aboutsummaryrefslogtreecommitdiff
path: root/Bindings/net
diff options
context:
space:
mode:
Diffstat (limited to 'Bindings/net')
-rw-r--r--Bindings/net/can/rcar_canfd.txt4
-rw-r--r--Bindings/net/dsa/b53.txt1
-rw-r--r--Bindings/net/dsa/marvell.txt11
-rw-r--r--Bindings/net/ethernet.txt2
-rw-r--r--Bindings/net/fsl-tsec-phy.txt6
-rw-r--r--Bindings/net/ieee802154/mcr20a.txt23
-rw-r--r--Bindings/net/macb.txt1
-rw-r--r--Bindings/net/marvell-pp2.txt9
-rw-r--r--Bindings/net/meson-dwmac.txt5
-rw-r--r--Bindings/net/micrel-ksz90x1.txt7
-rw-r--r--Bindings/net/nixge.txt32
-rw-r--r--Bindings/net/renesas,ravb.txt2
-rw-r--r--Bindings/net/sff,sfp.txt5
-rw-r--r--Bindings/net/socionext,uniphier-ave4.txt1
-rw-r--r--Bindings/net/ti,dp83867.txt2
15 files changed, 102 insertions, 9 deletions
diff --git a/Bindings/net/can/rcar_canfd.txt b/Bindings/net/can/rcar_canfd.txt
index 93c3a6ae32f9..ac71daa46195 100644
--- a/Bindings/net/can/rcar_canfd.txt
+++ b/Bindings/net/can/rcar_canfd.txt
@@ -5,7 +5,9 @@ Required properties:
- compatible: Must contain one or more of the following:
- "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
- "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
- - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller.
+ - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
+ - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
+ - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first, followed by the
diff --git a/Bindings/net/dsa/b53.txt b/Bindings/net/dsa/b53.txt
index 8acf51a4dfa8..47a6a7fe0b86 100644
--- a/Bindings/net/dsa/b53.txt
+++ b/Bindings/net/dsa/b53.txt
@@ -10,6 +10,7 @@ Required properties:
"brcm,bcm53128"
"brcm,bcm5365"
"brcm,bcm5395"
+ "brcm,bcm5389"
"brcm,bcm5397"
"brcm,bcm5398"
diff --git a/Bindings/net/dsa/marvell.txt b/Bindings/net/dsa/marvell.txt
index 8c033d48e2ba..60d50a2b0323 100644
--- a/Bindings/net/dsa/marvell.txt
+++ b/Bindings/net/dsa/marvell.txt
@@ -13,9 +13,18 @@ placed as a child node of an mdio device.
The properties described here are those specific to Marvell devices.
Additional required and optional properties can be found in dsa.txt.
+The compatibility string is used only to find an identification register,
+which is at a different MDIO base address in different switch families.
+- "marvell,mv88e6085" : Switch has base address 0x10. Use with models:
+ 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
+ 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
+ 6341, 6350, 6351, 6352
+- "marvell,mv88e6190" : Switch has base address 0x00. Use with models:
+ 6190, 6190X, 6191, 6290, 6390, 6390X
+
Required properties:
- compatible : Should be one of "marvell,mv88e6085" or
- "marvell,mv88e6190"
+ "marvell,mv88e6190" as indicated above
- reg : Address on the MII bus for the switch.
Optional properties:
diff --git a/Bindings/net/ethernet.txt b/Bindings/net/ethernet.txt
index 2974e63ba311..cfc376bc977a 100644
--- a/Bindings/net/ethernet.txt
+++ b/Bindings/net/ethernet.txt
@@ -10,6 +10,8 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt.
the boot program; should be used in cases where the MAC address assigned to
the device by the boot program is different from the "local-mac-address"
property;
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address;
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used;
- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
the maximum frame size (there's contradiction in the Devicetree
diff --git a/Bindings/net/fsl-tsec-phy.txt b/Bindings/net/fsl-tsec-phy.txt
index 594982c6b9f9..79bf352e659c 100644
--- a/Bindings/net/fsl-tsec-phy.txt
+++ b/Bindings/net/fsl-tsec-phy.txt
@@ -6,7 +6,11 @@ the definition of the PHY node in booting-without-of.txt for an example
of how to define a PHY.
Required properties:
- - reg : Offset and length of the register set for the device
+ - reg : Offset and length of the register set for the device, and optionally
+ the offset and length of the TBIPA register (TBI PHY address
+ register). If TBIPA register is not specified, the driver will
+ attempt to infer it from the register set specified (your mileage may
+ vary).
