1 files changed, 0 insertions, 73 deletions
diff --git a/usr.sbin/ppp/README.changes b/usr.sbin/ppp/README.changes
deleted file mode 100644
index 3e4873e5a5f0..000000000000
--- a/usr.sbin/ppp/README.changes
+++ /dev/null
@@ -1,73 +0,0 @@
-This file summarises changes made to ppp that effect
-its configuration.
-
-It does not describe new features, rather it attempts
-to answer any `this used to work, why doesn't it now?'
-questions.
-
-o The `set debug' command was replaced with `set log'.
-o The `set log LCP' command was split into LCP, IPCP and CCP logs.
-o Syslogd is used for logging.  /etc/syslog.conf must be updated.
-o LQR is disabled by default.
-o Openmode is active by default.
-o Users must be a member of group `network' for ppp access.  Furthermore,
-  they must be `allow'ed to run ppp via the `allow' command in the
-  configuration file.
-  For a brief period, ppp could only be run as root.
-o No diagnostic socket is created by default.  The `set server' command
-  must be used.
-o The diagnostic socket password must be specified *only* on the `set
-  server' command line.
-o When `set server' is used to re-select a diagnostic port, all existing
-  diagnostic connections are dropped.
-o pppd-deflate is now called deflate24.
-o Filter IPs of 0.0.0.0 have a default width of 0, not 32.
-o Errors in `add' and `delete' are logged as warnings rather than being
-  written to the TCP/IP log.
-o Any number of diagnostic prompts are allowed, and they are allowed in
-  interactive mode.
-o The default `device' is cuaa1, then cuaa0
-o A password of "*" in ppp.secret causes a passwd database lookup in
-  pap mode.
-o The value of the CONNECT environment variable is logged in the
-  utmp host field in -direct mode.
-o Out-of-sequence FSM packets (IPCP/LCP/CCP) are dropped by default.
-o Reconnect values are used after an LQR timeout.
-o ^C works on the parent in -background mode.
-o The dial/call/open command works asynchronously.  As a result, prompts
-  do not lose control while dialing.
-o The `display' command has been removed.  All information is available
-  with the appropriate `show' command.
-o Msext does not need to be enabled/disabled.  Setting the NBNS (set nbns)
-  will auto enable it.  The DNS side may be enabled/disabled, and if
-  enabled without a `set dns' (was `set ns') will use values from
-  /etc/resolv.conf.
-o Filters are now called `allow', `dial', `in' and `out'.  `set
-  ifilter ...' becomes `set filter in ...' etc.
-o Authname and Authkey may only be `set' in phase DEAD.
-o Set encrypt is no longer necessary.  Ppp will respond to M$CHAP
-  servers correctly if it's built with DES.
-o Throughput statistics are enabled by default.
-o `Set stopped' only has two parameters.  It's no longer possible to
-  have an IPCP stopped timer.
-o `Set timeout' only has one parameter.  Use `set lqrperiod' and `set
-  {lcp,ccp,ipcp,chap,pap}retry' for the other timers.  `show timeout'
-  is also now available using the relevant show commands.
-o `set loopback' is now `enable/disable loopback'.
-o `show auto', `show loopback' and `show mtu' are all part of `show bundle'.
-o `show mru' is part of `show lcp'
-o `show msext' and `show vj' are part of `show ipcp'
-o `show reconnect' and `show redial' are part of `show link'
-o A signal 15 (TERM) will now shut down the link gracefully.
-o A signal 2 (HUP) will drop all links immediately.
-o Signal 30 (USR1) is now ignored.
-o Add & delete commands are not necessary in ppp.linkup if they are
-  `sticky routes' (ie, contain MYADDR or HISADDR).
-o LINK and CARRIER logging are no longer available.
-o Timer based DEBUG messages are now logged in the new TIMER log.
-o Ppp can use tun devices > tun255.
-o Protocol-compressed packets are accepted even if they were denied
-  at LCP negotiation time.
-o Passwords aren't logged when logging the ``set server'' line.
-o Command line options only need enough characters to uniquely identify
-  them.  -a == -auto, -dd == -ddial etc.  -interactive is also allowed.