aboutsummaryrefslogtreecommitdiff
path: root/secure/lib
Commit message (Collapse)AuthorAgeFilesLines
...
* libcrypto: link engines and the legacy provider to libcryptoPierre Pronchery2023-09-163-0/+5
| | | | | | | | | | | | | | | | OpenSSL's legacy provider module and engines need to link to libcrypto.so, as it provides some of the actual implementations of legacy routines. This is a little tricky due to build order issues. Introduce a small hack (LIBCRYPTO_WITHOUT_SUBDIRS) that builds libcrypto.so in its usual early phase without any OpenSSL provider modules or engines. This is intended to restore the test suite; a future change should remove the hack and replace it with a better approach. PR: 254853, 273528 Discussed with: Folks at EuroBSDCon in Coimbra Sponsored by: The FreeBSD Foundation
* libcrypto: Switch back to the generated assembly in sys/crypto/opensslJohn Baldwin2023-08-29145-310557/+5
| | | | | Reviewed by: markj Differential Revision: https://reviews.freebsd.org/D41569
* libcrypto: Add buildasm and cleanasm targetsJohn Baldwin2023-08-292-0/+9
| | | | | | | These targets generate all the assembly files in sys/crypto/openssl. Reviewed by: markj, emaste (earlier version) Differential Revision: https://reviews.freebsd.org/D41590
* libcrypto: Refactor Makefile.asm so it can be run outside of buildenvJohn Baldwin2023-08-291-13/+14
| | | | | | | | | | | | | | | | | | | | | Currently Makefile.asm relies on the current buildenv to set CFLAGS for i386. The current approach also leaves various temporary *.s files around in the current directory. To make this a bit better: - Instead of using CFLAGS from buildenv for i386, define the actual flags the perl scripts need: -DOPENSSL_IA32_SSE2 to enable SSE2. - Change i386 to have the perl scripts write to /dev/stdout to avoid creating temporaries. Previously i386 was generating the temporary files in the OpenSSL contrib src. - Cleanup temporary *.s files in the all target after generating the real *.S files for architectures which need them. - Remove a duplicate rule for aes-armv4.S. Reviewed by: markj Differential Revision: https://reviews.freebsd.org/D41589
* Makefile.asm: Simplify variable expansions in generated headersJohn Baldwin2023-08-291-15/+15
| | | | | | | | The :R:S expressions removed the .pl extension only to add it back again, so just trim them to using :T alone. Reviewed by: Pierre Pronchery <pierre@freebsdfoundation.org>, markj, emaste Differential Revision: https://reviews.freebsd.org/D41588
* Makefile.asm: Drop mention of $FreeBSD$ from instructions.John Baldwin2023-08-221-1/+1
|
* libcrypto: Update assembly build glue for x86 for OpenSSL 3.0.John Baldwin2023-08-222-10/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Notably, define AES_ASM which is required for any AES acceleration (OpenSSL 1.0 gated all AES acceleration on OPENSSL_CPUID_OBJ instead). Enabling this exposed that new assembly files added in OpenSSL 3.0 needed to be included in the build (aes-x86-64.S and aes-586.S). Both of these files supplant both aes_core.c and aes_cbc.c. The last file had to be moved out of the MI SRCS line for aes and into each ASM_* for non-x86. As part of this I audited the generated configdata.pm for amd64, i386, and aarch64 and found the following additional discrepecancies that are fixed here as well: - Enabled BSAES_ASM on amd64 which requires bsase-x86_64.S - Enabled WHIRLPOOL_ASM on amd64 (asm sources already built) - Enabled CMLL_ASM on amd64 and i386 (asm sources already built) aarch64 had no discreprecancies in configdata.pm, and no *.pl asm generators were missing for aarch64 in Makefile.asm. I did not check powerpc or armv7, but for armv7 all of the asm generators seem to be present in Makefile.asm. Reported by: gallatin (AES-GCM using plain software on amd64) Reviewed by: gallatin, ngie, emaste Differential Revision: https://reviews.freebsd.org/D41539
* libcrypto: Generate new files added in OpenSSL 3.0.John Baldwin2023-08-223-0/+11943
| | | | | Reviewed by: gallatin, ngie, emaste Differential Revision: https://reviews.freebsd.org/D41538
* libcrypto: Add new assembly files added in OpenSSL 3.0.John Baldwin2023-08-221-4/+5
| | | | | | | | This only affects amd64 and i386, but in particular includes wrappers for AES encryption/decryption that gate all of the accelerated AES. Reviewed by: gallatin, ngie, emaste Differential Revision: https://reviews.freebsd.org/D41537
