8 files changed, 319 insertions, 453 deletions

diff --git a/devel/avr-gcc/Makefile b/devel/avr-gcc/Makefile
index 74114979cda0..0b5a174d7d50 100644
--- a/devel/avr-gcc/Makefile
+++ b/devel/avr-gcc/Makefile
@@ -6,8 +6,7 @@
 #
 
 PORTNAME=	gcc
-PORTVERSION=	3.4.3
-PORTREVISION=	1
+PORTVERSION=	3.4.4
 CATEGORIES=	devel
 MASTER_SITES=	${MASTER_SITE_GCC}
 MASTER_SITES+=	http://people.freebsd.org/~joerg/:local
diff --git a/devel/avr-gcc/distinfo b/devel/avr-gcc/distinfo
index b9b6849423ed..46c2109e02d2 100644
--- a/devel/avr-gcc/distinfo
+++ b/devel/avr-gcc/distinfo
@@ -1,4 +1,4 @@
-MD5 (gcc-core-3.4.3.tar.bz2) = d2cbfe8fc3205c1d7969b26377405778
-SIZE (gcc-core-3.4.3.tar.bz2) = 13040222
-MD5 (gcc-g++-3.4.3.tar.bz2) = 26cb84db92feb8e03bb7bf3bc264844f
-SIZE (gcc-g++-3.4.3.tar.bz2) = 2475405
+MD5 (gcc-core-3.4.4.tar.bz2) = 9dd911fd9bc136ca42b73c68735d853b
+SIZE (gcc-core-3.4.4.tar.bz2) = 13153342
+MD5 (gcc-g++-3.4.4.tar.bz2) = a828b7024f07cebc3bc1e55dbfd4706a
+SIZE (gcc-g++-3.4.4.tar.bz2) = 2474402
diff --git a/devel/avr-gcc/files/patch-16bitassign b/devel/avr-gcc/files/patch-16bitassign
deleted file mode 100644
index d527a87cf935..000000000000
--- a/devel/avr-gcc/files/patch-16bitassign
+++ /dev/null
@@ -1,215 +0,0 @@
-===================================================================
-RCS file: /cvsroot/gcc/cvsroot/gcc/gcc/gcc/config/avr/avr.c,v
-retrieving revision 1.129
-retrieving revision 1.130
-diff -u -r1.129 -r1.130
---- gcc/config/avr/avr.c	2005/02/09 14:43:28	1.129
-+++ gcc/config/avr/avr.c	2005/03/06 21:50:34	1.130
-@@ -1120,6 +1120,16 @@
- 
- 	  print_operand (file, XEXP (addr, 1), 0);
- 	}
-+      else if (code == 'p' || code == 'r')
-+        {
-+          if (GET_CODE (addr) != POST_INC && GET_CODE (addr) != PRE_DEC)
-+            fatal_insn ("bad address, not post_inc or pre_dec:", addr);
-+          
-+          if (code == 'p')
-+            print_operand_address (file, XEXP (addr, 0));  /* X, Y, Z */
-+          else
-+            print_operand (file, XEXP (addr, 0), 0);  /* r26, r28, r30 */
-+        }
-       else if (GET_CODE (addr) == PLUS)
- 	{
- 	  print_operand_address (file, XEXP (addr,0));
-@@ -1835,6 +1845,9 @@
-   rtx base = XEXP (src, 0);
-   int reg_dest = true_regnum (dest);
-   int reg_base = true_regnum (base);
-+  /* "volatile" forces reading low byte first, even if less efficient,
-+     for correct operation with 16-bit I/O registers.  */
-+  int mem_volatile_p = MEM_VOLATILE_P (src);
-   int tmp;
- 
-   if (!l)
-@@ -1928,6 +1941,25 @@
-       if (reg_overlap_mentioned_p (dest, XEXP (base, 0)))
- 	fatal_insn ("incorrect insn:", insn);
- 
-+      if (mem_volatile_p)
-+        {
-+          if (REGNO (XEXP (base, 0)) == REG_X)
-+            {
-+              *l = 4;
-+              return (AS2 (sbiw,r26,2)  CR_TAB
-+                      AS2 (ld,%A0,X+)   CR_TAB
-+                      AS2 (ld,%B0,X)    CR_TAB
-+                      AS2 (sbiw,r26,1));
-+            }
-+          else
-+            {
-+              *l = 3;
-+              return (AS2 (sbiw,%r1,2)   CR_TAB
-+                      AS2 (ld,%A0,%p1)  CR_TAB
-+                      AS2 (ldd,%B0,%p1+1));
-+            }
-+        }
-+
-       *l = 2;
-       return (AS2 (ld,%B0,%1) CR_TAB
- 	      AS2 (ld,%A0,%1));
-@@ -2508,7 +2540,11 @@
-   rtx base = XEXP (dest, 0);
-   int reg_base = true_regnum (base);
-   int reg_src = true_regnum (src);
-+  /* "volatile" forces writing high byte first, even if less efficient,
-+     for correct operation with 16-bit I/O registers.  */
-+  int mem_volatile_p = MEM_VOLATILE_P (dest);
-   int tmp;
-+
-   if (!l)
-     l = &tmp;
-   if (CONSTANT_ADDRESS_P (base))
-@@ -2528,33 +2564,33 @@
-         {
-           if (reg_src == REG_X)
-             {
--	      /* "st X+,r26" is undefined */
--              if (reg_unused_after (insn, src))
-+              /* "st X+,r26" and "st -X,r26" are undefined.  */
-+              if (!mem_volatile_p && reg_unused_after (insn, src))
- 		return *l=4, (AS2 (mov,__tmp_reg__,r27) CR_TAB
- 			      AS2 (st,X,r26)            CR_TAB
- 			      AS2 (adiw,r26,1)          CR_TAB
- 			      AS2 (st,X,__tmp_reg__));
-               else
- 		return *l=5, (AS2 (mov,__tmp_reg__,r27) CR_TAB
--			      AS2 (st,X,r26)            CR_TAB
- 			      AS2 (adiw,r26,1)          CR_TAB
- 			      AS2 (st,X,__tmp_reg__)    CR_TAB
