Fix bug reported by bugzilla

"Bug 243220: comms/fldigi: build fail, probably on HAMLIB=off  "
with update to formal new release.

This is the first update release in 6 months and contains many bug
fixes, performance enhancements, non-English text translations, and new
capabilities. Please review the fldigi.txt, reprinted below.

------------------------------------------------------------------------

                            Version 4.1.09
                                                  Thu Jan 10 18:00:00 2020

config-dialog-mod
   * Modify config dialog creation to insure that locale translations apply
     to table entries

MilliSleep
   * Change MINGW MilliSleep implementation to use nanosleep

PO updates
   * Update po submissions from translation authors
   * Change Italian translator to Emanuale Repetto, IZ1UKX

Alert/Rx-monitor playback
   * fix playback distortion on Pi3 internal sound card
     - sound OK on Cmedia thumb audio device
     - sound chopped/distorted on internal sound card
     - improved efficiency of portaudio callback function
     - increased sound data blocks to 1024 frames each frame 2 float values;
       right/left channel
   * Add alert stream volume control
   * Remove filter transients from rx audio stream
   * Update Alert configuration tab
   * Detect if use does not connect to audio alert device

New Install
   * restore Data Source dialog tab to new install wizard
   * fix missing cell element that caused table to not redraw correctly after
     table resize or column resize

Audio alerts disable
   * add enable/disable button to Audio Alerts playback device selection
     - opening a portaudio stream on unavailable device
     - caused segmentation fault
     - open stream now properly handled
     - default is disabled
   * fix seg fault bug on "new" install Wizard if audio alerts activated

cw mods
   * change timing parameter ranges
   * change CW sample rate to 16000
   * change waterfall drop rate computation
     - drop rate independent of mode samplerate
   * simplified CW AFCW generation code
   * add CW keyline on DTR/RTS
   * correct Farnsworth timing
   * insure that initial state of DTR is disabled
   * CW TUNE using DTR / RTS pins

Winkeyer
   * correct WK_online status detection

Analysis mode
   * change displayed tracking frequency to .001 precision

hamcall
   * fix to broken hamcall lookups

RSID code assignments
   * Assigned secondary Rsid Codes:
     - DominoEX Micro: 691
     - ThorEX : 693

ARRL CW bulletins
   * changes to CW modem and macro language to support bulleting transmissions by W1AW
   * add new transmit interval macro
       <!SKED:HHMMSS:YYYYMMDD> to provide segmented scheduling
     of transmission at exact date/time.
   * change right channel QSK/PTT signal to square wav
     - user configurable base frequency
   * correct Farnsworth timing
   * add timing compensation for more accurate WPM timing
   * modified to work with 1.2.0 nanoIO sketch

lotw mangled report files
   * tqsl trace file occassionally mangled when read by fldigi function
     check_lotw_log.  delay reading file until no change in trace file size
     occurs with a 100 msec window
   * improved lotw message box contents based on lotw trace file contents
   * increase time-out delays waiting for tqsl trace file completion

tree metaphor
   * change configuration dialog to use tree vice tab metaphor
   * update user documentation

OS X Bus 10 error
   * Bug fix on OS X.

Log ADIF export
   * Add fields to "all" export

xmlrpc_rig
   * increase timeout to 5 seconds

Display Logbook Datum
   * re-enable control of displaying logbook datum when starting program

Rx monitor
   * add monitor audio stream to allow user to listen to unprocessed Rx audio stream
   * add Rx audio stream filter
   * create separate Rx Audio dialog
     - open on View menu pull down

Combo Box behavior
   * add scrollwheel action to combo/list box behavior
   * add widget Fl_Group::do_callback() to event handler
   * correct FreqControl handler for scrollwheel

cw prosigns
   * allow user to select cw prosign display
     - long view, <SK> <BT> ...
     - short view, as prosign short cut key defined on the CW prosign config' tab

RTTY bell
   * enable BELL, visual and audible for TTY decoder
   * pass BELL, \a, and CR, \r to xml rx data stream
   * add RTTY bell waveform file
   * add user configuration controls to disable BELL annunciation
       * fixed Windows alert failure
       * added ctrl-shift-g to special character group to insert
         the <BEL>, 0x07 character into the transmit text
         - hold control and shift down and press g multiple times
           for a string of <BEL> insertions
       * clean up trailing edge of phone ring
       * implement separate thread for handling mp3 and wav
         file playback.
         - removes dr_mp processing from main thread
         - prevents main thread locking during mp3/wav file
           processing

