# New ports collection makefile for: subversion
# Date created: 10 September 2001
# Whom: rooneg@electricjellyfish.net
#
# $FreeBSD$
PORTNAME= subversion
PORTVERSION= 1.1.4
CATEGORIES= devel
MASTER_SITES= http://subversion.tigris.org/tarballs/
MAINTAINER= lev@freebsd.org
COMMENT= Version control system
LIB_DEPENDS= expat.5:${PORTSDIR}/textproc/expat2
INSTALLS_SHLIB= yes
USE_BZIP2= yes
USE_LIBTOOL_VER=15
USE_REINPLACE= yes
CONFIGURE_TARGET= --build=${MACHINE_ARCH}-portbld-freebsd${OSREL}
CONFIGURE_ARGS= --with-ssl
MAN1= svn.1 svnadmin.1 svnlook.1 svndumpfilter.1 svnversion.1
MAN5= svnserve.conf.5
MAN8= svnserve.8
MANCOMPRESSED= no
TXT_DOCS= BUGS CHANGES COMMITTERS COPYING HACKING INSTALL README
.if !defined(NOPORTDOCS)
PORTDOCS= ${TXT_DOCS}
.endif
.if !defined(WITHOUT_NLS)
USE_GETTEXT= yes
PLIST_SUB+= WITHOUT_GETTEXT=""
.else
CONFIGURE_ARGS+= --disable-nls
PLIST_SUB+= WITHOUT_GETTEXT="@comment "
.endif
.include <bsd.port.pre.mk>
SVNREPOS?= /home/svn/repos
SVNFSTYPE?= bdb
.if make(repository)
WITH_REPOSITORY_CREATION= yes
.endif
.if defined(WITH_REPOSITORY_CREATION)
MKREPOS_TARGET= _mkrepos
.endif
.if defined(WITH_MAINTAINER_DEBUG)
CONFIGURE_ARGS+=--enable-maintainer-mode \
--enable-debug
CFLAGS+= -g
.endif
.if !defined(WITHOUT_NEON)
LIB_DEPENDS+= neon.24:${PORTSDIR}/www/neon
CONFIGURE_ARGS+= --with-neon=${LOCALBASE}
PLIST_SUB+= WITHOUT_NEON=""
.else
CONFIGURE_ARGS+= --without-neon
PLIST_SUB+= WITHOUT_NEON="@comment "
.endif
.if defined(WITHOUT_BDB)
CONFIGURE_ARGS+= --without-berkeley-db
PLIST_SUB+= WITHOUT_BDB="@comment "
.else
PLIST_SUB+= WITHOUT_BDB=""
.endif
.if defined(WITH_PERL)
.if ${PERL_LEVEL} < 500800
IGNORE= "Subversion\'s Perl bindings need perl 5.8.0 or greater. Upgrade your perl and try again"
.endif
SWIG_BINDINGS+= perl
USE_PERL5= yes
PLIST_SUB+= WITH_PERL=""
MAN3PREFIX= ${PREFIX}/lib/perl5/${PERL_VERSION}
MAN3= SVN::Base.3 \
SVN::Client.3 \
SVN::Core.3 \
SVN::Delta.3 \
SVN::Fs.3 \
SVN::Ra.3 \
SVN::Repos.3 \
SVN::Wc.3
.else
PLIST_SUB+= WITH_PERL="@comment "
.endif
.if defined(WITH_PYTHON)
USE_PYTHON= yes
.include "${PORTSDIR}/Mk/bsd.python.mk"
SWIG_BINDINGS+= python
PLIST_SUB+= WITH_PYTHON=""
.else
PLIST_SUB+= WITH_PYTHON="@comment "
.endif
#.if defined(WITH_JAVA)
#USE_JAVA= yes
#JAVA_VERSION= 1.2+
#JAVA_OS= native
#JAVA_BUILD= yes
#JAVA_RUN= yes
#.include "${PORTSDIR}/Mk/bsd.java.mk"
#CONFIGURE_ARGS+= --enable-javahl --with-jdk=${JAVA_HOME}
#PLIST_SUB+= WITH_JAVA=""
#.else
#PLIST_SUB+= WITH_JAVA="@comment "
#.endif
.if defined(SWIG_BINDINGS) && ${SWIG_BINDINGS} != ""
BUILD_DEPENDS+= swig1.3:${PORTSDIR}/devel/swig13
DEPENDS_ARGS+= SWIG_LANGUAGES='${SWIG_BINDINGS}'
CONFIGURE_ARGS+= --with-swig=${LOCALBASE} \
--enable-swig-bindings=${SWIG_BINDINGS:Q:S/ /,/g:S/\\//g}
.else
