diff options
Diffstat (limited to 'src/arm/twl4030_omap3.dtsi')
| -rw-r--r-- | src/arm/twl4030_omap3.dtsi | 39 |
1 files changed, 0 insertions, 39 deletions
diff --git a/src/arm/twl4030_omap3.dtsi b/src/arm/twl4030_omap3.dtsi deleted file mode 100644 index 683419d5c0e5..000000000000 --- a/src/arm/twl4030_omap3.dtsi +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2013 Linaro, Ltd. - */ - -&twl { - pinctrl-names = "default"; - pinctrl-0 = <&twl4030_pins &twl4030_vpins>; -}; - -&omap3_pmx_core { - /* - * On most OMAP3 platforms, the twl4030 IRQ line is connected - * to the SYS_NIRQ line on OMAP. Therefore, configure the - * defaults for the SYS_NIRQ pin here. - */ - twl4030_pins: pinmux_twl4030_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ - >; - }; -}; - -/* - * If your board is not using the I2C4 pins with twl4030, then don't include - * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode - * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and - * sys_nvmode2 signaling. - */ -&omap3_pmx_wkup { - twl4030_vpins: pinmux_twl4030_vpins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ - OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ - OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */ - OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */ - >; - }; -}; |