6 files changed, 38 insertions, 59 deletions

diff --git a/emulators/mtools/Makefile b/emulators/mtools/Makefile
index 8d4dfaf52765..cf23f0b27669 100644
--- a/emulators/mtools/Makefile
+++ b/emulators/mtools/Makefile
@@ -3,24 +3,28 @@
 # Date created:         5 October 1994
 # Whom:                 jmz
 #
-# $Id: Makefile,v 1.19 1998/01/21 08:57:15 obrien Exp $
+# $Id: Makefile,v 1.20 1998/05/07 01:59:22 vanilla Exp $
 #
 
 DISTNAME=	mtools-3.9
 CATEGORIES=	emulators
 MASTER_SITES=	ftp://linux.wauug.org/pub/knaff/mtools/
 
+PATCH_SITES=	${MASTER_SITES}
+PATCHFILES=	mtools-3.9-0305.diff.gz 
+
 MAINTAINER=	jmz@FreeBSD.org
 
+PATCH_DIST_STRIP=	-p1
 HAS_CONFIGURE=		yes
 CONFIGURE_ARGS=		--enable-xdf --prefix=${PREFIX}
 
 USE_GMAKE=	yes
 
 MAN1=		mattrib.1 mbadblocks.1 mcd.1 mcopy.1 mdel.1 mdeltree.1 \
-		mdir.1 mdu.1 mformat.1 mkmanifest.1 mlabel.1 mmd.1 mmount.1 mmove.1 \
-		mrd.1 mread.1 mren.1 mshowfat.1 mtoolstest.1 mtools.1 mtype.1 \
-		mzip.1 mpartition.1
+		mdir.1 mdu.1 mformat.1 mkmanifest.1 mlabel.1 mmd.1 mmount.1 \
+		mmove.1 mpartition.1 mrd.1 mread.1 mren.1 mshowfat.1 \
+		mtoolstest.1 mtools.1 mtype.1 mzip.1
 MAN5=		mtools.5
 