CONFIGURE_ARGS+= --without-swig --disable-swig-bindings
.endif
.if defined(WITH_MOD_DAV_SVN)
WITH_APACHE2_APR= yes
CONFIGURE_ARGS+= --with-apxs=${APXS}
PLIST_SUB+= MOD_DAV_SVN=""
SVNGROUP?= www
.else
PLIST_SUB+= MOD_DAV_SVN="@comment "
PKGDEINSTALL= NONEXISTENT
SVNGROUP?= svn
.endif
.if defined(WITH_APACHE2_APR)
APACHE2_PORT?= www/apache2
BUILD_DEPENDS+= ${APXS}:${PORTSDIR}/${APACHE2_PORT}
RUN_DEPENDS+= ${APXS}:${PORTSDIR}/${APACHE2_PORT}
APR_APU_DIR= ${LOCALBASE}/lib/apache2
APR_CONFIG= apr-config
APU_CONFIG= apu-config
APR_PORT= www/apache2
.if !defined(WITHOUT_BDB)
DEPENDS_ARGS+= WITH_BERKELEYDB=db4
OPT_NAME= WITH_BERKELEYDB=(db4|db41|db42)
.endif
.else
APR_APU_DIR= ${LOCALBASE}/bin
APR_CONFIG= apr-1-config
APU_CONFIG= apu-1-config
.if !defined(WITHOUT_BDB)
LIB_DEPENDS+= apr-1.0:${PORTSDIR}/devel/apr-svn
APR_PORT= devel/apr-svn
OPT_NAME= APR_UTIL_WITH_BERKELEY_DB=yes
.else
LIB_DEPENDS+= apr-1.0:${PORTSDIR}/devel/apr
APR_PORT= devel/apr
.endif
.endif
CONFIGURE_ARGS+=--with-apr=${APR_APU_DIR}/${APR_CONFIG} \
--with-apr-util=${APR_APU_DIR}/${APU_CONFIG}
.if defined(WITH_SVNSERVE_WRAPPER)
PLIST_SUB+= SVNSERVE_WRAPPER=""
EXTRA_PATCHES= ${PATCHDIR}/build-outputs.mk.patch
.else
PLIST_SUB+= SVNSERVE_WRAPPER="@comment "
.endif
.if !defined(NOPORTDOCS) && defined(WITH_BOOK)
PORTDOCS+= book
.endif
SCRIPTS=
SCRIPTS_DATA=
pre-extract:
@${ECHO_MSG} ""
.if defined(WITHOUT_NEON)
@${ECHO_MSG} "WebDAV/Delta-V repository access module disabled."
.else
@${ECHO_MSG} "WebDAV/Delta-V repository access module enabled."
@${ECHO_MSG} "To disable it define WITHOUT_NEON"
.endif
@${ECHO_MSG} ""
.if defined(WITHOUT_BDB)
@${ECHO_MSG} "db4 repository backend disabled."
.else
@${ECHO_MSG} "db4 repository backend enabled."
@${ECHO_MSG} "To disable it define WITHOUT_DBD"
.endif
@${ECHO_MSG} ""
.if defined(WITH_MAINTAINER_DEBUG)
@${ECHO_MSG} "Build debug version."
.else
@${ECHO_MSG} "You can enable debug build by defining WITH_MAINTAINER_DEBUG."
.endif
@${ECHO_MSG} ""
.if defined(WITH_PERL)
@${ECHO_MSG} "Build with perl bindings."
@${ECHO_MSG} "Be sure, that apr library and perl both uses OR not uses threads in same time."
.else
@${ECHO_MSG} "You can enable perl bindings by defining WITH_PERL"
.endif
@${ECHO_MSG} ""
.if defined(WITH_PYTHON)
@${ECHO_MSG} "Build with Python bindings."
.else
@${ECHO_MSG} "You can enable Python bindings by defining WITH_PYTHON."
.endif
@${ECHO_MSG} ""
#.if defined(WITH_JAVA)
# @${ECHO_MSG} "Build with Java (JavaHL) bindings."
#.else
# @${ECHO_MSG} "You can enable Java bindings by defining WITH_JAVA."
# @${ECHO_MSG} "You should have apr builded with threads for Java support!"
#.endif
# @${ECHO_MSG} ""
.if defined(WITH_MOD_DAV_SVN)
@${ECHO_MSG} "mod_dav_svn module for Apache 2.X enabled."
