diff options
Diffstat (limited to 'src/arm64/rockchip/rk3326-odroid-go.dtsi')
| -rw-r--r-- | src/arm64/rockchip/rk3326-odroid-go.dtsi | 43 |
1 files changed, 29 insertions, 14 deletions
diff --git a/src/arm64/rockchip/rk3326-odroid-go.dtsi b/src/arm64/rockchip/rk3326-odroid-go.dtsi index fbc6bfbaa5c1..80fc53c807a4 100644 --- a/src/arm64/rockchip/rk3326-odroid-go.dtsi +++ b/src/arm64/rockchip/rk3326-odroid-go.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> #include "rk3326.dtsi" @@ -113,21 +114,35 @@ }; }; - leds: gpio-leds { + /* led-1 is wired directly to output of always-on regulator */ + + gpio_led: gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; + pinctrl-0 = <&red_led_pin>; + + red_led: led-3 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + }; - blue_led: led-0 { - label = "blue:heartbeat"; - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + pwm_led: led-controller { + compatible = "pwm-leds"; + + blue_led: led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; linux,default-trigger = "heartbeat"; + max-brightness = <255>; + pwms = <&pwm3 0 25000 0>; }; }; rk817-sound { compatible = "simple-audio-card"; - simple-audio-card,name = "Analog"; + simple-audio-card,name = "rk817_int"; simple-audio-card,format = "i2s"; simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; simple-audio-card,mclk-fs = <256>; @@ -192,14 +207,12 @@ assigned-clocks = <&cru PLL_NPLL>, <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, - <&cru PLL_CPLL>; + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; assigned-clock-rates = <1188000000>, <200000000>, <200000000>, <150000000>, <150000000>, - <100000000>, <200000000>, - <17000000>; + <100000000>, <200000000>; }; &display_subsystem { @@ -222,10 +235,8 @@ internal_display: panel@0 { reg = <0>; backlight = <&backlight>; - iovcc-supply = <&vcc_lcd>; reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; rotation = <270>; - vdd-supply = <&vcc_lcd>; port { mipi_in_panel: endpoint { @@ -467,6 +478,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_1v8>; status = "okay"; @@ -571,8 +586,8 @@ }; leds { - blue_led_pin: blue-led-pin { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + red_led_pin: red-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; |