diff options
Diffstat (limited to 'src/arm/imx51-zii-scu3-esb.dts')
-rw-r--r-- | src/arm/imx51-zii-scu3-esb.dts | 472 |
1 files changed, 0 insertions, 472 deletions
diff --git a/src/arm/imx51-zii-scu3-esb.dts b/src/arm/imx51-zii-scu3-esb.dts deleted file mode 100644 index 9f857eb44bf7..000000000000 --- a/src/arm/imx51-zii-scu3-esb.dts +++ /dev/null @@ -1,472 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) - -/* - * Copyright (C) 2018 Zodiac Inflight Innovations - */ - -/dts-v1/; - -#include "imx51.dtsi" - -/ { - model = "ZII SCU3 ESB board"; - compatible = "zii,imx51-scu3-esb", "fsl,imx51"; - - chosen { - stdout-path = &uart1; - }; - - /* Will be filled by the bootloader */ - memory@90000000 { - device_type = "memory"; - reg = <0x90000000 0>; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_mmc_reset>; - gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; - startup-delay-us = <150000>; - }; -}; - -&cpu { - cpu-supply = <&sw1_reg>; -}; - -&ecspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, - <&gpio4 25 GPIO_ACTIVE_LOW>; - status = "okay"; - - pmic@0 { - compatible = "fsl,mc13892"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; - spi-max-frequency = <6000000>; - spi-cs-high; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - fsl,mc13xxx-uses-adc; - - regulators { - sw1_reg: sw1 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1375000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: sw3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - vpll_reg: vpll { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vdig_reg: vdig { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - }; - - vsd_reg: vsd { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3150000>; - }; - - vusb_reg: vusb { - regulator-always-on; - }; - - vusb2_reg: vusb2 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; - }; - - vvideo_reg: vvideo { - regulator-min-microvolt = <2775000>; - regulator-max-microvolt = <2775000>; - }; - - vaudio_reg: vaudio { - regulator-min-microvolt = <2300000>; - regulator-max-microvolt = <3000000>; - }; - - vcam_reg: vcam { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3000000>; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - }; - - leds { - #address-cells = <1>; - #size-cells = <0>; - led-control = <0x0 0x0 0x3f83f8 0x0>; - - sysled3: led3@3 { - reg = <3>; - label = "system:red:power"; - linux,default-trigger = "default-on"; - }; - - sysled4: led4@4 { - reg = <4>; - label = "system:green:act"; - linux,default-trigger = "heartbeat"; - }; - }; - }; - - flash@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <25000000>; - reg = <1>; - }; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <8>; - non-removable; - no-1-8-v; - no-sdio; - no-sd; - status = "okay"; -}; - -&esdhc4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc4>; - bus-width = <4>; - no-1-8-v; - no-sdio; - cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "mii"; - status = "okay"; - - fixed-link { - speed = <100>; - full-duplex; - }; - - fec_mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - dsa,member = <0 0>; - eeprom-length = <512>; - interrupt-parent = <&gpio4>; - interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_switch>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "port1"; - }; - - port@1 { - reg = <1>; - label = "port2"; - }; - - port@2 { - reg = <2>; - label = "port3"; - }; - - port@3 { - reg = <3>; - label = "scu2scu"; - }; - - port@4 { - reg = <4>; - label = "esb2host"; - }; - - port@5 { - reg = <5>; - label = "esb2mezz"; - phy-mode = "sgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - phy-mode = "mii"; - ethernet = <&fec>; - - fixed-link { - speed = <100>; - full-duplex; - }; - }; - }; - }; - }; -}; - -&ipu { - status = "disabled"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c04"; - pagesize = <16>; - reg = <0x50>; - }; - - lm75@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; - - mcu { - compatible = "zii,rave-sp-esb"; - current-speed = <57600>; - #address-cells = <1>; - #size-cells = <1>; - - watchdog { - compatible = "zii,rave-sp-watchdog-legacy"; - }; - - eeprom@a4 { - compatible = "zii,rave-sp-eeprom"; - reg = <0xa4 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - zii,eeprom-name = "main-eeprom"; - }; - }; -}; - -&usbotg { - dr_mode = "host"; - disable-over-current; - phy_type = "utmi_wide"; - vbus-supply = <&usb_vbus>; - status = "okay"; -}; - -&usbphy0 { - vcc-supply = <&vusb2_reg>; -}; - -&vpu { - status = "disabled"; -}; - -&wdog1 { - status = "disabled"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 - >; - }; - - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 - MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 - MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 - MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 - MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 - MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 - MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 - MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 - MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 - >; - }; - - pinctrl_esdhc4: esdhc4grp { - fsl,pins = < - MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 - MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 - MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 - MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 - MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 - MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 - MX51_PAD_NANDF_D0__GPIO4_8 0x100 - >; - }; - - pinctrl_fec: fecgrp { - fsl,pins = < - MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 - MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 - MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 - MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 - MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 - MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 - MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 - MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 - - MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 - MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 - MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 - MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 - MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 - MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 - MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 - MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed - MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed - >; - }; - - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX51_PAD_GPIO1_4__GPIO1_4 0x85 - MX51_PAD_GPIO1_8__GPIO1_8 0xe5 - >; - }; - - pinctrl_switch: switchgrp { - fsl,pins = < - MX51_PAD_AUD3_BB_CK__GPIO4_20 0xc5 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 - MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 - MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 - MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 - MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 - MX51_PAD_USBH1_DATA0__UART2_CTS 0x1c5 - MX51_PAD_USBH1_DATA3__UART2_RTS 0x1c5 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 - MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 - >; - }; - - pinctrl_usb_mmc_reset: usbmmcgrp { - fsl,pins = < - MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x100 - >; - }; -}; |