.else
@${ECHO_MSG} "You can enable the mod_dav_svn module for Apache 2.X"
@${ECHO_MSG} "by defining WITH_MOD_DAV_SVN. This option implies"
@${ECHO_MSG} "the WITH_APACHE2_APR option."
.endif
@${ECHO_MSG} ""
.if defined(WITH_APACHE2_APR)
@${ECHO_MSG} "Using APR from www/apache2. If you have the devel/apr"
@${ECHO_MSG} "port/package installed, you may need to remove it."
.else
@${ECHO_MSG} "You can link subversion against the APR built with"
@${ECHO_MSG} "the www/apache2 port, rather than the devel/apr port,"
@${ECHO_MSG} "by defining WITH_APACHE2_APR."
.endif
@${ECHO_MSG} ""
.if defined(WITH_SVNSERVE_WRAPPER)
@${ECHO_MSG} "svnserve wrapper enabled."
.else
@${ECHO_MSG} "You can install the svnserve wrapper (sets umask 002)"
@${ECHO_MSG} "by defining WITH_SVNSERVE_WRAPPER."
.endif
@${ECHO_MSG} ""
.if defined(WITH_REPOSITORY_CREATION)
@${ECHO_MSG} "I will create (or use, if it exists) \"${SVNGROUP}\" group."
@${ECHO_MSG} "Make sure that all committers are its members."
.else
@${ECHO_MSG} "You can have the repository created for you by defining"
@${ECHO_MSG} "WITH_REPOSITORY_CREATION."
@${ECHO_MSG} ""
@${ECHO_MSG} "Make sure that:"
@${ECHO_MSG} "* all your svn users are members of a common group"
@${ECHO_MSG} "* this group is the group id of the db/ and locks/"
@${ECHO_MSG} " subdirectories of your repository"
@${ECHO_MSG} "* the above subdirectories are writable by this group"
@${ECHO_MSG} ""
@${ECHO_MSG} "Repository will be created at '${SVNREPOS}' with group '${SVNGROUP}'."
@${ECHO_MSG} "Type of repository will be '${SVNFSTYPE}'."
@${ECHO_MSG} "You could change these settings by defining SVNREPOS, SVNGROUP nad SVNFSTYPE"
@${ECHO_MSG} ""
.endif
@${ECHO_MSG} ""
.if !defined(NOPORTDOCS) && defined(WITH_BOOK)
@${ECHO_MSG} "Subversion Book will be installed."
.else
@${ECHO_MSG} "You can install the Subversion Book by defining WITH_BOOK."
.endif
@${ECHO_MSG} ""
@${ECHO_MSG} "May useful scripts will be installed into ${PREFIX}/share/subversion"
post-extract:
@${RM} -r ${WRKSRC}/neon
@${RM} -r ${WRKSRC}/apr
@${RM} -r ${WRKSRC}/apr-util
post-patch:
.if ${PREFIX} != "/usr"
@${REINPLACE_CMD} "s#/etc/subversion#${PREFIX}/etc/subversion#g" ${WRKSRC}/subversion/libsvn_subr/config_file.c
@${REINPLACE_CMD} "s#/etc/subversion#${PREFIX}/etc/subversion#g" ${WRKSRC}/subversion/libsvn_subr/config_impl.h
.endif
@${REINPLACE_CMD} "s#^swig_pydir =.*#swig_pydir = ${PYTHON_SITELIBDIR}/libsvn#" ${WRKSRC}/Makefile.in
@${REINPLACE_CMD} "s#^swig_pydir_extra =.*#swig_pydir_extra = ${PYTHON_SITELIBDIR}/svn#" ${WRKSRC}/Makefile.in
@${REINPLACE_CMD} "s#^LIBTOOL =.*#LIBTOOL = ${LIBTOOL}#" ${WRKSRC}/Makefile.in
pre-configure:
@if [ ! -x ${APR_APU_DIR}/${APR_CONFIG} -o ! -x ${APR_APU_DIR}/${APU_CONFIG} ] ; then \
${ECHO_MSG} "" ; \
${ECHO_MSG} 'You selected to use`'"${APR_PORT}' for apr library." ; \
${ECHO_MSG} 'It seems that `'"${APR_PORT}' is not properly installed." ; \
${ECHO_MSG} "" ; \
${FALSE} ; \
fi
.if !defined(WITHOUT_BDB)
