/*- * Copyright (c) 2008 Yahoo!, Inc. * All rights reserved. * Written by: John Baldwin * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD userland interface */ /*- * Copyright (c) 2011-2015 LSI Corp. * Copyright (c) 2013-2016 Avago Technologies * Copyright 2000-2020 Broadcom Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD */ #include /* TODO Move headers to mprvar */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static d_open_t mpr_open; static d_close_t mpr_close; static d_ioctl_t mpr_ioctl_devsw; static struct cdevsw mpr_cdevsw = { .d_version = D_VERSION, .d_flags = 0, .d_open = mpr_open, .d_close = mpr_close, .d_ioctl = mpr_ioctl_devsw, .d_name = "mpr", }; typedef int (mpr_user_f)(struct mpr_command *, struct mpr_usr_command *); static mpr_user_f mpi_pre_ioc_facts; static mpr_user_f mpi_pre_port_facts; static mpr_user_f mpi_pre_fw_download; static mpr_user_f mpi_pre_fw_upload; static mpr_user_f mpi_pre_sata_passthrough; static mpr_user_f mpi_pre_smp_passthrough; static mpr_user_f mpi_pre_config; static mpr_user_f mpi_pre_sas_io_unit_control; static int mpr_user_read_cfg_header(struct mpr_softc *, struct mpr_cfg_page_req *); static int mpr_user_read_cfg_page(struct mpr_softc *, struct mpr_cfg_page_req *, void *); static int mpr_user_read_extcfg_header(struct mpr_softc *, struct mpr_ext_cfg_page_req *); static int mpr_user_read_extcfg_page(struct mpr_softc *, struct mpr_ext_cfg_page_req *, void *); static int mpr_user_write_cfg_page(struct mpr_softc *, struct mpr_cfg_page_req *, void *); static int mpr_user_setup_request(struct mpr_command *, struct mpr_usr_command *); static int mpr_user_command(struct mpr_softc *, struct mpr_usr_command *); static int mpr_user_pass_thru(struct mpr_softc *sc, mpr_pass_thru_t *data); static void mpr_user_get_adapter_data(struct mpr_softc *sc, mpr_adapter_data_t *data); static void mpr_user_read_pci_info(struct mpr_softc *sc, mpr_pci_info_t *data); static uint8_t mpr_get_fw_diag_buffer_number(struct mpr_softc *sc, uint32_t unique_id); static int mpr_post_fw_diag_buffer(struct mpr_softc *sc, mpr_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code); static int mpr_release_fw_diag_buffer(struct mpr_softc *sc, mpr_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code, uint32_t diag_type); static int mpr_diag_register(struct mpr_softc *sc, mpr_fw_diag_register_t *diag_register, uint32_t *return_code); static int mpr_diag_unregister(struct mpr_softc *sc, mpr_fw_diag_unregister_t *diag_unregister, uint32_t *return_code); static int mpr_diag_query(struct mpr_softc *sc, mpr_fw_diag_query_t *diag_query, uint32_t *return_code); static int mpr_diag_read_buffer(struct mpr_softc *sc, mpr_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf, uint32_t *return_code); static int mpr_diag_release(struct mpr_softc *sc, mpr_fw_diag_release_t *diag_release, uint32_t *return_code); static int mpr_do_diag_action(struct mpr_softc *sc, uint32_t action, uint8_t *diag_action, uint32_t length, uint32_t *return_code); static int mpr_user_diag_action(struct mpr_softc *sc, mpr_diag_action_t *data); static void mpr_user_event_query(struct mpr_softc *sc, mpr_event_query_t *data); static void mpr_user_event_enable(struct mpr_softc *sc, mpr_event_enable_t *data); static int mpr_user_event_report(struct mpr_softc *sc, mpr_event_report_t *data); static int mpr_user_reg_access(struct mpr_softc *sc, mpr_reg_access_t *data); static int mpr_user_btdh(struct mpr_softc *sc, mpr_btdh_mapping_t *data); static MALLOC_DEFINE(M_MPRUSER, "mpr_user", "Buffers for mpr(4) ioctls"); /* * MPI functions that support IEEE SGLs for SAS3. */ static uint8_t ieee_sgl_func_list[] = { MPI2_FUNCTION_SCSI_IO_REQUEST, MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH, MPI2_FUNCTION_SMP_PASSTHROUGH, MPI2_FUNCTION_SATA_PASSTHROUGH, MPI2_FUNCTION_FW_UPLOAD, MPI2_FUNCTION_FW_DOWNLOAD, MPI2_FUNCTION_TARGET_ASSIST, MPI2_FUNCTION_TARGET_STATUS_SEND, MPI2_FUNCTION_TOOLBOX }; int mpr_attach_user(struct mpr_softc *sc) { int unit; unit = device_get_unit(sc->mpr_dev); sc->mpr_cdev = make_dev(&mpr_cdevsw, unit, UID_ROOT, GID_OPERATOR, 0640, "mpr%d", unit); if (sc->mpr_cdev == NULL) return (ENOMEM); sc->mpr_cdev->si_drv1 = sc; return (0); } void mpr_detach_user(struct mpr_softc *sc) { /* XXX: do a purge of pending requests? */ if (sc->mpr_cdev != NULL) destroy_dev(sc->mpr_cdev); } static int mpr_open(struct cdev *dev, int flags, int fmt, struct thread *td) { return (0); } static int mpr_close(struct cdev *dev, int flags, int fmt, struct thread *td) { return (0); } static int mpr_user_read_cfg_header(struct mpr_softc *sc, struct mpr_cfg_page_req *page_req) { MPI2_CONFIG_PAGE_HEADER *hdr; struct mpr_config_params params; int error; hdr = ¶ms.hdr.Struct; params.action = MPI2_CONFIG_ACTION_PAGE_HEADER; params.page_address = le32toh(page_req->page_address); hdr->PageVersion = 0; hdr->PageLength = 0; hdr->PageNumber = page_req->header.PageNumber; hdr->PageType = page_req->header.PageType; params.buffer = NULL; params.length = 0; params.callback = NULL; if ((error = mpr_read_config_page(sc, ¶ms)) != 0) { /* * Leave the request. Without resetting the chip, it's * still owned by it and we'll just get into trouble * freeing it now. Mark it as abandoned so that if it * shows up later it can be freed. */ mpr_printf(sc, "read_cfg_header timed out\n"); return (ETIMEDOUT); } page_req->ioc_status = htole16(params.status); if ((page_req->ioc_status & MPI2_IOCSTATUS_MASK) == MPI2_IOCSTATUS_SUCCESS) { bcopy(hdr, &page_req->header, sizeof(page_req->header)); } return (0); } static int mpr_user_read_cfg_page(struct mpr_softc *sc, struct mpr_cfg_page_req *page_req, void *buf) { MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr; struct mpr_config_params params; int error; reqhdr = buf; hdr = ¶ms.hdr.Struct; hdr->PageVersion = reqhdr->PageVersion; hdr->PageLength = reqhdr->PageLength; hdr->PageNumber = reqhdr->PageNumber; hdr->PageType = reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK; params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; params.page_address = le32toh(page_req->page_address); params.buffer = buf; params.length = le32toh(page_req->len); params.callback = NULL; if ((error = mpr_read_config_page(sc, ¶ms)) != 0) { mpr_printf(sc, "mpr_user_read_cfg_page timed out\n"); return (ETIMEDOUT); } page_req->ioc_status = htole16(params.status); return (0); } static int mpr_user_read_extcfg_header(struct mpr_softc *sc, struct mpr_ext_cfg_page_req *ext_page_req) { MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr; struct mpr_config_params params; int error; hdr = ¶ms.hdr.Ext; params.action = MPI2_CONFIG_ACTION_PAGE_HEADER; hdr->PageVersion = ext_page_req->header.PageVersion; hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; hdr->ExtPageLength = 0; hdr->PageNumber = ext_page_req->header.PageNumber; hdr->ExtPageType = ext_page_req->header.ExtPageType; params.page_address = le32toh(ext_page_req->page_address); params.buffer = NULL; params.length = 0; params.callback = NULL; if ((error = mpr_read_config_page(sc, ¶ms)) != 0) { /* * Leave the request. Without resetting the chip, it's * still owned by it and we'll just get into trouble * freeing it now. Mark it as abandoned so that if it * shows up later it can be freed. */ mpr_printf(sc, "mpr_user_read_extcfg_header timed out\n"); return (ETIMEDOUT); } ext_page_req->ioc_status = htole16(params.status); if ((ext_page_req->ioc_status & MPI2_IOCSTATUS_MASK) == MPI2_IOCSTATUS_SUCCESS) { ext_page_req->header.PageVersion = hdr->PageVersion; ext_page_req->header.PageNumber = hdr->PageNumber; ext_page_req->header.PageType = hdr->PageType; ext_page_req->header.ExtPageLength = hdr->ExtPageLength; ext_page_req->header.ExtPageType = hdr->ExtPageType; } return (0); } static int mpr_user_read_extcfg_page(struct mpr_softc *sc, struct mpr_ext_cfg_page_req *ext_page_req, void *buf) { MPI2_CONFIG_EXTENDED_PAGE_HEADER *reqhdr, *hdr; struct mpr_config_params params; int error; reqhdr = buf; hdr = ¶ms.hdr.Ext; params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; params.page_address = le32toh(ext_page_req->page_address); hdr->PageVersion = reqhdr->PageVersion; hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; hdr->PageNumber = reqhdr->PageNumber; hdr->ExtPageType = reqhdr->ExtPageType; hdr->ExtPageLength = reqhdr->ExtPageLength; params.buffer = buf; params.length = le32toh(ext_page_req->len); params.callback = NULL; if ((error = mpr_read_config_page(sc, ¶ms)) != 0) { mpr_printf(sc, "mpr_user_read_extcfg_page timed out\n"); return (ETIMEDOUT); } ext_page_req->ioc_status = htole16(params.status); return (0); } static int mpr_user_write_cfg_page(struct mpr_softc *sc, struct mpr_cfg_page_req *page_req, void *buf) { MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr; struct mpr_config_params params; u_int hdr_attr; int error; reqhdr = buf; hdr = ¶ms.hdr.Struct; hdr_attr = reqhdr->PageType & MPI2_CONFIG_PAGEATTR_MASK; if (hdr_attr != MPI2_CONFIG_PAGEATTR_CHANGEABLE && hdr_attr != MPI2_CONFIG_PAGEATTR_PERSISTENT) { mpr_printf(sc, "page type 0x%x not changeable\n", reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK); return (EINVAL); } /* * There isn't any point in restoring stripped out attributes * if you then mask them going down to issue the request. */ hdr->PageVersion = reqhdr->PageVersion; hdr->PageLength = reqhdr->PageLength; hdr->PageNumber = reqhdr->PageNumber; hdr->PageType = reqhdr->PageType; params.action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; params.page_address = le32toh(page_req->page_address); params.buffer = buf; params.length = le32toh(page_req->len); params.callback = NULL; if ((error = mpr_write_config_page(sc, ¶ms)) != 0) { mpr_printf(sc, "mpr_write_cfg_page timed out\n"); return (ETIMEDOUT); } page_req->ioc_status = htole16(params.status); return (0); } void mpr_init_sge(struct mpr_command *cm, void *req, void *sge) { int off, space; space = (int)cm->cm_sc->reqframesz; off = (uintptr_t)sge - (uintptr_t)req; KASSERT(off < space, ("bad pointers %p %p, off %d, space %d", req, sge, off, space)); cm->cm_sge = sge; cm->cm_sglsize = space - off; } /* * Prepare the mpr_command for an IOC_FACTS request. */ static int mpi_pre_ioc_facts(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI2_IOC_FACTS_REQUEST *req = (void *)cm->cm_req; MPI2_IOC_FACTS_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); cm->cm_sge = NULL; cm->cm_sglsize = 0; return (0); } /* * Prepare the mpr_command for a PORT_FACTS request. */ static int mpi_pre_port_facts(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI2_PORT_FACTS_REQUEST *req = (void *)cm->cm_req; MPI2_PORT_FACTS_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); cm->cm_sge = NULL; cm->cm_sglsize = 0; return (0); } /* * Prepare the mpr_command for a FW_DOWNLOAD request. */ static int mpi_pre_fw_download(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI25_FW_DOWNLOAD_REQUEST *req = (void *)cm->cm_req; MPI2_FW_DOWNLOAD_REPLY *rpl; int error; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); if (cmd->len == 0) return (EINVAL); error = copyin(cmd->buf, cm->cm_data, cmd->len); if (error != 0) return (error); mpr_init_sge(cm, req, &req->SGL); /* * For now, the F/W image must be provided in a single request. */ if ((req->MsgFlags & MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT) == 0) return (EINVAL); if (req->TotalImageSize != cmd->len) return (EINVAL); req->ImageOffset = 0; req->ImageSize = cmd->len; cm->cm_flags |= MPR_CM_FLAGS_DATAOUT; return (mpr_push_ieee_sge(cm, &req->SGL, 0)); } /* * Prepare the mpr_command for a FW_UPLOAD request. */ static int mpi_pre_fw_upload(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI25_FW_UPLOAD_REQUEST *req = (void *)cm->cm_req; MPI2_FW_UPLOAD_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpr_init_sge(cm, req, &req->SGL); if (cmd->len == 0) { /* Perhaps just asking what the size of the fw is? */ return (0); } req->ImageOffset = 0; req->ImageSize = cmd->len; cm->cm_flags |= MPR_CM_FLAGS_DATAIN; return (mpr_push_ieee_sge(cm, &req->SGL, 0)); } /* * Prepare the mpr_command for a SATA_PASSTHROUGH request. */ static int mpi_pre_sata_passthrough(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI2_SATA_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req; MPI2_SATA_PASSTHROUGH_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpr_init_sge(cm, req, &req->SGL); return (0); } /* * Prepare the mpr_command for a SMP_PASSTHROUGH request. */ static int mpi_pre_smp_passthrough(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI2_SMP_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req; MPI2_SMP_PASSTHROUGH_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpr_init_sge(cm, req, &req->SGL); return (0); } /* * Prepare the mpr_command for a CONFIG request. */ static int mpi_pre_config(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI2_CONFIG_REQUEST *req = (void *)cm->cm_req; MPI2_CONFIG_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpr_init_sge(cm, req, &req->PageBufferSGE); return (0); } /* * Prepare the mpr_command for a SAS_IO_UNIT_CONTROL request. */ static int mpi_pre_sas_io_unit_control(struct mpr_command *cm, struct mpr_usr_command *cmd) { cm->cm_sge = NULL; cm->cm_sglsize = 0; return (0); } /* * A set of functions to prepare an mpr_command for the various * supported requests. */ struct mpr_user_func { U8 Function; mpr_user_f *f_pre; } mpr_user_func_list[] = { { MPI2_FUNCTION_IOC_FACTS, mpi_pre_ioc_facts }, { MPI2_FUNCTION_PORT_FACTS, mpi_pre_port_facts }, { MPI2_FUNCTION_FW_DOWNLOAD, mpi_pre_fw_download }, { MPI2_FUNCTION_FW_UPLOAD, mpi_pre_fw_upload }, { MPI2_FUNCTION_SATA_PASSTHROUGH, mpi_pre_sata_passthrough }, { MPI2_FUNCTION_SMP_PASSTHROUGH, mpi_pre_smp_passthrough}, { MPI2_FUNCTION_CONFIG, mpi_pre_config}, { MPI2_FUNCTION_SAS_IO_UNIT_CONTROL, mpi_pre_sas_io_unit_control }, { 0xFF, NULL } /* list end */ }; static int mpr_user_setup_request(struct mpr_command *cm, struct mpr_usr_command *cmd) { MPI2_REQUEST_HEADER *hdr = (MPI2_REQUEST_HEADER *)cm->cm_req; struct mpr_user_func *f; for (f = mpr_user_func_list; f->f_pre != NULL; f++) { if (hdr->Function == f->Function) return (f->f_pre(cm, cmd)); } return (EINVAL); } static int mpr_user_command(struct mpr_softc *sc, struct mpr_usr_command *cmd) { MPI2_REQUEST_HEADER *hdr; MPI2_DEFAULT_REPLY *rpl = NULL; void *buf = NULL; struct mpr_command *cm = NULL; int err = 0; int sz; mpr_lock(sc); cm = mpr_alloc_command(sc); if (cm == NULL) { mpr_printf(sc, "%s: no mpr requests\n", __func__); err = ENOMEM; goto RetFree; } mpr_unlock(sc); hdr = (MPI2_REQUEST_HEADER *)cm->cm_req; mpr_dprint(sc, MPR_USER, "%s: req %p %d rpl %p %d\n", __func__, cmd->req, cmd->req_len, cmd->rpl, cmd->rpl_len); if (cmd->req_len > (int)sc->reqframesz) { err = EINVAL; goto RetFreeUnlocked; } err = copyin(cmd->req, hdr, cmd->req_len); if (err != 0) goto RetFreeUnlocked; mpr_dprint(sc, MPR_USER, "%s: Function %02X MsgFlags %02X\n", __func__, hdr->Function, hdr->MsgFlags); if (cmd->len > 0) { buf = malloc(cmd->len, M_MPRUSER, M_WAITOK|M_ZERO); cm->cm_data = buf; cm->cm_length = cmd->len; } else { cm->cm_data = NULL; cm->cm_length = 0; } cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; err = mpr_user_setup_request(cm, cmd); if (err == EINVAL) { mpr_printf(sc, "%s: unsupported parameter or unsupported " "function in request (function = 0x%X)\n", __func__, hdr->Function); } if (err != 0) goto RetFreeUnlocked; mpr_lock(sc); err = mpr_wait_command(sc, &cm, 30, CAN_SLEEP); if (err || (cm == NULL)) { mpr_printf(sc, "%s: invalid request: error %d\n", __func__, err); goto RetFree; } if (cm != NULL) rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply; if (rpl != NULL) sz = rpl->MsgLength * 4; else sz = 0; if (sz > cmd->rpl_len) { mpr_printf(sc, "%s: user reply buffer (%d) smaller than " "returned buffer (%d)\n", __func__, cmd->rpl_len, sz); sz = cmd->rpl_len; } mpr_unlock(sc); err = copyout(rpl, cmd->rpl, sz); if (buf != NULL && err == 0) err = copyout(buf, cmd->buf, cmd->len); mpr_dprint(sc, MPR_USER, "%s: reply size %d\n", __func__, sz); RetFreeUnlocked: mpr_lock(sc); RetFree: if (cm != NULL) mpr_free_command(sc, cm); mpr_unlock(sc); if (buf != NULL) free(buf, M_MPRUSER); return (err); } static int mpr_user_pass_thru(struct mpr_softc *sc, mpr_pass_thru_t *data) { MPI2_REQUEST_HEADER *hdr, *tmphdr; MPI2_DEFAULT_REPLY *rpl; Mpi26NVMeEncapsulatedErrorReply_t *nvme_error_reply = NULL; Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL; struct mpr_command *cm = NULL; void *req = NULL; int i, err = 0, dir = 0, sz; uint8_t tool, function = 0; u_int sense_len; struct mprsas_target *targ = NULL; /* * Only allow one passthru command at a time. Use the MPR_FLAGS_BUSY * bit to denote that a passthru is being processed. */ mpr_lock(sc); if (sc->mpr_flags & MPR_FLAGS_BUSY) { mpr_dprint(sc, MPR_USER, "%s: Only one passthru command " "allowed at a single time.", __func__); mpr_unlock(sc); return (EBUSY); } sc->mpr_flags |= MPR_FLAGS_BUSY; mpr_unlock(sc); /* * Do some validation on data direction. Valid cases are: * 1) DataSize is 0 and direction is NONE * 2) DataSize is non-zero and one of: * a) direction is READ or * b) direction is WRITE or * c) direction is BOTH and DataOutSize is non-zero * If valid and the direction is BOTH, change the direction to READ. * if valid and the direction is not BOTH, make sure DataOutSize is 0. */ if (((data->DataSize == 0) && (data->DataDirection == MPR_PASS_THRU_DIRECTION_NONE)) || ((data->DataSize != 0) && ((data->DataDirection == MPR_PASS_THRU_DIRECTION_READ) || (data->DataDirection == MPR_PASS_THRU_DIRECTION_WRITE) || ((data->DataDirection == MPR_PASS_THRU_DIRECTION_BOTH) && (data->DataOutSize != 0))))) { if (data->DataDirection == MPR_PASS_THRU_DIRECTION_BOTH) data->DataDirection = MPR_PASS_THRU_DIRECTION_READ; else data->DataOutSize = 0; } else { err = EINVAL; goto RetFreeUnlocked; } mpr_dprint(sc, MPR_USER, "%s: req 0x%jx %d rpl 0x%jx %d " "data in 0x%jx %d data out 0x%jx %d data dir %d\n", __func__, data->PtrRequest, data->RequestSize, data->PtrReply, data->ReplySize, data->PtrData, data->DataSize, data->PtrDataOut, data->DataOutSize, data->DataDirection); if (data->RequestSize > sc->reqframesz) { err = EINVAL; goto RetFreeUnlocked; } req = malloc(data->RequestSize, M_MPRUSER, M_WAITOK | M_ZERO); tmphdr = (MPI2_REQUEST_HEADER *)req; err = copyin(PTRIN(data->PtrRequest), req, data->RequestSize); if (err != 0) goto RetFreeUnlocked; function = tmphdr->Function; mpr_dprint(sc, MPR_USER, "%s: Function %02X MsgFlags %02X\n", __func__, function, tmphdr->MsgFlags); /* * Handle a passthru TM request. */ if (function == MPI2_FUNCTION_SCSI_TASK_MGMT) { MPI2_SCSI_TASK_MANAGE_REQUEST *task; mpr_lock(sc); cm = mprsas_alloc_tm(sc); if (cm == NULL) { err = EINVAL; goto Ret; } /* Copy the header in. Only a small fixup is needed. */ task = (MPI2_SCSI_TASK_MANAGE_REQUEST *)cm->cm_req; memcpy(task, req, data->RequestSize); task->TaskMID = cm->cm_desc.Default.SMID; cm->cm_data = NULL; cm->cm_complete = NULL; cm->cm_complete_data = NULL; targ = mprsas_find_target_by_handle(sc->sassc, 0, task->DevHandle); if (targ == NULL) { mpr_dprint(sc, MPR_INFO, "%s %d : invalid handle for requested TM 0x%x \n", __func__, __LINE__, task->DevHandle); err = 1; } else { mprsas_prepare_for_tm(sc, cm, targ, CAM_LUN_WILDCARD); err = mpr_wait_command(sc, &cm, 30, CAN_SLEEP); } if (err != 0) { err = EIO; mpr_dprint(sc, MPR_FAULT, "%s: task management failed", __func__); } /* * Copy the reply data and sense data to user space. */ if (err == 0 && cm != NULL && cm->cm_reply != NULL) { rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply; sz = rpl->MsgLength * 4; if (bootverbose && sz > data->ReplySize) { mpr_printf(sc, "%s: user reply buffer (%d) " "smaller than returned buffer (%d)\n", __func__, data->ReplySize, sz); } mpr_unlock(sc); err = copyout(cm->cm_reply, PTRIN(data->PtrReply), MIN(sz, data->ReplySize)); mpr_lock(sc); } mprsas_free_tm(sc, cm); goto Ret; } mpr_lock(sc); cm = mpr_alloc_command(sc); if (cm == NULL) { mpr_printf(sc, "%s: no mpr requests\n", __func__); err = ENOMEM; goto Ret; } mpr_unlock(sc); hdr = (MPI2_REQUEST_HEADER *)cm->cm_req; memcpy(hdr, req, data->RequestSize); /* * Do some checking to make sure the IOCTL request contains a valid * request. Then set the SGL info. */ mpr_init_sge(cm, hdr, (void *)((uint8_t *)hdr + data->RequestSize)); /* * Set up for read, write or both. From check above, DataOutSize will * be 0 if direction is READ or WRITE, but it will have some non-zero * value if the direction is BOTH. So, just use the biggest size to get * the cm_data buffer size. If direction is BOTH, 2 SGLs need to be set * up; the first is for the request and the second will contain the * response data. cm_out_len needs to be set here and this will be used * when the SGLs are set up. */ cm->cm_data = NULL; cm->cm_length = MAX(data->DataSize, data->DataOutSize); cm->cm_out_len = data->DataOutSize; cm->cm_flags = 0; if (cm->cm_length != 0) { cm->cm_data = malloc(cm->cm_length, M_MPRUSER, M_WAITOK | M_ZERO); cm->cm_flags = MPR_CM_FLAGS_DATAIN; if (data->DataOutSize) { cm->cm_flags |= MPR_CM_FLAGS_DATAOUT; err = copyin(PTRIN(data->PtrDataOut), cm->cm_data, data->DataOutSize); } else if (data->DataDirection == MPR_PASS_THRU_DIRECTION_WRITE) { cm->cm_flags = MPR_CM_FLAGS_DATAOUT; err = copyin(PTRIN(data->PtrData), cm->cm_data, data->DataSize); } if (err != 0) mpr_dprint(sc, MPR_FAULT, "%s: failed to copy IOCTL " "data from user space\n", __func__); } /* * Set this flag only if processing a command that does not need an * IEEE SGL. The CLI Tool within the Toolbox uses IEEE SGLs, so clear * the flag only for that tool if processing a Toolbox function. */ cm->cm_flags |= MPR_CM_FLAGS_SGE_SIMPLE; for (i = 0; i < sizeof (ieee_sgl_func_list); i++) { if (function == ieee_sgl_func_list[i]) { if (function == MPI2_FUNCTION_TOOLBOX) { tool = (uint8_t)hdr->FunctionDependent1; if (tool != MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL) break; } cm->cm_flags &= ~MPR_CM_FLAGS_SGE_SIMPLE; break; } } cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; if (function == MPI2_FUNCTION_NVME_ENCAPSULATED) { nvme_encap_request = (Mpi26NVMeEncapsulatedRequest_t *)cm->cm_req; cm->cm_desc.Default.RequestFlags = MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED; /* * Get the Physical Address of the sense buffer. * Save the user's Error Response buffer address and use that * field to hold the sense buffer address. * Clear the internal sense buffer, which will potentially hold * the Completion Queue Entry on return, or 0 if no Entry. * Build the PRPs and set direction bits. * Send the request. */ cm->nvme_error_response = (uint64_t *)(uintptr_t)(((uint64_t)nvme_encap_request-> ErrorResponseBaseAddress.High << 32) | (uint64_t)nvme_encap_request-> ErrorResponseBaseAddress.Low); nvme_encap_request->ErrorResponseBaseAddress.High = htole32((uint32_t)((uint64_t)cm->cm_sense_busaddr >> 32)); nvme_encap_request->ErrorResponseBaseAddress.Low = htole32(cm->cm_sense_busaddr); memset(cm->cm_sense, 0, NVME_ERROR_RESPONSE_SIZE); mpr_build_nvme_prp(sc, cm, nvme_encap_request, cm->cm_data, data->DataSize, data->DataOutSize); } /* * Set up Sense buffer and SGL offset for IO passthru. SCSI IO request * uses SCSI IO or Fast Path SCSI IO descriptor. */ if ((function == MPI2_FUNCTION_SCSI_IO_REQUEST) || (function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { MPI2_SCSI_IO_REQUEST *scsi_io_req; scsi_io_req = (MPI2_SCSI_IO_REQUEST *)hdr; /* * Put SGE for data and data_out buffer at the end of * scsi_io_request message header (64 bytes in total). * Following above SGEs, the residual space will be used by * sense data. */ scsi_io_req->SenseBufferLength = (uint8_t)(data->RequestSize - 64); scsi_io_req->SenseBufferLowAddress = htole32(cm->cm_sense_busaddr); /* * Set SGLOffset0 value. This is the number of dwords that SGL * is offset from the beginning of MPI2_SCSI_IO_REQUEST struct. */ scsi_io_req->SGLOffset0 = 24; /* * Setup descriptor info. RAID passthrough must use the * default request descriptor which is already set, so if this * is a SCSI IO request, change the descriptor to SCSI IO or * Fast Path SCSI IO. Also, if this is a SCSI IO request, * handle the reply in the mprsas_scsio_complete function. */ if (function == MPI2_FUNCTION_SCSI_IO_REQUEST) { targ = mprsas_find_target_by_handle(sc->sassc, 0, scsi_io_req->DevHandle); if (!targ) { printf("No Target found for handle %d\n", scsi_io_req->DevHandle); err = EINVAL; goto RetFreeUnlocked; } if (targ->scsi_req_desc_type == MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO) { cm->cm_desc.FastPathSCSIIO.RequestFlags = MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; if (!sc->atomic_desc_capable) { cm->cm_desc.FastPathSCSIIO.DevHandle = scsi_io_req->DevHandle; } scsi_io_req->IoFlags |= MPI25_SCSIIO_IOFLAGS_FAST_PATH; } else { cm->cm_desc.