diff options
Diffstat (limited to 'MdePkg/Include/IndustryStandard/Scsi.h')
| -rw-r--r-- | MdePkg/Include/IndustryStandard/Scsi.h | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/MdePkg/Include/IndustryStandard/Scsi.h b/MdePkg/Include/IndustryStandard/Scsi.h new file mode 100644 index 000000000000..6de1cfd978e7 --- /dev/null +++ b/MdePkg/Include/IndustryStandard/Scsi.h @@ -0,0 +1,412 @@ +/** @file + Support for SCSI-2 standard + + Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __SCSI_H__ +#define __SCSI_H__ + +// +// SCSI command OP Code +// +// +// Commands for all device types +// +#define EFI_SCSI_OP_CHANGE_DEFINITION 0x40 +#define EFI_SCSI_OP_COMPARE 0x39 +#define EFI_SCSI_OP_COPY 0x18 +#define EFI_SCSI_OP_COPY_VERIFY 0x3a +#define EFI_SCSI_OP_INQUIRY 0x12 +#define EFI_SCSI_OP_LOG_SELECT 0x4c +#define EFI_SCSI_OP_LOG_SENSE 0x4d +#define EFI_SCSI_OP_MODE_SEL6 0x15 +#define EFI_SCSI_OP_MODE_SEL10 0x55 +#define EFI_SCSI_OP_MODE_SEN6 0x1a +#define EFI_SCSI_OP_MODE_SEN10 0x5a +#define EFI_SCSI_OP_READ_BUFFER 0x3c +#define EFI_SCSI_OP_RECEIVE_DIAG 0x1c +#define EFI_SCSI_OP_REQUEST_SENSE 0x03 +#define EFI_SCSI_OP_SEND_DIAG 0x1d +#define EFI_SCSI_OP_TEST_UNIT_READY 0x00 +#define EFI_SCSI_OP_WRITE_BUFF 0x3b + +// +// Additional commands for Direct Access Devices +// +#define EFI_SCSI_OP_FORMAT 0x04 +#define EFI_SCSI_OP_LOCK_UN_CACHE 0x36 +#define EFI_SCSI_OP_PREFETCH 0x34 +#define EFI_SCSI_OP_MEDIA_REMOVAL 0x1e +#define EFI_SCSI_OP_READ6 0x08 +#define EFI_SCSI_OP_READ10 0x28 +#define EFI_SCSI_OP_READ16 0x88 +#define EFI_SCSI_OP_READ_CAPACITY 0x25 +#define EFI_SCSI_OP_READ_CAPACITY16 0x9e +#define EFI_SCSI_OP_READ_DEFECT 0x37 +#define EFI_SCSI_OP_READ_LONG 0x3e +#define EFI_SCSI_OP_REASSIGN_BLK 0x07 +#define EFI_SCSI_OP_RELEASE 0x17 +#define EFI_SCSI_OP_REZERO 0x01 +#define EFI_SCSI_OP_SEARCH_DATA_E 0x31 +#define EFI_SCSI_OP_SEARCH_DATA_H 0x30 +#define EFI_SCSI_OP_SEARCH_DATA_L 0x32 +#define EFI_SCSI_OP_SEEK6 0x0b +#define EFI_SCSI_OP_SEEK10 0x2b +#define EFI_SCSI_OP_SEND_DIAG 0x1d +#define EFI_SCSI_OP_SET_LIMIT 0x33 +#define EFI_SCSI_OP_START_STOP_UNIT 0x1b +#define EFI_SCSI_OP_SYNC_CACHE 0x35 +#define EFI_SCSI_OP_VERIFY 0x2f +#define EFI_SCSI_OP_WRITE6 0x0a +#define EFI_SCSI_OP_WRITE10 0x2a +#define EFI_SCSI_OP_WRITE16 0x8a +#define EFI_SCSI_OP_WRITE_VERIFY 0x2e +#define EFI_SCSI_OP_WRITE_LONG 0x3f +#define EFI_SCSI_OP_WRITE_SAME 0x41 +#define EFI_SCSI_OP_UNMAP 0x42 + +// +// Additional commands for Sequential Access Devices +// +#define EFI_SCSI_OP_ERASE 0x19 +#define EFI_SCSI_OP_LOAD_UNLOAD 0x1b +#define EFI_SCSI_OP_LOCATE 0x2b +#define EFI_SCSI_OP_READ_BLOCK_LIMIT 0x05 +#define EFI_SCSI_OP_READ_POS 0x34 +#define EFI_SCSI_OP_READ_REVERSE 0x0f +#define EFI_SCSI_OP_RECOVER_BUF_DATA 0x14 +#define EFI_SCSI_OP_RESERVE_UNIT 0x16 +#define EFI_SCSI_OP_REWIND 0x01 +#define EFI_SCSI_OP_SPACE 0x11 +#define EFI_SCSI_OP_VERIFY_TAPE 0x13 +#define EFI_SCSI_OP_WRITE_FILEMARK 0x10 + +// +// Additional commands for Printer Devices +// +#define EFI_SCSI_OP_PRINT 0x0a +#define EFI_SCSI_OP_SLEW_PRINT 0x0b +#define EFI_SCSI_OP_STOP_PRINT 0x1b +#define EFI_SCSI_OP_SYNC_BUFF 0x10 + +// +// Additional