From fa4d25f5b4573a54eebeb7f254b52153b8d3811e Mon Sep 17 00:00:00 2001 From: Ed Maste Date: Tue, 13 Dec 2022 15:07:46 -0500 Subject: retire sconfig(8) ce(4)/cp(4) configuration tool The ce(4) and cp(4) drivers have been retired. Differential Revision: https://reviews.freebsd.org/D33469 --- ObsoleteFiles.inc | 2 + rescue/rescue/Makefile | 2 +- sbin/Makefile.amd64 | 1 - sbin/Makefile.i386 | 1 - sbin/sconfig/Makefile | 10 - sbin/sconfig/Makefile.depend | 15 - sbin/sconfig/sconfig.8 | 614 ---------------- sbin/sconfig/sconfig.c | 1212 ------------------------------- targets/pseudo/userland/Makefile.depend | 1 - 9 files changed, 3 insertions(+), 1855 deletions(-) delete mode 100644 sbin/sconfig/Makefile delete mode 100644 sbin/sconfig/Makefile.depend delete mode 100644 sbin/sconfig/sconfig.8 delete mode 100644 sbin/sconfig/sconfig.c diff --git a/ObsoleteFiles.inc b/ObsoleteFiles.inc index c24435c8e6a3..be9f81dd3cb0 100644 --- a/ObsoleteFiles.inc +++ b/ObsoleteFiles.inc @@ -53,8 +53,10 @@ # done # 20221213: remove sync serial drivers and utilities +OLD_FILES+=sbin/sconfig OLD_FILES+=usr/share/man/man4/ce.4 OLD_FILES+=usr/share/man/man4/cp.4 +OLD_FILES+=usr/share/man/man8/sconfig.8.gz # 20221202: remove trpt(8) OLD_FILES+=usr/sbin/trpt diff --git a/rescue/rescue/Makefile b/rescue/rescue/Makefile index cc4c13c0a624..f6ff701f4c54 100644 --- a/rescue/rescue/Makefile +++ b/rescue/rescue/Makefile @@ -160,7 +160,7 @@ CRUNCH_LIBS+= -lmd CRUNCH_LIBS+= -lmt -lsbuf -lufs -lz .if ${MACHINE_CPUARCH} == "i386" -CRUNCH_PROGS_sbin+= bsdlabel sconfig fdisk +CRUNCH_PROGS_sbin+= bsdlabel fdisk CRUNCH_ALIAS_bsdlabel= disklabel #CRUNCH_PROGS+= mount_smbfs #CRUNCH_LIBS+= -lsmb diff --git a/sbin/Makefile.amd64 b/sbin/Makefile.amd64 index 4135c44082c9..2d231b0cb2b0 100644 --- a/sbin/Makefile.amd64 +++ b/sbin/Makefile.amd64 @@ -2,4 +2,3 @@ SUBDIR += bsdlabel SUBDIR += fdisk -SUBDIR += sconfig diff --git a/sbin/Makefile.i386 b/sbin/Makefile.i386 index 4135c44082c9..2d231b0cb2b0 100644 --- a/sbin/Makefile.i386 +++ b/sbin/Makefile.i386 @@ -2,4 +2,3 @@ SUBDIR += bsdlabel SUBDIR += fdisk -SUBDIR += sconfig diff --git a/sbin/sconfig/Makefile b/sbin/sconfig/Makefile deleted file mode 100644 index 8617eaf4b1cc..000000000000 --- a/sbin/sconfig/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# Cronyx Id: sbin.sconfig.Makefile,v 1.1.4.1 2003/02/17 12:51:24 rik Exp $ -# $FreeBSD$ - -PACKAGE=utilities -PROG= sconfig -MAN= sconfig.8 -WARNS?= 2 -CFLAGS+= -I${SRCTOP}/sys/dev/cp - -.include diff --git a/sbin/sconfig/Makefile.depend b/sbin/sconfig/Makefile.depend deleted file mode 100644 index c729e17c52db..000000000000 --- a/sbin/sconfig/Makefile.depend +++ /dev/null @@ -1,15 +0,0 @@ -# $FreeBSD$ -# Autogenerated - do NOT edit! - -DIRDEPS = \ - include \ - include/xlocale \ - lib/${CSU_DIR} \ - lib/libc \ - - -.include - -.if ${DEP_RELDIR} == ${_DEP_RELDIR} -# local dependencies - needed for -jN in clean tree -.endif diff --git a/sbin/sconfig/sconfig.8 b/sbin/sconfig/sconfig.8 deleted file mode 100644 index 67d613202a92..000000000000 --- a/sbin/sconfig/sconfig.8 +++ /dev/null @@ -1,614 +0,0 @@ -.\" Copyright (c) 2002-2004 Roman Kurakin -.\" Copyright (c) 2002-2004 Cronyx Engineering -.\" All rights reserved. -.\" -.\" This software is distributed with NO WARRANTIES, not even the implied -.\" warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" Authors grant any other persons or organisations a permission to use, -.\" modify and redistribute this software in source and binary forms, -.\" as long as this message is kept with the software, all derivative -.\" works or modified versions. -.\" -.\" $FreeBSD$ -.Dd December 13, 2022 -.Dt SCONFIG 8 i386 -.Os -.Sh NAME -.Nm sconfig -.Nd "channel configuration utility for Cronyx adapters" -.Sh SYNOPSIS -.Nm -.Op Fl aimsxeftuc -.Op Ar device -.Op Ar data_rate_options -.Op Ar protocol_options ... -.Op Ar interface_options ... -.Sh DEPRECATION NOTICE -The -.Nm -utility is not present in -.Fx 14.0 -and later. -.Sh DESCRIPTION -The -.Nm -utility is used for configuring the channel options of the Cronyx -adapters. -In asynchronous mode, all parameters should be set using the standard -.Xr stty 1 -utility. -With -.Nm , -it is only possible to set some of them (see below). -.Pp -Some of the options can be set only on free channels, -that is when the corresponding network interface is in the -.Cm down -state in the synchronous mode, -and the terminal device -.Pa /dev/tty* -is closed in asynchronous mode. -.Pp -Other channel options can be changed -.Dq "on the fly" . -Generally, the channel options are set up during the operating system startup, -for example, from the -.Pa /etc/rc -script. -.Pp -Note that not all options make sense in every particular case, -and an attempt to set some of them may hung up the channel -or the whole adapter. -.\"-------------------------------------------------------------- -.Ss "Information Options" -Only one of these options can be specified. -If information option is specified, -.Nm -will show the corresponding information and will ignore all other options, -except -.Ar device . -See also the description of the -.Ar device -argument. -.Bl -tag -width indent -.It -This will show settings of the channel. -.It Fl a -Print all settings of the channel. -.It Fl i -Print interface settings, equal to the output of the -.Xr ifconfig 8 -utility. -.It Fl m -Print modem signal status. -The description of all signals can be found in any modem documentation. -Only LE signal should be described. -If this signal is ON then the channel is busy. -If it is OFF then the channel is free. -.It Fl s -Print brief channel statistics. -This is the generic statistics, -see also the -.Fl x , e , f , t , -and -.Fl u -options. -For a description of the output, see below. -.Pp -This statistics is very useful if something goes wrong. -For example, if all interrupt counters are zero then the device -was configured to use an interrupt that was not registered in the -BIOS for use with the ISA bus. -.It Fl x -Print full channel statistics. -This options prints additional counters, -but with less precision than with the -.Fl s -option. -.It Fl e -Print brief E1/G703 statistics. -If this option is selected, the -statistics accumulated over the last 15 minutes is printed. -For a description of the output, see below. -.It Fl f -Print full E1/G703 statistics. -This option shows all E1/G703 statistics that the -.Fl e -option shows, -plus total statistics for the whole period of time and statistics for -last 24 hours (if available). -For a description of the output, see below. -.It Fl t -Print brief E3/T3/STS-1 statistics. -If this option is selected, the -statistics accumulated over the last 15 minutes is printed. -For a description of the output, see below. -.It Fl u -Print full E3/T3/STS-1 statistics. -This option shows all E3/T3/STS-1 statistics that the -.Fl t -option shows, -plus total statistics for the whole period of time and statistics for -last 24 hours (if available). -For a description of the output, see below. -.It Fl c -Cleans all kind of statistics. -.El -.