aboutsummaryrefslogtreecommitdiff
path: root/src/arm/imx6dl-lanmcu.dts
diff options
context:
space:
mode:
Diffstat (limited to 'src/arm/imx6dl-lanmcu.dts')
-rw-r--r--src/arm/imx6dl-lanmcu.dts474
1 files changed, 0 insertions, 474 deletions
diff --git a/src/arm/imx6dl-lanmcu.dts b/src/arm/imx6dl-lanmcu.dts
deleted file mode 100644
index fa823988312d..000000000000
--- a/src/arm/imx6dl-lanmcu.dts
+++ /dev/null
@@ -1,474 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2019 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6dl.dtsi"
-
-/ {
- model = "Van der Laan LANMCU";
- compatible = "vdl,lanmcu", "fsl,imx6dl";
-
- chosen {
- stdout-path = &uart4;
- };
-
- clock_ksz8081: clock-ksz8081 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <50000000>;
- clock-output-names = "enet_ref_pad";
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000 0>;
- brightness-levels = <0 1000>;
- num-interpolated-steps = <20>;
- default-brightness-level = <19>;
- };
-
- display {
- compatible = "fsl,imx-parallel-display";
- pinctrl-0 = <&pinctrl_ipu1_disp>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- display_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- display_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_leds>;
-
- led-0 {
- label = "debug0";
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- panel {
- compatible = "edt,etm0700g0bdh6";
- backlight = <&backlight>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&display_out>;
- };
- };
- };
-
- reg_otg_vbus: regulator-otg-vbus {
- compatible = "regulator-fixed";
- regulator-name = "otg-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wifi_npd>;
- reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
- };
-
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2>;
- status = "okay";
-};
-
-&clks {
- clocks = <&clock_ksz8081>;
- clock-names = "enet_ref_pad";
- assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
- assigned-clock-parents = <&clock_ksz8081>;
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rmii";
- phy-handle = <&rgmii_phy>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Microchip KSZ8081RNA PHY */
- rgmii_phy: ethernet-phy@0 {
- reg = <0>;
- interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <300>;
- };
- };
-};
-
-&gpio1 {
- gpio-line-names =
- "", "SD1_CD", "", "", "", "", "", "",
- "DEBUG_0", "BL_PWM", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "ENET_LED_GREEN",
- "", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
- gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "TS_INT", "USB_OTG1_OC", "USB_OTG1_PWR", "",
- "", "", "", "", "UART2_CTS", "", "UART3_CTS", "";
-};
-
-&gpio5 {
- gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "ENET_RST", "ENET_INT",
- "", "", "I2C1_SDA", "I2C1_SCL", "", "", "", "";
-};
-
-&gpio6 {
- gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "WLAN_REG_ON", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "";
-};
-
-&gpio7 {
- gpio-line-names =
- "", "", "", "", "", "", "", "",
- "EMMC_RST", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- /* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-
- touchscreen@38 {
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ts_edt>;
- interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-
- touchscreen-size-x = <1792>;
- touchscreen-size-y = <1024>;
-
- touchscreen-fuzz-x = <0>;
- touchscreen-fuzz-y = <0>;
-
- /* Touch screen calibration */
- threshold = <50>;
- gain = <5>;
- offset = <10>;
- };
-
- rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&display_in>;
-};
-
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- linux,rs485-enabled-at-boot-time;
- uart-has-rtscts;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- linux,rs485-enabled-at-boot-time;
- uart-has-rtscts;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <&reg_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- phy_type = "utmi";
- dr_mode = "host";
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- disable-wp;
- cap-sd-highspeed;
- no-mmc;
- no-sdio;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- no-1-8-v;
- non-removable;
- mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- bus-width = <8>;
- no-1-8-v;
- non-removable;
- no-sd;
- no-sdio;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_can1: can1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
- >;
- };
-
- pinctrl_can2: can2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
- MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
- >;
- };
-
- pinctrl_enet: enetgrp {
- fsl,pins = <
- /* MX6QDL_ENET_PINGRP4 */
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
-
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
- /* Phy reset */
- MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
- /* nINTRP */
- MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_ipu1_disp: ipudisp1grp {
- fsl,pins = <
- /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
- MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30
- MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30
- MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30
- MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30
- MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30
- MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30
- MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30
- MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30
- MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30
- MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30
- MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30
- MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30
- MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30
- MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30
- MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30
- MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30
- MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30
- MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30
- MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30
- MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30
- MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30
- MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30
- >;
- };
-
- pinctrl_leds: ledsgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
- >;
- };
-
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8
- >;
- };
-
- pinctrl_ts_edt: ts1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x130b1
- >;
- };
-
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x130b1
- >;
- };
-
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
- /* power enable, high active */
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
- MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b0
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
- MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
- >;
- };
-
- pinctrl_wifi_npd: wifigrp {
- fsl,pins = <
- /* WL_REG_ON */
- MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
- >;
- };
-};
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-02 03:17:33 +0000