New port mctoolame-encoder version 0.1.a: A LayerII MPEG Audio

encoder which supports multi-channel encoding

4 files changed, 97 insertions, 0 deletions

diff --git a/audio/mctoolame-encoder/Makefile b/audio/mctoolame-encoder/Makefile
new file mode 100644
index 000000000000..49659ae7a994
--- /dev/null
+++ b/audio/mctoolame-encoder/Makefile
@@ -0,0 +1,66 @@
+# New ports collection makefile for:	mctooLAME encoder
+# Date created:		Thu Mar 27 20:32:42 UTC 2003
+# Whom:                 Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	mctoolame
+PORTVERSION=	0.1.a
+CATEGORIES=	audio
+MASTER_SITES=	${MASTER_SITE_SOURCEFORGE}
+MASTER_SITE_SUBDIR=	${PORTNAME}
+PKGNAMESUFFIX=	-encoder
+DISTNAME=	${PORTNAME}-${PORTVERSION:C/\.//g}
+EXTRACT_SUFX=	.tgz
+
+MAINTAINER=	lioux@FreeBSD.org
+COMMENT=	A LayerII MPEG Audio encoder which supports multi-channel encoding
+
+USE_GMAKE=	yes
+USE_REINPLACE=	yes
+ALL_TARGET=
+PLIST_SUB=	PKGNAMESUFFIX="${PKGNAMESUFFIX}"
+
+pre-everything::
+.ifndef(WITH_OPTIMIZED_CFLAGS)
+	@${ECHO_MSG} '>>>'
+	@${ECHO_MSG} '>>> You can enable extra optimizations by defining WITH_OPTIMIZED_CFLAGS'
+	@${ECHO_MSG} ">>> For example, 'make WITH_OPTIMIZED_CFLAGS=yes'"
+.endif
+	@${ECHO_MSG} '>>>'
+.ifndef(WITH_PROFILED)
+	@${ECHO_MSG} ">>> You can enable profiling by defining WITH_PROFILED"
+.endif
+
+.include <bsd.port.pre.mk>
+
+post-patch:
+.ifndef(WITH_OPTIMIZED_CFLAGS)
+	@${REINPLACE_CMD} -E \
+		-e 's|\$$\(TWEAKS\)||' \
+		${WRKSRC}/Makefile
+.endif
+.ifndef(WITH_PROFILED)
+	@${REINPLACE_CMD} -E \
+		-e 's|\$$\(PG\)||' \
+		${WRKSRC}/Makefile
+.endif
+	@${REINPLACE_CMD} -E \
+		-e 's@\$$\((ARCH|OPTIM|WARNINGS)\)@@g' \
+		${WRKSRC}/Makefile
+
+post-configure:
+# C{C,FLAGS} safeness
+	@${REINPLACE_CMD} -E \
+		-e 's|^(CC[[:space:]]*=).+$$|\1${CC} ${CFLAGS}|' \
+		${WRKSRC}/Makefile
+
+do-install:
+.ifndef(NOPORTDOCS)
+	@${MKDIR} ${DOCSDIR}${PKGNAMESUFFIX}/html
+	@${INSTALL_DATA} ${WRKSRC}/html/* ${DOCSDIR}${PKGNAMESUFFIX}/html
+.endif
+	@${INSTALL_PROGRAM} ${WRKSRC}/mctoolame ${PREFIX}/bin
+
+.include <bsd.port.post.mk>
diff --git a/audio/mctoolame-encoder/distinfo b/audio/mctoolame-encoder/distinfo
new file mode 100644
index 000000000000..d40b2567630e
--- /dev/null
+++ b/audio/mctoolame-encoder/distinfo
@@ -0,0 +1 @@
+MD5 (mctoolame-01a.tgz) = 17d136b6e0fb021fe8e409dc2f8e52f2
diff --git a/audio/mctoolame-encoder/pkg-descr b/audio/mctoolame-encoder/pkg-descr
new file mode 100644
index 000000000000..b6e48678aab1
--- /dev/null
+++ b/audio/mctoolame-encoder/pkg-descr
@@ -0,0 +1,24 @@
+[ excerpt from developer's WWW site ]
+
+A multi-channel MPEG encoder, using the ISO13818 standard and the
+dist10 source code. Multi-channel files may have up to 6 defined
+channels: Left(L), Right(R), Center(C), Left Surround (LS), Right
+Surround (RS) and a Low Frequency Enhancement channel (LFE).
+
+ISO13818 defines 5 multichannel modes (on top of the normal stereo
+mode), each of these modes may have an optional LFE channel:
+
+3/2: L, R, C, LS, RS 
+3/1: L, R, C, mono surround 
+2/2: L, R, LS, RS 
+2/1: L, R, mono surround 
+3/0: L, R, C 
+
+The "standard" surround sound encoding of "5.1 channels" is achieved
+by using mode 3/2 plus an LFE channel.
+
+A multi-channel MPEG file should decode OK on any MPEG decoder. If
+the decoder doesn't recognize the multi-channel extensions, then
+you'll just get a stereo file containing a down mix of the 5 channels.
+
+WWW: http://www.planckenergy.com/
diff --git a/audio/mctoolame-encoder/pkg-plist b/audio/mctoolame-encoder/pkg-plist
new file mode 100644
index 000000000000..5b8c5bffb11b
--- /dev/null
+++ b/audio/mctoolame-encoder/pkg-plist
@@ -0,0 +1,6 @@
+bin/mctoolame
+%%PORTDOCS%%%%DOCSDIR%%%%PKGNAMESUFFIX%%/html/default.html
+%%PORTDOCS%%%%DOCSDIR%%%%PKGNAMESUFFIX%%/html/history.html
+%%PORTDOCS%%%%DOCSDIR%%%%PKGNAMESUFFIX%%/html/readme.html
+%%PORTDOCS%%@dirrm %%DOCSDIR%%%%PKGNAMESUFFIX%%/html
+%%PORTDOCS%%@dirrm %%DOCSDIR%%%%PKGNAMESUFFIX%%