- compatible : Should define the compatible device type for the
mdio. Currently supported strings/devices are:
- "fsl,gianfar-tbi"
diff --git a/Bindings/net/ieee802154/mcr20a.txt b/Bindings/net/ieee802154/mcr20a.txt
new file mode 100644
index 000000000000..2aaef567c5be
--- /dev/null
+++ b/Bindings/net/ieee802154/mcr20a.txt
@@ -0,0 +1,23 @@
+* MCR20A IEEE 802.15.4 *
+
+Required properties:
+ - compatible: should be "nxp,mcr20a"
+ - spi-max-frequency: maximal bus speed, should be set to a frequency
+ lower than 9000000 depends sync or async operation mode
+ - reg: the chipselect index
+ - interrupts: the interrupt generated by the device. Non high-level
+ can occur deadlocks while handling isr.
+
+Optional properties:
+ - rst_b-gpio: GPIO spec for the RST_B pin
+
+Example:
+
+ mcr20a@0 {
+ compatible = "nxp,mcr20a";
+ spi-max-frequency = <9000000>;
+ reg = <0>;
+ interrupts = <17 2>;
+ interrupt-parent = <&gpio>;
+ rst_b-gpio = <&gpio 27 1>
+ };
diff --git a/Bindings/net/macb.txt b/Bindings/net/macb.txt
index 27966ae741e0..457d5ae16f23 100644
--- a/Bindings/net/macb.txt
+++ b/Bindings/net/macb.txt
@@ -29,6 +29,7 @@ Optional properties for PHY child node:
- reset-gpios : Should specify the gpio for phy reset
- magic-packet : If present, indicates that the hardware supports waking
up via magic packet.
+- phy-handle : see ethernet.txt file in the same directory
Examples:
diff --git a/Bindings/net/marvell-pp2.txt b/Bindings/net/marvell-pp2.txt
index 1814fa13f6ab..fc019df0d863 100644
--- a/Bindings/net/marvell-pp2.txt
+++ b/Bindings/net/marvell-pp2.txt
@@ -21,9 +21,10 @@ Required properties:
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
+ - MG Core clock (only for armada-7k-pp2)
- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
- and "axi_clk" (the 2 latter only for armada-7k-pp2).
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
+ "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
The ethernet ports are represented by subnodes. At least one port is
required.
@@ -80,8 +81,8 @@ cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
- <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
- clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
+ <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Bindings/net/meson-dwmac.txt b/Bindings/net/meson-dwmac.txt
index 354dd9896bb5..61cada22ae6c 100644
--- a/Bindings/net/meson-dwmac.txt
+++ b/Bindings/net/meson-dwmac.txt
@@ -9,6 +9,7 @@ Required properties on all platforms:
- compatible: Depending on the platform this should be one of:
- "amlogic,meson6-dwmac"
- "amlogic,meson8b-dwmac"
+ - "amlogic,meson8m2-dwmac"
- "amlogic,meson-gxbb-dwmac"
Additionally "snps,dwmac" and any applicable more
detailed version number described in net/stmmac.txt
@@ -19,13 +20,13 @@ Required properties on all platforms:
configuration (for example the PRG_ETHERNET register range
on Meson8b and newer)
-Required properties on Meson8b and newer:
+Required properties on Meson8b, Meson8m2, GXBB and newer:
- clock-names: Should contain the following:
- "stmmaceth" - see stmmac.txt
- "clkin0" - first parent clock of the internal mux
- "clkin1" - second parent clock of the internal mux
-Optional properties on Meson8b and newer:
+Optional properties on Meson8b, Meson8m2, GXBB and newer:
- amlogic,tx-delay-ns: The internal RGMII TX clock delay (provided
by this driver) in nanoseconds. Allowed values
are: 0ns, 2ns, 4ns, 6ns.
diff --git a/Bindings/net/micrel-ksz90x1.txt b/Bindings/net/micrel-ksz90x1.txt
index 42a248301615..e22d8cfea687 100644
--- a/Bindings/net/micrel-ksz90x1.txt
+++ b/Bindings/net/micrel-ksz90x1.txt
@@ -57,6 +57,13 @@ KSZ9031:
- txd2-skew-ps : Skew control of TX data 2 pad
- txd3-skew-ps : Skew control of TX data 3 pad
+ - micrel,force-master:
+ Boolean, force phy to master mode. Only set this option if the phy
+ reference clock provided at CLK125_NDO pin is used as MAC reference
+ clock because the clock jitter in slave mode is to high (errata#2).
+ Attention: The link partner must be configurable as slave otherwise
+ no link will be established.
