diff options
Diffstat (limited to 'src/arm/imx6q-h100.dts')
| -rw-r--r-- | src/arm/imx6q-h100.dts | 382 |
1 files changed, 0 insertions, 382 deletions
diff --git a/src/arm/imx6q-h100.dts b/src/arm/imx6q-h100.dts deleted file mode 100644 index 6406ade14f57..000000000000 --- a/src/arm/imx6q-h100.dts +++ /dev/null @@ -1,382 +0,0 @@ -/* - * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "imx6q.dtsi" -#include "imx6qdl-sr-som.dtsi" -#include "imx6qdl-sr-som-brcm.dtsi" - -/ { - model = "Auvidea H100"; - compatible = "auvidea,h100", "fsl,imx6q"; - - /* Will be filled by the bootloader */ - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0>; - }; - - aliases { - rtc0 = &rtc; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = &uart2; - }; - - hdmi_osc: hdmi-osc { - compatible = "fixed-clock"; - clock-output-names = "hdmi-osc"; - clock-frequency = <27000000>; - #clock-cells = <0>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_leds>; - - led0: led-power { - label = "power"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - led1: led-stream { - label = "stream"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led2: led-rec { - label = "rec"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_hdmi: regulator-hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_reg_hdmi>; - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; - regulator-name = "V_HDMI"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usbh1_vbus: regulator-usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_usbh1_vbus>; - regulator-name = "USB_H1_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: regulator-usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_usbotg_vbus>; - regulator-name = "USB_OTG_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - sound-sgtl5000 { - compatible = "fsl,imx-audio-sgtl5000"; - model = "H100 on-board codec"; - audio-codec = <&sgtl5000>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-ext-port = <5>; - mux-int-port = <1>; - ssi-controller = <&ssi1>; - }; -}; - -&audmux { - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_hdmi>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_i2c1>; - status = "okay"; - - eeprom: 24c02@51 { - compatible = "microchip,24c02", "atmel,24c02"; - reg = <0x51>; - }; - - rtc: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - - sgtl5000: sgtl5000@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_sgtl5000>; - clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - }; - - tc358743: tc358743@f { - compatible = "toshiba,tc358743"; - reg = <0x0f>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_tc358743>; - clocks = <&hdmi_osc>; - clock-names = "refclk"; - reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; - /* IRQ has a wrong pull resistor which renders it useless */ - - port { - tc358743_out: endpoint { - remote-endpoint = <&mipi_csi2_in>; - data-lanes = <1 2 3 4>; - clock-lanes = <0>; - clock-noncontinuous; - link-frequencies = /bits/ 64 <297000000>; - }; - }; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_i2c2>; - status = "okay"; -}; - -&iomuxc { - h100 { - pinctrl_h100_hdmi: h100-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_h100_i2c1: h100-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_h100_i2c2: h100-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_h100_leds: pinctrl-h100-leds { - fsl,pins = < - MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 - >; - }; - - pinctrl_h100_reg_hdmi: h100-reg-hdmi { - fsl,pins = < - MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 - >; - }; - - pinctrl_h100_sgtl5000: h100-sgtl5000 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 - MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 - MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 - MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 - >; - }; - - pinctrl_h100_tc358743: h100-tc358743 { - fsl,pins = < - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 - >; - }; - - pinctrl_h100_uart2: h100-uart2 { - fsl,pins = < - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - >; - }; - - pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; - - pinctrl_h100_usbotg_id: hummingboard-usbotg-id { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 - >; - }; - - pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 - >; - }; - - pinctrl_h100_usdhc2: h100-usdhc2 { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 - >; - }; - - pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 - >; - }; - - pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 - MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 - >; - }; - }; -}; - -&mipi_csi { - status = "okay"; - - port { - mipi_csi2_in: endpoint { - remote-endpoint = <&tc358743_out>; - data-lanes = <1 2 3 4>; - clock-lanes = <0>; - clock-noncontinuous; - link-frequencies = /bits/ 64 <297000000>; - }; - }; -}; - -&ssi1 { - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_uart2>; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <®_usbh1_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_h100_usdhc2>; - pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>; - vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - status = "okay"; -}; |