\"-------------------------------------------------------------- -.Ss "Device Selection" -The device is selected using the name of the network interface, -as shown by -.Xr ifconfig 8 . -The channel number depends on the order the drivers were loaded into the system. -Sometimes people confuse channel number and adapter number because of the -same spelling. -The adapter number appears in the kernel context, while the channel number -is in the configuration context. -.Bl -tag -width indent -.It -If the device name is omitted, -.Nm -will print information about all channels of all Cronyx adapters -available in the system. -If some settings need to be made, the device name must be specified. -.It Li cx Ns Ar ## -This is the channel name for the Sigma family of Cronyx adapters. -(ISA bus.) -.It Li ct Ns Ar ## -This is the channel name for the Tau family of Cronyx adapters. -(ISA bus.) -.It Li cp Ns Ar ## -This is the channel name for the Tau-PCI family of Cronyx adapters. -(PCI bus.) -.It Li ce Ns Ar ## -This is the channel name for the Tau32-PCI family of Cronyx adapters. -(PCI bus.) -.El -.\"-------------------------------------------------------------- -.Ss "Data Rate Options" -.Bl -tag -width indent -.It Ar value -A non-zero value will set the data rate to a given value -in asynchronous mode, -and will set the data rate and internal clock source of synchronization -in synchronous mode. -A zero value is equivalent to specifying the -.Cm extclock -option. -The transmitted data (TxD) are synchronized using the internal on-board timing -generator, the internally generated timing signal is driven on the TXCOUT pin, -and the signal on the TXCIN pin is ignored. -This mode is used for direct -terminal-to-terminal communication, e.g., when connecting two computers together -in synchronous mode with a relatively short cable. -This method should also be -used for testing channels with an external loopback connector. -.It Cm extclock -Set the external timing clock source for synchronous channels. -External clock mode is the most commonly used method for connecting -external modem hardware. -In this mode, -the external timing signal is received on the TXCIN pin of the connector, -and it is used as a synchronization clock for transmitting data (TxD). -.Pp -Note: in -.Cm extclock -mode, the device cannot determine the value of the external timing clock -since it does not have the built-in clock gauge. -.El -.\"-------------------------------------------------------------- -.Ss "Protocol Options" -Note: these option can only be used on a free channel, and they require -specifying the device name. -.Bl -tag -width indent -.It Cm async -(Only for Sigma family.) -Select the asynchronous protocol (or mode). -In this mode, Cronyx adapters behave as normal serial devices, -and standard serial communications utilities can be used to -work with them. -All asynchronous settings should be set using the standard -serial communications configuration utilities, e.g., -.Xr stty 1 . -With -.Nm , -it is only possible to set some of them. -.It Cm cisco -Select the Cisco HDLC synchronous protocol. -.It Cm fr -Select the Frame Relay synchronous protocol -.Tn ( ANSI -T1.617 Annex D). -.It Cm ppp -Select the synchronous PPP protocol. -.It Sm Cm keepalive No = Bro Cm on , off Brc Sm -Turn on/off transmission of keepalive messages. -This option is used only for synchronous PPP. -If this option is -.Cm on , -PPP will periodically send ECHO-REQUEST messages. -If it will not receive any ECHO-REPLY messages for -some (definite) period of time it will break the connection. -It is used for tracking the line state. -.It Cm idle -This mode is reported when using Netgraph. -An actual protocol depends on the type of a connected Netgraph node, -and it cannot be changed with -.Nm . -.El -.\"-------------------------------------------------------------- -.Ss "Interface Options" -Not all of these options can be set on a busy channel, and not all of them -are applicable to all kinds of adapters/channels. -For all dual-state options, -.Cm off -is the default value. -None of these options can be used in the asynchronous mode, -except for the -.Cm debug -option. -.Bl -tag -width indent -.It Sm Cm port No = Bro Cm rs232 , v35 , rs449 Brc Sm -Set the port type for old Sigma models. -.It Sm Cm cfg No = Bro Cm A , B , C Brc Sm -Set the configuration for the adapter. -This option can be used only with Tau/E1 -and Tau/G703 adapters, and only if all channels are free. -.Bl -tag -width ".Cm cfg Ns = Ns Cm A" -.It Cm cfg Ns = Ns Cm A -Two independent E1/G703 channels. -This is the default setting. -.It Cm cfg Ns = Ns Cm B -(Only for ISA models.) -For Tau/G703 this means one G703 channel and one digital channel. -For Tau/E1, the first physical channel is divided into two subchannels. -One of them goes to the first logical channel, another one goes to the -second physical channel. -Second (logical) channel is the digital channel. -.It Cm cfg Ns = Ns Cm C -(Only for E1 models.) -In this mode, first -physical channel consists of three data flows. -Two of them go to the two (logical) channels. -The last one goes to the second physical channel. -On newer models (Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1), -this programs the hardware to use a single source of synchronization -and pass all unused (in both channels) timeslots from -one channel to another. -.El -.Pp -For a detailed description of available configuration modes, -see the adapter documentation. -This option cannot be set on a busy channel. -.It Sm Cm loop No = Bro Cm on , off Brc Sm -Turn on/off internal loopback. -This mode is useful for debugging. -When this mode is -.Cm on , -some data should be sent. -If no interrupts are generated, chances are that -the corresponding IRQ configuration entry in the BIOS -was not switched from -.Dq Li "PCI/ISA PNP" -to -.Dq Li "Legacy