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; if (!sc->atomic_desc_capable) { cm->cm_desc.SCSIIO.DevHandle = scsi_io_req->DevHandle; } } /* * Make sure the DevHandle is not 0 because this is a * likely error. */ if (scsi_io_req->DevHandle == 0) { err = EINVAL; goto RetFreeUnlocked; } } } mpr_lock(sc); err = mpr_wait_command(sc, &cm, 30, CAN_SLEEP); if (err || (cm == NULL)) { mpr_printf(sc, "%s: invalid request: error %d\n", __func__, err); goto RetFree; } /* * Sync the DMA data, if any. Then copy the data to user space. */ if (cm->cm_data != NULL) { if (cm->cm_flags & MPR_CM_FLAGS_DATAIN) dir = BUS_DMASYNC_POSTREAD; else if (cm->cm_flags & MPR_CM_FLAGS_DATAOUT) dir = BUS_DMASYNC_POSTWRITE; bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir); bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap); if (cm->cm_flags & MPR_CM_FLAGS_DATAIN) { mpr_unlock(sc); err = copyout(cm->cm_data, PTRIN(data->PtrData), data->DataSize); mpr_lock(sc); if (err != 0) mpr_dprint(sc, MPR_FAULT, "%s: failed to copy " "IOCTL data to user space\n", __func__); } } /* * Copy the reply data and sense data to user space. */ if (err == 0 && cm->cm_reply != NULL) { rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply; sz = rpl->MsgLength * 4; if (bootverbose && sz > data->ReplySize) { mpr_printf(sc, "%s: user reply buffer (%d) smaller " "than returned buffer (%d)\n", __func__, data->ReplySize, sz); } mpr_unlock(sc); err = copyout(cm->cm_reply, PTRIN(data->PtrReply), MIN(sz, data->ReplySize)); if (err != 0) mpr_dprint(sc, MPR_FAULT, "%s: failed to copy " "IOCTL data to user space\n", __func__); mpr_lock(sc); if (err == 0 && (function == MPI2_FUNCTION_SCSI_IO_REQUEST || function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { if (((MPI2_SCSI_IO_REPLY *)rpl)->SCSIState & MPI2_SCSI_STATE_AUTOSENSE_VALID) { sense_len = MIN((le32toh(((MPI2_SCSI_IO_REPLY *)rpl)-> SenseCount)), sizeof(struct scsi_sense_data)); mpr_unlock(sc); err = copyout(cm->cm_sense, PTRIN(data->PtrReply + sizeof(MPI2_SCSI_IO_REPLY)), sense_len); if (err != 0) mpr_dprint(sc, MPR_FAULT, "%s: failed to copy IOCTL data to " "user space\n", __func__); mpr_lock(sc); } } /* * Copy out the NVMe Error Reponse to user. The Error Response * buffer is given by the user, but a sense buffer is used to * get that data from the IOC. The user's * ErrorResponseBaseAddress is saved in the * 'nvme_error_response' field before the command because that * field is set to a sense buffer. When the command is * complete, the Error Response data from the IOC is copied to * that user address after it is checked for validity. * Also note that 'sense' buffers are not defined for * NVMe commands. Sense terminalogy is only used here so that * the same IOCTL structure and sense buffers can be used for * NVMe. */ if (err == 0 && function == MPI2_FUNCTION_NVME_ENCAPSULATED) { if (cm->nvme_error_response == NULL) { mpr_dprint(sc, MPR_INFO, "NVMe Error Response " "buffer is NULL. Response data will not be " "returned.\n"); mpr_unlock(sc); goto RetFreeUnlocked; } nvme_error_reply = (Mpi26NVMeEncapsulatedErrorReply_t *)cm->cm_reply; sz = MIN(le32toh(nvme_error_reply->ErrorResponseCount), NVME_ERROR_RESPONSE_SIZE); mpr_unlock(sc); err = copyout(cm->cm_sense, (PTRIN(data->PtrReply + sizeof(MPI2_SCSI_IO_REPLY))), sz); if (err != 0) mpr_dprint(sc, MPR_FAULT, "%s: failed to copy IOCTL data to " "user space\n", __func__); mpr_lock(sc); } } mpr_unlock(sc); RetFreeUnlocked: mpr_lock(sc); RetFree: if (cm != NULL) { if (cm->cm_data) free(cm->cm_data, M_MPRUSER); mpr_free_command(sc, cm); } Ret: sc->mpr_flags &= ~MPR_FLAGS_BUSY; mpr_unlock(sc); free(req, M_MPRUSER); return (err); } static void mpr_user_get_adapter_data(struct mpr_softc *sc, mpr_adapter_data_t *data) { Mpi2ConfigReply_t mpi_reply; Mpi2BiosPage3_t config_page; /* * Use the PCI interface functions to get the Bus, Device, and Function * information. */ data->PciInformation.u.bits.BusNumber = pci_get_bus(sc->mpr_dev); data->PciInformation.u.bits.DeviceNumber = pci_get_slot(sc->mpr_dev); data->PciInformation.u.bits.FunctionNumber = pci_get_function(sc->mpr_dev); /* * Get the FW version that should already be saved in IOC Facts. */ data->MpiFirmwareVersion = sc->facts->FWVersion.Word; /* * General device info. */ if (sc->mpr_flags & MPR_FLAGS_GEN35_IOC) data->AdapterType = MPRIOCTL_ADAPTER_TYPE_SAS35; else data->AdapterType = MPRIOCTL_ADAPTER_TYPE_SAS3; data->PCIDeviceHwId = pci_get_device(sc->mpr_dev); data->PCIDeviceHwRev = pci_read_config(sc->mpr_dev, PCIR_REVID, 1); data->SubSystemId = pci_get_subdevice(sc->mpr_dev); data->SubsystemVendorId = pci_get_subvendor(sc->mpr_dev); /* * Get the driver version. */ strcpy((char *)&data->DriverVersion[0], MPR_DRIVER_VERSION); /* * Need to get BIOS Config Page 3 for the BIOS Version. */ data->BiosVersion = 0; mpr_lock(sc); if (mpr_config_get_bios_pg3(sc, &mpi_reply, &config_page)) printf("%s: Error while retrieving BIOS Version\n", __func__); else data->BiosVersion = config_page.BiosVersion; mpr_unlock(sc); } static void mpr_user_read_pci_info(struct mpr_softc *sc, mpr_pci_info_t *data) { int i; /* * Use the PCI interface functions to get the Bus, Device, and Function * information. */ data->BusNumber = pci_get_bus(sc->mpr_dev); data->DeviceNumber = pci_get_slot(sc->mpr_dev); data->FunctionNumber = pci_get_function(sc->mpr_dev); /* * Now get the interrupt vector and the pci header. The vector can * only be 0 right now. The header is the first 256 bytes of config * space. */ data->InterruptVector = 0; for (i = 0; i < sizeof (data->PciHeader); i++) { data->PciHeader[i] = pci_read_config(sc->mpr_dev, i, 1); } } static uint8_t mpr_get_fw_diag_buffer_number(struct mpr_softc *sc, uint32_t unique_id) { uint8_t index; for (index = 0; index < MPI2_DIAG_BUF_TYPE_COUNT; index++) { if (sc->fw_diag_buffer_list[index].unique_id == unique_id) { return (index); } } return (MPR_FW_DIAGNOSTIC_UID_NOT_FOUND); } static int mpr_post_fw_diag_buffer(struct mpr_softc *sc, mpr_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code) { MPI2_DIAG_BUFFER_POST_REQUEST *req; MPI2_DIAG_BUFFER_POST_REPLY *reply; struct mpr_command *cm = NULL; int i, status; /* * If buffer is not enabled, just leave. */ *return_code = MPR_FW_DIAG_ERROR_POST_FAILED; if (!pBuffer->enabled) { return (MPR_DIAG_FAILURE); } /* * Clear some flags initially. */ pBuffer->force_release = FALSE; pBuffer->valid_data = FALSE; pBuffer->owned_by_firmware = FALSE; /* * Get a command. */ cm = mpr_alloc_command(sc); if (cm == NULL) { mpr_printf(sc, "%s: no mpr requests\n", __func__); return (MPR_DIAG_FAILURE); } /* * Build the request for releasing the FW Diag Buffer and send it. */ req = (MPI2_DIAG_BUFFER_POST_REQUEST *)cm->cm_req; req->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; req->BufferType = pBuffer->buffer_type; req->ExtendedType = pBuffer->extended_type; req->BufferLength = pBuffer->size; for (i = 0; i < (sizeof(req->ProductSpecific) / 4); i++) req->ProductSpecific[i] = pBuffer->product_specific[i]; mpr_from_u64(sc->fw_diag_busaddr, &req->BufferAddress); cm->cm_data = NULL; cm->cm_length = 0; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_complete_data = NULL; /* * Send command synchronously. */ status = mpr_wait_command(sc, &cm, 30, CAN_SLEEP); if (status || (cm == NULL)) { mpr_printf(sc, "%s: invalid request: error %d\n", __func__, status); status = MPR_DIAG_FAILURE; goto done; } /* * Process POST reply. */ reply = (MPI2_DIAG_BUFFER_POST_REPLY *)cm->cm_reply; if (reply == NULL) { mpr_printf(sc, "%s: reply is NULL, probably due to " "reinitialization\n", __func__); status = MPR_DIAG_FAILURE; goto done; } if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) { status = MPR_DIAG_FAILURE; mpr_dprint(sc, MPR_FAULT, "%s: post of FW Diag Buffer failed " "with IOCStatus = 0x%x, IOCLogInfo = 0x%x and " "TransferLength = 0x%x\n", __func__, le16toh(reply->IOCStatus), le32toh(reply->IOCLogInfo), le32toh(reply->TransferLength)); goto done; } /* * Post was successful. */ pBuffer->valid_data = TRUE; pBuffer->owned_by_firmware = TRUE; *return_code = MPR_FW_DIAG_ERROR_SUCCESS; status = MPR_DIAG_SUCCESS; done: if (cm != NULL) mpr_free_command(sc, cm); return (status); } static int mpr_release_fw_diag_buffer(struct mpr_softc *sc, mpr_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code, uint32_t diag_type) { MPI2_DIAG_RELEASE_REQUEST *req; MPI2_DIAG_RELEASE_REPLY *reply; struct mpr_command *cm = NULL; int status; /* * If buffer is not enabled, just leave. */ *return_code = MPR_FW_DIAG_ERROR_RELEASE_FAILED; if (!pBuffer->enabled) { mpr_dprint(sc, MPR_USER, "%s: This buffer type is not " "supported by the IOC", __func__); return (MPR_DIAG_FAILURE); } /* * Clear some flags initially. */ pBuffer->force_release = FALSE; pBuffer->valid_data = FALSE; pBuffer->owned_by_firmware = FALSE; /* * Get a command. */ cm = mpr_alloc_command(sc); if (cm == NULL) { mpr_printf(sc, "%s: no mpr requests\n", __func__); return (MPR_DIAG_FAILURE); } /* * Build the request for releasing the FW Diag Buffer and send it. */ req = (MPI2_DIAG_RELEASE_REQUEST *)cm->cm_req; req->Function = MPI2_FUNCTION_DIAG_RELEASE; req->BufferType = pBuffer->buffer_type; cm->cm_data = NULL; cm->cm_length = 0; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_complete_data = NULL; /* * Send command synchronously. */ status = mpr_wait_command(sc, &cm, 30, CAN_SLEEP); if (status || (cm == NULL)) { mpr_printf(sc, "%s: invalid request: error %d\n", __func__, status); status = MPR_DIAG_FAILURE; goto done; } /* * Process RELEASE reply. */ reply = (MPI2_DIAG_RELEASE_REPLY *)cm->cm_reply; if (reply == NULL) { mpr_printf(sc, "%s: reply is NULL, probably due to " "reinitialization\n", __func__); status = MPR_DIAG_FAILURE; goto done; } if (((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) || pBuffer->owned_by_firmware) { status = MPR_DIAG_FAILURE; mpr_dprint(sc, MPR_FAULT, "%s: release of FW Diag Buffer " "failed with IOCStatus = 0x%x and IOCLogInfo = 0x%x\n", __func__, le16toh(reply->IOCStatus), le32toh(reply->IOCLogInfo)); goto done; } /* * Release was successful. */ *return_code = MPR_FW_DIAG_ERROR_SUCCESS; status = MPR_DIAG_SUCCESS; /* * If this was for an UNREGISTER diag type command, clear the unique ID. */ if (diag_type == MPR_FW_DIAG_TYPE_UNREGISTER) { pBuffer->unique_id = MPR_FW_DIAG_INVALID_UID; } done: if (cm != NULL) mpr_free_command(sc, cm); return (status); } static int mpr_diag_register(struct mpr_softc *sc, mpr_fw_diag_register_t *diag_register, uint32_t *return_code) { bus_dma_template_t t; mpr_fw_diagnostic_buffer_t *pBuffer; struct mpr_busdma_context *ctx; uint8_t extended_type, buffer_type, i; uint32_t buffer_size; uint32_t unique_id; int status; int error; extended_type = diag_register->ExtendedType; buffer_type = diag_register->BufferType; buffer_size = diag_register->RequestedBufferSize; unique_id = diag_register->UniqueId; ctx = NULL; error = 0; /* * Check for valid buffer type */ if (buffer_type >= MPI2_DIAG_BUF_TYPE_COUNT) { *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; return (MPR_DIAG_FAILURE); } /* * Get the current buffer and look up the unique ID. The unique ID * should not be found. If it is, the ID is already in use. */ i = mpr_get_fw_diag_buffer_number(sc, unique_id); pBuffer = &sc->fw_diag_buffer_list[buffer_type]; if (i != MPR_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPR_FW_DIAG_ERROR_INVALID_UID; return (MPR_DIAG_FAILURE); } /* * The buffer's unique ID should not be registered yet, and the given * unique ID cannot be 0. */ if ((pBuffer->unique_id != MPR_FW_DIAG_INVALID_UID) || (unique_id == MPR_FW_DIAG_INVALID_UID)) { *return_code = MPR_FW_DIAG_ERROR_INVALID_UID; return (MPR_DIAG_FAILURE); } /* * If this buffer is already posted as immediate, just change owner. */ if (pBuffer->immediate && pBuffer->owned_by_firmware && (pBuffer->unique_id == MPR_FW_DIAG_INVALID_UID)) { pBuffer->immediate = FALSE; pBuffer->unique_id = unique_id; return (MPR_DIAG_SUCCESS); } /* * Post a new buffer after checking if it's enabled. The DMA buffer * that is allocated will be contiguous (nsegments = 1). */ if (!pBuffer->enabled) { *return_code = MPR_FW_DIAG_ERROR_NO_BUFFER; return (MPR_DIAG_FAILURE); } bus_dma_template_init(&t, sc->mpr_parent_dmat); BUS_DMA_TEMPLATE_FILL(&t, BD_LOWADDR(BUS_SPACE_MAXADDR_32BIT), BD_MAXSIZE(buffer_size), BD_MAXSEGSIZE(buffer_size), BD_NSEGMENTS(1)); if (bus_dma_template_tag(&t, &sc->fw_diag_dmat)) { mpr_dprint(sc, MPR_ERROR, "Cannot allocate FW diag buffer DMA tag\n"); *return_code = MPR_FW_DIAG_ERROR_NO_BUFFER; status = MPR_DIAG_FAILURE; goto bailout; } if (bus_dmamem_alloc(sc->fw_diag_dmat, (void **)&sc->fw_diag_buffer, BUS_DMA_NOWAIT, &sc->fw_diag_map)) { mpr_dprint(sc, MPR_ERROR, "Cannot allocate FW diag buffer memory\n"); *return_code = MPR_FW_DIAG_ERROR_NO_BUFFER; status = MPR_DIAG_FAILURE; goto bailout; } bzero(sc->fw_diag_buffer, buffer_size); ctx = malloc(sizeof(*ctx), M_MPR, M_WAITOK | M_ZERO); ctx->addr = &sc->fw_diag_busaddr; ctx->buffer_dmat = sc->fw_diag_dmat; ctx->buffer_dmamap = sc->fw_diag_map; ctx->softc = sc; error = bus_dmamap_load(sc->fw_diag_dmat, sc->fw_diag_map, sc->fw_diag_buffer, buffer_size, mpr_memaddr_wait_cb, ctx, 0); if (error == EINPROGRESS) { /* XXX KDM */ device_printf(sc->mpr_dev, "%s: Deferred bus_dmamap_load\n", __func__); /* * Wait for the load to complete. If we're interrupted, * bail out. */ mpr_lock(sc); if (ctx->completed == 0) { error = msleep(ctx, &sc->mpr_mtx, PCATCH, "mprwait", 0); if (error != 0) { /* * We got an error from msleep(9). This is * most likely due to a signal. Tell * mpr_memaddr_wait_cb() that we've abandoned * the context, so it needs to clean up when * it is called. */ ctx->abandoned = 1; /* The callback will free this memory */ ctx = NULL; mpr_unlock(sc); device_printf(sc->mpr_dev, "Cannot " "bus_dmamap_load FW diag buffer, error = " "%d returned from msleep\n", error); *return_code = MPR_FW_DIAG_ERROR_NO_BUFFER; status = MPR_DIAG_FAILURE; goto bailout; } } mpr_unlock(sc); } if ((error != 0) || (ctx->error != 0)) { device_printf(sc->mpr_dev, "Cannot bus_dmamap_load FW diag " "buffer, %serror = %d\n", error ? "" : "callback ", error ? error : ctx->error); *return_code = MPR_FW_DIAG_ERROR_NO_BUFFER; status = MPR_DIAG_FAILURE; goto bailout; } bus_dmamap_sync(sc->fw_diag_dmat, sc->fw_diag_map, BUS_DMASYNC_PREREAD); pBuffer->size = buffer_size; /* * Copy the given info to the diag buffer and post the buffer. */ pBuffer->buffer_type = buffer_type; pBuffer->immediate = FALSE; if (buffer_type == MPI2_DIAG_BUF_TYPE_TRACE) { for (i = 0; i < (sizeof (pBuffer->product_specific) / 4); i++) { pBuffer->product_specific[i] = diag_register->ProductSpecific[i]; } } pBuffer->extended_type = extended_type; pBuffer->unique_id = unique_id; status = mpr_post_fw_diag_buffer(sc, pBuffer, return_code); bailout: /* * In case there was a failure, free the DMA buffer. */ if (status == MPR_DIAG_FAILURE) { if (sc->fw_diag_busaddr != 0) { bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map); sc->fw_diag_busaddr = 0; } if (sc->fw_diag_buffer != NULL) { bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer, sc->fw_diag_map); sc->fw_diag_buffer = NULL; } if (sc->fw_diag_dmat != NULL) { bus_dma_tag_destroy(sc->fw_diag_dmat); sc->fw_diag_dmat = NULL; } } if (ctx != NULL) free(ctx, M_MPR); return (status); } static int mpr_diag_unregister(struct mpr_softc *sc, mpr_fw_diag_unregister_t *diag_unregister, uint32_t *return_code) { mpr_fw_diagnostic_buffer_t *pBuffer; uint8_t i; uint32_t unique_id; int status; unique_id = diag_unregister->UniqueId; /* * Get the current buffer and look up the unique ID. The unique ID * should be there. */ i = mpr_get_fw_diag_buffer_number(sc, unique_id); if (i == MPR_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPR_FW_DIAG_ERROR_INVALID_UID; return (MPR_DIAG_FAILURE); } pBuffer = &sc->fw_diag_buffer_list[i]; /* * Try to release the buffer from FW before freeing it. If release * fails, don't free the DMA buffer in case FW tries to access it * later. If buffer is not owned by firmware, can't release it. */ if (!pBuffer->owned_by_firmware) { status = MPR_DIAG_SUCCESS; } else { status = mpr_release_fw_diag_buffer(sc, pBuffer, return_code, MPR_FW_DIAG_TYPE_UNREGISTER); } /* * At this point, return the current status no matter what happens with * the DMA buffer. */ pBuffer->unique_id = MPR_FW_DIAG_INVALID_UID; if (status == MPR_DIAG_SUCCESS) { if (sc->fw_diag_busaddr != 0) { bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map); sc->fw_diag_busaddr = 0; } if (sc->fw_diag_buffer != NULL) { bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer, sc->fw_diag_map); sc->fw_diag_buffer = NULL; } if (sc->fw_diag_dmat != NULL) { bus_dma_tag_destroy(sc->fw_diag_dmat); sc->fw_diag_dmat = NULL; } } return (status); } static int mpr_diag_query(struct mpr_softc *sc, mpr_fw_diag_query_t *diag_query, uint32_t *return_code) { mpr_fw_diagnostic_buffer_t *pBuffer; uint8_t i; uint32_t unique_id; unique_id = diag_query->UniqueId; /* * If ID is valid, query on ID. * If ID is invalid, query on buffer type. */ if (unique_id == MPR_FW_DIAG_INVALID_UID) { i = diag_query->BufferType; if (i >= MPI2_DIAG_BUF_TYPE_COUNT) { *return_code = MPR_FW_DIAG_ERROR_INVALID_UID; return (MPR_DIAG_FAILURE); } } else { i = mpr_get_fw_diag_buffer_number(sc, unique_id); if (i == MPR_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPR_FW_DIAG_ERROR_INVALID_UID; return (MPR_DIAG_FAILURE); } } /* * Fill query structure with the diag buffer info. */ pBuffer = &sc->fw_diag_buffer_list[i]; diag_query->BufferType = pBuffer->buffer_type; diag_query->ExtendedType = pBuffer->extended_type; if (diag_query->BufferType == MPI2_DIAG_BUF_TYPE_TRACE) { for (i = 0; i < (sizeof(diag_query->ProductSpecific) / 4); i++) { diag_query->ProductSpecific[i] = pBuffer->product_specific[i]; } } diag_query->TotalBufferSize = pBuffer->size; diag_query->DriverAddedBufferSize = 0; diag_query->UniqueId = pBuffer->unique_id; diag_query->ApplicationFlags = 0; diag_query->DiagnosticFlags = 0; /* * Set/Clear application flags */ if (pBuffer->immediate) { diag_query->ApplicationFlags &= ~MPR_FW_DIAG_FLAG_APP_OWNED; } else { diag_query->ApplicationFlags |= MPR_FW_DIAG_FLAG_APP_OWNED; } if (pBuffer->valid_data || pBuffer->owned_by_firmware) { diag_query->ApplicationFlags |= MPR_FW_DIAG_FLAG_BUFFER_VALID; } else { diag_query->ApplicationFlags &= ~MPR_FW_DIAG_FLAG_BUFFER_VALID; } if (pBuffer->owned_by_firmware) { diag_query->ApplicationFlags |= MPR_FW_DIAG_FLAG_FW_BUFFER_ACCESS; } else { diag_query->ApplicationFlags &= ~MPR_FW_DIAG_FLAG_FW_BUFFER_ACCESS; } return (MPR_DIAG_SUCCESS); } static int mpr_diag_read_buffer(struct mpr_softc *sc, mpr_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf, uint32_t *return_code) { mpr_fw_diagnostic_buffer_t *pBuffer; uint8_t i, *pData; uint32_t unique_id; int status; unique_id = diag_read_buffer->UniqueId; /* * Get the current buffer and look up the unique ID. The unique ID * should be there. */ i = mpr_get_fw_diag_buffer_number(sc, unique_id); if (i == MPR_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPR_FW_DIAG_ERROR_INVALID_UID; return (MPR_DIAG_FAILURE); } pBuffer = &sc->fw_diag_buffer_list[i]; /* * Make sure requested read is within limits */ if (diag_read_buffer->StartingOffset + diag_read_buffer->BytesToRead > pBuffer->size) { *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; return (MPR_DIAG_FAILURE); } /* Sync the DMA map before we copy to userland. */ bus_dmamap_sync(sc->fw_diag_dmat, sc->fw_diag_map, BUS_DMASYNC_POSTREAD); /* * Copy the requested data from DMA to the diag_read_buffer. The DMA * buffer that was allocated is one contiguous buffer. */ pData = (uint8_t *)(sc->fw_diag_buffer + diag_read_buffer->StartingOffset); if (copyout(pData, ioctl_buf, diag_read_buffer->BytesToRead) != 0) return (MPR_DIAG_FAILURE); diag_read_buffer->Status = 0; /* * Set or clear the Force Release flag. */ if (pBuffer->force_release) { diag_read_buffer->Flags |= MPR_FW_DIAG_FLAG_FORCE_RELEASE; } else { diag_read_buffer->Flags &= ~MPR_FW_DIAG_FLAG_FORCE_RELEASE; } /* * If buffer is to be reregistered, make sure it's not already owned by * firmware first. */ status = MPR_DIAG_SUCCESS; if (!pBuffer->owned_by_firmware) { if (diag_read_buffer->Flags & MPR_FW_DIAG_FLAG_REREGISTER) { status = mpr_post_fw_diag_buffer(sc, pBuffer, return_code); } } return (status); } static int mpr_diag_release(struct mpr_softc *sc, mpr_fw_diag_release_t *diag_release, uint32_t *return_code) { mpr_fw_diagnostic_buffer_t *pBuffer; uint8_t i; uint32_t unique_id; int status; unique_id = diag_release->UniqueId; /* * Get the current buffer and look up the unique ID. The unique ID * should be there. */ i = mpr_get_fw_diag_buffer_number(sc, unique_id); if (i == MPR_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPR_FW_DIAG_ERROR_INVALID_UID; return (MPR_DIAG_FAILURE); } pBuffer = &sc->fw_diag_buffer_list[i]; /* * If buffer is not owned by firmware, it's already been released. */ if (!pBuffer->owned_by_firmware) { *return_code = MPR_FW_DIAG_ERROR_ALREADY_RELEASED; return (MPR_DIAG_FAILURE); } /* * Release the buffer. */ status = mpr_release_fw_diag_buffer(sc, pBuffer, return_code, MPR_FW_DIAG_TYPE_RELEASE); return (status); } static int mpr_do_diag_action(struct mpr_softc *sc, uint32_t action, uint8_t *diag_action, uint32_t length, uint32_t *return_code) { mpr_fw_diag_register_t diag_register; mpr_fw_diag_unregister_t diag_unregister; mpr_fw_diag_query_t diag_query; mpr_diag_read_buffer_t diag_read_buffer; mpr_fw_diag_release_t diag_release; int status = MPR_DIAG_SUCCESS; uint32_t original_return_code; original_return_code = *return_code; *return_code = MPR_FW_DIAG_ERROR_SUCCESS; switch (action) { case MPR_FW_DIAG_TYPE_REGISTER: if (!length) { *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPR_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_register, sizeof(diag_register)) != 0) return (MPR_DIAG_FAILURE); status = mpr_diag_register(sc, &diag_register, return_code); break; case MPR_FW_DIAG_TYPE_UNREGISTER: if (length < sizeof(diag_unregister)) { *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPR_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_unregister, sizeof(diag_unregister)) != 0) return (MPR_DIAG_FAILURE); status = mpr_diag_unregister(sc, &diag_unregister, return_code); break; case MPR_FW_DIAG_TYPE_QUERY: if (length < sizeof (diag_query)) { *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPR_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_query, sizeof(diag_query)) != 0) return (MPR_DIAG_FAILURE); status = mpr_diag_query(sc, &diag_query, return_code); if (status == MPR_DIAG_SUCCESS) if (copyout(&diag_query, diag_action, sizeof (diag_query)) != 0) return (MPR_DIAG_FAILURE); break; case MPR_FW_DIAG_TYPE_READ_BUFFER: if (copyin(diag_action, &diag_read_buffer, sizeof(diag_read_buffer)) != 0) return (MPR_DIAG_FAILURE); if (length < diag_read_buffer.BytesToRead) { *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPR_DIAG_FAILURE; break; } status = mpr_diag_read_buffer(sc, &diag_read_buffer, PTRIN(diag_read_buffer.PtrDataBuffer), return_code); if (status == MPR_DIAG_SUCCESS) { if (copyout(&diag_read_buffer, diag_action, sizeof(diag_read_buffer) - sizeof(diag_read_buffer.PtrDataBuffer)) != 