diff options
Diffstat (limited to 'bsdinstall/scripts')
26 files changed, 0 insertions, 4974 deletions
diff --git a/bsdinstall/scripts/Makefile b/bsdinstall/scripts/Makefile deleted file mode 100644 index 147f49609921..000000000000 --- a/bsdinstall/scripts/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# $FreeBSD$ - -SCRIPTS= auto adduser bootconfig checksum config docsinstall entropy \ - fetchmissingdists hardening hostname jail keymap mirrorselect mount \ - netconfig netconfig_ipv4 netconfig_ipv6 rootpass script services time \ - umount wlanconfig zfsboot -BINDIR= ${LIBEXECDIR}/bsdinstall - -MAN= - -.include <bsd.prog.mk> diff --git a/bsdinstall/scripts/Makefile.depend b/bsdinstall/scripts/Makefile.depend deleted file mode 100644 index f80275d86ab1..000000000000 --- a/bsdinstall/scripts/Makefile.depend +++ /dev/null @@ -1,11 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - - -.include <dirdeps.mk> - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif diff --git a/bsdinstall/scripts/adduser b/bsdinstall/scripts/adduser deleted file mode 100755 index 456f76b04319..000000000000 --- a/bsdinstall/scripts/adduser +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -clear -echo "FreeBSD Installer" -echo "========================" -echo "Add Users" -echo -chroot $BSDINSTALL_CHROOT adduser 2>&1 diff --git a/bsdinstall/scripts/auto b/bsdinstall/scripts/auto deleted file mode 100755 index 9f8946880f61..000000000000 --- a/bsdinstall/scripts/auto +++ /dev/null @@ -1,444 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2013-2018 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_include $BSDCFG_SHARE/dialog.subr - -############################################################ GLOBALS - -# -# Strings that should be moved to an i18n file and loaded with f_include_lang() -# -hline_arrows_tab_enter="Press arrows, TAB or ENTER" -hline_arrows_tab_space_enter="Press arrows, TAB, SPACE or ENTER" -msg_abort="Abort" -msg_an_installation_step_has_been_aborted="An installation step has been aborted. Would you like\nto restart the installation or exit the installer?" -msg_auto_ufs="Auto (UFS)" -msg_auto_ufs_desc="Guided UFS Disk Setup" -msg_auto_ufs_help="Menu options help choose which disk to setup using UFS and standard partitions" -msg_auto_zfs="Auto (ZFS)" -msg_auto_zfs_desc="Guided Root-on-ZFS" -msg_auto_zfs_help="To use ZFS with less than 8GB RAM, see https://wiki.freebsd.org/ZFSTuningGuide" -msg_exit="Exit" -msg_freebsd_installer="FreeBSD Installer" -msg_gpt_active_fix="Your hardware is known to have issues booting in CSM/Legacy/BIOS mode from GPT partitions that are not set active. Would you like the installer to apply this workaround for you?" -msg_lenovo_fix="Your model of Lenovo is known to have a BIOS bug that prevents it booting from GPT partitions without UEFI. Would you like the installer to apply a workaround for you?" -msg_manual="Manual" -msg_manual_desc="Manual Disk Setup (experts)" -msg_manual_help="Create customized partitions from menu options" -msg_no="NO" -msg_restart="Restart" -msg_shell="Shell" -msg_shell_desc="Open a shell and partition by hand" -msg_shell_help="Create customized partitions using command-line utilities" -msg_yes="YES" - -############################################################ FUNCTIONS - -# error [$msg] -# -# Display generic error message when a script fails. An optional message -# argument can preceed the generic message. User is given the choice of -# restarting the installer or exiting. -# -error() -{ - local title="$msg_abort" - local btitle="$msg_freebsd_installer" - local prompt="${1:+$1\n\n}$msg_an_installation_step_has_been_aborted" - local hline="$hline_arrows_tab_space_enter" - - [ -f "$PATH_FSTAB" ] && bsdinstall umount - - local height width - f_dialog_buttonbox_size height width \ - "$title" "$btitle" "$prompt" "$hline" - - if $DIALOG \ - --title "$title" \ - --backtitle "$btitle" \ - --hline "$hline" \ - --no-label "$msg_exit" \ - --yes-label "$msg_restart" \ - --yesno "$prompt" $height $width - then - exec $0 - # NOTREACHED - fi - exit 1 -} - -# dialog_workaround -# -# Ask the user if they wish to apply a workaround -# -dialog_workaround() -{ - local passed_msg="$1" - local title="$DIALOG_TITLE" - local btitle="$DIALOG_BACKTITLE" - local prompt # Calculated below - local hline="$hline_arrows_tab_enter" - - local height=8 width=50 prefix=" " - local plen=${#prefix} list= line= - local max_width=$(( $width - 3 - $plen )) - - local yes no defaultno extra_args format - if [ "$USE_XDIALOG" ]; then - yes=ok no=cancel defaultno=default-no - extra_args="--wrap --left" - format="$passed_msg" - else - yes=yes no=no defaultno=defaultno - extra_args="--cr-wrap" - format="$passed_msg" - fi - - # Add height for Xdialog(1) - [ "$USE_XDIALOG" ] && height=$(( $height + $height / 5 + 3 )) - - prompt=$( printf "$format" ) - f_dprintf "%s: Workaround prompt" "$0" - $DIALOG \ - --title "$title" \ - --backtitle "$btitle" \ - --hline "$hline" \ - --$yes-label "$msg_yes" \ - --$no-label "$msg_no" \ - $extra_args \ - --yesno "$prompt" $height $width -} - -############################################################ MAIN - -f_dprintf "Began Installation at %s" "$( date )" - -rm -rf $BSDINSTALL_TMPETC -mkdir $BSDINSTALL_TMPETC - -trap true SIGINT # This section is optional -bsdinstall keymap - -trap error SIGINT # Catch cntrl-C here -bsdinstall hostname || error "Set hostname failed" - -export DISTRIBUTIONS="base.txz kernel.txz" -if [ -f $BSDINSTALL_DISTDIR/MANIFEST ]; then - DISTMENU=`awk -F'\t' '!/^(kernel\.txz|base\.txz)/{print $1,$5,$6}' $BSDINSTALL_DISTDIR/MANIFEST` - DISTMENU="$(echo ${DISTMENU} | sed -E 's/\.txz//g')" - - if [ -n "$DISTMENU" ]; then - exec 3>&1 - EXTRA_DISTS=$( eval dialog \ - --backtitle \"FreeBSD Installer\" \ - --title \"Distribution Select\" --nocancel --separate-output \ - --checklist \"Choose optional system components to install:\" \ - 0 0 0 $DISTMENU \ - 2>&1 1>&3 ) - for dist in $EXTRA_DISTS; do - export DISTRIBUTIONS="$DISTRIBUTIONS $dist.txz" - done - fi -fi - -FETCH_DISTRIBUTIONS="" -for dist in $DISTRIBUTIONS; do - if [ ! -f $BSDINSTALL_DISTDIR/$dist ]; then - FETCH_DISTRIBUTIONS="$FETCH_DISTRIBUTIONS $dist" - fi -done - -if [ -n "$FETCH_DISTRIBUTIONS" -a -n "$BSDINSTALL_CONFIGCURRENT" ]; then - dialog --backtitle "FreeBSD Installer" --title "Network Installation" --msgbox "Some installation files were not found on the boot volume. The next few screens will allow you to configure networking so that they can be downloaded from the Internet." 0 0 - bsdinstall netconfig || error - NETCONFIG_DONE=yes -fi - -rm -f $PATH_FSTAB -touch $PATH_FSTAB - -# -# Try to detect known broken platforms and apply their workarounds -# - -if f_interactive; then - sys_maker=$( kenv -q smbios.system.maker ) - f_dprintf "smbios.system.maker=[%s]" "$sys_maker" - sys_model=$( kenv -q smbios.system.product ) - f_dprintf "smbios.system.product=[%s]" "$sys_model" - sys_version=$( kenv -q smbios.system.version ) - f_dprintf "smbios.system.version=[%s]" "$sys_version" - sys_mb_maker=$( kenv -q smbios.planar.maker ) - f_dprintf "smbios.planar.maker=[%s]" "$sys_mb_maker" - sys_mb_product=$( kenv -q smbios.planar.product ) - f_dprintf "smbios.planar.product=[%s]" "$sys_mb_product" - - # - # Laptop Models - # - case "$sys_maker" in - "LENOVO") - case "$sys_version" in - "ThinkPad X220"|"ThinkPad T420"|"ThinkPad T520"|"ThinkPad W520"|"ThinkPad X1") - dialog_workaround "$msg_lenovo_fix" - retval=$? - f_dprintf "lenovofix_prompt=[%s]" "$retval" - if [ $retval -eq $DIALOG_OK ]; then - export ZFSBOOT_PARTITION_SCHEME="GPT + Lenovo Fix" - export WORKAROUND_LENOVO=1 - fi - ;; - esac - ;; - "Dell Inc.") - case "$sys_model" in - "Latitude E6330"|"Latitude E7440"|"Latitude E7240"|"Precision Tower 5810") - dialog_workaround "$msg_gpt_active_fix" - retval=$? - f_dprintf "gpt_active_fix_prompt=[%s]" "$retval" - if [ $retval -eq $DIALOG_OK ]; then - export ZFSBOOT_PARTITION_SCHEME="GPT + Active" - export WORKAROUND_GPTACTIVE=1 - fi - ;; - esac - ;; - "Hewlett-Packard") - case "$sys_model" in - "HP ProBook 4330s") - dialog_workaround "$msg_gpt_active_fix" - retval=$? - f_dprintf "gpt_active_fix_prompt=[%s]" "$retval" - if [ $retval -eq $DIALOG_OK ]; then - export ZFSBOOT_PARTITION_SCHEME="GPT + Active" - export WORKAROUND_GPTACTIVE=1 - fi - ;; - esac - ;; - esac - # - # Motherboard Models - # - case "$sys_mb_maker" in - "Intel Corporation") - case "$sys_mb_product" in - "DP965LT"|"D510MO") - dialog_workaround "$msg_gpt_active_fix" - retval=$? - f_dprintf "gpt_active_fix_prompt=[%s]" "$retval" - if [ $retval -eq $DIALOG_OK ]; then - export ZFSBOOT_PARTITION_SCHEME="GPT + Active" - export WORKAROUND_GPTACTIVE=1 - fi - ;; - esac - ;; - "Acer") - case "$sys_mb_product" in - "Veriton M6630G") - dialog_workaround "$msg_gpt_active_fix" - retval=$? - f_dprintf "gpt_active_fix_prompt=[%s]" "$retval" - if [ $retval -eq $DIALOG_OK ]; then - export ZFSBOOT_PARTITION_SCHEME="GPT + Active" - export WORKAROUND_GPTACTIVE=1 - fi - ;; - esac - ;; - esac -fi - -PMODES=" - '$msg_auto_ufs' '$msg_auto_ufs_desc' '$msg_auto_ufs_help' - '$msg_manual' '$msg_manual_desc' '$msg_manual_help' - '$msg_shell' '$msg_shell_desc' '$msg_shell_help' -" # END-QUOTE - -CURARCH=$( uname -m ) -case $CURARCH in - amd64|arm64|i386|riscv) # Booting ZFS Supported - PMODES=" - '$msg_auto_zfs' '$msg_auto_zfs_desc' '$msg_auto_zfs_help' - $PMODES - " # END-QUOTE - ;; - *) # Booting ZFS Unsupported - ;; -esac - -exec 3>&1 -PARTMODE=`echo $PMODES | xargs dialog --backtitle "FreeBSD Installer" \ - --title "Partitioning" \ - --item-help \ - --menu "How would you like to partition your disk?" \ - 0 0 0 2>&1 1>&3` || exit 1 -exec 3>&- - -case "$PARTMODE" in -"$msg_auto_zfs") # ZFS - bsdinstall zfsboot || error "ZFS setup failed" - bsdinstall mount || error "Failed to mount filesystem" - ;; -"$msg_auto_ufs") # Guided UFS - bsdinstall autopart || error "Partitioning error" - bsdinstall mount || error "Failed to mount filesystem" - ;; -"$msg_shell") # Shell - clear - echo "Use this shell to set up partitions for the new system. When finished, mount the system at $BSDINSTALL_CHROOT and place an fstab file for the new system at $PATH_FSTAB. Then type 'exit'. You can also enter the partition editor at any time by entering 'bsdinstall partedit'." - sh 2>&1 - ;; -"$msg_manual") # Manual - if f_isset debugFile; then - # Give partedit the path to our logfile so it can append - BSDINSTALL_LOG="${debugFile#+}" bsdinstall partedit || error "Partitioning error" - else - bsdinstall partedit || error "Partitioning error" - fi - bsdinstall mount || error "Failed to mount filesystem" - ;; -*) - error "Unknown partitioning mode" - ;; -esac - -if [ -n "$FETCH_DISTRIBUTIONS" ]; then - exec 3>&1 - export BSDINSTALL_DISTDIR=$(`dirname $0`/fetchmissingdists 2>&1 1>&3) - FETCH_RESULT=$? - exec 3>&- - - [ $FETCH_RESULT -ne 0 ] && error "Could not fetch remote distributions" -fi -bsdinstall checksum || error "Distribution checksum failed" -bsdinstall distextract || error "Distribution extract failed" - -# Set up boot loader -bsdinstall bootconfig || error "Failed to configure bootloader" - -bsdinstall rootpass || error "Could not set root password" - -trap true SIGINT # This section is optional -if [ "$NETCONFIG_DONE" != yes ]; then - bsdinstall netconfig # Don't check for errors -- the user may cancel -fi -bsdinstall time -bsdinstall services -bsdinstall hardening - -dialog --backtitle "FreeBSD Installer" --title "Add User Accounts" --yesno \ - "Would you like to add users to the installed system now?" 0 0 && \ - bsdinstall adduser - -finalconfig() { - exec 3>&1 - REVISIT=$(dialog --backtitle "FreeBSD Installer" \ - --title "Final Configuration" --no-cancel --menu \ - "Setup of your FreeBSD system is nearly complete. You can now modify your configuration choices. After this screen, you will have an opportunity to make more complex changes using a shell." 0 0 0 \ - "Exit" "Apply configuration and exit installer" \ - "Add User" "Add a user to the system" \ - "Root Password" "Change root password" \ - "Hostname" "Set system hostname" \ - "Network" "Networking configuration" \ - "Services" "Set daemons to run on startup" \ - "System Hardening" "Set security options" \ - "Time Zone" "Set system timezone" \ - "Handbook" "Install FreeBSD Handbook (requires network)" 2>&1 1>&3) - exec 3>&- - - case "$REVISIT" in - "Add User") - bsdinstall adduser - finalconfig - ;; - "Root Password") - bsdinstall rootpass - finalconfig - ;; - "Hostname") - bsdinstall hostname - finalconfig - ;; - "Network") - bsdinstall netconfig - finalconfig - ;; - "Services") - bsdinstall services - finalconfig - ;; - "System Hardening") - bsdinstall hardening - finalconfig - ;; - "Time Zone") - bsdinstall time - finalconfig - ;; - "Handbook") - bsdinstall docsinstall - finalconfig - ;; - esac -} - -# Allow user to change his mind -finalconfig - -trap error SIGINT # SIGINT is bad again -bsdinstall config || error "Failed to save config" - -if [ ! -z "$BSDINSTALL_FETCHDEST" ]; then - rm -rf "$BSDINSTALL_FETCHDEST" -fi - -dialog --backtitle "FreeBSD Installer" --title "Manual Configuration" \ - --default-button no --yesno \ - "The installation is now finished. Before exiting the installer, would you like to open a shell in the new system to make any final manual modifications?" 0 0 -if [ $? -eq 0 ]; then - clear - echo This shell is operating in a chroot in the new system. \ - When finished making configuration changes, type \"exit\". - chroot "$BSDINSTALL_CHROOT" /bin/sh 2>&1 -fi - -bsdinstall entropy -bsdinstall umount - -f_dprintf "Installation Completed at %s" "$( date )" - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/bootconfig b/bsdinstall/scripts/bootconfig deleted file mode 100755 index c5218b10a271..000000000000 --- a/bsdinstall/scripts/bootconfig +++ /dev/null @@ -1,97 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2018 Rebecca Cran -# Copyright (c) 2017 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - - -FREEBSD_BOOTLABEL="FreeBSD" - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 - -: ${TMPDIR:="/tmp"} - -die() { - echo $* - exit 1 -} - -if [ `uname -m` == powerpc ]; then - platform=`sysctl -n hw.platform` - if [ "$platform" == ps3 -o "$platform" == powernv ]; then - rootpart=$(awk '{ if($2 == "/") printf("%s:%s\n", $3, $1); }' $PATH_FSTAB) - kboot_conf=$BSDINSTALL_CHROOT/boot/etc/kboot.conf - mkdir -p $BSDINSTALL_CHROOT/boot/etc/ - echo default=$FREEBSD_BOOTLABEL > $kboot_conf - echo $FREEBSD_BOOTLABEL=\'/kernel/kernel kernelname=/boot/kernel/kernel vfs.root.mountfrom=${rootpart}\' >> $kboot_conf - fi -fi - -# Update the ESP (EFI System Partition) with the new bootloader if we have an ESP -if [ -n "$(awk '{if ($2=="/boot/efi") printf("%s\n",$1);}' $PATH_FSTAB)" ]; then - case $(uname -m) in - arm64) ARCHBOOTNAME=aa64 ;; - amd64) ARCHBOOTNAME=x64 ;; - riscv) ARCHBOOTNAME=riscv64 ;; - # arm) ARCHBOOTNAME=arm ;; # No other support for arm install - # i386) ARCHBOOTNAME=ia32 ;; # no support for this in i386 kernels, rare machines - *) die "Unsupported arch $(uname -m) for UEFI install" - esac - BOOTDIR="/efi/boot" - BOOTNAME="${BOOTDIR}/boot${ARCHBOOTNAME}.efi" - FREEBSD_BOOTDIR="/efi/freebsd" - FREEBSD_BOOTNAME="${FREEBSD_BOOTDIR}/loader.efi" - mntpt="$BSDINSTALL_CHROOT/boot/efi" - - f_dprintf "Installing loader.efi onto ESP" - mkdir -p "${mntpt}/${FREEBSD_BOOTDIR}" "${mntpt}/${BOOTDIR}" - cp "$BSDINSTALL_CHROOT/boot/loader.efi" "${mntpt}/${FREEBSD_BOOTNAME}" - - # - # The following shouldn't be necessary. UEFI defines a way to - # specifically select what to boot (which we do via - # efibootmgr). However, virtual environments often times lack - # support for the NV variables efibootmgr sets. In addition, - # some UEFI implementations have features that interfere with - # the setting of these variables. To combat that, we install the - # default removable media boot file as a fallback if it doesn't - # exist. We don't install it all the time since that can - # interfere with other installations on the drive (like rEFInd). - # - if [ ! -f "${mntpt}/${BOOTNAME}" ]; then - cp "$BSDINSTALL_CHROOT/boot/loader.efi" "${mntpt}/${BOOTNAME}" - fi - - if [ "$BSDINSTALL_CONFIGCURRENT" ]; then - f_dprintf "Creating UEFI boot entry" - efibootmgr --create --activate --label "$FREEBSD_BOOTLABEL" --loader "${mntpt}/${FREEBSD_BOOTNAME}" > /dev/null - fi - - f_dprintf "Finished configuring ESP" -fi - -# Add boot0cfg for MBR BIOS booting? diff --git a/bsdinstall/scripts/checksum b/bsdinstall/scripts/checksum deleted file mode 100755 index ff404d7f587b..000000000000 --- a/bsdinstall/scripts/checksum +++ /dev/null @@ -1,79 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -test -f $BSDINSTALL_DISTDIR/MANIFEST || exit 0 - -percentage=0 -for dist in $DISTRIBUTIONS; do - distname=$(basename $dist .txz) - eval "status_$distname=7" - - items="" - for i in $DISTRIBUTIONS; do - items="$items $i `eval echo \\\${status_$(basename $i .txz):-Pending}`" - done - dialog --backtitle "FreeBSD Installer" --title "Checksum Verification" \ - --mixedgauge "Verifying checksums of selected distributions." \ - 0 0 $percentage $items - - CK=`sha256 -q $BSDINSTALL_DISTDIR/$dist` - awk -v checksum=$CK -v dist=$dist -v found=0 '{ - if (dist == $1) { - found = 1 - if (checksum == $2) - exit(0) - else - exit(2) - } - } END {if (!found) exit(1);}' $BSDINSTALL_DISTDIR/MANIFEST - - CK_VALID=$? - if [ $CK_VALID -le 1 ]; then - if [ $CK_VALID -eq 0 ]; then - eval "status_$distname=2" - else - eval "status_$distname=6" - fi - percentage=$(echo $percentage + 100/`echo $DISTRIBUTIONS | wc -w` | bc) - else - eval "status_$distname=1" - case $(/bin/freebsd-version -u) in - *-ALPHA*|*-CURRENT|*-STABLE|*-PRERELEASE) - dialog --backtitle "FreeBSD Installer" --title "Error" \ - --msgbox "The checksum for $dist does not match. It may have become corrupted, or it may be from a newer version of FreeBSD. Please check for a newer snapshot." 