* libcrypto: Don't embed $FreeBSD$ in generated assembly filesJohn Baldwin2023-08-221-38/+19
| | | | | Reviewed by: gallatin, ngie, emaste Differential Revision: https://reviews.freebsd.org/D41536
* libcrypto: add rsa_depr.c to the buildEd Maste2023-08-181-1/+1
| | | | | | | | | It provides the RSA_generate_key function, which is deprecated as of 3.0 but is used by various ports. Reviewed by: kbowling Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D41506
* libcrypto: add err_all_legacy.c to the buildEd Maste2023-08-181-1/+1
| | | | | | | | | | It provides the ERR_load_*_strings routines, which are deprecated as of 3.0 but are used by various ports. PR: 272580 Reviewed by: kbowling Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D41505
* Remove $FreeBSD$: one-line sh patternWarner Losh2023-08-1629-29/+0
| | | | Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/
* Remove $FreeBSD$: one-line .c patternWarner Losh2023-08-163-6/+0
| | | | Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
* Remove $FreeBSD$: one-line .c comment patternWarner Losh2023-08-16139-139/+0
| | | | Remove /^/[*/]\s*\$FreeBSD\$.*\n/
* Remove $FreeBSD$: two-line .h patternWarner Losh2023-08-161-2/+0
| | | | Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
* OpenSSL: update to 3.0.10Pierre Pronchery2023-08-10734-879/+939
| | | | | | | | | | | | | OpenSSL 3.0.10 addresses: - CVE-2023-3817 - CVE-2023-3446 - CVE-2023-2975 (Note that the vendor branch commit incorrectly referenced 3.0.9.) Relnotes: Yes Pull request: https://github.com/freebsd/freebsd-src/pull/808 Sponsored by: The FreeBSD Foundation
* pkgbase: reorganise caroot and openssl packagesDoug Rabson2023-08-052-2/+2
| | | | | | | | | This splits out the certctl utility into a new certctl package and the openssl libs into an openssl-lib package. PR: 272816 Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D41321
* libcrypto: add missing symbols to the FIPS providerPierre Pronchery2023-07-201-0/+73
| | | | | | | | | | The fips.so provider module exposing FIPS-validated algorithms was still missing a number of symbols. PR: 272454 Reviewed by: markj Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D41018
* openssl: include d2i_KeyParams() and d2i_KeyParams_bio()Kristof Provost2023-07-092-2/+4
| | | | | | | | | | | | These functions are new, and some ports (e.g.opensc) expect to have them available. Add the file they're defined in to the build, and add them to Version.map. PR: 270076 Reviewed by: markj, emaste, pierre Fixes: b077aed33b7b ("Merge OpenSSL 3.0.9") Sponsored by: Rubicon Communications, LLC ("Netgate") Differential Revision: https://reviews.freebsd.org/D40914
* libcrypto: group definitions for libcrypto and fipsPierre Pronchery2023-07-054-224/+131
| | | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. This change makes sure the FIPS module matches build instructions used for libcrypto. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: expand the common Makefile for providersPierre Pronchery2023-07-053-8/+5
| | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. This change adds mandatory source files to every provider. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: add missing symbols to the fips providerPierre Pronchery2023-07-051-1/+355
| | | | | | | | | | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. One such provider, "fips", ships with OpenSSL 3 directly, and groups algorithms that can be FIPS 140-2 validated. The import of OpenSSL 3.0.9 was building this provider incorrectly, missing symbols required for proper operation. In addition, without the change in OpenSSL's crypto/bn/bn_const.c, the FIPS module fails loading: `Undefined symbol "ossl_bignum_modp_1536_p"`. This change is consistent with crypto/bn/bn_dh.c though. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: add missing symbols to the legacy providerPierre Pronchery2023-07-052-2/+35
| | | | | | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. One such provider, "legacy", ships with OpenSSL 3 directly, and groups obsoleted algorithms that can still optionally be used anyway. The import of OpenSSL 3.0.9 was building this provider incorrectly, missing symbols required for proper operation. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: Revert recent changes to fix legacy and fips providersMark Johnston2023-07-045-398/+107
