for \fIraw\fP output.
+.TP
+.BI /dev/asc0p
+device node for output in \fIpbm\fP file format.
+.PB
+.SH SEE ALSO
+asc(4)
+.SH AUTHOR
+Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>
diff --git a/usr.bin/sasc/sasc.c b/usr.bin/sasc/sasc.c
new file mode 100644
index 000000000000..40346be20655
--- /dev/null
+++ b/usr.bin/sasc/sasc.c
@@ -0,0 +1,193 @@
+/* sasc(1) - utility for the `asc' scanner device driver
+ *
+ *
+ * Copyright (c) 1995 Gunther Schadow.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Gunther Schadow.
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/file.h>
+#include <sys/ioctl.h>
+#include <machine/asc_ioctl.h>
+
+#ifndef DEFAULT_FILE
+#define DEFAULT_FILE "/dev/asc0"
+#endif
+#ifdef FAIL
+#undef FAIL
+#endif
+#define FAIL -1
+
+usage(char *progn)
+{
+  fprintf(stderr, "usage: %s [-sq] [-f file] [-r dpi] "
+	  "[-w width] [-h height] "
+	  "[-b len] [-t time]\n", progn);
+  exit(1);
+}
+
+int
+main(int argc, char **argv)
+{
+  char c;
+  int fd;
+
+  char *file = DEFAULT_FILE;
+  
+  int show_dpi     = 0;
+  int show_width   = 0;
+  int show_height  = 0;
+  int show_blen    = 0;
+  int show_btime   = 0;
+  int show_all     = 1;
+
+  int set_blen     = 0;
+  int set_dpi      = 0;
+  int set_width    = 0;
+  int set_height   = 0;
+  int set_btime    = 0;
+  int set_switch   = 0;
+
+  char *progn = *argv;
+  
+  if (argc == 0) usage(progn);
+
+  while( (c = getopt(argc, argv, "sqf:b:r:w:h:t:")) != FAIL)
+    {
+      switch(c) {
+      case 'f': file = optarg; break;
+      case 'r': set_dpi = atoi(optarg); break;
+      case 'w': set_width = atoi(optarg); break;
+      case 'h': set_height = atoi(optarg); break;
+      case 'b': set_blen = atoi(optarg); break;
+      case 't': set_btime = atoi(optarg); break;
+      case 's': set_switch = 1; break;
+      case 'q': show_all = 0; break;
+      default: usage(progn);
+      }
+    }
+
+  fd = open(file, O_RDONLY);
+  if ( fd == FAIL )
+  {
+    perror(file);
+    exit(1);
+  }
+
+  if (set_switch != 0)
+    {
+      if(ioctl(fd, ASC_SRESSW) == FAIL)
+	{
+	  perror("ASC_SRESSW");
+	  exit(1);
+	}
+    }
+
+  if (set_dpi != 0)
+    {
+      if(ioctl(fd, ASC_SRES, &set_dpi) == FAIL)
+	{
+	  perror("ASC_SRES");
+	  exit(1);
+	}
+    }
+
+  if (set_width != 0)
+    {
+      if(ioctl(fd, ASC_SWIDTH, &set_width) == FAIL)
+	{
+	  perror("ASC_SWIDTH");
+	  exit(1);
+	}
+    }
+
+  if (set_height != 0)
+    {
+      if(ioctl(fd, ASC_SHEIGHT, &set_height) == FAIL)
+	{
+	  perror("ASC_SHEIGHT");
+	  exit(1);
+	}
+    }
+
+  if (set_blen != 0)
+    {
+      if(ioctl(fd, ASC_SBLEN, &set_blen) == FAIL)
+	{
+	  perror("ASC_SBLEN");
+	  exit(1);
+	}
+    }
+
+  if (set_btime != 0)
+    {
+      if(ioctl(fd, ASC_SBTIME, &set_btime) == FAIL)
+	{
+	  perror("ASC_SBTIME");
+	  exit(1);
+	}
+    }
+
+  if (show_all != 0)
+    {
+      if(ioctl(fd, ASC_GRES,  &show_dpi) == FAIL)
+	{
+	  perror("ASC_GRES");
+	  exit(1);
+	}
+      if(ioctl(fd, ASC_GWIDTH,  &show_width) == FAIL)
+	{
+	  perror("ASC_GWIDTH");
+	  exit(1);
+	}
+      if(ioctl(fd, ASC_GHEIGHT,  &show_height) == FAIL)
+	{
+	  perror("ASC_GHEIGHT");
+	  exit(1);
+	}
+      if(ioctl(fd, ASC_GBLEN, &show_blen) == FAIL)
+	{
+	  perror("ASC_GBLEN");
+	  exit(1);
+	}
+      if(ioctl(fd, ASC_GBTIME, &show_btime) == FAIL)
+	{
+	  perror("ASC_GBTIME");
+	  exit(1);
+	}
+
+      printf("%s:\n", file);
+      printf("resolution\t %d dpi\n", show_dpi);
+      printf("width\t\t %d\n", show_width);
+      printf("height\t\t %d\n",show_height);
+      printf("buffer length\t %d\n", show_blen);
+      printf("buffer timeout\t %d\n", show_btime);
+    }
+
+  return 0;
+}