diff options
Diffstat (limited to 'src/arm/sun5i-r8-chip.dts')
-rw-r--r-- | src/arm/sun5i-r8-chip.dts | 276 |
1 files changed, 0 insertions, 276 deletions
diff --git a/src/arm/sun5i-r8-chip.dts b/src/arm/sun5i-r8-chip.dts deleted file mode 100644 index fd37bd1f3920..000000000000 --- a/src/arm/sun5i-r8-chip.dts +++ /dev/null @@ -1,276 +0,0 @@ -/* - * Copyright 2015 Free Electrons - * Copyright 2015 NextThing Co - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun5i-r8.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "NextThing C.H.I.P."; - compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13"; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - serial0 = &uart1; - serial1 = &uart3; - spi0 = &spi2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "chip:white:status"; - gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - mmc0_pwrseq: mmc0_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ - }; - - onewire { - compatible = "w1-gpio"; - gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */ - }; -}; - -&be0 { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - - /* - * The interrupt is routed through the "External Fast - * Interrupt Request" pin (ball G13 of the module) - * directly to the main interrupt controller, without - * any other controller interfering. - */ - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -&battery_power_supply { - status = "okay"; -}; - -&i2c1 { - status = "disabled"; -}; - -&i2c2 { - status = "okay"; - - xio: gpio@38 { - compatible = "nxp,pcf8574a"; - reg = <0x38>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&pio>; - interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - }; -}; - -&mmc0_pins { - bias-pull-up; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&mmc0_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_dcdc2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "cpuvdd"; - regulator-always-on; -}; - -®_dcdc3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1300000>; - regulator-name = "corevdd"; - regulator-always-on; -}; - -®_ldo1 { - regulator-name = "rtcvdd"; -}; - -®_ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; - regulator-always-on; -}; - -/* - * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT - * Chip. - * - * If those are not enabled, the SDIO part will not enumerate, and - * since there's no way currently to pass DT infos to an SDIO device, - * we cannot really do better than this ugly hack for now. - */ -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-1"; - regulator-always-on; -}; - -®_ldo4 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-2"; - regulator-always-on; -}; - -®_ldo5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-1v8"; -}; - -®_usb0_vbus { - vin-supply = <®_vcc5v0>; - gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ - status = "okay"; -}; - -&spi2 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pe_pins>; - status = "disabled"; -}; - -&tcon0 { - status = "okay"; -}; - -&tve0 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pg_pins>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pg_pins>, - <&uart3_cts_rts_pg_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - status = "okay"; - - usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_vcc5v0>; -}; |