diff options
Diffstat (limited to 'src/arm/imx6q-cm-fx6.dts')
-rw-r--r-- | src/arm/imx6q-cm-fx6.dts | 491 |
1 files changed, 0 insertions, 491 deletions
diff --git a/src/arm/imx6q-cm-fx6.dts b/src/arm/imx6q-cm-fx6.dts deleted file mode 100644 index 1ad41c944b4b..000000000000 --- a/src/arm/imx6q-cm-fx6.dts +++ /dev/null @@ -1,491 +0,0 @@ -/* - * Copyright 2013 CompuLab Ltd. - * - * Author: Valentin Raevsky <valentin@compulab.co.il> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/sound/fsl-imx-audmux.h> -#include "imx6q.dtsi" - -/ { - model = "CompuLab CM-FX6"; - compatible = "compulab,cm-fx6", "fsl,imx6q"; - - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0x80000000>; - }; - - leds { - compatible = "gpio-leds"; - - heartbeat-led { - label = "Heartbeat"; - gpios = <&gpio2 31 0>; - linux,default-trigger = "heartbeat"; - }; - }; - - awnh387_pwrseq: pwrseq { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwrseq>; - compatible = "mmc-pwrseq-sd8787"; - powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; - }; - - reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { - compatible = "regulator-fixed"; - regulator-name = "regulator-pcie-power-on-gpio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; - }; - - reg_usb_h1_vbus: usb_h1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sound-analog { - compatible = "simple-audio-card"; - simple-audio-card,name = "On-board analog audio"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Line", "Line Out", - "Microphone", "Mic Jack", - "Line", "Line In"; - simple-audio-card,routing = - "Headphone Jack", "RHPOUT", - "Headphone Jack", "LHPOUT", - "MICIN", "Mic Bias", - "Mic Bias", "Mic Jack"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sound_master>; - simple-audio-card,frame-master = <&sound_master>; - simple-audio-card,bitclock-inversion; - - sound_master: simple-audio-card,cpu { - sound-dai = <&ssi2>; - system-clock-frequency = <2822400>; - }; - - simple-audio-card,codec { - sound-dai = <&wm8731>; - }; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; - - ssi2 { - fsl,audmux-port = <1>; - fsl,port-config = < - (IMX_AUDMUX_V2_PTCR_RCLKDIR | - IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) | - IMX_AUDMUX_V2_PTCR_TCLKDIR | - IMX_AUDMUX_V2_PTCR_TCSEL(3)) - IMX_AUDMUX_V2_PDCR_RXDSEL(3) - >; - }; - - audmux4 { - fsl,audmux-port = <3>; - fsl,port-config = < - (IMX_AUDMUX_V2_PTCR_TFSDIR | - IMX_AUDMUX_V2_PTCR_TFSEL(1) | - IMX_AUDMUX_V2_PTCR_RCLKDIR | - IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) | - IMX_AUDMUX_V2_PTCR_TCLKDIR | - IMX_AUDMUX_V2_PTCR_TCSEL(1)) - IMX_AUDMUX_V2_PDCR_RXDSEL(1) - >; - }; -}; - -&cpu0 { - /* - * Although the imx6q fuse indicates that 1.2GHz operation is possible, - * the module behaves unstable at this frequency. Hence, remove the - * 1.2GHz operation point here. - */ - operating-points = < - /* kHz uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 975000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC-PU uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 1175000 - >; -}; - -&cpu1 { - /* - * Although the imx6q fuse indicates that 1.2GHz operation is possible, - * the module behaves unstable at this frequency. Hence, remove the - * 1.2GHz operation point here. - */ - operating-points = < - /* kHz uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 975000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC-PU uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 1175000 - >; -}; - -&cpu2 { - /* - * Although the imx6q fuse indicates that 1.2GHz operation is possible, - * the module behaves unstable at this frequency. Hence, remove the - * 1.2GHz operation point here. - */ - operating-points = < - /* kHz uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 975000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC-PU uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 1175000 - >; -}; - -&cpu3 { - /* - * Although the imx6q fuse indicates that 1.2GHz operation is possible, - * the module behaves unstable at this frequency. Hence, remove the - * 1.2GHz operation point here. - */ - operating-points = < - /* kHz uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 975000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC-PU uV */ - 996000 1250000 - 852000 1250000 - 792000 1175000 - 396000 1175000 - >; -}; - -&ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p", "jedec,spi-nor"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - clock-frequency = <100000>; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - wm8731: codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8731"; - reg = <0x1a>; - }; -}; - -&iomuxc { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x17059 - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x17059 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x17059 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x17059 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - >; - }; - - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 - >; - }; - - pinctrl_pwrseq: pwrseqgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 - >; - }; - - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 - MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 - >; - }; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - vpcie-supply = <®_pcie_power_on_gpio>; - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spdif>; - status = "okay"; -}; - -&ssi2 { - assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>, - <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <0>, <786432000>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - dr_mode = "otg"; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - mmc-pwrseq = <&awnh387_pwrseq>; - non-removable; - /* - * If the OS probes the Bluetooth AMP function advertised on this bus - * but the firmware in place does not support it, the WiFi/BT module - * gets unresponsive. - * Users who configured their OS properly can enable this node to gain - * WiFi and/or plain Bluetooth support. - */ - status = "disabled"; -}; |