--			      AS2 (sbiw,r26,1));
-+                              AS2 (sbiw,r26,1)          CR_TAB
-+                              AS2 (st,X,r26));
-             }
-           else
-             {
--              if (reg_unused_after (insn, base))
-+              if (!mem_volatile_p && reg_unused_after (insn, base))
-                 return *l=2, (AS2 (st,X+,%A1) CR_TAB
-                               AS2 (st,X,%B1));
-               else
--                return *l=3, (AS2 (st  ,X+,%A1) CR_TAB
--                              AS2 (st  ,X,%B1) CR_TAB
--                              AS2 (sbiw,r26,1));
-+                return *l=3, (AS2 (adiw,r26,1) CR_TAB
-+                              AS2 (st,X,%B1)   CR_TAB
-+                              AS2 (st,-X,%A1));
-             }
-         }
-       else
--        return  *l=2, (AS2 (st ,%0,%A1)    CR_TAB
--                       AS2 (std,%0+1,%B1));
-+        return  *l=2, (AS2 (std,%0+1,%B1) CR_TAB
-+                       AS2 (st,%0,%A1));
-     }
-   else if (GET_CODE (base) == PLUS)
-     {
-@@ -2567,14 +2603,14 @@
- 
- 	  if (disp <= 63 + MAX_LD_OFFSET (GET_MODE (dest)))
- 	    return *l = 4, (AS2 (adiw,r28,%o0-62) CR_TAB
--			    AS2 (std,Y+62,%A1)    CR_TAB
- 			    AS2 (std,Y+63,%B1)    CR_TAB
-+			    AS2 (std,Y+62,%A1)    CR_TAB
- 			    AS2 (sbiw,r28,%o0-62));
- 
- 	  return *l = 6, (AS2 (subi,r28,lo8(-%o0)) CR_TAB
- 			  AS2 (sbci,r29,hi8(-%o0)) CR_TAB
--			  AS2 (st,Y,%A1)           CR_TAB
- 			  AS2 (std,Y+1,%B1)        CR_TAB
-+			  AS2 (st,Y,%A1)           CR_TAB
- 			  AS2 (subi,r28,lo8(%o0))  CR_TAB
- 			  AS2 (sbci,r29,hi8(%o0)));
- 	}
-@@ -2582,31 +2618,53 @@
- 	{
- 	  /* (X + d) = R */
- 	  if (reg_src == REG_X)
--	    {
-+            {
- 	      *l = 7;
- 	      return (AS2 (mov,__tmp_reg__,r26)  CR_TAB
- 		      AS2 (mov,__zero_reg__,r27) CR_TAB
--		      AS2 (adiw,r26,%o0)         CR_TAB
--		      AS2 (st,X+,__tmp_reg__)    CR_TAB
-+                      AS2 (adiw,r26,%o0+1)       CR_TAB
- 		      AS2 (st,X,__zero_reg__)    CR_TAB
-+		      AS2 (st,-X,__tmp_reg__)    CR_TAB
- 		      AS1 (clr,__zero_reg__)     CR_TAB
--		      AS2 (sbiw,r26,%o0+1));
-+                      AS2 (sbiw,r26,%o0));
- 	    }
- 	  *l = 4;
--	  return (AS2 (adiw,r26,%o0) CR_TAB
--		  AS2 (st,X+,%A1)    CR_TAB
--		  AS2 (st,X,%B1)     CR_TAB
--		  AS2 (sbiw,r26,%o0+1));
-+          return (AS2 (adiw,r26,%o0+1) CR_TAB
-+                  AS2 (st,X,%B1)       CR_TAB
-+                  AS2 (st,-X,%A1)      CR_TAB
-+                  AS2 (sbiw,r26,%o0));
- 	}
--      return *l=2, (AS2 (std,%A0,%A1)    CR_TAB
--		    AS2 (std,%B0,%B1));
-+      return *l=2, (AS2 (std,%B0,%B1)    CR_TAB
-+                    AS2 (std,%A0,%A1));
-     }
-   else if (GET_CODE (base) == PRE_DEC) /* (--R) */
-     return *l=2, (AS2 (st,%0,%B1) CR_TAB
- 		  AS2 (st,%0,%A1));
-   else if (GET_CODE (base) == POST_INC) /* (R++) */
--    return *l=2, (AS2 (st,%0,%A1)  CR_TAB
--		  AS2 (st,%0,%B1));
-+    {
-+      if (mem_volatile_p)
-+        {
-+          if (REGNO (XEXP (base, 0)) == REG_X)
-+            {
-+              *l = 4;
-+              return (AS2 (adiw,r26,1)  CR_TAB
-+                      AS2 (st,X,%B1)    CR_TAB
-+                      AS2 (st,-X,%A1)   CR_TAB
-+                      AS2 (adiw,r26,2));
-+            }
-+          else
-+            {
-+              *l = 3;
-+              return (AS2 (std,%p0+1,%B1) CR_TAB
-+                      AS2 (st,%p0,%A1)    CR_TAB
-+                      AS2 (adiw,%r0,2));
-+            }
-+        }
-+
-+      *l = 2;
-+      return (AS2 (st,%0,%A1)  CR_TAB
-+            AS2 (st,%0,%B1));
-+    }
-   fatal_insn ("unknown move insn:",insn);
-   return "";
- }
-===================================================================
-RCS file: /cvsroot/gcc/cvsroot/gcc/gcc/gcc/config/avr/avr.md,v
-retrieving revision 1.49
-retrieving revision 1.50
-diff -u -r1.49 -r1.50
---- gcc/config/avr/avr.md	2005/01/27 18:22:25	1.49
-+++ gcc/config/avr/avr.md	2005/03/06 21:50:36	1.50
-@@ -30,6 +30,8 @@
- ;;  j  Branch condition.
- ;;  k  Reverse branch condition.
- ;;  o  Displacement for (mem (plus (reg) (const_int))) operands.
-+;;  p  POST_INC or PRE_DEC address as a pointer (X, Y, Z)
-+;;  r  POST_INC or PRE_DEC address as a register (r26, r28, r30)
- ;;  ~  Output 'r' if not AVR_MEGA.
