summaryrefslogtreecommitdiff
path: root/sys/dev/cxgbe
Commit message (Expand)AuthorAgeFilesLines
* cxgbe(4): Add two new transceiver types.Navdeep Parhar2025-04-222-1/+9
* cxgbe(4): Perform Conventional Reset instead of FLR on the device.Navdeep Parhar2025-04-221-18/+117
* cxgbe(4): Block most access to the hardware as soon as the adapter stops.Navdeep Parhar2025-04-225-30/+32
* cxgbe(4): Use correct priority in begin_synchronized_op.Navdeep Parhar2025-04-221-10/+4
* cxgbe(4): Remove some unused PCI routines and associated headers.Navdeep Parhar2025-04-222-30/+0
* cxgbe(4): Remove smt_idx from the L2 table entry structure.Navdeep Parhar2025-04-222-5/+2
* cxgbe(4): Make sure suspend/resume works in recovery mode.Navdeep Parhar2025-04-222-0/+12
* cxgbe tom: Make t4_push_frames static to t4_cpl_io.cJohn Baldwin2025-02-272-2/+1
* cxgbe: Tidy TOE tunables under hw.cxgbeJohn Baldwin2025-02-271-8/+11
* cxgbe tom: Enable TLS offload support by defaultJohn Baldwin2025-02-271-1/+1
* cxgbe/t4_tom: Plug an stid leak.Navdeep Parhar2025-02-141-0/+2
* libkern: add ilog2 macroDoug Moore2025-02-101-8/+0
* cxgbe tom: Restore support for zerocopy TCP receive for aio_read()John Baldwin2024-12-271-10/+10
* cxgbe/t4_tom: Change stid allocation strategy to be more IPv6 friendly.Navdeep Parhar2024-12-063-84/+105
* cxgbe(4): Fix the name of the 2 x 10/25 OCP card.Navdeep Parhar2024-12-061-1/+1
* cxgbe(4): Update the board names of the T6 OCP cards.Navdeep Parhar2024-12-063-9/+9
* cxgbe: Remove most uses of sysctl_wire_old_bufferJohn Baldwin2024-11-301-140/+27
* cxgbe: Add a 'show t4 memdump' DDB commandJohn Baldwin2024-10-211-10/+66
* cxgbe(4): Use correct synchronization when marking the adapter offline.Navdeep Parhar2024-10-211-2/+7
* cxgbe(4): Allow t4_tom to be unloaded safely.Navdeep Parhar2024-10-213-19/+35
* cxgbe/t4_tom: Remove duplicate unlock in t4_tom_deactivate.Navdeep Parhar2024-10-211-1/+0
* cxgbe(4): Clobber all tracer state on stop and redo only traceq on restart.Navdeep Parhar2024-10-211-0/+11
* cxgbe/t4_tom: Do not set unresolved entries to STALE in t4_l2t_update.Navdeep Parhar2024-10-211-1/+2
* cxgbe/t4_tom: completely avoid L2T entries during stop/suspend.Navdeep Parhar2024-10-211-12/+13
* cxgbe(4): Make sure that the tracing filters are usable after restart.Navdeep Parhar2024-10-211-0/+5
* cxgbe/t4_tom: Demote STALE L2 table entries to RESOLVING in uld_stop.Navdeep Parhar2024-10-211-1/+1
* cxgbe/t4_tom: Add synq entry to the list before calling send_synack.Navdeep Parhar2024-10-211-4/+6
* cxgbe(4): Always report link-down on an abrupt stop.Navdeep Parhar2024-10-211-15/+21
* cxgbe/iw_cxgbe: Fail early in some callbacks when the RNIC is stopped.Navdeep Parhar2024-10-215-0/+18
* cxgbe/iw_cxgbe: c4iw_connect should return a negative errno.Navdeep Parhar2024-10-211-2/+1
* cxgbe/iw_cxgbe: Tidy up a couple of CTRs in c4iw_create_listen.Navdeep Parhar2024-10-211-3/+2
* cxgbe/iw_cxgbe: Replace the fatal error flag with a stopped flag.Navdeep Parhar2024-10-214-14/+19
* cxgbe(4): Export the core suspend/resume functionality to other modules.Navdeep Parhar2024-10-212-23/+33
* cxgbe(4): reset routine for general use.Navdeep Parhar2024-10-211-5/+11
* cxgbe(4): Stop work request queues in a reliable manner.Navdeep Parhar2024-10-213-3/+37
* cxgbe/iw_cxgbe: Fix typo in assertion.Navdeep Parhar2024-10-211-1/+1
* cxgbe/t4_tom: bugfixes in stop/restart.Navdeep Parhar2024-10-213-23/+52
* cxgbe/iw_cxgbe: Add a placeholder uld_restart.Navdeep Parhar2024-10-211-0/+8
* cxgbe/t4_tom: Implement uld_stop and uld_restart for ULD_TOM.Navdeep Parhar2024-10-215-72/+409
* cxgbe/t4_tom: Track all synq entries in a per-adapter list.Navdeep Parhar2024-10-213-0/+16
* cxgbe(4): Stop and restart the L2T allocator with the LLD.Navdeep Parhar2024-10-214-5/+47
* cxgbe(4): Stop and restart the atid allocator with the LLD.Navdeep Parhar2024-10-212-1/+33
* cxgbe(4): Basic infrastructure for ULDs to participate in adapter reset.Navdeep Parhar2024-10-213-154/+191
* cxgbe(4): Changes to ULD list management.Navdeep Parhar2024-10-215-130/+97
* cxgbe(4): Make no assumptions about the start and size of the L2T table.Navdeep Parhar2024-10-214-19/+27
* cxgbe/t4_tom: Free up hardware resources when the final CPL is received.Navdeep Parhar2024-10-211-19/+39
* cxgbe/t4_tom: Detach the toep from the tcpcb when entering TIME_WAIT.Navdeep Parhar2024-10-213-1/+4
* cxgbe(4): Tidy up t4_l2t.hNavdeep Parhar2024-10-211-3/+1
* cxgbe(4): Stop checking for failures from malloc/mb_alloc_ext_pgs(M_WAITOK)Zhenlei Huang2024-09-302-8/+0
* cxgbe: Flush transmitted packets more regularly in netmap modeMark Johnston2024-08-081-13/+12
generated by cgit v1.3 (git 2.53.0) at 2026-04-03 05:21:19 +0000