+
Examples:
mdio {
diff --git a/Bindings/net/nixge.txt b/Bindings/net/nixge.txt
new file mode 100644
index 000000000000..e55af7f0881a
--- /dev/null
+++ b/Bindings/net/nixge.txt
@@ -0,0 +1,32 @@
+* NI XGE Ethernet controller
+
+Required properties:
+- compatible: Should be "ni,xge-enet-2.00"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain tx and rx interrupt
+- interrupt-names: Should be "rx" and "tx"
+- phy-mode: See ethernet.txt file in the same directory.
+- phy-handle: See ethernet.txt file in the same directory.
+- nvmem-cells: Phandle of nvmem cell containing the MAC address
+- nvmem-cell-names: Should be "address"
+
+Examples (10G generic PHY):
+ nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-2.00";
+ reg = <0x40000000 0x6000>;
+
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+ phy-handle = <&ethernet_phy1>;
+
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
diff --git a/Bindings/net/renesas,ravb.txt b/Bindings/net/renesas,ravb.txt
index b4dc455eb155..890526dbfc26 100644
--- a/Bindings/net/renesas,ravb.txt
+++ b/Bindings/net/renesas,ravb.txt
@@ -7,6 +7,7 @@ Required properties:
- compatible: Must contain one or more of the following:
- "renesas,etheravb-r8a7743" for the R8A7743 SoC.
- "renesas,etheravb-r8a7745" for the R8A7745 SoC.
+ - "renesas,etheravb-r8a77470" for the R8A77470 SoC.
- "renesas,etheravb-r8a7790" for the R8A7790 SoC.
- "renesas,etheravb-r8a7791" for the R8A7791 SoC.
- "renesas,etheravb-r8a7792" for the R8A7792 SoC.
@@ -17,6 +18,7 @@ Required properties:
- "renesas,etheravb-r8a7795" for the R8A7795 SoC.
- "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+ - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
- "renesas,etheravb-r8a77970" for the R8A77970 SoC.
- "renesas,etheravb-r8a77980" for the R8A77980 SoC.
- "renesas,etheravb-r8a77995" for the R8A77995 SoC.
diff --git a/Bindings/net/sff,sfp.txt b/Bindings/net/sff,sfp.txt
index f1c441bedf68..929591d52ed6 100644
--- a/Bindings/net/sff,sfp.txt
+++ b/Bindings/net/sff,sfp.txt
@@ -33,6 +33,10 @@ Optional Properties:
Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
high Tx rate. Must not be present for SFF modules
+- maximum-power-milliwatt : Maximum module power consumption
+ Specifies the maximum power consumption allowable by a module in the
+ slot, in milli-Watts. Presently, modules can be up to 1W, 1.5W or 2W.
+
Example #1: Direct serdes to SFP connection
sfp_eth3: sfp-eth3 {
@@ -40,6 +44,7 @@ sfp_eth3: sfp-eth3 {
i2c-bus = <&sfp_1g_i2c>;
los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <1000>;
pinctrl-names = "default";
pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
diff --git a/Bindings/net/socionext,uniphier-ave4.txt b/Bindings/net/socionext,uniphier-ave4.txt
index 270ea4efff13..96398cc2982f 100644
--- a/Bindings/net/socionext,uniphier-ave4.txt
+++ b/Bindings/net/socionext,uniphier-ave4.txt
@@ -9,6 +9,7 @@ Required properties:
- "socionext,uniphier-pxs2-ave4" : for PXs2 SoC
- "socionext,uniphier-ld11-ave4" : for LD11 SoC
- "socionext,uniphier-ld20-ave4" : for LD20 SoC
+ - "socionext,uniphier-pxs3-ave4" : for PXs3 SoC
- reg: Address where registers are mapped and size of region.
- interrupts: Should contain the MAC interrupt.
- phy-mode: See ethernet.txt in the same directory. Allow to choose
diff --git a/Bindings/net/ti,dp83867.txt b/Bindings/net/ti,dp83867.txt
index 02c4353b5cf2..9ef9338aaee1 100644
--- a/Bindings/net/ti,dp83867.txt
+++ b/Bindings/net/ti,dp83867.txt
@@ -25,6 +25,8 @@ Optional property:
software needs to take when this pin is
strapped in these modes. See data manual
for details.
+ - ti,clk-output-sel - Muxing option for CLK_OUT pin - see dt-bindings/net/ti-dp83867.h
+ for applicable values.
Note: ti,min-output-impedance and ti,max-output-impedance are mutually
exclusive. When both properties are present ti,max-output-impedance
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 07:08:31 +0000