diff options
Diffstat (limited to 'src/arm/r8a7791-koelsch.dts')
| -rw-r--r-- | src/arm/r8a7791-koelsch.dts | 157 |
1 files changed, 142 insertions, 15 deletions
diff --git a/src/arm/r8a7791-koelsch.dts b/src/arm/r8a7791-koelsch.dts index da59c2844b8a..5405d337d744 100644 --- a/src/arm/r8a7791-koelsch.dts +++ b/src/arm/r8a7791-koelsch.dts @@ -50,6 +50,8 @@ aliases { serial0 = &scif0; serial1 = &scif1; + i2c9 = &gpioi2c1; + i2c12 = &i2cexio1; }; chosen { @@ -170,7 +172,7 @@ }; }; - vcc_sdhi0: regulator@0 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -181,7 +183,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@1 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -194,7 +196,7 @@ 1800000 0>; }; - vcc_sdhi1: regulator@2 { + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -205,7 +207,7 @@ enable-active-high; }; - vccq_sdhi1: regulator@3 { + vccq_sdhi1: regulator-vccq-sdhi1 { compatible = "regulator-gpio"; regulator-name = "SDHI1 VccQ"; @@ -218,7 +220,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@4 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -229,7 +231,7 @@ enable-active-high; }; - vccq_sdhi2: regulator@5 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -265,12 +267,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -287,6 +300,29 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + gpioi2c1: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */ + &gpio7 15 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + + /* + * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA). + * A fallback to GPIO is provided. + */ + i2cexio1: i2c-12 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c1>, <&gpioi2c1>; + i2c-bus-name = "i2c-exio1"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -322,6 +358,11 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + i2c2_pins: i2c2 { groups = "i2c2"; function = "i2c2"; @@ -332,12 +373,12 @@ function = "du"; }; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; }; - scif1_pins: serial1 { + scif1_pins: scif1 { groups = "scif1_data_d"; function = "scif1"; }; @@ -360,24 +401,45 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; }; sdhi2_pins: sd2 { groups = "sdhi2_data4", "sdhi2_ctrl"; function = "sdhi2"; + power-source = <3300>; }; - qspi_pins: spi0 { + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; - msiof0_pins: spi1 { + msiof0_pins: msiof0 { groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", "msiof0_tx"; function = "msiof0"; @@ -393,6 +455,11 @@ function = "usb1"; }; + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; @@ -454,33 +521,40 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; @@ -538,6 +612,11 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "i2c-exio1"; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -590,7 +669,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -672,6 +778,27 @@ cpu0-supply = <&vdd_dvfs>; }; +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + /* composite video input */ &vin1 { status = "okay"; |