diff options
Diffstat (limited to 'src/arm/omap3-n900.dts')
| -rw-r--r-- | src/arm/omap3-n900.dts | 201 |
1 files changed, 139 insertions, 62 deletions
diff --git a/src/arm/omap3-n900.dts b/src/arm/omap3-n900.dts index 60403273f83e..74d8f7eb5563 100644 --- a/src/arm/omap3-n900.dts +++ b/src/arm/omap3-n900.dts @@ -9,13 +9,34 @@ /dts-v1/; -#include "omap34xx-hs.dtsi" +#include "omap34xx.dtsi" #include <dt-bindings/input/input.h> +/* + * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall + * for omap AES HW crypto support. When linux kernel try to access memory of AES + * blocks then kernel receive "Unhandled fault: external abort on non-linefetch" + * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no + * crash anymore) omap AES support will be disabled for all Nokia N900 devices. + * There is "unofficial" version of bootloader which enables AES in L3 firewall + * but it is not widely used and to prevent kernel crash rather AES is disabled. + * There is also no runtime detection code if AES is disabled in L3 firewall... + */ +&aes { + status = "disabled"; +}; + / { model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; + aliases { + i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -46,28 +67,28 @@ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ linux,input-type = <5>; /* EV_SW */ linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ - gpio-key,wakeup; + wakeup-source; }; camera_focus { label = "Camera Focus"; gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ - gpio-key,wakeup; + wakeup-source; }; camera_capture { label = "Camera Capture"; gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ linux,code = <0xd4>; /* KEY_CAMERA */ - gpio-key,wakeup; + wakeup-source; }; lock_button { label = "Lock Button"; gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ linux,code = <0x98>; /* KEY_SCREENLOCK */ - gpio-key,wakeup; + wakeup-source; }; keypad_slide { @@ -75,7 +96,7 @@ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ linux,input-type = <5>; /* EV_SW */ linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ - gpio-key,wakeup; + wakeup-source; }; proximity_sensor { @@ -128,15 +149,15 @@ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */ - 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ >; }; @@ -177,22 +198,22 @@ i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ - 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ - 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; @@ -204,85 +225,85 @@ mcspi4_pins: pinmux_mcspi4_pins { pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ - 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ - 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ - 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ - 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ - 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ - 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ >; }; acx565akm_pins: pinmux_acx565akm_pins { pinctrl-single,pins = < - 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ >; }; dss_sdi_pins: pinmux_dss_sdi_pins { pinctrl-single,pins = < - 0x0c0 (PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ - 0x0c2 (PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ - 0x0c4 (PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ - 0x0c6 (PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ - 0x0d8 (PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ - 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ >; }; wl1251_pins: pinmux_wl1251 { pinctrl-single,pins = < - 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ - 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ + OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ >; }; ssi_pins: pinmux_ssi { pinctrl-single,pins = < - 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ - 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ - 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ - 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ - 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ - 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ - 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ >; }; modem_pins: pinmux_modem { pinctrl-single,pins = < - 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ - 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ - 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ - 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ - 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ >; }; }; @@ -477,6 +498,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <1>; }; tlv320aic3x_aux: tlv320aic3x@19 { @@ -488,6 +511,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <2>; }; tsl2563: tsl2563@29 { @@ -602,6 +627,58 @@ pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; + + lis302dl: lis3lv02d@1d { + compatible = "st,lis3lv02d"; + reg = <0x1d>; + + Vdd-supply = <&vaux1>; + Vdd_IO-supply = <&vio>; + + interrupt-parent = <&gpio6>; + interrupts = <21 20>; /* 181 and 180 */ + + /* click flags */ + st,click-single-x; + st,click-single-y; + st,click-single-z; + + /* Limits are 0.5g * value */ + st,click-threshold-x = <8>; + st,click-threshold-y = <8>; + st,click-threshold-z = <10>; + + /* Click must be longer than time limit */ + st,click-time-limit = <9>; + + /* Kind of debounce filter */ + st,click-latency = <50>; + + /* Interrupt line 2 for click detection */ + st,irq2-click; + + st,wakeup-x-hi; + st,wakeup-y-hi; + st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ + + st,wakeup2-z-hi; + st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */ + + st,hipass1-disable; + st,hipass2-disable; + + st,axis-x = <1>; /* LIS3_DEV_X */ + st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */ + st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ + + st,min-limit-x = <(-32)>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + + st,max-limit-x = <(-3)>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; + }; }; &mmc1 { @@ -704,7 +781,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; @@ -755,8 +832,8 @@ touchscreen-fuzz-x = <4>; touchscreen-fuzz-y = <7>; touchscreen-fuzz-pressure = <2>; - touchscreen-max-x = <4096>; - touchscreen-max-y = <4096>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; touchscreen-max-pressure = <2048>; ti,x-plate-ohms = <280>; |