diff options
Diffstat (limited to 'Bindings/sound/renesas,rsnd.txt')
| -rw-r--r-- | Bindings/sound/renesas,rsnd.txt | 520 |
1 files changed, 0 insertions, 520 deletions
diff --git a/Bindings/sound/renesas,rsnd.txt b/Bindings/sound/renesas,rsnd.txt index b39743d3f7c4..b731f16aea84 100644 --- a/Bindings/sound/renesas,rsnd.txt +++ b/Bindings/sound/renesas,rsnd.txt @@ -253,523 +253,3 @@ This is example of TDM 6ch. Driver can automatically switches TDM <-> stereo mode in this case. see "Example: simple sound card for TDM" - -============================================= -Required properties: -============================================= - -- compatible : "renesas,rcar_sound-<soctype>", fallbacks - "renesas,rcar_sound-gen1" if generation1, and - "renesas,rcar_sound-gen2" if generation2 (or RZ/G1) - "renesas,rcar_sound-gen3" if generation3 (or RZ/G2) - Examples with soctypes are: - - "renesas,rcar_sound-r8a7742" (RZ/G1H) - - "renesas,rcar_sound-r8a7743" (RZ/G1M) - - "renesas,rcar_sound-r8a7744" (RZ/G1N) - - "renesas,rcar_sound-r8a7745" (RZ/G1E) - - "renesas,rcar_sound-r8a77470" (RZ/G1C) - - "renesas,rcar_sound-r8a774a1" (RZ/G2M) - - "renesas,rcar_sound-r8a774b1" (RZ/G2N) - - "renesas,rcar_sound-r8a774c0" (RZ/G2E) - - "renesas,rcar_sound-r8a774e1" (RZ/G2H) - - "renesas,rcar_sound-r8a7778" (R-Car M1A) - - "renesas,rcar_sound-r8a7779" (R-Car H1) - - "renesas,rcar_sound-r8a7790" (R-Car H2) - - "renesas,rcar_sound-r8a7791" (R-Car M2-W) - - "renesas,rcar_sound-r8a7793" (R-Car M2-N) - - "renesas,rcar_sound-r8a7794" (R-Car E2) - - "renesas,rcar_sound-r8a7795" (R-Car H3) - - "renesas,rcar_sound-r8a7796" (R-Car M3-W) - - "renesas,rcar_sound-r8a77965" (R-Car M3-N) - - "renesas,rcar_sound-r8a77990" (R-Car E3) - - "renesas,rcar_sound-r8a77995" (R-Car D3) -- reg : Should contain the register physical address. - required register is - SRU/ADG/SSI if generation1 - SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3 - Select extended AUDIO-DMAC-periperi address if SoC has it, - otherwise select normal AUDIO-DMAC-periperi address. -- reg-names : Should contain the register names. - scu/adg/ssi if generation1 - scu/adg/ssiu/ssi/audmapp if generation2/generation3 -- rcar_sound,ssi : Should contain SSI feature. - The number of SSI subnode should be same as HW. - see below for detail. -- rcar_sound,ssiu : Should contain SSIU feature. - The number of SSIU subnode should be same as HW. - see below for detail. -- rcar_sound,src : Should contain SRC feature. - The number of SRC subnode should be same as HW. - see below for detail. -- rcar_sound,ctu : Should contain CTU feature. - The number of CTU subnode should be same as HW. - see below for detail. -- rcar_sound,mix : Should contain MIX feature. - The number of MIX subnode should be same as HW. - see below for detail. -- rcar_sound,dvc : Should contain DVC feature. - The number of DVC subnode should be same as HW. - see below for detail. -- rcar_sound,dai : DAI contents. - The number of DAI subnode should be same as HW. - see below for detail. -- #sound-dai-cells : it must be 0 if your system is using single DAI - it must be 1 if your system is using multi DAI -- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. -- clock-names : List of necessary clock names. - "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X", - "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i" - -Optional properties: -- #clock-cells : it must be 0 if your system has audio_clkout - it must be 1 if your system has audio_clkout0/1/2/3 -- clock-frequency : for all audio_clkout0/1/2/3 -- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn - is asynchronizes with lr-clock. -- resets : References to SSI resets. -- reset-names : List of valid reset names. - "ssi-all", "ssi.X" - -SSI subnode properties: -- interrupts : Should contain SSI interrupt for PIO transfer -- shared-pin : if shared clock pin -- pio-transfer : use PIO transfer mode -- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case -- dma : Should contain Audio DMAC entry -- dma-names : SSI case "rx" (=playback), "tx" (=capture) - Deprecated: see SSIU subnode properties - SSIU case "rxu" (=playback), "txu" (=capture) - -SSIU subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "rx" (=playback), "tx" (=capture) - -SRC subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "rx" (=playback), "tx" (=capture) - -DVC subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "tx" (=playback/capture) - -DAI subnode properties: -- playback : list of playback modules -- capture : list of capture modules - - -============================================= -Example: -============================================= - -rcar_sound: sound@ec500000 { - #sound-dai-cells = <1>; - compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - - clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, - <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, - <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, - <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, - <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, - <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, - <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, - <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, - <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, - <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, - <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; - clock-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", - "src.9", "src.8", "src.7", "src.6", "src.5", - "src.4", "src.3", "src.2", "src.1", "src.0", - "dvc.0", "dvc.1", - "clk_a", "clk_b", "clk_c", "clk_i"; - - rcar_sound,dvc { - dvc0: dvc-0 { - dmas = <&audma0 0xbc>; - dma-names = "tx"; - }; - dvc1: dvc-1 { - dmas = <&audma0 0xbe>; - dma-names = "tx"; - }; - }; - - rcar_sound,mix { - mix0: mix-0 { }; - mix1: mix-1 { }; - }; - - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - - rcar_sound,src { - src0: src-0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x85>, <&audma1 0x9a>; - dma-names = "rx", "tx"; - }; - src1: src-1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x87>, <&audma1 0x9c>; - dma-names = "rx", "tx"; - }; - src2: src-2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x89>, <&audma1 0x9e>; - dma-names = "rx", "tx"; - }; - src3: src-3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8b>, <&audma1 0xa0>; - dma-names = "rx", "tx"; - }; - src4: src-4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8d>, <&audma1 0xb0>; - dma-names = "rx", "tx"; - }; - src5: src-5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8f>, <&audma1 0xb2>; - dma-names = "rx", "tx"; - }; - src6: src-6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x91>, <&audma1 0xb4>; - dma-names = "rx", "tx"; - }; - src7: src-7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x93>, <&audma1 0xb6>; - dma-names = "rx", "tx"; - }; - src8: src-8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x95>, <&audma1 0xb8>; - dma-names = "rx", "tx"; - }; - src9: src-9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x97>, <&audma1 0xba>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,ssiu { - ssiu00: ssiu-0 { - dmas = <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx"; - }; - ssiu01: ssiu-1 { - dmas = <&audma0 0x35>, <&audma1 0x36>; - dma-names = "rx", "tx"; - }; - - ... - - ssiu95: ssiu-49 { - dmas = <&audma0 0xA5>, <&audma1 0xA6>; - dma-names = "rx", "tx"; - }; - ssiu96: ssiu-50 { - dmas = <&audma0 0xA7>, <&audma1 0xA8>; - dma-names = "rx", "tx"; - }; - ssiu97: ssiu-51 { - dmas = <&audma0 0xA9>, <&audma1 0xAA>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>; - dma-names = "rx", "tx"; - }; - ssi1: ssi-1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>; - dma-names = "rx", "tx"; - }; - - ... - - ssi8: ssi-8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>; - dma-names = "rx", "tx"; - }; - ssi9: ssi-9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,dai { - dai0 { - playback = <&ssi5 &src5>; - capture = <&ssi6>; - }; - dai1 { - playback = <&ssi3>; - }; - dai2 { - capture = <&ssi4>; - }; - dai3 { - playback = <&ssi7>; - }; - dai4 { - capture = <&ssi8>; - }; - }; -}; - -============================================= -Example: simple sound card -============================================= - - rsnd_ak4643: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; - }; - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; - }; - }; -}; - -&ssi1 { - shared-pin; -}; - -============================================= -Example: simple sound card for Asynchronous mode -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - /* - * SRC Asynchronous mode setting - * Playback: - * All input data will be converted to 48kHz - * Capture: - * Inputed 48kHz data will be converted to - * system specified Hz - */ - simple-audio-card,convert-rate = <48000>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; -}; - -============================================= -Example: simple sound card for channel convert -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - /* - * CTU setting - * All input data will be converted to 2ch - * as output data - */ - simple-audio-card,convert-channels = <2>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; -}; - -============================================= -Example: simple sound card for MIXer -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - simple-audio-card,cpu@0 { - sound-dai = <&rcar_sound 0>; - }; - simple-audio-card,cpu@1 { - sound-dai = <&rcar_sound 1>; - }; - simple-audio-card,codec { - ... - }; -}; - -&rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; - }; - dai1 { - playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; - }; - }; -}; - -============================================= -Example: simple sound card for TDM -============================================= - -rsnd_tdm: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - dai-tdm-slot-num = <6>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&xxx>; - }; -}; - -============================================= -Example: simple sound card for TDM Split -============================================= - -sound_card: sound { - compatible = "audio-graph-scu-card"; - prefix = "xxxx"; - routing = "xxxx Playback", "DAI0 Playback", - "xxxx Playback", "DAI1 Playback", - "xxxx Playback", "DAI2 Playback", - "xxxx Playback", "DAI3 Playback"; - convert-channels = <8>; /* TDM Split */ - - dais = <&rsnd_port0 /* playback ch1/ch2 */ - &rsnd_port1 /* playback ch3/ch4 */ - &rsnd_port2 /* playback ch5/ch6 */ - &rsnd_port3 /* playback ch7/ch8 */ - >; -}; - -audio-codec { - ... - port { - codec_0: endpoint@1 { - remote-endpoint = <&rsnd_ep0>; - }; - codec_1: endpoint@2 { - remote-endpoint = <&rsnd_ep1>; - }; - codec_2: endpoint@3 { - remote-endpoint = <&rsnd_ep2>; - }; - codec_3: endpoint@4 { - remote-endpoint = <&rsnd_ep3>; - }; - }; -}; - -&rcar_sound { - ... - ports { - rsnd_port0: port@0 { - rsnd_ep0: endpoint { - remote-endpoint = <&codec_0>; - ... - playback = <&ssiu30 &ssi3>; - }; - }; - rsnd_port1: port@1 { - rsnd_ep1: endpoint { - remote-endpoint = <&codec_1>; - ... - playback = <&ssiu31 &ssi3>; - }; - }; - rsnd_port2: port@2 { - rsnd_ep2: endpoint { - remote-endpoint = <&codec_2>; - ... - playback = <&ssiu32 &ssi3>; - }; - }; - rsnd_port3: port@3 { - rsnd_ep3: endpoint { - remote-endpoint = <&codec_3>; - ... - playback = <&ssiu33 &ssi3>; - }; - }; - }; -}; - -============================================= -Example: simple sound card for Multi channel -============================================= - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>; - }; - }; -}; |