0) return (MPR_DIAG_FAILURE); } break; case MPR_FW_DIAG_TYPE_RELEASE: if (length < sizeof(diag_release)) { *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPR_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_release, sizeof(diag_release)) != 0) return (MPR_DIAG_FAILURE); status = mpr_diag_release(sc, &diag_release, return_code); break; default: *return_code = MPR_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPR_DIAG_FAILURE; break; } if ((status == MPR_DIAG_FAILURE) && (original_return_code == MPR_FW_DIAG_NEW) && (*return_code != MPR_FW_DIAG_ERROR_SUCCESS)) status = MPR_DIAG_SUCCESS; return (status); } static int mpr_user_diag_action(struct mpr_softc *sc, mpr_diag_action_t *data) { int status; /* * Only allow one diag action at one time. */ if (sc->mpr_flags & MPR_FLAGS_BUSY) { mpr_dprint(sc, MPR_USER, "%s: Only one FW diag command " "allowed at a single time.", __func__); return (EBUSY); } sc->mpr_flags |= MPR_FLAGS_BUSY; /* * Send diag action request */ if (data->Action == MPR_FW_DIAG_TYPE_REGISTER || data->Action == MPR_FW_DIAG_TYPE_UNREGISTER || data->Action == MPR_FW_DIAG_TYPE_QUERY || data->Action == MPR_FW_DIAG_TYPE_READ_BUFFER || data->Action == MPR_FW_DIAG_TYPE_RELEASE) { status = mpr_do_diag_action(sc, data->Action, PTRIN(data->PtrDiagAction), data->Length, &data->ReturnCode); } else status = EINVAL; sc->mpr_flags &= ~MPR_FLAGS_BUSY; return (status); } /* * Copy the event recording mask and the event queue size out. For * clarification, the event recording mask (events_to_record) is not the same * thing as the event mask (event_mask). events_to_record has a bit set for * every event type that is to be recorded by the driver, and event_mask has a * bit cleared for every event that is allowed into the driver from the IOC. * They really have nothing to do with each other. */ static void mpr_user_event_query(struct mpr_softc *sc, mpr_event_query_t *data) { uint8_t i; mpr_lock(sc); data->Entries = MPR_EVENT_QUEUE_SIZE; for (i = 0; i < 4; i++) { data->Types[i] = sc->events_to_record[i]; } mpr_unlock(sc); } /* * Set the driver's event mask according to what's been given. See * mpr_user_event_query for explanation of the event recording mask and the IOC * event mask. It's the app's responsibility to enable event logging by setting * the bits in events_to_record. Initially, no events will be logged. */ static void mpr_user_event_enable(struct mpr_softc *sc, mpr_event_enable_t *data) { uint8_t i; mpr_lock(sc); for (i = 0; i < 4; i++) { sc->events_to_record[i] = data->Types[i]; } mpr_unlock(sc); } /* * Copy out the events that have been recorded, up to the max events allowed. */ static int mpr_user_event_report(struct mpr_softc *sc, mpr_event_report_t *data) { int status = 0; uint32_t size; mpr_lock(sc); size = data->Size; if ((size >= sizeof(sc->recorded_events)) && (status == 0)) { mpr_unlock(sc); if (copyout((void *)sc->recorded_events, PTRIN(data->PtrEvents), sizeof(sc->recorded_events)) != 0) status = EFAULT; mpr_lock(sc); } else { /* * data->Size value is not large enough to copy event data. */ status = EFAULT; } /* * Change size value to match the number of bytes that were copied. */ if (status == 0) data->Size = sizeof(sc->recorded_events); mpr_unlock(sc); return (status); } /* * Record events into the driver from the IOC if they are not masked. */ void mprsas_record_event(struct mpr_softc *sc, MPI2_EVENT_NOTIFICATION_REPLY *event_reply) { uint32_t event; int i, j; uint16_t event_data_len; boolean_t sendAEN = FALSE; event = event_reply->Event; /* * Generate a system event to let anyone who cares know that a * LOG_ENTRY_ADDED event has occurred. This is sent no matter what the * event mask is set to. */ if (event == MPI2_EVENT_LOG_ENTRY_ADDED) { sendAEN = TRUE; } /* * Record the event only if its corresponding bit is set in * events_to_record. event_index is the index into recorded_events and * event_number is the overall number of an event being recorded since * start-of-day. event_index will roll over; event_number will never * roll over. */ i = (uint8_t)(event / 32); j = (uint8_t)(event % 32); if ((i < 4) && ((1 << j) & sc->events_to_record[i])) { i = sc->event_index; sc->recorded_events[i].Type = event; sc->recorded_events[i].Number = ++sc->event_number; bzero(sc->recorded_events[i].Data, MPR_MAX_EVENT_DATA_LENGTH * 4); event_data_len = event_reply->EventDataLength; if (event_data_len > 0) { /* * Limit data to size in m_event entry */ if (event_data_len > MPR_MAX_EVENT_DATA_LENGTH) { event_data_len = MPR_MAX_EVENT_DATA_LENGTH; } for (j = 0; j < event_data_len; j++) { sc->recorded_events[i].Data[j] = event_reply->EventData[j]; } /* * check for index wrap-around */ if (++i == MPR_EVENT_QUEUE_SIZE) { i = 0; } sc->event_index = (uint8_t)i; /* * Set flag to send the event. */ sendAEN = TRUE; } } /* * Generate a system event if flag is set to let anyone who cares know * that an event has occurred. */ if (sendAEN) { //SLM-how to send a system event (see kqueue, kevent) // (void) ddi_log_sysevent(mpt->m_dip, DDI_VENDOR_LSI, "MPT_SAS", // "SAS", NULL, NULL, DDI_NOSLEEP); } } static int mpr_user_reg_access(struct mpr_softc *sc, mpr_reg_access_t *data) { int status = 0; switch (data->Command) { /* * IO access is not supported. */ case REG_IO_READ: case REG_IO_WRITE: mpr_dprint(sc, MPR_USER, "IO access is not supported. " "Use memory access."); status = EINVAL; break; case REG_MEM_READ: data->RegData = mpr_regread(sc, data->RegOffset); break; case REG_MEM_WRITE: mpr_regwrite(sc, data->RegOffset, data->RegData); break; default: status = EINVAL; break; } return (status); } static int mpr_user_btdh(struct mpr_softc *sc, mpr_btdh_mapping_t *data) { uint8_t bt2dh = FALSE; uint8_t dh2bt = FALSE; uint16_t dev_handle, bus, target; bus = data->Bus; target = data->TargetID; dev_handle = data->DevHandle; /* * When DevHandle is 0xFFFF and Bus/Target are not 0xFFFF, use Bus/ * Target to get DevHandle. When Bus/Target are 0xFFFF and DevHandle is * not 0xFFFF, use DevHandle to get Bus/Target. Anything else is * invalid. */ if ((bus == 0xFFFF) && (target == 0xFFFF) && (dev_handle != 0xFFFF)) dh2bt = TRUE; if ((dev_handle == 0xFFFF) && (bus != 0xFFFF) && (target != 0xFFFF)) bt2dh = TRUE; if (!dh2bt && !bt2dh) return (EINVAL); /* * Only handle bus of 0. Make sure target is within range. */ if (bt2dh) { if (bus != 0) return (EINVAL); if (target >= sc->max_devices) { mpr_dprint(sc, MPR_XINFO, "Target ID is out of range " "for Bus/Target to DevHandle mapping."); return (EINVAL); } dev_handle = sc->mapping_table[target].dev_handle; if (dev_handle) data->DevHandle = dev_handle; } else { bus = 0; target = mpr_mapping_get_tid_from_handle(sc, dev_handle); data->Bus = bus; data->TargetID = target; } return (0); } static int mpr_ioctl(struct cdev *dev, u_long cmd, void *arg, int flag, struct thread *td) { struct mpr_softc *sc; struct mpr_cfg_page_req *page_req; struct mpr_ext_cfg_page_req *ext_page_req; void *mpr_page; int error, msleep_ret; mpr_page = NULL; sc = dev->si_drv1; page_req = (void *)arg; ext_page_req = (void *)arg; switch (cmd) { case MPRIO_READ_CFG_HEADER: mpr_lock(sc); error = mpr_user_read_cfg_header(sc, page_req); mpr_unlock(sc); break; case MPRIO_READ_CFG_PAGE: if (page_req->len < (int)sizeof(MPI2_CONFIG_PAGE_HEADER)) { error = EINVAL; break; } mpr_page = malloc(page_req->len, M_MPRUSER, M_WAITOK | M_ZERO); error = copyin(page_req->buf, mpr_page, sizeof(MPI2_CONFIG_PAGE_HEADER)); if (error) break; mpr_lock(sc); error = mpr_user_read_cfg_page(sc, page_req, mpr_page); mpr_unlock(sc); if (error) break; error = copyout(mpr_page, page_req->buf, page_req->len); break; case MPRIO_READ_EXT_CFG_HEADER: mpr_lock(sc); error = mpr_user_read_extcfg_header(sc, ext_page_req); mpr_unlock(sc); break; case MPRIO_READ_EXT_CFG_PAGE: if (ext_page_req->len < (int)sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)) { error = EINVAL; break; } mpr_page = malloc(ext_page_req->len, M_MPRUSER, M_WAITOK | M_ZERO); error = copyin(ext_page_req->buf, mpr_page, sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); if (error) break; mpr_lock(sc); error = mpr_user_read_extcfg_page(sc, ext_page_req, mpr_page); mpr_unlock(sc); if (error) break; error = copyout(mpr_page, ext_page_req->buf, ext_page_req->len); break; case MPRIO_WRITE_CFG_PAGE: if (page_req->len < (int)sizeof(MPI2_CONFIG_PAGE_HEADER)) { error = EINVAL; break; } mpr_page = malloc(page_req->len, M_MPRUSER, M_WAITOK|M_ZERO); error = copyin(page_req->buf, mpr_page, page_req->len); if (error) break; mpr_lock(sc); error = mpr_user_write_cfg_page(sc, page_req, mpr_page); mpr_unlock(sc); break; case MPRIO_MPR_COMMAND: error = mpr_user_command(sc, (struct mpr_usr_command *)arg); break; case MPTIOCTL_PASS_THRU: /* * The user has requested to pass through a command to be * executed by the MPT firmware. Call our routine which does * this. Only allow one passthru IOCTL at one time. */ error = mpr_user_pass_thru(sc, (mpr_pass_thru_t *)arg); break; case MPTIOCTL_GET_ADAPTER_DATA: /* * The user has requested to read adapter data. Call our * routine which does this. */ error = 0; mpr_user_get_adapter_data(sc, (mpr_adapter_data_t *)arg); break; case MPTIOCTL_GET_PCI_INFO: /* * The user has requested to read pci info. Call * our routine which does this. */ mpr_lock(sc); error = 0; mpr_user_read_pci_info(sc, (mpr_pci_info_t *)arg); mpr_unlock(sc); break; case MPTIOCTL_RESET_ADAPTER: mpr_lock(sc); sc->port_enable_complete = 0; uint32_t reinit_start = time_uptime; error = mpr_reinit(sc); /* Sleep for 300 second. */ msleep_ret = msleep(&sc->port_enable_complete, &sc->mpr_mtx, PRIBIO, "mpr_porten", 300 * hz); mpr_unlock(sc); if (msleep_ret) printf("Port Enable did not complete after Diag " "Reset msleep error %d.\n", msleep_ret); else mpr_dprint(sc, MPR_USER, "Hard Reset with Port Enable " "completed in %d seconds.\n", (uint32_t)(time_uptime - reinit_start)); break; case MPTIOCTL_DIAG_ACTION: /* * The user has done a diag buffer action. Call our routine * which does this. Only allow one diag action at one time. */ mpr_lock(sc); error = mpr_user_diag_action(sc, (mpr_diag_action_t *)arg); mpr_unlock(sc); break; case MPTIOCTL_EVENT_QUERY: /* * The user has done an event query. Call our routine which does * this. */ error = 0; mpr_user_event_query(sc, (mpr_event_query_t *)arg); break; case MPTIOCTL_EVENT_ENABLE: /* * The user has done an event enable. Call our routine which * does this. */ error = 0; mpr_user_event_enable(sc, (mpr_event_enable_t *)arg); break; case MPTIOCTL_EVENT_REPORT: /* * The user has done an event report. Call our routine which * does this. */ error = mpr_user_event_report(sc, (mpr_event_report_t *)arg); break; case MPTIOCTL_REG_ACCESS: /* * The user has requested register access. Call our routine * which does this. */ mpr_lock(sc); error = mpr_user_reg_access(sc, (mpr_reg_access_t *)arg); mpr_unlock(sc); break; case MPTIOCTL_BTDH_MAPPING: /* * The user has requested to translate a bus/target to a * DevHandle or a DevHandle to a bus/target. Call our routine * which does this. */ error = mpr_user_btdh(sc, (mpr_btdh_mapping_t *)arg); break; default: error = ENOIOCTL; break; } if (mpr_page != NULL) free(mpr_page, M_MPRUSER); return (error); } #ifdef COMPAT_FREEBSD32 struct mpr_cfg_page_req32 { MPI2_CONFIG_PAGE_HEADER header; uint32_t page_address; uint32_t buf; int len; uint16_t ioc_status; }; struct mpr_ext_cfg_page_req32 { MPI2_CONFIG_EXTENDED_PAGE_HEADER header; uint32_t page_address; uint32_t buf; int len; uint16_t ioc_status; }; struct mpr_raid_action32 { uint8_t action; uint8_t volume_bus; uint8_t volume_id; uint8_t phys_disk_num; uint32_t action_data_word; uint32_t buf; int len; uint32_t volume_status; uint32_t action_data[4]; uint16_t action_status; uint16_t ioc_status; uint8_t write; }; struct mpr_usr_command32 { uint32_t req; uint32_t req_len; uint32_t rpl; uint32_t rpl_len; uint32_t buf; int len; uint32_t flags; }; #define MPRIO_READ_CFG_HEADER32 _IOWR('M', 200, struct mpr_cfg_page_req32) #define MPRIO_READ_CFG_PAGE32 _IOWR('M', 201, struct mpr_cfg_page_req32) #define MPRIO_READ_EXT_CFG_HEADER32 _IOWR('M', 202, struct mpr_ext_cfg_page_req32) #define MPRIO_READ_EXT_CFG_PAGE32 _IOWR('M', 203, struct mpr_ext_cfg_page_req32) #define MPRIO_WRITE_CFG_PAGE32 _IOWR('M', 204, struct mpr_cfg_page_req32) #define MPRIO_RAID_ACTION32 _IOWR('M', 205, struct mpr_raid_action32) #define MPRIO_MPR_COMMAND32 _IOWR('M', 210, struct mpr_usr_command32) static int mpr_ioctl32(struct cdev *dev, u_long cmd32, void *_arg, int flag, struct thread *td) { struct mpr_cfg_page_req32 *page32 = _arg; struct mpr_ext_cfg_page_req32 *ext32 = _arg; struct mpr_raid_action32 *raid32 = _arg; struct mpr_usr_command32 *user32 = _arg; union { struct mpr_cfg_page_req page; struct mpr_ext_cfg_page_req ext; struct mpr_raid_action raid; struct mpr_usr_command user; } arg; u_long cmd; int error; switch (cmd32) { case MPRIO_READ_CFG_HEADER32: case MPRIO_READ_CFG_PAGE32: case MPRIO_WRITE_CFG_PAGE32: if (cmd32 == MPRIO_READ_CFG_HEADER32) cmd = MPRIO_READ_CFG_HEADER; else if (cmd32 == MPRIO_READ_CFG_PAGE32) cmd = MPRIO_READ_CFG_PAGE; else cmd = MPRIO_WRITE_CFG_PAGE; CP(*page32, arg.page, header); CP(*page32, arg.page, page_address); PTRIN_CP(*page32, arg.page, buf); CP(*page32, arg.page, len); CP(*page32, arg.page, ioc_status); break; case MPRIO_READ_EXT_CFG_HEADER32: case MPRIO_READ_EXT_CFG_PAGE32: if (cmd32 == MPRIO_READ_EXT_CFG_HEADER32) cmd = MPRIO_READ_EXT_CFG_HEADER; else cmd = MPRIO_READ_EXT_CFG_PAGE; CP(*ext32, arg.ext, header); CP(*ext32, arg.ext, page_address); PTRIN_CP(*ext32, arg.ext, buf); CP(*ext32, arg.ext, len); CP(*ext32, arg.ext, ioc_status); break; case MPRIO_RAID_ACTION32: cmd = MPRIO_RAID_ACTION; CP(*raid32, arg.raid, action); CP(*raid32, arg.raid, volume_bus); CP(*raid32, arg.raid, volume_id); CP(*raid32, arg.raid, phys_disk_num); CP(*raid32, arg.raid, action_data_word); PTRIN_CP(*raid32, arg.raid, buf); CP(*raid32, arg.raid, len); CP(*raid32, arg.raid, volume_status); bcopy(raid32->action_data, arg.raid.action_data, sizeof arg.raid.action_data); CP(*raid32, arg.raid, ioc_status); CP(*raid32, arg.raid, write); break; case MPRIO_MPR_COMMAND32: cmd = MPRIO_MPR_COMMAND; PTRIN_CP(*user32, arg.user, req); CP(*user32, arg.user, req_len); PTRIN_CP(*user32, arg.user, rpl); CP(*user32, arg.user, rpl_len); PTRIN_CP(*user32, arg.user, buf); CP(*user32, arg.user, len); CP(*user32, arg.user, flags); break; default: return (ENOIOCTL); } error = mpr_ioctl(dev, cmd, &arg, flag, td); if (error == 0 && (cmd32 & IOC_OUT) != 0) { switch (cmd32) { case MPRIO_READ_CFG_HEADER32: case MPRIO_READ_CFG_PAGE32: case MPRIO_WRITE_CFG_PAGE32: CP(arg.page, *page32, header); CP(arg.page, *page32, page_address); PTROUT_CP(arg.page, *page32, buf); CP(arg.page, *page32, len); CP(arg.page, *page32, ioc_status); break; case MPRIO_READ_EXT_CFG_HEADER32: case MPRIO_READ_EXT_CFG_PAGE32: CP(arg.ext, *ext32, header); CP(arg.ext, *ext32, page_address); PTROUT_CP(arg.ext, *ext32, buf); CP(arg.ext, *ext32, len); CP(arg.ext, *ext32, ioc_status); break; case MPRIO_RAID_ACTION32: CP(arg.raid, *raid32, action); CP(arg.raid, *raid32, volume_bus); CP(arg.raid, *raid32, volume_id); CP(arg.raid, *raid32, phys_disk_num); CP(arg.raid, *raid32, action_data_word); PTROUT_CP(arg.raid, *raid32, buf); CP(arg.raid, *raid32, len); CP(arg.raid, *raid32, volume_status); bcopy(arg.raid.action_data, raid32->action_data, sizeof arg.raid.action_data); CP(arg.raid, *raid32, ioc_status); CP(arg.raid, *raid32, write); break; case MPRIO_MPR_COMMAND32: PTROUT_CP(arg.user, *user32, req); CP(arg.user, *user32, req_len); PTROUT_CP(arg.user, *user32, rpl); CP(arg.user, *user32, rpl_len); PTROUT_CP(arg.user, *user32, buf); CP(arg.user, *user32, len); CP(arg.user, *user32, flags); break; } } return (error); } #endif /* COMPAT_FREEBSD32 */ static int mpr_ioctl_devsw(struct cdev *dev, u_long com, caddr_t arg, int flag, struct thread *td) { #ifdef COMPAT_FREEBSD32 if (SV_CURPROC_FLAG(SV_ILP32)) return (mpr_ioctl32(dev, com, arg, flag, td)); #endif return (mpr_ioctl(dev, com, arg, flag, td)); }