0 0 - ;; - *) - dialog --backtitle "FreeBSD Installer" --title "Error" \ - --msgbox "The checksum for $dist does not match. It may have become corrupted, and should be redownloaded." 0 0 - ;; - esac - exit 1 - fi -done - -exit 0 diff --git a/bsdinstall/scripts/config b/bsdinstall/scripts/config deleted file mode 100755 index a909c3faee63..000000000000 --- a/bsdinstall/scripts/config +++ /dev/null @@ -1,63 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2013-2015 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ MAIN - -cat $BSDINSTALL_TMPETC/rc.conf.* >> $BSDINSTALL_TMPETC/rc.conf -rm $BSDINSTALL_TMPETC/rc.conf.* - -cat $BSDINSTALL_CHROOT/etc/sysctl.conf $BSDINSTALL_TMPETC/sysctl.conf.* >> $BSDINSTALL_TMPETC/sysctl.conf -rm $BSDINSTALL_TMPETC/sysctl.conf.* - -if [ -f $BSDINSTALL_TMPETC/ttys.hardening ]; then - cat $BSDINSTALL_TMPETC/ttys.hardening > $BSDINSTALL_TMPETC/ttys - rm $BSDINSTALL_TMPETC/ttys.hardening -fi - -cp $BSDINSTALL_TMPETC/* $BSDINSTALL_CHROOT/etc - -cat $BSDINSTALL_TMPBOOT/loader.conf.* >> $BSDINSTALL_TMPBOOT/loader.conf -rm $BSDINSTALL_TMPBOOT/loader.conf.* -# The 'cryptodev_load' line is a workaround for arm64, which does not -# automatically load cryptodev.ko with zfs.ko. -df -t zfs $BSDINSTALL_CHROOT > /dev/null && echo "cryptodev_load=\"YES\"" >> $BSDINSTALL_TMPBOOT/loader.conf -df -t zfs $BSDINSTALL_CHROOT > /dev/null && echo "zfs_load=\"YES\"" >> $BSDINSTALL_TMPBOOT/loader.conf - -cp $BSDINSTALL_TMPBOOT/* $BSDINSTALL_CHROOT/boot - -[ "${debugFile#+}" ] && cp "${debugFile#+}" $BSDINSTALL_CHROOT/var/log/ - -# Set up other things from installed config -chroot $BSDINSTALL_CHROOT /usr/bin/newaliases > /dev/null 2>&1 - -exit 0 - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/docsinstall b/bsdinstall/scripts/docsinstall deleted file mode 100755 index ea6fcf49b029..000000000000 --- a/bsdinstall/scripts/docsinstall +++ /dev/null @@ -1,167 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Marc Fonvieille -# Copyright (c) 2013-2015 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_dprintf "%s: loading includes..." "$0" -f_include $BSDCFG_SHARE/dialog.subr -f_include $BSDCFG_SHARE/mustberoot.subr -f_include $BSDCFG_SHARE/packages/packages.subr - -############################################################ CONFIGURATION - -# -# List of languages to display (descriptions pulled from $msg_{lang}doc_desc) -# -: ${DOCSINSTALL_LANGS:=\ - bn da de el en es fr hu it ja ko mn nl pl pt ru tr zh_cn zh_tw \ -} - -############################################################ GLOBALS - -# -# Strings that should be moved to an i18n file and loaded with f_include_lang() -# -hline_arrows_space_tab_enter="Use arrows, SPACE, TAB or ENTER" -msg_bndoc_desc="Bengali Documentation" -msg_cancel="Cancel" -msg_dadoc_desc="Danish Documentation" -msg_dedoc_desc="German Documentation" -msg_docsinstall_menu_text="This menu allows you to install the whole documentation set from\nthe FreeBSD Documentation Project: Handbook, FAQ, and articles.\n\nPlease select the language versions you wish to install. At\nminimum, you should install the English version, the original\nversion of the documentation." -msg_eldoc_desc="Greek Documentation" -msg_endoc_desc="English Documentation (recommended)" -msg_esdoc_desc="Spanish Documentation" -msg_frdoc_desc="French Documentation" -msg_freebsd_documentation_installation="FreeBSD Documentation Installation" -msg_freebsd_installer="FreeBSD Installer" -msg_hudoc_desc="Hungarian Documentation" -msg_itdoc_desc="Italian Documentation" -msg_jadoc_desc="Japanese Documentation" -msg_kodoc_desc="Korean Documentation" -msg_mndoc_desc="Mongolian Documentation" -msg_nldoc_desc="Dutch Documentation" -msg_ok="OK" -msg_pldoc_desc="Polish Documentation" -msg_ptdoc_desc="Portuguese Documentation" -msg_rudoc_desc="Russian Documentation" -msg_trdoc_desc="Turkish Documentation" -msg_zh_cndoc_desc="Simplified Chinese Documentation" -msg_zh_twdoc_desc="Traditional Chinese Documentation" - -############################################################ FUNCTIONS - -# dialog_menu_main -# -# Display the dialog(1)-based application main menu. -# -dialog_menu_main() -{ - local title="$DIALOG_TITLE" - local btitle="$DIALOG_BACKTITLE" - local prompt="$msg_docsinstall_menu_text" - local check_list= # Calculated below - local hline="$hline_arrows_space_tab_enter" - - local lang desc upper status - for lang in $DOCSINSTALL_LANGS; do - # Fetch the i18n description to display - f_getvar msg_${lang}doc_desc desc - f_shell_escape "$desc" desc - - # Get default status for each language - upper=$( echo "$lang" | awk '{print toupper($0)}' ) - case "$lang" in - en) f_getvar DIST_DOC_$upper:-on status ;; - *) f_getvar DIST_DOC_$upper:-off status - esac - - check_list="$check_list - '$lang' '$desc' '$status' - " # END-QUOTE - done - - local height width rows - eval f_dialog_checklist_size height width rows \ - \"\$title\" \ - \"\$btitle\" \ - \"\$prompt\" \ - \"\$hline\" \ - $check_list - local selected - #selected=$( eval $DIALOG \ - selected=$( eval ../../bsddialog \ - --title \"\$title\" \ - --backtitle \"\$btitle\" \ - --separate-output \ - --hline \"\$hline\" \ - --ok-label \"\$msg_ok\" \ - --cancel-label \"\$msg_cancel\" \ - --checklist \"\$prompt\" \ - $height $width $rows \ - $check_list \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) - local retval=$? - f_dialog_menutag_store -s "$selected" - return $retval -} - -############################################################ MAIN - -# -# Initialize -# -f_dialog_title "$msg_freebsd_documentation_installation" -f_dialog_backtitle "$msg_freebsd_installer" -f_mustberoot_init - -# -# Launch application main menu -# -dialog_menu_main || f_die -f_dialog_menutag_fetch selected - -# Let pkg_add be able to use name servers -f_quietly cp -f $BSDINSTALL_TMPETC/resolv.conf $BSDINSTALL_CHROOT/etc/ - -# -# Install each of the selected packages -# -docsets="" -for lang in $selected; do - docsets="$docsets $lang-freebsd-doc" -done - -ASSUME_ALWAYS_YES=YES chroot $BSDINSTALL_CHROOT pkg install $docsets - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/entropy b/bsdinstall/scripts/entropy deleted file mode 100755 index d3938f12cb33..000000000000 --- a/bsdinstall/scripts/entropy +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2013 Dag-Erling Smørgrav -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -umask 077 -for i in /entropy /boot/entropy; do - i="$BSDINSTALL_CHROOT/$i" - dd if=/dev/random of="$i" bs=4096 count=1 - chown 0:0 "$i" -done diff --git a/bsdinstall/scripts/fetchmissingdists b/bsdinstall/scripts/fetchmissingdists deleted file mode 100644 index 768217e2fb8c..000000000000 --- a/bsdinstall/scripts/fetchmissingdists +++ /dev/null @@ -1,132 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2013-2018 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# - -error() -{ - dialog --backtitle "FreeBSD Installer" --title "Error" --msgbox $1 0 0 - exit 1 -} - -FETCH_DISTRIBUTIONS="" -LOCAL_DISTRIBUTIONS="" -for dist in $DISTRIBUTIONS; do - if [ ! -f $BSDINSTALL_DISTDIR/$dist ]; then - FETCH_DISTRIBUTIONS="$FETCH_DISTRIBUTIONS $dist" - else - LOCAL_DISTRIBUTIONS="$LOCAL_DISTRIBUTIONS $dist" - fi -done -LOCAL_DISTRIBUTIONS=`echo $LOCAL_DISTRIBUTIONS` # Trim white space -FETCH_DISTRIBUTIONS=`echo $FETCH_DISTRIBUTIONS` # Trim white space - -if [ -z "$FETCH_DISTRIBUTIONS" ]; then - echo $BSDINSTALL_DISTDIR >&2 - exit 0 -fi - -ALL_DISTRIBUTIONS="$DISTRIBUTIONS" -WANT_DEBUG= - -# Download to a directory in the new system as scratch space -BSDINSTALL_FETCHDEST="$BSDINSTALL_CHROOT/usr/freebsd-dist" -mkdir -p "$BSDINSTALL_FETCHDEST" || error "Could not create directory $BSDINSTALL_FETCHDEST" - -if [ -z "$BSDINSTALL_DISTSITE" ]; then - exec 3>&1 - BSDINSTALL_DISTSITE=$(`dirname $0`/mirrorselect 2>&1 1>&3) - MIRROR_BUTTON=$? - exec 3>&- - test $MIRROR_BUTTON -eq 0 || error "No mirror selected" - export BSDINSTALL_DISTSITE -fi - -BSDINSTALL_DISTDIR_ORIG="$BSDINSTALL_DISTDIR" -export BSDINSTALL_DISTDIR="$BSDINSTALL_FETCHDEST" -export FTP_PASSIVE_MODE=YES - -if [ -f "$BSDINSTALL_DISTDIR_ORIG/MANIFEST" ]; then - cp "$BSDINSTALL_DISTDIR_ORIG/MANIFEST" "$BSDINSTALL_DISTDIR/MANIFEST" - VERIFY_MANIFEST_SIG=0 -else - FETCH_DISTRIBUTIONS="MANIFEST $FETCH_DISTRIBUTIONS" - VERIFY_MANIFEST_SIG=1 - - # XXX actually verify signature on manifest - dialog --backtitle "FreeBSD Installer" --title "Warning" --msgbox "Manifest not found on local disk and will be fetched from an unverified source. This is a potential security risk. If you do not wish to proceed, press control-C now." 0 0 -fi - -if [ ! -z "$LOCAL_DISTRIBUTIONS" ]; then - # Copy local stuff first - env DISTRIBUTIONS="$LOCAL_DISTRIBUTIONS" \ - BSDINSTALL_DISTSITE="file://$BSDINSTALL_DISTDIR" \ - bsdinstall distfetch || \ - error "Failed to fetch distribution from local media" -fi - -export DISTRIBUTIONS="$FETCH_DISTRIBUTIONS" - -# Iterate through the distribution list and set a flag if debugging -# distributions have been selected. -for _DISTRIBUTION in $DISTRIBUTIONS; do - case $_DISTRIBUTION in - *-dbg.*) - [ -e $BSDINSTALL_DISTDIR/$_DISTRIBUTION ] \ - && continue - WANT_DEBUG=1 - DEBUG_LIST="\n$DEBUG_LIST\n$_DISTRIBUTION" - ;; - *) - ;; - esac -done - -# Fetch the distributions. -bsdinstall distfetch -rc=$? - -if [ $rc -ne 0 ]; then - # If unable to fetch the remote distributions, recommend - # deselecting the debugging distributions, and retrying the - # installation, since failure to fetch *-dbg.txz should not - # be considered a fatal installation error. - msg="Failed to fetch remote distribution" - if [ ! -z "$WANT_DEBUG" ]; then - # Trim leading and trailing newlines. - DEBUG_LIST="${DEBUG_LIST%%\n}" - DEBUG_LIST="${DEBUG_LIST##\n}" - msg="$msg\n\nPlease deselect the following distributions" - msg="$msg and retry the installation:" - msg="$msg\n$DEBUG_LIST" - fi - error "$msg" -fi - -echo $BSDINSTALL_DISTDIR >&2 - diff --git a/bsdinstall/scripts/hardening b/bsdinstall/scripts/hardening deleted file mode 100755 index 952b56180ee2..000000000000 --- a/bsdinstall/scripts/hardening +++ /dev/null @@ -1,91 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2016 Bartek Rutkowski -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -: ${DIALOG_OK=0} - -echo -n > $BSDINSTALL_TMPETC/rc.conf.hardening -echo -n > $BSDINSTALL_TMPETC/sysctl.conf.hardening -echo -n > $BSDINSTALL_TMPBOOT/loader.conf.hardening - -exec 3>&1 -FEATURES=$( ../../bsddialog --backtitle "FreeBSD Installer" \ - --title "System Hardening" --nocancel --separate-output \ - --checklist "Choose system security hardening options:" \ - 0 0 0 \ - "0 hide_uids" "Hide processes running as other users" ${hide_uids:-off} \ - "1 hide_gids" "Hide processes running as other groups" ${hide_gids:-off} \ - "2 hide_jail" "Hide processes running in jails" ${hide_jail:-off} \ - "3 read_msgbuf" "Disable reading kernel message buffer for unprivileged users" ${read_msgbuf:-off} \ - "4 proc_debug" "Disable process debugging facilities for unprivileged users" ${proc_debug:-off} \ - "5 random_pid" "Randomize the PID of newly created processes" ${random_pid:-off} \ - "6 clear_tmp" "Clean the /tmp filesystem on system startup" ${clear_tmp:-off} \ - "7 disable_syslogd" "Disable opening Syslogd network socket (disables remote logging)" ${disable_syslogd:-off} \ - "8 disable_sendmail" "Disable Sendmail service" ${disable_sendmail:-off} \ - "9 secure_console" "Enable console password prompt" ${secure_console:-off} \ - "10 disable_ddtrace" "Disallow DTrace destructive-mode" ${disable_ddtrace:-off} \ -2>&1 1>&3 ) -exec 3>&- - -for feature in $FEATURES; do - case "$feature" in - hide_uids) - echo security.bsd.see_other_uids=0 >> $BSDINSTALL_TMPETC/sysctl.conf.hardening - ;; - hide_gids) - echo security.bsd.see_other_gids=0 >> $BSDINSTALL_TMPETC/sysctl.conf.hardening - ;; - hide_jail) - echo security.bsd.see_jail_proc=0 >> $BSDINSTALL_TMPETC/sysctl.conf.hardening - ;; - read_msgbuf) - echo security.bsd.unprivileged_read_msgbuf=0 >> $BSDINSTALL_TMPETC/sysctl.conf.hardening - ;; - proc_debug) - echo security.bsd.unprivileged_proc_debug=0 >> $BSDINSTALL_TMPETC/sysctl.conf.hardening - ;; - random_pid) - echo kern.randompid=1 >> $BSDINSTALL_TMPETC/sysctl.conf.hardening - ;; - clear_tmp) - echo 'clear_tmp_enable="YES"' >> $BSDINSTALL_TMPETC/rc.conf.hardening - ;; - disable_syslogd) - echo 'syslogd_flags="-ss"' >> $BSDINSTALL_TMPETC/rc.conf.hardening - ;; - disable_sendmail) - echo 'sendmail_enable="NONE"' >> $BSDINSTALL_TMPETC/rc.conf.hardening - ;; - secure_console) - sed "s/unknown off secure/unknown off insecure/g" $BSDINSTALL_CHROOT/etc/ttys > $BSDINSTALL_TMPETC/ttys.hardening - ;; - disable_ddtrace) - echo 'security.bsd.allow_destructive_dtrace=0' >> $BSDINSTALL_TMPBOOT/loader.conf.hardening - ;; - esac -done - diff --git a/bsdinstall/scripts/hostname b/bsdinstall/scripts/hostname deleted file mode 100755 index 23620ab91571..000000000000 --- a/bsdinstall/scripts/hostname +++ /dev/null @@ -1,126 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2015-2018 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_dprintf "%s: loading_includes..." "$0" -f_include $BSDCFG_SHARE/dialog.subr - -############################################################ CONFIGURATION - -# -# Default value -# -: ${HOSTNAME=$( hostname )} - -# -# Default file to store hostname entry in -# -: ${HOSTNAMEFILE:=$BSDINSTALL_TMPETC/rc.conf.hostname} - -############################################################ GLOBALS - -# -# Strings that should be moved to an i18n file and loaded with f_include_lang() -# -msg_freebsd_installer="FreeBSD Installer" -msg_ok="OK" -msg_please_choose_a_hostname="Please choose a hostname for this machine.\n\nIf you are running on a managed network, please ask\nyour network administrator for an appropriate name." -msg_set_hostname="Set Hostname" - -# -# Command strings for various tasks -# -ECHO_OVERWRITE='echo "%s" > "%s"' -SET_HOSTNAME='hostname -s "%s"' - -############################################################ FUNCTIONS - -# dialog_hostname -# -# Display input box (without cancel button) for user to enter desired hostname. -# -dialog_hostname() -{ - local prompt="$msg_please_choose_a_hostname" - local hline= - local value="$*" - - local height width - f_dialog_inputbox_size height width \ - "$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$prompt" "$value" "$hline" - - #$DIALOG \ - ../../bsddialog \ - --title "$DIALOG_TITLE" \ - --backtitle "$DIALOG_BACKTITLE" \ - --hline "$hline" \ - --ok-label "$msg_ok" \ - --no-cancel \ - --inputbox "$prompt" \ - $height $width "$value" \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD -} - -############################################################ MAIN - -# -# Initialize -# -f_dialog_title "$msg_set_hostname" -f_dialog_backtitle "$msg_freebsd_installer" - -# -# Get user input -# -HOSTNAME=$( dialog_hostname "$HOSTNAME" ) -[ $? -eq $DIALOG_CANCEL ] && exit 1 - -# -# Store the user's choice -# -f_eval_catch "$pgm" echo "$ECHO_OVERWRITE" \ - 'hostname=\"$HOSTNAME\"' "$HOSTNAMEFILE" -retval=$? - -# -# Activate entry if configured -# -if [ "$BSDINSTALL_CONFIGCURRENT" ]; then - f_eval_catch "$pgm" hostname "$SET_HOSTNAME" "$HOSTNAME" - retval=$? -fi - -exit $retval - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/jail b/bsdinstall/scripts/jail deleted file mode 100755 index d3a84f872fb6..000000000000 --- a/bsdinstall/scripts/jail +++ /dev/null @@ -1,159 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2013-2015 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 - -############################################################ MAIN - -f_dprintf "Began Installation at %s" "$( date )" -export BSDINSTALL_CHROOT=$1 - -error() { - local msg - if [ -n "$1" ]; then - msg="$1\n\n" - fi - dialog --backtitle "FreeBSD Installer" --title "Abort" \ - --no-label "Exit" --yes-label "Restart" --yesno \ - "${msg}An installation step has been aborted. Would you like to restart the installation or exit the installer?" 