MinGW mods
   * changes imposed by changes to gcc and mxe components
   * modifications to accommodate changes in mingw libraries and headers

CW International Chars

mp3
   * Add mp3 decoder for mp3 files
     - uses public domain decoder drmp3
     - Audio playback, and
     - Alerts

macros
   * Allow CWID execution at specified position in macro text
   * Modify macro tag <TIMER:nnn> to always start when state changes from Tx to Rx.
   * Add <# comments> tag.  Works same as <COMMENT:comments> tag
   * Correct coding for proper operation of <SKED:..., <TIMER:...
     and <REPEAT...> tags.
   * Implement <UNTIL:hhmm[ss]:[YYYYMMDD]> macro tag
     - halts macro at specified date/time when either <REPEAT>,
       or <TIMER:nn> are specified in the macro text.

Xmt Audio file
   * Add ability to transmit an audio file using new macro tag: <AUDIO:path-filename>
     - macro editor opens an OS select file dialog
       when the tag is selected from the pick list suggested use:
         <MODEM:NULL><TX>
         <AUDIO:path-filename-1>
         <AUDIO:path-filename-2>
         <RX><@MODEM:BPSK31>
       or modem type of choice
   * Audio file must be wav format, either mono or stereo any sample rate
   * Returning to Rx stops current and any pending audio playback.  Post Tx
     macro tags are then executed.  T/R button or Escape key will abort the playback.
   * Please use responsibly - know and understand your license limitations for
     transmitting audio files, especially music and/or copyrighted material.

Alerts
   * Correct test for no output device
     - do not use pa error handler
   * Add ability to select the pa device for alerts output
     - was using default device
     - detect device default sample rate
     - convert all sound files to def sr using fastest sinc converter
   * Change output to use pa callbacks

Data file update
   * Update/correction to file NAVTEX_stations.csv
     - contributed by N2RY

flrig freq/mode
   * Change order of sending frequency and mode to mode then frequency

Fltk 1.4.x
   * Change to startup resize on MacOS built against fltk-1.4.x

Wefax autosave
   * Change max lines to counter min=1000, max = 1000

Update check
   * correct logic for update checking

WEFAX AFC
   * Fix wefax AFC computation / application
     - incorrect computation of center frequency
   * Disallow audio stream playback on WEFAX
     - not compatible with HAMFAX class decoder
   * Remove status display messages
     - state changes still logged to event log
   * Force ".png" file extension on saved images
   * wefax code cleanup

------------------------------------------------------------------------

PR:		ports/243220
Submitted by:	bugzilla

2 files changed, 5 insertions, 5 deletions

diff --git a/comms/fldigi/Makefile b/comms/fldigi/Makefile
index a2d1e7d4b1b8..b81109958d22 100644
--- a/comms/fldigi/Makefile
+++ b/comms/fldigi/Makefile
@@ -1,9 +1,9 @@
 # $FreeBSD$
 
 PORTNAME=	fldigi
-PORTVERSION=	4.1.08.51
+PORTVERSION=	4.1.09
 CATEGORIES=	comms hamradio
-MASTER_SITES=	SF/${PORTNAME}/alpha_tests
+MASTER_SITES=	SF/${PORTNAME}/${PORTNAME}
 
 MAINTAINER=	hamradio@FreeBSD.org
 COMMENT=	Digital decoder for psk, cw, psk31, olivia
diff --git a/comms/fldigi/distinfo b/comms/fldigi/distinfo
index 9c9c0e73801b..2c7c1007345b 100644
--- a/comms/fldigi/distinfo
+++ b/comms/fldigi/distinfo
@@ -1,3 +1,3 @@
-TIMESTAMP = 1578070233
-SHA256 (fldigi-4.1.08.51.tar.gz) = 9a3984b8bbd8b3db0c87b43b12a55df595341498e3b7d1589733239c424b7172
-SIZE (fldigi-4.1.08.51.tar.gz) = 4697169
+TIMESTAMP = 1578794762
+SHA256 (fldigi-4.1.09.tar.gz) = 9753ef1377d395abaf462e1a51ed5665b192bb5bfa14608ee4067ba12caabcdd
+SIZE (fldigi-4.1.09.tar.gz) = 4778091