ISA" . -.It Sm Cm rloop No = Bro Cm on , off Brc Sm -(Only for Tau32-PCI and Tau-PCI/E3.) -Turn on/off remote loopback feature. -This mode is also useful for debugging. -.It Sm Cm dpll No = Bro Cm on , off Brc Sm -Turn on/off digital phase locked loop mode (DPLL). -When enabled, the receiver -timing clock signal is derived from the received data. -Must be used with the NRZI -encoding to avoid the synchronization loss. -.It Sm Cm nrzi No = Bro Cm on , off Brc Sm -Turn on/off NRZI encoding. -If -.Cm off , -NRZ encoding is used. -.Bl -tag -width "NRZI" -.It NRZ -The zero bit is transmitted by the zero signal level, -the one bit is transmitted by the positive signal level. -.It NRZI -The zero bit is transmitted by the change of the signal -level, the one bit is by the constant signal level. -Commonly used with the -.Cm dpll Ns = Ns Cm on -option. -.El -.It Sm Cm invclk No = Bro Cm on , off Brc Sm -(Tau and Tau-PCI only.) -Invert both the transmit and receive clock signals. -.It Sm Cm invrclk No = Bro Cm on , off Brc Sm -(Tau-PCI only.) -Invert the receive clock signals. -.It Sm Cm invtclk No = Bro Cm on , off Brc Sm -(Tau-PCI only.) -Invert the transmit clock signals. -.It Sm Cm higain No = Bro Cm on , off Brc Sm -(E1 only.) -In off state the sensitivity is -12 dB. -Turn on/off increasing the E1 receiver's non-linear sensitivity to -30dB. -This allows increasing of the line distance. -.It Sm Cm cablen No = Bro Cm on , off Brc Sm -(Tau-PCI/T3 and Tau-PCI/STS-1 only.) -Turn on/off adjusting of the transmit signal for a long cable T3/STS-1. -.It Sm Cm monitor No = Bro Cm on , off Brc Sm -(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.) -Turn on/off increasing of the E1 receiver's linear sensitivity to -30dB. -This can be used for the interception purposes. -.It Sm Cm phony No = Bro Cm on , off Brc Sm -(Tau32-PCI and Tau-PCI E1 family only.) -Turn on/off the so-called -.Dq phony -mode. -This mode allows -receiving raw CEPT frames from the E1 line. -Raw frames can be accessed, for example, with the raw protocol. -Packets would come at a rate of 500 frames per second -with length -.No 16* Ns Ar N -(for Tau-PCI/E1 model), where -.Ar N -is the number of timeslots. -For -Tau-PCI/2E1 and Tau-PCI/4E1, -.Ar N -should be equal to 32 regardless of the number of -used timeslots. -.It Sm Cm unfram No = Bro Cm on , off Brc Sm -(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.) -Turn on/off unframed mode. -.Bl -tag -width ".Cm unfram Ns = Ns Cm off" -.It Cm unfram Ns = Ns Cm on -Switch channel to the unframed G.703 mode. -.It Cm unfram Ns = Ns Cm off -Switch channel to the framed E1 (G.704) mode. -.El -.It Sm Cm scrambler No = Bro Cm on , off Brc Sm -(Tau32-PCI, Tau-PCI/G.703, Tau-PCI/2E1, and -Tau-PCI/4E1 in unframed mode only.) -Turn on/off scrambling of the G.703 data. -.It Sm Cm use16 No = Bro Cm on , off Brc Sm -(Tau32-PCI and Tau-PCI E1 family only.) -Turn on/off the usage of the 16th timeslot for data transmission. -Normally, the 16th timeslot is used for signalling information -(multiframing CAS). -.It Sm Cm crc4 No = Bro Cm on , off Brc Sm -(E1 only.) -Turn on/off CRC4 superframe mode. -.It Sm Cm syn No = Bro Cm int , rcv , rcv0 , rcv1 , rcv2 , rcv3 Brc Sm -.Bl -tag -width ".Cm rcv3" -.It Cm int -Use an internal clock generator for G703 transmitter -(clock master). -.It Cm rcv -Use the G703 receiver data clock as the transmit clock -(clock slave). -.It Cm rcv0 , rcv1 , rcv2 , rcv3 -Use the G703 receiver clock of the other channel -(E1 models only). -.El -.It Cm dir Ns = Ns Ar number -(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.) -Bind a logical channel to a physical channel. -Using this parameter it is possible, for example, to split -physical E1 channel into several logical channels. -.It Cm ts Ns = Ns Ar interval -(E1 only.) -Set up the list of timeslots for use by the channel. -The timeslots are numbered from 1 to 31, -and are separated by a comma or a minus sign, -giving an interval. -Example: -.Dq Li ts=1-3,5,17 . -.It Cm pass Ns = Ns Ar interval -(Tau/E1 only.) -Set up the list of timeslots, translated to the E1 subchannel in -.Cm cfg Ns = Ns Cm B -and -.Cm cfg Ns = Ns Cm C -configurations. -.It Sm Cm debug No = Bro Cm 0 , 1 , 2 Brc Sm -Turn on/off debug messages. -.Bl -tag -width 2n -.It Cm 0 -Turn debug messages off. -.It Cm 1 -Turn debug messages on, equivalent to the -.Cm debug -option of the -.Xr ifconfig 8 -utility. -.It Cm 2 -High intensive debug messages, for developers only. -.El -.El -.\"-------------------------------------------------------------- -.Sh EXAMPLES -Set up channel 1 for use with the HDSL modem or any other -synchronous leased-line modem, and PPP/HDLC protocol (for Sigma): -.Bd -literal -offset indent -sconfig cx1 ppp extclock -ifconfig cx1 158.250.244.2 158.250.244.1 up -.Ed -.Pp -Set up channel 0 of Tau/E1 for use with the Cisco protocol -over the E1 link, with a single virtual connection. -The DLCI number is detected automatically. -Use timeslots 1-10: -.Bd -literal -offset indent -sconfig ct0 cisco ts=1-10 -ifconfig ct0 158.250.244.2 158.250.244.1 up -.Ed -.Pp -Set up channel 0 for the synchronous null-modem link to the nearby computer, -internal clock source, 256000 bits/sec, protocol Cisco/HDLC (for Tau): -.Bd -literal -offset indent -sconfig ct0 cisco 256000 -ifconfig ct0 200.1.1.1 200.1.1.2 up -.Ed -.Pp -Set up channel 1 for the leased line link using the data-only -null-modem cable (or modems like Zelax+ M115). -Synchronous DPLL mode, 128000 -bits/sec, protocol PPP/HDLC, NRZI encoding (for Sigma): -.Bd -literal -offset indent -sconfig cx1 ppp 128000 nrzi=on dpll=on -ifconfig cx1 158.250.244.2 158.250.244.1 up -.Ed -.\"-------------------------------------------------------------- -.Sh DIAGNOSTICS -This section contains a description of abbreviations used by -.Nm -while displaying various statistics. -For a description of options related to -statistics, please see above. -.\"-------------------------------------------------------------- -.Ss Statistics -When running, the driver gathers statistics about the channels, which -can be accessed using the -.Nm -utility, -or through the -.Xr ioctl 2 -call -.Dv SERIAL_GETSTAT . -.Pp -.Bl -tag -width indent -compact -.It Va Rintr -Total number of receive interrupts. -.It Va Tintr -Total number of transmit interrupts. -.It Va Mintr -Total number of modem interrupts. -.It Va Ibytes -Total bytes received. -.It Va Ipkts -Total packets received (for HDLC mode). -.It Va Ierrs -Number of receive errors. -.It Va Obytes -Total bytes transmitted. -.It Va Opkts -Total packets transmitted (for HDLC mode). -.It Va Oerrs -Number of transmit errors. -.El -.\"-------------------------------------------------------------- -.Ss E1/G.703 Statistics -For E1 and G.703 channels, the SNMP-compatible statistics data are gathered -(see RFC 1406). -It can be accessed using the -.Nm -utility, -or through the -.Xr ioctl 2 -call -.Dv SERIAL_GETESTAT . -.Bl -tag -width ".Va RCRC Pq Va rcrce" -.It Va Unav Pq Va uas -Unavailable seconds: receiving all ones, loss of carrier, or loss of -signal. -.It Va Degr Pq Va dm -Degraded minutes: having error rate more than 10E-6, not counting unavailable -and severely errored seconds. -.It Va Bpv Pq Va bpv -HDB3 bipolar violation errors. -.It Va Fsyn Pq Va fse -Frame synchronization errors (E1 only). -.It Va CRC Pq Va crce -CRC4 errors (E1). -.It Va RCRC Pq Va rcrce -Remote CRC4 errors: E-bit counter (E1). -.It Va Err Pq Va es -Errored seconds: any framing errors, or out of frame sync, or any slip events. -.It Va Lerr Pq Va les -Line errored seconds: any BPV. -.It Va Sev Pq Va ses -Severely errored seconds: 832 or more framing errors, or 2048 or more bipolar -violations. -.It Va Bur Pq Va bes -Bursty errored seconds: more than 1 framing error, but not severely errored. -.It Va Oof Pq Va oofs -Severely errored framing seconds: out of frame sync. -.It Va Slp Pq Va css -Controlled slip seconds: any slip buffer overflow or underflow. -.El -.\"-------------------------------------------------------------- -.Ss E1/G.703 Status -The -.Nm -utility also prints the E1/G.703 channel status. -The status can have the -following values (non-exclusive): -.Pp -.Bl -tag -width ".Li FARLOMF" -compact -.It Li Ok -The channel is in a valid state, synchronized. -.It Li LOS -Loss of sync. -.It Li AIS -Receiving unframed all ones (E1 only). -.It Li LOF -Loss of framing (E1 only). -.It Li LOMF -Loss of multiframing (E1 only). -.It Li FARLOF -Receiving remote alarm (E1 only). -.It Li AIS16 -Receiving all ones in the timeslot 16 (E1 only). -.It Li FARLOMF -Receiving distant multiframe alarm (E1 only). -.It Li TSTREQ -Receiving test request code (G.703 only). -.It Li TSTERR -Test error (G.703 only). -.El -.\"-------------------------------------------------------------- -.Sh SEE ALSO -.Xr stty 1 , -.Xr ioctl 2 , -.Xr ifconfig 8 , -.Xr route 8 , -.\"-------------------------------------------------------------- -.Sh HISTORY -The -.Nm -utility appeared in -.Fx 5.2 . -The -.Nm -utility is a replacement for the -.Nm cxconfig -and -.Nm ctconfig -utilities that were used in the past with -.Fx -drivers. -Those two utilities and -.Nm -are not compatible, -and therefore all scripts using them have to be rewritten. -Moreover, -.Tn Linux -and -.Fx -versions of the -.Nm -utility are not fully compatible. -.\"-------------------------------------------------------------- -.Sh AUTHORS -.An Cronyx Engineering Aq Mt info@cronyx.ru -.Pp -.Pa http://www.cronyx.ru -.\"-------------------------------------------------------------- -.Sh BUGS -All software produced by Cronyx Engineering is thoroughly tested. -But as created by a man, it can contain some bugs. -If you have caught one, try to localize it and send an email with the -description of the bug, and all operations that you have done. -We will try to reproduce the error and fix it. diff --git a/sbin/sconfig/sconfig.c b/sbin/sconfig/sconfig.c deleted file mode 100644 index 48363036e412..000000000000 --- a/sbin/sconfig/sconfig.c +++ /dev/null @@ -1,1212 +0,0 @@ -/* - * Channel configuration utility for Cronyx serial adapters. - * - * Copyright (C) 1997-2002 Cronyx Engineering. - * Author: Serge Vakulenko, - * - * Copyright (C) 1999-2005 Cronyx Engineering. - * Author: Roman Kurakin, - * - * This software is distributed with NO WARRANTIES, not even the implied - * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Authors grant any other persons or organisations permission to use - * or modify this software as long as this message is kept with the software, - * all derivative works or modified versions. - * - * Cronyx Id: sconfig.c,v 1.4.2.2 2005/11/09 13:01:35 rik Exp $ - */ - -#include -__FBSDID("$FreeBSD$"); - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "cserial.h" - -#define MAXCHAN 128 - -int vflag, eflag, sflag, mflag, cflag, fflag, iflag, aflag, xflag; -int tflag, uflag; -char mask[64]; -int adapter_type; /* 0-sigma, 1-tau, 2-taupci, 3-tau32 */ -char chan_name[16]; - -static void -usage (void) -{ - printf( -"Serial Adapter Configuration Utility\n" -"Copyright (C) 1998-2005 Cronyx Engineering.\n" -"See also man sconfig (8)\n" -"Usage:\n" -"\tsconfig [-aimsxeftuc] [device [parameters ...]]\n" -"\n" -"Options:\n" -"\t\t\t -- print channel options\n" -"\t-a\t\t\t -- print all settings of the channel\n" -"\t-i\t\t\t -- print network interface status\n" -"\t-m\t\t\t -- print modem signal status\n" -"\t-s\t\t\t -- print channel statistics\n" -"\t-x\t\t\t -- print extended channel statistics\n" -"\t-e\t\t\t -- print short E1/G703 statistics\n" -"\t-f\t\t\t -- print full E1/G703 statistics\n" -"\t-t\t\t\t -- print short E3/T3/STS-1 statistics\n" -"\t-u\t\t\t -- print full E3/T3/STS-1 statistics\n" -"\t-c\t\t\t -- clear statistics\n" -"\nParameters:\n" -"\t\t\t -- baud rate, internal clock\n" -"\textclock\t\t -- external clock (default)\n" -"\nProtocol options:\n" -"\tasync\t\t\t -- asynchronous protocol\n" -#ifdef __linux__ -"\tsync\t\t\t -- synchronous protocol\n" -#endif -"\tcisco\t\t\t -- Cisco/HDLC protocol\n" -"\tfr\t\t\t -- Frame Relay protocol\n" -#ifdef __linux__ -"\t dlci\t -- Add new DLCI\n" -#endif -"\tppp\t\t\t -- PPP protocol\n" -#ifdef __linux__ -"\trbrg\t\t\t -- Remote bridge\n" -"\traw\t\t\t -- raw HDLC protocol\n" -"\tpacket\t\t\t -- packetized HDLC protocol\n" -"\tidle\t\t\t -- no protocol\n" -#else -"\t keepalive={on,of}\t -- Enable/disable keepalive\n" -#endif -"\nInterface options:\n" -"\tport={rs232,v35,rs449}\t -- port type (for old models of Sigma)\n" -"\tcfg={A,B,C}\t\t -- adapter configuration\n" -"\tloop={on,off}\t\t -- internal loopback\n" -"\trloop={on,off}\t\t -- remote loopback\n" -"\tdpll={on,off}\t\t -- DPLL mode\n" -"\tnrzi={on,off}\t\t -- NRZI encoding\n" -"\tinvclk={on,off}\t\t -- invert receive and transmit clock\n" -"\tinvrclk={on,off}\t -- invert receive clock\n" -"\tinvtclk={on,off}\t -- invert transmit clock\n" -"\thigain={on,off}\t\t -- E1 high non linear input sensitivity \n\t\t\t\t (long line)\n" -"\tmonitor={on,off}\t -- E1 high linear input sensitivity \n\t\t\t\t (interception mode)\n" -"\tphony={on,off}\t\t -- E1 telepnony mode\n" -"\tunfram={on,off}\t\t -- E1 unframed mode\n" -"\tscrambler={on,off}\t -- G.703 scrambling mode\n" -"\tuse16={on,off}\t\t -- E1 timeslot 16 usage\n" -"\tcrc4={on,off}\t\t -- E1 CRC4 mode\n" -#ifdef __linux__ -"\tami={on,off}\t\t -- E1 AMI or HDB3 line code\n" -"\tmtu={size}\t\t -- set MTU in bytes\n" -#endif -"\tsyn={int,rcv,rcvX}\t -- G.703 transmit clock\n" -"\tts=...\t\t\t -- E1 timeslots\n" -"\tpass=...\t\t -- E1 subchannel timeslots\n" -"\tdir=\t\t -- connect channel to link\n" -/*"\trqken={size}\t\t -- set receive queue length in packets\n"*/ -/*"\tcablen={on,off}\t\t -- T3/STS-1 high transmitter output for long cable\n"*/ -"\tdebug={0,1,2}\t\t -- enable/disable debug messages\n" - ); - exit (0); -} - -static unsigned long -scan_timeslots (char *s) -{ - char *e; - long v; - int i; - unsigned long ts, lastv; - - ts = lastv = 0; - for (;;) { - v = strtol (s, &e, 10); - if (e == s) - break; - if (*e == '-') { - lastv = v; - s = e+1; - continue; - } - if (*e == ',') - ++e; - - if (lastv) - for (i=lastv; i= 0) { - /* Ok. */ - close (s); - return 1; - } - close (s); - - /* open pseudo-tty and try to set PPP discipline */ - sprintf (pttyname, "/dev/ptyXX"); - p1 = &pttyname[8]; - p2 = &pttyname[9]; - for (i=0; i<16; i++) { - struct stat stb; - - *p1 = "pqrstuvwxyzabcde"[i]; - *p2 = '0'; - if (stat (pttyname, &stb) < 0) - continue; - for (j=0; j<16; j++) { - *p2 = "0123456789abcdef"[j]; - p = open (pttyname, 2); - if (p > 0) { - if (ioctl (p, TIOCSETD, &ppp_disc) < 0) { - fprintf (stderr, "No PPP discipline in kernel.\n"); - close (p); - return 0; - } - close (p); - return 1; - } - } - } - fprintf (stderr, "Cannot get pseudo-tty.\n"); - return 0; -#else - return 1; -#endif -} - -static char * -format_timeslots (unsigned long s) -{ - static char buf [100]; - char *p = buf; - int i; - - for (i=1; i<32; ++i) - if ((s >> i) & 1) { - int prev = (i > 1) & (s >> (i-1)); - int next = (i < 31) & (s >> (i+1)); - - if (prev) { - if (next) - continue; - *p++ = '-'; - } else if (p > buf) - *p++ = ','; - - if (i >= 10) - *p++ = '0' + i / 10; - *p++ = '0' + i % 10; - } - *p = 0; - return buf; -} - -static void -print_modems (int fd, int need_header) -{ - int status; - - if (ioctl (fd, TIOCMGET, &status) < 0) { - perror ("getting modem status"); - return; - } - if (need_header) - printf ("Channel\tLE\tDTR\tDSR\tRTS\tCTS\tCD\n"); - printf ("%s\t%s\t%s\t%s\t%s\t%s\t%s\n", chan_name, - status & TIOCM_LE ? "On" : "-", - status & TIOCM_DTR ? "On" : "-", - status & TIOCM_DSR ? "On" : "-", - status & TIOCM_RTS ? "On" : "-", - status & TIOCM_CTS ? "On" : "-", - status & TIOCM_CD ? "On" : "-"); -} - -static void -#ifdef __linux__ -print_ifconfig (int fd) -#else -print_ifconfig (int fd __unused) -#endif -{ - char buf [64]; -#ifdef __linux__ - char protocol [8]; - - if (ioctl (fd, SERIAL_GETPROTO, &protocol) >= 0 && - strcmp (protocol, "fr") == 0) - sprintf (buf, "ifconfig %sd16 2>/dev/null", chan_name); - else -#endif - sprintf (buf, "ifconfig %s 2>/dev/null", chan_name); - system (buf); -} - -static void -set_debug_ifconfig (int on) -{ - char buf [64]; - sprintf (buf, "ifconfig %s %sdebug 2>/dev/null", chan_name, - on ? "" : "-"); - system (buf); -} - -static char * -format_long (unsigned long val) -{ - static char s[32]; - int l; - l = sprintf (s, "%lu", val); - if (l>7 && !sflag) { - s[3] = s[2]; - s[2] = s[1]; - s[1] = '.'; - s[4] = 'e'; - sprintf (s + 5, "%02d", l-1); - } - return s; -} - -static void -print_stats (int fd, int need_header) -{ - struct serial_statistics st; - unsigned long sarr [9]; - int i; - - if (ioctl (fd, SERIAL_GETSTAT, &st) < 0) { - perror ("getting statistics"); - return; - } - if (need_header) { - if (sflag) { - printf (" ------------Receive----------- " - "------------Transmit----------\n"); - printf ("Channel Interrupts Packets Errors " - "Interrupts Packets Errors\n"); - } - else { - printf (" --------Receive--------------- " - "--------Transmit-------------- Modem\n"); - printf ("Channel Intrs Bytes Packets Errors " - "Intrs Bytes Packets Errors Intrs\n"); - } - } - - sarr [0] = st.rintr; - sarr [1] = st.ibytes; - sarr [2] = st.ipkts; - sarr [3] = st.ierrs; - sarr [4] = st.tintr; - sarr [5] = st.obytes; - sarr [6] = st.opkts; - sarr [7] = st.oerrs; - sarr [8] = st.mintr; - printf ("%s", chan_name); - if (sflag) { - printf ("\t%-12lu%-12lu%-12lu%-12lu%-12lu%-12lu", sarr[0], - sarr[2], sarr[3], sarr[4], sarr[6], sarr[7]); - } else { - for (i = 0; i < 9; i++) - printf ("\t%s", format_long (sarr [i])); - printf ("\n"); - } -} - -static void -clear_stats (int fd) -{ - if (ioctl (fd, SERIAL_CLRSTAT, 0) < 0) { - perror ("clearing statistics"); - exit (-1); - } -} - -static char * -format_e1_status (unsigned long status) -{ - static char buf [80]; - - if (status == 0) - return "n/a"; - if (status & E1_NOALARM) - return "Ok"; - buf[0] = 0; - if (status & E1_LOS) strcat (buf, ",LOS"); - if (status & E1_AIS) strcat (buf, ",AIS"); - if (status & E1_LOF) strcat (buf, ",LOF"); - if (status & E1_LOMF) strcat (buf, ",LOMF"); - if (status & E1_CRC4E) strcat (buf, ",CRC4E"); - if (status & E1_FARLOF) strcat (buf, ",FARLOF"); - if (status & E1_AIS16) strcat (buf, ",AIS16"); - if (status & E1_FARLOMF) strcat (buf, ",FARLOMF"); -/* if (status & E1_TSTREQ) strcat (buf, ",TSTREQ");*/ -/* if (status & E1_TSTERR) strcat (buf, ",TSTERR");*/ - if (buf[0] == ',') - return buf+1; - return "Unknown"; -} - -static void -print_frac (int leftalign, unsigned long numerator, unsigned long divider) -{ - int n; - - if (numerator < 1 || divider < 1) { - printf (leftalign ? "/- " : " -"); - return; - } - n = (int) (0.5 + 1000.0 * numerator / divider); - if (n < 1000) { - printf (leftalign ? "/.%-3d" : " .%03d", n); - return; - } - putchar (leftalign ? '/' : ' '); - - if (n >= 1000000) n = (n+500) / 1000 * 1000; - else if (n >= 100000) n = (n+50) / 100 * 100; - else if (n >= 10000) n = (n+5) / 10 * 10; - - switch (n) { - case 1000: printf (".999"); return; - case 10000: n = 9990; break; - case 100000: n = 99900; break; - case 1000000: n = 999000; break; - } - if (n < 10000) printf ("%d.%d", n/1000, n/10%100); - else if (n < 100000) printf ("%d.%d", n/1000, n/100%10); - else if (n < 1000000) printf ("%d.", n/1000); - else printf ("%d", n/1000); -} - -static void -print_e1_stats (int fd, int need_header) -{ - struct e1_statistics st; - int i, maxi; - - if (need_header) - printf ("Chan\t Unav/Degr Bpv/Fsyn CRC/RCRC Err/Lerr Sev/Bur Oof/Slp Status\n"); - - if (ioctl (fd, SERIAL_GETESTAT, &st) < 0) - return; - printf ("%s\t", chan_name); - - /* Unavailable seconds, degraded minutes */ - print_frac (0, st.currnt.uas, st.cursec); - print_frac (1, 60 * st.currnt.dm, st.cursec); - - /* Bipolar violations, frame sync errors */ - print_frac (0, st.currnt.bpv, st.cursec); - print_frac (1, st.currnt.fse, st.cursec); - - /* CRC errors, remote CRC errors (E-bit) */ - print_frac (0, st.currnt.crce, st.cursec); - print_frac (1, st.currnt.rcrce, st.cursec); - - /* Errored seconds, line errored seconds */ - print_frac (0, st.currnt.es, st.cursec); - print_frac (1, st.currnt.les, st.cursec); - - /* Severely errored seconds, bursty errored seconds */ - print_frac (0, st.currnt.ses, st.cursec); - print_frac (1, st.currnt.bes, st.cursec); - - /* Out of frame seconds, controlled slip seconds */ - print_frac (0, st.currnt.oofs, st.cursec); - print_frac (1, st.currnt.css, st.cursec); - - printf (" %s\n", format_e1_status (st.status)); - - if (fflag) { - /* Print total statistics. */ - printf ("\t"); - print_frac (0, st.total.uas, st.totsec); - print_frac (1, 60 * st.total.dm, st.totsec); - - print_frac (0, st.total.bpv, st.totsec); - print_frac (1, st.total.fse, st.totsec); - - print_frac (0, st.total.crce, st.totsec); - print_frac (1, st.total.rcrce, st.totsec); - - print_frac (0, st.total.es, st.totsec); - print_frac (1, st.total.les, st.totsec); - - print_frac (0, st.total.ses, st.totsec); - print_frac (1, st.total.bes, st.totsec); - - print_frac (0, st.total.oofs, st.totsec); - print_frac (1, st.total.css, st.totsec); - - printf (" -- Total\n"); - - /* Print 24-hour history. */ - maxi = (st.totsec - st.cursec) / 900; - if (maxi > 48) - maxi = 48; - for (i=0; i 48) - maxi = 48; - for (i=0; i= 0; - cfg_valid = ioctl (fd, SERIAL_GETCFG, &cfg) >= 0; - baud_valid = ioctl (fd, SERIAL_GETBAUD, &baud) >= 0; - loop_valid = ioctl (fd, SERIAL_GETLOOP, &loop) >= 0; - dpll_valid = ioctl (fd, SERIAL_GETDPLL, &dpll) >= 0; - nrzi_valid = ioctl (fd, SERIAL_GETNRZI, &nrzi) >= 0; - invclk_valid = ioctl (fd, SERIAL_GETINVCLK, &invclk) >= 0; - invrclk_valid = ioctl (fd, SERIAL_GETINVRCLK, &invrclk) >= 0; - invtclk_valid = ioctl (fd, SERIAL_GETINVTCLK, &invtclk) >= 0; - clk_valid = ioctl (fd, SERIAL_GETCLK, &clk) >= 0; - timeslots_valid = ioctl (fd, SERIAL_GETTIMESLOTS, ×lots) >= 0; - subchan_valid = ioctl (fd, SERIAL_GETSUBCHAN, &subchan) >= 0; - higain_valid = ioctl (fd, SERIAL_GETHIGAIN, &higain) >= 0; - phony_valid = ioctl (fd, SERIAL_GETPHONY, &phony) >= 0; - unfram_valid = ioctl (fd, SERIAL_GETUNFRAM, &unfram) >= 0; - monitor_valid = ioctl (fd, SERIAL_GETMONITOR, &monitor) >= 0; - use16_valid = ioctl (fd, SERIAL_GETUSE16, &use16) >= 0; - crc4_valid = ioctl (fd, SERIAL_GETCRC4, &crc4) >= 0; - ami_valid = ioctl (fd, SERIAL_GETLCODE, &ami) >= 0; - level_valid = ioctl (fd, SERIAL_GETLEVEL, &level) >= 0; - keepalive_valid = ioctl (fd, SERIAL_GETKEEPALIVE, &keepalive) >= 0; - debug_valid = ioctl (fd, SERIAL_GETDEBUG, &debug) >= 0; - port_valid = ioctl (fd, SERIAL_GETPORT, &port) >= 0; - cable_valid = ioctl (fd, SERIAL_GETCABLE, &cable) >= 0; - dir_valid = ioctl (fd, SERIAL_GETDIR, &dir) >= 0; - scrambler_valid = ioctl (fd, SERIAL_GETSCRAMBLER, &scrambler) >= 0; - cablen_valid = ioctl (fd, SERIAL_GETCABLEN, &cablen) >= 0; - rloop_valid = ioctl (fd, SERIAL_GETRLOOP, &rloop) >= 0; - mtu_valid = ioctl (fd, SERIAL_GETMTU, &mtu) >= 0; - rqlen_valid = ioctl (fd, SERIAL_GETRQLEN, &rqlen) >= 0; - - printf ("%s", chan_name); - if (port_valid) - switch (port) { - case 0: printf (" (rs232)"); break; - case 1: printf (" (v35)"); break; - case 2: printf (" (rs530)"); break; - } - else if (cable_valid) - switch (cable) { - case 0: printf (" (rs232)"); break; - case 1: printf (" (v35)"); break; - case 2: printf (" (rs530)"); break; - case 3: printf (" (x21)"); break; - case 4: printf (" (rs485)"); break; - case 9: printf (" (no cable)"); break; - } - if (debug_valid && debug) - printf (" debug=%d", debug); - if (protocol_valid && *protocol) - printf (" %.8s", protocol); - else - printf (" idle"); - if (cablen_valid) - printf (" cablen=%s", cablen ? "on" : "off"); - if (keepalive_valid) - printf (" keepalive=%s", keepalive ? "on" : "off"); - - if (cfg_valid) - switch (cfg) { - case 'a' : printf (" cfg=A"); break; - case 'b' : printf (" cfg=B"); break; - case 'c' : printf (" cfg=C"); break; - case 'd' : printf (" cfg=D"); break; - default : printf (" cfg=unknown"); - } - if (dir_valid) - printf (" dir=%d", dir); - - if (baud_valid) { - if (baud) - printf (" %ld", baud); - else - printf (" extclock"); - } - if (mtu_valid) - printf (" mtu=%d", mtu); - - if (aflag && rqlen_valid) - printf (" rqlen=%d", rqlen); - - if (clk_valid) - switch (clk) { - case E1CLK_INTERNAL: printf (" syn=int"); break; - case E1CLK_RECEIVE: printf (" syn=rcv"); break; - case E1CLK_RECEIVE_CHAN0: printf (" syn=rcv0"); break; - case E1CLK_RECEIVE_CHAN1: printf (" syn=rcv1"); break; - case E1CLK_RECEIVE_CHAN2: printf (" syn=rcv2"); break; - case E1CLK_RECEIVE_CHAN3: printf (" syn=rcv3"); break; - default: printf (" syn=%d", clk); break; - } - - if (dpll_valid) - printf (" dpll=%s", dpll ? "on" : "off"); - if (nrzi_valid) - printf (" nrzi=%s", nrzi ? "on" : "off"); - if (invclk_valid) - printf (" invclk=%s", invclk ? "on" : "off"); - if (invrclk_valid) - printf (" invrclk=%s", invrclk ? "on" : "off"); - if (invtclk_valid) - printf (" invtclk=%s", invtclk ? "on" : "off"); - if (unfram_valid) - printf (" unfram=%s", unfram ? "on" : "off"); - if (use16_valid) - printf (" use16=%s", use16 ? "on" : "off"); - if (aflag) { - if (crc4_valid) - printf (" crc4=%s", crc4 ? "on" : "off"); - if (higain_valid) - printf (" higain=%s", higain ? "on" : "off"); - if (monitor_valid) - printf (" monitor=%s", monitor ? "on" : "off"); - if (phony_valid) - printf (" phony=%s", phony ? "on" : "off"); - if (scrambler_valid) - printf (" scrambler=%s", scrambler ? "on" : "off"); - if (loop_valid) - printf (" loop=%s", loop ? "on" : "off"); - if (rloop_valid) - printf (" rloop=%s", rloop ? "on" : "off"); - if (ami_valid) - printf (" ami=%s", ami ? "on" : "off"); - } - if (timeslots_valid) - printf (" ts=%s", format_timeslots (timeslots)); - if (subchan_valid) - printf (" pass=%s", format_timeslots (subchan)); - if (level_valid) - printf (" (level=-%.1fdB)", level / 10.0); - printf ("\n"); -} - -static void -setup_chan (int fd, int argc, char **argv) -{ - int i, mode, loop, nrzi, dpll, invclk, phony, use16, crc4, unfram, ami; - int higain, clk, keepalive, debug, port, dlci, invrclk, invtclk; - int monitor, dir, scrambler, rloop, cablen; - int mode_valid; - long baud, timeslots, mtu, rqlen; - - for (i=0; i= '0' && argv[i][0] <= '9') { - baud = strtol (argv[i], 0, 10); - ioctl (fd, SERIAL_SETBAUD, &baud); - } else if (strcasecmp ("extclock", argv[i]) == 0) { - baud = 0; - ioctl (fd, SERIAL_SETBAUD, &baud); - } else if (strncasecmp ("cfg=", argv[i], 4) == 0) { - if (strncasecmp ("a", argv[i]+4, 1) == 0) - ioctl (fd, SERIAL_SETCFG, "a"); - else if (strncasecmp ("b", argv[i]+4, 1) == 0) - ioctl (fd, SERIAL_SETCFG, "b"); - else if (strncasecmp ("c", argv[i]+4, 1) == 0) - ioctl (fd, SERIAL_SETCFG, "c"); - else if (strncasecmp ("d", argv[i]+4, 1) == 0) - ioctl (fd, SERIAL_SETCFG, "d"); - else { - fprintf (stderr, "invalid cfg\n"); - exit (-1); - } - } else if (strcasecmp ("idle", argv[i]) == 0) - ioctl (fd, SERIAL_SETPROTO, "\0\0\0\0\0\0\0"); - else if (strcasecmp ("async", argv[i]) == 0) { - mode = SERIAL_ASYNC; - if (ioctl (fd, SERIAL_SETMODE, &mode) >= 0) - ioctl (fd, SERIAL_SETPROTO, "async\0\0"); - } else if (strcasecmp ("sync", argv[i]) == 0) { - mode = SERIAL_HDLC; - if (ioctl (fd, SERIAL_SETMODE, &mode) >= 0) - ioctl (fd, SERIAL_SETPROTO, "sync\0\0\0"); - } else if (strcasecmp ("cisco", argv[i]) == 0) { - mode = SERIAL_HDLC; - ioctl (fd, SERIAL_SETMODE, &mode); - ioctl (fd, SERIAL_SETPROTO, "cisco\0\0"); - } else if (strcasecmp ("rbrg", argv[i]) == 0) { - mode = SERIAL_HDLC; - ioctl (fd, SERIAL_SETMODE, &mode); - ioctl (fd, SERIAL_SETPROTO, "rbrg\0\0\0"); - } else if (strcasecmp ("raw", argv[i]) == 0) { - mode = SERIAL_HDLC; - ioctl (fd, SERIAL_SETMODE, &mode); - ioctl (fd, SERIAL_SETPROTO, "raw\0\0\0\0"); - } else if (strcasecmp ("packet", argv[i]) == 0) { - mode = SERIAL_HDLC; - ioctl (fd, SERIAL_SETMODE, &mode); - ioctl (fd, SERIAL_SETPROTO, "packet\0"); - } else if (strcasecmp ("ppp", argv[i]) == 0) { - /* check that ppp line discipline is present */ - if (ppp_ok ()) { - mode = SERIAL_HDLC; - ioctl (fd, SERIAL_SETMODE, &mode); - ioctl (fd, SERIAL_SETPROTO, "ppp\0\0\0\0"); - } - } else if (strncasecmp ("keepalive=", argv[i], 10) == 0) { - keepalive = (strcasecmp ("on", argv[i] + 10) == 0); - ioctl (fd, SERIAL_SETKEEPALIVE, &keepalive); - } else if (strcasecmp ("fr", argv[i]) == 0) { - mode = SERIAL_HDLC; - ioctl (fd, SERIAL_SETMODE, &mode); - ioctl (fd, SERIAL_SETPROTO, "fr\0\0\0\0\0"); - } else if (strcasecmp ("zaptel", argv[i]) == 0) { - mode = SERIAL_HDLC; - ioctl (fd, SERIAL_SETMODE, &mode); - ioctl (fd, SERIAL_SETPROTO, "zaptel\0"); - } else if (strncasecmp ("debug=", argv[i], 6) == 0) { - debug = strtol (argv[i]+6, 0, 10); - mode_valid = ioctl (fd, SERIAL_GETMODE, &mode) >= 0; - if (!mode_valid || mode != SERIAL_ASYNC) { - if (debug == 0) { - set_debug_ifconfig(0); - } else { - ioctl (fd, SERIAL_SETDEBUG, &debug); - set_debug_ifconfig(1); - } - } else { - ioctl (fd, SERIAL_SETDEBUG, &debug); - } - } else if (strncasecmp ("loop=", argv[i], 5) == 0) { - loop = (strcasecmp ("on", argv[i] + 5) == 0); - ioctl (fd, SERIAL_SETLOOP, &loop); - } else if (strncasecmp ("rloop=", argv[i], 6) == 0) { - rloop = (strcasecmp ("on", argv[i] + 6) == 0); - ioctl (fd, SERIAL_SETRLOOP, &rloop); - } else if (strncasecmp ("dpll=", argv[i], 5) == 0) { - dpll = (strcasecmp ("on", argv[i] + 5) == 0); - ioctl (fd, SERIAL_SETDPLL, &dpll); - } else if (strncasecmp ("nrzi=", argv[i], 5) == 0) { - nrzi = (strcasecmp ("on", argv[i] + 5) == 0); - ioctl (fd, SERIAL_SETNRZI, &nrzi); - } else if (strncasecmp ("invclk=", argv[i], 7) == 0) { - invclk = (strcasecmp ("on", argv[i] + 7) == 0); - ioctl (fd, SERIAL_SETINVCLK, &invclk); - } else if (strncasecmp ("invrclk=", argv[i], 8) == 0) { - invrclk = (strcasecmp ("on", argv[i] + 8) == 0); - ioctl (fd, SERIAL_SETINVRCLK, &invrclk); - } else if (strncasecmp ("invtclk=", argv[i], 8) == 0) { - invtclk = (strcasecmp ("on", argv[i] + 8) == 0); - ioctl (fd, SERIAL_SETINVTCLK, &invtclk); - } else if (strncasecmp ("higain=", argv[i], 7) == 0) { - higain = (strcasecmp ("on", argv[i] + 7) == 0); - ioctl (fd, SERIAL_SETHIGAIN, &higain); - } else if (strncasecmp ("phony=", argv[i], 6) == 0) { - phony = (strcasecmp ("on", argv[i] + 6) == 0); - ioctl (fd, SERIAL_SETPHONY, &phony); - } else if (strncasecmp ("unfram=", argv[i], 7) == 0) { - unfram = (strcasecmp ("on", argv[i] + 7) == 0); - ioctl (fd, SERIAL_SETUNFRAM, &unfram); - } else if (strncasecmp ("scrambler=", argv[i], 10) == 0) { - scrambler = (strcasecmp ("on", argv[i] + 10) == 0); - ioctl (fd, SERIAL_SETSCRAMBLER, &scrambler); - } else if (strncasecmp ("monitor=", argv[i], 8) == 0) { - monitor = (strcasecmp ("on", argv[i] + 8) == 0); - ioctl (fd, SERIAL_SETMONITOR, &monitor); - } else if (strncasecmp ("use16=", argv[i], 6) == 0) { - use16 = (strcasecmp ("on", argv[i] + 6) == 0); - ioctl (fd, SERIAL_SETUSE16, &use16); - } else if (strncasecmp ("crc4=", argv[i], 5) == 0) { - crc4 = (strcasecmp ("on", argv[i] + 5) == 0); - ioctl (fd, SERIAL_SETCRC4, &crc4); - } else if (strncasecmp ("ami=", argv[i], 4) == 0) { - ami = (strcasecmp ("on", argv[i] + 4) == 0); - ioctl (fd, SERIAL_SETLCODE, &ami); - } else if (strncasecmp ("mtu=", argv[i], 4) == 0) { - mtu = strtol (argv[i] + 4, 0, 10); - ioctl (fd, SERIAL_SETMTU, &mtu); - } else if (strncasecmp ("rqlen=", argv[i], 6) == 0) { - rqlen = strtol (argv[i] + 6, 0, 10); - ioctl (fd, SERIAL_SETRQLEN, &rqlen); - } else if (strcasecmp ("syn=int", argv[i]) == 0) { - clk = E1CLK_INTERNAL; - ioctl (fd, SERIAL_SETCLK, &clk); - } else if (strcasecmp ("syn=rcv", argv[i]) == 0) { - clk = E1CLK_RECEIVE; - ioctl (fd, SERIAL_SETCLK, &clk); - } else if (strcasecmp ("syn=rcv0", argv[i]) == 0) { - clk = E1CLK_RECEIVE_CHAN0; - ioctl (fd, SERIAL_SETCLK, &clk); - } else if (strcasecmp ("syn=rcv1", argv[i]) == 0) { - clk = E1CLK_RECEIVE_CHAN1; - ioctl (fd, SERIAL_SETCLK, &clk); - } else if (strcasecmp ("syn=rcv2", argv[i]) == 0) { - clk = E1CLK_RECEIVE_CHAN2; - ioctl (fd, SERIAL_SETCLK, &clk); - } else if (strcasecmp ("syn=rcv3", argv[i]) == 0) { - clk = E1CLK_RECEIVE_CHAN3; - ioctl (fd, SERIAL_SETCLK, &clk); - } else if (strncasecmp ("ts=", argv[i], 3) == 0) { - timeslots = scan_timeslots (argv[i] + 3); - ioctl (fd, SERIAL_SETTIMESLOTS, ×lots); - } else if (strncasecmp ("pass=", argv[i], 5) == 0) { - timeslots = scan_timeslots (argv[i] + 5); - ioctl (fd, SERIAL_SETSUBCHAN, ×lots); - } else if (strncasecmp ("dlci", argv[i], 4) == 0) { - dlci = strtol (argv[i]+4, 0, 10); - ioctl (fd, SERIAL_ADDDLCI, &dlci); - } else if (strncasecmp ("dir=", argv[i], 4) == 0) { - dir = strtol (argv[i]+4, 0, 10); - ioctl (fd, SERIAL_SETDIR, &dir); - } else if (strncasecmp ("port=", argv[i], 5) == 0) { - if (strncasecmp ("rs232", argv[i]+5, 5) == 0) { - port = 0; - ioctl (fd, SERIAL_SETPORT, &port); - } else if (strncasecmp ("v35", argv[i]+5, 3) == 0) { - port = 1; - ioctl (fd, SERIAL_SETPORT, &port); - } else if (strncasecmp ("rs449", argv[i]+5, 5) == 0) { - port = 2; - ioctl (fd, SERIAL_SETPORT, &port); - } else { - fprintf (stderr, "invalid port type\n"); - exit (-1); - } -#if 1 - } else if (strcasecmp ("reset", argv[i]) == 0) { - ioctl (fd, SERIAL_RESET, 0); - } else if (strcasecmp ("hwreset", argv[i]) == 0) { - ioctl (fd, SERIAL_HARDRESET, 0); -#endif - } else if (strncasecmp ("cablen=", argv[i], 7) == 0) { - loop = (strcasecmp ("on", argv[i] + 7) == 0); - ioctl (fd, SERIAL_SETCABLEN, &cablen); - } - } -} - -static void -get_mask (void) -{ -#ifdef __linux__ - int fd; - - fd = open ("/dev/serial/ctl0", 0); - if (fd < 0) { - perror ("/dev/serial/ctl0"); - exit (-1); - } - if (ioctl (fd, SERIAL_GETREGISTERED, &mask) < 0) { - perror ("getting list of channels"); - exit (-1); - } - close (fd); -#else - int fd, fd1, fd2, fd3, i; - char buf [80]; - - for (i=0, fd=-1; i<12 && fd<0; i++) { - sprintf (buf, "/dev/cx%d", i*4); - fd = open (buf, 0); - } - - for (i=0, fd1=-1; i<3 && fd1<0; i++) { - sprintf (buf, "/dev/ct%d", i*2); - fd1 = open (buf, 0); - } - - for (i=0, fd2=-1; i<3 && fd2<0; i++) { - sprintf (buf, "/dev/cp%d", i*4); - fd2 = open (buf, 0); - } - - /* Try only one */ - for (i=0, fd3=-1; i<1 && fd3<0; i++) { - sprintf (buf, "/dev/ce%d", i*4); - fd3 = open (buf, 0); - } - - if ((fd < 0) && (fd1 < 0) && (fd2 < 0) && (fd3 < 0)) { - fprintf (stderr, "No Cronyx adapters installed\n"); - exit (-1); - } - - if (fd >= 0) { - if (ioctl (fd, SERIAL_GETREGISTERED, &mask) < 0) { - perror ("getting list of channels"); - exit (-1); - } - close (fd); - } - - if (fd1 >= 0) { - if (ioctl (fd1, SERIAL_GETREGISTERED, (mask+16)) < 0) { - perror ("getting list of channels"); - exit (-1); - } - close (fd1); - } - - if (fd2 >= 0) { - if (ioctl (fd2, SERIAL_GETREGISTERED, (mask+32)) < 0) { - perror ("getting list of channels"); - exit (-1); - } - close (fd2); - } - - if (fd3 >= 0) { - if (ioctl (fd3, SERIAL_GETREGISTERED, (mask+48)) < 0) { - perror ("getting list of channels"); - exit (-1); - } - close (fd3); - } -#endif -} - -static int -open_chan_ctl (int num) -{ - char device [80]; - int fd; - -#ifdef __linux__ - sprintf (device, "/dev/serial/ctl%d", num); -#else - switch (adapter_type) { - case 0: - sprintf (device, "/dev/cx%d", num); - break; - case 1: - sprintf (device, "/dev/ct%d", num); - break; - case 2: - sprintf (device, "/dev/cp%d", num); - break; - case 3: - sprintf (device, "/dev/ce%d", num); - break; - } -#endif - fd = open (device, 0); - if (fd < 0) { - if (errno == ENODEV) - fprintf (stderr, "chan%d: not configured\n", num); - else - perror (device); - exit (-1); - } -#ifdef __linux__ - if (ioctl (fd, SERIAL_GETNAME, &chan_name) < 0) - sprintf (chan_name, "chan%d", num); -#else - switch (adapter_type) { - case 0: sprintf (chan_name, "cx%d", num); break; - case 1: sprintf (chan_name, "ct%d", num); break; - case 2: sprintf (chan_name, "cp%d", num); break; - case 3: sprintf (chan_name, "ce%d", num); break; - } -#endif - return fd; -} - -int -main (int argc, char **argv) -{ - char *p; - int fd, need_header, chan_num; - - if (argc > 1 && strcmp(argv[1], "help") == 0) - usage(); - - for (;;) { - switch (getopt (argc, argv, "mseftucviax")) { - case -1: - break; - case 'a': - ++aflag; - continue; - case 'm': - ++mflag; - continue; - case 's': - ++sflag; - continue; - case 'e': - ++eflag; - continue; - case 'f': - ++eflag; - ++fflag; - continue; - case 't': - ++tflag; - continue; - case 'u': - ++tflag; - ++uflag; - continue; - case 'c': - ++cflag; - continue; - case 'v': - ++vflag; - continue; - case 'i': - ++iflag; - continue; - case 'x': - ++xflag; - continue; - default: - usage(); - } - break; - } - argc -= optind; - argv += optind; - - if (argc <= 0) { - get_mask (); - need_header = 1; - adapter_type = 0; -#ifndef __linux__ - for (; adapter_type < 4; ++adapter_type) -#endif - { - for (chan_num=0; chan_num= 0) { - printf ("Version: %s\n", buf); - close (fd); - return (0); - } -#endif - } - if (iflag) { - print_chan (fd); - print_ifconfig (fd); - } else if (sflag||xflag) - print_stats (fd, need_header); - else if (mflag) - print_modems (fd, need_header); - else if (eflag) - print_e1_stats (fd, need_header); - else if (tflag) - print_e3_stats (fd, need_header); - else if (cflag) - clear_stats (fd); - else - print_chan (fd); - close (fd); - need_header = 0; - } - } - return (0); - } - - p = argv[0] + strlen (argv[0]); - while (p > argv[0] && p[-1] >= '0' && p[-1] <= '9') - --p; - chan_num = strtol (p, 0, 10); -#ifndef __linux__ - if (strncasecmp ("cx", argv[0], 2)==0) - adapter_type = 0; - else if (strncasecmp ("ct", argv[0], 2)==0) - adapter_type = 1; - else if (strncasecmp ("cp", argv[0], 2)==0) - adapter_type = 2; - else if (strncasecmp ("ce", argv[0], 2)==0) - adapter_type = 3; - else { - fprintf (stderr, "Wrong channel name\n"); - exit (-1); - } -#endif - argc--; - argv++; - - fd = open_chan_ctl (chan_num); - if (vflag) { -#ifdef __linux__ - char buf[256]; - if (ioctl (fd, SERIAL_GETVERSIONSTRING, &buf) >= 0) - printf ("Version: %s\n", buf); -#endif - } - if (iflag) { - print_chan (fd); - print_ifconfig (fd); - close (fd); - return (0); - } - if (sflag||xflag) { - print_stats (fd, 1); - close (fd); - return (0); - } - if (mflag) { - print_modems (fd, 1); - close (fd); - return (0); - } - if (eflag) { - print_e1_stats (fd, 1); - close (fd); - return (0); - } - if (tflag) { - print_e3_stats (fd, 1); - close (fd); - return (0); - } - if (cflag) { - clear_stats (fd); - close (fd); - return (0); - } - if (argc > 0) - setup_chan (fd, argc, argv); - else - print_chan (fd); - close (fd); - return (0); -} diff --git a/targets/pseudo/userland/Makefile.depend b/targets/pseudo/userland/Makefile.depend index c08a6eaae0bb..19e3d754cffa 100644 --- a/targets/pseudo/userland/Makefile.depend +++ b/targets/pseudo/userland/Makefile.depend @@ -784,7 +784,6 @@ DIRDEPS.i386= \ sbin/bsdlabel \ sbin/fdisk \ sbin/nvmecontrol \ - sbin/sconfig \ usr.sbin/apm \ usr.sbin/apmd \ usr.sbin/btxld \ -- cgit v1.2.3