 post-patch:
@@ -33,7 +37,11 @@ post-patch:
 	 done
 
 post-install:
-	@install -c ${WRKSRC}/mtools.conf ${PREFIX}/etc
+	@#	mwrite has been removed by author, but we'll keep it just a bit longer
+	@ln -sf ${PREFIX}/bin/mtools ${PREFIX}/bin/mwrite
+	@ln -sf ${PREFIX}/man/man1/mcopy.1.gz ${PREFIX}/man/man1/mwrite.1.gz
+	@${INSTALL_DATA} ${WRKSRC}/mtools.conf ${PREFIX}/etc
+	@${ECHO} "Please verify ${PREFIX}/etc/mtools.conf for your machine."
 	@if [ ! -f ${PREFIX}/info/dir ]; then \
 	  ${SED} -ne '1,/Menu:/p' /usr/share/info/dir > ${PREFIX}/info/dir; \
 	 fi
diff --git a/emulators/mtools/distinfo b/emulators/mtools/distinfo
index 717c0c2e275d..f66fd723f9e1 100644
--- a/emulators/mtools/distinfo
+++ b/emulators/mtools/distinfo
@@ -1 +1,2 @@
 MD5 (mtools-3.9.tar.gz) = db6ff3db9751a1285f3ce75c9b81f0b8
+MD5 (mtools-3.9-0305.diff.gz) = 5bdc0749c5a8bf0c5d17b41f2d8975b4
diff --git a/emulators/mtools/files/patch-2 b/emulators/mtools/files/patch-2
index 5b9c864466a8..9ba7fe33cf72 100644
--- a/emulators/mtools/files/patch-2
+++ b/emulators/mtools/files/patch-2
@@ -1,14 +1,10 @@
---- mtools.conf.orig	Sun Jan  4 17:29:32 1998
-+++ mtools.conf	Wed May  6 21:56:43 1998
-@@ -1,22 +1,74 @@
+--- mtools.conf.orig	Sun Jan  4 01:29:32 1998
++++ mtools.conf	Thu May  7 01:35:37 1998
+@@ -1,6 +1,74 @@
  # Example mtools.conf files.  Uncomment the lines which correspond to
  # your architecture and comment out the "SAMPLE FILE" line below
 -SAMPLE FILE
-+#SAMPLE FILE
- 
--# # Linux floppy drives
--# drive a: file="/dev/fd0" exclusive
--# drive b: file="/dev/fd1" exclusive
++
 +# A note on permissions:  a user must have read and write permissions for the
 +# devices named here in order to access the DOS file systems.  You might give
 +# ALL USERS access to ALL FLOPPY DISKS via the command
@@ -32,17 +28,11 @@
 +#
 +# The mformat command could also be used to build the DOS file system
 +# in place of mkdosfs.
- 
--# # First SCSI hard disk partition
--# drive c: file="/dev/sda1"
++
++# # FreeBSD floppy drives
 +drive a: file="/dev/rfd0"
 +drive b: file="/dev/rfd1"
- 
--# # First IDE hard disk partition
--# drive c: file="/dev/hda1"
- 
--# # dosemu floppy image
--# drive m: file="/var/lib/dosemu/diskimage"
++
 +# Drive T: is a 1.72M floppy format with 80 cylinders, double sided (2 heads),
 +#          and 43 sectors of size 256 bytes per track.  It uses the same
 +#          floppy disk drive (fd0) as drive A: above.
@@ -54,7 +44,7 @@
 +#
 +# The above note on access permissions applies to /dev/rfd0.1720 as well.
 +drive t: file="/dev/rfd0.1720"
-+ 
++
 +# Drive S: is a 720K floppy format with 80 cylinders, double sided (2 heads),
 +#          and 43 sectors of size 256 bytes per track.  It uses the same
 +#          floppy disk drive (fd0) as drive A: above.
@@ -65,7 +55,7 @@
 +#   [3] then use mcopy/mdir etc. in the usual way.
 +#
 +drive s: file="/dev/rfd0.720"
-+ 
++
 +# SCSI hard disks
 +#  first disk (sd0) slice 1 (s1)
 +#drive c: file="/dev/rsd0s1"
@@ -79,40 +69,15 @@
 +#drive d: file="/dev/rwd1s1"
 +#  first disk on the second IDE interface (wd2) slice 1 (s1)
 +drive d: file="/dev/rwd2s1"
- 
--# # dosemu hdimage
--# drive n: file="/var/lib/dosemu/diskimage" offset=3840
++
 +# PCEMU floppy boot image
 +drive p: file="/usr/local/lib/pcemu/DriveA"
++
  
- # # Atari ramdisk image
- # drive o: file="/tmp/atari_rd" offset=136
-@@ -37,28 +89,11 @@
- #          A/UX target 5 on 1st scsi bus   jaz or zip
- # drive X: file="/dev/rdsk/c105d0s31"      partition=4
+ # # Linux floppy drives
+ # drive a: file="/dev/fd0" exclusive
+@@ -61,4 +129,4 @@
  
--
- # Some examples for BeOS.
- # floppy drive. hardcoded in devices.c, so no real need to define it here
- #drive a: file="/dev/floppy_disk" exclusive
- # ZIP drive on SCSI ID 6
- #drive z: file="/dev/scsi_disk_060" offset=16384 fat_bits=16                        
--
--# SCO Unix 3.2v4
--# # Floppy disk drives
--#
--# drive a: file="/dev/install" exclusive
--# drive b: file="/dev/install1" exclusive
--#  
--# # SCSI hard disk partitions
--#  
--# drive c: file="/dev/dsk/0sC"
--# drive d: file="/dev/dsk/0sD"
--# drive e: file="/dev/dsk/0sE"
--# drive f: file="/dev/dsk/0sF"
--# drive g: file="/dev/dsk/0sG"
--# drive h: file="/dev/dsk/0sH"
--
  # # uncomment the following line to display all file names in lower
  # # case by default
 -# mtools_lower_case=1
diff --git a/emulators/mtools/files/patch-a b/emulators/mtools/files/patch-a
index d34f8800fff5..a6ee9294aa94 100644
--- a/emulators/mtools/files/patch-a
+++ b/emulators/mtools/files/patch-a
@@ -1,5 +1,5 @@
---- Makefile.in.orig	Wed May  6 21:57:14 1998
-+++ Makefile.in	Wed May  6 21:59:13 1998
+--- Makefile.in.orig	Thu May  7 02:49:14 1998
++++ Makefile.in	Thu May  7 02:49:48 1998
 @@ -102,7 +102,7 @@
  xdf_io.c mkmanifest.c
  
