diff options
Diffstat (limited to 'src/arm/sama5d3xmb.dtsi')
| -rw-r--r-- | src/arm/sama5d3xmb.dtsi | 48 |
1 files changed, 42 insertions, 6 deletions
diff --git a/src/arm/sama5d3xmb.dtsi b/src/arm/sama5d3xmb.dtsi index b8c6f20e780c..83bee7a3a617 100644 --- a/src/arm/sama5d3xmb.dtsi +++ b/src/arm/sama5d3xmb.dtsi @@ -25,6 +25,8 @@ }; spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; @@ -43,22 +45,50 @@ */ i2c0: i2c@f0014000 { wm8904: wm8904@1a { - compatible = "wm8904"; + compatible = "wlf,wm8904"; reg = <0x1a>; clocks = <&pck0>; clock-names = "mclk"; }; }; + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; }; isi: isi@f0034000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>; + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + }; + }; }; mmc1: mmc@f8000000 { @@ -114,12 +144,17 @@ <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ }; - pinctrl_isi_reset: isi_reset-0 { + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ + }; + + pinctrl_sensor_reset: sensor_reset-0 { atmel,pins = <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ }; - pinctrl_isi_power: isi_power-0 { + pinctrl_sensor_power: sensor_power-0 { atmel,pins = <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ }; @@ -132,6 +167,7 @@ }; dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ status = "okay"; }; @@ -172,7 +208,7 @@ "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", - "MICBIAS", "IN1L", + "Mic", "MICBIAS", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; |