0 0 - if [ $? -ne 0 ]; then - exit - else - exec $0 $BSDINSTALL_CHROOT - fi -} - -rm -rf $BSDINSTALL_TMPETC -mkdir $BSDINSTALL_TMPETC -mkdir -p $1 || error "mkdir failed for $1" - -if [ -n "$SCRIPT" ] -then - split -a 2 -p '^#!.*' "$SCRIPT" $TMPDIR/bsdinstall-installscript- - . $TMPDIR/bsdinstall-installscript-aa -fi - -test ! -d $BSDINSTALL_DISTDIR && mkdir -p $BSDINSTALL_DISTDIR - -if [ ! -f $BSDINSTALL_DISTDIR/MANIFEST -a -z "$BSDINSTALL_DISTSITE" ]; then - exec 3>&1 - BSDINSTALL_DISTSITE=$(`dirname $0`/mirrorselect 2>&1 1>&3) - MIRROR_BUTTON=$? - exec 3>&- - test $MIRROR_BUTTON -eq 0 || error "No mirror selected" - export BSDINSTALL_DISTSITE - fetch -o $BSDINSTALL_DISTDIR/MANIFEST $BSDINSTALL_DISTSITE/MANIFEST || error "Could not download $BSDINSTALL_DISTSITE/MANIFEST" -fi - -: ${DISTRIBUTIONS="base.txz"}; export DISTRIBUTIONS -if [ -f $BSDINSTALL_DISTDIR/MANIFEST ]; then - DISTMENU=`cut -f 4,5,6 $BSDINSTALL_DISTDIR/MANIFEST | grep -v -e ^kernel -e ^base` - - if [ ! "$nonInteractive" == "YES" ] - then - exec 3>&1 - EXTRA_DISTS=$(echo $DISTMENU | xargs dialog \ - --backtitle "FreeBSD Installer" \ - --title "Distribution Select" --nocancel --separate-output \ - --checklist "Choose optional system components to install:" \ - 0 0 0 \ - 2>&1 1>&3) - for dist in $EXTRA_DISTS; do - export DISTRIBUTIONS="$DISTRIBUTIONS $dist.txz" - done - fi -fi - -FETCH_DISTRIBUTIONS="" -for dist in $DISTRIBUTIONS; do - if [ ! -f $BSDINSTALL_DISTDIR/$dist ]; then - FETCH_DISTRIBUTIONS="$FETCH_DISTRIBUTIONS $dist" - fi -done -FETCH_DISTRIBUTIONS=`echo $FETCH_DISTRIBUTIONS` # Trim white space - -if [ -n "$FETCH_DISTRIBUTIONS" -a -z "$BSDINSTALL_DISTSITE" ]; then - exec 3>&1 - BSDINSTALL_DISTSITE=$(`dirname $0`/mirrorselect 2>&1 1>&3) - MIRROR_BUTTON=$? - exec 3>&- - test $MIRROR_BUTTON -eq 0 || error "No mirror selected" - export BSDINSTALL_DISTSITE -fi - -if [ ! -z "$FETCH_DISTRIBUTIONS" ]; then - bsdinstall distfetch || error "Failed to fetch distribution" -fi - -bsdinstall checksum || error "Distribution checksum failed" -bsdinstall distextract || error "Distribution extract failed" - -if [ ! "$nonInteractive" == "YES" ] -then - bsdinstall rootpass || error "Could not set root password" -fi - -trap true SIGINT # This section is optional - -if [ ! "$nonInteractive" == "YES" ] -then -bsdinstall services - - dialog --backtitle "FreeBSD Installer" --title "Add User Accounts" --yesno \ - "Would you like to add users to the installed system now?" 0 0 && \ - bsdinstall adduser -fi - -trap error SIGINT # SIGINT is bad again -bsdinstall config || error "Failed to save config" -cp /etc/resolv.conf $1/etc -cp /etc/localtime $1/etc -cp /var/db/zoneinfo $1/var/db - -# Run post-install script -if [ -f $TMPDIR/bsdinstall-installscript-ab ]; then - cp $TMPDIR/bsdinstall-installscript-ab $BSDINSTALL_CHROOT/tmp/installscript - chmod a+x $BSDINSTALL_CHROOT/tmp/installscript - mount -t devfs devfs "$BSDINSTALL_CHROOT/dev" - chroot $BSDINSTALL_CHROOT /tmp/installscript $@ 2>&1 - umount "$BSDINSTALL_CHROOT/dev" - rm $BSDINSTALL_CHROOT/tmp/installscript -fi - -bsdinstall entropy - -f_dprintf "Installation Completed at %s" "$(date)" -exit $SUCCESS - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/keymap b/bsdinstall/scripts/keymap deleted file mode 100755 index 739d0223c4f4..000000000000 --- a/bsdinstall/scripts/keymap +++ /dev/null @@ -1,233 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2013-2015 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_dprintf "%s: loading includes..." "$0" -f_include $BSDCFG_SHARE/dialog.subr -f_include $BSDCFG_SHARE/keymap.subr -f_include $BSDCFG_SHARE/sysrc.subr - -############################################################ CONFIGURATION - -# -# Default file to store keymap selection in -# -: ${KEYMAPFILE:=$BSDINSTALL_TMPETC/rc.conf.keymap} - -############################################################ GLOBALS - -# -# Strings that should be moved to an i18n file and loaded with f_include_lang() -# -hline_arrows_tab_enter="Press arrows, TAB or ENTER" -msg_continue_with_keymap="Continue with %s keymap" -msg_default="default" -msg_error="Error" -msg_freebsd_installer="FreeBSD Installer" -msg_keymap_menu_text="The system console driver for FreeBSD defaults to standard \"US\"\nkeyboard map. Other keymaps can be chosen below." -msg_keymap_selection="Keymap Selection" -msg_ok="OK" -msg_select="Select" -msg_test_keymap="Test %s keymap" -msg_test_the_currently_selected_keymap="Test the currently selected keymap" -msg_test_the_keymap_by_typing="Test the keymap by typing letters, numbers, and symbols. Characters\nshould match labels on the keyboard keys. Press Enter to stop testing." - -############################################################ FUNCTIONS - -# dialog_keymap_test $keymap -# -# Activate $keymap and display an input box (without cancel button) for the -# user to test keyboard input and return. Always returns success. -# -dialog_keymap_test() -{ - local keym="$1" - local title= # Calculated below - local btitle= # Calculated below - local prompt="$msg_test_the_keymap_by_typing" - local hline= - - # Attempt to activate the keymap - if [ "$keym" ]; then - local err - err=$( f_keymap_kbdcontrol "$keym" 2>&1 > /dev/null ) - if [ "$err" ]; then - f_dialog_title "$msg_error" - f_dialog_msgbox "$err" - f_dialog_title_restore - return $FAILURE - fi - fi - - f_dialog_title "$( printf "$msg_test_keymap" "${keym:-$msg_default}" )" - title="$DIALOG_TITLE" - btitle="$DIALOG_BACKTITLE" - f_dialog_title_restore - - local height width - f_dialog_inputbox_size height width \ - "$title" "$btitle" "$prompt" "" "$hline" - - $DIALOG \ - --title "$title" \ - --backtitle "$btitle" \ - --hline "$hline" \ - --ok-label "$msg_ok" \ - --no-cancel \ - --inputbox "$prompt" \ - $height $width \ - 2>/dev/null >&$DIALOG_TERMINAL_PASSTHRU_FD - - return $DIALOG_OK -} - -############################################################ MAIN - -# -# Initialize -# -f_dialog_title "$msg_keymap_selection" -f_dialog_backtitle "$msg_freebsd_installer" - -# -# Die immediately if we can't dump the current keyboard map -# -#error=$( kbdcontrol -d 2>&1 > /dev/null ) || f_die $FAILURE "%s" "$error" - -# Capture Ctrl-C for clean-up -trap 'rm -f $KEYMAPFILE; exit $FAILURE' SIGINT - -# Get a value from rc.conf(5) as initial value (if not being scripted) -f_getvar $VAR_KEYMAP keymap -if [ ! "$keymap" ]; then - keymap=$( f_sysrc_get keymap ) - case "$keymap" in [Nn][Oo]) keymap="";; esac -fi - -# -# Loop until the user has finalized their selection (by clicking the -# [relabeled] Cancel button). -# -width=67 first_pass=1 back_from_testing= -[ "$USE_XDIALOG" ] && width=70 -prompt="$msg_keymap_menu_text" -hline="$hline_arrows_tab_enter" -while :; do - # - # Re/Build list of keymaps - # - cont_msg=$( printf "$msg_continue_with_keymap" \ - "${keymap:-$msg_default}" ) - test_msg=$( printf "$msg_test_keymap" "${keymap:-$msg_default}" ) - menu_list=" - '>>> $cont_msg' '' '$msg_continue_with_current_keymap' - '->- $test_msg' '' '$msg_test_the_currently_selected_keymap' - " # END-QUOTE - if [ "$first_pass" ]; then - defaultitem= - first_pass= - else - defaultitem="->- $test_msg" - fi - for k in $KEYMAPS; do - keymap_$k get keym keym - keymap_$k get desc desc - radio=" " - if [ "$keym" = "$keymap" ]; then - radio="*" - if [ "$back_from_testing" ]; then - defaultitem="(*) $desc" - back_from_testing= - fi - fi - f_shell_escape "$desc" desc - menu_list="$menu_list - '($radio) $desc' '' '$keym: $desc' - " # END-QUOTE - done - back_from_testing= - - # - # Display keymap configuration menu - # - eval f_dialog_menu_with_help_size height \"\" rows \ - \"\$DIALOG_TITLE\" \ - \"\$DIALOG_BACKTITLE\" \ - \"\$prompt\" \ - \"\$hline\" \ - $menu_list - menu_choice=$( eval $DIALOG \ - --title \"\$DIALOG_TITLE\" \ - --backtitle \"\$DIALOG_BACKTITLE\" \ - --hline \"\$hline\" \ - --keep-tite \ - --item-help \ - --ok-label \"\$msg_select\" \ - --cancel-label \"\$msg_cancel\" \ - --default-item \"\$defaultitem\" \ - --menu \"\$prompt\" \ - $height $width $rows \ - $menu_list \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) || { - f_quietly rm -f "$KEYMAPFILE" - exit $FAILURE # Exit with an error so bsdinstall restarts - } - f_dialog_data_sanitize menu_choice - - case "$menu_choice" in - ">>> "*) # Continue with keymap - break ;; - "->-"*) # Test keymap - dialog_keymap_test "$keymap" - back_from_testing=1 - continue ;; - esac - - # Turn the user's choice into a number - n=$( eval f_dialog_menutag2index_with_help \ - \"\$menu_choice\" $menu_list ) - - # Turn that number ithe name of the keymap struct - k=$( set -- $KEYMAPS; eval echo \"\${$(( $n - 2))}\" ) - - # Get actual keymap setting while we update $keymap and $KEYMAPFILE - keymap_$k get keym keymap - echo "keymap=\"$keymap\"" > "$KEYMAPFILE" -done - -f_quietly f_keymap_kbdcontrol "$keymap" -exit $SUCCESS - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/mirrorselect b/bsdinstall/scripts/mirrorselect deleted file mode 100755 index 67ef5f2c02a6..000000000000 --- a/bsdinstall/scripts/mirrorselect +++ /dev/null @@ -1,179 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -: ${DIALOG_OK=0} -: ${DIALOG_CANCEL=1} -: ${DIALOG_HELP=2} -: ${DIALOG_EXTRA=3} -: ${DIALOG_ITEM_HELP=4} -: ${DIALOG_ESC=255} - -exec 3>&1 -MIRROR=`../../bsddialog --backtitle "FreeBSD Installer" \ - --title "Mirror Selection" --extra-button --extra-label "Other" \ - --menu "Please select the site closest to you or \"other\" if you'd like to specify a different choice. Also note that not every site listed here carries more than the base distribution kits. Only Primary sites are guaranteed to carry the full range of possible distributions. Select a site that's close!" \ - 0 0 0 \ - ftp://ftp.freebsd.org "Main Site"\ - ftp://ftp.freebsd.org "IPv6 Main Site"\ - ftp://ftp3.ie.freebsd.org "IPv6 Ireland"\ - ftp://ftp2.jp.freebsd.org "IPv6 Japan"\ - ftp://ftp4.se.freebsd.org "IPv6 Sweden"\ - ftp://ftp4.us.freebsd.org "IPv6 USA"\ - ftp://ftp1.freebsd.org "Primary"\ - ftp://ftp2.freebsd.org "Primary #2"\ - ftp://ftp3.freebsd.org "Primary #3"\ - ftp://ftp4.freebsd.org "Primary #4"\ - ftp://ftp5.freebsd.org "Primary #5"\ - ftp://ftp6.freebsd.org "Primary #6"\ - ftp://ftp7.freebsd.org "Primary #7"\ - ftp://ftp10.freebsd.org "Primary #10"\ - ftp://ftp11.freebsd.org "Primary #11"\ - ftp://ftp12.freebsd.org "Primary #12"\ - ftp://ftp13.freebsd.org "Primary #13"\ - ftp://ftp14.freebsd.org "Primary #14"\ - ftp://ftp.au.freebsd.org "Australia"\ - ftp://ftp2.au.freebsd.org "Australia #2"\ - ftp://ftp3.au.freebsd.org "Australia #3"\ - ftp://ftp.at.freebsd.org "Austria"\ - ftp://ftp2.br.freebsd.org "Brazil #2"\ - ftp://ftp3.br.freebsd.org "Brazil #3"\ - ftp://ftp4.br.freebsd.org "Brazil #4"\ - ftp://ftp.bg.freebsd.org "Bulgaria"\ - ftp://ftp.cn.freebsd.org "China"\ - ftp://ftp.cz.freebsd.org "Czech Republic"\ - ftp://ftp.dk.freebsd.org "Denmark"\ - ftp://ftp.fi.freebsd.org "Finland"\ - ftp://ftp.fr.freebsd.org "France"\ - ftp://ftp3.fr.freebsd.org "France #3"\ - ftp://ftp4.fr.freebsd.org "IPv6 France #4"\ - ftp://ftp5.fr.freebsd.org "France #5"\ - ftp://ftp6.fr.freebsd.org "France #6"\ - ftp://ftp7.fr.freebsd.org "France #7"\ - ftp://ftp8.fr.freebsd.org "IPv6 France #8"\ - ftp://ftp.de.freebsd.org "Germany"\ - ftp://ftp2.de.freebsd.org "Germany #2"\ - ftp://ftp4.de.freebsd.org "Germany #4"\ - ftp://ftp5.de.freebsd.org "Germany #5"\ - ftp://ftp7.de.freebsd.org "Germany #7"\ - ftp://ftp8.de.freebsd.org "Germany #8"\ - ftp://ftp.gr.freebsd.org "Greece"\ - ftp://ftp2.gr.freebsd.org "Greece #2"\ - ftp://ftp3.ie.freebsd.org "Ireland #3"\ - ftp://ftp.jp.freebsd.org "Japan"\ - ftp://ftp2.jp.freebsd.org "Japan #2"\ - ftp://ftp3.jp.freebsd.org "Japan #3"\ - ftp://ftp4.jp.freebsd.org "Japan #4"\ - ftp://ftp5.jp.freebsd.org "Japan #5"\ - ftp://ftp6.jp.freebsd.org "Japan #6"\ - ftp://ftp7.jp.freebsd.org "Japan #7"\ - ftp://ftp8.jp.freebsd.org "Japan #8"\ - ftp://ftp9.jp.freebsd.org "Japan #9"\ - ftp://ftp.kr.freebsd.org "Korea"\ - ftp://ftp2.kr.freebsd.org "Korea #2"\ - ftp://ftp.lv.freebsd.org "Latvia"\ - ftp://ftp.nl.freebsd.org "Netherlands"\ - ftp://ftp2.nl.freebsd.org "Netherlands #2"\ - ftp://ftp.nz.freebsd.org "New Zealand"\ - ftp://ftp.no.freebsd.org "Norway"\ - ftp://ftp.pl.freebsd.org "Poland"\ - ftp://ftp.ru.freebsd.org "Russia"\ - ftp://ftp2.ru.freebsd.org "Russia #2"\ - ftp://ftp5.ru.freebsd.org "Russia #5"\ - ftp://ftp6.ru.freebsd.org "Russia #6"\ - ftp://ftp.sk.freebsd.org "Slovak Republic"\ - ftp://ftp2.sk.freebsd.org "Slovak Republic #2"\ - ftp://ftp.si.freebsd.org "Slovenia"\ - ftp://ftp.za.freebsd.org "South Africa"\ - ftp://ftp2.za.freebsd.org "South Africa #2"\ - ftp://ftp4.za.freebsd.org "South Africa #4"\ - ftp://ftp.se.freebsd.org "Sweden"\ - ftp://ftp4.se.freebsd.org "Sweden #4"\ - ftp://ftp.ch.freebsd.org "Switzerland"\ - ftp://ftp.tw.freebsd.org "Taiwan"\ - ftp://ftp2.tw.freebsd.org "Taiwan #2"\ - ftp://ftp3.tw.freebsd.org "Taiwan #3"\ - ftp://ftp4.tw.freebsd.org "Taiwan #4"\ - ftp://ftp6.tw.freebsd.org "Taiwan #6"\ - ftp://ftp11.tw.freebsd.org "Taiwan #11"\ - ftp://ftp.uk.freebsd.org "UK"\ - ftp://ftp2.uk.freebsd.org "UK #2"\ - ftp://ftp3.uk.freebsd.org "UK #3"\ - ftp://ftp4.uk.freebsd.org "UK #4"\ - ftp://ftp5.uk.freebsd.org "UK #5"\ - ftp://ftp.ua.freebsd.org "Ukraine"\ - ftp://ftp1.us.freebsd.org "USA #1"\ - ftp://ftp2.us.freebsd.org "USA #2"\ - ftp://ftp3.us.freebsd.org "USA #3"\ - ftp://ftp4.us.freebsd.org "USA #4"\ - ftp://ftp5.us.freebsd.org "USA #5"\ - ftp://ftp6.us.freebsd.org "USA #6"\ - ftp://ftp8.us.freebsd.org "USA #8"\ - ftp://ftp10.us.freebsd.org "USA #10"\ - ftp://ftp11.us.freebsd.org "USA #11"\ - ftp://ftp13.us.freebsd.org "USA #13"\ - ftp://ftp14.us.freebsd.org "USA #14"\ - ftp://ftp15.us.freebsd.org "USA #15"\ - 2>&1 1>&3` -MIRROR_BUTTON=$? -exec 3>&- - -_UNAME_R=`uname -r` -_UNAME_R=${_UNAME_R%-p*} - -case ${_UNAME_R} in - *-ALPHA*|*-CURRENT|*-STABLE|*-PRERELEASE) - RELDIR="snapshots" - ;; - *) - RELDIR="releases" - ;; -esac - -BSDINSTALL_DISTSITE="$MIRROR/pub/FreeBSD/${RELDIR}/`uname -m`/`uname -p`/${_UNAME_R}" - -case $MIRROR_BUTTON in -$DIALOG_CANCEL) - exit 1 - ;; -$DIALOG_OK) - ;; -$DIALOG_EXTRA) - exec 3>&1 - BSDINSTALL_DISTSITE=`../../bsddialog --backtitle "FreeBSD Installer" \ - --title "Mirror Selection" \ - --inputbox "Please enter the URL to an alternate FreeBSD mirror:" \ - 0 30 "$BSDINSTALL_DISTSITE" 2>&1 1>&3` - #0 0 "$BSDINSTALL_DISTSITE" 2>&1 1>&3` known bug: inputbox cols autosize - MIRROR_BUTTON=$? - exec 3>&- - test $MIRROR_BUTTON -eq 0 || exec $0 $@ - ;; -esac - -export BSDINSTALL_DISTSITE -echo $BSDINSTALL_DISTSITE >&2 diff --git a/bsdinstall/scripts/mount b/bsdinstall/scripts/mount deleted file mode 100755 index c7bc1aa5387d..000000000000 --- a/bsdinstall/scripts/mount +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -TMP_FSTAB=${TMPDIR:-"/tmp"}/bsdinstall-tmp-fstab - -cat $PATH_FSTAB | awk -v BSDINSTALL_CHROOT=$BSDINSTALL_CHROOT '{ - if ($2 ~ "^/.*") { - fsname = $2; - if (fsname == "/") - fsname = "" - printf("%s\t%s%s\t%s\t%s\t%s\t%s\n", $1, BSDINSTALL_CHROOT, - fsname, $3, $4, $5, $6); - } -}' > $TMP_FSTAB - -FILESYSTEMS=`cat $TMP_FSTAB | awk '/^[^#].*/ {if ($2 ~ "^/.*") printf("%s\n", $2);}' | sort -t /` - -for i in $FILESYSTEMS; do - mkdir -p $i 2>/dev/null - MNTERROR=`mount -F $TMP_FSTAB $i 2>&1` - if [ $? -ne 0 ]; then - dialog --backtitle "FreeBSD Installer" --title "Error" \ - --msgbox "Error mounting partition $i:\n$MNTERROR" 0 0 - exit 1 - fi -done - -# User might want a shell and require devfs, so mount it -mkdir $BSDINSTALL_CHROOT/dev 2>/dev/null -mount -t devfs devfs $BSDINSTALL_CHROOT/dev diff --git a/bsdinstall/scripts/netconfig b/bsdinstall/scripts/netconfig deleted file mode 100755 index f9913c324228..000000000000 --- a/bsdinstall/scripts/netconfig +++ /dev/null @@ -1,217 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# Copyright (c) 2011 The FreeBSD Foundation -# All rights reserved. -# -# Portions of this software were developed by Bjoern Zeeb -# under sponsorship from the FreeBSD Foundation. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -INTERFACES="" -DIALOG_TAGS="" - -: ${DIALOG_OK=0} -: ${DIALOG_CANCEL=1} -: ${DIALOG_HELP=2} -: ${DIALOG_EXTRA=3} -: ${DIALOG_ITEM_HELP=4} -: ${DIALOG_ESC=255} - -for IF in `ifconfig -l`; do - test "$IF" = "lo0" && continue - (ifconfig -g wlan | egrep -wq $IF) && continue - INTERFACES="$INTERFACES $IF" -done - -INTERFACES="$INTERFACES $(sysctl -in net.wlan.devices)" -is_wireless_if() { - for IF in $(sysctl -in net.wlan.devices); do - if [ $IF = $1 ]; then - return 0 - fi - done - return 1 -} - -for IF in $INTERFACES; do - DESC=`sysctl -n dev.$(echo $IF | sed -E 's/([[:alpha:]]*)([[:digit:]]*)/\1.\2/g').%desc` - DIALOG_TAGS="$DIALOG_TAGS $IF \"$DESC\"" -done - -if [ -z "$INTERFACES" ]; then - dialog --backtitle 'FreeBSD Installer' \ - --title 'Network Configuration Error' \ - --msgbox 'No network interfaces present to configure.' 