| | | | | | | They break the !amd64 builds due to an underspecified include path and will be re-applied once that's fixed. Reported by: Ronald Klop <ronald-lists@klop.ws>
* libcrypto: group definitions for libcrypto and fipsPierre Pronchery2023-07-043-214/+121
| | | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. This change makes sure the FIPS module matches build instructions used for libcrypto. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: expand the common Makefile for providersPierre Pronchery2023-07-043-8/+5
| | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. This change adds mandatory source files to every provider. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: add missing symbols to the fips providerPierre Pronchery2023-07-041-1/+355
| | | | | | | | | | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. One such provider, "fips", ships with OpenSSL 3 directly, and groups algorithms that can be FIPS 140-2 validated. The import of OpenSSL 3.0.9 was building this provider incorrectly, missing symbols required for proper operation. In addition, without the change in OpenSSL's crypto/bn/bn_const.c, the FIPS module fails loading: `Undefined symbol "ossl_bignum_modp_1536_p"`. This change is consistent with crypto/bn/bn_dh.c though. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: add missing symbols to the legacy providerPierre Pronchery2023-07-042-2/+35
| | | | | | | | | | | | | OpenSSL 3 supports a modular architecture, allowing different providers to bring specific implementations of cryptographical algorithms. One such provider, "legacy", ships with OpenSSL 3 directly, and groups obsoleted algorithms that can still optionally be used anyway. The import of OpenSSL 3.0.9 was building this provider incorrectly, missing symbols required for proper operation. Sponsored by: The FreeBSD Foundation Pull Request: https://github.com/freebsd/freebsd-src/pull/787
* libcrypto: build nistp* on all little-endian 64-bit targetsEd Maste2023-06-251-2/+4
| | | | | | | | | | | | | libcrypto intends to provide these routines on little-endian 64-bit targets. This was previously done by including them in the ASM_aarch64 and ASM_amd64 blocks in the Makefile, but this excluded powerpc64le and riscv64. Reported by: ci.freebsd.org Reviewed by: jrtc27 Fixes: b077aed33b7b ("Merge OpenSSL 3.0.9") Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D40749
* Do not expose architecture specific symbolsEnji Cooper2023-06-241-3/+0
| | | | | | | | | | | | | The following methods have existed since 1.0.2, however, they are deprecated and are not available on all architectures. - EC_GFp_nistp224_method - EC_GFp_nistp256_method - EC_GFp_nistp521_method Do not expose them via libcrypto. Discussed with: emaste
* Merge OpenSSL 3.0.9Pierre Pronchery2023-06-23893-9860/+384338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate to OpenSSL 3.0 in advance of FreeBSD 14.0. OpenSSL 1.1.1 (the version we were previously using) will be EOL as of 2023-09-11. Most of the base system has already been updated for a seamless switch to OpenSSL 3.0. For many components we've added `-DOPENSSL_API_COMPAT=0x10100000L` to CFLAGS to specify the API version, which avoids deprecation warnings from OpenSSL 3.0. Changes have also been made to avoid OpenSSL APIs that were already deprecated in OpenSSL 1.1.1. The process of updating to contemporary APIs can continue after this merge. Additional changes are still required for libarchive and Kerberos- related libraries or tools; workarounds will immediately follow this commit. Fixes are in progress in the upstream projects and will be incorporated when those are next updated. There are some performance regressions in benchmarks (certain tests in `openssl speed`) and in some OpenSSL consumers in ports (e.g. haproxy). Investigation will continue for these. Netflix's testing showed no functional regression and a rather small, albeit statistically significant, increase in CPU consumption with OpenSSL 3.0. Thanks to ngie@ and des@ for updating base system components, to antoine@ and bofh@ for ports exp-runs and port fixes/workarounds, and to Netflix and everyone who tested prior to commit or contributed to this update in other ways. PR: 271615 PR: 271656 [exp-run] Relnotes: Yes Sponsored by: The FreeBSD Foundation
