diff options
Diffstat (limited to 'src/arm/imx25-pdk.dts')
| -rw-r--r-- | src/arm/imx25-pdk.dts | 63 |
1 files changed, 61 insertions, 2 deletions
diff --git a/src/arm/imx25-pdk.dts b/src/arm/imx25-pdk.dts index 9c21b1583762..9351296356dc 100644 --- a/src/arm/imx25-pdk.dts +++ b/src/arm/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "imx25.dtsi" @@ -75,6 +76,27 @@ mux-int-port = <1>; mux-ext-port = <4>; }; + + wvga: display { + model = "CLAA057VC01CW"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&wvga_timings>; + display-timings { + wvga_timings: 640x480 { + hactive = <640>; + vactive = <480>; + hback-porch = <45>; + hfront-porch = <114>; + hsync-len = <1>; + vback-porch = <33>; + vfront-porch = <11>; + vsync-len = <1>; + clock-frequency = <25200000>; + }; + }; + }; }; &audmux { @@ -93,8 +115,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 1 0>; - wp-gpios = <&gpio2 0 0>; + cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -190,6 +212,33 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX25_PAD_LD0__LD0 0xe0 + MX25_PAD_LD1__LD1 0xe0 + MX25_PAD_LD2__LD2 0xe0 + MX25_PAD_LD3__LD3 0xe0 + MX25_PAD_LD4__LD4 0xe0 + MX25_PAD_LD5__LD5 0xe0 + MX25_PAD_LD6__LD6 0xe0 + MX25_PAD_LD7__LD7 0xe0 + MX25_PAD_LD8__LD8 0xe0 + MX25_PAD_LD9__LD9 0xe0 + MX25_PAD_LD10__LD10 0xe0 + MX25_PAD_LD11__LD11 0xe0 + MX25_PAD_LD12__LD12 0xe0 + MX25_PAD_LD13__LD13 0xe0 + MX25_PAD_LD14__LD14 0xe0 + MX25_PAD_LD15__LD15 0xe0 + MX25_PAD_GPIO_E__LD16 0xe0 + MX25_PAD_GPIO_F__LD17 0xe0 + MX25_PAD_HSYNC__HSYNC 0xe0 + MX25_PAD_VSYNC__VSYNC 0xe0 + MX25_PAD_LSCLK__LSCLK 0xe0 + MX25_PAD_OE_ACD__OE_ACD 0xe0 + MX25_PAD_CONTRAST__CONTRAST 0xe0 + >; + }; pinctrl_uart1: uart1grp { fsl,pins = < @@ -202,6 +251,16 @@ }; }; +&lcdc { + display = <&wvga>; + fsl,lpccr = <0x00a903ff>; + fsl,lscr1 = <0x00120300>; + fsl,dmacr = <0x00020010>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; +}; + &nfc { nand-on-flash-bbt; status = "okay"; |