- 
- ;; UNSPEC usage:
diff --git a/devel/avr-gcc/files/patch-mega08-tinyx13-can128 b/devel/avr-gcc/files/patch-mega08-tinyx13-can128
deleted file mode 100644
index 9719ccb90695..000000000000
--- a/devel/avr-gcc/files/patch-mega08-tinyx13-can128
+++ /dev/null
@@ -1,124 +0,0 @@
---- gcc/config/avr/avr.c.orig	2004-09-27 19:13:55.000000000 -0600
-+++ gcc/config/avr/avr.c	2005-02-01 14:58:40.465250000 -0700
-@@ -175,6 +175,9 @@
-   { "at90c8534", 2, "__AVR_AT90C8534__" },
-   { "at90s8535", 2, "__AVR_AT90S8535__" },
-   { "at86rf401", 2, "__AVR_AT86RF401__" },
-+    /* Classic + MOVW, <= 8K.  */
-+  { "attiny13",   2, "__AVR_ATtiny13__" },
-+  { "attiny2313", 2, "__AVR_ATtiny2313__" },  
-     /* Classic, > 8K.  */
-   { "avr3",      3, NULL },
-   { "atmega103", 3, "__AVR_ATmega103__" },
-@@ -185,6 +188,8 @@
-     /* Enhanced, <= 8K.  */
-   { "avr4",      4, NULL },
-   { "atmega8",   4, "__AVR_ATmega8__" },
-+  { "atmega48",   4, "__AVR_ATmega48__" },
-+  { "atmega88",   4, "__AVR_ATmega88__" },
-   { "atmega8515", 4, "__AVR_ATmega8515__" },
-   { "atmega8535", 4, "__AVR_ATmega8535__" },
-     /* Enhanced, > 8K.  */
-@@ -193,11 +198,13 @@
-   { "atmega161", 5, "__AVR_ATmega161__" },
-   { "atmega162", 5, "__AVR_ATmega162__" },
-   { "atmega163", 5, "__AVR_ATmega163__" },
-+  { "atmega168", 5, "__AVR_ATmega168__" },
-   { "atmega169", 5, "__AVR_ATmega169__" },
-   { "atmega32",  5, "__AVR_ATmega32__" },
-   { "atmega323", 5, "__AVR_ATmega323__" },
-   { "atmega64",  5, "__AVR_ATmega64__" },
-   { "atmega128", 5, "__AVR_ATmega128__" },
-+  { "at90can128", 5, "__AVR_AT90CAN128__" },
-   { "at94k",     5, "__AVR_AT94K__" },
-     /* Assembler only.  */
-   { "avr1",      1, NULL },
-
---- gcc/config/avr/avr.h.orig	2004-03-08 19:59:55.000000000 -0700
-+++ gcc/config/avr/avr.h	2005-02-01 14:58:40.480875000 -0700
-@@ -2351,12 +2351,12 @@
-    Do not define this macro if it does not need to do anything.  */
- 
- #define LINK_SPEC " %{!mmcu*:-m avr2}\
--%{mmcu=at90s1200|mmcu=attiny1*|mmcu=attiny28:-m avr1} \
--%{mmcu=attiny22|mmcu=attiny26|mmcu=at90s2*|mmcu=at90s4*|mmcu=at90s8*|mmcu=at90c8*|mmcu=at86rf401:-m avr2}\
-+%{mmcu=at90s1200|mmcu=attiny11|mmcu=attiny12|mmcu=attiny15|mmcu=attiny28:-m avr1} \
-+%{mmcu=attiny22|mmcu=attiny26|mmcu=at90s2*|mmcu=at90s4*|mmcu=at90s8*|mmcu=at90c8*|mmcu=at86rf401|mmcu=attiny13|mmcu=attiny2313:-m avr2}\
- %{mmcu=atmega103|mmcu=atmega603|mmcu=at43*|mmcu=at76*:-m avr3}\
--%{mmcu=atmega8*:-m avr4}\
--%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64|mmcu=atmega128|mmcu=at94k:-m avr5}\
--%{mmcu=atmega64|mmcu=atmega128|mmcu=atmega162|mmcu=atmega169: -Tdata 0x800100} "
-+%{mmcu=atmega8*|mmcu=atmega48:-m avr4}\
-+%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64|mmcu=atmega128|mmcu=at90can128|mmcu=at94k:-m avr5}\
-+%{mmcu=atmega48|mmcu=atmega88|mmcu=atmega64|mmcu=atmega128|mmcu=at90can128|mmcu=at90can128|mmcu=atmega162|mmcu=atmega168|mmcu=atmega169: -Tdata 0x800100} "
- 
- /* A C string constant that tells the GCC driver program options to
-    pass to the linker.  It can also specify how to translate options
-@@ -2365,7 +2365,7 @@
-    Do not define this macro if it does not need to do anything.  */
- 
- #define LIB_SPEC \
--  "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lc }}}"
-+  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lc }}}}}"
- /* Another C string constant used much like `LINK_SPEC'.  The
-    difference between the two is that `LIB_SPEC' is used at the end
-    of the command given to the linker.
-@@ -2377,7 +2377,7 @@
- /* No libstdc++ for now.  Empty string doesn't work.  */
- 
- #define LIBGCC_SPEC \
--  "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lgcc }}}"
-+  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lgcc }}}}}"
- /* Another C string constant that tells the GCC driver program how
-    and when to place a reference to `libgcc.a' into the linker
-    command line.  This constant is placed both before and after the
-@@ -2421,23 +2421,29 @@
- %{mmcu=at90c8534:crtc8534.o%s} \
- %{mmcu=at90s8535:crts8535.o%s} \
- %{mmcu=at86rf401:crt86401.o%s} \
-+%{mmcu=attiny13:crttn13.o%s} \
-+%{mmcu=attiny2313:crttn2313.o%s} \
- %{mmcu=atmega103|mmcu=avr3:crtm103.o%s} \
- %{mmcu=atmega603:crtm603.o%s} \
- %{mmcu=at43usb320:crt43320.o%s} \
- %{mmcu=at43usb355:crt43355.o%s} \
- %{mmcu=at76c711:crt76711.o%s} \
- %{mmcu=atmega8|mmcu=avr4:crtm8.o%s} \
-+%{mmcu=atmega48:crtm48.o%s} \
-+%{mmcu=atmega88:crtm88.o%s} \
- %{mmcu=atmega8515:crtm8515.o%s} \
- %{mmcu=atmega8535:crtm8535.o%s} \
- %{mmcu=atmega16:crtm16.o%s} \
- %{mmcu=atmega161|mmcu=avr5:crtm161.o%s} \
- %{mmcu=atmega162:crtm162.o%s} \
- %{mmcu=atmega163:crtm163.o%s} \
-+%{mmcu=atmega168:crtm168.o%s} \
- %{mmcu=atmega169:crtm169.o%s} \
- %{mmcu=atmega32:crtm32.o%s} \
- %{mmcu=atmega323:crtm323.o%s} \
- %{mmcu=atmega64:crtm64.o%s} \
- %{mmcu=atmega128:crtm128.o%s} \
-+%{mmcu=at90can128:crtcan128.o%s} \
- %{mmcu=at94k:crtat94k.o%s}"
- 
- #define EXTRA_SPECS {"crt_binutils", CRT_BINUTILS_SPECS},
---- gcc/config/avr/t-avr.orig	2003-02-27 14:45:33.000000000 -0700
-+++ gcc/config/avr/t-avr	2005-02-01 14:58:40.480875000 -0700
-@@ -50,13 +50,14 @@
- 	mmcu?avr3=mmcu?at43usb320 mmcu?avr3=mmcu?at43usb355 \
- 	mmcu?avr3=mmcu?at76c711 \
- 	mmcu?avr4=mmcu?atmega8515 mmcu?avr4=mmcu?atmega8535 \
--	mmcu?avr4=mmcu?atmega8 \
-+	mmcu?avr4=mmcu?atmega8 mmcu?avr4=mmcu?atmega48 \
-+	mmcu?avr4=mmcu?atmega88 \
- 	mmcu?avr5=mmcu?atmega161 mmcu?avr5=mmcu?atmega162 \
- 	mmcu?avr5=mmcu?atmega163 mmcu?avr5=mmcu?atmega169 \
--	mmcu?avr5=mmcu?atmega16 \
-+	mmcu?avr5=mmcu?atmega16 mmcu?avr5=mmcu?atmega168 \
- 	mmcu?avr5=mmcu?atmega323 mmcu?avr5=mmcu?atmega32 \
- 	mmcu?avr5=mmcu?atmega64  mmcu?avr5=mmcu?atmega128 \
--	mmcu?avr5=mmcu?at94k
-+	mmcu?avr5=mmcu?at94k mmcu?avr5=mmcu?at90can128
- 
- MULTILIB_EXCEPTIONS =
- 
diff --git a/devel/avr-gcc/files/patch-mega325x-mega645x b/devel/avr-gcc/files/patch-mega325x-mega645x
deleted file mode 100644
index 16f7b5f27f64..000000000000
--- a/devel/avr-gcc/files/patch-mega325x-mega645x
+++ /dev/null
@@ -1,58 +0,0 @@
-2005-03-04  Eric B. Weddington  <ericw@evcohs.com>
-
-	* gcc/config/avr/avr.c (avr_mcu_types): Add entries for atmega325, 
-	atmega3250, atmega645, atmega6450.
-	* gcc/config/avr/avr.h (LINK_SPEC): Ditto.
-	(CRT_BINUTILS_SPECS): Ditto.
-	* gcc/config/avr/t-avr (MULTILIB_MATCHES): Ditto.
-
---- gcc/config/avr/avr.c.old	2005-02-10 17:36:47.921875000 -0700
-+++ gcc/config/avr/avr.c	2005-03-04 09:35:26.633875000 -0700
-@@ -202,7 +202,11 @@
-   { "atmega169", 5, "__AVR_ATmega169__" },
-   { "atmega32",  5, "__AVR_ATmega32__" },
-   { "atmega323", 5, "__AVR_ATmega323__" },
-+  { "atmega325", 5, "__AVR_ATmega325__" },
-+  { "atmega3250", 5, "__AVR_ATmega3250__" },
-   { "atmega64",  5, "__AVR_ATmega64__" },
-+  { "atmega645", 5, "__AVR_ATmega645__" },
-+  { "atmega6450", 5, "__AVR_ATmega6450__" },
-   { "atmega128", 5, "__AVR_ATmega128__" },
-   { "at90can128", 5, "__AVR_AT90CAN128__" },
-   { "at94k",     5, "__AVR_AT94K__" },
---- gcc/config/avr/avr.h.old	2005-02-10 17:36:48.015625000 -0700
-+++ gcc/config/avr/avr.h	2005-03-04 09:44:23.118250000 -0700
-@@ -2355,8 +2355,8 @@
- %{mmcu=attiny22|mmcu=attiny26|mmcu=at90s2*|mmcu=at90s4*|mmcu=at90s8*|mmcu=at90c8*|mmcu=at86rf401|mmcu=attiny13|mmcu=attiny2313:-m avr2}\
- %{mmcu=atmega103|mmcu=atmega603|mmcu=at43*|mmcu=at76*:-m avr3}\
- %{mmcu=atmega8*|mmcu=atmega48:-m avr4}\
--%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64|mmcu=atmega128|mmcu=at90can128|mmcu=at94k:-m avr5}\
--%{mmcu=atmega48|mmcu=atmega88|mmcu=atmega64|mmcu=atmega128|mmcu=at90can128|mmcu=at90can128|mmcu=atmega162|mmcu=atmega168|mmcu=atmega169: -Tdata 0x800100} "
-+%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64*|mmcu=atmega128|mmcu=at90can128|mmcu=at94k:-m avr5}\
-+%{mmcu=atmega325|mmcu=atmega3250|mmcu=atmega48|mmcu=atmega88|mmcu=atmega64|mmcu=atmega645|mmcu=atmega6450|mmcu=atmega128|mmcu=at90can128|mmcu=at90can128|mmcu=atmega162|mmcu=atmega168|mmcu=atmega169: -Tdata 0x800100} "
- 
- /* A C string constant that tells the GCC driver program options to
-    pass to the linker.  It can also specify how to translate options
-@@ -2441,7 +2441,11 @@
- %{mmcu=atmega169:crtm169.o%s} \
- %{mmcu=atmega32:crtm32.o%s} \
- %{mmcu=atmega323:crtm323.o%s} \
-+%{mmcu=atmega325:crtm325.o%s} \
-+%{mmcu=atmega3250:crtm3250.o%s} \
- %{mmcu=atmega64:crtm64.o%s} \
-+%{mmcu=atmega645:crtm645.o%s} \
-+%{mmcu=atmega6450:crtm6450.o%s} \
- %{mmcu=atmega128:crtm128.o%s} \
- %{mmcu=at90can128:crtcan128.o%s} \
- %{mmcu=at94k:crtat94k.o%s}"
---- gcc/config/avr/t-avr.old	2005-02-10 17:36:48.031250000 -0700
-+++ gcc/config/avr/t-avr	2005-03-04 09:56:43.790125000 -0700
-@@ -56,6 +56,8 @@
- 	mmcu?avr5=mmcu?atmega163 mmcu?avr5=mmcu?atmega169 \
- 	mmcu?avr5=mmcu?atmega16 mmcu?avr5=mmcu?atmega168 \
- 	mmcu?avr5=mmcu?atmega323 mmcu?avr5=mmcu?atmega32 \
-+	mmcu?avr5=mmcu?atmega325 mmcu?avr5=mmcu?atmega3250 \
-+	mmcu?avr5=mmcu?atmega645 mmcu?avr5=mmcu?atmega6450 \
- 	mmcu?avr5=mmcu?atmega64  mmcu?avr5=mmcu?atmega128 \
- 	mmcu?avr5=mmcu?at94k mmcu?avr5=mmcu?at90can128
- 
diff --git a/devel/avr-gcc/files/patch-newdevices b/devel/avr-gcc/files/patch-newdevices
new file mode 100644
index 000000000000..9a62f2e83d3d
--- /dev/null
+++ b/devel/avr-gcc/files/patch-newdevices
@@ -0,0 +1,253 @@
+diff -ur /tmp/gcc-orig/gcc/config/avr/avr.c ./gcc/config/avr/avr.c
+--- /tmp/gcc-orig/gcc/config/avr/avr.c	Sun Mar 20 22:14:28 2005
++++ ./gcc/config/avr/avr.c	Sat Jul 30 23:01:43 2005
+@@ -175,6 +175,12 @@
+   { "at90c8534", 2, "__AVR_AT90C8534__" },
+   { "at90s8535", 2, "__AVR_AT90S8535__" },
+   { "at86rf401", 2, "__AVR_AT86RF401__" },
++    /* Classic + MOVW, <= 8K.  */
++  { "attiny13",   2, "__AVR_ATtiny13__" },
++  { "attiny2313", 2, "__AVR_ATtiny2313__" },  
++  { "attiny25", 2, "__AVR_ATtiny25__" },
++  { "attiny45", 2, "__AVR_ATtiny45__" },
++  { "attiny85", 2, "__AVR_ATtiny85__" },
+     /* Classic, > 8K.  */
+   { "avr3",      3, NULL },
+   { "atmega103", 3, "__AVR_ATmega103__" },
+@@ -185,19 +191,36 @@
+     /* Enhanced, <= 8K.  */
+   { "avr4",      4, NULL },
+   { "atmega8",   4, "__AVR_ATmega8__" },
++  { "atmega48",   4, "__AVR_ATmega48__" },
++  { "atmega88",   4, "__AVR_ATmega88__" },
+   { "atmega8515", 4, "__AVR_ATmega8515__" },
+   { "atmega8535", 4, "__AVR_ATmega8535__" },
++  { "at90pwm2",  4, "__AVR_AT90PWM2__" },
++  { "at90pwm3",  4, "__AVR_AT90PWM3__" },
+     /* Enhanced, > 8K.  */
+   { "avr5",      5, NULL },
+   { "atmega16",  5, "__AVR_ATmega16__" },
+   { "atmega161", 5, "__AVR_ATmega161__" },
+   { "atmega162", 5, "__AVR_ATmega162__" },
+   { "atmega163", 5, "__AVR_ATmega163__" },
++  { "atmega164", 5, "__AVR_ATmega164__" },
++  { "atmega168", 5, "__AVR_ATmega168__" },
+   { "atmega169", 5, "__AVR_ATmega169__" },
+   { "atmega32",  5, "__AVR_ATmega32__" },
+   { "atmega323", 5, "__AVR_ATmega323__" },
++  { "atmega324", 5, "__AVR_ATmega324__" },
++  { "atmega325", 5, "__AVR_ATmega325__" },
++  { "atmega3250", 5, "__AVR_ATmega3250__" },
++  { "atmega329", 5, "__AVR_ATmega329__" },
++  { "atmega3290", 5, "__AVR_ATmega3290__" },
+   { "atmega64",  5, "__AVR_ATmega64__" },
++  { "atmega644", 5, "__AVR_ATmega644__" },
++  { "atmega645", 5, "__AVR_ATmega645__" },
++  { "atmega6450", 5, "__AVR_ATmega6450__" },
++  { "atmega649", 5, "__AVR_ATmega649__" },
++  { "atmega6490", 5, "__AVR_ATmega6490__" },
+   { "atmega128", 5, "__AVR_ATmega128__" },
++  { "at90can128", 5, "__AVR_AT90CAN128__" },
+   { "at94k",     5, "__AVR_AT94K__" },
+     /* Assembler only.  */
+   { "avr1",      1, NULL },
+diff -ur /tmp/gcc-orig/gcc/config/avr/avr.h ./gcc/config/avr/avr.h
+--- /tmp/gcc-orig/gcc/config/avr/avr.h	Sat Jul 30 15:01:51 2005
++++ ./gcc/config/avr/avr.h	Sat Jul 30 23:03:48 2005
+@@ -2351,12 +2351,12 @@
+    Do not define this macro if it does not need to do anything.  */
+ 
+ #define LINK_SPEC " %{!mmcu*:-m avr2}\
+-%{mmcu=at90s1200|mmcu=attiny1*|mmcu=attiny28:-m avr1} \
+-%{mmcu=attiny22|mmcu=attiny26|mmcu=at90s2*|mmcu=at90s4*|mmcu=at90s8*|mmcu=at90c8*|mmcu=at86rf401:-m avr2}\
++%{mmcu=at90s1200|mmcu=attiny11|mmcu=attiny12|mmcu=attiny15|mmcu=attiny28:-m avr1} \
++%{mmcu=attiny22|mmcu=attiny26|mmcu=at90s2*|mmcu=at90s4*|mmcu=at90s8*|mmcu=at90c8*|mmcu=at86rf401|mmcu=attiny13|mmcu=attiny2313|mmcu=attiny25|mmcu=attiny45|mmcu=attiny85:-m avr2}\
+ %{mmcu=atmega103|mmcu=atmega603|mmcu=at43*|mmcu=at76*:-m avr3}\
+-%{mmcu=atmega8*:-m avr4}\
+-%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64|mmcu=atmega128|mmcu=at94k:-m avr5}\
+-%{mmcu=atmega64|mmcu=atmega128|mmcu=atmega162|mmcu=atmega169: -Tdata 0x800100} "
++%{mmcu=atmega8*|mmcu=atmega48|mmcu=at90pwm*:-m avr4}\
++%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64*|mmcu=atmega128|mmcu=at90can128|mmcu=at94k:-m avr5}\
++%{mmcu=atmega324|mmcu=atmega325|mmcu=atmega3250|mmcu=atmega329|mmcu=atmega3290|mmcu=atmega48|mmcu=atmega88|mmcu=atmega64|mmcu=atmega644|mmcu=atmega645|mmcu=atmega6450|mmcu=atmega649|mmcu=atmega6490|mmcu=atmega128|mmcu=at90can128|mmcu=atmega162|mmcu=atmega164|mmcu=atmega168|mmcu=atmega169: -Tdata 0x800100} "
+ 
+ /* A C string constant that tells the GCC driver program options to
+    pass to the linker.  It can also specify how to translate options
+@@ -2365,7 +2365,7 @@
+    Do not define this macro if it does not need to do anything.  */
+ 
+ #define LIB_SPEC \
+-  "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lc }}}"
++  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lc }}}}}"
+ /* Another C string constant used much like `LINK_SPEC'.  The
+    difference between the two is that `LIB_SPEC' is used at the end
+    of the command given to the linker.
