path: root/sys/i386/isa/sound/pas2_pcm.c

#define _PAS2_PCM_C_
/*
 * sound/pas2_pcm.c
 * 
 * The low level driver for the Pro Audio Spectrum ADC/DAC.
 * 
 * Copyright by Hannu Savolainen 1993
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: 1. Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer. 2.
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 */

#include <i386/isa/sound/sound_config.h>

#if defined(CONFIG_PAS) && defined(CONFIG_AUDIO)
#include <i386/isa/sound/pas_hw.h>


#define TRACE(WHAT)		/* * * (WHAT)   */

#define PAS_PCM_INTRBITS (0x08)
/*
 * Sample buffer timer interrupt enable
 */

#define PCM_NON	0
#define PCM_DAC	1
#define PCM_ADC	2

static u_long pcm_speed = 0;	/* sampling rate */
static u_char pcm_channels = 1;	/* channels (1 or 2) */
static u_char pcm_bits = 8;	/* bits/sample (8 or 16) */
static u_char pcm_filter = 0;	/* filter FLAG */
static u_char pcm_mode = PCM_NON;
static u_long pcm_count = 0;
static u_short pcm_bitsok = 8;	/* mask of OK bits */
static int      my_devnum = 0;
static int	open_mode = 0;

int
pcm_set_speed(int arg)
{
	int             foo, tmp;
	u_long   flags;

	if (arg > 44100)
		arg = 44100;
	if (arg < 5000)
		arg = 5000;

	foo = (1193180 + (arg / 2)) / arg;
	arg = 1193180 / foo;

	if (pcm_channels & 2)
		foo = foo >> 1;

	pcm_speed = arg;

	tmp = pas_read(FILTER_FREQUENCY);

	/*
	 * Set anti-aliasing filters according to sample rate. You reall
	 * *NEED* to enable this feature for all normal recording unless you
	 * want to experiment with aliasing effects. These filters apply to
	 * the selected "recording" source. I (pfw) don't know the encoding
	 * of these 5 bits. The values shown come from the SDK found on
	 * ftp.uwp.edu:/pub/msdos/proaudio/.
	 */
#if !defined NO_AUTO_FILTER_SET
	tmp &= 0xe0;
	if (pcm_speed >= 2 * 17897)
		tmp |= 0x21;
	else if (pcm_speed >= 2 * 15909)
		tmp |= 0x22;
	else if (pcm_speed >= 2 * 11931)
		tmp |= 0x29;
	else if (pcm_speed >= 2 * 8948)
		tmp |= 0x31;
	else if (pcm_speed >= 2 * 5965)
		tmp |= 0x39;
	else if (pcm_speed >= 2 * 2982)
		tmp |= 0x24;
	pcm_filter = tmp;
#endif

	flags = splhigh();

	pas_write(tmp & ~(F_F_PCM_RATE_COUNTER | F_F_PCM_BUFFER_COUNTER), FILTER_FREQUENCY);
	pas_write(S_C_C_SAMPLE_RATE | S_C_C_LSB_THEN_MSB | S_C_C_SQUARE_WAVE, SAMPLE_COUNTER_CONTROL);
	pas_write(foo & 0xff, SAMPLE_RATE_TIMER);
	pas_write((foo >> 8) & 0xff, SAMPLE_RATE_TIMER);
	pas_write(tmp, FILTER_FREQUENCY);

	splx(flags);

	return pcm_speed;
}

int
pcm_set_channels(int arg)
{

	if ((arg != 1) && (arg != 2))
		return pcm_channels;

	if (arg != pcm_channels) {
		pas_write(pas_read(PCM_CONTROL) ^ P_C_PCM_MONO, PCM_CONTROL);

		pcm_channels = arg;
		pcm_set_speed(pcm_speed);	/* The speed must be
						 * reinitialized */
	}
	return pcm_channels;
}

int
pcm_set_bits(int arg)
{
	if ((arg & pcm_bitsok) != arg)
		return pcm_bits;

	if (arg != pcm_bits) {
		pas_write(pas_read(SYSTEM_CONFIGURATION_2) ^ S_C_2_PCM_16_BIT, SYSTEM_CONFIGURATION_2);

		pcm_bits = arg;
	}
	return pcm_bits;
}

static int
pas_pcm_ioctl(int dev, u_int cmd, ioctl_arg arg, int local)
{
	TRACE(printf("pas2_pcm.c: static int pas_pcm_ioctl(u_int cmd = %X, u_int arg = %X)\n", cmd, arg));

	switch (cmd) {
	case SOUND_PCM_WRITE_RATE:
		if (local)
			return pcm_set_speed((int) arg);
		return *(int *) arg = pcm_set_speed((*(int *) arg));
		break;

