diff options
Diffstat (limited to 'src/arm64/qcom/sm8550-qrd.dts')
| -rw-r--r-- | src/arm64/qcom/sm8550-qrd.dts | 50 |
1 files changed, 47 insertions, 3 deletions
diff --git a/src/arm64/qcom/sm8550-qrd.dts b/src/arm64/qcom/sm8550-qrd.dts index 2c09ce8aeafd..eef811def39b 100644 --- a/src/arm64/qcom/sm8550-qrd.dts +++ b/src/arm64/qcom/sm8550-qrd.dts @@ -14,7 +14,8 @@ #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 QRD"; @@ -23,6 +24,7 @@ aliases { serial0 = &uart7; + serial1 = &uart14; }; wcd938x: audio-codec { @@ -75,6 +77,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -765,6 +768,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sm8550/adsp.mbn", "qcom/sm8550/adsp_dtb.mbn"; @@ -842,6 +849,21 @@ &tlmm { gpio-reserved-ranges = <32 8>; + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio82"; + function = "gpio"; + bias-pull-down; + }; + }; + sde_dsi_active: sde-dsi-active-state { pins = "gpio133"; function = "gpio"; @@ -883,14 +905,36 @@ status = "okay"; }; +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s4e_0p95>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa0p8-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p9-supply = <&vreg_s6g_1p86>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; - vccq2-supply = <&vreg_l3g_1p2>; - vccq2-max-microamp = <100>; + vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; }; |