0 0 - exit 1 -fi - -exec 3>&1 -INTERFACE=`echo $DIALOG_TAGS | xargs dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' --menu 'Please select a network interface to configure:' 0 0 0 2>&1 1>&3` -if [ $? -eq $DIALOG_CANCEL ]; then exit 1; fi -exec 3>&- - -: > $BSDINSTALL_TMPETC/._rc.conf.net - -IFCONFIG_PREFIX="" -if is_wireless_if $INTERFACE; then - NEXT_WLAN_IFACE=wlan0 # XXX - echo wlans_$INTERFACE=\"$NEXT_WLAN_IFACE\" >> $BSDINSTALL_TMPETC/._rc.conf.net - IFCONFIG_PREFIX="WPA " - if [ ! -z $BSDINSTALL_CONFIGCURRENT ]; then - ifconfig $NEXT_WLAN_IFACE create wlandev $INTERFACE - ifconfig $NEXT_WLAN_IFACE up - fi - bsdinstall wlanconfig $NEXT_WLAN_IFACE || exec $0 - INTERFACE="$NEXT_WLAN_IFACE" -fi - -IPV6_AVAIL=0 -IPV4_AVAIL=0 -sysctl -N kern.features.inet6 > /dev/null 2>&1 -case $? in -0) IPV6_AVAIL=1 ;; -esac -sysctl -N kern.features.inet > /dev/null 2>&1 -case $? in -0) IPV4_AVAIL=1 ;; -esac - -if [ ${IPV4_AVAIL} -eq 1 ]; then - dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' \ - --yesno 'Would you like to configure IPv4 for this interface?' 0 0 - if [ $? -eq $DIALOG_OK ]; then - bsdinstall netconfig_ipv4 ${INTERFACE} "${IFCONFIG_PREFIX}" || \ - exec $0 - else - IPV4_AVAIL=0 - fi -fi -# In case wlanconfig left an option and we do not support IPv4 we need to write -# it out on its own. We cannot write it out with IPv6 as that suffix. -if [ ${IPV4_AVAIL} -eq 0 -a -n ${IFCONFIG_PREFIX} ]; then - echo ifconfig_${INTERFACE}=\"${IFCONFIG_PREFIX}\" >> $BSDINSTALL_TMPETC/._rc.conf.net -fi -if [ ${IPV6_AVAIL} -eq 1 ]; then - dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' \ - --yesno 'Would you like to configure IPv6 for this interface?' 0 0 - if [ $? -eq $DIALOG_OK ]; then - bsdinstall netconfig_ipv6 ${INTERFACE} || exec $0 - else - IPV6_AVAIL=0 - fi -fi - -SEARCH="" -IP4_1="" -IP4_2="" -IP6_1="" -IP6_2="" -while read key value; do - case "${key}" in - search) SEARCH="${value}" ;; - nameserver) # is more trick as we have to distinguish v4 and v6 - case "${value}" in - [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) - if [ -z "${IP4_1}" ] ; then - IP4_1="${value}" - elif [ -z "${IP4_2}" ]; then - IP4_2="${value}" - fi - ;; - [0-9A-Fa-f:]*:*) - if [ -z "${IP6_1}" ] ; then - IP6_1="${value}" - elif [ -z "${IP6_2}" ]; then - IP6_2="${value}" - fi - ;; - esac - ;; - # ignore others - esac -done < ${BSDINSTALL_TMPETC}/resolv.conf - -RESOLV="" -if [ ${IPV6_AVAIL} -eq 1 -a ${IPV4_AVAIL} -eq 1 ]; then - RESOLV=" - 'Search' 1 0 \"${SEARCH}\" 1 16 50 0 0 - 'Nameserver' 2 0 \"Nameserver\" 2 16 50 0 2 - 'IPv6 DNS #1' 2 0 \"${IP6_1}\" 2 16 50 0 0 - 'IPv6 DNS #2' 3 0 \"${IP6_2}\" 3 16 50 0 0 - 'IPv4 DNS #1' 4 0 \"${IP4_1}\" 4 16 16 0 0 - 'IPv4 DNS #2' 5 0 \"${IP4_2}\" 5 16 16 0 0" -elif [ ${IPV6_AVAIL} -eq 1 ]; then - RESOLV=" - 'Search' 1 0 \"${SEARCH}\" 1 16 50 0 0 - 'Nameserver' 2 0 \"Nameserver\" 2 16 50 0 2 - 'IPv6 DNS #1' 2 0 \"${IP6_1}\" 2 16 50 0 0 - 'IPv6 DNS #2' 3 0 \"${IP6_2}\" 3 16 50 0 0" -elif [ ${IPV4_AVAIL} -eq 1 ]; then - RESOLV=" - 'Search' 1 0 \"${SEARCH}\" 1 16 50 0 0 - 'Nameserver' 2 0 \"Nameserver\" 2 16 50 0 2 - 'IPv4 DNS #1' 2 0 \"${IP4_1}\" 2 16 16 0 0 - 'IPv4 DNS #2' 3 0 \"${IP4_2}\" 3 16 16 0 0" -else - exit 0 -fi - -exec 3>&1 -RESOLV=$(echo "${RESOLV}" | xargs dialog --backtitle 'FreeBSD Installer' \ - --title 'Network Configuration' \ - --mixedform 'Resolver Configuration' 0 0 0 \ -2>&1 1>&3) -if [ $? -eq $DIALOG_CANCEL ]; then exec $0; fi -exec 3>&- - -echo ${RESOLV} | tr ' ' '\n' | \ -awk ' -BEGIN { - search=-1; -} -{ - if (/^[[:space:]]+$/) { - next; - } - if (/^Nameserver$/) { - printf "\n"; - search=0; - next; - } - if (search == -1) { - printf "search "; - search=1; - } - if (search > 0) { - printf "%s%s", (search > 1) ? " " : "", $1; - search++; - next; - } - printf "nameserver %s\n", $1; -}' > ${BSDINSTALL_TMPETC}/resolv.conf - -mv $BSDINSTALL_TMPETC/._rc.conf.net $BSDINSTALL_TMPETC/rc.conf.net diff --git a/bsdinstall/scripts/netconfig_ipv4 b/bsdinstall/scripts/netconfig_ipv4 deleted file mode 100755 index 2acd9029d150..000000000000 --- a/bsdinstall/scripts/netconfig_ipv4 +++ /dev/null @@ -1,103 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2013-2015 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_dprintf "%s: loading includes..." "$0" -f_include $BSDCFG_SHARE/dialog.subr - -############################################################ MAIN - -INTERFACE=$1 -IFCONFIG_PREFIX="$2" -test -z "$IFCONFIG_PREFIX" || IFCONFIG_PREFIX="$2 " -case "${INTERFACE}" in -"") dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' \ - --msgbox 'No interface specified for IPv4 configuration.' 0 0 - exit 1 - ;; -esac - -dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' --yesno 'Would you like to use DHCP to configure this interface?' 0 0 -if [ $? -eq $DIALOG_OK ]; then - if [ ! -z $BSDINSTALL_CONFIGCURRENT ]; then - ifconfig $INTERFACE up - dialog --backtitle 'FreeBSD Installer' --infobox "Acquiring DHCP lease..." 0 0 - err=$( pkill -F /var/run/dhclient/dhclient.${INTERFACE}.pid; dhclient $INTERFACE 2>&1 ) - if [ $? -ne 0 ]; then - f_dprintf "%s" "$err" - dialog --backtitle 'FreeBSD Installer' --msgbox "DHCP lease acquisition failed." 0 0 - exec $0 ${INTERFACE} "${IFCONFIG_PREFIX}" - fi - fi - echo ifconfig_$INTERFACE=\"${IFCONFIG_PREFIX}DHCP\" >> $BSDINSTALL_TMPETC/._rc.conf.net - exit 0 -fi - -IP_ADDRESS=`ifconfig $INTERFACE inet | awk '/inet/ {printf("%s\n", $2); }'` -NETMASK=`ifconfig $INTERFACE inet | awk '/inet/ {printf("%s\n", $4); }'` -ROUTER=`netstat -rn -f inet | awk '/default/ {printf("%s\n", $2);}'` - -exec 3>&1 -IF_CONFIG=$(dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' --form 'Static Network Interface Configuration' 0 0 0 \ - 'IP Address' 1 0 "$IP_ADDRESS" 1 20 16 0 \ - 'Subnet Mask' 2 0 "$NETMASK" 2 20 16 0 \ - 'Default Router' 3 0 "$ROUTER" 3 20 16 0 \ -2>&1 1>&3) -if [ $? -eq $DIALOG_CANCEL ]; then exit 1; fi -exec 3>&- - -echo $INTERFACE $IF_CONFIG | - awk -v prefix="$IFCONFIG_PREFIX" '{ - printf("ifconfig_%s=\"%s\inet %s netmask %s\"\n", $1, prefix, $2, $3); - printf("defaultrouter=\"%s\"\n", $4); - }' >> $BSDINSTALL_TMPETC/._rc.conf.net -retval=$? - -if [ "$BSDINSTALL_CONFIGCURRENT" ]; then - . $BSDINSTALL_TMPETC/._rc.conf.net - if [ -n "$2" ]; then - ifconfig $INTERFACE `eval echo \\\$ifconfig_$INTERFACE | sed "s|$2||"` - else - ifconfig $INTERFACE `eval echo \\\$ifconfig_$INTERFACE` - fi - if [ "$defaultrouter" ]; then - route delete -inet default - route add -inet default $defaultrouter - retval=$? - fi -fi - -exit $retval - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/netconfig_ipv6 b/bsdinstall/scripts/netconfig_ipv6 deleted file mode 100755 index abc53906f4ad..000000000000 --- a/bsdinstall/scripts/netconfig_ipv6 +++ /dev/null @@ -1,160 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2011 The FreeBSD Foundation -# Copyright (c) 2013-2015 Devin Teske -# All rights reserved. -# -# Portions of this software were developed by Bjoern Zeeb -# under sponsorship from the FreeBSD Foundation. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_dprintf "%s: loading includes..." "$0" -f_include $BSDCFG_SHARE/dialog.subr - -############################################################ MAIN - -# -# TODO: -# - Add DHCPv6 support once FreeBSD ships with it. -# - -INTERFACE=$1 -case "${INTERFACE}" in -"") dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' \ - --msgbox 'No interface specified for IPv6 configuration.' 0 0 - exit 1 - ;; -esac - -AGAIN="" -while : ; do - MSG="Would you like to try stateless address autoconfiguration (SLAAC)${AGAIN}?" - dialog --backtitle 'FreeBSD Installer' --title 'Network Configuration' \ - --yesno "${MSG}" 0 0 - if [ $? -eq $DIALOG_OK ]; then - if [ ! -z $BSDINSTALL_CONFIGCURRENT ]; then - dialog --backtitle 'FreeBSD Installer' \ - --infobox "Sending Router Solicitation ..." 0 0 - ifconfig ${INTERFACE} inet6 -ifdisabled accept_rtadv up - err=$( rtsol -F $INTERFACE 2>&1 ) - if [ $? -ne 0 ]; then - f_dprintf "%s" "$err" - dialog --backtitle 'FreeBSD Installer' --msgbox "SLAAC failed." 0 0 - AGAIN=" again" - continue - fi - fi - echo ifconfig_${INTERFACE}_ipv6=\"inet6 accept_rtadv\" >> $BSDINSTALL_TMPETC/._rc.conf.net - exit 0 - else - break - fi -done - -ROUTER6=`netstat -Wrn -f inet6 | awk '/default/ {printf("%s\n", $2);}'` -ADDRS=`ifconfig ${INTERFACE} inet6 | \ -awk -v dfr="${ROUTER6}" ' -BEGIN { - n=0; -} -{ - if (/inet6/) { - if (match($2, "^fe80:")) { next; }; - # For the moment ignore all but the first address; it might confuse the user. - if (n > 0) { next; }; - n++; - printf "\"IPv6 Address\" %d 0 \"%s/%s\" %d 16 50 0 0 ", n, $2, $4, n; - } -} -END { - if (n == 0) { - n++; - printf "\"IPv6 Address\" %d 0 \"\" %d 16 50 0 0 ", n, n; - } - n++; - # Nasty trick adding a (hidden, same y) read-only field as a marker - # to separate interface address(es) from the default router. - printf "\"Default Router\" %d 0 \"%s\" %d 16 50 0 2 ", n, "DefaultRouter", n; - printf "\"Default Router\" %d 0 \"%s\" %d 16 50 0 0 ", n, dfr, n; -}'` - -exec 3>&1 -IF_CONFIG=$(echo ${ADDRS} | xargs dialog --backtitle 'FreeBSD Installer' \ - --title 'Network Configuration' \ - --mixedform 'Static IPv6 Network Interface Configuration' 0 0 0 \ -2>&1 1>&3) -if [ $? -eq $DIALOG_CANCEL ]; then exit 1; fi -exec 3>&- - -echo ${IF_CONFIG} | tr ' ' '\n' | \ -awk -v iface="${INTERFACE}" ' -BEGIN { - dfr=0; - count=0; -} -{ - if (/^[[:space:]]+$/) { - next; - } - if (/DefaultRouter/) { - dfr=1; - next; - } - if (dfr == 1) { - printf("ipv6_defaultrouter=\"%s\"\n", $1); - next; - } - if (count > 0) { - # Ignore all but the first IP address for now. - next; - } - count++; - if (!match($1, "/")) { - sub("$", "/64", $1); - } - printf("ifconfig_%s_ipv6=\"inet6 %s\"\n", iface, $1); -}' >> $BSDINSTALL_TMPETC/._rc.conf.net -retval=$? - -if [ "$BSDINSTALL_CONFIGCURRENT" ]; then - . $BSDINSTALL_TMPETC/._rc.conf.net - ifconfig ${INTERFACE} `eval echo \\\$ifconfig_${INTERFACE}_ipv6` - if [ "$ipv6_defaultrouter" ]; then - route delete -inet6 default - route add -inet6 default ${ipv6_defaultrouter} - retval=$? - fi -fi - -exit $retval - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/rootpass b/bsdinstall/scripts/rootpass deleted file mode 100755 index 7764a51b62fb..000000000000 --- a/bsdinstall/scripts/rootpass +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -clear -echo "FreeBSD Installer" -echo "========================" -echo - -echo "Please select a password for the system management account (root):" -echo "Typed characters will not be visible." - -chroot $BSDINSTALL_CHROOT passwd root 2>&1 diff --git a/bsdinstall/scripts/script b/bsdinstall/scripts/script deleted file mode 100755 index 8d9dd5205132..000000000000 --- a/bsdinstall/scripts/script +++ /dev/null @@ -1,182 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2013 Nathan Whitehorn -# Copyright (c) 2013-2015 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_dprintf "%s: loading includes..." "$0" -f_include $BSDCFG_SHARE/dialog.subr -f_include $BSDCFG_SHARE/variable.subr - -############################################################ CONFIGURATION - -# VARIABLES: -# PARTITIONS -# DISTRIBUTIONS -# BSDINSTALL_DISTDIR - -# -# Default name of the ZFS boot-pool -# -: ${ZFSBOOT_POOL_NAME:=zroot} - -############################################################ GLOBALS - -: ${TMPDIR:="/tmp"} - -# -# Strings that should be moved to an i18n file and loaded with f_include_lang() -# -msg_installation_error="Installation Error!" - -############################################################ FUNCTIONS - -error() -{ - local file - f_getvar "$VAR_DEBUG_FILE#+" file - if [ "$file" ]; then - f_dialog_title "$msg_installation_error" - f_dialog_textbox "$file" - # No need to restore title, pining for the fjords - fi - - [ -f "$PATH_FSTAB" ] || exit - if [ "$ZFSBOOT_DISKS" ]; then - zpool export $ZFSBOOT_POOL_NAME - else - bsdinstall umount - fi - - exit 1 -} - -############################################################ MAIN - -set -e -trap error EXIT - -SCRIPT="$1" -shift - -f_dprintf "Began Installation at %s" "$( date )" -rm -rf $BSDINSTALL_TMPETC -mkdir $BSDINSTALL_TMPETC - -split -a 2 -p '^#!.*' "$SCRIPT" $TMPDIR/bsdinstall-installscript- - -. $TMPDIR/bsdinstall-installscript-aa -: ${DISTRIBUTIONS="kernel.txz base.txz"}; export DISTRIBUTIONS -export BSDINSTALL_DISTDIR - -# Re-initialize a new log if preamble changed BSDINSTALL_LOG -if [ "$BSDINSTALL_LOG" != "${debugFile#+}" ]; then - export debugFile="$BSDINSTALL_LOG" - f_quietly f_debug_init - # NB: Being scripted, let debug go to terminal for invalid debugFile - f_dprintf "Began Installation at %s" "$( date )" -fi - -# Make partitions -rm -f $PATH_FSTAB -touch $PATH_FSTAB -if [ "$ZFSBOOT_DISKS" ]; then - bsdinstall zfsboot -else - bsdinstall scriptedpart "$PARTITIONS" -fi -bsdinstall mount - -# Fetch missing distribution files, if any -exec 3>&1 -export BSDINSTALL_DISTDIR=$(`dirname $0`/fetchmissingdists 2>&1 1>&3) -FETCH_RESULT=$? -exec 3>&- - -[ $FETCH_RESULT -ne 0 ] && error "Could not fetch remote distributions" - -# Unpack distributions -bsdinstall checksum -if [ -t 0 ]; then - # If install is a tty, use distextract as normal - bsdinstall distextract -else - # Otherwise, we need to use tar (see https://reviews.freebsd.org/D10736) - for set in $DISTRIBUTIONS; do - f_dprintf "Extracting $BSDINSTALL_DISTDIR/$set" - # XXX: The below fails if any mountpoints are FAT, due to - # inability to set ctime/mtime on the root of FAT partitions, - # which is needed to support e.g. EFI system partitions. tar has - # no option to ignore this (distextract ignores them internally - # through a hack), and returns 1 on any warning or error, - # effectively turning all warnings into fatal errors. - # - # Work around this in an extremely lame way for the specific - # case of EFI system partitions only. This *ONLY WORKS* if - # /boot/efi is empty and does not handle analagous problems on - # other systems (ARM, PPC64). - tar -xf "$BSDINSTALL_DISTDIR/$set" -C $BSDINSTALL_CHROOT --exclude boot/efi - mkdir -p $BSDINSTALL_CHROOT/boot/efi - done -fi - -# Configure bootloader if needed -bsdinstall bootconfig - -# Finalize install -bsdinstall config - -# Make sure networking is functional, if we can arrange that -if [ ! -f $BSDINSTALL_CHROOT/etc/resolv.conf -a -f /etc/resolv.conf ]; then - cp /etc/resolv.conf $BSDINSTALL_CHROOT/etc/resolv.conf -fi - -# Run post-install script -if [ -f $TMPDIR/bsdinstall-installscript-ab ]; then - cp $TMPDIR/bsdinstall-installscript-ab $BSDINSTALL_CHROOT/tmp/installscript - chmod a+x $BSDINSTALL_CHROOT/tmp/installscript - chroot $BSDINSTALL_CHROOT /tmp/installscript $@ 2>&1 - rm $BSDINSTALL_CHROOT/tmp/installscript -fi - -bsdinstall entropy -if [ "$ZFSBOOT_DISKS" ]; then - zpool export $ZFSBOOT_POOL_NAME -fi -bsdinstall umount - -f_dprintf "Installation Completed at %s" "$( date )" - -trap - EXIT -exit $SUCCESS - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/services b/bsdinstall/scripts/services deleted file mode 100755 index c59628b2a88c..000000000000 --- a/bsdinstall/scripts/services +++ /dev/null @@ -1,70 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -: ${DIALOG_OK=0} - -if [ -f $BSDINSTALL_TMPETC/rc.conf.services ]; then - eval $( sed -e s/YES/on/i -e s/NO/off/i \ - $BSDINSTALL_TMPETC/rc.conf.services ) -else - # Default service states. Everything is off if not enabled. - sshd_enable="on" -fi - -echo -n > $BSDINSTALL_TMPETC/rc.conf.services - -exec 3>&1 -DAEMONS=$( dialog --backtitle "FreeBSD Installer" \ - --title "System Configuration" --nocancel --separate-output \ - --checklist "Choose the services you would like to be started at boot:" \ - 0 0 0 \ - local_unbound "Local caching validating resolver" ${local_unbound:-off} \ - sshd "Secure shell daemon" ${sshd_enable:-off} \ - moused "PS/2 mouse pointer on console" ${moused_enable:-off} \ - ntpdate "Synchronize system and network time at bootime" \ - ${ntpdate_enable:-off} \ - ntpd "Synchronize system and network time" ${ntpd_enable:-off} \ - powerd "Adjust CPU frequency dynamically if supported" \ - ${powerd_enable:-off} \ - dumpdev "Enable kernel crash dumps to /var/crash" ${dumpdev:-on} \ -2>&1 1>&3 ) -exec 3>&- - -havedump= -for daemon in $DAEMONS; do - [ "$daemon" = "dumpdev" ] && havedump=1 continue - echo ${daemon}_enable=\"YES\" >> $BSDINSTALL_TMPETC/rc.conf.services -done - -echo '# Set dumpdev to "AUTO" to enable crash dumps, "NO"' \ - 'to disable' >> $BSDINSTALL_TMPETC/rc.conf.services -if [ "$havedump" ]; then - echo dumpdev=\"AUTO\" >> $BSDINSTALL_TMPETC/rc.conf.services -else - echo dumpdev=\"NO\" >> $BSDINSTALL_TMPETC/rc.conf.services -fi diff --git a/bsdinstall/scripts/time b/bsdinstall/scripts/time deleted file mode 100755 index 0e6b32adc6b1..000000000000 --- a/bsdinstall/scripts/time +++ /dev/null @@ -1,67 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -# Select timezone -chroot $BSDINSTALL_CHROOT tzsetup - -# Switch to target timezone -saved_TZ="$TZ" -TZ="${BSDINSTALL_CHROOT}/etc/localtime" -export TZ - -# Set date -exec 3>&1 -DATE=$(../../bsddialog --backtitle 'FreeBSD Installer' \ - --title 'Time & Date' \ - --ok-label 'Set Date' \ - --cancel-label 'Skip' \ - --defaultno \ - --date-format '%Y%m%d%H%M.