+@@ -2377,7 +2377,7 @@
+ /* No libstdc++ for now.  Empty string doesn't work.  */
+ 
+ #define LIBGCC_SPEC \
+-  "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lgcc }}}"
++  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lgcc }}}}}"
+ /* Another C string constant that tells the GCC driver program how
+    and when to place a reference to `libgcc.a' into the linker
+    command line.  This constant is placed both before and after the
+@@ -2421,23 +2421,45 @@
+ %{mmcu=at90c8534:crtc8534.o%s} \
+ %{mmcu=at90s8535:crts8535.o%s} \
+ %{mmcu=at86rf401:crt86401.o%s} \
++%{mmcu=attiny13:crttn13.o%s} \
++%{mmcu=attiny2313:crttn2313.o%s} \
++%{mmcu=attiny25:crttn25.o%s} \
++%{mmcu=attiny45:crttn45.o%s} \
++%{mmcu=attiny85:crttn85.o%s} \
+ %{mmcu=atmega103|mmcu=avr3:crtm103.o%s} \
+ %{mmcu=atmega603:crtm603.o%s} \
+ %{mmcu=at43usb320:crt43320.o%s} \
+ %{mmcu=at43usb355:crt43355.o%s} \
+ %{mmcu=at76c711:crt76711.o%s} \
+ %{mmcu=atmega8|mmcu=avr4:crtm8.o%s} \
++%{mmcu=atmega48:crtm48.o%s} \
++%{mmcu=atmega88:crtm88.o%s} \
+ %{mmcu=atmega8515:crtm8515.o%s} \
+ %{mmcu=atmega8535:crtm8535.o%s} \
++%{mmcu=at90pwm2:crt90pwm2.o%s} \
++%{mmcu=at90pwm3:crt90pwm3.o%s} \
+ %{mmcu=atmega16:crtm16.o%s} \
+ %{mmcu=atmega161|mmcu=avr5:crtm161.o%s} \
+ %{mmcu=atmega162:crtm162.o%s} \
+ %{mmcu=atmega163:crtm163.o%s} \
++%{mmcu=atmega164:crtm164.o%s} \
++%{mmcu=atmega168:crtm168.o%s} \
+ %{mmcu=atmega169:crtm169.o%s} \
+ %{mmcu=atmega32:crtm32.o%s} \
+ %{mmcu=atmega323:crtm323.o%s} \
++%{mmcu=atmega324:crtm324.o%s} \
++%{mmcu=atmega325:crtm325.o%s} \
++%{mmcu=atmega3250:crtm3250.o%s} \
++%{mmcu=atmega329:crtm329.o%s} \
++%{mmcu=atmega3290:crtm3290.o%s} \
+ %{mmcu=atmega64:crtm64.o%s} \
++%{mmcu=atmega644:crtm644.o%s} \
++%{mmcu=atmega645:crtm645.o%s} \
++%{mmcu=atmega6450:crtm6450.o%s} \
++%{mmcu=atmega649:crtm649.o%s} \
++%{mmcu=atmega6490:crtm6490.o%s} \
+ %{mmcu=atmega128:crtm128.o%s} \
++%{mmcu=at90can128:crtcan128.o%s} \
+ %{mmcu=at94k:crtat94k.o%s}"
+ 
+ #define EXTRA_SPECS {"crt_binutils", CRT_BINUTILS_SPECS},
+diff -ur /tmp/gcc-orig/gcc/config/avr/avr.h.orig ./gcc/config/avr/avr.h.orig
+--- /tmp/gcc-orig/gcc/config/avr/avr.h.orig	Tue Mar  9 03:59:55 2004
++++ ./gcc/config/avr/avr.h.orig	Sat Jul 30 22:27:40 2005
+@@ -2351,12 +2351,12 @@
+    Do not define this macro if it does not need to do anything.  */
+ 
+ #define LINK_SPEC " %{!mmcu*:-m avr2}\
+-%{mmcu=at90s1200|mmcu=attiny1*|mmcu=attiny28:-m avr1} \
+-%{mmcu=attiny22|mmcu=attiny26|mmcu=at90s2*|mmcu=at90s4*|mmcu=at90s8*|mmcu=at90c8*|mmcu=at86rf401:-m avr2}\
++%{mmcu=at90s1200|mmcu=attiny11|mmcu=attiny12|mmcu=attiny15|mmcu=attiny28:-m avr1} \
++%{mmcu=attiny22|mmcu=attiny26|mmcu=at90s2*|mmcu=at90s4*|mmcu=at90s8*|mmcu=at90c8*|mmcu=at86rf401|mmcu=attiny13|mmcu=attiny2313|mmcu=attiny25|mmcu=attiny45|mmcu=attiny85:-m avr2}\
+ %{mmcu=atmega103|mmcu=atmega603|mmcu=at43*|mmcu=at76*:-m avr3}\
+-%{mmcu=atmega8*:-m avr4}\
+-%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64|mmcu=atmega128|mmcu=at94k:-m avr5}\
+-%{mmcu=atmega64|mmcu=atmega128|mmcu=atmega162|mmcu=atmega169: -Tdata 0x800100} "
++%{mmcu=atmega8*|mmcu=atmega48|mmcu=at90pwm*:-m avr4}\
++%{mmcu=atmega16*|mmcu=atmega32*|mmcu=atmega64*|mmcu=atmega128|mmcu=at90can128|mmcu=at94k:-m avr5}\
++%{mmcu=atmega325|mmcu=atmega3250|mmcu=atmega48|mmcu=atmega88|mmcu=atmega64|mmcu=atmega645|mmcu=atmega6450|mmcu=atmega128|mmcu=at90can128|mmcu=at90can128|mmcu=atmega162|mmcu=atmega168|mmcu=atmega169: -Tdata 0x800100} "
+ 
+ /* A C string constant that tells the GCC driver program options to
+    pass to the linker.  It can also specify how to translate options
+@@ -2365,7 +2365,7 @@
+    Do not define this macro if it does not need to do anything.  */
+ 
+ #define LIB_SPEC \
+-  "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lc }}}"
++  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lc }}}}}"
+ /* Another C string constant used much like `LINK_SPEC'.  The
+    difference between the two is that `LIB_SPEC' is used at the end
+    of the command given to the linker.