	case SOUND_PCM_READ_RATE:
		if (local)
			return pcm_speed;
		return *(int *) arg = pcm_speed;
		break;

	case SNDCTL_DSP_STEREO:
		if (local)
			return pcm_set_channels((int) arg + 1) - 1;
		return *(int *) arg = pcm_set_channels((*(int *) arg) + 1) - 1;
		break;

	case SOUND_PCM_WRITE_CHANNELS:
		if (local)
			return pcm_set_channels((int) arg);
		return *(int *) arg = pcm_set_channels((*(int *) arg));
		break;

	case SOUND_PCM_READ_CHANNELS:
		if (local)
			return pcm_channels;
		return *(int *) arg = pcm_channels;
		break;

	case SNDCTL_DSP_SETFMT:
		if (local)
			return pcm_set_bits((int) arg);
		return *(int *) arg = pcm_set_bits((*(int *) arg));
		break;

	case SOUND_PCM_READ_BITS:
		if (local)
			return pcm_bits;
		return *(int *) arg = pcm_bits;

	case SOUND_PCM_WRITE_FILTER:	/* NOT YET IMPLEMENTED */
		if ((*(int *) arg) > 1)
			return -(EINVAL);
		pcm_filter = (*(int *) arg);
		break;

	case SOUND_PCM_READ_FILTER:
		return *(int *) arg = pcm_filter;
		break;

	default:
		return -(EINVAL);
	}

	return -(EINVAL);
}

static void
pas_pcm_reset(int dev)
{
	TRACE(printf("pas2_pcm.c: static void pas_pcm_reset(void)\n"));

	pas_write(pas_read(PCM_CONTROL) & ~P_C_PCM_ENABLE, PCM_CONTROL);
}

static int
pas_pcm_open(int dev, int mode)
{
	int             err;

	TRACE(printf("pas2_pcm.c: static int pas_pcm_open(int mode = %X)\n", mode));

	if ((err = pas_set_intr(PAS_PCM_INTRBITS)) < 0)
		return err;


	pcm_count = 0;
	open_mode = mode;

	return 0;
}

static void
pas_pcm_close(int dev)
{
	u_long   flags;

	TRACE(printf("pas2_pcm.c: static void pas_pcm_close(void)\n"));

	flags = splhigh();

	pas_pcm_reset(dev);
	pas_remove_intr(PAS_PCM_INTRBITS);
	pcm_mode = PCM_NON;

	open_mode = 0;

	splx(flags);
}

static void
pas_pcm_output_block(int dev, u_long buf, int count,
		     int intrflag, int restart_dma)
{
	u_long   flags, cnt;

	TRACE(printf("pas2_pcm.c: static void pas_pcm_output_block(char *buf = %P, int count = %X)\n", buf, count));

	cnt = count;
	if (audio_devs[dev]->dmachan1 > 3)
		cnt >>= 1;

	if (audio_devs[dev]->flags & DMA_AUTOMODE &&
	    intrflag &&
	    cnt == pcm_count)
		return;		/* Auto mode on. No need to react */

	flags = splhigh();

	pas_write(pas_read(PCM_CONTROL) & ~P_C_PCM_ENABLE,
		  PCM_CONTROL);

	if (restart_dma)
		DMAbuf_start_dma(dev, buf, count, 1);

	if (audio_devs[dev]->dmachan1 > 3)
		count >>= 1;

	if (count != pcm_count) {
		pas_write(pas_read(FILTER_FREQUENCY) & ~F_F_PCM_BUFFER_COUNTER, FILTER_FREQUENCY);
		pas_write(S_C_C_SAMPLE_BUFFER | S_C_C_LSB_THEN_MSB | S_C_C_SQUARE_WAVE, SAMPLE_COUNTER_CONTROL);
		pas_write(count & 0xff, SAMPLE_BUFFER_COUNTER);
		pas_write((count >> 8) & 0xff, SAMPLE_BUFFER_COUNTER);
		pas_write(pas_read(FILTER_FREQUENCY) | F_F_PCM_BUFFER_COUNTER, FILTER_FREQUENCY);

		pcm_count = count;
	}
	pas_write(pas_read(FILTER_FREQUENCY) | F_F_PCM_BUFFER_COUNTER | F_F_PCM_RATE_COUNTER, FILTER_FREQUENCY);
#ifdef NO_TRIGGER
	pas_write(pas_read(PCM_CONTROL) | P_C_PCM_ENABLE | P_C_PCM_DAC_MODE, PCM_CONTROL);
#endif

	pcm_mode = PCM_DAC;

	splx(flags);
}

static void
pas_pcm_start_input(int dev, u_long buf, int count,
		    int intrflag, int restart_dma)
{
	u_long   flags;
	int             cnt;