commands for Processor Devices +// +#define EFI_SCSI_OP_RECEIVE 0x08 +#define EFI_SCSI_OP_SEND 0x0a + +// +// Additional commands for Write-Once Devices +// +#define EFI_SCSI_OP_MEDIUM_SCAN 0x38 +#define EFI_SCSI_OP_SEARCH_DAT_E10 0x31 +#define EFI_SCSI_OP_SEARCH_DAT_E12 0xb1 +#define EFI_SCSI_OP_SEARCH_DAT_H10 0x30 +#define EFI_SCSI_OP_SEARCH_DAT_H12 0xb0 +#define EFI_SCSI_OP_SEARCH_DAT_L10 0x32 +#define EFI_SCSI_OP_SEARCH_DAT_L12 0xb2 +#define EFI_SCSI_OP_SET_LIMIT10 0x33 +#define EFI_SCSI_OP_SET_LIMIT12 0xb3 +#define EFI_SCSI_OP_VERIFY10 0x2f +#define EFI_SCSI_OP_VERIFY12 0xaf +#define EFI_SCSI_OP_WRITE12 0xaa +#define EFI_SCSI_OP_WRITE_VERIFY10 0x2e +#define EFI_SCSI_OP_WRITE_VERIFY12 0xae + +// +// Additional commands for CD-ROM Devices +// +#define EFI_SCSI_OP_PLAY_AUD_10 0x45 +#define EFI_SCSI_OP_PLAY_AUD_12 0xa5 +#define EFI_SCSI_OP_PLAY_AUD_MSF 0x47 +#define EFI_SCSI_OP_PLAY_AUD_TKIN 0x48 +#define EFI_SCSI_OP_PLAY_TK_REL10 0x49 +#define EFI_SCSI_OP_PLAY_TK_REL12 0xa9 +#define EFI_SCSI_OP_READ_CD_CAPACITY 0x25 +#define EFI_SCSI_OP_READ_HEADER 0x44 +#define EFI_SCSI_OP_READ_SUB_CHANNEL 0x42 +#define EFI_SCSI_OP_READ_TOC 0x43 + +// +// Additional commands for Scanner Devices +// +#define EFI_SCSI_OP_GET_DATABUFF_STAT 0x34 +#define EFI_SCSI_OP_GET_WINDOW 0x25 +#define EFI_SCSI_OP_OBJECT_POS 0x31 +#define EFI_SCSI_OP_SCAN 0x1b +#define EFI_SCSI_OP_SET_WINDOW 0x24 + +// +// Additional commands for Optical Memory Devices +// +#define EFI_SCSI_OP_UPDATE_BLOCK 0x3d + +// +// Additional commands for Medium Changer Devices +// +#define EFI_SCSI_OP_EXCHANGE_MEDIUM 0xa6 +#define EFI_SCSI_OP_INIT_ELEMENT_STAT 0x07 +#define EFI_SCSI_OP_POS_TO_ELEMENT 0x2b +#define EFI_SCSI_OP_REQUEST_VE_ADDR 0xb5 +#define EFI_SCSI_OP_SEND_VOL_TAG 0xb6 + +// +// Additional commands for Communition Devices +// +#define EFI_SCSI_OP_GET_MESSAGE6 0x08 +#define EFI_SCSI_OP_GET_MESSAGE10 0x28 +#define EFI_SCSI_OP_GET_MESSAGE12 0xa8 +#define EFI_SCSI_OP_SEND_MESSAGE6 0x0a +#define EFI_SCSI_OP_SEND_MESSAGE10 0x2a +#define EFI_SCSI_OP_SEND_MESSAGE12 0xaa + +// +// SCSI Data Transfer Direction +// +#define EFI_SCSI_DATA_IN 0 +#define EFI_SCSI_DATA_OUT 1 + +// +// Peripheral Device Type Definitions +// +#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g. magnetic disk) +#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g. magnetic tape) +#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device +#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device +#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g. some optical disks) +#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD-ROM device +#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device +#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g. some optical disks) +#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer device (e.g. jukeboxes) +#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications device +#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8 (Graphic arts pre-press devices) +#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8 (Graphic arts pre-press devices) +// +// 0Ch - 1Eh are reserved +// +#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device type + +// +// Page Codes for INQUIRY command +// +#define EFI_SCSI_PAGE_CODE_SUPPORTED_VPD 0x00 +#define EFI_SCSI_PAGE_CODE_BLOCK_LIMITS_VPD 0xB0 + +#pragma pack(1) +/// +/// Standard INQUIRY data format +/// +typedef struct { + UINT8 Peripheral_Type : 5; + UINT8 Peripheral_Qualifier : 3; + UINT8 DeviceType_Modifier : 7; + UINT8 Rmb : 1; + UINT8 Version; + UINT8 Response_Data_Format; + UINT8 Addnl_Length; + UINT8 Reserved_5_95[95 - 5 + 1]; +} EFI_SCSI_INQUIRY_DATA; + +/// +/// Supported VPD Pages VPD page +/// +typedef struct { + UINT8 Peripheral_Type : 5; + UINT8 Peripheral_Qualifier : 3; + UINT8 PageCode; + UINT8 PageLength2; + UINT8 PageLength1; + UINT8 SupportedVpdPageList[0x100]; +} EFI_SCSI_SUPPORTED_VPD_PAGES_VPD_PAGE; + +/// +/// Block Limits VPD page +/// +typedef struct { + UINT8 Peripheral_Type : 5; + UINT8 Peripheral_Qualifier : 3; + UINT8 PageCode; + UINT8 PageLength2; + UINT8 PageLength1; + UINT8 WriteSameNonZero : 1; + UINT8 Reserved_4 : 7; + UINT8 MaximumCompareAndWriteLength; + UINT8 OptimalTransferLengthGranularity2; + UINT8 OptimalTransferLengthGranularity1; + UINT8 MaximumTransferLength4; + UINT8 MaximumTransferLength3; + UINT8 MaximumTransferLength2; + UINT8 MaximumTransferLength1; + UINT8 OptimalTransferLength4; + UINT8 OptimalTransferLength3; + UINT8 OptimalTransferLength2; + UINT8 OptimalTransferLength1; + UINT8 MaximumPrefetchXdreadXdwriteTransferLength4; + UINT8 MaximumPrefetchXdreadXdwriteTransferLength3; + UINT8 MaximumPrefetchXdreadXdwriteTransferLength2; + UINT8 MaximumPrefetchXdreadXdwriteTransferLength1; + UINT8 MaximumUnmapLbaCount4; + UINT8 MaximumUnmapLbaCount3; + UINT8 MaximumUnmapLbaCount2; + UINT8 MaximumUnmapLbaCount1; + UINT8 MaximumUnmapBlockDescriptorCount4; + UINT8 MaximumUnmapBlockDescriptorCount3; + UINT8 MaximumUnmapBlockDescriptorCount2; + UINT8 MaximumUnmapBlockDescriptorCount1; + UINT8 OptimalUnmapGranularity4; + UINT8 OptimalUnmapGranularity3; + UINT8 OptimalUnmapGranularity2; + UINT8 OptimalUnmapGranularity1; + UINT8 UnmapGranularityAlignment4 : 7; + UINT8 UnmapGranularityAlignmentValid : 1; + UINT8 UnmapGranularityAlignment3; + UINT8 UnmapGranularityAlignment2; + UINT8 UnmapGranularityAlignment1; + UINT8 MaximumWriteSameLength4; + UINT8 MaximumWriteSameLength3; + UINT8 MaximumWriteSameLength2; + UINT8 MaximumWriteSameLength1; + UINT8 MaximumAtomicTransferLength4; + UINT8 MaximumAtomicTransferLength3; + UINT8 MaximumAtomicTransferLength2; + UINT8 MaximumAtomicTransferLength1; + UINT8 AtomicAlignment4; + UINT8 AtomicAlignment3; + UINT8 AtomicAlignment2; + UINT8 AtomicAlignment1; + UINT8 AtomicTransferLengthGranularity4; + UINT8 AtomicTransferLengthGranularity3; + UINT8 AtomicTransferLengthGranularity2; + UINT8 AtomicTransferLengthGranularity1; + UINT8 MaximumAtomicTransferLengthWithAtomicBoundary4; + UINT8 MaximumAtomicTransferLengthWithAtomicBoundary3; + UINT8 MaximumAtomicTransferLengthWithAtomicBoundary2; + UINT8 MaximumAtomicTransferLengthWithAtomicBoundary1; + UINT8 MaximumAtomicBoundarySize4; + UINT8 MaximumAtomicBoundarySize3; + UINT8 MaximumAtomicBoundarySize2; + UINT8 