diff options
Diffstat (limited to 'src/arm/qcom/qcom-msm8960.dtsi')
| -rw-r--r-- | src/arm/qcom/qcom-msm8960.dtsi | 407 |
1 files changed, 407 insertions, 0 deletions
diff --git a/src/arm/qcom/qcom-msm8960.dtsi b/src/arm/qcom/qcom-msm8960.dtsi new file mode 100644 index 000000000000..fa2013388d99 --- /dev/null +++ b/src/arm/qcom/qcom-msm8960.dtsi @@ -0,0 +1,407 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,lcc-msm8960.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm MSM8960"; + compatible = "qcom,msm8960"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_PPI 14 0x304>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 10 0x304>; + qcom,no-pc-write; + }; + + clocks { + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "cxo_board"; + }; + + pxo_board: pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "pxo_board"; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer", + "qcom,msm-timer"; + interrupts = <GIC_PPI 1 0x301>, + <GIC_PPI 2 0x301>, + <GIC_PPI 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>; + cpu-offset = <0x80000>; + }; + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", "pxo", "pll4"; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-msm8960"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; + }; + + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + }; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi5_serial: serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic { + compatible = "qcom,pm8921"; + interrupt-parent = <&msmgpio>; + interrupts = <104 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 IRQ_TYPE_EDGE_RISING>, + <51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>, + <75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 IRQ_TYPE_EDGE_RISING>; + reg = <0x11d>; + allow-set-time; + }; + }; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; + + gsbi1: gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; + reg = <0x16000000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi1_spi: spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16080000 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <24000000>; + cs-gpios = <&msmgpio 8 0>; + + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + usb1: usb@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x200>, + <0x12500200 0x200>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS1_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS1_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs1_phy>; + phy-names = "usb-phy"; + #reset-cells = <1>; + status = "disabled"; + + ulpi { + usb_hs1_phy: phy { + compatible = "qcom,usb-hs-phy-msm8960", + "qcom,usb-hs-phy"; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb1 0>; + reset-names = "por"; + #phy-cells = <0>; + }; + }; + }; + }; +}; |