diff options
Diffstat (limited to 'src/arm/at91-sam9x60ek.dts')
| -rw-r--r-- | src/arm/at91-sam9x60ek.dts | 50 |
1 files changed, 10 insertions, 40 deletions
diff --git a/src/arm/at91-sam9x60ek.dts b/src/arm/at91-sam9x60ek.dts index d929c1ba5789..180e4b1aa2f6 100644 --- a/src/arm/at91-sam9x60ek.dts +++ b/src/arm/at91-sam9x60ek.dts @@ -16,8 +16,8 @@ aliases { i2c0 = &i2c0; - i2c1 = &i2c1; - serial1 = &uart1; + i2c1 = &i2c6; + serial1 = &uart5; }; chosen { @@ -207,15 +207,11 @@ status = "okay"; i2c0: i2c@600 { - compatible = "microchip,sam9x60-i2c"; - reg = <0x600 0x200>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - atmel,fifo-size = <16>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; @@ -234,17 +230,10 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; status = "disabled"; - spi0: spi@400 { - compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; - clock-names = "spi_clk"; + spi4: spi@400 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <16>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; }; @@ -253,24 +242,9 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; status = "okay"; - uart1: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - atmel,usart-mode = <AT91_USART_MODE_SERIAL>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(10))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(11))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; - clock-names = "usart"; - pinctrl-0 = <&pinctrl_flx5_default>; + uart5: serial@200 { pinctrl-names = "default"; - atmel,use-dma-rx; - atmel,use-dma-tx; + pinctrl-0 = <&pinctrl_flx5_default>; status = "okay"; }; }; @@ -279,16 +253,12 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; - i2c1: i2c@600 { - compatible = "microchip,sam9x60-i2c"; - reg = <0x600 0x200>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + i2c6: i2c@600 { #address-cells = <1>; #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx6_default>; - atmel,fifo-size = <16>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; @@ -439,7 +409,7 @@ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; - pinctrl_flx5_default: flx_uart { + pinctrl_flx5_default: flx5_uart { atmel,pins = <AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE |