diff options
Diffstat (limited to 'src/arm64/qcom/sm6115.dtsi')
| -rw-r--r-- | src/arm64/qcom/sm6115.dtsi | 1248 |
1 files changed, 1162 insertions, 86 deletions
diff --git a/src/arm64/qcom/sm6115.dtsi b/src/arm64/qcom/sm6115.dtsi index 572bf04adf90..fbd67d2c8d78 100644 --- a/src/arm64/qcom/sm6115.dtsi +++ b/src/arm64/qcom/sm6115.dtsi @@ -296,6 +296,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; #clock-cells = <1>; }; @@ -343,25 +345,100 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 30>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; tcsr_mutex: hwlock@340000 { compatible = "qcom,tcsr-mutex"; - reg = <0x00340000 0x20000>; + reg = <0x0 0x00340000 0x0 0x20000>; #hwlock-cells = <1>; }; tlmm: pinctrl@500000 { compatible = "qcom,sm6115-tlmm"; - reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>; + reg = <0x0 0x00500000 0x0 0x400000>, + <0x0 0x00900000 0x0 0x400000>, + <0x0 0x00d00000 0x0 0x400000>; reg-names = "west", "south", "east"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&tlmm 0 0 121>; + gpio-ranges = <&tlmm 0 0 114>; /* GPIOs + ufs_reset */ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -557,7 +634,7 @@ gcc: clock-controller@1400000 { compatible = "qcom,gcc-sm6115"; - reg = <0x01400000 0x1f0000>; + reg = <0x0 0x01400000 0x0 0x1f0000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; #clock-cells = <1>; @@ -567,7 +644,7 @@ usb_1_hsphy: phy@1613000 { compatible = "qcom,sm6115-qusb2-phy"; - reg = <0x01613000 0x180>; + reg = <0x0 0x01613000 0x0 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; @@ -581,7 +658,7 @@ qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; - reg = <0x01b40000 0x7000>; + reg = <0x0 0x01b40000 0x0 0x7000>; #address-cells = <1>; #size-cells = <1>; @@ -593,18 +670,18 @@ rng: rng@1b53000 { compatible = "qcom,prng-ee"; - reg = <0x01b53000 0x1000>; + reg = <0x0 0x01b53000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; @@ -618,8 +695,8 @@ tsens0: thermal-sensor@4410000 { compatible = "qcom,sm6115-tsens", "qcom,tsens-v2"; - reg = <0x04411000 0x1ff>, /* TM */ - <0x04410000 0x8>; /* SROT */ + reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */ + <0x0 0x04410000 0x0 0x8>; /* SROT */ #qcom,sensors = <16>; interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; @@ -629,17 +706,19 @@ rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x045f0000 0x7000>; + reg = <0x0 0x045f0000 0x0 0x7000>; }; sram@4690000 { compatible = "qcom,rpm-stats"; - reg = <0x04690000 0x10000>; + reg = <0x0 0x04690000 0x0 0x10000>; }; sdhc_1: mmc@4744000 { compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; reg-names = "hc", "cqhci", "ice"; interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, @@ -648,7 +727,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; @@ -662,14 +741,16 @@ sdhc_2: mmc@4784000 { compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x04784000 0x1000>; + reg = <0x0 0x04784000 0x0 0x1000>; reg-names = "hc"; interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc2_state_on>; @@ -703,7 +784,8 @@ ufs_mem_hc: ufs@4804000 { compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>; + reg-names = "std", "ice"; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -736,19 +818,19 @@ <0 0>, <0 0>, <37500000 150000000>, - <75000000 300000000>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <75000000 300000000>; status = "disabled"; }; ufs_mem_phy: phy@4807000 { compatible = "qcom,sm6115-qmp-ufs-phy"; - reg = <0x04807000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x0 0x04807000 0x0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; @@ -759,16 +841,16 @@ status = "disabled"; ufs_mem_phy_lanes: phy@4807400 { - reg = <0x4807400 0x098>, - <0x4807600 0x130>, - <0x4807c00 0x16c>; + reg = <0x0 0x04807400 0x0 0x098>, + <0x0 0x04807600 0x0 0x130>, + <0x0 0x04807c00 0x0 0x16c>; #phy-cells = <0>; }; }; gpi_dma0: dma-controller@4a00000 { compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0x04a00000 0x60000>; + reg = <0x0 0x04a00000 0x0 0x60000>; interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, @@ -788,19 +870,19 @@ qupv3_id_0: geniqup@4ac0000 { compatible = "qcom,geni-se-qup"; - reg = <0x04ac0000 0x2000>; + reg = <0x0 0x04ac0000 0x0 0x2000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; iommus = <&apps_smmu 0xe3 0x0>; ranges; status = "disabled"; i2c0: i2c@4a80000 { compatible = "qcom,geni-i2c"; - reg = <0x04a80000 0x4000>; + reg = <0x0 0x04a80000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -816,7 +898,7 @@ spi0: spi@4a80000 { compatible = "qcom,geni-spi"; - reg = <0x04a80000 0x4000>; + reg = <0x0 0x04a80000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -832,7 +914,7 @@ i2c1: i2c@4a84000 { compatible = "qcom,geni-i2c"; - reg = <0x04a84000 0x4000>; + reg = <0x0 0x04a84000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -848,7 +930,7 @@ spi1: spi@4a84000 { compatible = "qcom,geni-spi"; - reg = <0x04a84000 0x4000>; + reg = <0x0 0x04a84000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -864,7 +946,7 @@ i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; - reg = <0x04a88000 0x4000>; + reg = <0x0 0x04a88000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -880,7 +962,7 @@ spi2: spi@4a88000 { compatible = "qcom,geni-spi"; - reg = <0x04a88000 0x4000>; + reg = <0x0 0x04a88000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -896,7 +978,7 @@ i2c3: i2c@4a8c000 { compatible = "qcom,geni-i2c"; - reg = <0x04a8c000 0x4000>; + reg = <0x0 0x04a8c000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -912,7 +994,7 @@ spi3: spi@4a8c000 { compatible = "qcom,geni-spi"; - reg = <0x04a8c000 0x4000>; + reg = <0x0 0x04a8c000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -928,7 +1010,7 @@ i2c4: i2c@4a90000 { compatible = "qcom,geni-i2c"; - reg = <0x04a90000 0x4000>; + reg = <0x0 0x04a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -944,7 +1026,7 @@ spi4: spi@4a90000 { compatible = "qcom,geni-spi"; - reg = <0x04a90000 