%S' \ - --datebox '' 0 40 \ -2>&1 1>&3) && date $DATE -exec 3>&- - -# Set time -exec 3>&1 -TIME=$(../../bsddialog --backtitle 'FreeBSD Installer' \ - --title 'Time & Date' \ - --ok-label 'Set Time' \ - --cancel-label 'Skip' \ - --defaultno \ - --time-format '%H%M.%S' \ - --timebox '' 0 40 \ -2>&1 1>&3) && date $TIME -exec 3>&- - -# Switch back -if [ -n "$saved_TZ" ]; then - TZ="$saved_TZ" -else - unset TZ -fi -unset saved_TZ diff --git a/bsdinstall/scripts/umount b/bsdinstall/scripts/umount deleted file mode 100755 index 3c33eff7e105..000000000000 --- a/bsdinstall/scripts/umount +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ - -TMP_FSTAB=${TMPDIR:-"/tmp"}/bsdinstall-tmp-fstab - -cat $PATH_FSTAB | awk -v BSDINSTALL_CHROOT=$BSDINSTALL_CHROOT '{ - if ($2 ~ "^/.*") { - fsname = $2; - if (fsname == "/") - fsname = "" - printf("%s\t%s%s\t%s\t%s\t%s\t%s\n", $1, BSDINSTALL_CHROOT, - fsname, $3, $4, $5, $6); - } -}' > $TMP_FSTAB - -umount $BSDINSTALL_CHROOT/dev 2>/dev/null -if [ -n "$TMP_FSTAB" ]; then - umount -F $TMP_FSTAB -a 2>/dev/null -fi diff --git a/bsdinstall/scripts/wlanconfig b/bsdinstall/scripts/wlanconfig deleted file mode 100755 index c2234831be9d..000000000000 --- a/bsdinstall/scripts/wlanconfig +++ /dev/null @@ -1,365 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2011 Nathan Whitehorn -# Copyright (c) 2013-2020 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_include $BSDCFG_SHARE/dialog.subr -f_dialog_backtitle "FreeBSD Installer" - -############################################################ FUNCTIONS - -country_set() -{ - local error_str iface_up ifconfig_args= - - # - # Setup what was selected - # NB: Do not change order of arguments (or regdomain will be ignored) - # - [ "$2" ] && ifconfig_args="$ifconfig_args country $2" - [ "$1" ] && ifconfig_args="$ifconfig_args regdomain $1" - [ "$ifconfig_args" ] || return $SUCCESS # Nothing to do - ifconfig_args="${ifconfig_args# }" - - # Regdomain/country cannot be applied while interface is running - iface_up=$( ifconfig -lu | grep -w "$WLAN_IFACE" ) - [ "$iface_up" ] && ifconfig "$WLAN_IFACE" down - f_eval_catch -dk error_str wlanconfig ifconfig "ifconfig %s %s" \ - "$WLAN_IFACE" "$ifconfig_args" - error_str="${error_str#ifconfig: }" - # Restart wpa_supplicant(8) (should not fail). - [ "$iface_up" ] && f_eval_catch -d wlanconfig wpa_supplicant \ - 'wpa_supplicant -B -i "%s" -c "%s/wpa_supplicant.conf"' \ - "$WLAN_IFACE" "$BSDINSTALL_TMPETC" - if [ "$error_str" ]; then - $DIALOG --title "$msg_error" \ - --backtitle "$DIALOG_BACKTITLE" \ - --yes-label Change \ - --no-label Ignore \ - --yesno \ - "Error while applying chosen settings ($error_str)" \ - 0 0 || return $SUCCESS # Skip - return $FAILURE # Restart - else - cat > "$BSDINSTALL_TMPETC/rc.conf.net.wlan" <<-EOF - create_args_$WLAN_IFACE="$ifconfig_args" - EOF - fi - - return $SUCCESS -} - -dialog_country_select() -{ - local input regdomains countries regdomain country prompt - local no_default="<not selected>" - local default_regdomain="${1:-$no_default}" - local default_country="${2:-$no_default}" - - # - # Parse available countries/regdomains - # - input=$( ifconfig "$WLAN_IFACE" list countries | sed -e 's/DEBUG//gi' ) - regdomains=$( echo "$input" | awk ' - sub(/.*domains:/, ""), /[^[:alnum:][[:space:]]/ { - n = split($0, domains) - for (i = 1; i <= n; i++) - printf "'\''%s'\'' '\'\''", domains[i] - } - ' | sort ) - countries=$( echo "$input" | awk ' - sub(/Country codes:/, ""), sub(/Regulatory.*/, "") { - while (match($0, /[[:upper:]][[:upper:][:digit:]] /)) { - country = substr($0, RSTART) - sub(/ [[:upper:]][[:upper:][:digit:]].*/, "", - country) - code = substr(country, 1, 2) - desc = substr(country, 4) - sub(/[[:space:]]*$/, "", desc) - printf "'\''%s'\'' '\''%s'\''\n", code, desc - $0 = substr($0, RSTART + RLENGTH) - } - } - ' | sort ) - - f_dialog_title "Regdomain selection" - prompt="Select your regdomain." - eval f_dialog_menu_size height width rows \ - \"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \ - \"\$prompt\" \"\" $regdomains - regdomain=$( eval $DIALOG \ - --title \"\$DIALOG_TITLE\" \ - --backtitle \"\$DIALOG_BACKTITLE\" \ - --cancel-label \"\$msg_skip\" \ - --default-item \"\$default_regdomain\" \ - --menu \"\$prompt\" \ - $height $width $rows \ - $regdomains \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) - f_dialog_data_sanitize regdomain - - f_dialog_title "Country selection" - prompt="Select your country." - eval f_dialog_menu_size height width rows \ - \"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \ - \"\$prompt\" \"\" $countries - country=$( eval $DIALOG \ - --title \"\$DIALOG_TITLE\" \ - --backtitle \"\$DIALOG_BACKTITLE\" \ - --cancel-label \"\$msg_skip\" \ - --default-item \"\$default_country\" \ - --menu \"\$prompt\" \ - $height $width $rows \ - $countries \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) - f_dialog_data_sanitize country - - country_set "$regdomain" "$country" -} - -############################################################ MAIN - -: > "$BSDINSTALL_TMPETC/wpa_supplicant.conf" -chmod 0600 "$BSDINSTALL_TMPETC/wpa_supplicant.conf" - -cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF -ctrl_interface=/var/run/wpa_supplicant -eapol_version=2 -ap_scan=1 -fast_reauth=1 - -EOF - -# -# Try to reach wpa_supplicant. If it isn't running and we can modify the -# existing system, start it. Otherwise, fail. -# -if ! f_eval_catch -d wlanconfig wpa_cli "wpa_cli ping"; then - if [ ! "$BSDINSTALL_CONFIGCURRENT" ]; then - f_show_err "Wireless cannot be configured without %s" \ - "making changes to the local system!" - exit 1 - fi - f_eval_catch wlanconfig wpa_supplicant \ - 'wpa_supplicant -B -i "%s" -c "%s/wpa_supplicant.conf"' \ - "$1" "$BSDINSTALL_TMPETC" || exit 1 - - # See if we succeeded - f_eval_catch wlanconfig wpa_cli "wpa_cli ping" || exit 1 -fi - -# -# There is no way to check country/regdomain without (possible) -# interface state modification -# -if [ "$BSDINSTALL_CONFIGCURRENT" ]; then - # Get current country/regdomain for selected interface - WLAN_IFACE=$( wpa_cli ifname | tail -n 1 ) - INPUT=$( ifconfig "$WLAN_IFACE" list regdomain | head -n 1 ) - DEF_REGDOMAIN=$( echo "$INPUT" | cut -w -f 2 ) - DEF_COUNTRY=$( echo "$INPUT" | cut -w -f 4 ) - [ "$DEF_REGDOMAIN" = 0 ] && DEF_REGDOMAIN="<not selected>" - [ "$DEF_COUNTRY" = 0 ] && DEF_COUNTRY="<not selected>" - f_dialog_title "Regdomain/country" - if f_yesno "Change regdomain/country ($DEF_REGDOMAIN/$DEF_COUNTRY)?" - then - while ! dialog_country_select "$DEF_REGDOMAIN" "$DEF_COUNTRY" - do :; done - fi -fi - -while :; do - SCANSSID=0 - f_eval_catch -d wlanconfig wpa_cli "wpa_cli scan" - f_dialog_title "Scanning" - f_dialog_pause "Waiting 5 seconds to scan for wireless networks..." 5 || - exit 1 - - f_eval_catch -dk SCAN_RESULTS wlanconfig wpa_cli "wpa_cli scan_results" - NETWORKS=$( echo "$SCAN_RESULTS" | awk -F '\t' ' - /..:..:..:..:..:../ && $5 { printf "\"%s\"\t\"%s\"\n", $5, $4 } - ' | sort | uniq ) - - if [ ! "$NETWORKS" ]; then - f_dialog_title "$msg_error" - f_yesno "No wireless networks were found. Rescan?" && continue - exit 1 - fi - - f_dialog_title "Network Selection" - prompt="Select a wireless network to connect to." - f_dialog_menu_size height width rows "$DIALOG_TITLE" \ - "$DIALOG_BACKTITLE" "$prompt" "" $menu_list - NETWORK=$( eval $DIALOG \ - --title \"\$DIALOG_TITLE\" \ - --backtitle \"\$DIALOG_BACKTITLE\" \ - --extra-button \ - --extra-label \"Rescan\" \ - --menu \"\$prompt\" \ - $height $width $rows \ - $NETWORKS \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) - retval=$? - f_dialog_data_sanitize NETWORK - case $retval in - $DIALOG_OK) break ;; - $DIALOG_CANCEL) - # Ask if the user wants to select network manually - f_dialog_title "Network Selection" - f_yesno "Do you want to select the network manually?" || exit 1 - f_dialog_input NETWORK "Enter SSID" || exit 1 - prompt="Select encryption type" - menu_list=" - '1 WPA/WPA2 PSK' '' - '2 WPA/WPA2 EAP' '' - '3 WEP' '' - '0 None' '' - " # END-QUOTE - eval f_dialog_menu_size height width rows \"\$DIALOG_TITLE\" \ - \"\$DIALOG_BACKTITLE\" \"\$prompt\" \"\" $menu_list - ENCRYPTION=$( eval $DIALOG \ - --title \"\$DIALOG_TITLE\" \ - --backtitle \"\$DIALOG_BACKTITLE\" \ - --menu \"\$prompt\" \ - $height $width $rows \ - $menu_list \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) || exit 1 - SCANSSID=1 - break - ;; - $DIALOG_EXTRA) # Rescan - ;; - esac -done - -[ "$ENCRYPTION" ] || ENCRYPTION=$( echo "$NETWORKS" | - awk -F '\t' "/^\"$NETWORK\"\t/ { print \$2 }" ) - -if echo "$ENCRYPTION" | grep -q PSK; then - PASS=$( $DIALOG \ - --title "WPA Setup" \ - --backtitle "$DIALOG_BACKTITLE" \ - --insecure \ - --mixedform "" \ - 0 0 0 \ - "SSID" 1 0 "$NETWORK" 1 12 0 0 2 \ - "Password" 2 0 "" 2 12 15 63 1 \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) || exec "$0" "$@" - awk 'sub(/^\\/,"")||1' \ - >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF - network={ - \ ssid="$NETWORK" - \ scan_ssid=$SCANSSID - \ psk="$PASS" - \ priority=5 - } - EOF -elif echo "$ENCRYPTION" | grep -q EAP; then - USERPASS=$( $DIALOG \ - --title "WPA-Enterprise Setup" \ - --backtitle "$DIALOG_BACKTITLE" \ - --insecure \ - --mixedform "" \ - 0 0 0 \ - "SSID" 1 0 "$NETWORK" 1 12 0 0 2 \ - "Username" 2 0 "" 2 12 25 63 0 \ - "Password" 3 0 "" 3 12 25 63 1 \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) || exec "$0" "$@" - awk 'sub(/^\\/,"")||1' \ - >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF - network={ - \ ssid="$NETWORK" - \ scan_ssid=$SCANSSID - \ key_mgmt=WPA-EAP$( - echo "$USERPASS" | awk ' - NR == 1 { printf "\n\tidentity=\"%s\"", $1 } - NR == 2 { printf "\n\tpassword=\"%s\"", $1 } - ' ) - \ priority=5 - } - EOF -elif echo "$ENCRYPTION" | grep -q WEP; then - WEPKEY=$( $DIALOG \ - --title "WEP Setup" \ - --backtitle "$DIALOG_BACKTITLE" \ - --insecure \ - --mixedform "" \ - 0 0 0 \ - "SSID" 1 0 "$NETWORK" 1 12 0 0 2 \ - "WEP Key 0" 2 0 "" 2 12 15 0 1 \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) || exec "$0" "$@" - awk 'sub(/^\\/,"")||1' \ - >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF - network={ - \ ssid="$NETWORK" - \ scan_ssid=$SCANSSID - \ key_mgmt=NONE - \ wep_key0="$WEPKEY" - \ wep_tx_keyidx=0 - \ priority=5 - } - EOF -else # Open - awk 'sub(/^\\/,"")||1' \ - >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<-EOF - network={ - \ ssid="$NETWORK" - \ scan_ssid=$SCANSSID - \ key_mgmt=NONE - \ priority=5 - } - EOF -fi - -# Connect to any open networks policy -cat >> "$BSDINSTALL_TMPETC/wpa_supplicant.conf" <<EOF -network={ - priority=0 - key_mgmt=NONE -} -EOF - -# Bring up new network -[ "$BSDINSTALL_CONFIGCURRENT" ] && - f_eval_catch -d wlanconfig wpa_cli "wpa_cli reconfigure" - -exit $SUCCESS - -################################################################################ -# END -################################################################################ diff --git a/bsdinstall/scripts/zfsboot b/bsdinstall/scripts/zfsboot deleted file mode 100755 index 45c8b001c393..000000000000 --- a/bsdinstall/scripts/zfsboot +++ /dev/null @@ -1,1814 +0,0 @@ -#!/bin/sh -#- -# Copyright (c) 2013-2016 Allan Jude -# Copyright (c) 2013-2018 Devin Teske -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# -############################################################ INCLUDES - -BSDCFG_SHARE="/usr/share/bsdconfig" -. $BSDCFG_SHARE/common.subr || exit 1 -f_dprintf "%s: loading includes..." "$0" -f_include $BSDCFG_SHARE/device.subr -f_include $BSDCFG_SHARE/dialog.subr -f_include $BSDCFG_SHARE/password/password.subr -f_include $BSDCFG_SHARE/variable.subr - -############################################################ CONFIGURATION - -# -# Default name of the boot-pool -# -: ${ZFSBOOT_POOL_NAME:=zroot} - -# -# Default pool size is optional -# -: ${ZFSBOOT_POOL_SIZE=} - -# -# Default options to use when creating zroot pool -# -: ${ZFSBOOT_POOL_CREATE_OPTIONS:=-O compress=lz4 -O atime=off} - -# -# Default name for the boot environment parent dataset -# -: ${ZFSBOOT_BEROOT_NAME:=ROOT} - -# -# Default name for the primary boot environment -# -: ${ZFSBOOT_BOOTFS_NAME:=default} - -# -# Default Virtual Device (vdev) type to create -# -: ${ZFSBOOT_VDEV_TYPE:=stripe} - -# -# Should we use sysctl(8) vfs.zfs.min_auto_ashift=12 to force 4K sectors? -# -: ${ZFSBOOT_FORCE_4K_SECTORS:=1} - -# -# Should we use geli(8) to encrypt the drives? -# NB: Automatically enables ZFSBOOT_BOOT_POOL -# -: ${ZFSBOOT_GELI_ENCRYPTION=} - -# -# Default path to the geli(8) keyfile used in drive encryption -# -: ${ZFSBOOT_GELI_KEY_FILE:=/boot/encryption.key} - -# -# Create a separate boot pool? -# NB: Automatically set when using geli(8) or MBR -# -: ${ZFSBOOT_BOOT_POOL=} - -# -# Options to use when creating separate boot pool (if any) -# -: ${ZFSBOOT_BOOT_POOL_CREATE_OPTIONS:=} - -# -# Default name for boot pool when enabled (e.g., geli(8) or MBR) -# -: ${ZFSBOOT_BOOT_POOL_NAME:=bootpool} - -# -# Default size for boot pool when enabled (e.g., geli(8) or MBR) -# -: ${ZFSBOOT_BOOT_POOL_SIZE:=2g} - -# -# Default disks to use (always empty unless being scripted) -# -: ${ZFSBOOT_DISKS:=} - -# -# Default partitioning scheme to use on disks -# -: ${ZFSBOOT_PARTITION_SCHEME:=} - -# -# Default boot type to use on disks -# -: ${ZFSBOOT_BOOT_TYPE:=} - -# -# How much swap to put on each block device in the boot zpool -# NOTE: Value passed to gpart(8); which supports SI unit suffixes. -# -: ${ZFSBOOT_SWAP_SIZE:=2g} - -# -# Should we use geli(8) to encrypt the swap? -# -: ${ZFSBOOT_SWAP_ENCRYPTION=} - -# -# Should we use gmirror(8) to mirror the swap? -# -: ${ZFSBOOT_SWAP_MIRROR=} - -# -# Default ZFS datasets for root zpool -# -# NOTE: Requires /tmp, /var/tmp, /$ZFSBOOT_BOOTFS_NAME/$ZFSBOOT_BOOTFS_NAME -# NOTE: Anything after pound/hash character [#] is ignored as a comment. -# -f_isset ZFSBOOT_DATASETS || ZFSBOOT_DATASETS=" - # DATASET OPTIONS (comma or space separated; or both) - - # Boot Environment [BE] root and default boot dataset - /$ZFSBOOT_BEROOT_NAME mountpoint=none - /$ZFSBOOT_BEROOT_NAME/$ZFSBOOT_BOOTFS_NAME mountpoint=/ - - # Compress /tmp, allow exec but not setuid - /tmp mountpoint=/tmp,exec=on,setuid=off - - # Don't mount /usr so that 'base' files go to the BEROOT - /usr mountpoint=/usr,canmount=off - - # Home directories separated so they are common to all BEs - /usr/home # NB: /home is a symlink to /usr/home - - # Ports tree - /usr/ports setuid=off - - # Source tree (compressed) - /usr/src - - # Create /var and friends - /var mountpoint=/var,canmount=off - /var/audit exec=off,setuid=off - /var/crash exec=off,setuid=off - /var/log exec=off,setuid=off - /var/mail atime=on - /var/tmp setuid=off -" # END-QUOTE - -# -# If interactive and the user has not explicitly chosen a vdev type or disks, -# make the user confirm scripted/default choices when proceeding to install. -# -: ${ZFSBOOT_CONFIRM_LAYOUT:=1} - -############################################################ GLOBALS - -# -# Format of a line in printf(1) syntax to add to fstab(5) -# -FSTAB_FMT="%s\t\t%s\t%s\t%s\t\t%s\t%s\n" - -# -# Command strings for various tasks -# -COPY='cp "%s" "%s"' -CHMOD_MODE='chmod %s "%s"' -DD_WITH_OPTIONS='dd if="%s" of="%s" %s' -ECHO_APPEND='echo "%s" >> "%s"' -ECHO_OVERWRITE='echo "%s" > "%s"' -GELI_ATTACH='geli attach -j - -k "%s" "%s"' -GELI_ATTACH_NOKEY='geli attach -j - "%s"' -GELI_DETACH_F='geli detach -f "%s"' -GELI_PASSWORD_INIT='geli init -b -B "%s" -e %s -J - -K "%s" -l 256 -s 4096 "%s"' -GELI_PASSWORD_GELIBOOT_INIT='geli init -bg -e %s -J - -l 256 -s 4096 "%s"' -GPART_ADD_ALIGN='gpart add %s -t %s "%s"' -GPART_ADD_ALIGN_INDEX='gpart add %s -i %s -t %s "%s"' -GPART_ADD_ALIGN_INDEX_WITH_SIZE='gpart add %s -i %s -t %s -s %s "%s"' -GPART_ADD_ALIGN_LABEL='gpart add %s -l %s -t %s "%s"' -GPART_ADD_ALIGN_LABEL_WITH_SIZE='gpart add %s -l %s -t %s -s %s "%s"' -GPART_BOOTCODE='gpart bootcode -b "%s" "%s"' -GPART_BOOTCODE_PART='gpart bootcode -b "%s" -p "%s" -i %s "%s"' -GPART_BOOTCODE_PARTONLY='gpart bootcode -p "%s" -i %s "%s"' -GPART_CREATE='gpart create -s %s "%s"' -GPART_DESTROY_F='gpart destroy -F "%s"' -GPART_SET_ACTIVE='gpart set -a active -i %s "%s"' -GPART_SET_LENOVOFIX='gpart set -a lenovofix "%s"' -GPART_SET_PMBR_ACTIVE='gpart set -a active "%s"' -GRAID_DELETE='graid delete "%s"' -KLDLOAD='kldload %s' -LN_SF='ln -sf "%s" "%s"' -MKDIR_P='mkdir -p "%s"' -MOUNT_TYPE='mount -t %s "%s" "%s"' -NEWFS_ESP='newfs_msdos "%s"' -PRINTF_CONF="printf '%s=\"%%s\"\\\n' %s >> \"%s\"" -PRINTF_FSTAB='printf "$FSTAB_FMT" "%s" "%s" "%s" "%s" "%s" "%s" >> "%s"' -SHELL_TRUNCATE=':> "%s"' -SWAP_GMIRROR_LABEL='gmirror label swap %s' -SYSCTL_ZFS_MIN_ASHIFT_12='sysctl vfs.zfs.min_auto_ashift=12' -UMOUNT='umount "%s"' -ZFS_CREATE_WITH_OPTIONS='zfs create %s "%s"' -ZFS_MOUNT='zfs mount "%s"' -ZFS_SET='zfs set "%s" "%s"' -ZFS_UNMOUNT='zfs unmount "%s"' -ZPOOL_CREATE_WITH_OPTIONS='zpool create %s "%s" %s %s' -ZPOOL_DESTROY='zpool destroy "%s"' -ZPOOL_EXPORT='zpool export "%s"' -ZPOOL_EXPORT_F='zpool export -f "%s"' -ZPOOL_IMPORT_WITH_OPTIONS='zpool import %s "%s"' -ZPOOL_LABELCLEAR_F='zpool labelclear -f "%s"' -ZPOOL_SET='zpool set %s "%s"' - -# -# Strings that should be moved to an i18n file and loaded with f_include_lang() -# -hline_alnum_arrows_punc_tab_enter="Use alnum, arrows, punctuation, TAB or ENTER" -hline_arrows_space_tab_enter="Use arrows, SPACE, TAB or ENTER" -hline_arrows_tab_enter="Press arrows, TAB or ENTER" -msg_an_unknown_error_occurred="An unknown error occurred" -msg_back="Back" -msg_cancel="Cancel" -msg_change_selection="Change Selection" -msg_configure_options="Configure Options:" -msg_detailed_disk_info="gpart(8) show %s:\n%s\n\ncamcontrol(8) inquiry %s:\n%s\n\n\ncamcontrol(8) identify %s:\n%s\n" -msg_disk_info="Disk Info" -msg_disk_info_help="Get detailed information on disk device(s)" -msg_disk_plural="disks" -msg_disk_singular="disk" -msg_encrypt_disks="Encrypt Disks?" -msg_encrypt_disks_help="Use geli(8) to encrypt all data partitions" -msg_error="Error" -msg_force_4k_sectors="Force 4K Sectors?" -msg_force_4k_sectors_help="Align partitions to 4K sector boundries and set vfs.zfs.min_auto_ashift=12" -msg_freebsd_installer="FreeBSD Installer" -msg_geli_password="Enter a strong passphrase, used to protect your encryption keys. You will be required to enter this passphrase each time the system is booted" -msg_geli_setup="Initializing encryption on selected disks,\n this will take several seconds per disk" -msg_install="Install" -msg_install_desc="Proceed with Installation" -msg_install_help="Create ZFS boot pool with displayed options" -msg_invalid_boot_pool_size="Invalid boot pool size \`%s'" -msg_invalid_disk_argument="Invalid disk argument \`%s'" -msg_invalid_index_argument="Invalid index argument \`%s'" -msg_invalid_pool_size="Invalid pool size \`%s'" -msg_invalid_swap_size="Invalid swap size \`%s'" -msg_invalid_virtual_device_type="Invalid Virtual Device type \`%s'" -msg_last_chance_are_you_sure="Last Chance! Are you sure you want to destroy\nthe current contents of the following disks:\n\n %s" -msg_last_chance_are_you_sure_color='\\ZrLast Chance!\\ZR Are you \\Z1sure\\Zn you want to \\Zr\\Z1destroy\\Zn\nthe current contents of the following disks:\n\n %s' -msg_mirror_desc="Mirror - n-Way Mirroring" -msg_mirror_help="[2+ Disks] Mirroring provides the best performance, but the least storage" -msg_missing_disk_arguments="missing disk arguments" -msg_missing_one_or_more_scripted_disks="Missing one or more scripted disks!" -msg_no="NO" -msg_no_disks_present_to_configure="No disk(s) present to configure" -msg_no_disks_selected="No disks selected." -msg_not_enough_disks_selected="Not enough disks selected. (%u < %u minimum)" -msg_null_disk_argument="NULL disk argument" -msg_null_index_argument="NULL index argument" -msg_null_poolname="NULL poolname" -msg_odd_disk_selected="An even number of disks must be selected to create a RAID 1+0. (%u selected)" -msg_ok="OK" -msg_partition_scheme="Partition Scheme" -msg_partition_scheme_help="Select partitioning scheme. GPT is recommended." -msg_please_enter_a_name_for_your_zpool="Please enter a name for your zpool:" -msg_please_enter_amount_of_swap_space="Please enter amount of swap space (SI-Unit suffixes\nrecommended; e.g., \`2g' for 2 Gigabytes):" -msg_please_select_one_or_more_disks="Please select one or more disks to create a zpool:" -msg_pool_name="Pool Name" -msg_pool_name_cannot_be_empty="Pool name cannot be empty." -msg_pool_name_help="Customize the name of the zpool to be created (Required)" -msg_pool_type_disks="Pool Type/Disks:" -msg_pool_type_disks_help="Choose type of ZFS Virtual Device and disks to use (Required)" -msg_processing_selection="Processing selection..." -msg_raid10_desc="RAID 1+0 - n x 2-Way Mirrors" -msg_raid10_help="[4+ Disks] Striped Mirrors provides the best performance, but the least storage" -msg_raidz1_desc="RAID-Z1 - Single Redundant RAID" -msg_raidz1_help="[3+ Disks] Withstand failure of 1 disk. Recommended for: 3, 5 or 9 disks" -msg_raidz2_desc="RAID-Z2 - Double Redundant RAID" -msg_raidz2_help="[4+ Disks] Withstand failure of 2 disks. Recommended for: 4, 6 or 10 disks" -msg_raidz3_desc="RAID-Z3 - Triple Redundant RAID" -msg_raidz3_help="[5+ Disks] Withstand failure of 3 disks. Recommended for: 5, 7 or 11 disks" -msg_rescan_devices="Rescan Devices" -msg_rescan_devices_help="Scan for device changes" -msg_select="Select" -msg_select_a_disk_device="Select a disk device" -msg_select_virtual_device_type="Select Virtual Device type:" -msg_stripe_desc="Stripe - No Redundancy" -msg_stripe_help="[1+ Disks] Striping provides maximum storage but no redundancy" -msg_swap_encrypt="Encrypt Swap?" -msg_swap_encrypt_help="Encrypt swap partitions with temporary keys, discarded on reboot" -msg_swap_invalid="The selected swap size (%s) is invalid. Enter a number optionally followed by units. Example: 2G" -msg_swap_mirror="Mirror Swap?" -msg_swap_mirror_help="Mirror swap partitions for redundancy, breaks crash dumps" -msg_swap_size="Swap Size" -msg_swap_size_help="Customize how much swap space is allocated to each selected disk" -msg_swap_toosmall="The selected swap size (%s) is to small. Please enter a value greater than 100MB or enter 0 for no swap" -msg_these_disks_are_too_small="These disks are smaller than the amount of requested\nswap (%s) and/or geli(8) (%s) partitions, which would\ntake 100%% or more of each of the following selected disks:\n\n %s\n\nRecommend changing partition size(s) and/or selecting a\ndifferent set of disks." -msg_unable_to_get_disk_capacity="Unable to get disk capacity of \`%s'" -msg_unsupported_partition_scheme="%s is an unsupported partition scheme" -msg_user_cancelled="User Cancelled." -msg_yes="YES" -msg_zfs_configuration="ZFS Configuration" - -############################################################ FUNCTIONS - -# dialog_menu_main -# -# Display the dialog(1)-based application main menu. -# -dialog_menu_main() -{ - local title="$DIALOG_TITLE" - local btitle="$DIALOG_BACKTITLE" - local prompt="$msg_configure_options" - local force4k="$msg_no" - local usegeli="$msg_no" - local swapgeli="$msg_no" - local swapmirror="$msg_no" - [ "$ZFSBOOT_FORCE_4K_SECTORS" ] && force4k="$msg_yes" - [ "$ZFSBOOT_GELI_ENCRYPTION" ] && usegeli="$msg_yes" - [ "$ZFSBOOT_SWAP_ENCRYPTION" ] && swapgeli="$msg_yes" - [ "$ZFSBOOT_SWAP_MIRROR" ] && swapmirror="$msg_yes" - local disks n disks_grammar - f_count n $ZFSBOOT_DISKS - { [ $n -eq 1 ] && disks_grammar=$msg_disk_singular; } || - disks_grammar=$msg_disk_plural # grammar - local menu_list=" - '>>> $msg_install' '$msg_install_desc' - '$msg_install_help' - 'T $msg_pool_type_disks' - '$ZFSBOOT_VDEV_TYPE: $n $disks_grammar' - '$msg_pool_type_disks_help' - '- $msg_rescan_devices' '*' - '$msg_rescan_devices_help' - '- $msg_disk_info' '*' - '$msg_disk_info_help' - 'N $msg_pool_name' '$ZFSBOOT_POOL_NAME' - '$msg_pool_name_help' - '4 $msg_force_4k_sectors' - '$force4k' - '$msg_force_4k_sectors_help' - 'E $msg_encrypt_disks' '$usegeli' - '$msg_encrypt_disks_help' - 'P $msg_partition_scheme' - '$ZFSBOOT_PARTITION_SCHEME ($ZFSBOOT_BOOT_TYPE)' - '$msg_partition_scheme_help' - 'S $msg_swap_size' '$ZFSBOOT_SWAP_SIZE' - '$msg_swap_size_help' - 'M $msg_swap_mirror' '$swapmirror' - '$msg_swap_mirror_help' - 'W $msg_swap_encrypt' '$swapgeli' - '$msg_swap_encrypt_help' - " # END-QUOTE - local defaultitem= # Calculated below - local hline="$hline_alnum_arrows_punc_tab_enter" - - local height width rows - eval f_dialog_menu_with_help_size height width rows \ - \"\$title\" \"\$btitle\" \"\$prompt\" \"\$hline\" $menu_list - - # Obtain default-item from previously stored selection - f_dialog_default_fetch defaultitem - - local menu_choice - menu_choice=$( eval $DIALOG \ - --title \"\$title\" \ - --backtitle \"\$btitle\" \ - --hline \"\$hline\" \ - --item-help \ - --ok-label \"\$msg_select\" \ - --cancel-label \"\$msg_cancel\" \ - --default-item \"\$defaultitem\" \ - --menu \"\$prompt\" \ - $height $width $rows \ - $menu_list \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) - local retval=$? - f_dialog_data_sanitize menu_choice - f_dialog_menutag_store "$menu_choice" - - # Only update default-item on success - [ $retval -eq $DIALOG_OK ] && f_dialog_default_store "$menu_choice" - - return $retval -} - -# dialog_last_chance $disks ... -# -# Display a list of the disks that the user is about to destroy. The default -# action is to return error status unless the user explicitly (non-default) -# selects "Yes" from the noyes dialog. -# -dialog_last_chance() -{ - local title="$DIALOG_TITLE" - local btitle="$DIALOG_BACKTITLE" - local prompt # Calculated below - local hline="$hline_arrows_tab_enter" - - local height=8 width=50 prefix=" " - local plen=${#prefix} list= line= - local max_width=$(( $width - 3 - $plen )) - - local yes no defaultno extra_args format - if [ "$USE_XDIALOG" ]; then - yes=ok no=cancel defaultno=default-no - extra_args="--wrap --left" - format="$msg_last_chance_are_you_sure" - else - yes=yes no=no defaultno=defaultno - extra_args="--colors --cr-wrap" - format="$msg_last_chance_are_you_sure_color" - fi - - local disk line_width - for disk in $*; do - if [ "$line" ]; then - line_width=${#line} - else - line_width=$plen - fi - line_width=$(( $line_width + 1 + ${#disk} )) - # Add newline before disk if it would exceed max_width - if [ $line_width -gt $max_width ]; then - list="$list$line\n" - line="$prefix" - height=$(( $height + 1 )) - fi - # Add the disk to the list - line="$line $disk" - done - # Append the left-overs - if [ "${line#$prefix}" ]; then - list="$list$line" - height=$(( $height + 1 )) - fi - - # Add height for Xdialog(1) - [ "$USE_XDIALOG" ] && height=$(( $height + $height / 5 + 3 )) - - prompt=$( printf "$format" "$list" ) - f_dprintf "%s: Last Chance!" "$0" - $DIALOG \ - --title "$title" \ - --backtitle "$btitle" \ - --hline "$hline" \ - --$defaultno \ - --$yes-label "$msg_yes" \ - --$no-label "$msg_no" \ - $extra_args \ - --yesno "$prompt" $height $width -} - -# dialog_menu_layout -# -# Configure Virtual Device type and disks to use for the ZFS boot pool. User -# must select enough disks to satisfy the chosen vdev type. -# -dialog_menu_layout() -{ - local funcname=dialog_menu_layout - local title="$DIALOG_TITLE" - local btitle="$DIALOG_BACKTITLE" - local vdev_prompt="$msg_select_virtual_device_type" - local disk_prompt="$msg_please_select_one_or_more_disks" - local vdev_menu_list=" - 'stripe' '$msg_stripe_desc' '$msg_stripe_help' - 'mirror' '$msg_mirror_desc' '$msg_mirror_help' - 'raid10' '$msg_raid10_desc' '$msg_raid10_help' - 'raidz1' '$msg_raidz1_desc' '$msg_raidz1_help' - 'raidz2' '$msg_raidz2_desc' '$msg_raidz2_help' - 'raidz3' '$msg_raidz3_desc' '$msg_raidz3_help' - " # END-QUOTE - local disk_check_list= # Calculated below - local vdev_hline="$hline_arrows_tab_enter" - local disk_hline="$hline_arrows_space_tab_enter" - - # Warn the user if vdev type is not valid - case "$ZFSBOOT_VDEV_TYPE" in - stripe|mirror|raid10|raidz1|raidz2|raidz3) : known good ;; - *) - f_dprintf "%s: Invalid virtual device type \`%s'" \ - $funcname "$ZFSBOOT_VDEV_TYPE" - f_show_err "$msg_invalid_virtual_device_type" \ - "$ZFSBOOT_VDEV_TYPE" - f_interactive || return $FAILURE - esac - - # Calculate size of vdev menu once only - local vheight vwidth vrows - eval f_dialog_menu_with_help_size vheight vwidth vrows \ - \"\$title\" \"\$btitle\" \"\$vdev_prompt\" \"\$vdev_hline\" \ - $vdev_menu_list - - # Get a list of probed disk devices - local disks= - debug= f_device_find "" $DEVICE_TYPE_DISK disks - - # Prune out mounted md(4) devices that may be part of the boot process - local disk name new_list= - for disk in $disks; do - debug= $disk get name name - case "$name" in - md[0-9]*) f_mounted -b "/dev/$name" && continue ;; - esac - new_list="$new_list $disk" - done - disks="${new_list# }" - - # Debugging - if [ "$debug" ]; then - local disk_names= - for disk in $disks; do - debug= $disk get name name - disk_names="$disk_names $name" - done - f_dprintf "$funcname: disks=[%s]" "${disk_names# }" - fi - - if [ ! "$disks" ]; then - f_dprintf "No disk(s) present to configure" - f_show_err "$msg_no_disks_present_to_configure" - return $FAILURE - fi - - # Lets sort the disks array to be more user friendly - f_device_sort_by name disks disks - - # - # Operate in a loop so we can (if interactive) repeat if not enough - # disks are selected to satisfy the chosen vdev type or user wants to - # back-up to the previous menu. - # - local vardisk ndisks onoff selections vdev_choice breakout device - local valid_disks all_valid want_disks desc height width rows - while :; do - # - # Confirm the vdev type that was selected - # - if f_interactive && [ "$ZFSBOOT_CONFIRM_LAYOUT" ]; then - vdev_choice=$( eval $DIALOG \ - --title \"\$title\" \ - --backtitle \"\$btitle\" \ - --hline \"\$vdev_hline\" \ - --ok-label \"\$msg_ok\" \ - --cancel-label \"\$msg_cancel\" \ - --item-help \ - --default-item \"\$ZFSBOOT_VDEV_TYPE\" \ - --menu \"\$vdev_prompt\" \ - $vheight $vwidth $vrows \ - $vdev_menu_list \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) || return $? - # Exit if user pressed ESC or chose Cancel/No - f_dialog_data_sanitize vdev_choice - - ZFSBOOT_VDEV_TYPE="$vdev_choice" - f_dprintf "$funcname: ZFSBOOT_VDEV_TYPE=[%s]" \ - "$ZFSBOOT_VDEV_TYPE" - fi - - # Determine the number of disks needed for this vdev type - want_disks=0 - case "$ZFSBOOT_VDEV_TYPE" in - stripe) want_disks=1 ;; - mirror) want_disks=2 ;; - raid10) want_disks=4 ;; - raidz1) want_disks=3 ;; - raidz2) want_disks=4 ;; - raidz3) want_disks=5 ;; - esac - - # - # Warn the user if any scripted disks are invalid - # - valid_disks= all_valid=${ZFSBOOT_DISKS:+1} # optimism - for disk in $ZFSBOOT_DISKS; do - if debug= f_device_find -1 \ - $disk $DEVICE_TYPE_DISK device - then - valid_disks="$valid_disks $disk" - continue - fi - f_dprintf "$funcname: \`%s' is not a real disk" "$disk" - all_valid= - done - if [ ! "$all_valid" ]; then - if [ "$ZFSBOOT_DISKS" ]; then - f_show_err \ - "$msg_missing_one_or_more_scripted_disks" - else - f_dprintf "No disks selected." - f_interactive || - f_show_err "$msg_no_disks_selected" - fi - f_interactive || return $FAILURE - fi - ZFSBOOT_DISKS="${valid_disks# }" - - # - # Short-circuit if we're running non-interactively - # - if ! f_interactive || [ ! "$ZFSBOOT_CONFIRM_LAYOUT" ]; then - f_count ndisks $ZFSBOOT_DISKS - [ $ndisks -ge $want_disks ] && break # to success - - # Not enough disks selected - f_dprintf "$funcname: %s: %s (%u < %u minimum)" \ - "$ZFSBOOT_VDEV_TYPE" \ - "Not enough disks selected." \ - $ndisks $want_disks - f_interactive || return $FAILURE - msg_yes="$msg_change_selection" msg_no="$msg_cancel" \ - f_yesno "%s: $msg_not_enough_disks_selected" \ - "$ZFSBOOT_VDEV_TYPE" $ndisks $want_disks || - return $FAILURE - fi - - # - # Confirm the disks that were selected - # Loop until the user cancels or selects enough disks - # - breakout= - while :; do - # Loop over list of available disks, resetting state - for disk in $disks; do - f_isset _${disk}_status && _${disk}_status= - done - - # Loop over list of selected disks and create temporary - # locals to map statuses onto up-to-date list of disks - for disk in $ZFSBOOT_DISKS; do - debug= f_device_find -1 \ - $disk $DEVICE_TYPE_DISK disk - f_isset _${disk}_status || - local _${disk}_status - _${disk}_status=on - done - - # Create the checklist menu of discovered disk devices - disk_check_list= - for disk in $disks; do - desc= - $disk get name name - $disk get desc desc - f_shell_escape "$desc" desc - f_getvar _${disk}_status:-off onoff - disk_check_list="$disk_check_list - $name '$desc' $onoff" - done - - eval f_dialog_checklist_size height width rows \ - \"\$title\" \"\$btitle\" \"\$prompt\" \ - \"\$hline\" $disk_check_list - - selections=$( eval $DIALOG \ - --title \"\$DIALOG_TITLE\" \ - --backtitle \"\$DIALOG_BACKTITLE\" \ - --separate-output \ - --hline \"\$hline\" \ - --ok-label \"\$msg_ok\" \ - --cancel-label \"\$msg_back\" \ - --checklist \"\$prompt\" \ - $height $width $rows \ - $disk_check_list \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - ) || break - # Loop if user pressed ESC or chose Cancel/No - f_dialog_data_sanitize selections - - ZFSBOOT_DISKS="$selections" - f_dprintf "$funcname: ZFSBOOT_DISKS=[%s]" \ - "$ZFSBOOT_DISKS" - - f_count ndisks $ZFSBOOT_DISKS - - if [ "$ZFSBOOT_VDEV_TYPE" == "raid10" ] && - [ $(( $ndisks % 2 )) -ne 0 ]; then - f_dprintf "$funcname: %s: %s (%u %% 2 = %u)" \ - "$ZFSBOOT_VDEV_TYPE" \ - "Number of disks not even:" \ - $ndisks $(( $ndisks % 2 )) - msg_yes="$msg_change_selection" \ - msg_no="$msg_cancel" \ - f_yesno "%s: $msg_odd_disk_selected" \ - "$ZFSBOOT_VDEV_TYPE" $ndisks || - break - continue - fi - - [ $ndisks -ge $want_disks ] && - breakout=break && break - - # Not enough disks selected - f_dprintf "$funcname: %s: %s (%u < %u minimum)" \ - "$ZFSBOOT_VDEV_TYPE" \ - "Not enough disks selected." \ - $ndisks $want_disks - msg_yes="$msg_change_selection" msg_no="$msg_cancel" \ - f_yesno "%s: $msg_not_enough_disks_selected" \ - "$ZFSBOOT_VDEV_TYPE" $ndisks $want_disks || - break - done - [ "$breakout" = "break" ] && break - [ "$ZFSBOOT_CONFIRM_LAYOUT" ] || return $FAILURE - done - - return $DIALOG_OK -} - -# zfs_create_diskpart $disk $index -# -# For each block device to be used in the zpool, rather than just create the -# zpool with the raw block devices (e.g., da0, da1, etc.) we create partitions -# so we can have some real swap. This also provides wiggle room incase your -# replacement drivers do not have the exact same sector counts. -# -# NOTE: $swapsize and $bootsize should be defined by the calling function. -# NOTE: Sets $bootpart and $targetpart for the calling function. -# -zfs_create_diskpart() -{ - local funcname=zfs_create_diskpart - local disk="$1" index="$2" - - # Check arguments - if [ ! "$disk" ]; then - f_dprintf "$funcname: NULL disk argument" - msg_error="$msg_error: $funcname" \ - f_show_err "$msg_null_disk_argument" - return $FAILURE - fi - if [ "${disk#*[$IFS]}" != "$disk" ]; then - f_dprintf "$funcname: Invalid disk argument \`%s'" "$disk" - msg_error="$msg_error: $funcname" \ - f_show_err "$msg_invalid_disk_argument" "$disk" - return $FAILURE - fi - if [ ! "$index" ]; then - f_dprintf "$funcname: NULL index argument" - msg_error="$msg_error: $funcname" \ - f_show_err "$msg_null_index_argument" - return $FAILURE - fi - if ! f_isinteger "$index"; then - f_dprintf "$funcname: Invalid index argument \`%s'" "$index" - msg_error="$msg_error: $funcname" \ - f_show_err "$msg_invalid_index_argument" "$index" - return $FAILURE - fi - f_dprintf "$funcname: disk=[%s] index=[%s]" "$disk" "$index" - - # Check for unknown partition scheme before proceeding further - case "$ZFSBOOT_PARTITION_SCHEME" in - ""|MBR|GPT*) : known good ;; - *) - f_dprintf "$funcname: %s is an unsupported partition scheme" \ - "$ZFSBOOT_PARTITION_SCHEME" - msg_error="$msg_error: $funcname" f_show_err \ - "$msg_unsupported_partition_scheme" \ - "$ZFSBOOT_PARTITION_SCHEME" - return $FAILURE - esac - - # - # Destroy whatever partition layout is currently on disk. - # NOTE: `-F' required to destroy if partitions still exist. - # NOTE: Failure is ok here, blank disk will have nothing to destroy. - # - f_dprintf "$funcname: Exporting ZFS pools..." - zpool list -Ho name | while read z_name; do - f_eval_catch -d $funcname zpool "$ZPOOL_EXPORT_F" $z_name - done - f_dprintf "$funcname: Detaching all GELI providers..." - geli status | tail -n +2 | while read g_name g_status g_component; do - f_eval_catch -d $funcname geli "$GELI_DETACH_F" $g_name - done - f_dprintf "$funcname: Destroying all data/layouts on \`%s'..." "$disk" - f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" $disk - f_eval_catch -d $funcname graid "$GRAID_DELETE" $disk - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" /dev/$disk - - # Make doubly-sure backup GPT is destroyed - f_eval_catch -d $funcname gpart "$GPART_CREATE" gpt $disk - f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" $disk - - # - # Lay down the desired type of partition scheme - # - local setsize mbrindex align_small align_big - # - # If user has requested 4 K alignment, add these params to the - # gpart add calls. With GPT, we align large partitions to 1 M for - # improved performance on SSDs. MBR does not always play well with gaps - # between partitions, so all alignment is only 4k for that case. - # With MBR, we align the BSD partition that contains the MBR, otherwise - # the system fails to boot. - # - if [ "$ZFSBOOT_FORCE_4K_SECTORS" ]; then - align_small="-a 4k" - align_big="-a 1m" - fi - - case "$ZFSBOOT_PARTITION_SCHEME" in - ""|GPT*) f_dprintf "$funcname: Creating GPT layout..." - # - # 1. Create GPT layout using labels - # - f_eval_catch $funcname gpart "$GPART_CREATE" gpt $disk || - return $FAILURE - - # - # Apply workarounds if requested by the user - # - if [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT + Lenovo Fix" ]; then - f_eval_catch $funcname gpart "$GPART_SET_LENOVOFIX" \ - $disk || return $FAILURE - elif [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT + Active" ]; then - f_eval_catch $funcname gpart "$GPART_SET_PMBR_ACTIVE" \ - $disk || return $FAILURE - fi - - # - # 2. Add small freebsd-boot and/or efi partition - # - if [ "$ZFSBOOT_BOOT_TYPE" = "UEFI" -o \ - "$ZFSBOOT_BOOT_TYPE" = "BIOS+UEFI" ] - then - f_eval_catch -k justaddedpart $funcname gpart \ - "$GPART_ADD_ALIGN_LABEL_WITH_SIZE" \ - "$align_small" efiboot$index efi 260M \ - $disk || return $FAILURE - - # We'll configure the ESP in bootconfig - if [ -z "$efibootpart" ]; then - efibootpart="/dev/$(echo $justaddedpart | cut -f 1 -d ' ')" - f_dprintf "$funcname: configuring ESP at [%s]" \ - "${efibootpart}" - - f_eval_catch $funcname newfs_msdos "$NEWFS_ESP"\ - "$efibootpart" \ - || return $FAILURE - f_eval_catch $funcname printf "$PRINTF_FSTAB" \ - $efibootpart /boot/efi msdosfs \ - rw 2 2 "$BSDINSTALL_TMPETC/fstab" \ - || return $FAILURE - fi - fi - - if [ "$ZFSBOOT_BOOT_TYPE" = "BIOS" -o \ - "$ZFSBOOT_BOOT_TYPE" = "BIOS+UEFI" ] - then - f_eval_catch $funcname gpart \ - "$GPART_ADD_ALIGN_LABEL_WITH_SIZE" \ - "$align_small" gptboot$index \ - freebsd-boot 512k $disk || return $FAILURE - if [ "$ZFSBOOT_BOOT_TYPE" = "BIOS" ]; then - f_eval_catch $funcname gpart \ - "$GPART_BOOTCODE_PART" \ - /boot/pmbr /boot/gptzfsboot 1 \ - $disk || return $FAILURE - else - f_eval_catch $funcname gpart \ - "$GPART_BOOTCODE_PART" \ - /boot/pmbr /boot/gptzfsboot 2 \ - $disk || return $FAILURE - fi - fi - - # NB: zpool will use the `zfs#' GPT labels - if [ "$ZFSBOOT_BOOT_TYPE" = "BIOS+UEFI" ]; then - if [ "$ZFSBOOT_BOOT_POOL" ]; then - bootpart=p3 swappart=p4 targetpart=p4 - [ ${swapsize:-0} -gt 0 ] && targetpart=p5 - else - # Bootpart unused - bootpart=p3 swappart=p3 targetpart=p3 - [ ${swapsize:-0} -gt 0 ] && targetpart=p4 - fi - else - if [ "$ZFSBOOT_BOOT_POOL" ]; then - bootpart=p2 swappart=p3 targetpart=p3 - [ ${swapsize:-0} -gt 0 ] && targetpart=p4 - else - # Bootpart unused - bootpart=p2 swappart=p2 targetpart=p2 - [ ${swapsize:-0} -gt 0 ] && targetpart=p3 - fi - fi - - # - # Prepare boot pool if enabled (e.g., for geli(8)) - # - if [ "$ZFSBOOT_BOOT_POOL" ]; then - f_eval_catch $funcname gpart \ - "$GPART_ADD_ALIGN_LABEL_WITH_SIZE" \ - "$align_big" boot$index freebsd-zfs \ - ${bootsize}b $disk || return $FAILURE - # Pedantically nuke any old labels - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/$disk$bootpart - if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then - # Pedantically detach targetpart for later - f_eval_catch -d $funcname geli \ - "$GELI_DETACH_F" \ - /dev/$disk$targetpart - fi - fi - - # - # 3. Add freebsd-swap partition labeled `swap#' - # - if [ ${swapsize:-0} -gt 0 ]; then - f_eval_catch $funcname gpart \ - "$GPART_ADD_ALIGN_LABEL_WITH_SIZE" \ - "$align_big" swap$index freebsd-swap \ - ${swapsize}b $disk || return $FAILURE - # Pedantically nuke any old labels on the swap - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/$disk$swappart - fi - - # - # 4. Add freebsd-zfs partition labeled `zfs#' for zroot - # - if [ "$ZFSBOOT_POOL_SIZE" ]; then - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN_LABEL_WITH_SIZE" \ - "$align_big" zfs$index freebsd-zfs $ZFSBOOT_POOL_SIZE $disk || - return $FAILURE - else - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN_LABEL" \ - "$align_big" zfs$index freebsd-zfs $disk || - return $FAILURE - fi - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/$disk$targetpart - ;; - - MBR) f_dprintf "$funcname: Creating MBR layout..." - # - # Enable boot pool if encryption is desired - # - [ "$ZFSBOOT_GELI_ENCRYPTION" ] && ZFSBOOT_BOOT_POOL=1 - # - # 1. Create MBR layout (no labels) - # - f_eval_catch $funcname gpart "$GPART_CREATE" mbr $disk || - return $FAILURE - f_eval_catch $funcname gpart "$GPART_BOOTCODE" /boot/mbr \ - $disk || return $FAILURE - - # - # 2. Add freebsd slice with all available space - # - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN" \ - "$align_small" freebsd $disk || return $FAILURE - f_eval_catch $funcname gpart "$GPART_SET_ACTIVE" 1 $disk || - return $FAILURE - # Pedantically nuke any old labels - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/${disk}s1 - # Pedantically nuke any old scheme - f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" ${disk}s1 - - # - # 3. Write BSD scheme to the freebsd slice - # - f_eval_catch $funcname gpart "$GPART_CREATE" BSD ${disk}s1 || - return $FAILURE - - # NB: zpool will use s1a (no labels) - bootpart=s1a swappart=s1b targetpart=s1d mbrindex=4 - - # - # Always prepare a boot pool on MBR - # Do not align this partition, there must not be a gap - # - ZFSBOOT_BOOT_POOL=1 - f_eval_catch $funcname gpart \ - "$GPART_ADD_ALIGN_INDEX_WITH_SIZE" \ - "" 1 freebsd-zfs ${bootsize}b ${disk}s1 || - return $FAILURE - # Pedantically nuke any old labels - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/$disk$bootpart - if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then - # Pedantically detach targetpart for later - f_eval_catch -d $funcname geli \ - "$GELI_DETACH_F" \ - /dev/$disk$targetpart - fi - - # - # 4. Add freebsd-swap partition - # - if [ ${swapsize:-0} -gt 0 ]; then - f_eval_catch $funcname gpart \ - "$GPART_ADD_ALIGN_INDEX_WITH_SIZE" \ - "$align_small" 2 freebsd-swap \ - ${swapsize}b ${disk}s1 || return $FAILURE - # Pedantically nuke any old labels on the swap - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/${disk}s1b - fi - - # - # 5. Add freebsd-zfs partition for zroot - # - if [ "$ZFSBOOT_POOL_SIZE" ]; then - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN_INDEX_WITH_SIZE" \ - "$align_small" $mbrindex freebsd-zfs $ZFSBOOT_POOL_SIZE ${disk}s1 || return $FAILURE - else - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN_INDEX" \ - "$align_small" $mbrindex freebsd-zfs ${disk}s1 || return $FAILURE - fi - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/$disk$targetpart # Pedantic - f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ - /boot/zfsboot /dev/${disk}s1 count=1 || - return $FAILURE - ;; - - esac # $ZFSBOOT_PARTITION_SCHEME - - # Update fstab(5) - local swapsize - f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize - if [ "$isswapmirror" ]; then - # This is not the first disk in the mirror, do nothing - elif [ ${swapsize:-0} -eq 0 ]; then - # If swap is 0 sized, don't add it to fstab - elif [ "$ZFSBOOT_SWAP_ENCRYPTION" -a "$ZFSBOOT_SWAP_MIRROR" ]; then - f_eval_catch $funcname printf "$PRINTF_FSTAB" \ - /dev/mirror/swap.eli none swap sw 0 0 \ - $BSDINSTALL_TMPETC/fstab || return $FAILURE - isswapmirror=1 - elif [ "$ZFSBOOT_SWAP_MIRROR" ]; then - f_eval_catch $funcname printf "$PRINTF_FSTAB" \ - /dev/mirror/swap none swap sw 0 0 \ - $BSDINSTALL_TMPETC/fstab || return $FAILURE - isswapmirror=1 - elif [ "$ZFSBOOT_SWAP_ENCRYPTION" ]; then - f_eval_catch $funcname printf "$PRINTF_FSTAB" \ - /dev/$disk${swappart}.eli none swap sw 0 0 \ - $BSDINSTALL_TMPETC/fstab || return $FAILURE - else - f_eval_catch $funcname printf "$PRINTF_FSTAB" \ - /dev/$disk$swappart none swap sw 0 0 \ - $BSDINSTALL_TMPETC/fstab || return $FAILURE - fi - - return $SUCCESS -} - -# zfs_create_boot $poolname $vdev_type $disks ... -# -# Creates boot pool and dataset layout. Returns error if something goes wrong. -# Errors are printed to stderr for collection and display. -# -zfs_create_boot() -{ - local funcname=zfs_create_boot - local zroot_name="$1" - local zroot_vdevtype="$2" - local zroot_vdevs= # Calculated below - local swap_devs= # Calculated below - local boot_vdevs= # Used for geli(8) and/or MBR layouts - shift 2 # poolname vdev_type - local disks="$*" disk - local isswapmirror - local bootpart targetpart swappart # Set by zfs_create_diskpart() below - local create_options - local efibootpart - - # - # Pedantic checks; should never be seen - # - if [ ! "$zroot_name" ]; then - f_dprintf "$funcname: NULL poolname" - msg_error="$msg_error: $funcname" \ - f_show_err "$msg_null_poolname" - return $FAILURE - fi - if [ $# -lt 1 ]; then - f_dprintf "$funcname: missing disk arguments" - msg_error="$msg_error: $funcname" \ - f_show_err "$msg_missing_disk_arguments" - return $FAILURE - fi - f_dprintf "$funcname: poolname=[%s] vdev_type=[%s]" \ - "$zroot_name" "$zroot_vdevtype" - - # - # Initialize fstab(5) - # - f_dprintf "$funcname: Initializing temporary fstab(5) file..." - f_eval_catch $funcname sh "$SHELL_TRUNCATE" $BSDINSTALL_TMPETC/fstab || - return $FAILURE - f_eval_catch $funcname printf "$PRINTF_FSTAB" \ - "# Device" Mountpoint FStype Options Dump "Pass#" \ - $BSDINSTALL_TMPETC/fstab || return $FAILURE - - # - # Expand SI units in desired sizes - # - f_dprintf "$funcname: Expanding supplied size values..." - local swapsize bootsize poolsize - if ! f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize; then - f_dprintf "$funcname: Invalid swap size \`%s'" \ - "$ZFSBOOT_SWAP_SIZE" - f_show_err "$msg_invalid_swap_size" "$ZFSBOOT_SWAP_SIZE" - return $FAILURE - fi - if ! f_expand_number "$ZFSBOOT_BOOT_POOL_SIZE" bootsize; then - f_dprintf "$funcname: Invalid boot pool size \`%s'" \ - "$ZFSBOOT_BOOT_POOL_SIZE" - f_show_err "$msg_invalid_boot_pool_size" \ - "$ZFSBOOT_BOOT_POOL_SIZE" - return $FAILURE - fi - if [ "$ZFSBOOT_POOL_SIZE" ]; then - if ! f_expand_number "$ZFSBOOT_POOL_SIZE" poolsize; then - f_dprintf "$funcname: Invalid pool size \`%s'" \ - "$ZFSBOOT_POOL_SIZE" - f_show_err "$msg_invalid_pool_size" \ - "$ZFSBOOT_POOL_SIZE" - fi - f_dprintf "$funcname: ZFSBOOT_POOL_SIZE=[%s] poolsize=[%s]" \ - "$ZFSBOOT_POOL_SIZE" "$poolsize" - fi - f_dprintf "$funcname: ZFSBOOT_SWAP_SIZE=[%s] swapsize=[%s]" \ - "$ZFSBOOT_SWAP_SIZE" "$swapsize" - f_dprintf "$funcname: ZFSBOOT_BOOT_POOL_SIZE=[%s] bootsize=[%s]" \ - "$ZFSBOOT_BOOT_POOL_SIZE" "$bootsize" - - # - # Destroy the pool in-case this is our second time 'round (case of - # failure and installer presented ``Retry'' option to come back). - # - # NB: If we don't destroy the pool, later gpart(8) destroy commands - # that try to clear existing partitions (see zfs_create_diskpart()) - # will fail with a `Device Busy' error, leading to `GEOM exists'. - # - f_eval_catch -d $funcname zpool "$ZPOOL_DESTROY" "$zroot_name" - - # - # Prepare the disks and build pool device list(s) - # - f_dprintf "$funcname: Preparing disk partitions for ZFS pool..." - - # Force 4K sectors using vfs.zfs.min_auto_ashift=12 - if [ "$ZFSBOOT_FORCE_4K_SECTORS" ]; then - f_dprintf "$funcname: With 4K sectors..." - f_eval_catch $funcname sysctl "$SYSCTL_ZFS_MIN_ASHIFT_12" \ - || return $FAILURE - sysctl kern.geom.part.mbr.enforce_chs=0 - fi - local n=0 - for disk in $disks; do - zfs_create_diskpart $disk $n || return $FAILURE - # Now $bootpart, $targetpart, and $swappart are set (suffix - # for $disk) - if [ "$ZFSBOOT_BOOT_POOL" ]; then - boot_vdevs="$boot_vdevs $disk$bootpart" - fi - zroot_vdevs="$zroot_vdevs $disk$targetpart" - if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then - zroot_vdevs="$zroot_vdevs.eli" - fi - - n=$(( $n + 1 )) - done # disks - - # - # If we need/want a boot pool, create it - # - if [ "$ZFSBOOT_BOOT_POOL" ]; then - local bootpool_vdevtype= # Calculated below - local bootpool_options= # Calculated below - local bootpool_name="$ZFSBOOT_BOOT_POOL_NAME" - local bootpool="$BSDINSTALL_CHROOT/$bootpool_name" - local zroot_key="${ZFSBOOT_GELI_KEY_FILE#/}" - - f_dprintf "$funcname: Setting up boot pool..." - [ "$ZFSBOOT_GELI_ENCRYPTION" ] && - f_dprintf "$funcname: For encrypted root disk..." - - # Create parent directory for boot pool - f_eval_catch -d $funcname umount "$UMOUNT" "$BSDINSTALL_CHROOT" - f_eval_catch $funcname mount "$MOUNT_TYPE" tmpfs none \ - $BSDINSTALL_CHROOT || return $FAILURE - - # Create mirror across the boot partition on all disks - local nvdevs - f_count nvdevs $boot_vdevs - [ $nvdevs -gt 1 ] && bootpool_vdevtype=mirror - - create_options="$ZFSBOOT_BOOT_POOL_CREATE_OPTIONS" - bootpool_options="-o altroot=$BSDINSTALL_CHROOT" - bootpool_options="$bootpool_options $create_options" - bootpool_options="$bootpool_options -m \"/$bootpool_name\" -f" - f_eval_catch $funcname zpool "$ZPOOL_CREATE_WITH_OPTIONS" \ - "$bootpool_options" "$bootpool_name" \ - "$bootpool_vdevtype" "$boot_vdevs" || - return $FAILURE - - f_eval_catch $funcname mkdir "$MKDIR_P" "$bootpool/boot" || - return $FAILURE - - if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then - # Generate an encryption key using random(4) - f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ - /dev/random "$bootpool/$zroot_key" \ - "bs=4096 count=1" || return $FAILURE - f_eval_catch $funcname chmod "$CHMOD_MODE" \ - go-wrx "$bootpool/$zroot_key" || - return $FAILURE - fi - - fi - - # - # Create the geli(8) GEOMS - # - if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then - # - # Load the AES-NI kernel module to accelerate