diff options
Diffstat (limited to 'src/arm64/qcom/msm8916-gplus-fl8005a.dts')
| -rw-r--r-- | src/arm64/qcom/msm8916-gplus-fl8005a.dts | 151 |
1 files changed, 30 insertions, 121 deletions
diff --git a/src/arm64/qcom/msm8916-gplus-fl8005a.dts b/src/arm64/qcom/msm8916-gplus-fl8005a.dts index 525ec76efeeb..f4dbc515c47a 100644 --- a/src/arm64/qcom/msm8916-gplus-fl8005a.dts +++ b/src/arm64/qcom/msm8916-gplus-fl8005a.dts @@ -14,7 +14,9 @@ chassis-type = "tablet"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -24,8 +26,8 @@ flash-led-controller { /* Actually qcom,leds-gpio-flash */ compatible = "sgmicro,sgm3140"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&camera_flash_default>; pinctrl-names = "default"; @@ -45,7 +47,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -59,21 +61,21 @@ led-red { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_RED>; - gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; led-green { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&usb_id_default>; pinctrl-names = "default"; }; @@ -87,10 +89,10 @@ compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -105,7 +107,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -114,24 +116,27 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -153,110 +158,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; @@ -278,6 +180,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; |