diff options
Diffstat (limited to 'src/arm64/qcom/sc7180-idp.dts')
| -rw-r--r-- | src/arm64/qcom/sc7180-idp.dts | 36 |
1 files changed, 30 insertions, 6 deletions
diff --git a/src/arm64/qcom/sc7180-idp.dts b/src/arm64/qcom/sc7180-idp.dts index 70fd9ff8dfa2..c3bdd3295c02 100644 --- a/src/arm64/qcom/sc7180-idp.dts +++ b/src/arm64/qcom/sc7180-idp.dts @@ -80,11 +80,17 @@ reg = <0x0 0x94400000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; }; &apps_rsc { - pm6150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -206,7 +212,7 @@ }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -304,7 +310,7 @@ pinctrl-names = "default"; pinctrl-0 = <&disp_pins>; - reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; @@ -370,8 +376,26 @@ &remoteproc_mpss { status = "okay"; compatible = "qcom,sc7180-mss-pil"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; - memory-region = <&mba_mem &mpss_mem>; + memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; }; &sdhc_1 { @@ -406,7 +430,7 @@ pinctrl-names = "default", "sleep"; pinctrl-1 = <&qup_uart3_sleep>; - bluetooth: wcn3990-bt { + bluetooth: bluetooth { compatible = "qcom,wcn3990-bt"; vddio-supply = <&vreg_l10a_1p8>; vddxo-supply = <&vreg_l1c_1p8>; @@ -467,7 +491,7 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ -&pm6150l_gpio { +&pm6150l_gpios { disp_pins: disp-state { pinconf { pins = "gpio3"; |