* OpenSSL: Merge OpenSSL 1.1.1uJung-uk Kim2023-05-301-1/+0
|
* OpenSSL: Regen manual pages for OpenSSL 1.1.1uJung-uk Kim2023-05-30486-490/+495
|
* ssh: Update to OpenSSH 9.3p1Ed Maste2023-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This release fixes a number of security bugs and has minor new features and bug fixes. Security fixes, from the release notes (https://www.openssh.com/txt/release-9.3): This release contains fixes for a security problem and a memory safety problem. The memory safety problem is not believed to be exploitable, but we report most network-reachable memory faults as security bugs. * ssh-add(1): when adding smartcard keys to ssh-agent(1) with the per-hop destination constraints (ssh-add -h ...) added in OpenSSH 8.9, a logic error prevented the constraints from being communicated to the agent. This resulted in the keys being added without constraints. The common cases of non-smartcard keys and keys without destination constraints are unaffected. This problem was reported by Luci Stanescu. * ssh(1): Portable OpenSSH provides an implementation of the getrrsetbyname(3) function if the standard library does not provide it, for use by the VerifyHostKeyDNS feature. A specifically crafted DNS response could cause this function to perform an out-of-bounds read of adjacent stack data, but this condition does not appear to be exploitable beyond denial-of- service to the ssh(1) client. The getrrsetbyname(3) replacement is only included if the system's standard library lacks this function and portable OpenSSH was not compiled with the ldns library (--with-ldns). getrrsetbyname(3) is only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This problem was found by the Coverity static analyzer. Sponsored by: The FreeBSD Foundation
* OpenSSL: Regen manual pages for OpenSSL 1.1.1tJung-uk Kim2023-02-07485-485/+485
|
* OpenSSL: Merge OpenSSL 1.1.1tJung-uk Kim2023-02-072-2/+3
|
* ssh: update to OpenSSH 9.2p1Ed Maste2023-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes are available at https://www.openssh.com/txt/release-9.2 OpenSSH 9.2 contains fixes for two security problems and a memory safety problem. The memory safety problem is not believed to be exploitable. These fixes have already been committed to OpenSSH 9.1 in FreeBSD. Some other notable items from the release notes: * ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that controls whether the client-side ~C escape sequence that provides a command-line is available. Among other things, the ~C command-line could be used to add additional port-forwards at runtime. * sshd(8): add support for channel inactivity timeouts via a new sshd_config(5) ChannelTimeout directive. This allows channels that have not seen traffic in a configurable interval to be automatically closed. Different timeouts may be applied to session, X11, agent and TCP forwarding channels. * sshd(8): add a sshd_config UnusedConnectionTimeout option to terminate client connections that have no open channels for a length of time. This complements the ChannelTimeout option above. * sshd(8): add a -V (version) option to sshd like the ssh client has. * scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to allow control over some SFTP protocol parameters: the copy buffer length and the number of in-flight requests, both of which are used during upload/download. Previously these could be controlled in sftp(1) only. This makes them available in both SFTP protocol clients using the same option character sequence. * ssh-keyscan(1): allow scanning of complete CIDR address ranges, e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then it will be expanded to all possible addresses in the range including the all-0s and all-1s addresses. bz#976 * ssh(1): support dynamic remote port forwarding in escape command-line's -R processing. bz#3499 MFC after: 1 week Sponsored by: The FreeBSD Foundation
* libcrypto padlock.so: Link with -z noexecstack for ld.bfd.John Baldwin2022-11-221-0/+2
| | | | | The assembly source files do not contain GNU-stack annotations, so ld.bfd defaults to using an executable stack.
