diff options
Diffstat (limited to 'install-sh')
| -rwxr-xr-x | install-sh | 296 |
1 files changed, 239 insertions, 57 deletions
diff --git a/install-sh b/install-sh index d8b6283eaca1..398a88e14218 100755 --- a/install-sh +++ b/install-sh @@ -1,69 +1,251 @@ #!/bin/sh # -# this shell script is amazingly similar to the old and lamented -# BSD "install" command. It recognized the following options: +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). # -# -o target file owner -# -m target file mode -# -g target file group owner +# Copyright 1991 by the Massachusetts Institute of Technology # +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. # -# scan the options +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. # -while [ $# -gt 0 ]; do +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do case $1 in - -o) - owner=$2 - shift ; shift - ;; - - -m) - mode=$2 - shift; shift - ;; - - -g) - group=$2 - shift ; shift - ;; - - -*) - echo "install: unknown option $1" - exit - ;; - - *) - break - ;; + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; esac done -# -# we need two more: filename and destination -# -if [ $# -ne 2 ]; then - echo "Usage: install [ -o owner ] [ -m mode ] [ -g group ] file destination" - exit -fi -# -# first, copy -# -cp $1 $2 -# -# normalize the name -# -dest=$2 -if [ -d $2 ]; then - dest=$2/`basename $1` -fi -# -# do optional things -# -if [ "$owner" ]; then - chown $owner $dest + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + : fi -if [ "$group" ]; then - chgrp $group $dest + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=$mkdirprog + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + : + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + : + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + : + fi fi -if [ "$mode" ]; then - chmod $mode $dest + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' + ' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + : + fi + + pathcomp="${pathcomp}/" +done fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + : + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 |