1 files changed, 0 insertions, 175 deletions

diff --git a/databases/rubygem-rubyrep/files/rubyrep.in b/databases/rubygem-rubyrep/files/rubyrep.in
deleted file mode 100644
index e770745ced26..000000000000
--- a/databases/rubygem-rubyrep/files/rubyrep.in
+++ /dev/null
@@ -1,175 +0,0 @@
-#!/bin/sh
-
-# PROVIDE: rubyrep
-# REQUIRE: NETWORKING SERVERS
-# KEYWORD: shutdown
-
-# Add the following line to /etc/rc.conf to enable `rubyrep':
-#rubyrep_enable="YES"
-# and be sure to configure (at least)
-# %%PREFIX%%/etc/rubyrep/rubyrep.conf
-#
-# To replicate more than one database, change
-#rubyrep_multi="NO"
-# to "YES". A rubyrep process will be started for each file with
-# .conf suffix in $rubyrep_config_dir.
-#
-# Additional options:
-#
-#rubyrep_stdout_log="/var/log/rubyrep.fifo"
-#rubyrep_stderr_log="/var/log/rubyrep_err.fifo"
-#rubyrep_fifo_logs="YES"
-# Specify log files for stdout and stderr. Defaults to using fifos;
-# actual log file will have the extension .log. Additional PID files 
-# will be created for each of the processes used to tap the fifos; 
-# these can be used in newsyslog.conf(5) to automate log rotation.
-#
-#rubyrep_config="%%PREFIX%%/etc/rubyrep.conf"
-# Specify full path to default rubyrep configuration file.
-# NOTE: Ignored if $rubyrep_multi is set to "YES"!
-#
-#rubyrep_config_dir="%%PREFIX%%/etc/rubyrep"
-# Specify directory containing config files for rubyrep. Used
-# by $rubyrep_multi, ignored if $rubyrep_multi="NO" (the default).
-#
-#rubyrep_command="replicate"
-# Specify the command to pass to rubyrep. Usually you'll want to
-# replicate (the default), but it is also possible to specify "proxy",
-# "scan" or "sync". Note: This option applies to all databases if
-# $rubyrep_multi="YES"!
-#
-#rubyrep_command_flags=""
-# Specify options to pass to the $rubyrep_command above. For other
-# operating modes than "replicate" this may be necessary, especially
-# if you want useful log output! Run
-#   %%prefix%%/bin/rubyrep <command> --help
-# for further information.
-
-rubyrep_enable="${rubyrep_enable:-"NO"}"
-rubyrep_multi="${rubyrep_multi:-"NO"}"
-rubyrep_command="${rubyrep_command:-"replicate"}"
-rubyrep_command_flags="${rubyrep_command_flags:-""}"
-rubyrep_config="${rubyrep_config:-"%%PREFIX%%/etc/rubyrep.conf"}"
-rubyrep_config_dir="${rubyrep_config_dir:-"%%PREFIX%%/etc/rubyrep"}"
-rubyrep_user="${rubyrep_user:-"daemon"}"
-rubyrep_stdout_log="${rubyrep_stdout_log:-"/var/log/rubyrep.fifo"}"
-rubyrep_stderr_log="${rubyrep_stderr_log:-"/var/log/rubyrep_err.fifo"}"
-rubyrep_fifo_logs="YES"
-
-. /etc/rc.subr
-
-checkfifo() {
-        # Check and create if necessary fifo special files for logging
-        for f in $stdout_log $stderr_log ; do
-                flog_fifo=$f
-                if [ ! -p "$flog_fifo" ] ; then
-                        mkfifo $flog_fifo ; chown ${rubyrep_user} $flog_fifo
-                fi
-        done
-}
-
-pid_touch () {
-        touch $pidfile
-        chown $rubyrep_user $pidfile
-}
-
-rubyrep_prestart() {
-        pid_touch
-	if [ "$rubyrep_fifo_logs"="YES" ] ; then
-	        umask 027
-		checkfifo
-	        for f in $stdout_log $stderr_log ; do
-	                flog_fifo=$f
-	                flog_args=" -t "
-	                if [ "$cfgname" ] ; then
-				local out_log="`dirname $f`/`basename -s .fifo.$cfgname $flog_fifo`.$cfgname.log"
-				local out_pid="/var/run/`basename -s .fifo.$cfgname $flog_fifo`.$cfgname.flog.pid"
-			else
-				local out_log="`dirname $f`/`basename -s .fifo $flog_fifo`.log"
-				local out_pid="/var/run/`basename -s .fifo $flog_fifo`.flog.pid"
-			fi
-
-	                echo "Enabling logging for $flog_fifo ($out_log, $out_pid)..."