	TRACE(printf("pas2_pcm.c: static void pas_pcm_start_input(char *buf = %P, int count = %X)\n", buf, count));

	cnt = count;
	if (audio_devs[dev]->dmachan1 > 3)
		cnt >>= 1;

	if (audio_devs[my_devnum]->flags & DMA_AUTOMODE &&
	    intrflag &&
	    cnt == pcm_count)
		return;		/* Auto mode on. No need to react */

	flags = splhigh();

	if (restart_dma)
		DMAbuf_start_dma(dev, buf, count, 0);

	if (audio_devs[dev]->dmachan1 > 3)
		count >>= 1;

	if (count != pcm_count) {
		pas_write(pas_read(FILTER_FREQUENCY) & ~F_F_PCM_BUFFER_COUNTER, FILTER_FREQUENCY);
		pas_write(S_C_C_SAMPLE_BUFFER | S_C_C_LSB_THEN_MSB | S_C_C_SQUARE_WAVE, SAMPLE_COUNTER_CONTROL);
		pas_write(count & 0xff, SAMPLE_BUFFER_COUNTER);
		pas_write((count >> 8) & 0xff, SAMPLE_BUFFER_COUNTER);
		pas_write(pas_read(FILTER_FREQUENCY) | F_F_PCM_BUFFER_COUNTER, FILTER_FREQUENCY);

		pcm_count = count;
	}
	pas_write(pas_read(FILTER_FREQUENCY) | F_F_PCM_BUFFER_COUNTER | F_F_PCM_RATE_COUNTER, FILTER_FREQUENCY);
#ifdef NO_TRIGGER
	pas_write((pas_read(PCM_CONTROL) | P_C_PCM_ENABLE) & ~P_C_PCM_DAC_MODE, PCM_CONTROL);
#endif

	pcm_mode = PCM_ADC;

	splx(flags);
}
#ifndef NO_TRIGGER
static void
pas_audio_trigger (int dev, int state)
{
  unsigned long   flags;

  flags = splhigh();

  state &= open_mode;

  if (state & PCM_ENABLE_OUTPUT)
    pas_write (pas_read (0xF8A) | 0x40 | 0x10, 0xF8A);
  else if (state & PCM_ENABLE_INPUT)
    pas_write ((pas_read (0xF8A) | 0x40) & ~0x10, 0xF8A);
  else
    pas_write (pas_read (0xF8A) & ~0x40, 0xF8A);

  splx(flags);
}
#endif

static int
pas_pcm_prepare_for_input(int dev, int bsize, int bcount)
{
	return 0;
}
static int
pas_pcm_prepare_for_output(int dev, int bsize, int bcount)
{
	return 0;
}

static struct audio_operations pas_pcm_operations =
{
	"Pro Audio Spectrum",
	DMA_AUTOMODE,
	AFMT_U8 | AFMT_S16_LE,
	NULL,
	pas_pcm_open,
	pas_pcm_close,
	pas_pcm_output_block,
	pas_pcm_start_input,
	pas_pcm_ioctl,
	pas_pcm_prepare_for_input,
	pas_pcm_prepare_for_output,
	pas_pcm_reset,
	pas_pcm_reset,
	NULL,
	NULL,
	NULL,
	NULL,
	pas_audio_trigger
};

void
pas_pcm_init(struct address_info * hw_config)
{
	pcm_bitsok = 8;
	if (pas_read(OPERATION_MODE_1) & O_M_1_PCM_TYPE)
		pcm_bitsok |= 16;

	pcm_set_speed(DSP_DEFAULT_SPEED);

	if (num_audiodevs < MAX_AUDIO_DEV) {
		audio_devs[my_devnum = num_audiodevs++] = &pas_pcm_operations;
		audio_devs[my_devnum]->dmachan1 = hw_config->dma;
		audio_devs[my_devnum]->buffsize = DSP_BUFFSIZE;
	} else
		printf("PAS2: Too many PCM devices available\n");

	return;
}

void
pas_pcm_interrupt(u_char status, int cause)
{
	if (cause == 1) {	/* PCM buffer done */
		/*
		 * Halt the PCM first. Otherwise we don't have time to start
		 * a new block before the PCM chip proceeds to the next
		 * sample
		 */

		if (!(audio_devs[my_devnum]->flags & DMA_AUTOMODE)) {
			pas_write(pas_read(PCM_CONTROL) & ~P_C_PCM_ENABLE,
				  PCM_CONTROL);
		}
		switch (pcm_mode) {

		case PCM_DAC:
			DMAbuf_outputintr(my_devnum, 1);
			break;

		case PCM_ADC:
			DMAbuf_inputintr(my_devnum);
			break;

		default:
			printf("PAS: Unexpected PCM interrupt\n");
		}
	}
}

#endif