diff options
Diffstat (limited to 'src/arm64/qcom/sc8280xp-crd.dts')
| -rw-r--r-- | src/arm64/qcom/sc8280xp-crd.dts | 123 |
1 files changed, 119 insertions, 4 deletions
diff --git a/src/arm64/qcom/sc8280xp-crd.dts b/src/arm64/qcom/sc8280xp-crd.dts index 5b25d54b9591..b566e403d1db 100644 --- a/src/arm64/qcom/sc8280xp-crd.dts +++ b/src/arm64/qcom/sc8280xp-crd.dts @@ -64,7 +64,7 @@ reg = <1>; pmic_glink_con0_ss: endpoint { - remote-endpoint = <&mdss0_dp0_out>; + remote-endpoint = <&usb_0_qmpphy_out>; }; }; @@ -99,7 +99,7 @@ reg = <1>; pmic_glink_con1_ss: endpoint { - remote-endpoint = <&mdss0_dp1_out>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; @@ -210,6 +210,11 @@ }; reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -308,6 +313,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l7c: ldo7 { regulator-name = "vreg_l7c"; regulator-min-microvolt = <2504000>; @@ -318,6 +330,13 @@ RPMH_REGULATOR_MODE_HPM>; }; + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l13c: ldo13 { regulator-name = "vreg_l13c"; regulator-min-microvolt = <3072000>; @@ -376,6 +395,15 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; + }; +}; + &mdss0 { status = "okay"; }; @@ -386,7 +414,7 @@ &mdss0_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con0_ss>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { @@ -395,7 +423,7 @@ &mdss0_dp1_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con1_ss>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { @@ -600,6 +628,19 @@ status = "okay"; }; +&sdc2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + &uart17 { compatible = "qcom,geni-debug-uart"; @@ -644,9 +685,19 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + status = "okay"; }; +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + &usb_0_role_switch { remote-endpoint = <&pmic_glink_con0_hs>; }; @@ -671,9 +722,19 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + orientation-switch; + status = "okay"; }; +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + &usb_1_role_switch { remote-endpoint = <&pmic_glink_con1_hs>; }; @@ -842,6 +903,60 @@ }; }; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; |