@@ -14,13 +14,13 @@
  	@$(top_srcdir)/mkinstalldirs $(bindir)
  	@for j in $(SCRIPTS) ; do \
 -		$(INSTALL_PROGRAM) $(srcdir)/scripts/$$j $(bindir)/$$j ; \
-+		install -o bin -g bin -m 755 $(srcdir)/scripts/$$j $(bindir)/$$j ; \
++ 		$(BSD_INSTALL_SCRIPT) $(srcdir)/scripts/$$j $(bindir)/$$j ; \
  		echo $(bindir)/$$j ; \
  	done
 -	rm -f $(bindir)/lz
 -	$(LN_S) uz $(bindir)/lz
-+#	rm -f $(bindir)/lz
-+#	$(LN_S) uz $(bindir)/lz
++	#rm -f $(bindir)/lz
++	#$(LN_S) uz $(bindir)/lz
  
  install-man:
  	@$(top_srcdir)/mkinstalldirs $(MAN1DIR)
diff --git a/emulators/mtools/pkg-descr b/emulators/mtools/pkg-descr
index f5a5c37d9a1a..09e854a3f2ce 100644
--- a/emulators/mtools/pkg-descr
+++ b/emulators/mtools/pkg-descr
@@ -20,6 +20,7 @@ mrd             RD/RMDIR        remove an MSDOS subdirectory
 mread           COPY            low level read (copy) an MSDOS file to Unix
 mren            REN/RENAME      rename an existing MSDOS file
 mtype           TYPE            display contents of an MSDOS file
+mwrite          COPY            alias for mcopy, will be removed soon
 
 You should be able to just close your eyes and pretend you're on an MSDOS
 system.  Everything should work the same... except for the added 'm' at
diff --git a/emulators/mtools/pkg-plist b/emulators/mtools/pkg-plist
index 0c6bc187225e..f562c6961638 100644
--- a/emulators/mtools/pkg-plist
+++ b/emulators/mtools/pkg-plist
@@ -20,6 +20,7 @@ bin/mtools
 @exec ln -fs %D/%F %B/mshowfat
 @exec ln -fs %D/%F %B/mtoolstest
 @exec ln -fs %D/%F %B/mtype
+@exec ln -fs %D/%F %B/mwrite
 @exec ln -fs %D/%F %B/mzip
 @unexec rm %B/mattrib
 @unexec rm %B/mbadblocks
@@ -42,6 +43,7 @@ bin/mtools
 @unexec rm %B/mshowfat
 @unexec rm %B/mtoolstest
 @unexec rm %B/mtype
+@unexec rm %B/mwrite
 @unexec rm %B/mzip
 bin/mcheck
 bin/mcomp
@@ -56,6 +58,8 @@ man/man1/mattrib.1.gz
 man/man1/mbadblocks.1.gz
 man/man1/mcd.1.gz
 man/man1/mcopy.1.gz
+@exec ln -fs %D/%F %B/mwrite.1.gz
+@unexec rm %B/mwrite.1.gz
 man/man1/mdel.1.gz
 man/man1/mdeltree.1.gz
 man/man1/mdir.1.gz