aboutsummaryrefslogtreecommitdiff
path: root/src/arm64/qcom/apq8016-sbc.dts
diff options
context:
space:
mode:
Diffstat (limited to 'src/arm64/qcom/apq8016-sbc.dts')
-rw-r--r--src/arm64/qcom/apq8016-sbc.dts232
1 files changed, 80 insertions, 152 deletions
diff --git a/src/arm64/qcom/apq8016-sbc.dts b/src/arm64/qcom/apq8016-sbc.dts
index 59860a2223b8..f3d65a606194 100644
--- a/src/arm64/qcom/apq8016-sbc.dts
+++ b/src/arm64/qcom/apq8016-sbc.dts
@@ -18,8 +18,10 @@
compatible = "qcom,apq8016-sbc", "qcom,apq8016";
aliases {
- serial0 = &blsp1_uart2;
- serial1 = &blsp1_uart1;
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ serial1 = &blsp_uart1;
usid0 = &pm8916_0;
i2c0 = &blsp_i2c2;
i2c1 = &blsp_i2c6;
@@ -75,7 +77,7 @@
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+ id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
@@ -101,13 +103,13 @@
button {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
};
};
leds {
pinctrl-names = "default";
- pinctrl-0 = <&msmgpio_leds>,
+ pinctrl-0 = <&tlmm_leds>,
<&pm8916_gpios_leds>,
<&pm8916_mpps_leds>;
@@ -117,7 +119,7 @@
label = "apq8016-sbc:green:user1";
function = LED_FUNCTION_HEARTBEAT;
color = <LED_COLOR_ID_GREEN>;
- gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
@@ -126,7 +128,7 @@
label = "apq8016-sbc:green:user2";
function = LED_FUNCTION_DISK_ACTIVITY;
color = <LED_COLOR_ID_GREEN>;
- gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
@@ -186,14 +188,14 @@
compatible = "adi,adv7533";
reg = <0x39>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
clock-names = "cec";
- pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+ pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
avdd-supply = <&pm8916_l6>;
v1p2-supply = <&pm8916_l6>;
@@ -211,7 +213,7 @@
port@0 {
reg = <0>;
adv7533_in: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
@@ -243,12 +245,12 @@
label = "LS-SPI0";
};
-&blsp1_uart1 {
+&blsp_uart1 {
status = "okay";
label = "LS-UART0";
};
-&blsp1_uart2 {
+&blsp_uart2 {
status = "okay";
label = "LS-UART1";
};
@@ -276,8 +278,8 @@
compatible = "ovti,ov5640";
reg = <0x3b>;
- enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&camera_rear_default>;
@@ -301,12 +303,11 @@
};
};
-&dsi0_out {
- data-lanes = <0 1 2 3>;
- remote-endpoint = <&adv7533_in>;
+&lpass {
+ status = "okay";
};
-&lpass {
+&lpass_codec {
status = "okay";
};
@@ -314,40 +315,78 @@
status = "okay";
};
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&adv7533_in>;
+};
+
&mpss {
status = "okay";
firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
};
+&pm8916_codec {
+ status = "okay";
+ clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "mclk";
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
+&pm8916_rpm_regulators {
+ /*
+ * The 96Boards specification expects a 1.8V power rail on the low-speed
+ * expansion connector that is able to provide at least 0.18W / 100 mA.
+ * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
+ * must be specified to ensure the regulators are not put in LPM where they
+ * would only provide 5 mA.
+ */
+ pm8916_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <50000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+ pm8916_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <50000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
- cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
&sound {
status = "okay";
- pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
- pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+ pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
pinctrl-names = "default", "sleep";
model = "DB410c";
audio-routing =
@@ -370,7 +409,7 @@
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
- sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+ sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
};
};
@@ -380,7 +419,7 @@
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
- sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+ sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
};
};
};
@@ -398,13 +437,6 @@
extcon = <&usb_id>;
};
-&wcd_codec {
- clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
- clock-names = "mclk";
- qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
- qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-};
-
&wcnss {
status = "okay";
firmware-name = "qcom/apq8016/wcnss.mbn";
@@ -441,130 +473,19 @@
&stm { status = "okay"; };
&tpiu { status = "okay"; };
-&smd_rpm_regulators {
- vdd_l1_l2_l3-supply = <&pm8916_s3>;
- vdd_l4_l5_l6-supply = <&pm8916_s4>;
- vdd_l7-supply = <&pm8916_s4>;
-
- s3 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1562000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l1 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1525000>;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l5 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l8 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l9 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l10 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l11 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l13 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l14 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- /**
- * 1.8v required on LS expansion
- * for mezzanine boards
- */
- l15 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- regulator-always-on;
- };
-
- l16 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-
- l17 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l18 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
- };
-};
-
/*
* 2mA drive strength is not enough when connecting multiple
* I2C devices with different pull up resistors.
*/
-&i2c2_default {
+&blsp_i2c2_default {
drive-strength = <16>;
};
-&i2c4_default {
+&blsp_i2c4_default {
drive-strength = <16>;
};
-&i2c6_default {
+&blsp_i2c6_default {
drive-strength = <16>;
};
@@ -592,7 +513,7 @@
* ones actually used for GPIO.
*/
-&msmgpio {
+&tlmm {
gpio-line-names =
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
@@ -717,7 +638,14 @@
"USR_LED_2_CTRL", /* GPIO 120 */
"SB_HS_ID";
- msmgpio_leds: msmgpio-leds-state {
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tlmm_leds: tlmm-leds-state {
pins = "gpio21", "gpio120";
function = "gpio";
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-18 03:29:15 +0000