-	                echo "%%PREFIX%%/bin/flog $flog_args $out_log < $flog_fifo &"
-	                %%PREFIX%%/bin/flog $flog_args $out_log < $flog_fifo &
-	                echo $! > $out_pid
-	        done
-	fi
-}
-
-rubyrep_stop() {
-	if [ -f "$pidfile" ] ; then
-		kill -9 `cat $pidfile`
-		rm $pidfile
-	else
-		echo "PID file not found ($pidfile)"
-	fi
-}
-
-rubyrep_poststop() {
-	if [ "$rubyrep_fifo_logs"="YES" ] ; then
-	        for f in $stdout_log $stderr_log ; do
-	                flog_fifo=$f
-	                if [ "$cfgname" ] ; then
-				local out_pid="/var/run/`basename -s .fifo.$cfgname $flog_fifo`.$cfgname.flog.pid"
-			else
-				local out_pid="/var/run/`basename -s .fifo $flog_fifo`.flog.pid"
-			fi
-	                kill $out_pid >/dev/null 2>/dev/null
-	                rm $out_pid >/dev/null 2>/dev/null
-	        done
-	fi
-}
-
-rubyrep_init() {
-	if [ "$rubyrep_multi" = "NO" ] ; then
-		cmdline="%%PREFIX%%/bin/rubyrep generate $rubyrep_config"
-		if [ "$1" = "init" -a -f "$rubyrep_config" ] ; then
-			echo "Skipping file $rubyrep_config (already exists)."
-		else
-			echo "Generating template file $rubyrep_config"
-			$cmdline
-		fi
-	else
-		echo 'Command not available when $rubyrep_multi="YES"'.
-		exit
-	fi
-}
-
-name="rubyrep"
-rcvar=rubyrep_enable
-
-# read configuration and set defaults
-load_rc_config $name
-
-extra_commands="init"
-init_cmd="${name}_init"
-
-command="/usr/sbin/daemon"
-start_precmd="${name}_prestart"
-stop_cmd="${name}_stop"
-stop_postcmd="${name}_poststop"
-rubyrep_command_flags="$rubyrep_command_flags"
-
-if [ "$rubyrep_multi" = "NO" ] ; then
-	stdout_log=${rubyrep_stdout_log}
-	stderr_log=${rubyrep_stderr_log}
-	log_args=">> ${stdout_log} 2>> ${stderr_log} "
-	cmdline="%%PREFIX%%/bin/rubyrep $rubyrep_command $rubyrep_command_flags -c $rubyrep_config"
-	pidfile="/var/run/$name.pid"
-	flags="-p ${pidfile} ${cmdline} ${log_args}"
-	run_rc_command "$1"
-elif [ "$rubyrep_multi" = "YES" ] ; then
-	[ ! -d "$rubyrep_config_dir" ] && mkdir -p "$rubyrep_config_dir"
-	for i in `ls $rubyrep_config_dir/*.conf` ; do
-		rubyrep_config=$i
-		cfgname=$(basename -s .conf $i)
-		stdout_log=${rubyrep_stdout_log}.$cfgname
-		stderr_log=${rubyrep_stderr_log}.$cfgname
-		log_args=">> ${stdout_log} 2>> ${stderr_log} "
-		cmdline="%%PREFIX%%/bin/rubyrep $rubyrep_command $rubyrep_command_flags -c $rubyrep_config"
-		pidfile="/var/run/${name}_${cfgname}.pid"
-		flags="-p ${pidfile} ${cmdline} ${log_args}"
-		run_rc_command "$1"
-	done
-fi