diff options
Diffstat (limited to 'src/arm/imx6q-dmo-edmqmx6.dts')
| -rw-r--r-- | src/arm/imx6q-dmo-edmqmx6.dts | 481 |
1 files changed, 0 insertions, 481 deletions
diff --git a/src/arm/imx6q-dmo-edmqmx6.dts b/src/arm/imx6q-dmo-edmqmx6.dts deleted file mode 100644 index 9591848cbd37..000000000000 --- a/src/arm/imx6q-dmo-edmqmx6.dts +++ /dev/null @@ -1,481 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2013 Data Modul AG - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "imx6q.dtsi" - -/ { - model = "Data Modul eDM-QMX6 Board"; - compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; - - chosen { - stdout-path = &uart2; - }; - - aliases { - gpio7 = &stmpe_gpio1; - gpio8 = &stmpe_gpio2; - stmpe-i2c0 = &stmpe1; - stmpe-i2c1 = &stmpe2; - }; - - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0x80000000>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usb_otg_switch: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg_switch"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio7 12 0>; - regulator-boot-on; - regulator-always-on; - }; - - reg_usb_host1: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_host1_en"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 31 0>; - enable-active-high; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - led-blue { - label = "blue"; - gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-green { - label = "green"; - gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>; - }; - - led-pink { - label = "pink"; - gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>; - }; - - led-red { - label = "red"; - gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1>; - status = "okay"; -}; - -&ecspi5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi5>; - cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - status = "okay"; - - flash: flash@0 { - compatible = "m25p80", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-supply = <&vgen2_1v2_eth>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2 - &pinctrl_stmpe1 - &pinctrl_stmpe2 - &pinctrl_pfuze>; - status = "okay"; - - pmic: pfuze100@8 { - compatible = "fsl,pfuze100"; - reg = <0x08>; - interrupt-parent = <&gpio3>; - interrupts = <20 8>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - }; - - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-always-on; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_1v2_eth: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vdd_high_in: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - stmpe1: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <30 0>; - interrupt-parent = <&gpio3>; - vcc-supply = <&sw2_reg>; - vio-supply = <&sw2_reg>; - - stmpe_gpio1: stmpe_gpio { - #gpio-cells = <2>; - compatible = "st,stmpe-gpio"; - }; - }; - - stmpe2: stmpe1601@44 { - compatible = "st,stmpe1601"; - reg = <0x44>; - interrupts = <2 0>; - interrupt-parent = <&gpio5>; - vcc-supply = <&sw2_reg>; - vio-supply = <&sw2_reg>; - - stmpe_gpio2: stmpe_gpio { - #gpio-cells = <2>; - compatible = "st,stmpe-gpio"; - }; - }; - - temp1: ad7414@4c { - compatible = "ad,ad7414"; - reg = <0x4c>; - }; - - temp2: ad7414@4d { - compatible = "ad,ad7414"; - reg = <0x4d>; - }; - - rtc: m41t62@68 { - compatible = "st,m41t62"; - reg = <0x68>; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - imx6q-dmo-edmqmx6 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000 - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000 - >; - }; - - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 - >; - }; - - pinctrl_ecspi5: ecspi5rp-1 { - fsl,pins = < - MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 - MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 - MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1 - >; - }; - - pinctrl_pfuze: pfuze100grp1 { - fsl,pins = < - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 - >; - }; - - pinctrl_stmpe1: stmpe1grp { - fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; - }; - - pinctrl_stmpe2: stmpe2grp { - fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; - }; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_host1>; - disable-over-current; - dr_mode = "host"; - status = "okay"; -}; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; - -&usdhc4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4>; - vmmc-supply = <®_3p3v>; - non-removable; - bus-width = <8>; - status = "okay"; -}; |