+@@ -2377,7 +2377,7 @@
+ /* No libstdc++ for now.  Empty string doesn't work.  */
+ 
+ #define LIBGCC_SPEC \
+-  "%{!mmcu=at90s1*:%{!mmcu=attiny1*:%{!mmcu=attiny28: -lgcc }}}"
++  "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lgcc }}}}}"
+ /* Another C string constant that tells the GCC driver program how
+    and when to place a reference to `libgcc.a' into the linker
+    command line.  This constant is placed both before and after the
+@@ -2421,23 +2421,38 @@
+ %{mmcu=at90c8534:crtc8534.o%s} \
+ %{mmcu=at90s8535:crts8535.o%s} \
+ %{mmcu=at86rf401:crt86401.o%s} \
++%{mmcu=attiny13:crttn13.o%s} \
++%{mmcu=attiny2313:crttn2313.o%s} \
++%{mmcu=attiny25:crttn25.o%s} \
++%{mmcu=attiny45:crttn45.o%s} \
++%{mmcu=attiny85:crttn85.o%s} \
+ %{mmcu=atmega103|mmcu=avr3:crtm103.o%s} \
+ %{mmcu=atmega603:crtm603.o%s} \
+ %{mmcu=at43usb320:crt43320.o%s} \
+ %{mmcu=at43usb355:crt43355.o%s} \
+ %{mmcu=at76c711:crt76711.o%s} \
+ %{mmcu=atmega8|mmcu=avr4:crtm8.o%s} \
++%{mmcu=atmega48:crtm48.o%s} \
++%{mmcu=atmega88:crtm88.o%s} \
+ %{mmcu=atmega8515:crtm8515.o%s} \
+ %{mmcu=atmega8535:crtm8535.o%s} \
++%{mmcu=at90pwm2:crt90pwm2.o%s} \
++%{mmcu=at90pwm3:crt90pwm3.o%s} \
+ %{mmcu=atmega16:crtm16.o%s} \
+ %{mmcu=atmega161|mmcu=avr5:crtm161.o%s} \
+ %{mmcu=atmega162:crtm162.o%s} \
+ %{mmcu=atmega163:crtm163.o%s} \
++%{mmcu=atmega168:crtm168.o%s} \
+ %{mmcu=atmega169:crtm169.o%s} \
+ %{mmcu=atmega32:crtm32.o%s} \
+ %{mmcu=atmega323:crtm323.o%s} \
++%{mmcu=atmega325:crtm325.o%s} \
++%{mmcu=atmega3250:crtm3250.o%s} \
+ %{mmcu=atmega64:crtm64.o%s} \
++%{mmcu=atmega645:crtm645.o%s} \
++%{mmcu=atmega6450:crtm6450.o%s} \
+ %{mmcu=atmega128:crtm128.o%s} \
++%{mmcu=at90can128:crtcan128.o%s} \
+ %{mmcu=at94k:crtat94k.o%s}"
+ 
+ #define EXTRA_SPECS {"crt_binutils", CRT_BINUTILS_SPECS},
+@@ -2479,4 +2494,5 @@
+ /* zero register r1 */
+ #define ZERO_REGNO 1
+ 
++#define DWARF2_DEBUGGING_INFO 1
+ #define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
+diff -ur /tmp/gcc-orig/gcc/config/avr/t-avr ./gcc/config/avr/t-avr
+--- /tmp/gcc-orig/gcc/config/avr/t-avr	Mon Apr 25 06:17:34 2005
++++ ./gcc/config/avr/t-avr	Sat Jul 30 23:06:40 2005
+@@ -46,13 +46,22 @@
+ 	mmcu?avr3=mmcu?at43usb320 mmcu?avr3=mmcu?at43usb355 \
+ 	mmcu?avr3=mmcu?at76c711 \
+ 	mmcu?avr4=mmcu?atmega8515 mmcu?avr4=mmcu?atmega8535 \
+-	mmcu?avr4=mmcu?atmega8 \
++	mmcu?avr4=mmcu?atmega8 mmcu?avr4=mmcu?atmega48 \
++	mmcu?avr4=mmcu?atmega88 \
++	mmcu?avr4=mmcu?at90pwm2  mmcu?avr4=mmcu?at90pwm3 \
+ 	mmcu?avr5=mmcu?atmega161 mmcu?avr5=mmcu?atmega162 \
+-	mmcu?avr5=mmcu?atmega163 mmcu?avr5=mmcu?atmega169 \
++	mmcu?avr5=mmcu?atmega163 mmcu?avr5=mmcu?atmega164 \
++	mmcu?avr5=mmcu?atmega168 mmcu?avr5=mmcu?atmega169 \
+ 	mmcu?avr5=mmcu?atmega16 \
+-	mmcu?avr5=mmcu?atmega323 mmcu?avr5=mmcu?atmega32 \
+-	mmcu?avr5=mmcu?atmega64  mmcu?avr5=mmcu?atmega128 \
+-	mmcu?avr5=mmcu?at94k
++	mmcu?avr5=mmcu?atmega323 mmcu?avr5=mmcu?atmega324 \
++	mmcu?avr5=mmcu?atmega325 mmcu?avr5=mmcu?atmega3250 \
++	mmcu?avr5=mmcu?atmega329 mmcu?avr5=mmcu?atmega3290 \
++	mmcu?avr5=mmcu?atmega32 \
++	mmcu?avr5=mmcu?atmega644 mmcu?avr5=mmcu?atmega645 \
++	mmcu?avr5=mmcu?atmega6450 mmcu?avr5=mmcu?atmega649 \
++	mmcu?avr5=mmcu?atmega6490 mmcu?avr5=mmcu?atmega64 \
++	mmcu?avr5=mmcu?atmega128 \
++	mmcu?avr5=mmcu?at94k mmcu?avr5=mmcu?at90can128
+ 
+ MULTILIB_EXCEPTIONS =
+ 
diff --git a/devel/avr-gcc/pkg-descr b/devel/avr-gcc/pkg-descr
index ce45a67dcc8f..ee7778a748e7 100644
--- a/devel/avr-gcc/pkg-descr
+++ b/devel/avr-gcc/pkg-descr
@@ -9,5 +9,16 @@ use without a libstdc++, and it is little tested.