@if [ `${APR_APU_DIR}/${APU_CONFIG} --db-version` != "4" ] ; then \
${ECHO_MSG} "" ; \
${ECHO_MSG} 'You should build `'"${APR_PORT}' with db4 support to use subversion with it." ; \
${ECHO_MSG} 'Please rebuild `'"${APR_PORT}' with option "'`'"${OPT_NAME}' and try again." ; \
${ECHO_MSG} "" ; \
${ECHO_MSG} "Or you can disable db4 support. Only 'fs' repository backend will be availible." ; \
${ECHO_MSG} "To disable db4 support, define WITHOUT_BDB." ; \
${ECHO_MSG} "" ; \
${FALSE} ; \
fi
.endif
post-build:
.if defined(WITH_PERL)
cd ${WRKSRC} ; \
${MAKE} swig-pl
.endif
.if defined(WITH_PYTHON)
cd ${WRKSRC} ; \
${MAKE} swig-py
.endif
#.if defined(WITH_JAVA)
# @${MKDIR} ${WRKSRC}/subversion/bindings/java/javahl/classes
# cd ${WRKSRC} ; \
# ${MAKE} javahl
#.endif
.if defined(WITH_MOD_DAV_SVN)
pre-install:
${APXS} -e -S LIBEXECDIR=${PREFIX}/libexec/apache2 -a -n dav libexec/apache2/mod_dav.so
.endif
post-install: ${MKREPOS_TARGET}
@${MKDIR} ${PREFIX}/share/subversion
cd ${WRKSRC}/tools ; \
tar --exclude '*.in' -cf - * | tar -C ${PREFIX}/share/subversion -xf -
.if !defined(NOPORTDOCS)
${MKDIR} ${DOCSDIR}
for f in ${TXT_DOCS}; do \
${INSTALL_DATA} ${WRKSRC}/$$f ${DOCSDIR}; \
done
.if defined(WITH_BOOK)
@${MKDIR} ${DOCSDIR}/book/images
cd ${WRKSRC}/doc/book/book ; \
${INSTALL_DATA} svn-book.html svn-book.pdf ${DOCSDIR}/book
cd ${WRKSRC}/doc/book/book/images ; \
${INSTALL_DATA} *.png ${DOCSDIR}/book/images
.endif
.endif
.if defined(WITH_PERL)
cd ${WRKSRC} ; \
${REINPLACE_CMD} '/SWIG_PL_DIR/s, install$$, all pure_install,g' ${WRKSRC}/Makefile ; \
${MAKE} install-swig-pl
.endif
.if defined(WITH_PYTHON)
cd ${WRKSRC} ; \
${MAKE} install-swig-py
.endif
#.if defined(WITH_JAVA)
# cd ${WRKSRC} ; \
# ${MAKE} install-javahl
#.endif
.if defined(WITH_SVNSERVE_WRAPPER)
@${INSTALL_SCRIPT} ${FILESDIR}/svnserve.wrapper ${PREFIX}/bin/svnserve
.endif
repository: _mkrepos
_SVNGRPFILES= dav db locks locks/db.lock locks/db-logs.lock
SVNGRPFILES= ${_SVNGRPFILES:S,^,${SVNREPOS}/,}
_mkrepos: .USE
.if !exists(${SVNREPOS})
.if defined(WITH_SVNSERVE_WRAPPER)
@if /usr/sbin/pw groupshow "${SVNGROUP}" >/dev/null 2>&1; then \
${ECHO_MSG} "You already have a group \"${SVNGROUP}\", so I will use it."; \
else \
if /usr/sbin/pw groupadd ${SVNGROUP} -h -; \
then \
${ECHO_MSG} "Added group \"${SVNGROUP}\"."; \
else \
${ECHO_MSG} "Adding group \"${SVNGROUP}\" failed..."; \
${ECHO_MSG} "Please create it, and try again."; \
${FALSE}; \
fi; \
fi
.endif
@${MKDIR} ${SVNREPOS}
@${PREFIX}/bin/svnadmin create --fs-type ${SVNFSTYPE} ${SVNREPOS}
.if defined(WITH_SVNSERVE_WRAPPER)
@${CHGRP} ${SVNGROUP} ${SVNGRPFILES}
@${CHMOD} g+w ${SVNGRPFILES}
@for i in ${SVNREPOS}/db/* ; do \
i=$${i##*/}; \
case $$i in \
DB_CONFIG|fs-type|uuid) ;; \
*) ${CHGRP} -R ${SVNGROUP} ${SVNREPOS}/db/$$i; \
${CHMOD} -R g+w ${SVNREPOS}/db/$$i; \
;; \
esac; \
done
.endif
.endif
post-deinstall:
.if defined(WITH_MOD_DAV_SVN)
@PKG_PREFIX=${PREFIX} ${SH} ${PKGDEINSTALL} ${PKGNAME} POST-DEINSTALL
.endif
.include <bsd.port.post.mk>
