1 files changed, 129 insertions, 0 deletions
diff --git a/Bindings/pinctrl/qcom,apq8084-pinctrl.yaml b/Bindings/pinctrl/qcom,apq8084-pinctrl.yaml
new file mode 100644
index 000000000000..38877d8b97ff
--- /dev/null
+++ b/Bindings/pinctrl/qcom,apq8084-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,apq8084-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. APQ8084 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm APQ8084 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,apq8084-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-apq8084-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-apq8084-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-apq8084-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+                blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+                blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
+                blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+                blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+                blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
+                blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
+                blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+                blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6,
+                blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10,
+                blsp_uart11, blsp_uart12, blsp_uim1, blsp_uim2,
+                blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7,
+                blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
+                blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+                cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gcc_obt, gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2,
+                gp0_clk, gp1_clk, gpio, hdmi_cec, hdmi_ddc, hdmi_dtest,
+                hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update,
+                mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst, pci_e1,
+                pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
+                qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
+                sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
+                spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s,
+                tsif1, tsif2, uim, uim_batt_alarm ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@fd510000 {
+        compatible = "qcom,apq8084-pinctrl";
+        reg = <0xfd510000 0x4000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 147>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-state {
+            rx-pins {
+                pins = "gpio5";
+                function = "blsp_uart2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio4";
+                function = "blsp_uart2";
+                bias-disable;
+            };
+        };
+    };