 Supported debugging formats: -gstabs [default] and -gdwarf-2
 Locally hack added: recognizes 0bXXX binary constants
 
+Locally added support for the following AVR devices:
+
+  ATtiny13/ATtiny2313
+  ATtiny25/ATtiny45/ATtiny85
+  ATmega48/ATmega88/ATmega168
+  AT90PWM2/AT90PWM3
+  ATmega164/ATmega324/ATmega644
+  ATmega325/ATmega3250/ATmega645/ATmega6450
+  ATmega329/ATmega3290/ATmega649/ATmega6490
+  AT90CAN128
+
 WWW: http://gcc.gnu.org/
 WWW: http://www.nongnu.org/avr-libc/
diff --git a/devel/avr-gcc/pkg-plist b/devel/avr-gcc/pkg-plist
index e43eb53c9b25..d5964dc522da 100644
--- a/devel/avr-gcc/pkg-plist
+++ b/devel/avr-gcc/pkg-plist
@@ -5,58 +5,58 @@ bin/avr-c++
 bin/avr-cpp
 bin/avr-g++
 bin/avr-gcc
-bin/avr-gcc-3.4.3
+bin/avr-gcc-3.4.4
 bin/avr-gccbug
-lib/gcc/avr/3.4.3/avr3/libgcc.a
-lib/gcc/avr/3.4.3/avr3/libgcov.a
-lib/gcc/avr/3.4.3/avr4/libgcc.a
-lib/gcc/avr/3.4.3/avr4/libgcov.a
-lib/gcc/avr/3.4.3/avr5/libgcc.a
-lib/gcc/avr/3.4.3/avr5/libgcov.a
-lib/gcc/avr/3.4.3/include/README
-lib/gcc/avr/3.4.3/include/fixed
-lib/gcc/avr/3.4.3/include/float.h
-lib/gcc/avr/3.4.3/include/iso646.h
-lib/gcc/avr/3.4.3/include/limits.h
-lib/gcc/avr/3.4.3/include/stdarg.h
-lib/gcc/avr/3.4.3/include/stdbool.h
-lib/gcc/avr/3.4.3/include/stddef.h
-lib/gcc/avr/3.4.3/include/syslimits.h
-lib/gcc/avr/3.4.3/include/unwind.h
-lib/gcc/avr/3.4.3/include/varargs.h
-lib/gcc/avr/3.4.3/install-tools/gsyslimits.h
-lib/gcc/avr/3.4.3/install-tools/include/README
-lib/gcc/avr/3.4.3/install-tools/include/float.h
-lib/gcc/avr/3.4.3/install-tools/include/iso646.h
-lib/gcc/avr/3.4.3/install-tools/include/limits.h
-lib/gcc/avr/3.4.3/install-tools/include/stdarg.h
-lib/gcc/avr/3.4.3/install-tools/include/stdbool.h
-lib/gcc/avr/3.4.3/install-tools/include/stddef.h
-lib/gcc/avr/3.4.3/install-tools/include/unwind.h
-lib/gcc/avr/3.4.3/install-tools/include/varargs.h
-lib/gcc/avr/3.4.3/install-tools/mkheaders.conf
-lib/gcc/avr/3.4.3/libgcc.a
-lib/gcc/avr/3.4.3/libgcov.a
-lib/gcc/avr/3.4.3/specs
-libexec/gcc/avr/3.4.3/cc1
-libexec/gcc/avr/3.4.3/cc1plus
-libexec/gcc/avr/3.4.3/collect2
-libexec/gcc/avr/3.4.3/install-tools/fix-header
-libexec/gcc/avr/3.4.3/install-tools/fixinc.sh
-libexec/gcc/avr/3.4.3/install-tools/fixincl
-libexec/gcc/avr/3.4.3/install-tools/fixproto
-libexec/gcc/avr/3.4.3/install-tools/mkheaders
-libexec/gcc/avr/3.4.3/install-tools/mkinstalldirs
-@dirrm lib/gcc/avr/3.4.3/avr3
-@dirrm lib/gcc/avr/3.4.3/avr4
-@dirrm lib/gcc/avr/3.4.3/avr5
-@dirrm lib/gcc/avr/3.4.3/include
-@dirrm lib/gcc/avr/3.4.3/install-tools/include
-@dirrm lib/gcc/avr/3.4.3/install-tools
-@dirrm lib/gcc/avr/3.4.3
+lib/gcc/avr/3.4.4/avr3/libgcc.a
+lib/gcc/avr/3.4.4/avr3/libgcov.a
+lib/gcc/avr/3.4.4/avr4/libgcc.a
+lib/gcc/avr/3.4.4/avr4/libgcov.a
+lib/gcc/avr/3.4.4/avr5/libgcc.a
+lib/gcc/avr/3.4.4/avr5/libgcov.a
+lib/gcc/avr/3.4.4/include/README
+lib/gcc/avr/3.4.4/include/fixed
+lib/gcc/avr/3.4.4/include/float.h
+lib/gcc/avr/3.4.4/include/iso646.h
+lib/gcc/avr/3.4.4/include/limits.h
+lib/gcc/avr/3.4.4/include/stdarg.h
+lib/gcc/avr/3.4.4/include/stdbool.h
+lib/gcc/avr/3.4.4/include/stddef.h
+lib/gcc/avr/3.4.4/include/syslimits.h
+lib/gcc/avr/3.4.4/include/unwind.h
+lib/gcc/avr/3.4.4/include/varargs.h
+lib/gcc/avr/3.4.4/install-tools/gsyslimits.h
+lib/gcc/avr/3.4.4/install-tools/include/README
+lib/gcc/avr/3.4.4/install-tools/include/float.h
+lib/gcc/avr/3.4.4/install-tools/include/iso646.h
+lib/gcc/avr/3.4.4/install-tools/include/limits.h
+lib/gcc/avr/3.4.4/install-tools/include/stdarg.h
+lib/gcc/avr/3.4.4/install-tools/include/stdbool.h
+lib/gcc/avr/3.4.4/install-tools/include/stddef.h
+lib/gcc/avr/3.4.4/install-tools/include/unwind.h
+lib/gcc/avr/3.4.4/install-tools/include/varargs.h
+lib/gcc/avr/3.4.4/install-tools/mkheaders.conf
+lib/gcc/avr/3.4.4/libgcc.a
+lib/gcc/avr/3.4.4/libgcov.a
+lib/gcc/avr/3.4.4/specs
+libexec/gcc/avr/3.4.4/cc1
+libexec/gcc/avr/3.4.4/cc1plus
+libexec/gcc/avr/3.4.4/collect2
+libexec/gcc/avr/3.4.4/install-tools/fix-header
+libexec/gcc/avr/3.4.4/install-tools/fixinc.sh
+libexec/gcc/avr/3.4.4/install-tools/fixincl
+libexec/gcc/avr/3.4.4/install-tools/fixproto
+libexec/gcc/avr/3.4.4/install-tools/mkheaders
+libexec/gcc/avr/3.4.4/install-tools/mkinstalldirs
+@dirrm lib/gcc/avr/3.4.4/avr3
+@dirrm lib/gcc/avr/3.4.4/avr4
+@dirrm lib/gcc/avr/3.4.4/avr5
+@dirrm lib/gcc/avr/3.4.4/include
+@dirrm lib/gcc/avr/3.4.4/install-tools/include
+@dirrm lib/gcc/avr/3.4.4/install-tools
+@dirrm lib/gcc/avr/3.4.4
 @dirrm lib/gcc/avr
 @dirrm lib/gcc
-@dirrm libexec/gcc/avr/3.4.3/install-tools
-@dirrm libexec/gcc/avr/3.4.3
+@dirrm libexec/gcc/avr/3.4.4/install-tools
+@dirrm libexec/gcc/avr/3.4.4
 @dirrm libexec/gcc/avr
 @dirrm libexec/gcc