1 files changed, 0 insertions, 141 deletions
diff --git a/src/arm/qcom-pm8226.dtsi b/src/arm/qcom-pm8226.dtsi
deleted file mode 100644
index 46ba84f86c9f..000000000000
--- a/src/arm/qcom-pm8226.dtsi
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-	pm8226_0: pm8226@0 {
-		compatible = "qcom,pm8226", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pon@800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x800>;
-
-			pwrkey {
-				compatible = "qcom,pm8941-pwrkey";
-				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_POWER>;
-			};
-
-			pm8226_resin: resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				status = "disabled";
-			};
-		};
-
-		smbb: charger@1000 {
-			compatible = "qcom,pm8226-charger";
-			reg = <0x1000>;
-			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "chg-done",
-					  "chg-fast",
-					  "chg-trkl",
-					  "bat-temp-ok",
-					  "bat-present",
-					  "chg-gone",
-					  "usb-valid",
-					  "dc-valid";
-
-			chg_otg: otg-vbus { };
-		};
-
-		pm8226_vadc: adc@3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			adc-chan@7 {
-				reg = <VADC_VSYS>;
-				qcom,pre-scaling = <1 3>;
-				label = "vph_pwr";
-			};
-			adc-chan@8 {
-				reg = <VADC_DIE_TEMP>;
-				label = "die_temp";
-			};
-			adc-chan@9 {
-				reg = <VADC_REF_625MV>;
-				label = "ref_625mv";
-			};
-			adc-chan@a {
-				reg = <VADC_REF_1250MV>;
-				label = "ref_1250mv";
-			};
-			adc-chan@e {
-				reg = <VADC_GND_REF>;
-			};
-			adc-chan@f {
-				reg = <VADC_VDD_VADC>;
-			};
-		};
-
-		pm8226_iadc: adc@3600 {
-			compatible = "qcom,pm8226-iadc", "qcom,spmi-iadc";
-			reg = <0x3600>;
-			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>, <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pm8226_mpps: mpps@a000 {
-			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8226_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm8226_gpios: gpio@c000 {
-			compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8226_gpios 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8226_1: pm8226@1 {
-		compatible = "qcom,pm8226", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8226_spmi_regulators: regulators {
-			compatible = "qcom,pm8226-regulators";
-		};
-
-		pm8226_vib: vibrator@c000 {
-			compatible = "qcom,pm8916-vib";
-			reg = <0xc000>;
-			status = "disabled";
-		};
-	};
-};