0x4000>; + reg = <0x0 0x04a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -958,9 +1040,18 @@ status = "disabled"; }; + uart4: serial@4a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c5: i2c@4a94000 { compatible = "qcom,geni-i2c"; - reg = <0x04a94000 0x4000>; + reg = <0x0 0x04a94000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -976,7 +1067,7 @@ spi5: spi@4a94000 { compatible = "qcom,geni-spi"; - reg = <0x04a94000 0x4000>; + reg = <0x0 0x04a94000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -993,9 +1084,9 @@ usb_1: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; - reg = <0x04ef8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x0 0x04ef8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, @@ -1021,7 +1112,7 @@ usb_1_dwc3: usb@4e00000 { compatible = "snps,dwc3"; - reg = <0x04e00000 0xcd00>; + reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_1_hsphy>; phy-names = "usb2-phy"; @@ -1038,7 +1129,7 @@ mdss: display-subsystem@5e00000 { compatible = "qcom,sm6115-mdss"; - reg = <0x05e00000 0x1000>; + reg = <0x0 0x05e00000 0x0 0x1000>; reg-names = "mdss"; power-domains = <&dispcc MDSS_GDSC>; @@ -1054,16 +1145,16 @@ iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; mdp: display-controller@5e01000 { compatible = "qcom,sm6115-dpu"; - reg = <0x05e01000 0x8f000>, - <0x05eb0000 0x2008>; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x2008>; reg-names = "mdp", "vbif"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>, @@ -1092,7 +1183,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; }; @@ -1127,9 +1218,9 @@ }; }; - dsi0: dsi@5e94000 { + mdss_dsi0: dsi@5e94000 { compatible = "qcom,dsi-ctrl-6g-qcm2290"; - reg = <0x05e94000 0x400>; + reg = <0x0 0x05e94000 0x0 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -1150,11 +1241,11 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmpd SM6115_VDDCX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -1167,14 +1258,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -1199,11 +1290,11 @@ }; }; - dsi0_phy: phy@5e94400 { + mdss_dsi0_phy: phy@5e94400 { compatible = "qcom,dsi-phy-14nm-2290"; - reg = <0x05e94400 0x100>, - <0x05e94500 0x300>, - <0x05e94800 0x188>; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -1221,20 +1312,632 @@ dispcc: clock-controller@5f00000 { compatible = "qcom,sm6115-dispcc"; - reg = <0x05f00000 0x20000>; + reg = <0x0 0x05f00000 0 0x20000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; + stm@8002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x08002000 0x0 0x1000>, + <0x0 0x0e280000 0x0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in0_in>; + }; + }; + }; + }; + + cti0: cti@8010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08010000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti1: cti@8011000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08011000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti2: cti@8012000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08012000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti3: cti@8013000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08013000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti4: cti@8014000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08014000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti5: cti@8015000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08015000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti6: cti@8016000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08016000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti7: cti@8017000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08017000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti8: cti@8018000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08018000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti9: cti@8019000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08019000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti10: cti@801a000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801a000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti11: cti@801b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801b000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti12: cti@801c000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801c000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti13: cti@801d000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801d000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti14: cti@801e000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801e000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti15: cti@801f000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801f000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + replicator@8046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x08046000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@8047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x08047000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr@8048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x08048000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + funnel@8041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08041000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + port { + funnel_in0_in: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@8042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08042000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + port { + funnel_in1_in: endpoint { + remote-endpoint = <&funnel_apss1_out>; + }; + }; + }; + }; + + funnel@8045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08045000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel_in1_out>; + }; + }; + }; + }; + + etm@9040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09040000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU0>; + + status = "disabled"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_apss0_in0>; + }; + }; + }; + }; + + etm@9140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09140000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU1>; + + status = "disabled"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_apss0_in1>; + }; + }; + }; + }; + + etm@9240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09240000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU2>; + + status = "disabled"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_apss0_in2>; + }; + }; + }; + }; + + etm@9340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09340000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU3>; + + status = "disabled"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_apss0_in3>; + }; + }; + }; + }; + + etm@9440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09440000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU4>; + + status = "disabled"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&funnel_apss0_in4>; + }; + }; + }; + }; + + etm@9540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09540000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU5>; + + status = "disabled"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&funnel_apss0_in5>; + }; + }; + }; + }; + + etm@9640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09640000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU6>; + + status = "disabled"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&funnel_apss0_in6>; + }; + }; + }; + }; + + etm@9740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09740000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU7>; + + status = "disabled"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&funnel_apss0_in7>; + }; + }; + }; + }; + + funnel@9800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x09800000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss0_out: endpoint { + remote-endpoint = <&funnel_apss1_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_apss0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_apss0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_apss0_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_apss0_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + funnel_apss0_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + funnel_apss0_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + funnel_apss0_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + funnel_apss0_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@9810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x09810000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss1_out: endpoint { + remote-endpoint = <&funnel_in1_in>; + }; + }; + }; + + in-ports { + port { + funnel_apss1_in: endpoint { + remote-endpoint = <&funnel_apss0_out>; + }; + }; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; - reg = <0x0c600000 0x80000>; + reg = <0x0 0x0c600000 0x0 0x80000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -1307,7 +2010,7 @@ wifi: wifi@c800000 { compatible = "qcom,wcn3990-wifi"; - reg = <0x0c800000 0x800000>; + reg = <0x0 0x0c800000 0x0 0x800000>; reg-names = "membase"; memory-region = <&wlan_msa_mem>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, @@ -1327,65 +2030,72 @@ status = "disabled"; }; + watchdog@f017000 { + compatible = "qcom,apss-wdt-sm6115", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + }; + apcs_glb: mailbox@f111000 { compatible = "qcom,sm6115-apcs-hmss-global"; - reg = <0x0f111000 0x1000>; + reg = <0x0 0x0f111000 0x0 0x1000>; #mbox-cells = <1>; }; timer@f120000 { compatible = "arm,armv7-timer-mem"; - reg = <0x0f120000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <2>; ranges; clock-frequency = <19200000>; frame@f121000 { - reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; + reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>; frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; frame@f123000 { - reg = <0x0f123000 0x1000>; + reg = <0x0 0x0f123000 0x0 0x1000>; frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f124000 { - reg = <0x0f124000 0x1000>; + reg = <0x0 0x0f124000 0x0 0x1000>; frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f125000 { - reg = <0x0f125000 0x1000>; + reg = <0x0 0x0f125000 0x0 0x1000>; frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f126000 { - reg = <0x0f126000 0x1000>; + reg = <0x0 0x0f126000 0x0 0x1000>; frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f127000 { - reg = <0x0f127000 0x1000>; + reg = <0x0 0x0f127000 0x0 0x1000>; frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f128000 { - reg = <0x0f128000 0x1000>; + reg = <0x0 0x0f128000 0x0 0x1000>; frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -1394,7 +2104,8 @@ intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; - reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; @@ -1405,7 +2116,8 @@ cpufreq_hw: cpufreq@f521000 { compatible = "qcom,cpufreq-hw"; - reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>; + reg = <0x0 0x0f521000 0x0 0x1000>, + <0x0 0x0f523000 0x0 0x1000>; reg-names = "freq-domain0", "freq-domain1"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; @@ -1415,6 +2127,370 @@ }; }; + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cdsp-hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu45-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu45_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu45_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu45_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu67-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu67_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu67_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu67_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0123-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu0123_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0123_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0123_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + display-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |