From b5858b4a6b57bd2fc6a0586f9bea03364ea1da69 Mon Sep 17 00:00:00 2001 From: cvs2svn Date: Fri, 3 Feb 2006 20:55:31 +0000 Subject: This commit was manufactured by cvs2svn to create branch 'RELENG_5'. --- sys/dev/mpt/mpilib/mpi_inb.h | 250 ++++++++++++++++++++++++++ sys/dev/mpt/mpilib/mpi_log_fc.h | 117 ++++++++++++ sys/dev/mpt/mpilib/mpi_log_sas.h | 181 +++++++++++++++++++ sys/dev/mpt/mpilib/mpi_tool.h | 380 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 928 insertions(+) create mode 100644 sys/dev/mpt/mpilib/mpi_inb.h create mode 100644 sys/dev/mpt/mpilib/mpi_log_fc.h create mode 100644 sys/dev/mpt/mpilib/mpi_log_sas.h create mode 100644 sys/dev/mpt/mpilib/mpi_tool.h (limited to 'sys/dev/mpt') diff --git a/sys/dev/mpt/mpilib/mpi_inb.h b/sys/dev/mpt/mpilib/mpi_inb.h new file mode 100644 index 000000000000..9239ecfa318d --- /dev/null +++ b/sys/dev/mpt/mpilib/mpi_inb.h @@ -0,0 +1,250 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon including + * a substantially similar Disclaimer requirement for further binary + * redistribution. + * 3. Neither the name of the LSI Logic Corporation nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT + * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* + * Copyright (c) 2003-2004 LSI Logic Corporation. + * + * + * Name: mpi_inb.h + * Title: MPI Inband structures and definitions + * Creation Date: September 30, 2003 + * + * mpi_inb.h Version: 01.05.01 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-11-04 01.03.01 Original release. + * 08-19-04 01.05.01 Original release for MPI v1.5. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_INB_H +#define MPI_INB_H + +/****************************************************************************** +* +* I n b a n d M e s s a g e s +* +*******************************************************************************/ + + +/****************************************************************************/ +/* Inband Buffer Post Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_BUFFER_POST_REQUEST +{ + U8 Reserved1; /* 00h */ + U8 BufferCount; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + SGE_TRANS_SIMPLE_UNION SGL; /* 10h */ +} MSG_INBAND_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REQUEST, + MpiInbandBufferPostRequest_t , MPI_POINTER pMpiInbandBufferPostRequest_t; + + +typedef struct _WWN_FC_FORMAT +{ + U64 NodeName; /* 00h */ + U64 PortName; /* 08h */ +} WWN_FC_FORMAT, MPI_POINTER PTR_WWN_FC_FORMAT, + WwnFcFormat_t, MPI_POINTER pWwnFcFormat_t; + +typedef struct _WWN_SAS_FORMAT +{ + U64 WorldWideID; /* 00h */ + U32 Reserved1; /* 08h */ + U32 Reserved2; /* 0Ch */ +} WWN_SAS_FORMAT, MPI_POINTER PTR_WWN_SAS_FORMAT, + WwnSasFormat_t, MPI_POINTER pWwnSasFormat_t; + +typedef union _WWN_INBAND_FORMAT +{ + WWN_FC_FORMAT Fc; + WWN_SAS_FORMAT Sas; +} WWN_INBAND_FORMAT, MPI_POINTER PTR_WWN_INBAND_FORMAT, + WwnInbandFormat, MPI_POINTER pWwnInbandFormat; + + +/* Inband Buffer Post reply message */ + +typedef struct _MSG_INBAND_BUFFER_POST_REPLY +{ + U16 Reserved1; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TransferLength; /* 14h */ + U32 TransactionContext; /* 18h */ + WWN_INBAND_FORMAT Wwn; /* 1Ch */ + U32 IOCIdentifier[4]; /* 2Ch */ +} MSG_INBAND_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REPLY, + MpiInbandBufferPostReply_t, MPI_POINTER pMpiInbandBufferPostReply_t; + + +/****************************************************************************/ +/* Inband Send Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_SEND_REQUEST +{ + U16 Reserved1; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + WWN_INBAND_FORMAT Wwn; /* 10h */ + U32 Reserved5; /* 20h */ + SGE_IO_UNION SGL; /* 24h */ +} MSG_INBAND_SEND_REQUEST, MPI_POINTER PTR_MSG_INBAND_SEND_REQUEST, + MpiInbandSendRequest_t , MPI_POINTER pMpiInbandSendRequest_t; + + +/* Inband Send reply message */ + +typedef struct _MSG_INBAND_SEND_REPLY +{ + U16 Reserved1; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ResponseLength; /* 14h */ +} MSG_INBAND_SEND_REPLY, MPI_POINTER PTR_MSG_INBAND_SEND_REPLY, + MpiInbandSendReply_t, MPI_POINTER pMpiInbandSendReply_t; + + +/****************************************************************************/ +/* Inband Response Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_RSP_REQUEST +{ + U16 Reserved1; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + WWN_INBAND_FORMAT Wwn; /* 10h */ + U32 IOCIdentifier[4]; /* 20h */ + U32 ResponseLength; /* 30h */ + SGE_IO_UNION SGL; /* 34h */ +} MSG_INBAND_RSP_REQUEST, MPI_POINTER PTR_MSG_INBAND_RSP_REQUEST, + MpiInbandRspRequest_t , MPI_POINTER pMpiInbandRspRequest_t; + + +/* Inband Response reply message */ + +typedef struct _MSG_INBAND_RSP_REPLY +{ + U16 Reserved1; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_INBAND_RSP_REPLY, MPI_POINTER PTR_MSG_INBAND_RSP_REPLY, + MpiInbandRspReply_t, MPI_POINTER pMpiInbandRspReply_t; + + +/****************************************************************************/ +/* Inband Abort Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_ABORT_REQUEST +{ + U8 Reserved1; /* 00h */ + U8 AbortType; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + U32 ContextToAbort; /* 10h */ +} MSG_INBAND_ABORT_REQUEST, MPI_POINTER PTR_MSG_INBAND_ABORT_REQUEST, + MpiInbandAbortRequest_t , MPI_POINTER pMpiInbandAbortRequest_t; + +#define MPI_INBAND_ABORT_TYPE_ALL_BUFFERS (0x00) +#define MPI_INBAND_ABORT_TYPE_EXACT_BUFFER (0x01) +#define MPI_INBAND_ABORT_TYPE_SEND_REQUEST (0x02) +#define MPI_INBAND_ABORT_TYPE_RESPONSE_REQUEST (0x03) + + +/* Inband Abort reply message */ + +typedef struct _MSG_INBAND_ABORT_REPLY +{ + U8 Reserved1; /* 00h */ + U8 AbortType; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_INBAND_ABORT_REPLY, MPI_POINTER PTR_MSG_INBAND_ABORT_REPLY, + MpiInbandAbortReply_t, MPI_POINTER pMpiInbandAbortReply_t; + + +#endif diff --git a/sys/dev/mpt/mpilib/mpi_log_fc.h b/sys/dev/mpt/mpilib/mpi_log_fc.h new file mode 100644 index 000000000000..73cd941ab9d0 --- /dev/null +++ b/sys/dev/mpt/mpilib/mpi_log_fc.h @@ -0,0 +1,117 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon including + * a substantially similar Disclaimer requirement for further binary + * redistribution. + * 3. Neither the name of the LSI Logic Corporation nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT + * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * NAME: fc_log.h + * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips + * DESCRIPTION: Contains the enumerated list of values that may be returned + * in the IOCLogInfo field of a MPI Default Reply Message. + * + * CREATION DATE: 6/02/2000 + * ID: $Id: //prod/main/platform/os/linux/drivers/message/fusion/lsi/mpi_log_fc.h#1 $ + */ + + +/* + * MpiIocLogInfo_t enum + * + * These 32 bit values are used in the IOCLogInfo field of the MPI reply + * messages. + * The value is 0xabcccccc where + * a = The type of log info as per the MPI spec. Since these codes are + * all for Fibre Channel this value will always be 2. + * b = Specifies a subclass of the firmware where + * 0 = FCP Initiator + * 1 = FCP Target + * 2 = LAN + * 3 = MPI Message Layer + * 4 = FC Link + * 5 = Context Manager + * 6 = Invalid Field Offset + * 7 = State Change Info + * all others are reserved for future use + * c = A specific value within the subclass. + * + * NOTE: Any new values should be added to the end of each subclass so that the + * codes remain consistent across firmware releases. + */ +typedef enum _MpiIocLogInfoFc +{ + MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, + MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ + MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ + MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */ + MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */ + MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */ + + MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000, + MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */ + MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */ + MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */ + MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */ + MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */ + MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */ + MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */ + MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */ + + MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000, + MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */ + MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */ + MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */ + MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */ + + MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000, + + MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000, + MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */ + MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */ + MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */ + MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */ + + MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000, + + MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */ + MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff, + + MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */ + +} MpiIocLogInfoFc_t; diff --git a/sys/dev/mpt/mpilib/mpi_log_sas.h b/sys/dev/mpt/mpilib/mpi_log_sas.h new file mode 100644 index 000000000000..2c0a358612a1 --- /dev/null +++ b/sys/dev/mpt/mpilib/mpi_log_sas.h @@ -0,0 +1,181 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon including + * a substantially similar Disclaimer requirement for further binary + * redistribution. + * 3. Neither the name of the LSI Logic Corporation nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT + * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * * + *************************************************************************** + * + * Name: iopiIocLogInfo.h + * Title: SAS Firmware IOP Interface IOC Log Info Definitions + * Programmer: Guy Kendall + * Creation Date: September 24, 2003 + * + * Version History + * --------------- + * + * Last Updated + * ------------- + * Version %version: 22 % + * Date Updated %date_modified: % + * Programmer %created_by: nperucca % + * + * Date Who Description + * -------- --- ------------------------------------------------------- + * 09/24/03 GWK Initial version + * + * + * Description + * ------------ + * This include file contains SAS firmware interface IOC Log Info codes + * + *------------------------------------------------------------------------- + */ + +#ifndef IOPI_IOCLOGINFO_H_INCLUDED +#define IOPI_IOCLOGINFO_H_INCLUDED + + +/****************************************************************************/ +/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ +/* Format: */ +/* Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3) */ +/* Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR */ +/* Bits 23-16: LOGINFO_CODE */ +/* Bits 15-0: LOGINFO_CODE Specific */ +/****************************************************************************/ + +/****************************************************************************/ +/* IOC_LOGINFO_ORIGINATOR defines */ +/****************************************************************************/ +#define IOC_LOGINFO_ORIGINATOR_IOP (0x00000000) +#define IOC_LOGINFO_ORIGINATOR_PL (0x01000000) +#define IOC_LOGINFO_ORIGINATOR_IR (0x02000000) + +/****************************************************************************/ +/* LOGINFO_CODE defines */ +/****************************************************************************/ +#define IOC_LOGINFO_CODE_MASK (0x00FF0000) +#define IOC_LOGINFO_CODE_SHIFT (16) + +/****************************************************************************/ +/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */ +/****************************************************************************/ +#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000) +#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000) +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000) +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ +#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) + + +/****************************************************************************/ +/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */ +/****************************************************************************/ +#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) +#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000) +#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000) +#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000) +#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000) +#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000) +#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000) +#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000) +#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000) +#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000) +#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000) +#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000) +#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000) +#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000) +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000) +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */ +#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000) +#define PL_LOGINFO_CODE_RESET (0x00110000) +#define PL_LOGINFO_CODE_ABORT (0x00120000) +#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000) +#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) +#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200) +#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300) +#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) +#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500) +#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600) +#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700) +#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800) +#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900) +#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00) +#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00) +#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00) +#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00) +#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00) +#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000) + + +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */ +#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */ +#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */ +#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */ + +#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */ +#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */ +#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */ +#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */ +#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/ + + +/****************************************************************************/ +/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */ +/****************************************************************************/ +#define IR_LOGINFO_CODE_UNUSED1 (0x00010000) +#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) + +/****************************************************************************/ +/* Defines for convienence */ +/****************************************************************************/ +#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP) +#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL) +#define IOC_LOGINFO_PREFIX_IR ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR) + +#endif /* end of file */ diff --git a/sys/dev/mpt/mpilib/mpi_tool.h b/sys/dev/mpt/mpilib/mpi_tool.h new file mode 100644 index 000000000000..14c44110133a --- /dev/null +++ b/sys/dev/mpt/mpilib/mpi_tool.h @@ -0,0 +1,380 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon including + * a substantially similar Disclaimer requirement for further binary + * redistribution. + * 3. Neither the name of the LSI Logic Corporation nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT + * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * Name: mpi_tool.h + * Title: MPI Toolbox structures and definitions + * Creation Date: July 30, 2001 + * + * mpi_tool.h Version: 01.05.03 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 08-08-01 01.02.01 Original release. + * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines. + * 01-16-04 01.02.03 Added defines and structures for new tools + *. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and + * MPI_TOOLBOX_FC_MANAGEMENT_TOOL. + * 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and + * Diagnostic Release requests and replies. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. + * 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT. + * 02-09-05 01.05.03 Added frame size option to FC management tool. + * Added Beacon tool to the Toolbox. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_TOOL_H +#define MPI_TOOL_H + +#define MPI_TOOLBOX_CLEAN_TOOL (0x00) +#define MPI_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02) +#define MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) +#define MPI_TOOLBOX_FC_MANAGEMENT_TOOL (0x04) +#define MPI_TOOLBOX_BEACON_TOOL (0x05) + + +/****************************************************************************/ +/* Toolbox reply */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_REPLY +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_TOOLBOX_REPLY, MPI_POINTER PTR_MSG_TOOLBOX_REPLY, + ToolboxReply_t, MPI_POINTER pToolboxReply_t; + + +/****************************************************************************/ +/* Toolbox Clean Tool request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_CLEAN_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Flags; /* 0Ch */ +} MSG_TOOLBOX_CLEAN_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_CLEAN_REQUEST, + ToolboxCleanRequest_t, MPI_POINTER pToolboxCleanRequest_t; + +#define MPI_TOOLBOX_CLEAN_NVSRAM (0x00000001) +#define MPI_TOOLBOX_CLEAN_SEEPROM (0x00000002) +#define MPI_TOOLBOX_CLEAN_FLASH (0x00000004) +#define MPI_TOOLBOX_CLEAN_BOOTLOADER (0x04000000) +#define MPI_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) +#define MPI_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) +#define MPI_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000) +#define MPI_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000) + + +/****************************************************************************/ +/* Toolbox Memory Move request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_MEM_MOVE_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + SGE_SIMPLE_UNION SGL; /* 0Ch */ +} MSG_TOOLBOX_MEM_MOVE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_MEM_MOVE_REQUEST, + ToolboxMemMoveRequest_t, MPI_POINTER pToolboxMemMoveRequest_t; + + +/****************************************************************************/ +/* Toolbox Diagnostic Data Upload request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Flags; /* 0Ch */ + U32 Reserved3; /* 10h */ + SGE_SIMPLE_UNION SGL; /* 14h */ +} MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, + ToolboxDiagDataUploadRequest_t, MPI_POINTER pToolboxDiagDataUploadRequest_t; + +typedef struct _DIAG_DATA_UPLOAD_HEADER +{ + U32 DiagDataLength; /* 00h */ + U8 FormatCode; /* 04h */ + U8 Reserved; /* 05h */ + U16 Reserved1; /* 06h */ +} DIAG_DATA_UPLOAD_HEADER, MPI_POINTER PTR_DIAG_DATA_UPLOAD_HEADER, + DiagDataUploadHeader_t, MPI_POINTER pDiagDataUploadHeader_t; + +#define MPI_TB_DIAG_FORMAT_SCSI_PRINTF_1 (0x01) +#define MPI_TB_DIAG_FORMAT_SCSI_2 (0x02) +#define MPI_TB_DIAG_FORMAT_SCSI_3 (0x03) +#define MPI_TB_DIAG_FORMAT_FC_TRACE_1 (0x04) + + +/****************************************************************************/ +/* Toolbox ISTWI Read Write request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Flags; /* 0Ch */ + U8 BusNum; /* 0Dh */ + U16 Reserved3; /* 0Eh */ + U8 NumAddressBytes; /* 10h */ + U8 Reserved4; /* 11h */ + U16 DataLength; /* 12h */ + U8 DeviceAddr; /* 14h */ + U8 Addr1; /* 15h */ + U8 Addr2; /* 16h */ + U8 Addr3; /* 17h */ + U32 Reserved5; /* 18h */ + SGE_SIMPLE_UNION SGL; /* 1Ch */ +} MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + ToolboxIstwiReadWriteRequest_t, MPI_POINTER pToolboxIstwiReadWriteRequest_t; + +#define MPI_TB_ISTWI_FLAGS_WRITE (0x00) +#define MPI_TB_ISTWI_FLAGS_READ (0x01) + + +/****************************************************************************/ +/* Toolbox FC Management request */ +/****************************************************************************/ + +/* ActionInfo for Bus and TargetId */ +typedef struct _MPI_TB_FC_MANAGE_BUS_TID_AI +{ + U16 Reserved; /* 00h */ + U8 Bus; /* 02h */ + U8 TargetId; /* 03h */ +} MPI_TB_FC_MANAGE_BUS_TID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_BUS_TID_AI, + MpiTbFcManageBusTidAi_t, MPI_POINTER pMpiTbFcManageBusTidAi_t; + +/* ActionInfo for port identifier */ +typedef struct _MPI_TB_FC_MANAGE_PID_AI +{ + U32 PortIdentifier; /* 00h */ +} MPI_TB_FC_MANAGE_PID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_PID_AI, + MpiTbFcManagePidAi_t, MPI_POINTER pMpiTbFcManagePidAi_t; + +/* ActionInfo for set max frame size */ +typedef struct _MPI_TB_FC_MANAGE_FRAME_SIZE_AI +{ + U16 FrameSize; /* 00h */ + U8 PortNum; /* 02h */ + U8 Reserved1; /* 03h */ +} MPI_TB_FC_MANAGE_FRAME_SIZE_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_FRAME_SIZE_AI, + MpiTbFcManageFrameSizeAi_t, MPI_POINTER pMpiTbFcManageFrameSizeAi_t; + +/* union of ActionInfo */ +typedef union _MPI_TB_FC_MANAGE_AI_UNION +{ + MPI_TB_FC_MANAGE_BUS_TID_AI BusTid; + MPI_TB_FC_MANAGE_PID_AI Port; + MPI_TB_FC_MANAGE_FRAME_SIZE_AI FrameSize; +} MPI_TB_FC_MANAGE_AI_UNION, MPI_POINTER PTR_MPI_TB_FC_MANAGE_AI_UNION, + MpiTbFcManageAiUnion_t, MPI_POINTER pMpiTbFcManageAiUnion_t; + +typedef struct _MSG_TOOLBOX_FC_MANAGE_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Action; /* 0Ch */ + U8 Reserved3; /* 0Dh */ + U16 Reserved4; /* 0Eh */ + MPI_TB_FC_MANAGE_AI_UNION ActionInfo; /* 10h */ +} MSG_TOOLBOX_FC_MANAGE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_FC_MANAGE_REQUEST, + ToolboxFcManageRequest_t, MPI_POINTER pToolboxFcManageRequest_t; + +/* defines for the Action field */ +#define MPI_TB_FC_MANAGE_ACTION_DISC_ALL (0x00) +#define MPI_TB_FC_MANAGE_ACTION_DISC_PID (0x01) +#define MPI_TB_FC_MANAGE_ACTION_DISC_BUS_TID (0x02) +#define MPI_TB_FC_MANAGE_ACTION_SET_MAX_FRAME_SIZE (0x03) + + +/****************************************************************************/ +/* Toolbox Beacon Tool request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_BEACON_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 ConnectNum; /* 0Ch */ + U8 PortNum; /* 0Dh */ + U8 Reserved3; /* 0Eh */ + U8 Flags; /* 0Fh */ +} MSG_TOOLBOX_BEACON_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_BEACON_REQUEST, + ToolboxBeaconRequest_t, MPI_POINTER pToolboxBeaconRequest_t; + +#define MPI_TOOLBOX_FLAGS_BEACON_MODE_OFF (0x00) +#define MPI_TOOLBOX_FLAGS_BEACON_MODE_ON (0x01) + + +/****************************************************************************/ +/* Diagnostic Buffer Post request */ +/****************************************************************************/ + +typedef struct _MSG_DIAG_BUFFER_POST_REQUEST +{ + U8 TraceLevel; /* 00h */ + U8 BufferType; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 ExtendedType; /* 0Ch */ + U32 BufferLength; /* 10h */ + U32 ProductSpecific[4]; /* 14h */ + U32 Reserved3; /* 24h */ + U64 BufferAddress; /* 28h */ +} MSG_DIAG_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REQUEST, + DiagBufferPostRequest_t, MPI_POINTER pDiagBufferPostRequest_t; + +#define MPI_DIAG_BUF_TYPE_TRACE (0x00) +#define MPI_DIAG_BUF_TYPE_SNAPSHOT (0x01) +#define MPI_DIAG_BUF_TYPE_EXTENDED (0x02) +/* count of the number of buffer types */ +#define MPI_DIAG_BUF_TYPE_COUNT (0x03) + +#define MPI_DIAG_EXTENDED_QTAG (0x00000001) + + +/* Diagnostic Buffer Post reply */ +typedef struct _MSG_DIAG_BUFFER_POST_REPLY +{ + U8 Reserved1; /* 00h */ + U8 BufferType; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TransferLength; /* 14h */ +} MSG_DIAG_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REPLY, + DiagBufferPostReply_t, MPI_POINTER pDiagBufferPostReply_t; + + +/****************************************************************************/ +/* Diagnostic Release request */ +/****************************************************************************/ + +typedef struct _MSG_DIAG_RELEASE_REQUEST +{ + U8 Reserved1; /* 00h */ + U8 BufferType; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ +} MSG_DIAG_RELEASE_REQUEST, MPI_POINTER PTR_MSG_DIAG_RELEASE_REQUEST, + DiagReleaseRequest_t, MPI_POINTER pDiagReleaseRequest_t; + + +/* Diagnostic Release reply */ +typedef struct _MSG_DIAG_RELEASE_REPLY +{ + U8 Reserved1; /* 00h */ + U8 BufferType; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_DIAG_RELEASE_REPLY, MPI_POINTER PTR_MSG_DIAG_RELEASE_REPLY, + DiagReleaseReply_t, MPI_POINTER pDiagReleaseReply_t; + + +#endif -- cgit v1.3