* OpenSSL: Regen manual pages for OpenSSL 1.1.1sJung-uk Kim2022-11-01487-640/+693
|
* ssh: update to OpenSSH 9.1p1Ed Maste2022-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes are available at https://www.openssh.com/txt/release-9.1 9.1 contains fixes for three minor memory safety problems; these have lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base system. Some highlights copied from the release notes: Potentially-incompatible changes -------------------------------- * ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config are now first-match-wins to match other directives. Previously if an environment variable was multiply specified the last set value would have been used. bz3438 * ssh-keygen(8): ssh-keygen -A (generate all default host key types) will no longer generate DSA keys, as these are insecure and have not been used by default for some years. New features ------------ * ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum RSA key length. Keys below this length will be ignored for user authentication and for host authentication in sshd(8). * sftp-server(8): add a "users-groups-by-id@openssh.com" extension request that allows the client to obtain user/group names that correspond to a set of uids/gids. * sftp(1): use "users-groups-by-id@openssh.com" sftp-server extension (when available) to fill in user/group names for directory listings. * sftp-server(8): support the "home-directory" extension request defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps a bit with the existing "expand-path@openssh.com", but some other clients support it. * ssh-keygen(1), sshd(8): allow certificate validity intervals, sshsig verification times and authorized_keys expiry-time options to accept dates in the UTC time zone in addition to the default of interpreting them in the system time zone. YYYYMMDD and YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed with a 'Z' character. Also allow certificate validity intervals to be specified in raw seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This is intended for use by regress tests and other tools that call ssh-keygen as part of a CA workflow. bz3468 * sftp(1): allow arguments to the sftp -D option, e.g. sftp -D "/usr/libexec/sftp-server -el debug3" * ssh-keygen(1): allow the existing -U (use agent) flag to work with "-Y sign" operations, where it will be interpreted to require that the private keys is hosted in an agent; bz3429 MFC after: 2 weeks Relnotes: Yes Sponsored by: The FreeBSD Foundation
* openssl: install pc filesBaptiste Daroussin2022-09-066-0/+41
| | | | | | | | | | | | | | | | | | | | | most programs in ports are looking for .pc files in order to get the necessary information on how to compile and link against openssl. The ports now also has a way to hide or force a path for pkgconf. Providing .pc files along with openssl in base will allow (once all the supported version of FreeBSD has it) so improve the framework to deal with openssl in base vs openssl in ports (and libressl) This will also greatly reduce the number of patches necessary to workaround the build systems which only knows how to detect where openssl is installed via pkgconf. PR: 266051 MFC After: 3 weeks Reviewed by: jkim, delphij Exp-run by: antoine Differential Revision: https://reviews.freebsd.org/D36360
* libcrypto: Work around strict aliasing violations in bn_nist.cJessica Clarke2022-07-251-0/+5
| | | | | | | | | | | | | | | | | This file is full of strict aliasing violations. Previously it was only optimised in ways that broke the code by CHERI LLVM, but now it appears that the in-tree LLVM also breaks it for RISC-V, resulting in broken ECDSA signature validation with error messages like the following: root@unmatched:/usr/src # ssh-keygen -l -f /etc/ssh/ssh_host_ecdsa_key /etc/ssh/ssh_host_ecdsa_key is not a key file. root@unmatched:/usr/src # git fetch fatal: unable to access 'https://git.FreeBSD.org/src.git/': error:1012606B:elliptic curve routines:EC_POINT_set_affine_coordinates:point is not on curve Reviewed by: dim, jkim Obtained from: CheriBSD MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D35885
* OpenSSL: Regen manual pages for OpenSSL 1.1.1qJung-uk Kim2022-07-05486-490/+490
|
* OpenSSL: Regen manual pages for OpenSSL 1.1.1pJung-uk Kim2022-06-21487-977/+989
|
* OpenSSL: Merge OpenSSL 1.1.1oJung-uk Kim2022-05-03486-488/+498
|
* OpenSSL: Merge OpenSSL 1.1.1nJung-uk Kim2022-03-15487-517/+611
|
* OpenSSL: Merge OpenSSL 1.1.1mJung-uk Kim2021-12-14487-564/+589
|
* Add assembly optimized code for OpenSSL on powerpc, powerpc64 and powerpc64lePiotr Kubaj2021-11-233-2/+272
| | | | | | | | | | | | Summary: 1. https://github.com/openssl/openssl/commit/34ab13b7d8e3e723adb60be8142e38b7c9cd382a needs to be merged for ELFv2 support on big-endian. 2. crypto/openssl/crypto/ppccap.c needs to be patched. Same reason as in https://github.com/openssl/openssl/pull/17082. Approved by: jkim, jhibbits MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D33076
* ssh: move common Makefile boilerplate to a new ssh.mkEd Maste2021-11-031-3/+1
| | | | | | | | | | This moves SSHDIR and ssh_namespace.h handling to a common location, and will simplify future work such as adding U2F support (D32509). Reviewed by: kevans MFC after: 1 week Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D32808
generated by cgit v1.3 (git 2.53.0) at 2026-03-30 03:43:29 +0000