1 files changed, 0 insertions, 98 deletions
diff --git a/src/arm/omap3-cm-t3730.dts b/src/arm/omap3-cm-t3730.dts
deleted file mode 100644
index e1b1a047f77a..000000000000
--- a/src/arm/omap3-cm-t3730.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for CompuLab CM-T3730
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-cm-t3x30.dtsi"
-
-/ {
-	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vw1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
-		startup-delay-us = <20000>;
-		enable-active-high;
-	};
-
-	wl12xx_vaux2: wl12xx_vaux2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271_vaux2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vaux2>;
-	};
-};
-
-&omap3_pmx_wkup {
-	dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	vqmmc-supply = <&wl12xx_vaux2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins_common
-		&dss_dpi_pins_cm_t3730
-	>;
-};
-