1 files changed, 150 insertions, 0 deletions
diff --git a/src/arm/renesas/r7s72100-genmai.dts b/src/arm/renesas/r7s72100-genmai.dts
new file mode 100644
index 000000000000..1e8447176b10
--- /dev/null
+++ b/src/arm/renesas/r7s72100-genmai.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+
+	scif2_pins: serial2 {
+		/* P3_0 as TxD2; P3_2 as RxD2 */
+		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+	};
+
+	i2c2_pins: i2c2 {
+		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
+		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,2,3,5 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
+			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
+			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
+			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
+			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
+			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
+			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
+			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
+			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
+			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
+			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
+			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
+			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
+			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
+			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
+			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-idb824.2814",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+
+	status = "okay";
+};
+
+&spi4 {
+	status = "okay";
+
+	codec: codec@0 {
+		compatible = "wlf,wm8978";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+	};
+};