MaximumAtomicBoundarySize1; +} EFI_SCSI_BLOCK_LIMITS_VPD_PAGE; + +/// +/// Error codes 70h and 71h sense data format +/// +typedef struct { + UINT8 Error_Code : 7; + UINT8 Valid : 1; + UINT8 Segment_Number; + UINT8 Sense_Key : 4; + UINT8 Reserved_21 : 1; + UINT8 Ili : 1; + UINT8 Reserved_22 : 2; + UINT8 Information_3_6[4]; + UINT8 Addnl_Sense_Length; ///< Additional sense length (n-7) + UINT8 Vendor_Specific_8_11[4]; + UINT8 Addnl_Sense_Code; ///< Additional sense code + UINT8 Addnl_Sense_Code_Qualifier; ///< Additional sense code qualifier + UINT8 Field_Replaceable_Unit_Code; ///< Field replaceable unit code + UINT8 Reserved_15_17[3]; +} EFI_SCSI_SENSE_DATA; + +/// +/// SCSI Disk READ CAPACITY Data +/// +typedef struct { + UINT8 LastLba3; + UINT8 LastLba2; + UINT8 LastLba1; + UINT8 LastLba0; + UINT8 BlockSize3; + UINT8 BlockSize2; + UINT8 BlockSize1; + UINT8 BlockSize0; +} EFI_SCSI_DISK_CAPACITY_DATA; + +typedef struct { + UINT8 LastLba7; + UINT8 LastLba6; + UINT8 LastLba5; + UINT8 LastLba4; + UINT8 LastLba3; + UINT8 LastLba2; + UINT8 LastLba1; + UINT8 LastLba0; + UINT8 BlockSize3; + UINT8 BlockSize2; + UINT8 BlockSize1; + UINT8 BlockSize0; + UINT8 Protection; + UINT8 LogicPerPhysical; + UINT8 LowestAlignLogic2; + UINT8 LowestAlignLogic1; + UINT8 Reserved[16]; +} EFI_SCSI_DISK_CAPACITY_DATA16; + +typedef struct { + UINT16 DataLen; + UINT16 BlkDespDataLen; + UINT8 Reserved[4]; +} EFI_SCSI_DISK_UNMAP_PARAM_LIST_HEADER; + +typedef struct { + UINT64 Lba; + UINT32 BlockNum; + UINT8 Reserved[4]; +} EFI_SCSI_DISK_UNMAP_BLOCK_DESP; + + +#pragma pack() + +// +// Sense Key +// +#define EFI_SCSI_SK_NO_SENSE (0x0) +#define EFI_SCSI_SK_RECOVERY_ERROR (0x1) +#define EFI_SCSI_SK_NOT_READY (0x2) +#define EFI_SCSI_SK_MEDIUM_ERROR (0x3) +#define EFI_SCSI_SK_HARDWARE_ERROR (0x4) +#define EFI_SCSI_SK_ILLEGAL_REQUEST (0x5) +#define EFI_SCSI_SK_UNIT_ATTENTION (0x6) +#define EFI_SCSI_SK_DATA_PROTECT (0x7) +#define EFI_SCSI_SK_BLANK_CHECK (0x8) +#define EFI_SCSI_SK_VENDOR_SPECIFIC (0x9) +#define EFI_SCSI_SK_RESERVED_A (0xA) +#define EFI_SCSI_SK_ABORT (0xB) +#define EFI_SCSI_SK_RESERVED_C (0xC) +#define EFI_SCSI_SK_OVERFLOW (0xD) +#define EFI_SCSI_SK_MISCOMPARE (0xE) +#define EFI_SCSI_SK_RESERVED_F (0xF) + +// +// Additional Sense Codes and Sense Code Qualifiers. +// Only some frequently used additional sense codes and qualifiers are +// defined here. Please refer to SCSI standard for full value definition. +// +#define EFI_SCSI_ASC_NOT_READY (0x04) +#define EFI_SCSI_ASCQ_IN_PROGRESS (0x01) + +#define EFI_SCSI_ASC_MEDIA_ERR1 (0x10) +#define EFI_SCSI_ASC_MEDIA_ERR2 (0x11) +#define EFI_SCSI_ASC_MEDIA_ERR3 (0x14) +#define EFI_SCSI_ASC_MEDIA_ERR4 (0x30) +#define EFI_SCSI_ASC_MEDIA_UPSIDE_DOWN (0x06) +#define EFI_SCSI_ASC_INVALID_CMD (0x20) +#define EFI_SCSI_ASC_LBA_OUT_OF_RANGE (0x21) +#define EFI_SCSI_ASC_INVALID_FIELD (0x24) +#define EFI_SCSI_ASC_WRITE_PROTECTED (0x27) +#define EFI_SCSI_ASC_MEDIA_CHANGE (0x28) +#define EFI_SCSI_ASC_RESET (0x29) ///< Power On Reset or Bus Reset occurred +#define EFI_SCSI_ASC_ILLEGAL_FIELD (0x26) +#define EFI_SCSI_ASC_NO_MEDIA (0x3A) +#define EFI_SCSI_ASC_ILLEGAL_MODE_FOR_THIS_TRACK (0x64) + +#endif |