encryption - # - f_eval_catch -d $funcname kldload "$KLDLOAD" "aesni" - # Prompt user for password (twice) - if ! msg_enter_new_password="$msg_geli_password" \ - f_dialog_input_password - then - f_dprintf "$funcname: User cancelled" - f_show_err "$msg_user_cancelled" - return $FAILURE - fi - - # Initialize geli(8) on each of the target partitions - for disk in $disks; do - f_dialog_info "$msg_geli_setup" \ - 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD - if [ "$ZFSBOOT_BOOT_POOL" ]; then - if ! echo "$pw_password" | f_eval_catch \ - $funcname geli "$GELI_PASSWORD_INIT" \ - "$bootpool/boot/$disk$targetpart.eli" \ - AES-XTS "$bootpool/$zroot_key" \ - $disk$targetpart - then - f_interactive || f_die - unset pw_password # Sensitive info - return $FAILURE - fi - if ! echo "$pw_password" | f_eval_catch \ - $funcname geli "$GELI_ATTACH" \ - "$bootpool/$zroot_key" $disk$targetpart - then - f_interactive || f_die - unset pw_password # Sensitive info - return $FAILURE - fi - else - # With no bootpool, there is no place to store - # the key files, use only a password - if ! echo "$pw_password" | f_eval_catch \ - $funcname geli \ - "$GELI_PASSWORD_GELIBOOT_INIT" \ - AES-XTS $disk$targetpart - then - f_interactive || f_die - unset pw_password # Sensitive info - return $FAILURE - fi - if ! echo "$pw_password" | f_eval_catch \ - $funcname geli "$GELI_ATTACH_NOKEY" \ - $disk$targetpart - then - f_interactive || f_die - unset pw_password # Sensitive info - return $FAILURE - fi - fi - done - unset pw_password # Sensitive info - fi - - if [ "$ZFSBOOT_BOOT_POOL" ]; then - # Clean up - f_eval_catch $funcname zfs "$ZFS_UNMOUNT" "$bootpool_name" || - return $FAILURE - # tmpfs - f_eval_catch -d $funcname umount "$UMOUNT" "$BSDINSTALL_CHROOT" - fi - - # - # Create the gmirror(8) GEOMS for swap - # - if [ ${swapsize:-0} -gt 0 -a "$ZFSBOOT_SWAP_MIRROR" ]; then - for disk in $disks; do - swap_devs="$swap_devs $disk$swappart" - done - f_eval_catch $funcname gmirror "$SWAP_GMIRROR_LABEL" \ - "$swap_devs" || return $FAILURE - fi - - # - # Create the ZFS root pool with desired type and disk devices - # - f_dprintf "$funcname: Creating root pool..." - create_options="$ZFSBOOT_POOL_CREATE_OPTIONS" - if [ "$zroot_vdevtype" == "raid10" ]; then - raid10_vdevs="" - for vdev in $zroot_vdevs; do - f_count nvdev $raid10_vdevs - if [ $(( $nvdev % 3 )) -eq 0 ]; then - raid10_vdevs="$raid10_vdevs mirror" - fi - raid10_vdevs="$raid10_vdevs $vdev" - done - f_eval_catch $funcname zpool "$ZPOOL_CREATE_WITH_OPTIONS" \ - "-o altroot=$BSDINSTALL_CHROOT $create_options -m none -f" \ - "$zroot_name" "" "$raid10_vdevs" || return $FAILURE - else - f_eval_catch $funcname zpool "$ZPOOL_CREATE_WITH_OPTIONS" \ - "-o altroot=$BSDINSTALL_CHROOT $create_options -m none -f" \ - "$zroot_name" "$zroot_vdevtype" "$zroot_vdevs" || - return $FAILURE - fi - - # - # Create ZFS dataset layout within the new root pool - # - f_dprintf "$funcname: Creating ZFS datasets..." - echo "$ZFSBOOT_DATASETS" | while read dataset options; do - # Skip blank lines and comments - case "$dataset" in "#"*|"") continue; esac - # Remove potential inline comments in options - options="${options%%#*}" - # Replace tabs with spaces - f_replaceall "$options" " " " " options - # Reduce contiguous runs of space to one single space - oldoptions= - while [ "$oldoptions" != "$options" ]; do - oldoptions="$options" - f_replaceall "$options" " " " " options - done - # Replace both commas and spaces with ` -o ' - f_replaceall "$options" "[ ,]" " -o " options - # Create the dataset with desired options - f_eval_catch $funcname zfs "$ZFS_CREATE_WITH_OPTIONS" \ - "${options:+-o $options}" "$zroot_name$dataset" || - return $FAILURE - done - - # - # Set a mountpoint for the root of the pool so newly created datasets - # have a mountpoint to inherit - # - f_dprintf "$funcname: Setting mountpoint for root of the pool..." - f_eval_catch $funcname zfs "$ZFS_SET" \ - "mountpoint=/$zroot_name" "$zroot_name" || return $FAILURE - - # Touch up permissions on the tmp directories - f_dprintf "$funcname: Modifying directory permissions..." - local dir - for dir in /tmp /var/tmp; do - f_eval_catch $funcname mkdir "$MKDIR_P" \ - $BSDINSTALL_CHROOT$dir || return $FAILURE - f_eval_catch $funcname chmod "$CHMOD_MODE" 1777 \ - $BSDINSTALL_CHROOT$dir || return $FAILURE - done - - # Set bootfs property - local zroot_bootfs="$ZFSBOOT_BEROOT_NAME/$ZFSBOOT_BOOTFS_NAME" - f_dprintf "$funcname: Setting bootfs property..." - f_eval_catch $funcname zpool "$ZPOOL_SET" \ - "bootfs=\"$zroot_name/$zroot_bootfs\"" "$zroot_name" || - return $FAILURE - - # MBR boot loader touch-up - if [ "$ZFSBOOT_PARTITION_SCHEME" = "MBR" ]; then - # Export the pool(s) - f_dprintf "$funcname: Temporarily exporting ZFS pool(s)..." - f_eval_catch $funcname zpool "$ZPOOL_EXPORT" "$zroot_name" || - return $FAILURE - if [ "$ZFSBOOT_BOOT_POOL" ]; then - f_eval_catch $funcname zpool "$ZPOOL_EXPORT" \ - "$bootpool_name" || return $FAILURE - fi - - f_dprintf "$funcname: Updating MBR boot loader on disks..." - # Stick the ZFS boot loader in the "convenient hole" after - # the ZFS internal metadata - for disk in $disks; do - f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ - /boot/zfsboot /dev/$disk$bootpart \ - "skip=1 seek=1024" || return $FAILURE - done - - # Re-import the ZFS pool(s) - f_dprintf "$funcname: Re-importing ZFS pool(s)..." - f_eval_catch $funcname zpool "$ZPOOL_IMPORT_WITH_OPTIONS" \ - "-o altroot=\"$BSDINSTALL_CHROOT\"" \ - "$zroot_name" || return $FAILURE - if [ "$ZFSBOOT_BOOT_POOL" ]; then - # Import the bootpool, but do not mount it yet - f_eval_catch $funcname zpool \ - "$ZPOOL_IMPORT_WITH_OPTIONS" \ - "-o altroot=\"$BSDINSTALL_CHROOT\" -N" \ - "$bootpool_name" || return $FAILURE - fi - fi - - # Remount bootpool and create symlink(s) - if [ "$ZFSBOOT_BOOT_POOL" ]; then - f_eval_catch $funcname zfs "$ZFS_MOUNT" "$bootpool_name" || - return $FAILURE - f_dprintf "$funcname: Creating /boot symlink for boot pool..." - f_eval_catch $funcname ln "$LN_SF" "$bootpool_name/boot" \ - $BSDINSTALL_CHROOT/boot || return $FAILURE - fi - - # zpool.cache is required to mount more than one pool at boot time - f_dprintf "$funcname: Configuring zpool.cache for zroot..." - f_eval_catch $funcname mkdir "$MKDIR_P" $BSDINSTALL_CHROOT/boot/zfs || - return $FAILURE - f_eval_catch $funcname zpool "$ZPOOL_SET" \ - "cachefile=\"$BSDINSTALL_CHROOT/boot/zfs/zpool.cache\"" \ - "$zroot_name" || return $FAILURE - - if [ "$ZFSBOOT_BOOT_POOL" ]; then - f_eval_catch $funcname printf "$PRINTF_CONF" \ - vfs.root.mountfrom \ - "\"zfs:$zroot_name/$zroot_bootfs\"" \ - $BSDINSTALL_TMPBOOT/loader.conf.root || return $FAILURE - fi - # - # Set canmount=noauto so that the default Boot Environment (BE) does - # not get mounted if a different BE is selected from the beastie menu - # - f_dprintf "$funcname: Set canmount=noauto for the root of the pool..." - f_eval_catch $funcname zfs "$ZFS_SET" "canmount=noauto" \ - "$zroot_name/$ZFSBOOT_BEROOT_NAME/$ZFSBOOT_BOOTFS_NAME" - - # Last, but not least... required lines for rc.conf(5)/loader.conf(5) - # NOTE: We later concatenate these into their destination - f_dprintf "%s: Configuring rc.conf(5)/loader.conf(5) additions..." \ - "$funcname" - f_eval_catch $funcname echo "$ECHO_APPEND" 'zfs_enable=\"YES\"' \ - $BSDINSTALL_TMPETC/rc.conf.zfs || return $FAILURE - f_eval_catch $funcname echo "$ECHO_APPEND" \ - 'kern.geom.label.disk_ident.enable=\"0\"' \ - $BSDINSTALL_TMPBOOT/loader.conf.zfs || return $FAILURE - f_eval_catch $funcname echo "$ECHO_APPEND" \ - 'kern.geom.label.gptid.enable=\"0\"' \ - $BSDINSTALL_TMPBOOT/loader.conf.zfs || return $FAILURE - - if [ "$ZFSBOOT_FORCE_4K_SECTORS" ]; then - f_eval_catch $funcname echo "$ECHO_APPEND" \ - 'vfs.zfs.min_auto_ashift=12' \ - $BSDINSTALL_TMPETC/sysctl.conf.zfs || return $FAILURE - fi - - if [ "$ZFSBOOT_SWAP_MIRROR" ]; then - f_eval_catch $funcname echo "$ECHO_APPEND" \ - 'geom_mirror_load=\"YES\"' \ - $BSDINSTALL_TMPBOOT/loader.conf.gmirror || - return $FAILURE - fi - - # We're all done unless we should go on to do encryption - [ "$ZFSBOOT_GELI_ENCRYPTION" ] || return $SUCCESS - - # - # Configure geli(8)-based encryption - # - f_dprintf "$funcname: Configuring disk encryption..." - f_eval_catch $funcname echo "$ECHO_APPEND" 'aesni_load=\"YES\"' \ - $BSDINSTALL_TMPBOOT/loader.conf.aesni || return $FAILURE - f_eval_catch $funcname echo "$ECHO_APPEND" 'geom_eli_load=\"YES\"' \ - $BSDINSTALL_TMPBOOT/loader.conf.geli || return $FAILURE - - # We're all done unless we should go on for boot pool - [ "$ZFSBOOT_BOOT_POOL" ] || return $SUCCESS - - for disk in $disks; do - f_eval_catch $funcname printf "$PRINTF_CONF" \ - geli_%s_keyfile0_load "$disk$targetpart YES" \ - $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || - return $FAILURE - f_eval_catch $funcname printf "$PRINTF_CONF" \ - geli_%s_keyfile0_type \ - "$disk$targetpart $disk$targetpart:geli_keyfile0" \ - $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || - return $FAILURE - f_eval_catch $funcname printf "$PRINTF_CONF" \ - geli_%s_keyfile0_name \ - "$disk$targetpart \"$ZFSBOOT_GELI_KEY_FILE\"" \ - $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || - return $FAILURE - done - - # Set cachefile for boot pool so it auto-imports at system start - f_dprintf "$funcname: Configuring zpool.cache for boot pool..." - f_eval_catch $funcname zpool "$ZPOOL_SET" \ - "cachefile=\"$BSDINSTALL_CHROOT/boot/zfs/zpool.cache\"" \ - "$bootpool_name" || return $FAILURE - - # Some additional geli(8) requirements for loader.conf(5) - for option in \ - 'zpool_cache_load=\"YES\"' \ - 'zpool_cache_type=\"/boot/zfs/zpool.cache\"' \ - 'zpool_cache_name=\"/boot/zfs/zpool.cache\"' \ - 'geom_eli_passphrase_prompt=\"YES\"' \ - ; do - f_eval_catch $funcname echo "$ECHO_APPEND" "$option" \ - $BSDINSTALL_TMPBOOT/loader.conf.zfs || - return $FAILURE - done - return $SUCCESS -} - -# dialog_menu_diskinfo -# -# Prompt the user to select a disk and then provide detailed info on it. -# -dialog_menu_diskinfo() -{ - local device disk - - # - # Break from loop when user cancels disk selection - # - while :; do - device=$( msg_cancel="$msg_back" f_device_menu \ - "$DIALOG_TITLE" "$msg_select_a_disk_device" "" \ - $DEVICE_TYPE_DISK 2>&1 ) || break - $device get name disk - - # Show gpart(8) `show' and camcontrol(8) `inquiry' data - f_show_msg "$msg_detailed_disk_info" \ - "$disk" "$( gpart show $disk 2> /dev/null )" \ - "$disk" "$( camcontrol inquiry $disk 2> /dev/null )" \ - "$disk" "$( camcontrol identify $disk 2> /dev/null )" - done - - return $SUCCESS -} - -############################################################ MAIN - -# -# Initialize -# -f_dialog_title "$msg_zfs_configuration" -f_dialog_backtitle "$msg_freebsd_installer" - -# User may have specifically requested ZFS-related operations be interactive -! f_interactive && f_zfsinteractive && unset $VAR_NONINTERACTIVE - -# -# Debugging -# -f_dprintf "BSDINSTALL_CHROOT=[%s]" "$BSDINSTALL_CHROOT" -f_dprintf "BSDINSTALL_TMPETC=[%s]" "$BSDINSTALL_TMPETC" -f_dprintf "FSTAB_FMT=[%s]" "$FSTAB_FMT" - -# -# Determine default boot type -# -case $(uname -m) in -arm64|riscv) - # We support only UEFI boot for arm64 and riscv. - : ${ZFSBOOT_BOOT_TYPE:=UEFI} - : ${ZFSBOOT_PARTITION_SCHEME:=GPT} - ;; -*) - # If the system was booted with UEFI, set the default boot type to UEFI - bootmethod=$( sysctl -n machdep.bootmethod ) - f_dprintf "machdep.bootmethod=[%s]" "$bootmethod" - if [ "$bootmethod" = "UEFI" ]; then - : ${ZFSBOOT_BOOT_TYPE:=BIOS+UEFI} - : ${ZFSBOOT_PARTITION_SCHEME:=GPT} - else - : ${ZFSBOOT_BOOT_TYPE:=BIOS} - : ${ZFSBOOT_PARTITION_SCHEME:=GPT} - fi - ;; -esac - -# -# Loop over the main menu until we've accomplished what we came here to do -# -while :; do - if ! f_interactive; then - retval=$DIALOG_OK - mtag=">>> $msg_install" - else - dialog_menu_main - retval=$? - f_dialog_menutag_fetch mtag - fi - - f_dprintf "retval=%u mtag=[%s]" $retval "$mtag" - [ $retval -eq $DIALOG_OK ] || f_die - - case "$mtag" in - ">>> $msg_install") - # - # First, validate the user's selections - # - - # Make sure they gave us a name for the pool - if [ ! "$ZFSBOOT_POOL_NAME" ]; then - f_dprintf "Pool name cannot be empty." - f_show_err "$msg_pool_name_cannot_be_empty" - continue - fi - - # Validate vdev type against number of disks selected/scripted - # (also validates that ZFSBOOT_DISKS are real [probed] disks) - # NB: dialog_menu_layout supports running non-interactively - dialog_menu_layout || continue - - # Make sure each disk will have room for ZFS - if f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize && - f_expand_number "$ZFSBOOT_BOOT_POOL_SIZE" bootsize && - f_expand_number "1g" zpoolmin - then - minsize=$swapsize teeny_disks= - if [ "$ZFSBOOT_POOL_SIZE" ]; then - f_expand_number "$ZFSBOOT_POOL_SIZE" poolsize - minsize=$(( $minsize + $poolsize )) - fi - [ "$ZFSBOOT_BOOT_POOL" ] && - minsize=$(( $minsize + $bootsize )) - for disk in $ZFSBOOT_DISKS; do - debug= f_device_find -1 \ - $disk $DEVICE_TYPE_DISK device - $device get capacity disksize || continue - [ ${disksize:-0} -ge 0 ] || disksize=0 - [ $disksize -lt $minsize ] && - teeny_disks="$teeny_disks $disk" - done - if [ "$teeny_disks" ]; then - f_dprintf "swapsize=[%s] bootsize[%s] %s" \ - "$ZFSBOOT_SWAP_SIZE" \ - "$ZFSBOOT_BOOT_POOL_SIZE" \ - "minsize=[$minsize]" - f_dprintf "These disks are too small: %s" \ - "$teeny_disks" - f_show_err "$msg_these_disks_are_too_small" \ - "$ZFSBOOT_SWAP_SIZE" \ - "$ZFSBOOT_BOOT_POOL_SIZE" \ - "$teeny_disks" - continue - fi - fi - - # - # Last Chance! - # - if f_interactive; then - dialog_last_chance $ZFSBOOT_DISKS || continue - fi - - # - # Let's do this - # - - vdev_type="$ZFSBOOT_VDEV_TYPE" - - # Blank the vdev type for the default layout - [ "$vdev_type" = "stripe" ] && vdev_type= - - zfs_create_boot "$ZFSBOOT_POOL_NAME" \ - "$vdev_type" $ZFSBOOT_DISKS || continue - - # To be reused by bootconfig - echo "$ZFSBOOT_DISKS" > ${TMPDIR:-"/tmp"}/bsdinstall-zfsboot - - break # to success - ;; - ?" $msg_pool_type_disks") - ZFSBOOT_CONFIRM_LAYOUT=1 - dialog_menu_layout - # User has poked settings, disable later confirmation - ZFSBOOT_CONFIRM_LAYOUT= - ;; - "- $msg_rescan_devices") f_device_rescan ;; - "- $msg_disk_info") dialog_menu_diskinfo ;; - ?" $msg_pool_name") - # Prompt the user to input/change the name for the new pool - f_dialog_input input \ - "$msg_please_enter_a_name_for_your_zpool" \ - "$ZFSBOOT_POOL_NAME" && - ZFSBOOT_POOL_NAME="$input" - ;; - ?" $msg_force_4k_sectors") - # Toggle the variable referenced both by the menu and later - if [ "$ZFSBOOT_FORCE_4K_SECTORS" ]; then - ZFSBOOT_FORCE_4K_SECTORS= - else - ZFSBOOT_FORCE_4K_SECTORS=1 - fi - ;; - ?" $msg_encrypt_disks") - # Toggle the variable referenced both by the menu and later - if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then - ZFSBOOT_GELI_ENCRYPTION= - else - ZFSBOOT_FORCE_4K_SECTORS=1 - ZFSBOOT_GELI_ENCRYPTION=1 - fi - ;; - ?" $msg_partition_scheme") - # Toggle between GPT (BIOS), GPT (UEFI) and MBR - if [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT" -a \ - "$ZFSBOOT_BOOT_TYPE" = "BIOS" ] - then - ZFSBOOT_PARTITION_SCHEME="GPT" - ZFSBOOT_BOOT_TYPE="UEFI" - elif [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT" -a \ - "$ZFSBOOT_BOOT_TYPE" = "UEFI" ] - then - ZFSBOOT_PARTITION_SCHEME="GPT" - ZFSBOOT_BOOT_TYPE="BIOS+UEFI" - elif [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT" ]; then - ZFSBOOT_PARTITION_SCHEME="MBR" - ZFSBOOT_BOOT_TYPE="BIOS" - elif [ "$ZFSBOOT_PARTITION_SCHEME" = "MBR" ]; then - ZFSBOOT_PARTITION_SCHEME="GPT + Active" - ZFSBOOT_BOOT_TYPE="BIOS" - elif [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT + Active" ]; then - ZFSBOOT_PARTITION_SCHEME="GPT + Lenovo Fix" - ZFSBOOT_BOOT_TYPE="BIOS" - else - ZFSBOOT_PARTITION_SCHEME="GPT" - ZFSBOOT_BOOT_TYPE="BIOS" - fi - ;; - ?" $msg_swap_size") - # Prompt the user to input/change the swap size for each disk - while :; do - f_dialog_input input \ - "$msg_please_enter_amount_of_swap_space" \ - "$ZFSBOOT_SWAP_SIZE" && - ZFSBOOT_SWAP_SIZE="${input:-0}" - if f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize - then - if [ $swapsize -ne 0 -a $swapsize -lt 104857600 ]; then - f_show_err "$msg_swap_toosmall" \ - "$ZFSBOOT_SWAP_SIZE" - continue; - else - break; - fi - else - f_show_err "$msg_swap_invalid" \ - "$ZFSBOOT_SWAP_SIZE" - continue; - fi - done - ;; - ?" $msg_swap_mirror") - # Toggle the variable referenced both by the menu and later - if [ "$ZFSBOOT_SWAP_MIRROR" ]; then - ZFSBOOT_SWAP_MIRROR= - else - ZFSBOOT_SWAP_MIRROR=1 - fi - ;; - ?" $msg_swap_encrypt") - # Toggle the variable referenced both by the menu and later - if [ "$ZFSBOOT_SWAP_ENCRYPTION" ]; then - ZFSBOOT_SWAP_ENCRYPTION= - else - ZFSBOOT_SWAP_ENCRYPTION=1 - fi - ;; - esac -done - -exit $SUCCESS - -################################################################################ -# END -################################################################################ |